From: Jayachandran C <jchandra@broadcom.com>
To: <linux-mips@linux-mips.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>, <ralf@linux-mips.org>,
Jayachandran C <jchandra@broadcom.com>
Subject: [PATCH 03/17] MIPS: Netlogic: Fix cop0 prid check in AHCI init
Date: Wed, 7 Jan 2015 16:58:24 +0530 [thread overview]
Message-ID: <1420630118-17198-4-git-send-email-jchandra@broadcom.com> (raw)
In-Reply-To: <1420630118-17198-1-git-send-email-jchandra@broadcom.com>
From: Ganesan Ramalingam <ganesanr@broadcom.com>
PRID register should be masked with IMP_MASK to get processor ID.
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
---
arch/mips/netlogic/xlp/ahci-init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
index a9d0fae..92be1a3 100644
--- a/arch/mips/netlogic/xlp/ahci-init.c
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -151,7 +151,7 @@ static void nlm_sata_firmware_init(int node)
static int __init nlm_ahci_init(void)
{
int node = 0;
- int chip = read_c0_prid() & PRID_REV_MASK;
+ int chip = read_c0_prid() & PRID_IMP_MASK;
if (chip == PRID_IMP_NETLOGIC_XLP3XX)
nlm_sata_firmware_init(node);
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Jayachandran C <jchandra@broadcom.com>
To: linux-mips@linux-mips.org
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>,
ralf@linux-mips.org, Jayachandran C <jchandra@broadcom.com>
Subject: [PATCH 03/17] MIPS: Netlogic: Fix cop0 prid check in AHCI init
Date: Wed, 7 Jan 2015 16:58:24 +0530 [thread overview]
Message-ID: <1420630118-17198-4-git-send-email-jchandra@broadcom.com> (raw)
Message-ID: <20150107112824.i66KOKG2ljfP5JcDf2Jk2vpqqSxDxjX_P6_qAy9n9sw@z> (raw)
In-Reply-To: <1420630118-17198-1-git-send-email-jchandra@broadcom.com>
From: Ganesan Ramalingam <ganesanr@broadcom.com>
PRID register should be masked with IMP_MASK to get processor ID.
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
---
arch/mips/netlogic/xlp/ahci-init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
index a9d0fae..92be1a3 100644
--- a/arch/mips/netlogic/xlp/ahci-init.c
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -151,7 +151,7 @@ static void nlm_sata_firmware_init(int node)
static int __init nlm_ahci_init(void)
{
int node = 0;
- int chip = read_c0_prid() & PRID_REV_MASK;
+ int chip = read_c0_prid() & PRID_IMP_MASK;
if (chip == PRID_IMP_NETLOGIC_XLP3XX)
nlm_sata_firmware_init(node);
--
1.9.1
next prev parent reply other threads:[~2015-01-07 11:22 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 11:28 [PATCH 00/17] Netlogic XLP updates Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 01/17] MIPS: Netlogic: Fix wait for slave CPUs Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 02/17] MIPS: Netlogic: Fix nlm_xlp2_get_pic_frequency to use ref_div Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` Jayachandran C [this message]
2015-01-07 11:28 ` [PATCH 03/17] MIPS: Netlogic: Fix cop0 prid check in AHCI init Jayachandran C
2015-01-07 11:28 ` [PATCH 04/17] MIPS: Netlogic: Disable writing IRT for disabled blocks Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 17:07 ` Sergei Shtylyov
2015-01-09 9:48 ` Jayachandran C.
2015-01-09 9:48 ` Jayachandran C.
2015-01-09 11:35 ` Sergei Shtylyov
2015-01-07 11:28 ` [PATCH 05/17] MIPS: Netlogic: Fix for SATA PHY init Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 06/17] MIPS: Netlogic: Fix frequency calculation register Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 07/17] MIPS: MSI: Update MSI handling for XLP Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 08/17] MIPS: Netlogic: Use MIPS topology.h Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 09/17] MIPS: Netlogic: Move cores per node out of multi-node.h Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 10/17] MIPS: Netlogic: nlm_core_id for xlp9xx Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 11/17] MIPS: Netlogic: Added HugeTLB as default Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 12/17] MIPS: Netlogic: Update function to read DRAM BARs Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 13/17] MIPS: Netlogic: Handle XLP hardware errata Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 17:21 ` Sergei Shtylyov
2015-01-07 19:33 ` David Daney
2015-01-09 9:51 ` Jayachandran C.
2015-01-09 9:51 ` Jayachandran C.
2015-01-09 10:43 ` Jayachandran C
2015-01-09 10:43 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 14/17] MIPS: Netlogic: Do not enable SUE for core Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 15/17] MIPS: Netlogic: Add irq mapping and setup for XHCI port 3 Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 16/17] MIPS: Netlogic: i2c IRQ mappings for XLP9XX Jayachandran C
2015-01-07 11:28 ` Jayachandran C
2015-01-07 11:28 ` [PATCH 17/17] MIPS: Netlogic: Add built-in dts for XLP5xx boards Jayachandran C
2015-01-07 11:28 ` Jayachandran C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420630118-17198-4-git-send-email-jchandra@broadcom.com \
--to=jchandra@broadcom.com \
--cc=ganesanr@broadcom.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.