[PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver

[PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver

[Alexander Shiyan]

This patch adds the devicetree documentation for the
Cirrus Logic CLPS711X SPI driver.

Signed-off-by: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
---
 .../devicetree/bindings/spi/spi-clps711x.txt         | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
new file mode 100644
index 0000000..43712c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
@@ -0,0 +1,20 @@
+* Cirrus Logic ARM CLPS711X Serial Peripheral Interface (SPI)
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-spi".
+- reg: Offset and length of the register set for the device.
+- interrupts: Should contain SPI interrupt.
+- clocks: phandle to SPI reference clock.
+- cs-gpios: Specifies the GPIO pins to be used for chipselects.
+
+Example:
+	spi: spi@80000500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cirrus,ep7312-spi", "cirrus,clps711x-spi";
+		reg = <0x80000500 0x4>;
+		interrupts = <15>;
+		clocks = <&clks CLPS711X_CLK_SPIREF>;
+		cs-gpios = <&portb 4 GPIO_ACTIVE_LOW>,
+			   <&portb 5 GPIO_ACTIVE_LOW>;
+	};
-- 
1.8.5.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver

[Mark Rutland]

On Sat, Sep 20, 2014 at 08:05:36AM +0100, Alexander Shiyan wrote:
> This patch adds the devicetree documentation for the
> Cirrus Logic CLPS711X SPI driver.
> 
> Signed-off-by: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
> ---
>  .../devicetree/bindings/spi/spi-clps711x.txt         | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> new file mode 100644
> index 0000000..43712c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> @@ -0,0 +1,20 @@
> +* Cirrus Logic ARM CLPS711X Serial Peripheral Interface (SPI)
> +
> +Required properties:
> +- compatible: Shall contain "cirrus,clps711x-spi".

Is there a specific "clps11x" device, or is that 'x' a wildcard?

Please don't use wildcards in bindings. Choose a particular device as
the fallback string to use.

> +- reg: Offset and length of the register set for the device.
> +- interrupts: Should contain SPI interrupt.
> +- clocks: phandle to SPI reference clock.
> +- cs-gpios: Specifies the GPIO pins to be used for chipselects.
> +
> +Example:
> +	spi: spi@80000500 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "cirrus,ep7312-spi", "cirrus,clps711x-spi";

Which other strings are compatible?

Thanks,
Mark.

> +		reg = <0x80000500 0x4>;
> +		interrupts = <15>;
> +		clocks = <&clks CLPS711X_CLK_SPIREF>;
> +		cs-gpios = <&portb 4 GPIO_ACTIVE_LOW>,
> +			   <&portb 5 GPIO_ACTIVE_LOW>;
> +	};
> -- 
> 1.8.5.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI driver

[Alexander Shiyan]

+CC: Arnd Bergmann 

Mon, 22 Sep 2014 19:08:52 +0100 от Mark Rutland <mark.rutland@arm.com>:
> On Sat, Sep 20, 2014 at 08:05:36AM +0100, Alexander Shiyan wrote:
> > This patch adds the devicetree documentation for the
> > Cirrus Logic CLPS711X SPI driver.
> > 
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > ---
> >  .../devicetree/bindings/spi/spi-clps711x.txt         | 20 ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> > new file mode 100644
> > index 0000000..43712c0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
> > @@ -0,0 +1,20 @@
> > +* Cirrus Logic ARM CLPS711X Serial Peripheral Interface (SPI)
> > +
> > +Required properties:
> > +- compatible: Shall contain "cirrus,clps711x-spi".
> 
> Is there a specific "clps11x" device, or is that 'x' a wildcard?
> 
> Please don't use wildcards in bindings. Choose a particular device as
> the fallback string to use.

We have agreed to use such compatible string format for this platform.
http://www.spinics.net/lists/linux-pwm/msg00958.html
All CLPS711X-drivers use this format.

---