* [PATCH v2 0/8] ath10k: add per station debugfs support
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
The following patches add support for sending addba/addba response/delba
for every station entries. These commands are purely for testing purpose.
Before using any of the above aggregation commands, the mode should be moved
to manual. To disable automatic aggretation in target
echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
Then for sending addba request,
echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba
To send addba response,
echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba_resp
And for delba,
echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/delba
v2: Rebased on top of 10.2.4 WMI ops support
Rajkumar Manoharan (8):
ath10k: add wmi support for addba_clear_resp
ath10k: add wmi support for addba_send
ath10k: add wmi support for addba_set_resp
ath10k: add wmi support for delba_send
ath10k: Implement sta_add_debugfs
ath10k: add support to send addba request
ath10k: add support to send addba response
ath10k: add support to send delba
drivers/net/wireless/ath/ath10k/Makefile | 1 +
drivers/net/wireless/ath/ath10k/core.h | 5 +
drivers/net/wireless/ath/ath10k/debug.h | 11 +-
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 256 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/mac.c | 3 +
drivers/net/wireless/ath/ath10k/wmi-ops.h | 78 ++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +
drivers/net/wireless/ath/ath10k/wmi.c | 119 ++++++++++++
8 files changed, 476 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/ath/ath10k/debugfs_sta.c
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread* [PATCH v2 1/8] ath10k: add wmi support for addba_clear_resp
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for clearing addba response before switching aggregation
mode (auto/manual) for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 28 ++++++++++++++++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 20e2c30..b161043 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -119,6 +119,8 @@ struct wmi_ops {
u32 next_offset,
u32 enabled);
struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
+ struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -857,4 +859,20 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
ar->wmi.cmd->pdev_get_temperature_cmdid);
}
+static inline int
+ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_clear_resp)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_clear_resp(ar, vdev_id, mac);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_clear_resp_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4c050ce..499a779 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2207,6 +2207,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
/* .gen_pdev_set_quiet_mode not implemented */
/* .gen_pdev_get_temperature not implemented */
+ /* .gen_addba_clear_resp not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ac74290..4bd38a6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4877,6 +4877,30 @@ ath10k_wmi_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac)
+{
+ struct wmi_addba_clear_resp_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_clear_resp_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n",
+ vdev_id, mac);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4928,6 +4952,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
/* .gen_pdev_get_temperature not implemented */
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -4982,6 +5007,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5037,6 +5063,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5092,6 +5119,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 1/8] ath10k: add wmi support for addba_clear_resp
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for clearing addba response before switching aggregation
mode (auto/manual) for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 28 ++++++++++++++++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 20e2c30..b161043 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -119,6 +119,8 @@ struct wmi_ops {
u32 next_offset,
u32 enabled);
struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
+ struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -857,4 +859,20 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
ar->wmi.cmd->pdev_get_temperature_cmdid);
}
+static inline int
+ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_clear_resp)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_clear_resp(ar, vdev_id, mac);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_clear_resp_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4c050ce..499a779 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2207,6 +2207,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
/* .gen_pdev_set_quiet_mode not implemented */
/* .gen_pdev_get_temperature not implemented */
+ /* .gen_addba_clear_resp not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ac74290..4bd38a6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4877,6 +4877,30 @@ ath10k_wmi_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac)
+{
+ struct wmi_addba_clear_resp_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_clear_resp_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n",
+ vdev_id, mac);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4928,6 +4952,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
/* .gen_pdev_get_temperature not implemented */
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -4982,6 +5007,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5037,6 +5063,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5092,6 +5119,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v2 2/8] ath10k: add wmi support for addba_send
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending addba request. This command is meant
for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 50 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index b161043..badf422 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -121,6 +121,8 @@ struct wmi_ops {
struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
const u8 *mac);
+ struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid, u32 buf_size);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -875,4 +877,21 @@ ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
ar->wmi.cmd->addba_clear_resp_cmdid);
}
+static inline int
+ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_send)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_send(ar, vdev_id, mac, tid, buf_size);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_send_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 499a779..74a0598 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2208,6 +2208,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_pdev_set_quiet_mode not implemented */
/* .gen_pdev_get_temperature not implemented */
/* .gen_addba_clear_resp not implemented */
+ /* .gen_addba_send not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4bd38a6..8103cbc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4901,6 +4901,32 @@ ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct wmi_addba_send_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_send_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->buffersize = __cpu_to_le32(buf_size);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba send vdev_id 0x%X mac_addr %pM tid %u bufsize %u\n",
+ vdev_id, mac, tid, buf_size);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4953,6 +4979,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
/* .gen_pdev_get_temperature not implemented */
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5008,6 +5035,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5064,6 +5092,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5120,6 +5149,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 2/8] ath10k: add wmi support for addba_send
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending addba request. This command is meant
for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 50 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index b161043..badf422 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -121,6 +121,8 @@ struct wmi_ops {
struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
const u8 *mac);
+ struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid, u32 buf_size);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -875,4 +877,21 @@ ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
ar->wmi.cmd->addba_clear_resp_cmdid);
}
+static inline int
+ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_send)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_send(ar, vdev_id, mac, tid, buf_size);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_send_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 499a779..74a0598 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2208,6 +2208,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_pdev_set_quiet_mode not implemented */
/* .gen_pdev_get_temperature not implemented */
/* .gen_addba_clear_resp not implemented */
+ /* .gen_addba_send not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4bd38a6..8103cbc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4901,6 +4901,32 @@ ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct wmi_addba_send_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_send_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->buffersize = __cpu_to_le32(buf_size);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba send vdev_id 0x%X mac_addr %pM tid %u bufsize %u\n",
+ vdev_id, mac, tid, buf_size);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4953,6 +4979,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
/* .gen_pdev_get_temperature not implemented */
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5008,6 +5035,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5064,6 +5092,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5120,6 +5149,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v2 3/8] ath10k: add wmi support for addba_set_resp
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending addba response manually. This command
is used for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index badf422..e8f49de 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -123,6 +123,9 @@ struct wmi_ops {
const u8 *mac);
struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
const u8 *mac, u32 tid, u32 buf_size);
+ struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid,
+ u32 status);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -894,4 +897,21 @@ ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
ar->wmi.cmd->addba_send_cmdid);
}
+static inline int
+ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 status)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_set_resp)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_set_resp(ar, vdev_id, mac, tid, status);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_set_resp_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 74a0598..63f9860 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2209,6 +2209,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_pdev_get_temperature not implemented */
/* .gen_addba_clear_resp not implemented */
/* .gen_addba_send not implemented */
+ /* .gen_addba_set_resp not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 8103cbc..dd17c00 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4927,6 +4927,32 @@ ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 status)
+{
+ struct wmi_addba_setresponse_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_setresponse_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->statuscode = __cpu_to_le32(status);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba set resp vdev_id 0x%X mac_addr %pM tid %u status %u\n",
+ vdev_id, mac, tid, status);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4980,6 +5006,7 @@ static const struct wmi_ops wmi_ops = {
/* .gen_pdev_get_temperature not implemented */
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5036,6 +5063,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5093,6 +5121,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5150,6 +5179,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 3/8] ath10k: add wmi support for addba_set_resp
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending addba response manually. This command
is used for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index badf422..e8f49de 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -123,6 +123,9 @@ struct wmi_ops {
const u8 *mac);
struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
const u8 *mac, u32 tid, u32 buf_size);
+ struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid,
+ u32 status);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -894,4 +897,21 @@ ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
ar->wmi.cmd->addba_send_cmdid);
}
+static inline int
+ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 status)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_set_resp)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_set_resp(ar, vdev_id, mac, tid, status);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_set_resp_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 74a0598..63f9860 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2209,6 +2209,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_pdev_get_temperature not implemented */
/* .gen_addba_clear_resp not implemented */
/* .gen_addba_send not implemented */
+ /* .gen_addba_set_resp not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 8103cbc..dd17c00 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4927,6 +4927,32 @@ ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 status)
+{
+ struct wmi_addba_setresponse_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_setresponse_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->statuscode = __cpu_to_le32(status);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba set resp vdev_id 0x%X mac_addr %pM tid %u status %u\n",
+ vdev_id, mac, tid, status);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4980,6 +5006,7 @@ static const struct wmi_ops wmi_ops = {
/* .gen_pdev_get_temperature not implemented */
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5036,6 +5063,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5093,6 +5121,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5150,6 +5179,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v2 4/8] ath10k: add wmi support for delba_send
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending delba request. This command is used for
debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 31 +++++++++++++++++++++++++++++++
3 files changed, 53 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index e8f49de..3a3d15e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -126,6 +126,9 @@ struct wmi_ops {
struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
const u8 *mac, u32 tid,
u32 status);
+ struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid, u32 initiator,
+ u32 reason);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -914,4 +917,22 @@ ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
ar->wmi.cmd->addba_set_resp_cmdid);
}
+static inline int
+ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 initiator, u32 reason)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_delba_send)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_delba_send(ar, vdev_id, mac, tid, initiator,
+ reason);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->delba_send_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 63f9860..57d2b50 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2210,6 +2210,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_addba_clear_resp not implemented */
/* .gen_addba_send not implemented */
/* .gen_addba_set_resp not implemented */
+ /* .gen_delba_send not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index dd17c00..26d8139 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4953,6 +4953,33 @@ ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 initiator, u32 reason)
+{
+ struct wmi_delba_send_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_delba_send_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->initiator = __cpu_to_le32(initiator);
+ cmd->reasoncode = __cpu_to_le32(reason);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n",
+ vdev_id, mac, tid, initiator, reason);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -5007,6 +5034,7 @@ static const struct wmi_ops wmi_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5064,6 +5092,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5122,6 +5151,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5180,6 +5210,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 4/8] ath10k: add wmi support for delba_send
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add WMI support for sending delba request. This command is used for
debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 31 +++++++++++++++++++++++++++++++
3 files changed, 53 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index e8f49de..3a3d15e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -126,6 +126,9 @@ struct wmi_ops {
struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
const u8 *mac, u32 tid,
u32 status);
+ struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid, u32 initiator,
+ u32 reason);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -914,4 +917,22 @@ ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
ar->wmi.cmd->addba_set_resp_cmdid);
}
+static inline int
+ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 initiator, u32 reason)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_delba_send)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_delba_send(ar, vdev_id, mac, tid, initiator,
+ reason);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->delba_send_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 63f9860..57d2b50 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2210,6 +2210,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_addba_clear_resp not implemented */
/* .gen_addba_send not implemented */
/* .gen_addba_set_resp not implemented */
+ /* .gen_delba_send not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index dd17c00..26d8139 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4953,6 +4953,33 @@ ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 initiator, u32 reason)
+{
+ struct wmi_delba_send_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_delba_send_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->initiator = __cpu_to_le32(initiator);
+ cmd->reasoncode = __cpu_to_le32(reason);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n",
+ vdev_id, mac, tid, initiator, reason);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -5007,6 +5034,7 @@ static const struct wmi_ops wmi_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5064,6 +5092,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5122,6 +5151,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5180,6 +5210,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
.gen_addba_send = ath10k_wmi_op_gen_addba_send,
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v2 5/8] ath10k: Implement sta_add_debugfs
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add per station debugfs files when a station is added to mac80211's
station list. This helps to group peer specific debugfs entries
altogether. Right now this callback adds support to test aggregation
procedures (addba/addba_resp/delba) manually.
To enable automatic aggregation in target,
echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
For manual mode,
echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/Makefile | 1 +
drivers/net/wireless/ath/ath10k/core.h | 5 ++
drivers/net/wireless/ath/ath10k/debug.h | 11 +++-
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 89 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/mac.c | 3 +
5 files changed, 108 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/ath/ath10k/debugfs_sta.c
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index ffa3b1a..6c0c23e 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -15,6 +15,7 @@ ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
ath10k_core-$(CONFIG_THERMAL) += thermal.o
+ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
ath10k_pci-y += pci.o \
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7b6d9e4..c568612 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -239,6 +239,11 @@ struct ath10k_sta {
u32 smps;
struct work_struct update_wk;
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+ /* protected by conf_mutex */
+ bool aggr_mode;
+#endif
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 1b87a5d..a12b832 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -48,6 +48,12 @@ enum ath10k_pktlog_filter {
ATH10K_PKTLOG_ANY = 0x00000001f,
};
+enum ath10k_dbg_aggr_mode {
+ ATH10K_DBG_AGGR_MODE_AUTO,
+ ATH10K_DBG_AGGR_MODE_MANUAL,
+ ATH10K_DBG_AGGR_MODE_MAX,
+};
+
extern unsigned int ath10k_debug_mask;
__printf(2, 3) void ath10k_info(struct ath10k *ar, const char *fmt, ...);
@@ -77,7 +83,6 @@ int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data);
-
#else
static inline int ath10k_debug_start(struct ath10k *ar)
{
@@ -129,6 +134,10 @@ ath10k_debug_get_new_fw_crash_data(struct ath10k *ar)
#define ath10k_debug_get_et_stats NULL
#endif /* CONFIG_ATH10K_DEBUGFS */
+#ifdef CONFIG_MAC80211_DEBUGFS
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct dentry *dir);
+#endif /* CONFIG_MAC80211_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
__printf(3, 4) void ath10k_dbg(struct ath10k *ar,
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
new file mode 100644
index 0000000..d5fca70
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/utsname.h>
+
+#include "core.h"
+#include "wmi-ops.h"
+#include "debug.h"
+
+static ssize_t ath10k_dbg_sta_read_aggr_mode(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ char buf[32];
+ int len = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ len = scnprintf(buf, sizeof(buf) - len, "aggregation mode: %s\n",
+ (arsta->aggr_mode == ATH10K_DBG_AGGR_MODE_AUTO) ?
+ "auto" : "manual");
+ mutex_unlock(&ar->conf_mutex);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_dbg_sta_write_aggr_mode(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 aggr_mode;
+ int ret;
+
+ if (kstrtouint_from_user(user_buf, count, 0, &aggr_mode))
+ return -EINVAL;
+
+ if (aggr_mode >= ATH10K_DBG_AGGR_MODE_MAX)
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (aggr_mode == arsta->aggr_mode)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_clear_resp(ar, arsta->arvif->vdev_id, sta->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to clear addba session ret: %d\n", ret);
+ goto out;
+ }
+
+ arsta->aggr_mode = aggr_mode;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_aggr_mode = {
+ .read = ath10k_dbg_sta_read_aggr_mode,
+ .write = ath10k_dbg_sta_write_aggr_mode,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct dentry *dir)
+{
+ debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
+ &fops_aggr_mode);
+}
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5085f55..c7febfc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4746,6 +4746,9 @@ static const struct ieee80211_ops ath10k_ops = {
.suspend = ath10k_suspend,
.resume = ath10k_resume,
#endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+ .sta_add_debugfs = ath10k_sta_add_debugfs,
+#endif
};
#define RATETAB_ENT(_rate, _rateid, _flags) { \
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 5/8] ath10k: Implement sta_add_debugfs
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
Add per station debugfs files when a station is added to mac80211's
station list. This helps to group peer specific debugfs entries
altogether. Right now this callback adds support to test aggregation
procedures (addba/addba_resp/delba) manually.
To enable automatic aggregation in target,
echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
For manual mode,
echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/Makefile | 1 +
drivers/net/wireless/ath/ath10k/core.h | 5 ++
drivers/net/wireless/ath/ath10k/debug.h | 11 +++-
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 89 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/mac.c | 3 +
5 files changed, 108 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/ath/ath10k/debugfs_sta.c
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index ffa3b1a..6c0c23e 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -15,6 +15,7 @@ ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
ath10k_core-$(CONFIG_THERMAL) += thermal.o
+ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
ath10k_pci-y += pci.o \
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7b6d9e4..c568612 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -239,6 +239,11 @@ struct ath10k_sta {
u32 smps;
struct work_struct update_wk;
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+ /* protected by conf_mutex */
+ bool aggr_mode;
+#endif
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 1b87a5d..a12b832 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -48,6 +48,12 @@ enum ath10k_pktlog_filter {
ATH10K_PKTLOG_ANY = 0x00000001f,
};
+enum ath10k_dbg_aggr_mode {
+ ATH10K_DBG_AGGR_MODE_AUTO,
+ ATH10K_DBG_AGGR_MODE_MANUAL,
+ ATH10K_DBG_AGGR_MODE_MAX,
+};
+
extern unsigned int ath10k_debug_mask;
__printf(2, 3) void ath10k_info(struct ath10k *ar, const char *fmt, ...);
@@ -77,7 +83,6 @@ int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data);
-
#else
static inline int ath10k_debug_start(struct ath10k *ar)
{
@@ -129,6 +134,10 @@ ath10k_debug_get_new_fw_crash_data(struct ath10k *ar)
#define ath10k_debug_get_et_stats NULL
#endif /* CONFIG_ATH10K_DEBUGFS */
+#ifdef CONFIG_MAC80211_DEBUGFS
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct dentry *dir);
+#endif /* CONFIG_MAC80211_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
__printf(3, 4) void ath10k_dbg(struct ath10k *ar,
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
new file mode 100644
index 0000000..d5fca70
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/utsname.h>
+
+#include "core.h"
+#include "wmi-ops.h"
+#include "debug.h"
+
+static ssize_t ath10k_dbg_sta_read_aggr_mode(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ char buf[32];
+ int len = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ len = scnprintf(buf, sizeof(buf) - len, "aggregation mode: %s\n",
+ (arsta->aggr_mode == ATH10K_DBG_AGGR_MODE_AUTO) ?
+ "auto" : "manual");
+ mutex_unlock(&ar->conf_mutex);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_dbg_sta_write_aggr_mode(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 aggr_mode;
+ int ret;
+
+ if (kstrtouint_from_user(user_buf, count, 0, &aggr_mode))
+ return -EINVAL;
+
+ if (aggr_mode >= ATH10K_DBG_AGGR_MODE_MAX)
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (aggr_mode == arsta->aggr_mode)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_clear_resp(ar, arsta->arvif->vdev_id, sta->addr);
+ if (ret) {
+ ath10k_warn(ar, "failed to clear addba session ret: %d\n", ret);
+ goto out;
+ }
+
+ arsta->aggr_mode = aggr_mode;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_aggr_mode = {
+ .read = ath10k_dbg_sta_read_aggr_mode,
+ .write = ath10k_dbg_sta_write_aggr_mode,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct dentry *dir)
+{
+ debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
+ &fops_aggr_mode);
+}
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5085f55..c7febfc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4746,6 +4746,9 @@ static const struct ieee80211_ops ath10k_ops = {
.suspend = ath10k_suspend,
.resume = ath10k_resume,
#endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+ .sta_add_debugfs = ath10k_sta_add_debugfs,
+#endif
};
#define RATETAB_ENT(_rate, _rateid, _flags) { \
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 5/8] ath10k: Implement sta_add_debugfs
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2015-01-12 11:37 ` Kalle Valo
-1 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:37 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> Add per station debugfs files when a station is added to mac80211's
> station list. This helps to group peer specific debugfs entries
> altogether. Right now this callback adds support to test aggregation
> procedures (addba/addba_resp/delba) manually.
>
> To enable automatic aggregation in target,
> echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> For manual mode,
> echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
> new file mode 100644
> index 0000000..d5fca70
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright (c) 2014 Qualcomm Atheros, Inc.
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */
> +#include <linux/utsname.h>
Why include utsname.h? I don't see it used anywhere.
--
Kalle Valo
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 5/8] ath10k: Implement sta_add_debugfs
@ 2015-01-12 11:37 ` Kalle Valo
0 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:37 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> Add per station debugfs files when a station is added to mac80211's
> station list. This helps to group peer specific debugfs entries
> altogether. Right now this callback adds support to test aggregation
> procedures (addba/addba_resp/delba) manually.
>
> To enable automatic aggregation in target,
> echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> For manual mode,
> echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
> new file mode 100644
> index 0000000..d5fca70
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright (c) 2014 Qualcomm Atheros, Inc.
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */
> +#include <linux/utsname.h>
Why include utsname.h? I don't see it used anywhere.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 6/8] ath10k: add support to send addba request
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send addba request in manual
mode. Need to pass two configuration parameters (tid, buffer size)
as input.
To send addba,
echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index d5fca70..89e5e5a 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -81,9 +81,65 @@ static const struct file_operations fops_aggr_mode = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, buf_size;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u", &tid, &buf_size);
+ if (ret != 2) {
+ ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, buf_size);
+ if (ret) {
+ ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, buf_size);
+ }
+
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_addba = {
+ .write = ath10k_dbg_sta_write_addba,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
&fops_aggr_mode);
+ debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
}
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 6/8] ath10k: add support to send addba request
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send addba request in manual
mode. Need to pass two configuration parameters (tid, buffer size)
as input.
To send addba,
echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index d5fca70..89e5e5a 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -81,9 +81,65 @@ static const struct file_operations fops_aggr_mode = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, buf_size;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u", &tid, &buf_size);
+ if (ret != 2) {
+ ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, buf_size);
+ if (ret) {
+ ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, buf_size);
+ }
+
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_addba = {
+ .write = ath10k_dbg_sta_write_addba,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
&fops_aggr_mode);
+ debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
}
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 6/8] ath10k: add support to send addba request
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2015-01-12 11:42 ` Kalle Valo
-1 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:42 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send addba request in manual
> mode. Need to pass two configuration parameters (tid, buffer size)
> as input.
>
> To send addba,
>
> echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> + ret = sscanf(buf, "%u %u", &tid, &buf_size);
> + if (ret != 2) {
> + ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
> + return -EINVAL;
> + }
> +
> + /* Valid TID values are 0 through 15 */
> + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
> + ath10k_warn(ar, "Invalid TID %u\n", tid);
> + return -EINVAL;
> + }
It's preferred that the driver doesn't print anything based on wrong
user input, so I removed these two warning messages:
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -97,16 +97,12 @@ static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
buf[sizeof(buf) - 1] = '\0';
ret = sscanf(buf, "%u %u", &tid, &buf_size);
- if (ret != 2) {
- ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
+ if (ret != 2)
return -EINVAL;
- }
/* Valid TID values are 0 through 15 */
- if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
- ath10k_warn(ar, "Invalid TID %u\n", tid);
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
return -EINVAL;
- }
mutex_lock(&ar->conf_mutex);
if ((ar->state != ATH10K_STATE_ON) ||
--
Kalle Valo
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 6/8] ath10k: add support to send addba request
@ 2015-01-12 11:42 ` Kalle Valo
0 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:42 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send addba request in manual
> mode. Need to pass two configuration parameters (tid, buffer size)
> as input.
>
> To send addba,
>
> echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> + ret = sscanf(buf, "%u %u", &tid, &buf_size);
> + if (ret != 2) {
> + ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
> + return -EINVAL;
> + }
> +
> + /* Valid TID values are 0 through 15 */
> + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
> + ath10k_warn(ar, "Invalid TID %u\n", tid);
> + return -EINVAL;
> + }
It's preferred that the driver doesn't print anything based on wrong
user input, so I removed these two warning messages:
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -97,16 +97,12 @@ static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
buf[sizeof(buf) - 1] = '\0';
ret = sscanf(buf, "%u %u", &tid, &buf_size);
- if (ret != 2) {
- ath10k_warn(ar, "ex: echo <tid> <buffer size> >addba\n");
+ if (ret != 2)
return -EINVAL;
- }
/* Valid TID values are 0 through 15 */
- if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
- ath10k_warn(ar, "Invalid TID %u\n", tid);
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
return -EINVAL;
- }
mutex_lock(&ar->conf_mutex);
if ((ar->state != ATH10K_STATE_ON) ||
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 7/8] ath10k: add support to send addba response
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send addba response in
manual mode for debugging purpose. It accepts tid and status code
as input arguments.
To send addba response,
echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba_resp
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 55 +++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 89e5e5a..95eb5a1 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -136,10 +136,65 @@ static const struct file_operations fops_addba = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_addba_resp(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, status;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u", &tid, &status);
+ if (ret != 2) {
+ ath10k_warn(ar, "ex: echo <tid> <status code> >addba_resp\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_set_resp(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, status);
+ if (ret) {
+ ath10k_warn(ar, "failed to send addba response: vdev_id %u peer %pM tid %u status%u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, status);
+ }
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_addba_resp = {
+ .write = ath10k_dbg_sta_write_addba_resp,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
&fops_aggr_mode);
debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
+ debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
}
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 7/8] ath10k: add support to send addba response
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send addba response in
manual mode for debugging purpose. It accepts tid and status code
as input arguments.
To send addba response,
echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba_resp
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 55 +++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 89e5e5a..95eb5a1 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -136,10 +136,65 @@ static const struct file_operations fops_addba = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_addba_resp(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, status;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u", &tid, &status);
+ if (ret != 2) {
+ ath10k_warn(ar, "ex: echo <tid> <status code> >addba_resp\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_addba_set_resp(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, status);
+ if (ret) {
+ ath10k_warn(ar, "failed to send addba response: vdev_id %u peer %pM tid %u status%u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, status);
+ }
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_addba_resp = {
+ .write = ath10k_dbg_sta_write_addba_resp,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
&fops_aggr_mode);
debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
+ debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
}
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 7/8] ath10k: add support to send addba response
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2015-01-12 11:43 ` Kalle Valo
-1 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:43 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send addba response in
> manual mode for debugging purpose. It accepts tid and status code
> as input arguments.
>
> To send addba response,
>
> echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba_resp
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Same here:
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -148,16 +148,12 @@ static ssize_t ath10k_dbg_sta_write_addba_resp(struct file *file,
buf[sizeof(buf) - 1] = '\0';
ret = sscanf(buf, "%u %u", &tid, &status);
- if (ret != 2) {
- ath10k_warn(ar, "ex: echo <tid> <status code> >addba_resp\n");
+ if (ret != 2)
return -EINVAL;
- }
/* Valid TID values are 0 through 15 */
- if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
- ath10k_warn(ar, "Invalid TID %u\n", tid);
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
return -EINVAL;
- }
mutex_lock(&ar->conf_mutex);
if ((ar->state != ATH10K_STATE_ON) ||
--
Kalle Valo
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 7/8] ath10k: add support to send addba response
@ 2015-01-12 11:43 ` Kalle Valo
0 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:43 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send addba response in
> manual mode for debugging purpose. It accepts tid and status code
> as input arguments.
>
> To send addba response,
>
> echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba_resp
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Same here:
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -148,16 +148,12 @@ static ssize_t ath10k_dbg_sta_write_addba_resp(struct file *file,
buf[sizeof(buf) - 1] = '\0';
ret = sscanf(buf, "%u %u", &tid, &status);
- if (ret != 2) {
- ath10k_warn(ar, "ex: echo <tid> <status code> >addba_resp\n");
+ if (ret != 2)
return -EINVAL;
- }
/* Valid TID values are 0 through 15 */
- if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
- ath10k_warn(ar, "Invalid TID %u\n", tid);
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
return -EINVAL;
- }
mutex_lock(&ar->conf_mutex);
if ((ar->state != ATH10K_STATE_ON) ||
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 8/8] ath10k: add support to send delba
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2014-12-24 7:59 ` Rajkumar Manoharan
-1 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send delba in manual mode
for debugging purpose. It accepts tid, initiator and reason code
as inputs.
To send delba,
echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/delba
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 95eb5a1..5effd7bb 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -190,6 +190,61 @@ static const struct file_operations fops_addba_resp = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_delba(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, initiator, reason;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
+ if (ret != 3) {
+ ath10k_warn(ar, "ex: echo <tid> <initiator> <reason code> >delba\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_delba_send(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, initiator, reason);
+ if (ret) {
+ ath10k_warn(ar, "failed to send delba: vdev_id %u peer %pM tid %u initiator %u reason %u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, initiator,
+ reason);
+ }
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_delba = {
+ .write = ath10k_dbg_sta_write_delba,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
@@ -197,4 +252,5 @@ void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
&fops_aggr_mode);
debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
+ debugfs_create_file("delba", S_IWUSR, dir, sta, &fops_delba);
}
--
2.2.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 8/8] ath10k: add support to send delba
@ 2014-12-24 7:59 ` Rajkumar Manoharan
0 siblings, 0 replies; 28+ messages in thread
From: Rajkumar Manoharan @ 2014-12-24 7:59 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This per-station debugfs entry helps to send delba in manual mode
for debugging purpose. It accepts tid, initiator and reason code
as inputs.
To send delba,
echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/delba
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 56 +++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 95eb5a1..5effd7bb 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -190,6 +190,61 @@ static const struct file_operations fops_addba_resp = {
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_write_delba(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ u32 tid, initiator, reason;
+ int ret;
+ char buf[64];
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = '\0';
+
+ ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
+ if (ret != 3) {
+ ath10k_warn(ar, "ex: echo <tid> <initiator> <reason code> >delba\n");
+ return -EINVAL;
+ }
+
+ /* Valid TID values are 0 through 15 */
+ if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
+ ath10k_warn(ar, "Invalid TID %u\n", tid);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ar->conf_mutex);
+ if ((ar->state != ATH10K_STATE_ON) ||
+ (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+ ret = count;
+ goto out;
+ }
+
+ ret = ath10k_wmi_delba_send(ar, arsta->arvif->vdev_id, sta->addr,
+ tid, initiator, reason);
+ if (ret) {
+ ath10k_warn(ar, "failed to send delba: vdev_id %u peer %pM tid %u initiator %u reason %u\n",
+ arsta->arvif->vdev_id, sta->addr, tid, initiator,
+ reason);
+ }
+ ret = count;
+out:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static const struct file_operations fops_delba = {
+ .write = ath10k_dbg_sta_write_delba,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
@@ -197,4 +252,5 @@ void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
&fops_aggr_mode);
debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
+ debugfs_create_file("delba", S_IWUSR, dir, sta, &fops_delba);
}
--
2.2.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 8/8] ath10k: add support to send delba
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2015-01-12 11:45 ` Kalle Valo
-1 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:45 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send delba in manual mode
> for debugging purpose. It accepts tid, initiator and reason code
> as inputs.
>
> To send delba,
>
> echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/delba
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> + ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
> + if (ret != 3) {
> + ath10k_warn(ar, "ex: echo <tid> <initiator> <reason code> >delba\n");
> + return -EINVAL;
> + }
> +
> + /* Valid TID values are 0 through 15 */
> + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
> + ath10k_warn(ar, "Invalid TID %u\n", tid);
> + return -EINVAL;
> + }
And I did the same here as well.
--
Kalle Valo
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 8/8] ath10k: add support to send delba
@ 2015-01-12 11:45 ` Kalle Valo
0 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-12 11:45 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This per-station debugfs entry helps to send delba in manual mode
> for debugging purpose. It accepts tid, initiator and reason code
> as inputs.
>
> To send delba,
>
> echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/delba
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> + ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
> + if (ret != 3) {
> + ath10k_warn(ar, "ex: echo <tid> <initiator> <reason code> >delba\n");
> + return -EINVAL;
> + }
> +
> + /* Valid TID values are 0 through 15 */
> + if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2) {
> + ath10k_warn(ar, "Invalid TID %u\n", tid);
> + return -EINVAL;
> + }
And I did the same here as well.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 0/8] ath10k: add per station debugfs support
2014-12-24 7:59 ` Rajkumar Manoharan
@ 2015-01-13 14:15 ` Kalle Valo
-1 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-13 14:15 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> The following patches add support for sending addba/addba response/delba
> for every station entries. These commands are purely for testing purpose.
>
> Before using any of the above aggregation commands, the mode should be moved
> to manual. To disable automatic aggretation in target
>
> echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> Then for sending addba request,
>
> echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba
>
> To send addba response,
>
> echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba_resp
>
> And for delba,
>
> echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/delba
>
> v2: Rebased on top of 10.2.4 WMI ops support
>
> Rajkumar Manoharan (8):
> ath10k: add wmi support for addba_clear_resp
> ath10k: add wmi support for addba_send
> ath10k: add wmi support for addba_set_resp
> ath10k: add wmi support for delba_send
> ath10k: Implement sta_add_debugfs
> ath10k: add support to send addba request
> ath10k: add support to send addba response
> ath10k: add support to send delba
Thanks, all eight patches applied to ath.git.
--
Kalle Valo
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 0/8] ath10k: add per station debugfs support
@ 2015-01-13 14:15 ` Kalle Valo
0 siblings, 0 replies; 28+ messages in thread
From: Kalle Valo @ 2015-01-13 14:15 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> The following patches add support for sending addba/addba response/delba
> for every station entries. These commands are purely for testing purpose.
>
> Before using any of the above aggregation commands, the mode should be moved
> to manual. To disable automatic aggretation in target
>
> echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/aggr_mode
>
> Then for sending addba request,
>
> echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba
>
> To send addba response,
>
> echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/addba_resp
>
> And for delba,
>
> echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
> stations/XX:XX:XX:XX:XX:XX/delba
>
> v2: Rebased on top of 10.2.4 WMI ops support
>
> Rajkumar Manoharan (8):
> ath10k: add wmi support for addba_clear_resp
> ath10k: add wmi support for addba_send
> ath10k: add wmi support for addba_set_resp
> ath10k: add wmi support for delba_send
> ath10k: Implement sta_add_debugfs
> ath10k: add support to send addba request
> ath10k: add support to send addba response
> ath10k: add support to send delba
Thanks, all eight patches applied to ath.git.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 28+ messages in thread