All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xudong Chen <xudong.chen@mediatek.com>
To: Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Wolfram Sang <wsa@the-dreams.de>
Cc: <srv_heupstream@mediatek.com>,
	Sascha Hauer <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Grant Likely <grant.likely@linaro.org>,
	Xudong Chen <xudong.chen@mediatek.com>,
	Jean Delvare <jdelvare@suse.de>, Arnd Bergmann <arnd@arndb.de>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-i2c@vger.kernel.org>,
	Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	Nathan Chung <nathan.chung@mediatek.com>,
	YH Chen <yh.chen@mediatek.com>
Subject: [PATCH v3 1/2] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date: Mon, 24 Nov 2014 17:38:47 +0800	[thread overview]
Message-ID: <1416821928-11453-2-git-send-email-xudong.chen@mediatek.com> (raw)
In-Reply-To: <1416821928-11453-1-git-send-email-xudong.chen@mediatek.com>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
Change-Id: Iaaba1e8420abfbfb503501310de04ee25ae72e18
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..08f86c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,40 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+	i2c0: i2c@1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <100000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+
-- 
1.8.1.1.dirty


WARNING: multiple messages have this Message-ID (diff)
From: Xudong Chen <xudong.chen@mediatek.com>
To: Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Wolfram Sang <wsa@the-dreams.de>
Cc: srv_heupstream@mediatek.com, Sascha Hauer <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Grant Likely <grant.likely@linaro.org>,
	Xudong Chen <xudong.chen@mediatek.com>,
	Jean Delvare <jdelvare@suse.de>, Arnd Bergmann <arnd@arndb.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	Nathan Chung <nathan.chung@mediatek.com>,
	YH Chen <yh.chen@mediatek.com>
Subject: [PATCH v3 1/2] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date: Mon, 24 Nov 2014 17:38:47 +0800	[thread overview]
Message-ID: <1416821928-11453-2-git-send-email-xudong.chen@mediatek.com> (raw)
In-Reply-To: <1416821928-11453-1-git-send-email-xudong.chen@mediatek.com>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
Change-Id: Iaaba1e8420abfbfb503501310de04ee25ae72e18
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..08f86c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,40 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+	i2c0: i2c@1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <100000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+
-- 
1.8.1.1.dirty

WARNING: multiple messages have this Message-ID (diff)
From: xudong.chen@mediatek.com (Xudong Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date: Mon, 24 Nov 2014 17:38:47 +0800	[thread overview]
Message-ID: <1416821928-11453-2-git-send-email-xudong.chen@mediatek.com> (raw)
In-Reply-To: <1416821928-11453-1-git-send-email-xudong.chen@mediatek.com>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
Change-Id: Iaaba1e8420abfbfb503501310de04ee25ae72e18
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..08f86c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,40 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+	i2c0: i2c at 1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <100000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+
-- 
1.8.1.1.dirty

  reply	other threads:[~2014-11-24  9:39 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-24  9:38 [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller Xudong Chen
2014-11-24  9:38 ` Xudong Chen
2014-11-24  9:38 ` Xudong Chen
2014-11-24  9:38 ` Xudong Chen [this message]
2014-11-24  9:38   ` [PATCH v3 1/2] dt-bindings: Add I2C bindings for mt65xx/mt81xx Xudong Chen
2014-11-24  9:38   ` Xudong Chen
2014-11-24  9:38 ` [PATCH v3 2/2] I2C: mediatek: Add driver for MediaTek I2C controller Xudong Chen
2014-11-24  9:38   ` Xudong Chen
2014-11-24  9:38   ` Xudong Chen
2014-11-24 12:15 ` [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek " Wolfram Sang
2014-11-24 12:15   ` Wolfram Sang
2014-11-24 12:15   ` Wolfram Sang
2014-11-27 14:00   ` Yingjoe Chen
2014-11-27 14:00     ` Yingjoe Chen
2014-11-27 14:00     ` Yingjoe Chen
2014-11-27 16:45     ` Wolfram Sang
2014-11-27 16:45       ` Wolfram Sang
2014-11-27 16:45       ` Wolfram Sang
2014-12-12  2:40       ` Yingjoe Chen
2014-12-12  2:40         ` Yingjoe Chen
2014-12-12  2:40         ` Yingjoe Chen
2015-01-06 13:37         ` Wolfram Sang
2015-01-06 13:37           ` Wolfram Sang
2015-01-06 13:37           ` Wolfram Sang
2015-01-13  9:57           ` Wolfram Sang
2015-01-13  9:57             ` Wolfram Sang
2015-01-13  9:57             ` Wolfram Sang
2015-01-13 15:15             ` Yingjoe Chen
2015-01-13 15:15               ` Yingjoe Chen
2015-01-13 15:15               ` Yingjoe Chen
2015-01-13 15:23               ` Wolfram Sang
2015-01-13 15:23                 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416821928-11453-2-git-send-email-xudong.chen@mediatek.com \
    --to=xudong.chen@mediatek.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jdelvare@suse.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=nathan.chung@mediatek.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=wsa@the-dreams.de \
    --cc=yh.chen@mediatek.com \
    --cc=yingjoe.chen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.