[PATCH 5/5] mmc: host: vub300.c: Cleaning up missing null-terminate by switching from strncpy to strzcpy

[PATCH 5/5] mmc: host: vub300.c: Cleaning up missing null-terminate by switching from strncpy to strzcpy

[Rickard Strandqvist]

Ensures that the string is null-terminate in connection with the
use of strncpy, by switching from strncpy to strzcpy.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
---
 drivers/mmc/host/vub300.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 4262296..191e649 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -515,7 +515,7 @@ static void new_system_port_status(struct vub300_mmc_host *vub300)
 		vub300->card_present = 1;
 		vub300->bus_width = 0;
 		if (disable_offload_processing)
-			strncpy(vub300->vub_name, "EMPTY Processing Disabled",
+			strzcpy(vub300->vub_name, "EMPTY Processing Disabled",
 				sizeof(vub300->vub_name));
 		else
 			vub300->vub_name[0] = 0;
@@ -1222,7 +1222,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 		dev_err(&vub300->udev->dev,
 			"corrupt offload pseudocode in firmware %s\n",
 			vub300->vub_name);
-		strncpy(vub300->vub_name, "corrupt offload pseudocode",
+		strzcpy(vub300->vub_name, "corrupt offload pseudocode",
 			sizeof(vub300->vub_name));
 		return;
 	}
@@ -1250,7 +1250,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 						xfer_buffer, xfer_length, HZ);
 			kfree(xfer_buffer);
 			if (retval < 0) {
-				strncpy(vub300->vub_name,
+				strzcpy(vub300->vub_name,
 					"SDIO pseudocode download failed",
 					sizeof(vub300->vub_name));
 				return;
@@ -1260,7 +1260,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 				"not enough memory for xfer buffer to send"
 				" INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
 				vub300->vub_name);
-			strncpy(vub300->vub_name,
+			strzcpy(vub300->vub_name,
 				"SDIO interrupt pseudocode download failed",
 				sizeof(vub300->vub_name));
 			return;
@@ -1269,7 +1269,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 		dev_err(&vub300->udev->dev,
 			"corrupt interrupt pseudocode in firmware %s %s\n",
 			fw->data, vub300->vub_name);
-		strncpy(vub300->vub_name, "corrupt interrupt pseudocode",
+		strzcpy(vub300->vub_name, "corrupt interrupt pseudocode",
 			sizeof(vub300->vub_name));
 		return;
 	}
@@ -1297,7 +1297,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 						xfer_buffer, xfer_length, HZ);
 			kfree(xfer_buffer);
 			if (retval < 0) {
-				strncpy(vub300->vub_name,
+				strzcpy(vub300->vub_name,
 					"SDIO pseudocode download failed",
 					sizeof(vub300->vub_name));
 				return;
@@ -1307,7 +1307,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 				"not enough memory for xfer buffer to send"
 				" TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
 				vub300->vub_name);
-			strncpy(vub300->vub_name,
+			strzcpy(vub300->vub_name,
 				"SDIO transfer pseudocode download failed",
 				sizeof(vub300->vub_name));
 			return;
@@ -1316,7 +1316,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 		dev_err(&vub300->udev->dev,
 			"corrupt transfer pseudocode in firmware %s %s\n",
 			fw->data, vub300->vub_name);
-		strncpy(vub300->vub_name, "corrupt transfer pseudocode",
+		strzcpy(vub300->vub_name, "corrupt transfer pseudocode",
 			sizeof(vub300->vub_name));
 		return;
 	}
@@ -1350,7 +1350,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 		dev_err(&vub300->udev->dev,
 			"corrupt dynamic registers in firmware %s\n",
 			vub300->vub_name);
-		strncpy(vub300->vub_name, "corrupt dynamic registers",
+		strzcpy(vub300->vub_name, "corrupt dynamic registers",
 			sizeof(vub300->vub_name));
 		return;
 	}
@@ -1380,11 +1380,11 @@ static void download_offload_pseudocode(struct vub300_mmc_host *vub300)
 		 vub300->vub_name);
 	retval = request_firmware(&fw, vub300->vub_name, &card->dev);
 	if (retval < 0) {
-		strncpy(vub300->vub_name, "vub_default.bin",
+		strzcpy(vub300->vub_name, "vub_default.bin",
 			sizeof(vub300->vub_name));
 		retval = request_firmware(&fw, vub300->vub_name, &card->dev);
 		if (retval < 0) {
-			strncpy(vub300->vub_name,
+			strzcpy(vub300->vub_name,
 				"no SDIO offload firmware found",
 				sizeof(vub300->vub_name));
 		} else {
@@ -1766,7 +1766,7 @@ static void vub300_cmndwork_thread(struct work_struct *work)
 			 * has been already downloaded to the VUB300 chip
 			 */
 		} else if (0 == vub300->mmc->card->sdio_funcs) {
-			strncpy(vub300->vub_name, "SD memory device",
+			strzcpy(vub300->vub_name, "SD memory device",
 				sizeof(vub300->vub_name));
 		} else {
 			download_offload_pseudocode(vub300);
-- 
1.7.10.4