[PATCH 00/12] SDHCI PXA cleanup and clocks

[PATCH 00/12] SDHCI PXA cleanup and clocks

[Sebastian Hesselbarth]

This patch set does a little cleanup on PXA v2/v3 drivers and
adds an additional, optional core clock to v3 driver that is
required on Marvell Berlin BG2 and BG2CD SoCs.

Patch 1 removes the unused private driver data from pxav2 driver.

Patch 2 is a fix for pxav3 driver to honor MMC_DDR52 timing on
uhs signaling. AFAICS, up to now there was no user affected by it
but Sony NSZ-GS7 will be.

Patch 3 moves struct sdhci_pxa from global include to the only
driver using it now. Patch 4 removes the unused clk_enable from
it.

Patch 5 removes some wrong and unnecessary checks on struct clk
from v3 driver. Patch 6 moves the struct clk for I/O clock to
the private driver data, while Patch 7 prepares the driver for
named clocks.

Patch 8 adds support for an additional, optional core clock that
is now also documented in the binding with Patch 9.

Patches 10-12 finally add corresponding sdhci nodes to berlin2
and berlin2cd, Chromecast and NSZ-GS7 DT files.

The patches are currently based on next-20141003 and are intended
for v3.19, i.e. I'll resend the series as soon as v3.18-rc1 drops.

A branch with the patches applied on top of next-201410-03 can be
found on

git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-bg2cd-sdhci-v1

Sebastian Hesselbarth (12):
  mmc: sdhci-pxav2: Drop unused struct sdhci_pxa
  mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling
  mmc: sdhci-pxav3: Move private driver data to driver source
  mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa
  mmc: sdhci-pxav3: Remove checks for mandatory host clock
  mmc: sdhci-pxav3: Move I/O clock to private data
  mmc: sdhci-pxav3: Try to get named I/O clock first
  mmc: sdhci-pxav3: Get optional core clock
  mmc: sdhci-pxav3: Document clocks and additional clock-names property
  ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
  ARM: dts: berlin: Enable WiFi on Google Chromecast
  ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7

 .../devicetree/bindings/mmc/sdhci-pxa.txt          |  7 +++
 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts         |  7 +++
 arch/arm/boot/dts/berlin2.dtsi                     | 34 ++++++++++++
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts  |  9 ++++
 arch/arm/boot/dts/berlin2cd.dtsi                   |  9 ++++
 drivers/mmc/host/sdhci-pxav2.c                     | 15 ++----
 drivers/mmc/host/sdhci-pxav3.c                     | 60 ++++++++++++++--------
 include/linux/platform_data/pxa_sdhci.h            |  5 --
 8 files changed, 108 insertions(+), 38 deletions(-)

---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
-- 
2.1.1

[PATCH 00/12] SDHCI PXA cleanup and clocks

[Sebastian Hesselbarth]

This patch set does a little cleanup on PXA v2/v3 drivers and
adds an additional, optional core clock to v3 driver that is
required on Marvell Berlin BG2 and BG2CD SoCs.

Patch 1 removes the unused private driver data from pxav2 driver.

Patch 2 is a fix for pxav3 driver to honor MMC_DDR52 timing on
uhs signaling. AFAICS, up to now there was no user affected by it
but Sony NSZ-GS7 will be.

Patch 3 moves struct sdhci_pxa from global include to the only
driver using it now. Patch 4 removes the unused clk_enable from
it.

Patch 5 removes some wrong and unnecessary checks on struct clk
from v3 driver. Patch 6 moves the struct clk for I/O clock to
the private driver data, while Patch 7 prepares the driver for
named clocks.

Patch 8 adds support for an additional, optional core clock that
is now also documented in the binding with Patch 9.

Patches 10-12 finally add corresponding sdhci nodes to berlin2
and berlin2cd, Chromecast and NSZ-GS7 DT files.

The patches are currently based on next-20141003 and are intended
for v3.19, i.e. I'll resend the series as soon as v3.18-rc1 drops.

A branch with the patches applied on top of next-201410-03 can be
found on

git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-bg2cd-sdhci-v1

Sebastian Hesselbarth (12):
  mmc: sdhci-pxav2: Drop unused struct sdhci_pxa
  mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling
  mmc: sdhci-pxav3: Move private driver data to driver source
  mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa
  mmc: sdhci-pxav3: Remove checks for mandatory host clock
  mmc: sdhci-pxav3: Move I/O clock to private data
  mmc: sdhci-pxav3: Try to get named I/O clock first
  mmc: sdhci-pxav3: Get optional core clock
  mmc: sdhci-pxav3: Document clocks and additional clock-names property
  ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
  ARM: dts: berlin: Enable WiFi on Google Chromecast
  ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7

 .../devicetree/bindings/mmc/sdhci-pxa.txt          |  7 +++
 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts         |  7 +++
 arch/arm/boot/dts/berlin2.dtsi                     | 34 ++++++++++++
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts  |  9 ++++
 arch/arm/boot/dts/berlin2cd.dtsi                   |  9 ++++
 drivers/mmc/host/sdhci-pxav2.c                     | 15 ++----
 drivers/mmc/host/sdhci-pxav3.c                     | 60 ++++++++++++++--------
 include/linux/platform_data/pxa_sdhci.h            |  5 --
 8 files changed, 108 insertions(+), 38 deletions(-)

---
Cc: Chris Ball <chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org>
Cc: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Antoine Tenart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 00/12] SDHCI PXA cleanup and clocks

[Sebastian Hesselbarth]

This patch set does a little cleanup on PXA v2/v3 drivers and
adds an additional, optional core clock to v3 driver that is
required on Marvell Berlin BG2 and BG2CD SoCs.

Patch 1 removes the unused private driver data from pxav2 driver.

Patch 2 is a fix for pxav3 driver to honor MMC_DDR52 timing on
uhs signaling. AFAICS, up to now there was no user affected by it
but Sony NSZ-GS7 will be.

Patch 3 moves struct sdhci_pxa from global include to the only
driver using it now. Patch 4 removes the unused clk_enable from
it.

Patch 5 removes some wrong and unnecessary checks on struct clk
from v3 driver. Patch 6 moves the struct clk for I/O clock to
the private driver data, while Patch 7 prepares the driver for
named clocks.

Patch 8 adds support for an additional, optional core clock that
is now also documented in the binding with Patch 9.

Patches 10-12 finally add corresponding sdhci nodes to berlin2
and berlin2cd, Chromecast and NSZ-GS7 DT files.

The patches are currently based on next-20141003 and are intended
for v3.19, i.e. I'll resend the series as soon as v3.18-rc1 drops.

A branch with the patches applied on top of next-201410-03 can be
found on

git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-bg2cd-sdhci-v1

Sebastian Hesselbarth (12):
  mmc: sdhci-pxav2: Drop unused struct sdhci_pxa
  mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling
  mmc: sdhci-pxav3: Move private driver data to driver source
  mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa
  mmc: sdhci-pxav3: Remove checks for mandatory host clock
  mmc: sdhci-pxav3: Move I/O clock to private data
  mmc: sdhci-pxav3: Try to get named I/O clock first
  mmc: sdhci-pxav3: Get optional core clock
  mmc: sdhci-pxav3: Document clocks and additional clock-names property
  ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
  ARM: dts: berlin: Enable WiFi on Google Chromecast
  ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7

 .../devicetree/bindings/mmc/sdhci-pxa.txt          |  7 +++
 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts         |  7 +++
 arch/arm/boot/dts/berlin2.dtsi                     | 34 ++++++++++++
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts  |  9 ++++
 arch/arm/boot/dts/berlin2cd.dtsi                   |  9 ++++
 drivers/mmc/host/sdhci-pxav2.c                     | 15 ++----
 drivers/mmc/host/sdhci-pxav3.c                     | 60 ++++++++++++++--------
 include/linux/platform_data/pxa_sdhci.h            |  5 --
 8 files changed, 108 insertions(+), 38 deletions(-)

---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
-- 
2.1.1

[PATCH 01/12] mmc: sdhci-pxav2: Drop unused struct sdhci_pxa

[Sebastian Hesselbarth]

struct sdhci_pxa is private data of PXA SDHCI driver, but not used in
sdhci-pxav2 at all. Drop unused references to struct sdhci_pxa.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav2.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index b4c23e983baf..f98008b5ea77 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -167,23 +167,17 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = NULL;
-	struct sdhci_pxa *pxa = NULL;
 	const struct of_device_id *match;
 
 	int ret;
 	struct clk *clk;
 
-	pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
-	if (!pxa)
-		return -ENOMEM;
-
 	host = sdhci_pltfm_init(pdev, NULL, 0);
-	if (IS_ERR(host)) {
-		kfree(pxa);
+	if (IS_ERR(host))
 		return PTR_ERR(host);
-	}
+
 	pltfm_host = sdhci_priv(host);
-	pltfm_host->priv = pxa;
+	pltfm_host->priv = NULL;
 
 	clk = clk_get(dev, "PXA-SDHCLK");
 	if (IS_ERR(clk)) {
@@ -238,7 +232,6 @@ err_add_host:
 	clk_put(clk);
 err_clk_get:
 	sdhci_pltfm_free(pdev);
-	kfree(pxa);
 	return ret;
 }
 
@@ -246,14 +239,12 @@ static int sdhci_pxav2_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_pxa *pxa = pltfm_host->priv;
 
 	sdhci_remove_host(host, 1);
 
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	sdhci_pltfm_free(pdev);
-	kfree(pxa);
 
 	return 0;
 }
-- 
2.1.1

[PATCH 01/12] mmc: sdhci-pxav2: Drop unused struct sdhci_pxa

[Sebastian Hesselbarth]

struct sdhci_pxa is private data of PXA SDHCI driver, but not used in
sdhci-pxav2 at all. Drop unused references to struct sdhci_pxa.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav2.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index b4c23e983baf..f98008b5ea77 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -167,23 +167,17 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = NULL;
-	struct sdhci_pxa *pxa = NULL;
 	const struct of_device_id *match;
 
 	int ret;
 	struct clk *clk;
 
-	pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
-	if (!pxa)
-		return -ENOMEM;
-
 	host = sdhci_pltfm_init(pdev, NULL, 0);
-	if (IS_ERR(host)) {
-		kfree(pxa);
+	if (IS_ERR(host))
 		return PTR_ERR(host);
-	}
+
 	pltfm_host = sdhci_priv(host);
-	pltfm_host->priv = pxa;
+	pltfm_host->priv = NULL;
 
 	clk = clk_get(dev, "PXA-SDHCLK");
 	if (IS_ERR(clk)) {
@@ -238,7 +232,6 @@ err_add_host:
 	clk_put(clk);
 err_clk_get:
 	sdhci_pltfm_free(pdev);
-	kfree(pxa);
 	return ret;
 }
 
@@ -246,14 +239,12 @@ static int sdhci_pxav2_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_pxa *pxa = pltfm_host->priv;
 
 	sdhci_remove_host(host, 1);
 
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	sdhci_pltfm_free(pdev);
-	kfree(pxa);
 
 	return 0;
 }
-- 
2.1.1

[PATCH 02/12] mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling

[Sebastian Hesselbarth]

commit bb8175a8aa42d731a840cd474e348ac3367eb5a0
  ("mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMC")
added MMC_DDR52 as eMMC's DDR mode to be distinguished from SD-UHS.

While the differentation may be useful, pxav3 SDHCI controller lacks
a corresponding check in its custom .set_uhs_signaling callback for
MMC_DDR52. This patch adds a new switch case for MMC_TIMING_MMC_DDR52
to MMC_TIMING_UHS_DDR50 case.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net> 
Cc: Ulf Hansson <ulf.hansson@linaro.org> 
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 5036d7d39529..b55c807982fe 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -211,6 +211,7 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 	case MMC_TIMING_UHS_SDR104:
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
 		break;
+	case MMC_TIMING_MMC_DDR52:
 	case MMC_TIMING_UHS_DDR50:
 		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
 		break;
-- 
2.1.1

[PATCH 02/12] mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling

[Sebastian Hesselbarth]

commit bb8175a8aa42d731a840cd474e348ac3367eb5a0
  ("mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMC")
added MMC_DDR52 as eMMC's DDR mode to be distinguished from SD-UHS.

While the differentation may be useful, pxav3 SDHCI controller lacks
a corresponding check in its custom .set_uhs_signaling callback for
MMC_DDR52. This patch adds a new switch case for MMC_TIMING_MMC_DDR52
to MMC_TIMING_UHS_DDR50 case.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net> 
Cc: Ulf Hansson <ulf.hansson@linaro.org> 
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org 
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 5036d7d39529..b55c807982fe 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -211,6 +211,7 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 	case MMC_TIMING_UHS_SDR104:
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
 		break;
+	case MMC_TIMING_MMC_DDR52:
 	case MMC_TIMING_UHS_DDR50:
 		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
 		break;
-- 
2.1.1

[PATCH 03/12] mmc: sdhci-pxav3: Move private driver data to driver source

[Sebastian Hesselbarth]

struct sdhci_pxa is only used in sdhci_pxa driver itself, so move it
there.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c          | 5 +++++
 include/linux/platform_data/pxa_sdhci.h | 5 -----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index b55c807982fe..48bc8179c8fc 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -58,6 +58,11 @@
 #define SDCE_MISC_INT		(1<<2)
 #define SDCE_MISC_INT_EN	(1<<1)
 
+struct sdhci_pxa {
+	u8	clk_enable;
+	u8	power_mode;
+};
+
 /*
  * These registers are relative to the second register region, for the
  * MBus bridge.
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
index 27d3156d093a..9e20c2fb4ffd 100644
--- a/include/linux/platform_data/pxa_sdhci.h
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -55,9 +55,4 @@ struct sdhci_pxa_platdata {
 	unsigned int	quirks2;
 	unsigned int	pm_caps;
 };
-
-struct sdhci_pxa {
-	u8	clk_enable;
-	u8	power_mode;
-};
 #endif /* _PXA_SDHCI_H_ */
-- 
2.1.1

[PATCH 03/12] mmc: sdhci-pxav3: Move private driver data to driver source

[Sebastian Hesselbarth]

struct sdhci_pxa is only used in sdhci_pxa driver itself, so move it
there.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c          | 5 +++++
 include/linux/platform_data/pxa_sdhci.h | 5 -----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index b55c807982fe..48bc8179c8fc 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -58,6 +58,11 @@
 #define SDCE_MISC_INT		(1<<2)
 #define SDCE_MISC_INT_EN	(1<<1)
 
+struct sdhci_pxa {
+	u8	clk_enable;
+	u8	power_mode;
+};
+
 /*
  * These registers are relative to the second register region, for the
  * MBus bridge.
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
index 27d3156d093a..9e20c2fb4ffd 100644
--- a/include/linux/platform_data/pxa_sdhci.h
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -55,9 +55,4 @@ struct sdhci_pxa_platdata {
 	unsigned int	quirks2;
 	unsigned int	pm_caps;
 };
-
-struct sdhci_pxa {
-	u8	clk_enable;
-	u8	power_mode;
-};
 #endif /* _PXA_SDHCI_H_ */
-- 
2.1.1

[PATCH 04/12] mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa

[Sebastian Hesselbarth]

clk_enable from struct sdhci_pxa is unused, remove it from the private
driver data.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 48bc8179c8fc..d1f63d32b2cd 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,7 +59,6 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
-	u8	clk_enable;
 	u8	power_mode;
 };
 
-- 
2.1.1

[PATCH 04/12] mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa

[Sebastian Hesselbarth]

clk_enable from struct sdhci_pxa is unused, remove it from the private
driver data.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 48bc8179c8fc..d1f63d32b2cd 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,7 +59,6 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
-	u8	clk_enable;
 	u8	power_mode;
 };
 
-- 
2.1.1

[PATCH 05/12] mmc: sdhci-pxav3: Remove checks for mandatory host clock

[Sebastian Hesselbarth]

NULL-checking a struct clk it not only wrong but also not required as
for PXAv3 driver the corresponding clock is mandatory. Remove the
checks from sdhci_pxav3_runtime_{suspend,resume}.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index d1f63d32b2cd..e52bbbb09d88 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -448,13 +448,11 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	unsigned long flags;
 
-	if (pltfm_host->clk) {
-		spin_lock_irqsave(&host->lock, flags);
-		host->runtime_suspended = true;
-		spin_unlock_irqrestore(&host->lock, flags);
+	spin_lock_irqsave(&host->lock, flags);
+	host->runtime_suspended = true;
+	spin_unlock_irqrestore(&host->lock, flags);
 
-		clk_disable_unprepare(pltfm_host->clk);
-	}
+	clk_disable_unprepare(pltfm_host->clk);
 
 	return 0;
 }
@@ -465,13 +463,11 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	unsigned long flags;
 
-	if (pltfm_host->clk) {
-		clk_prepare_enable(pltfm_host->clk);
+	clk_prepare_enable(pltfm_host->clk);
 
-		spin_lock_irqsave(&host->lock, flags);
-		host->runtime_suspended = false;
-		spin_unlock_irqrestore(&host->lock, flags);
-	}
+	spin_lock_irqsave(&host->lock, flags);
+	host->runtime_suspended = false;
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	return 0;
 }
-- 
2.1.1

[PATCH 05/12] mmc: sdhci-pxav3: Remove checks for mandatory host clock

[Sebastian Hesselbarth]

NULL-checking a struct clk it not only wrong but also not required as
for PXAv3 driver the corresponding clock is mandatory. Remove the
checks from sdhci_pxav3_runtime_{suspend,resume}.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index d1f63d32b2cd..e52bbbb09d88 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -448,13 +448,11 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	unsigned long flags;
 
-	if (pltfm_host->clk) {
-		spin_lock_irqsave(&host->lock, flags);
-		host->runtime_suspended = true;
-		spin_unlock_irqrestore(&host->lock, flags);
+	spin_lock_irqsave(&host->lock, flags);
+	host->runtime_suspended = true;
+	spin_unlock_irqrestore(&host->lock, flags);
 
-		clk_disable_unprepare(pltfm_host->clk);
-	}
+	clk_disable_unprepare(pltfm_host->clk);
 
 	return 0;
 }
@@ -465,13 +463,11 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	unsigned long flags;
 
-	if (pltfm_host->clk) {
-		clk_prepare_enable(pltfm_host->clk);
+	clk_prepare_enable(pltfm_host->clk);
 
-		spin_lock_irqsave(&host->lock, flags);
-		host->runtime_suspended = false;
-		spin_unlock_irqrestore(&host->lock, flags);
-	}
+	spin_lock_irqsave(&host->lock, flags);
+	host->runtime_suspended = false;
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	return 0;
 }
-- 
2.1.1

[PATCH 06/12] mmc: sdhci-pxav3: Move I/O clock to private data

[Sebastian Hesselbarth]

As we are using references to the I/O clock throughout the driver,
move it to the private data. Also, in preparation for core clock,
rename it to clk_io.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e52bbbb09d88..a34a589670e6 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,6 +59,7 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
+	struct clk *clk_io;
 	u8	power_mode;
 };
 
@@ -288,9 +289,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	struct sdhci_host *host = NULL;
 	struct sdhci_pxa *pxa = NULL;
 	const struct of_device_id *match;
-
 	int ret;
-	struct clk *clk;
 
 	pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
 	if (!pxa)
@@ -310,14 +309,14 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = pxa;
 
-	clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(clk)) {
+	pxa->clk_io = devm_clk_get(dev, NULL);
+	if (IS_ERR(pxa->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
-		ret = PTR_ERR(clk);
+		ret = PTR_ERR(pxa->clk_io);
 		goto err_clk_get;
 	}
-	pltfm_host->clk = clk;
-	clk_prepare_enable(clk);
+	pltfm_host->clk = pxa->clk_io;
+	clk_prepare_enable(pxa->clk_io);
 
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -390,7 +389,7 @@ err_add_host:
 	pm_runtime_disable(&pdev->dev);
 err_of_parse:
 err_cd_req:
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(pxa->clk_io);
 err_clk_get:
 err_mbus_win:
 	sdhci_pltfm_free(pdev);
@@ -401,12 +400,13 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 
 	pm_runtime_get_sync(&pdev->dev);
 	sdhci_remove_host(host, 1);
 	pm_runtime_disable(&pdev->dev);
 
-	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(pxa->clk_io);
 
 	sdhci_pltfm_free(pdev);
 
@@ -446,13 +446,14 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = true;
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(pxa->clk_io);
 
 	return 0;
 }
@@ -461,9 +462,10 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 	unsigned long flags;
 
-	clk_prepare_enable(pltfm_host->clk);
+	clk_prepare_enable(pxa->clk_io);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = false;
-- 
2.1.1

[PATCH 06/12] mmc: sdhci-pxav3: Move I/O clock to private data

[Sebastian Hesselbarth]

As we are using references to the I/O clock throughout the driver,
move it to the private data. Also, in preparation for core clock,
rename it to clk_io.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e52bbbb09d88..a34a589670e6 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,6 +59,7 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
+	struct clk *clk_io;
 	u8	power_mode;
 };
 
@@ -288,9 +289,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	struct sdhci_host *host = NULL;
 	struct sdhci_pxa *pxa = NULL;
 	const struct of_device_id *match;
-
 	int ret;
-	struct clk *clk;
 
 	pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
 	if (!pxa)
@@ -310,14 +309,14 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = pxa;
 
-	clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(clk)) {
+	pxa->clk_io = devm_clk_get(dev, NULL);
+	if (IS_ERR(pxa->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
-		ret = PTR_ERR(clk);
+		ret = PTR_ERR(pxa->clk_io);
 		goto err_clk_get;
 	}
-	pltfm_host->clk = clk;
-	clk_prepare_enable(clk);
+	pltfm_host->clk = pxa->clk_io;
+	clk_prepare_enable(pxa->clk_io);
 
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -390,7 +389,7 @@ err_add_host:
 	pm_runtime_disable(&pdev->dev);
 err_of_parse:
 err_cd_req:
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(pxa->clk_io);
 err_clk_get:
 err_mbus_win:
 	sdhci_pltfm_free(pdev);
@@ -401,12 +400,13 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 
 	pm_runtime_get_sync(&pdev->dev);
 	sdhci_remove_host(host, 1);
 	pm_runtime_disable(&pdev->dev);
 
-	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(pxa->clk_io);
 
 	sdhci_pltfm_free(pdev);
 
@@ -446,13 +446,14 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = true;
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(pxa->clk_io);
 
 	return 0;
 }
@@ -461,9 +462,10 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 	unsigned long flags;
 
-	clk_prepare_enable(pltfm_host->clk);
+	clk_prepare_enable(pxa->clk_io);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = false;
-- 
2.1.1

[PATCH 07/12] mmc: sdhci-pxav3: Try to get named I/O clock first

[Sebastian Hesselbarth]

With support for more than one clock, we'll need to distinguish between
the clock by name. Change clock probing to first try to get "io" clock
before falling back to unnamed clock.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index a34a589670e6..3dfd97977515 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -309,7 +309,9 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = pxa;
 
-	pxa->clk_io = devm_clk_get(dev, NULL);
+	pxa->clk_io = devm_clk_get(dev, "io");
+	if (IS_ERR(pxa->clk_io))
+		pxa->clk_io = devm_clk_get(dev, NULL);
 	if (IS_ERR(pxa->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
 		ret = PTR_ERR(pxa->clk_io);
-- 
2.1.1

[PATCH 07/12] mmc: sdhci-pxav3: Try to get named I/O clock first

[Sebastian Hesselbarth]

With support for more than one clock, we'll need to distinguish between
the clock by name. Change clock probing to first try to get "io" clock
before falling back to unnamed clock.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index a34a589670e6..3dfd97977515 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -309,7 +309,9 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = pxa;
 
-	pxa->clk_io = devm_clk_get(dev, NULL);
+	pxa->clk_io = devm_clk_get(dev, "io");
+	if (IS_ERR(pxa->clk_io))
+		pxa->clk_io = devm_clk_get(dev, NULL);
 	if (IS_ERR(pxa->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
 		ret = PTR_ERR(pxa->clk_io);
-- 
2.1.1

[PATCH 08/12] mmc: sdhci-pxav3: Get optional core clock

[Sebastian Hesselbarth]

Besides the I/O clock, some PXAv3 SDHCI IP also requires a core clock to
be enabled. Add an optional core clock to the corresponding driver.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 3dfd97977515..ad0badad0ebc 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,6 +59,7 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
+	struct clk *clk_core;
 	struct clk *clk_io;
 	u8	power_mode;
 };
@@ -320,6 +321,10 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host->clk = pxa->clk_io;
 	clk_prepare_enable(pxa->clk_io);
 
+	pxa->clk_core = devm_clk_get(dev, "core");
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
+
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
@@ -392,6 +397,8 @@ err_add_host:
 err_of_parse:
 err_cd_req:
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 err_clk_get:
 err_mbus_win:
 	sdhci_pltfm_free(pdev);
@@ -409,6 +416,8 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 
 	sdhci_pltfm_free(pdev);
 
@@ -456,6 +465,8 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 
 	return 0;
 }
@@ -468,6 +479,8 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 	unsigned long flags;
 
 	clk_prepare_enable(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = false;
-- 
2.1.1

[PATCH 08/12] mmc: sdhci-pxav3: Get optional core clock

[Sebastian Hesselbarth]

Besides the I/O clock, some PXAv3 SDHCI IP also requires a core clock to
be enabled. Add an optional core clock to the corresponding driver.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/mmc/host/sdhci-pxav3.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 3dfd97977515..ad0badad0ebc 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -59,6 +59,7 @@
 #define SDCE_MISC_INT_EN	(1<<1)
 
 struct sdhci_pxa {
+	struct clk *clk_core;
 	struct clk *clk_io;
 	u8	power_mode;
 };
@@ -320,6 +321,10 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	pltfm_host->clk = pxa->clk_io;
 	clk_prepare_enable(pxa->clk_io);
 
+	pxa->clk_core = devm_clk_get(dev, "core");
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
+
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
@@ -392,6 +397,8 @@ err_add_host:
 err_of_parse:
 err_cd_req:
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 err_clk_get:
 err_mbus_win:
 	sdhci_pltfm_free(pdev);
@@ -409,6 +416,8 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 
 	sdhci_pltfm_free(pdev);
 
@@ -456,6 +465,8 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
 
 	return 0;
 }
@@ -468,6 +479,8 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 	unsigned long flags;
 
 	clk_prepare_enable(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = false;
-- 
2.1.1

[PATCH 09/12] mmc: sdhci-pxav3: Document clocks and additional clock-names property

[Sebastian Hesselbarth]

Now that sdhci-pxav3 driver allows to have more than one IP clock defined,
document both clocks and clock-names properties.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 Documentation/devicetree/bindings/mmc/sdhci-pxa.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 86223c3eda90..4dd6deb90719 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -12,6 +12,10 @@ Required properties:
   * for "marvell,armada-380-sdhci", two register areas. The first one
     for the SDHCI registers themselves, and the second one for the
     AXI/Mbus bridge registers of the SDHCI unit.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+    I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+    "io" for I/O clock and "core" for optional core clock.
 
 Optional properties:
 - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -23,6 +27,8 @@ sdhci@d4280800 {
 	reg = <0xd4280800 0x800>;
 	bus-width = <8>;
 	interrupts = <27>;
+	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+	clock-names = "io", "core";
 	non-removable;
 	mrvl,clk-delay-cycles = <31>;
 };
@@ -32,5 +38,6 @@ sdhci@d8000 {
 	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
 	interrupts = <0 25 0x4>;
 	clocks = <&gateclk 17>;
+	clock-names = "io";
 	mrvl,clk-delay-cycles = <0x1F>;
 };
-- 
2.1.1

[PATCH 09/12] mmc: sdhci-pxav3: Document clocks and additional clock-names property

[Sebastian Hesselbarth]

Now that sdhci-pxav3 driver allows to have more than one IP clock defined,
document both clocks and clock-names properties.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 Documentation/devicetree/bindings/mmc/sdhci-pxa.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index 86223c3eda90..4dd6deb90719 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -12,6 +12,10 @@ Required properties:
   * for "marvell,armada-380-sdhci", two register areas. The first one
     for the SDHCI registers themselves, and the second one for the
     AXI/Mbus bridge registers of the SDHCI unit.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+    I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+    "io" for I/O clock and "core" for optional core clock.
 
 Optional properties:
 - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -23,6 +27,8 @@ sdhci at d4280800 {
 	reg = <0xd4280800 0x800>;
 	bus-width = <8>;
 	interrupts = <27>;
+	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+	clock-names = "io", "core";
 	non-removable;
 	mrvl,clk-delay-cycles = <31>;
 };
@@ -32,5 +38,6 @@ sdhci at d8000 {
 	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
 	interrupts = <0 25 0x4>;
 	clocks = <&gateclk 17>;
+	clock-names = "io";
 	mrvl,clk-delay-cycles = <0x1F>;
 };
-- 
2.1.1

[PATCH 10/12] ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD

[Sebastian Hesselbarth]

Marvell Berlin BG2 has three, BG2CD just one pxav3 compatible
sdhci controllers, add them to the corresponding DT SoC
includes.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/berlin2.dtsi   | 34 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/berlin2cd.dtsi |  9 +++++++++
 2 files changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d7e81e124de0..2b7baaa77d88 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -53,6 +53,35 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
+			pinctrl-0 = <&emmc_pmux>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller@ac0000 {
 			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
@@ -253,6 +282,11 @@
 			reg = <0xea0000 0x400>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
+
+			emmc_pmux: emmc-pmux {
+				groups = "G26";
+				function = "emmc";
+			};
 		};
 
 		apb@fc0000 {
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 68f7032b4686..2afb133dc708 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -45,6 +45,15 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
-- 
2.1.1

[PATCH 10/12] ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD

[Sebastian Hesselbarth]

Marvell Berlin BG2 has three, BG2CD just one pxav3 compatible
sdhci controllers, add them to the corresponding DT SoC
includes.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/berlin2.dtsi   | 34 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/berlin2cd.dtsi |  9 +++++++++
 2 files changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d7e81e124de0..2b7baaa77d88 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -53,6 +53,35 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		sdhci0: sdhci at ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci at ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci at ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
+			pinctrl-0 = <&emmc_pmux>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller at ac0000 {
 			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
@@ -253,6 +282,11 @@
 			reg = <0xea0000 0x400>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
+
+			emmc_pmux: emmc-pmux {
+				groups = "G26";
+				function = "emmc";
+			};
 		};
 
 		apb at fc0000 {
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 68f7032b4686..2afb133dc708 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -45,6 +45,15 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		sdhci0: sdhci at ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller at ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
-- 
2.1.1

[PATCH 11/12] ARM: dts: berlin: Enable WiFi on Google Chromecast

[Sebastian Hesselbarth]

With SDHCI for BG2CD, we can now enable the port and allow to access
AzureWave WiFi/BT module on Google Chromecast.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 0816890a5c0d..bdcaff7c321e 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -43,4 +43,13 @@
 	};
 };
 
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+	non-removable;
+	status = "okay";
+};
+
 &uart0 { status = "okay"; };
-- 
2.1.1

[PATCH 11/12] ARM: dts: berlin: Enable WiFi on Google Chromecast

[Sebastian Hesselbarth]

With SDHCI for BG2CD, we can now enable the port and allow to access
AzureWave WiFi/BT module on Google Chromecast.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 0816890a5c0d..bdcaff7c321e 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -43,4 +43,13 @@
 	};
 };
 
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+	non-removable;
+	status = "okay";
+};
+
 &uart0 { status = "okay"; };
-- 
2.1.1

[PATCH 12/12] ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7

[Sebastian Hesselbarth]

With SDHCI for BG2, we can now enable the port and allow to access
Samsung M8G2FA 8GB eMMC on Sony NSZ-GS7.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index c72bfd468d10..5e5f3a90e465 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -26,4 +26,11 @@
 	};
 };
 
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &uart0 { status = "okay"; };
-- 
2.1.1

[PATCH 12/12] ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7

[Sebastian Hesselbarth]

With SDHCI for BG2, we can now enable the port and allow to access
Samsung M8G2FA 8GB eMMC on Sony NSZ-GS7.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: linux-mmc at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index c72bfd468d10..5e5f3a90e465 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -26,4 +26,11 @@
 	};
 };
 
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &uart0 { status = "okay"; };
-- 
2.1.1