[PATCH v2 0/3] Add Reset Controller for MediaTek SoC

[PATCH v2 0/3] Add Reset Controller for MediaTek SoC

[Flora Fu]

Hi,
The patch modification is base on https://lkml.org/lkml/2014/5/27/422

Changes since v1
================
(1) Patch 1/3: Update reset controller driver's implementation. 
  - rename mt_ prefixes to the prefix mtk_
  - use module_platform_driver() macro for driver init.
  - clean up includes of header files.
  - reset controll is a child of syscon. Get regamp through its parent node.
  - rename data->size to data->num_regs. It is number of registers in syscon for reset usage. 
(2) Patch 2/3: update bindings document according to new dts layout of reset-controller. 
(3) Patch 3/3: change reset-controller device node as child of syscon. 

This driver is based on 3.18-rc1.

Flora Fu (3):
  ARM: mediatek: Add Reset Controller for MediaTek SoC
  dt-bindings: Add Reset Controller for MediaTek SoC
  ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

 .../devicetree/bindings/reset/mediatek,reset.txt   |  45 +++++++
 arch/arm/boot/dts/mt8135.dtsi                      |  26 ++++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-mtk.c                          | 131 +++++++++++++++++++++
 4 files changed, 203 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
 create mode 100644 drivers/reset/reset-mtk.c

--
1.8.1.1.dirty

[PATCH v2 0/3] Add Reset Controller for MediaTek SoC

[Flora Fu]

Hi,
The patch modification is base on https://lkml.org/lkml/2014/5/27/422

Changes since v1
================
(1) Patch 1/3: Update reset controller driver's implementation. 
  - rename mt_ prefixes to the prefix mtk_
  - use module_platform_driver() macro for driver init.
  - clean up includes of header files.
  - reset controll is a child of syscon. Get regamp through its parent node.
  - rename data->size to data->num_regs. It is number of registers in syscon for reset usage. 
(2) Patch 2/3: update bindings document according to new dts layout of reset-controller. 
(3) Patch 3/3: change reset-controller device node as child of syscon. 

This driver is based on 3.18-rc1.

Flora Fu (3):
  ARM: mediatek: Add Reset Controller for MediaTek SoC
  dt-bindings: Add Reset Controller for MediaTek SoC
  ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

 .../devicetree/bindings/reset/mediatek,reset.txt   |  45 +++++++
 arch/arm/boot/dts/mt8135.dtsi                      |  26 ++++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-mtk.c                          | 131 +++++++++++++++++++++
 4 files changed, 203 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
 create mode 100644 drivers/reset/reset-mtk.c

--
1.8.1.1.dirty


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/3] Add Reset Controller for MediaTek SoC

[Flora Fu]

Hi,
The patch modification is base on https://lkml.org/lkml/2014/5/27/422

Changes since v1
================
(1) Patch 1/3: Update reset controller driver's implementation. 
  - rename mt_ prefixes to the prefix mtk_
  - use module_platform_driver() macro for driver init.
  - clean up includes of header files.
  - reset controll is a child of syscon. Get regamp through its parent node.
  - rename data->size to data->num_regs. It is number of registers in syscon for reset usage. 
(2) Patch 2/3: update bindings document according to new dts layout of reset-controller. 
(3) Patch 3/3: change reset-controller device node as child of syscon. 

This driver is based on 3.18-rc1.

Flora Fu (3):
  ARM: mediatek: Add Reset Controller for MediaTek SoC
  dt-bindings: Add Reset Controller for MediaTek SoC
  ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

 .../devicetree/bindings/reset/mediatek,reset.txt   |  45 +++++++
 arch/arm/boot/dts/mt8135.dtsi                      |  26 ++++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-mtk.c                          | 131 +++++++++++++++++++++
 4 files changed, 203 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
 create mode 100644 drivers/reset/reset-mtk.c

--
1.8.1.1.dirty

[PATCH v2 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add a driver in reset controller.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 drivers/reset/Makefile    |   1 +
 drivers/reset/reset-mtk.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)
 create mode 100644 drivers/reset/reset-mtk.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 60fed3d..adcebdf 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_RESET_CONTROLLER) += core.o
 obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_MEDIATEK) += reset-mtk.o
diff --git a/drivers/reset/reset-mtk.c b/drivers/reset/reset-mtk.c
new file mode 100644
index 0000000..7d792ec
--- /dev/null
+++ b/drivers/reset/reset-mtk.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora.Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct mtk_reset_data {
+	struct regmap *regmap;
+	u32 resetbase;
+	u32 num_regs;
+	struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, mask);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, ~mask);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+	.assert = mtk_reset_assert,
+	.deassert = mtk_reset_deassert,
+};
+
+static int mtk_reset_probe(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	u32 reg[2];
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	syscon_np = of_get_parent(np);
+	data->regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&pdev->dev, "couldn't get syscon-reset regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+	ret = of_property_read_u32_array(np, "reg", reg, 2);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't read reset base from syscon!\n");
+		return -EINVAL;
+	}
+
+	data->resetbase = reg[0];
+	data->num_regs = reg[1] >> 2;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = data->num_regs * 32;
+	data->rcdev.ops = &mtk_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int mtk_reset_remove(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id mtk_reset_dt_ids[] = {
+	{ .compatible = "mediatek,reset", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_reset_dt_ids);
+
+static struct platform_driver mtk_reset_driver = {
+	.probe = mtk_reset_probe,
+	.remove = mtk_reset_remove,
+	.driver = {
+		.name = "mtk-reset",
+		.owner = THIS_MODULE,
+		.of_match_table = mtk_reset_dt_ids,
+	},
+};
+
+module_platform_driver(mtk_reset_driver);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC Generic Reset Controller");
+MODULE_LICENSE("GPL");
-- 
1.8.1.1.dirty

[PATCH v2 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add a driver in reset controller.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 drivers/reset/Makefile    |   1 +
 drivers/reset/reset-mtk.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)
 create mode 100644 drivers/reset/reset-mtk.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 60fed3d..adcebdf 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_RESET_CONTROLLER) += core.o
 obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_MEDIATEK) += reset-mtk.o
diff --git a/drivers/reset/reset-mtk.c b/drivers/reset/reset-mtk.c
new file mode 100644
index 0000000..7d792ec
--- /dev/null
+++ b/drivers/reset/reset-mtk.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora.Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct mtk_reset_data {
+	struct regmap *regmap;
+	u32 resetbase;
+	u32 num_regs;
+	struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, mask);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, ~mask);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+	.assert = mtk_reset_assert,
+	.deassert = mtk_reset_deassert,
+};
+
+static int mtk_reset_probe(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	u32 reg[2];
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	syscon_np = of_get_parent(np);
+	data->regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&pdev->dev, "couldn't get syscon-reset regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+	ret = of_property_read_u32_array(np, "reg", reg, 2);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't read reset base from syscon!\n");
+		return -EINVAL;
+	}
+
+	data->resetbase = reg[0];
+	data->num_regs = reg[1] >> 2;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = data->num_regs * 32;
+	data->rcdev.ops = &mtk_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int mtk_reset_remove(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id mtk_reset_dt_ids[] = {
+	{ .compatible = "mediatek,reset", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_reset_dt_ids);
+
+static struct platform_driver mtk_reset_driver = {
+	.probe = mtk_reset_probe,
+	.remove = mtk_reset_remove,
+	.driver = {
+		.name = "mtk-reset",
+		.owner = THIS_MODULE,
+		.of_match_table = mtk_reset_dt_ids,
+	},
+};
+
+module_platform_driver(mtk_reset_driver);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC Generic Reset Controller");
+MODULE_LICENSE("GPL");
-- 
1.8.1.1.dirty

[PATCH v2 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add a driver in reset controller.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 drivers/reset/Makefile    |   1 +
 drivers/reset/reset-mtk.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)
 create mode 100644 drivers/reset/reset-mtk.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 60fed3d..adcebdf 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_RESET_CONTROLLER) += core.o
 obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_MEDIATEK) += reset-mtk.o
diff --git a/drivers/reset/reset-mtk.c b/drivers/reset/reset-mtk.c
new file mode 100644
index 0000000..7d792ec
--- /dev/null
+++ b/drivers/reset/reset-mtk.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora.Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct mtk_reset_data {
+	struct regmap *regmap;
+	u32 resetbase;
+	u32 num_regs;
+	struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, mask);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct regmap *regmap;
+	u32 addr;
+	u32 mask;
+	struct mtk_reset_data *data = container_of(rcdev,
+						     struct mtk_reset_data,
+						     rcdev);
+
+	regmap = data->regmap;
+	addr = data->resetbase + ((id / 32) << 2);
+	mask = BIT(id % 32);
+
+	return regmap_update_bits(regmap, addr, mask, ~mask);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+	.assert = mtk_reset_assert,
+	.deassert = mtk_reset_deassert,
+};
+
+static int mtk_reset_probe(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	u32 reg[2];
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	syscon_np = of_get_parent(np);
+	data->regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&pdev->dev, "couldn't get syscon-reset regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+	ret = of_property_read_u32_array(np, "reg", reg, 2);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't read reset base from syscon!\n");
+		return -EINVAL;
+	}
+
+	data->resetbase = reg[0];
+	data->num_regs = reg[1] >> 2;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = data->num_regs * 32;
+	data->rcdev.ops = &mtk_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int mtk_reset_remove(struct platform_device *pdev)
+{
+	struct mtk_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id mtk_reset_dt_ids[] = {
+	{ .compatible = "mediatek,reset", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_reset_dt_ids);
+
+static struct platform_driver mtk_reset_driver = {
+	.probe = mtk_reset_probe,
+	.remove = mtk_reset_remove,
+	.driver = {
+		.name = "mtk-reset",
+		.owner = THIS_MODULE,
+		.of_match_table = mtk_reset_dt_ids,
+	},
+};
+
+module_platform_driver(mtk_reset_driver);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC Generic Reset Controller");
+MODULE_LICENSE("GPL");
-- 
1.8.1.1.dirty

[PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add device tree bindings.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 .../devicetree/bindings/reset/mediatek,reset.txt   | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt

diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..3c5687b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,45 @@
+MediaTek SoC Reset Controller
+======================================
+The reset controller driver accesses registers through the syscon regmap. It
+is a child node of syscon.
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- reg: The register region can be accessed from syscon. The first parameter is
+  reset base address offset. The second parameter is byte width of reset registers.
+
+example:
+infracfg: syscon@10001000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "mediatek,mt8135-infracfg", "syscon";
+	reg = <0 0x10001000 0 0x1000>;
+
+	infrarst: reset-controller@30 {
+		#reset-cells = <1>;
+		compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+		reg = <0x30 0x8>;
+	};
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap@1000f000 {
+	compatible = "mediatek,mt8135-pwrap";
+	reg = <0 0x1000f000 0 0x1000>,
+		<0 0x11017000 0 0x1000>;
+	reg-names = "pwrap-base",
+		"pwrap-bridge-base";
+	resets = <&infrarst 7>, <&perirst 34>;
+	reset-names = "infrarst", "perirst";
+};
-- 
1.8.1.1.dirty

[PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add device tree bindings.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 .../devicetree/bindings/reset/mediatek,reset.txt   | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt

diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..3c5687b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,45 @@
+MediaTek SoC Reset Controller
+======================================
+The reset controller driver accesses registers through the syscon regmap. It
+is a child node of syscon.
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- reg: The register region can be accessed from syscon. The first parameter is
+  reset base address offset. The second parameter is byte width of reset registers.
+
+example:
+infracfg: syscon@10001000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "mediatek,mt8135-infracfg", "syscon";
+	reg = <0 0x10001000 0 0x1000>;
+
+	infrarst: reset-controller@30 {
+		#reset-cells = <1>;
+		compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+		reg = <0x30 0x8>;
+	};
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap@1000f000 {
+	compatible = "mediatek,mt8135-pwrap";
+	reg = <0 0x1000f000 0 0x1000>,
+		<0 0x11017000 0 0x1000>;
+	reg-names = "pwrap-base",
+		"pwrap-bridge-base";
+	resets = <&infrarst 7>, <&perirst 34>;
+	reset-names = "infrarst", "perirst";
+};
-- 
1.8.1.1.dirty

[PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add device tree bindings.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 .../devicetree/bindings/reset/mediatek,reset.txt   | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt

diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..3c5687b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,45 @@
+MediaTek SoC Reset Controller
+======================================
+The reset controller driver accesses registers through the syscon regmap. It
+is a child node of syscon.
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- reg: The register region can be accessed from syscon. The first parameter is
+  reset base address offset. The second parameter is byte width of reset registers.
+
+example:
+infracfg: syscon at 10001000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "mediatek,mt8135-infracfg", "syscon";
+	reg = <0 0x10001000 0 0x1000>;
+
+	infrarst: reset-controller at 30 {
+		#reset-cells = <1>;
+		compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+		reg = <0x30 0x8>;
+	};
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap at 1000f000 {
+	compatible = "mediatek,mt8135-pwrap";
+	reg = <0 0x1000f000 0 0x1000>,
+		<0 0x11017000 0 0x1000>;
+	reg-names = "pwrap-base",
+		"pwrap-bridge-base";
+	resets = <&infrarst 7>, <&perirst 34>;
+	reset-names = "infrarst", "perirst";
+};
-- 
1.8.1.1.dirty

[PATCH v2 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add reset controller to MT8135 board dts.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 arch/arm/boot/dts/mt8135.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 90a56ad..259a2b5 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -102,6 +102,32 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		infracfg: syscon@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+
+			infrarst: reset-controller@30 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+				reg = <0x30 0x8>;
+			};
+		};
+
+		pericfg: syscon@10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+
+			perirst: reset-controller@00 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-pericfg-reset", "mediatek,reset";
+				reg = <0x00 0x8>;
+			};
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
-- 
1.8.1.1.dirty

[PATCH v2 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add reset controller to MT8135 board dts.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 arch/arm/boot/dts/mt8135.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 90a56ad..259a2b5 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -102,6 +102,32 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		infracfg: syscon@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+
+			infrarst: reset-controller@30 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+				reg = <0x30 0x8>;
+			};
+		};
+
+		pericfg: syscon@10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+
+			perirst: reset-controller@00 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-pericfg-reset", "mediatek,reset";
+				reg = <0x00 0x8>;
+			};
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
-- 
1.8.1.1.dirty

[PATCH v2 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

[Flora Fu]

Add reset controller to MT8135 board dts.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
 arch/arm/boot/dts/mt8135.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 90a56ad..259a2b5 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -102,6 +102,32 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		infracfg: syscon at 10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+
+			infrarst: reset-controller at 30 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+				reg = <0x30 0x8>;
+			};
+		};
+
+		pericfg: syscon at 10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+
+			perirst: reset-controller at 00 {
+				#reset-cells = <1>;
+				compatible = "mediatek,mt8135-pericfg-reset", "mediatek,reset";
+				reg = <0x00 0x8>;
+			};
+		};
+
 		gic: interrupt-controller at 10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
-- 
1.8.1.1.dirty

Re: [PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Hi Flora,

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add device tree bindings.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> ---
>  .../devicetree/bindings/reset/mediatek,reset.txt   | 45 ++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
> new file mode 100644
> index 0000000..3c5687b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
> @@ -0,0 +1,45 @@
> +MediaTek SoC Reset Controller
> +======================================
> +The reset controller driver accesses registers through the syscon regmap. It
> +is a child node of syscon.
> +
> +Required properties:
> +- compatible : "mediatek,reset"
> +- #reset-cells: 1
> +- reg: The register region can be accessed from syscon. The first parameter is
> +  reset base address offset. The second parameter is byte width of reset registers.
> +
> +example:
> +infracfg: syscon@10001000 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;

Since we use reg = <0x30 0x8> below, #size-cells should be set to <1>.

I have updated the syscon child support patch and fixed the binding
documentation to allow this. Previously I had only thought about
children that use a single register or just a bitfield in a single
register.

With that change, feel free to consider this patch
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

> +	compatible = "mediatek,mt8135-infracfg", "syscon";
> +	reg = <0 0x10001000 0 0x1000>;
> +
> +	infrarst: reset-controller@30 {
> +		#reset-cells = <1>;
> +		compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
> +		reg = <0x30 0x8>;
> +	};
> +};
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The reset controller(mtk-reset) manages various reset sources. Those device nodes should
> +specify the reset line on the rstc in their resets property, containing a phandle to the
> +rstc device node and a RESET_INDEX specifying which module to reset, as described in
> +reset.txt.
> +
> +For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
> +
> +example:
> +pwrap: pwrap@1000f000 {
> +	compatible = "mediatek,mt8135-pwrap";
> +	reg = <0 0x1000f000 0 0x1000>,
> +		<0 0x11017000 0 0x1000>;
> +	reg-names = "pwrap-base",
> +		"pwrap-bridge-base";
> +	resets = <&infrarst 7>, <&perirst 34>;

Maybe it would be useful to add a header with #defines for these reset
bit indices?

> +	reset-names = "infrarst", "perirst";
> +};

regards
Philipp

[PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Hi Flora,

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add device tree bindings.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> ---
>  .../devicetree/bindings/reset/mediatek,reset.txt   | 45 ++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
> new file mode 100644
> index 0000000..3c5687b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
> @@ -0,0 +1,45 @@
> +MediaTek SoC Reset Controller
> +======================================
> +The reset controller driver accesses registers through the syscon regmap. It
> +is a child node of syscon.
> +
> +Required properties:
> +- compatible : "mediatek,reset"
> +- #reset-cells: 1
> +- reg: The register region can be accessed from syscon. The first parameter is
> +  reset base address offset. The second parameter is byte width of reset registers.
> +
> +example:
> +infracfg: syscon at 10001000 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;

Since we use reg = <0x30 0x8> below, #size-cells should be set to <1>.

I have updated the syscon child support patch and fixed the binding
documentation to allow this. Previously I had only thought about
children that use a single register or just a bitfield in a single
register.

With that change, feel free to consider this patch
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

> +	compatible = "mediatek,mt8135-infracfg", "syscon";
> +	reg = <0 0x10001000 0 0x1000>;
> +
> +	infrarst: reset-controller at 30 {
> +		#reset-cells = <1>;
> +		compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
> +		reg = <0x30 0x8>;
> +	};
> +};
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The reset controller(mtk-reset) manages various reset sources. Those device nodes should
> +specify the reset line on the rstc in their resets property, containing a phandle to the
> +rstc device node and a RESET_INDEX specifying which module to reset, as described in
> +reset.txt.
> +
> +For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
> +
> +example:
> +pwrap: pwrap at 1000f000 {
> +	compatible = "mediatek,mt8135-pwrap";
> +	reg = <0 0x1000f000 0 0x1000>,
> +		<0 0x11017000 0 0x1000>;
> +	reg-names = "pwrap-base",
> +		"pwrap-bridge-base";
> +	resets = <&infrarst 7>, <&perirst 34>;

Maybe it would be useful to add a header with #defines for these reset
bit indices?

> +	reset-names = "infrarst", "perirst";
> +};

regards
Philipp

Re: [PATCH v2 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add reset controller to MT8135 board dts.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> ---
>  arch/arm/boot/dts/mt8135.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index 90a56ad..259a2b5 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -102,6 +102,32 @@
>  			clock-names = "system-clk", "rtc-clk";
>  		};
>  
> +		infracfg: syscon@10001000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

Same as with patch 2, please use #size-cells = <1>.

> +			compatible = "mediatek,mt8135-infracfg", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +
> +			infrarst: reset-controller@30 {
> +				#reset-cells = <1>;
> +				compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
> +				reg = <0x30 0x8>;
> +			};
> +		};
> +
> +		pericfg: syscon@10003000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

And here. Other than that,
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

> +			compatible = "mediatek,mt8135-pericfg", "syscon";
> +			reg = <0 0x10003000 0 0x1000>;
> +
> +			perirst: reset-controller@00 {
> +				#reset-cells = <1>;
> +				compatible = "mediatek,mt8135-pericfg-reset", "mediatek,reset";
> +				reg = <0x00 0x8>;
> +			};
> +		};
> +
>  		gic: interrupt-controller@10211000 {
>  			compatible = "arm,cortex-a15-gic";
>  			interrupt-controller;

regards
Philipp

[PATCH v2 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add reset controller to MT8135 board dts.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
> ---
>  arch/arm/boot/dts/mt8135.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index 90a56ad..259a2b5 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -102,6 +102,32 @@
>  			clock-names = "system-clk", "rtc-clk";
>  		};
>  
> +		infracfg: syscon at 10001000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

Same as with patch 2, please use #size-cells = <1>.

> +			compatible = "mediatek,mt8135-infracfg", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +
> +			infrarst: reset-controller at 30 {
> +				#reset-cells = <1>;
> +				compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
> +				reg = <0x30 0x8>;
> +			};
> +		};
> +
> +		pericfg: syscon at 10003000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

And here. Other than that,
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

> +			compatible = "mediatek,mt8135-pericfg", "syscon";
> +			reg = <0 0x10003000 0 0x1000>;
> +
> +			perirst: reset-controller at 00 {
> +				#reset-cells = <1>;
> +				compatible = "mediatek,mt8135-pericfg-reset", "mediatek,reset";
> +				reg = <0x00 0x8>;
> +			};
> +		};
> +
>  		gic: interrupt-controller at 10211000 {
>  			compatible = "arm,cortex-a15-gic";
>  			interrupt-controller;

regards
Philipp

Re: [PATCH v2 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add a driver in reset controller.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
[...]

This version looks good to me. I'm going to apply it as soon as there is
agreement on the syscon child device patch.

regards
Philipp

[PATCH v2 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC

[Philipp Zabel]

Am Montag, den 03.11.2014, 17:02 +0800 schrieb Flora Fu:
> Add a driver in reset controller.
> 
> Signed-off-by: Flora Fu <flora.fu@mediatek.com>
[...]

This version looks good to me. I'm going to apply it as soon as there is
agreement on the syscon child device patch.

regards
Philipp