* [PATCH v6 0/3] Qualcomm Resource Power Manager driver
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Rob Herring, Mark Brown, Lee Jones
Cc: Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman, Kumar Gala,
Josh Cartwright, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v5:
- Clarified dt binding
- Converted regulator qcom,force-mode to enum instead of multi-boolean
- Remove unecessary version handshake
- Cleaned up naming of RPM resources between different RPM versions
- Updated regulator qcom,force-mode parsing
- Updated regulator qcom,power-mode-* parsing
- Cleanups in rpm driver
- Dropped dev_get_qcom_rpm helper function
Changes since v4:
- Moved RPM driver to mfd
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
mfd: devicetree: bindings: Add Qualcomm RPM DT binding
mfd: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++
include/linux/mfd/qcom_rpm.h | 10 +
9 files changed, 1816 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
create mode 100644 include/linux/mfd/qcom_rpm.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 0/3] Qualcomm Resource Power Manager driver
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Rob Herring, Mark Brown, Lee Jones
Cc: Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman, Kumar Gala,
Josh Cartwright, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v5:
- Clarified dt binding
- Converted regulator qcom,force-mode to enum instead of multi-boolean
- Remove unecessary version handshake
- Cleaned up naming of RPM resources between different RPM versions
- Updated regulator qcom,force-mode parsing
- Updated regulator qcom,power-mode-* parsing
- Cleanups in rpm driver
- Dropped dev_get_qcom_rpm helper function
Changes since v4:
- Moved RPM driver to mfd
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
mfd: devicetree: bindings: Add Qualcomm RPM DT binding
mfd: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++
include/linux/mfd/qcom_rpm.h | 10 +
9 files changed, 1816 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
create mode 100644 include/linux/mfd/qcom_rpm.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 0/3] Qualcomm Resource Power Manager driver
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: linux-arm-kernel
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v5:
- Clarified dt binding
- Converted regulator qcom,force-mode to enum instead of multi-boolean
- Remove unecessary version handshake
- Cleaned up naming of RPM resources between different RPM versions
- Updated regulator qcom,force-mode parsing
- Updated regulator qcom,power-mode-* parsing
- Cleanups in rpm driver
- Dropped dev_get_qcom_rpm helper function
Changes since v4:
- Moved RPM driver to mfd
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
mfd: devicetree: bindings: Add Qualcomm RPM DT binding
mfd: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++
include/linux/mfd/qcom_rpm.h | 10 +
9 files changed, 1816 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
create mode 100644 include/linux/mfd/qcom_rpm.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
2014-08-26 4:58 ` Bjorn Andersson
(?)
@ 2014-08-26 4:58 ` Bjorn Andersson
-1 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Rob Herring, Mark Brown, Lee Jones
Cc: Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman, Kumar Gala,
Josh Cartwright, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
2 files changed, 400 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/mfd/qcom,rpm.txt b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
new file mode 100644
index 0000000..e2cc987
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
@@ -0,0 +1,246 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the RPM:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4,
+ QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2,
+ QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4,
+ QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <u32>
+ Defintion: indicates that the regulator should be forced to a
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
+ select its own mode based on
+ realtime current draw, only for:
+ qcom,rpm-pm8921-smps,
+ qcom,rpm-pm8921-ftsmps
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: select that the power supply should operate in hysteretic
+ mode, instead of the default pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LDO0 - QCOM_RPM_PM8058_LDO25,
+ QCOM_RPM_PM8821_LDO1,
+ QCOM_RPM_PM8901_LDO0 - QCOM_RPM_PM8901_LDO6,
+ QCOM_RPM_PM8921_LDO1 - QCOM_RPM_PM8921_LDO29
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode:
+ Usage: optional
+ Value type: <u32>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
+ mode, i.e. to act as a switch
+ and not regulate, only for:
+ qcom,rpm-pm8921-pldo,
+ qcom,rpm-pm8921-nldo,
+ qcom,rpm-pm8921-nldo1200
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_NCP,
+ QCOM_RPM_PM8921_NCP
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LVS0 - QCOM_RPM_PM8058_LVS1,
+ QCOM_RPM_PM8901_LVS0 - QCOM_RPM_PM8901_LVS3,
+ QCOM_RPM_PM8901_MVS,
+ QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7,
+ QCOM_RPM_PM8921_MVS
+
+= EXAMPLE
+
+ #include <dt-bindings/mfd/qcom,rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_smps1: pm8921-smps1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_SMPS1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/mfd/qcom,rpm.h b/include/dt-bindings/mfd/qcom,rpm.h
new file mode 100644
index 0000000..388a6f3
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom,rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_LDO1 55
+#define QCOM_RPM_PM8821_SMPS1 56
+#define QCOM_RPM_PM8821_SMPS2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_LDO1 77
+#define QCOM_RPM_PM8921_LDO2 78
+#define QCOM_RPM_PM8921_LDO3 79
+#define QCOM_RPM_PM8921_LDO4 80
+#define QCOM_RPM_PM8921_LDO5 81
+#define QCOM_RPM_PM8921_LDO6 82
+#define QCOM_RPM_PM8921_LDO7 83
+#define QCOM_RPM_PM8921_LDO8 84
+#define QCOM_RPM_PM8921_LDO9 85
+#define QCOM_RPM_PM8921_LDO10 86
+#define QCOM_RPM_PM8921_LDO11 87
+#define QCOM_RPM_PM8921_LDO12 88
+#define QCOM_RPM_PM8921_LDO13 89
+#define QCOM_RPM_PM8921_LDO14 90
+#define QCOM_RPM_PM8921_LDO15 91
+#define QCOM_RPM_PM8921_LDO16 92
+#define QCOM_RPM_PM8921_LDO17 93
+#define QCOM_RPM_PM8921_LDO18 94
+#define QCOM_RPM_PM8921_LDO19 95
+#define QCOM_RPM_PM8921_LDO20 96
+#define QCOM_RPM_PM8921_LDO21 97
+#define QCOM_RPM_PM8921_LDO22 98
+#define QCOM_RPM_PM8921_LDO23 99
+#define QCOM_RPM_PM8921_LDO24 100
+#define QCOM_RPM_PM8921_LDO25 101
+#define QCOM_RPM_PM8921_LDO26 102
+#define QCOM_RPM_PM8921_LDO27 103
+#define QCOM_RPM_PM8921_LDO28 104
+#define QCOM_RPM_PM8921_LDO29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_SMPS1 115
+#define QCOM_RPM_PM8921_SMPS2 116
+#define QCOM_RPM_PM8921_SMPS3 117
+#define QCOM_RPM_PM8921_SMPS4 118
+#define QCOM_RPM_PM8921_SMPS5 119
+#define QCOM_RPM_PM8921_SMPS6 120
+#define QCOM_RPM_PM8921_SMPS7 121
+#define QCOM_RPM_PM8921_SMPS8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE 0
+#define QCOM_RPM_FORCE_MODE_LPM 1
+#define QCOM_RPM_FORCE_MODE_HPM 2
+#define QCOM_RPM_FORCE_MODE_AUTO 3
+#define QCOM_RPM_FORCE_MODE_BYPASS 4
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Rob Herring, Mark Brown, Lee Jones
Cc: Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman, Kumar Gala,
Josh Cartwright, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
2 files changed, 400 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/mfd/qcom,rpm.txt b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
new file mode 100644
index 0000000..e2cc987
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
@@ -0,0 +1,246 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the RPM:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4,
+ QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2,
+ QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4,
+ QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <u32>
+ Defintion: indicates that the regulator should be forced to a
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
+ select its own mode based on
+ realtime current draw, only for:
+ qcom,rpm-pm8921-smps,
+ qcom,rpm-pm8921-ftsmps
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: select that the power supply should operate in hysteretic
+ mode, instead of the default pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LDO0 - QCOM_RPM_PM8058_LDO25,
+ QCOM_RPM_PM8821_LDO1,
+ QCOM_RPM_PM8901_LDO0 - QCOM_RPM_PM8901_LDO6,
+ QCOM_RPM_PM8921_LDO1 - QCOM_RPM_PM8921_LDO29
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode:
+ Usage: optional
+ Value type: <u32>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
+ mode, i.e. to act as a switch
+ and not regulate, only for:
+ qcom,rpm-pm8921-pldo,
+ qcom,rpm-pm8921-nldo,
+ qcom,rpm-pm8921-nldo1200
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_NCP,
+ QCOM_RPM_PM8921_NCP
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LVS0 - QCOM_RPM_PM8058_LVS1,
+ QCOM_RPM_PM8901_LVS0 - QCOM_RPM_PM8901_LVS3,
+ QCOM_RPM_PM8901_MVS,
+ QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7,
+ QCOM_RPM_PM8921_MVS
+
+= EXAMPLE
+
+ #include <dt-bindings/mfd/qcom,rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_smps1: pm8921-smps1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_SMPS1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/mfd/qcom,rpm.h b/include/dt-bindings/mfd/qcom,rpm.h
new file mode 100644
index 0000000..388a6f3
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom,rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_LDO1 55
+#define QCOM_RPM_PM8821_SMPS1 56
+#define QCOM_RPM_PM8821_SMPS2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_LDO1 77
+#define QCOM_RPM_PM8921_LDO2 78
+#define QCOM_RPM_PM8921_LDO3 79
+#define QCOM_RPM_PM8921_LDO4 80
+#define QCOM_RPM_PM8921_LDO5 81
+#define QCOM_RPM_PM8921_LDO6 82
+#define QCOM_RPM_PM8921_LDO7 83
+#define QCOM_RPM_PM8921_LDO8 84
+#define QCOM_RPM_PM8921_LDO9 85
+#define QCOM_RPM_PM8921_LDO10 86
+#define QCOM_RPM_PM8921_LDO11 87
+#define QCOM_RPM_PM8921_LDO12 88
+#define QCOM_RPM_PM8921_LDO13 89
+#define QCOM_RPM_PM8921_LDO14 90
+#define QCOM_RPM_PM8921_LDO15 91
+#define QCOM_RPM_PM8921_LDO16 92
+#define QCOM_RPM_PM8921_LDO17 93
+#define QCOM_RPM_PM8921_LDO18 94
+#define QCOM_RPM_PM8921_LDO19 95
+#define QCOM_RPM_PM8921_LDO20 96
+#define QCOM_RPM_PM8921_LDO21 97
+#define QCOM_RPM_PM8921_LDO22 98
+#define QCOM_RPM_PM8921_LDO23 99
+#define QCOM_RPM_PM8921_LDO24 100
+#define QCOM_RPM_PM8921_LDO25 101
+#define QCOM_RPM_PM8921_LDO26 102
+#define QCOM_RPM_PM8921_LDO27 103
+#define QCOM_RPM_PM8921_LDO28 104
+#define QCOM_RPM_PM8921_LDO29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_SMPS1 115
+#define QCOM_RPM_PM8921_SMPS2 116
+#define QCOM_RPM_PM8921_SMPS3 117
+#define QCOM_RPM_PM8921_SMPS4 118
+#define QCOM_RPM_PM8921_SMPS5 119
+#define QCOM_RPM_PM8921_SMPS6 120
+#define QCOM_RPM_PM8921_SMPS7 121
+#define QCOM_RPM_PM8921_SMPS8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE 0
+#define QCOM_RPM_FORCE_MODE_LPM 1
+#define QCOM_RPM_FORCE_MODE_HPM 2
+#define QCOM_RPM_FORCE_MODE_AUTO 3
+#define QCOM_RPM_FORCE_MODE_BYPASS 4
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: linux-arm-kernel
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
2 files changed, 400 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/mfd/qcom,rpm.txt b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
new file mode 100644
index 0000000..e2cc987
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,rpm.txt
@@ -0,0 +1,246 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the RPM:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4,
+ QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2,
+ QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4,
+ QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <u32>
+ Defintion: indicates that the regulator should be forced to a
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
+ select its own mode based on
+ realtime current draw, only for:
+ qcom,rpm-pm8921-smps,
+ qcom,rpm-pm8921-ftsmps
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: select that the power supply should operate in hysteretic
+ mode, instead of the default pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LDO0 - QCOM_RPM_PM8058_LDO25,
+ QCOM_RPM_PM8821_LDO1,
+ QCOM_RPM_PM8901_LDO0 - QCOM_RPM_PM8901_LDO6,
+ QCOM_RPM_PM8921_LDO1 - QCOM_RPM_PM8921_LDO29
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode:
+ Usage: optional
+ Value type: <u32>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
+ mode, i.e. to act as a switch
+ and not regulate, only for:
+ qcom,rpm-pm8921-pldo,
+ qcom,rpm-pm8921-nldo,
+ qcom,rpm-pm8921-nldo1200
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_NCP,
+ QCOM_RPM_PM8921_NCP
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/mfd/qcom/qcom,rpm.h>
+ must be one of:
+ QCOM_RPM_PM8058_LVS0 - QCOM_RPM_PM8058_LVS1,
+ QCOM_RPM_PM8901_LVS0 - QCOM_RPM_PM8901_LVS3,
+ QCOM_RPM_PM8901_MVS,
+ QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7,
+ QCOM_RPM_PM8921_MVS
+
+= EXAMPLE
+
+ #include <dt-bindings/mfd/qcom,rpm.h>
+
+ rpm at 108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_smps1: pm8921-smps1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_SMPS1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/mfd/qcom,rpm.h b/include/dt-bindings/mfd/qcom,rpm.h
new file mode 100644
index 0000000..388a6f3
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom,rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_LDO1 55
+#define QCOM_RPM_PM8821_SMPS1 56
+#define QCOM_RPM_PM8821_SMPS2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_LDO1 77
+#define QCOM_RPM_PM8921_LDO2 78
+#define QCOM_RPM_PM8921_LDO3 79
+#define QCOM_RPM_PM8921_LDO4 80
+#define QCOM_RPM_PM8921_LDO5 81
+#define QCOM_RPM_PM8921_LDO6 82
+#define QCOM_RPM_PM8921_LDO7 83
+#define QCOM_RPM_PM8921_LDO8 84
+#define QCOM_RPM_PM8921_LDO9 85
+#define QCOM_RPM_PM8921_LDO10 86
+#define QCOM_RPM_PM8921_LDO11 87
+#define QCOM_RPM_PM8921_LDO12 88
+#define QCOM_RPM_PM8921_LDO13 89
+#define QCOM_RPM_PM8921_LDO14 90
+#define QCOM_RPM_PM8921_LDO15 91
+#define QCOM_RPM_PM8921_LDO16 92
+#define QCOM_RPM_PM8921_LDO17 93
+#define QCOM_RPM_PM8921_LDO18 94
+#define QCOM_RPM_PM8921_LDO19 95
+#define QCOM_RPM_PM8921_LDO20 96
+#define QCOM_RPM_PM8921_LDO21 97
+#define QCOM_RPM_PM8921_LDO22 98
+#define QCOM_RPM_PM8921_LDO23 99
+#define QCOM_RPM_PM8921_LDO24 100
+#define QCOM_RPM_PM8921_LDO25 101
+#define QCOM_RPM_PM8921_LDO26 102
+#define QCOM_RPM_PM8921_LDO27 103
+#define QCOM_RPM_PM8921_LDO28 104
+#define QCOM_RPM_PM8921_LDO29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_SMPS1 115
+#define QCOM_RPM_PM8921_SMPS2 116
+#define QCOM_RPM_PM8921_SMPS3 117
+#define QCOM_RPM_PM8921_SMPS4 118
+#define QCOM_RPM_PM8921_SMPS5 119
+#define QCOM_RPM_PM8921_SMPS6 120
+#define QCOM_RPM_PM8921_SMPS7 121
+#define QCOM_RPM_PM8921_SMPS8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE 0
+#define QCOM_RPM_FORCE_MODE_LPM 1
+#define QCOM_RPM_FORCE_MODE_HPM 2
+#define QCOM_RPM_FORCE_MODE_AUTO 3
+#define QCOM_RPM_FORCE_MODE_BYPASS 4
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
2014-08-26 4:58 ` Bjorn Andersson
(?)
@ 2014-08-26 4:58 ` Bjorn Andersson
-1 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/qcom_rpm.h | 10 +
4 files changed, 605 insertions(+)
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 include/linux/mfd/qcom_rpm.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..6743e88 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -539,6 +539,20 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..3f2fc89 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
new file mode 100644
index 0000000..f006433
--- /dev/null
+++ b/drivers/mfd/qcom_rpm.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = 2,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm)
+ return -ENOMEM;
+
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
new file mode 100644
index 0000000..a60798d
--- /dev/null
+++ b/include/linux/mfd/qcom_rpm.h
@@ -0,0 +1,10 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/qcom_rpm.h | 10 +
4 files changed, 605 insertions(+)
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 include/linux/mfd/qcom_rpm.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..6743e88 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -539,6 +539,20 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..3f2fc89 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
new file mode 100644
index 0000000..f006433
--- /dev/null
+++ b/drivers/mfd/qcom_rpm.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = 2,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm)
+ return -ENOMEM;
+
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
new file mode 100644
index 0000000..a60798d
--- /dev/null
+++ b/include/linux/mfd/qcom_rpm.h
@@ -0,0 +1,10 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: linux-arm-kernel
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/qcom_rpm.h | 10 +
4 files changed, 605 insertions(+)
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 include/linux/mfd/qcom_rpm.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..6743e88 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -539,6 +539,20 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..3f2fc89 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
new file mode 100644
index 0000000..f006433
--- /dev/null
+++ b/drivers/mfd/qcom_rpm.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = 2,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm)
+ return -ENOMEM;
+
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
new file mode 100644
index 0000000..a60798d
--- /dev/null
+++ b/include/linux/mfd/qcom_rpm.h
@@ -0,0 +1,10 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-08-26 4:58 ` Bjorn Andersson
(?)
@ 2014-08-26 4:58 ` Bjorn Andersson
-1 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Mark Brown
Cc: Rob Herring, Lee Jones, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++++++++++++++
3 files changed, 811 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2dc8289..0e59754 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -449,6 +449,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on MFD_QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index aa4a6aa..9c50dc6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..fb9c9a7
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/qcom_rpm.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+
+ bool supports_force_mode_auto;
+ bool supports_force_mode_bypass;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 force_mode;
+ bool pwm;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ key = "qcom,power-mode-hysteretic";
+ pwm = !of_property_read_bool(pdev->dev.of_node, key);
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (vreg->parts->fm.mask) {
+ force_mode = -1;
+
+ key = "qcom,force-mode";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret == -EINVAL) {
+ val = QCOM_RPM_FORCE_MODE_NONE;
+ } else if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+
+ /*
+ * If force-mode is encoded as 2 bits then the
+ * possible register values are:
+ * NONE, LPM, HPM
+ * otherwise:
+ * NONE, LPM, AUTO, HPM, BYPASS
+ */
+ switch (val) {
+ case QCOM_RPM_FORCE_MODE_NONE:
+ force_mode = 0;
+ break;
+ case QCOM_RPM_FORCE_MODE_LPM:
+ force_mode = 1;
+ break;
+ case QCOM_RPM_FORCE_MODE_HPM:
+ if (FORCE_MODE_IS_2_BITS(vreg))
+ force_mode = 2;
+ else
+ force_mode = 3;
+ break;
+ case QCOM_RPM_FORCE_MODE_AUTO:
+ if (vreg->supports_force_mode_auto)
+ force_mode = 2;
+ break;
+ case QCOM_RPM_FORCE_MODE_BYPASS:
+ if (vreg->supports_force_mode_bypass)
+ force_mode = 4;
+ break;
+ }
+
+ if (force_mode < 0) {
+ dev_err(&pdev->dev, "invalid force mode\n");
+ return -EINVAL;
+ }
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: Mark Brown
Cc: Rob Herring, Lee Jones, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++++++++++++++
3 files changed, 811 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2dc8289..0e59754 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -449,6 +449,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on MFD_QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index aa4a6aa..9c50dc6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..fb9c9a7
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/qcom_rpm.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+
+ bool supports_force_mode_auto;
+ bool supports_force_mode_bypass;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 force_mode;
+ bool pwm;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ key = "qcom,power-mode-hysteretic";
+ pwm = !of_property_read_bool(pdev->dev.of_node, key);
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (vreg->parts->fm.mask) {
+ force_mode = -1;
+
+ key = "qcom,force-mode";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret == -EINVAL) {
+ val = QCOM_RPM_FORCE_MODE_NONE;
+ } else if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+
+ /*
+ * If force-mode is encoded as 2 bits then the
+ * possible register values are:
+ * NONE, LPM, HPM
+ * otherwise:
+ * NONE, LPM, AUTO, HPM, BYPASS
+ */
+ switch (val) {
+ case QCOM_RPM_FORCE_MODE_NONE:
+ force_mode = 0;
+ break;
+ case QCOM_RPM_FORCE_MODE_LPM:
+ force_mode = 1;
+ break;
+ case QCOM_RPM_FORCE_MODE_HPM:
+ if (FORCE_MODE_IS_2_BITS(vreg))
+ force_mode = 2;
+ else
+ force_mode = 3;
+ break;
+ case QCOM_RPM_FORCE_MODE_AUTO:
+ if (vreg->supports_force_mode_auto)
+ force_mode = 2;
+ break;
+ case QCOM_RPM_FORCE_MODE_BYPASS:
+ if (vreg->supports_force_mode_bypass)
+ force_mode = 4;
+ break;
+ }
+
+ if (force_mode < 0) {
+ dev_err(&pdev->dev, "invalid force mode\n");
+ return -EINVAL;
+ }
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-08-26 4:58 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-08-26 4:58 UTC (permalink / raw)
To: linux-arm-kernel
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++++++++++++++
3 files changed, 811 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2dc8289..0e59754 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -449,6 +449,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on MFD_QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index aa4a6aa..9c50dc6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..fb9c9a7
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/qcom_rpm.h>
+
+#include <dt-bindings/mfd/qcom,rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+
+ bool supports_force_mode_auto;
+ bool supports_force_mode_bypass;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = true,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = true,
+ .supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 force_mode;
+ bool pwm;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ key = "qcom,power-mode-hysteretic";
+ pwm = !of_property_read_bool(pdev->dev.of_node, key);
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (vreg->parts->fm.mask) {
+ force_mode = -1;
+
+ key = "qcom,force-mode";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret == -EINVAL) {
+ val = QCOM_RPM_FORCE_MODE_NONE;
+ } else if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+
+ /*
+ * If force-mode is encoded as 2 bits then the
+ * possible register values are:
+ * NONE, LPM, HPM
+ * otherwise:
+ * NONE, LPM, AUTO, HPM, BYPASS
+ */
+ switch (val) {
+ case QCOM_RPM_FORCE_MODE_NONE:
+ force_mode = 0;
+ break;
+ case QCOM_RPM_FORCE_MODE_LPM:
+ force_mode = 1;
+ break;
+ case QCOM_RPM_FORCE_MODE_HPM:
+ if (FORCE_MODE_IS_2_BITS(vreg))
+ force_mode = 2;
+ else
+ force_mode = 3;
+ break;
+ case QCOM_RPM_FORCE_MODE_AUTO:
+ if (vreg->supports_force_mode_auto)
+ force_mode = 2;
+ break;
+ case QCOM_RPM_FORCE_MODE_BYPASS:
+ if (vreg->supports_force_mode_bypass)
+ force_mode = 4;
+ break;
+ }
+
+ if (force_mode < 0) {
+ dev_err(&pdev->dev, "invalid force mode\n");
+ return -EINVAL;
+ }
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
2014-08-26 4:58 ` Bjorn Andersson
(?)
@ 2014-08-26 7:27 ` Lee Jones
-1 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-08-26 7:27 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA
On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> 2 files changed, 400 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
Please use the same filename formatting as the existing files.
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-08-26 7:27 ` Lee Jones
0 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-08-26 7:27 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> 2 files changed, 400 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
Please use the same filename formatting as the existing files.
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-08-26 7:27 ` Lee Jones
0 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-08-26 7:27 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> 2 files changed, 400 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
Please use the same filename formatting as the existing files.
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
2014-08-26 4:58 ` Bjorn Andersson
@ 2014-09-04 9:39 ` Lee Jones
-1 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-09-04 9:39 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> drivers/mfd/Kconfig | 14 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/qcom_rpm.h | 10 +
> 4 files changed, 605 insertions(+)
> create mode 100644 drivers/mfd/qcom_rpm.c
> create mode 100644 include/linux/mfd/qcom_rpm.h
I'd like to take this in with the other MFD patch.
Is the regulator one okay to go in on it's own?
Acked-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-09-04 9:39 ` Lee Jones
0 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-09-04 9:39 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> drivers/mfd/Kconfig | 14 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/qcom_rpm.c | 580 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/qcom_rpm.h | 10 +
> 4 files changed, 605 insertions(+)
> create mode 100644 drivers/mfd/qcom_rpm.c
> create mode 100644 include/linux/mfd/qcom_rpm.h
I'd like to take this in with the other MFD patch.
Is the regulator one okay to go in on it's own?
Acked-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
2014-08-26 7:27 ` Lee Jones
@ 2014-09-17 16:15 ` Lee Jones
-1 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-09-17 16:15 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Mark Brown, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
On Tue, 26 Aug 2014, Lee Jones wrote:
> On Mon, 25 Aug 2014, Bjorn Andersson wrote:
>
> > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > 8960 and 8064 based devices. The binding currently describes the rpm
> > itself and the regulator subnodes.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > ---
> > Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> > include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> > 2 files changed, 400 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
>
> Please use the same filename formatting as the existing files.
Are you going to resubmit this (and answer my question on the
regulator patch)?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-09-17 16:15 ` Lee Jones
0 siblings, 0 replies; 25+ messages in thread
From: Lee Jones @ 2014-09-17 16:15 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 26 Aug 2014, Lee Jones wrote:
> On Mon, 25 Aug 2014, Bjorn Andersson wrote:
>
> > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > 8960 and 8064 based devices. The binding currently describes the rpm
> > itself and the regulator subnodes.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > ---
> > Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> > include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> > 2 files changed, 400 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
>
> Please use the same filename formatting as the existing files.
Are you going to resubmit this (and answer my question on the
regulator patch)?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
2014-09-17 16:15 ` Lee Jones
(?)
@ 2014-09-17 18:19 ` Bjorn Andersson
-1 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-09-17 18:19 UTC (permalink / raw)
To: Lee Jones, Mark Brown
Cc: Rob Herring, Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman,
Kumar Gala, Josh Cartwright, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Wed 17 Sep 09:15 PDT 2014, Lee Jones wrote:
> On Tue, 26 Aug 2014, Lee Jones wrote:
>
> > On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> >
> > > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > > 8960 and 8064 based devices. The binding currently describes the rpm
> > > itself and the regulator subnodes.
> > >
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > > ---
> > > Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> > > include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> > > 2 files changed, 400 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > > create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
> >
> > Please use the same filename formatting as the existing files.
>
> Are you going to resubmit this (and answer my question on the
> regulator patch)?
>
I'll resubmit all three parts after changing the filename of the dt header.
The regulator driver have a strong dependency on the mfd driver, but Kconfig
will make sure it's not selectable until the two parts merges again, so it
should be fine. But I guess it's up to Mark?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-09-17 18:19 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-09-17 18:19 UTC (permalink / raw)
To: Lee Jones, Mark Brown
Cc: Rob Herring, Pawel Moll, Andy Gross, Mark Rutland, Kevin Hilman,
Kumar Gala, Josh Cartwright, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Wed 17 Sep 09:15 PDT 2014, Lee Jones wrote:
> On Tue, 26 Aug 2014, Lee Jones wrote:
>
> > On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> >
> > > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > > 8960 and 8064 based devices. The binding currently describes the rpm
> > > itself and the regulator subnodes.
> > >
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > > ---
> > > Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> > > include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> > > 2 files changed, 400 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > > create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
> >
> > Please use the same filename formatting as the existing files.
>
> Are you going to resubmit this (and answer my question on the
> regulator patch)?
>
I'll resubmit all three parts after changing the filename of the dt header.
The regulator driver have a strong dependency on the mfd driver, but Kconfig
will make sure it's not selectable until the two parts merges again, so it
should be fine. But I guess it's up to Mark?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-09-17 18:19 ` Bjorn Andersson
0 siblings, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2014-09-17 18:19 UTC (permalink / raw)
To: linux-arm-kernel
On Wed 17 Sep 09:15 PDT 2014, Lee Jones wrote:
> On Tue, 26 Aug 2014, Lee Jones wrote:
>
> > On Mon, 25 Aug 2014, Bjorn Andersson wrote:
> >
> > > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > > 8960 and 8064 based devices. The binding currently describes the rpm
> > > itself and the regulator subnodes.
> > >
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > > ---
> > > Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++++++++++++++++
> > > include/dt-bindings/mfd/qcom,rpm.h | 154 ++++++++++++
> > > 2 files changed, 400 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
> > > create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
> >
> > Please use the same filename formatting as the existing files.
>
> Are you going to resubmit this (and answer my question on the
> regulator patch)?
>
I'll resubmit all three parts after changing the filename of the dt header.
The regulator driver have a strong dependency on the mfd driver, but Kconfig
will make sure it's not selectable until the two parts merges again, so it
should be fine. But I guess it's up to Mark?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
2014-09-17 18:19 ` Bjorn Andersson
(?)
@ 2014-09-17 18:36 ` Mark Brown
-1 siblings, 0 replies; 25+ messages in thread
From: Mark Brown @ 2014-09-17 18:36 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Lee Jones, Rob Herring, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 405 bytes --]
On Wed, Sep 17, 2014 at 11:19:40AM -0700, Bjorn Andersson wrote:
> The regulator driver have a strong dependency on the mfd driver, but Kconfig
> will make sure it's not selectable until the two parts merges again, so it
> should be fine. But I guess it's up to Mark?
Yes, that's the normal approach. I'd have applied it but a lot of the
early discussion seemed to be about the register I/O interface.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-09-17 18:36 ` Mark Brown
0 siblings, 0 replies; 25+ messages in thread
From: Mark Brown @ 2014-09-17 18:36 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Lee Jones, Rob Herring, Pawel Moll, Andy Gross, Mark Rutland,
Kevin Hilman, Kumar Gala, Josh Cartwright, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 405 bytes --]
On Wed, Sep 17, 2014 at 11:19:40AM -0700, Bjorn Andersson wrote:
> The regulator driver have a strong dependency on the mfd driver, but Kconfig
> will make sure it's not selectable until the two parts merges again, so it
> should be fine. But I guess it's up to Mark?
Yes, that's the normal approach. I'd have applied it but a lot of the
early discussion seemed to be about the register I/O interface.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-09-17 18:36 ` Mark Brown
0 siblings, 0 replies; 25+ messages in thread
From: Mark Brown @ 2014-09-17 18:36 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 17, 2014 at 11:19:40AM -0700, Bjorn Andersson wrote:
> The regulator driver have a strong dependency on the mfd driver, but Kconfig
> will make sure it's not selectable until the two parts merges again, so it
> should be fine. But I guess it's up to Mark?
Yes, that's the normal approach. I'd have applied it but a lot of the
early discussion seemed to be about the register I/O interface.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140917/05508a4a/attachment.sig>
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2014-09-17 18:36 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-08-26 4:58 [PATCH v6 0/3] Qualcomm Resource Power Manager driver Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-08-26 4:58 ` [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
[not found] ` <1409029109-28769-2-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-08-26 7:27 ` Lee Jones
2014-08-26 7:27 ` Lee Jones
2014-08-26 7:27 ` Lee Jones
2014-09-17 16:15 ` Lee Jones
2014-09-17 16:15 ` Lee Jones
2014-09-17 18:19 ` Bjorn Andersson
2014-09-17 18:19 ` Bjorn Andersson
2014-09-17 18:19 ` Bjorn Andersson
2014-09-17 18:36 ` Mark Brown
2014-09-17 18:36 ` Mark Brown
2014-09-17 18:36 ` Mark Brown
2014-08-26 4:58 ` [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-09-04 9:39 ` Lee Jones
2014-09-04 9:39 ` Lee Jones
2014-08-26 4:58 ` [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver " Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
2014-08-26 4:58 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.