pull request: iwlwifi-next 2014-09-15

pull request: iwlwifi-next 2014-09-15

[Emmanuel Grumbach]

[-- Attachment #1: Type: text/plain, Size: 7172 bytes --]

Hi John,

This is a pull request for 3.18. I have a few more patches for 3.18 that are not included here.
This pull request was big enough without them, and they rely on mac80211 patches that are not
in wireless-next yet. In my master branch, I merged Johannes's tag on mac80211-next to be able
to apply these patches, I'll send you another pull request once you'll pull from Johannes. Let
me know if you prefer me to merge wireless-next rather than mac80211-next. I just found it easier
for me.
I also merged iwlwifi-fixes to avoid minor conflicts.

I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS
and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more
to come soon. Besides this, nothing really special here.

Please pull, thanks!

The following changes since commit 712b24adc105518f7cbbb6f9f353efea48954bb9:

  iwlwifi: mvm: clean up AUX station handling (2014-09-03 22:49:13 +0300)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git for-john

for you to fetch changes up to f991e17ba2584e2be66476cc468f19769efd55cc:

  iwlwifi: mvm: align CSA GO NOA time event naming with the firmware (2014-09-14 22:02:24 +0300)

----------------------------------------------------------------
Arik Nemtsov (2):
      iwlwifi: mvm: move TDLS code to separate file
      iwlwifi: mvm: fix PSM disable during TDLS

Avri Altman (2):
      iwlwifi: mvm: remove unused static inline function
      iwlwifi: mvm: Fix skip over dtim configuration in d0i3

David Spinadel (1):
      iwlwifi: mvm: reduce active dwell time

Eliad Peller (2):
      iwlwifi: increase DEFAULT_MAX_TX_POWER
      iwlwifi: mvm: move IWL_MVM_UAPSD_QUEUES to constants.h

Emmanuel Grumbach (8):
      iwlwifi: mvm: enable scheduled scan on newest firmware
      iwlwifi: mvm: fix endianity issues with Smart Fifo commands
      iwlwiwi: mvm: use bss_conf->dtim_period instead of conf.ps_dtim_period
      iwlwifi: dvm: disable power save by default
      Merge remote-tracking branch 'iwlwifi-fixes/master' into NEXT
      iwlwifi: trans: don't configure the set_active in SCD for dvm
      iwlwifi: define the non shared antenna per hardware
      iwlwifi: mvm: allow to collect debug data when restart is disabled

Eran Harary (1):
      iwlwifi: mvm: allow preventing dummy notifications

Eyal Shapira (6):
      iwlwifi: mvm: treat EAPOLs like mgmt frames wrt rate
      iwlwifi: mvm: fix an overflow in iwl_mvm_get_signal_strength
      iwlwifi: mvm: add LDPC support
      iwlwifi: enable LDPC in 8000 chip family
      iwlwifi: mvm: rs: remove max_rate_idx
      iwlwifi: mvm: rs: don't zero tx stats after idle

Johannes Berg (9):
      iwlwifi: mvm: BT Coex - remove shadowing variable
      iwlwifi: mvm: correctly handle PM/QoS changes from mac80211
      iwlwifi: mvm: BT Coex - always initialize smps_mode
      iwlwifi: mvm: disable aggregation queues in station DB in FW
      iwlwifi: pcie: clear command data on freeing
      iwlwifi: mvm: don't update quota in firmware too often
      iwlwifi: mvm: update d0i3 debugfs
      iwlwifi: mvm: fix quota update avoidance
      iwlwifi: mvm: update QoS parameters when they change

Liad Kaufman (1):
      iwlwifi: make hw rev checking more readable

Luciano Coelho (5):
      iwlwifi: mvm: set MAC_FILTER_IN_BEACON correctly for STA/P2P client
      iwlwifi: mvm: reset ucode_loaded flag when mac80211 stop is called
      iwlwifi: mvm: fail temp test enabling if the ucode is not loaded
      iwlwifi: mvm: use the firmware to get the temperature during CT kill
      iwlwifi: mvm: align CSA GO NOA time event naming with the firmware

Max Stepanov (1):
      iwlwifi: mvm: add MVM_FW_MCAST_FILTER_PASS_ALL option

Oren Givon (2):
      iwlwifi: add PCI IDs and add then new 3165 series
      iwlwifi: add and edit 8000 series PCI IDs

Toralf F�¶rster (1):
      iwlwifi/iwl-drv.c: fix typo defualt -> default

 drivers/net/wireless/iwlwifi/Kconfig            |   2 -
 drivers/net/wireless/iwlwifi/dvm/power.c        |   2 +-
 drivers/net/wireless/iwlwifi/dvm/rxon.c         |  12 ++++++
 drivers/net/wireless/iwlwifi/iwl-7000.c         |  35 +++++++++++++---
 drivers/net/wireless/iwlwifi/iwl-8000.c         |  16 ++++++-
 drivers/net/wireless/iwlwifi/iwl-config.h       |   9 ++++
 drivers/net/wireless/iwlwifi/iwl-csr.h          |  10 +++++
 drivers/net/wireless/iwlwifi/iwl-drv.c          |   2 +-
 drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c |   3 ++
 drivers/net/wireless/iwlwifi/iwl-fw.h           |   2 +
 drivers/net/wireless/iwlwifi/iwl-io.c           |   2 +-
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c    |   7 ++--
 drivers/net/wireless/iwlwifi/iwl-trans.h        |   8 +---
 drivers/net/wireless/iwlwifi/mvm/Makefile       |   2 +-
 drivers/net/wireless/iwlwifi/mvm/coex.c         |  13 +++---
 drivers/net/wireless/iwlwifi/mvm/constants.h    |   8 ++++
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c  |   3 +-
 drivers/net/wireless/iwlwifi/mvm/debugfs.c      |  15 +++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h       |  40 ++++++++++++++++--
 drivers/net/wireless/iwlwifi/mvm/fw.c           |   3 ++
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c     |  20 ++++-----
 drivers/net/wireless/iwlwifi/mvm/mac80211.c     | 175 ++++++++++++++++++++++++----------------------------------------------------
 drivers/net/wireless/iwlwifi/mvm/mvm.h          |  30 +++++++++----
 drivers/net/wireless/iwlwifi/mvm/nvm.c          |   3 +-
 drivers/net/wireless/iwlwifi/mvm/ops.c          |  18 ++++++++
 drivers/net/wireless/iwlwifi/mvm/power.c        |  67 +++++++++++++++--------------
 drivers/net/wireless/iwlwifi/mvm/quota.c        |  32 +++++++++++---
 drivers/net/wireless/iwlwifi/mvm/rs.c           |  68 +++++++++++++-----------------
 drivers/net/wireless/iwlwifi/mvm/rs.h           |  10 +++--
 drivers/net/wireless/iwlwifi/mvm/rx.c           |   6 +--
 drivers/net/wireless/iwlwifi/mvm/scan.c         |   4 +-
 drivers/net/wireless/iwlwifi/mvm/sf.c           |   6 ++-
 drivers/net/wireless/iwlwifi/mvm/sta.c          |  12 +++++-
 drivers/net/wireless/iwlwifi/mvm/tdls.c         | 149 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/time-event.c   |  10 ++---
 drivers/net/wireless/iwlwifi/mvm/time-event.h   |   8 ++--
 drivers/net/wireless/iwlwifi/mvm/tt.c           | 326 ++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------------------------------------
 drivers/net/wireless/iwlwifi/mvm/tx.c           |  10 +++--
 drivers/net/wireless/iwlwifi/pcie/drv.c         |   8 ++++
 drivers/net/wireless/iwlwifi/pcie/internal.h    |   2 +
 drivers/net/wireless/iwlwifi/pcie/rx.c          |   2 +-
 drivers/net/wireless/iwlwifi/pcie/trans.c       |   3 +-
 drivers/net/wireless/iwlwifi/pcie/tx.c          |  12 +++---
 43 files changed, 649 insertions(+), 526 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/tdls.c


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH 01/12] iwlwifi: mvm: enable scheduled scan on newest firmware

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Scheduled scan was disabled because of a bug in the firmware.
The firmware reported support for this feature, but enabling
it led to assertions.
The bugs have been fixes in latest firmware versions, so that
we can re-enable the feature on latest firmwares only.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 7c87965..c4000a1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -396,12 +396,14 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	else
 		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	/* TODO: enable that only for firmwares that don't crash */
-	/* hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; */
-	hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
-	hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
-	/* we create the 802.11 header and zero length SSID IE. */
-	hw->wiphy->max_sched_scan_ie_len = SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2;
+	if (IWL_UCODE_API(mvm->fw->ucode_ver) >= 10) {
+		hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+		hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
+		hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
+		/* we create the 802.11 header and zero length SSID IE. */
+		hw->wiphy->max_sched_scan_ie_len =
+			SCAN_OFFLOAD_PROBE_REQ_SIZE - 24 - 2;
+	}
 
 	hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN |
 			       NL80211_FEATURE_LOW_PRIORITY_SCAN |
-- 
1.9.1

[PATCH 02/12] iwlwifi: mvm: BT Coex - remove shadowing variable

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

The variable 'u32 mode' exists twice, the latter shadowing
the former - remove the latter since there's no need for
two variables.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/coex.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 2291bbc..75178f3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -585,8 +585,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 	lockdep_assert_held(&mvm->mutex);
 
 	if (unlikely(mvm->bt_force_ant_mode != BT_FORCE_ANT_DIS)) {
-		u32 mode;
-
 		switch (mvm->bt_force_ant_mode) {
 		case BT_FORCE_ANT_BT:
 			mode = BT_COEX_BT;
-- 
1.9.1

[PATCH 03/12] iwlwifi: mvm: set MAC_FILTER_IN_BEACON correctly for STA/P2P client

[Emmanuel Grumbach]

From: Luciano Coelho <luciano.coelho@intel.com>

In commit cad3f08c (iwlwifi: mvm: enable MAC_FILTER_IN_BEACON when
forced_assoc_off is set) the code to set the MAC_FILTER_IN_BEACON flag
was accidentally moved to the main block of the if statement, while it
should be in the else block instead.  Move it to the right place.

Fixes: cad3f08c23de ("iwlwifi: mvm: enable MAC_FILTER_IN_BEACON when forced_assoc_off is set")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 0e523e2..8242e68 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -721,11 +721,6 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm,
 	    !force_assoc_off) {
 		u32 dtim_offs;
 
-		/* Allow beacons to pass through as long as we are not
-		 * associated, or we do not have dtim period information.
-		 */
-		cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON);
-
 		/*
 		 * The DTIM count counts down, so when it is N that means N
 		 * more beacon intervals happen until the DTIM TBTT. Therefore
@@ -759,6 +754,11 @@ static int iwl_mvm_mac_ctxt_cmd_sta(struct iwl_mvm *mvm,
 		ctxt_sta->is_assoc = cpu_to_le32(1);
 	} else {
 		ctxt_sta->is_assoc = cpu_to_le32(0);
+
+		/* Allow beacons to pass through as long as we are not
+		 * associated, or we do not have dtim period information.
+		 */
+		cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_BEACON);
 	}
 
 	ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int);
-- 
1.9.1

[PATCH 04/12] iwlwifi: mvm: fix endianity issues with Smart Fifo commands

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This code was broken on big endian systems. Sparse didn't
catch the bug since the firmware command was not tagged as
little endian.
Fix the bug for big endian systems and tag the field in the
firmware command to prevent such issues in the future.

Cc: stable@vger.kernel.org [3.14+]
Fixes: 1f3b0ff8ec ("iwlwifi: mvm: Add Smart FIFO support")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h | 4 ++--
 drivers/net/wireless/iwlwifi/mvm/sf.c     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 95f5b32..9a922f3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -1563,14 +1563,14 @@ enum iwl_sf_scenario {
 
 /**
  * Smart Fifo configuration command.
- * @state: smart fifo state, types listed in iwl_sf_sate.
+ * @state: smart fifo state, types listed in enum %iwl_sf_sate.
  * @watermark: Minimum allowed availabe free space in RXF for transient state.
  * @long_delay_timeouts: aging and idle timer values for each scenario
  * in long delay state.
  * @full_on_timeouts: timer values for each scenario in full on state.
  */
 struct iwl_sf_cfg_cmd {
-	enum iwl_sf_state state;
+	__le32 state;
 	__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
 	__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
 	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
index 7edfd15..e843b67 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sf.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -172,7 +172,7 @@ static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id,
 			     enum iwl_sf_state new_state)
 {
 	struct iwl_sf_cfg_cmd sf_cmd = {
-		.state = new_state,
+		.state = cpu_to_le32(new_state),
 	};
 	struct ieee80211_sta *sta;
 	int ret = 0;
-- 
1.9.1

[PATCH 05/12] iwlwifi: increase DEFAULT_MAX_TX_POWER

[Emmanuel Grumbach]

From: Eliad Peller <eliad@wizery.com>

The chip is able to transmit up to 22dBm, so set
the constant appropriately.

CC: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-config.h    | 2 ++
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 4 +---
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 8da596d..942c99b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -120,6 +120,8 @@ enum iwl_led_mode {
 #define IWL_LONG_WD_TIMEOUT	10000
 #define IWL_MAX_WD_TIMEOUT	120000
 
+#define IWL_DEFAULT_MAX_TX_POWER 22
+
 /* Antenna presence definitions */
 #define	ANT_NONE	0x0
 #define	ANT_A		BIT(0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 018af29..354255f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -146,8 +146,6 @@ static const u8 iwl_nvm_channels_family_8000[] = {
 #define LAST_2GHZ_HT_PLUS		9
 #define LAST_5GHZ_HT			161
 
-#define DEFAULT_MAX_TX_POWER 16
-
 /* rate data (static) */
 static struct ieee80211_rate iwl_cfg80211_rates[] = {
 	{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
@@ -295,7 +293,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		 * Default value - highest tx power value.  max_power
 		 * is not used in mvm, and is used for backwards compatibility
 		 */
-		channel->max_power = DEFAULT_MAX_TX_POWER;
+		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
 		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
 		IWL_DEBUG_EEPROM(dev,
 				 "Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
-- 
1.9.1

[PATCH 06/12] iwlwifi: mvm: correctly handle PM/QoS changes from mac80211

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

When mac80211 requests multiple BSS config changes, as for example
while associating, we ignore power management and QoS changes and
only apply them later. Fix that by removing the "else" and making
the conditions independent.

Also move it after (potential) beacon filter enablement to have
that already enabled when going into power management code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index c4000a1..cdc272d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1526,11 +1526,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		 */
 		iwl_mvm_remove_time_event(mvm, mvmvif,
 					  &mvmvif->time_event_data);
-	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
-			      BSS_CHANGED_QOS)) {
-		ret = iwl_mvm_power_update_mac(mvm);
-		if (ret)
-			IWL_ERR(mvm, "failed to update power mode\n");
 	}
 
 	if (changes & BSS_CHANGED_BEACON_INFO) {
@@ -1538,6 +1533,12 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, 0));
 	}
 
+	if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS)) {
+		ret = iwl_mvm_power_update_mac(mvm);
+		if (ret)
+			IWL_ERR(mvm, "failed to update power mode\n");
+	}
+
 	if (changes & BSS_CHANGED_TXPOWER) {
 		IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n",
 				bss_conf->txpower);
-- 
1.9.1

[PATCH 07/12] iwlwifi: mvm: treat EAPOLs like mgmt frames wrt rate

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

Using the LQ table which is initially set according to
the rssi could lead to EAPOLs being sent in high legacy
rates like 54mbps.
It's better to avoid sending EAPOLs in high rates as it reduces
the chances of a successful 4-Way handshake.
Avoid this and treat them like other mgmt frames which would
initially get sent at the basic rate.

Cc: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/tx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index dbc8707..9ee410b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -168,10 +168,14 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
 
 	/*
 	 * for data packets, rate info comes from the table inside the fw. This
-	 * table is controlled by LINK_QUALITY commands
+	 * table is controlled by LINK_QUALITY commands. Exclude ctrl port
+	 * frames like EAPOLs which should be treated as mgmt frames. This
+	 * avoids them being sent initially in high rates which increases the
+	 * chances for completion of the 4-Way handshake.
 	 */
 
-	if (ieee80211_is_data(fc) && sta) {
+	if (ieee80211_is_data(fc) && sta &&
+	    !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) {
 		tx_cmd->initial_rate_index = 0;
 		tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE);
 		return;
-- 
1.9.1

[PATCH 08/12] iwlwiwi: mvm: use bss_conf->dtim_period instead of conf.ps_dtim_period

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The latter is meant for software implementation of power
save and is not per-virtual interface. Since our driver
supports multiple virtual interfaces, we need to use
vif->bss_conf.dtim_period.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 3 +--
 drivers/net/wireless/iwlwifi/mvm/power.c       | 5 ++---
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 2e90ff7..87e517b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -74,8 +74,7 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm,
 
 	switch (param) {
 	case MVM_DEBUGFS_PM_KEEP_ALIVE: {
-		struct ieee80211_hw *hw = mvm->hw;
-		int dtimper = hw->conf.ps_dtim_period ?: 1;
+		int dtimper = vif->bss_conf.dtim_period ?: 1;
 		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
 
 		IWL_DEBUG_POWER(mvm, "debugfs: set keep_alive= %d sec\n", val);
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 2b2d108..d9769a2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -281,7 +281,6 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 				    struct ieee80211_vif *vif,
 				    struct iwl_mac_power_cmd *cmd)
 {
-	struct ieee80211_hw *hw = mvm->hw;
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	struct ieee80211_channel *chan;
 	int dtimper, dtimper_msec;
@@ -292,7 +291,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 
 	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
 							    mvmvif->color));
-	dtimper = hw->conf.ps_dtim_period ?: 1;
+	dtimper = vif->bss_conf.dtim_period;
 
 	/*
 	 * Regardless of power management state the driver must set
@@ -885,7 +884,7 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	if (enable) {
 		/* configure skip over dtim up to 300 msec */
-		int dtimper = mvm->hw->conf.ps_dtim_period ?: 1;
+		int dtimper = vif->bss_conf.dtim_period ?: 1;
 		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
 
 		if (WARN_ON(!dtimper_msec))
-- 
1.9.1

[PATCH 09/12] iwlwifi: mvm: BT Coex - always initialize smps_mode

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

smps_mode is used uninitialized in a debug statement in AP
mode, so always initialize it.

While at it, fix a typo.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/coex.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 75178f3..ce71625 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -754,7 +754,8 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 	struct iwl_bt_iterator_data *data = _data;
 	struct iwl_mvm *mvm = data->mvm;
 	struct ieee80211_chanctx_conf *chanctx_conf;
-	enum ieee80211_smps_mode smps_mode;
+	/* default smps_mode is AUTOMATIC - only used for client modes */
+	enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_AUTOMATIC;
 	u32 bt_activity_grading;
 	int ave_rssi;
 
@@ -762,8 +763,6 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
-		/* default smps_mode for BSS / P2P client is AUTOMATIC */
-		smps_mode = IEEE80211_SMPS_AUTOMATIC;
 		break;
 	case NL80211_IFTYPE_AP:
 		if (!mvmvif->ap_ibss_active)
@@ -795,7 +794,7 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
 	else if (bt_activity_grading >= BT_LOW_TRAFFIC)
 		smps_mode = IEEE80211_SMPS_DYNAMIC;
 
-	/* relax SMPS contraints for next association */
+	/* relax SMPS constraints for next association */
 	if (!vif->bss_conf.assoc)
 		smps_mode = IEEE80211_SMPS_AUTOMATIC;
 
-- 
1.9.1

[PATCH 10/12] iwlwifi: dvm: disable power save by default

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In
https://bugzilla.kernel.org/show_bug.cgi?id=84031,
the submitter said that disabling power saving helped,
do just that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/power.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c
index 760c45c..1513dbc 100644
--- a/drivers/net/wireless/iwlwifi/dvm/power.c
+++ b/drivers/net/wireless/iwlwifi/dvm/power.c
@@ -40,7 +40,7 @@
 #include "commands.h"
 #include "power.h"
 
-static bool force_cam;
+static bool force_cam = true;
 module_param(force_cam, bool, 0644);
 MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");
 
-- 
1.9.1

[PATCH 11/12] iwlwifi: add PCI IDs and add then new 3165 series

[Emmanuel Grumbach]

From: Oren Givon <oren.givon@intel.com>

This change does the following:
1) Add a new 7265 series PCI ID
2) Add two new 3160 series PCI IDs
3) Add the new 3165 series PCI IDs and configurations

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c   | 16 ++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-config.h |  1 +
 drivers/net/wireless/iwlwifi/pcie/drv.c   |  7 +++++++
 3 files changed, 24 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index d67a37a..d53adc2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -83,6 +83,8 @@
 #define IWL7260_TX_POWER_VERSION	0xffff /* meaningless */
 #define IWL3160_NVM_VERSION		0x709
 #define IWL3160_TX_POWER_VERSION	0xffff /* meaningless */
+#define IWL3165_NVM_VERSION		0x709
+#define IWL3165_TX_POWER_VERSION	0xffff /* meaningless */
 #define IWL7265_NVM_VERSION		0x0a1d
 #define IWL7265_TX_POWER_VERSION	0xffff /* meaningless */
 
@@ -92,6 +94,9 @@
 #define IWL3160_FW_PRE "iwlwifi-3160-"
 #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode"
 
+#define IWL3165_FW_PRE "iwlwifi-3165-"
+#define IWL3165_MODULE_FIRMWARE(api) IWL3165_FW_PRE __stringify(api) ".ucode"
+
 #define IWL7265_FW_PRE "iwlwifi-7265-"
 #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode"
 
@@ -213,6 +218,16 @@ static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = {
 	{0},
 };
 
+const struct iwl_cfg iwl3165_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 3165",
+	.fw_name_pre = IWL3165_FW_PRE,
+	IWL_DEVICE_7000,
+	.ht_params = &iwl7000_ht_params,
+	.nvm_ver = IWL3165_NVM_VERSION,
+	.nvm_calib_ver = IWL3165_TX_POWER_VERSION,
+	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
+};
+
 const struct iwl_cfg iwl7265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
@@ -245,4 +260,5 @@ const struct iwl_cfg iwl7265_n_cfg = {
 
 MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
 MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL3165_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
 MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 942c99b..3d7cc37 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -337,6 +337,7 @@ extern const struct iwl_cfg iwl7260_n_cfg;
 extern const struct iwl_cfg iwl3160_2ac_cfg;
 extern const struct iwl_cfg iwl3160_2n_cfg;
 extern const struct iwl_cfg iwl3160_n_cfg;
+extern const struct iwl_cfg iwl3165_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2n_cfg;
 extern const struct iwl_cfg iwl7265_n_cfg;
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 98950e4..8bb8305 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -352,11 +352,17 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)},
 	{IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x08B4, 0x8370, iwl3160_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x08B4, 0x8272, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x1070, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x1170, iwl3160_2ac_cfg)},
 
+/* 3165 Series */
+	{IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)},
+
 /* 7265 Series */
 	{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)},
@@ -378,6 +384,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x900A, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
-- 
1.9.1

[PATCH 12/12] iwlwifi: mvm: fix an overflow in iwl_mvm_get_signal_strength

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

The idea here is to translate a value of 0 received from
the firmware to the lowest rssi figure. As rx_status->chain_signal
is a signed byte the lowest possible value is -128 and not -256.
-256 was causing 0 to get stored in the signed byte.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index 4b98987..bf5cd8c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -149,13 +149,13 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm,
 	    le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_ENERGY_ANT_ABC_IDX]);
 	energy_a = (val & IWL_RX_INFO_ENERGY_ANT_A_MSK) >>
 						IWL_RX_INFO_ENERGY_ANT_A_POS;
-	energy_a = energy_a ? -energy_a : -256;
+	energy_a = energy_a ? -energy_a : S8_MIN;
 	energy_b = (val & IWL_RX_INFO_ENERGY_ANT_B_MSK) >>
 						IWL_RX_INFO_ENERGY_ANT_B_POS;
-	energy_b = energy_b ? -energy_b : -256;
+	energy_b = energy_b ? -energy_b : S8_MIN;
 	energy_c = (val & IWL_RX_INFO_ENERGY_ANT_C_MSK) >>
 						IWL_RX_INFO_ENERGY_ANT_C_POS;
-	energy_c = energy_c ? -energy_c : -256;
+	energy_c = energy_c ? -energy_c : S8_MIN;
 	max_energy = max(energy_a, energy_b);
 	max_energy = max(max_energy, energy_c);
 
-- 
1.9.1

[PATCH 01/28] iwlwifi: mvm: add LDPC support

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

Use LDPC for Tx and publish support for Rx in case the chip
supports LDPC. Enable it for the 7265 family.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c         | 12 ++++++++---
 drivers/net/wireless/iwlwifi/iwl-config.h       |  2 ++
 drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c |  3 +++
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c    |  3 +++
 drivers/net/wireless/iwlwifi/mvm/rs.c           | 27 +++++++++++++++++++------
 drivers/net/wireless/iwlwifi/mvm/rs.h           |  2 ++
 6 files changed, 40 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 8e99dff..79c8f74 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -220,6 +220,12 @@ static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = {
 	{0},
 };
 
+static const struct iwl_ht_params iwl7265_ht_params = {
+	.stbc = true,
+	.ldpc = true,
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
 const struct iwl_cfg iwl3165_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 3165",
 	.fw_name_pre = IWL3165_FW_PRE,
@@ -234,7 +240,7 @@ const struct iwl_cfg iwl7265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
 	IWL_DEVICE_7000,
-	.ht_params = &iwl7000_ht_params,
+	.ht_params = &iwl7265_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
 	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
@@ -244,7 +250,7 @@ const struct iwl_cfg iwl7265_2n_cfg = {
 	.name = "Intel(R) Dual Band Wireless N 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
 	IWL_DEVICE_7000,
-	.ht_params = &iwl7000_ht_params,
+	.ht_params = &iwl7265_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
 	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
@@ -254,7 +260,7 @@ const struct iwl_cfg iwl7265_n_cfg = {
 	.name = "Intel(R) Wireless N 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
 	IWL_DEVICE_7000,
-	.ht_params = &iwl7000_ht_params,
+	.ht_params = &iwl7265_ht_params,
 	.nvm_ver = IWL7265_NVM_VERSION,
 	.nvm_calib_ver = IWL7265_TX_POWER_VERSION,
 	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 3d7cc37..07c0f1f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -171,6 +171,7 @@ struct iwl_base_params {
 
 /*
  * @stbc: support Tx STBC and 1*SS Rx STBC
+ * @ldpc: support Tx/Rx with LDPC
  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
  * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
  */
@@ -178,6 +179,7 @@ struct iwl_ht_params {
 	enum ieee80211_smps_mode smps_mode;
 	const bool ht_greenfield_support; /* if used set to true */
 	const bool stbc;
+	const bool ldpc;
 	bool use_rts_for_aggregation;
 	u8 ht40_bands;
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
index 07ff7e0..74b796d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
@@ -758,6 +758,9 @@ void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg,
 			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
 	}
 
+	if (cfg->ht_params->ldpc)
+		ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
 	if (iwlwifi_mod_params.amsdu_size_8K)
 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 40718f8..c302e74 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -334,6 +334,9 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 		       3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT |
 		       7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
 
+	if (cfg->ht_params->ldpc)
+		vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC;
+
 	if (num_tx_ants > 1)
 		vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC;
 	else
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 17002cf..6a13120 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -505,10 +505,10 @@ static const char *rs_pretty_lq_type(enum iwl_table_type type)
 static inline void rs_dump_rate(struct iwl_mvm *mvm, const struct rs_rate *rate,
 				const char *prefix)
 {
-	IWL_DEBUG_RATE(mvm, "%s: (%s: %d) ANT: %s BW: %d SGI: %d\n",
+	IWL_DEBUG_RATE(mvm, "%s: (%s: %d) ANT: %s BW: %d SGI: %d LDPC: %d\n",
 		       prefix, rs_pretty_lq_type(rate->type),
 		       rate->index, rs_pretty_ant(rate->ant),
-		       rate->bw, rate->sgi);
+		       rate->bw, rate->sgi, rate->ldpc);
 }
 
 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
@@ -742,6 +742,8 @@ static u32 ucode_rate_from_rs_rate(struct iwl_mvm *mvm,
 	ucode_rate |= rate->bw;
 	if (rate->sgi)
 		ucode_rate |= RATE_MCS_SGI_MSK;
+	if (rate->ldpc)
+		ucode_rate |= RATE_MCS_LDPC_MSK;
 
 	return ucode_rate;
 }
@@ -779,6 +781,8 @@ static int rs_rate_from_ucode_rate(const u32 ucode_rate,
 	/* HT or VHT */
 	if (ucode_rate & RATE_MCS_SGI_MSK)
 		rate->sgi = true;
+	if (ucode_rate & RATE_MCS_LDPC_MSK)
+		rate->ldpc = true;
 
 	rate->bw = ucode_rate & RATE_MCS_CHAN_WIDTH_MSK;
 
@@ -965,13 +969,13 @@ static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta,
 			     rate->index > IWL_RATE_MCS_9_INDEX);
 
 		rate->index = rs_ht_to_legacy[rate->index];
+		rate->ldpc = false;
 	} else {
 		/* Downgrade to SISO with same MCS if in MIMO  */
 		rate->type = is_vht_mimo2(rate) ?
 			LQ_VHT_SISO : LQ_HT_SISO;
 	}
 
-
 	if (num_of_ant(rate->ant) > 1)
 		rate->ant = first_antenna(mvm->fw->valid_tx_ant);
 
@@ -1621,6 +1625,7 @@ static int rs_switch_to_column(struct iwl_mvm *mvm,
 	}
 
 	rate->bw = rs_bw_from_sta_bw(sta);
+	rate->ldpc = lq_sta->ldpc;
 	search_tbl->column = col_id;
 	rs_set_expected_tpt_table(lq_sta, search_tbl);
 
@@ -2342,6 +2347,7 @@ static void rs_initialize_lq(struct iwl_mvm *mvm,
 	rate->index = i;
 	rate->ant = first_antenna(valid_tx_ant);
 	rate->sgi = false;
+	rate->ldpc = false;
 	rate->bw = RATE_MCS_CHAN_WIDTH_20;
 	if (band == IEEE80211_BAND_5GHZ)
 		rate->type = LQ_LEGACY_A;
@@ -2610,9 +2616,16 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
 
 		lq_sta->is_vht = false;
+		if (mvm->cfg->ht_params->ldpc &&
+		    (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING))
+			lq_sta->ldpc = true;
 	} else {
 		rs_vht_set_enabled_rates(sta, vht_cap, lq_sta);
 		lq_sta->is_vht = true;
+
+		if (mvm->cfg->ht_params->ldpc &&
+		    (vht_cap->cap & IEEE80211_VHT_CAP_RXLDPC))
+			lq_sta->ldpc = true;
 	}
 
 	lq_sta->max_legacy_rate_idx = find_last_bit(&lq_sta->active_legacy_rate,
@@ -2622,11 +2635,12 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	lq_sta->max_mimo2_rate_idx = find_last_bit(&lq_sta->active_mimo2_rate,
 						   BITS_PER_LONG);
 
-	IWL_DEBUG_RATE(mvm, "RATE MASK: LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d\n",
+	IWL_DEBUG_RATE(mvm,
+		       "RATE MASK: LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d\n",
 		       lq_sta->active_legacy_rate,
 		       lq_sta->active_siso_rate,
 		       lq_sta->active_mimo2_rate,
-		       lq_sta->is_vht);
+		       lq_sta->is_vht, lq_sta->ldpc);
 	IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n",
 		       lq_sta->max_legacy_rate_idx,
 		       lq_sta->max_siso_rate_idx,
@@ -3032,8 +3046,9 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 				   (is_ht20(rate)) ? "20MHz" :
 				   (is_ht40(rate)) ? "40MHz" :
 				   (is_ht80(rate)) ? "80Mhz" : "BAD BW");
-		   desc += sprintf(buff+desc, " %s %s\n",
+		   desc += sprintf(buff+desc, " %s %s %s\n",
 				   (rate->sgi) ? "SGI" : "NGI",
+				   (rate->ldpc) ? "LDPC" : "BCC",
 				   (lq_sta->is_agg) ? "AGG on" : "");
 	}
 	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index f27b9d6..824a750 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -207,6 +207,7 @@ struct rs_rate {
 	u8 ant;
 	u32 bw;
 	bool sgi;
+	bool ldpc;
 };
 
 
@@ -329,6 +330,7 @@ struct iwl_lq_sta {
 				 */
 	u64 last_tx;
 	bool is_vht;
+	bool ldpc;              /* LDPC Rx is supported by the STA */
 	enum ieee80211_band band;
 
 	struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT];
-- 
1.9.1

[PATCH 02/28] iwlwifi: add and edit 8000 series PCI IDs

[Emmanuel Grumbach]

From: Oren Givon <oren.givon@intel.com>

Edit some 8000 series PCI IDs and add configuration to
Dual Band Wireless N 8260 devices.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-8000.c   | 9 +++++++++
 drivers/net/wireless/iwlwifi/iwl-config.h | 1 +
 drivers/net/wireless/iwlwifi/pcie/drv.c   | 1 +
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index 23a67bf..3c576ee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -117,6 +117,15 @@ static const struct iwl_ht_params iwl8000_ht_params = {
 	.led_mode = IWL_LED_RF_STATE,				\
 	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000
 
+const struct iwl_cfg iwl8260_2n_cfg = {
+	.name = "Intel(R) Dual Band Wireless N 8260",
+	.fw_name_pre = IWL8000_FW_PRE,
+	IWL_DEVICE_8000,
+	.ht_params = &iwl8000_ht_params,
+	.nvm_ver = IWL8000_NVM_VERSION,
+	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+};
+
 const struct iwl_cfg iwl8260_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 07c0f1f..1b9c77d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -343,6 +343,7 @@ extern const struct iwl_cfg iwl3165_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2n_cfg;
 extern const struct iwl_cfg iwl7265_n_cfg;
+extern const struct iwl_cfg iwl8260_2n_cfg;
 extern const struct iwl_cfg iwl8260_2ac_cfg;
 extern const struct iwl_cfg iwl8260_2ac_sdio_cfg;
 #endif /* CONFIG_IWLMVM */
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index b9d5049..ca68c3c 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -405,6 +405,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 
 /* 8000 Series */
 	{IWL_PCI_DEVICE(0x24F3, 0x0010, iwl8260_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x24F3, 0x0004, iwl8260_2n_cfg)},
 	{IWL_PCI_DEVICE(0x24F4, 0x0030, iwl8260_2ac_cfg)},
 #endif /* CONFIG_IWLMVM */
 
-- 
1.9.1

[PATCH 03/28] iwlwifi: mvm: allow preventing dummy notifications

[Emmanuel Grumbach]

From: Eran Harary <eran.harary@intel.com>

The firwmare now allows the driver to disable dummy
notifications. These notifications sent by the firmware
are an overhead for slow buses. They are still useful for
fast buses.
Add a hardware switch to prevent these notifications only
on devices that work on slow buses.

Signed-off-by: Eran <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-8000.c   | 1 +
 drivers/net/wireless/iwlwifi/iwl-config.h | 1 +
 drivers/net/wireless/iwlwifi/iwl-fw.h     | 2 ++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h | 2 ++
 drivers/net/wireless/iwlwifi/mvm/sf.c     | 4 ++++
 5 files changed, 10 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index 3c576ee..c1ef165 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -144,6 +144,7 @@ const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
 	.default_nvm_file = DEFAULT_NVM_FILE_FAMILY_8000,
 	.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
+	.disable_dummy_notification = true,
 };
 
 MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 1b9c77d..687e9e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -282,6 +282,7 @@ struct iwl_cfg {
 	bool no_power_up_nic_in_init;
 	const char *default_nvm_file;
 	unsigned int max_rx_agg_size;
+	bool disable_dummy_notification;
 };
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index f68cba4..62c46eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -127,6 +127,7 @@ enum iwl_ucode_tlv_flag {
  * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA.
  * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit.
  * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API.
+ * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif.
  * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
  *	longer than the passive one, which is essential for fragmented scan.
  */
@@ -137,6 +138,7 @@ enum iwl_ucode_tlv_api {
 	IWL_UCODE_TLV_API_CSA_FLOW		= BIT(4),
 	IWL_UCODE_TLV_API_DISABLE_STA_TX	= BIT(5),
 	IWL_UCODE_TLV_API_LMAC_SCAN		= BIT(6),
+	IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF	= BIT(7),
 	IWL_UCODE_TLV_API_FRAGMENTED_SCAN	= BIT(8),
 };
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 541b844..b599b52 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -1601,6 +1601,8 @@ enum iwl_sf_scenario {
 
 #define SF_LONG_DELAY_AGING_TIMER 1000000	/* 1 Sec */
 
+#define SF_CFG_DUMMY_NOTIF_OFF	BIT(16)
+
 /**
  * Smart Fifo configuration command.
  * @state: smart fifo state, types listed in enum %iwl_sf_sate.
diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
index f88410c..7eb78e2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sf.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -179,6 +179,10 @@ static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id,
 	struct ieee80211_sta *sta;
 	int ret = 0;
 
+	if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF &&
+	    mvm->cfg->disable_dummy_notification)
+		sf_cmd.state |= cpu_to_le32(SF_CFG_DUMMY_NOTIF_OFF);
+
 	/*
 	 * If an associated AP sta changed its antenna configuration, the state
 	 * will remain FULL_ON but SF parameters need to be reconsidered.
-- 
1.9.1

[PATCH 04/28] iwlwifi: enable LDPC in 8000 chip family

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

This chip family supports LDPC so enable it.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-8000.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index c1ef165..db67631 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -103,6 +103,7 @@ static const struct iwl_base_params iwl8000_base_params = {
 };
 
 static const struct iwl_ht_params iwl8000_ht_params = {
+	.ldpc = true,
 	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
 };
 
-- 
1.9.1

[PATCH 05/28] iwlwifi: mvm: rs: remove max_rate_idx

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

max_rate_idx constraint is deprecated and it's handling is
faulty as well as it is relevant only for legacy rates but
was considered in HT/VHT. In most cases there was no side effect
as max_rate_idx was set to -1 but in certain cases like P2P
it got set to an actual rate idx which would limit the maximum
rate in HT/VHT by mistake.
max_rate_idx should be replaced by the masks fields but for
now remove it.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 31 +++----------------------------
 drivers/net/wireless/iwlwifi/mvm/rs.h |  1 -
 2 files changed, 3 insertions(+), 29 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 6a13120..94c5299 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2036,18 +2036,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 		return;
 	}
 
-	/* force user max rate if set by user */
-	if ((lq_sta->max_rate_idx != -1) &&
-	    (lq_sta->max_rate_idx < index)) {
-		index = lq_sta->max_rate_idx;
-		update_lq = 1;
-		window = &(tbl->win[index]);
-		IWL_DEBUG_RATE(mvm,
-			       "Forcing user max rate %d\n",
-			       index);
-		goto lq_update;
-	}
-
+	/* TODO: handle rate_idx_mask and rate_idx_mcs_mask */
 	window = &(tbl->win[index]);
 
 	/*
@@ -2135,10 +2124,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	low = high_low & 0xff;
 	high = (high_low >> 8) & 0xff;
 
-	/* If user set max rate, dont allow higher than user constrain */
-	if ((lq_sta->max_rate_idx != -1) &&
-	    (lq_sta->max_rate_idx < high))
-		high = IWL_RATE_INVALID;
+	/* TODO: handle rate_idx_mask and rate_idx_mcs_mask */
 
 	sr = window->success_ratio;
 
@@ -2370,23 +2356,13 @@ static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta,
 			struct ieee80211_tx_rate_control *txrc)
 {
 	struct sk_buff *skb = txrc->skb;
-	struct ieee80211_supported_band *sband = txrc->sband;
 	struct iwl_op_mode *op_mode __maybe_unused =
 			(struct iwl_op_mode *)mvm_r;
 	struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode);
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_lq_sta *lq_sta = mvm_sta;
 
-	/* Get max rate if user set max rate */
-	if (lq_sta) {
-		lq_sta->max_rate_idx = txrc->max_rate_idx;
-		if ((sband->band == IEEE80211_BAND_5GHZ) &&
-		    (lq_sta->max_rate_idx != -1))
-			lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
-		if ((lq_sta->max_rate_idx < 0) ||
-		    (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
-			lq_sta->max_rate_idx = -1;
-	}
+	/* TODO: handle rate_idx_mask and rate_idx_mcs_mask */
 
 	/* Treat uninitialized rate scaling data same as non-existing. */
 	if (lq_sta && !lq_sta->pers.drv) {
@@ -2587,7 +2563,6 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
 	 * after assoc.. */
 
-	lq_sta->max_rate_idx = -1;
 	lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
 	lq_sta->band = sband->band;
 	/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index 824a750..98bb9b7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -345,7 +345,6 @@ struct iwl_lq_sta {
 	u8 max_siso_rate_idx;
 	u8 max_mimo2_rate_idx;
 
-	s8 max_rate_idx;     /* Max rate set by user */
 	u8 missed_rate_counter;
 
 	struct iwl_lq_cmd lq;
-- 
1.9.1

[PATCH 06/28] iwlwifi: mvm: reset ucode_loaded flag when mac80211 stop is called

[Emmanuel Grumbach]

From: Luciano Coelho <luciano.coelho@intel.com>

We rely on the value of the mvm->ucode_loaded flag to decide whether
or not we can perform certain operations (e.g. access to some debugfs
entries), so we need to reset it when the mac80211 stop operation is
called and the hardware is shutdown.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 069bb8e..bcfb03c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -890,6 +890,8 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	/* the fw is stopped, the aux sta is dead: clean up driver state */
 	iwl_mvm_del_aux_sta(mvm);
 
+	mvm->ucode_loaded = false;
+
 	mutex_unlock(&mvm->mutex);
 
 	/*
-- 
1.9.1

[PATCH 07/28] iwlwifi: mvm: fail temp test enabling if the ucode is not loaded

[Emmanuel Grumbach]

From: Luciano Coelho <luciano.coelho@intel.com>

If the ucode is not loaded, don't allow the temperature test to be
started, but allow it to be changed or stopped if already running.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index d98ee10..85eb847 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -288,6 +288,9 @@ static ssize_t iwl_dbgfs_set_nic_temperature_write(struct iwl_mvm *mvm,
 {
 	int temperature;
 
+	if (!mvm->ucode_loaded && !mvm->temperature_test)
+		return -EIO;
+
 	if (kstrtoint(buf, 10, &temperature))
 		return -EINVAL;
 	/* not a legal temperature */
-- 
1.9.1

[PATCH 08/28] iwlwifi: mvm: add MVM_FW_MCAST_FILTER_PASS_ALL option

[Emmanuel Grumbach]

From: Max Stepanov <Max.Stepanov@intel.com>

Add MVM_FW_MCAST_FILTER_PASS_ALL option to iwl-dbg-cfg.ini configuration file
to enable/disable FW multicast filtering.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h |  1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c  | 11 ++++++-----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index dd00e8f..cb48656 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -86,5 +86,6 @@
 #define IWL_MVM_BT_COEX_SYNC2SCO		1
 #define IWL_MVM_BT_COEX_CORUNNING		1
 #define IWL_MVM_BT_COEX_MPLUT			1
+#define IWL_MVM_FW_MCAST_FILTER_PASS_ALL	0
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index bcfb03c..089d7b3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1200,14 +1200,15 @@ static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	struct iwl_mcast_filter_cmd *cmd;
 	struct netdev_hw_addr *addr;
-	int addr_count = netdev_hw_addr_list_count(mc_list);
-	bool pass_all = false;
+	int addr_count;
+	bool pass_all;
 	int len;
 
-	if (addr_count > MAX_MCAST_FILTERING_ADDRESSES) {
-		pass_all = true;
+	addr_count = netdev_hw_addr_list_count(mc_list);
+	pass_all = addr_count > MAX_MCAST_FILTERING_ADDRESSES ||
+		   IWL_MVM_FW_MCAST_FILTER_PASS_ALL;
+	if (pass_all)
 		addr_count = 0;
-	}
 
 	len = roundup(sizeof(*cmd) + addr_count * ETH_ALEN, 4);
 	cmd = kzalloc(len, GFP_ATOMIC);
-- 
1.9.1

[PATCH 09/28] iwlwifi: mvm: rs: don't zero tx stats after idle

[Emmanuel Grumbach]

From: Eyal Shapira <eyal@wizery.com>

Move the tx stats to the persistent area of lq_sta to
avoid them being zeroed out every time rs reinitializes
which happens after tx idle for 5 secs for example.
The automatic zeroing out made them difficult to use.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 10 ++++++----
 drivers/net/wireless/iwlwifi/mvm/rs.h |  7 ++++---
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 94c5299..f77dfe4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -672,8 +672,10 @@ static int rs_collect_tx_data(struct iwl_lq_sta *lq_sta,
 		return -EINVAL;
 
 	if (tbl->column != RS_COLUMN_INVALID) {
-		lq_sta->tx_stats[tbl->column][scale_index].total += attempts;
-		lq_sta->tx_stats[tbl->column][scale_index].success += successes;
+		struct lq_sta_pers *pers = &lq_sta->pers;
+
+		pers->tx_stats[tbl->column][scale_index].total += attempts;
+		pers->tx_stats[tbl->column][scale_index].success += successes;
 	}
 
 	/* Select window for current tx bit rate */
@@ -3171,7 +3173,7 @@ static ssize_t rs_sta_dbgfs_drv_tx_stats_read(struct file *file,
 				 "%s,", column_name[col]);
 
 		for (rate = 0; rate < IWL_RATE_COUNT; rate++) {
-			stats = &(lq_sta->tx_stats[col][rate]);
+			stats = &(lq_sta->pers.tx_stats[col][rate]);
 			pos += scnprintf(pos, endpos - pos,
 					 "%llu/%llu,",
 					 stats->success,
@@ -3190,7 +3192,7 @@ static ssize_t rs_sta_dbgfs_drv_tx_stats_write(struct file *file,
 					       size_t count, loff_t *ppos)
 {
 	struct iwl_lq_sta *lq_sta = file->private_data;
-	memset(lq_sta->tx_stats, 0, sizeof(lq_sta->tx_stats));
+	memset(lq_sta->pers.tx_stats, 0, sizeof(lq_sta->pers.tx_stats));
 
 	return count;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index 98bb9b7..95c4b96 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -333,8 +333,6 @@ struct iwl_lq_sta {
 	bool ldpc;              /* LDPC Rx is supported by the STA */
 	enum ieee80211_band band;
 
-	struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT];
-
 	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
 	unsigned long active_legacy_rate;
 	unsigned long active_siso_rate;
@@ -362,11 +360,14 @@ struct iwl_lq_sta {
 	int tpc_reduce;
 
 	/* persistent fields - initialized only once - keep last! */
-	struct {
+	struct lq_sta_pers {
 #ifdef CONFIG_MAC80211_DEBUGFS
 		u32 dbg_fixed_rate;
 		u8 dbg_fixed_txp_reduction;
 #endif
+		u8 chains;
+		s8 chain_signal[IEEE80211_MAX_CHAINS];
+		struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT];
 		struct iwl_mvm *drv;
 	} pers;
 };
-- 
1.9.1

[PATCH 10/28] iwlwifi: mvm: disable aggregation queues in station DB in FW

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

When disabling aggregation, disable the queues in the station
DB in the firmware, otherwise we leave the tfd_queue_mask in
a wrong state after an aggregation session has been torn down.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/sta.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index dd9f3a4..666f16b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -948,8 +948,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 		}
 
 		tid_data->ssn = 0xffff;
+		tid_data->state = IWL_AGG_OFF;
+		mvm->queue_to_mac80211[txq_id] = IWL_INVALID_MAC80211_QUEUE;
+		spin_unlock_bh(&mvmsta->lock);
+
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+
+		iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false);
+
 		iwl_trans_txq_disable(mvm->trans, txq_id, true);
-		/* fall through */
+		return 0;
 	case IWL_AGG_STARTING:
 	case IWL_EMPTYING_HW_QUEUE_ADDBA:
 		/*
@@ -1003,6 +1011,8 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 		if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
 			IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
 
+		iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false);
+
 		iwl_trans_txq_disable(mvm->trans, tid_data->txq_id, true);
 	}
 
-- 
1.9.1

[PATCH 11/28] iwlwifi: trans: don't configure the set_active in SCD for dvm

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This configuration is not needed for dvm, and it actually
broke it.

Reported-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 2 ++
 drivers/net/wireless/iwlwifi/mvm/ops.c       | 1 +
 drivers/net/wireless/iwlwifi/pcie/internal.h | 2 ++
 drivers/net/wireless/iwlwifi/pcie/trans.c    | 1 +
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 6 ++++--
 5 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index c89985a..eb31648 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -377,6 +377,7 @@ enum iwl_trans_status {
  *	if unset 4k will be the RX buffer size
  * @bc_table_dword: set to true if the BC table expects the byte count to be
  *	in DWORD (as opposed to bytes)
+ * @scd_set_active: should the transport configure the SCD for HCMD queue
  * @queue_watchdog_timeout: time (in ms) after which queues
  *	are considered stuck and will trigger device restart
  * @command_names: array of command names, must be 256 entries
@@ -392,6 +393,7 @@ struct iwl_trans_config {
 
 	bool rx_buf_size_8k;
 	bool bc_table_dword;
+	bool scd_set_active;
 	unsigned int queue_watchdog_timeout;
 	const char *const *command_names;
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 87f278c..5d8c562 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -460,6 +460,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 	trans_cfg.cmd_queue = IWL_MVM_CMD_QUEUE;
 	trans_cfg.cmd_fifo = IWL_MVM_TX_FIFO_CMD;
+	trans_cfg.scd_set_active = true;
 
 	snprintf(mvm->hw->wiphy->fw_version,
 		 sizeof(mvm->hw->wiphy->fw_version),
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index a4fedc4..1aea6b6 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -257,6 +257,7 @@ iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
  * @cmd_queue - command queue number
  * @rx_buf_size_8k: 8 kB RX buffer size
  * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes)
+ * @scd_set_active: should the transport configure the SCD for HCMD queue
  * @rx_page_order: page order for receive buffer size
  * @wd_timeout: queue watchdog timeout (jiffies)
  * @reg_lock: protect hw register access
@@ -306,6 +307,7 @@ struct iwl_trans_pcie {
 
 	bool rx_buf_size_8k;
 	bool bc_table_dword;
+	bool scd_set_active;
 	u32 rx_page_order;
 
 	const char *const *command_names;
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 3076e0e..4add964 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1171,6 +1171,7 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 
 	trans_pcie->command_names = trans_cfg->command_names;
 	trans_pcie->bc_table_dword = trans_cfg->bc_table_dword;
+	trans_pcie->scd_set_active = trans_cfg->scd_set_active;
 
 	/* Initialize NAPI here - it should be before registering to mac80211
 	 * in the opmode but after the HW struct is allocated.
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index a6336b4..35fe38e 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1080,7 +1080,8 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
 		fifo = cfg->fifo;
 
 		/* Disable the scheduler prior configuring the cmd queue */
-		if (txq_id == trans_pcie->cmd_queue)
+		if (txq_id == trans_pcie->cmd_queue &&
+		    trans_pcie->scd_set_active)
 			iwl_scd_enable_set_active(trans, 0);
 
 		/* Stop this Tx queue before configuring it */
@@ -1142,7 +1143,8 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
 			       SCD_QUEUE_STTS_REG_MSK);
 
 		/* enable the scheduler for this queue (only) */
-		if (txq_id == trans_pcie->cmd_queue)
+		if (txq_id == trans_pcie->cmd_queue &&
+		    trans_pcie->scd_set_active)
 			iwl_scd_enable_set_active(trans, BIT(txq_id));
 	}
 
-- 
1.9.1

[PATCH 12/28] iwlwifi: make hw rev checking more readable

[Emmanuel Grumbach]

From: Liad Kaufman <liad.kaufman@intel.com>

Rather than ANDing with a mask - use existing macros, which
are more readable.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-csr.h    | 10 ++++++++++
 drivers/net/wireless/iwlwifi/iwl-io.c     |  2 +-
 drivers/net/wireless/iwlwifi/mvm/nvm.c    |  3 ++-
 drivers/net/wireless/iwlwifi/pcie/trans.c |  2 +-
 4 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 23d059a..3f6f015 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -295,6 +295,16 @@
 #define CSR_HW_REV_DASH(_val)          (((_val) & 0x0000003) >> 0)
 #define CSR_HW_REV_STEP(_val)          (((_val) & 0x000000C) >> 2)
 
+
+/**
+ *  hw_rev values
+ */
+enum {
+	SILICON_A_STEP = 0,
+	SILICON_B_STEP,
+};
+
+
 #define CSR_HW_REV_TYPE_MSK            (0x000FFF0)
 #define CSR_HW_REV_TYPE_5300           (0x0000020)
 #define CSR_HW_REV_TYPE_5350           (0x0000030)
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c
index 5eef4ae..7a2cbf6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.c
+++ b/drivers/net/wireless/iwlwifi/iwl-io.c
@@ -193,7 +193,7 @@ void iwl_force_nmi(struct iwl_trans *trans)
 	 * DEVICE_SET_NMI_8000B_REG - is used.
 	 */
 	if ((trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) ||
-	    ((trans->hw_rev & 0xc) == 0x0))
+	    (CSR_HW_REV_STEP(trans->hw_rev) == SILICON_A_STEP))
 		iwl_write_prph(trans, DEVICE_SET_NMI_REG, DEVICE_SET_NMI_VAL);
 	else
 		iwl_write_prph(trans, DEVICE_SET_NMI_8000B_REG,
diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c
index 4fafd4b..af07456 100644
--- a/drivers/net/wireless/iwlwifi/mvm/nvm.c
+++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c
@@ -64,6 +64,7 @@
  *****************************************************************************/
 #include <linux/firmware.h>
 #include "iwl-trans.h"
+#include "iwl-csr.h"
 #include "mvm.h"
 #include "iwl-eeprom-parse.h"
 #include "iwl-eeprom-read.h"
@@ -349,7 +350,7 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
 	/* Maximal size depends on HW family and step */
 	if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
 		max_section_size = IWL_MAX_NVM_SECTION_SIZE;
-	else if ((mvm->trans->hw_rev & 0xc) == 0) /* Family 8000 A-step */
+	else if (CSR_HW_REV_STEP(mvm->trans->hw_rev) == SILICON_A_STEP)
 		max_section_size = IWL_MAX_NVM_8000A_SECTION_SIZE;
 	else /* Family 8000 B-step */
 		max_section_size = IWL_MAX_NVM_8000B_SECTION_SIZE;
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 4add964..ae99240 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -2190,7 +2190,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 	 */
 	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
 		trans->hw_rev = (trans->hw_rev & 0xfff0) |
-				((trans->hw_rev << 2) & 0xc);
+				(CSR_HW_REV_STEP(trans->hw_rev << 2));
 
 	trans->hw_id = (pdev->device << 16) + pdev->subsystem_device;
 	snprintf(trans->hw_id_str, sizeof(trans->hw_id_str),
-- 
1.9.1

[PATCH 13/28] iwlwifi: pcie: clear command data on freeing

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

When freeing the structures used for command data, clear their
memory as they may have contained key material at some point.
Also clear the duplicated buffer when freeing it to be safe;
currently key material is never put there but that may change.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/rx.c | 2 +-
 drivers/net/wireless/iwlwifi/pcie/tx.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 702f47f..7b7e2f2 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -640,7 +640,7 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 		err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
 
 		if (reclaim) {
-			kfree(txq->entries[cmd_index].free_buf);
+			kzfree(txq->entries[cmd_index].free_buf);
 			txq->entries[cmd_index].free_buf = NULL;
 		}
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 35fe38e..eb8e298 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -620,8 +620,8 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id)
 	/* De-alloc array of command/tx buffers */
 	if (txq_id == trans_pcie->cmd_queue)
 		for (i = 0; i < txq->q.n_window; i++) {
-			kfree(txq->entries[i].cmd);
-			kfree(txq->entries[i].free_buf);
+			kzfree(txq->entries[i].cmd);
+			kzfree(txq->entries[i].free_buf);
 		}
 
 	/* De-alloc circular buffer of TFDs */
@@ -1409,7 +1409,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
 
 	out_meta->flags = cmd->flags;
 	if (WARN_ON_ONCE(txq->entries[idx].free_buf))
-		kfree(txq->entries[idx].free_buf);
+		kzfree(txq->entries[idx].free_buf);
 	txq->entries[idx].free_buf = dup_buf;
 
 	trace_iwlwifi_dev_hcmd(trans->dev, cmd, cmd_size, &out_cmd->hdr);
-- 
1.9.1

[PATCH 14/28] iwlwifi: define the non shared antenna per hardware

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The sharing model will differ in new hardware. Define the
non shared antenna based on the device so that different
devices can have different names for the non shared antenna.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c   | 3 ++-
 drivers/net/wireless/iwlwifi/iwl-8000.c   | 3 ++-
 drivers/net/wireless/iwlwifi/iwl-config.h | 2 ++
 drivers/net/wireless/iwlwifi/mvm/coex.c   | 4 ++++
 drivers/net/wireless/iwlwifi/mvm/tx.c     | 2 +-
 5 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 79c8f74..b04b885 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -131,7 +131,8 @@ static const struct iwl_ht_params iwl7000_ht_params = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.base_params = &iwl7000_base_params,			\
 	.led_mode = IWL_LED_RF_STATE,				\
-	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000
+	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000,	\
+	.non_shared_ant = ANT_A
 
 
 const struct iwl_cfg iwl7260_2ac_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index db67631..4ae8ba6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -116,7 +116,8 @@ static const struct iwl_ht_params iwl8000_ht_params = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.base_params = &iwl8000_base_params,			\
 	.led_mode = IWL_LED_RF_STATE,				\
-	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000
+	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000,	\
+	.non_shared_ant = ANT_A
 
 const struct iwl_cfg iwl8260_2n_cfg = {
 	.name = "Intel(R) Dual Band Wireless N 8260",
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 687e9e1..2ef83a3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -230,6 +230,7 @@ struct iwl_pwr_tx_backoff {
  * @max_data_size: The maximal length of the fw data section
  * @valid_tx_ant: valid transmit antenna
  * @valid_rx_ant: valid receive antenna
+ * @non_shared_ant: the antenna that is for WiFi only
  * @nvm_ver: NVM version
  * @nvm_calib_ver: NVM calibration version
  * @lib: pointer to the lib ops
@@ -262,6 +263,7 @@ struct iwl_cfg {
 	const u32 max_inst_size;
 	u8   valid_tx_ant;
 	u8   valid_rx_ant;
+	u8   non_shared_ant;
 	bool bt_shared_single_ant;
 	u16  nvm_ver;
 	u16  nvm_calib_ver;
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 6e8f3e2a..8df2021 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -1146,6 +1146,10 @@ bool iwl_mvm_bt_coex_is_mimo_allowed(struct iwl_mvm *mvm,
 
 bool iwl_mvm_bt_coex_is_shared_ant_avail(struct iwl_mvm *mvm)
 {
+	/* there is no other antenna, shared antenna is always available */
+	if (mvm->cfg->bt_shared_single_ant)
+		return true;
+
 	if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_BT_COEX_SPLIT))
 		return iwl_mvm_bt_coex_is_shared_ant_avail_old(mvm);
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index ed09194..c67296e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -213,7 +213,7 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
 
 	if (info->band == IEEE80211_BAND_2GHZ &&
 	    !iwl_mvm_bt_coex_is_shared_ant_avail(mvm))
-		rate_flags = BIT(ANT_A) << RATE_MCS_ANT_POS;
+		rate_flags = BIT(mvm->cfg->non_shared_ant) << RATE_MCS_ANT_POS;
 	else
 		rate_flags =
 			BIT(mvm->mgmt_last_antenna_idx) << RATE_MCS_ANT_POS;
-- 
1.9.1

[PATCH 15/28] iwlwifi: mvm: don't update quota in firmware too often

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

When updating quota in the firmware, it has to reset quite a bit
of internal state, which apparently can have an adverse impact on
its operation.

Avoid that by only updating the quota command when there are any
signification changes, i.e. added/removed bindings or changes in
quota that are bigger than 8 TU within a binding.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h |  1 +
 drivers/net/wireless/iwlwifi/mvm/fw.c        |  3 +++
 drivers/net/wireless/iwlwifi/mvm/mvm.h       |  2 ++
 drivers/net/wireless/iwlwifi/mvm/quota.c     | 33 +++++++++++++++++++++++-----
 4 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index cb48656..1181089 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -87,5 +87,6 @@
 #define IWL_MVM_BT_COEX_CORUNNING		1
 #define IWL_MVM_BT_COEX_MPLUT			1
 #define IWL_MVM_FW_MCAST_FILTER_PASS_ALL	0
+#define IWL_MVM_QUOTA_THRESHOLD			8
 
 #endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 21d60602..23fd711 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -454,6 +454,9 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	for (i = 0; i < IWL_MVM_STATION_COUNT; i++)
 		RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL);
 
+	/* reset quota debouncing buffer - 0xff will yield invalid data */
+	memset(&mvm->last_quota_cmd, 0xff, sizeof(mvm->last_quota_cmd));
+
 	/* Add auxiliary station for scanning */
 	ret = iwl_mvm_add_aux_sta(mvm);
 	if (ret)
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index e292de9..f05b7d7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -709,6 +709,8 @@ struct iwl_mvm {
 	 */
 	bool temperature_test;  /* Debug test temperature is enabled */
 
+	struct iwl_time_quota_cmd last_quota_cmd;
+
 #ifdef CONFIG_NL80211_TESTMODE
 	u32 noa_duration;
 	struct ieee80211_vif *noa_vif;
diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 5fd502d..1eab2f2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -175,12 +175,14 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm,
 			  struct ieee80211_vif *disabled_vif)
 {
 	struct iwl_time_quota_cmd cmd = {};
-	int i, idx, ret, num_active_macs, quota, quota_rem, n_non_lowlat;
+	int i, idx, err, num_active_macs, quota, quota_rem, n_non_lowlat;
 	struct iwl_mvm_quota_iterator_data data = {
 		.n_interfaces = {},
 		.colors = { -1, -1, -1, -1 },
 		.disabled_vif = disabled_vif,
 	};
+	struct iwl_time_quota_cmd *last = &mvm->last_quota_cmd;
+	bool send = false;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -293,15 +295,34 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm,
 
 	/* check that we have non-zero quota for all valid bindings */
 	for (i = 0; i < MAX_BINDINGS; i++) {
+		if (cmd.quotas[i].id_and_color != last->quotas[i].id_and_color)
+			send = true;
+		if (cmd.quotas[i].max_duration != last->quotas[i].max_duration)
+			send = true;
+		if (abs((int)le32_to_cpu(cmd.quotas[i].quota) -
+			(int)le32_to_cpu(last->quotas[i].quota))
+						> IWL_MVM_QUOTA_THRESHOLD)
+			send = true;
 		if (cmd.quotas[i].id_and_color == cpu_to_le32(FW_CTXT_INVALID))
 			continue;
 		WARN_ONCE(cmd.quotas[i].quota == 0,
 			  "zero quota on binding %d\n", i);
 	}
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, 0,
-				   sizeof(cmd), &cmd);
-	if (ret)
-		IWL_ERR(mvm, "Failed to send quota: %d\n", ret);
-	return ret;
+	if (send) {
+		err = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, 0,
+					   sizeof(cmd), &cmd);
+	} else {
+		/* don't send a practically unchanged command, the firmware has
+		 * to re-initialize a lot of state and that can have an adverse
+		 * impact on it
+		 */
+		err = 0;
+	}
+
+	if (err)
+		IWL_ERR(mvm, "Failed to send quota: %d\n", err);
+	else
+		mvm->last_quota_cmd = cmd;
+	return err;
 }
-- 
1.9.1

[PATCH 16/28] iwlwifi/iwl-drv.c: fix typo defualt -> default

[Emmanuel Grumbach]

From: Toralf Förster <toralf.foerster@gmx.de>

trivial, but this is user visible b/c it is in the help text

Signed-off-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index aefd94c..ed673ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -1363,7 +1363,7 @@ MODULE_PARM_DESC(fw_restart, "restart firmware in case of error (default true)")
 module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling,
 		   int, S_IRUGO);
 MODULE_PARM_DESC(antenna_coupling,
-		 "specify antenna coupling in dB (defualt: 0 dB)");
+		 "specify antenna coupling in dB (default: 0 dB)");
 
 module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO);
 MODULE_PARM_DESC(wd_disable,
-- 
1.9.1

[PATCH 17/28] iwlwifi: mvm: remove unused static inline function

[Emmanuel Grumbach]

From: Avri Altman <avri.altman@intel.com>

Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index eb31648..9eb8524 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -828,12 +828,6 @@ static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
 	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg);
 }
 
-static inline void
-iwl_trans_txq_enable_no_scd(struct iwl_trans *trans, int queue, u16 ssn)
-{
-	iwl_trans_txq_enable_cfg(trans, queue, ssn, NULL);
-}
-
 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
 						u32 txq_bm)
 {
-- 
1.9.1

[PATCH 18/28] iwlwifi: mvm: update d0i3 debugfs

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

A lot of the newer d0i3 ref additions weren't added to the
debugfs file, fix that and add a comment to remember to do
it in the future.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs.c | 12 ++++++++++++
 drivers/net/wireless/iwlwifi/mvm/mvm.h     |  2 ++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index 85eb847..95eb9a5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -1259,6 +1259,18 @@ static ssize_t iwl_dbgfs_d0i3_refs_read(struct file *file,
 	PRINT_MVM_REF(IWL_MVM_REF_P2P_CLIENT);
 	PRINT_MVM_REF(IWL_MVM_REF_AP_IBSS);
 	PRINT_MVM_REF(IWL_MVM_REF_USER);
+	PRINT_MVM_REF(IWL_MVM_REF_TX);
+	PRINT_MVM_REF(IWL_MVM_REF_TX_AGG);
+	PRINT_MVM_REF(IWL_MVM_REF_ADD_IF);
+	PRINT_MVM_REF(IWL_MVM_REF_START_AP);
+	PRINT_MVM_REF(IWL_MVM_REF_BSS_CHANGED);
+	PRINT_MVM_REF(IWL_MVM_REF_PREPARE_TX);
+	PRINT_MVM_REF(IWL_MVM_REF_PROTECT_TDLS);
+	PRINT_MVM_REF(IWL_MVM_REF_CHECK_CTKILL);
+	PRINT_MVM_REF(IWL_MVM_REF_PRPH_READ);
+	PRINT_MVM_REF(IWL_MVM_REF_PRPH_WRITE);
+	PRINT_MVM_REF(IWL_MVM_REF_NMI);
+	PRINT_MVM_REF(IWL_MVM_REF_TM_CMD);
 	PRINT_MVM_REF(IWL_MVM_REF_EXIT_WORK);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index f05b7d7..4b1db9a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -274,6 +274,8 @@ enum iwl_mvm_ref_type {
 	IWL_MVM_REF_TM_CMD,
 	IWL_MVM_REF_EXIT_WORK,
 
+	/* update debugfs.c when changing this */
+
 	IWL_MVM_REF_COUNT,
 };
 
-- 
1.9.1

[PATCH 19/28] iwlwifi: mvm: use the firmware to get the temperature during CT kill

[Emmanuel Grumbach]

From: Luciano Coelho <luciano.coelho@intel.com>

Reading the temperature directly from the hardware, without the help
of the firmware, is a complex process and is not entirely the same for
different hardware.  Also, some NICs don't easily allow access to the
sensors when the firmware is not running, which would add even more
complexity to the code.

To reduce the code complexity and to avoid code duplication between
the firmware and the driver, boot the firmware briefly to read the
current temperature while in CT kill mode.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h   |  32 +++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  34 ++-
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   3 +
 drivers/net/wireless/iwlwifi/mvm/ops.c      |   2 +
 drivers/net/wireless/iwlwifi/mvm/tt.c       | 326 +++++++---------------------
 5 files changed, 140 insertions(+), 257 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index b599b52..fbcc036 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -205,6 +205,10 @@ enum {
 	REPLY_SF_CFG_CMD = 0xd1,
 	REPLY_BEACON_FILTERING_CMD = 0xd2,
 
+	/* DTS measurements */
+	CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
+	DTS_MEASUREMENT_NOTIFICATION = 0xdd,
+
 	REPLY_DEBUG_CMD = 0xf0,
 	DEBUG_LOG_MSG = 0xf7,
 
@@ -1618,4 +1622,32 @@ struct iwl_sf_cfg_cmd {
 	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
 } __packed; /* SF_CFG_API_S_VER_2 */
 
+/* DTS measurements */
+
+enum iwl_dts_measurement_flags {
+	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
+	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
+};
+
+/**
+ * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
+ *
+ * @flags: indicates which measurements we want as specified in &enum
+ *	   iwl_dts_measurement_flags
+ */
+struct iwl_dts_measurement_cmd {
+	__le32 flags;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
+
+/**
+ * iwl_dts_measurement_notif - notification received with the measurements
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ */
+struct iwl_dts_measurement_notif {
+	__le32 temp;
+	__le32 voltage;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S */
+
 #endif /* __fw_api_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 089d7b3..5c33d2d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -815,12 +815,11 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 	mvm->rx_ba_sessions = 0;
 }
 
-static int iwl_mvm_mac_start(struct ieee80211_hw *hw)
+int __iwl_mvm_mac_start(struct iwl_mvm *mvm)
 {
-	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	int ret;
 
-	mutex_lock(&mvm->mutex);
+	lockdep_assert_held(&mvm->mutex);
 
 	/* Clean up some internal and mac80211 state on restart */
 	if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
@@ -837,6 +836,16 @@ static int iwl_mvm_mac_start(struct ieee80211_hw *hw)
 		iwl_mvm_d0i3_enable_tx(mvm, NULL);
 	}
 
+	return ret;
+}
+
+static int iwl_mvm_mac_start(struct ieee80211_hw *hw)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	int ret;
+
+	mutex_lock(&mvm->mutex);
+	ret = __iwl_mvm_mac_start(mvm);
 	mutex_unlock(&mvm->mutex);
 
 	return ret;
@@ -862,14 +871,9 @@ static void iwl_mvm_mac_restart_complete(struct ieee80211_hw *hw)
 	mutex_unlock(&mvm->mutex);
 }
 
-static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
+void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
 {
-	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
-
-	flush_work(&mvm->d0i3_exit_work);
-	flush_work(&mvm->async_handlers_wk);
-
-	mutex_lock(&mvm->mutex);
+	lockdep_assert_held(&mvm->mutex);
 
 	/* disallow low power states when the FW is down */
 	iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
@@ -891,7 +895,17 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	iwl_mvm_del_aux_sta(mvm);
 
 	mvm->ucode_loaded = false;
+}
 
+static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+
+	flush_work(&mvm->d0i3_exit_work);
+	flush_work(&mvm->async_handlers_wk);
+
+	mutex_lock(&mvm->mutex);
+	__iwl_mvm_mac_stop(mvm);
 	mutex_unlock(&mvm->mutex);
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4b1db9a..a36fa6c6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -792,6 +792,9 @@ struct iwl_rate_info {
 	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
 };
 
+void __iwl_mvm_mac_stop(struct iwl_mvm *mvm);
+int __iwl_mvm_mac_start(struct iwl_mvm *mvm);
+
 /******************
  * MVM Methods
  ******************/
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 5d8c562..9710084 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -332,6 +332,8 @@ static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(BCAST_FILTER_CMD),
 	CMD(REPLY_SF_CFG_CMD),
 	CMD(REPLY_BEACON_FILTERING_CMD),
+	CMD(CMD_DTS_MEASUREMENT_TRIGGER),
+	CMD(DTS_MEASUREMENT_NOTIFICATION),
 	CMD(REPLY_THERMAL_MNG_BACKOFF),
 	CMD(MAC_PM_POWER_TABLE),
 	CMD(BT_COEX_CI),
diff --git a/drivers/net/wireless/iwlwifi/mvm/tt.c b/drivers/net/wireless/iwlwifi/mvm/tt.c
index c3e1fe4..c750ca7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tt.c
@@ -69,275 +69,99 @@
 #include "iwl-csr.h"
 #include "iwl-prph.h"
 
-#define OTP_DTS_DIODE_DEVIATION 96 /*in words*/
-/* VBG - Voltage Band Gap error data (temperature offset) */
-#define OTP_WP_DTS_VBG			(OTP_DTS_DIODE_DEVIATION + 2)
-#define MEAS_VBG_MIN_VAL		2300
-#define MEAS_VBG_MAX_VAL		3000
-#define MEAS_VBG_DEFAULT_VAL		2700
-#define DTS_DIODE_VALID(flags)		(flags & DTS_DIODE_REG_FLAGS_PASS_ONCE)
-#define MIN_TEMPERATURE			0
-#define MAX_TEMPERATURE			125
-#define TEMPERATURE_ERROR		(MAX_TEMPERATURE + 1)
-#define PTAT_DIGITAL_VALUE_MIN_VALUE	0
-#define PTAT_DIGITAL_VALUE_MAX_VALUE	0xFF
-#define DTS_VREFS_NUM			5
-static inline u32 DTS_DIODE_GET_VREFS_ID(u32 flags)
-{
-	return (flags & DTS_DIODE_REG_FLAGS_VREFS_ID) >>
-					DTS_DIODE_REG_FLAGS_VREFS_ID_POS;
-}
+#define IWL_MVM_TEMP_NOTIF_WAIT_TIMEOUT	HZ
 
-#define CALC_VREFS_MIN_DIFF	43
-#define CALC_VREFS_MAX_DIFF	51
-#define CALC_LUT_SIZE		(1 + CALC_VREFS_MAX_DIFF - CALC_VREFS_MIN_DIFF)
-#define CALC_LUT_INDEX_OFFSET	CALC_VREFS_MIN_DIFF
-#define CALC_TEMPERATURE_RESULT_SHIFT_OFFSET	23
-
-/*
- * @digital_value: The diode's digital-value sampled (temperature/voltage)
- * @vref_low: The lower voltage-reference (the vref just below the diode's
- *	sampled digital-value)
- * @vref_high: The higher voltage-reference (the vref just above the diode's
- *	sampled digital-value)
- * @flags: bits[1:0]: The ID of the Vrefs pair (lowVref,highVref)
- *	bits[6:2]: Reserved.
- *	bits[7:7]: Indicates completion of at least 1 successful sample
- *	since last DTS reset.
- */
-struct iwl_mvm_dts_diode_bits {
-	u8 digital_value;
-	u8 vref_low;
-	u8 vref_high;
-	u8 flags;
-} __packed;
-
-union dts_diode_results {
-	u32 reg_value;
-	struct iwl_mvm_dts_diode_bits bits;
-} __packed;
-
-static s16 iwl_mvm_dts_get_volt_band_gap(struct iwl_mvm *mvm)
+static void iwl_mvm_enter_ctkill(struct iwl_mvm *mvm)
 {
-	struct iwl_nvm_section calib_sec;
-	const __le16 *calib;
-	u16 vbg;
-
-	/* TODO: move parsing to NVM code */
-	calib_sec = mvm->nvm_sections[NVM_SECTION_TYPE_CALIBRATION];
-	calib = (__le16 *)calib_sec.data;
+	u32 duration = mvm->thermal_throttle.params->ct_kill_duration;
 
-	vbg = le16_to_cpu(calib[OTP_WP_DTS_VBG]);
+	if (test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status))
+		return;
 
-	if (vbg < MEAS_VBG_MIN_VAL || vbg > MEAS_VBG_MAX_VAL)
-		vbg = MEAS_VBG_DEFAULT_VAL;
+	IWL_ERR(mvm, "Enter CT Kill\n");
+	iwl_mvm_set_hw_ctkill_state(mvm, true);
 
-	return vbg;
+	/* Don't schedule an exit work if we're in test mode, since
+	 * the temperature will not change unless we manually set it
+	 * again (or disable testing).
+	 */
+	if (!mvm->temperature_test)
+		schedule_delayed_work(&mvm->thermal_throttle.ct_kill_exit,
+				      round_jiffies_relative(duration * HZ));
 }
 
-static u16 iwl_mvm_dts_get_ptat_deviation_offset(struct iwl_mvm *mvm)
+static void iwl_mvm_exit_ctkill(struct iwl_mvm *mvm)
 {
-	const u8 *calib;
-	u8 ptat, pa1, pa2, median;
-
-	/* TODO: move parsing to NVM code */
-	calib = mvm->nvm_sections[NVM_SECTION_TYPE_CALIBRATION].data;
-	ptat = calib[OTP_DTS_DIODE_DEVIATION * 2];
-	pa1 = calib[OTP_DTS_DIODE_DEVIATION * 2 + 1];
-	pa2 = calib[OTP_DTS_DIODE_DEVIATION * 2 + 2];
-
-	/* get the median: */
-	if (ptat > pa1) {
-		if (ptat > pa2)
-			median = (pa1 > pa2) ? pa1 : pa2;
-		else
-			median = ptat;
-	} else {
-		if (pa1 > pa2)
-			median = (ptat > pa2) ? ptat : pa2;
-		else
-			median = pa1;
-	}
+	if (!test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status))
+		return;
 
-	return ptat - median;
+	IWL_ERR(mvm, "Exit CT Kill\n");
+	iwl_mvm_set_hw_ctkill_state(mvm, false);
 }
 
-static u8 iwl_mvm_dts_calibrate_ptat_deviation(struct iwl_mvm *mvm, u8 value)
+static bool iwl_mvm_temp_notif(struct iwl_notif_wait_data *notif_wait,
+			       struct iwl_rx_packet *pkt, void *data)
 {
-	/* Calibrate the PTAT digital value, based on PTAT deviation data: */
-	s16 new_val = value - iwl_mvm_dts_get_ptat_deviation_offset(mvm);
+	struct iwl_mvm *mvm =
+		container_of(notif_wait, struct iwl_mvm, notif_wait);
+	int *temp = data;
+	struct iwl_dts_measurement_notif *notif;
+	int len = iwl_rx_packet_payload_len(pkt);
+
+	if (WARN_ON_ONCE(len != sizeof(*notif))) {
+		IWL_ERR(mvm, "Invalid DTS_MEASUREMENT_NOTIFICATION\n");
+		return true;
+	}
 
-	if (new_val > PTAT_DIGITAL_VALUE_MAX_VALUE)
-		new_val = PTAT_DIGITAL_VALUE_MAX_VALUE;
-	else if (new_val < PTAT_DIGITAL_VALUE_MIN_VALUE)
-		new_val = PTAT_DIGITAL_VALUE_MIN_VALUE;
+	notif = (void *)pkt->data;
 
-	return new_val;
-}
+	*temp = le32_to_cpu(notif->temp);
 
-static bool dts_get_adjacent_vrefs(struct iwl_mvm *mvm,
-				   union dts_diode_results *avg_ptat)
-{
-	u8 vrefs_results[DTS_VREFS_NUM];
-	u8 low_vref_index = 0, flags;
-	u32 reg;
-
-	reg = iwl_read_prph(mvm->trans, DTSC_VREF_AVG);
-	memcpy(vrefs_results, &reg, sizeof(reg));
-	reg = iwl_read_prph(mvm->trans, DTSC_VREF5_AVG);
-	vrefs_results[4] = reg & 0xff;
-
-	if (avg_ptat->bits.digital_value < vrefs_results[0] ||
-	    avg_ptat->bits.digital_value > vrefs_results[4])
-		return false;
-
-	if (avg_ptat->bits.digital_value > vrefs_results[3])
-		low_vref_index = 3;
-	else if (avg_ptat->bits.digital_value > vrefs_results[2])
-		low_vref_index = 2;
-	else if (avg_ptat->bits.digital_value > vrefs_results[1])
-		low_vref_index = 1;
-
-	avg_ptat->bits.vref_low  = vrefs_results[low_vref_index];
-	avg_ptat->bits.vref_high = vrefs_results[low_vref_index + 1];
-	flags = avg_ptat->bits.flags;
-	avg_ptat->bits.flags =
-		(flags & ~DTS_DIODE_REG_FLAGS_VREFS_ID) |
-		(low_vref_index & DTS_DIODE_REG_FLAGS_VREFS_ID);
-	return true;
-}
+	/* shouldn't be negative, but since it's s32, make sure it isn't */
+	if (WARN_ON_ONCE(*temp < 0))
+		*temp = 0;
 
-/*
- * return true it the results are valid, and false otherwise.
- */
-static bool dts_read_ptat_avg_results(struct iwl_mvm *mvm,
-				      union dts_diode_results *avg_ptat)
-{
-	u32 reg;
-	u8 tmp;
-
-	/* fill the diode value and pass_once with avg-reg results */
-	reg = iwl_read_prph(mvm->trans, DTSC_PTAT_AVG);
-	reg &= DTS_DIODE_REG_DIG_VAL | DTS_DIODE_REG_PASS_ONCE;
-	avg_ptat->reg_value = reg;
-
-	/* calibrate the PTAT digital value */
-	tmp = avg_ptat->bits.digital_value;
-	tmp = iwl_mvm_dts_calibrate_ptat_deviation(mvm, tmp);
-	avg_ptat->bits.digital_value = tmp;
-
-	/*
-	 * fill vrefs fields, based on the avgVrefs results
-	 * and the diode value
-	 */
-	return dts_get_adjacent_vrefs(mvm, avg_ptat) &&
-		DTS_DIODE_VALID(avg_ptat->bits.flags);
+	IWL_DEBUG_TEMP(mvm, "DTS_MEASUREMENT_NOTIFICATION - %d\n", *temp);
+	return true;
 }
 
-static s32 calculate_nic_temperature(union dts_diode_results avg_ptat,
-				     u16 volt_band_gap)
+static int iwl_mvm_get_temp_cmd(struct iwl_mvm *mvm)
 {
-	u32 tmp_result;
-	u8 vrefs_diff;
-	/*
-	 * For temperature calculation (at the end, shift right by 23)
-	 * LUT[(D2-D1)] = ROUND{ 2^23 / ((D2-D1)*9*10) }
-	 * (D2-D1) ==   43    44    45    46    47    48    49    50    51
-	 */
-	static const u16 calc_lut[CALC_LUT_SIZE] = {
-		2168, 2118, 2071, 2026, 1983, 1942, 1902, 1864, 1828,
+	struct iwl_dts_measurement_cmd cmd = {
+		.flags = cpu_to_le32(DTS_TRIGGER_CMD_FLAGS_TEMP),
 	};
 
-	/*
-	 * The diff between the high and low voltage-references is assumed
-	 * to be strictly be in range of [60,68]
-	 */
-	vrefs_diff = avg_ptat.bits.vref_high - avg_ptat.bits.vref_low;
-
-	if (vrefs_diff < CALC_VREFS_MIN_DIFF ||
-	    vrefs_diff > CALC_VREFS_MAX_DIFF)
-		return TEMPERATURE_ERROR;
-
-	/* calculate the result: */
-	tmp_result =
-		vrefs_diff * (DTS_DIODE_GET_VREFS_ID(avg_ptat.bits.flags) + 9);
-	tmp_result += avg_ptat.bits.digital_value;
-	tmp_result -= avg_ptat.bits.vref_high;
-
-	/* multiply by the LUT value (based on the diff) */
-	tmp_result *= calc_lut[vrefs_diff - CALC_LUT_INDEX_OFFSET];
-
-	/*
-	 * Get the BandGap (the voltage refereces source) error data
-	 * (temperature offset)
-	 */
-	tmp_result *= volt_band_gap;
-
-	/*
-	 * here, tmp_result value can be up to 32-bits. We want to right-shift
-	 * it *without* sign-extend.
-	 */
-	tmp_result = tmp_result >> CALC_TEMPERATURE_RESULT_SHIFT_OFFSET;
-
-	/*
-	 * at this point, tmp_result should be in the range:
-	 * 200 <= tmp_result <= 365
-	 */
-	return (s16)tmp_result - 240;
-}
-
-static s32 check_nic_temperature(struct iwl_mvm *mvm)
-{
-	u16 volt_band_gap;
-	union dts_diode_results avg_ptat;
-
-	volt_band_gap = iwl_mvm_dts_get_volt_band_gap(mvm);
-
-	/* disable DTS */
-	iwl_write_prph(mvm->trans, SHR_MISC_WFM_DTS_EN, 0);
-
-	/* SV initialization */
-	iwl_write_prph(mvm->trans, SHR_MISC_WFM_DTS_EN, 1);
-	iwl_write_prph(mvm->trans, DTSC_CFG_MODE,
-		       DTSC_CFG_MODE_PERIODIC);
-
-	/* wait for results */
-	msleep(100);
-	if (!dts_read_ptat_avg_results(mvm, &avg_ptat))
-		return TEMPERATURE_ERROR;
-
-	/* disable DTS */
-	iwl_write_prph(mvm->trans, SHR_MISC_WFM_DTS_EN, 0);
-
-	return calculate_nic_temperature(avg_ptat, volt_band_gap);
+	return iwl_mvm_send_cmd_pdu(mvm, CMD_DTS_MEASUREMENT_TRIGGER, 0,
+				    sizeof(cmd), &cmd);
 }
 
-static void iwl_mvm_enter_ctkill(struct iwl_mvm *mvm)
+static int iwl_mvm_get_temp(struct iwl_mvm *mvm)
 {
-	u32 duration = mvm->thermal_throttle.params->ct_kill_duration;
+	struct iwl_notification_wait wait_temp_notif;
+	static const u8 temp_notif[] = { DTS_MEASUREMENT_NOTIFICATION };
+	int ret, temp;
 
-	if (test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status))
-		return;
+	lockdep_assert_held(&mvm->mutex);
 
-	IWL_ERR(mvm, "Enter CT Kill\n");
-	iwl_mvm_set_hw_ctkill_state(mvm, true);
+	iwl_init_notification_wait(&mvm->notif_wait, &wait_temp_notif,
+				   temp_notif, ARRAY_SIZE(temp_notif),
+				   iwl_mvm_temp_notif, &temp);
 
-	/* Don't schedule an exit work if we're in test mode, since
-	 * the temperature will not change unless we manually set it
-	 * again (or disable testing).
-	 */
-	if (!mvm->temperature_test)
-		schedule_delayed_work(&mvm->thermal_throttle.ct_kill_exit,
-				      round_jiffies_relative(duration * HZ));
-}
+	ret = iwl_mvm_get_temp_cmd(mvm);
+	if (ret) {
+		IWL_ERR(mvm, "Failed to get the temperature (err=%d)\n", ret);
+		iwl_remove_notification(&mvm->notif_wait, &wait_temp_notif);
+		return ret;
+	}
 
-static void iwl_mvm_exit_ctkill(struct iwl_mvm *mvm)
-{
-	if (!test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status))
-		return;
+	ret = iwl_wait_notification(&mvm->notif_wait, &wait_temp_notif,
+				    IWL_MVM_TEMP_NOTIF_WAIT_TIMEOUT);
+	if (ret) {
+		IWL_ERR(mvm, "Getting the temperature timed out\n");
+		return ret;
+	}
 
-	IWL_ERR(mvm, "Exit CT Kill\n");
-	iwl_mvm_set_hw_ctkill_state(mvm, false);
+	return temp;
 }
 
 static void check_exit_ctkill(struct work_struct *work)
@@ -352,28 +176,36 @@ static void check_exit_ctkill(struct work_struct *work)
 
 	duration = tt->params->ct_kill_duration;
 
+	mutex_lock(&mvm->mutex);
+
+	if (__iwl_mvm_mac_start(mvm))
+		goto reschedule;
+
 	/* make sure the device is available for direct read/writes */
-	if (iwl_mvm_ref_sync(mvm, IWL_MVM_REF_CHECK_CTKILL))
+	if (iwl_mvm_ref_sync(mvm, IWL_MVM_REF_CHECK_CTKILL)) {
+		__iwl_mvm_mac_stop(mvm);
 		goto reschedule;
+	}
 
-	iwl_trans_start_hw(mvm->trans);
-	temp = check_nic_temperature(mvm);
-	iwl_trans_stop_device(mvm->trans);
+	temp = iwl_mvm_get_temp(mvm);
 
 	iwl_mvm_unref(mvm, IWL_MVM_REF_CHECK_CTKILL);
 
-	if (temp < MIN_TEMPERATURE || temp > MAX_TEMPERATURE) {
-		IWL_DEBUG_TEMP(mvm, "Failed to measure NIC temperature\n");
+	__iwl_mvm_mac_stop(mvm);
+
+	if (temp < 0)
 		goto reschedule;
-	}
+
 	IWL_DEBUG_TEMP(mvm, "NIC temperature: %d\n", temp);
 
 	if (temp <= tt->params->ct_kill_exit) {
+		mutex_unlock(&mvm->mutex);
 		iwl_mvm_exit_ctkill(mvm);
 		return;
 	}
 
 reschedule:
+	mutex_unlock(&mvm->mutex);
 	schedule_delayed_work(&mvm->thermal_throttle.ct_kill_exit,
 			      round_jiffies(duration * HZ));
 }
-- 
1.9.1

[PATCH 20/28] iwlwifi: mvm: allow to collect debug data when restart is disabled

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In some testing configuration, the firmware restart flow is
not enabled. Allow to collect logs even in this case.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 14 ++++++--------
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |  6 ++++++
 drivers/net/wireless/iwlwifi/mvm/ops.c      | 15 +++++++++++++++
 3 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 5c33d2d..e4d62f2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -670,8 +670,9 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac,
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-static void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm)
+void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm)
 {
+	static char *env[] = { "DRIVER=iwlwifi", "EVENT=error_dump", NULL };
 	struct iwl_fw_error_dump_file *dump_file;
 	struct iwl_fw_error_dump_data *dump_data;
 	struct iwl_fw_error_dump_info *dump_info;
@@ -763,20 +764,16 @@ static void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm)
 		file_len += fw_error_dump->trans_ptr->len;
 	dump_file->file_len = cpu_to_le32(file_len);
 	mvm->fw_error_dump = fw_error_dump;
+
+	/* notify the userspace about the error we had */
+	kobject_uevent_env(&mvm->hw->wiphy->dev.kobj, KOBJ_CHANGE, env);
 }
 #endif
 
 static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 {
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	static char *env[] = { "DRIVER=iwlwifi", "EVENT=error_dump", NULL };
-
 	iwl_mvm_fw_error_dump(mvm);
 
-	/* notify the userspace about the error we had */
-	kobject_uevent_env(&mvm->hw->wiphy->dev.kobj, KOBJ_CHANGE, env);
-#endif
-
 	iwl_trans_stop_device(mvm->trans);
 
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
@@ -903,6 +900,7 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 
 	flush_work(&mvm->d0i3_exit_work);
 	flush_work(&mvm->async_handlers_wk);
+	flush_work(&mvm->fw_error_dump_wk);
 
 	mutex_lock(&mvm->mutex);
 	__iwl_mvm_mac_stop(mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index a36fa6c6..1fdebb8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -651,6 +651,7 @@ struct iwl_mvm {
 
 	/* -1 for always, 0 for never, >0 for that many times */
 	s8 restart_fw;
+	struct work_struct fw_error_dump_wk;
 	struct iwl_mvm_dump_ptrs *fw_error_dump;
 
 #ifdef CONFIG_IWLWIFI_LEDS
@@ -1162,5 +1163,10 @@ int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 int iwl_mvm_tdls_sta_count(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 
 void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm);
+#else
+static inline void iwl_mvm_fw_error_dump(struct iwl_mvm *mvm) {}
+#endif
 
 #endif /* __IWL_MVM_H__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 9710084..f887779 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -366,6 +366,8 @@ static u32 calc_min_backoff(struct iwl_trans *trans, const struct iwl_cfg *cfg)
 	return 0;
 }
 
+static void iwl_mvm_fw_error_dump_wk(struct work_struct *work);
+
 static struct iwl_op_mode *
 iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 		      const struct iwl_fw *fw, struct dentry *dbgfs_dir)
@@ -433,6 +435,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	INIT_WORK(&mvm->roc_done_wk, iwl_mvm_roc_done_wk);
 	INIT_WORK(&mvm->sta_drained_wk, iwl_mvm_sta_drained_wk);
 	INIT_WORK(&mvm->d0i3_exit_work, iwl_mvm_d0i3_exit_work);
+	INIT_WORK(&mvm->fw_error_dump_wk, iwl_mvm_fw_error_dump_wk);
 
 	spin_lock_init(&mvm->d0i3_tx_lock);
 	spin_lock_init(&mvm->refs_lock);
@@ -784,6 +787,16 @@ static void iwl_mvm_reprobe_wk(struct work_struct *wk)
 	module_put(THIS_MODULE);
 }
 
+static void iwl_mvm_fw_error_dump_wk(struct work_struct *work)
+{
+	struct iwl_mvm *mvm =
+		container_of(work, struct iwl_mvm, fw_error_dump_wk);
+
+	mutex_lock(&mvm->mutex);
+	iwl_mvm_fw_error_dump(mvm);
+	mutex_unlock(&mvm->mutex);
+}
+
 void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error)
 {
 	iwl_abort_notification_waits(&mvm->notif_wait);
@@ -849,6 +862,8 @@ void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error)
 		if (fw_error && mvm->restart_fw > 0)
 			mvm->restart_fw--;
 		ieee80211_restart_hw(mvm->hw);
+	} else if (fw_error) {
+		schedule_work(&mvm->fw_error_dump_wk);
 	}
 }
 
-- 
1.9.1

[PATCH 21/28] iwlwifi: mvm: fix quota update avoidance

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

When not updating the quota, the new command shouldn't be stored
as otherwise slowly drifting quota would never update the firmware.
Fix this by storing the command only when it was also sent.

Since the error message also only makes sense when attempting to
send the command, just short-circuit the function when there's no
need to send the command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/quota.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c
index 1eab2f2..dbb2594 100644
--- a/drivers/net/wireless/iwlwifi/mvm/quota.c
+++ b/drivers/net/wireless/iwlwifi/mvm/quota.c
@@ -309,17 +309,16 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm,
 			  "zero quota on binding %d\n", i);
 	}
 
-	if (send) {
-		err = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, 0,
-					   sizeof(cmd), &cmd);
-	} else {
+	if (!send) {
 		/* don't send a practically unchanged command, the firmware has
 		 * to re-initialize a lot of state and that can have an adverse
 		 * impact on it
 		 */
-		err = 0;
+		return 0;
 	}
 
+	err = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, 0, sizeof(cmd), &cmd);
+
 	if (err)
 		IWL_ERR(mvm, "Failed to send quota: %d\n", err);
 	else
-- 
1.9.1

[PATCH 22/28] iwlwifi: mvm: reduce active dwell time

[Emmanuel Grumbach]

From: David Spinadel <david.spinadel@intel.com>

Reduce basic active dwell time from 30 ms on 2.4 GHz and 20 on 5.2 to
20 on 2.4 and 10 on 5.2.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/scan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index bf9c63d..09545f2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -160,8 +160,8 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_ssid_ie *cmd_ssid,
 static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids)
 {
 	if (band == IEEE80211_BAND_2GHZ)
-		return 30  + 3 * (n_ssids + 1);
-	return 20  + 2 * (n_ssids + 1);
+		return 20  + 3 * (n_ssids + 1);
+	return 10  + 2 * (n_ssids + 1);
 }
 
 static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band)
-- 
1.9.1

[PATCH 23/28] iwlwifi: mvm: update QoS parameters when they change

[Emmanuel Grumbach]

From: Johannes Berg <johannes.berg@intel.com>

The QoS parameters can change during the lifetime of the BSS,
and more importantly hostapd only sets up the correct ones
after having started the AP/GO. Resend the MAC context when
the parameters change, with the updated parameters.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index e4d62f2..56901f8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1739,7 +1739,7 @@ iwl_mvm_bss_info_changed_ap_ibss(struct iwl_mvm *mvm,
 		return;
 
 	if (changes & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_HT |
-		       BSS_CHANGED_BANDWIDTH) &&
+		       BSS_CHANGED_BANDWIDTH | BSS_CHANGED_QOS) &&
 	    iwl_mvm_mac_ctxt_changed(mvm, vif, false, NULL))
 		IWL_ERR(mvm, "failed to update MAC %pM\n", vif->addr);
 
-- 
1.9.1

[PATCH 24/28] iwlwifi: mvm: move TDLS code to separate file

[Emmanuel Grumbach]

From: Arik Nemtsov <arik@wizery.com>

The upcoming TDLS channel-switch functionality is big enough to warrant
a separate file. Move existing related functions to the new file.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/Makefile   |   2 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  85 ----------------
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   5 +
 drivers/net/wireless/iwlwifi/mvm/tdls.c     | 149 ++++++++++++++++++++++++++++
 4 files changed, 155 insertions(+), 86 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/tdls.c

diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index a282359..2d7c3ea 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -3,7 +3,7 @@ iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o
 iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
 iwlmvm-y += power.o coex.o coex_legacy.o
-iwlmvm-y += tt.o offloading.o
+iwlmvm-y += tt.o offloading.o tdls.o
 iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o debugfs-vif.o
 iwlmvm-$(CONFIG_IWLWIFI_LEDS) += led.o
 iwlmvm-$(CONFIG_PM_SLEEP) += d3.o
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 56901f8..a3bb4a0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1420,28 +1420,6 @@ static inline int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm,
 }
 #endif
 
-static void iwl_mvm_teardown_tdls_peers(struct iwl_mvm *mvm)
-{
-	struct ieee80211_sta *sta;
-	struct iwl_mvm_sta *mvmsta;
-	int i;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	for (i = 0; i < IWL_MVM_STATION_COUNT; i++) {
-		sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i],
-						lockdep_is_held(&mvm->mutex));
-		if (!sta || IS_ERR(sta) || !sta->tdls)
-			continue;
-
-		mvmsta = iwl_mvm_sta_from_mac80211(sta);
-		ieee80211_tdls_oper_request(mvmsta->vif, sta->addr,
-				NL80211_TDLS_TEARDOWN,
-				WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED,
-				GFP_KERNEL);
-	}
-}
-
 static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 					     struct ieee80211_vif *vif,
 					     struct ieee80211_bss_conf *bss_conf,
@@ -1970,48 +1948,6 @@ static void iwl_mvm_sta_pre_rcu_remove(struct ieee80211_hw *hw,
 	mutex_unlock(&mvm->mutex);
 }
 
-int iwl_mvm_tdls_sta_count(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
-{
-	struct ieee80211_sta *sta;
-	struct iwl_mvm_sta *mvmsta;
-	int count = 0;
-	int i;
-
-	lockdep_assert_held(&mvm->mutex);
-
-	for (i = 0; i < IWL_MVM_STATION_COUNT; i++) {
-		sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i],
-						lockdep_is_held(&mvm->mutex));
-		if (!sta || IS_ERR(sta) || !sta->tdls)
-			continue;
-
-		if (vif) {
-			mvmsta = iwl_mvm_sta_from_mac80211(sta);
-			if (mvmsta->vif != vif)
-				continue;
-		}
-
-		count++;
-	}
-
-	return count;
-}
-
-static void iwl_mvm_recalc_tdls_state(struct iwl_mvm *mvm,
-				      struct ieee80211_vif *vif,
-				      bool sta_added)
-{
-	int tdls_sta_cnt = iwl_mvm_tdls_sta_count(mvm, vif);
-
-	/*
-	 * Disable ps when the first TDLS sta is added and re-enable it
-	 * when the last TDLS sta is removed
-	 */
-	if ((tdls_sta_cnt == 1 && sta_added) ||
-	    (tdls_sta_cnt == 0 && !sta_added))
-		iwl_mvm_power_update_mac(mvm);
-}
-
 static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_sta *sta,
@@ -2185,27 +2121,6 @@ static void iwl_mvm_mac_mgd_prepare_tx(struct ieee80211_hw *hw,
 	iwl_mvm_unref(mvm, IWL_MVM_REF_PREPARE_TX);
 }
 
-static void iwl_mvm_mac_mgd_protect_tdls_discover(struct ieee80211_hw *hw,
-						  struct ieee80211_vif *vif)
-{
-	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
-	u32 duration = 2 * vif->bss_conf.dtim_period * vif->bss_conf.beacon_int;
-
-	/*
-	 * iwl_mvm_protect_session() reads directly from the device
-	 * (the system time), so make sure it is available.
-	 */
-	if (iwl_mvm_ref_sync(mvm, IWL_MVM_REF_PROTECT_TDLS))
-		return;
-
-	mutex_lock(&mvm->mutex);
-	/* Protect the session to hear the TDLS setup response on the channel */
-	iwl_mvm_protect_session(mvm, vif, duration, duration, 100, true);
-	mutex_unlock(&mvm->mutex);
-
-	iwl_mvm_unref(mvm, IWL_MVM_REF_PROTECT_TDLS);
-}
-
 static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif,
 					struct cfg80211_sched_scan_request *req,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 1fdebb8..6eb1f85 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -1161,6 +1161,11 @@ int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 
 /* TDLS */
 int iwl_mvm_tdls_sta_count(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+void iwl_mvm_teardown_tdls_peers(struct iwl_mvm *mvm);
+void iwl_mvm_recalc_tdls_state(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+			       bool sta_added);
+void iwl_mvm_mac_mgd_protect_tdls_discover(struct ieee80211_hw *hw,
+					   struct ieee80211_vif *vif);
 
 void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
diff --git a/drivers/net/wireless/iwlwifi/mvm/tdls.c b/drivers/net/wireless/iwlwifi/mvm/tdls.c
new file mode 100644
index 0000000..66c82df
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/tdls.c
@@ -0,0 +1,149 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2014 Intel Mobile Communications GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Intel Mobile Communications GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include "mvm.h"
+#include "time-event.h"
+
+void iwl_mvm_teardown_tdls_peers(struct iwl_mvm *mvm)
+{
+	struct ieee80211_sta *sta;
+	struct iwl_mvm_sta *mvmsta;
+	int i;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	for (i = 0; i < IWL_MVM_STATION_COUNT; i++) {
+		sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i],
+						lockdep_is_held(&mvm->mutex));
+		if (!sta || IS_ERR(sta) || !sta->tdls)
+			continue;
+
+		mvmsta = iwl_mvm_sta_from_mac80211(sta);
+		ieee80211_tdls_oper_request(mvmsta->vif, sta->addr,
+				NL80211_TDLS_TEARDOWN,
+				WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED,
+				GFP_KERNEL);
+	}
+}
+
+int iwl_mvm_tdls_sta_count(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
+{
+	struct ieee80211_sta *sta;
+	struct iwl_mvm_sta *mvmsta;
+	int count = 0;
+	int i;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	for (i = 0; i < IWL_MVM_STATION_COUNT; i++) {
+		sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[i],
+						lockdep_is_held(&mvm->mutex));
+		if (!sta || IS_ERR(sta) || !sta->tdls)
+			continue;
+
+		if (vif) {
+			mvmsta = iwl_mvm_sta_from_mac80211(sta);
+			if (mvmsta->vif != vif)
+				continue;
+		}
+
+		count++;
+	}
+
+	return count;
+}
+
+void iwl_mvm_recalc_tdls_state(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+			       bool sta_added)
+{
+	int tdls_sta_cnt = iwl_mvm_tdls_sta_count(mvm, vif);
+
+	/*
+	 * Disable ps when the first TDLS sta is added and re-enable it
+	 * when the last TDLS sta is removed
+	 */
+	if ((tdls_sta_cnt == 1 && sta_added) ||
+	    (tdls_sta_cnt == 0 && !sta_added))
+		iwl_mvm_power_update_mac(mvm);
+}
+
+void iwl_mvm_mac_mgd_protect_tdls_discover(struct ieee80211_hw *hw,
+					   struct ieee80211_vif *vif)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	u32 duration = 2 * vif->bss_conf.dtim_period * vif->bss_conf.beacon_int;
+
+	/*
+	 * iwl_mvm_protect_session() reads directly from the device
+	 * (the system time), so make sure it is available.
+	 */
+	if (iwl_mvm_ref_sync(mvm, IWL_MVM_REF_PROTECT_TDLS))
+		return;
+
+	mutex_lock(&mvm->mutex);
+	/* Protect the session to hear the TDLS setup response on the channel */
+	iwl_mvm_protect_session(mvm, vif, duration, duration, 100, true);
+	mutex_unlock(&mvm->mutex);
+
+	iwl_mvm_unref(mvm, IWL_MVM_REF_PROTECT_TDLS);
+}
-- 
1.9.1

[PATCH 25/28] iwlwifi: mvm: Fix skip over dtim configuration in d0i3

[Emmanuel Grumbach]

From: Avri Altman <avri.altman@intel.com>

There was some confusion concerning the units of the beacon interval.
The driver assumed that it was in msec where it was in TU - so fix that.
Skip over dtim was capped by 300TU where it should be by 306TU.
It should also be subjected to several conditions:
Not a DFS channel, dtim period < 10, and the multicast wake-lock
is off.  Concerning multicast lock - there is an implementation gap
in the supplicant, so just leave a TODO.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 48 +++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 5a29c19..ff842ee 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -286,12 +286,28 @@ static bool iwl_mvm_power_allow_uapsd(struct iwl_mvm *mvm,
 	return true;
 }
 
+static bool iwl_mvm_power_is_radar(struct ieee80211_vif *vif)
+{
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	struct ieee80211_channel *chan;
+	bool radar_detect = false;
+
+	rcu_read_lock();
+	chanctx_conf = rcu_dereference(vif->chanctx_conf);
+	WARN_ON(!chanctx_conf);
+	if (chanctx_conf) {
+		chan = chanctx_conf->def.chan;
+		radar_detect = chan->flags & IEEE80211_CHAN_RADAR;
+	}
+	rcu_read_unlock();
+
+	return radar_detect;
+}
+
 static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 				    struct ieee80211_vif *vif,
 				    struct iwl_mac_power_cmd *cmd)
 {
-	struct ieee80211_chanctx_conf *chanctx_conf;
-	struct ieee80211_channel *chan;
 	int dtimper, dtimper_msec;
 	int keep_alive;
 	bool radar_detect = false;
@@ -333,14 +349,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	}
 
 	/* Check if radar detection is required on current channel */
-	rcu_read_lock();
-	chanctx_conf = rcu_dereference(vif->chanctx_conf);
-	WARN_ON(!chanctx_conf);
-	if (chanctx_conf) {
-		chan = chanctx_conf->def.chan;
-		radar_detect = chan->flags & IEEE80211_CHAN_RADAR;
-	}
-	rcu_read_unlock();
+	radar_detect = iwl_mvm_power_is_radar(vif);
 
 	/* Check skip over DTIM conditions */
 	if (!radar_detect && (dtimper <= 10) &&
@@ -961,17 +970,22 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
 
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	if (enable) {
-		/* configure skip over dtim up to 300 msec */
+		/* configure skip over dtim up to 306TU - 314 msec */
 		int dtimper = vif->bss_conf.dtim_period ?: 1;
-		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
+		int dtimper_tu = dtimper * vif->bss_conf.beacon_int;
+		bool radar_detect = iwl_mvm_power_is_radar(vif);
 
-		if (WARN_ON(!dtimper_msec))
+		if (WARN_ON(!dtimper_tu))
 			return 0;
 
-		cmd.skip_dtim_periods = 300 / dtimper_msec;
-		if (cmd.skip_dtim_periods)
-			cmd.flags |=
-				cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK);
+		/* Check skip over DTIM conditions */
+		/* TODO: check that multicast wake lock is off */
+		if (!radar_detect && (dtimper < 10)) {
+			cmd.skip_dtim_periods = 306 / dtimper_tu;
+			if (cmd.skip_dtim_periods)
+				cmd.flags |= cpu_to_le16(
+					POWER_FLAGS_SKIP_OVER_DTIM_MSK);
+		}
 	}
 	iwl_mvm_power_log(mvm, &cmd);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-- 
1.9.1

[PATCH 26/28] iwlwifi: mvm: fix PSM disable during TDLS

[Emmanuel Grumbach]

From: Arik Nemtsov <arik@wizery.com>

Simplify the code and check for TDLS stations just before sending the
MAC_POWER_TABLE command. The previous version of the code still allowed
PM in some multi-interface scenarios even with TDLS connected.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/power.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index ff842ee..5b85b0c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -336,7 +336,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
 
 	if (!vif->bss_conf.ps || iwl_mvm_vif_low_latency(mvmvif) ||
-	    !mvmvif->pm_enabled)
+	    !mvmvif->pm_enabled || iwl_mvm_tdls_sta_count(mvm, vif))
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
@@ -510,8 +510,6 @@ struct iwl_power_vifs {
 	bool bss_active;
 	bool ap_active;
 	bool monitor_active;
-	bool bss_tdls;
-	bool p2p_tdls;
 };
 
 static void iwl_mvm_power_disable_pm_iterator(void *_data, u8* mac,
@@ -566,8 +564,6 @@ static void iwl_mvm_power_get_vifs_iterator(void *_data, u8 *mac,
 		/* only a single MAC of the same type */
 		WARN_ON(power_iterator->p2p_vif);
 		power_iterator->p2p_vif = vif;
-		power_iterator->p2p_tdls =
-			!!iwl_mvm_tdls_sta_count(power_iterator->mvm, vif);
 		if (mvmvif->phy_ctxt)
 			if (mvmvif->phy_ctxt->id < MAX_PHYS)
 				power_iterator->p2p_active = true;
@@ -577,8 +573,6 @@ static void iwl_mvm_power_get_vifs_iterator(void *_data, u8 *mac,
 		/* only a single MAC of the same type */
 		WARN_ON(power_iterator->bss_vif);
 		power_iterator->bss_vif = vif;
-		power_iterator->bss_tdls =
-			!!iwl_mvm_tdls_sta_count(power_iterator->mvm, vif);
 		if (mvmvif->phy_ctxt)
 			if (mvmvif->phy_ctxt->id < MAX_PHYS)
 				power_iterator->bss_active = true;
@@ -621,15 +615,13 @@ static void iwl_mvm_power_set_pm(struct iwl_mvm *mvm,
 		ap_mvmvif = iwl_mvm_vif_from_mac80211(vifs->ap_vif);
 
 	/* enable PM on bss if bss stand alone */
-	if (vifs->bss_active && !vifs->p2p_active && !vifs->ap_active &&
-	    !vifs->bss_tdls) {
+	if (vifs->bss_active && !vifs->p2p_active && !vifs->ap_active) {
 		bss_mvmvif->pm_enabled = true;
 		return;
 	}
 
 	/* enable PM on p2p if p2p stand alone */
-	if (vifs->p2p_active && !vifs->bss_active && !vifs->ap_active &&
-	    !vifs->p2p_tdls) {
+	if (vifs->p2p_active && !vifs->bss_active && !vifs->ap_active) {
 		if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PM)
 			p2p_mvmvif->pm_enabled = true;
 		return;
-- 
1.9.1

[PATCH 27/28] iwlwifi: mvm: move IWL_MVM_UAPSD_QUEUES to constants.h

[Emmanuel Grumbach]

From: Eliad Peller <eliad@wizery.com>

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h | 6 ++++++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c  | 2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h       | 4 ----
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 1181089..a355788 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -65,12 +65,18 @@
 #ifndef __MVM_CONSTANTS_H
 #define __MVM_CONSTANTS_H
 
+#include <linux/ieee80211.h>
+
 #define IWL_MVM_DEFAULT_PS_TX_DATA_TIMEOUT	(100 * USEC_PER_MSEC)
 #define IWL_MVM_DEFAULT_PS_RX_DATA_TIMEOUT	(100 * USEC_PER_MSEC)
 #define IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT	(10 * USEC_PER_MSEC)
 #define IWL_MVM_WOWLAN_PS_RX_DATA_TIMEOUT	(10 * USEC_PER_MSEC)
 #define IWL_MVM_UAPSD_RX_DATA_TIMEOUT		(50 * USEC_PER_MSEC)
 #define IWL_MVM_UAPSD_TX_DATA_TIMEOUT		(50 * USEC_PER_MSEC)
+#define IWL_MVM_UAPSD_QUEUES		(IEEE80211_WMM_IE_STA_QOSINFO_AC_VO |\
+					 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |\
+					 IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |\
+					 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
 #define IWL_MVM_PS_HEAVY_TX_THLD_PACKETS	20
 #define IWL_MVM_PS_HEAVY_RX_THLD_PACKETS	8
 #define IWL_MVM_PS_SNOOZE_HEAVY_TX_THLD_PACKETS	30
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index a3bb4a0..2517f87 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -327,7 +327,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	    IWL_UCODE_API(mvm->fw->ucode_ver) >= 9 &&
 	    !iwlwifi_mod_params.uapsd_disable) {
 		hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD;
-		hw->uapsd_queues = IWL_UAPSD_AC_INFO;
+		hw->uapsd_queues = IWL_MVM_UAPSD_QUEUES;
 		hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 6eb1f85..efdafa1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -180,10 +180,6 @@ enum iwl_power_scheme {
 };
 
 #define IWL_CONN_MAX_LISTEN_INTERVAL	10
-#define IWL_UAPSD_AC_INFO		(IEEE80211_WMM_IE_STA_QOSINFO_AC_VO |\
-					 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |\
-					 IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |\
-					 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
 #define IWL_UAPSD_MAX_SP		IEEE80211_WMM_IE_STA_QOSINFO_SP_2
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-- 
1.9.1

[PATCH 28/28] iwlwifi: mvm: align CSA GO NOA time event naming with the firmware

[Emmanuel Grumbach]

From: Luciano Coelho <luciano.coelho@intel.com>

The time event used for CSA GO will also be used by CSA client.
Rename the symbols to something more generic and aligned with the
firmware code.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h     |  2 +-
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c   | 10 +++++-----
 drivers/net/wireless/iwlwifi/mvm/mvm.h        |  8 ++++----
 drivers/net/wireless/iwlwifi/mvm/time-event.c | 10 +++++-----
 drivers/net/wireless/iwlwifi/mvm/time-event.h |  8 ++++----
 5 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index fbcc036..a2c6628 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -554,7 +554,7 @@ enum iwl_time_event_type {
 	TE_WIDI_TX_SYNC,
 
 	/* Channel Switch NoA */
-	TE_P2P_GO_CSA_NOA,
+	TE_CHANNEL_SWITCH_PERIOD,
 
 	TE_MAX
 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 158aed5..8342671 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -1234,13 +1234,13 @@ static void iwl_mvm_csa_count_down(struct iwl_mvm *mvm,
 		    !iwl_mvm_te_scheduled(&mvmvif->time_event_data) && gp2) {
 			u32 rel_time = (c + 1) *
 				       csa_vif->bss_conf.beacon_int -
-				       IWL_MVM_CHANNEL_SWITCH_TIME;
+				       IWL_MVM_CHANNEL_SWITCH_TIME_GO;
 			u32 apply_time = gp2 + rel_time * 1024;
 
-			iwl_mvm_schedule_csa_noa(mvm, csa_vif,
-						 IWL_MVM_CHANNEL_SWITCH_TIME -
-						 IWL_MVM_CHANNEL_SWITCH_MARGIN,
-						 apply_time);
+			iwl_mvm_schedule_csa_period(mvm, csa_vif,
+					 IWL_MVM_CHANNEL_SWITCH_TIME_GO -
+					 IWL_MVM_CHANNEL_SWITCH_MARGIN,
+					 apply_time);
 		}
 	} else if (!iwl_mvm_te_scheduled(&mvmvif->time_event_data)) {
 		/* we don't have CSA NoA scheduled yet, switch now */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index efdafa1..5529958 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -87,11 +87,11 @@
 /* A TimeUnit is 1024 microsecond */
 #define MSEC_TO_TU(_msec)	(_msec*1000/1024)
 
-/*
- * The CSA NoA is scheduled IWL_MVM_CHANNEL_SWITCH_TIME TUs before "beacon 0"
- * TBTT. This value should be big enough to ensure that we switch in time.
+/* This value represents the number of TUs before CSA "beacon 0" TBTT
+ * when the CSA time-event needs to be scheduled to start.  It must be
+ * big enough to ensure that we switch in time.
  */
-#define IWL_MVM_CHANNEL_SWITCH_TIME 40
+#define IWL_MVM_CHANNEL_SWITCH_TIME_GO		40
 
 /*
  * This value (in TUs) is used to fine tune the CSA NoA end time which should
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c
index 447d3b1..b7f9e61 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c
@@ -700,9 +700,9 @@ void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm)
 	iwl_mvm_roc_finished(mvm);
 }
 
-int iwl_mvm_schedule_csa_noa(struct iwl_mvm *mvm,
-			      struct ieee80211_vif *vif,
-			      u32 duration, u32 apply_time)
+int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm,
+				struct ieee80211_vif *vif,
+				u32 duration, u32 apply_time)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data;
@@ -711,14 +711,14 @@ int iwl_mvm_schedule_csa_noa(struct iwl_mvm *mvm,
 	lockdep_assert_held(&mvm->mutex);
 
 	if (te_data->running) {
-		IWL_DEBUG_TE(mvm, "CS NOA is already scheduled\n");
+		IWL_DEBUG_TE(mvm, "CS period is already scheduled\n");
 		return -EBUSY;
 	}
 
 	time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD);
 	time_cmd.id_and_color =
 		cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color));
-	time_cmd.id = cpu_to_le32(TE_P2P_GO_CSA_NOA);
+	time_cmd.id = cpu_to_le32(TE_CHANNEL_SWITCH_PERIOD);
 	time_cmd.apply_time = cpu_to_le32(apply_time);
 	time_cmd.max_frags = TE_V2_FRAG_NONE;
 	time_cmd.duration = cpu_to_le32(duration);
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.h b/drivers/net/wireless/iwlwifi/mvm/time-event.h
index bee3b24..b350e47 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.h
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.h
@@ -219,7 +219,7 @@ void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
 void iwl_mvm_roc_done_wk(struct work_struct *wk);
 
 /**
- * iwl_mvm_schedule_csa_noa - request NoA for channel switch
+ * iwl_mvm_schedule_csa_period - request channel switch absence period
  * @mvm: the mvm component
  * @vif: the virtual interface for which the channel switch is issued
  * @duration: the duration of the NoA in TU.
@@ -228,9 +228,9 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk);
  * This function is used to schedule NoA time event and is used to perform
  * the channel switch flow.
  */
-int iwl_mvm_schedule_csa_noa(struct iwl_mvm *mvm,
-			     struct ieee80211_vif *vif,
-			     u32 duration, u32 apply_time);
+int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm,
+				struct ieee80211_vif *vif,
+				u32 duration, u32 apply_time);
 
 /**
  * iwl_mvm_te_scheduled - check if the fw received the TE cmd
-- 
1.9.1

Re: pull request: iwlwifi-next 2014-09-15

[John W. Linville]

On Mon, Sep 15, 2014 at 08:07:56AM +0300, Emmanuel Grumbach wrote:
> Hi John,
> 
> This is a pull request for 3.18. I have a few more patches for 3.18 that are not included here.
> This pull request was big enough without them, and they rely on mac80211 patches that are not
> in wireless-next yet. In my master branch, I merged Johannes's tag on mac80211-next to be able
> to apply these patches, I'll send you another pull request once you'll pull from Johannes. Let
> me know if you prefer me to merge wireless-next rather than mac80211-next. I just found it easier
> for me.
> I also merged iwlwifi-fixes to avoid minor conflicts.
> 
> I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS
> and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more
> to come soon. Besides this, nothing really special here.
> 
> Please pull, thanks!
> 
> The following changes since commit 712b24adc105518f7cbbb6f9f353efea48954bb9:
> 
>   iwlwifi: mvm: clean up AUX station handling (2014-09-03 22:49:13 +0300)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git for-john
> 
> for you to fetch changes up to f991e17ba2584e2be66476cc468f19769efd55cc:
> 
>   iwlwifi: mvm: align CSA GO NOA time event naming with the firmware (2014-09-14 22:02:24 +0300)

Pulling now...

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

[PATCH 08/12] iwlwiwi: mvm: use bss_conf->dtim_period instead of conf.ps_dtim_period

[Emmanuel Grumbach]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The latter is meant for software implementation of power
save and is not per-virtual interface. Since our driver
supports multiple virtual interfaces, we need to use
vif->bss_conf.dtim_period.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 3 +--
 drivers/net/wireless/iwlwifi/mvm/power.c       | 5 ++---
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 2e90ff7..87e517b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -74,8 +74,7 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm,
 
 	switch (param) {
 	case MVM_DEBUGFS_PM_KEEP_ALIVE: {
-		struct ieee80211_hw *hw = mvm->hw;
-		int dtimper = hw->conf.ps_dtim_period ?: 1;
+		int dtimper = vif->bss_conf.dtim_period ?: 1;
 		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
 
 		IWL_DEBUG_POWER(mvm, "debugfs: set keep_alive= %d sec\n", val);
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 2b2d108..d9769a2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -281,7 +281,6 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 				    struct ieee80211_vif *vif,
 				    struct iwl_mac_power_cmd *cmd)
 {
-	struct ieee80211_hw *hw = mvm->hw;
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	struct ieee80211_channel *chan;
 	int dtimper, dtimper_msec;
@@ -292,7 +291,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 
 	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
 							    mvmvif->color));
-	dtimper = hw->conf.ps_dtim_period ?: 1;
+	dtimper = vif->bss_conf.dtim_period;
 
 	/*
 	 * Regardless of power management state the driver must set
@@ -885,7 +884,7 @@ int iwl_mvm_update_d0i3_power_mode(struct iwl_mvm *mvm,
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	if (enable) {
 		/* configure skip over dtim up to 300 msec */
-		int dtimper = mvm->hw->conf.ps_dtim_period ?: 1;
+		int dtimper = vif->bss_conf.dtim_period ?: 1;
 		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
 
 		if (WARN_ON(!dtimper_msec))
-- 
1.9.1