[PATCH] powerpc/eeh: Block CFG upon frozen Shiner adapter

[PATCH] powerpc/eeh: Block CFG upon frozen Shiner adapter

[Gavin Shan]

The Broadcom Shiner 2-ports 10G ethernet adapter has same problem
commit 6f20bda0 ("powerpc/eeh: Block PCI config access upon frozen
PE") fixes. Put it to the black list as well.

   # lspci -s 0004:01:00.0
   0004:01:00.0 Ethernet controller: Broadcom Corporation \
                NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)
   # lspci -n -s 0004:01:00.0
   0004:01:00.0 0200: 14e4:168e (rev 10)

Reported-by: John Walthour <jwalthour@us.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 443ce96..1d19e79 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -182,9 +182,10 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * that PE to block its config space.
 	 *
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
-	if (dev->vendor == PCI_VENDOR_ID_BROADCOM &&
-	    dev->device == 0x1657)
+	if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
+	    (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
 	/*
-- 
1.8.3.2