* [PATCH v2 0/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-26 12:45 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linus.walleij, galak, bjorn.andersson, agross
Cc: robh+dt, mark.rutland, grant.likely, sboyd, iivanov, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm, Georgi Djakov
This set of patches adds pinctrl support for the Qualcomm APQ8084 platform.
The first patch adds the pin definitions. The second patch contains the
devicetree binding documentation. The last patch adds the DT node.
Tested on IFC6540 board.
Changes since v1:
- Updated the total number of pins (suggested by Bjorn Andersson)
- Added the missing pin info (provided by Andy Gross)
- Updated groups and functions to be consistent with other pinctrls.
(suggested by Andy Gross)
- Removed unused functions, qdss and test pins. (suggested by Andy Gross)
- Updated the documentation with the possible functions.
Georgi Djakov (3):
pinctrl: qcom: Add APQ8084 pinctrl support
dt: Document Qualcomm APQ8084 pinctrl binding
ARM: dts: qcom: Add TLMM DT node for APQ8084
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 104 ++
arch/arm/boot/dts/qcom-apq8084.dtsi | 10 +
drivers/pinctrl/qcom/Kconfig | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-apq8084.c | 1243 ++++++++++++++++++++
5 files changed, 1366 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
create mode 100644 drivers/pinctrl/qcom/pinctrl-apq8084.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 0/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-26 12:45 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linux-arm-kernel
This set of patches adds pinctrl support for the Qualcomm APQ8084 platform.
The first patch adds the pin definitions. The second patch contains the
devicetree binding documentation. The last patch adds the DT node.
Tested on IFC6540 board.
Changes since v1:
- Updated the total number of pins (suggested by Bjorn Andersson)
- Added the missing pin info (provided by Andy Gross)
- Updated groups and functions to be consistent with other pinctrls.
(suggested by Andy Gross)
- Removed unused functions, qdss and test pins. (suggested by Andy Gross)
- Updated the documentation with the possible functions.
Georgi Djakov (3):
pinctrl: qcom: Add APQ8084 pinctrl support
dt: Document Qualcomm APQ8084 pinctrl binding
ARM: dts: qcom: Add TLMM DT node for APQ8084
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 104 ++
arch/arm/boot/dts/qcom-apq8084.dtsi | 10 +
drivers/pinctrl/qcom/Kconfig | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-apq8084.c | 1243 ++++++++++++++++++++
5 files changed, 1366 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
create mode 100644 drivers/pinctrl/qcom/pinctrl-apq8084.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
2014-08-26 12:45 ` Georgi Djakov
@ 2014-08-26 12:45 ` Georgi Djakov
-1 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linus.walleij, galak, bjorn.andersson, agross
Cc: robh+dt, mark.rutland, grant.likely, sboyd, iivanov, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm, Georgi Djakov
This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
drivers/pinctrl/qcom/Kconfig | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-apq8084.c | 1243 ++++++++++++++++++++++++++++++++
3 files changed, 1252 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-apq8084.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index d160a71..81275af 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -15,6 +15,14 @@ config PINCTRL_APQ8064
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm APQ8064 platform.
+config PINCTRL_APQ8084
+ tristate "Qualcomm APQ8084 pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm TLMM block found in the Qualcomm APQ8084 platform.
+
config PINCTRL_IPQ8064
tristate "Qualcomm IPQ8064 pin controller driver"
depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 2a02602..ba8519f 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -1,6 +1,7 @@
# Qualcomm pin control drivers
obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
+obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
new file mode 100644
index 0000000..f6f29a2
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c
@@ -0,0 +1,1243 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const struct pinctrl_pin_desc apq8084_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+ PINCTRL_PIN(146, "GPIO_146"),
+
+ PINCTRL_PIN(147, "SDC1_CLK"),
+ PINCTRL_PIN(148, "SDC1_CMD"),
+ PINCTRL_PIN(149, "SDC1_DATA"),
+ PINCTRL_PIN(150, "SDC2_CLK"),
+ PINCTRL_PIN(151, "SDC2_CMD"),
+ PINCTRL_PIN(152, "SDC2_DATA"),
+};
+
+#define DECLARE_APQ_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
+
+DECLARE_APQ_GPIO_PINS(0);
+DECLARE_APQ_GPIO_PINS(1);
+DECLARE_APQ_GPIO_PINS(2);
+DECLARE_APQ_GPIO_PINS(3);
+DECLARE_APQ_GPIO_PINS(4);
+DECLARE_APQ_GPIO_PINS(5);
+DECLARE_APQ_GPIO_PINS(6);
+DECLARE_APQ_GPIO_PINS(7);
+DECLARE_APQ_GPIO_PINS(8);
+DECLARE_APQ_GPIO_PINS(9);
+DECLARE_APQ_GPIO_PINS(10);
+DECLARE_APQ_GPIO_PINS(11);
+DECLARE_APQ_GPIO_PINS(12);
+DECLARE_APQ_GPIO_PINS(13);
+DECLARE_APQ_GPIO_PINS(14);
+DECLARE_APQ_GPIO_PINS(15);
+DECLARE_APQ_GPIO_PINS(16);
+DECLARE_APQ_GPIO_PINS(17);
+DECLARE_APQ_GPIO_PINS(18);
+DECLARE_APQ_GPIO_PINS(19);
+DECLARE_APQ_GPIO_PINS(20);
+DECLARE_APQ_GPIO_PINS(21);
+DECLARE_APQ_GPIO_PINS(22);
+DECLARE_APQ_GPIO_PINS(23);
+DECLARE_APQ_GPIO_PINS(24);
+DECLARE_APQ_GPIO_PINS(25);
+DECLARE_APQ_GPIO_PINS(26);
+DECLARE_APQ_GPIO_PINS(27);
+DECLARE_APQ_GPIO_PINS(28);
+DECLARE_APQ_GPIO_PINS(29);
+DECLARE_APQ_GPIO_PINS(30);
+DECLARE_APQ_GPIO_PINS(31);
+DECLARE_APQ_GPIO_PINS(32);
+DECLARE_APQ_GPIO_PINS(33);
+DECLARE_APQ_GPIO_PINS(34);
+DECLARE_APQ_GPIO_PINS(35);
+DECLARE_APQ_GPIO_PINS(36);
+DECLARE_APQ_GPIO_PINS(37);
+DECLARE_APQ_GPIO_PINS(38);
+DECLARE_APQ_GPIO_PINS(39);
+DECLARE_APQ_GPIO_PINS(40);
+DECLARE_APQ_GPIO_PINS(41);
+DECLARE_APQ_GPIO_PINS(42);
+DECLARE_APQ_GPIO_PINS(43);
+DECLARE_APQ_GPIO_PINS(44);
+DECLARE_APQ_GPIO_PINS(45);
+DECLARE_APQ_GPIO_PINS(46);
+DECLARE_APQ_GPIO_PINS(47);
+DECLARE_APQ_GPIO_PINS(48);
+DECLARE_APQ_GPIO_PINS(49);
+DECLARE_APQ_GPIO_PINS(50);
+DECLARE_APQ_GPIO_PINS(51);
+DECLARE_APQ_GPIO_PINS(52);
+DECLARE_APQ_GPIO_PINS(53);
+DECLARE_APQ_GPIO_PINS(54);
+DECLARE_APQ_GPIO_PINS(55);
+DECLARE_APQ_GPIO_PINS(56);
+DECLARE_APQ_GPIO_PINS(57);
+DECLARE_APQ_GPIO_PINS(58);
+DECLARE_APQ_GPIO_PINS(59);
+DECLARE_APQ_GPIO_PINS(60);
+DECLARE_APQ_GPIO_PINS(61);
+DECLARE_APQ_GPIO_PINS(62);
+DECLARE_APQ_GPIO_PINS(63);
+DECLARE_APQ_GPIO_PINS(64);
+DECLARE_APQ_GPIO_PINS(65);
+DECLARE_APQ_GPIO_PINS(66);
+DECLARE_APQ_GPIO_PINS(67);
+DECLARE_APQ_GPIO_PINS(68);
+DECLARE_APQ_GPIO_PINS(69);
+DECLARE_APQ_GPIO_PINS(70);
+DECLARE_APQ_GPIO_PINS(71);
+DECLARE_APQ_GPIO_PINS(72);
+DECLARE_APQ_GPIO_PINS(73);
+DECLARE_APQ_GPIO_PINS(74);
+DECLARE_APQ_GPIO_PINS(75);
+DECLARE_APQ_GPIO_PINS(76);
+DECLARE_APQ_GPIO_PINS(77);
+DECLARE_APQ_GPIO_PINS(78);
+DECLARE_APQ_GPIO_PINS(79);
+DECLARE_APQ_GPIO_PINS(80);
+DECLARE_APQ_GPIO_PINS(81);
+DECLARE_APQ_GPIO_PINS(82);
+DECLARE_APQ_GPIO_PINS(83);
+DECLARE_APQ_GPIO_PINS(84);
+DECLARE_APQ_GPIO_PINS(85);
+DECLARE_APQ_GPIO_PINS(86);
+DECLARE_APQ_GPIO_PINS(87);
+DECLARE_APQ_GPIO_PINS(88);
+DECLARE_APQ_GPIO_PINS(89);
+DECLARE_APQ_GPIO_PINS(90);
+DECLARE_APQ_GPIO_PINS(91);
+DECLARE_APQ_GPIO_PINS(92);
+DECLARE_APQ_GPIO_PINS(93);
+DECLARE_APQ_GPIO_PINS(94);
+DECLARE_APQ_GPIO_PINS(95);
+DECLARE_APQ_GPIO_PINS(96);
+DECLARE_APQ_GPIO_PINS(97);
+DECLARE_APQ_GPIO_PINS(98);
+DECLARE_APQ_GPIO_PINS(99);
+DECLARE_APQ_GPIO_PINS(100);
+DECLARE_APQ_GPIO_PINS(101);
+DECLARE_APQ_GPIO_PINS(102);
+DECLARE_APQ_GPIO_PINS(103);
+DECLARE_APQ_GPIO_PINS(104);
+DECLARE_APQ_GPIO_PINS(105);
+DECLARE_APQ_GPIO_PINS(106);
+DECLARE_APQ_GPIO_PINS(107);
+DECLARE_APQ_GPIO_PINS(108);
+DECLARE_APQ_GPIO_PINS(109);
+DECLARE_APQ_GPIO_PINS(110);
+DECLARE_APQ_GPIO_PINS(111);
+DECLARE_APQ_GPIO_PINS(112);
+DECLARE_APQ_GPIO_PINS(113);
+DECLARE_APQ_GPIO_PINS(114);
+DECLARE_APQ_GPIO_PINS(115);
+DECLARE_APQ_GPIO_PINS(116);
+DECLARE_APQ_GPIO_PINS(117);
+DECLARE_APQ_GPIO_PINS(118);
+DECLARE_APQ_GPIO_PINS(119);
+DECLARE_APQ_GPIO_PINS(120);
+DECLARE_APQ_GPIO_PINS(121);
+DECLARE_APQ_GPIO_PINS(122);
+DECLARE_APQ_GPIO_PINS(123);
+DECLARE_APQ_GPIO_PINS(124);
+DECLARE_APQ_GPIO_PINS(125);
+DECLARE_APQ_GPIO_PINS(126);
+DECLARE_APQ_GPIO_PINS(127);
+DECLARE_APQ_GPIO_PINS(128);
+DECLARE_APQ_GPIO_PINS(129);
+DECLARE_APQ_GPIO_PINS(130);
+DECLARE_APQ_GPIO_PINS(131);
+DECLARE_APQ_GPIO_PINS(132);
+DECLARE_APQ_GPIO_PINS(133);
+DECLARE_APQ_GPIO_PINS(134);
+DECLARE_APQ_GPIO_PINS(135);
+DECLARE_APQ_GPIO_PINS(136);
+DECLARE_APQ_GPIO_PINS(137);
+DECLARE_APQ_GPIO_PINS(138);
+DECLARE_APQ_GPIO_PINS(139);
+DECLARE_APQ_GPIO_PINS(140);
+DECLARE_APQ_GPIO_PINS(141);
+DECLARE_APQ_GPIO_PINS(142);
+DECLARE_APQ_GPIO_PINS(143);
+DECLARE_APQ_GPIO_PINS(144);
+DECLARE_APQ_GPIO_PINS(145);
+DECLARE_APQ_GPIO_PINS(146);
+
+static const unsigned int sdc1_clk_pins[] = { 147 };
+static const unsigned int sdc1_cmd_pins[] = { 148 };
+static const unsigned int sdc1_data_pins[] = { 149 };
+static const unsigned int sdc2_clk_pins[] = { 150 };
+static const unsigned int sdc2_cmd_pins[] = { 151 };
+static const unsigned int sdc2_data_pins[] = { 152 };
+
+#define FUNCTION(fname) \
+ [APQ_MUX_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ APQ_MUX_gpio, \
+ APQ_MUX_##f1, \
+ APQ_MUX_##f2, \
+ APQ_MUX_##f3, \
+ APQ_MUX_##f4, \
+ APQ_MUX_##f5, \
+ APQ_MUX_##f6, \
+ APQ_MUX_##f7 \
+ }, \
+ .nfuncs = 8, \
+ .ctl_reg = 0x1000 + 0x10 * id, \
+ .io_reg = 0x1004 + 0x10 * id, \
+ .intr_cfg_reg = 0x1008 + 0x10 * id, \
+ .intr_status_reg = 0x100c + 0x10 * id, \
+ .intr_target_reg = 0x400 + 0x4 * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_ack_high = 1, \
+ .intr_target_bit = 0, \
+ .intr_raw_status_bit = 3, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 1, \
+ }
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+enum apq8084_functions {
+ APQ_MUX_adsp_ext,
+ APQ_MUX_audio_ref,
+ APQ_MUX_blsp_i2c1,
+ APQ_MUX_blsp_i2c2,
+ APQ_MUX_blsp_i2c3,
+ APQ_MUX_blsp_i2c4,
+ APQ_MUX_blsp_i2c5,
+ APQ_MUX_blsp_i2c6,
+ APQ_MUX_blsp_i2c7,
+ APQ_MUX_blsp_i2c8,
+ APQ_MUX_blsp_i2c9,
+ APQ_MUX_blsp_i2c10,
+ APQ_MUX_blsp_i2c11,
+ APQ_MUX_blsp_i2c12,
+ APQ_MUX_blsp_spi1,
+ APQ_MUX_blsp_spi1_cs1,
+ APQ_MUX_blsp_spi1_cs2,
+ APQ_MUX_blsp_spi1_cs3,
+ APQ_MUX_blsp_spi2,
+ APQ_MUX_blsp_spi3,
+ APQ_MUX_blsp_spi3_cs1,
+ APQ_MUX_blsp_spi3_cs2,
+ APQ_MUX_blsp_spi3_cs3,
+ APQ_MUX_blsp_spi4,
+ APQ_MUX_blsp_spi5,
+ APQ_MUX_blsp_spi6,
+ APQ_MUX_blsp_spi7,
+ APQ_MUX_blsp_spi8,
+ APQ_MUX_blsp_spi9,
+ APQ_MUX_blsp_spi10,
+ APQ_MUX_blsp_spi10_cs1,
+ APQ_MUX_blsp_spi10_cs2,
+ APQ_MUX_blsp_spi10_cs3,
+ APQ_MUX_blsp_spi11,
+ APQ_MUX_blsp_spi12,
+ APQ_MUX_blsp_uart1,
+ APQ_MUX_blsp_uart2,
+ APQ_MUX_blsp_uart3,
+ APQ_MUX_blsp_uart4,
+ APQ_MUX_blsp_uart5,
+ APQ_MUX_blsp_uart6,
+ APQ_MUX_blsp_uart7,
+ APQ_MUX_blsp_uart8,
+ APQ_MUX_blsp_uart9,
+ APQ_MUX_blsp_uart10,
+ APQ_MUX_blsp_uart11,
+ APQ_MUX_blsp_uart12,
+ APQ_MUX_blsp_uim1,
+ APQ_MUX_blsp_uim2,
+ APQ_MUX_blsp_uim3,
+ APQ_MUX_blsp_uim4,
+ APQ_MUX_blsp_uim5,
+ APQ_MUX_blsp_uim6,
+ APQ_MUX_blsp_uim7,
+ APQ_MUX_blsp_uim8,
+ APQ_MUX_blsp_uim9,
+ APQ_MUX_blsp_uim10,
+ APQ_MUX_blsp_uim11,
+ APQ_MUX_blsp_uim12,
+ APQ_MUX_cam_mclk0,
+ APQ_MUX_cam_mclk1,
+ APQ_MUX_cam_mclk2,
+ APQ_MUX_cam_mclk3,
+ APQ_MUX_cci_async,
+ APQ_MUX_cci_async_in0,
+ APQ_MUX_cci_i2c0,
+ APQ_MUX_cci_i2c1,
+ APQ_MUX_cci_timer0,
+ APQ_MUX_cci_timer1,
+ APQ_MUX_cci_timer2,
+ APQ_MUX_cci_timer3,
+ APQ_MUX_cci_timer4,
+ APQ_MUX_edp_hpd,
+ APQ_MUX_gcc_gp1,
+ APQ_MUX_gcc_gp2,
+ APQ_MUX_gcc_gp3,
+ APQ_MUX_gcc_obt,
+ APQ_MUX_gcc_vtt,
+ APQ_MUX_gp_mn,
+ APQ_MUX_gp_pdm0,
+ APQ_MUX_gp_pdm1,
+ APQ_MUX_gp_pdm2,
+ APQ_MUX_gp0_clk,
+ APQ_MUX_gp1_clk,
+ APQ_MUX_gpio,
+ APQ_MUX_hdmi_cec,
+ APQ_MUX_hdmi_ddc,
+ APQ_MUX_hdmi_dtest,
+ APQ_MUX_hdmi_hpd,
+ APQ_MUX_hdmi_rcv,
+ APQ_MUX_hsic,
+ APQ_MUX_ldo_en,
+ APQ_MUX_ldo_update,
+ APQ_MUX_mdp_vsync,
+ APQ_MUX_pci_e0,
+ APQ_MUX_pci_e0_n,
+ APQ_MUX_pci_e0_rst,
+ APQ_MUX_pci_e1,
+ APQ_MUX_pci_e1_rst,
+ APQ_MUX_pci_e1_rst_n,
+ APQ_MUX_pci_e1_clkreq_n,
+ APQ_MUX_pri_mi2s,
+ APQ_MUX_qua_mi2s,
+ APQ_MUX_sata_act,
+ APQ_MUX_sata_devsleep,
+ APQ_MUX_sata_devsleep_n,
+ APQ_MUX_sd_write,
+ APQ_MUX_sdc_emmc_mode,
+ APQ_MUX_sdc3,
+ APQ_MUX_sdc4,
+ APQ_MUX_sec_mi2s,
+ APQ_MUX_slimbus,
+ APQ_MUX_spdif_tx,
+ APQ_MUX_spkr_i2s,
+ APQ_MUX_spkr_i2s_ws,
+ APQ_MUX_spss_geni,
+ APQ_MUX_ter_mi2s,
+ APQ_MUX_tsif1,
+ APQ_MUX_tsif2,
+ APQ_MUX_uim,
+ APQ_MUX_uim_batt_alarm,
+ APQ_MUX_NA,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+ "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+ "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+ "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+ "gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+ "gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+ "gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146"
+};
+
+static const char * const adsp_ext_groups[] = {
+ "gpio34"
+};
+static const char * const audio_ref_groups[] = {
+ "gpio100"
+};
+static const char * const blsp_i2c1_groups[] = {
+ "gpio2", "gpio3"
+};
+static const char * const blsp_i2c2_groups[] = {
+ "gpio6", "gpio7"
+};
+static const char * const blsp_i2c3_groups[] = {
+ "gpio10", "gpio11"
+};
+static const char * const blsp_i2c4_groups[] = {
+ "gpio29", "gpio30"
+};
+static const char * const blsp_i2c5_groups[] = {
+ "gpio41", "gpio42"
+};
+static const char * const blsp_i2c6_groups[] = {
+ "gpio45", "gpio46"
+};
+static const char * const blsp_i2c7_groups[] = {
+ "gpio132", "gpio133"
+};
+static const char * const blsp_i2c8_groups[] = {
+ "gpio53", "gpio54"
+};
+static const char * const blsp_i2c9_groups[] = {
+ "gpio57", "gpio58"
+};
+static const char * const blsp_i2c10_groups[] = {
+ "gpio61", "gpio62"
+};
+static const char * const blsp_i2c11_groups[] = {
+ "gpio65", "gpio66"
+};
+static const char * const blsp_i2c12_groups[] = {
+ "gpio49", "gpio50"
+};
+static const char * const blsp_spi1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_spi2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_spi3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char * const blsp_spi4_groups[] = {
+ "gpio27", "gpio28", "gpio29", "gpio30"
+};
+static const char * const blsp_spi5_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42"
+};
+static const char * const blsp_spi6_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46"
+};
+static const char * const blsp_spi7_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const blsp_spi8_groups[] = {
+ "gpio51", "gpio52", "gpio53", "gpio54"
+};
+static const char * const blsp_spi9_groups[] = {
+ "gpio55", "gpio56", "gpio57", "gpio58"
+};
+static const char * const blsp_spi10_groups[] = {
+ "gpio59", "gpio60", "gpio61", "gpio62"
+};
+static const char * const blsp_spi11_groups[] = {
+ "gpio63", "gpio64", "gpio65", "gpio66"
+};
+static const char * const blsp_spi12_groups[] = {
+ "gpio47", "gpio48", "gpio49", "gpio50"
+};
+static const char * const blsp_uart1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_uart2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_uart3_groups[] = {
+ "gpio8"
+};
+static const char * const blsp_uart4_groups[] = {
+ "gpio27", "gpio28", "gpio29", "gpio30"
+};
+static const char * const blsp_uart5_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42"
+};
+static const char * const blsp_uart6_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46"
+};
+static const char * const blsp_uart7_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const blsp_uart8_groups[] = {
+ "gpio51", "gpio52", "gpio53", "gpio54"
+};
+static const char * const blsp_uart9_groups[] = {
+ "gpio55", "gpio56", "gpio57", "gpio58"
+};
+static const char * const blsp_uart10_groups[] = {
+ "gpio59", "gpio60", "gpio61", "gpio62"
+};
+static const char * const blsp_uart11_groups[] = {
+ "gpio63", "gpio64", "gpio65", "gpio66"
+};
+static const char * const blsp_uart12_groups[] = {
+ "gpio47", "gpio48", "gpio49", "gpio50"
+};
+static const char * const blsp_uim1_groups[] = {
+ "gpio0", "gpio1"
+};
+static const char * const blsp_uim2_groups[] = {
+ "gpio4", "gpio5"
+};
+static const char * const blsp_uim3_groups[] = {
+ "gpio8", "gpio9"
+};
+static const char * const blsp_uim4_groups[] = {
+ "gpio27", "gpio28"
+};
+static const char * const blsp_uim5_groups[] = {
+ "gpio39", "gpio40"
+};
+static const char * const blsp_uim6_groups[] = {
+ "gpio43", "gpio44"
+};
+static const char * const blsp_uim7_groups[] = {
+ "gpio130", "gpio131"
+};
+static const char * const blsp_uim8_groups[] = {
+ "gpio51", "gpio52"
+};
+static const char * const blsp_uim9_groups[] = {
+ "gpio55", "gpio56"
+};
+static const char * const blsp_uim10_groups[] = {
+ "gpio59", "gpio60"
+};
+static const char * const blsp_uim11_groups[] = {
+ "gpio63", "gpio64"
+};
+static const char * const blsp_uim12_groups[] = {
+ "gpio47", "gpio48"
+};
+static const char * const blsp_spi1_cs1_groups[] = {
+ "gpio116"
+};
+static const char * const blsp_spi1_cs2_groups[] = {
+ "gpio117"
+};
+static const char * const blsp_spi1_cs3_groups[] = {
+ "gpio118"
+};
+static const char * const blsp_spi3_cs1_groups[] = {
+ "gpio67"
+};
+static const char * const blsp_spi3_cs2_groups[] = {
+ "gpio71"
+};
+static const char * const blsp_spi3_cs3_groups[] = {
+ "gpio72"
+};
+static const char * const blsp_spi10_cs1_groups[] = {
+ "gpio106"
+};
+static const char * const blsp_spi10_cs2_groups[] = {
+ "gpio111"
+};
+static const char * const blsp_spi10_cs3_groups[] = {
+ "gpio128"
+};
+static const char * const cam_mclk0_groups[] = {
+ "gpio15"
+};
+static const char * const cam_mclk1_groups[] = {
+ "gpio16"
+};
+static const char * const cam_mclk2_groups[] = {
+ "gpio17"
+};
+static const char * const cam_mclk3_groups[] = {
+ "gpio18"
+};
+static const char * const cci_async_groups[] = {
+ "gpio26", "gpio119"
+};
+static const char * const cci_async_in0_groups[] = {
+ "gpio120"
+};
+static const char * const cci_i2c0_groups[] = {
+ "gpio19", "gpio20"
+};
+static const char * const cci_i2c1_groups[] = {
+ "gpio21", "gpio22"
+};
+static const char * const cci_timer0_groups[] = {
+ "gpio23"
+};
+static const char * const cci_timer1_groups[] = {
+ "gpio24"
+};
+static const char * const cci_timer2_groups[] = {
+ "gpio25"
+};
+static const char * const cci_timer3_groups[] = {
+ "gpio26"
+};
+static const char * const cci_timer4_groups[] = {
+ "gpio119"
+};
+static const char * const edp_hpd_groups[] = {
+ "gpio103"
+};
+static const char * const gcc_gp1_groups[] = {
+ "gpio37"
+};
+static const char * const gcc_gp2_groups[] = {
+ "gpio38"
+};
+static const char * const gcc_gp3_groups[] = {
+ "gpio86"
+};
+static const char * const gcc_obt_groups[] = {
+ "gpio127"
+};
+static const char * const gcc_vtt_groups[] = {
+ "gpio126"
+};
+static const char * const gp_mn_groups[] = {
+ "gpio29"
+};
+static const char * const gp_pdm0_groups[] = {
+ "gpio48", "gpio83"
+};
+static const char * const gp_pdm1_groups[] = {
+ "gpio84", "gpio101"
+};
+static const char * const gp_pdm2_groups[] = {
+ "gpio85", "gpio110"
+};
+static const char * const gp0_clk_groups[] = {
+ "gpio25"
+};
+static const char * const gp1_clk_groups[] = {
+ "gpio26"
+};
+static const char * const hdmi_cec_groups[] = {
+ "gpio31"
+};
+static const char * const hdmi_ddc_groups[] = {
+ "gpio32", "gpio33"
+};
+static const char * const hdmi_dtest_groups[] = {
+ "gpio123"
+};
+static const char * const hdmi_hpd_groups[] = {
+ "gpio34"
+};
+static const char * const hdmi_rcv_groups[] = {
+ "gpio125"
+};
+static const char * const hsic_groups[] = {
+ "gpio134", "gpio135"
+};
+static const char * const ldo_en_groups[] = {
+ "gpio124"
+};
+static const char * const ldo_update_groups[] = {
+ "gpio125"
+};
+static const char * const mdp_vsync_groups[] = {
+ "gpio12", "gpio13", "gpio14"
+};
+static const char * const pci_e0_groups[] = {
+ "gpio68", "gpio70"
+};
+static const char * const pci_e0_n_groups[] = {
+ "gpio68", "gpio70"
+};
+static const char * const pci_e0_rst_groups[] = {
+ "gpio70"
+};
+static const char * const pci_e1_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_rst_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_rst_n_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_clkreq_n_groups[] = {
+ "gpio141"
+};
+static const char * const pri_mi2s_groups[] = {
+ "gpio76", "gpio77", "gpio78", "gpio79", "gpio80"
+};
+static const char * const qua_mi2s_groups[] = {
+ "gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97"
+};
+static const char * const sata_act_groups[] = {
+ "gpio129"
+};
+static const char * const sata_devsleep_groups[] = {
+ "gpio119"
+};
+static const char * const sata_devsleep_n_groups[] = {
+ "gpio119"
+};
+static const char * const sd_write_groups[] = {
+ "gpio75"
+};
+static const char * const sdc_emmc_mode_groups[] = {
+ "gpio146"
+};
+static const char * const sdc3_groups[] = {
+ "gpio67", "gpio68", "gpio69", "gpio70", "gpio71", "gpio72"
+};
+static const char * const sdc4_groups[] = {
+ "gpio82", "gpio83", "gpio84", "gpio85", "gpio86",
+ "gpio91", "gpio95", "gpio96", "gpio97", "gpio101"
+};
+static const char * const sec_mi2s_groups[] = {
+ "gpio81", "gpio82", "gpio83", "gpio84", "gpio85"
+};
+static const char * const slimbus_groups[] = {
+ "gpio98", "gpio99"
+};
+static const char * const spdif_tx_groups[] = {
+ "gpio124", "gpio136", "gpio142"
+};
+static const char * const spkr_i2s_groups[] = {
+ "gpio98", "gpio99", "gpio100"
+};
+static const char * const spkr_i2s_ws_groups[] = {
+ "gpio104"
+};
+static const char * const spss_geni_groups[] = {
+ "gpio8", "gpio9"
+};
+static const char * const ter_mi2s_groups[] = {
+ "gpio86", "gpio87", "gpio88", "gpio89", "gpio90"
+};
+static const char * const tsif1_groups[] = {
+ "gpio82", "gpio83", "gpio84", "gpio85", "gpio86"
+};
+static const char * const tsif2_groups[] = {
+ "gpio91", "gpio95", "gpio96", "gpio97", "gpio101"
+};
+static const char * const uim_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const uim_batt_alarm_groups[] = {
+ "gpio102"
+};
+static const struct msm_function apq8084_functions[] = {
+ FUNCTION(adsp_ext),
+ FUNCTION(audio_ref),
+ FUNCTION(blsp_i2c1),
+ FUNCTION(blsp_i2c2),
+ FUNCTION(blsp_i2c3),
+ FUNCTION(blsp_i2c4),
+ FUNCTION(blsp_i2c5),
+ FUNCTION(blsp_i2c6),
+ FUNCTION(blsp_i2c7),
+ FUNCTION(blsp_i2c8),
+ FUNCTION(blsp_i2c9),
+ FUNCTION(blsp_i2c10),
+ FUNCTION(blsp_i2c11),
+ FUNCTION(blsp_i2c12),
+ FUNCTION(blsp_spi1),
+ FUNCTION(blsp_spi1_cs1),
+ FUNCTION(blsp_spi1_cs2),
+ FUNCTION(blsp_spi1_cs3),
+ FUNCTION(blsp_spi2),
+ FUNCTION(blsp_spi3),
+ FUNCTION(blsp_spi3_cs1),
+ FUNCTION(blsp_spi3_cs2),
+ FUNCTION(blsp_spi3_cs3),
+ FUNCTION(blsp_spi4),
+ FUNCTION(blsp_spi5),
+ FUNCTION(blsp_spi6),
+ FUNCTION(blsp_spi7),
+ FUNCTION(blsp_spi8),
+ FUNCTION(blsp_spi9),
+ FUNCTION(blsp_spi10),
+ FUNCTION(blsp_spi10_cs1),
+ FUNCTION(blsp_spi10_cs2),
+ FUNCTION(blsp_spi10_cs3),
+ FUNCTION(blsp_spi11),
+ FUNCTION(blsp_spi12),
+ FUNCTION(blsp_uart1),
+ FUNCTION(blsp_uart2),
+ FUNCTION(blsp_uart3),
+ FUNCTION(blsp_uart4),
+ FUNCTION(blsp_uart5),
+ FUNCTION(blsp_uart6),
+ FUNCTION(blsp_uart7),
+ FUNCTION(blsp_uart8),
+ FUNCTION(blsp_uart9),
+ FUNCTION(blsp_uart10),
+ FUNCTION(blsp_uart11),
+ FUNCTION(blsp_uart12),
+ FUNCTION(blsp_uim1),
+ FUNCTION(blsp_uim2),
+ FUNCTION(blsp_uim3),
+ FUNCTION(blsp_uim4),
+ FUNCTION(blsp_uim5),
+ FUNCTION(blsp_uim6),
+ FUNCTION(blsp_uim7),
+ FUNCTION(blsp_uim8),
+ FUNCTION(blsp_uim9),
+ FUNCTION(blsp_uim10),
+ FUNCTION(blsp_uim11),
+ FUNCTION(blsp_uim12),
+ FUNCTION(cam_mclk0),
+ FUNCTION(cam_mclk1),
+ FUNCTION(cam_mclk2),
+ FUNCTION(cam_mclk3),
+ FUNCTION(cci_async),
+ FUNCTION(cci_async_in0),
+ FUNCTION(cci_i2c0),
+ FUNCTION(cci_i2c1),
+ FUNCTION(cci_timer0),
+ FUNCTION(cci_timer1),
+ FUNCTION(cci_timer2),
+ FUNCTION(cci_timer3),
+ FUNCTION(cci_timer4),
+ FUNCTION(edp_hpd),
+ FUNCTION(gcc_gp1),
+ FUNCTION(gcc_gp2),
+ FUNCTION(gcc_gp3),
+ FUNCTION(gcc_obt),
+ FUNCTION(gcc_vtt),
+ FUNCTION(gp_mn),
+ FUNCTION(gp_pdm0),
+ FUNCTION(gp_pdm1),
+ FUNCTION(gp_pdm2),
+ FUNCTION(gp0_clk),
+ FUNCTION(gp1_clk),
+ FUNCTION(gpio),
+ FUNCTION(hdmi_cec),
+ FUNCTION(hdmi_ddc),
+ FUNCTION(hdmi_dtest),
+ FUNCTION(hdmi_hpd),
+ FUNCTION(hdmi_rcv),
+ FUNCTION(hsic),
+ FUNCTION(ldo_en),
+ FUNCTION(ldo_update),
+ FUNCTION(mdp_vsync),
+ FUNCTION(pci_e0),
+ FUNCTION(pci_e0_n),
+ FUNCTION(pci_e0_rst),
+ FUNCTION(pci_e1),
+ FUNCTION(pci_e1_rst),
+ FUNCTION(pci_e1_rst_n),
+ FUNCTION(pci_e1_clkreq_n),
+ FUNCTION(pri_mi2s),
+ FUNCTION(qua_mi2s),
+ FUNCTION(sata_act),
+ FUNCTION(sata_devsleep),
+ FUNCTION(sata_devsleep_n),
+ FUNCTION(sd_write),
+ FUNCTION(sdc_emmc_mode),
+ FUNCTION(sdc3),
+ FUNCTION(sdc4),
+ FUNCTION(sec_mi2s),
+ FUNCTION(slimbus),
+ FUNCTION(spdif_tx),
+ FUNCTION(spkr_i2s),
+ FUNCTION(spkr_i2s_ws),
+ FUNCTION(spss_geni),
+ FUNCTION(ter_mi2s),
+ FUNCTION(tsif1),
+ FUNCTION(tsif2),
+ FUNCTION(uim),
+ FUNCTION(uim_batt_alarm),
+};
+
+static const struct msm_pingroup apq8084_groups[] = {
+ PINGROUP(0, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(1, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(2, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(3, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(4, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(5, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(8, blsp_spi3, blsp_uart3, blsp_uim3, spss_geni, NA, NA, NA),
+ PINGROUP(9, blsp_spi3, blsp_uim3, blsp_uart3, spss_geni, NA, NA, NA),
+ PINGROUP(10, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(11, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(12, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(13, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(14, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(15, cam_mclk0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(16, cam_mclk1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(17, cam_mclk2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(18, cam_mclk3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(19, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(20, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(21, cci_i2c1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(22, cci_i2c1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(23, cci_timer0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(24, cci_timer1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(25, cci_timer2, gp0_clk, NA, NA, NA, NA, NA),
+ PINGROUP(26, cci_timer3, cci_async, gp1_clk, NA, NA, NA, NA),
+ PINGROUP(27, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(28, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(29, blsp_spi4, blsp_uart4, blsp_i2c4, gp_mn, NA, NA, NA),
+ PINGROUP(30, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA, NA),
+ PINGROUP(31, hdmi_cec, NA, NA, NA, NA, NA, NA),
+ PINGROUP(32, hdmi_ddc, NA, NA, NA, NA, NA, NA),
+ PINGROUP(33, hdmi_ddc, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, hdmi_hpd, NA, adsp_ext, NA, NA, NA, NA),
+ PINGROUP(35, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(36, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(37, gcc_gp1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(38, gcc_gp2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(39, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(40, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(41, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(42, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(43, blsp_spi6, blsp_uart6, blsp_uim6, NA, NA, NA, NA),
+ PINGROUP(44, blsp_spi6, blsp_uart6, blsp_uim6, NA, NA, NA, NA),
+ PINGROUP(45, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(46, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(47, blsp_spi12, blsp_uart12, blsp_uim12, NA, NA, NA, NA),
+ PINGROUP(48, blsp_spi12, blsp_uart12, blsp_uim12, gp_pdm0, NA, NA, NA),
+ PINGROUP(49, blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA),
+ PINGROUP(50, blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA),
+ PINGROUP(51, blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA),
+ PINGROUP(52, blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA),
+ PINGROUP(53, blsp_spi8, blsp_uart8, blsp_i2c8, NA, NA, NA, NA),
+ PINGROUP(54, blsp_spi8, blsp_uart8, blsp_i2c8, NA, NA, NA, NA),
+ PINGROUP(55, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA),
+ PINGROUP(56, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA),
+ PINGROUP(57, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA),
+ PINGROUP(58, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA),
+ PINGROUP(59, blsp_spi10, blsp_uart10, blsp_uim10, NA, NA, NA, NA),
+ PINGROUP(60, blsp_spi10, blsp_uart10, blsp_uim10, NA, NA, NA, NA),
+ PINGROUP(61, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA, NA),
+ PINGROUP(62, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA, NA),
+ PINGROUP(63, blsp_spi11, blsp_uart11, blsp_uim11, NA, NA, NA, NA),
+ PINGROUP(64, blsp_spi11, blsp_uart11, blsp_uim11, NA, NA, NA, NA),
+ PINGROUP(65, blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(66, blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(67, sdc3, blsp_spi3_cs1, NA, NA, NA, NA, NA),
+ PINGROUP(68, sdc3, pci_e0, NA, NA, NA, NA, NA),
+ PINGROUP(69, sdc3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(70, sdc3, pci_e0_n, pci_e0, NA, NA, NA, NA),
+ PINGROUP(71, sdc3, blsp_spi3_cs2, NA, NA, NA, NA, NA),
+ PINGROUP(72, sdc3, blsp_spi3_cs3, NA, NA, NA, NA, NA),
+ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(75, sd_write, NA, NA, NA, NA, NA, NA),
+ PINGROUP(76, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(77, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(78, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(79, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(80, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(81, sec_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(82, sec_mi2s, sdc4, tsif1, NA, NA, NA, NA),
+ PINGROUP(83, sec_mi2s, sdc4, tsif1, NA, NA, NA, gp_pdm0),
+ PINGROUP(84, sec_mi2s, sdc4, tsif1, NA, NA, NA, gp_pdm1),
+ PINGROUP(85, sec_mi2s, sdc4, tsif1, NA, gp_pdm2, NA, NA),
+ PINGROUP(86, ter_mi2s, sdc4, tsif1, NA, NA, NA, gcc_gp3),
+ PINGROUP(87, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(88, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(89, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(90, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(91, qua_mi2s, sdc4, tsif2, NA, NA, NA, NA),
+ PINGROUP(92, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(93, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(94, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(95, qua_mi2s, sdc4, tsif2, NA, NA, NA, gcc_gp1),
+ PINGROUP(96, qua_mi2s, sdc4, tsif2, NA, NA, NA, gcc_gp2),
+ PINGROUP(97, qua_mi2s, sdc4, tsif2, NA, gcc_gp3, NA, NA),
+ PINGROUP(98, slimbus, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(99, slimbus, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(100, audio_ref, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(101, sdc4, tsif2, gp_pdm1, NA, NA, NA, NA),
+ PINGROUP(102, uim_batt_alarm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(103, edp_hpd, NA, NA, NA, NA, NA, NA),
+ PINGROUP(104, spkr_i2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(105, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(106, blsp_spi10_cs1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(107, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(108, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(109, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(110, gp_pdm2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(111, blsp_spi10_cs2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(112, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(113, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(114, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(115, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(116, blsp_spi1_cs1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(117, blsp_spi1_cs2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(118, blsp_spi1_cs3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(119, cci_timer4, cci_async, sata_devsleep, sata_devsleep_n, NA, NA, NA),
+ PINGROUP(120, cci_async, NA, NA, NA, NA, NA, NA),
+ PINGROUP(121, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(122, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(123, hdmi_dtest, NA, NA, NA, NA, NA, NA),
+ PINGROUP(124, spdif_tx, ldo_en, NA, NA, NA, NA, NA),
+ PINGROUP(125, ldo_update, hdmi_rcv, NA, NA, NA, NA, NA),
+ PINGROUP(126, gcc_vtt, NA, NA, NA, NA, NA, NA),
+ PINGROUP(127, gcc_obt, NA, NA, NA, NA, NA, NA),
+ PINGROUP(128, blsp_spi10_cs3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(129, sata_act, NA, NA, NA, NA, NA, NA),
+ PINGROUP(130, uim, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
+ PINGROUP(131, uim, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
+ PINGROUP(132, uim, blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA),
+ PINGROUP(133, uim, blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA),
+ PINGROUP(134, hsic, NA, NA, NA, NA, NA, NA),
+ PINGROUP(135, hsic, NA, NA, NA, NA, NA, NA),
+ PINGROUP(136, spdif_tx, NA, NA, NA, NA, NA, NA),
+ PINGROUP(137, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(138, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(139, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(140, pci_e1_rst_n, pci_e1_rst, NA, NA, NA, NA, NA),
+ PINGROUP(141, pci_e1_clkreq_n, NA, NA, NA, NA, NA, NA),
+ PINGROUP(142, spdif_tx, NA, NA, NA, NA, NA, NA),
+ PINGROUP(143, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(144, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(145, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(146, sdc_emmc_mode, NA, NA, NA, NA, NA, NA),
+
+ SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+ SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+ SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+ SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+ SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+ SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 147
+
+static const struct msm_pinctrl_soc_data apq8084_pinctrl = {
+ .pins = apq8084_pins,
+ .npins = ARRAY_SIZE(apq8084_pins),
+ .functions = apq8084_functions,
+ .nfunctions = ARRAY_SIZE(apq8084_functions),
+ .groups = apq8084_groups,
+ .ngroups = ARRAY_SIZE(apq8084_groups),
+ .ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int apq8084_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &apq8084_pinctrl);
+}
+
+static const struct of_device_id apq8084_pinctrl_of_match[] = {
+ { .compatible = "qcom,apq8084-pinctrl", },
+ { },
+};
+
+static struct platform_driver apq8084_pinctrl_driver = {
+ .driver = {
+ .name = "apq8084-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = apq8084_pinctrl_of_match,
+ },
+ .probe = apq8084_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init apq8084_pinctrl_init(void)
+{
+ return platform_driver_register(&apq8084_pinctrl_driver);
+}
+arch_initcall(apq8084_pinctrl_init);
+
+static void __exit apq8084_pinctrl_exit(void)
+{
+ platform_driver_unregister(&apq8084_pinctrl_driver);
+}
+module_exit(apq8084_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm APQ8084 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, apq8084_pinctrl_of_match);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-26 12:45 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linux-arm-kernel
This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
drivers/pinctrl/qcom/Kconfig | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-apq8084.c | 1243 ++++++++++++++++++++++++++++++++
3 files changed, 1252 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-apq8084.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index d160a71..81275af 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -15,6 +15,14 @@ config PINCTRL_APQ8064
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm APQ8064 platform.
+config PINCTRL_APQ8084
+ tristate "Qualcomm APQ8084 pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm TLMM block found in the Qualcomm APQ8084 platform.
+
config PINCTRL_IPQ8064
tristate "Qualcomm IPQ8064 pin controller driver"
depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 2a02602..ba8519f 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -1,6 +1,7 @@
# Qualcomm pin control drivers
obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
+obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
new file mode 100644
index 0000000..f6f29a2
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c
@@ -0,0 +1,1243 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const struct pinctrl_pin_desc apq8084_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+ PINCTRL_PIN(146, "GPIO_146"),
+
+ PINCTRL_PIN(147, "SDC1_CLK"),
+ PINCTRL_PIN(148, "SDC1_CMD"),
+ PINCTRL_PIN(149, "SDC1_DATA"),
+ PINCTRL_PIN(150, "SDC2_CLK"),
+ PINCTRL_PIN(151, "SDC2_CMD"),
+ PINCTRL_PIN(152, "SDC2_DATA"),
+};
+
+#define DECLARE_APQ_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
+
+DECLARE_APQ_GPIO_PINS(0);
+DECLARE_APQ_GPIO_PINS(1);
+DECLARE_APQ_GPIO_PINS(2);
+DECLARE_APQ_GPIO_PINS(3);
+DECLARE_APQ_GPIO_PINS(4);
+DECLARE_APQ_GPIO_PINS(5);
+DECLARE_APQ_GPIO_PINS(6);
+DECLARE_APQ_GPIO_PINS(7);
+DECLARE_APQ_GPIO_PINS(8);
+DECLARE_APQ_GPIO_PINS(9);
+DECLARE_APQ_GPIO_PINS(10);
+DECLARE_APQ_GPIO_PINS(11);
+DECLARE_APQ_GPIO_PINS(12);
+DECLARE_APQ_GPIO_PINS(13);
+DECLARE_APQ_GPIO_PINS(14);
+DECLARE_APQ_GPIO_PINS(15);
+DECLARE_APQ_GPIO_PINS(16);
+DECLARE_APQ_GPIO_PINS(17);
+DECLARE_APQ_GPIO_PINS(18);
+DECLARE_APQ_GPIO_PINS(19);
+DECLARE_APQ_GPIO_PINS(20);
+DECLARE_APQ_GPIO_PINS(21);
+DECLARE_APQ_GPIO_PINS(22);
+DECLARE_APQ_GPIO_PINS(23);
+DECLARE_APQ_GPIO_PINS(24);
+DECLARE_APQ_GPIO_PINS(25);
+DECLARE_APQ_GPIO_PINS(26);
+DECLARE_APQ_GPIO_PINS(27);
+DECLARE_APQ_GPIO_PINS(28);
+DECLARE_APQ_GPIO_PINS(29);
+DECLARE_APQ_GPIO_PINS(30);
+DECLARE_APQ_GPIO_PINS(31);
+DECLARE_APQ_GPIO_PINS(32);
+DECLARE_APQ_GPIO_PINS(33);
+DECLARE_APQ_GPIO_PINS(34);
+DECLARE_APQ_GPIO_PINS(35);
+DECLARE_APQ_GPIO_PINS(36);
+DECLARE_APQ_GPIO_PINS(37);
+DECLARE_APQ_GPIO_PINS(38);
+DECLARE_APQ_GPIO_PINS(39);
+DECLARE_APQ_GPIO_PINS(40);
+DECLARE_APQ_GPIO_PINS(41);
+DECLARE_APQ_GPIO_PINS(42);
+DECLARE_APQ_GPIO_PINS(43);
+DECLARE_APQ_GPIO_PINS(44);
+DECLARE_APQ_GPIO_PINS(45);
+DECLARE_APQ_GPIO_PINS(46);
+DECLARE_APQ_GPIO_PINS(47);
+DECLARE_APQ_GPIO_PINS(48);
+DECLARE_APQ_GPIO_PINS(49);
+DECLARE_APQ_GPIO_PINS(50);
+DECLARE_APQ_GPIO_PINS(51);
+DECLARE_APQ_GPIO_PINS(52);
+DECLARE_APQ_GPIO_PINS(53);
+DECLARE_APQ_GPIO_PINS(54);
+DECLARE_APQ_GPIO_PINS(55);
+DECLARE_APQ_GPIO_PINS(56);
+DECLARE_APQ_GPIO_PINS(57);
+DECLARE_APQ_GPIO_PINS(58);
+DECLARE_APQ_GPIO_PINS(59);
+DECLARE_APQ_GPIO_PINS(60);
+DECLARE_APQ_GPIO_PINS(61);
+DECLARE_APQ_GPIO_PINS(62);
+DECLARE_APQ_GPIO_PINS(63);
+DECLARE_APQ_GPIO_PINS(64);
+DECLARE_APQ_GPIO_PINS(65);
+DECLARE_APQ_GPIO_PINS(66);
+DECLARE_APQ_GPIO_PINS(67);
+DECLARE_APQ_GPIO_PINS(68);
+DECLARE_APQ_GPIO_PINS(69);
+DECLARE_APQ_GPIO_PINS(70);
+DECLARE_APQ_GPIO_PINS(71);
+DECLARE_APQ_GPIO_PINS(72);
+DECLARE_APQ_GPIO_PINS(73);
+DECLARE_APQ_GPIO_PINS(74);
+DECLARE_APQ_GPIO_PINS(75);
+DECLARE_APQ_GPIO_PINS(76);
+DECLARE_APQ_GPIO_PINS(77);
+DECLARE_APQ_GPIO_PINS(78);
+DECLARE_APQ_GPIO_PINS(79);
+DECLARE_APQ_GPIO_PINS(80);
+DECLARE_APQ_GPIO_PINS(81);
+DECLARE_APQ_GPIO_PINS(82);
+DECLARE_APQ_GPIO_PINS(83);
+DECLARE_APQ_GPIO_PINS(84);
+DECLARE_APQ_GPIO_PINS(85);
+DECLARE_APQ_GPIO_PINS(86);
+DECLARE_APQ_GPIO_PINS(87);
+DECLARE_APQ_GPIO_PINS(88);
+DECLARE_APQ_GPIO_PINS(89);
+DECLARE_APQ_GPIO_PINS(90);
+DECLARE_APQ_GPIO_PINS(91);
+DECLARE_APQ_GPIO_PINS(92);
+DECLARE_APQ_GPIO_PINS(93);
+DECLARE_APQ_GPIO_PINS(94);
+DECLARE_APQ_GPIO_PINS(95);
+DECLARE_APQ_GPIO_PINS(96);
+DECLARE_APQ_GPIO_PINS(97);
+DECLARE_APQ_GPIO_PINS(98);
+DECLARE_APQ_GPIO_PINS(99);
+DECLARE_APQ_GPIO_PINS(100);
+DECLARE_APQ_GPIO_PINS(101);
+DECLARE_APQ_GPIO_PINS(102);
+DECLARE_APQ_GPIO_PINS(103);
+DECLARE_APQ_GPIO_PINS(104);
+DECLARE_APQ_GPIO_PINS(105);
+DECLARE_APQ_GPIO_PINS(106);
+DECLARE_APQ_GPIO_PINS(107);
+DECLARE_APQ_GPIO_PINS(108);
+DECLARE_APQ_GPIO_PINS(109);
+DECLARE_APQ_GPIO_PINS(110);
+DECLARE_APQ_GPIO_PINS(111);
+DECLARE_APQ_GPIO_PINS(112);
+DECLARE_APQ_GPIO_PINS(113);
+DECLARE_APQ_GPIO_PINS(114);
+DECLARE_APQ_GPIO_PINS(115);
+DECLARE_APQ_GPIO_PINS(116);
+DECLARE_APQ_GPIO_PINS(117);
+DECLARE_APQ_GPIO_PINS(118);
+DECLARE_APQ_GPIO_PINS(119);
+DECLARE_APQ_GPIO_PINS(120);
+DECLARE_APQ_GPIO_PINS(121);
+DECLARE_APQ_GPIO_PINS(122);
+DECLARE_APQ_GPIO_PINS(123);
+DECLARE_APQ_GPIO_PINS(124);
+DECLARE_APQ_GPIO_PINS(125);
+DECLARE_APQ_GPIO_PINS(126);
+DECLARE_APQ_GPIO_PINS(127);
+DECLARE_APQ_GPIO_PINS(128);
+DECLARE_APQ_GPIO_PINS(129);
+DECLARE_APQ_GPIO_PINS(130);
+DECLARE_APQ_GPIO_PINS(131);
+DECLARE_APQ_GPIO_PINS(132);
+DECLARE_APQ_GPIO_PINS(133);
+DECLARE_APQ_GPIO_PINS(134);
+DECLARE_APQ_GPIO_PINS(135);
+DECLARE_APQ_GPIO_PINS(136);
+DECLARE_APQ_GPIO_PINS(137);
+DECLARE_APQ_GPIO_PINS(138);
+DECLARE_APQ_GPIO_PINS(139);
+DECLARE_APQ_GPIO_PINS(140);
+DECLARE_APQ_GPIO_PINS(141);
+DECLARE_APQ_GPIO_PINS(142);
+DECLARE_APQ_GPIO_PINS(143);
+DECLARE_APQ_GPIO_PINS(144);
+DECLARE_APQ_GPIO_PINS(145);
+DECLARE_APQ_GPIO_PINS(146);
+
+static const unsigned int sdc1_clk_pins[] = { 147 };
+static const unsigned int sdc1_cmd_pins[] = { 148 };
+static const unsigned int sdc1_data_pins[] = { 149 };
+static const unsigned int sdc2_clk_pins[] = { 150 };
+static const unsigned int sdc2_cmd_pins[] = { 151 };
+static const unsigned int sdc2_data_pins[] = { 152 };
+
+#define FUNCTION(fname) \
+ [APQ_MUX_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ APQ_MUX_gpio, \
+ APQ_MUX_##f1, \
+ APQ_MUX_##f2, \
+ APQ_MUX_##f3, \
+ APQ_MUX_##f4, \
+ APQ_MUX_##f5, \
+ APQ_MUX_##f6, \
+ APQ_MUX_##f7 \
+ }, \
+ .nfuncs = 8, \
+ .ctl_reg = 0x1000 + 0x10 * id, \
+ .io_reg = 0x1004 + 0x10 * id, \
+ .intr_cfg_reg = 0x1008 + 0x10 * id, \
+ .intr_status_reg = 0x100c + 0x10 * id, \
+ .intr_target_reg = 0x400 + 0x4 * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_ack_high = 1, \
+ .intr_target_bit = 0, \
+ .intr_raw_status_bit = 3, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 1, \
+ }
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+enum apq8084_functions {
+ APQ_MUX_adsp_ext,
+ APQ_MUX_audio_ref,
+ APQ_MUX_blsp_i2c1,
+ APQ_MUX_blsp_i2c2,
+ APQ_MUX_blsp_i2c3,
+ APQ_MUX_blsp_i2c4,
+ APQ_MUX_blsp_i2c5,
+ APQ_MUX_blsp_i2c6,
+ APQ_MUX_blsp_i2c7,
+ APQ_MUX_blsp_i2c8,
+ APQ_MUX_blsp_i2c9,
+ APQ_MUX_blsp_i2c10,
+ APQ_MUX_blsp_i2c11,
+ APQ_MUX_blsp_i2c12,
+ APQ_MUX_blsp_spi1,
+ APQ_MUX_blsp_spi1_cs1,
+ APQ_MUX_blsp_spi1_cs2,
+ APQ_MUX_blsp_spi1_cs3,
+ APQ_MUX_blsp_spi2,
+ APQ_MUX_blsp_spi3,
+ APQ_MUX_blsp_spi3_cs1,
+ APQ_MUX_blsp_spi3_cs2,
+ APQ_MUX_blsp_spi3_cs3,
+ APQ_MUX_blsp_spi4,
+ APQ_MUX_blsp_spi5,
+ APQ_MUX_blsp_spi6,
+ APQ_MUX_blsp_spi7,
+ APQ_MUX_blsp_spi8,
+ APQ_MUX_blsp_spi9,
+ APQ_MUX_blsp_spi10,
+ APQ_MUX_blsp_spi10_cs1,
+ APQ_MUX_blsp_spi10_cs2,
+ APQ_MUX_blsp_spi10_cs3,
+ APQ_MUX_blsp_spi11,
+ APQ_MUX_blsp_spi12,
+ APQ_MUX_blsp_uart1,
+ APQ_MUX_blsp_uart2,
+ APQ_MUX_blsp_uart3,
+ APQ_MUX_blsp_uart4,
+ APQ_MUX_blsp_uart5,
+ APQ_MUX_blsp_uart6,
+ APQ_MUX_blsp_uart7,
+ APQ_MUX_blsp_uart8,
+ APQ_MUX_blsp_uart9,
+ APQ_MUX_blsp_uart10,
+ APQ_MUX_blsp_uart11,
+ APQ_MUX_blsp_uart12,
+ APQ_MUX_blsp_uim1,
+ APQ_MUX_blsp_uim2,
+ APQ_MUX_blsp_uim3,
+ APQ_MUX_blsp_uim4,
+ APQ_MUX_blsp_uim5,
+ APQ_MUX_blsp_uim6,
+ APQ_MUX_blsp_uim7,
+ APQ_MUX_blsp_uim8,
+ APQ_MUX_blsp_uim9,
+ APQ_MUX_blsp_uim10,
+ APQ_MUX_blsp_uim11,
+ APQ_MUX_blsp_uim12,
+ APQ_MUX_cam_mclk0,
+ APQ_MUX_cam_mclk1,
+ APQ_MUX_cam_mclk2,
+ APQ_MUX_cam_mclk3,
+ APQ_MUX_cci_async,
+ APQ_MUX_cci_async_in0,
+ APQ_MUX_cci_i2c0,
+ APQ_MUX_cci_i2c1,
+ APQ_MUX_cci_timer0,
+ APQ_MUX_cci_timer1,
+ APQ_MUX_cci_timer2,
+ APQ_MUX_cci_timer3,
+ APQ_MUX_cci_timer4,
+ APQ_MUX_edp_hpd,
+ APQ_MUX_gcc_gp1,
+ APQ_MUX_gcc_gp2,
+ APQ_MUX_gcc_gp3,
+ APQ_MUX_gcc_obt,
+ APQ_MUX_gcc_vtt,
+ APQ_MUX_gp_mn,
+ APQ_MUX_gp_pdm0,
+ APQ_MUX_gp_pdm1,
+ APQ_MUX_gp_pdm2,
+ APQ_MUX_gp0_clk,
+ APQ_MUX_gp1_clk,
+ APQ_MUX_gpio,
+ APQ_MUX_hdmi_cec,
+ APQ_MUX_hdmi_ddc,
+ APQ_MUX_hdmi_dtest,
+ APQ_MUX_hdmi_hpd,
+ APQ_MUX_hdmi_rcv,
+ APQ_MUX_hsic,
+ APQ_MUX_ldo_en,
+ APQ_MUX_ldo_update,
+ APQ_MUX_mdp_vsync,
+ APQ_MUX_pci_e0,
+ APQ_MUX_pci_e0_n,
+ APQ_MUX_pci_e0_rst,
+ APQ_MUX_pci_e1,
+ APQ_MUX_pci_e1_rst,
+ APQ_MUX_pci_e1_rst_n,
+ APQ_MUX_pci_e1_clkreq_n,
+ APQ_MUX_pri_mi2s,
+ APQ_MUX_qua_mi2s,
+ APQ_MUX_sata_act,
+ APQ_MUX_sata_devsleep,
+ APQ_MUX_sata_devsleep_n,
+ APQ_MUX_sd_write,
+ APQ_MUX_sdc_emmc_mode,
+ APQ_MUX_sdc3,
+ APQ_MUX_sdc4,
+ APQ_MUX_sec_mi2s,
+ APQ_MUX_slimbus,
+ APQ_MUX_spdif_tx,
+ APQ_MUX_spkr_i2s,
+ APQ_MUX_spkr_i2s_ws,
+ APQ_MUX_spss_geni,
+ APQ_MUX_ter_mi2s,
+ APQ_MUX_tsif1,
+ APQ_MUX_tsif2,
+ APQ_MUX_uim,
+ APQ_MUX_uim_batt_alarm,
+ APQ_MUX_NA,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+ "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+ "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+ "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+ "gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+ "gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+ "gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146"
+};
+
+static const char * const adsp_ext_groups[] = {
+ "gpio34"
+};
+static const char * const audio_ref_groups[] = {
+ "gpio100"
+};
+static const char * const blsp_i2c1_groups[] = {
+ "gpio2", "gpio3"
+};
+static const char * const blsp_i2c2_groups[] = {
+ "gpio6", "gpio7"
+};
+static const char * const blsp_i2c3_groups[] = {
+ "gpio10", "gpio11"
+};
+static const char * const blsp_i2c4_groups[] = {
+ "gpio29", "gpio30"
+};
+static const char * const blsp_i2c5_groups[] = {
+ "gpio41", "gpio42"
+};
+static const char * const blsp_i2c6_groups[] = {
+ "gpio45", "gpio46"
+};
+static const char * const blsp_i2c7_groups[] = {
+ "gpio132", "gpio133"
+};
+static const char * const blsp_i2c8_groups[] = {
+ "gpio53", "gpio54"
+};
+static const char * const blsp_i2c9_groups[] = {
+ "gpio57", "gpio58"
+};
+static const char * const blsp_i2c10_groups[] = {
+ "gpio61", "gpio62"
+};
+static const char * const blsp_i2c11_groups[] = {
+ "gpio65", "gpio66"
+};
+static const char * const blsp_i2c12_groups[] = {
+ "gpio49", "gpio50"
+};
+static const char * const blsp_spi1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_spi2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_spi3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char * const blsp_spi4_groups[] = {
+ "gpio27", "gpio28", "gpio29", "gpio30"
+};
+static const char * const blsp_spi5_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42"
+};
+static const char * const blsp_spi6_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46"
+};
+static const char * const blsp_spi7_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const blsp_spi8_groups[] = {
+ "gpio51", "gpio52", "gpio53", "gpio54"
+};
+static const char * const blsp_spi9_groups[] = {
+ "gpio55", "gpio56", "gpio57", "gpio58"
+};
+static const char * const blsp_spi10_groups[] = {
+ "gpio59", "gpio60", "gpio61", "gpio62"
+};
+static const char * const blsp_spi11_groups[] = {
+ "gpio63", "gpio64", "gpio65", "gpio66"
+};
+static const char * const blsp_spi12_groups[] = {
+ "gpio47", "gpio48", "gpio49", "gpio50"
+};
+static const char * const blsp_uart1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_uart2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_uart3_groups[] = {
+ "gpio8"
+};
+static const char * const blsp_uart4_groups[] = {
+ "gpio27", "gpio28", "gpio29", "gpio30"
+};
+static const char * const blsp_uart5_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42"
+};
+static const char * const blsp_uart6_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46"
+};
+static const char * const blsp_uart7_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const blsp_uart8_groups[] = {
+ "gpio51", "gpio52", "gpio53", "gpio54"
+};
+static const char * const blsp_uart9_groups[] = {
+ "gpio55", "gpio56", "gpio57", "gpio58"
+};
+static const char * const blsp_uart10_groups[] = {
+ "gpio59", "gpio60", "gpio61", "gpio62"
+};
+static const char * const blsp_uart11_groups[] = {
+ "gpio63", "gpio64", "gpio65", "gpio66"
+};
+static const char * const blsp_uart12_groups[] = {
+ "gpio47", "gpio48", "gpio49", "gpio50"
+};
+static const char * const blsp_uim1_groups[] = {
+ "gpio0", "gpio1"
+};
+static const char * const blsp_uim2_groups[] = {
+ "gpio4", "gpio5"
+};
+static const char * const blsp_uim3_groups[] = {
+ "gpio8", "gpio9"
+};
+static const char * const blsp_uim4_groups[] = {
+ "gpio27", "gpio28"
+};
+static const char * const blsp_uim5_groups[] = {
+ "gpio39", "gpio40"
+};
+static const char * const blsp_uim6_groups[] = {
+ "gpio43", "gpio44"
+};
+static const char * const blsp_uim7_groups[] = {
+ "gpio130", "gpio131"
+};
+static const char * const blsp_uim8_groups[] = {
+ "gpio51", "gpio52"
+};
+static const char * const blsp_uim9_groups[] = {
+ "gpio55", "gpio56"
+};
+static const char * const blsp_uim10_groups[] = {
+ "gpio59", "gpio60"
+};
+static const char * const blsp_uim11_groups[] = {
+ "gpio63", "gpio64"
+};
+static const char * const blsp_uim12_groups[] = {
+ "gpio47", "gpio48"
+};
+static const char * const blsp_spi1_cs1_groups[] = {
+ "gpio116"
+};
+static const char * const blsp_spi1_cs2_groups[] = {
+ "gpio117"
+};
+static const char * const blsp_spi1_cs3_groups[] = {
+ "gpio118"
+};
+static const char * const blsp_spi3_cs1_groups[] = {
+ "gpio67"
+};
+static const char * const blsp_spi3_cs2_groups[] = {
+ "gpio71"
+};
+static const char * const blsp_spi3_cs3_groups[] = {
+ "gpio72"
+};
+static const char * const blsp_spi10_cs1_groups[] = {
+ "gpio106"
+};
+static const char * const blsp_spi10_cs2_groups[] = {
+ "gpio111"
+};
+static const char * const blsp_spi10_cs3_groups[] = {
+ "gpio128"
+};
+static const char * const cam_mclk0_groups[] = {
+ "gpio15"
+};
+static const char * const cam_mclk1_groups[] = {
+ "gpio16"
+};
+static const char * const cam_mclk2_groups[] = {
+ "gpio17"
+};
+static const char * const cam_mclk3_groups[] = {
+ "gpio18"
+};
+static const char * const cci_async_groups[] = {
+ "gpio26", "gpio119"
+};
+static const char * const cci_async_in0_groups[] = {
+ "gpio120"
+};
+static const char * const cci_i2c0_groups[] = {
+ "gpio19", "gpio20"
+};
+static const char * const cci_i2c1_groups[] = {
+ "gpio21", "gpio22"
+};
+static const char * const cci_timer0_groups[] = {
+ "gpio23"
+};
+static const char * const cci_timer1_groups[] = {
+ "gpio24"
+};
+static const char * const cci_timer2_groups[] = {
+ "gpio25"
+};
+static const char * const cci_timer3_groups[] = {
+ "gpio26"
+};
+static const char * const cci_timer4_groups[] = {
+ "gpio119"
+};
+static const char * const edp_hpd_groups[] = {
+ "gpio103"
+};
+static const char * const gcc_gp1_groups[] = {
+ "gpio37"
+};
+static const char * const gcc_gp2_groups[] = {
+ "gpio38"
+};
+static const char * const gcc_gp3_groups[] = {
+ "gpio86"
+};
+static const char * const gcc_obt_groups[] = {
+ "gpio127"
+};
+static const char * const gcc_vtt_groups[] = {
+ "gpio126"
+};
+static const char * const gp_mn_groups[] = {
+ "gpio29"
+};
+static const char * const gp_pdm0_groups[] = {
+ "gpio48", "gpio83"
+};
+static const char * const gp_pdm1_groups[] = {
+ "gpio84", "gpio101"
+};
+static const char * const gp_pdm2_groups[] = {
+ "gpio85", "gpio110"
+};
+static const char * const gp0_clk_groups[] = {
+ "gpio25"
+};
+static const char * const gp1_clk_groups[] = {
+ "gpio26"
+};
+static const char * const hdmi_cec_groups[] = {
+ "gpio31"
+};
+static const char * const hdmi_ddc_groups[] = {
+ "gpio32", "gpio33"
+};
+static const char * const hdmi_dtest_groups[] = {
+ "gpio123"
+};
+static const char * const hdmi_hpd_groups[] = {
+ "gpio34"
+};
+static const char * const hdmi_rcv_groups[] = {
+ "gpio125"
+};
+static const char * const hsic_groups[] = {
+ "gpio134", "gpio135"
+};
+static const char * const ldo_en_groups[] = {
+ "gpio124"
+};
+static const char * const ldo_update_groups[] = {
+ "gpio125"
+};
+static const char * const mdp_vsync_groups[] = {
+ "gpio12", "gpio13", "gpio14"
+};
+static const char * const pci_e0_groups[] = {
+ "gpio68", "gpio70"
+};
+static const char * const pci_e0_n_groups[] = {
+ "gpio68", "gpio70"
+};
+static const char * const pci_e0_rst_groups[] = {
+ "gpio70"
+};
+static const char * const pci_e1_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_rst_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_rst_n_groups[] = {
+ "gpio140"
+};
+static const char * const pci_e1_clkreq_n_groups[] = {
+ "gpio141"
+};
+static const char * const pri_mi2s_groups[] = {
+ "gpio76", "gpio77", "gpio78", "gpio79", "gpio80"
+};
+static const char * const qua_mi2s_groups[] = {
+ "gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97"
+};
+static const char * const sata_act_groups[] = {
+ "gpio129"
+};
+static const char * const sata_devsleep_groups[] = {
+ "gpio119"
+};
+static const char * const sata_devsleep_n_groups[] = {
+ "gpio119"
+};
+static const char * const sd_write_groups[] = {
+ "gpio75"
+};
+static const char * const sdc_emmc_mode_groups[] = {
+ "gpio146"
+};
+static const char * const sdc3_groups[] = {
+ "gpio67", "gpio68", "gpio69", "gpio70", "gpio71", "gpio72"
+};
+static const char * const sdc4_groups[] = {
+ "gpio82", "gpio83", "gpio84", "gpio85", "gpio86",
+ "gpio91", "gpio95", "gpio96", "gpio97", "gpio101"
+};
+static const char * const sec_mi2s_groups[] = {
+ "gpio81", "gpio82", "gpio83", "gpio84", "gpio85"
+};
+static const char * const slimbus_groups[] = {
+ "gpio98", "gpio99"
+};
+static const char * const spdif_tx_groups[] = {
+ "gpio124", "gpio136", "gpio142"
+};
+static const char * const spkr_i2s_groups[] = {
+ "gpio98", "gpio99", "gpio100"
+};
+static const char * const spkr_i2s_ws_groups[] = {
+ "gpio104"
+};
+static const char * const spss_geni_groups[] = {
+ "gpio8", "gpio9"
+};
+static const char * const ter_mi2s_groups[] = {
+ "gpio86", "gpio87", "gpio88", "gpio89", "gpio90"
+};
+static const char * const tsif1_groups[] = {
+ "gpio82", "gpio83", "gpio84", "gpio85", "gpio86"
+};
+static const char * const tsif2_groups[] = {
+ "gpio91", "gpio95", "gpio96", "gpio97", "gpio101"
+};
+static const char * const uim_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133"
+};
+static const char * const uim_batt_alarm_groups[] = {
+ "gpio102"
+};
+static const struct msm_function apq8084_functions[] = {
+ FUNCTION(adsp_ext),
+ FUNCTION(audio_ref),
+ FUNCTION(blsp_i2c1),
+ FUNCTION(blsp_i2c2),
+ FUNCTION(blsp_i2c3),
+ FUNCTION(blsp_i2c4),
+ FUNCTION(blsp_i2c5),
+ FUNCTION(blsp_i2c6),
+ FUNCTION(blsp_i2c7),
+ FUNCTION(blsp_i2c8),
+ FUNCTION(blsp_i2c9),
+ FUNCTION(blsp_i2c10),
+ FUNCTION(blsp_i2c11),
+ FUNCTION(blsp_i2c12),
+ FUNCTION(blsp_spi1),
+ FUNCTION(blsp_spi1_cs1),
+ FUNCTION(blsp_spi1_cs2),
+ FUNCTION(blsp_spi1_cs3),
+ FUNCTION(blsp_spi2),
+ FUNCTION(blsp_spi3),
+ FUNCTION(blsp_spi3_cs1),
+ FUNCTION(blsp_spi3_cs2),
+ FUNCTION(blsp_spi3_cs3),
+ FUNCTION(blsp_spi4),
+ FUNCTION(blsp_spi5),
+ FUNCTION(blsp_spi6),
+ FUNCTION(blsp_spi7),
+ FUNCTION(blsp_spi8),
+ FUNCTION(blsp_spi9),
+ FUNCTION(blsp_spi10),
+ FUNCTION(blsp_spi10_cs1),
+ FUNCTION(blsp_spi10_cs2),
+ FUNCTION(blsp_spi10_cs3),
+ FUNCTION(blsp_spi11),
+ FUNCTION(blsp_spi12),
+ FUNCTION(blsp_uart1),
+ FUNCTION(blsp_uart2),
+ FUNCTION(blsp_uart3),
+ FUNCTION(blsp_uart4),
+ FUNCTION(blsp_uart5),
+ FUNCTION(blsp_uart6),
+ FUNCTION(blsp_uart7),
+ FUNCTION(blsp_uart8),
+ FUNCTION(blsp_uart9),
+ FUNCTION(blsp_uart10),
+ FUNCTION(blsp_uart11),
+ FUNCTION(blsp_uart12),
+ FUNCTION(blsp_uim1),
+ FUNCTION(blsp_uim2),
+ FUNCTION(blsp_uim3),
+ FUNCTION(blsp_uim4),
+ FUNCTION(blsp_uim5),
+ FUNCTION(blsp_uim6),
+ FUNCTION(blsp_uim7),
+ FUNCTION(blsp_uim8),
+ FUNCTION(blsp_uim9),
+ FUNCTION(blsp_uim10),
+ FUNCTION(blsp_uim11),
+ FUNCTION(blsp_uim12),
+ FUNCTION(cam_mclk0),
+ FUNCTION(cam_mclk1),
+ FUNCTION(cam_mclk2),
+ FUNCTION(cam_mclk3),
+ FUNCTION(cci_async),
+ FUNCTION(cci_async_in0),
+ FUNCTION(cci_i2c0),
+ FUNCTION(cci_i2c1),
+ FUNCTION(cci_timer0),
+ FUNCTION(cci_timer1),
+ FUNCTION(cci_timer2),
+ FUNCTION(cci_timer3),
+ FUNCTION(cci_timer4),
+ FUNCTION(edp_hpd),
+ FUNCTION(gcc_gp1),
+ FUNCTION(gcc_gp2),
+ FUNCTION(gcc_gp3),
+ FUNCTION(gcc_obt),
+ FUNCTION(gcc_vtt),
+ FUNCTION(gp_mn),
+ FUNCTION(gp_pdm0),
+ FUNCTION(gp_pdm1),
+ FUNCTION(gp_pdm2),
+ FUNCTION(gp0_clk),
+ FUNCTION(gp1_clk),
+ FUNCTION(gpio),
+ FUNCTION(hdmi_cec),
+ FUNCTION(hdmi_ddc),
+ FUNCTION(hdmi_dtest),
+ FUNCTION(hdmi_hpd),
+ FUNCTION(hdmi_rcv),
+ FUNCTION(hsic),
+ FUNCTION(ldo_en),
+ FUNCTION(ldo_update),
+ FUNCTION(mdp_vsync),
+ FUNCTION(pci_e0),
+ FUNCTION(pci_e0_n),
+ FUNCTION(pci_e0_rst),
+ FUNCTION(pci_e1),
+ FUNCTION(pci_e1_rst),
+ FUNCTION(pci_e1_rst_n),
+ FUNCTION(pci_e1_clkreq_n),
+ FUNCTION(pri_mi2s),
+ FUNCTION(qua_mi2s),
+ FUNCTION(sata_act),
+ FUNCTION(sata_devsleep),
+ FUNCTION(sata_devsleep_n),
+ FUNCTION(sd_write),
+ FUNCTION(sdc_emmc_mode),
+ FUNCTION(sdc3),
+ FUNCTION(sdc4),
+ FUNCTION(sec_mi2s),
+ FUNCTION(slimbus),
+ FUNCTION(spdif_tx),
+ FUNCTION(spkr_i2s),
+ FUNCTION(spkr_i2s_ws),
+ FUNCTION(spss_geni),
+ FUNCTION(ter_mi2s),
+ FUNCTION(tsif1),
+ FUNCTION(tsif2),
+ FUNCTION(uim),
+ FUNCTION(uim_batt_alarm),
+};
+
+static const struct msm_pingroup apq8084_groups[] = {
+ PINGROUP(0, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(1, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(2, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(3, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(4, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(5, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(8, blsp_spi3, blsp_uart3, blsp_uim3, spss_geni, NA, NA, NA),
+ PINGROUP(9, blsp_spi3, blsp_uim3, blsp_uart3, spss_geni, NA, NA, NA),
+ PINGROUP(10, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(11, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(12, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(13, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(14, mdp_vsync, NA, NA, NA, NA, NA, NA),
+ PINGROUP(15, cam_mclk0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(16, cam_mclk1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(17, cam_mclk2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(18, cam_mclk3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(19, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(20, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(21, cci_i2c1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(22, cci_i2c1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(23, cci_timer0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(24, cci_timer1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(25, cci_timer2, gp0_clk, NA, NA, NA, NA, NA),
+ PINGROUP(26, cci_timer3, cci_async, gp1_clk, NA, NA, NA, NA),
+ PINGROUP(27, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(28, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(29, blsp_spi4, blsp_uart4, blsp_i2c4, gp_mn, NA, NA, NA),
+ PINGROUP(30, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA, NA),
+ PINGROUP(31, hdmi_cec, NA, NA, NA, NA, NA, NA),
+ PINGROUP(32, hdmi_ddc, NA, NA, NA, NA, NA, NA),
+ PINGROUP(33, hdmi_ddc, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, hdmi_hpd, NA, adsp_ext, NA, NA, NA, NA),
+ PINGROUP(35, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(36, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(37, gcc_gp1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(38, gcc_gp2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(39, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(40, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(41, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(42, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(43, blsp_spi6, blsp_uart6, blsp_uim6, NA, NA, NA, NA),
+ PINGROUP(44, blsp_spi6, blsp_uart6, blsp_uim6, NA, NA, NA, NA),
+ PINGROUP(45, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(46, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(47, blsp_spi12, blsp_uart12, blsp_uim12, NA, NA, NA, NA),
+ PINGROUP(48, blsp_spi12, blsp_uart12, blsp_uim12, gp_pdm0, NA, NA, NA),
+ PINGROUP(49, blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA),
+ PINGROUP(50, blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA),
+ PINGROUP(51, blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA),
+ PINGROUP(52, blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA),
+ PINGROUP(53, blsp_spi8, blsp_uart8, blsp_i2c8, NA, NA, NA, NA),
+ PINGROUP(54, blsp_spi8, blsp_uart8, blsp_i2c8, NA, NA, NA, NA),
+ PINGROUP(55, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA),
+ PINGROUP(56, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA),
+ PINGROUP(57, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA),
+ PINGROUP(58, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA),
+ PINGROUP(59, blsp_spi10, blsp_uart10, blsp_uim10, NA, NA, NA, NA),
+ PINGROUP(60, blsp_spi10, blsp_uart10, blsp_uim10, NA, NA, NA, NA),
+ PINGROUP(61, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA, NA),
+ PINGROUP(62, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA, NA),
+ PINGROUP(63, blsp_spi11, blsp_uart11, blsp_uim11, NA, NA, NA, NA),
+ PINGROUP(64, blsp_spi11, blsp_uart11, blsp_uim11, NA, NA, NA, NA),
+ PINGROUP(65, blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(66, blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(67, sdc3, blsp_spi3_cs1, NA, NA, NA, NA, NA),
+ PINGROUP(68, sdc3, pci_e0, NA, NA, NA, NA, NA),
+ PINGROUP(69, sdc3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(70, sdc3, pci_e0_n, pci_e0, NA, NA, NA, NA),
+ PINGROUP(71, sdc3, blsp_spi3_cs2, NA, NA, NA, NA, NA),
+ PINGROUP(72, sdc3, blsp_spi3_cs3, NA, NA, NA, NA, NA),
+ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(75, sd_write, NA, NA, NA, NA, NA, NA),
+ PINGROUP(76, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(77, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(78, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(79, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(80, pri_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(81, sec_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(82, sec_mi2s, sdc4, tsif1, NA, NA, NA, NA),
+ PINGROUP(83, sec_mi2s, sdc4, tsif1, NA, NA, NA, gp_pdm0),
+ PINGROUP(84, sec_mi2s, sdc4, tsif1, NA, NA, NA, gp_pdm1),
+ PINGROUP(85, sec_mi2s, sdc4, tsif1, NA, gp_pdm2, NA, NA),
+ PINGROUP(86, ter_mi2s, sdc4, tsif1, NA, NA, NA, gcc_gp3),
+ PINGROUP(87, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(88, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(89, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(90, ter_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(91, qua_mi2s, sdc4, tsif2, NA, NA, NA, NA),
+ PINGROUP(92, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(93, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(94, qua_mi2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(95, qua_mi2s, sdc4, tsif2, NA, NA, NA, gcc_gp1),
+ PINGROUP(96, qua_mi2s, sdc4, tsif2, NA, NA, NA, gcc_gp2),
+ PINGROUP(97, qua_mi2s, sdc4, tsif2, NA, gcc_gp3, NA, NA),
+ PINGROUP(98, slimbus, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(99, slimbus, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(100, audio_ref, spkr_i2s, NA, NA, NA, NA, NA),
+ PINGROUP(101, sdc4, tsif2, gp_pdm1, NA, NA, NA, NA),
+ PINGROUP(102, uim_batt_alarm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(103, edp_hpd, NA, NA, NA, NA, NA, NA),
+ PINGROUP(104, spkr_i2s, NA, NA, NA, NA, NA, NA),
+ PINGROUP(105, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(106, blsp_spi10_cs1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(107, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(108, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(109, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(110, gp_pdm2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(111, blsp_spi10_cs2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(112, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(113, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(114, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(115, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(116, blsp_spi1_cs1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(117, blsp_spi1_cs2, NA, NA, NA, NA, NA, NA),
+ PINGROUP(118, blsp_spi1_cs3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(119, cci_timer4, cci_async, sata_devsleep, sata_devsleep_n, NA, NA, NA),
+ PINGROUP(120, cci_async, NA, NA, NA, NA, NA, NA),
+ PINGROUP(121, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(122, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(123, hdmi_dtest, NA, NA, NA, NA, NA, NA),
+ PINGROUP(124, spdif_tx, ldo_en, NA, NA, NA, NA, NA),
+ PINGROUP(125, ldo_update, hdmi_rcv, NA, NA, NA, NA, NA),
+ PINGROUP(126, gcc_vtt, NA, NA, NA, NA, NA, NA),
+ PINGROUP(127, gcc_obt, NA, NA, NA, NA, NA, NA),
+ PINGROUP(128, blsp_spi10_cs3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(129, sata_act, NA, NA, NA, NA, NA, NA),
+ PINGROUP(130, uim, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
+ PINGROUP(131, uim, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
+ PINGROUP(132, uim, blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA),
+ PINGROUP(133, uim, blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA),
+ PINGROUP(134, hsic, NA, NA, NA, NA, NA, NA),
+ PINGROUP(135, hsic, NA, NA, NA, NA, NA, NA),
+ PINGROUP(136, spdif_tx, NA, NA, NA, NA, NA, NA),
+ PINGROUP(137, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(138, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(139, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(140, pci_e1_rst_n, pci_e1_rst, NA, NA, NA, NA, NA),
+ PINGROUP(141, pci_e1_clkreq_n, NA, NA, NA, NA, NA, NA),
+ PINGROUP(142, spdif_tx, NA, NA, NA, NA, NA, NA),
+ PINGROUP(143, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(144, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(145, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(146, sdc_emmc_mode, NA, NA, NA, NA, NA, NA),
+
+ SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+ SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+ SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+ SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+ SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+ SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 147
+
+static const struct msm_pinctrl_soc_data apq8084_pinctrl = {
+ .pins = apq8084_pins,
+ .npins = ARRAY_SIZE(apq8084_pins),
+ .functions = apq8084_functions,
+ .nfunctions = ARRAY_SIZE(apq8084_functions),
+ .groups = apq8084_groups,
+ .ngroups = ARRAY_SIZE(apq8084_groups),
+ .ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int apq8084_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &apq8084_pinctrl);
+}
+
+static const struct of_device_id apq8084_pinctrl_of_match[] = {
+ { .compatible = "qcom,apq8084-pinctrl", },
+ { },
+};
+
+static struct platform_driver apq8084_pinctrl_driver = {
+ .driver = {
+ .name = "apq8084-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = apq8084_pinctrl_of_match,
+ },
+ .probe = apq8084_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init apq8084_pinctrl_init(void)
+{
+ return platform_driver_register(&apq8084_pinctrl_driver);
+}
+arch_initcall(apq8084_pinctrl_init);
+
+static void __exit apq8084_pinctrl_exit(void)
+{
+ platform_driver_unregister(&apq8084_pinctrl_driver);
+}
+module_exit(apq8084_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm APQ8084 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, apq8084_pinctrl_of_match);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
2014-08-26 12:45 ` Georgi Djakov
@ 2014-08-26 12:45 ` Georgi Djakov
-1 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linus.walleij, galak, bjorn.andersson, agross
Cc: robh+dt, mark.rutland, grant.likely, sboyd, iivanov, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm, Georgi Djakov
Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
controller inside the APQ8084.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 104 ++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
new file mode 100644
index 0000000..d0d9a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,104 @@
+Qualcomm APQ8084 TLMM block
+
+Required properties:
+- compatible: "qcom,apq8084-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+Valid values for pins are:
+ gpio0-gpio146
+ Supports mux, bias and drive-strength
+
+ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
+ Supports bias and drive-strength
+
+Valid values for function are:
+adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
+blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
+blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
+blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
+cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
+gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
+hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
+pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
+pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
+sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
+spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
+
+Example:
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_default>;
+
+ uart2_default: uart2_default {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ };
+
+ tx {
+ pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+
+ rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-26 12:45 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linux-arm-kernel
Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
controller inside the APQ8084.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 104 ++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
new file mode 100644
index 0000000..d0d9a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,104 @@
+Qualcomm APQ8084 TLMM block
+
+Required properties:
+- compatible: "qcom,apq8084-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+Valid values for pins are:
+ gpio0-gpio146
+ Supports mux, bias and drive-strength
+
+ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
+ Supports bias and drive-strength
+
+Valid values for function are:
+adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
+blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
+blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
+blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
+cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
+gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
+hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
+pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
+pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
+sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
+spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
+
+Example:
+
+ tlmm: pinctrl at fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_default>;
+
+ uart2_default: uart2_default {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ };
+
+ tx {
+ pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+
+ rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 3/3] ARM: dts: qcom: Add TLMM DT node for APQ8084
2014-08-26 12:45 ` Georgi Djakov
@ 2014-08-26 12:45 ` Georgi Djakov
-1 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linus.walleij, galak, bjorn.andersson, agross
Cc: robh+dt, mark.rutland, grant.likely, sboyd, iivanov, devicetree,
linux-kernel, linux-arm-kernel, linux-arm-msm, Georgi Djakov
This patch adds the TLMM node for the APQ8084 platform.
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index b5b156e..21d01e5 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -185,6 +185,16 @@
reg = <0xfc400000 0x4000>;
};
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 3/3] ARM: dts: qcom: Add TLMM DT node for APQ8084
@ 2014-08-26 12:45 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-26 12:45 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the TLMM node for the APQ8084 platform.
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index b5b156e..21d01e5 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -185,6 +185,16 @@
reg = <0xfc400000 0x4000>;
};
+ tlmm: pinctrl at fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
serial at f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
2014-08-26 12:45 ` Georgi Djakov
@ 2014-08-27 21:53 ` Andy Gross
-1 siblings, 0 replies; 27+ messages in thread
From: Andy Gross @ 2014-08-27 21:53 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, bjorn.andersson, mark.rutland, devicetree,
linux-arm-msm, sboyd, linux-kernel, robh+dt, iivanov,
grant.likely, linux-arm-kernel
On Tue, Aug 26, 2014 at 03:45:54PM +0300, Georgi Djakov wrote:
> This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks good. I'll try to test this tomorrow, but for now....
Reviewed-by: Andy Gross <agross@codeaurora.org>
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-27 21:53 ` Andy Gross
0 siblings, 0 replies; 27+ messages in thread
From: Andy Gross @ 2014-08-27 21:53 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 26, 2014 at 03:45:54PM +0300, Georgi Djakov wrote:
> This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks good. I'll try to test this tomorrow, but for now....
Reviewed-by: Andy Gross <agross@codeaurora.org>
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
2014-08-26 12:45 ` Georgi Djakov
@ 2014-08-27 21:58 ` Andy Gross
-1 siblings, 0 replies; 27+ messages in thread
From: Andy Gross @ 2014-08-27 21:58 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, bjorn.andersson, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue, Aug 26, 2014 at 03:45:55PM +0300, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks fine.
Reviewed-by: Andy Gross <agross@codeaurora.org>
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-27 21:58 ` Andy Gross
0 siblings, 0 replies; 27+ messages in thread
From: Andy Gross @ 2014-08-27 21:58 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 26, 2014 at 03:45:55PM +0300, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks fine.
Reviewed-by: Andy Gross <agross@codeaurora.org>
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
2014-08-26 12:45 ` Georgi Djakov
(?)
@ 2014-08-29 5:30 ` Linus Walleij
-1 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2014-08-29 5:30 UTC (permalink / raw)
To: Georgi Djakov, Bjorn Andersson
Cc: Kumar Gala, Andy Gross, Rob Herring, Mark Rutland, Grant Likely,
Stephen Boyd, Ivan T. Ivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue, Aug 26, 2014 at 2:45 PM, Georgi Djakov <gdjakov@mm-sol.com> wrote:
> This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks good to me, but waiting for Björn's review before
merging.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 5:30 ` Linus Walleij
0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2014-08-29 5:30 UTC (permalink / raw)
To: Georgi Djakov, Bjorn Andersson
Cc: Kumar Gala, Andy Gross, Rob Herring, Mark Rutland, Grant Likely,
Stephen Boyd, Ivan T. Ivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue, Aug 26, 2014 at 2:45 PM, Georgi Djakov <gdjakov@mm-sol.com> wrote:
> This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks good to me, but waiting for Björn's review before
merging.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 5:30 ` Linus Walleij
0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2014-08-29 5:30 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 26, 2014 at 2:45 PM, Georgi Djakov <gdjakov@mm-sol.com> wrote:
> This patchset adds pinctrl support for the Qualcomm APQ8084 platform.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Looks good to me, but waiting for Bj?rn's review before
merging.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
2014-08-26 12:45 ` Georgi Djakov
(?)
@ 2014-08-29 6:01 ` Bjorn Andersson
-1 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:01 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
Hi Georgi,
Sorry for missing this before, but I did a quick walkthrough and unfortunately
the gpio configuration needs a few updates.
> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
[...]
> +
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .npins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + APQ_MUX_gpio, \
> + APQ_MUX_##f1, \
> + APQ_MUX_##f2, \
> + APQ_MUX_##f3, \
> + APQ_MUX_##f4, \
> + APQ_MUX_##f5, \
> + APQ_MUX_##f6, \
> + APQ_MUX_##f7 \
> + }, \
> + .nfuncs = 8, \
> + .ctl_reg = 0x1000 + 0x10 * id, \
> + .io_reg = 0x1004 + 0x10 * id, \
> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
> + .intr_status_reg = 0x100c + 0x10 * id, \
> + .intr_target_reg = 0x400 + 0x4 * id, \
The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
i.e: 0x1008 + 0x10 * n
Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
specify routing the interrupts to KPSS, instead of the previous 4. So the
static define of INTR_TARGET_PROC_APPS is no longer adequate.
My suggestion is that you create an additional patch and add to your series
that moves todays hardcoded 4 into the soc_data for the existing platforms (or
include it in this struct).
> + .mux_bit = 2, \
> + .pull_bit = 0, \
> + .drv_bit = 6, \
> + .oe_bit = 9, \
> + .in_bit = 0, \
> + .out_bit = 1, \
> + .intr_enable_bit = 0, \
> + .intr_status_bit = 0, \
> + .intr_ack_high = 1, \
With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
intr_ack_high should be 0.
> + .intr_target_bit = 0, \
Target bit is 5.
> + .intr_raw_status_bit = 3, \
Raw interrupt status bit is 4.
> + .intr_polarity_bit = 1, \
> + .intr_detection_bit = 2, \
> + .intr_detection_width = 1, \
You can do level, raise, fall and both edge detection with 8084, so the width
of his part is 2.
> + }
> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 6:01 ` Bjorn Andersson
0 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:01 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
Hi Georgi,
Sorry for missing this before, but I did a quick walkthrough and unfortunately
the gpio configuration needs a few updates.
> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
[...]
> +
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .npins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + APQ_MUX_gpio, \
> + APQ_MUX_##f1, \
> + APQ_MUX_##f2, \
> + APQ_MUX_##f3, \
> + APQ_MUX_##f4, \
> + APQ_MUX_##f5, \
> + APQ_MUX_##f6, \
> + APQ_MUX_##f7 \
> + }, \
> + .nfuncs = 8, \
> + .ctl_reg = 0x1000 + 0x10 * id, \
> + .io_reg = 0x1004 + 0x10 * id, \
> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
> + .intr_status_reg = 0x100c + 0x10 * id, \
> + .intr_target_reg = 0x400 + 0x4 * id, \
The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
i.e: 0x1008 + 0x10 * n
Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
specify routing the interrupts to KPSS, instead of the previous 4. So the
static define of INTR_TARGET_PROC_APPS is no longer adequate.
My suggestion is that you create an additional patch and add to your series
that moves todays hardcoded 4 into the soc_data for the existing platforms (or
include it in this struct).
> + .mux_bit = 2, \
> + .pull_bit = 0, \
> + .drv_bit = 6, \
> + .oe_bit = 9, \
> + .in_bit = 0, \
> + .out_bit = 1, \
> + .intr_enable_bit = 0, \
> + .intr_status_bit = 0, \
> + .intr_ack_high = 1, \
With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
intr_ack_high should be 0.
> + .intr_target_bit = 0, \
Target bit is 5.
> + .intr_raw_status_bit = 3, \
Raw interrupt status bit is 4.
> + .intr_polarity_bit = 1, \
> + .intr_detection_bit = 2, \
> + .intr_detection_width = 1, \
You can do level, raise, fall and both edge detection with 8084, so the width
of his part is 2.
> + }
> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 6:01 ` Bjorn Andersson
0 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:01 UTC (permalink / raw)
To: linux-arm-kernel
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
Hi Georgi,
Sorry for missing this before, but I did a quick walkthrough and unfortunately
the gpio configuration needs a few updates.
> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
[...]
> +
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .npins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + APQ_MUX_gpio, \
> + APQ_MUX_##f1, \
> + APQ_MUX_##f2, \
> + APQ_MUX_##f3, \
> + APQ_MUX_##f4, \
> + APQ_MUX_##f5, \
> + APQ_MUX_##f6, \
> + APQ_MUX_##f7 \
> + }, \
> + .nfuncs = 8, \
> + .ctl_reg = 0x1000 + 0x10 * id, \
> + .io_reg = 0x1004 + 0x10 * id, \
> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
> + .intr_status_reg = 0x100c + 0x10 * id, \
> + .intr_target_reg = 0x400 + 0x4 * id, \
The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
i.e: 0x1008 + 0x10 * n
Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
specify routing the interrupts to KPSS, instead of the previous 4. So the
static define of INTR_TARGET_PROC_APPS is no longer adequate.
My suggestion is that you create an additional patch and add to your series
that moves todays hardcoded 4 into the soc_data for the existing platforms (or
include it in this struct).
> + .mux_bit = 2, \
> + .pull_bit = 0, \
> + .drv_bit = 6, \
> + .oe_bit = 9, \
> + .in_bit = 0, \
> + .out_bit = 1, \
> + .intr_enable_bit = 0, \
> + .intr_status_bit = 0, \
> + .intr_ack_high = 1, \
With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
intr_ack_high should be 0.
> + .intr_target_bit = 0, \
Target bit is 5.
> + .intr_raw_status_bit = 3, \
Raw interrupt status bit is 4.
> + .intr_polarity_bit = 1, \
> + .intr_detection_bit = 2, \
> + .intr_detection_width = 1, \
You can do level, raise, fall and both edge detection with 8084, so the width
of his part is 2.
> + }
> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
2014-08-26 12:45 ` Georgi Djakov
(?)
@ 2014-08-29 6:09 ` Bjorn Andersson
-1 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:09 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
[...]
> +Valid values for function are:
> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
It would be nice if these where indented.
Also, the last binding I sent up was for msm8960, where I got some comments
that made me change the format completely. I don't require you to follow that
instead, but I have to vent my opinion saying that it would be nice if you
did ;)
Otherwise, Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-29 6:09 ` Bjorn Andersson
0 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:09 UTC (permalink / raw)
To: Georgi Djakov
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
[...]
> +Valid values for function are:
> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
It would be nice if these where indented.
Also, the last binding I sent up was for msm8960, where I got some comments
that made me change the format completely. I don't require you to follow that
instead, but I have to vent my opinion saying that it would be nice if you
did ;)
Otherwise, Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-29 6:09 ` Bjorn Andersson
0 siblings, 0 replies; 27+ messages in thread
From: Bjorn Andersson @ 2014-08-29 6:09 UTC (permalink / raw)
To: linux-arm-kernel
On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
[...]
> +Valid values for function are:
> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
It would be nice if these where indented.
Also, the last binding I sent up was for msm8960, where I got some comments
that made me change the format completely. I don't require you to follow that
instead, but I have to vent my opinion saying that it would be nice if you
did ;)
Otherwise, Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Regards,
Bjorn
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
2014-08-29 6:01 ` Bjorn Andersson
(?)
@ 2014-08-29 13:09 ` Georgi Djakov
-1 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:09 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 08/29/2014 09:01 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
> Hi Georgi,
>
> Sorry for missing this before, but I did a quick walkthrough and unfortunately
> the gpio configuration needs a few updates.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
> [...]
>> +
>> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
>> + { \
>> + .name = "gpio" #id, \
>> + .pins = gpio##id##_pins, \
>> + .npins = ARRAY_SIZE(gpio##id##_pins), \
>> + .funcs = (int[]){ \
>> + APQ_MUX_gpio, \
>> + APQ_MUX_##f1, \
>> + APQ_MUX_##f2, \
>> + APQ_MUX_##f3, \
>> + APQ_MUX_##f4, \
>> + APQ_MUX_##f5, \
>> + APQ_MUX_##f6, \
>> + APQ_MUX_##f7 \
>> + }, \
>> + .nfuncs = 8, \
>> + .ctl_reg = 0x1000 + 0x10 * id, \
>> + .io_reg = 0x1004 + 0x10 * id, \
>> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
>> + .intr_status_reg = 0x100c + 0x10 * id, \
>> + .intr_target_reg = 0x400 + 0x4 * id, \
>
> The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
> i.e: 0x1008 + 0x10 * n
>
> Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
> specify routing the interrupts to KPSS, instead of the previous 4. So the
> static define of INTR_TARGET_PROC_APPS is no longer adequate.
>
> My suggestion is that you create an additional patch and add to your series
> that moves todays hardcoded 4 into the soc_data for the existing platforms (or
> include it in this struct).
>
>> + .mux_bit = 2, \
>> + .pull_bit = 0, \
>> + .drv_bit = 6, \
>> + .oe_bit = 9, \
>> + .in_bit = 0, \
>> + .out_bit = 1, \
>> + .intr_enable_bit = 0, \
>> + .intr_status_bit = 0, \
>> + .intr_ack_high = 1, \
>
> With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
> intr_ack_high should be 0.
>
>> + .intr_target_bit = 0, \
>
> Target bit is 5.
>
>> + .intr_raw_status_bit = 3, \
>
> Raw interrupt status bit is 4.
>
>> + .intr_polarity_bit = 1, \
>> + .intr_detection_bit = 2, \
>> + .intr_detection_width = 1, \
>
> You can do level, raise, fall and both edge detection with 8084, so the width
> of his part is 2.
>
>> + }
>> +
>
Thanks Bjorn. I'll search for some more information regarding this and will
update accordingly, including the INTR_TARGET_PROC_APPS for each platform.
Thanks again for your time!
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 13:09 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:09 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 08/29/2014 09:01 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
> Hi Georgi,
>
> Sorry for missing this before, but I did a quick walkthrough and unfortunately
> the gpio configuration needs a few updates.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
> [...]
>> +
>> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
>> + { \
>> + .name = "gpio" #id, \
>> + .pins = gpio##id##_pins, \
>> + .npins = ARRAY_SIZE(gpio##id##_pins), \
>> + .funcs = (int[]){ \
>> + APQ_MUX_gpio, \
>> + APQ_MUX_##f1, \
>> + APQ_MUX_##f2, \
>> + APQ_MUX_##f3, \
>> + APQ_MUX_##f4, \
>> + APQ_MUX_##f5, \
>> + APQ_MUX_##f6, \
>> + APQ_MUX_##f7 \
>> + }, \
>> + .nfuncs = 8, \
>> + .ctl_reg = 0x1000 + 0x10 * id, \
>> + .io_reg = 0x1004 + 0x10 * id, \
>> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
>> + .intr_status_reg = 0x100c + 0x10 * id, \
>> + .intr_target_reg = 0x400 + 0x4 * id, \
>
> The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
> i.e: 0x1008 + 0x10 * n
>
> Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
> specify routing the interrupts to KPSS, instead of the previous 4. So the
> static define of INTR_TARGET_PROC_APPS is no longer adequate.
>
> My suggestion is that you create an additional patch and add to your series
> that moves todays hardcoded 4 into the soc_data for the existing platforms (or
> include it in this struct).
>
>> + .mux_bit = 2, \
>> + .pull_bit = 0, \
>> + .drv_bit = 6, \
>> + .oe_bit = 9, \
>> + .in_bit = 0, \
>> + .out_bit = 1, \
>> + .intr_enable_bit = 0, \
>> + .intr_status_bit = 0, \
>> + .intr_ack_high = 1, \
>
> With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
> intr_ack_high should be 0.
>
>> + .intr_target_bit = 0, \
>
> Target bit is 5.
>
>> + .intr_raw_status_bit = 3, \
>
> Raw interrupt status bit is 4.
>
>> + .intr_polarity_bit = 1, \
>> + .intr_detection_bit = 2, \
>> + .intr_detection_width = 1, \
>
> You can do level, raise, fall and both edge detection with 8084, so the width
> of his part is 2.
>
>> + }
>> +
>
Thanks Bjorn. I'll search for some more information regarding this and will
update accordingly, including the INTR_TARGET_PROC_APPS for each platform.
Thanks again for your time!
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 1/3] pinctrl: qcom: Add APQ8084 pinctrl support
@ 2014-08-29 13:09 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:09 UTC (permalink / raw)
To: linux-arm-kernel
On 08/29/2014 09:01 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
> Hi Georgi,
>
> Sorry for missing this before, but I did a quick walkthrough and unfortunately
> the gpio configuration needs a few updates.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-apq8084.c b/drivers/pinctrl/qcom/pinctrl-apq8084.c
> [...]
>> +
>> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
>> + { \
>> + .name = "gpio" #id, \
>> + .pins = gpio##id##_pins, \
>> + .npins = ARRAY_SIZE(gpio##id##_pins), \
>> + .funcs = (int[]){ \
>> + APQ_MUX_gpio, \
>> + APQ_MUX_##f1, \
>> + APQ_MUX_##f2, \
>> + APQ_MUX_##f3, \
>> + APQ_MUX_##f4, \
>> + APQ_MUX_##f5, \
>> + APQ_MUX_##f6, \
>> + APQ_MUX_##f7 \
>> + }, \
>> + .nfuncs = 8, \
>> + .ctl_reg = 0x1000 + 0x10 * id, \
>> + .io_reg = 0x1004 + 0x10 * id, \
>> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
>> + .intr_status_reg = 0x100c + 0x10 * id, \
>> + .intr_target_reg = 0x400 + 0x4 * id, \
>
> The routing of the interrupt is specified in TLMM_GPIO_INTR_CFG(n),
> i.e: 0x1008 + 0x10 * n
>
> Apparently the HW guys wanted to give us more work, so in 8084 they use 3 to
> specify routing the interrupts to KPSS, instead of the previous 4. So the
> static define of INTR_TARGET_PROC_APPS is no longer adequate.
>
> My suggestion is that you create an additional patch and add to your series
> that moves todays hardcoded 4 into the soc_data for the existing platforms (or
> include it in this struct).
>
>> + .mux_bit = 2, \
>> + .pull_bit = 0, \
>> + .drv_bit = 6, \
>> + .oe_bit = 9, \
>> + .in_bit = 0, \
>> + .out_bit = 1, \
>> + .intr_enable_bit = 0, \
>> + .intr_status_bit = 0, \
>> + .intr_ack_high = 1, \
>
> With the 8084 TLMM chip you ack the interrupt status by clearing this bit, so
> intr_ack_high should be 0.
>
>> + .intr_target_bit = 0, \
>
> Target bit is 5.
>
>> + .intr_raw_status_bit = 3, \
>
> Raw interrupt status bit is 4.
>
>> + .intr_polarity_bit = 1, \
>> + .intr_detection_bit = 2, \
>> + .intr_detection_width = 1, \
>
> You can do level, raise, fall and both edge detection with 8084, so the width
> of his part is 2.
>
>> + }
>> +
>
Thanks Bjorn. I'll search for some more information regarding this and will
update accordingly, including the INTR_TARGET_PROC_APPS for each platform.
Thanks again for your time!
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
2014-08-29 6:09 ` Bjorn Andersson
(?)
@ 2014-08-29 13:10 ` Georgi Djakov
-1 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:10 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 08/29/2014 09:09 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
>> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
>> controller inside the APQ8084.
>>
>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
> [...]
>> +Valid values for function are:
>> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
>> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
>> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
>> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
>> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
>> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
>> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
>> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
>> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
>> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
>> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
>> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
>> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
>> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
>> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
>> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
>
> It would be nice if these where indented.
>
> Also, the last binding I sent up was for msm8960, where I got some comments
> that made me change the format completely. I don't require you to follow that
> instead, but I have to vent my opinion saying that it would be nice if you
> did ;)
>
Oh, sorry for missing that and thank you for pointing it out! I will update
and resend.
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-29 13:10 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:10 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linus.walleij, galak, agross, robh+dt, mark.rutland,
grant.likely, sboyd, iivanov, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 08/29/2014 09:09 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
>> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
>> controller inside the APQ8084.
>>
>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
> [...]
>> +Valid values for function are:
>> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
>> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
>> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
>> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
>> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
>> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
>> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
>> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
>> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
>> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
>> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
>> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
>> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
>> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
>> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
>> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
>
> It would be nice if these where indented.
>
> Also, the last binding I sent up was for msm8960, where I got some comments
> that made me change the format completely. I don't require you to follow that
> instead, but I have to vent my opinion saying that it would be nice if you
> did ;)
>
Oh, sorry for missing that and thank you for pointing it out! I will update
and resend.
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding
@ 2014-08-29 13:10 ` Georgi Djakov
0 siblings, 0 replies; 27+ messages in thread
From: Georgi Djakov @ 2014-08-29 13:10 UTC (permalink / raw)
To: linux-arm-kernel
On 08/29/2014 09:09 AM, Bjorn Andersson wrote:
> On Tue 26 Aug 05:45 PDT 2014, Georgi Djakov wrote:
>
>> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
>> controller inside the APQ8084.
>>
>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
> [...]
>> +Valid values for function are:
>> +adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
>> +blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
>> +blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
>> +blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, blsp_uart1,
>> +blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
>> +blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, blsp_uim1,
>> +blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, blsp_uim8,
>> +blsp_uim9, blsp_uim10, blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
>> +cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
>> +cci_timer2, cci_timer3, cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt,
>> +gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, hdmi_cec,
>> +hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, mdp_vsync,
>> +pci_e0, pci_e0_n, pci_e0_rst, pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n,
>> +pri_mi2s, qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, sd_write,
>> +sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, spdif_tx, spkr_i2s, spkr_i2s_ws,
>> +spss_geni, ter_mi2s, tsif1, tsif2, uim, uim_batt_alarm, gpio
>
> It would be nice if these where indented.
>
> Also, the last binding I sent up was for msm8960, where I got some comments
> that made me change the format completely. I don't require you to follow that
> instead, but I have to vent my opinion saying that it would be nice if you
> did ;)
>
Oh, sorry for missing that and thank you for pointing it out! I will update
and resend.
BR,
Georgi
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2014-08-29 13:10 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-08-26 12:45 [PATCH v2 0/3] pinctrl: qcom: Add APQ8084 pinctrl support Georgi Djakov
2014-08-26 12:45 ` Georgi Djakov
2014-08-26 12:45 ` [PATCH v2 1/3] " Georgi Djakov
2014-08-26 12:45 ` Georgi Djakov
2014-08-27 21:53 ` Andy Gross
2014-08-27 21:53 ` Andy Gross
2014-08-29 5:30 ` Linus Walleij
2014-08-29 5:30 ` Linus Walleij
2014-08-29 5:30 ` Linus Walleij
2014-08-29 6:01 ` Bjorn Andersson
2014-08-29 6:01 ` Bjorn Andersson
2014-08-29 6:01 ` Bjorn Andersson
2014-08-29 13:09 ` Georgi Djakov
2014-08-29 13:09 ` Georgi Djakov
2014-08-29 13:09 ` Georgi Djakov
2014-08-26 12:45 ` [PATCH v2 2/3] dt: Document Qualcomm APQ8084 pinctrl binding Georgi Djakov
2014-08-26 12:45 ` Georgi Djakov
2014-08-27 21:58 ` Andy Gross
2014-08-27 21:58 ` Andy Gross
2014-08-29 6:09 ` Bjorn Andersson
2014-08-29 6:09 ` Bjorn Andersson
2014-08-29 6:09 ` Bjorn Andersson
2014-08-29 13:10 ` Georgi Djakov
2014-08-29 13:10 ` Georgi Djakov
2014-08-29 13:10 ` Georgi Djakov
2014-08-26 12:45 ` [PATCH v2 3/3] ARM: dts: qcom: Add TLMM DT node for APQ8084 Georgi Djakov
2014-08-26 12:45 ` Georgi Djakov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.