* [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses
@ 2014-10-20 1:48 Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
` (24 more replies)
0 siblings, 25 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This patch series first zaps a couple of ancient boards and ugly
code which was in the way of proper cleanup for the eeprom command.
Once that is done, the eeprom command undergoes proper cleaning.
Finally, there is one patch which adds support for selecting on
which bus the I2C EEPROM is. This functionality seems to be in
high demand, which is exactly the reason why some boards decided
to implement this themselves :-(
This series makes U-Boot also less IoT, since it removes all the
nice PHP, CSS and SQL stuff from it ;-)
Marek Vasut (25):
ppc: Zap ICU862 board
ppc: Zap MHPC board
ppc: Zap Hymod board
ppc: Zap HWW1U1A board
ppc: Zap IDS8247 board
ppc: Zap TQM8260 board
ppc: Zap TQM8272 board
arm: Zap tricorder-eeprom
eeprom: Shuffle code around
eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS
eeprom: Zap CONFIG_SYS_EEPROM_X40430
eeprom: Zap eeprom_probe()
eeprom: Zap CONFIG_SPI_X
eeprom: Pull out the I/O code
eeprom: Pull out address computation
eeprom: Make eeprom_write_enable() weak
eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
eeprom: Suck the ifdef into eeprom_init()
eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
eeprom: Pull out transfer length computation
eeprom: Pull out the RW loop
eeprom: Cultivate the ifdef mess
eeprom: Add bus argument to eeprom_init()
eeprom: Add support for selecting i2c bus
eeprom: Clean up checkpatch issues
README | 5 -
arch/powerpc/cpu/mpc8260/Kconfig | 16 -
arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +-
arch/powerpc/cpu/mpc8260/interrupts.c | 10 +-
arch/powerpc/cpu/mpc8260/pci.c | 2 -
arch/powerpc/cpu/mpc8260/start.S | 14 -
arch/powerpc/cpu/mpc83xx/start.S | 11 -
arch/powerpc/cpu/mpc85xx/Kconfig | 4 -
arch/powerpc/cpu/mpc8xx/Kconfig | 8 -
arch/powerpc/cpu/mpc8xx/cpu_init.c | 2 -
arch/powerpc/cpu/mpc8xx/fec.c | 40 +-
arch/powerpc/include/asm/u-boot.h | 3 -
board/corscience/tricorder/Makefile | 2 +-
board/corscience/tricorder/tricorder-eeprom.c | 251 -------
board/corscience/tricorder/tricorder-eeprom.h | 41 --
board/eltec/mhpc/Kconfig | 12 -
board/eltec/mhpc/MAINTAINERS | 6 -
board/eltec/mhpc/Makefile | 8 -
board/eltec/mhpc/flash.c | 414 -----------
board/eltec/mhpc/mhpc.c | 465 -------------
board/eltec/mhpc/u-boot.lds.debug | 121 ----
board/exmeritus/hww1u1a/Kconfig | 12 -
board/exmeritus/hww1u1a/MAINTAINERS | 6 -
board/exmeritus/hww1u1a/Makefile | 12 -
board/exmeritus/hww1u1a/ddr.c | 34 -
board/exmeritus/hww1u1a/gpios.h | 56 --
board/exmeritus/hww1u1a/hww1u1a.c | 268 --------
board/exmeritus/hww1u1a/law.c | 18 -
board/exmeritus/hww1u1a/tlb.c | 90 ---
board/hymod/Kconfig | 9 -
board/hymod/MAINTAINERS | 6 -
board/hymod/Makefile | 8 -
board/hymod/bsp.c | 387 -----------
board/hymod/config.mk | 14 -
board/hymod/eeprom.c | 678 ------------------
board/hymod/env.c | 221 ------
board/hymod/fetch.c | 91 ---
board/hymod/flash.c | 490 -------------
board/hymod/flash.h | 140 ----
board/hymod/global_env | 145 ----
board/hymod/hymod.c | 521 --------------
board/hymod/hymod.h | 305 ---------
board/hymod/input.c | 91 ---
board/hymod/u-boot.lds | 132 ----
board/hymod/u-boot.lds.debug | 121 ----
board/icu862/Kconfig | 9 -
board/icu862/MAINTAINERS | 7 -
board/icu862/Makefile | 8 -
board/icu862/flash.c | 575 ----------------
board/icu862/icu862.c | 199 ------
board/icu862/pcmcia.c | 262 -------
board/icu862/u-boot.lds | 82 ---
board/icu862/u-boot.lds.debug | 122 ----
board/ids/ids8247/Kconfig | 12 -
board/ids/ids8247/MAINTAINERS | 6 -
board/ids/ids8247/Makefile | 11 -
board/ids/ids8247/ids8247.c | 390 -----------
board/tqc/tqm8260/Kconfig | 12 -
board/tqc/tqm8260/MAINTAINERS | 16 -
board/tqc/tqm8260/Makefile | 8 -
board/tqc/tqm8260/README | 415 -----------
board/tqc/tqm8260/tqm8260.c | 352 ----------
board/tqc/tqm8272/Kconfig | 12 -
board/tqc/tqm8272/MAINTAINERS | 6 -
board/tqc/tqm8272/Makefile | 8 -
board/tqc/tqm8272/nand.c | 264 -------
board/tqc/tqm8272/tqm8272.c | 944 --------------------------
board/tqc/tqm8272/tqm8272.h | 37 -
common/cmd_eeprom.c | 501 +++++---------
common/env_eeprom.c | 4 +-
configs/HWW1U1A_defconfig | 3 -
configs/ICU862_100MHz_defconfig | 4 -
configs/ICU862_defconfig | 3 -
configs/IDS8247_defconfig | 3 -
configs/MHPC_defconfig | 3 -
configs/TQM8255_AA_defconfig | 4 -
configs/TQM8260_AA_defconfig | 4 -
configs/TQM8260_AB_defconfig | 4 -
configs/TQM8260_AC_defconfig | 4 -
configs/TQM8260_AD_defconfig | 4 -
configs/TQM8260_AE_defconfig | 4 -
configs/TQM8260_AF_defconfig | 4 -
configs/TQM8260_AG_defconfig | 4 -
configs/TQM8260_AH_defconfig | 4 -
configs/TQM8260_AI_defconfig | 4 -
configs/TQM8265_AA_defconfig | 4 -
configs/TQM8272_defconfig | 3 -
configs/hymod_defconfig | 3 -
include/asm-generic/u-boot.h | 3 -
include/common.h | 8 +-
include/commproc.h | 32 -
include/configs/BSC9131RDB.h | 1 -
include/configs/BSC9132QDS.h | 1 -
include/configs/C29XPCIE.h | 1 -
include/configs/CPCI405AB.h | 1 -
include/configs/CPCI750.h | 1 -
include/configs/DB64360.h | 1 -
include/configs/DB64460.h | 1 -
include/configs/DU440.h | 1 -
include/configs/HWW1U1A.h | 460 -------------
include/configs/ICU862.h | 443 ------------
include/configs/IDS8247.h | 462 -------------
include/configs/MHPC.h | 369 ----------
include/configs/P1010RDB.h | 1 -
include/configs/PMC440.h | 1 -
include/configs/TQM8260.h | 620 -----------------
include/configs/TQM8272.h | 735 --------------------
include/configs/TQM834x.h | 1 -
include/configs/W7OLMC.h | 1 -
include/configs/W7OLMG.h | 1 -
include/configs/acadia.h | 1 -
include/configs/am335x_evm.h | 1 -
include/configs/am43xx_evm.h | 1 -
include/configs/axs101.h | 1 -
include/configs/bamboo.h | 1 -
include/configs/canyonlands.h | 1 -
include/configs/cpci5200.h | 1 -
include/configs/ebony.h | 1 -
include/configs/hymod.h | 728 --------------------
include/configs/icon.h | 1 -
include/configs/intip.h | 1 -
include/configs/katmai.h | 1 -
include/configs/km/km-powerpc.h | 1 -
include/configs/km/km_arm.h | 1 -
include/configs/korat.h | 1 -
include/configs/ks2_evm.h | 1 -
include/configs/luan.h | 1 -
include/configs/m28evk.h | 1 -
include/configs/mecp5200.h | 1 -
include/configs/motionpro.h | 1 -
include/configs/ocotea.h | 1 -
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/pcm051.h | 1 -
include/configs/pengwyn.h | 1 -
include/configs/pf5200.h | 1 -
include/configs/sequoia.h | 1 -
include/configs/t3corp.h | 1 -
include/configs/taishan.h | 1 -
include/configs/tricorder.h | 1 -
include/configs/walnut.h | 1 -
include/configs/yosemite.h | 1 -
include/pcmcia.h | 2 -
include/status_led.h | 19 -
tools/bddb/README | 116 ----
tools/bddb/badsubmit.php | 23 -
tools/bddb/bddb.css | 207 ------
tools/bddb/brlog.php | 109 ---
tools/bddb/browse.php | 147 ----
tools/bddb/config.php | 16 -
tools/bddb/create_tables.sql | 90 ---
tools/bddb/defs.php | 710 -------------------
tools/bddb/dodelete.php | 65 --
tools/bddb/dodellog.php | 57 --
tools/bddb/doedit.php | 186 -----
tools/bddb/doedlog.php | 76 ---
tools/bddb/donew.php | 230 -------
tools/bddb/donewlog.php | 86 ---
tools/bddb/edit.php | 131 ----
tools/bddb/edlog.php | 86 ---
tools/bddb/execute.php | 33 -
tools/bddb/index.php | 38 --
tools/bddb/new.php | 120 ----
tools/bddb/newlog.php | 54 --
164 files changed, 174 insertions(+), 15976 deletions(-)
delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c
delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h
delete mode 100644 board/eltec/mhpc/Kconfig
delete mode 100644 board/eltec/mhpc/MAINTAINERS
delete mode 100644 board/eltec/mhpc/Makefile
delete mode 100644 board/eltec/mhpc/flash.c
delete mode 100644 board/eltec/mhpc/mhpc.c
delete mode 100644 board/eltec/mhpc/u-boot.lds.debug
delete mode 100644 board/exmeritus/hww1u1a/Kconfig
delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS
delete mode 100644 board/exmeritus/hww1u1a/Makefile
delete mode 100644 board/exmeritus/hww1u1a/ddr.c
delete mode 100644 board/exmeritus/hww1u1a/gpios.h
delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c
delete mode 100644 board/exmeritus/hww1u1a/law.c
delete mode 100644 board/exmeritus/hww1u1a/tlb.c
delete mode 100644 board/hymod/Kconfig
delete mode 100644 board/hymod/MAINTAINERS
delete mode 100644 board/hymod/Makefile
delete mode 100644 board/hymod/bsp.c
delete mode 100644 board/hymod/config.mk
delete mode 100644 board/hymod/eeprom.c
delete mode 100644 board/hymod/env.c
delete mode 100644 board/hymod/fetch.c
delete mode 100644 board/hymod/flash.c
delete mode 100644 board/hymod/flash.h
delete mode 100644 board/hymod/global_env
delete mode 100644 board/hymod/hymod.c
delete mode 100644 board/hymod/hymod.h
delete mode 100644 board/hymod/input.c
delete mode 100644 board/hymod/u-boot.lds
delete mode 100644 board/hymod/u-boot.lds.debug
delete mode 100644 board/icu862/Kconfig
delete mode 100644 board/icu862/MAINTAINERS
delete mode 100644 board/icu862/Makefile
delete mode 100644 board/icu862/flash.c
delete mode 100644 board/icu862/icu862.c
delete mode 100644 board/icu862/pcmcia.c
delete mode 100644 board/icu862/u-boot.lds
delete mode 100644 board/icu862/u-boot.lds.debug
delete mode 100644 board/ids/ids8247/Kconfig
delete mode 100644 board/ids/ids8247/MAINTAINERS
delete mode 100644 board/ids/ids8247/Makefile
delete mode 100644 board/ids/ids8247/ids8247.c
delete mode 100644 board/tqc/tqm8260/Kconfig
delete mode 100644 board/tqc/tqm8260/MAINTAINERS
delete mode 100644 board/tqc/tqm8260/Makefile
delete mode 100644 board/tqc/tqm8260/README
delete mode 100644 board/tqc/tqm8260/tqm8260.c
delete mode 100644 board/tqc/tqm8272/Kconfig
delete mode 100644 board/tqc/tqm8272/MAINTAINERS
delete mode 100644 board/tqc/tqm8272/Makefile
delete mode 100644 board/tqc/tqm8272/nand.c
delete mode 100644 board/tqc/tqm8272/tqm8272.c
delete mode 100644 board/tqc/tqm8272/tqm8272.h
delete mode 100644 configs/HWW1U1A_defconfig
delete mode 100644 configs/ICU862_100MHz_defconfig
delete mode 100644 configs/ICU862_defconfig
delete mode 100644 configs/IDS8247_defconfig
delete mode 100644 configs/MHPC_defconfig
delete mode 100644 configs/TQM8255_AA_defconfig
delete mode 100644 configs/TQM8260_AA_defconfig
delete mode 100644 configs/TQM8260_AB_defconfig
delete mode 100644 configs/TQM8260_AC_defconfig
delete mode 100644 configs/TQM8260_AD_defconfig
delete mode 100644 configs/TQM8260_AE_defconfig
delete mode 100644 configs/TQM8260_AF_defconfig
delete mode 100644 configs/TQM8260_AG_defconfig
delete mode 100644 configs/TQM8260_AH_defconfig
delete mode 100644 configs/TQM8260_AI_defconfig
delete mode 100644 configs/TQM8265_AA_defconfig
delete mode 100644 configs/TQM8272_defconfig
delete mode 100644 configs/hymod_defconfig
delete mode 100644 include/configs/HWW1U1A.h
delete mode 100644 include/configs/ICU862.h
delete mode 100644 include/configs/IDS8247.h
delete mode 100644 include/configs/MHPC.h
delete mode 100644 include/configs/TQM8260.h
delete mode 100644 include/configs/TQM8272.h
delete mode 100644 include/configs/hymod.h
delete mode 100644 tools/bddb/README
delete mode 100644 tools/bddb/badsubmit.php
delete mode 100644 tools/bddb/bddb.css
delete mode 100644 tools/bddb/brlog.php
delete mode 100644 tools/bddb/browse.php
delete mode 100644 tools/bddb/config.php
delete mode 100644 tools/bddb/create_tables.sql
delete mode 100644 tools/bddb/defs.php
delete mode 100644 tools/bddb/dodelete.php
delete mode 100644 tools/bddb/dodellog.php
delete mode 100644 tools/bddb/doedit.php
delete mode 100644 tools/bddb/doedlog.php
delete mode 100644 tools/bddb/donew.php
delete mode 100644 tools/bddb/donewlog.php
delete mode 100644 tools/bddb/edit.php
delete mode 100644 tools/bddb/edlog.php
delete mode 100644 tools/bddb/execute.php
delete mode 100644 tools/bddb/index.php
delete mode 100644 tools/bddb/new.php
delete mode 100644 tools/bddb/newlog.php
Cc: Tom Rini <trini@ti.com>
--
2.1.1
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 3:54 ` Masahiro Yamada
2014-10-20 19:07 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 02/25] ppc: Zap MHPC board Marek Vasut
` (23 subsequent siblings)
24 siblings, 2 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
it so the EEPROM command code can be cleansed of the related code
as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8xx/Kconfig | 4 -
arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 -
arch/powerpc/cpu/mpc8xx/fec.c | 40 +--
board/icu862/Kconfig | 9 -
board/icu862/MAINTAINERS | 7 -
board/icu862/Makefile | 8 -
board/icu862/flash.c | 575 -------------------------------------
board/icu862/icu862.c | 199 -------------
board/icu862/pcmcia.c | 262 -----------------
board/icu862/u-boot.lds | 82 ------
board/icu862/u-boot.lds.debug | 122 --------
configs/ICU862_100MHz_defconfig | 4 -
configs/ICU862_defconfig | 3 -
include/commproc.h | 10 -
include/configs/ICU862.h | 443 ----------------------------
include/pcmcia.h | 2 -
include/status_led.h | 19 --
17 files changed, 1 insertion(+), 1789 deletions(-)
delete mode 100644 board/icu862/Kconfig
delete mode 100644 board/icu862/MAINTAINERS
delete mode 100644 board/icu862/Makefile
delete mode 100644 board/icu862/flash.c
delete mode 100644 board/icu862/icu862.c
delete mode 100644 board/icu862/pcmcia.c
delete mode 100644 board/icu862/u-boot.lds
delete mode 100644 board/icu862/u-boot.lds.debug
delete mode 100644 configs/ICU862_100MHz_defconfig
delete mode 100644 configs/ICU862_defconfig
delete mode 100644 include/configs/ICU862.h
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index f1dca90..171bee9 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -16,9 +16,6 @@ config TARGET_ESTEEM192E
config TARGET_HERMES
bool "Support hermes"
-config TARGET_ICU862
- bool "Support ICU862"
-
config TARGET_IP860
bool "Support IP860"
@@ -124,7 +121,6 @@ source "board/eltec/mhpc/Kconfig"
source "board/emk/top860/Kconfig"
source "board/esteem192e/Kconfig"
source "board/hermes/Kconfig"
-source "board/icu862/Kconfig"
source "board/ip860/Kconfig"
source "board/ivm/Kconfig"
source "board/kup/kup4k/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 90c7e61..b8dc14d 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -126,7 +126,6 @@ void cpu_init_f (volatile immap_t * immr)
*/
#if defined(CONFIG_HERMES) || \
- defined(CONFIG_ICU862) || \
defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index d12b3df..22b8ec7 100644
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -205,11 +205,7 @@ static int fec_send(struct eth_device *dev, void *packet, int length)
j = 0;
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-#if defined(CONFIG_ICU862)
- udelay(10);
-#else
udelay(1);
-#endif
j++;
}
if (j>=TOUT_LOOP) {
@@ -424,7 +420,7 @@ static void fec_pin_init(int fecidx)
#endif /* !CONFIG_RMII */
-#elif !defined(CONFIG_ICU862)
+#else
/*
* Configure all of port D for MII.
*/
@@ -437,42 +433,8 @@ static void fec_pin_init(int fecidx)
immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
else
immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-#else
- /*
- * Configure port A for MII.
- */
-
-#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
-
- /*
- * On the ICU862 board the MII-MDC pin is routed to PD8 pin
- * * of CPU, so for this board we need to configure Utopia and
- * * enable PD8 to MII-MDC function
- */
- immr->im_ioport.iop_pdpar |= 0x4080;
#endif
- /*
- * Has Utopia been configured?
- */
- if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
- /*
- * YES - Use MUXED mode for UTOPIA bus.
- * This frees Port A for use by MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode &= ~0x80;
- } else {
- /*
- * NO - set SPLIT mode for UTOPIA bus.
- *
- * This doesn't really effect UTOPIA (which isn't
- * enabled anyway) but just tells the 862
- * to use port A for MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode |= 0x80;
- }
-#endif /* !defined(CONFIG_ICU862) */
-
#endif /* CONFIG_ETHER_ON_FEC1 */
} else if (fecidx == 1) {
diff --git a/board/icu862/Kconfig b/board/icu862/Kconfig
deleted file mode 100644
index da11d7b..0000000
--- a/board/icu862/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ICU862
-
-config SYS_BOARD
- default "icu862"
-
-config SYS_CONFIG_NAME
- default "ICU862"
-
-endif
diff --git a/board/icu862/MAINTAINERS b/board/icu862/MAINTAINERS
deleted file mode 100644
index 7fe16d1..0000000
--- a/board/icu862/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-ICU862 BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/icu862/
-F: include/configs/ICU862.h
-F: configs/ICU862_defconfig
-F: configs/ICU862_100MHz_defconfig
diff --git a/board/icu862/Makefile b/board/icu862/Makefile
deleted file mode 100644
index 263f21b..0000000
--- a/board/icu862/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = icu862.o flash.o pcmcia.o
diff --git a/board/icu862/flash.c b/board/icu862/flash.c
deleted file mode 100644
index a84ab99..0000000
--- a/board/icu862/flash.c
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0,
- size_b0 >> 20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[0]);
-#endif
-
- /* ICU862 Board has only one Flash Bank */
- flash_info[0].size = size_b0;
-
- return size_b0;
-
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
- ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM033C)) {
- /* set sector offsets for uniform sector type */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00040000);
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- puts ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: puts ("AMD "); break;
- case FLASH_MAN_FUJ: puts ("FUJITSU "); break;
- case FLASH_MAN_BM: puts ("BRIGHT MICRO "); break;
- default: puts ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: puts ("29F040/29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: puts ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: puts ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: puts ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: puts ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: puts ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: puts ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: puts ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: puts ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_AM033C: puts ("AM29LV033C (32 Mbit)\n");
- break;
- default: puts ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- puts (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- puts ("\n ");
- }
-
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
-
- puts ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
-#if 0
- ulong base = (ulong)addr;
-#endif
- uchar value;
-
- /* Write auto select command: read Manufacturer ID */
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x90909090;
-#endif
-
- value = addr[0];
-
- switch (value + (value << 16)) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- value = addr[1]; /* device ID */
-
- switch ((unsigned long)value) {
- case AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- case AMD_ID_LV033C:
- info->flash_id += FLASH_AM033C;
- info->sector_count = 64;
- info->size = 0x01000000;
- break; /* => 16Mb */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
-#if 0
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-#else
- flash_get_offsets ((ulong)addr, &flash_info[0]);
-#endif
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
-#if 1
- /* We don't know why it happens, but on ICU Board *
- * for AMD29033C flash we need to resend the command of *
- * reading flash protection for upper 8 Mb of flash */
- if ( i == 32 ) {
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x90909090;
- }
-#endif
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-#if 0
- *addr = 0x00F000F0; /* reset bank */
-#else
- *addr = 0xF0F0F0F0; /* reset bank */
-#endif
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- puts ("- missing\n");
- } else {
- puts ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- puts ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- puts ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x80808080;
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
-#endif
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
-#if 0
- addr[0] = 0x00300030;
-#else
- addr[0] = 0x30303030;
-#endif
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
-#if 0
- while ((addr[0] & 0x00800080) != 0x00800080)
-#else
- while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
-#endif
- {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- puts ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
-#if 0
- addr[0] = 0x00F000F0; /* reset bank */
-#else
- addr[0] = 0xF0F0F0F0; /* reset bank */
-#endif
-
- puts (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0xA0A0A0A0;
-#endif
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
-#if 0
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
-#else
- while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
-#endif
- {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/icu862/icu862.c b/board/icu862/icu862.c
deleted file mode 100644
index 4c0e919..0000000
--- a/board/icu862/icu862.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-/*
- * Memory Controller Using
- *
- * CS0 - Flash memory (0x40000000)
- * CS1 - SDRAM (0x00000000}
- * CS2 - S/UNI Ultra ATM155
- * CS3 - IDT 77106 ATM25
- * CS4 - DSP HPI
- * CS5 - E1/T1 Interface device
- * CS6 - PCMCIA device
- * CS7 - PCMCIA device
- */
-
-/* ------------------------------------------------------------------------- */
-
-#define _not_used_ 0xffffffff
-
-const uint sdram_table[] = {
- /* single read. (offset 0 in upm RAM) */
- 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
- 0x1ff77c47,
-
- /* MRS initialization (offset 5) */
-
- 0x1ff77c34, 0xefeabc34, 0x1fb57c35,
-
- /* burst read. (offset 8 in upm RAM) */
- 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
- 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
- _not_used_, _not_used_, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
-
- /* single write. (offset 18 in upm RAM) */
- 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
- _not_used_, _not_used_, _not_used_, _not_used_,
-
- /* burst write. (offset 20 in upm RAM) */
- 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
- 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
-
- /* refresh. (offset 30 in upm RAM) */
- 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
-
- /* exception. (offset 3c in upm RAM) */
- 0x7ffffc07, _not_used_, _not_used_, _not_used_
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- puts ("Board: ICU862 Board\n");
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size8, size9;
- long int size_b0 = 0;
- unsigned long reg;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller bank 1 to the SDRAM bank at
- * preliminary address - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
- udelay (200);
- memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */
- udelay (200);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE1_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE1_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration@9 columns */
- size_b0 = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size_b0 = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type, both banks
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if ((size_b0 < 0x02000000)) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
- udelay (1000);
- }
-
- /*
- * Final mapping
- */
-
- memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
-
- udelay (10000);
-
- return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
diff --git a/board/icu862/pcmcia.c b/board/icu862/pcmcia.c
deleted file mode 100644
index dbe3c3c..0000000
--- a/board/icu862/pcmcia.c
+++ /dev/null
@@ -1,262 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "ICU862"
-
-static void cfg_port_B (void)
-{
- volatile cpm8xx_t *cp;
- uint reg;
-
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /*
- * Configure Port B for TPS2205 PC-Card Power-Interface Switch
- *
- * Switch off all voltages, assert shutdown
- */
- reg = cp->cp_pbdat;
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC3 | TPS2205_VCC5 | /* VAVCC => Hi-Z */
- TPS2205_SHDN); /* enable switch */
- cp->cp_pbdat = reg;
-
- cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
-
- reg = cp->cp_pbdir & ~(TPS2205_INPUTS);
- cp->cp_pbdir = reg | TPS2205_OUTPUTS;
-
- debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
- cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, pipr, mask;
- int i;
-
- debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- udelay(10000);
-
- sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
- cfg_port_B ();
-
- /*
- * Configure SIUMCR to enable PCMCIA port B
- * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
- */
- sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
- printf (" No Card found\n");
- return (1);
- }
-
- /*
- * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
- */
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- pipr = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- pipr,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
-
- reg = cp->cp_pbdat;
- if ((pipr & mask) == mask) {
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC3); /* 3V off */
- reg &= ~(TPS2205_VCC5); /* 5V on */
- puts (" 5.0V card found: ");
- } else {
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC5); /* 5V off */
- reg &= ~(TPS2205_VCC3); /* 3V on */
- puts (" 3.3V card found: ");
- }
-
- debug ("\nPB DAT: %08x -> 3.3V %s 5.0V %s VPP_PGM %s VPP_VCC %s\n",
- reg,
- (reg & TPS2205_VCC3) ? "off" : "on",
- (reg & TPS2205_VCC5) ? "off" : "on",
- (reg & TPS2205_VPP_PGM) ? "off" : "on",
- (reg & TPS2205_VPP_VCC) ? "off" : "on" );
-
- cp->cp_pbdat = reg;
-
- /* Wait 500 ms; use this to check for over-current */
- for (i=0; i<5000; ++i) {
- if ((cp->cp_pbdat & TPS2205_OC) == 0) {
- printf (" *** Overcurrent - Safety shutdown ***\n");
- cp->cp_pbdat &= ~(TPS2205_SHDN);
- return (1);
- }
- udelay (100);
- }
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* Shut down */
- cp->cp_pbdat &= ~(TPS2205_SHDN);
-
- /* Configure PCMCIA General Control Register */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(10000);
-
- return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("voltage_set: "
- PCMCIA_BOARD_MSG
- " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
- 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Configure Port C pins for
- * 5 Volts Enable and 3 Volts enable,
- * Turn all power pins to Hi-Z
- */
- debug ("PCMCIA power OFF\n");
- cfg_port_B (); /* Enables switch, but all in Hi-Z */
-
- reg = cp->cp_pbdat;
-
- switch(vcc) {
- case 0: break; /* Switch off */
- case 33: reg &= ~TPS2205_VCC3; break; /* Switch on 3.3V */
- case 50: reg &= ~TPS2205_VCC5; break; /* Switch on 5.0V */
- default: goto done;
- }
-
- /* Checking supported voltages */
-
- debug ("PIPR: 0x%x --> %s\n",
- pcmp->pcmc_pipr,
- (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
- cp->cp_pbdat = reg;
-
-#ifdef DEBUG
-{
- char *s;
-
- if ((reg & TPS2205_VCC3) == 0) {
- s = "at 3.3V";
- } else if ((reg & TPS2205_VCC5) == 0) {
- s = "at 5.0V";
- } else {
- s = "down";
- }
- printf ("PCMCIA powered %s\n", s);
-}
-#endif
-
-done:
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
- slot+'A');
- return (0);
-}
-
-#endif /* CONFIG_PCMCIA */
diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds
deleted file mode 100644
index 00f63d2..0000000
--- a/board/icu862/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2001-2010
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug
deleted file mode 100644
index c7c6116..0000000
--- a/board/icu862/u-boot.lds.debug
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/configs/ICU862_100MHz_defconfig b/configs/ICU862_100MHz_defconfig
deleted file mode 100644
index 72f0dfa..0000000
--- a/configs/ICU862_100MHz_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="100MHz"
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_ICU862=y
diff --git a/configs/ICU862_defconfig b/configs/ICU862_defconfig
deleted file mode 100644
index b58ea05..0000000
--- a/configs/ICU862_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_ICU862=y
diff --git a/include/commproc.h b/include/commproc.h
index 82a1a98..d481707 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -563,16 +563,6 @@ typedef struct scc_enet {
#endif /* CONFIG_HERMES */
-/*** ICU862 **********************************************************/
-
-#if defined(CONFIG_ICU862)
-
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-#endif /* CONFIG_ICU862 */
-
/*** IP860 **********************************************************/
#if defined(CONFIG_IP860)
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
deleted file mode 100644
index 16af4bb..0000000
--- a/include/configs/ICU862.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <mpc8xx_irq.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC860 1
-#define CONFIG_MPC860T 1
-#define CONFIG_ICU862 1
-#define CONFIG_MPC862 1
-
-#define CONFIG_SYS_TEXT_BASE 0x40F00000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#ifdef CONFIG_100MHz
-#define MPC8XX_FACT 24 /* Multiply by 24 */
-#define MPC8XX_XIN 4165000 /* 4.165 MHz in */
-#define CONFIG_8xx_GCLK_FREQ (MPC8XX_FACT * MPC8XX_XIN)
- /* define if cant' use get_gclk_freq */
-#else
-#if 1 /* for 50MHz version of processor */
-#define MPC8XX_FACT 12 /* Multiply by 12 */
-#define MPC8XX_XIN 4000000 /* 4 MHz in */
-#define CONFIG_8xx_GCLK_FREQ 48000000 /* define if cant use get_gclk_freq */
-#else /* for 80MHz version of processor */
-#define MPC8XX_FACT 20 /* Multiply by 20 */
-#define MPC8XX_XIN 4000000 /* 4 MHz in */
-#define CONFIG_8xx_GCLK_FREQ 80000000 /* define if cant use get_gclk_freq */
-#endif
-#endif
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
-#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
-#define CONFIG_MII 1
-#if 1
-#define CONFIG_SYS_DISCOVER_PHY 1
-#else
-#undef CONFIG_SYS_DISCOVER_PHY
-#endif
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_EEPROM_X40430 /* Use a Xicor X40430 EEPROM */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 bytes page write mode */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#define CONFIG_SYS_FLASH_SIZE ((uint)(16 * 1024 * 1024)) /* max 16Mbyte */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if 0
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#else
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00F40000
-
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Used Size of Environment Sector */
-#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#ifdef CONFIG_100MHz /* for 100 MHz, external bus is half CPU clock */
-#define SCCR_MASK 0
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
- SCCR_DFLCD000 |SCCR_DFALCD00 | SCCR_EBDF01)
-#else /* up to 50 MHz we use a 1:1 clock */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
- SCCR_DFLCD000 |SCCR_DFALCD00 )
-#endif /* CONFIG_100MHz */
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register 19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CONFIG_SYS_RCCR 0x0020
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * PCMCIA Power Switch
- *
- * The ICU862 uses a TPS2205 PC-Card Power-Interface Switch to
- * control the voltages on the PCMCIA slot which is connected to Port B
- *-----------------------------------------------------------------------
- */
- /* Output pins */
-#define TPS2205_VCC5 0x00008000 /* PB.16: 5V Voltage Control */
-#define TPS2205_VCC3 0x00004000 /* PB.17: 3V Voltage Control */
-#define TPS2205_VPP_PGM 0x00002000 /* PB.18: PGM Voltage Control */
-#define TPS2205_VPP_VCC 0x00001000 /* PB.19: VPP Voltage Control */
-#define TPS2205_SHDN 0x00000200 /* PB.22: Shutdown */
-#define TPS2205_OUTPUTS ( TPS2205_VCC5 | TPS2205_VCC3 | \
- TPS2205_VPP_PGM | TPS2205_VPP_VCC | \
- TPS2205_SHDN)
-
- /* Input pins */
-#define TPS2205_OC 0x00000100 /* PB.23: Over-Current */
-#define TPS2205_INPUTS ( TPS2205_OC )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently. Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register. For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x0 /* FLASH bank #1 */
-
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#define CONFIG_SYS_OR0_PRELIM 0xFF000954 /* Real values for the board */
-#define CONFIG_SYS_BR0_PRELIM 0x40000001 /* Real values for the board */
-
-/*
- * BR1 and OR1 (SDRAM)
- */
-#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000800 /* BIH is not set */
-
-#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_SYS_MAMR 0x13a01114
-
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
-
-#endif /* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 4b667f4..00065b2 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -29,8 +29,6 @@
# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_LWMON) /* The LWMON use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_ICU862) /* The ICU862 use SLOT_B */
-# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */
diff --git a/include/status_led.h b/include/status_led.h
index c1d2242..c5de894 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -114,25 +114,6 @@ void status_led_set (int led, int state);
# define STATUS_LED_GREEN 1
# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
-/***** ICU862 ********************************************************/
-#elif defined(CONFIG_ICU862)
-
-# define STATUS_LED_PAR im_ioport.iop_papar
-# define STATUS_LED_DIR im_ioport.iop_padir
-# define STATUS_LED_ODR im_ioport.iop_paodr
-# define STATUS_LED_DAT im_ioport.iop_padat
-
-# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */
-# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
/***** Someone else defines these *************************************/
#elif defined(STATUS_LED_PAR)
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 02/25] ppc: Zap MHPC board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 03/25] ppc: Zap Hymod board Marek Vasut
` (22 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This board uses eeprom accessors in an incorrect way. The board
is old and unsupported, just zap it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8xx/Kconfig | 4 -
arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 -
board/eltec/mhpc/Kconfig | 12 -
board/eltec/mhpc/MAINTAINERS | 6 -
board/eltec/mhpc/Makefile | 8 -
board/eltec/mhpc/flash.c | 414 ---------------------------------
board/eltec/mhpc/mhpc.c | 465 -------------------------------------
board/eltec/mhpc/u-boot.lds.debug | 121 ----------
configs/MHPC_defconfig | 3 -
include/commproc.h | 22 --
include/configs/MHPC.h | 369 -----------------------------
11 files changed, 1425 deletions(-)
delete mode 100644 board/eltec/mhpc/Kconfig
delete mode 100644 board/eltec/mhpc/MAINTAINERS
delete mode 100644 board/eltec/mhpc/Makefile
delete mode 100644 board/eltec/mhpc/flash.c
delete mode 100644 board/eltec/mhpc/mhpc.c
delete mode 100644 board/eltec/mhpc/u-boot.lds.debug
delete mode 100644 configs/MHPC_defconfig
delete mode 100644 include/configs/MHPC.h
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index 171bee9..4c150a8 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -40,9 +40,6 @@ config TARGET_RRVISION
config TARGET_SPD823TS
bool "Support SPD823TS"
-config TARGET_MHPC
- bool "Support MHPC"
-
config TARGET_TOP860
bool "Support TOP860"
@@ -117,7 +114,6 @@ endchoice
source "board/LEOX/elpt860/Kconfig"
source "board/RRvision/Kconfig"
source "board/cogent/Kconfig"
-source "board/eltec/mhpc/Kconfig"
source "board/emk/top860/Kconfig"
source "board/esteem192e/Kconfig"
source "board/hermes/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index b8dc14d..60c401e 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -130,7 +130,6 @@ void cpu_init_f (volatile immap_t * immr)
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
defined(CONFIG_LWMON) || \
- defined(CONFIG_MHPC) || \
defined(CONFIG_R360MPI) || \
defined(CONFIG_RMU) || \
defined(CONFIG_SPD823TS)
diff --git a/board/eltec/mhpc/Kconfig b/board/eltec/mhpc/Kconfig
deleted file mode 100644
index 5a4c884..0000000
--- a/board/eltec/mhpc/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MHPC
-
-config SYS_BOARD
- default "mhpc"
-
-config SYS_VENDOR
- default "eltec"
-
-config SYS_CONFIG_NAME
- default "MHPC"
-
-endif
diff --git a/board/eltec/mhpc/MAINTAINERS b/board/eltec/mhpc/MAINTAINERS
deleted file mode 100644
index 4d84a35..0000000
--- a/board/eltec/mhpc/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MHPC BOARD
-M: Frank Gottschling <fgottschling@eltec.de>
-S: Maintained
-F: board/eltec/mhpc/
-F: include/configs/MHPC.h
-F: configs/MHPC_defconfig
diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile
deleted file mode 100644
index f3fcc2f..0000000
--- a/board/eltec/mhpc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = mhpc.o flash.o
diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c
deleted file mode 100644
index ad89df9..0000000
--- a/board/eltec/mhpc/flash.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <linux/byteorder/swab.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
- size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000);
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F640J5 :
- printf ("28F640J5 \n"); break;
- default: printf ("Unknown Chip Type=0x%lXh\n",
- info->flash_id & FLASH_TYPEMASK); break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
- FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW)0xAA00AA00;
- addr[0x2AAA] = (FPW)0x55005500;
- addr[0x5555] = (FPW)0x90009000;
-
- value = SWAP(addr[0]);
-
- switch (value) {
- case (FPW)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW)0xFF00FF00; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- value = SWAP(addr[1]); /* device ID no swap !*/
-
- switch (value) {
- case (FPW)INTEL_ID_28F640J5 :
- info->flash_id += FLASH_28F640J5 ;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW)0xFF00FF00; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, now, last;
- int rc = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *)(info->start[sect]);
- FPW status;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = (FPW)0x50005000; /* clear status register */
- *addr = (FPW)0x20002000; /* erase setup */
- *addr = (FPW)0xD000D000; /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW)0xB000B000; /* suspend erase */
- *addr = (FPW)0xFF00FF00; /* reset to read mode */
- rc = 1;
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- *addr = (FPW)0xFF00FF00; /* reset to read mode */
- printf (" done\n");
- }
- }
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- for (; i<port_width && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_data(info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= port_width) {
- data = 0;
- for (i=0; i<port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data(info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if ((wp & 0xfff) == 0)
- {
- printf("%08lX",wp);
- printf("\x1b[8D");
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_data(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *)dest;
- ulong status;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf("not erased@%08lx (%x)\n",(ulong)addr,*addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = (FPW)0x40004000; /* write setup */
- *addr = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW)0xFF00FF00; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW)0xFF00FF00; /* restore read mode */
-
- return (0);
-}
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
deleted file mode 100644
index 5781b2a..0000000
--- a/board/eltec/mhpc/mhpc.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * (C) Copyright 2001
- * ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * Board specific routines for the miniHiPerCam
- *
- * - initialisation (eeprom)
- * - memory controller
- * - serial io initialisation
- * - ethernet io initialisation
- *
- * -----------------------------------------------------------------
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <cli.h>
-#include <linux/ctype.h>
-#include <commproc.h>
-#include "mpc8xx.h"
-#include <video_fb.h>
-
-extern void eeprom_init (void);
-extern int eeprom_read (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
-extern int eeprom_write (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
-
-/* globals */
-void *video_hw_init (void);
-void video_set_lut (unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- );
-
-GraphicDevice gdev;
-
-/* locals */
-static void video_circle (char *center, int radius, int color, int pitch);
-static void video_test_image (void);
-static void video_default_lut (unsigned int clut_type);
-
-/* revision info foer MHPC EEPROM offset 480 */
-typedef struct {
- char board[12]; /* 000 - Board Revision information */
- char sensor; /* 012 - Sensor Type information */
- char serial[8]; /* 013 - Board serial number */
- char etheraddr[6]; /* 021 - Ethernet node addresse */
- char revision[2]; /* 027 - Revision code */
- char option[3]; /* 029 - resevered for options */
-} revinfo;
-
-/* ------------------------------------------------------------------------- */
-
-static const unsigned int sdram_table[] = {
- /* read single beat cycle */
- 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
- 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
-
- /* read burst cycle */
- 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
- 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* write single beat cycle */
- 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* write burst cycle */
- 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
- 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* periodic timer expired */
- 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
- 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* exception */
- 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
-};
-
-/* ------------------------------------------------------------------------- */
-
-int board_early_init_f (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
-
- /* reset the port A s.a. cpm-routines */
- ip->iop_padat = 0x0000;
- ip->iop_papar = 0x0000;
- ip->iop_padir = 0x0800;
- ip->iop_paodr = 0x0000;
-
- /* reset the port B for digital and LCD output */
- cp->cp_pbdat = 0x0300;
- cp->cp_pbpar = 0x5001;
- cp->cp_pbdir = 0x5301;
- cp->cp_pbodr = 0x0000;
-
- /* reset the port C configured for SMC1 serial port and aqc. control */
- ip->iop_pcdat = 0x0800;
- ip->iop_pcpar = 0x0000;
- ip->iop_pcdir = 0x0e30;
- ip->iop_pcso = 0x0000;
-
- /* Config port D for LCD output */
- ip->iop_pdpar = 0x1fff;
- ip->iop_pddir = 0x1fff;
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity
- */
-int checkboard (void)
-{
- puts ("Board: ELTEC miniHiperCam\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
- revinfo mhpcRevInfo;
- char nid[32];
- char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
- "OMNIVISON OV7110 b&w", NULL
- };
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
- };
- int i;
-
- /* check revision data */
- eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
-
- if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
- printf ("Enter revision number (0-9): %c ",
- mhpcRevInfo.revision[0]);
- if (0 != cli_readline(NULL)) {
- mhpcRevInfo.revision[0] =
- (char) toupper (console_buffer[0]);
- }
-
- printf ("Enter revision character (A-Z): %c ",
- mhpcRevInfo.revision[1]);
- if (1 == cli_readline(NULL)) {
- mhpcRevInfo.revision[1] =
- (char) toupper (console_buffer[0]);
- }
-
- printf ("Enter board name (V-XXXX-XXXX): %s ",
- (char *) &mhpcRevInfo.board);
- if (11 == cli_readline(NULL)) {
- for (i = 0; i < 11; i++) {
- mhpcRevInfo.board[i] =
- (char) toupper (console_buffer[i]);
- mhpcRevInfo.board[11] = '\0';
- }
- }
-
- printf ("Supported sensor types:\n");
- i = 0;
- do {
- printf ("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]);
- } while (mhpcSensorTypes[++i] != NULL);
-
- do {
- printf ("\nEnter sensor number (0-255): %d ",
- (int) mhpcRevInfo.sensor);
- if (0 != cli_readline(NULL)) {
- mhpcRevInfo.sensor =
- (unsigned char)
- simple_strtoul (console_buffer, NULL,
- 10);
- }
- } while (mhpcRevInfo.sensor >= i);
-
- printf ("Enter serial number: %s ",
- (char *) &mhpcRevInfo.serial);
- if (6 == cli_readline(NULL)) {
- for (i = 0; i < 6; i++) {
- mhpcRevInfo.serial[i] = console_buffer[i];
- }
- mhpcRevInfo.serial[6] = '\0';
- }
-
- printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
- if (12 == cli_readline(NULL)) {
- for (i = 0; i < 12; i += 2) {
- mhpcRevInfo.etheraddr[i >> 1] =
- (char) (16 *
- hex[toupper
- (console_buffer[i]) -
- '0'] +
- hex[toupper
- (console_buffer[i + 1]) -
- '0']);
- }
- }
-
- /* setup new revision data */
- eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
- 32);
- }
-
- /* set environment */
- sprintf (nid, "%02x:%02x:%02x:%02x:%02x:%02x",
- mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
- mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
- mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
- setenv ("ethaddr", nid);
-
- /* print actual board identification */
- printf ("Ident: %s %s Ser %s Rev %c%c\n",
- mhpcRevInfo.board,
- (mhpcRevInfo.sensor == 0 ? "color" : "b&w"),
- (char *) &mhpcRevInfo.serial, mhpcRevInfo.revision[0],
- mhpcRevInfo.revision[1]);
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
- memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
- memctl->memc_mptpr = MPTPR_PTP_DIV64;
- memctl->memc_mar = 0x00008800;
-
- /*
- * Map controller SDRAM bank 0
- */
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- udelay (200);
-
- /*
- * Map controller SDRAM bank 1
- */
- memctl->memc_or2 = CONFIG_SYS_OR2;
- memctl->memc_br2 = CONFIG_SYS_BR2;
-
- /*
- * Perform SDRAM initializsation sequence
- */
- memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */
- udelay (1);
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (10000);
-
- /* leave place for framebuffers */
- return (SDRAM_MAX_SIZE - SDRAM_RES_SIZE);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void video_circle (char *center, int radius, int color, int pitch)
-{
- int x, y, d, dE, dSE;
-
- x = 0;
- y = radius;
- d = 1 - radius;
- dE = 3;
- dSE = -2 * radius + 5;
-
- *(center + x + y * pitch) = color;
- *(center + y + x * pitch) = color;
- *(center + y - x * pitch) = color;
- *(center + x - y * pitch) = color;
- *(center - x - y * pitch) = color;
- *(center - y - x * pitch) = color;
- *(center - y + x * pitch) = color;
- *(center - x + y * pitch) = color;
- while (y > x) {
- if (d < 0) {
- d += dE;
- dE += 2;
- dSE += 2;
- x++;
- } else {
- d += dSE;
- dE += 2;
- dSE += 4;
- x++;
- y--;
- }
- *(center + x + y * pitch) = color;
- *(center + y + x * pitch) = color;
- *(center + y - x * pitch) = color;
- *(center + x - y * pitch) = color;
- *(center - x - y * pitch) = color;
- *(center - y - x * pitch) = color;
- *(center - y + x * pitch) = color;
- *(center - x + y * pitch) = color;
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void video_test_image (void)
-{
- char *di;
- int i, n;
-
- /* draw raster */
- for (i = 0; i < LCD_VIDEO_ROWS; i += 32) {
- memset ((char *) (LCD_VIDEO_ADDR + i * LCD_VIDEO_COLS),
- LCD_VIDEO_FG, LCD_VIDEO_COLS);
- for (n = i + 1; n < i + 32; n++)
- memset ((char *) (LCD_VIDEO_ADDR +
- n * LCD_VIDEO_COLS), LCD_VIDEO_BG,
- LCD_VIDEO_COLS);
- }
-
- for (i = 0; i < LCD_VIDEO_COLS; i += 32) {
- for (n = 0; n < LCD_VIDEO_ROWS; n++)
- *(char *) (LCD_VIDEO_ADDR + n * LCD_VIDEO_COLS + i) =
- LCD_VIDEO_FG;
- }
-
- /* draw gray bar */
- di = (char *) (LCD_VIDEO_ADDR + (LCD_VIDEO_COLS - 256) / 64 * 32 +
- 97 * LCD_VIDEO_COLS);
- for (n = 0; n < 63; n++) {
- for (i = 0; i < 256; i++) {
- *di++ = (char) i;
- *(di + LCD_VIDEO_COLS * 64) = (i & 1) * 255;
- }
- di += LCD_VIDEO_COLS - 256;
- }
-
- video_circle ((char *) LCD_VIDEO_ADDR + LCD_VIDEO_COLS / 2 +
- LCD_VIDEO_ROWS / 2 * LCD_VIDEO_COLS, LCD_VIDEO_ROWS / 2,
- LCD_VIDEO_FG, LCD_VIDEO_COLS);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void video_default_lut (unsigned int clut_type)
-{
- unsigned int i;
- unsigned char RGB[] = {
- 0x00, 0x00, 0x00, /* black */
- 0x80, 0x80, 0x80, /* gray */
- 0xff, 0x00, 0x00, /* red */
- 0x00, 0xff, 0x00, /* green */
- 0x00, 0x00, 0xff, /* blue */
- 0x00, 0xff, 0xff, /* cyan */
- 0xff, 0x00, 0xff, /* magenta */
- 0xff, 0xff, 0x00, /* yellow */
- 0x80, 0x00, 0x00, /* dark red */
- 0x00, 0x80, 0x00, /* dark green */
- 0x00, 0x00, 0x80, /* dark blue */
- 0x00, 0x80, 0x80, /* dark cyan */
- 0x80, 0x00, 0x80, /* dark magenta */
- 0x80, 0x80, 0x00, /* dark yellow */
- 0xc0, 0xc0, 0xc0, /* light gray */
- 0xff, 0xff, 0xff, /* white */
- };
-
- switch (clut_type) {
- case 1:
- for (i = 0; i < 240; i++)
- video_set_lut (i, i, i, i);
- for (i = 0; i < 16; i++)
- video_set_lut (i + 240, RGB[i * 3], RGB[i * 3 + 1],
- RGB[i * 3 + 2]);
- break;
- default:
- for (i = 0; i < 256; i++)
- video_set_lut (i, i, i, i);
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-void *video_hw_init (void)
-{
- unsigned int clut = 0;
- unsigned char *penv;
- immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /* enable video only on CLUT value */
- if ((penv = (uchar *)getenv ("clut")) != NULL)
- clut = (u_int) simple_strtoul ((char *)penv, NULL, 10);
- else
- return NULL;
-
- /* disable graphic before write LCD regs. */
- immr->im_lcd.lcd_lccr = 0x96000866;
-
- /* config LCD regs. */
- immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
- immr->im_lcd.lcd_lchcr = 0x010a0093;
- immr->im_lcd.lcd_lcvcr = 0x900f0024;
-
- printf ("Video: 640x480 8Bit Index Lut %s\n",
- (clut == 1 ? "240/16 (gray/vga)" : "256(gray)"));
-
- video_default_lut (clut);
-
- /* clear framebuffer */
- memset ((char *) (LCD_VIDEO_ADDR), LCD_VIDEO_BG,
- LCD_VIDEO_ROWS * LCD_VIDEO_COLS);
-
- /* enable graphic */
- immr->im_lcd.lcd_lccr = 0x96000867;
-
- /* fill in Graphic Device */
- gdev.frameAdrs = LCD_VIDEO_ADDR;
- gdev.winSizeX = LCD_VIDEO_COLS;
- gdev.winSizeY = LCD_VIDEO_ROWS;
- gdev.gdfBytesPP = 1;
- gdev.gdfIndex = GDF__8BIT_INDEX;
-
- if (clut > 1)
- /* return Graphic Device for console */
- return (void *) &gdev;
- else
- /* just graphic enabled - draw something beautiful */
- video_test_image ();
-
- return NULL; /* this disabels cfb - console */
-}
-
-/* ------------------------------------------------------------------------- */
-
-void video_set_lut (unsigned int index,
- unsigned char r, unsigned char g, unsigned char b)
-{
- unsigned int lum;
- unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00);
-
- /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
- /* y = 0.299*R + 0.587*G + 0.114*B */
- lum = (2990 * r + 5870 * g + 1140 * b) / 10000;
- pLut[index] =
- ((b & 0xc0) << 4) | ((g & 0xc0) << 2) | (r & 0xc0) | (lum &
- 0x3f);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug
deleted file mode 100644
index b0091db..0000000
--- a/board/eltec/mhpc/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/configs/MHPC_defconfig b/configs/MHPC_defconfig
deleted file mode 100644
index b05d3c4..0000000
--- a/configs/MHPC_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_MHPC=y
diff --git a/include/commproc.h b/include/commproc.h
index d481707..d78ab00 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -703,28 +703,6 @@ typedef struct scc_enet {
#define SICR_ENET_CLKRT ((uint)0x00250000)
#endif /* CONFIG_KM8XX */
-
-/*** MHPC ********************************************************/
-
-#if defined(CONFIG_MHPC)
-/* This ENET stuff is for the MHPC with ethernet on SCC2.
- * Note TENA is on Port B.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002e00) /* RCLK-CLK2, TCLK-CLK3 */
-#endif /* CONFIG_MHPC */
-
/*** NETVIA *******************************************************/
#if defined(CONFIG_NETVIA)
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
deleted file mode 100644
index d45be0f..0000000
--- a/include/configs/MHPC.h
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2001
- * Frank Gottschling, ELTEC Elektronik AG, fgottschling at eltec.de
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Configuation settings for the miniHiPerCam.
- *
- * -----------------------------------------------------------------
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_MHPC 1 /* on a miniHiPerCam */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* do special hardware init. */
-#define CONFIG_MISC_INIT_R 1
-
-#define CONFIG_SYS_TEXT_BASE 0xfe000000
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_SPEED
-#undef CONFIG_8xx_CONS_SMC1
-#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#undef CONFIG_UCODE_PATCH
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C04 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define LCD_VIDEO_ADDR (SDRAM_MAX_SIZE-SDRAM_RES_SIZE)
-#define LCD_VIDEO_SIZE SDRAM_RES_SIZE /* 2MB */
-#define LCD_VIDEO_COLS 640
-#define LCD_VIDEO_ROWS 480
-#define LCD_VIDEO_FG 255
-#define LCD_VIDEO_BG 0
-
-#undef CONFIG_VIDEO /* test only ! s.a devices.c and 8xx */
-#define CONFIG_CFB_CONSOLE /* framebuffer console with std input */
-#define CONFIG_VIDEO_LOGO
-
-#define VIDEO_KBD_INIT_FCT 0 /* no KBD dev on MHPC - use serial */
-#define VIDEO_TSTC_FCT serial_stub_tstc
-#define VIDEO_GETC_FCT serial_stub_getc
-
-#define CONFIG_BR0_WORKAROUND 1
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_REGINFO
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Physical memory map
- */
-#define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register*/
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xfe000000
-
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
-#undef CONFIG_SYS_MONITOR_BASE /* to run U-Boot from RAM */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=mhpc-0"
-#define MTDPARTS_DEFAULT "mtdparts=mhpc-0:-(jffs2)"
-*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map- for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN /* Offset of Environment */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_SEME)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 12-18
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit - leave PLL multiplication factor unchanged !
- */
-#define MPC8XX_SPEED 50000000L
-#define MPC8XX_XIN 5000000L /* ref clk */
-#define MPC8XX_FACT (MPC8XX_SPEED/MPC8XX_XIN)
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-
-#define SCCR_MASK (SCCR_RTDIV | SCCR_RTSEL) /* SCCR_EBDF11 */
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_DFLCD001)
-
-
-/*-----------------------------------------------------------------------
- * MAMR settings for SDRAM - 16-14
- * => 0xC080200F
- *-----------------------------------------------------------------------
- * periodic timer for refresh
- */
-#define CONFIG_SYS_MAMR_PTA 0xC0
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_G0CLA_A11 | MAMR_TLFA_MSK)
-
-/*
- * BR0 and OR0 (FLASH) used to re-map FLASH
- */
-
-/* allow for max 8 MB of Flash */
-#define FLASH_BASE 0xFE000000 /* FLASH bank #0*/
-#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0*/
-#define CONFIG_SYS_REMAP_OR_AM 0xFF800000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
-
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK) /* (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK)*/
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V )
-
-/*
- * BR1 and OR1 (SDRAM)
- */
-#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x01000000 /* max 16 MB */
-#define SDRAM_RES_SIZE 0x00200000 /* 2 MB for framebuffer */
-
-/* SDRAM timing: drive GPL5 high on first cycle */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_G5LS)
-
-#define CONFIG_SYS_OR1_PRELIM ((~(SDRAM_MAX_SIZE)+1)| CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * BR2/OR2 - DIMM
- */
-#define CONFIG_SYS_OR2 (OR_ACS_DIV4)
-#define CONFIG_SYS_BR2 (BR_MS_UPMA)
-
-/*
- * BR3/OR3 - DIMM
- */
-#define CONFIG_SYS_OR3 (OR_ACS_DIV4)
-#define CONFIG_SYS_BR3 (BR_MS_UPMA)
-
-/*
- * BR4/OR4
- */
-#define CONFIG_SYS_OR4 0
-#define CONFIG_SYS_BR4 0
-
-/*
- * BR5/OR5
- */
-#define CONFIG_SYS_OR5 0
-#define CONFIG_SYS_BR5 0
-
-/*
- * BR6/OR6
- */
-#define CONFIG_SYS_OR6 0
-#define CONFIG_SYS_BR6 0
-
-/*
- * BR7/OR7
- */
-#define CONFIG_SYS_OR7 0
-#define CONFIG_SYS_BR7 0
-
-
-/*-----------------------------------------------------------------------
- * Debug Entry Mode
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-#endif /* __CONFIG_H */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 03/25] ppc: Zap Hymod board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 02/25] ppc: Zap MHPC board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 04/25] ppc: Zap HWW1U1A board Marek Vasut
` (21 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.
This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +-
arch/powerpc/cpu/mpc8260/interrupts.c | 10 +-
arch/powerpc/cpu/mpc8260/start.S | 14 -
arch/powerpc/cpu/mpc83xx/start.S | 11 -
arch/powerpc/include/asm/u-boot.h | 3 -
board/hymod/Kconfig | 9 -
board/hymod/MAINTAINERS | 6 -
board/hymod/Makefile | 8 -
board/hymod/bsp.c | 387 ------------------
board/hymod/config.mk | 14 -
board/hymod/eeprom.c | 678 -------------------------------
board/hymod/env.c | 221 -----------
board/hymod/fetch.c | 91 -----
board/hymod/flash.c | 490 -----------------------
board/hymod/flash.h | 140 -------
board/hymod/global_env | 145 -------
board/hymod/hymod.c | 521 ------------------------
board/hymod/hymod.h | 305 --------------
board/hymod/input.c | 91 -----
board/hymod/u-boot.lds | 132 ------
board/hymod/u-boot.lds.debug | 121 ------
configs/hymod_defconfig | 3 -
include/asm-generic/u-boot.h | 3 -
include/common.h | 3 -
include/configs/hymod.h | 728 ----------------------------------
tools/bddb/README | 116 ------
tools/bddb/badsubmit.php | 23 --
tools/bddb/bddb.css | 207 ----------
tools/bddb/brlog.php | 109 -----
tools/bddb/browse.php | 147 -------
tools/bddb/config.php | 16 -
tools/bddb/create_tables.sql | 90 -----
tools/bddb/defs.php | 710 ---------------------------------
tools/bddb/dodelete.php | 65 ---
tools/bddb/dodellog.php | 57 ---
tools/bddb/doedit.php | 186 ---------
tools/bddb/doedlog.php | 76 ----
tools/bddb/donew.php | 230 -----------
tools/bddb/donewlog.php | 86 ----
tools/bddb/edit.php | 131 ------
tools/bddb/edlog.php | 86 ----
tools/bddb/execute.php | 33 --
tools/bddb/index.php | 38 --
tools/bddb/new.php | 120 ------
tools/bddb/newlog.php | 54 ---
46 files changed, 2 insertions(+), 6743 deletions(-)
delete mode 100644 board/hymod/Kconfig
delete mode 100644 board/hymod/MAINTAINERS
delete mode 100644 board/hymod/Makefile
delete mode 100644 board/hymod/bsp.c
delete mode 100644 board/hymod/config.mk
delete mode 100644 board/hymod/eeprom.c
delete mode 100644 board/hymod/env.c
delete mode 100644 board/hymod/fetch.c
delete mode 100644 board/hymod/flash.c
delete mode 100644 board/hymod/flash.h
delete mode 100644 board/hymod/global_env
delete mode 100644 board/hymod/hymod.c
delete mode 100644 board/hymod/hymod.h
delete mode 100644 board/hymod/input.c
delete mode 100644 board/hymod/u-boot.lds
delete mode 100644 board/hymod/u-boot.lds.debug
delete mode 100644 configs/hymod_defconfig
delete mode 100644 include/configs/hymod.h
delete mode 100644 tools/bddb/README
delete mode 100644 tools/bddb/badsubmit.php
delete mode 100644 tools/bddb/bddb.css
delete mode 100644 tools/bddb/brlog.php
delete mode 100644 tools/bddb/browse.php
delete mode 100644 tools/bddb/config.php
delete mode 100644 tools/bddb/create_tables.sql
delete mode 100644 tools/bddb/defs.php
delete mode 100644 tools/bddb/dodelete.php
delete mode 100644 tools/bddb/dodellog.php
delete mode 100644 tools/bddb/doedit.php
delete mode 100644 tools/bddb/doedlog.php
delete mode 100644 tools/bddb/donew.php
delete mode 100644 tools/bddb/donewlog.php
delete mode 100644 tools/bddb/edit.php
delete mode 100644 tools/bddb/edlog.php
delete mode 100644 tools/bddb/execute.php
delete mode 100644 tools/bddb/index.php
delete mode 100644 tools/bddb/new.php
delete mode 100644 tools/bddb/newlog.php
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 41e4e5f..7f246ff 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -28,9 +28,6 @@ config TARGET_EP82XXM
config TARGET_GW8260
bool "Support gw8260"
-config TARGET_HYMOD
- bool "Support hymod"
-
config TARGET_IPHASE4539
bool "Support IPHASE4539"
@@ -78,7 +75,6 @@ source "board/ep82xxm/Kconfig"
source "board/freescale/mpc8266ads/Kconfig"
source "board/funkwerk/vovpn-gw/Kconfig"
source "board/gw8260/Kconfig"
-source "board/hymod/Kconfig"
source "board/ids/ids8247/Kconfig"
source "board/iphase4539/Kconfig"
source "board/keymile/km82xx/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c
index d93a991..f9f15b5 100644
--- a/arch/powerpc/cpu/mpc8260/ether_fcc.c
+++ b/arch/powerpc/cpu/mpc8260/ether_fcc.c
@@ -645,32 +645,7 @@ eth_loopback_test (void)
/* 28.9 - (1-2): ioports have been set up already */
-#if defined(CONFIG_HYMOD)
- /*
- * Attention: this is board-specific
- * 0, FCC1
- * 1, FCC2
- * 2, FCC3
- */
-# define FCC_START_LOOP 0
-# define FCC_END_LOOP 2
-
- /*
- * Attention: this is board-specific
- * - FCC1 Rx-CLK is CLK10
- * - FCC1 Tx-CLK is CLK11
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- * - FCC3 Rx-CLK is CLK15
- * - FCC3 Tx-CLK is CLK16
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
- CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
- CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SACSng)
+#if defined(CONFIG_SACSng)
/*
* Attention: this is board-specific
* 1, FCC2
diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c
index 30125a7..41d2c04 100644
--- a/arch/powerpc/cpu/mpc8260/interrupts.c
+++ b/arch/powerpc/cpu/mpc8260/interrupts.c
@@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
immr->im_intctl.ic_sipnrh = 0xffffffff;
immr->im_intctl.ic_sipnrl = 0xffffffff;
-#ifdef CONFIG_HYMOD
- /*
- * ensure all external interrupt sources default to trigger on
- * high-to-low transition (i.e. edge triggered active low)
- */
- immr->im_intctl.ic_siexr = -1;
-#endif
-
- return (0);
+ return 0;
}
/****************************************************************************/
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index d7eaf13..5f1e174 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -48,9 +48,6 @@
GOT_ENTRY(__init_end)
GOT_ENTRY(__bss_end)
GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
- GOT_ENTRY(environment)
-#endif
END_GOT
/*
@@ -878,18 +875,7 @@ clear_bss:
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
lwz r4,GOT(__bss_end)
-#endif
cmplw 0, r3, r4
beq 6f
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index 36724e5..af75c63 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -958,18 +958,7 @@ clear_bss:
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
lwz r4,GOT(__bss_end)
-#endif
cmplw 0, r3, r4
beq 6f
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index e1b566f..a61e998 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -77,9 +77,6 @@ typedef struct bd_info {
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
#ifdef CONFIG_HAS_ETH1
unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
diff --git a/board/hymod/Kconfig b/board/hymod/Kconfig
deleted file mode 100644
index fa162eb..0000000
--- a/board/hymod/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_HYMOD
-
-config SYS_BOARD
- default "hymod"
-
-config SYS_CONFIG_NAME
- default "hymod"
-
-endif
diff --git a/board/hymod/MAINTAINERS b/board/hymod/MAINTAINERS
deleted file mode 100644
index e27fe97..0000000
--- a/board/hymod/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HYMOD BOARD
-M: Murray Jensen <Murray.Jensen@csiro.au>
-S: Maintained
-F: board/hymod/
-F: include/configs/hymod.h
-F: configs/hymod_defconfig
diff --git a/board/hymod/Makefile b/board/hymod/Makefile
deleted file mode 100644
index b9080b0..0000000
--- a/board/hymod/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = hymod.o flash.o bsp.o eeprom.o fetch.o input.o env.o
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
deleted file mode 100644
index e54640f..0000000
--- a/board/hymod/bsp.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * hacked for Hymod FPGA support by Murray.Jensen at csiro.au, 29-Jan-01
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <asm/iopin_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*-----------------------------------------------------------------------
- * Board Special Commands: FPGA load/store, EEPROM erase
- */
-
-#if defined(CONFIG_CMD_BSP)
-
-#define LOAD_SUCCESS 0
-#define LOAD_FAIL_NOCONF 1
-#define LOAD_FAIL_NOINIT 2
-#define LOAD_FAIL_NODONE 3
-
-#define STORE_SUCCESS 0
-
-/*
- * Programming the Hymod FPGAs
- *
- * The 8260 io port config table is set up so that the INIT pin is
- * held Low (Open Drain output 0) - this will delay the automatic
- * Power-On config until INIT is released (by making it an input).
- *
- * If the FPGA has been programmed before, then the assertion of PROGRAM
- * will initiate configuration (i.e. it begins clearing the RAM).
- *
- * When the FPGA is ready to receive configuration data (either after
- * releasing INIT after Power-On, or after asserting PROGRAM), it will
- * pull INIT high.
- *
- * Notes from Paul Dunn:
- *
- * 1. program pin should be forced low for >= 300ns
- * (about 20 bus clock cycles minimum).
- *
- * 2. then wait for init to go high, which signals
- * that the FPGA has cleared its internal memory
- * and is ready to load
- *
- * 3. perform load writes of entire config file
- *
- * 4. wait for done to go high, which should be
- * within a few bus clock cycles. If done has not
- * gone high after reasonable period, then load
- * has not worked (wait several ms?)
- */
-
-int
-fpga_load(int mezz, const uchar *addr, ulong size)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- xlx_info_t *fp;
- xlx_iopins_t *fpgaio;
- volatile uchar *fpgabase;
- volatile uint cnt;
- const uchar *eaddr = addr + size;
- int result;
-
- if (mezz)
- fp = &cp->mezz.xlx[0];
- else
- fp = &cp->main.xlx[0];
-
- if (!fp->mmap.prog.exists)
- return (LOAD_FAIL_NOCONF);
-
- fpgabase = (uchar *)fp->mmap.prog.base;
- fpgaio = &fp->iopins;
-
- /* set enable HIGH if required */
- if (fpgaio->enable_pin.flag)
- iopin_set_high (&fpgaio->enable_pin);
-
- /* ensure INIT is released (set it to be an input) */
- iopin_set_in (&fpgaio->init_pin);
-
- /* toggle PROG Low then High (will already be Low after Power-On) */
- iopin_set_low (&fpgaio->prog_pin);
- udelay (1); /* minimum 300ns - 1usec should do it */
- iopin_set_high (&fpgaio->prog_pin);
-
- /* wait for INIT High */
- cnt = 0;
- while (!iopin_is_high (&fpgaio->init_pin))
- if (++cnt == 10000000) {
- result = LOAD_FAIL_NOINIT;
- goto done;
- }
-
- /* write configuration data */
- while (addr < eaddr)
- *fpgabase = *addr++;
-
- /* wait for DONE High */
- cnt = 0;
- while (!iopin_is_high (&fpgaio->done_pin))
- if (++cnt == 100000000) {
- result = LOAD_FAIL_NODONE;
- goto done;
- }
-
- /* success */
- result = LOAD_SUCCESS;
-
- done:
-
- if (fpgaio->enable_pin.flag)
- iopin_set_low (&fpgaio->enable_pin);
-
- return (result);
-}
-
-/* ------------------------------------------------------------------------- */
-int
-do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- uchar *addr, *save_addr;
- ulong size;
- int mezz, arg, result;
-
- switch (argc) {
-
- case 0:
- case 1:
- break;
-
- case 2:
- if (strcmp (argv[1], "info") == 0) {
- printf ("\nHymod FPGA Info...\n");
- printf ("\t\t\t\tAddress\t\tSize\n");
- printf ("\tMain Configuration:\t0x%08x\t%d\n",
- FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
- printf ("\tMain Register:\t\t0x%08x\t%d\n",
- FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
- printf ("\tMain Port:\t\t0x%08x\t%d\n",
- FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
- printf ("\tMezz Configuration:\t0x%08x\t%d\n",
- FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
- return 0;
- }
- break;
-
- case 3:
- if (strcmp (argv[1], "store") == 0) {
- addr = (uchar *) simple_strtoul (argv[2], NULL, 16);
-
- save_addr = addr;
-#if 0
- /* fpga readback unimplemented */
- while (more readback data)
- *addr++ = *fpga;
- result = error ? STORE_FAIL_XXX : STORE_SUCCESS;
-#else
- result = STORE_SUCCESS;
-#endif
-
- if (result == STORE_SUCCESS) {
- printf ("SUCCEEDED (%d bytes)\n",
- addr - save_addr);
- return 0;
- } else
- printf ("FAILED (%d bytes)\n",
- addr - save_addr);
- return 1;
- }
- break;
-
- case 4:
- if (strcmp (argv[1], "tftp") == 0) {
- copy_filename (BootFile, argv[2], sizeof (BootFile));
- load_addr = simple_strtoul (argv[3], NULL, 16);
- NetBootFileXferSize = 0;
-
- if (NetLoop(TFTPGET) <= 0) {
- printf ("tftp transfer failed - aborting "
- "fgpa load\n");
- return 1;
- }
-
- if (NetBootFileXferSize == 0) {
- printf ("can't determine file size - "
- "aborting fpga load\n");
- return 1;
- }
-
- printf ("File transfer succeeded - "
- "beginning fpga load...");
-
- result = fpga_load (0, (uchar *) load_addr,
- NetBootFileXferSize);
-
- if (result == LOAD_SUCCESS) {
- printf ("SUCCEEDED\n");
- return 0;
- } else if (result == LOAD_FAIL_NOCONF)
- printf ("FAILED (no CONF)\n");
- else if (result == LOAD_FAIL_NOINIT)
- printf ("FAILED (no INIT)\n");
- else
- printf ("FAILED (no DONE)\n");
- return 1;
-
- }
- /* fall through ... */
-
- case 5:
- if (strcmp (argv[1], "load") == 0) {
- if (argc == 5) {
- if (strcmp (argv[2], "main") == 0)
- mezz = 0;
- else if (strcmp (argv[2], "mezz") == 0)
- mezz = 1;
- else {
- printf ("FPGA type must be either "
- "`main' or `mezz'\n");
- return 1;
- }
- arg = 3;
- } else {
- mezz = 0;
- arg = 2;
- }
-
- addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16);
- size = (ulong) simple_strtoul (argv[arg], NULL, 16);
-
- result = fpga_load (mezz, addr, size);
-
- if (result == LOAD_SUCCESS) {
- printf ("SUCCEEDED\n");
- return 0;
- } else if (result == LOAD_FAIL_NOCONF)
- printf ("FAILED (no CONF)\n");
- else if (result == LOAD_FAIL_NOINIT)
- printf ("FAILED (no INIT)\n");
- else
- printf ("FAILED (no DONE)\n");
- return 1;
- }
- break;
-
- default:
- break;
- }
-
- return cmd_usage(cmdtp);
-}
-U_BOOT_CMD(
- fpga, 6, 1, do_fpga,
- "FPGA sub-system",
- "load [type] addr size\n"
- " - write the configuration data at memory address `addr',\n"
- " size `size' bytes, into the FPGA of type `type' (either\n"
- " `main' or `mezz', default `main'). e.g.\n"
- " `fpga load 100000 7d8f'\n"
- " loads the main FPGA with config data at address 100000\n"
- " HEX, size 7d8f HEX (32143 DEC) bytes\n"
- "fpga tftp file addr\n"
- " - transfers `file' from the tftp server into memory at\n"
- " address `addr', then writes the entire file contents\n"
- " into the main FPGA\n"
- "fpga store addr\n"
- " - read configuration data from the main FPGA (the mezz\n"
- " FPGA is write-only), into address `addr'. There must be\n"
- " enough memory available at `addr' to hold all the config\n"
- " data - the size of which is determined by VC:???\n"
- "fpga info\n"
- " - print information about the Hymod FPGA, namely the\n"
- " memory addresses@which the four FPGA local bus\n"
- " address spaces appear in the physical address space"
-);
-/* ------------------------------------------------------------------------- */
-int
-do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- uchar data[HYMOD_EEPROM_SIZE];
- uint addr = CONFIG_SYS_I2C_EEPROM_ADDR;
-
- switch (argc) {
-
- case 1:
- addr |= HYMOD_EEOFF_MAIN;
- break;
-
- case 2:
- if (strcmp (argv[1], "main") == 0) {
- addr |= HYMOD_EEOFF_MAIN;
- break;
- }
- if (strcmp (argv[1], "mezz") == 0) {
- addr |= HYMOD_EEOFF_MEZZ;
- break;
- }
- /* fall through ... */
-
- default:
- return cmd_usage(cmdtp);
- }
-
- memset (data, 0, HYMOD_EEPROM_SIZE);
-
- eeprom_write (addr, 0, data, HYMOD_EEPROM_SIZE);
-
- return 0;
-}
-U_BOOT_CMD(
- eeclear, 1, 0, do_eecl,
- "Clear the eeprom on a Hymod board",
- "[type]\n"
- " - write zeroes into the EEPROM on the board of type `type'\n"
- " (`type' is either `main' or `mezz' - default `main')\n"
- " Note: the EEPROM write enable jumper must be installed"
-);
-
-/* ------------------------------------------------------------------------- */
-
-int
-do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-#if 0
- int rc;
-#endif
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
- extern void eth_loopback_test (void);
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
- printf ("HYMOD tests - ensure loopbacks etc. are connected\n\n");
-
-#if 0
- /* Load FPGA with test program */
-
- printf ("Loading test FPGA program ...");
-
- rc = fpga_load (0, test_bitfile, sizeof (test_bitfile));
-
- switch (rc) {
-
- case LOAD_SUCCESS:
- printf (" SUCCEEDED\n");
- break;
-
- case LOAD_FAIL_NOCONF:
- printf (" FAILED (no configuration space defined)\n");
- return 1;
-
- case LOAD_FAIL_NOINIT:
- printf (" FAILED (timeout - no INIT signal seen)\n");
- return 1;
-
- case LOAD_FAIL_NODONE:
- printf (" FAILED (timeout - no DONE signal seen)\n");
- return 1;
-
- default:
- printf (" FAILED (unknown return code from fpga_load\n");
- return 1;
- }
-
- /* run Local Bus <=> Xilinx tests */
-
- /* tell Xilinx to run ZBT Ram, High Speed serial and Mezzanine tests */
-
- /* run SDRAM test */
-#endif
-
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
- /* run Ethernet test */
- eth_loopback_test ();
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
- return 0;
-}
-
-#endif
diff --git a/board/hymod/config.mk b/board/hymod/config.mk
deleted file mode 100644
index 2eeea50..0000000
--- a/board/hymod/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#
-# HYMOD boards
-#
-
-PLATFORM_CPPFLAGS += -I$(srctree)
-
-OBJCOPYFLAGS = --remove-section=.ppcenv
diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c
deleted file mode 100644
index ffb0df1..0000000
--- a/board/hymod/eeprom.c
+++ /dev/null
@@ -1,678 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-
-/* imports from fetch.c */
-extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
-
-/* imports from input.c */
-extern int hymod_get_serno (const char *);
-
-/* this is relative to the root of the server's tftp directory */
-static char *def_bddb_cfgdir = "/hymod/bddb";
-
-static int
-hymod_eeprom_load (int which, hymod_eeprom_t *ep)
-{
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- unsigned offset = 0;
- uchar data[HYMOD_EEPROM_MAXLEN], *dp, *edp;
- hymod_eehdr_t hdr;
- ulong len, crc;
-
- memset (ep, 0, sizeof *ep);
-
- eeprom_read (dev_addr, offset, (uchar *)&hdr, sizeof (hdr));
- offset += sizeof (hdr);
-
- if (hdr.id != HYMOD_EEPROM_ID || hdr.ver > HYMOD_EEPROM_VER ||
- (len = hdr.len) > HYMOD_EEPROM_MAXLEN)
- return (0);
-
- eeprom_read (dev_addr, offset, data, len);
- offset += len;
-
- eeprom_read (dev_addr, offset, (uchar *)&crc, sizeof (ulong));
- offset += sizeof (ulong);
-
- if (crc32 (crc32 (0, (uchar *)&hdr, sizeof hdr), data, len) != crc)
- return (0);
-
- ep->ver = hdr.ver;
- dp = data; edp = dp + len;
-
- for (;;) {
- ulong rtyp;
- uchar rlen, *rdat;
-
- rtyp = *dp++;
- if ((rtyp & 0x80) == 0)
- rlen = *dp++;
- else {
- uchar islarge = rtyp & 0x40;
-
- rtyp = ((rtyp & 0x3f) << 8) | *dp++;
- if (islarge) {
- rtyp = (rtyp << 8) | *dp++;
- rtyp = (rtyp << 8) | *dp++;
- }
-
- rlen = *dp++;
- rlen = (rlen << 8) | *dp++;
- if (islarge) {
- rlen = (rlen << 8) | *dp++;
- rlen = (rlen << 8) | *dp++;
- }
- }
-
- if (rtyp == 0)
- break;
-
- rdat = dp;
- dp += rlen;
-
- if (dp > edp) /* error? */
- break;
-
- switch (rtyp) {
-
- case HYMOD_EEREC_SERNO: /* serial number */
- if (rlen == sizeof (ulong))
- ep->serno = \
- ((ulong)rdat[0] << 24) | \
- ((ulong)rdat[1] << 16) | \
- ((ulong)rdat[2] << 8) | \
- (ulong)rdat[3];
- break;
-
- case HYMOD_EEREC_DATE: /* date */
- if (rlen == sizeof (hymod_date_t)) {
- ep->date.year = ((ushort)rdat[0] << 8) | \
- (ushort)rdat[1];
- ep->date.month = rdat[2];
- ep->date.day = rdat[3];
- }
- break;
-
- case HYMOD_EEREC_BATCH: /* batch */
- if (rlen <= HYMOD_MAX_BATCH)
- memcpy (ep->batch, rdat, ep->batchlen = rlen);
- break;
-
- case HYMOD_EEREC_TYPE: /* board type */
- if (rlen == 1)
- ep->bdtype = *rdat;
- break;
-
- case HYMOD_EEREC_REV: /* board revision */
- if (rlen == 1)
- ep->bdrev = *rdat;
- break;
-
- case HYMOD_EEREC_SDRAM: /* sdram size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->sdramsz[i] = rdat[i];
- ep->nsdram = rlen;
- }
- break;
-
- case HYMOD_EEREC_FLASH: /* flash size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->flashsz[i] = rdat[i];
- ep->nflash = rlen;
- }
- break;
-
- case HYMOD_EEREC_ZBT: /* zbt ram size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->zbtsz[i] = rdat[i];
- ep->nzbt = rlen;
- }
- break;
-
- case HYMOD_EEREC_XLXTYP: /* xilinx fpga type(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].type = rdat[i];
- ep->nxlx = rlen;
- }
- break;
-
- case HYMOD_EEREC_XLXSPD: /* xilinx fpga speed(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].speed = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_XLXTMP: /* xilinx fpga temperature(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].temp = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_XLXGRD: /* xilinx fpga grade(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].grade = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_CPUTYP: /* CPU type */
- if (rlen == 1)
- ep->mpc.type = *rdat;
- break;
-
- case HYMOD_EEREC_CPUSPD: /* CPU speed */
- if (rlen == 1)
- ep->mpc.cpuspd = *rdat;
- break;
-
- case HYMOD_EEREC_CPMSPD: /* CPM speed */
- if (rlen == 1)
- ep->mpc.cpmspd = *rdat;
- break;
-
- case HYMOD_EEREC_BUSSPD: /* bus speed */
- if (rlen == 1)
- ep->mpc.busspd = *rdat;
- break;
-
- case HYMOD_EEREC_HSTYPE: /* hs-serial chip type */
- if (rlen == 1)
- ep->hss.type = *rdat;
- break;
-
- case HYMOD_EEREC_HSCHIN: /* num hs-serial input chans */
- if (rlen == 1)
- ep->hss.nchin = *rdat;
- break;
-
- case HYMOD_EEREC_HSCHOUT: /* num hs-serial output chans */
- if (rlen == 1)
- ep->hss.nchout = *rdat;
- break;
-
- default: /* ignore */
- break;
- }
- }
-
- return (1);
-}
-
-/* maps an ascii "name=value" into a binary eeprom data record */
-typedef
- struct _eerec_map {
- char *name;
- uint type;
- uchar *(*handler) \
- (struct _eerec_map *, uchar *, uchar *, uchar *);
- uint length;
- uint maxlen;
- }
-eerec_map_t;
-
-static uchar *
-uint_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- char *eval;
- ulong lval;
-
- lval = simple_strtol ((char *)val, &eval, 10);
-
- if ((uchar *)eval == val || *eval != '\0') {
- printf ("%s rec (%s) is not a valid uint\n", rp->name, val);
- return (NULL);
- }
-
- if (dp + 2 + rp->length > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = rp->length;
-
- switch (rp->length) {
-
- case 1:
- if (lval >= 256) {
- printf ("%s rec value (%lu) out of range (0-255)\n",
- rp->name, lval);
- return (NULL);
- }
- *dp++ = lval;
- break;
-
- case 2:
- if (lval >= 65536) {
- printf ("%s rec value (%lu) out of range (0-65535)\n",
- rp->name, lval);
- return (NULL);
- }
- *dp++ = lval >> 8;
- *dp++ = lval;
- break;
-
- case 4:
- *dp++ = lval >> 24;
- *dp++ = lval >> 16;
- *dp++ = lval >> 8;
- *dp++ = lval;
- break;
-
- default:
- printf ("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length);
- return (NULL);
- }
-
- return (dp);
-}
-
-static uchar *
-date_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- hymod_date_t date;
- char *p = (char *)val;
- char *ep;
- ulong lval;
-
- lval = simple_strtol (p, &ep, 10);
- if (ep == p || *ep++ != '-') {
-bad_date:
- printf ("%s rec (%s) is not a valid date\n", rp->name, val);
- return (NULL);
- }
- if (lval >= 65536)
- goto bad_date;
- date.year = lval;
-
- lval = simple_strtol (p = ep, &ep, 10);
- if (ep == p || *ep++ != '-' || lval == 0 || lval > 12)
- goto bad_date;
- date.month = lval;
-
- lval = simple_strtol (p = ep, &ep, 10);
- if (ep == p || *ep != '\0' || lval == 0 || lval > 31)
- goto bad_date;
- date.day = lval;
-
- if (dp + 2 + rp->length > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = rp->length;
- *dp++ = date.year >> 8;
- *dp++ = date.year;
- *dp++ = date.month;
- *dp++ = date.day;
-
- return (dp);
-}
-
-static uchar *
-string_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- uint len;
-
- if ((len = strlen ((char *)val)) > rp->maxlen) {
- printf ("%s rec (%s) string is too long (%d>%d)\n",
- rp->name, val, len, rp->maxlen);
- return (NULL);
- }
-
- if (dp + 2 + len > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = len;
- memcpy (dp, val, len);
- dp += len;
-
- return (dp);
-}
-
-static uchar *
-bytes_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- uchar bytes[HYMOD_MAX_BYTES], nbytes, *p;
- char *ep;
-
- for (nbytes = 0, p = val; *p != '\0'; p = (uchar *)ep) {
- ulong lval;
-
- lval = simple_strtol ((char *)p, &ep, 10);
- if ((uchar *)ep == p || (*ep != '\0' && *ep != ',') || \
- lval >= 256) {
- printf ("%s rec (%s) byte array has invalid uint\n",
- rp->name, val);
- return (NULL);
- }
- if (nbytes >= HYMOD_MAX_BYTES) {
- printf ("%s rec (%s) byte array too long\n",
- rp->name, val);
- return (NULL);
- }
- bytes[nbytes++] = lval;
-
- if (*ep != '\0')
- ep++;
- }
-
- if (dp + 2 + nbytes > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = nbytes;
- memcpy (dp, bytes, nbytes);
- dp += nbytes;
-
- return (dp);
-}
-
-static eerec_map_t eerec_map[] = {
- /* name type handler len max */
- { "serno", HYMOD_EEREC_SERNO, uint_handler, 4, 0 },
- { "date", HYMOD_EEREC_DATE, date_handler, 4, 0 },
- { "batch", HYMOD_EEREC_BATCH, string_handler, 0, HYMOD_MAX_BATCH },
- { "type", HYMOD_EEREC_TYPE, uint_handler, 1, 0 },
- { "rev", HYMOD_EEREC_REV, uint_handler, 1, 0 },
- { "sdram", HYMOD_EEREC_SDRAM, bytes_handler, 0, HYMOD_MAX_SDRAM },
- { "flash", HYMOD_EEREC_FLASH, bytes_handler, 0, HYMOD_MAX_FLASH },
- { "zbt", HYMOD_EEREC_ZBT, bytes_handler, 0, HYMOD_MAX_ZBT },
- { "xlxtyp", HYMOD_EEREC_XLXTYP, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxspd", HYMOD_EEREC_XLXSPD, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxtmp", HYMOD_EEREC_XLXTMP, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxgrd", HYMOD_EEREC_XLXGRD, bytes_handler, 0, HYMOD_MAX_XLX },
- { "cputyp", HYMOD_EEREC_CPUTYP, uint_handler, 1, 0 },
- { "cpuspd", HYMOD_EEREC_CPUSPD, uint_handler, 1, 0 },
- { "cpmspd", HYMOD_EEREC_CPMSPD, uint_handler, 1, 0 },
- { "busspd", HYMOD_EEREC_BUSSPD, uint_handler, 1, 0 },
- { "hstype", HYMOD_EEREC_HSTYPE, uint_handler, 1, 0 },
- { "hschin", HYMOD_EEREC_HSCHIN, uint_handler, 1, 0 },
- { "hschout", HYMOD_EEREC_HSCHOUT, uint_handler, 1, 0 },
-};
-
-static int neerecs = sizeof eerec_map / sizeof eerec_map[0];
-
-static uchar data[HYMOD_EEPROM_SIZE], *sdp, *dp, *edp;
-
-static int
-eerec_callback (uchar *name, uchar *val)
-{
- eerec_map_t *rp;
-
- for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++)
- if (strcmp ((char *)name, rp->name) == 0)
- break;
-
- if (rp >= &eerec_map[neerecs])
- return (0);
-
- if ((dp = (*rp->handler) (rp, val, dp, edp)) == NULL)
- return (0);
-
- return (1);
-}
-
-static int
-hymod_eeprom_fetch(int which, char *filename, ulong addr)
-{
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
- ulong crc;
-
- memset (hp, 0, sizeof *hp);
- hp->id = HYMOD_EEPROM_ID;
- hp->ver = HYMOD_EEPROM_VER;
-
- dp = sdp = (uchar *)(hp + 1);
- edp = dp + HYMOD_EEPROM_MAXLEN;
-
- if (fetch_and_parse (filename, addr, eerec_callback) == 0)
- return (0);
-
- hp->len = dp - sdp;
-
- crc = crc32 (0, data, dp - data);
- memcpy (dp, &crc, sizeof (ulong));
- dp += sizeof (ulong);
-
- eeprom_write (dev_addr, 0, data, dp - data);
-
- return (1);
-}
-
-static char *type_vals[] = {
- "NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY"
-};
-
-static char *xlxtyp_vals[] = {
- "NONE", "XCV300E", "XCV400E", "XCV600E"
-};
-
-static char *xlxspd_vals[] = {
- "NONE", "6", "7", "8"
-};
-
-static char *xlxtmp_vals[] = {
- "NONE", "COM", "IND"
-};
-
-static char *xlxgrd_vals[] = {
- "NONE", "NORMAL", "ENGSAMP"
-};
-
-static char *cputyp_vals[] = {
- "NONE", "MPC8260"
-};
-
-static char *clk_vals[] = {
- "NONE", "33", "66", "100", "133", "166", "200"
-};
-
-static char *hstype_vals[] = {
- "NONE", "AMCC-S2064A"
-};
-
-static void
-print_mem (char *l, char *s, uchar n, uchar a[])
-{
- if (n > 0) {
- if (n == 1)
- printf ("%s%dMB %s", s, 1 << (a[0] - 20), l);
- else {
- ulong t = 0;
- int i;
-
- for (i = 0; i < n; i++)
- t += 1 << (a[i] - 20);
-
- printf ("%s%luMB %s (%d banks:", s, t, l, n);
-
- for (i = 0; i < n; i++)
- printf ("%dMB%s",
- 1 << (a[i] - 20),
- (i == n - 1) ? ")" : ",");
- }
- }
- else
- printf ("%sNO %s", s, l);
-}
-
-void
-hymod_eeprom_print (hymod_eeprom_t *ep)
-{
- int i;
-
- printf (" Hymod %s board, rev %03d\n",
- type_vals[ep->bdtype], ep->bdrev);
-
- printf (" serial #: %010lu, date %04d-%02d-%02d",
- ep->serno, ep->date.year, ep->date.month, ep->date.day);
- if (ep->batchlen > 0)
- printf (", batch \"%.*s\"", ep->batchlen, ep->batch);
- puts ("\n");
-
- switch (ep->bdtype) {
-
- case HYMOD_BDTYPE_IO:
- case HYMOD_BDTYPE_CLP:
- case HYMOD_BDTYPE_DSP:
- printf (" Motorola %s CPU, speeds: %s/%s/%s",
- cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd],
- clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]);
-
- print_mem ("SDRAM", ", ", ep->nsdram, ep->sdramsz);
-
- print_mem ("FLASH", ", ", ep->nflash, ep->flashsz);
-
- puts ("\n");
-
- print_mem ("ZBT", " ", ep->nzbt, ep->zbtsz);
-
- if (ep->nxlx > 0) {
- hymod_xlx_t *xp;
-
- if (ep->nxlx == 1) {
- xp = &ep->xlx[0];
- printf (", Xilinx %s FPGA (%s/%s/%s)",
- xlxtyp_vals[xp->type],
- xlxspd_vals[xp->speed],
- xlxtmp_vals[xp->temp],
- xlxgrd_vals[xp->grade]);
- }
- else {
- printf (", %d Xilinx FPGAs (", ep->nxlx);
- for (i = 0; i < ep->nxlx; i++) {
- xp = &ep->xlx[i];
- printf ("%s[%s/%s/%s]%s",
- xlxtyp_vals[xp->type],
- xlxspd_vals[xp->speed],
- xlxtmp_vals[xp->temp],
- xlxgrd_vals[xp->grade],
- (i == ep->nxlx - 1) ? ")" : ", ");
- }
- }
- }
- else
- puts(", NO FPGAs");
-
- puts ("\n");
-
- if (ep->hss.type > 0)
- printf (" High Speed Serial: "
- "%s, %d input%s, %d output%s\n",
- hstype_vals[ep->hss.type],
- ep->hss.nchin,
- (ep->hss.nchin == 1 ? "" : "s"),
- ep->hss.nchout,
- (ep->hss.nchout == 1 ? "" : "s"));
- break;
-
- case HYMOD_BDTYPE_INPUT:
- case HYMOD_BDTYPE_ALTINPUT:
- case HYMOD_BDTYPE_DISPLAY:
- break;
-
- default:
- /* crap! */
- printf (" UNKNOWN BOARD TYPE: %d\n", ep->bdtype);
- break;
- }
-}
-
-int
-hymod_eeprom_read (int which, hymod_eeprom_t *ep)
-{
- char *label = which ? "mezzanine" : "main";
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- char filename[50], prompt[50], *dir;
- int serno, count = 0, rc;
-
- rc = eeprom_probe (dev_addr, 0);
-
- if (rc > 0) {
- printf ("*** probe for eeprom failed with code %d\n", rc);
- return (0);
- }
-
- if (rc < 0)
- return (rc);
-
- sprintf (prompt, "Enter %s board serial number: ", label);
-
- if ((dir = getenv ("bddb_cfgdir")) == NULL)
- dir = def_bddb_cfgdir;
-
- for (;;) {
- int rc;
-
- if (hymod_eeprom_load (which, ep))
- return (1);
-
- printf ("*** %s board EEPROM contents are %sinvalid\n",
- label, count == 0 ? "" : "STILL ");
-
- puts ("*** will fetch from server (Ctrl-C to abort)\n");
-
- serno = hymod_get_serno (prompt);
-
- if (serno < 0) {
- if (serno == -1)
- puts ("\n*** interrupted!");
- else
- puts ("\n*** timeout!");
- puts (" - ignoring eeprom contents\n");
- return (0);
- }
-
- sprintf (filename, "%s/%010d.cfg", dir, serno);
-
- printf ("*** fetching %s board EEPROM contents from server\n",
- label);
-
- rc = hymod_eeprom_fetch (which, filename, CONFIG_SYS_LOAD_ADDR);
-
- if (rc == 0) {
- puts ("*** fetch failed - ignoring eeprom contents\n");
- return (0);
- }
-
- count++;
- }
-}
diff --git a/board/hymod/env.c b/board/hymod/env.c
deleted file mode 100644
index 66c5115..0000000
--- a/board/hymod/env.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * (C) Copyright 2003
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* imports from fetch.c */
-extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
-
-/* this is relative to the root of the server's tftp directory */
-static char *def_global_env_path = "/hymod/global_env";
-
-static int
-env_callback (uchar *name, uchar *value)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- char ov[CONFIG_SYS_CBSIZE], nv[CONFIG_SYS_CBSIZE], *p, *q, *nn, c, *curver, *newver;
- int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
-
- nn = (char *)name;
-
- if (*nn == '-') {
- override = 0;
- nn++;
- }
-
- while (isblank(*nn))
- nn++;
-
- if ((nnl = strlen (nn)) == 0) {
- printf ("Empty name in global env file\n");
- return (0);
- }
-
- if ((c = nn[nnl - 1]) == '+' || c == '-') {
- if (c == '+')
- append = 1;
- else
- remove = 1;
- nn[--nnl] = '\0';
- }
-
- while (nnl > 0 && isblank(nn[nnl - 1]))
- nn[--nnl] = '\0';
- if (nnl == 0) {
- printf ("Empty name in global env file\n");
- return (0);
- }
-
- p = (char *)value;
- q = nv;
-
- while (isblank(*p))
- p++;
-
- nvl = strlen (p);
- while (nvl > 0 && isblank(p[nvl - 1]))
- p[--nvl] = '\0';
-
- while ((*q = *p++) != '\0') {
- if (*q == '%') {
- switch (*p++) {
-
- case '\0': /* whoops - back up */
- p--;
- break;
-
- case '%': /* a single percent character */
- q++;
- break;
-
- case 's': /* main board serial number as string */
- q += sprintf (q, "%010lu",
- cp->main.eeprom.serno);
- break;
-
- case 'S': /* main board serial number as number */
- q += sprintf (q, "%lu", cp->main.eeprom.serno);
- break;
-
- default: /* ignore any others */
- break;
- }
- }
- else
- q++;
- }
-
- if ((nvl = q - nv) == 0) {
- setenv (nn, NULL);
- return (1);
- }
-
- if ((curver = getenv ("global_env_version")) == NULL)
- curver = "unknown";
-
- if ((newver = getenv ("new_genv_version")) == NULL || \
- strcmp (curver, newver) == 0) {
- if (strcmp (nn, "version") == 0)
- setenv ("new_genv_version", nv);
- return (1);
- }
-
- if ((p = getenv (nn)) != NULL) {
-
- strcpy (ov, p);
- ovl = strlen (ov);
-
- if (append) {
-
- if (strstr (ov, nv) == NULL) {
-
- printf ("Appending '%s' to env var '%s'\n",
- nv, nn);
-
- while (nvl >= 0) {
- nv[ovl + 1 + nvl] = nv[nvl];
- nvl--;
- }
-
- nv[ovl] = ' ';
-
- while (--ovl >= 0)
- nv[ovl] = ov[ovl];
-
- setenv (nn, nv);
- }
-
- return (1);
- }
-
- if (remove) {
-
- if (strstr (ov, nv) != NULL) {
-
- printf ("Removing '%s' from env var '%s'\n",
- nv, nn);
-
- while ((p = strstr (ov, nv)) != NULL) {
- q = p + nvl;
- if (*q == ' ')
- q++;
- strcpy(p, q);
- }
-
- setenv (nn, ov);
- }
-
- return (1);
- }
-
- if (!override || strcmp (ov, nv) == 0)
- return (1);
-
- printf ("Re-setting env cmd '%s' from '%s' to '%s'\n",
- nn, ov, nv);
- }
- else
- printf ("Setting env cmd '%s' to '%s'\n", nn, nv);
-
- setenv (nn, nv);
- return (1);
-}
-
-void
-hymod_check_env (void)
-{
- char *p, *path, *curver, *newver;
- int firsttime = 0, needsave = 0;
-
- if (getenv ("global_env_loaded") == NULL) {
- puts ("*** global environment has never been loaded\n");
- puts ("*** fetching from server");
- firsttime = 1;
- }
- else if ((p = getenv ("always_check_env")) != NULL &&
- strcmp (p, "yes") == 0)
- puts ("*** checking for updated global environment");
- else
- return;
-
- puts (" (Control-C to Abort)\n");
-
- if ((path = getenv ("global_env_path")) == NULL || *path == '\0')
- path = def_global_env_path;
-
- if (fetch_and_parse (path, CONFIG_SYS_LOAD_ADDR, env_callback) == 0) {
- puts ("*** Fetch of global environment failed!\n");
- return;
- }
-
- if ((newver = getenv ("new_genv_version")) == NULL) {
- puts ("*** Version number not set - contents ignored!\n");
- return;
- }
-
- if ((curver = getenv ("global_env_version")) == NULL || \
- strcmp (curver, newver) != 0) {
- setenv ("global_env_version", newver);
- needsave = 1;
- }
- else
- printf ("*** Global environment up-to-date (ver %s)\n", curver);
-
- setenv ("new_genv_version", NULL);
-
- if (firsttime) {
- setenv ("global_env_loaded", "yes");
- needsave = 1;
- }
-
- if (needsave)
- puts ("\n*** Remember to run the 'saveenv' "
- "command to save the changes\n\n");
-}
diff --git a/board/hymod/fetch.c b/board/hymod/fetch.c
deleted file mode 100644
index da9373f..0000000
--- a/board/hymod/fetch.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-
-/* imports from input.c */
-extern int hymod_get_ethaddr (void);
-
-int
-fetch_and_parse (char *fn, ulong addr, int (*cback)(uchar *, uchar *))
-{
- char *ethaddr;
- uchar *fp, *efp;
- int rc, count = 0;
-
- while ((ethaddr = getenv ("ethaddr")) == NULL || *ethaddr == '\0') {
-
- printf ("*** Ethernet address is%s not set\n",
- count == 0 ? "" : " STILL");
-
- if ((rc = hymod_get_ethaddr ()) < 0) {
- if (rc == -1)
- puts ("\n*** interrupted!");
- else
- puts ("\n*** timeout!");
- printf (" - fetch of '%s' aborted\n", fn);
- return (0);
- }
-
- count++;
- }
-
- copy_filename (BootFile, fn, sizeof (BootFile));
- load_addr = addr;
- NetBootFileXferSize = 0;
-
- if (NetLoop(TFTPGET) == 0) {
- printf ("tftp transfer of file '%s' failed\n", fn);
- return (0);
- }
-
- if (NetBootFileXferSize == 0) {
- printf ("can't determine size of file '%s'\n", fn);
- return (0);
- }
-
- fp = (uchar *)load_addr;
- efp = fp + NetBootFileXferSize;
-
- do {
- uchar *name, *value;
-
- if (*fp == '#' || *fp == '\n') {
- /* skip this line */
- while (fp < efp && *fp++ != '\n')
- ;
- continue;
- }
-
- name = fp;
-
- while (fp < efp && *fp != '=' && *fp != '\n')
- fp++;
- if (fp >= efp)
- break;
- if (*fp == '\n') {
- fp++;
- continue;
- }
- *fp++ = '\0';
-
- value = fp;
-
- while (fp < efp && *fp != '\n')
- fp++;
- if (fp[-1] == '\r')
- fp[-1] = '\0';
- *fp++ = '\0'; /* ok if we go off the end here */
-
- if ((*cback)(name, value) == 0)
- return (0);
-
- } while (fp < efp);
-
- return (1);
-}
diff --git a/board/hymod/flash.c b/board/hymod/flash.c
deleted file mode 100644
index 02e519c..0000000
--- a/board/hymod/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <board/hymod/flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * probe for flash bank at address "base" and store info about it
- * in the flash_info entry "fip". Fatal error if nothing there.
- */
-static void
-bank_probe (flash_info_t *fip, volatile bank_addr_t base)
-{
- volatile bank_addr_t addr;
- bank_word_t word;
- int i;
-
- /* reset the flash */
- *base = BANK_CMD_RST;
-
- /* put flash into read id mode */
- *base = BANK_CMD_RD_ID;
-
- /* check the manufacturer id - must be intel */
- word = *BANK_REG_MAN_CODE (base);
- if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff))
- panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx",
- (unsigned long)word, (unsigned long)base);
-
- /* check the device id */
- word = *BANK_REG_DEV_CODE (base);
- switch (word) {
-
- case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J5;
- fip->sector_count = 32;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F640J5&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J5;
- fip->sector_count = 64;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F320J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J3A;
- fip->sector_count = 32;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F640J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J3A;
- fip->sector_count = 64;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F128J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F128J3A;
- fip->sector_count = 128;
- break;
-
- default:
- panic ("\nbad device code (0x%08lx) at addr 0x%08lx",
- (unsigned long)word, (unsigned long)base);
- }
-
- if (fip->sector_count >= CONFIG_SYS_MAX_FLASH_SECT)
- panic ("\ntoo many sectors (%d) in flash at address 0x%08lx",
- fip->sector_count, (unsigned long)base);
-
- addr = base;
- for (i = 0; i < fip->sector_count; i++) {
- fip->start[i] = (unsigned long)addr;
- fip->protect[i] = 0;
- addr = BANK_ADDR_NEXT_BLK (addr);
- }
-
- fip->size = (bank_size_t)addr - (bank_size_t)base;
-
- /* reset the flash */
- *base = BANK_CMD_RST;
-}
-
-static void
-bank_reset (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
-
-#ifdef FLASH_DEBUG
- printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr);
-#endif
-
- *addr = BANK_CMD_RST;
-}
-
-static void
-bank_erase_init (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
- int flag;
-
-#ifdef FLASH_DEBUG
- printf ("erasing sector %d, addr = 0x%08lx\n",
- sect, (unsigned long)addr);
-#endif
-
- /* Disable intrs which might cause a timeout here */
- flag = disable_interrupts ();
-
-#ifdef FLASH_DEBUG
- printf ("writing erase cmd to addr 0x%08lx\n", (unsigned long)addr);
-#endif
- *addr = BANK_CMD_ERASE1;
- *addr = BANK_CMD_ERASE2;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-}
-
-static int
-bank_erase_poll (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
- bank_word_t stat = *addr;
-
-#ifdef FLASH_DEBUG
- printf ("checking status at addr 0x%08lx [0x%08lx]\n",
- (unsigned long)addr, (unsigned long)stat);
-#endif
-
- if ((stat & BANK_STAT_RDY) == BANK_STAT_RDY) {
- if ((stat & BANK_STAT_ERR) != 0) {
- printf ("failed on sector %d [0x%08lx] at "
- "address 0x%08lx\n", sect,
- (unsigned long)stat, (unsigned long)addr);
- *addr = BANK_CMD_CLR_STAT;
- return (-1);
- }
- else
- return (1);
- }
- else
- return (0);
-}
-
-static int
-bank_write_word (volatile bank_addr_t addr, bank_word_t value)
-{
- bank_word_t stat;
- ulong start;
- int flag, retval;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = BANK_CMD_PROG;
-
- *addr = value;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- retval = 0;
-
- /* data polling for D7 */
- start = get_timer (0);
- do {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- retval = 1;
- goto done;
- }
- stat = *addr;
- } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
-
- if ((stat & BANK_STAT_ERR) != 0) {
- printf ("flash program failed [0x%08lx] at address 0x%08lx\n",
- (unsigned long)stat, (unsigned long)addr);
- *addr = BANK_CMD_CLR_STAT;
- retval = 3;
- }
-
-done:
- /* reset to read mode */
- *addr = BANK_CMD_RST;
-
- return (retval);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long
-flash_init (void)
-{
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- bank_probe (&flash_info[0], (bank_addr_t)CONFIG_SYS_FLASH_BASE);
-
- /*
- * protect monitor and environment sectors
- */
-
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- (void)flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_SYS_FLASH_ENV_ADDR)
- (void)flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_ENV_ADDR,
-#if defined(CONFIG_SYS_FLASH_ENV_BUF)
- CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_BUF - 1,
-#else
- CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_SIZE - 1,
-#endif
- &flash_info[0]);
-#endif
-
- return flash_info[0].size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J5: printf ("28F320J5 (32 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F640J5: printf ("28F640J5 (64 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F320J3A: printf ("28F320J3A (32 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F128J3A: printf ("28F320J3A (128 Mbit, 2 x 16bit)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int prot, sect, haderr;
- ulong start, now, last;
- int rcode = 0;
-
-#ifdef FLASH_DEBUG
- printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
- " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
- (info - flash_info) + 1);
- flash_print_info (info);
-#endif
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sector%s will not be erased\n",
- prot, (prot > 1 ? "s" : ""));
- }
-
- start = get_timer (0);
- last = 0;
- haderr = 0;
-
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- ulong estart;
- int sectdone;
-
- bank_erase_init (info, sect);
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- estart = get_timer (start);
-
- do {
- now = get_timer (start);
-
- if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout (sect %d)\n", sect);
- haderr = 1;
- rcode = 1;
- break;
- }
-
-#ifndef FLASH_DEBUG
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
-#endif
-
- sectdone = bank_erase_poll (info, sect);
-
- if (sectdone < 0) {
- haderr = 1;
- rcode = 1;
- break;
- }
-
- } while (!sectdone);
-
- if (haderr)
- break;
- }
- }
-
- if (haderr > 0)
- printf (" failed\n");
- else
- printf (" done\n");
-
- /* reset to read mode */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- bank_reset (info, sect);
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 3 - Program failed
- */
-static int
-write_word (flash_info_t *info, ulong dest, ulong data)
-{
- /* Check if Flash is (sufficiently) erased */
- if ((*(ulong *)dest & data) != data)
- return (2);
-
- return (bank_write_word ((bank_addr_t)dest, (bank_word_t)data));
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 3 - Program failed
- */
-
-int
-write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/hymod/flash.h b/board/hymod/flash.h
deleted file mode 100644
index 6ea2823..0000000
--- a/board/hymod/flash.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
-
-/* Commands */
-#define ISF_CMD_RST 0xFF /* reset flash */
-#define ISF_CMD_RD_ID 0x90 /* read the id and lock bits */
-#define ISF_CMD_RD_QUERY 0x98 /* read device capabilities */
-#define ISF_CMD_RD_STAT 0x70 /* read the status register */
-#define ISF_CMD_CLR_STAT 0x50 /* clear the staus register */
-#define ISF_CMD_WR_BUF 0xE8 /* clear the staus register */
-#define ISF_CMD_PROG 0x40 /* program word command */
-#define ISF_CMD_ERASE1 0x20 /* 1st word for block erase */
-#define ISF_CMD_ERASE2 0xD0 /* 2nd word for block erase */
-#define ISF_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
-#define ISF_CMD_LOCK 0x60 /* 1st word for all lock cmds */
-#define ISF_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
-#define ISF_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
-#define ISF_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
-
-/* status register bits */
-#define ISF_STAT_DPS 0x02 /* Device Protect Status */
-#define ISF_STAT_VPPS 0x08 /* VPP Status */
-#define ISF_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
-#define ISF_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
-#define ISF_STAT_ESS 0x40 /* Erase Suspend Status */
-#define ISF_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
-
-#define ISF_STAT_ERR (ISF_STAT_VPPS | ISF_STAT_DPS | \
- ISF_STAT_ECLBS | ISF_STAT_PSLBS)
-
-/* register addresses, valid only following an ISF_CMD_RD_ID command */
-#define ISF_REG_MAN_CODE 0x00 /* manufacturer code */
-#define ISF_REG_DEV_CODE 0x01 /* device code */
-#define ISF_REG_BLK_LCK 0x02 /* block lock configuration */
-#define ISF_REG_MST_LCK 0x03 /* master lock configuration */
-
-/********************** DEFINES for Hymod Flash ******************************/
-
-/*
- * this code requires that the flash on any Hymod board appear as a bank
- * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase
- * sectors (or blocks), running in x16 bit mode and connected side-by-side
- * to make a 32-bit wide bus.
- */
-
-typedef unsigned long bank_word_t;
-typedef bank_word_t bank_blk_t[64 * 1024];
-
-#define BANK_FILL_WORD(b) (((bank_word_t)(b) << 16) | (bank_word_t)(b))
-
-#ifdef EXAMPLE
-
-/* theoretically the following examples should also work */
-
-/* one flash chip in x8 mode with 128Kword sectors and 8bit bus */
-typedef unsigned char bank_word_t;
-typedef bank_word_t bank_blk_t[128 * 1024];
-#define BANK_FILL_WORD(b) ((bank_word_t)(b))
-
-/* four flash chips in x16 mode with 32Kword sectors and 64bit bus */
-typedef unsigned long long bank_word_t;
-typedef bank_word_t bank_blk_t[32 * 1024];
-#define BANK_FILL_WORD(b) ( \
- ((bank_word_t)(b) << 48) \
- ((bank_word_t)(b) << 32) \
- ((bank_word_t)(b) << 16) \
- ((bank_word_t)(b) << 0) \
- )
-
-#endif /* EXAMPLE */
-
-/* the sizes of these two types should probably be the same */
-typedef bank_word_t *bank_addr_t;
-typedef unsigned long bank_size_t;
-
-/* align bank addresses and sizes to bank word boundaries */
-#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(sizeof (bank_word_t) - 1)))
-#define BANK_SIZE_WORD_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_word_t) - 1) \
- & ~(sizeof (bank_word_t) - 1))
-
-/* align bank addresses and sizes to bank block boundaries */
-#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(sizeof (bank_blk_t) - 1)))
-#define BANK_SIZE_BLK_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \
- & ~(sizeof (bank_blk_t) - 1))
-
-/* add an offset to a bank address */
-#define BANK_ADDR_OFFSET(a, o) ((bank_addr_t)((bank_size_t)(a) + \
- (bank_size_t)(o)))
-
-/* adjust a bank address to start of next word, block or bank */
-#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
- sizeof (bank_word_t))
-#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
- sizeof (bank_blk_t))
-
-/* get bank address of register r given a bank base address a and block num b */
-#define BANK_ADDR_REG(a, b, r) BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \
- (bank_size_t)(b) * sizeof (bank_blk_t)), \
- (bank_size_t)(r) * sizeof (bank_word_t))
-
-/* make a bank word value for each StrataFlash value */
-
-/* Commands */
-#define BANK_CMD_RST BANK_FILL_WORD(ISF_CMD_RST)
-#define BANK_CMD_RD_ID BANK_FILL_WORD(ISF_CMD_RD_ID)
-#define BANK_CMD_RD_STAT BANK_FILL_WORD(ISF_CMD_RD_STAT)
-#define BANK_CMD_CLR_STAT BANK_FILL_WORD(ISF_CMD_CLR_STAT)
-#define BANK_CMD_ERASE1 BANK_FILL_WORD(ISF_CMD_ERASE1)
-#define BANK_CMD_ERASE2 BANK_FILL_WORD(ISF_CMD_ERASE2)
-#define BANK_CMD_PROG BANK_FILL_WORD(ISF_CMD_PROG)
-#define BANK_CMD_LOCK BANK_FILL_WORD(ISF_CMD_LOCK)
-#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK)
-#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR)
-#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK)
-
-/* status register bits */
-#define BANK_STAT_DPS BANK_FILL_WORD(ISF_STAT_DPS)
-#define BANK_STAT_PSS BANK_FILL_WORD(ISF_STAT_PSS)
-#define BANK_STAT_VPPS BANK_FILL_WORD(ISF_STAT_VPPS)
-#define BANK_STAT_PSLBS BANK_FILL_WORD(ISF_STAT_PSLBS)
-#define BANK_STAT_ECLBS BANK_FILL_WORD(ISF_STAT_ECLBS)
-#define BANK_STAT_ESS BANK_FILL_WORD(ISF_STAT_ESS)
-#define BANK_STAT_RDY BANK_FILL_WORD(ISF_STAT_RDY)
-
-#define BANK_STAT_ERR BANK_FILL_WORD(ISF_STAT_ERR)
-
-/* make a bank register address for each StrataFlash register address */
-
-#define BANK_REG_MAN_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE)
-#define BANK_REG_DEV_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE)
-#define BANK_REG_BLK_LCK(a, b) BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK)
-#define BANK_REG_MST_LCK(a) BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK)
diff --git a/board/hymod/global_env b/board/hymod/global_env
deleted file mode 100644
index ac12fd7..0000000
--- a/board/hymod/global_env
+++ /dev/null
@@ -1,145 +0,0 @@
-# DONT FORGET TO CHANGE THE "version" VAR BELOW IF YOU MAKE CHANGES TO THIS FILE
-
-# (C) Copyright 2001
-# Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-#
-# global_env
-#
-# file used by Hymod boards to initialise the u-boot non-volatile
-# environment when u-boot is first run (it determines this by the
-# absence of the environment variable "global_env_loaded")
-#
-# format of this file is:
-#
-# 1. blank lines and lines beginning with '#' are ignored
-# 2. all other lines must have the form <name>=<value>
-# 3. if a percent appears anywhere, it is replaced like so:
-#
-# %s serial number of the main board (10 digit zero filled)
-# %S serial number of the main board (plain number)
-# %% a percentage character
-# ... otherwise the %x is discarded
-#
-# if first character in <name> is a dash ('-'), then an existing env var
-# will not be overwritten (the dash is removed). i.e. it is only set if
-# it does not exist
-#
-# if last character in <name> is a plus ('+'), then <value> will be appended
-# to any existing env var (the plus is ignored). Duplicates of <value> are
-# removed.
-#
-# similarly, if the last character in <name> is a minus ('-'), then any
-# occurences of <value> in the current value of <name> will removed (the
-# minus is ignored).
-#
-# leading and trailing whitespace is removed in both <name> and <value>
-# (after processing any initial or final plus/minus in <name>).
-#
-
-# MISCELLANEOUS PARAMETERS
-
-# version must always come first
-version=4
-
-# set the ip address based on the main board serial number
-ipaddr=192.168.1.%S
-serverip=192.168.1.254
-
-# stop auto execute after tftp (not a very good name really)
-autostart=no
-
-# setting this to "yes" forces the global_env file to be loaded and processed
-# if the current version is different to the version in the file
-always_check_env=no
-
-# BOOTING COMMANDS AND PARAMETERS
-
-# command to run when "auto-booting"
-bootcmd=bootm 40080000
-
-# how long the "countdown" to automatically running "bootcmd" is
-bootdelay=2
-
-# how long before it "times out" console input and attempts to run "bootcmd"
-bootretry=5
-
-# arguments passed to the boot program (i.e. linux kernel) via register 6
-# the linux kernel (v2.4) uses the following registers:
-# r3 - address of board information structure
-# r4 - address of initial ramdisk image (0 means no initrd)
-# r5 - size of initial ramdisk image
-# r6 - address of command line string
--bootargs=root=/dev/mtdblock5 rootfstype=squashfs ro
-
-# these four are for hymod linux integrated into our Sun network
-bootargs+=serialno=%S
-bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
-bootargs+=nfsclient
-bootargs+=automount
-
-# start a web server by default
-bootargs+=webserver
-
-# give negotiation time to finish
-bootargs+=netsleep=5
-
-# then our ciscos don't pass packets for 25-30 secs after that, so
-# pinging the server until it responds prevents network connections
-# from failing...
-bootargs+=netping
-
-# these are old bootargs - we don't need them anymore
-bootargs-=preload=unix,i2c-cpm,i2c-dev
-bootargs-=ramdisk_size=32768
-bootargs-=ramdisk_size=24576
-
-# FLASH MANIPULATION COMMANDS
-
-#
-# 16M flash, 64 x 256K sectors, mapped at address 0x40000000
-#
-# Sector(s) Address Size Description
-#
-# 0 - 0 0x40000000 256K boot code
-# 1 - 1 0x40040000 256K non volatile environment
-# 2 - 4 0x40080000 768K linux kernel image
-# 5 - 7 0x40140000 768K alternate linux kernel image
-# 8 - 47 0x40200000 10M linux initial ramdisk image
-# 48 - 63 0x40c00000 4M ramdisk image for applications
-#
-
-fetchboot=tftp 100000 /hymod/u-boot.bin
-eraseboot=protect off 1:0 ; erase 1:0 ; protect on 1:0
-copyboot=protect off 1:0 ; cp.b 100000 40000000 40000 ; protect on 1:0
-cmpboot=cmp.b 100000 40000000 40000
-newboot=run fetchboot eraseboot copyboot cmpboot
-
-fetchlinux=tftp 100000 /hymod/linux.bin
-eraselinux=erase 1:2-4
-copylinux=cp.b 100000 40080000 ${filesize}
-cmplinux=cmp.b 100000 40080000 ${filesize}
-newlinux=run fetchlinux eraselinux copylinux cmplinux
-
-fetchaltlinux=tftp 100000 /hymod/altlinux.bin
-erasealtlinux=erase 1:5-7
-copyaltlinux=cp.b 100000 40140000 ${filesize}
-cmpaltlinux=cmp.b 100000 40140000 ${filesize}
-newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux
-
-fetchroot=tftp 100000 /hymod/root.bin
-eraseroot=erase 1:8-47
-copyroot=cp.b 100000 40200000 ${filesize}
-cmproot=cmp.b 100000 40200000 ${filesize}
-newroot=run fetchroot eraseroot copyroot cmproot
-
-fetchard=tftp 100000 /hymod/apprd.bin
-eraseard=erase 1:48-63
-copyard=cp.b 100000 40c00000 ${filesize}
-cmpard=cmp.b 100000 40c00000 ${filesize}
-newapprd=run fetchard eraseard copyard cmpard
-
-# pass above map to linux mtd driver
-bootargs+=mtdparts=phys:256k(u-boot),256k(u-boot-env),768k(linux),768k(altlinux),10m(root),4m(hymod)
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
deleted file mode 100644
index 0183f78..0000000
--- a/board/hymod/hymod.c
+++ /dev/null
@@ -1,521 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Hacked for the Hymod board by Murray.Jensen at csiro.au, 20-Oct-00
- */
-
-#include <common.h>
-#include <bootretry.h>
-#include <cli.h>
-#include <mpc8260.h>
-#include <mpc8260_irq.h>
-#include <ioports.h>
-#include <i2c.h>
-#include <asm/iopin_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* imports from eeprom.c */
-extern int hymod_eeprom_read (int, hymod_eeprom_t *);
-extern void hymod_eeprom_print (hymod_eeprom_t *);
-
-/* imports from env.c */
-extern void hymod_check_env (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 1, 0, 0, 0 }, /* PA31: FCC1 MII COL */
- { 1, 1, 1, 0, 0, 0 }, /* PA30: FCC1 MII CRS */
- { 1, 1, 1, 1, 0, 0 }, /* PA29: FCC1 MII TX_ER */
- { 1, 1, 1, 1, 0, 0 }, /* PA28: FCC1 MII TX_EN */
- { 1, 1, 1, 0, 0, 0 }, /* PA27: FCC1 MII RX_DV */
- { 1, 1, 1, 0, 0, 0 }, /* PA26: FCC1 MII RX_ER */
- { 1, 0, 0, 1, 0, 0 }, /* PA25: FCC2 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA24: FCC2 MII MDC */
- { 1, 0, 0, 1, 0, 0 }, /* PA23: FCC3 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA22: FCC3 MII MDC */
- { 1, 1, 0, 1, 0, 0 }, /* PA21: FCC1 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PA20: FCC1 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PA19: FCC1 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PA18: FCC1 MII TxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PA17: FCC1 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PA16: FCC1 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PA15: FCC1 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PA14: FCC1 MII RxD[0] */
- { 1, 0, 0, 1, 0, 0 }, /* PA13: FCC1 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA12: FCC1 MII MDC */
- { 1, 0, 0, 1, 0, 0 }, /* PA11: SEL_CD */
- { 1, 0, 0, 0, 0, 0 }, /* PA10: FLASH STS1 */
- { 1, 0, 0, 0, 0, 0 }, /* PA09: FLASH STS0 */
- { 1, 0, 0, 0, 0, 0 }, /* PA08: FLASH ~PE */
- { 1, 0, 0, 0, 0, 0 }, /* PA07: WATCH ~HRESET */
- { 1, 0, 0, 0, 1, 0 }, /* PA06: VC DONE */
- { 1, 0, 0, 1, 1, 0 }, /* PA05: VC INIT */
- { 1, 0, 0, 1, 0, 0 }, /* PA04: VC ~PROG */
- { 1, 0, 0, 1, 0, 0 }, /* PA03: VM ENABLE */
- { 1, 0, 0, 0, 1, 0 }, /* PA02: VM DONE */
- { 1, 0, 0, 1, 1, 0 }, /* PA01: VM INIT */
- { 1, 0, 0, 1, 0, 0 } /* PA00: VM ~PROG */
- },
-
- /* Port B configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 0, 1, 0, 0 }, /* PB31: FCC2 MII TX_ER */
- { 1, 1, 0, 0, 0, 0 }, /* PB30: FCC2 MII RX_DV */
- { 1, 1, 1, 1, 0, 0 }, /* PB29: FCC2 MII TX_EN */
- { 1, 1, 0, 0, 0, 0 }, /* PB28: FCC2 MII RX_ER */
- { 1, 1, 0, 0, 0, 0 }, /* PB27: FCC2 MII COL */
- { 1, 1, 0, 0, 0, 0 }, /* PB26: FCC2 MII CRS */
- { 1, 1, 0, 1, 0, 0 }, /* PB25: FCC2 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PB24: FCC2 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PB23: FCC2 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PB22: FCC2 MII TxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PB21: FCC2 MII RxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PB20: FCC2 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PB19: FCC2 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PB18: FCC2 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PB17: FCC3 MII RX_DV */
- { 1, 1, 0, 0, 0, 0 }, /* PB16: FCC3 MII RX_ER */
- { 1, 1, 0, 1, 0, 0 }, /* PB15: FCC3 MII TX_ER */
- { 1, 1, 0, 1, 0, 0 }, /* PB14: FCC3 MII TX_EN */
- { 1, 1, 0, 0, 0, 0 }, /* PB13: FCC3 MII COL */
- { 1, 1, 0, 0, 0, 0 }, /* PB12: FCC3 MII CRS */
- { 1, 1, 0, 0, 0, 0 }, /* PB11: FCC3 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PB10: FCC3 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PB09: FCC3 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PB08: FCC3 MII RxD[0] */
- { 1, 1, 0, 1, 0, 0 }, /* PB07: FCC3 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PB06: FCC3 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PB05: FCC3 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PB04: FCC3 MII TxD[0] */
- { 0, 0, 0, 0, 0, 0 }, /* PB03: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PB02: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PB01: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 } /* PB00: pin doesn't exist */
- },
-
- /* Port C configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 0, 0, 0, 0, 0 }, /* PC31: MEZ ~IACK */
- { 0, 0, 0, 0, 0, 0 }, /* PC30: ? */
- { 1, 1, 0, 0, 0, 0 }, /* PC29: CLK SCCx */
- { 1, 1, 0, 0, 0, 0 }, /* PC28: CLK4 */
- { 1, 1, 0, 0, 0, 0 }, /* PC27: CLK SCCF */
- { 1, 1, 0, 0, 0, 0 }, /* PC26: CLK 32K */
- { 1, 1, 0, 0, 0, 0 }, /* PC25: BRG4/CLK7 */
- { 0, 0, 0, 0, 0, 0 }, /* PC24: ? */
- { 1, 1, 0, 0, 0, 0 }, /* PC23: CLK SCCx */
- { 1, 1, 0, 0, 0, 0 }, /* PC22: FCC1 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC21: FCC1 MII TX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC20: CLK SCCF */
- { 1, 1, 0, 0, 0, 0 }, /* PC19: FCC2 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC18: FCC2 MII TX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC17: FCC3 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC16: FCC3 MII TX_CLK */
- { 1, 0, 0, 0, 0, 0 }, /* PC15: SCC1 UART ~CTS */
- { 1, 0, 0, 0, 0, 0 }, /* PC14: SCC1 UART ~CD */
- { 1, 0, 0, 0, 0, 0 }, /* PC13: SCC2 UART ~CTS */
- { 1, 0, 0, 0, 0, 0 }, /* PC12: SCC2 UART ~CD */
- { 1, 0, 0, 1, 0, 0 }, /* PC11: SCC1 UART ~DTR */
- { 1, 0, 0, 1, 0, 0 }, /* PC10: SCC1 UART ~DSR */
- { 1, 0, 0, 1, 0, 0 }, /* PC09: SCC2 UART ~DTR */
- { 1, 0, 0, 1, 0, 0 }, /* PC08: SCC2 UART ~DSR */
- { 1, 0, 0, 0, 0, 0 }, /* PC07: TEMP ~ALERT */
- { 1, 0, 0, 0, 0, 0 }, /* PC06: FCC3 INT */
- { 1, 0, 0, 0, 0, 0 }, /* PC05: FCC2 INT */
- { 1, 0, 0, 0, 0, 0 }, /* PC04: FCC1 INT */
- { 0, 1, 1, 1, 0, 0 }, /* PC03: SDMA IDMA2 ~DACK */
- { 0, 1, 1, 0, 0, 0 }, /* PC02: SDMA IDMA2 ~DONE */
- { 0, 1, 0, 0, 0, 0 }, /* PC01: SDMA IDMA2 ~DREQ */
- { 1, 1, 0, 1, 0, 0 } /* PC00: BRG7 */
- },
-
- /* Port D configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 0, 0, 0, 0 }, /* PD31: SCC1 UART RxD */
- { 1, 1, 1, 1, 0, 0 }, /* PD30: SCC1 UART TxD */
- { 1, 0, 0, 1, 0, 0 }, /* PD29: SCC1 UART ~RTS */
- { 1, 1, 0, 0, 0, 0 }, /* PD28: SCC2 UART RxD */
- { 1, 1, 0, 1, 0, 0 }, /* PD27: SCC2 UART TxD */
- { 1, 0, 0, 1, 0, 0 }, /* PD26: SCC2 UART ~RTS */
- { 1, 0, 0, 0, 0, 0 }, /* PD25: SCC1 UART ~RI */
- { 1, 0, 0, 0, 0, 0 }, /* PD24: SCC2 UART ~RI */
- { 1, 0, 0, 1, 0, 0 }, /* PD23: CLKGEN PD */
- { 1, 0, 0, 0, 0, 0 }, /* PD22: USER3 */
- { 1, 0, 0, 0, 0, 0 }, /* PD21: USER2 */
- { 1, 0, 0, 0, 0, 0 }, /* PD20: USER1 */
- { 1, 1, 1, 0, 0, 0 }, /* PD19: SPI ~SEL */
- { 1, 1, 1, 0, 0, 0 }, /* PD18: SPI CLK */
- { 1, 1, 1, 0, 0, 0 }, /* PD17: SPI MOSI */
- { 1, 1, 1, 0, 0, 0 }, /* PD16: SPI MISO */
- { 1, 1, 1, 0, 1, 0 }, /* PD15: I2C SDA */
- { 1, 1, 1, 0, 1, 0 }, /* PD14: I2C SCL */
- { 1, 0, 0, 1, 0, 1 }, /* PD13: TEMP ~STDBY */
- { 1, 0, 0, 1, 0, 1 }, /* PD12: FCC3 ~RESET */
- { 1, 0, 0, 1, 0, 1 }, /* PD11: FCC2 ~RESET */
- { 1, 0, 0, 1, 0, 1 }, /* PD10: FCC1 ~RESET */
- { 1, 0, 0, 0, 0, 0 }, /* PD09: PD9 */
- { 1, 0, 0, 0, 0, 0 }, /* PD08: PD8 */
- { 1, 0, 0, 1, 0, 1 }, /* PD07: PD7 */
- { 1, 0, 0, 1, 0, 1 }, /* PD06: PD6 */
- { 1, 0, 0, 1, 0, 1 }, /* PD05: PD5 */
- { 1, 0, 0, 1, 0, 1 }, /* PD04: PD4 */
- { 0, 0, 0, 0, 0, 0 }, /* PD03: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PD02: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PD01: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 } /* PD00: pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * AMI FS6377 Clock Generator configuration table
- *
- * the "fs6377_regs[]" table entries correspond to FS6377 registers
- * 0 - 15 (total of 16 bytes).
- *
- * the data is written to the FS6377 via the i2c bus using address in
- * "fs6377_addr" (address is 7 bits - R/W bit not included).
- *
- * The fs6377 has four clock outputs: A, B, C and D.
- *
- * Outputs C and D can each provide two different clock outputs C1/D1 or
- * C2/D2 depending on the state of the SEL_CD input which is connected to
- * the MPC8260 I/O port pin PA11. PA11 output (SEL_CD input) low (or 0)
- * selects C1/D1 and PA11 output (SEL_CD input) high (or 1) selects C2/D2.
- *
- * PA11 defaults to output low (or 0) in the i/o port config table above.
- *
- * Output A provides a 100MHz for the High Speed Serial chips. Output B
- * provides a 3.6864MHz clock for more accurate asynchronous serial bit
- * rates. Output C is routed to the mezzanine connector but is currently
- * unused - both C1 and C2 are set to 16MHz. Output D is used by both the
- * alt-input and display mezzanine boards for their video chips. The
- * alt-input board requires a clock of 24.576MHz and this is available on
- * D1 (PA11=SEL_CD=0). The display board requires a clock of 27MHz and this
- * is available on D2 (PA11=SEL_CD=1).
- *
- * So the default is a clock suitable for the alt-input board. PA11 is toggled
- * later in misc_init_r(), if a display board is detected.
- */
-
-uchar fs6377_addr = 0x5c;
-
-uchar fs6377_regs[16] = {
- 12, 75, 64, 25, 144, 128, 25, 192,
- 0, 16, 135, 192, 224, 64, 64, 192
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * special board initialisation, after clocks and timebase have been
- * set up but before environment and serial are initialised.
- *
- * added so that very early initialisations can be done using the i2c
- * driver (which requires the clocks, to calculate the dividers, and
- * the timebase, for udelay())
- */
-
-int
-board_postclk_init (void)
-{
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*
- * Initialise the FS6377 clock chip
- *
- * the secondary address is the register number from where to
- * start the write - I want to write all the registers
- *
- * don't bother checking return status - we have no console yet
- * to print it on, nor any RAM to store it in - it will be obvious
- * if this doesn't work
- */
- (void) i2c_write (fs6377_addr, 0, 1, fs6377_regs,
- sizeof (fs6377_regs));
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity: Hardwired to HYMOD
- */
-
-int
-checkboard (void)
-{
- puts ("Board: HYMOD\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * miscellaneous (early - while running in flash) initialisations.
- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-uint upmb_table[] = {
- /* Read Single Beat (RSS) - offset 0x00 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Read Burst (RBS) - offset 0x08 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Single Beat (WSS) - offset 0x18 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Burst (WSS) - offset 0x20 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Refresh Timer (PTS) - offset 0x30 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Exception Condition (EXS) - offset 0x3c */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-uint upmc_table[] = {
- /* Read Single Beat (RSS) - offset 0x00 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Read Burst (RBS) - offset 0x08 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Single Beat (WSS) - offset 0x18 */
- 0xF0E00000, 0xF0A00000, 0x00A00000, 0x30A00000,
- 0xF0F40007, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Burst (WSS) - offset 0x20 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Refresh Timer (PTS) - offset 0x30 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Exception Condition (EXS) - offset 0x3c */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-int
-misc_init_f (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
- printf ("UPMs: ");
-
- upmconfig (UPMB, upmb_table, sizeof upmb_table / sizeof upmb_table[0]);
- memctl->memc_mbmr = CONFIG_SYS_MBMR;
-
- upmconfig (UPMC, upmc_table, sizeof upmc_table / sizeof upmc_table[0]);
- memctl->memc_mcmr = CONFIG_SYS_MCMR;
-
- printf ("configured\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t
-initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
- ulong psdmr = CONFIG_SYS_PSDMR;
- int i;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
-
- return (CONFIG_SYS_SDRAM_SIZE << 20);
-}
-
-/* ------------------------------------------------------------------------- */
-/* miscellaneous initialisations after relocation into ram (misc_init_r) */
-/* */
-/* loads the data in the main board and mezzanine board eeproms into */
-/* the hymod configuration struct stored in the board information area. */
-/* */
-/* if the contents of either eeprom is invalid, prompts for a serial */
-/* number (and an ethernet address if required) then fetches a file */
-/* containing information to be stored in the eeprom from the tftp server */
-/* (the file name is based on the serial number and a built-in path) */
-
-int
-last_stage_init (void)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- int rc;
-
- /*
- * we use the cli_readline() function, but we also want
- * command timeout enabled
- */
- bootretry_init_cmd_timeout();
-
- memset ((void *) cp, 0, sizeof (*cp));
-
- /* set up main board config info */
-
- rc = hymod_eeprom_read (0, &cp->main.eeprom);
-
- puts ("EEPROM:main...");
- if (rc < 0)
- puts ("NOT PRESENT\n");
- else if (rc == 0)
- puts ("INVALID\n");
- else {
- cp->main.eeprom.valid = 1;
-
- printf ("OK (ver %u)\n", cp->main.eeprom.ver);
- hymod_eeprom_print (&cp->main.eeprom);
-
- /*
- * hard-wired assumption here: all hymod main boards will have
- * one xilinx fpga, with the interrupt line connected to IRQ2
- *
- * One day, this might be based on the board type
- */
-
- cp->main.xlx[0].mmap.prog.exists = 1;
- cp->main.xlx[0].mmap.prog.size = FPGA_MAIN_CFG_SIZE;
- cp->main.xlx[0].mmap.prog.base = FPGA_MAIN_CFG_BASE;
-
- cp->main.xlx[0].mmap.reg.exists = 1;
- cp->main.xlx[0].mmap.reg.size = FPGA_MAIN_REG_SIZE;
- cp->main.xlx[0].mmap.reg.base = FPGA_MAIN_REG_BASE;
-
- cp->main.xlx[0].mmap.port.exists = 1;
- cp->main.xlx[0].mmap.port.size = FPGA_MAIN_PORT_SIZE;
- cp->main.xlx[0].mmap.port.base = FPGA_MAIN_PORT_BASE;
-
- cp->main.xlx[0].iopins.prog_pin.port = FPGA_MAIN_PROG_PORT;
- cp->main.xlx[0].iopins.prog_pin.pin = FPGA_MAIN_PROG_PIN;
- cp->main.xlx[0].iopins.prog_pin.flag = 1;
- cp->main.xlx[0].iopins.init_pin.port = FPGA_MAIN_INIT_PORT;
- cp->main.xlx[0].iopins.init_pin.pin = FPGA_MAIN_INIT_PIN;
- cp->main.xlx[0].iopins.init_pin.flag = 1;
- cp->main.xlx[0].iopins.done_pin.port = FPGA_MAIN_DONE_PORT;
- cp->main.xlx[0].iopins.done_pin.pin = FPGA_MAIN_DONE_PIN;
- cp->main.xlx[0].iopins.done_pin.flag = 1;
-#ifdef FPGA_MAIN_ENABLE_PORT
- cp->main.xlx[0].iopins.enable_pin.port = FPGA_MAIN_ENABLE_PORT;
- cp->main.xlx[0].iopins.enable_pin.pin = FPGA_MAIN_ENABLE_PIN;
- cp->main.xlx[0].iopins.enable_pin.flag = 1;
-#endif
-
- cp->main.xlx[0].irq = FPGA_MAIN_IRQ;
- }
-
- /* set up mezzanine board config info */
-
- rc = hymod_eeprom_read (1, &cp->mezz.eeprom);
-
- puts ("EEPROM:mezz...");
- if (rc < 0)
- puts ("NOT PRESENT\n");
- else if (rc == 0)
- puts ("INVALID\n");
- else {
- cp->main.eeprom.valid = 1;
-
- printf ("OK (ver %u)\n", cp->mezz.eeprom.ver);
- hymod_eeprom_print (&cp->mezz.eeprom);
- }
-
- cp->crc = crc32 (0, (unsigned char *)cp, offsetof (hymod_conf_t, crc));
-
- hymod_check_env ();
-
- return (0);
-}
-
-#ifdef CONFIG_SHOW_ACTIVITY
-void board_show_activity (ulong timebase)
-{
-#ifdef CONFIG_SYS_HYMOD_DBLEDS
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8260_t *iop = &immr->im_ioport;
- static int shift = 0;
-
- if ((timestamp % CONFIG_SYS_HZ) == 0) {
- if (++shift > 3)
- shift = 0;
- iop->iop_pdatd =
- (iop->iop_pdatd & ~0x0f000000) | (1 << (24 + shift));
- }
-#endif /* CONFIG_SYS_HYMOD_DBLEDS */
-}
-
-void show_activity(int arg)
-{
-}
-#endif /* CONFIG_SHOW_ACTIVITY */
diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h
deleted file mode 100644
index 7024d8a..0000000
--- a/board/hymod/hymod.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _HYMOD_H_
-#define _HYMOD_H_
-
-#ifdef CONFIG_MPC8260
-#include <asm/iopin_8260.h>
-#endif
-
-/*
- * hymod configuration data - passed by boot code via the board information
- * structure (only U-Boot has support for this at the moment)
- *
- * there are three types of data passed up from the boot monitor. the first
- * (type hymod_eeprom_t) is the eeprom data that was read off both the main
- * (or mother) board and the mezzanine board (if any). this data defines how
- * many Xilinx fpgas are on each board, and their types (among other things).
- * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where
- * in the physical address space the various Xilinx fpga access regions have
- * been mapped by the boot rom. the third type of data (type xlx_iopins_t,
- * one per Xilinx fpga) defines which io port pins are connected to the various
- * signals required to program a Xilinx fpga.
- *
- * A ram/flash "bank" refers to memory controlled by the same chip select.
- *
- * the eeprom contents are defined as in technical note #2 - basically,
- * a header, zero or more records in no particular order, and a 32 bit crc
- * a record is 1 or more type bytes, a length byte and "length" bytes.
- */
-
-#define HYMOD_EEPROM_ID 0xAA /* eeprom id byte */
-#define HYMOD_EEPROM_VER 1 /* eeprom contents version (0-127) */
-#define HYMOD_EEPROM_SIZE 256 /* number of bytes in the eeprom */
-
-/* eeprom header */
-typedef
- struct {
- unsigned char id; /* eeprom id byte */
- unsigned char :1;
- unsigned char ver:7; /* eeprom contents version number */
- unsigned long len; /* total # of bytes btw hdr and crc */
- }
-hymod_eehdr_t;
-
-/* maximum number of bytes available for eeprom data records */
-#define HYMOD_EEPROM_MAXLEN (HYMOD_EEPROM_SIZE \
- - sizeof (hymod_eehdr_t) \
- - sizeof (unsigned long))
-
-/* eeprom data record */
-typedef
- union {
- struct {
- unsigned char topbit:1;
- unsigned char type:7;
- unsigned char len;
- unsigned char data[1]; /* variable length */
- } small;
- struct {
- unsigned short topbit:1;
- unsigned short nxtbit:1;
- unsigned short type:14;
- unsigned short len;
- unsigned char data[1]; /* variable length */
- } medium;
- struct {
- unsigned long topbit:1;
- unsigned long nxtbit:1;
- unsigned long type:30;
- unsigned long len;
- unsigned char data[1]; /* variable length */
- } large;
- }
-hymod_eerec_t;
-
-#define HYMOD_EEOFF_MAIN 0x00 /* i2c addr offset for main eeprom */
-#define HYMOD_EEOFF_MEZZ 0x04 /* i2c addr offset for mezz eepomr */
-
-/* eeprom record types */
-#define HYMOD_EEREC_SERNO 1 /* serial number */
-#define HYMOD_EEREC_DATE 2 /* date */
-#define HYMOD_EEREC_BATCH 3 /* batch id */
-#define HYMOD_EEREC_TYPE 4 /* board type */
-#define HYMOD_EEREC_REV 5 /* revision number */
-#define HYMOD_EEREC_SDRAM 6 /* sdram sizes */
-#define HYMOD_EEREC_FLASH 7 /* flash sizes */
-#define HYMOD_EEREC_ZBT 8 /* zbt ram sizes */
-#define HYMOD_EEREC_XLXTYP 9 /* Xilinx fpga types */
-#define HYMOD_EEREC_XLXSPD 10 /* Xilinx fpga speeds */
-#define HYMOD_EEREC_XLXTMP 11 /* Xilinx fpga temperatures */
-#define HYMOD_EEREC_XLXGRD 12 /* Xilinx fpga grades */
-#define HYMOD_EEREC_CPUTYP 13 /* Motorola CPU type */
-#define HYMOD_EEREC_CPUSPD 14 /* CPU speed */
-#define HYMOD_EEREC_BUSSPD 15 /* bus speed */
-#define HYMOD_EEREC_CPMSPD 16 /* CPM speed */
-#define HYMOD_EEREC_HSTYPE 17 /* high-speed serial chip type */
-#define HYMOD_EEREC_HSCHIN 18 /* high-speed serial input channels */
-#define HYMOD_EEREC_HSCHOUT 19 /* high-speed serial output channels */
-
-/* some dimensions */
-#define HYMOD_MAX_BATCH 32 /* max no. of bytes in batch id */
-#define HYMOD_MAX_SDRAM 4 /* max sdram "banks" on any board */
-#define HYMOD_MAX_FLASH 4 /* max flash "banks" on any board */
-#define HYMOD_MAX_ZBT 16 /* max ZBT rams on any board */
-#define HYMOD_MAX_XLX 4 /* max Xilinx fpgas on any board */
-
-#define HYMOD_MAX_BYTES 16 /* enough to store any bytes array */
-
-/* board types */
-#define HYMOD_BDTYPE_NONE 0 /* information not present */
-#define HYMOD_BDTYPE_IO 1 /* I/O main board */
-#define HYMOD_BDTYPE_CLP 2 /* CLP main board */
-#define HYMOD_BDTYPE_DSP 3 /* DSP main board */
-#define HYMOD_BDTYPE_INPUT 4 /* video input mezzanine board */
-#define HYMOD_BDTYPE_ALTINPUT 5 /* video input mezzanine board */
-#define HYMOD_BDTYPE_DISPLAY 6 /* video display mezzanine board */
-#define HYMOD_BDTYPE_MAX 7 /* first invalid value */
-
-/* Xilinx fpga types */
-#define HYMOD_XTYP_NONE 0 /* information not present */
-#define HYMOD_XTYP_XCV300E 1 /* Xilinx Virtex 300 */
-#define HYMOD_XTYP_XCV400E 2 /* Xilinx Virtex 400 */
-#define HYMOD_XTYP_XCV600E 3 /* Xilinx Virtex 600 */
-#define HYMOD_XTYP_MAX 4 /* first invalid value */
-
-/* Xilinx fpga speeds */
-#define HYMOD_XSPD_NONE 0 /* information not present */
-#define HYMOD_XSPD_SIX 1
-#define HYMOD_XSPD_SEVEN 2
-#define HYMOD_XSPD_EIGHT 3
-#define HYMOD_XSPD_MAX 4 /* first invalid value */
-
-/* Xilinx fpga temperatures */
-#define HYMOD_XTMP_NONE 0 /* information not present */
-#define HYMOD_XTMP_COM 1
-#define HYMOD_XTMP_IND 2
-#define HYMOD_XTMP_MAX 3 /* first invalid value */
-
-/* Xilinx fpga grades */
-#define HYMOD_XTMP_NONE 0 /* information not present */
-#define HYMOD_XTMP_NORMAL 1
-#define HYMOD_XTMP_ENGSAMP 2
-#define HYMOD_XTMP_MAX 3 /* first invalid value */
-
-/* CPU types */
-#define HYMOD_CPUTYPE_NONE 0 /* information not present */
-#define HYMOD_CPUTYPE_MPC8260 1 /* Motorola MPC8260 embedded powerpc */
-#define HYMOD_CPUTYPE_MAX 2 /* first invalid value */
-
-/* CPU/BUS/CPM clock speeds */
-#define HYMOD_CLKSPD_NONE 0 /* information not present */
-#define HYMOD_CLKSPD_33MHZ 1
-#define HYMOD_CLKSPD_66MHZ 2
-#define HYMOD_CLKSPD_100MHZ 3
-#define HYMOD_CLKSPD_133MHZ 4
-#define HYMOD_CLKSPD_166MHZ 5
-#define HYMOD_CLKSPD_200MHZ 6
-#define HYMOD_CLKSPD_MAX 7 /* first invalid value */
-
-/* high speed serial chip types */
-#define HYMOD_HSSTYPE_NONE 0 /* information not present */
-#define HYMOD_HSSTYPE_AMCC52064 1
-#define HYMOD_HSSTYPE_MAX 2 /* first invalid value */
-
-/* a date (yyyy-mm-dd) */
-typedef
- struct {
- unsigned short year;
- unsigned char month;
- unsigned char day;
- }
-hymod_date_t;
-
-/* describes a Xilinx fpga */
-typedef
- struct {
- unsigned char type; /* chip type */
- unsigned char speed; /* chip speed rating */
- unsigned char temp; /* chip temperature rating */
- unsigned char grade; /* chip grade */
- }
-hymod_xlx_t;
-
-/* describes a Motorola embedded processor */
-typedef
- struct {
- unsigned char type; /* CPU type */
- unsigned char cpuspd; /* speed of the PowerPC core */
- unsigned char busspd; /* speed of the system and 60x bus */
- unsigned char cpmspd; /* speed of the CPM co-processor */
- }
-hymod_mpc_t;
-
-/* info about high-speed (1Gbit) serial interface */
-typedef
- struct {
- unsigned char type; /* high-speed serial chip type */
- unsigned char nchin; /* number of input channels mounted */
- unsigned char nchout; /* number of output channels mounted */
- }
-hymod_hss_t;
-
-/*
- * this defines the contents of the serial eeprom that exists on every
- * hymod board, including mezzanine boards (the serial eeprom will be
- * faked for early development boards that don't have one)
- */
-
-typedef
- struct {
- unsigned char valid:1; /* contents of this struct is valid */
- unsigned char ver:7; /* eeprom contents version */
- unsigned char bdtype; /* board type */
- unsigned char bdrev; /* board revision */
- unsigned char batchlen; /* length of batch string below */
- unsigned long serno; /* serial number */
- hymod_date_t date; /* manufacture date */
- unsigned char batch[32]; /* manufacturer specific batch id */
- unsigned char nsdram; /* # of ram "banks" */
- unsigned char nflash; /* # of flash "banks" */
- unsigned char nzbt; /* # of ZBT rams */
- unsigned char nxlx; /* # of Xilinx fpgas */
- unsigned char sdramsz[HYMOD_MAX_SDRAM]; /* log2 of sdram size */
- unsigned char flashsz[HYMOD_MAX_FLASH]; /* log2 of flash size */
- unsigned char zbtsz[HYMOD_MAX_ZBT]; /* log2 of ZBT ram size */
- hymod_xlx_t xlx[HYMOD_MAX_XLX]; /* Xilinx fpga info */
- hymod_mpc_t mpc; /* Motorola MPC CPU info */
- hymod_hss_t hss; /* high-speed serial info */
- }
-hymod_eeprom_t;
-
-/*
- * this defines a region in the processor's physical address space
- */
-typedef
- struct {
- unsigned long exists:1; /* 1 if the region exists, 0 if not */
- unsigned long size:31; /* size in bytes */
- unsigned long base; /* base address */
- }
-xlx_prgn_t;
-
-/*
- * this defines where the various Xilinx fpga access regions are mapped
- * into the physical address space of the processor
- */
-typedef
- struct {
- xlx_prgn_t prog; /* program access region */
- xlx_prgn_t reg; /* register access region */
- xlx_prgn_t port; /* port access region */
- }
-xlx_mmap_t;
-
-/*
- * this defines which 8260 i/o port pins are connected to the various
- * signals required for programming a Xilinx fpga
- */
-typedef
- struct {
- iopin_t prog_pin; /* assert for >= 300ns to program */
- iopin_t init_pin; /* goes high when fpga is cleared */
- iopin_t done_pin; /* goes high when program is done */
- iopin_t enable_pin; /* some fpgas need enabling */
- }
-xlx_iopins_t;
-
-/* all info about one Xilinx chip */
-typedef
- struct {
- xlx_mmap_t mmap;
- xlx_iopins_t iopins;
- unsigned long irq:8; /* h/w intr req number for this fpga */
- }
-xlx_info_t;
-
-/* all info about one hymod board */
-typedef
- struct {
- hymod_eeprom_t eeprom;
- xlx_info_t xlx[HYMOD_MAX_XLX];
- }
-hymod_board_t;
-
-/*
- * this defines the configuration information of a hymod board-set
- * (main board + possible mezzanine board). In future, there may be
- * more than one mezzanine board (stackable?) - if so, add a "mezz2"
- * field, and so on... or make mezz an array?
- */
-typedef
- struct {
- unsigned long ver:8; /* version control */
- hymod_board_t main; /* main board info */
- hymod_board_t mezz; /* mezzanine board info */
- unsigned long crc; /* ensures kernel and boot prom agree */
- }
-hymod_conf_t;
-
-#endif /* _HYMOD_H_ */
diff --git a/board/hymod/input.c b/board/hymod/input.c
deleted file mode 100644
index a9035d3..0000000
--- a/board/hymod/input.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2003
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <bootretry.h>
-#include <cli.h>
-
-int
-hymod_get_serno (const char *prompt)
-{
- for (;;) {
- int n, serno;
- char *p;
-
- bootretry_reset_cmd_timeout();
-
- n = cli_readline(prompt);
-
- if (n < 0)
- return (n);
-
- if (n == 0)
- continue;
-
- serno = (int) simple_strtol (console_buffer, &p, 10);
-
- if (p > console_buffer && *p == '\0' && serno > 0)
- return (serno);
-
- printf ("Invalid number (%s) - please re-enter\n",
- console_buffer);
- }
-}
-
-int
-hymod_get_ethaddr (void)
-{
- for (;;) {
- int n;
-
- bootretry_reset_cmd_timeout();
-
- n = cli_readline("Enter board ethernet address: ");
-
- if (n < 0)
- return (n);
-
- if (n == 0)
- continue;
-
- if (n == 17) {
- int i;
- char *p, *q;
-
- /* see if it looks like an ethernet address */
-
- p = console_buffer;
-
- for (i = 0; i < 6; i++) {
- char term = (i == 5 ? '\0' : ':');
-
- (void)simple_strtol (p, &q, 16);
-
- if ((q - p) != 2 || *q++ != term)
- break;
-
- p = q;
- }
-
- if (i == 6) {
- /* it looks ok - set it */
- printf ("Setting ethernet addr to %s\n",
- console_buffer);
-
- setenv ("ethaddr", console_buffer);
-
- puts ("Remember to do a 'saveenv' to "
- "make it permanent\n");
-
- return (0);
- }
- }
-
- printf ("Invalid ethernet addr (%s) - please re-enter\n",
- console_buffer);
- }
-}
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
deleted file mode 100644
index 1dfd2b2..0000000
--- a/board/hymod/u-boot.lds
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8260/start.o (.text)
-/*
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- . = env_offset;
-*/
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- . = ALIGN(256 * 1024);
- .ppcenv :
- {
- common/env_embedded.o (.ppcenv)
- }
- . = ALIGN(4);
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
deleted file mode 100644
index b9c84c7..0000000
--- a/board/hymod/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/configs/hymod_defconfig b/configs/hymod_defconfig
deleted file mode 100644
index a6dc1d8..0000000
--- a/configs/hymod_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_HYMOD=y
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 62cb1ea..aef39d7 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -79,9 +79,6 @@ typedef struct bd_info {
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
#ifdef CONFIG_HAS_ETH1
unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
diff --git a/include/common.h b/include/common.h
index d5020c8..c96b58e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -69,9 +69,6 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
-#ifdef CONFIG_HYMOD
-#include <board/hymod/hymod.h>
-#endif
#ifdef CONFIG_ARM
#define asmlinkage /* nothing */
#endif
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
deleted file mode 100644
index c973365..0000000
--- a/include/configs/hymod.h
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Config header file for Hymod board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_HYMOD 1 /* ...on a Hymod board */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-
-#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which channel for ether */
-#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#if (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK10
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */
-# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */
-
-#elif (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */
-# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */
-
-#elif (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */
-# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-
-#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK)
-#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK)
-#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \
- else iop->pdat &= ~MDIO_DATA_PINMASK
-
-#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \
- else iop->pdat &= ~MDIO_CLCK_PINMASK
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-
-/* other options */
-#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */
-#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifdef DEBUG
-#define CONFIG_8260_CLKIN 33333333 /* in Hz */
-#else
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE 115200
-#else
-#define CONFIG_BAUDRATE 9600
-#endif
-
-/* default ip addresses - these will be overridden */
-#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */
-#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */
-
-#define CONFIG_LAST_STAGE_INIT
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_XIMG
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */
-#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */
-/* Be selective on what keys can delay or stop the autoboot process
- * To stop use: " "
- */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
- "press <SPACE> to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define DEBUG_BOOTKEYS 0
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
-#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
-#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-# if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-# else
-#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
-# endif
-#endif
-
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
-
-/*
- * Hymod specific configurable options
- */
-#undef CONFIG_SYS_HYMOD_DBLEDS /* walk mezz board LEDs */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0x7e
-
-/* these are for the ST M24C02 2kbit serial i2c eeprom */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */
-
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */
-
-/*
- * standard dtt sensor configuration - bottom bit will determine local or
- * remote sensor of the ADM1021, the rest determines index into
- * CONFIG_SYS_DTT_ADM1021 array below.
- *
- * On HYMOD board, the remote sensor should be connected to the MPC8260
- * temperature diode thingy, but an errata said this didn't work and
- * should be disabled - so it isn't connected.
- */
-#if 0
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#else
-#define CONFIG_DTT_SENSORS { 0 }
-#endif
-
-/*
- * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
- * there will be one entry in this array for each two (dummy) sensors in
- * CONFIG_DTT_SENSORS.
- *
- * For HYMOD board:
- * - only one ADM1021
- * - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
- * - conversion rate 0x02 = 0.25 conversions/second
- * - ALERT ouput disabled
- * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
- * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
- */
-#define CONFIG_SYS_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#ifdef DEBUG
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
- HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
- HRCW_MODCK_H0010)
-#else
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
- HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
- HRCW_MODCK_H0101)
-#endif
-/* no slaves so just duplicate the master hrcw */
-#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_FPGA_BASE 0x80000000
-/*
- * unfortunately, CONFIG_SYS_MONITOR_LEN must include the
- * (very large i.e. 256kB) environment flash sector
- */
-#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#ifdef DEBUG
-#define CONFIG_SYS_HID0_FINAL 0
-#else
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
-#endif
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#ifdef DEBUG
-#define CONFIG_SYS_RMR 0
-#else
-#define CONFIG_SYS_RMR RMR_CSRE
-#endif
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR (BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\
- SIUMCR_APPC10|SIUMCR_MMR11)
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR (SCCR_DFBRG01)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 32 bit FLASH
- * 1 60x GPCM 32 bit FLASH (same as 0 - unused for now)
- * 2 60x SDRAM 64 bit SDRAM
- * 3 Local UPMC 8 bit Main Xilinx configuration
- * 4 Local GPCM 32 bit Main Xilinx register mode
- * 5 Local UPMB 32 bit Main Xilinx port mode
- * 6 Local UPMC 8 bit Mezz Xilinx configuration
- */
-
-/*
- * Bank 0 - FLASH
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The flash memory is two Intel StrataFlash chips, each configured for
- * 16 bit operation and connected to give a 32 bit wide port."
- *
- * "The chip select logic is configured to respond to both *CS0 and *CS1.
- * Therefore the FLASH memory will be mapped to both bank 0 and bank 1.
- * It is suggested that bank 0 be read-only and bank 1 be read/write. The
- * FLASH will then appear as ROM during boot."
- *
- * Initially, we are only going to use bank 0 in read/write mode.
- */
-
-/* 32 bit, read-write, GPCM on 60x bus */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\
- BRx_PS_32|BRx_MS_GPCM_P|BRx_V)
-/* up to 32 Mb */
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
-
-/*
- * Bank 2 - SDRAM
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a
- * fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous
- * dynamic random access memory organised as 4 banks by 4096 rows by 512
- * columns by 16 bits. Four chips provide a 64-bit port on the 60x bus."
- *
- * "The locations in SDRAM are accessed using multiplexed address pins to
- * specify row and column. The pins also act to specify commands. The state
- * of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP
- * pin may function as a row address or as the AUTO PRECHARGE control line,
- * depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260
- * address lines to be configured to the required multiplexing scheme."
- */
-
-#define CONFIG_SYS_SDRAM_SIZE 64
-
-/* 64 bit, read-write, SDRAM on 60x bus */
-#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\
- BRx_PS_64|BRx_MS_SDRAM_P|BRx_V)
-/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */
-#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\
- ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12)
-
-/*
- * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows:
- *
- * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5
- * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16
- * as bank select, A7 is output on SDA10 during an ACTIVATE command,
- * earliest timing for ACTIVATE command after REFRESH command is 6 clocks,
- * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE
- * command is 2 clocks, earliest timing for PRECHARGE after last data
- * was read is 1 clock, earliest timing for PRECHARGE after last data
- * was written is 1 clock, CAS Latency is 2.
- */
-
-#define CONFIG_SYS_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
- PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\
- PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\
- PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\
- PSDMR_WRC_1C|PSDMR_CL_2)
-
-/*
- * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh
- * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register
- * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer
- * Prescaler, hence the P instead of the R). The refresh timer period is given
- * by (note that there was a change in the 8260 UM Errata):
- *
- * TimerPeriod = (PSRT + 1) / Fmptc
- *
- * where Fmptc is the BusClock divided by PTP. i.e.
- *
- * TimerPeriod = (PSRT + 1) / (BusClock / PTP)
- *
- * or
- *
- * TImerPeriod = (PTP * (PSRT + 1)) / BusClock
- *
- * The requirement for the Toshiba TC59SM716FTL-10 is that there must be
- * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096
- * = 15.625 usecs.
- *
- * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32
- * appear to be reasonable.
- */
-
-#ifdef DEBUG
-#define CONFIG_SYS_PSRT 39
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8
-#else
-#define CONFIG_SYS_PSRT 31
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32
-#endif
-
-/*
- * Banks 3,4,5 and 6 - FPGA access
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made
- * for configuring an optional FPGA on the mezzanine interface.
- *
- * Access to the FPGAs may be divided into several catagories:
- *
- * 1. Configuration
- * 2. Register mode access
- * 3. Port mode access
- *
- * The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be
- * configured only (mode 1). Consequently there are four access types.
- *
- * To improve interface performance and simplify software design, the four
- * possible access types are separately mapped to different memory banks.
- *
- * All are accessed using the local bus."
- *
- * Device Mode Memory Bank Machine Port Size Access
- *
- * Main Configuration 3 UPMC 8bit R/W
- * Main Register 4 GPCM 32bit R/W
- * Main Port 5 UPMB 32bit R/W
- * Mezzanine Configuration 6 UPMC 8bit W/O
- *
- * "Note that mezzanine mode 1 access is write-only."
- */
-
-/* all the bank sizes must be a power of two, greater or equal to 32768 */
-#define FPGA_MAIN_CFG_BASE (CONFIG_SYS_FPGA_BASE)
-#define FPGA_MAIN_CFG_SIZE 32768
-#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE)
-#define FPGA_MAIN_REG_SIZE 32768
-#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE)
-#define FPGA_MAIN_PORT_SIZE 32768
-#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE)
-#define FPGA_MEZZ_CFG_SIZE 32768
-
-/* 8 bit, read-write, UPMC */
-#define CONFIG_SYS_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
-
-/* 32 bit, read-write, GPCM */
-#define CONFIG_SYS_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
-/* up to 32Kbyte */
-#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
-
-/* 32 bit, read-write, UPMB */
-#define CONFIG_SYS_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
-/* up to 32Kbyte */
-#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
-
-/* 8 bit, write-only, UPMC */
-#define CONFIG_SYS_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
-
-/*-----------------------------------------------------------------------
- * MBMR - Machine B Mode 10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */
-
-/*-----------------------------------------------------------------------
- * MCMR - Machine C Mode 10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */
-
-/*
- * FPGA I/O Port/Bit information
- */
-
-#define FPGA_MAIN_PROG_PORT IOPIN_PORTA
-#define FPGA_MAIN_PROG_PIN 4 /* PA4 */
-#define FPGA_MAIN_INIT_PORT IOPIN_PORTA
-#define FPGA_MAIN_INIT_PIN 5 /* PA5 */
-#define FPGA_MAIN_DONE_PORT IOPIN_PORTA
-#define FPGA_MAIN_DONE_PIN 6 /* PA6 */
-
-#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA
-#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */
-#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA
-#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */
-#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA
-#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */
-#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA
-#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */
-
-/*
- * FPGA Interrupt configuration
- */
-#define FPGA_MAIN_IRQ SIU_INT_IRQ2
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/tools/bddb/README b/tools/bddb/README
deleted file mode 100644
index 9bee59a..0000000
--- a/tools/bddb/README
+++ /dev/null
@@ -1,116 +0,0 @@
-Hymod Board Database
-
-(C) Copyright 2001
-Murray Jensen <Murray.Jensen@csiro.au>
-CSIRO Manufacturing Science and Technology, Preston Lab
-
-25-Jun-01
-
-This stuff is a set of PHP/MySQL scripts to implement a custom board
-database. It will need *extensive* hacking to modify it to keep the
-information about your custom boards that you want, however it is a good
-starting point.
-
-How it is used:
-
- 1. a board has gone through all the hardware testing etc and is
- ready to have the flash programmed for the first time - first you
- go to a web page and fill in information about the board in a form
- to register it in a database
-
- 2. the web stuff allocates a (unique) serial number and (optionally)
- a (locally administered) ethernet address and stores the information
- in a database using the serial number as the key (can do whole
- batches of boards in one go and/or use a previously registered board
- as defaults for the new board(s))
-
- 3. it then creates a file in the tftp area of a server somewhere
- containing the board information in a simple text format (one
- per serial number)
-
- 4. all hymod boards have an i2c eeprom, and when U-Boot sees that
- the eeprom is unitialised, it prompts for a serial number and
- ethernet address (if not set), then transfers the file created
- in step 3 from the server and initialises the eeprom from its
- contents
-
-What this means is you can't boot the board until you have allocated a serial
-number, but you don't have to type it all twice - you do it once on the web
-and the board then finds the info it needs to initialise its eeprom. The
-other side of the coin is the reading of the eeprom and how it gets passed
-to Linux (or another O/S).
-
-To see how this is all done for the hymod boards look at the code in the
-"board/hymod" directory and in the file "include/asm/hymod.h". Hymod boards
-can have a mezzanine card which also have an eeprom that needs allocating,
-the same process is used for these as well - just a different i2c address.
-
-Other forms provide the following functions:
-
- - browsing the board database
- - editing board information (one at a time)
- - maintaining/browsing a (simple) per board event log
-
-You will need: MySQL (I use version 3.23.7-alpha), PHP4 (with MySQL
-support enabled) and a web server (I use Apache 1.3.x).
-
-I originally started by using phpMyBuilder (http://kyber.dk/phpMyBuilder)
-but it soon got far more complicated than that could handle (but I left
-the copyright messages in there anyway). Most of the code resides in the
-common defs.php file, which shouldn't need much alteration - all the work
-will be in shaping the front-end php files to your liking.
-
-Here's a quick summary of what needs doing to use it for your boards:
-
-1. get phpMyAdmin (http://phpwizard.net/projects/phpMyAdmin/) - it's an
- invaluable tool for this sort of stuff (this step is optional of course)
-
-2. edit "bddb.css" to your taste, if you could be bothered - I have no
- idea what is in there or what it does - I copied it from somewhere else
- ("user.css" from the phpMyEdit (http://phpmyedit.sourcerforge.net) package,
- I think) - I figure one day I'll see what sort of things I can change
- in there.
-
-3. create a mysql database - call it whatever you like
-
-4. edit "create_tables.sql" and modify the "boards" table schema to
- reflect the information you want to keep about your boards. It may or
- may not be easier to do this and the next step in phpMyAdmin. Check out
- the MySQL documentation at http://www.mysql.com/doc/ in particular the
- column types at http://www.mysql.com/doc/C/o/Column_types.html - Note
- there is only support for a few data types:
-
- int - presented as an html text input
- char/text - presented as an html text input
- date - presented as an html text input
- enum - presented as an html radio input
-
- I also have what I call "enum_multi" which is a set of enums with the
- same name, but suffixed with a number e.g. fred0, fred1, fred2. These
- are presented as a number of html select's with a single label "fred"
- this is useful for board characteristics that have multiple items of
- the same type e.g. multiple banks of sdram.
-
-5. use the "create_tables.sql" file to create the "boards" table in the
- database e.g. mysql dbname < create_tables.sql
-
-6. create a user and password for the web server to log into the MySQL
- database with; give this user select, insert and update privileges
- to the database created in 3 (and delete, if you want the "delete"
- functions in the edit forms to work- I have this turned off). phpMyAdmin
- helps in this step.
-
-7. edit "config.php" and set the variables: $mysql_user, $mysql_pw, $mysql_db,
- $bddb_cfgdir and $bddb_label - keep the contents of this file secret - it
- contains the web servers username and password (the three $mysql_* vars
- are set from the previous step)
-
-8. edit "defs.php" and a. adjust the various enum value arrays and b. edit
- the function "pg_foot()" to remove my email address :-)
-
-9. do major hacking on the following files: browse.php, doedit.php, donew.php,
- edit.php and new.php to reflect your database schema - fortunately the
- hacking is fairly straight-forward, but it is boring and time-consuming.
-
-These notes were written rather hastily - if you find any obvious problems
-please let me know.
diff --git a/tools/bddb/badsubmit.php b/tools/bddb/badsubmit.php
deleted file mode 100644
index 5092a31..0000000
--- a/tools/bddb/badsubmit.php
+++ /dev/null
@@ -1,23 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- require("defs.php");
- pg_head("$bddb_label - Unknown Submit Type");
-?>
-<center>
- <font size="+4">
- <b>
- The <?php echo "$bddb_label"; ?> form was submitted with an
- unknown SUBMIT type <?php echo "(value was '$submit')" ?>.
- <br></br>
- Perhaps you typed the URL in directly? Click here to go to the
- home page of the <a href="index.php"><?php echo "$bddb_label"; ?></a>.
- </b>
- </font>
-</center>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/bddb.css b/tools/bddb/bddb.css
deleted file mode 100644
index dee2b2e..0000000
--- a/tools/bddb/bddb.css
+++ /dev/null
@@ -1,207 +0,0 @@
-BODY {
- background: #e0ffff;
- color: #000000;
- font-family: Arial, Verdana, Helvetica;
-}
-H1 {
- font-family: "Copperplate Gothic Bold";
- background: transparent;
- color: #993300;
- text-align: center;
-}
-H2, H3, H4, H5 {
- background: transparent;
- color: #993300;
- margin-top: 4%;
- text-align: center;
-}
-Body.Plain Div.Abstract, Body.Plain P.Abstract {
- background: #cccc99;
- color: #333300;
- border: white;
- padding: 3%;
- font-family: Times, Verdana;
-}
-TH.Nav {
- background: #0000cc;
- color: #ff9900;
-}
-TH.Menu {
- background: #3366cc;
- color: #ff9900;
-}
-A:hover {
- color: #ff6600;
-}
-A.Menu:hover {
- color: #ff6600;
-}
-A.HoMe:hover {
- color: #ff6600;
-}
-A.Menu {
- background: transparent;
- color: #ffcc33;
- font-family: Verdana, Helvetica, Arial;
- font-size: smaller;
- text-decoration: none;
-}
-A.Menu:visited {
- background: transparent;
- color: #ffcc99;
-}
-A.HoMe {
- background: transparent;
- color: #ffcc33;
- font-family: Verdana, Helvetica, Arial;
- text-decoration:none;
-}
-A.HoMe:visited {
- background: transparent;
- color: #ffcc99;
-}
-TH.Xmp {
- background: #eeeeee;
- color: #330066;
- font-family: courier;
- font-weight: normal;
-}
-TH.LuT {
- background: #cccccc;
- color: #000000;
-}
-TD.LuT {
- background: #ffffcc;
- color: #000000;
- font-size: 85%;
-}
-TH.Info, TD.Info {
- background: #ffffcc;
- color: #660000;
- font-family: "Comic Sans MS", Cursive, Verdana;
- font-size: smaller;
-}
-Div.Info, P.Info {
- background: #ffff99;
- color: #990033;
- text-align: left;
- padding: 2%;
- font-family: "Comic Sans MS", Cursive, Verdana;
- font-size: 85%;
- }
-Div.Info A {
- background: transparent;
- color: #ff6600;
-}
-.HL {
- background: #ffff99;
- color: #000000;
-}
-TD.HL {
- background: #ccffff;
- color: #000000;
-}
-Div.Margins {
- width: 512px;
- text-align: center;
-}
-TD.Plain {
- background: #ffffcc;
- color: #000033;
-}
-.Type {
- background: #cccccc;
- color: #660000;
-}
-.Name {
- background: #eeeeee;
- color: #660000;
- vertical-align: top;
- text-align: right;
-}
-.Value {
- background: #ffffee;
- color: #000066;
-}
-.Drop {
- background: #333366;
- color: #ffcc33;
- font-family: "Copperplate Gothic Light", Helvetica, Verdana, Arial;
-}
-A.Button:hover {
- color: #ff6600;
-}
-A.Button {
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
-}
-.Button {
- font-size: 9pt;
- text-align: center;
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
- margin-bottom: 2pt;
- border-top: 2px solid #ffff99;
- border-left: 2px solid #ffff99;
- border-right: 2px solid #cc9933;
- border-bottom: 2px solid #cc9933;
- font-family: Verdana, Arial, "Comic Sans MS";
-}
-.Banner {
- width: 468;
- font-size: 12pt;
- text-align: center;
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
- border-top: 4px solid #ffff99;
- border-left: 4px solid #ffff99;
- border-right: 4px solid #cc9933;
- border-bottom: 4px solid #cc9933;
- font-family: Verdana, Arial, "Comic Sans MS";
-}
-TD.Nova, Body.Nova {
- background: #000000;
- font-family: "Times New Roman";
- font-weight: light;
- color: #ffcc00;
-}
-Body.Nova A.Button {
- background: gold;
- color: #003366;
-}
-Body.Nova A.Banner {
- background: transparent;
- color: #003366;
-}
-Body.Nova A {
- background: transparent;
- text-decoration:none;
- color: #ffd766;
-}
-Body.Nova H1, Body.Nova H2, Body.Nova H3, Body.Nova H4 {
- background: transparent;
- color: white;
- margin-top: 4%;
- text-align: center;
- filter: Blur(Add=1, Direction=0, Strength=8);
-}
-Body.Nova Div.Abstract {
- background: #000000;
- color: #ffffff;
- font-family: Times, Verdana;
-}
-Body.Nova A.Abstract {
- background: transparent;
- color: #ffeedd;
-}
-Body.Nova TH.LuT {
- background: black;
- color: #ffff99;
-}
-Body.Nova TD.LuT {
- background: navy;
- color: #ffff99;
-}
diff --git a/tools/bddb/brlog.php b/tools/bddb/brlog.php
deleted file mode 100644
index fccfbd0..0000000
--- a/tools/bddb/brlog.php
+++ /dev/null
@@ -1,109 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // list page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Browse Board Log");
-
- $serno=intval($serno);
- if ($serno == 0)
- die("serial number not specified or invalid!");
-
- function print_cell($str) {
- if ($str == '')
- $str = ' ';
- echo "\t<td>$str</td>\n";
- }
-?>
-<table align=center border=1 cellpadding=10>
-<tr>
-<th>serno / edit</th>
-<th>ethaddr</th>
-<th>date</th>
-<th>batch</th>
-<th>type</th>
-<th>rev</th>
-<th>location</th>
-</tr>
-<?php
- $r=mysql_query("select * from boards where serno=$serno");
-
- while($row=mysql_fetch_array($r)){
- foreach ($columns as $key) {
- if (!key_in_array($key, $row))
- $row[$key] = '';
- }
-
- echo "<tr>\n";
- print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
- print_cell($row['ethaddr']);
- print_cell($row['date']);
- print_cell($row['batch']);
- print_cell($row['type']);
- print_cell($row['rev']);
- print_cell($row['location']);
- echo "</tr>\n";
- }
-
- mysql_free_result($r);
-?>
-</table>
-<hr></hr>
-<p></p>
-<?php
- $limit=abs(isset($_REQUEST['limit'])?$_REQUEST['limit']:20);
- $offset=abs(isset($_REQUEST['offset'])?$_REQUEST['offset']:0);
- $lr=mysql_query("select count(*) as n from log where serno=$serno");
- $lrow=mysql_fetch_array($lr);
- if($lrow['n']>$limit){
- $preoffset=max(0,$offset-$limit);
- $postoffset=$offset+$limit;
- echo "<table width=\"100%\">\n<tr align=center>\n";
- printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
- printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
- echo "</tr>\n</table>\n";
- }
- mysql_free_result($lr);
-?>
-<table width="100%" border=1 cellpadding=10>
-<tr valign=top>
-<th>logno / edit</th>
-<th>date</th>
-<th>who</th>
-<th width="70%">details</th>
-</tr>
-<?php
- $r=mysql_query("select * from log where serno=$serno order by logno limit $offset,$limit");
-
- while($row=mysql_fetch_array($r)){
- echo "<tr>\n";
- print_cell("<a href=\"edlog.php?serno=$row[serno]&logno=$row[logno]\">$row[logno]</a>");
- print_cell($row['date']);
- print_cell($row['who']);
- print_cell("<pre>" . urldecode($row['details']) . "</pre>");
- echo "</tr>\n";
- }
-
- mysql_free_result($r);
-?>
-</table>
-<hr></hr>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="newlog.php?serno=<?php echo "$serno"; ?>">Add to Log</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/browse.php b/tools/bddb/browse.php
deleted file mode 100644
index 675dfab..0000000
--- a/tools/bddb/browse.php
+++ /dev/null
@@ -1,147 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // list page (hymod_bddb / boards)
-
- require("defs.php");
-
- $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
-
- $verbose=isset($_REQUEST['verbose'])?intval($_REQUEST['verbose']):0;
-
- pg_head("$bddb_label - Browse database" . ($verbose?" (verbose)":""));
-?>
-<p></p>
-<?php
- $limit=isset($_REQUEST['limit'])?abs(intval($_REQUEST['limit'])):20;
- $offset=isset($_REQUEST['offset'])?abs(intval($_REQUEST['offset'])):0;
-
- if ($serno == '') {
-
- $lr=mysql_query("select count(*) as n from boards");
- $lrow=mysql_fetch_array($lr);
-
- if($lrow['n']>$limit){
- $preoffset=max(0,$offset-$limit);
- $postoffset=$offset+$limit;
- echo "<table width=\"100%\">\n<tr>\n";
- printf("<td align=left><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset, $verbose);
- printf("<td align=right><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset, $offset);
- echo "</tr>\n</table>\n";
- }
-
- mysql_free_result($lr);
- }
-?>
-<table align=center border=1 cellpadding=10>
-<tr>
-<th></th>
-<th>serno / edit</th>
-<th>ethaddr</th>
-<th>date</th>
-<th>batch</th>
-<th>type</th>
-<th>rev</th>
-<th>location</th>
-<?php
- if ($verbose) {
- echo "<th>comments</th>\n";
- echo "<th>sdram</th>\n";
- echo "<th>flash</th>\n";
- echo "<th>zbt</th>\n";
- echo "<th>xlxtyp</th>\n";
- echo "<th>xlxspd</th>\n";
- echo "<th>xlxtmp</th>\n";
- echo "<th>xlxgrd</th>\n";
- echo "<th>cputyp</th>\n";
- echo "<th>cpuspd</th>\n";
- echo "<th>cpmspd</th>\n";
- echo "<th>busspd</th>\n";
- echo "<th>hstype</th>\n";
- echo "<th>hschin</th>\n";
- echo "<th>hschout</th>\n";
- }
-?>
-</tr>
-<?php
- $query = "select * from boards";
- if ($serno != '') {
- $pre = " where ";
- foreach (preg_split("/[\s,]+/", $serno) as $s) {
- if (preg_match('/^[0-9]+$/',$s))
- $query .= $pre . "serno=" . $s;
- else if (preg_match('/^([0-9]+)-([0-9]+)$/',$s,$m)) {
- $m1 = intval($m[1]); $m2 = intval($m[2]);
- if ($m2 <= $m1)
- die("bad serial number range ($s)");
- $query .= $pre . "(serno>=$m[1] and serno<=$m[2])";
- }
- else
- die("illegal serial number ($s)");
- $pre = " or ";
- }
- }
- $query .= " order by serno";
- if ($serno == '')
- $query .= " limit $offset,$limit";
-
- $r = mysql_query($query);
-
- function print_cell($str) {
- if ($str == '')
- $str = ' ';
- echo "\t<td>$str</td>\n";
- }
-
- while($row=mysql_fetch_array($r)){
- foreach ($columns as $key) {
- if (!key_in_array($key, $row))
- $row[$key] = '';
- }
-
- echo "<tr>\n";
- print_cell("<a href=\"brlog.php?serno=$row[serno]\">Log</a>");
- print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
- print_cell($row['ethaddr']);
- print_cell($row['date']);
- print_cell($row['batch']);
- print_cell($row['type']);
- print_cell($row['rev']);
- print_cell($row['location']);
- if ($verbose) {
- print_cell("<pre>\n" . urldecode($row['comments']) .
- "\n\t</pre>");
- print_cell(gather_enum_multi_print("sdram", 4, $row));
- print_cell(gather_enum_multi_print("flash", 4, $row));
- print_cell(gather_enum_multi_print("zbt", 16, $row));
- print_cell(gather_enum_multi_print("xlxtyp", 4, $row));
- print_cell(gather_enum_multi_print("xlxspd", 4, $row));
- print_cell(gather_enum_multi_print("xlxtmp", 4, $row));
- print_cell(gather_enum_multi_print("xlxgrd", 4, $row));
- print_cell($row['cputyp']);
- print_cell($row['cpuspd']);
- print_cell($row['cpmspd']);
- print_cell($row['busspd']);
- print_cell($row['hstype']);
- print_cell($row['hschin']);
- print_cell($row['hschout']);
- }
- echo "</tr>\n";
- }
-?>
-</table>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center><?php
- printf("<a href=\"%s?submit=Browse&offset=%d&verbose=%d%s\">%s Listing</a>\n", $PHP_SELF, $offset, $verbose?0:1, $serno!=''?"&serno=$serno":'', $verbose?"Terse":"Verbose");
- ?></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/config.php b/tools/bddb/config.php
deleted file mode 100644
index 6725757..0000000
--- a/tools/bddb/config.php
+++ /dev/null
@@ -1,16 +0,0 @@
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // mysql database access info
- $mysql_user="fred";
- $mysql_pw="apassword";
- $mysql_db="mydbname";
-
- // where to put the eeprom config files
- $bddb_cfgdir = '/tftpboot/bddb';
-
- // what this database is called
- $bddb_label = 'Hymod Board Database';
-?>
diff --git a/tools/bddb/create_tables.sql b/tools/bddb/create_tables.sql
deleted file mode 100644
index a2a5788..0000000
--- a/tools/bddb/create_tables.sql
+++ /dev/null
@@ -1,90 +0,0 @@
-# phpMyAdmin MySQL-Dump
-# http://phpwizard.net/phpMyAdmin/
-#
-# Host: localhost Database : hymod_bddb
-
-# (C) Copyright 2001
-# Murray Jensen <Murray.Jensen@csiro.au>
-# CSIRO Manufacturing and Infrastructure Technology, Preston Lab
-
-# --------------------------------------------------------
-#
-# Table structure for table 'boards'
-#
-
-DROP TABLE IF EXISTS boards;
-CREATE TABLE boards (
- serno int(10) unsigned zerofill NOT NULL auto_increment,
- ethaddr char(17),
- date date NOT NULL,
- batch char(32),
- type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') NOT NULL,
- rev tinyint(3) unsigned zerofill NOT NULL,
- location char(64),
- comments text,
- sdram0 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram1 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram2 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram3 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- flash0 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash1 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash2 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash3 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- zbt0 enum('512K','1M','2M','4M','8M','16M'),
- zbt1 enum('512K','1M','2M','4M','8M','16M'),
- zbt2 enum('512K','1M','2M','4M','8M','16M'),
- zbt3 enum('512K','1M','2M','4M','8M','16M'),
- zbt4 enum('512K','1M','2M','4M','8M','16M'),
- zbt5 enum('512K','1M','2M','4M','8M','16M'),
- zbt6 enum('512K','1M','2M','4M','8M','16M'),
- zbt7 enum('512K','1M','2M','4M','8M','16M'),
- zbt8 enum('512K','1M','2M','4M','8M','16M'),
- zbt9 enum('512K','1M','2M','4M','8M','16M'),
- zbta enum('512K','1M','2M','4M','8M','16M'),
- zbtb enum('512K','1M','2M','4M','8M','16M'),
- zbtc enum('512K','1M','2M','4M','8M','16M'),
- zbtd enum('512K','1M','2M','4M','8M','16M'),
- zbte enum('512K','1M','2M','4M','8M','16M'),
- zbtf enum('512K','1M','2M','4M','8M','16M'),
- xlxtyp0 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp1 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp2 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp3 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxspd0 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd1 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd2 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd3 enum('6','7','8','4','5','9','10','11','12'),
- xlxtmp0 enum('COM','IND'),
- xlxtmp1 enum('COM','IND'),
- xlxtmp2 enum('COM','IND'),
- xlxtmp3 enum('COM','IND'),
- xlxgrd0 enum('NORMAL','ENGSAMP'),
- xlxgrd1 enum('NORMAL','ENGSAMP'),
- xlxgrd2 enum('NORMAL','ENGSAMP'),
- xlxgrd3 enum('NORMAL','ENGSAMP'),
- cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'),
- cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- hstype enum('AMCC-S2064A','Xilinx-Rockets'),
- hschin enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
- hschout enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
- PRIMARY KEY (serno),
- KEY serno (serno),
- UNIQUE serno_2 (serno)
-);
-
-#
-# Table structure for table 'log'
-#
-
-DROP TABLE IF EXISTS log;
-CREATE TABLE log (
- logno int(10) unsigned zerofill NOT NULL auto_increment,
- serno int(10) unsigned zerofill NOT NULL,
- date date NOT NULL,
- details text NOT NULL,
- PRIMARY KEY (logno),
- KEY logno (logno, serno, date),
- UNIQUE logno_2 (logno)
-);
diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php
deleted file mode 100644
index 0b50602..0000000
--- a/tools/bddb/defs.php
+++ /dev/null
@@ -1,710 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // contains mysql user id and password - keep secret
- require("config.php");
-
- if (isset($_REQUEST['logout'])) {
- Header("status: 401 Unauthorized");
- Header("HTTP/1.0 401 Unauthorized");
- Header("WWW-authenticate: basic realm=\"$bddb_label\"");
-
- echo "<html><head><title>" .
- "Access to '$bddb_label' Denied" .
- "</title></head>\n";
- echo "<body bgcolor=#ffffff><br></br><br></br><center><h1>" .
- "You must be an Authorised User " .
- "to access the '$bddb_label'" .
- "</h1>\n</center></body></html>\n";
- exit;
- }
-
- // contents of the various enumerated types - if first item is
- // empty ('') then the enum is allowed to be null (ie "not null"
- // is not set on the column)
-
- // all column names in the database table
- $columns = array(
- 'serno','ethaddr','date','batch',
- 'type','rev','location','comments',
- 'sdram0','sdram1','sdram2','sdram3',
- 'flash0','flash1','flash2','flash3',
- 'zbt0','zbt1','zbt2','zbt3','zbt4','zbt5','zbt6','zbt7',
- 'zbt8','zbt9','zbta','zbtb','zbtc','zbtd','zbte','zbtf',
- 'xlxtyp0','xlxtyp1','xlxtyp2','xlxtyp3',
- 'xlxspd0','xlxspd1','xlxspd2','xlxspd3',
- 'xlxtmp0','xlxtmp1','xlxtmp2','xlxtmp3',
- 'xlxgrd0','xlxgrd1','xlxgrd2','xlxgrd3',
- 'cputyp','cpuspd','cpmspd','busspd',
- 'hstype','hschin','hschout'
- );
-
- // board type
- $type_vals = array('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY');
-
- // Xilinx fpga types
- $xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140');
-
- // Xilinx fpga speeds
- $xlxspd_vals = array('','6','7','8','4','5','9','10','11','12');
-
- // Xilinx fpga temperatures (commercial or industrial)
- $xlxtmp_vals = array('','COM','IND');
-
- // Xilinx fpga grades (normal or engineering sample)
- $xlxgrd_vals = array('','NORMAL','ENGSAMP');
-
- // CPU types
- $cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560');
-
- // CPU/BUS/CPM clock speeds
- $clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ');
-
- // sdram sizes (nbits array is for eeprom config file)
- $sdram_vals = array('','32M','64M','128M','256M','512M','1G','2G','4G');
- $sdram_nbits = array(0,25,26,27,28,29,30,31,32);
-
- // flash sizes (nbits array is for eeprom config file)
- $flash_vals = array('','4M','8M','16M','32M','64M','128M','256M','512M','1G');
- $flash_nbits = array(0,22,23,24,25,26,27,28,29,30);
-
- // zbt ram sizes (nbits array is for write into eeprom config file)
- $zbt_vals = array('','512K','1M','2M','4M','8M','16M');
- $zbt_nbits = array(0,19,20,21,22,23,24);
-
- // high-speed serial attributes
- $hstype_vals = array('','AMCC-S2064A','Xilinx-Rockets');
- $hschin_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
- $hschout_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
-
- // value filters - used when outputting html
- function rev_filter($num) {
- if ($num == 0)
- return "001";
- else
- return sprintf("%03d", $num);
- }
-
- function text_filter($str) {
- return urldecode($str);
- }
-
- mt_srand(time() | getmypid());
-
- // set up MySQL connection
- mysql_connect("", $mysql_user, $mysql_pw) || die("cannot connect");
- mysql_select_db($mysql_db) || die("cannot select db");
-
- // page header
- function pg_head($title)
- {
- echo "<html>\n<head>\n";
- echo "<link rel=stylesheet href=\"bddb.css\" type=\"text/css\" title=\"style sheet\"></link>\n";
- echo "<title>$title</title>\n";
- echo "</head>\n";
- echo "<body>\n";
- echo "<center><h1>$title</h1></center>\n";
- echo "<hr></hr>\n";
- }
-
- // page footer
- function pg_foot()
- {
- echo "<hr></hr>\n";
- echo "<table width=\"100%\"><tr><td align=left>\n<address>" .
- "If you have any problems, email " .
- "<a href=\"mailto:Murray.Jensen@csiro.au\">" .
- "Murray Jensen" .
- "</a></address>\n" .
- "</td><td align=right>\n" .
- "<a href=\"index.php?logout=true\">logout</a>\n" .
- "</td></tr></table>\n";
- echo "<p><small><i>Made with " .
- "<a href=\"http://kyber.dk/phpMyBuilder/\">" .
- "Kyber phpMyBuilder</a></i></small></p>\n";
- echo "</body>\n";
- echo "</html>\n";
- }
-
- // some support functions
-
- if (!function_exists('array_search')) {
-
- function array_search($needle, $haystack, $strict = false) {
-
- if (is_array($haystack) && count($haystack)) {
-
- $ntype = gettype($needle);
-
- foreach ($haystack as $key => $value) {
-
- if ($value == $needle && (!$strict ||
- gettype($value) == $ntype))
- return $key;
- }
- }
-
- return false;
- }
- }
-
- if (!function_exists('in_array')) {
-
- function in_array($needle, $haystack, $strict = false) {
-
- if (is_array($haystack) && count($haystack)) {
-
- $ntype = gettype($needle);
-
- foreach ($haystack as $key => $value) {
-
- if ($value == $needle && (!$strict ||
- gettype($value) == $ntype))
- return true;
- }
- }
-
- return false;
- }
- }
-
- function key_in_array($key, $array) {
- return in_array($key, array_keys($array), true);
- }
-
- function enum_to_index($name, $vals) {
- $index = array_search($GLOBALS[$name], $vals);
- if ($vals[0] != '')
- $index++;
- return $index;
- }
-
- // fetch a value from an array - return empty string is not present
- function get_key_value($key, $array) {
- if (key_in_array($key, $array))
- return $array[$key];
- else
- return '';
- }
-
- function fprintf() {
- $n = func_num_args();
- if ($n < 2)
- return FALSE;
- $a = func_get_args();
- $fp = array_shift($a);
- $x = "\$s = sprintf";
- $sep = '(';
- foreach ($a as $z) {
- $x .= "$sep'$z'";
- $sep = ',';
- }
- $x .= ');';
- eval($x);
- $l = strlen($s);
- $r = fwrite($fp, $s, $l);
- if ($r != $l)
- return FALSE;
- else
- return TRUE;
- }
-
- // functions to display (print) a database table and its columns
-
- function begin_table($ncols) {
- global $table_ncols;
- $table_ncols = $ncols;
- echo "<table align=center width=\"100%\""
- . " border=1 cellpadding=4 cols=$table_ncols>\n";
- }
-
- function begin_field($name, $span = 0) {
- global $table_ncols;
- echo "<tr valign=top>\n";
- echo "\t<th align=center>$name</th>\n";
- if ($span <= 0)
- $span = $table_ncols - 1;
- if ($span > 1)
- echo "\t<td colspan=$span>\n";
- else
- echo "\t<td>\n";
- }
-
- function cont_field($span = 1) {
- echo "\t</td>\n";
- if ($span > 1)
- echo "\t<td colspan=$span>\n";
- else
- echo "\t<td>\n";
- }
-
- function end_field() {
- echo "\t</td>\n";
- echo "</tr>\n";
- }
-
- function end_table() {
- echo "</table>\n";
- }
-
- function print_field($name, $array, $size = 0, $filt='') {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $value = $array[$name];
- else
- $value = '';
-
- if ($filt != '')
- $value = $filt($value);
-
- echo "\t\t<input name=$name value=\"$value\"";
- if ($size > 0)
- echo " size=$size maxlength=$size";
- echo "></input>\n";
-
- end_field();
- }
-
- function print_field_multiline($name, $array, $cols, $rows, $filt='') {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $value = $array[$name];
- else
- $value = '';
-
- if ($filt != '')
- $value = $filt($value);
-
- echo "\t\t<textarea name=$name " .
- "cols=$cols rows=$rows wrap=off>\n";
- echo "$value";
- echo "</textarea>\n";
-
- end_field();
- }
-
- // print a mysql ENUM as an html RADIO INPUT
- function print_enum($name, $array, $vals, $def = -1) {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $chk = array_search($array[$name], $vals, FALSE);
- else
- $chk = $def;
-
- $nval = count($vals);
-
- for ($i = 0; $i < $nval; $i++) {
-
- $val = $vals[$i];
- if ($val == '')
- $pval = "none";
- else
- $pval = "$val";
-
- printf("\t\t<input type=radio name=$name"
- . " value=\"$val\"%s>$pval</input>\n",
- $i == $chk ? " checked" : "");
- }
-
- end_field();
- }
-
- // print a mysql ENUM as an html SELECT INPUT
- function print_enum_select($name, $array, $vals, $def = -1) {
-
- begin_field($name);
-
- echo "\t\t<select name=$name>\n";
-
- if (key_in_array($name, $array))
- $chk = array_search($array[$name], $vals, FALSE);
- else
- $chk = $def;
-
- $nval = count($vals);
-
- for ($i = 0; $i < $nval; $i++) {
-
- $val = $vals[$i];
- if ($val == '')
- $pval = "none";
- else
- $pval = "$val";
-
- printf("\t\t\t<option " .
- "value=\"%s\"%s>%s</option>\n",
- $val, $i == $chk ? " selected" : "", $pval);
- }
-
- echo "\t\t</select>\n";
-
- end_field();
- }
-
- // print a group of mysql ENUMs (e.g. name0,name1,...) as an html SELECT
- function print_enum_multi($base, $array, $vals, $cnt, $defs, $grp = 0) {
-
- global $table_ncols;
-
- if ($grp <= 0)
- $grp = $cnt;
- $ncell = $cnt / $grp;
- $span = ($table_ncols - 1) / $ncell;
-
- begin_field($base, $span);
-
- $nval = count($vals);
-
- for ($i = 0; $i < $cnt; $i++) {
-
- if ($i > 0 && ($i % $grp) == 0)
- cont_field($span);
-
- $name = sprintf("%s%x", $base, $i);
-
- echo "\t\t<select name=$name>\n";
-
- if (key_in_array($name, $array))
- $ai = array_search($array[$name], $vals, FALSE);
- else {
- if (key_in_array($i, $defs))
- $ai = $defs[$i];
- else
- $ai = 0;
- }
-
- for ($j = 0; $j < $nval; $j++) {
-
- $val = $vals[$j];
- if ($val == '')
- $pval = " ";
- else
- $pval = "$val";
-
- printf("\t\t\t<option " .
- "value=\"%s\"%s>%s</option>\n",
- $val,
- $j == $ai ? " selected" : "",
- $pval);
- }
-
- echo "\t\t</select>\n";
- }
-
- end_field();
- }
-
- // functions to handle the form input
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for a MySQL query
- function gather_enum_multi_query($base, $cnt) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if (isset($_REQUEST[$name])) {
- $retval .= sprintf(", %s='%s'",
- $name, $_REQUEST[$name]);
- }
- }
-
- return $retval;
- }
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for a display e.g. in an html table cell
- function gather_enum_multi_print($base, $cnt, $array) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if ($array[$name] != '') {
- if ($retval != '')
- $retval .= ',';
- $retval .= $array[$name];
- }
- }
-
- return $retval;
- }
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for writing to the eeprom data file
- function gather_enum_multi_write($base, $cnt, $vals, $xfrm = array()) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if ($GLOBALS[$name] != '') {
- if ($retval != '')
- $retval .= ',';
- $index = enum_to_index($name, $vals);
- if ($xfrm != array())
- $retval .= $xfrm[$index];
- else
- $retval .= $index;
- }
- }
-
- return $retval;
- }
-
- // count how many parts of an "enum_multi" are actually set
- function count_enum_multi($base, $cnt) {
-
- $retval = 0;
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if (isset($_REQUEST[$name]))
- $retval++;
- }
-
- return $retval;
- }
-
- // ethernet address functions
-
- // generate a (possibly not unique) random vendor ethernet address
- // (setting bit 6 in the ethernet address - motorola wise i.e. bit 0
- // is the most significant bit - means it is not an assigned ethernet
- // address - it is a "locally administered" address). Also, make sure
- // it is NOT a multicast ethernet address (by setting bit 7 to 0).
- // e.g. the first byte of all ethernet addresses generated here will
- // have 2 in the bottom two bits (incidentally, these are the first
- // two bits transmitted on the wire, since the octets in ethernet
- // addresses are transmitted LSB first).
-
- function gen_eth_addr($serno) {
-
- $ethaddr_hgh = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
- $ethaddr_mid = mt_rand(0, 65535);
- $ethaddr_low = mt_rand(0, 65535);
-
- return sprintf("%02lx:%02lx:%02lx:%02lx:%02lx:%02lx",
- $ethaddr_hgh >> 8, $ethaddr_hgh & 0xff,
- $ethaddr_mid >> 8, $ethaddr_mid & 0xff,
- $ethaddr_low >> 8, $ethaddr_low & 0xff);
- }
-
- // check that an ethernet address is valid
- function eth_addr_is_valid($ethaddr) {
-
- $ethbytes = split(':', $ethaddr);
-
- if (count($ethbytes) != 6)
- return FALSE;
-
- for ($i = 0; $i < 6; $i++) {
- $ethbyte = $ethbytes[$i];
- if (!ereg('^[0-9a-f][0-9a-f]$', $ethbyte))
- return FALSE;
- }
-
- return TRUE;
- }
-
- // write a simple eeprom configuration file
- function write_eeprom_cfg_file() {
-
- global $sernos, $nsernos, $bddb_cfgdir, $numerrs, $cfgerrs;
- global $date, $batch, $type_vals, $rev;
- global $sdram_vals, $sdram_nbits;
- global $flash_vals, $flash_nbits;
- global $zbt_vals, $zbt_nbits;
- global $xlxtyp_vals, $xlxspd_vals, $xlxtmp_vals, $xlxgrd_vals;
- global $cputyp, $cputyp_vals, $clk_vals;
- global $hstype, $hstype_vals, $hschin, $hschout;
-
- $numerrs = 0;
- $cfgerrs = array();
-
- for ($i = 0; $i < $nsernos; $i++) {
-
- $serno = sprintf("%010d", $sernos[$i]);
-
- $wfp = @fopen($bddb_cfgdir . "/$serno.cfg", "w");
- if (!$wfp) {
- $cfgerrs[$i] = 'file create fail';
- $numerrs++;
- continue;
- }
- set_file_buffer($wfp, 0);
-
- if (!fprintf($wfp, "serno=%d\n", $sernos[$i])) {
- $cfgerrs[$i] = 'cfg wr fail (serno)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if (!fprintf($wfp, "date=%s\n", $date)) {
- $cfgerrs[$i] = 'cfg wr fail (date)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if ($batch != '') {
- if (!fprintf($wfp, "batch=%s\n", $batch)) {
- $cfgerrs[$i] = 'cfg wr fail (batch)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $typei = enum_to_index("type", $type_vals);
- if (!fprintf($wfp, "type=%d\n", $typei)) {
- $cfgerrs[$i] = 'cfg wr fail (type)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if (!fprintf($wfp, "rev=%d\n", $rev)) {
- $cfgerrs[$i] = 'cfg wr fail (rev)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- $s = gather_enum_multi_write("sdram", 4,
- $sdram_vals, $sdram_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "sdram=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (sdram)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("flash", 4,
- $flash_vals, $flash_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "flash=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (flash)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("zbt", 16,
- $zbt_vals, $zbt_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "zbt=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (zbt)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxtyp", 4, $xlxtyp_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxtyp=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxtyp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxspd", 4, $xlxspd_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxspd=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxspd)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxtmp", 4, $xlxtmp_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxtmp=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxtmp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxgrd", 4, $xlxgrd_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxgrd=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxgrd)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if ($cputyp != '') {
- $cputypi = enum_to_index("cputyp",$cputyp_vals);
- $cpuspdi = enum_to_index("cpuspd", $clk_vals);
- $busspdi = enum_to_index("busspd", $clk_vals);
- $cpmspdi = enum_to_index("cpmspd", $clk_vals);
- $b = fprintf($wfp, "cputyp=%d\ncpuspd=%d\n" .
- "busspd=%d\ncpmspd=%d\n",
- $cputypi, $cpuspdi, $busspdi, $cpmspdi);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (cputyp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if ($hstype != '') {
- $hstypei = enum_to_index("hstype",$hstype_vals);
- $b = fprintf($wfp, "hstype=%d\n" .
- "hschin=%s\nhschout=%s\n",
- $hstypei, $hschin, $hschout);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (hstype)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if (!fclose($wfp)) {
- $cfgerrs[$i] = 'file cls fail';
- $numerrs++;
- }
- }
-
- return $numerrs;
- }
-?>
diff --git a/tools/bddb/dodelete.php b/tools/bddb/dodelete.php
deleted file mode 100644
index 4839e36..0000000
--- a/tools/bddb/dodelete.php
+++ /dev/null
@@ -1,65 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // dodelete page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Delete Board Results");
-
- if (!isset($_REQUEST['serno']))
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- mysql_query("delete from boards where serno=$serno");
-
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe board with serial number <b>$serno</b> was"
- . " successfully deleted\n";
- mysql_query("delete from log where serno=$serno");
- if (mysql_errno()) {
- $errstr = mysql_error();
- echo "\t\t\t<font size=+4>\n";
- echo "\t\t\t\t<p>\n";
- echo "\t\t\t\t\tBut the following error occurred " .
- "when deleting the log entries:\n";
- echo "\t\t\t\t</p>\n";
- echo "\t\t\t\t<center>\n";
- printf("\t\t\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t\t\t</center>\n";
- echo "\t\t\t</font>\n";
- }
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-?>
-<p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="browse.php">Back to Browse</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/dodellog.php b/tools/bddb/dodellog.php
deleted file mode 100644
index 9dd78c1..0000000
--- a/tools/bddb/dodellog.php
+++ /dev/null
@@ -1,57 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // dodelete page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Delete Log Entry Results");
-
- if (!isset($_REQUEST['serno']))
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == 0)
- die("the log entry number not specified!");
- $logno=$_REQUEST['logno'];
-
- mysql_query("delete from log where serno=$serno and logno=$logno");
-
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe log entry with log number <b>$logno</b>\n";
- echo "\t\t\tand serial number <b>$serno</b> ";
- echo "was successfully deleted\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-?>
-<p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/doedit.php b/tools/bddb/doedit.php
deleted file mode 100644
index 13fbb69..0000000
--- a/tools/bddb/doedit.php
+++ /dev/null
@@ -1,186 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- $query="update boards set";
-
- if (isset($_REQUEST['ethaddr'])) {
- $ethaddr=$_REQUEST['ethaddr'];
- if (!eth_addr_is_valid($ethaddr))
- die("ethaddr is invalid ('$ethaddr')");
- $query.=" ethaddr='$ethaddr',";
- }
-
- if (isset($_REQUEST['date'])) {
- $date=$_REQUEST['date'];
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', " .
- "yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
- }
-
- if (isset($_REQUEST['batch'])) {
- $batch=$_REQUEST['batch'];
- if (strlen($batch) > 32)
- die("batch field too long (>32)");
- $query.=", batch='$batch'";
- }
-
- if (isset($_REQUEST['type'])) {
- $type=$_REQUEST['type'];
- if (!in_array($type, $type_vals))
- die("Invalid type ($type) specified");
- $query.=", type='$type'";
- }
-
- if (isset($_REQUEST['rev'])) {
- $rev=$_REQUEST['rev'];
- if (($rev = intval($rev)) <= 0 || $rev > 255)
- die("Revision number is invalid ($rev)");
- $query.=sprintf(", rev=%d", $rev);
- }
-
- if (isset($_REQUEST['location'])) {
- $location=$_REQUEST['location'];
- if (strlen($location) > 64)
- die("location field too long (>64)");
- $query.=", location='$location'";
- }
-
- if (isset($_REQUEST['comments']))
- $comments=$_REQUEST['comments'];
- $query.=", comments='" . rawurlencode($comments) . "'";
-
- $query.=gather_enum_multi_query("sdram", 4);
-
- $query.=gather_enum_multi_query("flash", 4);
-
- $query.=gather_enum_multi_query("zbt", 16);
-
- $query.=gather_enum_multi_query("xlxtyp", 4);
- $nxlx = count_enum_multi("xlxtyp", 4);
-
- $query.=gather_enum_multi_query("xlxspd", 4);
- if (count_enum_multi("xlxspd", 4) != $nxlx)
- die("number of xilinx speeds not same as number of types");
-
- $query.=gather_enum_multi_query("xlxtmp", 4);
- if (count_enum_multi("xlxtmp", 4) != $nxlx)
- die("number of xilinx temps. not same as number of types");
-
- $query.=gather_enum_multi_query("xlxgrd", 4);
- if (count_enum_multi("xlxgrd", 4) != $nxlx)
- die("number of xilinx grades not same as number of types");
-
- if (isset($_REQUEST['cputyp'])) {
- $cputyp=$_REQUEST['cputyp'];
- $query.=", cputyp='$cputyp'";
- if (!isset($_REQUEST['cpuspd']) || $_REQUEST['cpuspd'] == '')
- die("must specify cpu speed if cpu type is defined");
- $cpuspd=$_REQUEST['cpuspd'];
- $query.=", cpuspd='$cpuspd'";
- if (!isset($_REQUEST['cpmspd']) || $_REQUEST['cpmspd'] == '')
- die("must specify cpm speed if cpu type is defined");
- $cpmspd=$_REQUEST['cpmspd'];
- $query.=", cpmspd='$cpmspd'";
- if (!isset($_REQUEST['busspd']) || $_REQUEST['busspd'] == '')
- die("must specify bus speed if cpu type is defined");
- $busspd=$_REQUEST['busspd'];
- $query.=", busspd='$busspd'";
- }
- else {
- if (isset($_REQUEST['cpuspd']))
- die("can't specify cpu speed if there is no cpu");
- if (isset($_REQUEST['cpmspd']))
- die("can't specify cpm speed if there is no cpu");
- if (isset($_REQUEST['busspd']))
- die("can't specify bus speed if there is no cpu");
- }
-
- if (isset($_REQUEST['hschin'])) {
- $hschin=$_REQUEST['hschin'];
- if (($hschin = intval($hschin)) < 0 || $hschin > 4)
- die("Invalid number of hs input chans ($hschin)");
- }
- else
- $hschin = 0;
- if (isset($_REQUEST['hschout'])) {
- $hschout=$_REQUEST['hschout'];
- if (($hschout = intval($hschout)) < 0 || $hschout > 4)
- die("Invalid number of hs output chans ($hschout)");
- }
- else
- $hschout = 0;
- if (isset($_REQUEST['hstype'])) {
- $hstype=$_REQUEST['hstype'];
- $query.=", hstype='$hstype'";
- }
- else {
- if ($_REQUEST['hschin'] != 0)
- die("number of high-speed input channels must be zero"
- . " if high-speed chip is not present");
- if ($_REQUEST['hschout'] != 0)
- die("number of high-speed output channels must be zero"
- . " if high-speed chip is not present");
- }
- $query.=", hschin='$hschin'";
- $query.=", hschout='$hschout'";
-
- $query.=" where serno=$serno";
-
- mysql_query($query);
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- $sernos = array($serno);
- $nsernos = 1;
-
- write_eeprom_cfg_file();
-
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe board with serial number <b>$serno</b> was"
- . " successfully updated";
- if ($numerrs > 0) {
- $errstr = $cfgerrs[0];
- echo "<br>\n\t\t\t";
- echo "(but the cfg file update failed: $errstr)";
- }
- echo "\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="browse.php">Back to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/doedlog.php b/tools/bddb/doedlog.php
deleted file mode 100644
index 7009aa7..0000000
--- a/tools/bddb/doedlog.php
+++ /dev/null
@@ -1,76 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Log Entry Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
- die("log number not specified!");
- $logno=intval($_REQUEST['logno']);
-
- $query="update log set";
-
- if (isset($_REQUEST['date'])) {
- $date=$_REQUEST['date'];
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', " .
- "yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
- }
-
- if (isset($_REQUEST['who'])) {
- $who=$_REQUEST['who'];
- $query.=", who='" . $who . "'";
- }
-
- if (isset($_REQUEST['details'])) {
- $details=$_REQUEST['details'];
- $query.=", details='" . rawurlencode($details) . "'";
- }
-
- $query.=" where serno=$serno and logno=$logno";
-
- mysql_query($query);
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe log entry with log number <b>$logno</b> and\n";
- echo "\t\t\tserial number <b>$serno</b> ";
- echo "was successfully updated\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php
deleted file mode 100644
index 39b2c78..0000000
--- a/tools/bddb/donew.php
+++ /dev/null
@@ -1,230 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Board Registration Results");
-
- if (isset($_REQUEST['serno'])) {
- $serno=$_REQUEST['serno'];
- die("serial number must not be set ($serno) when Creating!");
- }
-
- $query="update boards set";
-
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
-
- if ($batch != '') {
- if (strlen($batch) > 32)
- die("batch field too long (>32)");
- $query.=", batch='$batch'";
- }
-
- if (!in_array($type, $type_vals))
- die("Invalid type ($type) specified");
- $query.=", type='$type'";
-
- if (($rev = intval($rev)) <= 0 || $rev > 255)
- die("Revision number is invalid ($rev)");
- $query.=sprintf(", rev=%d", $rev);
-
- $query.=gather_enum_multi_query("sdram", 4);
-
- $query.=gather_enum_multi_query("flash", 4);
-
- $query.=gather_enum_multi_query("zbt", 16);
-
- $query.=gather_enum_multi_query("xlxtyp", 4);
- $nxlx = count_enum_multi("xlxtyp", 4);
-
- $query.=gather_enum_multi_query("xlxspd", 4);
- if (count_enum_multi("xlxspd", 4) != $nxlx)
- die("number of xilinx speeds not same as number of types");
-
- $query.=gather_enum_multi_query("xlxtmp", 4);
- if (count_enum_multi("xlxtmp", 4) != $nxlx)
- die("number of xilinx temps. not same as number of types");
-
- $query.=gather_enum_multi_query("xlxgrd", 4);
- if (count_enum_multi("xlxgrd", 4) != $nxlx)
- die("number of xilinx grades not same as number of types");
-
- if ($cputyp == '') {
- if ($cpuspd != '')
- die("can't specify cpu speed if there is no cpu");
- if ($cpmspd != '')
- die("can't specify cpm speed if there is no cpu");
- if ($busspd != '')
- die("can't specify bus speed if there is no cpu");
- }
- else {
- $query.=", cputyp='$cputyp'";
- if ($cpuspd == '')
- die("must specify cpu speed if cpu type is defined");
- $query.=", cpuspd='$cpuspd'";
- if ($cpmspd == '')
- die("must specify cpm speed if cpu type is defined");
- $query.=", cpmspd='$cpmspd'";
- if ($busspd == '')
- die("must specify bus speed if cpu type is defined");
- $query.=", busspd='$busspd'";
- }
-
- if (($hschin = intval($hschin)) < 0 || $hschin > 4)
- die("Invalid number of hs input chans ($hschin)");
- if (($hschout = intval($hschout)) < 0 || $hschout > 4)
- die("Invalid number of hs output chans ($hschout)");
- if ($hstype == '') {
- if ($hschin != 0)
- die("number of high-speed input channels must be zero"
- . " if high-speed chip is not present");
- if ($hschout != 0)
- die("number of high-speed output channels must be zero"
- . " if high-speed chip is not present");
- }
- else
- $query.=", hstype='$hstype'";
- $query.=", hschin='$hschin'";
- $query.=", hschout='$hschout'";
-
- // echo "final query = '$query'<br>\n";
-
- $quant = intval($quant);
- if ($quant <= 0) $quant = 1;
-
- $sernos = array();
- if ($geneths)
- $ethaddrs = array();
-
- $sqlerr = '';
-
- while ($quant-- > 0) {
-
- mysql_query("insert into boards (serno) values (null)");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
- break;
- }
-
- $serno = mysql_insert_id();
- if (!$serno) {
- $sqlerr = "couldn't allocate new serial number";
- break;
- }
-
- mysql_query($query . " where serno=$serno");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
- break;
- }
-
- array_push($sernos, $serno);
-
- if ($geneths) {
-
- $ethaddr = gen_eth_addr($serno);
-
- mysql_query("update boards set ethaddr='$ethaddr'" .
- " where serno=$serno");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
-
- array_push($ethaddrs,
- "<font color=#ff0000><b>" .
- "db save fail" .
- "</b></font>");
- break;
- }
-
- array_push($ethaddrs, $ethaddr);
- }
- }
-
- $nsernos = count($sernos);
-
- if ($nsernos > 0) {
-
- write_eeprom_cfg_file();
-
- echo "<font size=+2>\n";
- echo "\t<p>\n";
- echo "\t\tThe following board serial numbers were"
- . " successfully allocated";
- if ($numerrs > 0)
- echo " (but with $numerrs cfg file error" .
- ($numerrs > 1 ? "s" : "") . ")";
- echo ":\n";
- echo "\t</p>\n";
-
- echo "</font>\n";
-
- echo "<table align=center width=\"100%\">\n";
- echo "<tr>\n";
- echo "\t<th>Serial Number</th>\n";
- if ($numerrs > 0)
- echo "\t<th>Cfg File Errs</th>\n";
- if ($geneths)
- echo "\t<th>Ethernet Address</th>\n";
- echo "</tr>\n";
-
- for ($i = 0; $i < $nsernos; $i++) {
-
- $serno = sprintf("%010d", $sernos[$i]);
-
- echo "<tr>\n";
-
- echo "\t<td align=center><font size=+2>" .
- "<b>$serno</b></font></td>\n";
-
- if ($numerrs > 0) {
- if (($errstr = $cfgerrs[$i]) == '')
- $errstr = ' ';
- echo "\t<td align=center>" .
- "<font size=+2 color=#ff0000><b>" .
- $errstr .
- "</b></font></td>\n";
- }
-
- if ($geneths) {
- echo "\t<td align=center>" .
- "<font size=+2 color=#00ff00><b>" .
- $ethaddrs[$i] .
- "</b></font></td>\n";
- }
-
- echo "</tr>\n";
- }
-
- echo "</table>\n";
- }
-
- if ($sqlerr != '') {
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following SQL error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $sqlerr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="browse.php">Go to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/donewlog.php b/tools/bddb/donewlog.php
deleted file mode 100644
index 7635d29..0000000
--- a/tools/bddb/donewlog.php
+++ /dev/null
@@ -1,86 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Add Log Entry Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified!");
- $serno=intval($_REQUEST['serno']);
-
- if (isset($_REQUEST['logno'])) {
- $logno=$_REQUEST['logno'];
- die("log number must not be set ($logno) when Creating!");
- }
-
- $query="update log set serno=$serno";
-
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
- $query.=", date='$date'";
-
- if (isset($_REQUEST['who'])) {
- $who=$_REQUEST['who'];
- $query.=", who='" . $who . "'";
- }
-
- if (isset($_REQUEST['details'])) {
- $details=$_REQUEST['details'];
- $query.=", details='" . rawurlencode($details) . "'";
- }
-
- // echo "final query = '$query'<br>\n";
-
- $sqlerr = '';
-
- mysql_query("insert into log (logno) values (null)");
- if (mysql_errno())
- $sqlerr = mysql_error();
- else {
- $logno = mysql_insert_id();
- if (!$logno)
- $sqlerr = "couldn't allocate new serial number";
- else {
- mysql_query($query . " where logno=$logno");
- if (mysql_errno())
- $sqlerr = mysql_error();
- }
- }
-
- if ($sqlerr == '') {
- echo "<font size=+2>\n";
- echo "\t<p>\n";
- echo "\t\tA log entry with log number '$logno' was " .
- "added to the board with serial number '$serno'\n";
- echo "\t</p>\n";
- echo "</font>\n";
- }
- else {
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following SQL error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $sqlerr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Go to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/edit.php b/tools/bddb/edit.php
deleted file mode 100644
index dd8c26c..0000000
--- a/tools/bddb/edit.php
+++ /dev/null
@@ -1,131 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Registration");
-
- if ($serno == 0)
- die("serial number not specified or invalid!");
-
- $pserno = sprintf("%010d", $serno);
-
- echo "<center><b><font size=+2>";
- echo "Board Serial Number: $pserno";
- echo "</font></b></center>\n";
-
-?>
-<p>
-<form action=doedit.php method=POST>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
-
- $r=mysql_query("select * from boards where serno=$serno");
- $row=mysql_fetch_array($r);
- if(!$row) die("no record of serial number '$serno' in database");
-
- begin_table(5);
-
- // ethaddr char(17)
- print_field("ethaddr", $row, 17);
-
- // date date
- print_field("date", $row);
-
- // batch char(32)
- print_field("batch", $row, 32);
-
- // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
- print_enum("type", $row, $type_vals);
-
- // rev tinyint(3) unsigned zerofill
- print_field("rev", $row, 3, 'rev_filter');
-
- // location char(64)
- print_field("location", $row, 64);
-
- // comments text
- print_field_multiline("comments", $row, 60, 10, 'text_filter');
-
- // sdram[0-3] enum('32M','64M','128M','256M')
- print_enum_multi("sdram", $row, $sdram_vals, 4, array());
-
- // flash[0-3] enum('4M','8M','16M','32M','64M')
- print_enum_multi("flash", $row, $flash_vals, 4, array());
-
- // zbt[0-f] enum('512K','1M','2M','4M')
- print_enum_multi("zbt", $row, $zbt_vals, 16, array());
-
- // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
- print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(), 1);
-
- // xlxspd[0-3] enum('6','7','8')
- print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(), 1);
-
- // xlxtmp[0-3] enum('COM','IND')
- print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(), 1);
-
- // xlxgrd[0-3] enum('NORMAL','ENGSAMP')
- print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(), 1);
-
- // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
- print_enum("cputyp", $row, $cputyp_vals);
-
- // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpuspd", $row, $clk_vals);
-
- // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpmspd", $row, $clk_vals);
-
- // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("busspd", $row, $clk_vals);
-
- // hstype enum('AMCC-S2064A')
- print_enum("hstype", $row, $hstype_vals);
-
- // hschin enum('0','1','2','3','4')
- print_enum("hschin", $row, $hschin_vals);
-
- // hschout enum('0','1','2','3','4')
- print_enum("hschout", $row, $hschout_vals);
-
- end_table();
-
- echo "<p>\n";
- echo "<center><b>";
- echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
- echo "<br></br>\n";
- echo "<tt>[ <a href=\"dodelete.php?serno=$serno\">delete</a> ]</tt>";
- echo "</b></center>\n";
- echo "</p>\n";
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center>
- <input type=submit value=Edit>
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value=Reset>
- </td>
- <td>
-
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-</p>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/edlog.php b/tools/bddb/edlog.php
deleted file mode 100644
index 8befd35..0000000
--- a/tools/bddb/edlog.php
+++ /dev/null
@@ -1,86 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Log Entry");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified!");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
- die("log number not specified!");
- $logno=intval($_REQUEST['logno']);
-
- $pserno = sprintf("%010d", $serno);
- $plogno = sprintf("%010d", $logno);
-
- echo "<center><b><font size=+2>";
- echo "Board Serial Number: $pserno, Log Number: $plogno";
- echo "</font></b></center>\n";
-
-?>
-<p>
-<form action=doedlog.php method=POST>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
- echo "<input type=hidden name=logno value=$logno>\n";
-
- $r=mysql_query("select * from log where serno=$serno and logno=$logno");
- $row=mysql_fetch_array($r);
- if(!$row)
- die("no record of log entry with serial number '$serno' " .
- "and log number '$logno' in database");
-
- begin_table(3);
-
- // date date
- print_field("date", $row);
-
- // who char(20)
- print_field("who", $row);
-
- // details text
- print_field_multiline("details", $row, 60, 10, 'text_filter');
-
- end_table();
-
- echo "<p>\n";
- echo "<center><b>";
- echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
- echo "<br></br>\n";
- echo "<tt>[ <a href=\"dodellog.php?serno=$serno&logno=$logno\">delete</a> ]</tt>";
- echo "</b></center>\n";
- echo "</p>\n";
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center>
- <input type=submit value=Edit>
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value=Reset>
- </td>
- <td>
-
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-</p>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/execute.php b/tools/bddb/execute.php
deleted file mode 100644
index 0b62882..0000000
--- a/tools/bddb/execute.php
+++ /dev/null
@@ -1,33 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
-
- $submit=isset($_REQUEST['submit'])?$_REQUEST['submit']:"[NOT SET]";
-
- switch ($submit) {
-
- case "New":
- require("new.php");
- break;
-
- case "Edit":
- require("edit.php");
- break;
-
- case "Browse":
- require("browse.php");
- break;
-
- case "Log":
- require("brlog.php");
- break;
-
- default:
- require("badsubmit.php");
- break;
- }
-?>
diff --git a/tools/bddb/index.php b/tools/bddb/index.php
deleted file mode 100644
index 842aed5..0000000
--- a/tools/bddb/index.php
+++ /dev/null
@@ -1,38 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- require("defs.php");
- pg_head("$bddb_label");
-?>
-<font size="+4">
- <form action=execute.php method=POST>
- <table width="100%" cellspacing=10 cellpadding=10>
- <tr>
- <td align=center>
- <input type=submit name=submit value="New"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Edit"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Browse"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Log"></input>
- </td>
- </tr>
- <tr>
- <td align=center colspan=4>
- <b>Serial Number:</b>
- <input type=text name=serno size=10 maxsize=10 value=""></input>
- </td>
- </tr>
- </table>
- </form>
-</font>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/new.php b/tools/bddb/new.php
deleted file mode 100644
index 30323ff..0000000
--- a/tools/bddb/new.php
+++ /dev/null
@@ -1,120 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - New Board Registration");
-?>
-<form action=donew.php method=POST>
-<p></p>
-<?php
- $serno=intval($serno);
- // if a serial number was supplied, fetch the record
- // and use its contents as defaults
- if ($serno != 0) {
- $r=mysql_query("select * from boards where serno=$serno");
- $row=mysql_fetch_array($r);
- if(!$row)die("no record of serial number '$serno' in database");
- }
- else
- $row = array();
-
- begin_table(5);
-
- // date date
- print_field("date", array('date' => date("Y-m-d")));
-
- // batch char(32)
- print_field("batch", $row, 32);
-
- // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
- print_enum("type", $row, $type_vals, 0);
-
- // rev tinyint(3) unsigned zerofill
- print_field("rev", $row, 3, 'rev_filter');
-
- // sdram[0-3] enum('32M','64M','128M','256M')
- print_enum_multi("sdram", $row, $sdram_vals, 4, array(2));
-
- // flash[0-3] enum('4M','8M','16M','32M','64M')
- print_enum_multi("flash", $row, $flash_vals, 4, array(2));
-
- // zbt[0-f] enum('512K','1M','2M','4M')
- print_enum_multi("zbt", $row, $zbt_vals, 16, array(2, 2));
-
- // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
- print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(1), 1);
-
- // xlxspd[0-3] enum('6','7','8')
- print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(1), 1);
-
- // xlxtmp[0-3] enum('COM','IND')
- print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(1), 1);
-
- // xlxgrd[0-3] enum('NORMAL','ENGSAMP')
- print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(1), 1);
-
- // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
- print_enum("cputyp", $row, $cputyp_vals, 1);
-
- // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpuspd", $row, $clk_vals, 4);
-
- // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpmspd", $row, $clk_vals, 4);
-
- // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("busspd", $row, $clk_vals, 2);
-
- // hstype enum('AMCC-S2064A')
- print_enum("hstype", $row, $hstype_vals, 1);
-
- // hschin enum('0','1','2','3','4')
- print_enum("hschin", $row, $hschin_vals, 4);
-
- // hschout enum('0','1','2','3','4')
- print_enum("hschout", $row, $hschout_vals, 4);
-
- end_table();
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center colspan=3>
- Allocate
- <input type=text name=quant size=2 maxlength=2 value=" 1">
- board serial number(s)
- </td>
-</tr>
-<tr>
- <td align=center colspan=3>
- <input type=checkbox name=geneths checked>
- Generate Ethernet Address(es)
- </td>
-</tr>
-<tr>
- <td colspan=3>
-
- </td>
-</tr>
-<tr>
- <td align=center>
- <input type=submit value="Register Board">
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value="Reset Form Contents">
- </td>
-</tr>
-</table>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/newlog.php b/tools/bddb/newlog.php
deleted file mode 100644
index 609bb85..0000000
--- a/tools/bddb/newlog.php
+++ /dev/null
@@ -1,54 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen@csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - New Log Entry");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified or invalid!");
- $serno=intval($_REQUEST['serno']);
-
- if (isset($_REQUEST['logno'])) {
- $logno=$_REQUEST['logno'];
- die("log number must not be specified when adding! ($logno)");
- }
-?>
-<form action=donewlog.php method=POST>
-<p></p>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
-
- begin_table(3);
-
- // date date
- print_field("date", array('date' => date("Y-m-d")));
-
- // who char(20)
- print_field("who", array());
-
- // details text
- print_field_multiline("details", array(), 60, 10, 'text_filter');
-
- end_table();
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center>
- <input type=submit value="Add Log Entry">
- </td>
- <td align=center>
- <input type=reset value="Reset Form Contents">
- </td>
-</tr>
-</table>
-</form>
-<?php
- pg_foot();
-?>
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 04/25] ppc: Zap HWW1U1A board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (2 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 03/25] ppc: Zap Hymod board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 05/25] ppc: Zap IDS8247 board Marek Vasut
` (20 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This is the only used of CONFIG_SPI_X macro, just zap this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 -
board/exmeritus/hww1u1a/Kconfig | 12 -
board/exmeritus/hww1u1a/MAINTAINERS | 6 -
board/exmeritus/hww1u1a/Makefile | 12 -
board/exmeritus/hww1u1a/ddr.c | 34 ---
board/exmeritus/hww1u1a/gpios.h | 56 -----
board/exmeritus/hww1u1a/hww1u1a.c | 268 ---------------------
board/exmeritus/hww1u1a/law.c | 18 --
board/exmeritus/hww1u1a/tlb.c | 90 -------
configs/HWW1U1A_defconfig | 3 -
include/configs/HWW1U1A.h | 460 ------------------------------------
11 files changed, 963 deletions(-)
delete mode 100644 board/exmeritus/hww1u1a/Kconfig
delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS
delete mode 100644 board/exmeritus/hww1u1a/Makefile
delete mode 100644 board/exmeritus/hww1u1a/ddr.c
delete mode 100644 board/exmeritus/hww1u1a/gpios.h
delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c
delete mode 100644 board/exmeritus/hww1u1a/law.c
delete mode 100644 board/exmeritus/hww1u1a/tlb.c
delete mode 100644 configs/HWW1U1A_defconfig
delete mode 100644 include/configs/HWW1U1A.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 8c1c01c..c0bb67b 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -13,9 +13,6 @@ config TARGET_SBC8548
config TARGET_SOCRATES
bool "Support socrates"
-config TARGET_HWW1U1A
- bool "Support HWW1U1A"
-
config TARGET_B4860QDS
bool "Support B4860QDS"
@@ -144,7 +141,6 @@ config TARGET_XPEDITE550X
endchoice
-source "board/exmeritus/hww1u1a/Kconfig"
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/board/exmeritus/hww1u1a/Kconfig b/board/exmeritus/hww1u1a/Kconfig
deleted file mode 100644
index 7a76b43..0000000
--- a/board/exmeritus/hww1u1a/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_HWW1U1A
-
-config SYS_BOARD
- default "hww1u1a"
-
-config SYS_VENDOR
- default "exmeritus"
-
-config SYS_CONFIG_NAME
- default "HWW1U1A"
-
-endif
diff --git a/board/exmeritus/hww1u1a/MAINTAINERS b/board/exmeritus/hww1u1a/MAINTAINERS
deleted file mode 100644
index b37f10b..0000000
--- a/board/exmeritus/hww1u1a/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HWW1U1A BOARD
-#M: Kyle Moffett <Kyle.D.Moffett@boeing.com>
-S: Orphan (since 2014-06)
-F: board/exmeritus/hww1u1a/
-F: include/configs/HWW1U1A.h
-F: configs/HWW1U1A_defconfig
diff --git a/board/exmeritus/hww1u1a/Makefile b/board/exmeritus/hww1u1a/Makefile
deleted file mode 100644
index d0cd878..0000000
--- a/board/exmeritus/hww1u1a/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright 2007-2009 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += hww1u1a.o
-obj-y += law.o
-obj-y += tlb.o
-obj-$(CONFIG_DDR_SPD) += ddr.o
diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c
deleted file mode 100644
index e1f6865..0000000
--- a/board/exmeritus/hww1u1a/ddr.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2009-2010 eXMeritus, A Boeing Company
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- /*
- * We only support one DIMM, so according to the P2020 docs we should
- * set the options as follows:
- */
- popts->cs_local_opts[0].odt_rd_cfg = 0;
- popts->cs_local_opts[0].odt_wr_cfg = 4;
- popts->cs_local_opts[1].odt_rd_cfg = 0;
- popts->cs_local_opts[1].odt_wr_cfg = 0;
- popts->half_strength_driver_enable = 0;
-
- /* Manually configured for our static clock rate */
- popts->clk_adjust = 4;
- popts->cpo_override = 4;
- popts->write_data_delay = 2;
- popts->twot_en = 0;
-}
diff --git a/board/exmeritus/hww1u1a/gpios.h b/board/exmeritus/hww1u1a/gpios.h
deleted file mode 100644
index 499880f..0000000
--- a/board/exmeritus/hww1u1a/gpios.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2010 eXMeritus, A Boeing Company
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/mpc85xx_gpio.h>
-
-/* Common CPU A/B GPIOs (GPIO8-GPIO15 and IRQ4-IRQ6) */
-#define GPIO_CPU_ID (1UL << (31 - 8))
-#define GPIO_BLUE_LED (1UL << (31 - 9))
-#define GPIO_DIMM_RESET (1UL << (31 - 10))
-#define GPIO_USB_RESET (1UL << (31 - 11))
-#define GPIO_UNUSED_12 (1UL << (31 - 12))
-#define GPIO_GETH0_RESET (1UL << (31 - 13))
-#define GPIO_RS422_RE (1UL << (31 - 14))
-#define GPIO_RS422_DE (1UL << (31 - 15))
-#define IRQ_I2CINT (1UL << (31 - 20))
-#define IRQ_FANINT (1UL << (31 - 21))
-#define IRQ_DIMM_EVENT (1UL << (31 - 22))
-
-#define GPIO_RESETS (GPIO_DIMM_RESET|GPIO_USB_RESET|GPIO_GETH0_RESET)
-
-/* CPU A GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */
-#define GPIO_CPUA_UNUSED_0 (1UL << (31 - 0))
-#define GPIO_CPUA_CPU_READY (1UL << (31 - 1))
-#define GPIO_CPUA_DEBUG_LED2 (1UL << (31 - 2))
-#define GPIO_CPUA_DEBUG_LED1 (1UL << (31 - 3))
-#define GPIO_CPUA_TDIS2B (1UL << (31 - 4)) /* MAC 2 TX B */
-#define GPIO_CPUA_TDIS2A (1UL << (31 - 5)) /* MAC 2 TX A */
-#define GPIO_CPUA_TDIS1B (1UL << (31 - 6)) /* MAC 1 TX B */
-#define GPIO_CPUA_TDIS1A (1UL << (31 - 7)) /* MAC 1 TX A */
-#define IRQ_CPUA_UNUSED_0 (1UL << (31 - 16))
-#define IRQ_CPUA_UNUSED_1 (1UL << (31 - 17))
-#define IRQ_CPUA_UNUSED_2 (1UL << (31 - 18))
-#define IRQ_CPUA_UNUSED_3 (1UL << (31 - 19))
-
-/* CPU B GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */
-#define GPIO_CPUB_RMUX_SEL1B (1UL << (31 - 0))
-#define GPIO_CPUB_RMUX_SEL0B (1UL << (31 - 1))
-#define GPIO_CPUB_RMUX_SEL1A (1UL << (31 - 2))
-#define GPIO_CPUB_RMUX_SEL0A (1UL << (31 - 3))
-#define GPIO_CPUB_UNUSED_4 (1UL << (31 - 4))
-#define GPIO_CPUB_CPU_READY (1UL << (31 - 5))
-#define GPIO_CPUB_DEBUG_LED2 (1UL << (31 - 6))
-#define GPIO_CPUB_DEBUG_LED1 (1UL << (31 - 7))
-#define IRQ_CPUB_SD_1A (1UL << (31 - 16))
-#define IRQ_CPUB_SD_2B (1UL << (31 - 17))
-#define IRQ_CPUB_SD_2A (1UL << (31 - 18))
-#define IRQ_CPUB_SD_1B (1UL << (31 - 19))
-
-/* If it isn't CPU A then it's CPU B */
-static inline unsigned int hww1u1a_is_cpu_a(void)
-{
- return !mpc85xx_gpio_get(GPIO_CPU_ID);
-}
diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c
deleted file mode 100644
index 643ece1..0000000
--- a/board/exmeritus/hww1u1a/hww1u1a.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2009-2011 eXMeritus, A Boeing Company
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <linux/ctype.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <pca953x.h>
-
-#include "gpios.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- unsigned int gpio_high = 0;
- unsigned int gpio_low = 0;
- unsigned int gpio_in = 0;
- unsigned int i;
- struct ccsr_ddr __iomem *ddr;
-
- puts("Board: HWW-1U-1A ");
-
- /*
- * First just figure out which CPU we're on, then use that to
- * configure the lists of other GPIOs to be programmed.
- */
- mpc85xx_gpio_set_in(GPIO_CPU_ID);
- if (hww1u1a_is_cpu_a()) {
- puts("CPU A\n");
-
- /* We want to turn on some LEDs */
- gpio_high |= GPIO_CPUA_CPU_READY;
- gpio_low |= GPIO_CPUA_DEBUG_LED1;
- gpio_low |= GPIO_CPUA_DEBUG_LED2;
-
- /* Disable the unused transmitters */
- gpio_low |= GPIO_CPUA_TDIS1A;
- gpio_high |= GPIO_CPUA_TDIS1B;
- gpio_low |= GPIO_CPUA_TDIS2A;
- gpio_high |= GPIO_CPUA_TDIS2B;
- } else {
- puts("CPU B\n");
-
- /* We want to turn on some LEDs */
- gpio_high |= GPIO_CPUB_CPU_READY;
- gpio_low |= GPIO_CPUB_DEBUG_LED1;
- gpio_low |= GPIO_CPUB_DEBUG_LED2;
-
- /* Enable the appropriate receivers */
- gpio_high |= GPIO_CPUB_RMUX_SEL0A;
- gpio_high |= GPIO_CPUB_RMUX_SEL0B;
- gpio_low |= GPIO_CPUB_RMUX_SEL1A;
- gpio_low |= GPIO_CPUB_RMUX_SEL1B;
- }
-
- /* These GPIOs are common */
- gpio_in |= IRQ_I2CINT | IRQ_FANINT | IRQ_DIMM_EVENT;
- gpio_low |= GPIO_RS422_RE;
- gpio_high |= GPIO_RS422_DE;
-
- /* Ok, now go ahead and program all of those in one go */
- mpc85xx_gpio_set(gpio_high|gpio_low|gpio_in,
- gpio_high|gpio_low,
- gpio_high);
-
- /*
- * If things have been taken out of reset early (for example, by one
- * of the BDI3000 debuggers), then we need to put them back in reset
- * and delay a while before we continue.
- */
- if (mpc85xx_gpio_get(GPIO_RESETS)) {
- ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-
- puts("Debugger detected... extra device reset enabled!\n");
-
- /* Put stuff into reset and disable the DDR controller */
- mpc85xx_gpio_set_low(GPIO_RESETS);
- out_be32(&ddr->sdram_cfg, 0x00000000);
-
- puts(" Waiting 1 sec for reset...");
- for (i = 0; i < 10; i++) {
- udelay(100000);
- puts(".");
- }
- puts("\n");
- }
-
- /* Now bring everything back out of reset again */
- mpc85xx_gpio_set_high(GPIO_RESETS);
- return 0;
-}
-
-/*
- * This little shell function just returns whether or not it's CPU A.
- * It can be used to select the right device-tree when booting, etc.
- */
-int do_hww1u1a_test_cpu_a(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- if (argc > 1)
- cmd_usage(cmdtp);
-
- if (hww1u1a_is_cpu_a())
- return 0;
- else
- return 1;
-}
-U_BOOT_CMD(
- test_cpu_a, 1, 0, do_hww1u1a_test_cpu_a,
- "Test if this is CPU A (versus B) on the eXMeritus HWW-1U-1A board",
- ""
-);
-
-/* Create a prompt-like string: "uboot at HOSTNAME% " */
-#define PROMPT_PREFIX "uboot at exm"
-#define PROMPT_SUFFIX "% "
-
-/* This function returns a PS1 prompt based on the serial number */
-static char *hww1u1a_prompt;
-const char *hww1u1a_get_ps1(void)
-{
- unsigned long len, i, j;
- const char *serialnr;
-
- /* If our prompt was already set, just use that */
- if (hww1u1a_prompt)
- return hww1u1a_prompt;
-
- /* Use our serial number if present, otherwise a default */
- serialnr = getenv("serial#");
- if (!serialnr || !serialnr[0])
- serialnr = "999999-X";
-
- /*
- * We will turn the serial number into a hostname by:
- * (A) Delete all non-alphanumerics.
- * (B) Lowercase all letters.
- * (C) Prefix "exm".
- * (D) Suffix "a" for CPU A and "b" for CPU B.
- */
- for (i = 0, len = 0; serialnr[i]; i++) {
- if (isalnum(serialnr[i]))
- len++;
- }
-
- len += sizeof(PROMPT_PREFIX PROMPT_SUFFIX) + 1; /* Includes NUL */
- hww1u1a_prompt = malloc(len);
- if (!hww1u1a_prompt)
- return PROMPT_PREFIX "UNKNOWN(ENOMEM)" PROMPT_SUFFIX;
-
- /* Now actually fill it in */
- i = 0;
-
- /* Handle the prefix */
- for (j = 0; j < sizeof(PROMPT_PREFIX) - 1; j++)
- hww1u1a_prompt[i++] = PROMPT_PREFIX[j];
-
- /* Now the serial# part of the hostname */
- for (j = 0; serialnr[j]; j++)
- if (isalnum(serialnr[j]))
- hww1u1a_prompt[i++] = tolower(serialnr[j]);
-
- /* Now the CPU id ("a" or "b") */
- hww1u1a_prompt[i++] = hww1u1a_is_cpu_a() ? 'a' : 'b';
-
- /* Finally the suffix */
- for (j = 0; j < sizeof(PROMPT_SUFFIX); j++)
- hww1u1a_prompt[i++] = PROMPT_SUFFIX[j];
-
- /* This should all have added up, but just in case */
- hww1u1a_prompt[len - 1] = '\0';
-
- /* Now we're done */
- return hww1u1a_prompt;
-}
-
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
-
-int board_early_init_r(void)
-{
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap bootflash region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- if (flash_esel == -1) {
- /* very unlikely unless something is messed up */
- puts("Error: Could not find TLB for FLASH BASE\n");
- flash_esel = 2; /* give our best effort to continue */
- } else {
- /* invalidate existing TLB entry for FLASH */
- disable_tlb(flash_esel);
- }
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- struct tsec_info_struct tsec_info[4];
- struct fsl_pq_mdio_info mdio_info;
-
- SET_STD_TSEC_INFO(tsec_info[0], 1);
- SET_STD_TSEC_INFO(tsec_info[1], 2);
- SET_STD_TSEC_INFO(tsec_info[2], 3);
-
- if (hww1u1a_is_cpu_a())
- tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUA;
- else
- tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUB;
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
- fsl_pq_mdio_init(bis, &mdio_info);
-
- tsec_eth_init(bis, tsec_info, 3);
- return pci_eth_init(bis);
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = getenv_bootm_low();
- size = getenv_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
- FT_FSL_PCI_SETUP;
-}
diff --git a/board/exmeritus/hww1u1a/law.c b/board/exmeritus/hww1u1a/law.c
deleted file mode 100644
index c7dc58d..0000000
--- a/board/exmeritus/hww1u1a/law.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/exmeritus/hww1u1a/tlb.c b/board/exmeritus/hww1u1a/tlb.c
deleted file mode 100644
index 7f5a36f..0000000
--- a/board/exmeritus/hww1u1a/tlb.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2009-2010 eXMeritus, A Boeing Company
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 0 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 0 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Boot page */
- SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR,
- CONFIG_BPTR_VIRT_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-
- /* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR,
- CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_1M, 1),
-
- /*
- * W**G* - FLASH (Will be *I*G* after relocation to RAM)
- *
- * This maps both SPI FLASH chips (128MByte per chip)
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /*
- * *I*G* - PCI memory
- *
- * We have 1.5GB total PCI-E memory space to map and we want to use
- * the minimum possible number of TLB entries. Since Book-E TLB
- * entries are sized in powers of 4, we use 1GB + 256MB + 256MB.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_1G, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
- CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
- CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
- /*
- * *I*G* - PCI I/O
- *
- * This one entry covers all 3 64k PCI-E I/O windows
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT,
- CONFIG_SYS_PCIE3_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_256K, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/HWW1U1A_defconfig b/configs/HWW1U1A_defconfig
deleted file mode 100644
index 8947be2..0000000
--- a/configs/HWW1U1A_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_HWW1U1A=y
diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h
deleted file mode 100644
index 6a3a11c..0000000
--- a/include/configs/HWW1U1A.h
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Copyright 2009-2010 eXMeritus, A Boeing Company
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * HardwareWall HWW-1U-1A airborne unit configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High-level system configuration options */
-#define CONFIG_BOOKE /* Power/PowerPC Book-E */
-#define CONFIG_E500 /* e500 (Power ISA v2.03 with SPE) */
-#define CONFIG_FSL_ELBC /* FreeScale Enhanced LocalBus Cntlr */
-#define CONFIG_FSL_LAW /* FreeScale Local Access Window */
-#define CONFIG_P2020 /* FreeScale P2020 */
-#define CONFIG_HWW1U1A /* eXMeritus HardwareWall HWW-1U-1A */
-#define CONFIG_MP /* Multiprocessing support */
-#define CONFIG_HWCONFIG /* Use hwconfig from environment */
-
-#define CONFIG_L2_CACHE /* L2 cache enabled */
-#define CONFIG_BTB /* Branch predition enabled */
-
-#define CONFIG_PANIC_HANG /* No board reset on panic */
-#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r() */
-#define CONFIG_CMD_REGINFO /* Dump various CPU regs */
-
-/*
- * Allow the use of 36-bit physical addresses. Device-trees with 64-bit
- * addresses have known compatibility issues with some existing kernels.
- */
-#define CONFIG_ENABLE_36BIT_PHYS
-#define CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP 16 /* Number of entries in TLB1 */
-
-/* Reserve plenty of RAM for malloc (we have 2GB+) */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
-
-/* How much L2 cache do we map so we can use it as RAM */
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
-
-/* This is our temporary global data area just above the stack */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/* The stack grows down from the global data area */
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Enable IRQs and watchdog with a 1000Hz system decrementer */
-#define CONFIG_CMD_IRQ
-
-/* -------------------------------------------------------------------- */
-
-/*
- * Clock crystal configuration:
- * (1) SYS: 66.666MHz +/- 50ppm (drives CPU/PCI/DDR)
- * (2) CCB: Multiplier from SYS_CLK
- * (3) RTC: 25.000MHz +/- 50ppm (sampled against CCB clock)
- */
-#define CONFIG_SYS_CLK_FREQ 66666000/*Hz*/
-#define CONFIG_DDR_CLK_FREQ 66666000/*Hz*/
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff 2G DDR2 ECC SDRAM
- * 0x8000_0000 0x9fff_ffff 512M PCI-E Bus 1
- * 0xa000_0000 0xbfff_ffff 512M PCI-E Bus 2 (unused)
- * 0xc000_0000 0xdfff_ffff 512M PCI-E Bus 3
- * 0xe000_0000 0xe7ff_ffff 128M Spansion FLASH
- * 0xe800_0000 0xefff_ffff 128M Spansion FLASH
- * 0xffd0_0000 0xffd0_3fff 16K L1 boot stack (TLB0)
- * 0xffe0_0000 0xffef_ffff 1M CCSR
- * 0xffe0_5000 0xffe0_5fff 4K Enhanced LocalBus Controller
- */
-
-/* Virtual Memory Map */
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
-#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
-#define CONFIG_SYS_FLASH_BASE 0xe0000000
-#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
-#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
-#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
-#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000
-#define CONFIG_SYS_CCSRBAR 0xffe00000 /* CCSRBAR @ runtime */
-
-#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
-
-/* Physical Memory Map */
-#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull
-#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
-#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
-#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull
-#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfffd00000ull
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf /* for ASM code */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xffd00000 /* for ASM code */
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf /* for ASM code */
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW 0xffe00000 /* for ASM code */
-
-
-/* -------------------------------------------------------------------- */
-
-/* U-Boot image (MONITOR_BASE == TEXT_BASE) */
-#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc /* Top address in flash */
-#define CONFIG_SYS_TEXT_BASE 0xeff80000 /* Start of U-Boot image */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN 0x80000 /* 512kB (4 flash sectors) */
-
-/*
- * U-Boot Environment Image: The two sectors immediately below U-Boot
- * form the U-Boot environment (regular and redundant).
- */
-#define CONFIG_ENV_IS_IN_FLASH /* The environment image is stored in FLASH */
-#define CONFIG_ENV_OVERWRITE /* Allow "protected" variables to be erased */
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128kB (1 flash sector) */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-
-/* Only use 8kB of each environment sector for data */
-#define CONFIG_ENV_SIZE 0x2000 /* 8kB */
-#define CONFIG_ENV_SIZE_REDUND 0x2000 /* 8kB */
-
-
-/* -------------------------------------------------------------------- */
-
-/* Serial Console Configuration */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Echo back characters received during a serial download */
-#define CONFIG_LOADS_ECHO
-
-/* Allow a serial-download to temporarily change baud */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-
-/* -------------------------------------------------------------------- */
-
-/* PCI and PCI-Express Support */
-#define CONFIG_PCI /* Enable PCI/PCIE */
-#define CONFIG_PCI_PNP /* Scan PCI busses */
-#define CONFIG_CMD_PCI /* Enable the "pci" command */
-#define CONFIG_FSL_PCI_INIT /* Common FreeScale PCI initialization */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET /* We have PCI-E reset errata */
-#define CONFIG_SYS_PCI_64BIT /* PCI resources are 64-bit */
-#define CONFIG_PCI_SCAN_SHOW /* Display PCI scan during boot */
-
-/* Enable 2 of the 3 PCI-E controllers */
-#define CONFIG_PCIE3
-#undef CONFIG_PCIE2
-#define CONFIG_PCIE1
-
-/* Display human-readable names when initializing */
-#define CONFIG_SYS_PCIE3_NAME "Intel 82571EB"
-#define CONFIG_SYS_PCIE2_NAME "Unused"
-#define CONFIG_SYS_PCIE1_NAME "Silicon Image SIL3531"
-
-/*
- * PCI bus addresses
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
-
-
-/* -------------------------------------------------------------------- */
-
-/* Generic FreeScale hardware I2C support */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
-#define CONFIG_CMD_I2C
-
-/* DDR2 SO-RDIMM SPD EEPROM is at I2C0-0x51 */
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#define SPD_EEPROM_ADDRESS 0x51
-
-/* DS1339 RTC is at I2C0-0x68 (I know it says "DS1337", it's a DS1339) */
-#define CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_RTC_BUS_NUM 0
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-/* Turn off RTC square-wave output to save battery */
-#define CONFIG_SYS_RTC_DS1337_NOOSC
-
-/*
- * AT24C128N EEPROM at I2C0-0x53.
- *
- * That Atmel EEPROM has 128kbit of memory (16kByte) divided into 256 pages
- * of 64 bytes per page. The chip uses 2-byte addresses and has a max write
- * cycle time of 20ms according to the datasheet.
- *
- * NOTE: Our environment is stored on regular direct-attached FLASH, this
- * chip is only used as a write-protected backup for certain key settings
- * such as the serial# and macaddr values. (EG: "env import")
- */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 1 << 6 == 64 byte pages */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 21
-
-/*
- * PCA9554 is@I2C1-0x3f (I know it says "PCA953X", it's a PCA9554). You
- * must first select the I2C1 bus with "i2c dev 1" or the "pca953x" command
- * will not be able to access the chip.
- */
-#define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_SYS_I2C_PCA953X_ADDR 0x3f
-
-
-/* -------------------------------------------------------------------- */
-
-/* FreeScale DDR2/3 SDRAM Controller */
-#define CONFIG_SYS_FSL_DDR2 /* Our SDRAM slot is DDR2 */
-#define CONFIG_DDR_ECC /* Enable ECC by default */
-#define CONFIG_DDR_SPD /* Detect DDR config from SPD EEPROM */
-#define CONFIG_SPD_EEPROM /* ...why 2 config variables for this? */
-#define CONFIG_VERY_BIG_RAM /* Allow 2GB+ of RAM */
-#define CONFIG_CMD_SDRAM
-
-/* Standard P2020 DDR controller parameters */
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 2
-
-/* Make sure to tell the DDR controller to preinitialze all of RAM */
-#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-
-
-/* -------------------------------------------------------------------- */
-
-/* FLASH Memory Configuration (2x 128MB SPANSION FLASH) */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-
-/* Flash banks (2x 128MB) */
-#define FLASH0_PHYS (CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000ull)
-#define FLASH1_PHYS (CONFIG_SYS_FLASH_BASE_PHYS + 0x0000000ull)
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_MAX_FLASH_SECT 1024
-#define CONFIG_SYS_FLASH_BANKS_LIST { FLASH0_PHYS, FLASH1_PHYS }
-
-/*
- * Flash access modes and timings (values are the defaults after a RESET).
- *
- * NOTE: These could probably be optimized but are more than sufficient for
- * this particular system for the moment.
- */
-#define FLASH_BRx (BR_PS_16 | BR_MS_GPCM | BR_V)
-#define FLASH_ORx (OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \
- | OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
-
-/* Configure both flash banks */
-#define CONFIG_SYS_BR0_PRELIM (FLASH_BRx | BR_PHYS_ADDR(FLASH0_PHYS))
-#define CONFIG_SYS_BR1_PRELIM (FLASH_BRx | BR_PHYS_ADDR(FLASH1_PHYS))
-#define CONFIG_SYS_OR0_PRELIM (FLASH_ORx | OR_AM_128MB)
-#define CONFIG_SYS_OR1_PRELIM (FLASH_ORx | OR_AM_128MB)
-
-/* Flash timeouts (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000UL /* Erase (60s) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500UL /* Write (0.5s) */
-
-/* Quiet flash testing */
-#define CONFIG_SYS_FLASH_QUIET_TEST
-
-/* Make program/erase count down from 45/5 (9....8....7....) */
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-
-
-/* -------------------------------------------------------------------- */
-
-/* Ethernet Device Support */
-#define CONFIG_MII /* Enable MII PHY code */
-#define CONFIG_MII_DEFAULT_TSEC /* ??? Copied from P2020DS */
-#define CONFIG_PHY_GIGE /* Support Gigabit PHYs */
-#define CONFIG_ETHPRIME "e1000#0" /* Default to external ports */
-
-/* Turn on various helpful networking commands */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-/* On-chip FreeScale P2020 "tsec" Ethernet (oneway fibers and peer) */
-#define CONFIG_TSEC_ENET
-#define CONFIG_TSEC1
-#define CONFIG_TSEC2
-#define CONFIG_TSEC3
-#define CONFIG_TSEC1_NAME "owt0"
-#define CONFIG_TSEC2_NAME "owt1"
-#define CONFIG_TSEC3_NAME "peer"
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 3
-#define TSEC3_PHY_ADDR 4
-#define TSEC3_PHY_ADDR_CPUA 4
-#define TSEC3_PHY_ADDR_CPUB 5
-
-/* PCI-E dual-port E1000 (external ethernet ports) */
-#define CONFIG_E1000
-#define CONFIG_E1000_SPI
-#define CONFIG_E1000_SPI_GENERIC
-#define CONFIG_CMD_E1000
-
-/* We need the SPI infrastructure to poke the E1000's EEPROM */
-#define CONFIG_SPI
-#define CONFIG_SPI_X
-#define CONFIG_CMD_SPI
-#define MAX_SPI_BYTES 32
-
-
-/* -------------------------------------------------------------------- */
-
-/* USB Thumbdrive Device Support */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_USB
-
-/* Partition and Filesystem support */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-
-/* -------------------------------------------------------------------- */
-
-/* Command line configuration. */
-#define CONFIG_CMDLINE_EDITING /* Enable command editing */
-#define CONFIG_COMMAND_HISTORY /* Enable command history */
-#define CONFIG_AUTO_COMPLETE /* Enable command completion */
-#define CONFIG_SYS_LONGHELP /* Enable detailed command help */
-#define CONFIG_SYS_MAXARGS 128 /* Up to 128 command-line args */
-#define CONFIG_SYS_PBSIZE 8192 /* Allow up to 8k printed lines */
-#define CONFIG_SYS_CBSIZE 4096 /* Allow up to 4k command lines */
-#define CONFIG_SYS_BARGSIZE 4096 /* Allow up to 4k boot args */
-#define CONFIG_SYS_HUSH_PARSER /* Enable a fancier shell */
-
-/* A little extra magic here for the prompt */
-#define CONFIG_SYS_PROMPT hww1u1a_get_ps1()
-#ifndef __ASSEMBLY__
-const char *hww1u1a_get_ps1(void);
-#endif
-
-/* Include a bunch of default commands we probably want */
-#include <config_cmd_default.h>
-
-/* Other helpful shell-like commands */
-#define CONFIG_MD5
-#define CONFIG_SHA1
-#define CONFIG_CMD_MD5SUM
-#define CONFIG_CMD_SHA1SUM
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_SETEXPR
-
-
-/* -------------------------------------------------------------------- */
-
-/* Image manipulation and booting */
-
-/* We use the OpenFirmware-esque "Flattened Device Tree" */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMD_ELF
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Maximum kernel memory map */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Maximum kernel size of 64MB */
-
-/* This is the default address for commands with an optional address arg */
-#define CONFIG_LOADADDR 100000
-#define CONFIG_SYS_LOAD_ADDR 0x100000
-
-/* Test memory starting from the default load address to just below 2GB */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MEMTEST_END 0x7f000000
-
-#define CONFIG_BOOTDELAY 20
-#define CONFIG_BOOTCOMMAND "echo Not yet flashed"
-#define CONFIG_BOOTARGS ""
-#define CONFIG_BOOTARGS_DYNAMIC "console=ttyS0,${baudrate}n1"
-
-/* Extra environment parameters */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "ethprime=e1000#0\0" \
- "ethrotate=no\0" \
- "setbootargs=setenv bootargs " \
- "\"${bootargs} "CONFIG_BOOTARGS_DYNAMIC"\"\0" \
- "perf_mode=performance\0" \
- "hwconfig=" "fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;" \
- "usb1:dr_mode=host,phy_type=ulpi\0" \
- "flkernel=0xe8000000\0" \
- "flinitramfs=0xe8800000\0" \
- "fldevicetree=0xeff20000\0" \
- "flbootm=bootm ${flkernel} ${flinitramfs} ${fldevicetree}\0" \
- "flboot=run preboot; run flbootm\0" \
- "restore_eeprom=i2c dev 0 && " \
- "eeprom read $loadaddr 0x0000 0x2000 && " \
- "env import -c $loadaddr 0x2000\0"
-
-#endif /* __CONFIG_H */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 05/25] ppc: Zap IDS8247 board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (3 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 04/25] ppc: Zap HWW1U1A board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board Marek Vasut
` (19 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This board is old and is using CONFIG_I2C_X, which is wrong.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
board/ids/ids8247/Kconfig | 12 -
board/ids/ids8247/MAINTAINERS | 6 -
board/ids/ids8247/Makefile | 11 -
board/ids/ids8247/ids8247.c | 390 ---------------------------------
configs/IDS8247_defconfig | 3 -
include/configs/IDS8247.h | 462 ---------------------------------------
7 files changed, 888 deletions(-)
delete mode 100644 board/ids/ids8247/Kconfig
delete mode 100644 board/ids/ids8247/MAINTAINERS
delete mode 100644 board/ids/ids8247/Makefile
delete mode 100644 board/ids/ids8247/ids8247.c
delete mode 100644 configs/IDS8247_defconfig
delete mode 100644 include/configs/IDS8247.h
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 7f246ff..7e28170 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -52,9 +52,6 @@ config TARGET_MPC8266ADS
config TARGET_VOVPN_GW
bool "Support VoVPN-GW"
-config TARGET_IDS8247
- bool "Support IDS8247"
-
config TARGET_KM82XX
bool "Support km82xx"
@@ -75,7 +72,6 @@ source "board/ep82xxm/Kconfig"
source "board/freescale/mpc8266ads/Kconfig"
source "board/funkwerk/vovpn-gw/Kconfig"
source "board/gw8260/Kconfig"
-source "board/ids/ids8247/Kconfig"
source "board/iphase4539/Kconfig"
source "board/keymile/km82xx/Kconfig"
source "board/muas3001/Kconfig"
diff --git a/board/ids/ids8247/Kconfig b/board/ids/ids8247/Kconfig
deleted file mode 100644
index bbab727..0000000
--- a/board/ids/ids8247/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_IDS8247
-
-config SYS_BOARD
- default "ids8247"
-
-config SYS_VENDOR
- default "ids"
-
-config SYS_CONFIG_NAME
- default "IDS8247"
-
-endif
diff --git a/board/ids/ids8247/MAINTAINERS b/board/ids/ids8247/MAINTAINERS
deleted file mode 100644
index 3173cdf..0000000
--- a/board/ids/ids8247/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-IDS8247 BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: board/ids/ids8247/
-F: include/configs/IDS8247.h
-F: configs/IDS8247_defconfig
diff --git a/board/ids/ids8247/Makefile b/board/ids/ids8247/Makefile
deleted file mode 100644
index 99c47b6..0000000
--- a/board/ids/ids8247/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2005
-# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = ids8247.o
diff --git a/board/ids/ids8247/ids8247.c b/board/ids/ids8247/ids8247.c
deleted file mode 100644
index 1b2d0e0..0000000
--- a/board/ids/ids8247/ids8247.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * (C) Copyright 2005
- * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */
- /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
- /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
- /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
- /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
- /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
- /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */
-#if defined(CONFIG_SYS_I2C_SOFT)
- /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */
- /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */
-#else /* normal I/O port pins */
- /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */
- /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */
-#endif
- /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */
- /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
- /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
- /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
- /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
- /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
- /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
- /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
- /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
- /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */
- /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */
- /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */
- /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */
- /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
- /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
- /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
- /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
- /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
- /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
- /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
- /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
- /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
- /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
- /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
- /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
- /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
- /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
- /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
- /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
- /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
- /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
- /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
- /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */
- /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
- /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
- /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
- /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
- /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
- /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
- /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */
- /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */
- /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */
- /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */
- /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */
- /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */
- /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */
- /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */
- /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */
- /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */
- /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */
-#else /* normal I/O port pins */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */
- /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */
-#endif
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
- /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
- /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
- puts ("Board: IDS 8247\n");
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
- ulong orx, volatile uchar * base)
-{
- volatile uchar c = 0xff;
- volatile uint *sdmr_ptr;
- volatile uint *orx_ptr;
- ulong maxsize, size;
- int i;
-
- /* We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
- sdmr_ptr = &memctl->memc_psdmr;
- orx_ptr = &memctl->memc_or2;
-
- *orx_ptr = orx;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- *sdmr_ptr = sdmr | PSDMR_OP_PREA;
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
-
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *base = c;
-
- size = get_ram_size((long *)base, maxsize);
- *orx_ptr = orx | ~(size - 1);
-
- return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
- long psize;
-
- psize = 16 * 1024 * 1024;
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* 60x SDRAM setup:
- */
- psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
-#endif /* CONFIG_SYS_RAMBOOT */
-
- icache_enable ();
-
- return (psize);
-}
-
-int misc_init_r (void)
-{
- gd->bd->bi_flashstart = 0xff800000;
- return 0;
-}
-
-#if defined(CONFIG_CMD_NAND)
-#include <nand.h>
-#include <linux/mtd/mtd.h>
-#include <asm/io.h>
-
-static u8 hwctl;
-
-static void ids_nand_hwctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if ( ctrl & NAND_CLE ) {
- hwctl |= 0x1;
- writeb(0x00, (this->IO_ADDR_W + 0x0a));
- } else {
- hwctl &= ~0x1;
- writeb(0x00, (this->IO_ADDR_W + 0x08));
- }
- if ( ctrl & NAND_ALE ) {
- hwctl |= 0x2;
- writeb(0x00, (this->IO_ADDR_W + 0x09));
- } else {
- hwctl &= ~0x2;
- writeb(0x00, (this->IO_ADDR_W + 0x08));
- }
- if ( (ctrl & NAND_NCE) != NAND_NCE)
- writeb(0x00, (this->IO_ADDR_W + 0x0c));
- else
- writeb(0x00, (this->IO_ADDR_W + 0x08));
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-
-}
-
-static u_char ids_nand_read_byte(struct mtd_info *mtd)
-{
- struct nand_chip *this = mtd->priv;
-
- return readb(this->IO_ADDR_R);
-}
-
-static void ids_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
- struct nand_chip *nand = mtd->priv;
- int i;
-
- for (i = 0; i < len; i++) {
- if (hwctl & 0x1)
- writeb(buf[i], (nand->IO_ADDR_W + 0x02));
- else if (hwctl & 0x2)
- writeb(buf[i], (nand->IO_ADDR_W + 0x01));
- else
- writeb(buf[i], nand->IO_ADDR_W);
- }
-}
-
-static void ids_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- struct nand_chip *this = mtd->priv;
- int i;
-
- for (i = 0; i < len; i++) {
- buf[i] = readb(this->IO_ADDR_R);
- }
-}
-
-static int ids_nand_dev_ready(struct mtd_info *mtd)
-{
- /* constant delay (see also tR in the datasheet) */
- udelay(12);
- return 1;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- nand->ecc.mode = NAND_ECC_SOFT;
-
- /* Reference hardware control function */
- nand->cmd_ctrl = ids_nand_hwctrl;
- nand->read_byte = ids_nand_read_byte;
- nand->write_buf = ids_nand_write_buf;
- nand->read_buf = ids_nand_read_buf;
- nand->dev_ready = ids_nand_dev_ready;
- nand->chip_delay = 12;
-
- return 0;
-}
-
-#endif /* CONFIG_CMD_NAND */
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup( blob, bd);
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/configs/IDS8247_defconfig b/configs/IDS8247_defconfig
deleted file mode 100644
index b4dd23f..0000000
--- a/configs/IDS8247_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_IDS8247=y
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
deleted file mode 100644
index 8ccb0ff..0000000
--- a/include/configs/IDS8247.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * (C) Copyright 2005
- * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8272_FAMILY 1
-#define CONFIG_IDS8247 1
-#define CPU_ID_STR "MPC8247"
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw " \
- "console=ttyS0,115200\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- "bootfile=/tftpboot/IDS8247/uImage\0" \
- "kernel_addr=ff800000\0" \
- "ramdisk_addr=ffa00000\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_MISC_INIT_R 1
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 400000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-#define I2C_PORT 0 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00000080)
-#define I2C_TRISTATE (iop->pdir &= ~0x00000080)
-#define I2C_READ ((iop->pdat & 0x00000080) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000080; \
- else iop->pdat &= ~0x00000080
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000100; \
- else iop->pdat &= ~0x00000100
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#if 0
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_I2C_X
-#endif
-
-/*
- * select serial console configuration
- * use the extern UART for the console
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK 14745600
-
-#define CONFIG_SYS_UART_BASE 0xE0000000
-#define CONFIG_SYS_UART_SIZE 0x10000
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0x8000)
-
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc at f0000000/serial8250 at e0008000"
-
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
-#define CONFIG_ETHER_ON_FCC1
-#define FCC_ENET
-
-/*
- * - Rx-CLK is CLK10
- * - Tx-CLK is CLK9
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_BANKS_LIST { 0xFF800000 }
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0xFFF00000
-#define CONFIG_SYS_FLASH0_SIZE 8
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-/* Environment in flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x60000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-
-/*-----------------------------------------------------------------------
- * NAND-FLASH stuff
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define CONFIG_SYS_NAND0_BASE 0xE1000000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-
-#endif /* CONFIG_CMD_NAND */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- *
- * 60x SDRAM is mapped@CONFIG_SYS_SDRAM_BASE
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-#define CONFIG_SYS_HID0_FINAL 0
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR 0
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR 0
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR (0x00000028 | SCCR_DFBRG01)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 16 bit FLASH
- * 1 60x GPCM 8 bit NAND
- * 2 60x SDRAM 32 bit SDRAM
- * 3 60x GPCM 8 bit UART
- *
- */
-
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (32<<20) /* less than 32 MB */
-
-#define CONFIG_SYS_MPTPR 0x6600
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_SCY_6_CLK )
-
-#if defined(CONFIG_CMD_NAND)
-/* Bank 1 - NAND Flash
-*/
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND0_BASE
-#define CONFIG_SYS_NAND_SIZE 0x8000
-
-#define CONFIG_SYS_OR_TIMING_NAND 0x000036
-
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
-#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | CONFIG_SYS_OR_TIMING_NAND )
-#endif
-
-/* Bank 2 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT 0x20
-#define CONFIG_SYS_LSRT 0x20
-
-#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2
-
-
-/* SDRAM initialization values
-*/
-#define CONFIG_SYS_OR2 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI0_A9 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A15_A17 |\
- PSDMR_SDA10_PBI0_A10 |\
- PSDMR_RFRC_5_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_2C |\
- PSDMR_WRC_3C |\
- PSDMR_CL_3)
-
-/* Bank 3 - UART
-*/
-
-#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
-#define CONFIG_SYS_OR3_PRELIM (((-CONFIG_SYS_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )
-
-#endif /* __CONFIG_H */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (4 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 05/25] ppc: Zap IDS8247 board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 19:08 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board Marek Vasut
` (18 subsequent siblings)
24 siblings, 1 reply; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This board is old and is using CONFIG_I2C_X, which is wrong.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
board/tqc/tqm8260/Kconfig | 12 -
board/tqc/tqm8260/MAINTAINERS | 16 -
board/tqc/tqm8260/Makefile | 8 -
board/tqc/tqm8260/README | 415 --------------------------
board/tqc/tqm8260/tqm8260.c | 352 ----------------------
configs/TQM8255_AA_defconfig | 4 -
configs/TQM8260_AA_defconfig | 4 -
configs/TQM8260_AB_defconfig | 4 -
configs/TQM8260_AC_defconfig | 4 -
configs/TQM8260_AD_defconfig | 4 -
configs/TQM8260_AE_defconfig | 4 -
configs/TQM8260_AF_defconfig | 4 -
configs/TQM8260_AG_defconfig | 4 -
configs/TQM8260_AH_defconfig | 4 -
configs/TQM8260_AI_defconfig | 4 -
configs/TQM8265_AA_defconfig | 4 -
include/configs/TQM8260.h | 620 ---------------------------------------
18 files changed, 1471 deletions(-)
delete mode 100644 board/tqc/tqm8260/Kconfig
delete mode 100644 board/tqc/tqm8260/MAINTAINERS
delete mode 100644 board/tqc/tqm8260/Makefile
delete mode 100644 board/tqc/tqm8260/README
delete mode 100644 board/tqc/tqm8260/tqm8260.c
delete mode 100644 configs/TQM8255_AA_defconfig
delete mode 100644 configs/TQM8260_AA_defconfig
delete mode 100644 configs/TQM8260_AB_defconfig
delete mode 100644 configs/TQM8260_AC_defconfig
delete mode 100644 configs/TQM8260_AD_defconfig
delete mode 100644 configs/TQM8260_AE_defconfig
delete mode 100644 configs/TQM8260_AF_defconfig
delete mode 100644 configs/TQM8260_AG_defconfig
delete mode 100644 configs/TQM8260_AH_defconfig
delete mode 100644 configs/TQM8260_AI_defconfig
delete mode 100644 configs/TQM8265_AA_defconfig
delete mode 100644 include/configs/TQM8260.h
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 7e28170..e28628f 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -55,9 +55,6 @@ config TARGET_VOVPN_GW
config TARGET_KM82XX
bool "Support km82xx"
-config TARGET_TQM8260
- bool "Support TQM8260"
-
config TARGET_TQM8272
bool "Support TQM8272"
@@ -79,7 +76,6 @@ source "board/pm826/Kconfig"
source "board/pm828/Kconfig"
source "board/ppmc8260/Kconfig"
source "board/sacsng/Kconfig"
-source "board/tqc/tqm8260/Kconfig"
source "board/tqc/tqm8272/Kconfig"
endmenu
diff --git a/board/tqc/tqm8260/Kconfig b/board/tqc/tqm8260/Kconfig
deleted file mode 100644
index 90a96eb..0000000
--- a/board/tqc/tqm8260/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TQM8260
-
-config SYS_BOARD
- default "tqm8260"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM8260"
-
-endif
diff --git a/board/tqc/tqm8260/MAINTAINERS b/board/tqc/tqm8260/MAINTAINERS
deleted file mode 100644
index 266910f..0000000
--- a/board/tqc/tqm8260/MAINTAINERS
+++ /dev/null
@@ -1,16 +0,0 @@
-TQM8260 BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/tqc/tqm8260/
-F: include/configs/TQM8260.h
-F: configs/TQM8255_AA_defconfig
-F: configs/TQM8260_AA_defconfig
-F: configs/TQM8260_AB_defconfig
-F: configs/TQM8260_AC_defconfig
-F: configs/TQM8260_AD_defconfig
-F: configs/TQM8260_AE_defconfig
-F: configs/TQM8260_AF_defconfig
-F: configs/TQM8260_AG_defconfig
-F: configs/TQM8260_AH_defconfig
-F: configs/TQM8260_AI_defconfig
-F: configs/TQM8265_AA_defconfig
diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile
deleted file mode 100644
index 6b8573d..0000000
--- a/board/tqc/tqm8260/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = tqm8260.o ../tqm8xx/load_sernum_ethaddr.o
diff --git a/board/tqc/tqm8260/README b/board/tqc/tqm8260/README
deleted file mode 100644
index 93b5506..0000000
--- a/board/tqc/tqm8260/README
+++ /dev/null
@@ -1,415 +0,0 @@
-
-This file contains basic information on the port of U-Boot to TQM8260.
-All the changes fit in the common U-Boot infrastructure, providing a
-new TQM8260-specific entry in makefiles. To build U-Boot for TQM8260,
-type "make TQM8260_config", edit the "include/config_TQM8260.h" file
-if necessary, then type "make".
-
-
-Common file modifications:
---------------------------
-
-The following common files have been modified by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-MAKEALL - TQM8260 entry added
-Makefile - TQM8260_config entry added
-arch/powerpc/cpu/mpc8260/Makefile - soft_i2c.o module added
-arch/powerpc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
- bug fixed (fcr -> scr)
-arch/powerpc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
-include/flash.h - added definitions for the AM29LV640D Flash chip
-
-
-New files:
-----------
-
-The following new files have been added by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-board/tqm8260/ - board-specific directory
-board/tqm8260/Makefile - board-specific makefile
-board/tqm8260/config.mk - config file
-board/tqm8260/flash.c - flash driver (for AM29LV640D)
-board/tqm8260/ppcboot.lds - linker script
-board/tqm8260/tqm8260.c - ioport and memory initialization
-arch/powerpc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
-include/config_TQM8260.h - main configuration file
-
-
-New configuration options:
---------------------------
-
-CONFIG_TQM8260
-
- Main board-specific option (should be defined for TQM8260).
-
-CONFIG_82xx_CONS_SMC1
-
- If defined, SMC1 will be used as the console
-
-CONFIG_82xx_CONS_SMC2
-
- If defined, SMC2 will be used as the console
-
-CONFIG_SYS_INIT_LOCAL_SDRAM
-
- If defined, the SDRAM on the local bus will be initialized and
- mapped at BR2.
-
-
-Acceptance criteria tests:
---------------------------
-
-The following tests have been conducted to validate the port of U-Boot
-to TQM8260:
-
-1. Operation on serial console:
-
-With the CONFIG_82xx_CONS_SMC1 option defined in the main configuration file,
-the U-Boot output appeared on the serial terminal connected to COM1 as
-follows:
-
-------------------------------------------------------------------------------
-=> help
-go - start application at address 'addr'
-run - run commands in an environment variable
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
-rarpboot- boot image via network using RARP/TFTP protocol
-bootd - boot default, i.e., run 'bootcmd'
-loads - load S-Record file over serial line
-loadb - load binary file over serial line (kermit mode)
-md - memory display
-mm - memory modify (auto-incrementing)
-nm - memory modify (constant address)
-mw - memory write (fill)
-cp - memory copy
-cmp - memory compare
-crc32 - checksum calculation
-base - print or set address offset
-printenv- print environment variables
-setenv - set environment variables
-saveenv - save environment variables to persistent storage
-protect - enable or disable FLASH write protection
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-bdinfo - print Board Info structure
-iminfo - print header information for application image
-coninfo - print console devices and informations
-eeprom - EEPROM sub-system
-loop - infinite loop on address range
-mtest - simple RAM test
-icache - enable or disable instruction cache
-dcache - enable or disable data cache
-reset - Perform RESET of the CPU
-echo - echo args to console
-version - print monitor version
-help - print online help
-? - alias for 'help'
-=>
-------------------------------------------------------------------------------
-
-
-2. Flash driver operation
-
-The following sequence was performed to test the "flinfo" command:
-
-------------------------------------------------------------------------------
-=> flinfo
-
-Bank # 1: AMD 29LV640D (64 M, uniform sector)
- Size: 32 MB in 128 Sectors
- Sector Start Addresses:
- 40000000 40040000 (RO) 40080000 400C0000 40100000
- 40140000 40180000 401C0000 40200000 40240000
- 40280000 402C0000 40300000 40340000 40380000
- 403C0000 40400000 40440000 40480000 404C0000
- 40500000 40540000 40580000 405C0000 40600000
- 40640000 40680000 406C0000 40700000 40740000
- 40780000 407C0000 40800000 40840000 40880000
- 408C0000 40900000 40940000 40980000 409C0000
- 40A00000 40A40000 40A80000 40AC0000 40B00000
- 40B40000 40B80000 40BC0000 40C00000 40C40000
- 40C80000 40CC0000 40D00000 40D40000 40D80000
- 40DC0000 40E00000 40E40000 40E80000 40EC0000
- 40F00000 40F40000 40F80000 40FC0000 41000000
- 41040000 41080000 410C0000 41100000 41140000
- 41180000 411C0000 41200000 41240000 41280000
- 412C0000 41300000 41340000 41380000 413C0000
- 41400000 41440000 41480000 414C0000 41500000
- 41540000 41580000 415C0000 41600000 41640000
- 41680000 416C0000 41700000 41740000 41780000
- 417C0000 41800000 41840000 41880000 418C0000
- 41900000 41940000 41980000 419C0000 41A00000
- 41A40000 41A80000 41AC0000 41B00000 41B40000
- 41B80000 41BC0000 41C00000 41C40000 41C80000
- 41CC0000 41D00000 41D40000 41D80000 41DC0000
- 41E00000 41E40000 41E80000 41EC0000 41F00000
- 41F40000 41F80000 41FC0000
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the erase command:
-
-------------------------------------------------------------------------------
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff ................
-40080010: ffffffff ffffffff ffffffff ffffffff ................
-40080020: ffffffff ffffffff ffffffff ffffffff ................
-40080030: ffffffff ffffffff ffffffff ffffffff ................
-40080040: ffffffff ffffffff ffffffff ffffffff ................
-40080050: ffffffff ffffffff ffffffff ffffffff ................
-40080060: ffffffff ffffffff ffffffff ffffffff ................
-40080070: ffffffff ffffffff ffffffff ffffffff ................
-40080080: ffffffff ffffffff ffffffff ffffffff ................
-40080090: ffffffff ffffffff ffffffff ffffffff ................
-400800a0: ffffffff ffffffff ffffffff ffffffff ................
-400800b0: ffffffff ffffffff ffffffff ffffffff ................
-400800c0: ffffffff ffffffff ffffffff ffffffff ................
-400800d0: ffffffff ffffffff ffffffff ffffffff ................
-400800e0: ffffffff ffffffff ffffffff ffffffff ................
-400800f0: ffffffff ffffffff ffffffff ffffffff ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 1:2
-Erase Flash Sectors 2-2 in Bank # 1
-.. done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff ................
-40080010: ffffffff ffffffff ffffffff ffffffff ................
-40080020: ffffffff ffffffff ffffffff ffffffff ................
-40080030: ffffffff ffffffff ffffffff ffffffff ................
-40080040: ffffffff ffffffff ffffffff ffffffff ................
-40080050: ffffffff ffffffff ffffffff ffffffff ................
-40080060: ffffffff ffffffff ffffffff ffffffff ................
-40080070: ffffffff ffffffff ffffffff ffffffff ................
-40080080: ffffffff ffffffff ffffffff ffffffff ................
-40080090: ffffffff ffffffff ffffffff ffffffff ................
-400800a0: ffffffff ffffffff ffffffff ffffffff ................
-400800b0: ffffffff ffffffff ffffffff ffffffff ................
-400800c0: ffffffff ffffffff ffffffff ffffffff ................
-400800d0: ffffffff ffffffff ffffffff ffffffff ................
-400800e0: ffffffff ffffffff ffffffff ffffffff ................
-400800f0: ffffffff ffffffff ffffffff ffffffff ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> cp 0 400c0000 10
-Copy to Flash... done
-=> erase 1:2-3
-Erase Flash Sectors 2-3 in Bank # 1
-... done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff ................
-40080010: ffffffff ffffffff ffffffff ffffffff ................
-40080020: ffffffff ffffffff ffffffff ffffffff ................
-40080030: ffffffff ffffffff ffffffff ffffffff ................
-40080040: ffffffff ffffffff ffffffff ffffffff ................
-40080050: ffffffff ffffffff ffffffff ffffffff ................
-40080060: ffffffff ffffffff ffffffff ffffffff ................
-40080070: ffffffff ffffffff ffffffff ffffffff ................
-40080080: ffffffff ffffffff ffffffff ffffffff ................
-40080090: ffffffff ffffffff ffffffff ffffffff ................
-400800a0: ffffffff ffffffff ffffffff ffffffff ................
-400800b0: ffffffff ffffffff ffffffff ffffffff ................
-400800c0: ffffffff ffffffff ffffffff ffffffff ................
-400800d0: ffffffff ffffffff ffffffff ffffffff ................
-400800e0: ffffffff ffffffff ffffffff ffffffff ................
-400800f0: ffffffff ffffffff ffffffff ffffffff ................
-=> md 400c0000
-400c0000: ffffffff ffffffff ffffffff ffffffff ................
-400c0010: ffffffff ffffffff ffffffff ffffffff ................
-400c0020: ffffffff ffffffff ffffffff ffffffff ................
-400c0030: ffffffff ffffffff ffffffff ffffffff ................
-400c0040: ffffffff ffffffff ffffffff ffffffff ................
-400c0050: ffffffff ffffffff ffffffff ffffffff ................
-400c0060: ffffffff ffffffff ffffffff ffffffff ................
-400c0070: ffffffff ffffffff ffffffff ffffffff ................
-400c0080: ffffffff ffffffff ffffffff ffffffff ................
-400c0090: ffffffff ffffffff ffffffff ffffffff ................
-400c00a0: ffffffff ffffffff ffffffff ffffffff ................
-400c00b0: ffffffff ffffffff ffffffff ffffffff ................
-400c00c0: ffffffff ffffffff ffffffff ffffffff ................
-400c00d0: ffffffff ffffffff ffffffff ffffffff ................
-400c00e0: ffffffff ffffffff ffffffff ffffffff ................
-400c00f0: ffffffff ffffffff ffffffff ffffffff ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the Flash programming commands:
-
-------------------------------------------------------------------------------
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> cp 0 40080000 10
-Copy to Flash... done
-=> md 0
-00000000: 00000000 00000104 61100200 01000000 ........a.......
-00000010: 00000000 00000000 81140000 82000100 ................
-00000020: 01080000 00004000 22800000 00000600 ...... at .".......
-00000030: 00200800 00000000 10000100 00008000 . ..............
-00000040: 00812000 00000200 00020000 80000000 .. .............
-00000050: 00028001 00001000 00040400 00000200 ................
-00000060: 20480000 00000000 20090000 00142000 H...... ..... .
-00000070: 00000000 00004000 24210000 10000000 ...... at .$!......
-00000080: 02440002 10000000 00200008 00000000 .D....... ......
-00000090: 02440900 00000000 30a40000 00004400 .D......0.....D.
-000000a0: 04420800 00000000 00000040 00020000 .B......... at ....
-000000b0: 05020000 00100000 00060000 00000000 ................
-000000c0: 00400000 00000000 00080000 00040000 . at ..............
-000000d0: 10400000 00800004 00000000 00000200 . at ..............
-000000e0: 80890000 00010004 00080000 00000020 ...............
-000000f0: 08000000 10000000 00010000 00000000 ................
-=> md 40080000
-40080000: 00000000 00000104 61100200 01000000 ........a.......
-40080010: 00000000 00000000 81140000 82000100 ................
-40080020: 01080000 00004000 22800000 00000600 ...... at .".......
-40080030: 00200800 00000000 10000100 00008000 . ..............
-40080040: ffffffff ffffffff ffffffff ffffffff ................
-40080050: ffffffff ffffffff ffffffff ffffffff ................
-40080060: ffffffff ffffffff ffffffff ffffffff ................
-40080070: ffffffff ffffffff ffffffff ffffffff ................
-40080080: ffffffff ffffffff ffffffff ffffffff ................
-40080090: ffffffff ffffffff ffffffff ffffffff ................
-400800a0: ffffffff ffffffff ffffffff ffffffff ................
-400800b0: ffffffff ffffffff ffffffff ffffffff ................
-400800c0: ffffffff ffffffff ffffffff ffffffff ................
-400800d0: ffffffff ffffffff ffffffff ffffffff ................
-400800e0: ffffffff ffffffff ffffffff ffffffff ................
-400800f0: ffffffff ffffffff ffffffff ffffffff ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test storage of the environment
-variables in Flash:
-
-------------------------------------------------------------------------------
-=> setenv foo bar
-=> saveenv
-Un-Protected 1 sectors
-Erasing Flash...
-.. done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=> reset
-...
-=> printenv
-bootdelay=CONFIG_BOOTDELAY
-baudrate=9600
-ipaddr=192.168.4.7
-serverip=192.168.4.1
-ethaddr=66:55:44:33:22:11
-foo=bar
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 170/262140 bytes
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test image download and run over
-Ethernet interface (both interfaces were tested):
-
-------------------------------------------------------------------------------
-=> tftpboot 40000 hello_world.bin
-ARP broadcast 1
-TFTP from server 192.168.2.2; our IP address is 192.168.2.7
-Filename 'hello_world.bin'.
-Load address: 0x40000
-Loading: #############
-done
-Bytes transferred = 65912 (10178 hex)
-=> go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test eeprom read/write commands:
-
-------------------------------------------------------------------------------
-=> md 40000
-00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
-00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
-00040020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x
-00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
-00040040: 7c0803a6 4e800021 813f004c 7f84e378 |...N..!.?.L...x
-00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
-00040060: 7c1be000 4181003c 80bd0000 813f004c |...A..<.....?.L
-00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,... at .......
-00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
-00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
-000400a0: 813f004c 807e8010 80090010 7c0803a6 .?.L.~......|...
-000400b0: 4e800021 813f004c 80090004 7c0803a6 N..!.?.L....|...
-000400c0: 4e800021 2c030000 4182ffec 813f004c N..!,...A....?.L
-000400d0: 80090000 7c0803a6 4e800021 813f004c ....|...N..!.?.L
-000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
-000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
-=> eeprom write 40000 0 40
-
-EEPROM write: addr 00040000 off 0000 count 64 ... done
-=> mw 50000 0 1000
-=> eeprom read 50000 0 40
-
-EEPROM read: addr 00050000 off 0000 count 64 ... done
-=> md 50000
-00050000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
-00050010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
-00050020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x
-00050030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
-00050040: 00000000 00000000 00000000 00000000 ................
-00050050: 00000000 00000000 00000000 00000000 ................
-00050060: 00000000 00000000 00000000 00000000 ................
-00050070: 00000000 00000000 00000000 00000000 ................
-00050080: 00000000 00000000 00000000 00000000 ................
-00050090: 00000000 00000000 00000000 00000000 ................
-000500a0: 00000000 00000000 00000000 00000000 ................
-000500b0: 00000000 00000000 00000000 00000000 ................
-000500c0: 00000000 00000000 00000000 00000000 ................
-000500d0: 00000000 00000000 00000000 00000000 ................
-000500e0: 00000000 00000000 00000000 00000000 ................
-000500f0: 00000000 00000000 00000000 00000000 ................
-=>
-------------------------------------------------------------------------------
-
-
-Patch per Mon, 06 Aug 2001 17:57:27:
-
-- upgraded Flash support (added support for the following chips:
- AM29LV800T/B, AM29LV160T/B, AM29DL322T/B, AM29DL323T/B)
-- BCR tweakage for the 8260 bus mode
-- SIUMCR tweakage enabling the MI interrupt (IRQ7)
-
-To simplify switching between the bus modes, a new configuration
-option (CONFIG_BUSMODE_60x) has been added to the "config_TQM8260.h"
-file. If it is defined, BCR will be configured for the 60x mode,
-otherwise - for the 8260 mode.
-
-Concerning the SIUMCR modification: it's hard to predict whether it
-will induce any problems on the other (60x mode) board. However, the
-problems (if they appear) should be easy to notice - if the board
-does not boot, it's most likely caused by the DPPC configuration in
-SIUMCR.
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
deleted file mode 100644
index c361f18..0000000
--- a/board/tqc/tqm8260/tqm8260.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 *ATMTXEN */
- /* PA30 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTCA */
- /* PA29 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTSOC */
- /* PA28 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 *ATMRXEN */
- /* PA27 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRSOC */
- /* PA26 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRCA */
- /* PA25 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
- /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
- /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
- /* PA22 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
- /* PA21 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
- /* PA20 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
- /* PA19 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
- /* PA18 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
- /* PA17 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[7] */
- /* PA16 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[6] */
- /* PA15 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[5] */
- /* PA14 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[4] */
- /* PA13 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[3] */
- /* PA12 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[2] */
- /* PA11 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[1] */
- /* PA10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[0] */
- /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
- /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
- /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
- /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
- /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
- /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
- /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
- /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
- /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
- /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
- /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
- /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
- /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
- /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
- /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
- /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
- /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
- /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
- /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
- /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */
- /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
- /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
- /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
- /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
- /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
- /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
- /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
- /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
- /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
- /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SYS_I2C_SOFT)
- /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
- /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#else /* normal I/O port pins */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#endif
-#endif
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
- if (i < 0 || strncmp(buf, "TQM82", 5)) {
- puts ("### No HW ID - assuming TQM8260\n");
- return (0);
- }
-
- puts (buf);
- putc ('\n');
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
- ulong orx, volatile uchar * base)
-{
- volatile uchar c = 0xff;
- volatile uint *sdmr_ptr;
- volatile uint *orx_ptr;
- ulong maxsize, size;
- int i;
-
- /* We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff)) / 2;
-
- /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
- * we are configuring CS1 if base != 0
- */
- sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
- orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
- *orx_ptr = orx;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- *sdmr_ptr = sdmr | PSDMR_OP_PREA;
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
-
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *base = c;
-
- size = get_ram_size((long *)base, maxsize);
- *orx_ptr = orx | ~(size - 1);
-
- return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
- long size8, size9;
-#endif
- long psize, lsize;
-
- psize = 16 * 1024 * 1024;
- lsize = 0;
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0 /* Just for debugging */
-#define prt_br_or(brX,orX) do { \
- ulong start = memctl->memc_ ## brX & 0xFFFF8000; \
- ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \
- printf ("\n" \
- #brX " 0x%08x " #orX " 0x%08x " \
- "==> 0x%08lx ... 0x%08lx = %ld MB\n", \
- memctl->memc_ ## brX, memctl->memc_ ## orX, \
- start, start+sizem, (sizem+1)>>20); \
- } while (0)
- prt_br_or (br0, or0);
- prt_br_or (br1, or1);
- prt_br_or (br2, or2);
- prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* 60x SDRAM setup:
- */
- size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
-
- if (size8 < size9) {
- psize = size9;
- printf ("(60x:9COL - %ld MB, ", psize >> 20);
- } else {
- psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- printf ("(60x:8COL - %ld MB, ", psize >> 20);
- }
-
- /* Local SDRAM setup:
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
- memctl->memc_lsrt = CONFIG_SYS_LSRT;
- size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
- (uchar *) SDRAM_BASE2_PRELIM);
-
- if (size8 < size9) {
- lsize = size9;
- printf ("Local:9COL - %ld MB) using ", lsize >> 20);
- } else {
- lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- printf ("Local:8COL - %ld MB) using ", lsize >> 20);
- }
-
-#if 0
- /* Set up BR2 so that the local SDRAM goes
- * right after the 60x SDRAM
- */
- memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
- (CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
- icache_enable ();
-
- return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/configs/TQM8255_AA_defconfig b/configs/TQM8255_AA_defconfig
deleted file mode 100644
index a9f9f01..0000000
--- a/configs/TQM8255_AA_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8255,300MHz"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AA_defconfig b/configs/TQM8260_AA_defconfig
deleted file mode 100644
index b762fe4..0000000
--- a/configs/TQM8260_AA_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AB_defconfig b/configs/TQM8260_AB_defconfig
deleted file mode 100644
index 6ff8d17..0000000
--- a/configs/TQM8260_AB_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz,L2_CACHE,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AC_defconfig b/configs/TQM8260_AC_defconfig
deleted file mode 100644
index 6ff8d17..0000000
--- a/configs/TQM8260_AC_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz,L2_CACHE,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AD_defconfig b/configs/TQM8260_AD_defconfig
deleted file mode 100644
index 3f406a4..0000000
--- a/configs/TQM8260_AD_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AE_defconfig b/configs/TQM8260_AE_defconfig
deleted file mode 100644
index 1077b19..0000000
--- a/configs/TQM8260_AE_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,266MHz"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AF_defconfig b/configs/TQM8260_AF_defconfig
deleted file mode 100644
index 3f406a4..0000000
--- a/configs/TQM8260_AF_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AG_defconfig b/configs/TQM8260_AG_defconfig
deleted file mode 100644
index b0d67fa..0000000
--- a/configs/TQM8260_AG_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AH_defconfig b/configs/TQM8260_AH_defconfig
deleted file mode 100644
index 65c73e8..0000000
--- a/configs/TQM8260_AH_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,L2_CACHE,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8260_AI_defconfig b/configs/TQM8260_AI_defconfig
deleted file mode 100644
index 3f406a4..0000000
--- a/configs/TQM8260_AI_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/configs/TQM8265_AA_defconfig b/configs/TQM8265_AA_defconfig
deleted file mode 100644
index d8806c4..0000000
--- a/configs/TQM8265_AA_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MPC8265,300MHz,BUSMODE_60x"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8260=y
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
deleted file mode 100644
index 7fd12d3..0000000
--- a/include/configs/TQM8260.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Imported from global configuration:
- * CONFIG_MPC8255
- * CONFIG_MPC8265
- * CONFIG_200MHz
- * CONFIG_266MHz
- * CONFIG_300MHz
- * CONFIG_L2_CACHE
- * CONFIG_BUSMODE_60x
- */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-
-#if 0
-#define CONFIG_TQM8260 100 /* ...on a TQM8260 module Rev.100 */
-#else
-#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */
-#endif
-
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=tqm8260/uImage\0" \
- "kernel_addr=400C0000\0" \
- "ramdisk_addr=40240000\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 400000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-/* TQM8260 Rev.100 has the clock and data pins swapped (!!!) on EEPROM */
-#if (CONFIG_TQM8260 <= 100)
-
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00020000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00020000)
-#define I2C_READ ((iop->pdat & 0x00020000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#else
-
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_I2C_X
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC /* define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#ifdef CONFIG_82xx_CONS_SMC1
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#endif
-#ifdef CONFIG_82xx_CONS_SMC2
-#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
-#endif
-
-#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- *
- * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
- * X.29 connector, and FCC2 is hardwired to the X.1 connector)
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
-
-#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - RX clk is CLK11
- * - TX clk is CLK12
- */
-# define CONFIG_SYS_CMXSCR_VALUE1 (CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#if defined(CONFIG_MPC8255) || defined(CONFIG_MPC8265)
-# define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#else /* !CONFIG_MPC8255 && !CONFIG_MPC8265 */
-# ifndef CONFIG_300MHz
-# define CONFIG_8260_CLKIN 66666666 /* in Hz */
-# else
-# define CONFIG_8260_CLKIN 83333000 /* in Hz */
-# endif
-#endif /* CONFIG_MPC8255 */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH1_BASE 0x60000000
-#define CONFIG_SYS_FLASH0_SIZE 32
-#define CONFIG_SYS_FLASH1_SIZE 32
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-/* use CFI flash driver */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 0x08000
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#define __HRCW__ALL__ (HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
-
-#if defined(CONFIG_MPC8255) || defined(CONFIG_MPC8265)
-# define CONFIG_SYS_HRCW_MASTER (__HRCW__ALL__ | HRCW_MODCK_H0111)
-#else /* ! MPC8255 && !MPC8265 */
-# if defined(CONFIG_266MHz)
-# define CONFIG_SYS_HRCW_MASTER (__HRCW__ALL__ | HRCW_MODCK_H0111)
-# elif defined(CONFIG_300MHz)
-# define CONFIG_SYS_HRCW_MASTER (__HRCW__ALL__ | HRCW_MODCK_H0110)
-# else
-# define CONFIG_SYS_HRCW_MASTER (__HRCW__ALL__)
-# endif
-#endif /* CONFIG_MPC8255 */
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- *
- * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
- * is mapped@SDRAM_BASE2_PRELIM.
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#ifdef CONFIG_BUSMODE_60x
-#define CONFIG_SYS_BCR (BCR_EBM|BCR_L2C|BCR_LETM|\
- BCR_NPQM0|BCR_NPQM1|BCR_NPQM2) /* 60x mode */
-#else
-#define BCR_APD01 0x10000000
-#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#if 0
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10)
-#else
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10)
-#endif
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR 0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 64 bit FLASH
- * 1 60x SDRAM 64 bit SDRAM
- * 2 Local SDRAM 32 bit SDRAM
- *
- */
-
- /* Initialize SDRAM on local bus
- */
-#define CONFIG_SYS_INIT_LOCAL_SDRAM
-
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */
-#define CONFIG_SYS_LOCAL_SDRAM_LIMIT (128<<20) /* less than 128 MB */
-
-#define CONFIG_SYS_MPTPR 0x4000
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- * In fact, the address is rather configuration data presented to the SDRAM on
- * its address lines. Because the address lines may be mux'ed externally either
- * for 8 column or 9 column devices, some bits appear twice in the 8260's
- * address:
- *
- * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length |
- * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 |
- * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 |
- * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 |
- * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 |
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV1 |\
- ORxG_SCY_3_CLK |\
- ORxG_EHTR |\
- ORxG_TRLX)
-
- /* SDRAM on TQM8260 can have either 8 or 9 columns.
- * The number affects configuration values.
- */
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT 0x20
-#define CONFIG_SYS_LSRT 0x20
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL
-
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A7 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A5 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A7 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
-/* Bank 2 - Local bus SDRAM
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_SDRAM_L |\
- BRx_V)
-
-#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL
-
-#define SDRAM_BASE2_PRELIM 0x80000000
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR2_8COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A8 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_LSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A9 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR2_9COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A6 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_LSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#endif /* __CONFIG_H */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (5 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 19:08 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom Marek Vasut
` (17 subsequent siblings)
24 siblings, 1 reply; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This board is old and is using CONFIG_I2C_X, which is wrong.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
arch/powerpc/cpu/mpc8260/pci.c | 2 -
board/tqc/tqm8272/Kconfig | 12 -
board/tqc/tqm8272/MAINTAINERS | 6 -
board/tqc/tqm8272/Makefile | 8 -
board/tqc/tqm8272/nand.c | 264 -----------
board/tqc/tqm8272/tqm8272.c | 944 ---------------------------------------
board/tqc/tqm8272/tqm8272.h | 37 --
configs/TQM8272_defconfig | 3 -
include/configs/TQM8272.h | 735 ------------------------------
10 files changed, 2015 deletions(-)
delete mode 100644 board/tqc/tqm8272/Kconfig
delete mode 100644 board/tqc/tqm8272/MAINTAINERS
delete mode 100644 board/tqc/tqm8272/Makefile
delete mode 100644 board/tqc/tqm8272/nand.c
delete mode 100644 board/tqc/tqm8272/tqm8272.c
delete mode 100644 board/tqc/tqm8272/tqm8272.h
delete mode 100644 configs/TQM8272_defconfig
delete mode 100644 include/configs/TQM8272.h
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index e28628f..2541400 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -55,9 +55,6 @@ config TARGET_VOVPN_GW
config TARGET_KM82XX
bool "Support km82xx"
-config TARGET_TQM8272
- bool "Support TQM8272"
-
endchoice
source "board/atc/Kconfig"
@@ -76,6 +73,5 @@ source "board/pm826/Kconfig"
source "board/pm828/Kconfig"
source "board/ppmc8260/Kconfig"
source "board/sacsng/Kconfig"
-source "board/tqc/tqm8272/Kconfig"
endmenu
diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c
index 0a47fdc..f7bb05d 100644
--- a/arch/powerpc/cpu/mpc8260/pci.c
+++ b/arch/powerpc/cpu/mpc8260/pci.c
@@ -262,8 +262,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
| SIUMCR_CS10PC00
| SIUMCR_BCTLC00
| SIUMCR_MMR11;
-#elif defined(CONFIG_TQM8272)
-/* nothing to do for this Board here */
#else
/*
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
diff --git a/board/tqc/tqm8272/Kconfig b/board/tqc/tqm8272/Kconfig
deleted file mode 100644
index 7b5cd8b..0000000
--- a/board/tqc/tqm8272/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TQM8272
-
-config SYS_BOARD
- default "tqm8272"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM8272"
-
-endif
diff --git a/board/tqc/tqm8272/MAINTAINERS b/board/tqc/tqm8272/MAINTAINERS
deleted file mode 100644
index 988d2b1..0000000
--- a/board/tqc/tqm8272/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TQM8272 BOARD
-#M: -
-S: Maintained
-F: board/tqc/tqm8272/
-F: include/configs/TQM8272.h
-F: configs/TQM8272_defconfig
diff --git a/board/tqc/tqm8272/Makefile b/board/tqc/tqm8272/Makefile
deleted file mode 100644
index 8bf0241..0000000
--- a/board/tqc/tqm8272/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = tqm8272.o ../tqm8xx/load_sernum_ethaddr.o nand.o
diff --git a/board/tqc/tqm8272/nand.c b/board/tqc/tqm8272/nand.c
deleted file mode 100644
index 7fb2dfa..0000000
--- a/board/tqc/tqm8272/nand.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#include "tqm8272.h"
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const uint upmTable67[] =
-{
- /* Offset UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
- /* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
- /* 0x18 */ 0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
- /* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const uint upmTable100[] =
-{
- /* Offset UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
- /* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
- /* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
- /* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const uint upmTable133[] =
-{
- /* Offset UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
- /* 0x04 */ 0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
- /* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
- /* 0x1C */ 0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-static int chipsel = 0;
-
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-#include <linux/mtd/mtd.h>
-
-static u8 hwctl = 0;
-
-static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-
- if (hwctl & 0x1) {
- WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS);
- } else if (hwctl & 0x2) {
- WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS);
- } else {
- WRITE_NAND(byte, base);
- }
-}
-
-static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- if ( ctrl & NAND_CLE )
- hwctl |= 0x1;
- else
- hwctl &= ~0x1;
- if ( ctrl & NAND_ALE )
- hwctl |= 0x2;
- else
- hwctl &= ~0x2;
- }
- if (cmd != NAND_CMD_NONE)
- upmnand_write_byte (mtd, cmd);
-}
-
-static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
-{
- struct nand_chip *this = mtdinfo->priv;
- ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-
- return READ_NAND(base);
-}
-
-static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
-{
- /* constant delay (see also tR in the datasheet) */
- udelay(12); \
- return 1;
-}
-
-#ifndef CONFIG_NAND_SPL
-static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
- struct nand_chip *this = mtdinfo->priv;
- unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
- int i;
-
- for (i = 0; i< len; i++)
- buf[i] = *base;
-}
-
-static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
- struct nand_chip *this = mtdinfo->priv;
- unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
- int i;
-
- for (i = 0; i< len; i++)
- *base = buf[i];
-}
-
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
- struct nand_chip *this = mtdinfo->priv;
- unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
- int i;
-
- for (i = 0; i < len; i++)
- if (buf[i] != *base)
- return -1;
- return 0;
-}
-#endif
-#endif /* #ifndef CONFIG_NAND_SPL */
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
- chipsel = chip;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- static int UpmInit = 0;
- volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
-
- if (hwinf.nand == 0) return -1;
-
- /* Setup the UPM */
- if (UpmInit == 0) {
- switch (hwinf.busclk_real) {
- case 100000000:
- upmconfig (UPMB, (uint *) upmTable100,
- sizeof (upmTable100) / sizeof (uint));
- break;
- case 133333333:
- upmconfig (UPMB, (uint *) upmTable133,
- sizeof (upmTable133) / sizeof (uint));
- break;
- default:
- upmconfig (UPMB, (uint *) upmTable67,
- sizeof (upmTable67) / sizeof (uint));
- break;
- }
- UpmInit = 1;
- }
-
- /* Setup the memctrl */
- memctl->memc_or3 = CONFIG_SYS_NAND_OR;
- memctl->memc_br3 = CONFIG_SYS_NAND_BR;
- memctl->memc_mbmr = (MxMR_OP_NORM);
-
- nand->ecc.mode = NAND_ECC_SOFT;
-
- nand->cmd_ctrl = upmnand_hwcontrol;
- nand->read_byte = upmnand_read_byte;
- nand->dev_ready = tqm8272_dev_ready;
-
-#ifndef CONFIG_NAND_SPL
- nand->write_buf = tqm8272_write_buf;
- nand->read_buf = tqm8272_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
- nand->verify_buf = tqm8272_verify_buf;
-#endif
-#endif
-
- /*
- * Select required NAND chip
- */
- board_nand_select_device(nand, 0);
- return 0;
-}
-
-#endif
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
deleted file mode 100644
index d650868..0000000
--- a/board/tqc/tqm8272/tqm8272.c
+++ /dev/null
@@ -1,944 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#include <command.h>
-#include <netdev.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/m8260_pci.h>
-#endif
-#include "tqm8272.h"
-
-#if 0
-#define deb_printf(fmt,arg...) \
- printf ("TQM8272 %s %s: " fmt,__FILE__, __FUNCTION__, ##arg)
-#else
-#define deb_printf(fmt,arg...) \
- do { } while (0)
-#endif
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-unsigned long board_get_cpu_clk_f (void);
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 *ATMTXEN */
- /* PA30 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTCA */
- /* PA29 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTSOC */
- /* PA28 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 *ATMRXEN */
- /* PA27 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRSOC */
- /* PA26 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRCA */
- /* PA25 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
- /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
- /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
- /* PA22 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
- /* PA21 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
- /* PA20 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
- /* PA19 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
- /* PA18 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
- /* PA17 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[7] */
- /* PA16 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[6] */
- /* PA15 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[5] */
- /* PA14 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[4] */
- /* PA13 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[3] */
- /* PA12 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[2] */
- /* PA11 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[1] */
- /* PA10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[0] */
- /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
- /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
- /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
- /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
- /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
- /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
- /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
- /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
- /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
- /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
- /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
- /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
- /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
- /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
- /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
- /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
- /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
- /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
- /* PC17 */ { 1, 0, 0, 1, 0, 0 }, /* PC17 MDC */
- /* PC16 */ { 1, 0, 0, 0, 0, 0 }, /* PC16 MDIO*/
- /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
- /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
- /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* PC10 */
- /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* PC9 */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* PC5 SMC1 TXD */
- /* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* PC4 SMC1 RXD */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
- /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
- /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
- /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
- /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
- /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
- /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SYS_I2C_SOFT)
- /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
- /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#else /* normal I/O port pins */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#endif
-#endif
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/* UPM pattern for slow init */
-static const uint upmTableSlow[] =
-{
- /* Offset UPM Read Single RAM array entry */
- /* 0x00 */ 0xffffee00, 0x00ffcc80, 0x00ffcf00, 0x00ffdc00,
- /* 0x04 */ 0x00ffce80, 0x00ffcc00, 0x00ffee00, 0x3fffcc07,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry */
- /* 0x18 */ 0xffffee00, 0x00ffec80, 0x00ffef00, 0x00fffc80,
- /* 0x1C */ 0x00fffe00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for fast init */
-static const uint upmTableFast[] =
-{
- /* Offset UPM Read Single RAM array entry */
- /* 0x00 */ 0xffffee00, 0x00ffcc80, 0x00ffcd80, 0x00ffdc00,
- /* 0x04 */ 0x00ffdc00, 0x00ffcf00, 0x00ffec00, 0x3fffcc07,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> unused */
- /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry */
- /* 0x18 */ 0xffffee00, 0x00ffec80, 0x00ffee80, 0x00fffc00,
- /* 0x1C */ 0x00fffc00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
- char *p = (char *) HWIB_INFO_START_ADDR;
-
- puts ("Board: ");
- if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
- puts (p);
- } else {
- puts ("No HWIB assuming TQM8272");
- }
- putc ('\n');
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-static int get_cas_latency (void)
-{
- /* get it from the option -ts in CIB */
- /* default is 3 */
- int ret = 3;
- int pos = 0;
- char *p = (char *) CIB_INFO_START_ADDR;
-
- while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
- if (*p < ' ' || *p > '~') { /* ASCII strings! */
- return ret;
- }
- if (*p == '-') {
- if ((p[1] == 't') && (p[2] == 's')) {
- return (p[4] - '0');
- }
- }
- p++;
- pos++;
- }
- return ret;
-}
-#endif
-
-static ulong set_sdram_timing (volatile uint *sdmr_ptr, ulong sdmr, int col)
-{
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- int clk = board_get_cpu_clk_f ();
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- int busmode = (immr->im_siu_conf.sc_bcr & BCR_EBM ? 1 : 0);
- int cas;
-
- sdmr = sdmr & ~(PSDMR_RFRC_MSK | PSDMR_PRETOACT_MSK | PSDMR_WRC_MSK | \
- PSDMR_BUFCMD);
- if (busmode) {
- switch (clk) {
- case 66666666:
- sdmr |= (PSDMR_RFRC_66MHZ_60X | \
- PSDMR_PRETOACT_66MHZ_60X | \
- PSDMR_WRC_66MHZ_60X | \
- PSDMR_BUFCMD_66MHZ_60X);
- break;
- case 100000000:
- sdmr |= (PSDMR_RFRC_100MHZ_60X | \
- PSDMR_PRETOACT_100MHZ_60X | \
- PSDMR_WRC_100MHZ_60X | \
- PSDMR_BUFCMD_100MHZ_60X);
- break;
-
- }
- } else {
- switch (clk) {
- case 66666666:
- sdmr |= (PSDMR_RFRC_66MHZ_SINGLE | \
- PSDMR_PRETOACT_66MHZ_SINGLE | \
- PSDMR_WRC_66MHZ_SINGLE | \
- PSDMR_BUFCMD_66MHZ_SINGLE);
- break;
- case 100000000:
- sdmr |= (PSDMR_RFRC_100MHZ_SINGLE | \
- PSDMR_PRETOACT_100MHZ_SINGLE | \
- PSDMR_WRC_100MHZ_SINGLE | \
- PSDMR_BUFCMD_100MHZ_SINGLE);
- break;
- case 133333333:
- sdmr |= (PSDMR_RFRC_133MHZ_SINGLE | \
- PSDMR_PRETOACT_133MHZ_SINGLE | \
- PSDMR_WRC_133MHZ_SINGLE | \
- PSDMR_BUFCMD_133MHZ_SINGLE);
- break;
- }
- }
- cas = get_cas_latency();
- sdmr &=~ (PSDMR_CL_MSK | PSDMR_LDOTOPRE_MSK);
- sdmr |= cas;
- sdmr |= ((cas - 1) << 6);
- return sdmr;
-#else
- return sdmr;
-#endif
-}
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
- ulong orx, volatile uchar * base, int col)
-{
- volatile uchar c = 0xff;
- volatile uint *sdmr_ptr;
- volatile uint *orx_ptr;
- ulong maxsize, size;
- int i;
-
- /* We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff)) / 2;
-
- /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
- * we are configuring CS1 if base != 0
- */
- sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
- orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
- *orx_ptr = orx;
- sdmr = set_sdram_timing (sdmr_ptr, sdmr, col);
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- *sdmr_ptr = sdmr | PSDMR_OP_PREA;
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
-
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *base = c;
-
- size = get_ram_size((long *)base, maxsize);
- *orx_ptr = orx | ~(size - 1);
-
- return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
- long size8, size9;
-#endif
- long psize;
-
- psize = 16 * 1024 * 1024;
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* 60x SDRAM setup:
- */
- size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
- size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE, 9);
-
- if (size8 < size9) {
- psize = size9;
- printf ("(60x:9COL - %ld MB, ", psize >> 20);
- } else {
- psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
- printf ("(60x:8COL - %ld MB, ", psize >> 20);
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- icache_enable ();
-
- return (psize);
-}
-
-
-static inline int scanChar (char *p, int len, unsigned long *number)
-{
- int akt = 0;
-
- *number = 0;
- while (akt < len) {
- if ((*p >= '0') && (*p <= '9')) {
- *number *= 10;
- *number += *p - '0';
- p += 1;
- } else {
- if (*p == '-') return akt;
- return -1;
- }
- akt ++;
- }
- return akt;
-}
-
-static int dump_hwib(void)
-{
- HWIB_INFO *hw = &hwinf;
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- if (i < 0)
- buf[0] = '\0';
-
- if (hw->OK) {
- printf ("HWIB on %x\n", HWIB_INFO_START_ADDR);
- printf ("serial : %s\n", buf);
- printf ("ethaddr: %s\n", hw->ethaddr);
- printf ("FLASH : %x nr:%d\n", hw->flash, hw->flash_nr);
- printf ("RAM : %x cs:%d\n", hw->ram, hw->ram_cs);
- printf ("CPU : %lu\n", hw->cpunr);
- printf ("CAN : %d\n", hw->can);
- if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom);
- else printf ("No EEprom\n");
- if (hw->nand) {
- printf ("NAND : %x\n", hw->nand);
- printf ("NAND CS: %d\n", hw->nand_cs);
- } else { printf ("No NAND\n");}
- printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII"));
- printf (" real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \
- "60x" : "Single PQII"));
- printf ("Option : %lx\n", hw->option);
- printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no"));
- printf ("CPM Clk: %d\n", hw->cpmcl);
- printf ("CPU Clk: %d\n", hw->cpucl);
- printf ("Bus Clk: %d\n", hw->buscl);
- if (hw->busclk_real_ok) {
- printf (" real Clk: %d\n", hw->busclk_real);
- }
- printf ("CAS : %d\n", get_cas_latency());
- } else {
- printf("HWIB @%x not OK\n", HWIB_INFO_START_ADDR);
- }
- return 0;
-}
-
-static inline int search_real_busclk (int *clk)
-{
- int part = 0, pos = 0;
- char *p = (char *) CIB_INFO_START_ADDR;
- int ok = 0;
-
- while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
- if (*p < ' ' || *p > '~') { /* ASCII strings! */
- return 0;
- }
- switch (part) {
- default:
- if (*p == '-') {
- ++part;
- }
- break;
- case 3:
- if (*p == '-') {
- ++part;
- break;
- }
- if (*p == 'b') {
- ok = 1;
- p++;
- break;
- }
- if (ok) {
- switch (*p) {
- case '6':
- *clk = 66666666;
- return 1;
- break;
- case '1':
- if (p[1] == '3') {
- *clk = 133333333;
- } else {
- *clk = 100000000;
- }
- return 1;
- break;
- }
- }
- break;
- }
- p++;
- }
- return 0;
-}
-
-int analyse_hwib (void)
-{
- char *p = (char *) HWIB_INFO_START_ADDR;
- int anz;
- int part = 1, i = 0, pos = 0;
- HWIB_INFO *hw = &hwinf;
-
- deb_printf(" %s pointer: %p\n", __FUNCTION__, p);
- /* Head = TQM */
- if (*((unsigned long *)p) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
- deb_printf("No HWIB\n");
- return -1;
- }
- p += 3;
- if (scanChar (p, 4, &hw->cpunr) < 0) {
- deb_printf("No CPU\n");
- return -2;
- }
- p +=4;
-
- hw->flash = 0x200000 << (*p - 'A');
- p++;
- hw->flash_nr = *p - '0';
- p++;
-
- hw->ram = 0x2000000 << (*p - 'A');
- p++;
- if (*p == '2') {
- hw->ram_cs = 2;
- p++;
- }
-
- if (*p == 'A') hw->can = 1;
- if (*p == 'B') hw->can = 2;
- p +=1;
- p +=1; /* connector */
- if (*p != '0') {
- hw->eeprom = 0x1000 << (*p - 'A');
- }
- p++;
-
- if ((*p < '0') || (*p > '9')) {
- /* NAND before z-option */
- hw->nand = 0x8000000 << (*p - 'A');
- p++;
- hw->nand_cs = *p - '0';
- p += 2;
- }
- /* z-option */
- anz = scanChar (p, 4, &hw->option);
- if (anz < 0) {
- deb_printf("No option\n");
- return -3;
- }
- if (hw->option & 0x8) hw->Bus = 1;
- p += anz;
- if (*p != '-') {
- deb_printf("No -\n");
- return -4;
- }
- p++;
- /* C option */
- if (*p == 'E') {
- hw->SecEng = 1;
- p++;
- }
- switch (*p) {
- case 'M': hw->cpucl = 266666666;
- break;
- case 'P': hw->cpucl = 300000000;
- break;
- case 'T': hw->cpucl = 400000000;
- break;
- default:
- deb_printf("No CPU Clk: %c\n", *p);
- return -5;
- break;
- }
- p++;
- switch (*p) {
- case 'I': hw->cpmcl = 200000000;
- break;
- case 'M': hw->cpmcl = 300000000;
- break;
- default:
- deb_printf("No CPM Clk\n");
- return -6;
- break;
- }
- p++;
- switch (*p) {
- case 'B': hw->buscl = 66666666;
- break;
- case 'E': hw->buscl = 100000000;
- break;
- case 'F': hw->buscl = 133333333;
- break;
- default:
- deb_printf("No BUS Clk\n");
- return -7;
- break;
- }
- p++;
-
- hw->OK = 1;
- /* search MAC Address */
- while ((*p != '\0') && (pos < CONFIG_SYS_HWINFO_SIZE)) {
- if (*p < ' ' || *p > '~') { /* ASCII strings! */
- return 0;
- }
- switch (part) {
- default:
- if (*p == ' ') {
- ++part;
- i = 0;
- }
- break;
- case 3: /* Copy MAC address */
- if (*p == ' ') {
- ++part;
- i = 0;
- break;
- }
- hw->ethaddr[i++] = *p;
- if ((i % 3) == 2)
- hw->ethaddr[i++] = ':';
- break;
-
- }
- p++;
- }
-
- hw->busclk_real_ok = search_real_busclk (&hw->busclk_real);
- return 0;
-}
-
-#if defined(CONFIG_GET_CPU_STR_F)
-/* !! This routine runs from Flash */
-char get_cpu_str_f (char *buf)
-{
- char *p = (char *) HWIB_INFO_START_ADDR;
- int i = 0;
-
- buf[i++] = 'M';
- buf[i++] = 'P';
- buf[i++] = 'C';
- if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
- buf[i++] = *&p[3];
- buf[i++] = *&p[4];
- buf[i++] = *&p[5];
- buf[i++] = *&p[6];
- } else {
- buf[i++] = '8';
- buf[i++] = '2';
- buf[i++] = '7';
- buf[i++] = 'x';
- }
- buf[i++] = 0;
- return 0;
-}
-#endif
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-/* !! This routine runs from Flash */
-unsigned long board_get_cpu_clk_f (void)
-{
- char *p = (char *) HWIB_INFO_START_ADDR;
- int i = 0;
-
- if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
- if (search_real_busclk (&i))
- return i;
- }
- return CONFIG_8260_CLKIN;
-}
-#endif
-
-#if CONFIG_BOARD_EARLY_INIT_R
-
-static int can_test (unsigned long off)
-{
- volatile unsigned char *base = (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
-
- *(base + 0x17) = 'T';
- *(base + 0x18) = 'Q';
- *(base + 0x19) = 'M';
- if ((*(base + 0x17) != 'T') ||
- (*(base + 0x18) != 'Q') ||
- (*(base + 0x19) != 'M')) {
- return 0;
- }
- return 1;
-}
-
-static int can_config_one (unsigned long off)
-{
- volatile unsigned char *ctrl = (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
- volatile unsigned char *cpu_if = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x02);
- volatile unsigned char *clkout = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x1f);
- unsigned char temp;
-
- *cpu_if = 0x45;
- temp = *ctrl;
- temp |= 0x40;
- *ctrl = temp;
- *clkout = 0x20;
- temp = *ctrl;
- temp &= ~0x40;
- *ctrl = temp;
- return 0;
-}
-
-static int can_config (void)
-{
- int ret = 0;
- can_config_one (0);
- if (hwinf.can == 2) {
- can_config_one (0x100);
- }
- /* make Test if they really there */
- ret += can_test (0);
- ret += can_test (0x100);
- return ret;
-}
-
-static int init_can (void)
-{
- volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
- int count = 0;
-
- if ((hwinf.OK) && (hwinf.can)) {
- memctl->memc_or4 = CONFIG_SYS_CAN_OR;
- memctl->memc_br4 = CONFIG_SYS_CAN_BR;
- /* upm Init */
- upmconfig (UPMC, (uint *) upmTableFast,
- sizeof (upmTableFast) / sizeof (uint));
- memctl->memc_mcmr = (MxMR_DSx_3_CYCL |
- MxMR_GPL_x4DIS |
- MxMR_RLFx_2X |
- MxMR_WLFx_2X |
- MxMR_OP_NORM);
- /* can configure */
- count = can_config ();
- printf ("CAN: %d @ %x\n", count, CONFIG_SYS_CAN_BASE);
- if (hwinf.can != count) printf("!!! difference to HWIB\n");
- } else {
- printf ("CAN: No\n");
- }
- return 0;
-}
-
-int board_early_init_r(void)
-{
- analyse_hwib ();
- init_can ();
- return 0;
-}
-#endif
-
-int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- dump_hwib ();
- return 0;
-}
-
-U_BOOT_CMD(
- hwib, 1, 1, do_hwib_dump,
- "dump HWIB'",
- ""
-);
-
-#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-static int get_flash_timing (void)
-{
- /* get it from the option -tf in CIB */
- /* default is 0x00000c84 */
- int ret = 0x00000c84;
- int pos = 0;
- int nr = 0;
- char *p = (char *) CIB_INFO_START_ADDR;
-
- while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
- if (*p < ' ' || *p > '~') { /* ASCII strings! */
- return ret;
- }
- if (*p == '-') {
- if ((p[1] == 't') && (p[2] == 'f')) {
- p += 6;
- ret = 0;
- while (nr < 8) {
- if ((*p >= '0') && (*p <= '9')) {
- ret *= 0x10;
- ret += *p - '0';
- p += 1;
- nr ++;
- } else if ((*p >= 'A') && (*p <= 'F')) {
- ret *= 10;
- ret += *p - '7';
- p += 1;
- nr ++;
- } else {
- if (nr < 8) return 0x00000c84;
- return ret;
- }
- }
- }
- }
- p++;
- pos++;
- }
- return ret;
-}
-
-/* Update the Flash_Size and the Flash Timing */
-int update_flash_size (int flash_size)
-{
- volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
- unsigned long reg;
- unsigned long tim;
-
- /* I must use reg, otherwise the board hang */
- reg = memctl->memc_or0;
- reg &= ~ORxU_AM_MSK;
- reg |= MEG_TO_AM(flash_size >> 20);
- tim = get_flash_timing ();
- reg &= ~0xfff;
- reg |= (tim & 0xfff);
- memctl->memc_or0 = reg;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-int board_early_init_f (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
- return 0;
-}
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc8250_init(&hose);
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/tqc/tqm8272/tqm8272.h b/board/tqc/tqm8272/tqm8272.h
deleted file mode 100644
index 1eeaf0e..0000000
--- a/board/tqc/tqm8272/tqm8272.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _TQM8272_HEADER_H
-#define _TQM8272_HEADER_H
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-typedef struct{
- int Bus;
- int flash;
- int flash_nr;
- int ram;
- int ram_cs;
- int nand;
- int nand_cs;
- int eeprom;
- int can;
- unsigned long cpunr;
- unsigned long option;
- int SecEng;
- int cpucl;
- int cpmcl;
- int buscl;
- int busclk_real_ok;
- int busclk_real;
- unsigned char OK;
- unsigned char ethaddr[20];
-} HWIB_INFO;
-
-static HWIB_INFO hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
- 0, 0, 0, 0, 0, 0};
-#endif /* __CONFIG_H */
diff --git a/configs/TQM8272_defconfig b/configs/TQM8272_defconfig
deleted file mode 100644
index 0070baf..0000000
--- a/configs/TQM8272_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_TQM8272=y
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
deleted file mode 100644
index 9c7e163..0000000
--- a/include/configs/TQM8272.h
+++ /dev/null
@@ -1,735 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8272_FAMILY 1
-#define CONFIG_TQM8272 1
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_GET_CPU_STR_F 1 /* Get the CPU ID STR */
-#define CONFIG_BOARD_GET_CPU_CLK_F 1 /* Get the CLKIN from board fct */
-
-#define STK82xx_150 1 /* on a STK82xx.150 */
-
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BOARD_EARLY_INIT_R 1
-
-#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE 230400
-#else
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consdev=ttyCPM0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "hostname=tqm8272\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=$(consdev),$(baudrate)\0" \
- "flash_nfs=run nfsargs addip addcons;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addcons;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 300000 ${bootfile};" \
- "run nfsargs addip addcons;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- "bootfile=/tftpboot/tqm8272/uImage\0" \
- "kernel_addr=40080000\0" \
- "ramdisk_addr=40100000\0" \
- "load=tftp 300000 /tftpboot/tqm8272/u-boot.bin\0" \
- "update=protect off 40000000 4003ffff;era 40000000 4003ffff;" \
- "cp.b 300000 40000000 40000;" \
- "setenv filesize;saveenv\0" \
- "cphwib=cp.b 4003fc00 33fc00 400\0" \
- "upd=run load cphwib update\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_I2C 1
-
-#if CONFIG_I2C
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 400000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_I2C_X
-
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
-
-/* I2C RTC */
-#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP 70
-#define CONFIG_SYS_DTT_LOW_TEMP -30
-#define CONFIG_SYS_DTT_HYSTERESIS 3
-
-#else
-#undef CONFIG_SYS_I2C
-#undef CONFIG_HARD_I2C
-#undef CONFIG_SYS_I2C_SOFT
-#endif
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC /* define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#ifdef CONFIG_82xx_CONS_SMC1
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#endif
-#ifdef CONFIG_82xx_CONS_SMC2
-#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
-#endif
-
-#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- *
- * (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
- * X.29 connector, and FCC2 is hardwired to the X.1 connector)
- */
-#define CONFIG_SYS_FCC_ETHERNET
-
-#if defined(CONFIG_SYS_FCC_ETHERNET)
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
-#else
-#define CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
-#endif
-
-#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - RX clk is CLK11
- * - TX clk is CLK12
- */
-# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 2 /* Port C */
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-#if STK82xx_150
-#define CONFIG_SYS_MDIO_PIN 0x00008000 /* PC16 */
-#define CONFIG_SYS_MDC_PIN 0x00004000 /* PC17 */
-#endif
-
-#if STK82xx_100
-#define CONFIG_SYS_MDIO_PIN 0x00000002 /* PC30 */
-#define CONFIG_SYS_MDC_PIN 0x00000001 /* PC31 */
-#endif
-
-#if 1
-#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDC_PIN
-#else
-#define MDIO_ACTIVE ({unsigned long tmp; tmp = iop->pdir; tmp |= CONFIG_SYS_MDIO_PIN; iop->pdir = tmp;})
-#define MDIO_TRISTATE ({unsigned long tmp; tmp = iop->pdir; tmp &= ~CONFIG_SYS_MDIO_PIN; iop->pdir = tmp;})
-#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit) if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |= CONFIG_SYS_MDIO_PIN; iop->pdat = tmp;}\
- else {unsigned long tmp; tmp = iop->pdat; tmp &= ~CONFIG_SYS_MDIO_PIN; iop->pdat = tmp;}
-
-#define MDC(bit) if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |= CONFIG_SYS_MDC_PIN; iop->pdat = tmp;}\
- else {unsigned long tmp; tmp = iop->pdat; tmp &= ~CONFIG_SYS_MDC_PIN; iop->pdat = tmp;}
-#endif
-
-#define MIIDELAY udelay(1)
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-
-#if CONFIG_I2C
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_DATE
- #define CONFIG_CMD_DTT
- #define CONFIG_CMD_EEPROM
-#endif
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if 0
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */
-
-#define CONFIG_SYS_RESET_ADDRESS 0x40000104 /* "bad" address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * CAN stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_CAN_BASE 0x51000000
-#define CONFIG_SYS_CAN_SIZE 1
-#define CONFIG_SYS_CAN_BR ((CONFIG_SYS_CAN_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMC |\
- BRx_V)
-
-#define CONFIG_SYS_CAN_OR (MEG_TO_AM(CONFIG_SYS_CAN_SIZE) |\
- ORxU_BI)
-
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8272/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH0_SIZE 32 /* 32 MB */
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver*/
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-#define CONFIG_SYS_UPDATE_FLASH_SIZE
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND 0x20000
-
-/* Where is the Hardwareinformation Block (from Monitor Sources) */
-#define MON_RES_LENGTH (0x0003FC00)
-#define HWIB_INFO_START_ADDR (CONFIG_SYS_FLASH_BASE + MON_RES_LENGTH)
-#define HWIB_INFO_LEN 512
-#define CIB_INFO_START_ADDR (CONFIG_SYS_FLASH_BASE + MON_RES_LENGTH + HWIB_INFO_LEN)
-#define CIB_INFO_LEN 512
-
-#define CONFIG_SYS_HWINFO_OFFSET 0x3fc00 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000060 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * NAND-FLASH stuff
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define CONFIG_SYS_NAND_CS_DIST 0x80
-#define CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS 0x20
-#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x40
-
-#define CONFIG_SYS_NAND_BR ((CONFIG_SYS_NAND0_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMB |\
- BRx_V)
-
-#define CONFIG_SYS_NAND_OR (MEG_TO_AM(CONFIG_SYS_NAND_SIZE) |\
- ORxU_BI |\
- ORxU_EHTR_8IDLE)
-
-#define CONFIG_SYS_NAND_SIZE 1
-#define CONFIG_SYS_NAND0_BASE 0x50000000
-#define CONFIG_SYS_NAND1_BASE (CONFIG_SYS_NAND0_BASE + CONFIG_SYS_NAND_CS_DIST)
-#define CONFIG_SYS_NAND2_BASE (CONFIG_SYS_NAND1_BASE + CONFIG_SYS_NAND_CS_DIST)
-#define CONFIG_SYS_NAND3_BASE (CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 4 /* Max number of NAND devices */
-
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
- CONFIG_SYS_NAND1_BASE, \
- CONFIG_SYS_NAND2_BASE, \
- CONFIG_SYS_NAND3_BASE, \
- }
-
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr)) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr)))
-#define WRITE_NAND_UPM(d, adr, off) do \
-{ \
- volatile unsigned char *addr = (unsigned char *) (adr + off); \
- WRITE_NAND(d, addr); \
-} while(0)
-
-#endif /* CONFIG_CMD_NAND */
-
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_PCI_PNP
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#if 0
-#define __HRCW__ALL__ (HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
-
-# define CONFIG_SYS_HRCW_MASTER (__HRCW__ALL__ | HRCW_MODCK_H0111)
-#else
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11 | HRCW_ISB111 | HRCW_BMS | HRCW_MODCK_H0111)
-#endif
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR_60x (BCR_EBM|BCR_NPQM0|BCR_NPQM2) /* 60x mode */
-#define BCR_APD01 0x10000000
-#define CONFIG_SYS_BCR_SINGLE (BCR_APD01|BCR_ETM) /* 8260 mode */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-#define CONFIG_SYS_SIUMCR_LOW (SIUMCR_DPPC00)
-#define CONFIG_SYS_SIUMCR_HIGH (SIUMCR_DPPC00 | SIUMCR_ABE)
-#else
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00)
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 32 bit FLASH
- * 1 60x SDRAM 64 bit SDRAM
- * 2 60x UPMB 8 bit NAND
- * 3 60x UPMC 8 bit CAN
- *
- */
-
-/* Initialize SDRAM
- */
-#undef CONFIG_SYS_INIT_LOCAL_SDRAM /* No SDRAM on Local Bus */
-
-#define SDRAM_MAX_SIZE 0x20000000 /* max. 512 MB */
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */
-
-#define CONFIG_SYS_MPTPR 0x4000
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- * In fact, the address is rather configuration data presented to the SDRAM on
- * its address lines. Because the address lines may be mux'ed externally either
- * for 8 column or 9 column devices, some bits appear twice in the 8260's
- * address:
- *
- * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length |
- * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 |
- * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 |
- * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 |
- * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 |
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_8_CLK |\
- ORxG_TRLX)
-
-/* SDRAM on TQM8272 can have either 8 or 9 columns.
- * The number affects configuration values.
- */
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT 0x20 /* Low Value */
-/* #define CONFIG_SYS_PSRT 0x10 Fast Value */
-#define CONFIG_SYS_LSRT 0x20 /* Local Bus */
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL
-
-/* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A7 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_BUFCMD |\
- PSDMR_CL_2)
-
-
-/* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A5 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A7 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_BUFCMD |\
- PSDMR_CL_2)
-
-#define CONFIG_SYS_OR1_10COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A4 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_10COL (PSDMR_PBI |\
- PSDMR_SDAM_A17_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A4 |\
- PSDMR_RFRC_6_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_BUFCMD |\
- PSDMR_CL_2)
-
-#define PSDMR_RFRC_66MHZ_SINGLE 0x00028000 /* PSDMR[RFRC] at 66 MHz single mode */
-#define PSDMR_RFRC_100MHZ_SINGLE 0x00030000 /* PSDMR[RFRC] at 100 MHz single mode */
-#define PSDMR_RFRC_133MHZ_SINGLE 0x00030000 /* PSDMR[RFRC] at 133 MHz single mode */
-#define PSDMR_RFRC_66MHZ_60X 0x00030000 /* PSDMR[RFRC] at 66 MHz 60x mode */
-#define PSDMR_RFRC_100MHZ_60X 0x00028000 /* PSDMR[RFRC] at 100 MHz 60x mode */
-#define PSDMR_RFRC_DEFAULT PSDMR_RFRC_133MHZ_SINGLE /* PSDMR[RFRC] default value */
-
-#define PSDMR_PRETOACT_66MHZ_SINGLE 0x00002000 /* PSDMR[PRETOACT] at 66 MHz single mode */
-#define PSDMR_PRETOACT_100MHZ_SINGLE 0x00002000 /* PSDMR[PRETOACT] at 100 MHz single mode */
-#define PSDMR_PRETOACT_133MHZ_SINGLE 0x00002000 /* PSDMR[PRETOACT] at 133 MHz single mode */
-#define PSDMR_PRETOACT_66MHZ_60X 0x00001000 /* PSDMR[PRETOACT] at 66 MHz 60x mode */
-#define PSDMR_PRETOACT_100MHZ_60X 0x00001000 /* PSDMR[PRETOACT] at 100 MHz 60x mode */
-#define PSDMR_PRETOACT_DEFAULT PSDMR_PRETOACT_133MHZ_SINGLE /* PSDMR[PRETOACT] default value */
-
-#define PSDMR_WRC_66MHZ_SINGLE 0x00000020 /* PSDMR[WRC] at 66 MHz single mode */
-#define PSDMR_WRC_100MHZ_SINGLE 0x00000020 /* PSDMR[WRC] at 100 MHz single mode */
-#define PSDMR_WRC_133MHZ_SINGLE 0x00000010 /* PSDMR[WRC] at 133 MHz single mode */
-#define PSDMR_WRC_66MHZ_60X 0x00000010 /* PSDMR[WRC] at 66 MHz 60x mode */
-#define PSDMR_WRC_100MHZ_60X 0x00000010 /* PSDMR[WRC] at 100 MHz 60x mode */
-#define PSDMR_WRC_DEFAULT PSDMR_WRC_133MHZ_SINGLE /* PSDMR[WRC] default value */
-
-#define PSDMR_BUFCMD_66MHZ_SINGLE 0x00000000 /* PSDMR[BUFCMD] at 66 MHz single mode */
-#define PSDMR_BUFCMD_100MHZ_SINGLE 0x00000000 /* PSDMR[BUFCMD] at 100 MHz single mode */
-#define PSDMR_BUFCMD_133MHZ_SINGLE 0x00000004 /* PSDMR[BUFCMD] at 133 MHz single mode */
-#define PSDMR_BUFCMD_66MHZ_60X 0x00000000 /* PSDMR[BUFCMD] at 66 MHz 60x mode */
-#define PSDMR_BUFCMD_100MHZ_60X 0x00000000 /* PSDMR[BUFCMD]@100 MHz 60x mode */
-#define PSDMR_BUFCMD_DEFAULT PSDMR_BUFCMD_133MHZ_SINGLE /* PSDMR[BUFCMD] default value */
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#endif /* __CONFIG_H */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (6 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-11-04 16:01 ` [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command Andreas Bießmann
2014-10-20 1:48 ` [U-Boot] [PATCH 09/25] eeprom: Shuffle code around Marek Vasut
` (16 subsequent siblings)
24 siblings, 1 reply; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This is a reimplementation of the cmd_eeprom with the added bit
where it can select I2C bus. Just remove this ugly duplication.
If someone needs this code, there should be proper implementation
submitted.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bie?mann <andreas.biessmann@corscience.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
board/corscience/tricorder/Makefile | 2 +-
board/corscience/tricorder/tricorder-eeprom.c | 251 --------------------------
board/corscience/tricorder/tricorder-eeprom.h | 41 -----
3 files changed, 1 insertion(+), 293 deletions(-)
delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c
delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h
diff --git a/board/corscience/tricorder/Makefile b/board/corscience/tricorder/Makefile
index 266432d..c14ff07 100644
--- a/board/corscience/tricorder/Makefile
+++ b/board/corscience/tricorder/Makefile
@@ -8,4 +8,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := tricorder.o tricorder-eeprom.o led.o
+obj-y := tricorder.o led.o
diff --git a/board/corscience/tricorder/tricorder-eeprom.c b/board/corscience/tricorder/tricorder-eeprom.c
deleted file mode 100644
index 1c74a0f..0000000
--- a/board/corscience/tricorder/tricorder-eeprom.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2013
- * Corscience GmbH & Co. KG, <www.corscience.de>
- * Andreas Bie?mann <andreas.biessmann@corscience.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <i2c.h>
-
-#include "tricorder-eeprom.h"
-
-static inline void warn_wrong_value(const char *msg, unsigned int a,
- unsigned int b)
-{
- printf("Expected EEPROM %s %08x, got %08x\n", msg, a, b);
-}
-
-static int handle_eeprom_v0(struct tricorder_eeprom *eeprom)
-{
- struct tricorder_eeprom_v0 {
- uint32_t magic;
- uint16_t length;
- uint16_t version;
- char board_name[TRICORDER_BOARD_NAME_LENGTH];
- char board_version[TRICORDER_BOARD_VERSION_LENGTH];
- char board_serial[TRICORDER_BOARD_SERIAL_LENGTH];
- uint32_t crc32;
- } __packed eepromv0;
- uint32_t crc;
-
- printf("Old EEPROM (v0), consider rewrite!\n");
-
- if (be16_to_cpu(eeprom->length) != sizeof(eepromv0)) {
- warn_wrong_value("length", sizeof(eepromv0),
- be16_to_cpu(eeprom->length));
- return 1;
- }
-
- memcpy(&eepromv0, eeprom, sizeof(eepromv0));
-
- crc = crc32(0L, (unsigned char *)&eepromv0,
- sizeof(eepromv0) - sizeof(eepromv0.crc32));
- if (be32_to_cpu(eepromv0.crc32) != crc) {
- warn_wrong_value("CRC", be32_to_cpu(eepromv0.crc32),
- crc);
- return 1;
- }
-
- /* Ok the content is correct, do the conversion */
- memset(eeprom->interface_version, 0x0,
- TRICORDER_INTERFACE_VERSION_LENGTH);
- crc = crc32(0L, (unsigned char *)eeprom, TRICORDER_EEPROM_CRC_SIZE);
- eeprom->crc32 = cpu_to_be32(crc);
-
- return 0;
-}
-
-static int handle_eeprom_v1(struct tricorder_eeprom *eeprom)
-{
- uint32_t crc;
-
- if (be16_to_cpu(eeprom->length) != TRICORDER_EEPROM_SIZE) {
- warn_wrong_value("length", TRICORDER_EEPROM_SIZE,
- be16_to_cpu(eeprom->length));
- return 1;
- }
-
- crc = crc32(0L, (unsigned char *)eeprom, TRICORDER_EEPROM_CRC_SIZE);
- if (be32_to_cpu(eeprom->crc32) != crc) {
- warn_wrong_value("CRC", be32_to_cpu(eeprom->crc32), crc);
- return 1;
- }
-
- return 0;
-}
-
-int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom)
-{
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- unsigned int bus = i2c_get_bus_num();
- i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
-
- memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
-
- i2c_read(addr, 0, 2, (unsigned char *)eeprom, TRICORDER_EEPROM_SIZE);
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- i2c_set_bus_num(bus);
-#endif
-
- if (be32_to_cpu(eeprom->magic) != TRICORDER_EEPROM_MAGIC) {
- warn_wrong_value("magic", TRICORDER_EEPROM_MAGIC,
- be32_to_cpu(eeprom->magic));
- return 1;
- }
-
- switch (be16_to_cpu(eeprom->version)) {
- case 0:
- return handle_eeprom_v0(eeprom);
- case 1:
- return handle_eeprom_v1(eeprom);
- default:
- warn_wrong_value("version", TRICORDER_EEPROM_VERSION,
- be16_to_cpu(eeprom->version));
- return 1;
- }
-}
-
-#if !defined(CONFIG_SPL)
-int tricorder_eeprom_read(unsigned devaddr)
-{
- struct tricorder_eeprom eeprom;
- int ret = tricorder_get_eeprom(devaddr, &eeprom);
-
- if (ret)
- return ret;
-
- printf("Board type: %.*s\n",
- sizeof(eeprom.board_name), eeprom.board_name);
- printf("Board version: %.*s\n",
- sizeof(eeprom.board_version), eeprom.board_version);
- printf("Board serial: %.*s\n",
- sizeof(eeprom.board_serial), eeprom.board_serial);
- printf("Board interface version: %.*s\n",
- sizeof(eeprom.interface_version),
- eeprom.interface_version);
-
- return ret;
-}
-
-int tricorder_eeprom_write(unsigned devaddr, const char *name,
- const char *version, const char *serial, const char *interface)
-{
- struct tricorder_eeprom eeprom, eeprom_verify;
- size_t length;
- uint32_t crc;
- int ret;
- unsigned char *p;
- int i;
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- unsigned int bus;
-#endif
-
- memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
- memset(eeprom_verify, 0, TRICORDER_EEPROM_SIZE);
-
- eeprom.magic = cpu_to_be32(TRICORDER_EEPROM_MAGIC);
- eeprom.length = cpu_to_be16(TRICORDER_EEPROM_SIZE);
- eeprom.version = cpu_to_be16(TRICORDER_EEPROM_VERSION);
-
- length = min(sizeof(eeprom.board_name), strlen(name));
- strncpy(eeprom.board_name, name, length);
-
- length = min(sizeof(eeprom.board_version), strlen(version));
- strncpy(eeprom.board_version, version, length);
-
- length = min(sizeof(eeprom.board_serial), strlen(serial));
- strncpy(eeprom.board_serial, serial, length);
-
- if (interface) {
- length = min(sizeof(eeprom.interface_version),
- strlen(interface));
- strncpy(eeprom.interface_version, interface, length);
- }
-
- crc = crc32(0L, (unsigned char *)&eeprom, TRICORDER_EEPROM_CRC_SIZE);
- eeprom.crc32 = cpu_to_be32(crc);
-
-#if defined(DEBUG)
- puts("Tricorder EEPROM content:\n");
- print_buffer(0, &eeprom, 1, sizeof(eeprom), 16);
-#endif
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- bus = i2c_get_bus_num();
- i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
-
- /* do page write to the eeprom */
- for (i = 0, p = (unsigned char *)&eeprom;
- i < sizeof(eeprom);
- i += 32, p += 32) {
- ret = i2c_write(devaddr, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- p, min(sizeof(eeprom) - i, 32));
- if (ret)
- break;
- udelay(5000); /* 5ms write cycle timing */
- }
-
- ret = i2c_read(devaddr, 0, 2, (unsigned char *)&eeprom_verify,
- TRICORDER_EEPROM_SIZE);
-
- if (memcmp(&eeprom, &eeprom_verify, sizeof(eeprom)) != 0) {
- printf("Tricorder: Could not verify EEPROM content!\n");
- ret = 1;
- }
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- i2c_set_bus_num(bus);
-#endif
- return ret;
-}
-
-int do_tricorder_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- if (argc == 3) {
- ulong dev_addr = simple_strtoul(argv[2], NULL, 16);
- eeprom_init();
- if (strcmp(argv[1], "read") == 0) {
- int rcode;
-
- rcode = tricorder_eeprom_read(dev_addr);
-
- return rcode;
- }
- } else if (argc == 6 || argc == 7) {
- ulong dev_addr = simple_strtoul(argv[2], NULL, 16);
- char *name = argv[3];
- char *version = argv[4];
- char *serial = argv[5];
- char *interface = NULL;
- eeprom_init();
-
- if (argc == 7)
- interface = argv[6];
-
- if (strcmp(argv[1], "write") == 0) {
- int rcode;
-
- rcode = tricorder_eeprom_write(dev_addr, name, version,
- serial, interface);
-
- return rcode;
- }
- }
-
- return CMD_RET_USAGE;
-}
-
-U_BOOT_CMD(
- tricordereeprom, 7, 1, do_tricorder_eeprom,
- "Tricorder EEPROM",
- "read devaddr\n"
- " - read Tricorder EEPROM at devaddr and print content\n"
- "tricordereeprom write devaddr name version serial [interface]\n"
- " - write Tricorder EEPROM@devaddr with 'name', 'version'"
- "and 'serial'\n"
- " optional add an HW interface parameter"
-);
-#endif /* CONFIG_SPL */
diff --git a/board/corscience/tricorder/tricorder-eeprom.h b/board/corscience/tricorder/tricorder-eeprom.h
deleted file mode 100644
index 06ed9a5..0000000
--- a/board/corscience/tricorder/tricorder-eeprom.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2013
- * Corscience GmbH & Co. KG, <www.corscience.de>
- * Andreas Bie?mann <andreas.biessmann@corscience.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef TRICORDER_EEPROM_H_
-#define TRICORDER_EEPROM_H_
-
-#include <linux/compiler.h>
-
-#define TRICORDER_EEPROM_MAGIC 0xc2a94f52
-#define TRICORDER_EEPROM_VERSION 1
-
-#define TRICORDER_BOARD_NAME_LENGTH 12
-#define TRICORDER_BOARD_VERSION_LENGTH 4
-#define TRICORDER_BOARD_SERIAL_LENGTH 12
-#define TRICORDER_INTERFACE_VERSION_LENGTH 4
-
-struct tricorder_eeprom {
- uint32_t magic;
- uint16_t length;
- uint16_t version;
- char board_name[TRICORDER_BOARD_NAME_LENGTH];
- char board_version[TRICORDER_BOARD_VERSION_LENGTH];
- char board_serial[TRICORDER_BOARD_SERIAL_LENGTH];
- char interface_version[TRICORDER_INTERFACE_VERSION_LENGTH];
- uint32_t crc32;
-} __packed;
-
-#define TRICORDER_EEPROM_SIZE sizeof(struct tricorder_eeprom)
-#define TRICORDER_EEPROM_CRC_SIZE (TRICORDER_EEPROM_SIZE - \
- sizeof(uint32_t))
-
-/**
- * @brief read eeprom information from a specific eeprom address
- */
-int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom);
-
-#endif /* TRICORDER_EEPROM_H_ */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 09/25] eeprom: Shuffle code around
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (7 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 10/25] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS Marek Vasut
` (15 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Just move the code around so that the forward declarations are not
necessary. Also zap a few checkpatch issues where applicable and
zap the use of #ifdef CONFIG_CMD_EEPROM in the code, since this is
always true.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 176 ++++++++++++++++++++++------------------------------
1 file changed, 74 insertions(+), 102 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index a02f0cb..17d241d 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -25,94 +25,60 @@
#include <command.h>
#include <i2c.h>
-extern void eeprom_init (void);
-extern int eeprom_read (unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt);
-extern int eeprom_write (unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt);
-#if defined(CONFIG_SYS_EEPROM_WREN)
-extern int eeprom_write_enable (unsigned dev_addr, int state);
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
#endif
-
+/* Maximum number of times to poll for acknowledge after write */
#if defined(CONFIG_SYS_EEPROM_X40430)
- /* Maximum number of times to poll for acknowledge after write */
#define MAX_ACKNOWLEDGE_POLLS 10
#endif
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_EEPROM)
-static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- const char *const fmt =
- "\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";
-
-#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS)
- if (argc == 6) {
- ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
- ulong addr = simple_strtoul (argv[3], NULL, 16);
- ulong off = simple_strtoul (argv[4], NULL, 16);
- ulong cnt = simple_strtoul (argv[5], NULL, 16);
-#else
- if (argc == 5) {
- ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
- ulong addr = simple_strtoul (argv[2], NULL, 16);
- ulong off = simple_strtoul (argv[3], NULL, 16);
- ulong cnt = simple_strtoul (argv[4], NULL, 16);
-#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
-
-# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- eeprom_init ();
-# endif /* !CONFIG_SPI */
-
- if (strcmp (argv[1], "read") == 0) {
- int rcode;
-
- printf (fmt, dev_addr, argv[1], addr, off, cnt);
-
- rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
-
- puts ("done\n");
- return rcode;
- } else if (strcmp (argv[1], "write") == 0) {
- int rcode;
-
- printf (fmt, dev_addr, argv[1], addr, off, cnt);
-
- rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
-
- puts ("done\n");
- return rcode;
- }
- }
-
- return CMD_RET_USAGE;
-}
-#endif
-
-/*-----------------------------------------------------------------------
- *
+/*
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
*
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
* 0x00000nxx for EEPROM address selectors and page number at n.
*/
-
#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1 || CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2
+#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
#endif
#endif
+#if defined(CONFIG_SYS_EEPROM_WREN)
+extern int eeprom_write_enable (unsigned dev_addr, int state);
+#endif
+
+void eeprom_init(void)
+{
+ /* SPI EEPROM */
+#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+ spi_init_f ();
+#endif
+
+ /* I2C EEPROM */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) || \
+ defined(CONFIG_SYS_I2C)
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+#endif
+}
+
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
- /* Read data until done or would cross a page boundary.
+ /*
+ * Read data until done or would cross a page boundary.
* We must write the address again when changing pages
* because the next page may be in a different device.
*/
@@ -171,15 +137,6 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
return rcode;
}
-/*-----------------------------------------------------------------------
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
- * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
- * 0x00000nxx for EEPROM address selectors and page number at n.
- */
-
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
@@ -197,7 +154,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable (dev_addr,1);
#endif
- /* Write data until done or would cross a write page boundary.
+ /*
+ * Write data until done or would cross a write page boundary.
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
@@ -357,8 +315,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
}
#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-int
-eeprom_probe (unsigned dev_addr, unsigned offset)
+int eeprom_probe(unsigned dev_addr, unsigned offset)
{
unsigned char chip;
@@ -376,35 +333,52 @@ eeprom_probe (unsigned dev_addr, unsigned offset)
}
#endif
-/*-----------------------------------------------------------------------
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-void eeprom_init (void)
+static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
+ const char *const fmt =
+ "\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";
-#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- spi_init_f ();
-#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) || \
- defined(CONFIG_SYS_I2C)
-#ifdef CONFIG_SYS_I2C
- i2c_init_all();
+#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS)
+ if (argc == 6) {
+ ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
+ ulong addr = simple_strtoul (argv[3], NULL, 16);
+ ulong off = simple_strtoul (argv[4], NULL, 16);
+ ulong cnt = simple_strtoul (argv[5], NULL, 16);
#else
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-#endif
-}
+ if (argc == 5) {
+ ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ ulong off = simple_strtoul (argv[3], NULL, 16);
+ ulong cnt = simple_strtoul (argv[4], NULL, 16);
+#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
-/*-----------------------------------------------------------------------
- */
+# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+ eeprom_init ();
+# endif /* !CONFIG_SPI */
-/***************************************************/
+ if (strcmp (argv[1], "read") == 0) {
+ int rcode;
-#if defined(CONFIG_CMD_EEPROM)
+ printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+ rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
+
+ puts ("done\n");
+ return rcode;
+ } else if (strcmp (argv[1], "write") == 0) {
+ int rcode;
+
+ printf (fmt, dev_addr, argv[1], addr, off, cnt);
+
+ rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
+
+ puts ("done\n");
+ return rcode;
+ }
+ }
+
+ return CMD_RET_USAGE;
+}
#ifdef CONFIG_SYS_I2C_MULTI_EEPROMS
U_BOOT_CMD(
@@ -423,5 +397,3 @@ U_BOOT_CMD(
" - read/write `cnt' bytes at EEPROM offset `off'"
)
#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
-
-#endif
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 10/25] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (8 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 09/25] eeprom: Shuffle code around Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 11/25] eeprom: Zap CONFIG_SYS_EEPROM_X40430 Marek Vasut
` (14 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This option only complicates the code unnecessarily, just use
CONFIG_SYS_DEF_EEPROM_ADDR as the default address if there are
only five arguments to eeprom {read/write} if this is defined.
If CONFIG_SYS_DEF_EEPROM_ADDR is not defined, we mandate all
six arguments.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 69 ++++++++++++++++++-----------------------
include/configs/BSC9131RDB.h | 1 -
include/configs/BSC9132QDS.h | 1 -
include/configs/C29XPCIE.h | 1 -
include/configs/CPCI405AB.h | 1 -
include/configs/CPCI750.h | 1 -
include/configs/DB64360.h | 1 -
include/configs/DB64460.h | 1 -
include/configs/DU440.h | 1 -
include/configs/P1010RDB.h | 1 -
include/configs/PMC440.h | 1 -
include/configs/TQM834x.h | 1 -
include/configs/W7OLMC.h | 1 -
include/configs/W7OLMG.h | 1 -
include/configs/acadia.h | 1 -
include/configs/am335x_evm.h | 1 -
include/configs/am43xx_evm.h | 1 -
include/configs/axs101.h | 1 -
include/configs/bamboo.h | 1 -
include/configs/canyonlands.h | 1 -
include/configs/cpci5200.h | 1 -
include/configs/ebony.h | 1 -
include/configs/icon.h | 1 -
include/configs/intip.h | 1 -
include/configs/katmai.h | 1 -
include/configs/km/km-powerpc.h | 1 -
include/configs/km/km_arm.h | 1 -
include/configs/korat.h | 1 -
include/configs/ks2_evm.h | 1 -
include/configs/luan.h | 1 -
include/configs/m28evk.h | 1 -
include/configs/mecp5200.h | 1 -
include/configs/motionpro.h | 1 -
include/configs/ocotea.h | 1 -
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/pcm051.h | 1 -
include/configs/pengwyn.h | 1 -
include/configs/pf5200.h | 1 -
include/configs/sequoia.h | 1 -
include/configs/t3corp.h | 1 -
include/configs/taishan.h | 1 -
include/configs/tricorder.h | 1 -
include/configs/walnut.h | 1 -
include/configs/yosemite.h | 1 -
45 files changed, 30 insertions(+), 83 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 17d241d..67de730 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -337,50 +337,50 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *const fmt =
"\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";
+ char * const *args = &argv[2];
+ int rcode;
+ ulong dev_addr, addr, off, cnt;
+
+ switch (argc) {
+#ifdef CONFIG_SYS_DEF_EEPROM_ADDR
+ case 5:
+ dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
+ break;
+#endif
+ case 6:
+ dev_addr = simple_strtoul(*args++, NULL, 16);
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
-#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS)
- if (argc == 6) {
- ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
- ulong addr = simple_strtoul (argv[3], NULL, 16);
- ulong off = simple_strtoul (argv[4], NULL, 16);
- ulong cnt = simple_strtoul (argv[5], NULL, 16);
-#else
- if (argc == 5) {
- ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
- ulong addr = simple_strtoul (argv[2], NULL, 16);
- ulong off = simple_strtoul (argv[3], NULL, 16);
- ulong cnt = simple_strtoul (argv[4], NULL, 16);
-#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
+ addr = simple_strtoul(*args++, NULL, 16);
+ off = simple_strtoul(*args++, NULL, 16);
+ cnt = simple_strtoul(*args++, NULL, 16);
# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- eeprom_init ();
+ eeprom_init ();
# endif /* !CONFIG_SPI */
- if (strcmp (argv[1], "read") == 0) {
- int rcode;
-
- printf (fmt, dev_addr, argv[1], addr, off, cnt);
-
- rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
+ if (strcmp (argv[1], "read") == 0) {
+ printf(fmt, dev_addr, argv[1], addr, off, cnt);
- puts ("done\n");
- return rcode;
- } else if (strcmp (argv[1], "write") == 0) {
- int rcode;
+ rcode = eeprom_read(dev_addr, off, (uchar *) addr, cnt);
- printf (fmt, dev_addr, argv[1], addr, off, cnt);
+ puts ("done\n");
+ return rcode;
+ } else if (strcmp (argv[1], "write") == 0) {
+ printf(fmt, dev_addr, argv[1], addr, off, cnt);
- rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
+ rcode = eeprom_write(dev_addr, off, (uchar *) addr, cnt);
- puts ("done\n");
- return rcode;
- }
+ puts ("done\n");
+ return rcode;
}
return CMD_RET_USAGE;
}
-#ifdef CONFIG_SYS_I2C_MULTI_EEPROMS
U_BOOT_CMD(
eeprom, 6, 1, do_eeprom,
"EEPROM sub-system",
@@ -388,12 +388,3 @@ U_BOOT_CMD(
"eeprom write devaddr addr off cnt\n"
" - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
)
-#else /* One EEPROM */
-U_BOOT_CMD(
- eeprom, 5, 1, do_eeprom,
- "EEPROM sub-system",
- "read addr off cnt\n"
- "eeprom write addr off cnt\n"
- " - read/write `cnt' bytes at EEPROM offset `off'"
-)
-#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 56a3e94..3d488c7 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -265,7 +265,6 @@ extern unsigned long get_sdram_size(void);
/* I2C EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index aeded6d..a75775a 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -464,7 +464,6 @@ combinations. this should be removed later
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 715616d..a8da16d 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -422,7 +422,6 @@
/* I2C EEPROM */
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 7d58e9d..94b3efa 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -253,7 +253,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom used! */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
/* 32 byte page write mode using*/
/* last 5 bits of the address */
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 304a12b..c57457b 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -167,7 +167,6 @@
* Miscellaneous configurable options
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */
#define CONFIG_PRAM 0
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index b77c8b2..03f38c2 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -250,7 +250,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
* Miscellaneous configurable options
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */
/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index abc4434..96a6254 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -188,7 +188,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
* Miscellaneous configurable options
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */
/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index be5494b..4409553 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -170,7 +170,6 @@
#define IIC1_USB2507_ADDR 0x2c
#define CONFIG_SYS_I2C_NOPROBES { {1, IIC1_USB2507_ADDR} }
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index a373990..eed836b 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -661,7 +661,6 @@ extern unsigned long get_sdram_size(void);
#endif
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index c5e2f16..eb23839 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -156,7 +156,6 @@
#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 6762e3a..7792ccb 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -181,7 +181,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32 bytes/write */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 /* 10ms +/- 20% */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS /* more than one eeprom */
/* I2C RTC */
#define CONFIG_RTC_DS1337 /* use ds1337 rtc via i2c */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 895ad46..de4585d 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -273,7 +273,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
/* 16 byte page write mode using*/
/* last 4 bits of the address */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
/*-----------------------------------------------------------------------
* Definitions for Serial Presence Detect EEPROM address
* (to get SDRAM settings)
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 2a38116..bac5ba9 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -276,7 +276,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM ATMEL 24C04N */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
/*-----------------------------------------------------------------------
* Definitions for Serial Presence Detect EEPROM address
* (to get SDRAM settings)
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 4dd5720..2f53d73 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -120,7 +120,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 476430d..07cd2d8 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -209,7 +209,6 @@
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
/* PMIC support */
#define CONFIG_POWER_TPS65217
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 0707827..3f92dd2 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -30,7 +30,6 @@
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
/* Power */
#define CONFIG_POWER
diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index 1bf8390..008d394 100644
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -98,7 +98,6 @@
/*
* EEPROM configuration
*/
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 6ba4aaf..5b8b22f 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -139,7 +139,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8eeb15c..5349511 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -246,7 +246,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index ec926fd..92c1900 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -173,7 +173,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
/*
* Flash configuration
*/
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 3f0ad69..18012bb 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -123,7 +123,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/icon.h b/include/configs/icon.h
index bbe9b59..d9a3671 100644
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -107,7 +107,6 @@
#define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/intip.h b/include/configs/intip.h
index 928eb5b..1accb64 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -217,7 +217,6 @@
*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index fa72eb0..664896b 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -109,7 +109,6 @@
#define IIC0_BOOTPROM_ADDR 0x50
#define IIC0_ALT_BOOTPROM_ADDR 0x54
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0x50)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index eb85a74..2b0b9dc 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -21,7 +21,6 @@
#define CONFIG_KM_COMMON_ETH_INIT
/* EEprom support 24C08, 24C16, 24C64 */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index d31e674..1061d1d 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -218,7 +218,6 @@ int get_scl(void);
#define CONFIG_SYS_I2C_SOFT_SPEED 100000
/* EEprom support 24C128, 24C256 valid for environment eeprom */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 5494a60..1085237 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -147,7 +147,6 @@
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 51926f7..c6cee42 100644
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -120,7 +120,6 @@
#define I2C_BUS_MAX 3
/* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 15e4a7e..e22d0e8 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -119,7 +119,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index efe770b..b566e54 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -97,7 +97,6 @@
/* EEPROM */
#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#endif
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index b270429..aab787d 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -148,7 +148,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
/*
* Flash configuration
*/
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index e8b0593..2d2fcd8 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -296,7 +296,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */
/*
* RTC configuration
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 4ff2f05..cd9e5ea 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -136,7 +136,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 9b58950..95250f3 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -665,7 +665,6 @@
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 911203d..203d041 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -261,7 +261,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 7d102a4..e99a5c6 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -109,7 +109,6 @@
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 4684ad6..fdb103f 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -112,7 +112,6 @@
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
/* SPL */
#define CONFIG_SPL_POWER_SUPPORT
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index be76478..af334f7 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -165,7 +165,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
/*
* Flash configuration
*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index b6a5e6a..5af751b 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -160,7 +160,6 @@
*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index 502e795..7942865 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -307,7 +307,6 @@
*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 3d5c351..64568fe 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -121,7 +121,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#undef CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 6ddf3d5..7a46e60 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -109,7 +109,6 @@
/* EEPROM */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_BUS_NUM 1
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 8b803a2..dd6b519 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -80,7 +80,6 @@
*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 8508a80..0cffab8 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -122,7 +122,6 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 11/25] eeprom: Zap CONFIG_SYS_EEPROM_X40430
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (9 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 10/25] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 12/25] eeprom: Zap eeprom_probe() Marek Vasut
` (13 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Now that the only user of CONFIG_SYS_EEPROM_X40430 was removed,
remove this unused code from cmd_eeprom.c
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 95 -----------------------------------------------------
1 file changed, 95 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 67de730..b0acf11 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -29,11 +29,6 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-/* Maximum number of times to poll for acknowledge after write */
-#if defined(CONFIG_SYS_EEPROM_X40430)
-#define MAX_ACKNOWLEDGE_POLLS 10
-#endif
-
/*
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
@@ -143,14 +138,6 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned blk_off;
int rcode = 0;
-#if defined(CONFIG_SYS_EEPROM_X40430)
- uchar contr_r_addr[2];
- uchar addr_void[2];
- uchar contr_reg[2];
- uchar ctrl_reg_v;
- int i;
-#endif
-
#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable (dev_addr,1);
#endif
@@ -215,88 +202,6 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
spi_write (addr, alen, buffer, len);
#else
-#if defined(CONFIG_SYS_EEPROM_X40430)
- /* Get the value of the control register.
- * Set current address (internal pointer in the x40430)
- * to 0x1ff.
- */
- contr_r_addr[0] = 9;
- contr_r_addr[1] = 0xff;
- addr_void[0] = 0;
- addr_void[1] = addr[1];
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
- contr_r_addr[0] |= CONFIG_SYS_I2C_EEPROM_ADDR;
- addr_void[0] |= CONFIG_SYS_I2C_EEPROM_ADDR;
-#endif
- contr_reg[0] = 0xff;
- if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
- rcode = 1;
- }
- ctrl_reg_v = contr_reg[0];
-
- /* Are any of the eeprom blocks write protected?
- */
- if (ctrl_reg_v & 0x18) {
- ctrl_reg_v &= ~0x18; /* reset block protect bits */
- ctrl_reg_v |= 0x02; /* set write enable latch */
- ctrl_reg_v &= ~0x04; /* clear RWEL */
-
- /* Set write enable latch.
- */
- contr_reg[0] = 0x02;
- if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
- rcode = 1;
- }
-
- /* Set register write enable latch.
- */
- contr_reg[0] = 0x06;
- if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
- rcode = 1;
- }
-
- /* Modify ctrl register.
- */
- contr_reg[0] = ctrl_reg_v;
- if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
- rcode = 1;
- }
-
- /* The write (above) is an operation on NV memory.
- * These can take some time (~5ms), and the device
- * will not respond to further I2C messages till
- * it's completed the write.
- * So poll device for an I2C acknowledge.
- * When we get one we know we can continue with other
- * operations.
- */
- contr_reg[0] = 0;
- for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
- if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 0)
- break; /* got ack */
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
- }
- if (i == MAX_ACKNOWLEDGE_POLLS) {
- puts ("EEPROM poll acknowledge failed\n");
- rcode = 1;
- }
- }
-
- /* Is the write enable latch on?.
- */
- else if (!(ctrl_reg_v & 0x02)) {
- /* Set write enable latch.
- */
- contr_reg[0] = 0x02;
- if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
- rcode = 1;
- }
- }
- /* Write is enabled ... now write eeprom value.
- */
-#endif
if (i2c_write(addr[0], offset, alen - 1, buffer, len))
rcode = 1;
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 12/25] eeprom: Zap eeprom_probe()
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (10 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 11/25] eeprom: Zap CONFIG_SYS_EEPROM_X40430 Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 13/25] eeprom: Zap CONFIG_SPI_X Marek Vasut
` (12 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Remove this function as it's no longer used.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 19 -------------------
include/common.h | 3 ---
2 files changed, 22 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index b0acf11..ff492c4 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -219,25 +219,6 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
return rcode;
}
-#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-int eeprom_probe(unsigned dev_addr, unsigned offset)
-{
- unsigned char chip;
-
- /* Probe the chip address
- */
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
- chip = offset >> 8; /* block number */
-#else
- chip = offset >> 16; /* block number */
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
-
- chip |= dev_addr; /* insert device address */
-
- return (i2c_probe (chip));
-}
-#endif
-
static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *const fmt =
diff --git a/include/common.h b/include/common.h
index c96b58e..68596fc 100644
--- a/include/common.h
+++ b/include/common.h
@@ -456,9 +456,6 @@ void fdc_hw_init (void);
/* $(BOARD)/eeprom.c */
void eeprom_init (void);
-#ifndef CONFIG_SPI
-int eeprom_probe (unsigned dev_addr, unsigned offset);
-#endif
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
#ifdef CONFIG_LWMON
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 13/25] eeprom: Zap CONFIG_SPI_X
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (11 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 12/25] eeprom: Zap eeprom_probe() Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 14/25] eeprom: Pull out the I/O code Marek Vasut
` (11 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
This macro is no longer used, so just reap it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
---
README | 5 -----
common/cmd_eeprom.c | 8 ++++----
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/README b/README
index 46def00..d267b6a 100644
--- a/README
+++ b/README
@@ -2609,11 +2609,6 @@ CBFS (Coreboot Filesystem) support
Enables the driver for SPI controller on SuperH. Currently
only SH7757 is supported.
- CONFIG_SPI_X
-
- Enables extended (16-bit) SPI EEPROM addressing.
- (symmetrical to CONFIG_I2C_X)
-
CONFIG_SOFT_SPI
Enables a software (bit-bang) SPI driver rather than
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index ff492c4..d00598b 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -83,7 +83,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
uchar addr[2];
blk_off = offset & 0xFF; /* block offset */
@@ -100,7 +100,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
addr[1] = offset >> 8; /* upper address octet */
addr[2] = blk_off; /* lower address octet */
alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
addr[0] |= dev_addr; /* insert device address */
@@ -153,7 +153,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
uchar addr[2];
blk_off = offset & 0xFF; /* block offset */
@@ -170,7 +170,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
addr[1] = offset >> 8; /* upper address octet */
addr[2] = blk_off; /* lower address octet */
alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
addr[0] |= dev_addr; /* insert device address */
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 14/25] eeprom: Pull out the I/O code
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (12 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 13/25] eeprom: Zap CONFIG_SPI_X Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 15/25] eeprom: Pull out address computation Marek Vasut
` (10 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Pull out the code which does the I2C or SPI read/write, so that
the beefy ifdef around it is contained in a single function.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index d00598b..b956233 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -66,6 +66,29 @@ void eeprom_init(void)
#endif
}
+static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
+ uchar *buffer, unsigned len, bool read)
+{
+ int ret = 0;
+
+ /* SPI */
+#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+ if (read)
+ spi_read(addr, alen, buffer, len);
+ else
+ spi_write(addr, alen, buffer, len);
+#else /* I2C */
+ if (read)
+ ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
+ else
+ ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
+
+ if (ret)
+ ret = 1;
+#endif
+ return ret;
+}
+
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
@@ -119,12 +142,8 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
len = maxlen;
#endif
-#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- spi_read (addr, alen, buffer, len);
-#else
- if (i2c_read(addr[0], offset, alen - 1, buffer, len))
- rcode = 1;
-#endif
+ rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
+
buffer += len;
offset += len;
}
@@ -199,13 +218,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
len = maxlen;
#endif
-#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- spi_write (addr, alen, buffer, len);
-#else
- if (i2c_write(addr[0], offset, alen - 1, buffer, len))
- rcode = 1;
+ rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
-#endif
buffer += len;
offset += len;
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 15/25] eeprom: Pull out address computation
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (13 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 14/25] eeprom: Pull out the I/O code Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 16/25] eeprom: Make eeprom_write_enable() weak Marek Vasut
` (9 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Pull out the code computing the EEPROM address into separate function
so that it's not duplicated.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 64 ++++++++++++++++++++++-------------------------------
1 file changed, 26 insertions(+), 38 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index b956233..78c6121 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -66,6 +66,28 @@ void eeprom_init(void)
#endif
}
+static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
+{
+ unsigned blk_off;
+ int alen;
+
+ blk_off = offset & 0xff; /* block offset */
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+#else
+ addr[0] = offset >> 16; /* block number */
+ addr[1] = offset >> 8; /* upper address octet */
+ addr[2] = blk_off; /* lower address octet */
+ alen = 3;
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
+
+ addr[0] |= dev_addr; /* insert device address */
+
+ return alen;
+}
+
static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
uchar *buffer, unsigned len, bool read)
{
@@ -94,6 +116,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
+ uchar addr[3];
/*
* Read data until done or would cross a page boundary.
@@ -106,26 +129,8 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
- uchar addr[2];
-
- blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 8; /* block number */
- addr[1] = blk_off; /* block offset */
- alen = 2;
-#else
- uchar addr[3];
-
blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 16; /* block number */
- addr[1] = offset >> 8; /* upper address octet */
- addr[2] = blk_off; /* lower address octet */
- alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
-
- addr[0] |= dev_addr; /* insert device address */
+ alen = eeprom_addr(dev_addr, offset, addr);
len = end - offset;
@@ -156,6 +161,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
+ uchar addr[3];
#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable (dev_addr,1);
@@ -172,26 +178,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
- uchar addr[2];
-
blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 8; /* block number */
- addr[1] = blk_off; /* block offset */
- alen = 2;
-#else
- uchar addr[3];
-
- blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 16; /* block number */
- addr[1] = offset >> 8; /* upper address octet */
- addr[2] = blk_off; /* lower address octet */
- alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
-
- addr[0] |= dev_addr; /* insert device address */
+ alen = eeprom_addr(dev_addr, offset, addr);
len = end - offset;
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 16/25] eeprom: Make eeprom_write_enable() weak
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (14 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 15/25] eeprom: Pull out address computation Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 17/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS Marek Vasut
` (8 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Make this function weak and implement it's weak implementation
so that the boards can just reimplement it. This zaps the horrid
CONFIG_SYS_EEPROM_WREN macro.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 78c6121..3fc3706 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -44,9 +44,10 @@
#endif
#endif
-#if defined(CONFIG_SYS_EEPROM_WREN)
-extern int eeprom_write_enable (unsigned dev_addr, int state);
-#endif
+__weak int eeprom_write_enable(unsigned dev_addr, int state)
+{
+ return 0;
+}
void eeprom_init(void)
{
@@ -163,9 +164,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
int rcode = 0;
uchar addr[3];
-#if defined(CONFIG_SYS_EEPROM_WREN)
- eeprom_write_enable (dev_addr,1);
-#endif
+ eeprom_write_enable(dev_addr, 1);
+
/*
* Write data until done or would cross a write page boundary.
* We must write the address again when changing pages
@@ -215,9 +215,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
}
-#if defined(CONFIG_SYS_EEPROM_WREN)
- eeprom_write_enable (dev_addr,0);
-#endif
+
+ eeprom_write_enable(dev_addr, 0);
+
return rcode;
}
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 17/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (15 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 16/25] eeprom: Make eeprom_write_enable() weak Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 18/25] eeprom: Suck the ifdef into eeprom_init() Marek Vasut
` (7 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Pull this macro to the beginning of the cmd_eeprom.c and remove
another nasty ifdef from the code. Note that this is legal, since
udelay(0) changes the behavior only such that it pings the WDT if
WDT is enabled and otherwise does not wait.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 3fc3706..918def4 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -29,6 +29,10 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
+#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 0
+#endif
+
/*
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
@@ -211,9 +215,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
buffer += len;
offset += len;
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
}
eeprom_write_enable(dev_addr, 0);
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 18/25] eeprom: Suck the ifdef into eeprom_init()
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (16 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 17/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 19/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS Marek Vasut
` (6 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Just suck the ugly ifdef around eeprom_init() call into eeprom_init()
function itself. This puts all of the ifdef mess into one place.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 918def4..97747de 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -55,6 +55,8 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
void eeprom_init(void)
{
+# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+
/* SPI EEPROM */
#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
spi_init_f ();
@@ -69,6 +71,8 @@ void eeprom_init(void)
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
#endif
+
+# endif /* !CONFIG_SPI */
}
static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
@@ -248,9 +252,7 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
off = simple_strtoul(*args++, NULL, 16);
cnt = simple_strtoul(*args++, NULL, 16);
-# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- eeprom_init ();
-# endif /* !CONFIG_SPI */
+ eeprom_init();
if (strcmp (argv[1], "read") == 0) {
printf(fmt, dev_addr, argv[1], addr, off, cnt);
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 19/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (17 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 18/25] eeprom: Suck the ifdef into eeprom_init() Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 20/25] eeprom: Pull out transfer length computation Marek Vasut
` (5 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Implement default value of 8 for this macro and pull out all of
this macro out of the code. The default value of 8 actually does
implement exactly the same behavior as the previous code which
was in the #else clause of the ifdef.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 97747de..6f55306 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -33,6 +33,13 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 0
#endif
+#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 8
+#endif
+
+#define EEPROM_PAGE_SIZE (1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
+#define EEPROM_PAGE_OFFSET(x) ((x) & (EEPROM_PAGE_SIZE - 1))
+
/*
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
* 0x000nxxxx for EEPROM address selectors@n, offset xxxx in EEPROM.
@@ -198,15 +205,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
*/
#if !defined(CONFIG_SYS_I2C_FRAM)
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
-
-#define EEPROM_PAGE_SIZE (1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
-#define EEPROM_PAGE_OFFSET(x) ((x) & (EEPROM_PAGE_SIZE - 1))
-
maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
-#else
- maxlen = 0x100 - blk_off;
-#endif
+
if (maxlen > I2C_RXTX_LEN)
maxlen = I2C_RXTX_LEN;
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 20/25] eeprom: Pull out transfer length computation
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (18 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 19/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 21/25] eeprom: Pull out the RW loop Marek Vasut
` (4 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Pull out the code which computes the length of the transfer
into separate code and clean it up a little. This again trims
down the code duplication.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 66 ++++++++++++++++++++---------------------------------
1 file changed, 25 insertions(+), 41 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 6f55306..231f424 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -104,6 +104,29 @@ static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
return alen;
}
+static int eeprom_len(unsigned offset, unsigned end)
+{
+ unsigned len = end - offset;
+
+ /*
+ * For a FRAM device there is no limit on the number of the
+ * bytes that can be ccessed with the single read or write
+ * operation.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+ unsigned blk_off = offset & 0xff;
+ unsigned maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
+
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+
+ if (len > maxlen)
+ len = maxlen;
+#endif
+
+ return len;
+}
+
static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
uchar *buffer, unsigned len, bool read)
{
@@ -130,7 +153,6 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
- unsigned blk_off;
int rcode = 0;
uchar addr[3];
@@ -141,27 +163,10 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
*/
while (offset < end) {
unsigned alen, len;
-#if !defined(CONFIG_SYS_I2C_FRAM)
- unsigned maxlen;
-#endif
- blk_off = offset & 0xFF; /* block offset */
alen = eeprom_addr(dev_addr, offset, addr);
- len = end - offset;
-
- /*
- * For a FRAM device there is no limit on the number of the
- * bytes that can be ccessed with the single read or write
- * operation.
- */
-#if !defined(CONFIG_SYS_I2C_FRAM)
- maxlen = 0x100 - blk_off;
- if (maxlen > I2C_RXTX_LEN)
- maxlen = I2C_RXTX_LEN;
- if (len > maxlen)
- len = maxlen;
-#endif
+ len = eeprom_len(offset, end);
rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
@@ -175,7 +180,6 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
- unsigned blk_off;
int rcode = 0;
uchar addr[3];
@@ -189,30 +193,10 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
while (offset < end) {
unsigned alen, len;
-#if !defined(CONFIG_SYS_I2C_FRAM)
- unsigned maxlen;
-#endif
- blk_off = offset & 0xFF; /* block offset */
alen = eeprom_addr(dev_addr, offset, addr);
- len = end - offset;
-
- /*
- * For a FRAM device there is no limit on the number of the
- * bytes that can be accessed with the single read or write
- * operation.
- */
-#if !defined(CONFIG_SYS_I2C_FRAM)
-
- maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
-
- if (maxlen > I2C_RXTX_LEN)
- maxlen = I2C_RXTX_LEN;
-
- if (len > maxlen)
- len = maxlen;
-#endif
+ len = eeprom_len(offset, end);
rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 21/25] eeprom: Pull out the RW loop
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (19 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 20/25] eeprom: Pull out transfer length computation Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 22/25] eeprom: Cultivate the ifdef mess Marek Vasut
` (3 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Unify the code for doing read/write into single function, since the
code for both the read and write is almost identical. This again
trims down the code duplication.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 51 +++++++++++++++++++++------------------------------
1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 231f424..6a02496 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -150,38 +150,44 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
return ret;
}
-int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
+ unsigned cnt, bool read)
{
unsigned end = offset + cnt;
+ unsigned alen, len;
int rcode = 0;
uchar addr[3];
- /*
- * Read data until done or would cross a page boundary.
- * We must write the address again when changing pages
- * because the next page may be in a different device.
- */
while (offset < end) {
- unsigned alen, len;
-
alen = eeprom_addr(dev_addr, offset, addr);
len = eeprom_len(offset, end);
- rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
+ rcode = eeprom_rw_block(offset, addr, alen, buffer, len, read);
buffer += len;
offset += len;
+
+ if (!read)
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
}
return rcode;
}
-int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
{
- unsigned end = offset + cnt;
- int rcode = 0;
- uchar addr[3];
+ /*
+ * Read data until done or would cross a page boundary.
+ * We must write the address again when changing pages
+ * because the next page may be in a different device.
+ */
+ return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
+}
+
+int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+ int ret;
eeprom_write_enable(dev_addr, 1);
@@ -190,25 +196,10 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
-
- while (offset < end) {
- unsigned alen, len;
-
- alen = eeprom_addr(dev_addr, offset, addr);
-
- len = eeprom_len(offset, end);
-
- rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
-
- buffer += len;
- offset += len;
-
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- }
+ ret = eeprom_rw(dev_addr, offset, buffer, cnt, 1);
eeprom_write_enable(dev_addr, 0);
-
- return rcode;
+ return ret;
}
static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 22/25] eeprom: Cultivate the ifdef mess
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (20 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 21/25] eeprom: Pull out the RW loop Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 23/25] eeprom: Add bus argument to eeprom_init() Marek Vasut
` (2 subsequent siblings)
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Just squash the ad-hoc ifdef chaos into single #else statement.
It's not worth having so many checks in place, since this only
leads to complicated code and if the first test for SPI && not
env in I2C EEPROM fails, then we're dealing with I2C EEPROM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 6a02496..5bc836f 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -62,24 +62,18 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
void eeprom_init(void)
{
-# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-
/* SPI EEPROM */
#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
- spi_init_f ();
-#endif
-
+ spi_init_f();
+#else
/* I2C EEPROM */
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) || \
- defined(CONFIG_SYS_I2C)
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
-#endif
-# endif /* !CONFIG_SPI */
+#endif
}
static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 23/25] eeprom: Add bus argument to eeprom_init()
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (21 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 22/25] eeprom: Cultivate the ifdef mess Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 24/25] eeprom: Add support for selecting i2c bus Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 25/25] eeprom: Clean up checkpatch issues Marek Vasut
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Add bus argument to eeprom_init(), so that it can select
the I2C bus number on which the eeprom resides. Any negative
value of the $bus argument will preserve the old behavior.
This is in place so that old code does not randomly break.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 7 ++++---
common/env_eeprom.c | 4 ++--
include/common.h | 2 +-
3 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 5bc836f..0133b50 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -60,7 +60,7 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
return 0;
}
-void eeprom_init(void)
+void eeprom_init(int bus)
{
/* SPI EEPROM */
#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
@@ -72,7 +72,8 @@ void eeprom_init(void)
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
-
+ if (bus >= 0)
+ i2c_set_bus_num(bus);
#endif
}
@@ -221,7 +222,7 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
off = simple_strtoul(*args++, NULL, 16);
cnt = simple_strtoul(*args++, NULL, 16);
- eeprom_init();
+ eeprom_init(-1);
if (strcmp (argv[1], "read") == 0) {
printf(fmt, dev_addr, argv[1], addr, off, cnt);
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 905d39a..d82e8da 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -153,7 +153,7 @@ int env_init(void)
uchar buf[64], flags[2];
int i, crc_ok[2] = {0, 0};
- eeprom_init(); /* prepare for EEPROM read/write */
+ eeprom_init(-1); /* prepare for EEPROM read/write */
off_env[0] = CONFIG_ENV_OFFSET;
off_env[1] = CONFIG_ENV_OFFSET_REDUND;
@@ -227,7 +227,7 @@ int env_init(void)
unsigned off;
uchar buf[64];
- eeprom_init(); /* prepare for EEPROM read/write */
+ eeprom_init(-1); /* prepare for EEPROM read/write */
/* read old CRC */
eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR,
diff --git a/include/common.h b/include/common.h
index 68596fc..ab70526 100644
--- a/include/common.h
+++ b/include/common.h
@@ -455,7 +455,7 @@ void reset_phy (void);
void fdc_hw_init (void);
/* $(BOARD)/eeprom.c */
-void eeprom_init (void);
+void eeprom_init (int bus);
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
#ifdef CONFIG_LWMON
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 24/25] eeprom: Add support for selecting i2c bus
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (22 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 23/25] eeprom: Add bus argument to eeprom_init() Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 25/25] eeprom: Clean up checkpatch issues Marek Vasut
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Add additional parameter into the eeprom command to select
the I2C bus on which the eeprom resides.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 0133b50..3b156ee 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -204,14 +204,21 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
char * const *args = &argv[2];
int rcode;
ulong dev_addr, addr, off, cnt;
+ int bus_addr;
switch (argc) {
#ifdef CONFIG_SYS_DEF_EEPROM_ADDR
case 5:
+ bus_addr = -1;
dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
break;
#endif
case 6:
+ bus_addr = -1;
+ dev_addr = simple_strtoul(*args++, NULL, 16);
+ break;
+ case 7:
+ bus_addr = simple_strtoul(*args++, NULL, 16);
dev_addr = simple_strtoul(*args++, NULL, 16);
break;
default:
@@ -222,7 +229,7 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
off = simple_strtoul(*args++, NULL, 16);
cnt = simple_strtoul(*args++, NULL, 16);
- eeprom_init(-1);
+ eeprom_init(bus_addr);
if (strcmp (argv[1], "read") == 0) {
printf(fmt, dev_addr, argv[1], addr, off, cnt);
@@ -244,9 +251,9 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
U_BOOT_CMD(
- eeprom, 6, 1, do_eeprom,
+ eeprom, 7, 1, do_eeprom,
"EEPROM sub-system",
- "read devaddr addr off cnt\n"
- "eeprom write devaddr addr off cnt\n"
+ "read <bus> <devaddr> addr off cnt\n"
+ "eeprom write <bus> <devaddr> addr off cnt\n"
" - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
)
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 25/25] eeprom: Clean up checkpatch issues
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
` (23 preceding siblings ...)
2014-10-20 1:48 ` [U-Boot] [PATCH 24/25] eeprom: Add support for selecting i2c bus Marek Vasut
@ 2014-10-20 1:48 ` Marek Vasut
24 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 1:48 UTC (permalink / raw)
To: u-boot
Cosmetic fixes to the file, make it checkpatch clean.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
common/cmd_eeprom.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 3b156ee..a619504 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -49,8 +49,8 @@
*/
#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
- (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
- (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
#endif
#endif
@@ -180,7 +180,8 @@ int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
}
-int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int eeprom_write(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
int ret;
@@ -231,19 +232,19 @@ static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
eeprom_init(bus_addr);
- if (strcmp (argv[1], "read") == 0) {
+ if (strcmp(argv[1], "read") == 0) {
printf(fmt, dev_addr, argv[1], addr, off, cnt);
- rcode = eeprom_read(dev_addr, off, (uchar *) addr, cnt);
+ rcode = eeprom_read(dev_addr, off, (uchar *)addr, cnt);
- puts ("done\n");
+ puts("done\n");
return rcode;
- } else if (strcmp (argv[1], "write") == 0) {
+ } else if (strcmp(argv[1], "write") == 0) {
printf(fmt, dev_addr, argv[1], addr, off, cnt);
- rcode = eeprom_write(dev_addr, off, (uchar *) addr, cnt);
+ rcode = eeprom_write(dev_addr, off, (uchar *)addr, cnt);
- puts ("done\n");
+ puts("done\n");
return rcode;
}
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
@ 2014-10-20 3:54 ` Masahiro Yamada
2014-10-20 14:49 ` Marek Vasut
2014-10-20 19:07 ` Wolfgang Denk
1 sibling, 1 reply; 37+ messages in thread
From: Masahiro Yamada @ 2014-10-20 3:54 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Mon, 20 Oct 2014 03:48:02 +0200
Marek Vasut <marex@denx.de> wrote:
> This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
> it so the EEPROM command code can be cleansed of the related code
> as well.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Heiko Schocher <hs@denx.de>
Can we do this all day long?
I am happy with 01/25 thru 07/25. :-)
There is only one item I can tell:
I know it is a tedious work, but can you
update doc/README.scrapyard, please?
It seems a rule in U-boot when dumping board supports.
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 3:54 ` Masahiro Yamada
@ 2014-10-20 14:49 ` Marek Vasut
2014-10-20 18:55 ` Wolfgang Denk
0 siblings, 1 reply; 37+ messages in thread
From: Marek Vasut @ 2014-10-20 14:49 UTC (permalink / raw)
To: u-boot
On Monday, October 20, 2014 at 05:54:18 AM, Masahiro Yamada wrote:
> Hi Marek,
Hi!
> On Mon, 20 Oct 2014 03:48:02 +0200
>
> Marek Vasut <marex@denx.de> wrote:
> > This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
> > it so the EEPROM command code can be cleansed of the related code
> > as well.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
> > Cc: Tom Rini <trini@ti.com>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Simon Glass <sjg@chromium.org>
> > Cc: Heiko Schocher <hs@denx.de>
>
> Can we do this all day long?
> I am happy with 01/25 thru 07/25. :-)
With pleasure ;-) Scrubbing old ad-hoc stuff is really enjoyable.
> There is only one item I can tell:
> I know it is a tedious work, but can you
> update doc/README.scrapyard, please?
> It seems a rule in U-boot when dumping board supports.
Ah, you're right, we have this thing. One thing I'm not sure about is how
is someone supposed to determine the commit in which the board was removed
before the commit was created in the upstream repository. This kinda doesn't
add up to me.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 14:49 ` Marek Vasut
@ 2014-10-20 18:55 ` Wolfgang Denk
2014-10-22 19:10 ` Marek Vasut
0 siblings, 1 reply; 37+ messages in thread
From: Wolfgang Denk @ 2014-10-20 18:55 UTC (permalink / raw)
To: u-boot
Dear Marek,
In message <201410201649.49448.marex@denx.de> you wrote:
>
> Ah, you're right, we have this thing. One thing I'm not sure about is how
> is someone supposed to determine the commit in which the board was removed
> before the commit was created in the upstream repository. This kinda doesn't
> add up to me.
You just insert place holders for the boards you are touching, and fix
up older entries that already hit mainline.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How many seconds are there in a year? If I tell you there are 3.155 x
10^7, you won't even try to remember it. On the other hand, who could
forget that, to within half a percent, pi seconds is a nanocentury.
-- Tom Duff, Bell Labs
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
2014-10-20 3:54 ` Masahiro Yamada
@ 2014-10-20 19:07 ` Wolfgang Denk
1 sibling, 0 replies; 37+ messages in thread
From: Wolfgang Denk @ 2014-10-20 19:07 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <1413769706-8596-2-git-send-email-marex@denx.de> you wrote:
> This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
> it so the EEPROM command code can be cleansed of the related code
> as well.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Heiko Schocher <hs@denx.de>
Assuming you also add an entry to scrapyard:
Acked-by: Wolfgang Denk <wd@denx.de>
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To make this work we'd need a patch, as nobody of us tests this.
- L. Poettering in https://bugs.freedesktop.org/show_bug.cgi?id=74589
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board
2014-10-20 1:48 ` [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board Marek Vasut
@ 2014-10-20 19:08 ` Wolfgang Denk
0 siblings, 0 replies; 37+ messages in thread
From: Wolfgang Denk @ 2014-10-20 19:08 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <1413769706-8596-7-git-send-email-marex@denx.de> you wrote:
> This board is old and is using CONFIG_I2C_X, which is wrong.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Heiko Schocher <hs@denx.de>
Assuming you also add an entry to scrapyard:
Acked-by: Wolfgang Denk <wd@denx.de>
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is better to be silent and thought a fool then to speak and remove
all doubt.
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board
2014-10-20 1:48 ` [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board Marek Vasut
@ 2014-10-20 19:08 ` Wolfgang Denk
0 siblings, 0 replies; 37+ messages in thread
From: Wolfgang Denk @ 2014-10-20 19:08 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <1413769706-8596-8-git-send-email-marex@denx.de> you wrote:
> This board is old and is using CONFIG_I2C_X, which is wrong.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Heiko Schocher <hs@denx.de>
Assuming you also add an entry to scrapyard:
Acked-by: Wolfgang Denk <wd@denx.de>
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
At the source of every error which is blamed on the computer you will
find at least two human errors, including the error of blaming it on
the computer.
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-20 18:55 ` Wolfgang Denk
@ 2014-10-22 19:10 ` Marek Vasut
2014-10-23 2:26 ` Masahiro Yamada
0 siblings, 1 reply; 37+ messages in thread
From: Marek Vasut @ 2014-10-22 19:10 UTC (permalink / raw)
To: u-boot
On Monday, October 20, 2014 at 08:55:29 PM, Wolfgang Denk wrote:
> Dear Marek,
>
> In message <201410201649.49448.marex@denx.de> you wrote:
> > Ah, you're right, we have this thing. One thing I'm not sure about is how
> > is someone supposed to determine the commit in which the board was
> > removed before the commit was created in the upstream repository. This
> > kinda doesn't add up to me.
>
> You just insert place holders for the boards you are touching, and fix
> up older entries that already hit mainline.
I wonder if we shouldn't get rid of this README.scrapyard. Personally, I
don't find much value in it to be honest ; if I am looking for some ancient
board, I just do git log -p and search for whatever I need.
That said, I will fix up the patches ... also, I will split the removal
from the eeprom changes, so the removal doesn't block the eeprom stuff.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-22 19:10 ` Marek Vasut
@ 2014-10-23 2:26 ` Masahiro Yamada
2014-10-24 14:37 ` Marek Vasut
0 siblings, 1 reply; 37+ messages in thread
From: Masahiro Yamada @ 2014-10-23 2:26 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Wed, 22 Oct 2014 21:10:28 +0200
Marek Vasut <marex@denx.de> wrote:
> On Monday, October 20, 2014 at 08:55:29 PM, Wolfgang Denk wrote:
> > Dear Marek,
> >
> > In message <201410201649.49448.marex@denx.de> you wrote:
> > > Ah, you're right, we have this thing. One thing I'm not sure about is how
> > > is someone supposed to determine the commit in which the board was
> > > removed before the commit was created in the upstream repository. This
> > > kinda doesn't add up to me.
> >
> > You just insert place holders for the boards you are touching, and fix
> > up older entries that already hit mainline.
>
> I wonder if we shouldn't get rid of this README.scrapyard. Personally, I
> don't find much value in it to be honest ; if I am looking for some ancient
> board, I just do git log -p and search for whatever I need.
I stick to it if this rule is a decision of u-boot community, but I have also been wondering it.
It is true we need some effort to maintain this file.
Maybe you should open a new thread to discuss removal of doc/README.scrapyard.
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board
2014-10-23 2:26 ` Masahiro Yamada
@ 2014-10-24 14:37 ` Marek Vasut
0 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2014-10-24 14:37 UTC (permalink / raw)
To: u-boot
On Thursday, October 23, 2014 at 04:26:07 AM, Masahiro Yamada wrote:
> Hi Marek,
Hello!
> On Wed, 22 Oct 2014 21:10:28 +0200
>
> Marek Vasut <marex@denx.de> wrote:
> > On Monday, October 20, 2014 at 08:55:29 PM, Wolfgang Denk wrote:
> > > Dear Marek,
> > >
> > > In message <201410201649.49448.marex@denx.de> you wrote:
> > > > Ah, you're right, we have this thing. One thing I'm not sure about is
> > > > how is someone supposed to determine the commit in which the board
> > > > was removed before the commit was created in the upstream
> > > > repository. This kinda doesn't add up to me.
> > >
> > > You just insert place holders for the boards you are touching, and fix
> > > up older entries that already hit mainline.
> >
> > I wonder if we shouldn't get rid of this README.scrapyard. Personally, I
> > don't find much value in it to be honest ; if I am looking for some
> > ancient board, I just do git log -p and search for whatever I need.
>
> I stick to it if this rule is a decision of u-boot community, but I have
> also been wondering it. It is true we need some effort to maintain this
> file.
>
> Maybe you should open a new thread to discuss removal of
> doc/README.scrapyard.
You're right, done!
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 37+ messages in thread
* [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command
2014-10-20 1:48 ` [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom Marek Vasut
@ 2014-11-04 16:01 ` Andreas Bießmann
2015-11-10 19:10 ` Marek Vasut
0 siblings, 1 reply; 37+ messages in thread
From: Andreas Bießmann @ 2014-11-04 16:01 UTC (permalink / raw)
To: u-boot
This rewrite uses lately promoted eeprom_init(int) function to choose the
right I2C bus when writing data to the EEPROM.
Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
Cc: Marek Vasut <marex@denx.de>
---
Hi Marek,
works this for you? I can't kill the i2c_read() cause eeprom_read() will blow
up my SPL size.
While you are on it, there are some other eeprom implementations (freescale)
not yet covered by your removal.
regards
Andreas Bie?mann
board/corscience/tricorder/tricorder-eeprom.c | 36 +++++++--------------------
1 file changed, 9 insertions(+), 27 deletions(-)
diff --git a/board/corscience/tricorder/tricorder-eeprom.c b/board/corscience/tricorder/tricorder-eeprom.c
index 1c74a0f..340a009 100644
--- a/board/corscience/tricorder/tricorder-eeprom.c
+++ b/board/corscience/tricorder/tricorder-eeprom.c
@@ -77,17 +77,13 @@ static int handle_eeprom_v1(struct tricorder_eeprom *eeprom)
int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom)
{
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
unsigned int bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
i2c_read(addr, 0, 2, (unsigned char *)eeprom, TRICORDER_EEPROM_SIZE);
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
i2c_set_bus_num(bus);
-#endif
if (be32_to_cpu(eeprom->magic) != TRICORDER_EEPROM_MAGIC) {
warn_wrong_value("magic", TRICORDER_EEPROM_MAGIC,
@@ -138,9 +134,6 @@ int tricorder_eeprom_write(unsigned devaddr, const char *name,
int ret;
unsigned char *p;
int i;
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- unsigned int bus;
-#endif
memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
memset(eeprom_verify, 0, TRICORDER_EEPROM_SIZE);
@@ -172,33 +165,23 @@ int tricorder_eeprom_write(unsigned devaddr, const char *name,
print_buffer(0, &eeprom, 1, sizeof(eeprom), 16);
#endif
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- bus = i2c_get_bus_num();
- i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
+ eeprom_init(CONFIG_SYS_EEPROM_BUS_NUM);
- /* do page write to the eeprom */
- for (i = 0, p = (unsigned char *)&eeprom;
- i < sizeof(eeprom);
- i += 32, p += 32) {
- ret = i2c_write(devaddr, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- p, min(sizeof(eeprom) - i, 32));
- if (ret)
- break;
- udelay(5000); /* 5ms write cycle timing */
- }
+ ret = eeprom_write(devaddr, 0, (unsigned char *)&eeprom,
+ TRICORDER_EEPROM_SIZE);
+ if (ret)
+ printf("Tricorder: Could not write EEPROM content!\n");
- ret = i2c_read(devaddr, 0, 2, (unsigned char *)&eeprom_verify,
+ ret = eeprom_read(devaddr, 0, (unsigned char *)&eeprom_verify,
TRICORDER_EEPROM_SIZE);
+ if (ret)
+ printf("Tricorder: Could not read EEPROM content!\n");
if (memcmp(&eeprom, &eeprom_verify, sizeof(eeprom)) != 0) {
printf("Tricorder: Could not verify EEPROM content!\n");
ret = 1;
}
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
- i2c_set_bus_num(bus);
-#endif
return ret;
}
@@ -206,7 +189,7 @@ int do_tricorder_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc == 3) {
ulong dev_addr = simple_strtoul(argv[2], NULL, 16);
- eeprom_init();
+
if (strcmp(argv[1], "read") == 0) {
int rcode;
@@ -220,7 +203,6 @@ int do_tricorder_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
char *version = argv[4];
char *serial = argv[5];
char *interface = NULL;
- eeprom_init();
if (argc == 7)
interface = argv[6];
--
2.1.1
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command
2014-11-04 16:01 ` [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command Andreas Bießmann
@ 2015-11-10 19:10 ` Marek Vasut
0 siblings, 0 replies; 37+ messages in thread
From: Marek Vasut @ 2015-11-10 19:10 UTC (permalink / raw)
To: u-boot
On Tuesday, November 04, 2014 at 05:01:47 PM, Andreas Bie?mann wrote:
> This rewrite uses lately promoted eeprom_init(int) function to choose the
> right I2C bus when writing data to the EEPROM.
>
> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
> Cc: Marek Vasut <marex@denx.de>
I am back! Yes, picked this up, thanks!
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2015-11-10 19:10 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-20 1:48 [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board Marek Vasut
2014-10-20 3:54 ` Masahiro Yamada
2014-10-20 14:49 ` Marek Vasut
2014-10-20 18:55 ` Wolfgang Denk
2014-10-22 19:10 ` Marek Vasut
2014-10-23 2:26 ` Masahiro Yamada
2014-10-24 14:37 ` Marek Vasut
2014-10-20 19:07 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 02/25] ppc: Zap MHPC board Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 03/25] ppc: Zap Hymod board Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 04/25] ppc: Zap HWW1U1A board Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 05/25] ppc: Zap IDS8247 board Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board Marek Vasut
2014-10-20 19:08 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board Marek Vasut
2014-10-20 19:08 ` Wolfgang Denk
2014-10-20 1:48 ` [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom Marek Vasut
2014-11-04 16:01 ` [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command Andreas Bießmann
2015-11-10 19:10 ` Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 09/25] eeprom: Shuffle code around Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 10/25] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 11/25] eeprom: Zap CONFIG_SYS_EEPROM_X40430 Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 12/25] eeprom: Zap eeprom_probe() Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 13/25] eeprom: Zap CONFIG_SPI_X Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 14/25] eeprom: Pull out the I/O code Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 15/25] eeprom: Pull out address computation Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 16/25] eeprom: Make eeprom_write_enable() weak Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 17/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 18/25] eeprom: Suck the ifdef into eeprom_init() Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 19/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 20/25] eeprom: Pull out transfer length computation Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 21/25] eeprom: Pull out the RW loop Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 22/25] eeprom: Cultivate the ifdef mess Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 23/25] eeprom: Add bus argument to eeprom_init() Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 24/25] eeprom: Add support for selecting i2c bus Marek Vasut
2014-10-20 1:48 ` [U-Boot] [PATCH 25/25] eeprom: Clean up checkpatch issues Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.