All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/2] WIP: Add support for pi
@ 2014-10-08  9:20 Akshay Saraswat
  0 siblings, 0 replies; 2+ messages in thread
From: Akshay Saraswat @ 2014-10-08  9:20 UTC (permalink / raw)
  To: u-boot

Please, ignore this patch. Pushed by mistake.

>
>Signed-off-by: Akshay Saraswat 
>---
>arch/arm/cpu/armv7/exynos/Kconfig    |   5 +-
>arch/arm/dts/Makefile                |   3 +-
>arch/arm/dts/exynos5800-peach-pi.dts | 157 +++++++++++++++++++++++++++++++++++
>board/samsung/smdk5420/Kconfig       |  16 ++++
>board/samsung/smdk5420/MAINTAINERS   |   2 +
>configs/peach-pi_defconfig           |   4 +
>include/configs/exynos5420.h         |   2 +-
>include/configs/peach-pi.h           |  35 ++++++++
>8 files changed, 221 insertions(+), 3 deletions(-)
>create mode 100644 arch/arm/dts/exynos5800-peach-pi.dts
>create mode 100644 configs/peach-pi_defconfig
>create mode 100644 include/configs/peach-pi.h
>
>diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
>index b6a558b..76c0faf 100644
>--- a/arch/arm/cpu/armv7/exynos/Kconfig
>+++ b/arch/arm/cpu/armv7/exynos/Kconfig
>@@ -33,9 +33,12 @@ config TARGET_SNOW
>config TARGET_SMDK5420
>bool "SMDK5420 board"
>
>-config TARGET_PEACH_PIT
>+config TARGET_PEACH_PI
>bool "Peach Pi board"
>
>+config TARGET_PEACH_PIT
>+ bool "Peach Pit board"
>+
>endchoice
>
>config SYS_CPU
>diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>index 1ccd827..36e68d7 100644
>--- a/arch/arm/dts/Makefile
>+++ b/arch/arm/dts/Makefile
>@@ -8,7 +8,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
>exynos5250-snow.dtb \
>exynos5250-smdk5250.dtb \
>exynos5420-smdk5420.dtb \
>- exynos5420-peach-pit.dtb
>+ exynos5420-peach-pit.dtb \
>+ exynos5800-peach-pi.dtb
>dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
>dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
>tegra20-medcom-wide.dtb \
>diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
>new file mode 100644
>index 0000000..1c6aa8f
>--- /dev/null
>+++ b/arch/arm/dts/exynos5800-peach-pi.dts
>@@ -0,0 +1,157 @@
>+/*
>+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
>+ *
>+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>+ * http://www.samsung.com
>+ *
>+ * SPDX-License-Identifier: GPL-2.0+
>+ */
>+
>+/dts-v1/;
>+/include/ "exynos54xx.dtsi"
>+
>+/ {
>+ model = "Samsung/Google Peach Pi board based on Exynos5800";
>+
>+ compatible = "google,pit-rev#", "google,pit",
>+ "google,peach", "samsung,exynos5800", "samsung,exynos5";
>+
>+ config {
>+ google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
>+ hwid = "PIT TEST A-A 7848";
>+ lazy-init = <1>;
>+ };
>+
>+ aliases {
>+ serial0 = "/serial at 12C30000";
>+ console = "/serial at 12C30000";
>+ pmic = "/i2c at 12ca0000";
>+ };
>+
>+ dmc {
>+ mem-manuf = "samsung";
>+ mem-type = "ddr3";
>+ clock-frequency = <800000000>;
>+ arm-frequency = <1700000000>;
>+ };
>+
>+ tmu at 10060000 {
>+ samsung,min-temp = <25>;
>+ samsung,max-temp = <125>;
>+ samsung,start-warning = <95>;
>+ samsung,start-tripping = <105>;
>+ samsung,hw-tripping = <110>;
>+ samsung,efuse-min-value = <40>;
>+ samsung,efuse-value = <55>;
>+ samsung,efuse-max-value = <100>;
>+ samsung,slope = <274761730>;
>+ samsung,dc-value = <25>;
>+ };
>+
>+ /* MAX77802 is on i2c bus 4 */
>+ i2c at 12ca0000 {
>+ clock-frequency = <400000>;
>+ power-regulator at 9 {
>+ compatible = "maxim,max77802-pmic";
>+ reg = <0x9>;
>+ };
>+ };
>+
>+ i2c at 12cd0000 { /* i2c7 */
>+ clock-frequency = <100000>;
>+        soundcodec at 20 {
>+               reg = <0x20>;
>+               compatible = "maxim,max98090-codec";
>+        };
>+
>+         edp-lvds-bridge at 48 {
>+                 compatible = "parade,ps8625";
>+                 reg = <0x48>;
>+         };
>+ };
>+
>+        sound at 3830000 {
>+                samsung,codec-type = "max98090";
>+        };
>+
>+ i2c at 12e10000 { /* i2c9 */
>+ clock-frequency = <400000>;
>+                tpm at 20 {
>+                        compatible = "infineon,slb9645-tpm";
>+                        reg = <0x20>;
>+ };
>+ };
>+
>+ spi at 12d30000 { /* spi1 */
>+ spi-max-frequency = <50000000>;
>+ firmware_storage_spi: flash at 0 {
>+ reg = <0>;
>+
>+ /*
>+ * A region for the kernel to store a panic event
>+ * which the firmware will add to the log.
>+ */
>+ elog-panic-event-offset = <0x01e00000 0x100000>;
>+
>+ elog-shrink-size = <0x400>;
>+ elog-full-threshold = <0xc00>;
>+ };
>+ };
>+
>+ spi at 12d40000 { /* spi2 */
>+ spi-max-frequency = <4000000>;
>+ spi-deactivate-delay = <200>;
>+ cros-ec at 0 {
>+ reg = <0>;
>+ compatible = "google,cros-ec";
>+ spi-half-duplex;
>+ spi-max-timeout-ms = <1100>;
>+ spi-frame-header = <0xec>;
>+ ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
>+
>+ /*
>+ * This describes the flash memory within the EC. Note
>+ * that the STM32L flash erases to 0, not 0xff.
>+ */
>+ #address-cells = <1>;
>+ #size-cells = <1>;
>+ flash at 8000000 {
>+ reg = <0x08000000 0x20000>;
>+ erase-value = <0>;
>+ };
>+ };
>+ };
>+
>+ xhci at 12000000 {
>+ samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
>+ };
>+
>+ xhci at 12400000 {
>+ samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
>+ };
>+
>+ fimd at 14400000 {
>+ samsung,vl-freq = <60>;
>+ samsung,vl-col = <1920>;
>+ samsung,vl-row = <1080>;
>+ samsung,vl-width = <1920>;
>+ samsung,vl-height = <1080>;
>+
>+ samsung,vl-clkp;
>+ samsung,vl-dp;
>+ samsung,vl-bpix = <4>;
>+
>+ samsung,vl-hspw = <80>;
>+ samsung,vl-hbpd = <172>;
>+ samsung,vl-hfpd = <60>;
>+ samsung,vl-vspw = <10>;
>+ samsung,vl-vbpd = <25>;
>+ samsung,vl-vfpd = <10>;
>+ samsung,vl-cmd-allow-len = <0xf>;
>+
>+ samsung,winid = <3>;
>+ samsung,interface-mode = <1>;
>+ samsung,dp-enabled = <1>;
>+ samsung,dual-lcd-enabled = <0>;
>+ };
>+};
>diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
>index fb9bedd..b88722f 100644
>--- a/board/samsung/smdk5420/Kconfig
>+++ b/board/samsung/smdk5420/Kconfig
>@@ -1,3 +1,19 @@
>+if TARGET_PEACH_PI
>+
>+config SYS_BOARD
>+ string
>+ default "smdk5420"
>+
>+config SYS_VENDOR
>+ string
>+ default "samsung"
>+
>+config SYS_CONFIG_NAME
>+ string
>+ default "peach-pi"
>+
>+endif
>+
>if TARGET_PEACH_PIT
>
>config SYS_BOARD
>diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS
>index c8241a8..25813d5 100644
>--- a/board/samsung/smdk5420/MAINTAINERS
>+++ b/board/samsung/smdk5420/MAINTAINERS
>@@ -2,7 +2,9 @@ SMDK5420 BOARD
>M: Akshay Saraswat 
>S: Maintained
>F: board/samsung/smdk5420/
>+F: include/configs/peach-pi.h
>F: include/configs/peach-pit.h
>+F: configs/peach-pi_defconfig
>F: configs/peach-pit_defconfig
>
>SMDK5420 BOARD
>diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
>new file mode 100644
>index 0000000..8cb3946
>--- /dev/null
>+++ b/configs/peach-pi_defconfig
>@@ -0,0 +1,4 @@
>+CONFIG_SPL=y
>++S:CONFIG_ARM=y
>++S:CONFIG_ARCH_EXYNOS=y
>++S:CONFIG_TARGET_PEACH_PI=y
>diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420.h
>index d2a9556..9780050 100644
>--- a/include/configs/exynos5420.h
>+++ b/include/configs/exynos5420.h
>@@ -27,7 +27,7 @@
>
>#define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024)
>
>-#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420"
>+#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi exynos5420-peach-pit exynos5420-smdk5420"
>
>#define CONFIG_MAX_I2C_NUM 11
>
>diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
>new file mode 100644
>index 0000000..b66b781
>--- /dev/null
>+++ b/include/configs/peach-pi.h
>@@ -0,0 +1,35 @@
>+/*
>+ * Copyright (C) 2014 Samsung Electronics
>+ *
>+ * Configuration settings for the SAMSUNG/GOOGLE PEACH-PI board.
>+ *
>+ * SPDX-License-Identifier: GPL-2.0+
>+ */
>+
>+#ifndef __CONFIG_PEACH_PI_H
>+#define __CONFIG_PEACH_PI_H
>+
>+#include 
>+
>+#include 
>+
>+#undef CONFIG_DEFAULT_DEVICE_TREE
>+#define CONFIG_DEFAULT_DEVICE_TREE exynos5800-peach-pi
>+
>+/* select serial console configuration */
>+#define CONFIG_SERIAL3 /* use SERIAL 3 */
>+
>+#define CONFIG_SYS_PROMPT "Peach-pi # "
>+#define CONFIG_IDENT_STRING " for Peach-pi"
>+
>+#define CONFIG_VIDEO_PARADE
>+
>+/* Display */
>+#define CONFIG_LCD
>+#ifdef CONFIG_LCD
>+#define CONFIG_EXYNOS_FB
>+#define CONFIG_EXYNOS_DP
>+#define LCD_BPP LCD_COLOR16
>+#endif
>+
>+#endif /* __CONFIG_PEACH_PI_H */
>-- 
>1.9.1
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot

Regards,
Akshay Saraswat

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [U-Boot] [PATCH 1/2] WIP: Add support for pi
  2014-10-08  8:10 [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi Akshay Saraswat
@ 2014-10-08  8:10 ` Akshay Saraswat
  0 siblings, 0 replies; 2+ messages in thread
From: Akshay Saraswat @ 2014-10-08  8:10 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
---
 arch/arm/cpu/armv7/exynos/Kconfig    |   5 +-
 arch/arm/dts/Makefile                |   3 +-
 arch/arm/dts/exynos5800-peach-pi.dts | 157 +++++++++++++++++++++++++++++++++++
 board/samsung/smdk5420/Kconfig       |  16 ++++
 board/samsung/smdk5420/MAINTAINERS   |   2 +
 configs/peach-pi_defconfig           |   4 +
 include/configs/exynos5420.h         |   2 +-
 include/configs/peach-pi.h           |  35 ++++++++
 8 files changed, 221 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/exynos5800-peach-pi.dts
 create mode 100644 configs/peach-pi_defconfig
 create mode 100644 include/configs/peach-pi.h

diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index b6a558b..76c0faf 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -33,9 +33,12 @@ config TARGET_SNOW
 config TARGET_SMDK5420
 	bool "SMDK5420 board"
 
-config TARGET_PEACH_PIT
+config TARGET_PEACH_PI
 	bool "Peach Pi board"
 
+config TARGET_PEACH_PIT
+	bool "Peach Pit board"
+
 endchoice
 
 config SYS_CPU
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1ccd827..36e68d7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -8,7 +8,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5420-smdk5420.dtb \
-	exynos5420-peach-pit.dtb
+	exynos5420-peach-pit.dtb \
+	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
new file mode 100644
index 0000000..1c6aa8f
--- /dev/null
+++ b/arch/arm/dts/exynos5800-peach-pi.dts
@@ -0,0 +1,157 @@
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos54xx.dtsi"
+
+/ {
+	model = "Samsung/Google Peach Pi board based on Exynos5800";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5800", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial at 12C30000";
+		console = "/serial at 12C30000";
+		pmic = "/i2c at 12ca0000";
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <1700000000>;
+	};
+
+	tmu at 10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c at 12ca0000 {
+		clock-frequency = <400000>;
+		power-regulator at 9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	i2c at 12cd0000 { /* i2c7 */
+		clock-frequency = <100000>;
+	       soundcodec at 20 {
+	              reg = <0x20>;
+	              compatible = "maxim,max98090-codec";
+	       };
+
+	        edp-lvds-bridge at 48 {
+	                compatible = "parade,ps8625";
+	                reg = <0x48>;
+	        };
+	};
+
+        sound at 3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c at 12e10000 { /* i2c9 */
+		clock-frequency = <400000>;
+                tpm at 20 {
+                        compatible = "infineon,slb9645-tpm";
+                        reg = <0x20>;
+		};
+	};
+
+	spi at 12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash at 0 {
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	spi at 12d40000 { /* spi2 */
+		spi-max-frequency = <4000000>;
+		spi-deactivate-delay = <200>;
+		cros-ec at 0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-half-duplex;
+			spi-max-timeout-ms = <1100>;
+			spi-frame-header = <0xec>;
+			ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+
+			/*
+			 * This describes the flash memory within the EC. Note
+			 * that the STM32L flash erases to 0, not 0xff.
+			 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			flash at 8000000 {
+				reg = <0x08000000 0x20000>;
+				erase-value = <0>;
+			};
+		};
+	};
+
+	xhci at 12000000 {
+		samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+	};
+
+	xhci at 12400000 {
+		samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+	};
+
+	fimd at 14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1920>;
+		samsung,vl-row = <1080>;
+		samsung,vl-width = <1920>;
+		samsung,vl-height = <1080>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <80>;
+		samsung,vl-hbpd = <172>;
+		samsung,vl-hfpd = <60>;
+		samsung,vl-vspw = <10>;
+		samsung,vl-vbpd = <25>;
+		samsung,vl-vfpd = <10>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+};
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index fb9bedd..b88722f 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -1,3 +1,19 @@
+if TARGET_PEACH_PI
+
+config SYS_BOARD
+	string
+	default "smdk5420"
+
+config SYS_VENDOR
+	string
+	default "samsung"
+
+config SYS_CONFIG_NAME
+	string
+	default "peach-pi"
+
+endif
+
 if TARGET_PEACH_PIT
 
 config SYS_BOARD
diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS
index c8241a8..25813d5 100644
--- a/board/samsung/smdk5420/MAINTAINERS
+++ b/board/samsung/smdk5420/MAINTAINERS
@@ -2,7 +2,9 @@ SMDK5420 BOARD
 M:	Akshay Saraswat <akshay.s@samsung.com>
 S:	Maintained
 F:	board/samsung/smdk5420/
+F:	include/configs/peach-pi.h
 F:	include/configs/peach-pit.h
+F:	configs/peach-pi_defconfig
 F:	configs/peach-pit_defconfig
 
 SMDK5420 BOARD
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
new file mode 100644
index 0000000..8cb3946
--- /dev/null
+++ b/configs/peach-pi_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_EXYNOS=y
++S:CONFIG_TARGET_PEACH_PI=y
diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420.h
index d2a9556..9780050 100644
--- a/include/configs/exynos5420.h
+++ b/include/configs/exynos5420.h
@@ -27,7 +27,7 @@
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(30 * 1024)
 
-#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420"
+#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi exynos5420-peach-pit exynos5420-smdk5420"
 
 #define CONFIG_MAX_I2C_NUM	11
 
diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
new file mode 100644
index 0000000..b66b781
--- /dev/null
+++ b/include/configs/peach-pi.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG/GOOGLE PEACH-PI board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEACH_PI_H
+#define __CONFIG_PEACH_PI_H
+
+#include <configs/exynos5-dt.h>
+
+#include <configs/exynos5420.h>
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE	exynos5800-peach-pi
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3		/* use SERIAL 3 */
+
+#define CONFIG_SYS_PROMPT	"Peach-pi # "
+#define CONFIG_IDENT_STRING	" for Peach-pi"
+
+#define CONFIG_VIDEO_PARADE
+
+/* Display */
+#define CONFIG_LCD
+#ifdef CONFIG_LCD
+#define CONFIG_EXYNOS_FB
+#define CONFIG_EXYNOS_DP
+#define LCD_BPP			LCD_COLOR16
+#endif
+
+#endif	/* __CONFIG_PEACH_PI_H */
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2014-10-08  9:20 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-08  9:20 [U-Boot] [PATCH 1/2] WIP: Add support for pi Akshay Saraswat
  -- strict thread matches above, loose matches on Subject: below --
2014-10-08  8:10 [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi Akshay Saraswat
2014-10-08  8:10 ` [U-Boot] [PATCH 1/2] WIP: Add support for pi Akshay Saraswat

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.