* [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
@ 2014-12-15 14:14 ` Yoshihiro Kaneko
0 siblings, 0 replies; 6+ messages in thread
From: Yoshihiro Kaneko @ 2014-12-15 14:14 UTC (permalink / raw)
To: linux-serial; +Cc: Greg Kroah-Hartman, Simon Horman, Magnus Damm, linux-sh
From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
When fifo overrun happened, the interrupt status refers to
SCLSR register in R-Car SCIF and HSCIF.
Thus, overrun handling takes SCLSR register into account.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
tree.
drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1110523..ff549a8 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
/* overrun error */
if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
copied++;
-
- dev_notice(port->dev, "overrun error\n");
}
if (status & SCxSR_FER(port)) {
@@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
if (tty_insert_flip_char(tport, 0, TTY_PARITY))
copied++;
-
- dev_notice(port->dev, "parity error\n");
}
if (copied)
@@ -1002,12 +998,15 @@ static inline unsigned long port_rx_irq_mask(struct uart_port *port)
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled;
+ unsigned short slr_status = 0;
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
ssr_status = serial_port_in(port, SCxSR);
scr_status = serial_port_in(port, SCSCR);
+ if (port->type = PORT_SCIF || port->type = PORT_HSCIF)
+ slr_status = serial_port_in(port, SCLSR);
err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
@@ -1020,8 +1019,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE))
+ (scr_status & SCSCR_RIE)) {
+ if (port->type = PORT_SCIF || port->type = PORT_HSCIF)
+ sci_handle_fifo_overrun(port);
ret = sci_rx_interrupt(irq, ptr);
+ }
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -1031,6 +1033,12 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
+ /* Overrun Interrupt */
+ if (port->type = PORT_SCIF || port->type = PORT_HSCIF) {
+ if ((slr_status & 0x01))
+ sci_handle_fifo_overrun(port);
+ }
+
return ret;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
@ 2014-12-15 14:14 ` Yoshihiro Kaneko
0 siblings, 0 replies; 6+ messages in thread
From: Yoshihiro Kaneko @ 2014-12-15 14:14 UTC (permalink / raw)
To: linux-serial; +Cc: Greg Kroah-Hartman, Simon Horman, Magnus Damm, linux-sh
From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
When fifo overrun happened, the interrupt status refers to
SCLSR register in R-Car SCIF and HSCIF.
Thus, overrun handling takes SCLSR register into account.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
tree.
drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1110523..ff549a8 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
/* overrun error */
if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
copied++;
-
- dev_notice(port->dev, "overrun error\n");
}
if (status & SCxSR_FER(port)) {
@@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
if (tty_insert_flip_char(tport, 0, TTY_PARITY))
copied++;
-
- dev_notice(port->dev, "parity error\n");
}
if (copied)
@@ -1002,12 +998,15 @@ static inline unsigned long port_rx_irq_mask(struct uart_port *port)
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled;
+ unsigned short slr_status = 0;
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
ssr_status = serial_port_in(port, SCxSR);
scr_status = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
+ slr_status = serial_port_in(port, SCLSR);
err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
@@ -1020,8 +1019,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE))
+ (scr_status & SCSCR_RIE)) {
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
+ sci_handle_fifo_overrun(port);
ret = sci_rx_interrupt(irq, ptr);
+ }
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -1031,6 +1033,12 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
+ /* Overrun Interrupt */
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF) {
+ if ((slr_status & 0x01))
+ sci_handle_fifo_overrun(port);
+ }
+
return ret;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
2014-12-15 14:14 ` Yoshihiro Kaneko
@ 2015-01-22 4:51 ` Nobuhiro Iwamatsu
-1 siblings, 0 replies; 6+ messages in thread
From: Nobuhiro Iwamatsu @ 2015-01-22 4:51 UTC (permalink / raw)
To: Yoshihiro Kaneko
Cc: linux-serial, Greg Kroah-Hartman, Simon Horman, Magnus Damm, Linux-sh
Hi,
2014-12-15 23:14 GMT+09:00 Yoshihiro Kaneko <ykaneko0929@gmail.com>:
> From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>
> When fifo overrun happened, the interrupt status refers to
> SCLSR register in R-Car SCIF and HSCIF.
> Thus, overrun handling takes SCLSR register into account.
>
> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> ---
>
> This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
> tree.
>
> drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
> index 1110523..ff549a8 100644
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
> /* overrun error */
> if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
> copied++;
> -
> - dev_notice(port->dev, "overrun error\n");
> }
>
> if (status & SCxSR_FER(port)) {
> @@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
>
> if (tty_insert_flip_char(tport, 0, TTY_PARITY))
> copied++;
> -
> - dev_notice(port->dev, "parity error\n");
> }
I think that these fixis unrelated to support of HSCIF.
Please split patch.
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
@ 2015-01-22 4:51 ` Nobuhiro Iwamatsu
0 siblings, 0 replies; 6+ messages in thread
From: Nobuhiro Iwamatsu @ 2015-01-22 4:51 UTC (permalink / raw)
To: Yoshihiro Kaneko
Cc: linux-serial, Greg Kroah-Hartman, Simon Horman, Magnus Damm, Linux-sh
Hi,
2014-12-15 23:14 GMT+09:00 Yoshihiro Kaneko <ykaneko0929@gmail.com>:
> From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>
> When fifo overrun happened, the interrupt status refers to
> SCLSR register in R-Car SCIF and HSCIF.
> Thus, overrun handling takes SCLSR register into account.
>
> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> ---
>
> This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
> tree.
>
> drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
> index 1110523..ff549a8 100644
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
> /* overrun error */
> if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
> copied++;
> -
> - dev_notice(port->dev, "overrun error\n");
> }
>
> if (status & SCxSR_FER(port)) {
> @@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
>
> if (tty_insert_flip_char(tport, 0, TTY_PARITY))
> copied++;
> -
> - dev_notice(port->dev, "parity error\n");
> }
I think that these fixis unrelated to support of HSCIF.
Please split patch.
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
2015-01-22 4:51 ` Nobuhiro Iwamatsu
@ 2015-01-25 11:10 ` Yoshihiro Kaneko
-1 siblings, 0 replies; 6+ messages in thread
From: Yoshihiro Kaneko @ 2015-01-25 11:10 UTC (permalink / raw)
To: Nobuhiro Iwamatsu
Cc: linux-serial, Greg Kroah-Hartman, Simon Horman, Magnus Damm, Linux-sh
Hi,
Thanks for your review.
2015-01-22 13:51 GMT+09:00 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:
> Hi,
>
> 2014-12-15 23:14 GMT+09:00 Yoshihiro Kaneko <ykaneko0929@gmail.com>:
>> From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>>
>> When fifo overrun happened, the interrupt status refers to
>> SCLSR register in R-Car SCIF and HSCIF.
>> Thus, overrun handling takes SCLSR register into account.
>>
>> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
>> ---
>>
>> This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
>> tree.
>>
>> drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
>> 1 file changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
>> index 1110523..ff549a8 100644
>> --- a/drivers/tty/serial/sh-sci.c
>> +++ b/drivers/tty/serial/sh-sci.c
>> @@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
>> /* overrun error */
>> if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
>> copied++;
>> -
>> - dev_notice(port->dev, "overrun error\n");
>> }
>>
>> if (status & SCxSR_FER(port)) {
>> @@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
>>
>> if (tty_insert_flip_char(tport, 0, TTY_PARITY))
>> copied++;
>> -
>> - dev_notice(port->dev, "parity error\n");
>> }
>
> I think that these fixis unrelated to support of HSCIF.
> Please split patch.
I got it.
I'll update this patch.
Thanks,
Kaneko
>
> Best regards,
> Nobuhiro
>
>
> --
> Nobuhiro Iwamatsu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling
@ 2015-01-25 11:10 ` Yoshihiro Kaneko
0 siblings, 0 replies; 6+ messages in thread
From: Yoshihiro Kaneko @ 2015-01-25 11:10 UTC (permalink / raw)
To: Nobuhiro Iwamatsu
Cc: linux-serial, Greg Kroah-Hartman, Simon Horman, Magnus Damm, Linux-sh
Hi,
Thanks for your review.
2015-01-22 13:51 GMT+09:00 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:
> Hi,
>
> 2014-12-15 23:14 GMT+09:00 Yoshihiro Kaneko <ykaneko0929@gmail.com>:
>> From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>>
>> When fifo overrun happened, the interrupt status refers to
>> SCLSR register in R-Car SCIF and HSCIF.
>> Thus, overrun handling takes SCLSR register into account.
>>
>> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
>> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
>> ---
>>
>> This patch is based on the tty-next branch of Greg Kroah-Hartman's tty
>> tree.
>>
>> drivers/tty/serial/sh-sci.c | 18 +++++++++++++-----
>> 1 file changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
>> index 1110523..ff549a8 100644
>> --- a/drivers/tty/serial/sh-sci.c
>> +++ b/drivers/tty/serial/sh-sci.c
>> @@ -793,8 +793,6 @@ static int sci_handle_errors(struct uart_port *port)
>> /* overrun error */
>> if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
>> copied++;
>> -
>> - dev_notice(port->dev, "overrun error\n");
>> }
>>
>> if (status & SCxSR_FER(port)) {
>> @@ -835,8 +833,6 @@ static int sci_handle_errors(struct uart_port *port)
>>
>> if (tty_insert_flip_char(tport, 0, TTY_PARITY))
>> copied++;
>> -
>> - dev_notice(port->dev, "parity error\n");
>> }
>
> I think that these fixis unrelated to support of HSCIF.
> Please split patch.
I got it.
I'll update this patch.
Thanks,
Kaneko
>
> Best regards,
> Nobuhiro
>
>
> --
> Nobuhiro Iwamatsu
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-01-25 11:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-15 14:14 [PATCH/RFC] serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling Yoshihiro Kaneko
2014-12-15 14:14 ` Yoshihiro Kaneko
2015-01-22 4:51 ` Nobuhiro Iwamatsu
2015-01-22 4:51 ` Nobuhiro Iwamatsu
2015-01-25 11:10 ` Yoshihiro Kaneko
2015-01-25 11:10 ` Yoshihiro Kaneko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.