All of lore.kernel.org
 help / color / mirror / Atom feed
* [RFC 0/8] ath10k: add multi-channel support
@ 2015-01-09 11:14 ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

New wmi-tlv firmware and new hardware will support
multi-channel operation.

This prepares the driver by implementing chanctx,
improves tx queue locking and introduces initial
interface combinations.

I'm posting this as an RFC first because I'd like
to get some early feedback (if possible) while I
upstream other patches this patchset is basing on.


Michal Kazior (8):
  ath10k: defer AP self-peer removal wait
  ath10k: allow empty ssid vdev config
  ath10k: implement chanctx API
  ath10k: implement adaptive qcs command
  ath10k: protect ar->arvifs linking with data_lock
  ath10k: rework tx queue locking
  ath10k: implement tx pause wmi event
  ath10k: add proper wmi-tlv combinations

 drivers/net/wireless/ath/ath10k/core.c    |   1 +
 drivers/net/wireless/ath/ath10k/core.h    |  16 +
 drivers/net/wireless/ath/ath10k/htt_rx.c  |  80 +++-
 drivers/net/wireless/ath/ath10k/htt_tx.c  |   9 +-
 drivers/net/wireless/ath/ath10k/mac.c     | 692 ++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/mac.h     |  57 +++
 drivers/net/wireless/ath/ath10k/txrx.c    |   6 +
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  16 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 118 ++++-
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  46 ++
 drivers/net/wireless/ath/ath10k/wmi.c     |  18 +-
 drivers/net/wireless/ath/ath10k/wmi.h     |   1 +
 12 files changed, 975 insertions(+), 85 deletions(-)

-- 
1.8.5.3


^ permalink raw reply	[flat|nested] 20+ messages in thread
* [RFC 0/8] ath10k: add multi-channel support
@ 2015-01-09 11:14 ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

New wmi-tlv firmware and new hardware will support
multi-channel operation.

This prepares the driver by implementing chanctx,
improves tx queue locking and introduces initial
interface combinations.

I'm posting this as an RFC first because I'd like
to get some early feedback (if possible) while I
upstream other patches this patchset is basing on.


Michal Kazior (8):
  ath10k: defer AP self-peer removal wait
  ath10k: allow empty ssid vdev config
  ath10k: implement chanctx API
  ath10k: implement adaptive qcs command
  ath10k: protect ar->arvifs linking with data_lock
  ath10k: rework tx queue locking
  ath10k: implement tx pause wmi event
  ath10k: add proper wmi-tlv combinations

 drivers/net/wireless/ath/ath10k/core.c    |   1 +
 drivers/net/wireless/ath/ath10k/core.h    |  16 +
 drivers/net/wireless/ath/ath10k/htt_rx.c  |  80 +++-
 drivers/net/wireless/ath/ath10k/htt_tx.c  |   9 +-
 drivers/net/wireless/ath/ath10k/mac.c     | 692 ++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/mac.h     |  57 +++
 drivers/net/wireless/ath/ath10k/txrx.c    |   6 +
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  16 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 118 ++++-
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  46 ++
 drivers/net/wireless/ath/ath10k/wmi.c     |  18 +-
 drivers/net/wireless/ath/ath10k/wmi.h     |   1 +
 12 files changed, 975 insertions(+), 85 deletions(-)

-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 20+ messages in thread
* [RFC 1/8] ath10k: defer AP self-peer removal wait
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

Some firmware revisions don't notify host about
self-bss-peer removal until after associated vdev
is deleted.

This fixes AP teardown slowdowns and prevents
warnings:

 ath10k_pci 0000:00:05.0: failed to remove peer for AP vdev 0: -110
 ath10k_pci 0000:00:05.0: removing stale peer xx:xx:xx:xx:xx:xx from vdev_id 0
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 24
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 8

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b4d4fec..e3ec6b6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3325,9 +3325,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 	list_del(&arvif->list);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
-		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
+		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
+					     vif->addr);
 		if (ret)
-			ath10k_warn(ar, "failed to remove peer for AP vdev %i: %d\n",
+			ath10k_warn(ar, "failed to submit AP self-peer removal on vdev %i: %d\n",
 				    arvif->vdev_id, ret);
 
 		kfree(arvif->u.ap.noa_data);
@@ -3341,6 +3342,21 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 		ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
 			    arvif->vdev_id, ret);
 
+	/* Some firmware revisions don't notify host about self-peer removal
+	 * until after associated vdev is deleted.
+	 */
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
+						   vif->addr);
+		if (ret)
+			ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		spin_lock_bh(&ar->data_lock);
+		ar->num_peers--;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
 	ath10k_peer_cleanup(ar, arvif->vdev_id);
 
 	mutex_unlock(&ar->conf_mutex);
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 1/8] ath10k: defer AP self-peer removal wait
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

Some firmware revisions don't notify host about
self-bss-peer removal until after associated vdev
is deleted.

This fixes AP teardown slowdowns and prevents
warnings:

 ath10k_pci 0000:00:05.0: failed to remove peer for AP vdev 0: -110
 ath10k_pci 0000:00:05.0: removing stale peer xx:xx:xx:xx:xx:xx from vdev_id 0
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 24
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 8

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b4d4fec..e3ec6b6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3325,9 +3325,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 	list_del(&arvif->list);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
-		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
+		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
+					     vif->addr);
 		if (ret)
-			ath10k_warn(ar, "failed to remove peer for AP vdev %i: %d\n",
+			ath10k_warn(ar, "failed to submit AP self-peer removal on vdev %i: %d\n",
 				    arvif->vdev_id, ret);
 
 		kfree(arvif->u.ap.noa_data);
@@ -3341,6 +3342,21 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 		ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
 			    arvif->vdev_id, ret);
 
+	/* Some firmware revisions don't notify host about self-peer removal
+	 * until after associated vdev is deleted.
+	 */
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
+						   vif->addr);
+		if (ret)
+			ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		spin_lock_bh(&ar->data_lock);
+		ar->num_peers--;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
 	ath10k_peer_cleanup(ar, arvif->vdev_id);
 
 	mutex_unlock(&ar->conf_mutex);
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 2/8] ath10k: allow empty ssid vdev config
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

It doesn't make much sense to reject a valid
firmware configuration combination.

Since SSID isn't known early on it might make
sense to allow driver to start vdev without SSID
and restart it later.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 --
 drivers/net/wireless/ath/ath10k/wmi.c     | 2 --
 2 files changed, 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index df3ddb9..ea7fe78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1295,8 +1295,6 @@ ath10k_wmi_tlv_op_gen_vdev_start(struct ath10k *ar,
 	void *ptr;
 	u32 flags = 0;
 
-	if (WARN_ON(arg->ssid && arg->ssid_len == 0))
-		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->hidden_ssid && !arg->ssid))
 		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1570feb..cf90f86 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4092,8 +4092,6 @@ ath10k_wmi_op_gen_vdev_start(struct ath10k *ar,
 	const char *cmdname;
 	u32 flags = 0;
 
-	if (WARN_ON(arg->ssid && arg->ssid_len == 0))
-		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->hidden_ssid && !arg->ssid))
 		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 2/8] ath10k: allow empty ssid vdev config
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

It doesn't make much sense to reject a valid
firmware configuration combination.

Since SSID isn't known early on it might make
sense to allow driver to start vdev without SSID
and restart it later.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 --
 drivers/net/wireless/ath/ath10k/wmi.c     | 2 --
 2 files changed, 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index df3ddb9..ea7fe78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1295,8 +1295,6 @@ ath10k_wmi_tlv_op_gen_vdev_start(struct ath10k *ar,
 	void *ptr;
 	u32 flags = 0;
 
-	if (WARN_ON(arg->ssid && arg->ssid_len == 0))
-		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->hidden_ssid && !arg->ssid))
 		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1570feb..cf90f86 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4092,8 +4092,6 @@ ath10k_wmi_op_gen_vdev_start(struct ath10k *ar,
 	const char *cmdname;
 	u32 flags = 0;
 
-	if (WARN_ON(arg->ssid && arg->ssid_len == 0))
-		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->hidden_ssid && !arg->ssid))
 		return ERR_PTR(-EINVAL);
 	if (WARN_ON(arg->ssid_len > sizeof(cmd->ssid.ssid)))
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 3/8] ath10k: implement chanctx API
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

The chanctx API will allow ath10k to support
multi-channel operation.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.c   |   1 +
 drivers/net/wireless/ath/ath10k/core.h   |   8 +
 drivers/net/wireless/ath/ath10k/htt_rx.c |  80 ++++-
 drivers/net/wireless/ath/ath10k/mac.c    | 551 +++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/txrx.c   |   6 +
 drivers/net/wireless/ath/ath10k/wmi.c    |  13 +-
 6 files changed, 585 insertions(+), 74 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a546575..26fded3 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1076,6 +1076,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 
 	ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
 
+	INIT_LIST_HEAD(&ar->arctxs);
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index aa12c8a..b44b039 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -241,6 +241,11 @@ struct ath10k_sta {
 	struct work_struct update_wk;
 };
 
+struct ath10k_chanctx {
+	struct list_head list;
+	struct ieee80211_chanctx_conf conf;
+};
+
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 struct ath10k_vif {
@@ -258,6 +263,7 @@ struct ath10k_vif {
 	dma_addr_t beacon_paddr;
 
 	struct ath10k *ar;
+	struct ath10k_chanctx *arctx;
 	struct ieee80211_vif *vif;
 
 	bool is_started;
@@ -546,6 +552,7 @@ struct ath10k {
 	struct cfg80211_chan_def chandef;
 
 	unsigned long long free_vdev_map;
+	struct ath10k_vif *monitor_arvif;
 	bool monitor;
 	int monitor_vdev_id;
 	bool monitor_started;
@@ -576,6 +583,7 @@ struct ath10k {
 	/* protects shared structure data */
 	spinlock_t data_lock;
 
+	struct list_head arctxs;
 	struct list_head arvifs;
 	struct list_head peers;
 	wait_queue_head_t peer_mapping_wq;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 9c782a4..f04d1fa 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -651,8 +651,71 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	}
 }
 
+static struct ieee80211_channel *
+ath10k_htt_rx_h_peer_channel(struct ath10k *ar, struct htt_rx_desc *rxd)
+{
+	struct ath10k_peer *peer;
+	struct ath10k_vif *arvif;
+	u16 peer_id;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	if (rxd->attention.flags &
+	    __cpu_to_le32(RX_ATTENTION_FLAGS_PEER_IDX_INVALID))
+		return NULL;
+
+	if (!(rxd->msdu_end.info0 &
+	      __cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU)))
+		return NULL;
+
+	peer_id = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+		     RX_MPDU_START_INFO0_PEER_IDX);
+
+	peer = ath10k_peer_find_by_id(ar, peer_id);
+	if (!peer)
+		return NULL;
+
+	arvif = ath10k_get_arvif(ar, peer->vdev_id);
+	if (WARN_ON_ONCE(!arvif->arctx))
+		return NULL;
+
+	if (WARN_ON_ONCE(!arvif->arctx))
+		return NULL;
+
+	return arvif->arctx->conf.def.chan;
+}
+
+static struct ieee80211_channel *
+ath10k_htt_rx_h_vdev_channel(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_vif *arvif;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		if (arvif->vdev_id == vdev_id && arvif->arctx)
+			return arvif->arctx->conf.def.chan;
+
+	return NULL;
+}
+
+static struct ieee80211_channel *
+ath10k_htt_rx_h_any_channel(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		return arctx->conf.def.chan;
+
+	return NULL;
+}
+
 static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
-				    struct ieee80211_rx_status *status)
+				    struct ieee80211_rx_status *status,
+				    struct htt_rx_desc *rxd,
+				    u32 vdev_id)
 {
 	struct ieee80211_channel *ch;
 
@@ -660,6 +723,12 @@ static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
 	ch = ar->scan_channel;
 	if (!ch)
 		ch = ar->rx_channel;
+	if (!ch)
+		ch = ath10k_htt_rx_h_peer_channel(ar, rxd);
+	if (!ch)
+		ch = ath10k_htt_rx_h_vdev_channel(ar, vdev_id);
+	if (!ch)
+		ch = ath10k_htt_rx_h_any_channel(ar);
 	spin_unlock_bh(&ar->data_lock);
 
 	if (!ch)
@@ -697,7 +766,8 @@ static void ath10k_htt_rx_h_mactime(struct ath10k *ar,
 
 static void ath10k_htt_rx_h_ppdu(struct ath10k *ar,
 				 struct sk_buff_head *amsdu,
-				 struct ieee80211_rx_status *status)
+				 struct ieee80211_rx_status *status,
+				 u32 vdev_id)
 {
 	struct sk_buff *first;
 	struct htt_rx_desc *rxd;
@@ -729,7 +799,7 @@ static void ath10k_htt_rx_h_ppdu(struct ath10k *ar,
 		status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 
 		ath10k_htt_rx_h_signal(ar, status, rxd);
-		ath10k_htt_rx_h_channel(ar, status);
+		ath10k_htt_rx_h_channel(ar, status, rxd, vdev_id);
 		ath10k_htt_rx_h_rates(ar, status, rxd);
 	}
 
@@ -1400,7 +1470,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			break;
 		}
 
-		ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status);
+		ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 		ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0);
 		ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
 		ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
@@ -1447,7 +1517,7 @@ static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt,
 		return;
 	}
 
-	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 	ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
 	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
 	ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e3ec6b6..b175827 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -754,13 +754,32 @@ static int ath10k_monitor_stop(struct ath10k *ar)
 
 static int ath10k_monitor_recalc(struct ath10k *ar)
 {
+	struct ath10k_chanctx *arctx;
 	bool should_start;
+	int num_ctx;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	should_start = ar->monitor ||
-		       ar->filter_flags & FIF_PROMISC_IN_BSS ||
-		       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+	should_start = (ar->monitor ||
+			ar->filter_flags & FIF_PROMISC_IN_BSS ||
+			test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags)) &&
+			!list_empty(&ar->arctxs) &&
+			!ar->monitor_arvif;
+
+	num_ctx = 0;
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		num_ctx++;
+
+	/* FIXME: It remains unclear if CAC on multi-channel will work this
+	 * way. Multi-channel DFS must be revised.
+	 *
+	 * FIXME: Hopefully 2x STA on different channels + monitor interface
+	 * will simply setup something like a promiscuous mode.
+	 */
+	if (WARN_ON(should_start &&
+		    test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) &&
+		    num_ctx > 1))
+		return -EPERM;
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
 		   "mac monitor recalc started? %d should? %d\n",
@@ -832,6 +851,19 @@ static int ath10k_stop_cac(struct ath10k *ar)
 	return 0;
 }
 
+static bool ath10k_mac_has_radar_enabled(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		if (arctx->conf.radar_enabled)
+			return true;
+
+	return false;
+}
+
 static void ath10k_recalc_radar_detection(struct ath10k *ar)
 {
 	int ret;
@@ -840,7 +872,7 @@ static void ath10k_recalc_radar_detection(struct ath10k *ar)
 
 	ath10k_stop_cac(ar);
 
-	if (!ar->radar_enabled)
+	if (!ath10k_mac_has_radar_enabled(ar))
 		return;
 
 	if (ar->num_started_vdevs > 0)
@@ -861,12 +893,17 @@ static void ath10k_recalc_radar_detection(struct ath10k *ar)
 static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, bool restart)
 {
 	struct ath10k *ar = arvif->ar;
-	struct cfg80211_chan_def *chandef = &ar->chandef;
+	struct cfg80211_chan_def *chandef;
 	struct wmi_vdev_start_request_arg arg = {};
 	int ret = 0;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
+	if (WARN_ON(!arvif->arctx))
+		return -EINVAL;
+
+	chandef = &arvif->arctx->conf.def;
+
 	reinit_completion(&ar->vdev_setup_done);
 
 	arg.vdev_id = arvif->vdev_id;
@@ -1104,6 +1141,76 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	return 0;
 }
 
+static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	/* When originally vdev is started during assign_vif_chanctx() some
+	 * information is missing, notably SSID. Firmware revisions with beacon
+	 * offloading require the SSID to be provided during vdev (re)start to
+	 * handle hidden SSID properly.
+	 *
+	 * Vdev restart must be done after vdev has been both started and
+	 * upped. Otherwise some firmware revisions (at least 10.2) fail to
+	 * deliver vdev restart response event causing timeouts during vdev
+	 * syncing in ath10k.
+	 *
+	 * Note: The vdev down/up and template reinstallation could be skipped
+	 * since only wmi-tlv firmware are known to have beacon offload and
+	 * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart
+	 * response delivery. It's probably more robust to keep it as is.
+	 */
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	if (WARN_ON(!arvif->is_started))
+		return -EINVAL;
+
+	if (WARN_ON(!arvif->is_up))
+		return -EINVAL;
+
+	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+	if (ret) {
+		ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	/* Vdev down reset beacon & presp templates. Reinstall them. Otherwise
+	 * firmware will crash upon vdev up.
+	 */
+
+	ret = ath10k_mac_setup_bcn_tmpl(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to update beacon template: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_mac_setup_prb_tmpl(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to update presp template: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_restart(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to restart ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+				 arvif->bssid);
+	if (ret) {
+		ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 				     struct ieee80211_bss_conf *info)
 {
@@ -1113,9 +1220,11 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	lockdep_assert_held(&arvif->ar->conf_mutex);
 
 	if (!info->enable_beacon) {
-		ath10k_vdev_stop(arvif);
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret)
+			ath10k_warn(ar, "failed to down vdev_id %i: %d\n",
+				    arvif->vdev_id, ret);
 
-		arvif->is_started = false;
 		arvif->is_up = false;
 
 		spin_lock_bh(&arvif->ar->data_lock);
@@ -1127,10 +1236,6 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 
 	arvif->tx_seq_no = 0x1000;
 
-	ret = ath10k_vdev_start(arvif);
-	if (ret)
-		return;
-
 	arvif->aid = 0;
 	ether_addr_copy(arvif->bssid, info->bssid);
 
@@ -1139,13 +1244,18 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	if (ret) {
 		ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
 			    arvif->vdev_id, ret);
-		ath10k_vdev_stop(arvif);
 		return;
 	}
 
-	arvif->is_started = true;
 	arvif->is_up = true;
 
+	ret = ath10k_mac_vif_fix_hidden_ssid(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n",
+			    arvif->vdev_id, ret);
+		return;
+	}
+
 	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
@@ -1333,13 +1443,17 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
 				       struct wmi_peer_assoc_complete_arg *arg)
 {
 	struct ieee80211_bss_conf *info = &vif->bss_conf;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	struct cfg80211_bss *bss;
 	const u8 *rsnie = NULL;
 	const u8 *wpaie = NULL;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	bss = cfg80211_get_bss(ar->hw->wiphy, arvif->arctx->conf.def.chan,
 			       info->bssid, NULL, 0, 0, 0);
 	if (bss) {
 		const struct cfg80211_bss_ies *ies;
@@ -1370,10 +1484,12 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
 }
 
 static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+				      struct ieee80211_vif *vif,
 				      struct ieee80211_sta *sta,
 				      struct wmi_peer_assoc_complete_arg *arg)
 {
 	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	const struct ieee80211_supported_band *sband;
 	const struct ieee80211_rate *rates;
 	u32 ratemask;
@@ -1381,8 +1497,11 @@ static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
-	ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	sband = ar->hw->wiphy->bands[arvif->arctx->conf.def.chan->band];
+	ratemask = sta->supp_rates[arvif->arctx->conf.def.chan->band];
 	rates = sband->bitrates;
 
 	rateset->num_rates = 0;
@@ -1631,9 +1750,13 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 					struct ieee80211_sta *sta,
 					struct wmi_peer_assoc_complete_arg *arg)
 {
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	enum wmi_phy_mode phymode = MODE_UNKNOWN;
 
-	switch (ar->hw->conf.chandef.chan->band) {
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	switch (arvif->arctx->conf.def.chan->band) {
 	case IEEE80211_BAND_2GHZ:
 		if (sta->ht_cap.ht_supported) {
 			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
@@ -1690,7 +1813,7 @@ static int ath10k_peer_assoc_prepare(struct ath10k *ar,
 
 	ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_crypto(ar, vif, arg);
-	ath10k_peer_assoc_h_rates(ar, sta, arg);
+	ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_ht(ar, sta, arg);
 	ath10k_peer_assoc_h_vht(ar, sta, arg);
 	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
@@ -2636,6 +2759,7 @@ void ath10k_halt(struct ath10k *ar)
 	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
 	ar->filter_flags = 0;
 	ar->monitor = false;
+	ar->monitor_arvif = NULL;
 
 	if (ar->monitor_started)
 		ath10k_monitor_stop(ar);
@@ -2889,7 +3013,7 @@ static const char *chandef_get_width(enum nl80211_chan_width width)
 	return "?";
 }
 
-static void ath10k_config_chan(struct ath10k *ar)
+static void ath10k_mac_chan_reconfigure(struct ath10k *ar)
 {
 	struct ath10k_vif *arvif;
 	int ret;
@@ -3022,26 +3146,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&ar->conf_mutex);
 
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC,
-			   "mac config channel %dMHz flags 0x%x radar %d\n",
-			   conf->chandef.chan->center_freq,
-			   conf->chandef.chan->flags,
-			   conf->radar_enabled);
-
-		spin_lock_bh(&ar->data_lock);
-		ar->rx_channel = conf->chandef.chan;
-		spin_unlock_bh(&ar->data_lock);
-
-		ar->radar_enabled = conf->radar_enabled;
-		ath10k_recalc_radar_detection(ar);
-
-		if (!cfg80211_chandef_identical(&ar->chandef, &conf->chandef)) {
-			ar->chandef = conf->chandef;
-			ath10k_config_chan(ar);
-		}
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_PS)
 		ath10k_config_ps(ar);
 
@@ -3277,6 +3381,15 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		goto err_peer_delete;
 	}
 
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ar->monitor_arvif = arvif;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret) {
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+			goto err_peer_delete;
+		}
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 	return 0;
 
@@ -3359,6 +3472,13 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	ath10k_peer_cleanup(ar, arvif->vdev_id);
 
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ar->monitor_arvif = NULL;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
@@ -3922,22 +4042,6 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			ath10k_mac_dec_num_stations(arvif);
 			goto exit;
 		}
-
-		if (vif->type == NL80211_IFTYPE_STATION) {
-			WARN_ON(arvif->is_started);
-
-			ret = ath10k_vdev_start(arvif);
-			if (ret) {
-				ath10k_warn(ar, "failed to start vdev %i: %d\n",
-					    arvif->vdev_id, ret);
-				WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
-							   sta->addr));
-				ath10k_mac_dec_num_stations(arvif);
-				goto exit;
-			}
-
-			arvif->is_started = true;
-		}
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
@@ -3946,18 +4050,6 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		ath10k_dbg(ar, ATH10K_DBG_MAC,
 			   "mac vdev %d peer delete %pM (sta gone)\n",
 			   arvif->vdev_id, sta->addr);
-
-		if (vif->type == NL80211_IFTYPE_STATION) {
-			WARN_ON(!arvif->is_started);
-
-			ret = ath10k_vdev_stop(arvif);
-			if (ret)
-				ath10k_warn(ar, "failed to stop vdev %i: %d\n",
-					    arvif->vdev_id, ret);
-
-			arvif->is_started = false;
-		}
-
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
@@ -4730,14 +4822,19 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 {
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	struct ath10k *ar = arvif->ar;
-	enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+	enum ieee80211_band band;
 	u8 fixed_rate = WMI_FIXED_RATE_NONE;
 	u8 fixed_nss = ar->num_rf_chains;
 	u8 force_sgi;
 
+	if (!arvif->arctx)
+		return -EPERM;
+
 	if (ar->cfg_tx_chainmask)
 		fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
 
+	band = arvif->arctx->conf.def.chan->band;
+
 	force_sgi = mask->control[band].gi;
 	if (force_sgi == NL80211_TXRATE_FORCE_LGI)
 		return -EINVAL;
@@ -4874,6 +4971,316 @@ static int ath10k_ampdu_action(struct ieee80211_hw *hw,
 	return -EINVAL;
 }
 
+static void
+ath10k_mac_update_rx_channel(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+	struct cfg80211_chan_def *def = NULL;
+	int num = 0;
+
+	/* Both locks are required because ar->rx_channel is modified. This
+	 * allows readers to hold either lock.
+	 */
+	lockdep_assert_held(&ar->conf_mutex);
+	lockdep_assert_held(&ar->data_lock);
+
+	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
+	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
+	 * ppdu on Rx may reduce performance on low-end systems. It should be
+	 * possible to make tables/hashmaps to speed the lookup up (be vary of
+	 * cpu data cache lines though regarding sizes) but to keep the initial
+	 * implementation simple and less intrusive fallback to the slow lookup
+	 * only for multi-channel cases. Single-channel cases will remain to
+	 * use the old channel derival and thus performance should not be
+	 * affected much.
+	 */
+	list_for_each_entry(arctx, &ar->arctxs, list) {
+		def = &arctx->conf.def;
+		++num;
+	}
+
+	if (num == 1) {
+		ar->rx_channel = def->chan;
+		ar->chandef = *def;
+	} else {
+		ar->rx_channel = NULL;
+	}
+}
+
+static void
+ath10k_mac_chan_ctx_init(struct ath10k *ar,
+			 struct ath10k_chanctx *arctx,
+			 struct ieee80211_chanctx_conf *conf)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+	lockdep_assert_held(&ar->data_lock);
+
+	memset(arctx, 0, sizeof(*arctx));
+
+	INIT_LIST_HEAD(&arctx->list);
+	list_add(&arctx->list, &ar->arctxs);
+
+	arctx->conf = *conf;
+}
+
+static int
+ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
+			  struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx add freq %hu width %d ptr %p\n",
+		   ctx->def.chan->center_freq, ctx->def.width, ctx);
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	ath10k_mac_chan_ctx_init(ar, arctx, ctx);
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+	ath10k_monitor_recalc(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static void
+ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
+			     struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx remove freq %hu width %d ptr %p\n",
+		   ctx->def.chan->center_freq, ctx->def.width, ctx);
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_del(&arctx->list);
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		WARN(arvif->arctx == arctx,
+		     "trying to remove chanctx which is bound to vdev_id %i\n",
+		     arvif->vdev_id);
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+	ath10k_monitor_recalc(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static void
+ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
+			     struct ieee80211_chanctx_conf *ctx,
+			     u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx change freq %hu->%hu width %d->%d ptr %p changed %x\n",
+		   arctx->conf.def.chan->center_freq,
+		   ctx->def.chan->center_freq,
+		   arctx->conf.def.width, ctx->def.width,
+		   ctx, changed);
+
+	/* This shouldn't really happen because channel switching should use
+	 * switch_vif_chanctx().
+	 */
+	if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
+		goto unlock;
+
+	spin_lock_bh(&ar->data_lock);
+	arctx->conf = *ctx;
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+
+	/* FIXME: How to configure Rx chains properly? */
+
+	/* No other actions are actually necessary. Firmware maintains channel
+	 * definitions per vdev internally and there's no host-side channel
+	 * context abstraction to configure, e.g. channel width.
+	 */
+
+unlock:
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int
+ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx assign ptr %p vdev_id %i\n",
+		   ctx, arvif->vdev_id);
+
+	if (WARN_ON(arvif->is_started)) {
+		mutex_unlock(&ar->conf_mutex);
+		return -EBUSY;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	if (WARN_ON(arvif->arctx)) {
+		spin_unlock_bh(&ar->data_lock);
+		mutex_unlock(&ar->conf_mutex);
+		return -EALREADY;
+	}
+	arvif->arctx = arctx;
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = ath10k_vdev_start(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
+			    arvif->vdev_id, vif->addr,
+			    arctx->conf.def.chan->center_freq, ret);
+		goto err;
+	}
+
+	arvif->is_started = true;
+
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr);
+		if (ret) {
+			ath10k_warn(ar, "failed to up monitor vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_stop;
+		}
+
+		arvif->is_up = true;
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+
+err_stop:
+	ath10k_vdev_stop(arvif);
+	arvif->is_started = false;
+
+err:
+	spin_lock_bh(&ar->data_lock);
+	arvif->arctx = NULL;
+	spin_unlock_bh(&ar->data_lock);
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void
+ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx unassign ptr %p vdev_id %i\n",
+		   ctx, arvif->vdev_id);
+
+	spin_lock_bh(&ar->data_lock);
+	WARN_ON(!arvif->arctx);
+	WARN_ON(arvif->arctx != arctx);
+	arvif->arctx = NULL;
+	spin_unlock_bh(&ar->data_lock);
+
+	WARN_ON(!arvif->is_started);
+
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		WARN_ON(!arvif->is_up);
+
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret)
+			ath10k_warn(ar, "failed to down monitor vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		arvif->is_up = false;
+	}
+
+	ret = ath10k_vdev_stop(arvif);
+	if (ret)
+		ath10k_warn(ar, "failed to stop vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+
+	arvif->is_started = false;
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int
+ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
+				 struct ieee80211_vif_chanctx_switch *vifs,
+				 int n_vifs,
+				 enum ieee80211_chanctx_switch_mode mode)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif;
+	struct ath10k_chanctx *arctx_new, *arctx_old;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx switch n_vifs %d mode %d\n",
+		   n_vifs, mode);
+
+	spin_lock_bh(&ar->data_lock);
+	for (i = 0; i < n_vifs; i++) {
+		arvif = ath10k_vif_to_arvif(vifs[i].vif);
+		arctx_new = (void *)vifs[i].new_ctx->drv_priv;
+		arctx_old = (void *)vifs[i].old_ctx->drv_priv;
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d ptr %p->%p\n",
+			   arvif->vdev_id,
+			   vifs[i].old_ctx->def.chan->center_freq,
+			   vifs[i].new_ctx->def.chan->center_freq,
+			   vifs[i].old_ctx->def.width,
+			   vifs[i].new_ctx->def.width,
+			   arctx_old, arctx_new);
+
+		if (mode == CHANCTX_SWMODE_SWAP_CONTEXTS) {
+			list_del(&arctx_old->list);
+			ath10k_mac_chan_ctx_init(ar, arctx_new,
+						 vifs[i].new_ctx);
+		}
+
+		arvif->arctx = arctx_new;
+		arvif->arctx->conf = *vifs[i].new_ctx;
+	}
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	/* FIXME: Reconfigure only affected vifs */
+	ath10k_mac_chan_reconfigure(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -4904,6 +5311,12 @@ static const struct ieee80211_ops ath10k_ops = {
 	.get_et_sset_count		= ath10k_debug_get_et_sset_count,
 	.get_et_stats			= ath10k_debug_get_et_stats,
 	.get_et_strings			= ath10k_debug_get_et_strings,
+	.add_chanctx			= ath10k_mac_op_add_chanctx,
+	.remove_chanctx			= ath10k_mac_op_remove_chanctx,
+	.change_chanctx			= ath10k_mac_op_change_chanctx,
+	.assign_vif_chanctx		= ath10k_mac_op_assign_vif_chanctx,
+	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
+	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
 
 	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
 
@@ -5272,6 +5685,7 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_AP_LINK_PS |
+			IEEE80211_HW_WANT_MONITOR_VIF |
 			IEEE80211_HW_SPECTRUM_MGMT;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
@@ -5289,6 +5703,7 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
 	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
+	ar->hw->chanctx_data_size = sizeof(struct ath10k_chanctx);
 
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 7579de8..fc80ef0 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -65,6 +65,12 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	}
 
 	msdu = htt->pending_tx[tx_done->msdu_id];
+	if (!msdu) {
+		ath10k_warn(ar, "failed to lookup msdu_id %d\n",
+			    tx_done->msdu_id);
+		return;
+	}
+
 	skb_cb = ATH10K_SKB_CB(msdu);
 
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index cf90f86..cff16e4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2331,6 +2331,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 				    u64 tsf)
 {
 	u32 reg0, reg1, tsf32l;
+	struct ieee80211_channel *ch;
 	struct pulse_event pe;
 	u64 tsf64;
 	u8 rssi, width;
@@ -2359,6 +2360,15 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 	if (!ar->dfs_detector)
 		return;
 
+	spin_lock_bh(&ar->data_lock);
+	ch = ar->rx_channel;
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!ch) {
+		ath10k_warn(ar, "failed to derive channel for radar pulse, treating as radar\n");
+		goto radar_detected;
+	}
+
 	/* report event to DFS pattern detector */
 	tsf32l = __le32_to_cpu(phyerr->tsf_timestamp);
 	tsf64 = tsf & (~0xFFFFFFFFULL);
@@ -2374,7 +2384,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 		rssi = 0;
 
 	pe.ts = tsf64;
-	pe.freq = ar->hw->conf.chandef.chan->center_freq;
+	pe.freq = ch->center_freq;
 	pe.width = width;
 	pe.rssi = rssi;
 
@@ -2390,6 +2400,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 		return;
 	}
 
+radar_detected:
 	ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs radar detected\n");
 	ATH10K_DFS_STAT_INC(ar, radar_detected);
 
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 3/8] ath10k: implement chanctx API
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

The chanctx API will allow ath10k to support
multi-channel operation.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.c   |   1 +
 drivers/net/wireless/ath/ath10k/core.h   |   8 +
 drivers/net/wireless/ath/ath10k/htt_rx.c |  80 ++++-
 drivers/net/wireless/ath/ath10k/mac.c    | 551 +++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/txrx.c   |   6 +
 drivers/net/wireless/ath/ath10k/wmi.c    |  13 +-
 6 files changed, 585 insertions(+), 74 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a546575..26fded3 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1076,6 +1076,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 
 	ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
 
+	INIT_LIST_HEAD(&ar->arctxs);
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index aa12c8a..b44b039 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -241,6 +241,11 @@ struct ath10k_sta {
 	struct work_struct update_wk;
 };
 
+struct ath10k_chanctx {
+	struct list_head list;
+	struct ieee80211_chanctx_conf conf;
+};
+
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 struct ath10k_vif {
@@ -258,6 +263,7 @@ struct ath10k_vif {
 	dma_addr_t beacon_paddr;
 
 	struct ath10k *ar;
+	struct ath10k_chanctx *arctx;
 	struct ieee80211_vif *vif;
 
 	bool is_started;
@@ -546,6 +552,7 @@ struct ath10k {
 	struct cfg80211_chan_def chandef;
 
 	unsigned long long free_vdev_map;
+	struct ath10k_vif *monitor_arvif;
 	bool monitor;
 	int monitor_vdev_id;
 	bool monitor_started;
@@ -576,6 +583,7 @@ struct ath10k {
 	/* protects shared structure data */
 	spinlock_t data_lock;
 
+	struct list_head arctxs;
 	struct list_head arvifs;
 	struct list_head peers;
 	wait_queue_head_t peer_mapping_wq;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 9c782a4..f04d1fa 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -651,8 +651,71 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	}
 }
 
+static struct ieee80211_channel *
+ath10k_htt_rx_h_peer_channel(struct ath10k *ar, struct htt_rx_desc *rxd)
+{
+	struct ath10k_peer *peer;
+	struct ath10k_vif *arvif;
+	u16 peer_id;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	if (rxd->attention.flags &
+	    __cpu_to_le32(RX_ATTENTION_FLAGS_PEER_IDX_INVALID))
+		return NULL;
+
+	if (!(rxd->msdu_end.info0 &
+	      __cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU)))
+		return NULL;
+
+	peer_id = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+		     RX_MPDU_START_INFO0_PEER_IDX);
+
+	peer = ath10k_peer_find_by_id(ar, peer_id);
+	if (!peer)
+		return NULL;
+
+	arvif = ath10k_get_arvif(ar, peer->vdev_id);
+	if (WARN_ON_ONCE(!arvif->arctx))
+		return NULL;
+
+	if (WARN_ON_ONCE(!arvif->arctx))
+		return NULL;
+
+	return arvif->arctx->conf.def.chan;
+}
+
+static struct ieee80211_channel *
+ath10k_htt_rx_h_vdev_channel(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_vif *arvif;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		if (arvif->vdev_id == vdev_id && arvif->arctx)
+			return arvif->arctx->conf.def.chan;
+
+	return NULL;
+}
+
+static struct ieee80211_channel *
+ath10k_htt_rx_h_any_channel(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		return arctx->conf.def.chan;
+
+	return NULL;
+}
+
 static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
-				    struct ieee80211_rx_status *status)
+				    struct ieee80211_rx_status *status,
+				    struct htt_rx_desc *rxd,
+				    u32 vdev_id)
 {
 	struct ieee80211_channel *ch;
 
@@ -660,6 +723,12 @@ static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
 	ch = ar->scan_channel;
 	if (!ch)
 		ch = ar->rx_channel;
+	if (!ch)
+		ch = ath10k_htt_rx_h_peer_channel(ar, rxd);
+	if (!ch)
+		ch = ath10k_htt_rx_h_vdev_channel(ar, vdev_id);
+	if (!ch)
+		ch = ath10k_htt_rx_h_any_channel(ar);
 	spin_unlock_bh(&ar->data_lock);
 
 	if (!ch)
@@ -697,7 +766,8 @@ static void ath10k_htt_rx_h_mactime(struct ath10k *ar,
 
 static void ath10k_htt_rx_h_ppdu(struct ath10k *ar,
 				 struct sk_buff_head *amsdu,
-				 struct ieee80211_rx_status *status)
+				 struct ieee80211_rx_status *status,
+				 u32 vdev_id)
 {
 	struct sk_buff *first;
 	struct htt_rx_desc *rxd;
@@ -729,7 +799,7 @@ static void ath10k_htt_rx_h_ppdu(struct ath10k *ar,
 		status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 
 		ath10k_htt_rx_h_signal(ar, status, rxd);
-		ath10k_htt_rx_h_channel(ar, status);
+		ath10k_htt_rx_h_channel(ar, status, rxd, vdev_id);
 		ath10k_htt_rx_h_rates(ar, status, rxd);
 	}
 
@@ -1400,7 +1470,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 			break;
 		}
 
-		ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status);
+		ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 		ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0);
 		ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
 		ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
@@ -1447,7 +1517,7 @@ static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt,
 		return;
 	}
 
-	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 	ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
 	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
 	ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e3ec6b6..b175827 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -754,13 +754,32 @@ static int ath10k_monitor_stop(struct ath10k *ar)
 
 static int ath10k_monitor_recalc(struct ath10k *ar)
 {
+	struct ath10k_chanctx *arctx;
 	bool should_start;
+	int num_ctx;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	should_start = ar->monitor ||
-		       ar->filter_flags & FIF_PROMISC_IN_BSS ||
-		       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+	should_start = (ar->monitor ||
+			ar->filter_flags & FIF_PROMISC_IN_BSS ||
+			test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags)) &&
+			!list_empty(&ar->arctxs) &&
+			!ar->monitor_arvif;
+
+	num_ctx = 0;
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		num_ctx++;
+
+	/* FIXME: It remains unclear if CAC on multi-channel will work this
+	 * way. Multi-channel DFS must be revised.
+	 *
+	 * FIXME: Hopefully 2x STA on different channels + monitor interface
+	 * will simply setup something like a promiscuous mode.
+	 */
+	if (WARN_ON(should_start &&
+		    test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) &&
+		    num_ctx > 1))
+		return -EPERM;
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
 		   "mac monitor recalc started? %d should? %d\n",
@@ -832,6 +851,19 @@ static int ath10k_stop_cac(struct ath10k *ar)
 	return 0;
 }
 
+static bool ath10k_mac_has_radar_enabled(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arctx, &ar->arctxs, list)
+		if (arctx->conf.radar_enabled)
+			return true;
+
+	return false;
+}
+
 static void ath10k_recalc_radar_detection(struct ath10k *ar)
 {
 	int ret;
@@ -840,7 +872,7 @@ static void ath10k_recalc_radar_detection(struct ath10k *ar)
 
 	ath10k_stop_cac(ar);
 
-	if (!ar->radar_enabled)
+	if (!ath10k_mac_has_radar_enabled(ar))
 		return;
 
 	if (ar->num_started_vdevs > 0)
@@ -861,12 +893,17 @@ static void ath10k_recalc_radar_detection(struct ath10k *ar)
 static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, bool restart)
 {
 	struct ath10k *ar = arvif->ar;
-	struct cfg80211_chan_def *chandef = &ar->chandef;
+	struct cfg80211_chan_def *chandef;
 	struct wmi_vdev_start_request_arg arg = {};
 	int ret = 0;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
+	if (WARN_ON(!arvif->arctx))
+		return -EINVAL;
+
+	chandef = &arvif->arctx->conf.def;
+
 	reinit_completion(&ar->vdev_setup_done);
 
 	arg.vdev_id = arvif->vdev_id;
@@ -1104,6 +1141,76 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	return 0;
 }
 
+static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	/* When originally vdev is started during assign_vif_chanctx() some
+	 * information is missing, notably SSID. Firmware revisions with beacon
+	 * offloading require the SSID to be provided during vdev (re)start to
+	 * handle hidden SSID properly.
+	 *
+	 * Vdev restart must be done after vdev has been both started and
+	 * upped. Otherwise some firmware revisions (at least 10.2) fail to
+	 * deliver vdev restart response event causing timeouts during vdev
+	 * syncing in ath10k.
+	 *
+	 * Note: The vdev down/up and template reinstallation could be skipped
+	 * since only wmi-tlv firmware are known to have beacon offload and
+	 * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart
+	 * response delivery. It's probably more robust to keep it as is.
+	 */
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	if (WARN_ON(!arvif->is_started))
+		return -EINVAL;
+
+	if (WARN_ON(!arvif->is_up))
+		return -EINVAL;
+
+	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+	if (ret) {
+		ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	/* Vdev down reset beacon & presp templates. Reinstall them. Otherwise
+	 * firmware will crash upon vdev up.
+	 */
+
+	ret = ath10k_mac_setup_bcn_tmpl(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to update beacon template: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_mac_setup_prb_tmpl(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to update presp template: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_restart(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to restart ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+				 arvif->bssid);
+	if (ret) {
+		ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 				     struct ieee80211_bss_conf *info)
 {
@@ -1113,9 +1220,11 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	lockdep_assert_held(&arvif->ar->conf_mutex);
 
 	if (!info->enable_beacon) {
-		ath10k_vdev_stop(arvif);
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret)
+			ath10k_warn(ar, "failed to down vdev_id %i: %d\n",
+				    arvif->vdev_id, ret);
 
-		arvif->is_started = false;
 		arvif->is_up = false;
 
 		spin_lock_bh(&arvif->ar->data_lock);
@@ -1127,10 +1236,6 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 
 	arvif->tx_seq_no = 0x1000;
 
-	ret = ath10k_vdev_start(arvif);
-	if (ret)
-		return;
-
 	arvif->aid = 0;
 	ether_addr_copy(arvif->bssid, info->bssid);
 
@@ -1139,13 +1244,18 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	if (ret) {
 		ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
 			    arvif->vdev_id, ret);
-		ath10k_vdev_stop(arvif);
 		return;
 	}
 
-	arvif->is_started = true;
 	arvif->is_up = true;
 
+	ret = ath10k_mac_vif_fix_hidden_ssid(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n",
+			    arvif->vdev_id, ret);
+		return;
+	}
+
 	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
@@ -1333,13 +1443,17 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
 				       struct wmi_peer_assoc_complete_arg *arg)
 {
 	struct ieee80211_bss_conf *info = &vif->bss_conf;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	struct cfg80211_bss *bss;
 	const u8 *rsnie = NULL;
 	const u8 *wpaie = NULL;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	bss = cfg80211_get_bss(ar->hw->wiphy, arvif->arctx->conf.def.chan,
 			       info->bssid, NULL, 0, 0, 0);
 	if (bss) {
 		const struct cfg80211_bss_ies *ies;
@@ -1370,10 +1484,12 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
 }
 
 static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+				      struct ieee80211_vif *vif,
 				      struct ieee80211_sta *sta,
 				      struct wmi_peer_assoc_complete_arg *arg)
 {
 	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	const struct ieee80211_supported_band *sband;
 	const struct ieee80211_rate *rates;
 	u32 ratemask;
@@ -1381,8 +1497,11 @@ static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
-	ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	sband = ar->hw->wiphy->bands[arvif->arctx->conf.def.chan->band];
+	ratemask = sta->supp_rates[arvif->arctx->conf.def.chan->band];
 	rates = sband->bitrates;
 
 	rateset->num_rates = 0;
@@ -1631,9 +1750,13 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 					struct ieee80211_sta *sta,
 					struct wmi_peer_assoc_complete_arg *arg)
 {
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	enum wmi_phy_mode phymode = MODE_UNKNOWN;
 
-	switch (ar->hw->conf.chandef.chan->band) {
+	if (WARN_ON(!arvif->arctx))
+		return;
+
+	switch (arvif->arctx->conf.def.chan->band) {
 	case IEEE80211_BAND_2GHZ:
 		if (sta->ht_cap.ht_supported) {
 			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
@@ -1690,7 +1813,7 @@ static int ath10k_peer_assoc_prepare(struct ath10k *ar,
 
 	ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_crypto(ar, vif, arg);
-	ath10k_peer_assoc_h_rates(ar, sta, arg);
+	ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
 	ath10k_peer_assoc_h_ht(ar, sta, arg);
 	ath10k_peer_assoc_h_vht(ar, sta, arg);
 	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
@@ -2636,6 +2759,7 @@ void ath10k_halt(struct ath10k *ar)
 	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
 	ar->filter_flags = 0;
 	ar->monitor = false;
+	ar->monitor_arvif = NULL;
 
 	if (ar->monitor_started)
 		ath10k_monitor_stop(ar);
@@ -2889,7 +3013,7 @@ static const char *chandef_get_width(enum nl80211_chan_width width)
 	return "?";
 }
 
-static void ath10k_config_chan(struct ath10k *ar)
+static void ath10k_mac_chan_reconfigure(struct ath10k *ar)
 {
 	struct ath10k_vif *arvif;
 	int ret;
@@ -3022,26 +3146,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&ar->conf_mutex);
 
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC,
-			   "mac config channel %dMHz flags 0x%x radar %d\n",
-			   conf->chandef.chan->center_freq,
-			   conf->chandef.chan->flags,
-			   conf->radar_enabled);
-
-		spin_lock_bh(&ar->data_lock);
-		ar->rx_channel = conf->chandef.chan;
-		spin_unlock_bh(&ar->data_lock);
-
-		ar->radar_enabled = conf->radar_enabled;
-		ath10k_recalc_radar_detection(ar);
-
-		if (!cfg80211_chandef_identical(&ar->chandef, &conf->chandef)) {
-			ar->chandef = conf->chandef;
-			ath10k_config_chan(ar);
-		}
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_PS)
 		ath10k_config_ps(ar);
 
@@ -3277,6 +3381,15 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		goto err_peer_delete;
 	}
 
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ar->monitor_arvif = arvif;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret) {
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+			goto err_peer_delete;
+		}
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 	return 0;
 
@@ -3359,6 +3472,13 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	ath10k_peer_cleanup(ar, arvif->vdev_id);
 
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ar->monitor_arvif = NULL;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
@@ -3922,22 +4042,6 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			ath10k_mac_dec_num_stations(arvif);
 			goto exit;
 		}
-
-		if (vif->type == NL80211_IFTYPE_STATION) {
-			WARN_ON(arvif->is_started);
-
-			ret = ath10k_vdev_start(arvif);
-			if (ret) {
-				ath10k_warn(ar, "failed to start vdev %i: %d\n",
-					    arvif->vdev_id, ret);
-				WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
-							   sta->addr));
-				ath10k_mac_dec_num_stations(arvif);
-				goto exit;
-			}
-
-			arvif->is_started = true;
-		}
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
@@ -3946,18 +4050,6 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		ath10k_dbg(ar, ATH10K_DBG_MAC,
 			   "mac vdev %d peer delete %pM (sta gone)\n",
 			   arvif->vdev_id, sta->addr);
-
-		if (vif->type == NL80211_IFTYPE_STATION) {
-			WARN_ON(!arvif->is_started);
-
-			ret = ath10k_vdev_stop(arvif);
-			if (ret)
-				ath10k_warn(ar, "failed to stop vdev %i: %d\n",
-					    arvif->vdev_id, ret);
-
-			arvif->is_started = false;
-		}
-
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
@@ -4730,14 +4822,19 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
 {
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	struct ath10k *ar = arvif->ar;
-	enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+	enum ieee80211_band band;
 	u8 fixed_rate = WMI_FIXED_RATE_NONE;
 	u8 fixed_nss = ar->num_rf_chains;
 	u8 force_sgi;
 
+	if (!arvif->arctx)
+		return -EPERM;
+
 	if (ar->cfg_tx_chainmask)
 		fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
 
+	band = arvif->arctx->conf.def.chan->band;
+
 	force_sgi = mask->control[band].gi;
 	if (force_sgi == NL80211_TXRATE_FORCE_LGI)
 		return -EINVAL;
@@ -4874,6 +4971,316 @@ static int ath10k_ampdu_action(struct ieee80211_hw *hw,
 	return -EINVAL;
 }
 
+static void
+ath10k_mac_update_rx_channel(struct ath10k *ar)
+{
+	struct ath10k_chanctx *arctx;
+	struct cfg80211_chan_def *def = NULL;
+	int num = 0;
+
+	/* Both locks are required because ar->rx_channel is modified. This
+	 * allows readers to hold either lock.
+	 */
+	lockdep_assert_held(&ar->conf_mutex);
+	lockdep_assert_held(&ar->data_lock);
+
+	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
+	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
+	 * ppdu on Rx may reduce performance on low-end systems. It should be
+	 * possible to make tables/hashmaps to speed the lookup up (be vary of
+	 * cpu data cache lines though regarding sizes) but to keep the initial
+	 * implementation simple and less intrusive fallback to the slow lookup
+	 * only for multi-channel cases. Single-channel cases will remain to
+	 * use the old channel derival and thus performance should not be
+	 * affected much.
+	 */
+	list_for_each_entry(arctx, &ar->arctxs, list) {
+		def = &arctx->conf.def;
+		++num;
+	}
+
+	if (num == 1) {
+		ar->rx_channel = def->chan;
+		ar->chandef = *def;
+	} else {
+		ar->rx_channel = NULL;
+	}
+}
+
+static void
+ath10k_mac_chan_ctx_init(struct ath10k *ar,
+			 struct ath10k_chanctx *arctx,
+			 struct ieee80211_chanctx_conf *conf)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+	lockdep_assert_held(&ar->data_lock);
+
+	memset(arctx, 0, sizeof(*arctx));
+
+	INIT_LIST_HEAD(&arctx->list);
+	list_add(&arctx->list, &ar->arctxs);
+
+	arctx->conf = *conf;
+}
+
+static int
+ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
+			  struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx add freq %hu width %d ptr %p\n",
+		   ctx->def.chan->center_freq, ctx->def.width, ctx);
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	ath10k_mac_chan_ctx_init(ar, arctx, ctx);
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+	ath10k_monitor_recalc(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static void
+ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
+			     struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx remove freq %hu width %d ptr %p\n",
+		   ctx->def.chan->center_freq, ctx->def.width, ctx);
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_del(&arctx->list);
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		WARN(arvif->arctx == arctx,
+		     "trying to remove chanctx which is bound to vdev_id %i\n",
+		     arvif->vdev_id);
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+	ath10k_monitor_recalc(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static void
+ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
+			     struct ieee80211_chanctx_conf *ctx,
+			     u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx change freq %hu->%hu width %d->%d ptr %p changed %x\n",
+		   arctx->conf.def.chan->center_freq,
+		   ctx->def.chan->center_freq,
+		   arctx->conf.def.width, ctx->def.width,
+		   ctx, changed);
+
+	/* This shouldn't really happen because channel switching should use
+	 * switch_vif_chanctx().
+	 */
+	if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
+		goto unlock;
+
+	spin_lock_bh(&ar->data_lock);
+	arctx->conf = *ctx;
+	spin_unlock_bh(&ar->data_lock);
+
+	ath10k_recalc_radar_detection(ar);
+
+	/* FIXME: How to configure Rx chains properly? */
+
+	/* No other actions are actually necessary. Firmware maintains channel
+	 * definitions per vdev internally and there's no host-side channel
+	 * context abstraction to configure, e.g. channel width.
+	 */
+
+unlock:
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int
+ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx assign ptr %p vdev_id %i\n",
+		   ctx, arvif->vdev_id);
+
+	if (WARN_ON(arvif->is_started)) {
+		mutex_unlock(&ar->conf_mutex);
+		return -EBUSY;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	if (WARN_ON(arvif->arctx)) {
+		spin_unlock_bh(&ar->data_lock);
+		mutex_unlock(&ar->conf_mutex);
+		return -EALREADY;
+	}
+	arvif->arctx = arctx;
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = ath10k_vdev_start(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
+			    arvif->vdev_id, vif->addr,
+			    arctx->conf.def.chan->center_freq, ret);
+		goto err;
+	}
+
+	arvif->is_started = true;
+
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr);
+		if (ret) {
+			ath10k_warn(ar, "failed to up monitor vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_stop;
+		}
+
+		arvif->is_up = true;
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+
+err_stop:
+	ath10k_vdev_stop(arvif);
+	arvif->is_started = false;
+
+err:
+	spin_lock_bh(&ar->data_lock);
+	arvif->arctx = NULL;
+	spin_unlock_bh(&ar->data_lock);
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void
+ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_chanctx_conf *ctx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
+	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx unassign ptr %p vdev_id %i\n",
+		   ctx, arvif->vdev_id);
+
+	spin_lock_bh(&ar->data_lock);
+	WARN_ON(!arvif->arctx);
+	WARN_ON(arvif->arctx != arctx);
+	arvif->arctx = NULL;
+	spin_unlock_bh(&ar->data_lock);
+
+	WARN_ON(!arvif->is_started);
+
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		WARN_ON(!arvif->is_up);
+
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret)
+			ath10k_warn(ar, "failed to down monitor vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		arvif->is_up = false;
+	}
+
+	ret = ath10k_vdev_stop(arvif);
+	if (ret)
+		ath10k_warn(ar, "failed to stop vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+
+	arvif->is_started = false;
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int
+ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
+				 struct ieee80211_vif_chanctx_switch *vifs,
+				 int n_vifs,
+				 enum ieee80211_chanctx_switch_mode mode)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif;
+	struct ath10k_chanctx *arctx_new, *arctx_old;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac chanctx switch n_vifs %d mode %d\n",
+		   n_vifs, mode);
+
+	spin_lock_bh(&ar->data_lock);
+	for (i = 0; i < n_vifs; i++) {
+		arvif = ath10k_vif_to_arvif(vifs[i].vif);
+		arctx_new = (void *)vifs[i].new_ctx->drv_priv;
+		arctx_old = (void *)vifs[i].old_ctx->drv_priv;
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d ptr %p->%p\n",
+			   arvif->vdev_id,
+			   vifs[i].old_ctx->def.chan->center_freq,
+			   vifs[i].new_ctx->def.chan->center_freq,
+			   vifs[i].old_ctx->def.width,
+			   vifs[i].new_ctx->def.width,
+			   arctx_old, arctx_new);
+
+		if (mode == CHANCTX_SWMODE_SWAP_CONTEXTS) {
+			list_del(&arctx_old->list);
+			ath10k_mac_chan_ctx_init(ar, arctx_new,
+						 vifs[i].new_ctx);
+		}
+
+		arvif->arctx = arctx_new;
+		arvif->arctx->conf = *vifs[i].new_ctx;
+	}
+	ath10k_mac_update_rx_channel(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	/* FIXME: Reconfigure only affected vifs */
+	ath10k_mac_chan_reconfigure(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -4904,6 +5311,12 @@ static const struct ieee80211_ops ath10k_ops = {
 	.get_et_sset_count		= ath10k_debug_get_et_sset_count,
 	.get_et_stats			= ath10k_debug_get_et_stats,
 	.get_et_strings			= ath10k_debug_get_et_strings,
+	.add_chanctx			= ath10k_mac_op_add_chanctx,
+	.remove_chanctx			= ath10k_mac_op_remove_chanctx,
+	.change_chanctx			= ath10k_mac_op_change_chanctx,
+	.assign_vif_chanctx		= ath10k_mac_op_assign_vif_chanctx,
+	.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
+	.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
 
 	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
 
@@ -5272,6 +5685,7 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_AP_LINK_PS |
+			IEEE80211_HW_WANT_MONITOR_VIF |
 			IEEE80211_HW_SPECTRUM_MGMT;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
@@ -5289,6 +5703,7 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
 	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
+	ar->hw->chanctx_data_size = sizeof(struct ath10k_chanctx);
 
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 7579de8..fc80ef0 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -65,6 +65,12 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	}
 
 	msdu = htt->pending_tx[tx_done->msdu_id];
+	if (!msdu) {
+		ath10k_warn(ar, "failed to lookup msdu_id %d\n",
+			    tx_done->msdu_id);
+		return;
+	}
+
 	skb_cb = ATH10K_SKB_CB(msdu);
 
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index cf90f86..cff16e4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2331,6 +2331,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 				    u64 tsf)
 {
 	u32 reg0, reg1, tsf32l;
+	struct ieee80211_channel *ch;
 	struct pulse_event pe;
 	u64 tsf64;
 	u8 rssi, width;
@@ -2359,6 +2360,15 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 	if (!ar->dfs_detector)
 		return;
 
+	spin_lock_bh(&ar->data_lock);
+	ch = ar->rx_channel;
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!ch) {
+		ath10k_warn(ar, "failed to derive channel for radar pulse, treating as radar\n");
+		goto radar_detected;
+	}
+
 	/* report event to DFS pattern detector */
 	tsf32l = __le32_to_cpu(phyerr->tsf_timestamp);
 	tsf64 = tsf & (~0xFFFFFFFFULL);
@@ -2374,7 +2384,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 		rssi = 0;
 
 	pe.ts = tsf64;
-	pe.freq = ar->hw->conf.chandef.chan->center_freq;
+	pe.freq = ch->center_freq;
 	pe.width = width;
 	pe.rssi = rssi;
 
@@ -2390,6 +2400,7 @@ static void ath10k_dfs_radar_report(struct ath10k *ar,
 		return;
 	}
 
+radar_detected:
 	ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs radar detected\n");
 	ATH10K_DFS_STAT_INC(ar, radar_detected);
 
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 4/8] ath10k: implement adaptive qcs command
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This command is used in latest firmware revisions
to control multi-channel scheduler.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 30 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  4 ++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi.h     |  1 +
 5 files changed, 54 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 8e815d4..7dc7b1b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -127,6 +127,7 @@ struct wmi_ops {
 					struct sk_buff *bcn);
 	struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id,
 					     const u8 *p2p_ie);
+	struct sk_buff *(*gen_adaptive_qcs)(struct ath10k *ar, bool enable);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -914,4 +915,19 @@ ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie)
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie);
 }
 
+static inline int
+ath10k_wmi_adaptive_qcs(struct ath10k *ar, bool enable)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_adaptive_qcs)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_adaptive_qcs(ar, enable);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->adaptive_qcs_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ea7fe78..ef55110 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2222,6 +2222,34 @@ ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_adaptive_qcs(struct ath10k *ar, bool enable)
+{
+	struct wmi_tlv_adaptive_qcs *cmd;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	void *ptr;
+	size_t len;
+
+	len = sizeof(*tlv) + sizeof(*cmd);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_RESMGR_ADAPTIVE_OCS_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->enable = __cpu_to_le32(enable ? 1 : 0);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv adaptive qcs %d\n", enable);
+	return skb;
+}
+
 /****************/
 /* TLV mappings */
 /****************/
@@ -2345,6 +2373,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
 	.gpio_config_cmdid = WMI_TLV_GPIO_CONFIG_CMDID,
 	.gpio_output_cmdid = WMI_TLV_GPIO_OUTPUT_CMDID,
 	.pdev_get_temperature_cmdid = WMI_TLV_CMD_UNSUPPORTED,
+	.adaptive_qcs_cmdid = WMI_TLV_RESMGR_ADAPTIVE_OCS_CMDID,
 };
 
 static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
@@ -2510,6 +2539,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
 	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
 	.gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie,
+	.gen_adaptive_qcs = ath10k_wmi_tlv_op_gen_adaptive_qcs,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 87db762..c311b3c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1428,6 +1428,10 @@ struct wmi_tlv_diag_data_ev {
 	__le32 num_items;
 } __packed;
 
+struct wmi_tlv_adaptive_qcs {
+	__le32 enable;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index cff16e4..ee68e6b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4944,6 +4944,7 @@ static const struct wmi_ops wmi_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5001,6 +5002,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5114,6 +5116,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index bd7f29a..af5f88cf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -551,6 +551,7 @@ struct wmi_cmd_map {
 	u32 gpio_config_cmdid;
 	u32 gpio_output_cmdid;
 	u32 pdev_get_temperature_cmdid;
+	u32 adaptive_qcs_cmdid;
 };
 
 /*
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 4/8] ath10k: implement adaptive qcs command
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This command is used in latest firmware revisions
to control multi-channel scheduler.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 30 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  4 ++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi.h     |  1 +
 5 files changed, 54 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 8e815d4..7dc7b1b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -127,6 +127,7 @@ struct wmi_ops {
 					struct sk_buff *bcn);
 	struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id,
 					     const u8 *p2p_ie);
+	struct sk_buff *(*gen_adaptive_qcs)(struct ath10k *ar, bool enable);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -914,4 +915,19 @@ ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie)
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie);
 }
 
+static inline int
+ath10k_wmi_adaptive_qcs(struct ath10k *ar, bool enable)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_adaptive_qcs)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_adaptive_qcs(ar, enable);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->adaptive_qcs_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ea7fe78..ef55110 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2222,6 +2222,34 @@ ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_adaptive_qcs(struct ath10k *ar, bool enable)
+{
+	struct wmi_tlv_adaptive_qcs *cmd;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	void *ptr;
+	size_t len;
+
+	len = sizeof(*tlv) + sizeof(*cmd);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_RESMGR_ADAPTIVE_OCS_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->enable = __cpu_to_le32(enable ? 1 : 0);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv adaptive qcs %d\n", enable);
+	return skb;
+}
+
 /****************/
 /* TLV mappings */
 /****************/
@@ -2345,6 +2373,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
 	.gpio_config_cmdid = WMI_TLV_GPIO_CONFIG_CMDID,
 	.gpio_output_cmdid = WMI_TLV_GPIO_OUTPUT_CMDID,
 	.pdev_get_temperature_cmdid = WMI_TLV_CMD_UNSUPPORTED,
+	.adaptive_qcs_cmdid = WMI_TLV_RESMGR_ADAPTIVE_OCS_CMDID,
 };
 
 static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
@@ -2510,6 +2539,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
 	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
 	.gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie,
+	.gen_adaptive_qcs = ath10k_wmi_tlv_op_gen_adaptive_qcs,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 87db762..c311b3c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1428,6 +1428,10 @@ struct wmi_tlv_diag_data_ev {
 	__le32 num_items;
 } __packed;
 
+struct wmi_tlv_adaptive_qcs {
+	__le32 enable;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index cff16e4..ee68e6b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4944,6 +4944,7 @@ static const struct wmi_ops wmi_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5001,6 +5002,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5114,6 +5116,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
+	/* .gen_adaptive_qcs not implemented */
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index bd7f29a..af5f88cf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -551,6 +551,7 @@ struct wmi_cmd_map {
 	u32 gpio_config_cmdid;
 	u32 gpio_output_cmdid;
 	u32 pdev_get_temperature_cmdid;
+	u32 adaptive_qcs_cmdid;
 };
 
 /*
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 5/8] ath10k: protect ar->arvifs linking with data_lock
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This will make it possible to iterate over
interface list while in an atomic context,
i.e. tasklet.

Caller should still be careful with accessing
arvif structures though.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b175827..fed8cc9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3283,7 +3283,10 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+
+	spin_lock_bh(&ar->data_lock);
 	list_add(&arvif->list, &ar->arvifs);
+	spin_unlock_bh(&ar->data_lock);
 
 	vdev_param = ar->wmi.vdev_param->def_keyid;
 	ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
@@ -3400,7 +3403,9 @@ err_peer_delete:
 err_vdev_delete:
 	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 err:
 	if (arvif->beacon_buf) {
@@ -3435,7 +3440,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 5/8] ath10k: protect ar->arvifs linking with data_lock
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This will make it possible to iterate over
interface list while in an atomic context,
i.e. tasklet.

Caller should still be careful with accessing
arvif structures though.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b175827..fed8cc9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3283,7 +3283,10 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+
+	spin_lock_bh(&ar->data_lock);
 	list_add(&arvif->list, &ar->arvifs);
+	spin_unlock_bh(&ar->data_lock);
 
 	vdev_param = ar->wmi.vdev_param->def_keyid;
 	ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
@@ -3400,7 +3403,9 @@ err_peer_delete:
 err_vdev_delete:
 	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 err:
 	if (arvif->beacon_buf) {
@@ -3435,7 +3440,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 6/8] ath10k: rework tx queue locking
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

Tx queue locking was very simple until now. Future
multi-channel support will require a more flexible
and fine grained control.

This introduces a per-hw and per-vif (each with a
bitmask of reasons) tx queue locking.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.h   |  8 +++++
 drivers/net/wireless/ath/ath10k/htt_tx.c |  9 +++--
 drivers/net/wireless/ath/ath10k/mac.c    | 20 ++++++++++-
 drivers/net/wireless/ath/ath10k/mac.h    | 57 ++++++++++++++++++++++++++++++++
 4 files changed, 90 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index b44b039..a9405f1 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -261,6 +261,7 @@ struct ath10k_vif {
 	bool beacon_sent;
 	void *beacon_buf;
 	dma_addr_t beacon_paddr;
+	unsigned long tx_paused; /* arbitrary values defined by target */
 
 	struct ath10k *ar;
 	struct ath10k_chanctx *arctx;
@@ -452,6 +453,11 @@ static inline const char *ath10k_scan_state_str(enum ath10k_scan_state state)
 	return "unknown";
 }
 
+enum ath10k_tx_pause_reason {
+	ATH10K_TX_PAUSE_Q_FULL,
+	ATH10K_TX_PAUSE_MAX,
+};
+
 struct ath10k {
 	struct ath_common ath_common;
 	struct ieee80211_hw *hw;
@@ -617,6 +623,8 @@ struct ath10k {
 
 	struct dfs_pattern_detector *dfs_detector;
 
+	unsigned long tx_paused; /* see ATH10K_TX_PAUSE_ */
+
 #ifdef CONFIG_ATH10K_DEBUGFS
 	struct ath10k_debug debug;
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a1bda41..56457f1 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -25,8 +25,11 @@
 void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
 {
 	htt->num_pending_tx--;
-	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
-		ieee80211_wake_queues(htt->ar->hw);
+	if (htt->num_pending_tx == htt->max_num_pending_tx - 1) {
+		spin_lock_bh(&htt->tx_lock);
+		ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+		spin_unlock_bh(&htt->tx_lock);
+	}
 }
 
 static void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
@@ -49,7 +52,7 @@ static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
 
 	htt->num_pending_tx++;
 	if (htt->num_pending_tx == htt->max_num_pending_tx)
-		ieee80211_stop_queues(htt->ar->hw);
+		ath10k_mac_tx_lock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
 
 exit:
 	spin_unlock_bh(&htt->tx_lock);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index fed8cc9..9b6fab4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2765,6 +2765,7 @@ void ath10k_halt(struct ath10k *ar)
 		ath10k_monitor_stop(ar);
 
 	ar->monitor_started = false;
+	ar->tx_paused = 0;
 
 	ath10k_scan_finish(ar);
 	ath10k_peer_cleanup_all(ar);
@@ -3187,6 +3188,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	int ret = 0;
 	u32 value;
 	int bit;
+	int i;
 	u32 vdev_param;
 
 	mutex_lock(&ar->conf_mutex);
@@ -3240,6 +3242,15 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
+	/* Using vdev_id as queue number will make it very easy to do per-vif
+	 * tx queue locking. This shouldn't wrap due to interface combinations
+	 * but do a modulo for correctness sake and prevent using offchannel tx
+	 * queues for regular vif tx.
+	 */
+	vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
+	for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++)
+		vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
+
 	/* Some firmware revisions don't wait for beacon tx completion before
 	 * sending another SWBA event. This could lead to hardware using old
 	 * (freed) beacon data in some cases, e.g. tx credit starvation
@@ -5694,6 +5705,7 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_AP_LINK_PS |
 			IEEE80211_HW_WANT_MONITOR_VIF |
+			IEEE80211_HW_QUEUE_CONTROL |
 			IEEE80211_HW_SPECTRUM_MGMT;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
@@ -5739,7 +5751,13 @@ int ath10k_mac_register(struct ath10k *ar)
 	 * on LL hardware queues are managed entirely by the FW
 	 * so we only advertise to mac we can do the queues thing
 	 */
-	ar->hw->queues = 4;
+	ar->hw->queues = IEEE80211_MAX_QUEUES;
+
+	/* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is
+	 * something that vdev_ids can't reach so that we don't stop the queue
+	 * accidentally.
+	 */
+	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
 
 	switch (ar->wmi.op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 6829611..76776f6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -69,4 +69,61 @@ static inline void ath10k_tx_h_seq_no(struct ieee80211_vif *vif,
 	}
 }
 
+static inline void ath10k_mac_tx_lock(struct ath10k *ar, int reason)
+{
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
+	ar->tx_paused |= BIT(reason);
+	ieee80211_stop_queues(ar->hw);
+}
+
+static inline void ath10k_mac_tx_unlock(struct ath10k *ar, int reason)
+{
+	struct ath10k_vif *arvif;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+	lockdep_assert_held(&ar->data_lock);
+
+	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
+	ar->tx_paused &= ~BIT(reason);
+
+	if (ar->tx_paused)
+		return;
+
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		if (!arvif->tx_paused)
+			ieee80211_wake_queue(ar->hw, arvif->vdev_id);
+}
+
+static inline void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= BITS_PER_LONG);
+	arvif->tx_paused |= BIT(reason);
+	ieee80211_stop_queue(ar->hw, arvif->vdev_id);
+}
+
+static inline void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif,
+					    int reason)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= BITS_PER_LONG);
+	arvif->tx_paused &= ~BIT(reason);
+
+	if (ar->tx_paused)
+		return;
+
+	if (arvif->tx_paused)
+		return;
+
+	ieee80211_wake_queue(ar->hw, arvif->vdev_id);
+}
+
 #endif /* _MAC_H_ */
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 6/8] ath10k: rework tx queue locking
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

Tx queue locking was very simple until now. Future
multi-channel support will require a more flexible
and fine grained control.

This introduces a per-hw and per-vif (each with a
bitmask of reasons) tx queue locking.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.h   |  8 +++++
 drivers/net/wireless/ath/ath10k/htt_tx.c |  9 +++--
 drivers/net/wireless/ath/ath10k/mac.c    | 20 ++++++++++-
 drivers/net/wireless/ath/ath10k/mac.h    | 57 ++++++++++++++++++++++++++++++++
 4 files changed, 90 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index b44b039..a9405f1 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -261,6 +261,7 @@ struct ath10k_vif {
 	bool beacon_sent;
 	void *beacon_buf;
 	dma_addr_t beacon_paddr;
+	unsigned long tx_paused; /* arbitrary values defined by target */
 
 	struct ath10k *ar;
 	struct ath10k_chanctx *arctx;
@@ -452,6 +453,11 @@ static inline const char *ath10k_scan_state_str(enum ath10k_scan_state state)
 	return "unknown";
 }
 
+enum ath10k_tx_pause_reason {
+	ATH10K_TX_PAUSE_Q_FULL,
+	ATH10K_TX_PAUSE_MAX,
+};
+
 struct ath10k {
 	struct ath_common ath_common;
 	struct ieee80211_hw *hw;
@@ -617,6 +623,8 @@ struct ath10k {
 
 	struct dfs_pattern_detector *dfs_detector;
 
+	unsigned long tx_paused; /* see ATH10K_TX_PAUSE_ */
+
 #ifdef CONFIG_ATH10K_DEBUGFS
 	struct ath10k_debug debug;
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a1bda41..56457f1 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -25,8 +25,11 @@
 void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
 {
 	htt->num_pending_tx--;
-	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
-		ieee80211_wake_queues(htt->ar->hw);
+	if (htt->num_pending_tx == htt->max_num_pending_tx - 1) {
+		spin_lock_bh(&htt->tx_lock);
+		ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+		spin_unlock_bh(&htt->tx_lock);
+	}
 }
 
 static void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
@@ -49,7 +52,7 @@ static int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
 
 	htt->num_pending_tx++;
 	if (htt->num_pending_tx == htt->max_num_pending_tx)
-		ieee80211_stop_queues(htt->ar->hw);
+		ath10k_mac_tx_lock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
 
 exit:
 	spin_unlock_bh(&htt->tx_lock);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index fed8cc9..9b6fab4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2765,6 +2765,7 @@ void ath10k_halt(struct ath10k *ar)
 		ath10k_monitor_stop(ar);
 
 	ar->monitor_started = false;
+	ar->tx_paused = 0;
 
 	ath10k_scan_finish(ar);
 	ath10k_peer_cleanup_all(ar);
@@ -3187,6 +3188,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	int ret = 0;
 	u32 value;
 	int bit;
+	int i;
 	u32 vdev_param;
 
 	mutex_lock(&ar->conf_mutex);
@@ -3240,6 +3242,15 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
+	/* Using vdev_id as queue number will make it very easy to do per-vif
+	 * tx queue locking. This shouldn't wrap due to interface combinations
+	 * but do a modulo for correctness sake and prevent using offchannel tx
+	 * queues for regular vif tx.
+	 */
+	vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
+	for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++)
+		vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1);
+
 	/* Some firmware revisions don't wait for beacon tx completion before
 	 * sending another SWBA event. This could lead to hardware using old
 	 * (freed) beacon data in some cases, e.g. tx credit starvation
@@ -5694,6 +5705,7 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_AP_LINK_PS |
 			IEEE80211_HW_WANT_MONITOR_VIF |
+			IEEE80211_HW_QUEUE_CONTROL |
 			IEEE80211_HW_SPECTRUM_MGMT;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
@@ -5739,7 +5751,13 @@ int ath10k_mac_register(struct ath10k *ar)
 	 * on LL hardware queues are managed entirely by the FW
 	 * so we only advertise to mac we can do the queues thing
 	 */
-	ar->hw->queues = 4;
+	ar->hw->queues = IEEE80211_MAX_QUEUES;
+
+	/* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is
+	 * something that vdev_ids can't reach so that we don't stop the queue
+	 * accidentally.
+	 */
+	ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1;
 
 	switch (ar->wmi.op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 6829611..76776f6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -69,4 +69,61 @@ static inline void ath10k_tx_h_seq_no(struct ieee80211_vif *vif,
 	}
 }
 
+static inline void ath10k_mac_tx_lock(struct ath10k *ar, int reason)
+{
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
+	ar->tx_paused |= BIT(reason);
+	ieee80211_stop_queues(ar->hw);
+}
+
+static inline void ath10k_mac_tx_unlock(struct ath10k *ar, int reason)
+{
+	struct ath10k_vif *arvif;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+	lockdep_assert_held(&ar->data_lock);
+
+	WARN_ON(reason >= ATH10K_TX_PAUSE_MAX);
+	ar->tx_paused &= ~BIT(reason);
+
+	if (ar->tx_paused)
+		return;
+
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		if (!arvif->tx_paused)
+			ieee80211_wake_queue(ar->hw, arvif->vdev_id);
+}
+
+static inline void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= BITS_PER_LONG);
+	arvif->tx_paused |= BIT(reason);
+	ieee80211_stop_queue(ar->hw, arvif->vdev_id);
+}
+
+static inline void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif,
+					    int reason)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->htt.tx_lock);
+
+	WARN_ON(reason >= BITS_PER_LONG);
+	arvif->tx_paused &= ~BIT(reason);
+
+	if (ar->tx_paused)
+		return;
+
+	if (arvif->tx_paused)
+		return;
+
+	ieee80211_wake_queue(ar->hw, arvif->vdev_id);
+}
+
 #endif /* _MAC_H_ */
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 7/8] ath10k: implement tx pause wmi event
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

New wmi-tlv firmware can ask host to pause certain
tx queues. This is used to improve multi-channel
performance.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 12 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 86 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 42 +++++++++++++++
 3 files changed, 140 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9b6fab4..6e069a8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3430,6 +3430,14 @@ err:
 	return ret;
 }
 
+static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif)
+{
+	int i;
+
+	for (i = 0; i < BITS_PER_LONG; i++)
+		ath10k_mac_vif_tx_unlock(arvif, i);
+}
+
 static void ath10k_remove_interface(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif)
 {
@@ -3498,6 +3506,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
 	}
 
+	spin_lock_bh(&ar->htt.tx_lock);
+	ath10k_mac_vif_tx_unlock_all(arvif);
+	spin_unlock_bh(&ar->htt.tx_lock);
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ef55110..b1461ca 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -16,6 +16,7 @@
  */
 #include "core.h"
 #include "debug.h"
+#include "mac.h"
 #include "hw.h"
 #include "wmi.h"
 #include "wmi-ops.h"
@@ -62,6 +63,8 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
 		= { .min_len = sizeof(struct wmi_tlv_bcn_tx_status_ev) },
 	[WMI_TLV_TAG_STRUCT_DIAG_DATA_CONTAINER_EVENT]
 		= { .min_len = sizeof(struct wmi_tlv_diag_data_ev) },
+	[WMI_TLV_TAG_STRUCT_TX_PAUSE_EVENT]
+		= { .min_len = sizeof(struct wmi_tlv_tx_pause_ev) },
 };
 
 static int
@@ -296,6 +299,86 @@ static int ath10k_wmi_tlv_event_diag(struct ath10k *ar,
 	return 0;
 }
 
+static int ath10k_wmi_tlv_event_tx_pause(struct ath10k *ar,
+					 struct sk_buff *skb)
+{
+	const void **tb;
+	const struct wmi_tlv_tx_pause_ev *ev;
+	int ret, vdev_id;
+	u32 pause_id, action, vdev_map, peer_id, tid_map;
+	struct ath10k_vif *arvif;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath10k_warn(ar, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TLV_TAG_STRUCT_TX_PAUSE_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	pause_id = __le32_to_cpu(ev->pause_id);
+	action = __le32_to_cpu(ev->action);
+	vdev_map = __le32_to_cpu(ev->vdev_map);
+	peer_id = __le32_to_cpu(ev->peer_id);
+	tid_map = __le32_to_cpu(ev->tid_map);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi tlv tx pause pause_id %u action %u vdev_map 0x%08x peer_id %u tid_map 0x%08x\n",
+		   pause_id, action, vdev_map, peer_id, tid_map);
+
+	for (vdev_id = 0; vdev_map; vdev_id++) {
+		if (!(vdev_map & BIT(vdev_id)))
+			continue;
+
+		vdev_map &= ~BIT(vdev_id);
+
+		spin_lock_bh(&ar->htt.tx_lock);
+		spin_lock_bh(&ar->data_lock);
+
+		arvif = ath10k_get_arvif(ar, vdev_id);
+		if (!arvif) {
+			ath10k_warn(ar, "failed to find arvif for vdev %i for tx pause event\n",
+				    vdev_id);
+			spin_unlock_bh(&ar->data_lock);
+			spin_unlock_bh(&ar->htt.tx_lock);
+			continue;
+		}
+
+		/* FIXME: Some pause_id aren't vdev orinted. Instead they are
+		 * peer_id oriented (mostly for AP mode scenarios).
+		 */
+		if (pause_id == WMI_TLV_TX_PAUSE_ID_MCC ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_P2P_GO_PS ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_AP_PS ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_IBSS_PS) {
+			switch (action) {
+			case WMI_TLV_TX_PAUSE_ACTION_STOP:
+				ath10k_mac_vif_tx_lock(arvif, pause_id);
+				break;
+			case WMI_TLV_TX_PAUSE_ACTION_WAKE:
+				ath10k_mac_vif_tx_unlock(arvif, pause_id);
+				break;
+			default:
+				ath10k_warn(ar, "received unknown tx pause action %d on vdev %i, ignoring\n",
+					    action, vdev_id);
+				break;
+			}
+		}
+
+		spin_unlock_bh(&ar->data_lock);
+		spin_unlock_bh(&ar->htt.tx_lock);
+	}
+
+	kfree(tb);
+	return 0;
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -417,6 +500,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_DIAG_EVENTID:
 		ath10k_wmi_tlv_event_diag(ar, skb);
 		break;
+	case WMI_TLV_TX_PAUSE_EVENTID:
+		ath10k_wmi_tlv_event_tx_pause(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index c311b3c..9d61063 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1432,6 +1432,48 @@ struct wmi_tlv_adaptive_qcs {
 	__le32 enable;
 } __packed;
 
+/**
+ * wmi_tlv_tx_pause_id - firmware tx queue pause reason types
+ *
+ * @WMI_TLV_TX_PAUSE_ID_MCC: used for by multi-channel firmware scheduler.
+ *		Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PEER_PS: peer in AP mode is asleep.
+ *		Only peer_id is valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PEER_UAPSD: Only peer_id and tid_map are valid.
+ * @WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA: Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_P2P_GO_PS: Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_STA_ADD_BA: Only peer_id and tid_map are valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PS: When all peers are asleep in AP mode. Only
+ *		vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_IBSS_PS: When all peers are asleep in IBSS mode. Only
+ *		vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_HOST: Host itself requested tx pause.
+ */
+enum wmi_tlv_tx_pause_id {
+	WMI_TLV_TX_PAUSE_ID_MCC = 1,
+	WMI_TLV_TX_PAUSE_ID_AP_PEER_PS = 2,
+	WMI_TLV_TX_PAUSE_ID_AP_PEER_UAPSD = 3,
+	WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA = 4,
+	WMI_TLV_TX_PAUSE_ID_P2P_GO_PS = 5,
+	WMI_TLV_TX_PAUSE_ID_STA_ADD_BA = 6,
+	WMI_TLV_TX_PAUSE_ID_AP_PS = 7,
+	WMI_TLV_TX_PAUSE_ID_IBSS_PS = 8,
+	WMI_TLV_TX_PAUSE_ID_HOST = 21,
+};
+
+enum wmi_tlv_tx_pause_action {
+	WMI_TLV_TX_PAUSE_ACTION_STOP,
+	WMI_TLV_TX_PAUSE_ACTION_WAKE,
+};
+
+struct wmi_tlv_tx_pause_ev {
+	__le32 pause_id;
+	__le32 action;
+	__le32 vdev_map;
+	__le32 peer_id;
+	__le32 tid_map;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 7/8] ath10k: implement tx pause wmi event
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

New wmi-tlv firmware can ask host to pause certain
tx queues. This is used to improve multi-channel
performance.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 12 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 86 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 42 +++++++++++++++
 3 files changed, 140 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9b6fab4..6e069a8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3430,6 +3430,14 @@ err:
 	return ret;
 }
 
+static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif)
+{
+	int i;
+
+	for (i = 0; i < BITS_PER_LONG; i++)
+		ath10k_mac_vif_tx_unlock(arvif, i);
+}
+
 static void ath10k_remove_interface(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif)
 {
@@ -3498,6 +3506,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
 	}
 
+	spin_lock_bh(&ar->htt.tx_lock);
+	ath10k_mac_vif_tx_unlock_all(arvif);
+	spin_unlock_bh(&ar->htt.tx_lock);
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ef55110..b1461ca 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -16,6 +16,7 @@
  */
 #include "core.h"
 #include "debug.h"
+#include "mac.h"
 #include "hw.h"
 #include "wmi.h"
 #include "wmi-ops.h"
@@ -62,6 +63,8 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
 		= { .min_len = sizeof(struct wmi_tlv_bcn_tx_status_ev) },
 	[WMI_TLV_TAG_STRUCT_DIAG_DATA_CONTAINER_EVENT]
 		= { .min_len = sizeof(struct wmi_tlv_diag_data_ev) },
+	[WMI_TLV_TAG_STRUCT_TX_PAUSE_EVENT]
+		= { .min_len = sizeof(struct wmi_tlv_tx_pause_ev) },
 };
 
 static int
@@ -296,6 +299,86 @@ static int ath10k_wmi_tlv_event_diag(struct ath10k *ar,
 	return 0;
 }
 
+static int ath10k_wmi_tlv_event_tx_pause(struct ath10k *ar,
+					 struct sk_buff *skb)
+{
+	const void **tb;
+	const struct wmi_tlv_tx_pause_ev *ev;
+	int ret, vdev_id;
+	u32 pause_id, action, vdev_map, peer_id, tid_map;
+	struct ath10k_vif *arvif;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath10k_warn(ar, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TLV_TAG_STRUCT_TX_PAUSE_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	pause_id = __le32_to_cpu(ev->pause_id);
+	action = __le32_to_cpu(ev->action);
+	vdev_map = __le32_to_cpu(ev->vdev_map);
+	peer_id = __le32_to_cpu(ev->peer_id);
+	tid_map = __le32_to_cpu(ev->tid_map);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi tlv tx pause pause_id %u action %u vdev_map 0x%08x peer_id %u tid_map 0x%08x\n",
+		   pause_id, action, vdev_map, peer_id, tid_map);
+
+	for (vdev_id = 0; vdev_map; vdev_id++) {
+		if (!(vdev_map & BIT(vdev_id)))
+			continue;
+
+		vdev_map &= ~BIT(vdev_id);
+
+		spin_lock_bh(&ar->htt.tx_lock);
+		spin_lock_bh(&ar->data_lock);
+
+		arvif = ath10k_get_arvif(ar, vdev_id);
+		if (!arvif) {
+			ath10k_warn(ar, "failed to find arvif for vdev %i for tx pause event\n",
+				    vdev_id);
+			spin_unlock_bh(&ar->data_lock);
+			spin_unlock_bh(&ar->htt.tx_lock);
+			continue;
+		}
+
+		/* FIXME: Some pause_id aren't vdev orinted. Instead they are
+		 * peer_id oriented (mostly for AP mode scenarios).
+		 */
+		if (pause_id == WMI_TLV_TX_PAUSE_ID_MCC ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_P2P_GO_PS ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_AP_PS ||
+		    pause_id == WMI_TLV_TX_PAUSE_ID_IBSS_PS) {
+			switch (action) {
+			case WMI_TLV_TX_PAUSE_ACTION_STOP:
+				ath10k_mac_vif_tx_lock(arvif, pause_id);
+				break;
+			case WMI_TLV_TX_PAUSE_ACTION_WAKE:
+				ath10k_mac_vif_tx_unlock(arvif, pause_id);
+				break;
+			default:
+				ath10k_warn(ar, "received unknown tx pause action %d on vdev %i, ignoring\n",
+					    action, vdev_id);
+				break;
+			}
+		}
+
+		spin_unlock_bh(&ar->data_lock);
+		spin_unlock_bh(&ar->htt.tx_lock);
+	}
+
+	kfree(tb);
+	return 0;
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -417,6 +500,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_DIAG_EVENTID:
 		ath10k_wmi_tlv_event_diag(ar, skb);
 		break;
+	case WMI_TLV_TX_PAUSE_EVENTID:
+		ath10k_wmi_tlv_event_tx_pause(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index c311b3c..9d61063 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1432,6 +1432,48 @@ struct wmi_tlv_adaptive_qcs {
 	__le32 enable;
 } __packed;
 
+/**
+ * wmi_tlv_tx_pause_id - firmware tx queue pause reason types
+ *
+ * @WMI_TLV_TX_PAUSE_ID_MCC: used for by multi-channel firmware scheduler.
+ *		Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PEER_PS: peer in AP mode is asleep.
+ *		Only peer_id is valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PEER_UAPSD: Only peer_id and tid_map are valid.
+ * @WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA: Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_P2P_GO_PS: Only vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_STA_ADD_BA: Only peer_id and tid_map are valid.
+ * @WMI_TLV_TX_PAUSE_ID_AP_PS: When all peers are asleep in AP mode. Only
+ *		vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_IBSS_PS: When all peers are asleep in IBSS mode. Only
+ *		vdev_map is valid.
+ * @WMI_TLV_TX_PAUSE_ID_HOST: Host itself requested tx pause.
+ */
+enum wmi_tlv_tx_pause_id {
+	WMI_TLV_TX_PAUSE_ID_MCC = 1,
+	WMI_TLV_TX_PAUSE_ID_AP_PEER_PS = 2,
+	WMI_TLV_TX_PAUSE_ID_AP_PEER_UAPSD = 3,
+	WMI_TLV_TX_PAUSE_ID_P2P_CLI_NOA = 4,
+	WMI_TLV_TX_PAUSE_ID_P2P_GO_PS = 5,
+	WMI_TLV_TX_PAUSE_ID_STA_ADD_BA = 6,
+	WMI_TLV_TX_PAUSE_ID_AP_PS = 7,
+	WMI_TLV_TX_PAUSE_ID_IBSS_PS = 8,
+	WMI_TLV_TX_PAUSE_ID_HOST = 21,
+};
+
+enum wmi_tlv_tx_pause_action {
+	WMI_TLV_TX_PAUSE_ACTION_STOP,
+	WMI_TLV_TX_PAUSE_ACTION_WAKE,
+};
+
+struct wmi_tlv_tx_pause_ev {
+	__le32 pause_id;
+	__le32 action;
+	__le32 vdev_map;
+	__le32 peer_id;
+	__le32 tid_map;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 8/8] ath10k: add proper wmi-tlv combinations
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-09 11:14   ` Michal Kazior
  -1 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This adds proper wmi-tlv combinations for both
single- and multi-channel operation.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 81 ++++++++++++++++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6e069a8..8297c19 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2913,6 +2913,15 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_core_stop;
 	}
 
+	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_adaptive_qcs(ar, true);
+		if (ret) {
+			ath10k_warn(ar, "failed to enable adaptive qcs: %d\n",
+				    ret);
+			goto err_core_stop;
+		}
+	}
+
 	if (ar->cfg_tx_chainmask)
 		__ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
 				     ar->cfg_rx_chainmask);
@@ -5523,6 +5532,64 @@ static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
 	},
 };
 
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION) |
+			 BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			 BIT(NL80211_IFTYPE_P2P_GO),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+	},
+};
+
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = {
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_ADHOC),
+	},
+};
+
+/* FIXME: This is not thouroughly tested. These combinations may over- or
+ * underestimate hw/fw capabilities.
+ */
+static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
+static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 2,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
 static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 {
 	struct ieee80211_sta_vht_cap vht_cap = {0};
@@ -5773,12 +5840,24 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	switch (ar->wmi.op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
-	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
 		ar->hw->wiphy->n_iface_combinations =
 			ARRAY_SIZE(ath10k_if_comb);
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
+		if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+			ar->hw->wiphy->iface_combinations =
+				ath10k_tlv_qcs_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_qcs_if_comb);
+		} else {
+			ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_if_comb);
+		}
+		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+		break;
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
-- 
1.8.5.3


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [RFC 8/8] ath10k: add proper wmi-tlv combinations
@ 2015-01-09 11:14   ` Michal Kazior
  0 siblings, 0 replies; 20+ messages in thread
From: Michal Kazior @ 2015-01-09 11:14 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless, Michal Kazior

This adds proper wmi-tlv combinations for both
single- and multi-channel operation.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 81 ++++++++++++++++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6e069a8..8297c19 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2913,6 +2913,15 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_core_stop;
 	}
 
+	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_adaptive_qcs(ar, true);
+		if (ret) {
+			ath10k_warn(ar, "failed to enable adaptive qcs: %d\n",
+				    ret);
+			goto err_core_stop;
+		}
+	}
+
 	if (ar->cfg_tx_chainmask)
 		__ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
 				     ar->cfg_rx_chainmask);
@@ -5523,6 +5532,64 @@ static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
 	},
 };
 
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION) |
+			 BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			 BIT(NL80211_IFTYPE_P2P_GO),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+	},
+};
+
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = {
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_ADHOC),
+	},
+};
+
+/* FIXME: This is not thouroughly tested. These combinations may over- or
+ * underestimate hw/fw capabilities.
+ */
+static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
+static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 2,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
 static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 {
 	struct ieee80211_sta_vht_cap vht_cap = {0};
@@ -5773,12 +5840,24 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	switch (ar->wmi.op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
-	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
 		ar->hw->wiphy->n_iface_combinations =
 			ARRAY_SIZE(ath10k_if_comb);
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
+		if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+			ar->hw->wiphy->iface_combinations =
+				ath10k_tlv_qcs_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_qcs_if_comb);
+		} else {
+			ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_if_comb);
+		}
+		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+		break;
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
-- 
1.8.5.3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread
* Re: [RFC 0/8] ath10k: add multi-channel support
  2015-01-09 11:14 ` Michal Kazior
@ 2015-01-16 12:22   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2015-01-16 12:22 UTC (permalink / raw)
  To: Michal Kazior; +Cc: ath10k, linux-wireless

Michal Kazior <michal.kazior@tieto.com> writes:

> New wmi-tlv firmware and new hardware will support
> multi-channel operation.
>
> This prepares the driver by implementing chanctx,
> improves tx queue locking and introduces initial
> interface combinations.
>
> I'm posting this as an RFC first because I'd like
> to get some early feedback (if possible) while I
> upstream other patches this patchset is basing on.
>
>
> Michal Kazior (8):
>   ath10k: defer AP self-peer removal wait
>   ath10k: allow empty ssid vdev config
>   ath10k: implement chanctx API
>   ath10k: implement adaptive qcs command
>   ath10k: protect ar->arvifs linking with data_lock
>   ath10k: rework tx queue locking
>   ath10k: implement tx pause wmi event
>   ath10k: add proper wmi-tlv combinations

>From a quick review looks good to me. Sorry for taking so long with
this.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [RFC 0/8] ath10k: add multi-channel support
@ 2015-01-16 12:22   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2015-01-16 12:22 UTC (permalink / raw)
  To: Michal Kazior; +Cc: linux-wireless, ath10k

Michal Kazior <michal.kazior@tieto.com> writes:

> New wmi-tlv firmware and new hardware will support
> multi-channel operation.
>
> This prepares the driver by implementing chanctx,
> improves tx queue locking and introduces initial
> interface combinations.
>
> I'm posting this as an RFC first because I'd like
> to get some early feedback (if possible) while I
> upstream other patches this patchset is basing on.
>
>
> Michal Kazior (8):
>   ath10k: defer AP self-peer removal wait
>   ath10k: allow empty ssid vdev config
>   ath10k: implement chanctx API
>   ath10k: implement adaptive qcs command
>   ath10k: protect ar->arvifs linking with data_lock
>   ath10k: rework tx queue locking
>   ath10k: implement tx pause wmi event
>   ath10k: add proper wmi-tlv combinations

From a quick review looks good to me. Sorry for taking so long with
this.

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 20+ messages in thread
end of thread, other threads:[~2015-01-16 12:23 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-09 11:14 [RFC 0/8] ath10k: add multi-channel support Michal Kazior
2015-01-09 11:14 ` Michal Kazior
2015-01-09 11:14 ` [RFC 1/8] ath10k: defer AP self-peer removal wait Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 2/8] ath10k: allow empty ssid vdev config Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 3/8] ath10k: implement chanctx API Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 4/8] ath10k: implement adaptive qcs command Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 5/8] ath10k: protect ar->arvifs linking with data_lock Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 6/8] ath10k: rework tx queue locking Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 7/8] ath10k: implement tx pause wmi event Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-09 11:14 ` [RFC 8/8] ath10k: add proper wmi-tlv combinations Michal Kazior
2015-01-09 11:14   ` Michal Kazior
2015-01-16 12:22 ` [RFC 0/8] ath10k: add multi-channel support Kalle Valo
2015-01-16 12:22   ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.