* [meta-fsl-arm][PATCH v2 01/15] linux-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
@ 2014-09-02 20:06 ` Lauren Post
2014-09-03 13:19 ` Otavio Salvador
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 02/15] linux-imx-mfgtool: " Lauren Post
` (14 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:06 UTC (permalink / raw)
To: meta-freescale
- Add support for mx6sx.
- General fixes for all mx6.
- Upgrade to v5 Vivante graphics driver.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
.../mx6/defconfig | 16 +++++++++++++---
.../{linux-imx_3.10.17.bb => linux-imx_3.10.31.bb} | 6 +++---
2 files changed, 16 insertions(+), 6 deletions(-)
rename recipes-kernel/linux/{linux-imx-3.10.17 => linux-imx-3.10.31}/mx6/defconfig (96%)
rename recipes-kernel/linux/{linux-imx_3.10.17.bb => linux-imx_3.10.31.bb} (80%)
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/mx6/defconfig b/recipes-kernel/linux/linux-imx-3.10.31/mx6/defconfig
similarity index 96%
rename from recipes-kernel/linux/linux-imx-3.10.17/mx6/defconfig
rename to recipes-kernel/linux/linux-imx-3.10.31/mx6/defconfig
index fa2eada..9f4d52c 100644
--- a/recipes-kernel/linux/linux-imx-3.10.17/mx6/defconfig
+++ b/recipes-kernel/linux/linux-imx-3.10.31/mx6/defconfig
@@ -25,6 +25,7 @@ CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
@@ -59,10 +60,11 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
-CONFIG_NETFILTER=y
CONFIG_VLAN_8021Q=y
+CONFIG_LLC2=y
CONFIG_CAN=y
CONFIG_CAN_FLEXCAN=y
+CONFIG_CAN_M_CAN=y
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
@@ -88,6 +90,8 @@ CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_SPI_NOR_BASE=y
+CONFIG_SPI_FSL_QUADSPI=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
@@ -127,6 +131,7 @@ CONFIG_ATH6KL_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_SNVS_PWRKEY=y
CONFIG_KEYBOARD_IMX=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
@@ -157,6 +162,7 @@ CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MAX732X=y
CONFIG_POWER_SUPPLY=y
CONFIG_SABRESD_MAX8903=y
CONFIG_IMX6_USB_CHARGER=y
@@ -195,6 +201,7 @@ CONFIG_MXC_CAMERA_OV5640=m
CONFIG_MXC_CAMERA_OV5642=m
CONFIG_MXC_CAMERA_OV5640_MIPI=m
CONFIG_MXC_TVIN_ADV7180=m
+CONFIG_MXC_VADC=m
CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
CONFIG_VIDEO_MXC_IPU_OUTPUT=y
CONFIG_VIDEO_MXC_PXP_V4L2=y
@@ -219,6 +226,7 @@ CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
CONFIG_FB_MXC_HDMI=y
CONFIG_FB_MXC_EINK_PANEL=y
CONFIG_FB_MXS_SII902X=y
+CONFIG_FB_MXC_DCIC=m
CONFIG_HANNSTAR_CABC=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -239,18 +247,19 @@ CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_SND_SOC_IMX_HDMI=y
CONFIG_SND_SOC_IMX_SI476X=y
+CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
+CONFIG_USB_G_NCM=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
@@ -280,6 +289,8 @@ CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_VF610_ADC=y
CONFIG_PWM=y
CONFIG_PWM_IMX=y
CONFIG_EXT2_FS=y
@@ -355,4 +366,3 @@ CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
-CONFIG_FHANDLE=y
diff --git a/recipes-kernel/linux/linux-imx_3.10.17.bb b/recipes-kernel/linux/linux-imx_3.10.31.bb
similarity index 80%
rename from recipes-kernel/linux/linux-imx_3.10.17.bb
rename to recipes-kernel/linux/linux-imx_3.10.31.bb
index 9ec3a3e..10ad2f0 100644
--- a/recipes-kernel/linux/linux-imx_3.10.17.bb
+++ b/recipes-kernel/linux/linux-imx_3.10.31.bb
@@ -10,8 +10,8 @@ require recipes-kernel/linux/linux-dtb.inc
DEPENDS += "lzop-native bc-native"
-SRCBRANCH = "imx_3.10.17_1.0.1_ga"
-SRCREV = "dac46dcf913585956a0e7a838e6f4b7465f00f57"
-LOCALVERSION = "-1.0.1_ga"
+SRCBRANCH = "imx_3.10.31_1.1.0_beta"
+SRCREV = "94a7e472c47b800c001c0a5d17bb2f14a13e1980"
+LOCALVERSION = "-1.1.0_beta"
COMPATIBLE_MACHINE = "(mx6)"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 01/15] linux-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 01/15] linux-imx: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
@ 2014-09-03 13:19 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:19 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:06 PM, Lauren Post <lauren.post@freescale.com> wrote:
> - Add support for mx6sx.
> - General fixes for all mx6.
> - Upgrade to v5 Vivante graphics driver.
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
...
> --- a/recipes-kernel/linux/linux-imx-3.10.17/mx6/defconfig
> +++ b/recipes-kernel/linux/linux-imx-3.10.31/mx6/defconfig
...
> @@ -59,10 +60,11 @@ CONFIG_IP_PNP_DHCP=y
> # CONFIG_INET_XFRM_MODE_BEET is not set
> # CONFIG_INET_LRO is not set
> CONFIG_IPV6=y
> -CONFIG_NETFILTER=y
This is a regression from this change, back 2013:
commit 92669a8d0ef193d836c3b15b22b16ab5190a5663
Author: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date: Fri Jan 25 12:30:51 2013 +0100
linux-imx (3.0.35): enable netfilter support
The Netfilter packet filtering framework is useful for so many
use cases that most people will build kernels with it enabled.
So, it could probably make sense to have it enabled by default.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
So please don't disable it. It is a valuable tool for users to have
the kernel with this enabled on the reference boards.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 02/15] linux-imx-mfgtool: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 01/15] linux-imx: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
@ 2014-09-02 20:06 ` Lauren Post
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 03/15] u-boot-imx: Upgrade to 2014.04 version Lauren Post
` (13 subsequent siblings)
15 siblings, 0 replies; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:06 UTC (permalink / raw)
To: meta-freescale
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
.../mx6/defconfig | 5 ++++-
...ool_3.10.17.bb => linux-imx-mfgtool_3.10.31.bb} | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
rename recipes-kernel/linux/{linux-imx-mfgtool-3.10.17 => linux-imx-mfgtool-3.10.31}/mx6/defconfig (98%)
rename recipes-kernel/linux/{linux-imx-mfgtool_3.10.17.bb => linux-imx-mfgtool_3.10.31.bb} (87%)
diff --git a/recipes-kernel/linux/linux-imx-mfgtool-3.10.17/mx6/defconfig b/recipes-kernel/linux/linux-imx-mfgtool-3.10.31/mx6/defconfig
similarity index 98%
rename from recipes-kernel/linux/linux-imx-mfgtool-3.10.17/mx6/defconfig
rename to recipes-kernel/linux/linux-imx-mfgtool-3.10.31/mx6/defconfig
index a4e880b..677eaa0 100644
--- a/recipes-kernel/linux/linux-imx-mfgtool-3.10.17/mx6/defconfig
+++ b/recipes-kernel/linux/linux-imx-mfgtool-3.10.31/mx6/defconfig
@@ -25,6 +25,7 @@ CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
@@ -67,7 +68,7 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=256
+CONFIG_CMA_SIZE_MBYTES=320
CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
@@ -85,6 +86,8 @@ CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_SPI_NOR_BASE=y
+CONFIG_SPI_FSL_QUADSPI=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/recipes-kernel/linux/linux-imx-mfgtool_3.10.17.bb b/recipes-kernel/linux/linux-imx-mfgtool_3.10.31.bb
similarity index 87%
rename from recipes-kernel/linux/linux-imx-mfgtool_3.10.17.bb
rename to recipes-kernel/linux/linux-imx-mfgtool_3.10.31.bb
index 1400973..5a0fb42 100644
--- a/recipes-kernel/linux/linux-imx-mfgtool_3.10.17.bb
+++ b/recipes-kernel/linux/linux-imx-mfgtool_3.10.31.bb
@@ -1,4 +1,6 @@
# Copyright (C) 2014 O.S. Systems Software LTDA.
+# Copyright (C) 2014 Freescale Semiconductor
+
SUMMARY = "Produces a Manufacturing Tool compatible Linux Kernel"
DESCRIPTION = "Linux Kernel provided and supported by Freescale that produces a \
Manufacturing Tool compatible Linux Kernel to be used in updater environment"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 03/15] u-boot-imx: Upgrade to 2014.04 version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 01/15] linux-imx: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 02/15] linux-imx-mfgtool: " Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 04/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-pf200 device tree Lauren Post
` (12 subsequent siblings)
15 siblings, 0 replies; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
- Add mx6sx support
- General fixes for mx6slevk and other mx6
- Support to use zImage
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
...ol_2013.04.bb => u-boot-imx-mfgtool_2014.04.bb} | 0
...u-boot-imx_2013.04.bb => u-boot-imx_2014.04.bb} | 8 ++++----
2 files changed, 4 insertions(+), 4 deletions(-)
rename recipes-bsp/u-boot/{u-boot-imx-mfgtool_2013.04.bb => u-boot-imx-mfgtool_2014.04.bb} (100%)
rename recipes-bsp/u-boot/{u-boot-imx_2013.04.bb => u-boot-imx_2014.04.bb} (61%)
diff --git a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2013.04.bb b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2014.04.bb
similarity index 100%
rename from recipes-bsp/u-boot/u-boot-imx-mfgtool_2013.04.bb
rename to recipes-bsp/u-boot/u-boot-imx-mfgtool_2014.04.bb
diff --git a/recipes-bsp/u-boot/u-boot-imx_2013.04.bb b/recipes-bsp/u-boot/u-boot-imx_2014.04.bb
similarity index 61%
rename from recipes-bsp/u-boot/u-boot-imx_2013.04.bb
rename to recipes-bsp/u-boot/u-boot-imx_2014.04.bb
index 867f0ed..78f2147 100644
--- a/recipes-bsp/u-boot/u-boot-imx_2013.04.bb
+++ b/recipes-bsp/u-boot/u-boot-imx_2014.04.bb
@@ -1,16 +1,16 @@
# Copyright (C) 2013, 2014 Freescale Semiconductor
-DESCRIPTION = "bootloader for imx platforms"
+DESCRIPTION = "Bootloader for i.MX platforms"
require recipes-bsp/u-boot/u-boot.inc
PROVIDES += "u-boot"
LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-SRCBRANCH = "imx_v2013.04_3.10.17_1.0.0_ga"
+SRCBRANCH = "imx_v2014.04_3.10.31_1.1.0_beta"
SRC_URI = "git://git.freescale.com/imx/uboot-imx.git;protocol=git;branch=${SRCBRANCH}"
-SRCREV = "ce0ea2507c492d43bbf88f8609482a171b2d2003"
+SRCREV = "91cbd4d530f240042d112fc4166a143fa659524b"
S = "${WORKDIR}/git"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 04/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-pf200 device tree
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (2 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 03/15] u-boot-imx: Upgrade to 2014.04 version Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:19 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 05/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-enetirq " Lauren Post
` (11 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Add support for pfuze200 on mx6dl-sabresd.
Move pmic device node from imx6qdl-sabresd.dtsi to up-level, and add
another layer on imx6dl-sabresd to diff pfuze100 or pfuze200. Meanwhile
only work in ldo-enable mode if using pfuze200,since 'SW1C' switch
regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
to share the same switch regulator
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
conf/machine/imx6dlsabresd.conf | 1 +
1 file changed, 1 insertion(+)
diff --git a/conf/machine/imx6dlsabresd.conf b/conf/machine/imx6dlsabresd.conf
index 1e934e1..2407dbc 100644
--- a/conf/machine/imx6dlsabresd.conf
+++ b/conf/machine/imx6dlsabresd.conf
@@ -9,6 +9,7 @@ require conf/machine/include/imx6sabresd-common.inc
SOC_FAMILY = "mx6:mx6dl"
KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb"
+KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb"
UBOOT_CONFIG ??= "sd"
UBOOT_CONFIG[sd] = "mx6dlsabresd_config,sdcard"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 04/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-pf200 device tree
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 04/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-pf200 device tree Lauren Post
@ 2014-09-03 13:19 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:19 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Add support for pfuze200 on mx6dl-sabresd.
>
> Move pmic device node from imx6qdl-sabresd.dtsi to up-level, and add
> another layer on imx6dl-sabresd to diff pfuze100 or pfuze200. Meanwhile
> only work in ldo-enable mode if using pfuze200,since 'SW1C' switch
> regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
> to share the same switch regulator
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
> ---
> conf/machine/imx6dlsabresd.conf | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/conf/machine/imx6dlsabresd.conf b/conf/machine/imx6dlsabresd.conf
> index 1e934e1..2407dbc 100644
> --- a/conf/machine/imx6dlsabresd.conf
> +++ b/conf/machine/imx6dlsabresd.conf
> @@ -9,6 +9,7 @@ require conf/machine/include/imx6sabresd-common.inc
> SOC_FAMILY = "mx6:mx6dl"
>
> KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb"
> +KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb"
Please do a line break, as suggested in SL EVK case.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 05/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-enetirq device tree
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (3 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 04/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-pf200 device tree Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:20 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 06/15] imx6qsabresd.conf: Add the imx6q-sabresd-enetirq " Lauren Post
` (10 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Apply ENET IRQ workaround for sabresd board
This is pretty much an example to demonstrate how the GPIO6 workaround
for bug ERR006687 (ENET: Only the ENET wake-up interrupt request can
wake the system from Wait mode) should be applied for a board.
Basically it requires a setup of MX6QDL_PAD_GPIO_6__ENET_IRQ in pinctrl
entry, and an overwrite on the property interrupts-extended to replace
the ENET GIC IRQ with GPIO1_6.
Since the pad GPIO6 is used by I2C3 on the board, we have to create
sabresd-enetirq.dts with I2C3 disabled to enable this workaround.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
conf/machine/imx6dlsabresd.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/imx6dlsabresd.conf b/conf/machine/imx6dlsabresd.conf
index 2407dbc..9d8aff6 100644
--- a/conf/machine/imx6dlsabresd.conf
+++ b/conf/machine/imx6dlsabresd.conf
@@ -9,7 +9,7 @@ require conf/machine/include/imx6sabresd-common.inc
SOC_FAMILY = "mx6:mx6dl"
KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb"
-KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb"
+KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb imx6dl-sabresd-enetirq.dtb"
UBOOT_CONFIG ??= "sd"
UBOOT_CONFIG[sd] = "mx6dlsabresd_config,sdcard"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 05/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-enetirq device tree
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 05/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-enetirq " Lauren Post
@ 2014-09-03 13:20 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:20 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Apply ENET IRQ workaround for sabresd board
>
> This is pretty much an example to demonstrate how the GPIO6 workaround
> for bug ERR006687 (ENET: Only the ENET wake-up interrupt request can
> wake the system from Wait mode) should be applied for a board.
>
> Basically it requires a setup of MX6QDL_PAD_GPIO_6__ENET_IRQ in pinctrl
> entry, and an overwrite on the property interrupts-extended to replace
> the ENET GIC IRQ with GPIO1_6.
>
> Since the pad GPIO6 is used by I2C3 on the board, we have to create
> sabresd-enetirq.dts with I2C3 disabled to enable this workaround.
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
> ---
> conf/machine/imx6dlsabresd.conf | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/conf/machine/imx6dlsabresd.conf b/conf/machine/imx6dlsabresd.conf
> index 2407dbc..9d8aff6 100644
> --- a/conf/machine/imx6dlsabresd.conf
> +++ b/conf/machine/imx6dlsabresd.conf
> @@ -9,7 +9,7 @@ require conf/machine/include/imx6sabresd-common.inc
> SOC_FAMILY = "mx6:mx6dl"
>
> KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb"
> -KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb"
> +KERNEL_DEVICETREE += "imx6dl-sabresd-pf200.dtb imx6dl-sabresd-enetirq.dtb"
Please use the line break style here as suggested in the SL EVK case.
I really liked you splitted this as it give a rich and informative
commit log on the reasoning but please just rework the code style.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 06/15] imx6qsabresd.conf: Add the imx6q-sabresd-enetirq device tree
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (4 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 05/15] imx6dlsabresd.conf: Add the imx6dl-sabresd-enetirq " Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:20 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 07/15] imx6slevk.conf: Add the imx6slevk-pf200 " Lauren Post
` (9 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Apply ENET IRQ workaround for sabresd board
This is pretty much an example to demonstrate how the GPIO6 workaround
for bug ERR006687 (ENET: Only the ENET wake-up interrupt request can
wake the system from Wait mode) should be applied for a board.
Basically it requires a setup of MX6QDL_PAD_GPIO_6__ENET_IRQ in pinctrl
entry, and an overwrite on the property interrupts-extended to replace
the ENET GIC IRQ with GPIO1_6.
Since the pad GPIO6 is used by I2C3 on the board, we have to create
sabresd-enetirq.dts with I2C3 disabled to enable this workaround.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
conf/machine/imx6qsabresd.conf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/conf/machine/imx6qsabresd.conf b/conf/machine/imx6qsabresd.conf
index 4b493b9..7ceaf45 100644
--- a/conf/machine/imx6qsabresd.conf
+++ b/conf/machine/imx6qsabresd.conf
@@ -8,7 +8,7 @@ require conf/machine/include/imx6sabresd-common.inc
SOC_FAMILY = "mx6:mx6q"
-KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb"
+KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb imx6q-sabresd-enetirq.dtb"
UBOOT_CONFIG ??= "sd"
UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 06/15] imx6qsabresd.conf: Add the imx6q-sabresd-enetirq device tree
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 06/15] imx6qsabresd.conf: Add the imx6q-sabresd-enetirq " Lauren Post
@ 2014-09-03 13:20 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:20 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Apply ENET IRQ workaround for sabresd board
>
> This is pretty much an example to demonstrate how the GPIO6 workaround
> for bug ERR006687 (ENET: Only the ENET wake-up interrupt request can
> wake the system from Wait mode) should be applied for a board.
>
> Basically it requires a setup of MX6QDL_PAD_GPIO_6__ENET_IRQ in pinctrl
> entry, and an overwrite on the property interrupts-extended to replace
> the ENET GIC IRQ with GPIO1_6.
>
> Since the pad GPIO6 is used by I2C3 on the board, we have to create
> sabresd-enetirq.dts with I2C3 disabled to enable this workaround.
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
...
> @@ -8,7 +8,7 @@ require conf/machine/include/imx6sabresd-common.inc
>
> SOC_FAMILY = "mx6:mx6q"
>
> -KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb"
> +KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb imx6q-sabresd-enetirq.dtb"
I'd prefer if you break the line after hdcp.dtb DTB file and align the
indent with the first DTB, as suggested on the SL EVK one.
This avoids too long lines on the recipe.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 07/15] imx6slevk.conf: Add the imx6slevk-pf200 device tree
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (5 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 06/15] imx6qsabresd.conf: Add the imx6q-sabresd-enetirq " Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:21 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration Lauren Post
` (8 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Add support for pfuze200 on imx6slevk
Move pmic device node from imx6sl-evk.dtsi to upper-level, and add
another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
to share the same switch regulator
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
conf/machine/imx6slevk.conf | 1 +
1 file changed, 1 insertion(+)
diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
index cffbd0b..9dc0185 100644
--- a/conf/machine/imx6slevk.conf
+++ b/conf/machine/imx6slevk.conf
@@ -10,6 +10,7 @@ include conf/machine/include/tune-cortexa9.inc
SOC_FAMILY = "mx6:mx6sl"
KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb"
+KERNEL_DEVICETREE += "imx6sl-evk-pf200.dtb"
UBOOT_CONFIG ??= "sd"
UBOOT_CONFIG[sd] = "mx6slevk_config,sdcard"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 07/15] imx6slevk.conf: Add the imx6slevk-pf200 device tree
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 07/15] imx6slevk.conf: Add the imx6slevk-pf200 " Lauren Post
@ 2014-09-03 13:21 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:21 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Add support for pfuze200 on imx6slevk
>
> Move pmic device node from imx6sl-evk.dtsi to upper-level, and add
> another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
> only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
> regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
> to share the same switch regulator
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
Minor change but please:
> diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
> index cffbd0b..9dc0185 100644
> --- a/conf/machine/imx6slevk.conf
> +++ b/conf/machine/imx6slevk.conf
> @@ -10,6 +10,7 @@ include conf/machine/include/tune-cortexa9.inc
> SOC_FAMILY = "mx6:mx6sl"
>
> KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb"
> +KERNEL_DEVICETREE += "imx6sl-evk-pf200.dtb"
KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb \
imx6sl-evk-pf200.dtb"
So this avoids two metadata operations and follow other code style
we've been using.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (6 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 07/15] imx6slevk.conf: Add the imx6slevk-pf200 " Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:21 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 09/15] imx-lib: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
` (7 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
conf/machine/imx6sxsabresd.conf | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 conf/machine/imx6sxsabresd.conf
diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
new file mode 100644
index 0000000..91ffe15
--- /dev/null
+++ b/conf/machine/imx6sxsabresd.conf
@@ -0,0 +1,21 @@
+#@TYPE: Machine
+#@NAME: Freescale i.MX6SoloX SabreSD
+#@SOC: i.MX6SX
+#@DESCRIPTION: Machine configuration for Freescale i.MX6SoloX Sabre SD
+#@MAINTAINER: Lauren Post <Lauren.Post@freescalecom>
+
+require conf/machine/include/imx6sabresd-common.inc
+
+SOC_FAMILY = "mx6:mx6sx"
+
+KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb"
+KERNEL_DEVICETREE += "imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb imx6sx-sdb-canfd.dtb"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd] = "mx6sxsabresd_config,sdcard"
+UBOOT_CONFIG[emmc] = "mx6sxsabresd_emmc_config,sdcard"
+UBOOT_CONFIG[qspi2] = "mx6sxsabresd_qspi2_config"
+UBOOT_CONFIG[m4fastup] = "mx6sxsabresd_m4fastup_config"
+UBOOT_CONFIG[mfgtool] = "mx6sxsabresd_config"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration Lauren Post
@ 2014-09-03 13:21 ` Otavio Salvador
2014-09-03 13:33 ` Daiane Angolini
0 siblings, 1 reply; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:21 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
> ---
> conf/machine/imx6sxsabresd.conf | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 conf/machine/imx6sxsabresd.conf
>
> diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
> new file mode 100644
> index 0000000..91ffe15
> --- /dev/null
> +++ b/conf/machine/imx6sxsabresd.conf
> @@ -0,0 +1,21 @@
> +#@TYPE: Machine
> +#@NAME: Freescale i.MX6SoloX SabreSD
> +#@SOC: i.MX6SX
> +#@DESCRIPTION: Machine configuration for Freescale i.MX6SoloX Sabre SD
> +#@MAINTAINER: Lauren Post <Lauren.Post@freescalecom>
> +
> +require conf/machine/include/imx6sabresd-common.inc
> +
> +SOC_FAMILY = "mx6:mx6sx"
> +
> +KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb"
> +KERNEL_DEVICETREE += "imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb imx6sx-sdb-canfd.dtb"
Please use line break as suggested in SL EVK case.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration
2014-09-03 13:21 ` Otavio Salvador
@ 2014-09-03 13:33 ` Daiane Angolini
0 siblings, 0 replies; 30+ messages in thread
From: Daiane Angolini @ 2014-09-03 13:33 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
On Wed, Sep 3, 2014 at 10:21 AM, Otavio Salvador
<otavio@ossystems.com.br> wrote:
> Hello Lauren,
>
> On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
>> Signed-off-by: Lauren Post <lauren.post@freescale.com>
>> ---
>> conf/machine/imx6sxsabresd.conf | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>> create mode 100644 conf/machine/imx6sxsabresd.conf
>>
>> diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
>> new file mode 100644
>> index 0000000..91ffe15
>> --- /dev/null
>> +++ b/conf/machine/imx6sxsabresd.conf
>> @@ -0,0 +1,21 @@
>> +#@TYPE: Machine
>> +#@NAME: Freescale i.MX6SoloX SabreSD
>> +#@SOC: i.MX6SX
>> +#@DESCRIPTION: Machine configuration for Freescale i.MX6SoloX Sabre SD
>> +#@MAINTAINER: Lauren Post <Lauren.Post@freescalecom>
<Lauren.Post@freescale.com>
please, remember to add the dot when you create v3
Daiane
>> +
>> +require conf/machine/include/imx6sabresd-common.inc
>> +
>> +SOC_FAMILY = "mx6:mx6sx"
>> +
>> +KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb"
>> +KERNEL_DEVICETREE += "imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb imx6sx-sdb-canfd.dtb"
>
> Please use line break as suggested in SL EVK case.
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 09/15] imx-lib: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (7 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 08/15] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 10/15] imx-lib: Add PLATFORM setting for mx6sx and mx6sl Lauren Post
` (6 subsequent siblings)
15 siblings, 0 replies; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Makefiles changed for mx6sx and mx6sl to exclude rng and sahara
since those are not supported on mx6 chips.
Platform is set to MX6S for both mx6sx and mx6sl so the
previous makefiles only excluded MX6Q platform.
Note this is different for imx-test which specifies
MX6SX and MX6SL in makefiles. In imx-lib they are treated the same.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
recipes-bsp/imx-lib/imx-lib_3.10.31-1.1.0.bb | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 recipes-bsp/imx-lib/imx-lib_3.10.31-1.1.0.bb
diff --git a/recipes-bsp/imx-lib/imx-lib_3.10.31-1.1.0.bb b/recipes-bsp/imx-lib/imx-lib_3.10.31-1.1.0.bb
new file mode 100644
index 0000000..9eeda3f
--- /dev/null
+++ b/recipes-bsp/imx-lib/imx-lib_3.10.31-1.1.0.bb
@@ -0,0 +1,15 @@
+# Copyright (C) 2013, 2014 Freescale Semiconductor
+
+include imx-lib.inc
+
+# FIXME: Drop 'beta' suffix for GA release
+SRC_URI = "${FSL_MIRROR}/${PN}-${PV}-beta.tar.gz"
+
+S="${WORKDIR}/${PN}-${PV}-beta"
+
+PE = "1"
+
+SRC_URI[md5sum] = "0485e457eafe5a10274d171b3af79e2f"
+SRC_URI[sha256sum] = "011eb34c6fd1b1ea9894bbe07a539c1aeee1500bc8fdd29d8ce1dc1d02f79e24"
+
+COMPATIBLE_MACHINE = "(mx6)"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 10/15] imx-lib: Add PLATFORM setting for mx6sx and mx6sl
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (8 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 09/15] imx-lib: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:22 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 11/15] imx-vpu: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
` (5 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
imx-lib has pxp libraries only used for mx6sx and mx6sl
Previously used MX6Q but mx6q and mx6dl can't be built with pxp
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
recipes-bsp/imx-lib/imx-lib.inc | 2 ++
1 file changed, 2 insertions(+)
diff --git a/recipes-bsp/imx-lib/imx-lib.inc b/recipes-bsp/imx-lib/imx-lib.inc
index 243eb88..314e153 100644
--- a/recipes-bsp/imx-lib/imx-lib.inc
+++ b/recipes-bsp/imx-lib/imx-lib.inc
@@ -9,6 +9,8 @@ LIC_FILES_CHKSUM = "file://ipu/mxc_ipu_hl_lib.h;endline=13;md5=6c7486b21a8524b18
PLATFORM_mx6 = "IMX6Q"
PLATFORM_mx5 = "IMX51"
+PLATFORM_mx6sl = "IMX6S"
+PLATFORM_mx6sx = "IMX6S"
PARALLEL_MAKE="-j 1"
EXTRA_OEMAKE = ""
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 11/15] imx-vpu: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (9 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 10/15] imx-lib: Add PLATFORM setting for mx6sx and mx6sl Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 12/15] imx-test: Update include PLATFORM and DEPEND for mx6sx and mx6sl Lauren Post
` (4 subsequent siblings)
15 siblings, 0 replies; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
- Fixes to support multiple thread robustness
- SOF stuffing new command added used for MJPEG
- VPU performance fixes with multiple instances
- IOGetVirtMem - return checking - Remove patch from recipe
- SOI search performance fixes
- Comment unused registers for mx6 chips as dummy
- Add new registers used on mx6 chips only.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
...etVirtMem-returns-1-MAP_FAILED-on-failure.patch | 83 --------------------
recipes-bsp/imx-vpu/imx-vpu_3.10.17-1.0.0.bb | 12 ---
recipes-bsp/imx-vpu/imx-vpu_3.10.31-1.1.0.bb | 14 ++++
3 files changed, 14 insertions(+), 95 deletions(-)
delete mode 100644 recipes-bsp/imx-vpu/imx-vpu/0001-IOGetVirtMem-returns-1-MAP_FAILED-on-failure.patch
delete mode 100644 recipes-bsp/imx-vpu/imx-vpu_3.10.17-1.0.0.bb
create mode 100644 recipes-bsp/imx-vpu/imx-vpu_3.10.31-1.1.0.bb
diff --git a/recipes-bsp/imx-vpu/imx-vpu/0001-IOGetVirtMem-returns-1-MAP_FAILED-on-failure.patch b/recipes-bsp/imx-vpu/imx-vpu/0001-IOGetVirtMem-returns-1-MAP_FAILED-on-failure.patch
deleted file mode 100644
index 348a536..0000000
--- a/recipes-bsp/imx-vpu/imx-vpu/0001-IOGetVirtMem-returns-1-MAP_FAILED-on-failure.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 3f3e374391ddc5e605f604e5bcdf95e29b1bcc39 Mon Sep 17 00:00:00 2001
-From: Eric Nelson <eric.nelson@boundarydevices.com>
-Date: Fri, 20 Jun 2014 19:42:38 -0700
-Subject: [PATCH] IOGetVirtMem returns -1 (MAP_FAILED) on failure
-
-Upstream-Status: Pending
-
-Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
----
- vpu/vpu_io.c | 2 +-
- vpu/vpu_io.h | 2 ++
- vpu/vpu_lib.c | 8 ++++----
- 3 files changed, 7 insertions(+), 5 deletions(-)
-
-diff --git a/vpu/vpu_io.c b/vpu/vpu_io.c
-index 8cbb571..14759da 100644
---- a/vpu/vpu_io.c
-+++ b/vpu/vpu_io.c
-@@ -265,7 +265,7 @@ int IOSystemInit(void *callback)
- goto err;
- }
-
-- if (IOGetVirtMem(&bit_work_addr) <= 0)
-+ if (IOGetVirtMem(&bit_work_addr) == -1)
- goto err;
- #endif
- UnlockVpu(vpu_semap);
-diff --git a/vpu/vpu_io.h b/vpu/vpu_io.h
-index 392e04a..1e6340d 100644
---- a/vpu/vpu_io.h
-+++ b/vpu/vpu_io.h
-@@ -64,6 +64,8 @@ int IOSystemInit(void *callback);
- int IOSystemShutdown(void);
- int IOGetPhyMem(vpu_mem_desc * buff);
- int IOFreePhyMem(vpu_mem_desc * buff);
-+
-+/* returns -1 ((int)MAP_FAILED) on failure */
- int IOGetVirtMem(vpu_mem_desc * buff);
- int IOFreeVirtMem(vpu_mem_desc * buff);
- int IOGetVShareMem(int size);
-diff --git a/vpu/vpu_lib.c b/vpu/vpu_lib.c
-index 1fb731b..7a7f42d 100644
---- a/vpu/vpu_lib.c
-+++ b/vpu/vpu_lib.c
-@@ -1764,7 +1764,7 @@ RetCode vpu_EncStartOneFrame(EncHandle handle, EncParam * param)
- err_msg("Unable to obtain physical mem\n");
- return RETCODE_FAILURE;
- }
-- if (IOGetVirtMem(&pEncInfo->picParaBaseMem) <= 0) {
-+ if (IOGetVirtMem(&pEncInfo->picParaBaseMem) == -1) {
- IOFreePhyMem(&pEncInfo->picParaBaseMem);
- pEncInfo->picParaBaseMem.phy_addr = 0;
- err_msg("Unable to obtain virtual mem\n");
-@@ -2982,7 +2982,7 @@ RetCode vpu_DecGetInitialInfo(DecHandle handle, DecInitialInfo * info)
- UnlockVpu(vpu_semap);
- return RETCODE_FAILURE;
- }
-- if (IOGetVirtMem(&pDecInfo->userDataBufMem) <= 0) {
-+ if (IOGetVirtMem(&pDecInfo->userDataBufMem) == -1) {
- IOFreePhyMem(&pDecInfo->userDataBufMem);
- pDecInfo->userDataBufMem.phy_addr = 0;
- err_msg("Unable to obtain virtual mem\n");
-@@ -4017,7 +4017,7 @@ RetCode vpu_DecStartOneFrame(DecHandle handle, DecParam * param)
- UnlockVpu(vpu_semap);
- return RETCODE_FAILURE;
- }
-- if (IOGetVirtMem(&pDecInfo->picParaBaseMem) <= 0) {
-+ if (IOGetVirtMem(&pDecInfo->picParaBaseMem) == -1) {
- IOFreePhyMem(&pDecInfo->picParaBaseMem);
- pDecInfo->picParaBaseMem.phy_addr = 0;
- err_msg("Unable to obtain virtual mem\n");
-@@ -4057,7 +4057,7 @@ RetCode vpu_DecStartOneFrame(DecHandle handle, DecParam * param)
- UnlockVpu(vpu_semap);
- return RETCODE_FAILURE;
- }
-- if (IOGetVirtMem(&pDecInfo->userDataBufMem) <= 0) {
-+ if (IOGetVirtMem(&pDecInfo->userDataBufMem) == -1) {
- IOFreePhyMem(&pDecInfo->userDataBufMem);
- pDecInfo->userDataBufMem.phy_addr = 0;
- err_msg("Unable to obtain virtual mem\n");
---
-1.9.1
-
diff --git a/recipes-bsp/imx-vpu/imx-vpu_3.10.17-1.0.0.bb b/recipes-bsp/imx-vpu/imx-vpu_3.10.17-1.0.0.bb
deleted file mode 100644
index 7ed9590..0000000
--- a/recipes-bsp/imx-vpu/imx-vpu_3.10.17-1.0.0.bb
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (C) 2013, 2014 Freescale Semiconductor
-
-require imx-vpu.inc
-
-PE = "1"
-
-SRC_URI[md5sum] = "71ea1b803864101ebf88a1bab45514d2"
-SRC_URI[sha256sum] = "cd8a7bd50ff3274db76a331cc6622d3ba4bb7c790ce778f303e49187df2dfd72"
-
-SRC_URI_append = " file://0001-IOGetVirtMem-returns-1-MAP_FAILED-on-failure.patch"
-
-COMPATIBLE_MACHINE = "(mx6)"
diff --git a/recipes-bsp/imx-vpu/imx-vpu_3.10.31-1.1.0.bb b/recipes-bsp/imx-vpu/imx-vpu_3.10.31-1.1.0.bb
new file mode 100644
index 0000000..f6dfb02
--- /dev/null
+++ b/recipes-bsp/imx-vpu/imx-vpu_3.10.31-1.1.0.bb
@@ -0,0 +1,14 @@
+# Copyright (C) 2013, 2014 Freescale Semiconductor
+
+require imx-vpu.inc
+
+PE = "1"
+
+# FIXME: Drop 'beta' suffix for GA release
+SRC_URI = "${FSL_MIRROR}/${PN}-${PV}-beta.bin;fsl-eula=true"
+S = "${WORKDIR}/${PN}-${PV}-beta"
+
+SRC_URI[md5sum] = "ab76e7395b6a178a8538a6d5beb87656"
+SRC_URI[sha256sum] = "22d0542bd4d7beb88084575c834bf9045c8e2acc43acdd2ec4e0e5534b4b9c5e"
+
+COMPATIBLE_MACHINE = "(mx6)"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 12/15] imx-test: Update include PLATFORM and DEPEND for mx6sx and mx6sl
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (10 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 11/15] imx-vpu: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:23 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 13/15] imx-test: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
` (3 subsequent siblings)
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
Add mx6sx depends similar to mx6sl. mx6sx has no VPU like mx6sl.
Update PLATFORM to be specific to mx6sx and mx6sl which both support
PXP but only mx6sx supports mxc_mcc_tty_test tests
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
recipes-bsp/imx-test/imx-test.inc | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/recipes-bsp/imx-test/imx-test.inc b/recipes-bsp/imx-test/imx-test.inc
index 94dbdc3..c96fbef 100644
--- a/recipes-bsp/imx-test/imx-test.inc
+++ b/recipes-bsp/imx-test/imx-test.inc
@@ -5,6 +5,7 @@ DEPENDS_mx5 = "virtual/kernel imx-lib imx-vpu"
DEPENDS_mx6q = "virtual/kernel imx-lib imx-vpu"
DEPENDS_mx6dl = "virtual/kernel imx-lib imx-vpu"
DEPENDS_mx6sl = "virtual/kernel imx-lib"
+DEPENDS_mx6sx = "virtual/kernel imx-lib"
DEPENDS_mxs = "virtual/kernel"
LICENSE = "GPLv2"
@@ -13,7 +14,8 @@ LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=80
PE = "1"
PLATFORM_mx6 = "IMX6Q"
-PLATFORM_mx6sl = "IMX6S"
+PLATFORM_mx6sl = "IMX6SL"
+PLATFORM_mx6sx = "IMX6SX"
PLATFORM_mx53 = "IMX53"
PLATFORM_mx51 = "IMX51"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 13/15] imx-test: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (11 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 12/15] imx-test: Update include PLATFORM and DEPEND for mx6sx and mx6sl Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 14/15] firmware-imx: " Lauren Post
` (2 subsequent siblings)
15 siblings, 0 replies; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
- Fixes to csi_v4l2 test
- Add dcic driver test case
- Add mxc_mcc_tty_test case used for mx6sx
- Fixes for VPU test for IOGetVirtMem Checking and SOF stuffing
- Updates to mxc_v4l2 to use csi_v4l2 tests
- Update HAB to use zImage
- Add MX6SX for mx6sx
- Change MX6S to MX6SL for mx6sl
- Update USB documentation
- Add cxi_v4l2_tvin test case for vadc
- sdma - Support M2D dma copy for 3.10.17
- mmdc - Add mx6sx support
- wdog - Add dbg monitor
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
..._3.10.17-1.0.0.bb => imx-test_3.10.31-1.1.0.bb} | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
rename recipes-bsp/imx-test/{imx-test_3.10.17-1.0.0.bb => imx-test_3.10.31-1.1.0.bb} (54%)
diff --git a/recipes-bsp/imx-test/imx-test_3.10.17-1.0.0.bb b/recipes-bsp/imx-test/imx-test_3.10.31-1.1.0.bb
similarity index 54%
rename from recipes-bsp/imx-test/imx-test_3.10.17-1.0.0.bb
rename to recipes-bsp/imx-test/imx-test_3.10.31-1.1.0.bb
index 77b51c7..2d29eb7 100644
--- a/recipes-bsp/imx-test/imx-test_3.10.17-1.0.0.bb
+++ b/recipes-bsp/imx-test/imx-test_3.10.31-1.1.0.bb
@@ -2,12 +2,16 @@
include imx-test.inc
+# FIXME: Drop 'beta' suffix for GA release
+SRC_URI = "${FSL_MIRROR}/${PN}-${PV}-beta.tar.gz"
+S="${WORKDIR}/${PN}-${PV}-beta"
+
SRC_URI_append_mx5 = " file://revert_epdc_hdr_change.patch \
file://clocks.sh"
SRC_URI_append_mxs = " file://revert_epdc_hdr_change.patch \
file://clocks.sh"
-SRC_URI[md5sum] = "3e066a84878b93ee52e54a040a7b2b61"
-SRC_URI[sha256sum] = "21bedcbd707e392d8558ec5a73095ca15b4c95ab66deabb06876aaf3f8dac2c4"
+SRC_URI[md5sum] = "6170af41652f1f213d1a86340e103797"
+SRC_URI[sha256sum] = "6aa33ef21932ca0349dbda05b6b151d5d705663180abc5f860670293251aef54"
COMPATIBLE_MACHINE = "(mxs|mx5|mx6)"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* [meta-fsl-arm][PATCH v2 14/15] firmware-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (12 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 13/15] imx-test: Upgrade to 3.10.31-1.1.0 Beta version Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:24 ` Otavio Salvador
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 15/15] u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernel Lauren Post
2014-09-03 13:26 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Otavio Salvador
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
This release does not contain Atheros firmware so remove from include
VPU firmware is updated to version v3.1.1_r46060
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
recipes-bsp/firmware-imx/firmware-imx.inc | 7 +------
.../firmware-imx/firmware-imx_3.10.17-1.0.0.bb | 10 ----------
.../firmware-imx/firmware-imx_3.10.31-1.1.0.bb | 14 ++++++++++++++
3 files changed, 15 insertions(+), 16 deletions(-)
delete mode 100644 recipes-bsp/firmware-imx/firmware-imx_3.10.17-1.0.0.bb
create mode 100644 recipes-bsp/firmware-imx/firmware-imx_3.10.31-1.1.0.bb
diff --git a/recipes-bsp/firmware-imx/firmware-imx.inc b/recipes-bsp/firmware-imx/firmware-imx.inc
index 0f49937..96ff1b0 100644
--- a/recipes-bsp/firmware-imx/firmware-imx.inc
+++ b/recipes-bsp/firmware-imx/firmware-imx.inc
@@ -11,17 +11,12 @@ SRC_URI = "${FSL_MIRROR}/firmware-imx-${PV}.bin;fsl-eula=true"
inherit fsl-eula-unpack
do_install() {
- install -d ${D}/lib/firmware
+ install -d ${D}/lib/firmware
cp -rfv firmware/* ${D}/lib/firmware/
find ${D}/lib/firmware -type f -exec chmod 644 '{}' ';'
# Remove files not going to be installed
find ${D}/lib/firmware/ -name Android.mk -exec rm '{}' ';'
- rm ${D}/lib/firmware/LICENCE.atheros_firmware \
- ${D}/lib/firmware/README
-
- # FIXME: Remove firmware packaged in linux-firmware
- rm -r ${D}/lib/firmware/ath6k ${D}/lib/firmware/ar3k
}
python populate_packages_prepend() {
diff --git a/recipes-bsp/firmware-imx/firmware-imx_3.10.17-1.0.0.bb b/recipes-bsp/firmware-imx/firmware-imx_3.10.17-1.0.0.bb
deleted file mode 100644
index 0e95d02..0000000
--- a/recipes-bsp/firmware-imx/firmware-imx_3.10.17-1.0.0.bb
+++ /dev/null
@@ -1,10 +0,0 @@
-# Copyright (C) 2012-2014 Freescale Semiconductor
-
-require recipes-bsp/firmware-imx/firmware-imx.inc
-
-PE="1"
-
-SRC_URI[md5sum] = "29a54f6e5bf889a00cd8ca85080af223"
-SRC_URI[sha256sum] = "768d857dfc1bec344fbd95665e450030d5a0d541a695027f6d7815e0309bea37"
-
-COMPATIBLE_MACHINE = "(mx6)"
diff --git a/recipes-bsp/firmware-imx/firmware-imx_3.10.31-1.1.0.bb b/recipes-bsp/firmware-imx/firmware-imx_3.10.31-1.1.0.bb
new file mode 100644
index 0000000..b5722e8
--- /dev/null
+++ b/recipes-bsp/firmware-imx/firmware-imx_3.10.31-1.1.0.bb
@@ -0,0 +1,14 @@
+# Copyright (C) 2012-2014 Freescale Semiconductor
+
+require firmware-imx.inc
+
+PE="1"
+
+SRC_URI = "${FSL_MIRROR}/firmware-imx-${PV}-beta.bin;fsl-eula=true"
+
+S = "${WORKDIR}/firmware-imx-${PV}-beta"
+
+SRC_URI[md5sum] = "4e102affc4273f424da4cec9f46adae8"
+SRC_URI[sha256sum] = "8fcfc713321c4ffaafee248feb392b7bc9b913b7abee5020fceaca1d1a49ac99"
+
+COMPATIBLE_MACHINE = "(mx6)"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 14/15] firmware-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 14/15] firmware-imx: " Lauren Post
@ 2014-09-03 13:24 ` Otavio Salvador
2014-09-03 13:29 ` Lauren Post
0 siblings, 1 reply; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:24 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> This release does not contain Atheros firmware so remove from include
>
> VPU firmware is updated to version v3.1.1_r46060
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
The atheros firmware has been removed from this release, and this is
great. However we still have 3.0.35-4.0.0[1] which is around for use
with MX5.
1. http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-arm/tree/recipes-bsp/firmware-imx/firmware-imx_3.0.35-4.0.0.bb
So I think it is better to keep the removal in the .inc until we move
all to a single firmware-imx package.
If you can confirm that this release is compatible with the MX5 SoCs
we can drop 3.0.35.4.0.0 one and clean this up.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [meta-fsl-arm][PATCH v2 14/15] firmware-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-03 13:24 ` Otavio Salvador
@ 2014-09-03 13:29 ` Lauren Post
2014-09-03 13:35 ` Otavio Salvador
0 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-03 13:29 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
We did not remove the firmware required for mx5 only the atheros.
Our understanding is that all boards were using community atheros anyways which is the same firmware.
We test with mx53 when we do our legacy builds and Daiane tested it for us on mx53 and mx28 so firmware and multimedia should work on both.
Lauren
-----Original Message-----
From: otavio.salvador@gmail.com [mailto:otavio.salvador@gmail.com] On Behalf Of Otavio Salvador
Sent: Wednesday, September 03, 2014 8:25 AM
To: Post Lauren-RAA013
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v2 14/15] firmware-imx: Upgrade to 3.10.31-1.1.0 Beta version
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> This release does not contain Atheros firmware so remove from include
>
> VPU firmware is updated to version v3.1.1_r46060
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
The atheros firmware has been removed from this release, and this is great. However we still have 3.0.35-4.0.0[1] which is around for use with MX5.
1. http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-arm/tree/recipes-bsp/firmware-imx/firmware-imx_3.0.35-4.0.0.bb
So I think it is better to keep the removal in the .inc until we move all to a single firmware-imx package.
If you can confirm that this release is compatible with the MX5 SoCs we can drop 3.0.35.4.0.0 one and clean this up.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [meta-fsl-arm][PATCH v2 14/15] firmware-imx: Upgrade to 3.10.31-1.1.0 Beta version
2014-09-03 13:29 ` Lauren Post
@ 2014-09-03 13:35 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:35 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
On Wed, Sep 3, 2014 at 10:29 AM, Lauren Post <Lauren.Post@freescale.com> wrote:
> We did not remove the firmware required for mx5 only the atheros.
> Our understanding is that all boards were using community atheros anyways which is the same firmware.
>
> We test with mx53 when we do our legacy builds and Daiane tested it for us on mx53 and mx28 so firmware and multimedia should work on both.
However the atheros removal is dropped from the .inc so when building
mx53qsb for example, you'll have these there again.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* [meta-fsl-arm][PATCH v2 15/15] u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernel
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (13 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 14/15] firmware-imx: " Lauren Post
@ 2014-09-02 20:07 ` Lauren Post
2014-09-03 13:25 ` Otavio Salvador
2014-09-03 13:26 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Otavio Salvador
15 siblings, 1 reply; 30+ messages in thread
From: Lauren Post @ 2014-09-02 20:07 UTC (permalink / raw)
To: meta-freescale
3.10.31 linux-imx has update to work with fixed mmc blocks
Without this patch the community u-boot will not boot on some
mx6 boards.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
...-mmcroot-to-use-fixed-mmc-block-index-for.patch | 91 ++++++++++++++++++++
recipes-bsp/u-boot/u-boot-fslc_2014.07.bb | 3 +
2 files changed, 94 insertions(+)
create mode 100644 recipes-bsp/u-boot/u-boot-fslc/iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch
diff --git a/recipes-bsp/u-boot/u-boot-fslc/iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch b/recipes-bsp/u-boot/u-boot-fslc/iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch
new file mode 100644
index 0000000..6080671
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-fslc/iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch
@@ -0,0 +1,91 @@
+From 42e39ad63e8108d7944caf3bc6268070ac40e202 Mon Sep 17 00:00:00 2001
+From: "Ye.Li" <Ye.Li@freescale.com>
+Date: Mon, 1 Sep 2014 10:33:47 +0800
+Subject: [PATCH] iMX6: Change mmcroot to use fixed mmc block index for USDHC
+
+Kernel changed to use fixed mmcblk index for USDHC, which is
+mmcblk0 --> USDHC1
+mmcblk1 --> USDHC2
+mmcblk2 --> USDHC3
+mmcblk3 --> USDHC4
+Thus, change the default mmcroot in u-boot to fit the changes in kernel.
+
+Signed-off-by: Ye.Li <Ye.Li@freescale.com>
+---
+ include/configs/mx6qarm2.h | 4 ++--
+ include/configs/mx6qsabreauto.h | 2 +-
+ include/configs/mx6sabresd.h | 2 +-
+ include/configs/mx6slevk.h | 2 +-
+ include/configs/mx6sxsabresd.h | 2 +-
+ 5 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
+index fd651cf..8bc2124 100644
+--- a/include/configs/mx6qarm2.h
++++ b/include/configs/mx6qarm2.h
+@@ -77,8 +77,8 @@
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "mmcdev=1\0" \
+- "mmcpart=2\0" \
+- "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
++ "mmcpart=1\0" \
++ "mmcroot=/dev/mmcblk3p2 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
+index d1639c4..bdfbbc7 100644
+--- a/include/configs/mx6qsabreauto.h
++++ b/include/configs/mx6qsabreauto.h
+@@ -17,7 +17,7 @@
+ #elif defined CONFIG_MX6DL
+ #define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabreauto.dtb"
+ #endif
+-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
++#define CONFIG_MMCROOT "/dev/mmcblk2p2"
+ #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
+
+ /* USB Configs */
+diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
+index c5b9c4b..c563533 100644
+--- a/include/configs/mx6sabresd.h
++++ b/include/configs/mx6sabresd.h
+@@ -15,7 +15,7 @@
+ #define CONFIG_MACH_TYPE 3980
+ #define CONFIG_MXC_UART_BASE UART1_BASE
+ #define CONFIG_CONSOLE_DEV "ttymxc0"
+-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
++#define CONFIG_MMCROOT "/dev/mmcblk2p2"
+ #if defined(CONFIG_MX6Q)
+ #define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd-ldo.dtb"
+ #elif defined(CONFIG_MX6DL)
+diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
+index 8e3cc02..66d6d04 100644
+--- a/include/configs/mx6slevk.h
++++ b/include/configs/mx6slevk.h
+@@ -87,7 +87,7 @@
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
++ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
+index 1eda65e..f0fd01a 100644
+--- a/include/configs/mx6sxsabresd.h
++++ b/include/configs/mx6sxsabresd.h
+@@ -61,7 +61,7 @@
+ "ip_dyn=yes\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
++ "mmcroot=/dev/mmcblk3p2 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+--
+1.7.9.5
+
diff --git a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
index b219161..3a95661 100644
--- a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
@@ -4,3 +4,6 @@ PV = "v2014.07"
SRCREV = "a824e891767f8bd15edf54013e23639a3228dc24"
SRCBRANCH = "patches-2014.07"
+
+#fix to integrate to use with 3.10.31 kernel
+SRC_URI_append_mx6 = " file://iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [meta-fsl-arm][PATCH v2 15/15] u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernel
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 15/15] u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernel Lauren Post
@ 2014-09-03 13:25 ` Otavio Salvador
0 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:25 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:07 PM, Lauren Post <lauren.post@freescale.com> wrote:
> 3.10.31 linux-imx has update to work with fixed mmc blocks
> Without this patch the community u-boot will not boot on some
> mx6 boards.
>
> Signed-off-by: Lauren Post <lauren.post@freescale.com>
...
> +++ b/recipes-bsp/u-boot/u-boot-fslc/iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch
> @@ -0,0 +1,91 @@
> +From 42e39ad63e8108d7944caf3bc6268070ac40e202 Mon Sep 17 00:00:00 2001
> +From: "Ye.Li" <Ye.Li@freescale.com>
> +Date: Mon, 1 Sep 2014 10:33:47 +0800
> +Subject: [PATCH] iMX6: Change mmcroot to use fixed mmc block index for USDHC
> +
> +Kernel changed to use fixed mmcblk index for USDHC, which is
> +mmcblk0 --> USDHC1
> +mmcblk1 --> USDHC2
> +mmcblk2 --> USDHC3
> +mmcblk3 --> USDHC4
> +Thus, change the default mmcroot in u-boot to fit the changes in kernel.
> +
> +Signed-off-by: Ye.Li <Ye.Li@freescale.com>
The patch is lacking the:
Upstream-Status: Pending
...
> diff --git a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
> index b219161..3a95661 100644
> --- a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
> +++ b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
> @@ -4,3 +4,6 @@ PV = "v2014.07"
>
> SRCREV = "a824e891767f8bd15edf54013e23639a3228dc24"
> SRCBRANCH = "patches-2014.07"
> +
> +#fix to integrate to use with 3.10.31 kernel
> +SRC_URI_append_mx6 = " file://iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch"
Please drop the comment line and as U-Boot builds individual boards
you can use SRC_URI += and avoid the _append uglyness :-)
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta
2014-09-02 20:06 ` [meta-fsl-arm][PATCH v2 00/15] Update to 3.10.31-1.1.0 Beta Lauren Post
` (14 preceding siblings ...)
2014-09-02 20:07 ` [meta-fsl-arm][PATCH v2 15/15] u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernel Lauren Post
@ 2014-09-03 13:26 ` Otavio Salvador
15 siblings, 0 replies; 30+ messages in thread
From: Otavio Salvador @ 2014-09-03 13:26 UTC (permalink / raw)
To: Lauren Post; +Cc: meta-freescale
Hello Lauren,
On Tue, Sep 2, 2014 at 5:06 PM, Lauren Post <lauren.post@freescale.com> wrote:
> Changes from v1 patchset
> - Reorder the patches so u-boot is before the machine files
> - Remove 3.10.17 kernel recipes
> - Change commit log fo slevk pfuse
> - Add u-boot-fslc patch to work with fixed mmc
Great summary.
I included some comments in patches but the issues are mainly minor. I
think we're very close to a ready patchset.
Thanks for reworking these things. I will add this serie on the
autobuilder for testing.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 30+ messages in thread