From: Chao Xie <chao.xie@marvell.com>
To: <haojian.zhuang@gmail.com>, <haojian.zhuang@linaro.org>,
<mturquette@linaro.org>, <chao.xie@marvell.com>,
<xiechao_mail@163.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 10/12] clk: mmp: add mmp2 DT support for clock driver
Date: Tue, 26 Aug 2014 12:38:22 +0800 [thread overview]
Message-ID: <1409027904-21859-11-git-send-email-chao.xie@marvell.com> (raw)
In-Reply-To: <1409027904-21859-1-git-send-email-chao.xie@marvell.com>
From: Chao Xie <chao.xie@marvell.com>
It adds the DT support for mmp2 clock subsystem.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
.../bindings/clock/marvell-mmp2-clock.txt | 20 ++
drivers/clk/mmp/Makefile | 1 +
drivers/clk/mmp/clk-of-mmp2.c | 307 +++++++++++++++++++++
include/dt-bindings/clock/marvell-mmp2.h | 74 +++++
4 files changed, 402 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
create mode 100644 include/dt-bindings/clock/marvell-mmp2.h
diff --git a/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
new file mode 100644
index 0000000..ad4b409
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
@@ -0,0 +1,20 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index b803fac..25a2bf1 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -5,6 +5,7 @@
obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
+obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
new file mode 100644
index 0000000..3a3e9c2
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -0,0 +1,307 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell-mmp2.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+struct mmp2_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {MMP2_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {MMP2_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {MMP2_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 800000000},
+ {MMP2_CLK_PLL2, "pll2", NULL, CLK_IS_ROOT, 960000000},
+ {MMP2_CLK_USB_PLL, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {MMP2_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {MMP2_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {MMP2_CLK_PLL1_20, "pll1_20", "pll1_4", 1, 5, 0},
+ {MMP2_CLK_PLL1_3, "pll1_3", "pll1", 1, 3, 0},
+ {MMP2_CLK_PLL1_6, "pll1_6", "pll1_3", 1, 2, 0},
+ {MMP2_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {MMP2_CLK_PLL2_2, "pll2_2", "pll2", 1, 2, 0},
+ {MMP2_CLK_PLL2_4, "pll2_4", "pll2_2", 1, 2, 0},
+ {MMP2_CLK_PLL2_8, "pll2_8", "pll2_4", 1, 2, 0},
+ {MMP2_CLK_PLL2_16, "pll2_16", "pll2_8", 1, 2, 0},
+ {MMP2_CLK_PLL2_3, "pll2_3", "pll2", 1, 3, 0},
+ {MMP2_CLK_PLL2_6, "pll2_6", "pll2_3", 1, 2, 0},
+ {MMP2_CLK_PLL2_12, "pll2_12", "pll2_6", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_2, "vctcxo_2", "vctcxo", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_4, "vctcxo_4", "vctcxo_2", 1, 2, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, MMP2_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART3, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {MMP2_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI4, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI5, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x7, 0x3, 0x0, 0, NULL},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
+ {MMP2_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
+ {MMP2_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, APBC_UART3, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x7, 0x3, 0x0, 0, &ssp0_lock},
+ {MMP2_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x7, 0x3, 0x0, 0, &ssp1_lock},
+ {MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
+ {MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
+};
+
+static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh_lock);
+static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
+};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static DEFINE_SPINLOCK(disp1_lock);
+static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static DEFINE_SPINLOCK(ccic1_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static struct mmp_clk_mix_config ccic0_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
+};
+static struct mmp_clk_mix_config ccic1_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
+};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
+ {MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
+ {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
+ {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, 0, &disp1_lock},
+ {0, "ccic0_sphy_div", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+ {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
+ {MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0, "ccic0_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+};
+
+static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+ clk = mmp_clk_register_mix(NULL, "sdh_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names),
+ CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh_lock);
+
+ ccic0_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC0;
+ clk = mmp_clk_register_mix(NULL, "ccic0_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic0_mix_config, &ccic0_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC0_MIX, clk);
+
+ ccic1_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC1;
+ clk = mmp_clk_register_mix(NULL, "ccic1_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic1_mix_config, &ccic1_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC1_MIX, clk);
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init mmp2_clk_init(struct device_node *np)
+{
+ struct mmp2_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, MMP2_NR_CLKS);
+
+ mmp2_pll_init(pxa_unit);
+
+ mmp2_apb_periph_clk_init(pxa_unit);
+
+ mmp2_axi_periph_clk_init(pxa_unit);
+}
+
+CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
diff --git a/include/dt-bindings/clock/marvell-mmp2.h b/include/dt-bindings/clock/marvell-mmp2.h
new file mode 100644
index 0000000..591f7fb
--- /dev/null
+++ b/include/dt-bindings/clock/marvell-mmp2.h
@@ -0,0 +1,74 @@
+#ifndef __DTS_MARVELL_MMP2_CLOCK_H
+#define __DTS_MARVELL_MMP2_CLOCK_H
+
+/* fixed clocks and plls */
+#define MMP2_CLK_CLK32 1
+#define MMP2_CLK_VCTCXO 2
+#define MMP2_CLK_PLL1 3
+#define MMP2_CLK_PLL1_2 8
+#define MMP2_CLK_PLL1_4 9
+#define MMP2_CLK_PLL1_8 10
+#define MMP2_CLK_PLL1_16 11
+#define MMP2_CLK_PLL1_3 12
+#define MMP2_CLK_PLL1_6 13
+#define MMP2_CLK_PLL1_12 14
+#define MMP2_CLK_PLL1_20 15
+#define MMP2_CLK_PLL2 16
+#define MMP2_CLK_PLL2_2 17
+#define MMP2_CLK_PLL2_4 18
+#define MMP2_CLK_PLL2_8 19
+#define MMP2_CLK_PLL2_16 20
+#define MMP2_CLK_PLL2_3 21
+#define MMP2_CLK_PLL2_6 22
+#define MMP2_CLK_PLL2_12 23
+#define MMP2_CLK_VCTCXO_2 24
+#define MMP2_CLK_VCTCXO_4 25
+#define MMP2_CLK_UART_PLL 26
+#define MMP2_CLK_USB_PLL 27
+
+/* apb periphrals */
+#define MMP2_CLK_TWSI0 60
+#define MMP2_CLK_TWSI1 61
+#define MMP2_CLK_TWSI2 62
+#define MMP2_CLK_TWSI3 63
+#define MMP2_CLK_TWSI4 64
+#define MMP2_CLK_TWSI5 65
+#define MMP2_CLK_GPIO 66
+#define MMP2_CLK_KPC 67
+#define MMP2_CLK_RTC 68
+#define MMP2_CLK_PWM0 69
+#define MMP2_CLK_PWM1 70
+#define MMP2_CLK_PWM2 71
+#define MMP2_CLK_PWM3 72
+#define MMP2_CLK_UART0 73
+#define MMP2_CLK_UART1 74
+#define MMP2_CLK_UART2 75
+#define MMP2_CLK_UART3 76
+#define MMP2_CLK_SSP0 77
+#define MMP2_CLK_SSP1 78
+#define MMP2_CLK_SSP2 79
+#define MMP2_CLK_SSP3 80
+
+/* axi periphrals */
+#define MMP2_CLK_SDH0 101
+#define MMP2_CLK_SDH1 102
+#define MMP2_CLK_SDH2 103
+#define MMP2_CLK_SDH3 104
+#define MMP2_CLK_USB 105
+#define MMP2_CLK_DISP0 106
+#define MMP2_CLK_DISP0_MUX 107
+#define MMP2_CLK_DISP0_SPHY 108
+#define MMP2_CLK_DISP1 109
+#define MMP2_CLK_DISP1_MUX 110
+#define MMP2_CLK_CCIC_ARBITER 111
+#define MMP2_CLK_CCIC0 112
+#define MMP2_CLK_CCIC0_MIX 113
+#define MMP2_CLK_CCIC0_PHY 114
+#define MMP2_CLK_CCIC0_SPHY 115
+#define MMP2_CLK_CCIC1 116
+#define MMP2_CLK_CCIC1_MIX 117
+#define MMP2_CLK_CCIC1_PHY 118
+#define MMP2_CLK_CCIC1_SPHY 119
+
+#define MMP2_NR_CLKS 200
+#endif
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Chao Xie <chao.xie@marvell.com>
To: haojian.zhuang@gmail.com, haojian.zhuang@linaro.org,
mturquette@linaro.org, chao.xie@marvell.com,
xiechao_mail@163.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 10/12] clk: mmp: add mmp2 DT support for clock driver
Date: Tue, 26 Aug 2014 12:38:22 +0800 [thread overview]
Message-ID: <1409027904-21859-11-git-send-email-chao.xie@marvell.com> (raw)
In-Reply-To: <1409027904-21859-1-git-send-email-chao.xie@marvell.com>
From: Chao Xie <chao.xie@marvell.com>
It adds the DT support for mmp2 clock subsystem.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
.../bindings/clock/marvell-mmp2-clock.txt | 20 ++
drivers/clk/mmp/Makefile | 1 +
drivers/clk/mmp/clk-of-mmp2.c | 307 +++++++++++++++++++++
include/dt-bindings/clock/marvell-mmp2.h | 74 +++++
4 files changed, 402 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
create mode 100644 include/dt-bindings/clock/marvell-mmp2.h
diff --git a/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
new file mode 100644
index 0000000..ad4b409
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
@@ -0,0 +1,20 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index b803fac..25a2bf1 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -5,6 +5,7 @@
obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
+obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
new file mode 100644
index 0000000..3a3e9c2
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -0,0 +1,307 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell-mmp2.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+struct mmp2_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {MMP2_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {MMP2_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {MMP2_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 800000000},
+ {MMP2_CLK_PLL2, "pll2", NULL, CLK_IS_ROOT, 960000000},
+ {MMP2_CLK_USB_PLL, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {MMP2_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {MMP2_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {MMP2_CLK_PLL1_20, "pll1_20", "pll1_4", 1, 5, 0},
+ {MMP2_CLK_PLL1_3, "pll1_3", "pll1", 1, 3, 0},
+ {MMP2_CLK_PLL1_6, "pll1_6", "pll1_3", 1, 2, 0},
+ {MMP2_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {MMP2_CLK_PLL2_2, "pll2_2", "pll2", 1, 2, 0},
+ {MMP2_CLK_PLL2_4, "pll2_4", "pll2_2", 1, 2, 0},
+ {MMP2_CLK_PLL2_8, "pll2_8", "pll2_4", 1, 2, 0},
+ {MMP2_CLK_PLL2_16, "pll2_16", "pll2_8", 1, 2, 0},
+ {MMP2_CLK_PLL2_3, "pll2_3", "pll2", 1, 3, 0},
+ {MMP2_CLK_PLL2_6, "pll2_6", "pll2_3", 1, 2, 0},
+ {MMP2_CLK_PLL2_12, "pll2_12", "pll2_6", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_2, "vctcxo_2", "vctcxo", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_4, "vctcxo_4", "vctcxo_2", 1, 2, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, MMP2_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART3, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {MMP2_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI4, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI5, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x7, 0x3, 0x0, 0, NULL},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
+ {MMP2_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
+ {MMP2_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, APBC_UART3, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x7, 0x3, 0x0, 0, &ssp0_lock},
+ {MMP2_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x7, 0x3, 0x0, 0, &ssp1_lock},
+ {MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
+ {MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
+};
+
+static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh_lock);
+static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
+};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static DEFINE_SPINLOCK(disp1_lock);
+static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static DEFINE_SPINLOCK(ccic1_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static struct mmp_clk_mix_config ccic0_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
+};
+static struct mmp_clk_mix_config ccic1_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
+};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
+ {MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
+ {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
+ {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, 0, &disp1_lock},
+ {0, "ccic0_sphy_div", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+ {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
+ {MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0, "ccic0_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+};
+
+static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+ clk = mmp_clk_register_mix(NULL, "sdh_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names),
+ CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh_lock);
+
+ ccic0_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC0;
+ clk = mmp_clk_register_mix(NULL, "ccic0_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic0_mix_config, &ccic0_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC0_MIX, clk);
+
+ ccic1_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC1;
+ clk = mmp_clk_register_mix(NULL, "ccic1_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic1_mix_config, &ccic1_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC1_MIX, clk);
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init mmp2_clk_init(struct device_node *np)
+{
+ struct mmp2_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, MMP2_NR_CLKS);
+
+ mmp2_pll_init(pxa_unit);
+
+ mmp2_apb_periph_clk_init(pxa_unit);
+
+ mmp2_axi_periph_clk_init(pxa_unit);
+}
+
+CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
diff --git a/include/dt-bindings/clock/marvell-mmp2.h b/include/dt-bindings/clock/marvell-mmp2.h
new file mode 100644
index 0000000..591f7fb
--- /dev/null
+++ b/include/dt-bindings/clock/marvell-mmp2.h
@@ -0,0 +1,74 @@
+#ifndef __DTS_MARVELL_MMP2_CLOCK_H
+#define __DTS_MARVELL_MMP2_CLOCK_H
+
+/* fixed clocks and plls */
+#define MMP2_CLK_CLK32 1
+#define MMP2_CLK_VCTCXO 2
+#define MMP2_CLK_PLL1 3
+#define MMP2_CLK_PLL1_2 8
+#define MMP2_CLK_PLL1_4 9
+#define MMP2_CLK_PLL1_8 10
+#define MMP2_CLK_PLL1_16 11
+#define MMP2_CLK_PLL1_3 12
+#define MMP2_CLK_PLL1_6 13
+#define MMP2_CLK_PLL1_12 14
+#define MMP2_CLK_PLL1_20 15
+#define MMP2_CLK_PLL2 16
+#define MMP2_CLK_PLL2_2 17
+#define MMP2_CLK_PLL2_4 18
+#define MMP2_CLK_PLL2_8 19
+#define MMP2_CLK_PLL2_16 20
+#define MMP2_CLK_PLL2_3 21
+#define MMP2_CLK_PLL2_6 22
+#define MMP2_CLK_PLL2_12 23
+#define MMP2_CLK_VCTCXO_2 24
+#define MMP2_CLK_VCTCXO_4 25
+#define MMP2_CLK_UART_PLL 26
+#define MMP2_CLK_USB_PLL 27
+
+/* apb periphrals */
+#define MMP2_CLK_TWSI0 60
+#define MMP2_CLK_TWSI1 61
+#define MMP2_CLK_TWSI2 62
+#define MMP2_CLK_TWSI3 63
+#define MMP2_CLK_TWSI4 64
+#define MMP2_CLK_TWSI5 65
+#define MMP2_CLK_GPIO 66
+#define MMP2_CLK_KPC 67
+#define MMP2_CLK_RTC 68
+#define MMP2_CLK_PWM0 69
+#define MMP2_CLK_PWM1 70
+#define MMP2_CLK_PWM2 71
+#define MMP2_CLK_PWM3 72
+#define MMP2_CLK_UART0 73
+#define MMP2_CLK_UART1 74
+#define MMP2_CLK_UART2 75
+#define MMP2_CLK_UART3 76
+#define MMP2_CLK_SSP0 77
+#define MMP2_CLK_SSP1 78
+#define MMP2_CLK_SSP2 79
+#define MMP2_CLK_SSP3 80
+
+/* axi periphrals */
+#define MMP2_CLK_SDH0 101
+#define MMP2_CLK_SDH1 102
+#define MMP2_CLK_SDH2 103
+#define MMP2_CLK_SDH3 104
+#define MMP2_CLK_USB 105
+#define MMP2_CLK_DISP0 106
+#define MMP2_CLK_DISP0_MUX 107
+#define MMP2_CLK_DISP0_SPHY 108
+#define MMP2_CLK_DISP1 109
+#define MMP2_CLK_DISP1_MUX 110
+#define MMP2_CLK_CCIC_ARBITER 111
+#define MMP2_CLK_CCIC0 112
+#define MMP2_CLK_CCIC0_MIX 113
+#define MMP2_CLK_CCIC0_PHY 114
+#define MMP2_CLK_CCIC0_SPHY 115
+#define MMP2_CLK_CCIC1 116
+#define MMP2_CLK_CCIC1_MIX 117
+#define MMP2_CLK_CCIC1_PHY 118
+#define MMP2_CLK_CCIC1_SPHY 119
+
+#define MMP2_NR_CLKS 200
+#endif
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: chao.xie@marvell.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/12] clk: mmp: add mmp2 DT support for clock driver
Date: Tue, 26 Aug 2014 12:38:22 +0800 [thread overview]
Message-ID: <1409027904-21859-11-git-send-email-chao.xie@marvell.com> (raw)
In-Reply-To: <1409027904-21859-1-git-send-email-chao.xie@marvell.com>
From: Chao Xie <chao.xie@marvell.com>
It adds the DT support for mmp2 clock subsystem.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
.../bindings/clock/marvell-mmp2-clock.txt | 20 ++
drivers/clk/mmp/Makefile | 1 +
drivers/clk/mmp/clk-of-mmp2.c | 307 +++++++++++++++++++++
include/dt-bindings/clock/marvell-mmp2.h | 74 +++++
4 files changed, 402 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
create mode 100644 include/dt-bindings/clock/marvell-mmp2.h
diff --git a/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
new file mode 100644
index 0000000..ad4b409
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell-mmp2-clock.txt
@@ -0,0 +1,20 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index b803fac..25a2bf1 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -5,6 +5,7 @@
obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
+obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
new file mode 100644
index 0000000..3a3e9c2
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -0,0 +1,307 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell-mmp2.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+struct mmp2_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {MMP2_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {MMP2_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {MMP2_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 800000000},
+ {MMP2_CLK_PLL2, "pll2", NULL, CLK_IS_ROOT, 960000000},
+ {MMP2_CLK_USB_PLL, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {MMP2_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {MMP2_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {MMP2_CLK_PLL1_20, "pll1_20", "pll1_4", 1, 5, 0},
+ {MMP2_CLK_PLL1_3, "pll1_3", "pll1", 1, 3, 0},
+ {MMP2_CLK_PLL1_6, "pll1_6", "pll1_3", 1, 2, 0},
+ {MMP2_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {MMP2_CLK_PLL2_2, "pll2_2", "pll2", 1, 2, 0},
+ {MMP2_CLK_PLL2_4, "pll2_4", "pll2_2", 1, 2, 0},
+ {MMP2_CLK_PLL2_8, "pll2_8", "pll2_4", 1, 2, 0},
+ {MMP2_CLK_PLL2_16, "pll2_16", "pll2_8", 1, 2, 0},
+ {MMP2_CLK_PLL2_3, "pll2_3", "pll2", 1, 3, 0},
+ {MMP2_CLK_PLL2_6, "pll2_6", "pll2_3", 1, 2, 0},
+ {MMP2_CLK_PLL2_12, "pll2_12", "pll2_6", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_2, "vctcxo_2", "vctcxo", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_4, "vctcxo_4", "vctcxo_2", 1, 2, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, MMP2_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART3, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {MMP2_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI4, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI5, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {MMP2_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x7, 0x3, 0x0, 0, NULL},
+ {MMP2_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x7, 0x3, 0x0, 0, NULL},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
+ {MMP2_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
+ {MMP2_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, APBC_UART3, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x7, 0x3, 0x0, 0, &ssp0_lock},
+ {MMP2_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x7, 0x3, 0x0, 0, &ssp1_lock},
+ {MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
+ {MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
+};
+
+static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh_lock);
+static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
+};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static DEFINE_SPINLOCK(disp1_lock);
+static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static DEFINE_SPINLOCK(ccic1_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static struct mmp_clk_mix_config ccic0_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
+};
+static struct mmp_clk_mix_config ccic1_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
+};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
+ {MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
+ {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
+ {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, 0, &disp1_lock},
+ {0, "ccic0_sphy_div", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+ {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
+ {MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0, "ccic0_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+};
+
+static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+ clk = mmp_clk_register_mix(NULL, "sdh_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names),
+ CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh_lock);
+
+ ccic0_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC0;
+ clk = mmp_clk_register_mix(NULL, "ccic0_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic0_mix_config, &ccic0_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC0_MIX, clk);
+
+ ccic1_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC1;
+ clk = mmp_clk_register_mix(NULL, "ccic1_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic1_mix_config, &ccic1_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC1_MIX, clk);
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init mmp2_clk_init(struct device_node *np)
+{
+ struct mmp2_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, MMP2_NR_CLKS);
+
+ mmp2_pll_init(pxa_unit);
+
+ mmp2_apb_periph_clk_init(pxa_unit);
+
+ mmp2_axi_periph_clk_init(pxa_unit);
+}
+
+CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
diff --git a/include/dt-bindings/clock/marvell-mmp2.h b/include/dt-bindings/clock/marvell-mmp2.h
new file mode 100644
index 0000000..591f7fb
--- /dev/null
+++ b/include/dt-bindings/clock/marvell-mmp2.h
@@ -0,0 +1,74 @@
+#ifndef __DTS_MARVELL_MMP2_CLOCK_H
+#define __DTS_MARVELL_MMP2_CLOCK_H
+
+/* fixed clocks and plls */
+#define MMP2_CLK_CLK32 1
+#define MMP2_CLK_VCTCXO 2
+#define MMP2_CLK_PLL1 3
+#define MMP2_CLK_PLL1_2 8
+#define MMP2_CLK_PLL1_4 9
+#define MMP2_CLK_PLL1_8 10
+#define MMP2_CLK_PLL1_16 11
+#define MMP2_CLK_PLL1_3 12
+#define MMP2_CLK_PLL1_6 13
+#define MMP2_CLK_PLL1_12 14
+#define MMP2_CLK_PLL1_20 15
+#define MMP2_CLK_PLL2 16
+#define MMP2_CLK_PLL2_2 17
+#define MMP2_CLK_PLL2_4 18
+#define MMP2_CLK_PLL2_8 19
+#define MMP2_CLK_PLL2_16 20
+#define MMP2_CLK_PLL2_3 21
+#define MMP2_CLK_PLL2_6 22
+#define MMP2_CLK_PLL2_12 23
+#define MMP2_CLK_VCTCXO_2 24
+#define MMP2_CLK_VCTCXO_4 25
+#define MMP2_CLK_UART_PLL 26
+#define MMP2_CLK_USB_PLL 27
+
+/* apb periphrals */
+#define MMP2_CLK_TWSI0 60
+#define MMP2_CLK_TWSI1 61
+#define MMP2_CLK_TWSI2 62
+#define MMP2_CLK_TWSI3 63
+#define MMP2_CLK_TWSI4 64
+#define MMP2_CLK_TWSI5 65
+#define MMP2_CLK_GPIO 66
+#define MMP2_CLK_KPC 67
+#define MMP2_CLK_RTC 68
+#define MMP2_CLK_PWM0 69
+#define MMP2_CLK_PWM1 70
+#define MMP2_CLK_PWM2 71
+#define MMP2_CLK_PWM3 72
+#define MMP2_CLK_UART0 73
+#define MMP2_CLK_UART1 74
+#define MMP2_CLK_UART2 75
+#define MMP2_CLK_UART3 76
+#define MMP2_CLK_SSP0 77
+#define MMP2_CLK_SSP1 78
+#define MMP2_CLK_SSP2 79
+#define MMP2_CLK_SSP3 80
+
+/* axi periphrals */
+#define MMP2_CLK_SDH0 101
+#define MMP2_CLK_SDH1 102
+#define MMP2_CLK_SDH2 103
+#define MMP2_CLK_SDH3 104
+#define MMP2_CLK_USB 105
+#define MMP2_CLK_DISP0 106
+#define MMP2_CLK_DISP0_MUX 107
+#define MMP2_CLK_DISP0_SPHY 108
+#define MMP2_CLK_DISP1 109
+#define MMP2_CLK_DISP1_MUX 110
+#define MMP2_CLK_CCIC_ARBITER 111
+#define MMP2_CLK_CCIC0 112
+#define MMP2_CLK_CCIC0_MIX 113
+#define MMP2_CLK_CCIC0_PHY 114
+#define MMP2_CLK_CCIC0_SPHY 115
+#define MMP2_CLK_CCIC1 116
+#define MMP2_CLK_CCIC1_MIX 117
+#define MMP2_CLK_CCIC1_PHY 118
+#define MMP2_CLK_CCIC1_SPHY 119
+
+#define MMP2_NR_CLKS 200
+#endif
--
1.8.3.2
next prev parent reply other threads:[~2014-08-26 4:37 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 4:38 [PATCH 00/12] clk: mmp: clock device tree support Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 01/12] clk: mmp: add prefix "mmp" for structures defined for clk-frac Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 02/12] clk: mmp: add spin lock " Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-09-03 18:04 ` Mike Turquette
2014-09-03 18:04 ` Mike Turquette
2014-09-03 18:04 ` Mike Turquette
2014-09-10 1:30 ` Chao Xie
2014-09-10 1:30 ` Chao Xie
2014-09-10 1:30 ` Chao Xie
2014-08-26 4:38 ` [PATCH 03/12] clk: mmp: add init callback " Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 04/12] clk: mmp: move definiton of mmp_clk_frac to clk.h Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 05/12] clk: mmp: add clock type mix Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 06/12] clk: mmp: add mmp private gate clock Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-09-03 17:55 ` Mike Turquette
2014-09-03 17:55 ` Mike Turquette
2014-09-03 17:55 ` Mike Turquette
2014-09-04 4:02 ` Chao Xie
2014-09-04 4:02 ` Chao Xie
2014-09-04 4:02 ` Chao Xie
2014-09-04 4:16 ` Chen-Yu Tsai
2014-09-04 4:16 ` Chen-Yu Tsai
2014-09-04 4:16 ` Chen-Yu Tsai
2014-08-26 4:38 ` [PATCH 07/12] clk: mmp: add basic support functions for DT support Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 08/12] clk: mmp: add pxa168 DT support for clock driver Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 09/12] clk: mmp: add pxa910 " Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie [this message]
2014-08-26 4:38 ` [PATCH 10/12] clk: mmp: add mmp2 " Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 11/12] arm: mmp: Make all the dts file to be compiled by Makefile Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` [PATCH 12/12] arm: mmp: Make use of the DT supported clock Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:38 ` Chao Xie
2014-08-26 4:55 ` [PATCH 00/12] clk: mmp: clock device tree support Haojian Zhuang
2014-08-26 4:55 ` Haojian Zhuang
2014-08-26 4:55 ` Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409027904-21859-11-git-send-email-chao.xie@marvell.com \
--to=chao.xie@marvell.com \
--cc=devicetree@vger.kernel.org \
--cc=haojian.zhuang@gmail.com \
--cc=haojian.zhuang@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=xiechao_mail@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.