From: Carlo Caione <carlo@caione.org> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux@arm.linux.org.uk, robh+dt@kernel.org, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, daniel.lezcano@linaro.org, tglx@linutronix.de, gregkh@linuxfoundation.org, jslaby@suse.cz, grant.likely@linaro.org, b.galvani@gmail.com, maxime.ripard@free-electrons.com, afaerber@suse.de, matthias.bgg@gmail.com Cc: Carlo Caione <carlo@caione.org> Subject: [PATCH v2 8/9] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Date: Thu, 11 Sep 2014 22:11:39 +0200 [thread overview] Message-ID: <1410466300-19168-9-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1410466300-19168-1-git-send-email-carlo@caione.org> The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex A9 and an ARM Mali-400 GPU. This patch adds two basic DTSI for the preliminary support of Meson and Meson6 SoCs. Another DTS is also added for supporting the atv1200 board, produced by Geniatech inc. Signed-off-by: Carlo Caione <carlo@caione.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/meson.dtsi | 74 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/meson6-atv1200.dts | 25 ++++++++++++ arch/arm/boot/dts/meson6.dtsi | 40 +++++++++++++++++++ 4 files changed, 140 insertions(+) create mode 100644 arch/arm/boot/dts/meson.dtsi create mode 100644 arch/arm/boot/dts/meson6-atv1200.dts create mode 100644 arch/arm/boot/dts/meson6.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index adb5ed9..4e2bb17 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -154,6 +154,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 0000000..ace5db8 --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + serial2 = &uart_B; + serial3 = &uart_C; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial@c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial@c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial@c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 0000000..84576aa --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 0000000..f9d2cb5 --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi @@ -0,0 +1,40 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */ -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: carlo@caione.org (Carlo Caione) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 8/9] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Date: Thu, 11 Sep 2014 22:11:39 +0200 [thread overview] Message-ID: <1410466300-19168-9-git-send-email-carlo@caione.org> (raw) In-Reply-To: <1410466300-19168-1-git-send-email-carlo@caione.org> The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex A9 and an ARM Mali-400 GPU. This patch adds two basic DTSI for the preliminary support of Meson and Meson6 SoCs. Another DTS is also added for supporting the atv1200 board, produced by Geniatech inc. Signed-off-by: Carlo Caione <carlo@caione.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/meson.dtsi | 74 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/meson6-atv1200.dts | 25 ++++++++++++ arch/arm/boot/dts/meson6.dtsi | 40 +++++++++++++++++++ 4 files changed, 140 insertions(+) create mode 100644 arch/arm/boot/dts/meson.dtsi create mode 100644 arch/arm/boot/dts/meson6-atv1200.dts create mode 100644 arch/arm/boot/dts/meson6.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index adb5ed9..4e2bb17 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -154,6 +154,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 0000000..ace5db8 --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + serial2 = &uart_B; + serial3 = &uart_C; + }; + + gic: interrupt-controller at c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer at c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart_AO: serial at c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial at c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial at c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial at c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 0000000..84576aa --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 0000000..f9d2cb5 --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi @@ -0,0 +1,40 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu at 200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu at 201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk at 0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */ -- 1.9.1
next prev parent reply other threads:[~2014-09-11 20:11 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-11 20:11 [PATCH v2 0/9] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Carlo Caione 2014-09-11 20:11 ` Carlo Caione [not found] ` <1410466300-19168-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org> 2014-09-11 20:11 ` [PATCH v2 1/9] ARM: meson: debug: add debug UART for earlyprintk support Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:11 ` [PATCH v2 2/9] ARM: meson: documentation: add UART documentation Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:11 ` [PATCH v2 3/9] ARM: meson: serial: add MesonX SoC on-chip uart driver Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 21:25 ` Greg KH 2014-09-11 21:25 ` Greg KH 2014-09-12 6:59 ` Carlo Caione 2014-09-12 6:59 ` Carlo Caione 2014-09-11 20:11 ` [PATCH v2 7/9] ARM: meson: add basic support for MesonX SoCs Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:11 ` [PATCH v2 4/9] ARM: meson: documentation: add timer documentation Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:59 ` Arnd Bergmann 2014-09-11 20:59 ` Arnd Bergmann 2014-09-11 20:11 ` [PATCH v2 5/9] ARM: meson6: clocksource: add Meson6 timer support Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:57 ` Arnd Bergmann 2014-09-11 20:57 ` Arnd Bergmann 2014-09-16 9:06 ` Matthias Brugger 2014-09-16 9:06 ` Matthias Brugger 2014-09-11 20:11 ` [PATCH v2 6/9] ARM: meson: documentation: add bindings documentation Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 20:11 ` Carlo Caione [this message] 2014-09-11 20:11 ` [PATCH v2 8/9] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Carlo Caione 2014-09-11 21:03 ` Arnd Bergmann 2014-09-11 21:03 ` Arnd Bergmann 2014-09-11 20:11 ` [PATCH v2 9/9] ARM: meson: update multi_v7_defconfig Carlo Caione 2014-09-11 20:11 ` Carlo Caione 2014-09-11 21:01 ` [PATCH v2 0/9] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Arnd Bergmann 2014-09-11 21:01 ` Arnd Bergmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1410466300-19168-9-git-send-email-carlo@caione.org \ --to=carlo@caione.org \ --cc=afaerber@suse.de \ --cc=b.galvani@gmail.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=grant.likely@linaro.org \ --cc=gregkh@linuxfoundation.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=jslaby@suse.cz \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=mark.rutland@arm.com \ --cc=matthias.bgg@gmail.com \ --cc=maxime.ripard@free-electrons.com \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.