* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-09 13:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon, Magnus,
This patch series (by Magnus) introduces multiplatform support for the
sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
kernel fine, except for working Ethernet (the ZB clock is disabled by
clk_disable_unused()).
This series has been sent before by Magnus as part of the series
"[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
I've updated the kzm9g DTS sync patch for recent changes to the
kzm9g-reference DTS.
Thanks for applying!
Magnus Damm (4):
ARM: shmobile: sh73a0: Introduce generic setup callback
ARM: shmobile: sh73a0: Add Multiplatform support
ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
ARM: shmobile: kzm9g: Build DTS for Multiplatform
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/sh73a0-kzm9g.dts | 374 +++++++++++++++++++++++++++++++++-
arch/arm/mach-shmobile/Kconfig | 5 +
arch/arm/mach-shmobile/Makefile | 4 +-
arch/arm/mach-shmobile/setup-sh73a0.c | 16 +-
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
6 files changed, 396 insertions(+), 8 deletions(-)
--
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 1/4] ARM: shmobile: sh73a0: Introduce generic setup callback
2015-01-09 13:08 ` Geert Uytterhoeven
@ 2015-01-09 13:08 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Add a generic sh73a0 machine setup callback for the upcoming
sh73a0 multiplatform case. Cache needs to be configured, and
legacy clocks must be omitted.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/mach-shmobile/setup-sh73a0.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 613ce65184a6648c..ee86ca0a261c9d54 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -30,6 +30,7 @@
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -782,8 +783,6 @@ void __init sh73a0_add_early_devices(void)
shmobile_setup_console();
}
-#ifdef CONFIG_USE_OF
-
void __init sh73a0_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -800,6 +799,17 @@ static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
writel((1 << 31), RESCNT2);
}
+#ifdef CONFIG_USE_OF
+
+static void __init sh73a0_generic_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 64K*8way */
+ l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
+#endif
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
static const char *sh73a0_boards_compat_dt[] __initdata = {
"renesas,sh73a0",
NULL,
@@ -809,7 +819,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = shmobile_init_delay,
- .init_machine = sh73a0_add_standard_devices_dt,
+ .init_machine = sh73a0_generic_init,
.init_late = shmobile_init_late,
.restart = sh73a0_restart,
.dt_compat = sh73a0_boards_compat_dt,
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 1/4] ARM: shmobile: sh73a0: Introduce generic setup callback
@ 2015-01-09 13:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Add a generic sh73a0 machine setup callback for the upcoming
sh73a0 multiplatform case. Cache needs to be configured, and
legacy clocks must be omitted.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/mach-shmobile/setup-sh73a0.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 613ce65184a6648c..ee86ca0a261c9d54 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -30,6 +30,7 @@
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -782,8 +783,6 @@ void __init sh73a0_add_early_devices(void)
shmobile_setup_console();
}
-#ifdef CONFIG_USE_OF
-
void __init sh73a0_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -800,6 +799,17 @@ static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
writel((1 << 31), RESCNT2);
}
+#ifdef CONFIG_USE_OF
+
+static void __init sh73a0_generic_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 64K*8way */
+ l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
+#endif
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
static const char *sh73a0_boards_compat_dt[] __initdata = {
"renesas,sh73a0",
NULL,
@@ -809,7 +819,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = shmobile_init_delay,
- .init_machine = sh73a0_add_standard_devices_dt,
+ .init_machine = sh73a0_generic_init,
.init_late = shmobile_init_late,
.restart = sh73a0_restart,
.dt_compat = sh73a0_boards_compat_dt,
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 2/4] ARM: shmobile: sh73a0: Add Multiplatform support
2015-01-09 13:08 ` Geert Uytterhoeven
@ 2015-01-09 13:08 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Enable sh73a0 Multiplatform support for the generic sh73a0
machine vector. No board support is enabled, and the board
code for KZM9G DT Reference is left by itself.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/mach-shmobile/Kconfig | 5 +++++
arch/arm/mach-shmobile/Makefile | 4 ++--
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 2f36c85eec4b201e..8ee2f281f2a3dd6a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -78,6 +78,11 @@ config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
+config ARCH_SH73A0
+ bool "SH-Mobile AG5 (R8A73A00)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
comment "Renesas ARM SoCs Board Type"
config MACH_MARZEN
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index d53996e6da970d8d..b400f5fe72c269af 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -7,7 +7,7 @@ obj-y := timer.o console.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
+obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index c16dbfe9836c527d..2106d6b76a069392 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -33,7 +33,7 @@
#define SH73A0_SCU_BASE 0xf0000000
-#ifdef CONFIG_HAVE_ARM_TWD
+#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
void __init sh73a0_register_twd(void)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 2/4] ARM: shmobile: sh73a0: Add Multiplatform support
@ 2015-01-09 13:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Enable sh73a0 Multiplatform support for the generic sh73a0
machine vector. No board support is enabled, and the board
code for KZM9G DT Reference is left by itself.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/mach-shmobile/Kconfig | 5 +++++
arch/arm/mach-shmobile/Makefile | 4 ++--
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 2f36c85eec4b201e..8ee2f281f2a3dd6a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -78,6 +78,11 @@ config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
+config ARCH_SH73A0
+ bool "SH-Mobile AG5 (R8A73A00)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
comment "Renesas ARM SoCs Board Type"
config MACH_MARZEN
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index d53996e6da970d8d..b400f5fe72c269af 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -7,7 +7,7 @@ obj-y := timer.o console.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
+obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index c16dbfe9836c527d..2106d6b76a069392 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -33,7 +33,7 @@
#define SH73A0_SCU_BASE 0xf0000000
-#ifdef CONFIG_HAVE_ARM_TWD
+#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
void __init sh73a0_register_twd(void)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 3/4] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
2015-01-09 13:08 ` Geert Uytterhoeven
@ 2015-01-09 13:08 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Sync the two DTS for the KZM9G board. The target is the file
"sh73a0-kzm9g.dts" and it is made identical to the DT reference
case with the exception of the compatbile string. In the future
the DT reference file will go away.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[geert: Update for recent changes to sh73a0-kzm9g-reference.dts]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 374 ++++++++++++++++++++++++++++++++++++-
1 file changed, 373 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index e7dae01933a575f1..6f00e6b680e8e0fa 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -1,6 +1,9 @@
/*
* Device Tree Source for the KZM-A9-GT board
*
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
@@ -10,17 +13,386 @@
/dts-v1/;
#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
+ aliases {
+ serial4 = &scifa4;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc_sdhi0: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lan9220@10000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x10000000 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ label = "LED1";
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ label = "LED2";
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ label = "LED4";
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW3";
+ };
+
+ right-key {
+ gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ label = "SW2-R";
+ };
+
+ left-key {
+ gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ label = "SW2-L";
+ };
+
+ enter-key {
+ gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ label = "SW2-P";
+ };
+
+ up-key {
+ gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ label = "SW2-U";
+ };
+
+ down-key {
+ gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ label = "SW2-D";
+ };
+
+ home-key {
+ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&cmt1 {
+ status = "okay";
+};
+
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ compass@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ ak4648: codec@12 {
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ #sound-dai-cells = <0>;
+ };
+
+ accelerometer@1d {
+ compatible = "adi,adxl34x";
+ reg = <0x1d>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtc@32 {
+ compatible = "ricoh,r2025sd";
+ reg = <0x32>;
+ };
+
+ as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8575: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ vmmc-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&pfc {
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmc {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: serial4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+ "fsia_data_in", "fsia_data_out";
+ renesas,function = "fsia";
+ };
+};
+
+&scifa4 {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi0>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi2>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 3/4] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
@ 2015-01-09 13:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Sync the two DTS for the KZM9G board. The target is the file
"sh73a0-kzm9g.dts" and it is made identical to the DT reference
case with the exception of the compatbile string. In the future
the DT reference file will go away.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[geert: Update for recent changes to sh73a0-kzm9g-reference.dts]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 374 ++++++++++++++++++++++++++++++++++++-
1 file changed, 373 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index e7dae01933a575f1..6f00e6b680e8e0fa 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -1,6 +1,9 @@
/*
* Device Tree Source for the KZM-A9-GT board
*
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
@@ -10,17 +13,386 @@
/dts-v1/;
#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
+ aliases {
+ serial4 = &scifa4;
+ };
+
+ cpus {
+ cpu at 0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_1p8v: regulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc_sdhi0: regulator at 2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator at 3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lan9220 at 10000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x10000000 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ label = "LED1";
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ label = "LED2";
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ label = "LED4";
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW3";
+ };
+
+ right-key {
+ gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ label = "SW2-R";
+ };
+
+ left-key {
+ gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ label = "SW2-L";
+ };
+
+ enter-key {
+ gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ label = "SW2-P";
+ };
+
+ up-key {
+ gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ label = "SW2-U";
+ };
+
+ down-key {
+ gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ label = "SW2-D";
+ };
+
+ home-key {
+ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&cmt1 {
+ status = "okay";
+};
+
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ compass at c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ ak4648: codec at 12 {
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ #sound-dai-cells = <0>;
+ };
+
+ accelerometer at 1d {
+ compatible = "adi,adxl34x";
+ reg = <0x1d>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtc at 32 {
+ compatible = "ricoh,r2025sd";
+ reg = <0x32>;
+ };
+
+ as3711 at 40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen at 55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8575: gpio at 20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ vmmc-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&pfc {
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmc {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: serial4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+ "fsia_data_in", "fsia_data_out";
+ renesas,function = "fsia";
+ };
+};
+
+&scifa4 {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi0>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi2>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 4/4] ARM: shmobile: kzm9g: Build DTS for Multiplatform
2015-01-09 13:08 ` Geert Uytterhoeven
@ 2015-01-09 13:08 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Build the sh73a0 KZM9G board DTB in case of Multiplatform.
The DT reference case will be removed in the future and
can be ignored for now.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59e79e9167af28dd..52844bf64d22cc8c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -421,7 +421,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7794-alt.dtb
+ r8a7794-alt.dtb \
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 4/4] ARM: shmobile: kzm9g: Build DTS for Multiplatform
@ 2015-01-09 13:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:08 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Build the sh73a0 KZM9G board DTB in case of Multiplatform.
The DT reference case will be removed in the future and
can be ignored for now.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59e79e9167af28dd..52844bf64d22cc8c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -421,7 +421,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7794-alt.dtb
+ r8a7794-alt.dtb \
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-09 13:24 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon, Magnus,
This patch series completes the migration from kzm9g-reference (legacy
DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
common clock framework).
- The first two patches fix Ethernet on kzm9g, by adding a Bus State
Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
Add Simple Power-Managed Bus", and moving the Ethernet node to it,
- The third path enables kzm9g support in shmobile_defconfig,
- The fourth patch removes all kzm9g-reference support, now the
sh73a0 generic multiplatform case has the same feature set
(better, it provides 16 MiB more RAM!).
Thanks for applying!
Geert Uytterhoeven (4):
ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node
ARM: shmobile: kzm9g dts: Move Ethernet node to BSC
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
ARM: shmobile: kzm9g-reference: Remove board C code and DT file
Documentation/devicetree/bindings/arm/shmobile.txt | 2 -
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 398 ---------------------
arch/arm/boot/dts/sh73a0-kzm9g.dts | 28 +-
arch/arm/boot/dts/sh73a0.dtsi | 10 +
arch/arm/configs/shmobile_defconfig | 19 +-
arch/arm/mach-shmobile/Kconfig | 14 -
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-kzm9g-reference.c | 62 ----
arch/arm/mach-shmobile/include/mach/zboot.h | 2 +-
11 files changed, 43 insertions(+), 497 deletions(-)
delete mode 100644 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
delete mode 100644 arch/arm/mach-shmobile/board-kzm9g-reference.c
--
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-09 13:24 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-09 13:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon, Magnus,
This patch series completes the migration from kzm9g-reference (legacy
DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
common clock framework).
- The first two patches fix Ethernet on kzm9g, by adding a Bus State
Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
Add Simple Power-Managed Bus", and moving the Ethernet node to it,
- The third path enables kzm9g support in shmobile_defconfig,
- The fourth patch removes all kzm9g-reference support, now the
sh73a0 generic multiplatform case has the same feature set
(better, it provides 16 MiB more RAM!).
Thanks for applying!
Geert Uytterhoeven (4):
ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node
ARM: shmobile: kzm9g dts: Move Ethernet node to BSC
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
ARM: shmobile: kzm9g-reference: Remove board C code and DT file
Documentation/devicetree/bindings/arm/shmobile.txt | 2 -
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 398 ---------------------
arch/arm/boot/dts/sh73a0-kzm9g.dts | 28 +-
arch/arm/boot/dts/sh73a0.dtsi | 10 +
arch/arm/configs/shmobile_defconfig | 19 +-
arch/arm/mach-shmobile/Kconfig | 14 -
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-kzm9g-reference.c | 62 ----
arch/arm/mach-shmobile/include/mach/zboot.h | 2 +-
11 files changed, 43 insertions(+), 497 deletions(-)
delete mode 100644 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
delete mode 100644 arch/arm/mach-shmobile/board-kzm9g-reference.c
--
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
2015-01-09 13:24 ` Geert Uytterhoeven
@ 2015-01-13 2:08 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-13 2:08 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> This patch series completes the migration from kzm9g-reference (legacy
> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> common clock framework).
>
> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> - The third path enables kzm9g support in shmobile_defconfig,
> - The fourth patch removes all kzm9g-reference support, now the
> sh73a0 generic multiplatform case has the same feature set
> (better, it provides 16 MiB more RAM!).
>
> Thanks for applying!
It seems to me that at the first two patches require the patchset
referenced above in order to work. For that reason I am holding off
on applying this series. I am quite happy to negotiate merging
some or all of this series earlier than later :)
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-13 2:08 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-13 2:08 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> This patch series completes the migration from kzm9g-reference (legacy
> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> common clock framework).
>
> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> - The third path enables kzm9g support in shmobile_defconfig,
> - The fourth patch removes all kzm9g-reference support, now the
> sh73a0 generic multiplatform case has the same feature set
> (better, it provides 16 MiB more RAM!).
>
> Thanks for applying!
It seems to me that at the first two patches require the patchset
referenced above in order to work. For that reason I am holding off
on applying this series. I am quite happy to negotiate merging
some or all of this series earlier than later :)
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
2015-01-13 2:08 ` Simon Horman
@ 2015-01-13 10:08 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-13 10:08 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
>> Hi Simon, Magnus,
>>
>> This patch series completes the migration from kzm9g-reference (legacy
>> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
>> common clock framework).
>>
>> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
>> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
>> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
>> - The third path enables kzm9g support in shmobile_defconfig,
>> - The fourth patch removes all kzm9g-reference support, now the
>> sh73a0 generic multiplatform case has the same feature set
>> (better, it provides 16 MiB more RAM!).
>>
>> Thanks for applying!
>
> It seems to me that at the first two patches require the patchset
> referenced above in order to work. For that reason I am holding off
Yes it does.
> on applying this series. I am quite happy to negotiate merging
> some or all of this series earlier than later :)
Hence please merge both the dependency and this series.
1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
2. DT PM domain for sh73a0 and r8a73a4 depends on
sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform,
3. CONFIG_CPU_IDLE=y hangs on sh73a0 without an early timer.
- On kzm9g-multiplatform this can be fixed by adding an
arm,cortex-a9-twd-timer node, but that breaks kzm9g-reference as
the TWD driver requires CCF when instantiated from DT,
- Fixing this on kzm9g-reference requires setting
".init_time = sh73a0_earlytimer_init", and also instantiating the GIC
from C board code, as the TWD platform device uses an hardcoded
interrupt number.
It seems simpler to let kzm9g-reference die, so this problem goes
away.
Thanks for your consideration!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-13 10:08 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-13 10:08 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
>> Hi Simon, Magnus,
>>
>> This patch series completes the migration from kzm9g-reference (legacy
>> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
>> common clock framework).
>>
>> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
>> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
>> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
>> - The third path enables kzm9g support in shmobile_defconfig,
>> - The fourth patch removes all kzm9g-reference support, now the
>> sh73a0 generic multiplatform case has the same feature set
>> (better, it provides 16 MiB more RAM!).
>>
>> Thanks for applying!
>
> It seems to me that at the first two patches require the patchset
> referenced above in order to work. For that reason I am holding off
Yes it does.
> on applying this series. I am quite happy to negotiate merging
> some or all of this series earlier than later :)
Hence please merge both the dependency and this series.
1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
2. DT PM domain for sh73a0 and r8a73a4 depends on
sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform,
3. CONFIG_CPU_IDLE=y hangs on sh73a0 without an early timer.
- On kzm9g-multiplatform this can be fixed by adding an
arm,cortex-a9-twd-timer node, but that breaks kzm9g-reference as
the TWD driver requires CCF when instantiated from DT,
- Fixing this on kzm9g-reference requires setting
".init_time = sh73a0_earlytimer_init", and also instantiating the GIC
from C board code, as the TWD platform device uses an hardcoded
interrupt number.
It seems simpler to let kzm9g-reference die, so this problem goes
away.
Thanks for your consideration!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
2015-01-13 10:08 ` Geert Uytterhoeven
@ 2015-01-14 4:08 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-14 4:08 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> >> Hi Simon, Magnus,
> >>
> >> This patch series completes the migration from kzm9g-reference (legacy
> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> >> common clock framework).
> >>
> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> >> - The third path enables kzm9g support in shmobile_defconfig,
> >> - The fourth patch removes all kzm9g-reference support, now the
> >> sh73a0 generic multiplatform case has the same feature set
> >> (better, it provides 16 MiB more RAM!).
> >>
> >> Thanks for applying!
> >
> > It seems to me that at the first two patches require the patchset
> > referenced above in order to work. For that reason I am holding off
>
> Yes it does.
>
> > on applying this series. I am quite happy to negotiate merging
> > some or all of this series earlier than later :)
>
> Hence please merge both the dependency and this series.
>
> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
For some reason I assumed this would go through a different subsystem tree.
I'm fine with taking it through my tree, if you think that is best.
I am a bit worried about handling conflicts that may arise, especially from
the first two patches in that series which re-arrange things
alphabetically. But I see that the files in question are not updated very
often, so I suppose we should be safe enough.
For now I have tentatively queued up both this patchset and the
dependency listed immediately above. Please take a look
at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
> 2. DT PM domain for sh73a0 and r8a73a4 depends on
> sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform,
> 3. CONFIG_CPU_IDLE=y hangs on sh73a0 without an early timer.
> - On kzm9g-multiplatform this can be fixed by adding an
> arm,cortex-a9-twd-timer node, but that breaks kzm9g-reference as
> the TWD driver requires CCF when instantiated from DT,
> - Fixing this on kzm9g-reference requires setting
> ".init_time = sh73a0_earlytimer_init", and also instantiating the GIC
> from C board code, as the TWD platform device uses an hardcoded
> interrupt number.
> It seems simpler to let kzm9g-reference die, so this problem goes
> away.
>
> Thanks for your consideration!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-14 4:08 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-14 4:08 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> >> Hi Simon, Magnus,
> >>
> >> This patch series completes the migration from kzm9g-reference (legacy
> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> >> common clock framework).
> >>
> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> >> - The third path enables kzm9g support in shmobile_defconfig,
> >> - The fourth patch removes all kzm9g-reference support, now the
> >> sh73a0 generic multiplatform case has the same feature set
> >> (better, it provides 16 MiB more RAM!).
> >>
> >> Thanks for applying!
> >
> > It seems to me that at the first two patches require the patchset
> > referenced above in order to work. For that reason I am holding off
>
> Yes it does.
>
> > on applying this series. I am quite happy to negotiate merging
> > some or all of this series earlier than later :)
>
> Hence please merge both the dependency and this series.
>
> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
For some reason I assumed this would go through a different subsystem tree.
I'm fine with taking it through my tree, if you think that is best.
I am a bit worried about handling conflicts that may arise, especially from
the first two patches in that series which re-arrange things
alphabetically. But I see that the files in question are not updated very
often, so I suppose we should be safe enough.
For now I have tentatively queued up both this patchset and the
dependency listed immediately above. Please take a look
at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
> 2. DT PM domain for sh73a0 and r8a73a4 depends on
> sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform,
> 3. CONFIG_CPU_IDLE=y hangs on sh73a0 without an early timer.
> - On kzm9g-multiplatform this can be fixed by adding an
> arm,cortex-a9-twd-timer node, but that breaks kzm9g-reference as
> the TWD driver requires CCF when instantiated from DT,
> - Fixing this on kzm9g-reference requires setting
> ".init_time = sh73a0_earlytimer_init", and also instantiating the GIC
> from C board code, as the TWD platform device uses an hardcoded
> interrupt number.
> It seems simpler to let kzm9g-reference die, so this problem goes
> away.
>
> Thanks for your consideration!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
2015-01-14 4:08 ` Simon Horman
@ 2015-01-14 10:03 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-14 10:03 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Wed, Jan 14, 2015 at 5:08 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
>> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
>> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
>> >> This patch series completes the migration from kzm9g-reference (legacy
>> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
>> >> common clock framework).
>> >>
>> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
>> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
>> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
>> >> - The third path enables kzm9g support in shmobile_defconfig,
>> >> - The fourth patch removes all kzm9g-reference support, now the
>> >> sh73a0 generic multiplatform case has the same feature set
>> >> (better, it provides 16 MiB more RAM!).
>> >>
>> >> Thanks for applying!
>> >
>> > It seems to me that at the first two patches require the patchset
>> > referenced above in order to work. For that reason I am holding off
>>
>> Yes it does.
>>
>> > on applying this series. I am quite happy to negotiate merging
>> > some or all of this series earlier than later :)
>>
>> Hence please merge both the dependency and this series.
>>
>> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
>> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
>
> For some reason I assumed this would go through a different subsystem tree.
> I'm fine with taking it through my tree, if you think that is best.
There's no maintainer for drivers/bus/, and as kzm9g-multiplatform depends on
it, your tree looks fine to me.
> I am a bit worried about handling conflicts that may arise, especially from
> the first two patches in that series which re-arrange things
> alphabetically. But I see that the files in question are not updated very
> often, so I suppose we should be safe enough.
Indeed.
> For now I have tentatively queued up both this patchset and the
> dependency listed immediately above. Please take a look
> at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
> and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
Thanks, looks fine!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-14 10:03 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-14 10:03 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Wed, Jan 14, 2015 at 5:08 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
>> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
>> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
>> >> This patch series completes the migration from kzm9g-reference (legacy
>> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
>> >> common clock framework).
>> >>
>> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
>> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
>> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
>> >> - The third path enables kzm9g support in shmobile_defconfig,
>> >> - The fourth patch removes all kzm9g-reference support, now the
>> >> sh73a0 generic multiplatform case has the same feature set
>> >> (better, it provides 16 MiB more RAM!).
>> >>
>> >> Thanks for applying!
>> >
>> > It seems to me that at the first two patches require the patchset
>> > referenced above in order to work. For that reason I am holding off
>>
>> Yes it does.
>>
>> > on applying this series. I am quite happy to negotiate merging
>> > some or all of this series earlier than later :)
>>
>> Hence please merge both the dependency and this series.
>>
>> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
>> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
>
> For some reason I assumed this would go through a different subsystem tree.
> I'm fine with taking it through my tree, if you think that is best.
There's no maintainer for drivers/bus/, and as kzm9g-multiplatform depends on
it, your tree looks fine to me.
> I am a bit worried about handling conflicts that may arise, especially from
> the first two patches in that series which re-arrange things
> alphabetically. But I see that the files in question are not updated very
> often, so I suppose we should be safe enough.
Indeed.
> For now I have tentatively queued up both this patchset and the
> dependency listed immediately above. Please take a look
> at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
> and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
Thanks, looks fine!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
2015-01-14 10:03 ` Geert Uytterhoeven
@ 2015-01-14 23:34 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-14 23:34 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 14, 2015 at 11:03:42AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Wed, Jan 14, 2015 at 5:08 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
> >> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> >> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> >> >> This patch series completes the migration from kzm9g-reference (legacy
> >> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> >> >> common clock framework).
> >> >>
> >> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> >> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> >> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> >> >> - The third path enables kzm9g support in shmobile_defconfig,
> >> >> - The fourth patch removes all kzm9g-reference support, now the
> >> >> sh73a0 generic multiplatform case has the same feature set
> >> >> (better, it provides 16 MiB more RAM!).
> >> >>
> >> >> Thanks for applying!
> >> >
> >> > It seems to me that at the first two patches require the patchset
> >> > referenced above in order to work. For that reason I am holding off
> >>
> >> Yes it does.
> >>
> >> > on applying this series. I am quite happy to negotiate merging
> >> > some or all of this series earlier than later :)
> >>
> >> Hence please merge both the dependency and this series.
> >>
> >> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
> >> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
> >
> > For some reason I assumed this would go through a different subsystem tree.
> > I'm fine with taking it through my tree, if you think that is best.
>
> There's no maintainer for drivers/bus/, and as kzm9g-multiplatform depends on
> it, your tree looks fine to me.
On closer examination I also see that there is no drivers/bus/ maintainer.
So yes, I agree we should be fine.
> > I am a bit worried about handling conflicts that may arise, especially from
> > the first two patches in that series which re-arrange things
> > alphabetically. But I see that the files in question are not updated very
> > often, so I suppose we should be safe enough.
>
> Indeed.
>
> > For now I have tentatively queued up both this patchset and the
> > dependency listed immediately above. Please take a look
> > at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
> > and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
>
> Thanks, looks fine!
Great, thanks for checking.
My plan is to send pull-requests for those branches once they
have sat in next for a little bit. By my calculations that should be early
next week.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Complete multiplatform support
@ 2015-01-14 23:34 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-14 23:34 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 14, 2015 at 11:03:42AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Wed, Jan 14, 2015 at 5:08 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jan 13, 2015 at 11:08:20AM +0100, Geert Uytterhoeven wrote:
> >> On Tue, Jan 13, 2015 at 3:08 AM, Simon Horman <horms@verge.net.au> wrote:
> >> > On Fri, Jan 09, 2015 at 02:24:26PM +0100, Geert Uytterhoeven wrote:
> >> >> This patch series completes the migration from kzm9g-reference (legacy
> >> >> DT based) to kzm9g-multiplatform (ARM multiplatform DT based with
> >> >> common clock framework).
> >> >>
> >> >> - The first two patches fix Ethernet on kzm9g, by adding a Bus State
> >> >> Controller node, as introduced in "[PATCH v3 0/4] drivers: bus:
> >> >> Add Simple Power-Managed Bus", and moving the Ethernet node to it,
> >> >> - The third path enables kzm9g support in shmobile_defconfig,
> >> >> - The fourth patch removes all kzm9g-reference support, now the
> >> >> sh73a0 generic multiplatform case has the same feature set
> >> >> (better, it provides 16 MiB more RAM!).
> >> >>
> >> >> Thanks for applying!
> >> >
> >> > It seems to me that at the first two patches require the patchset
> >> > referenced above in order to work. For that reason I am holding off
> >>
> >> Yes it does.
> >>
> >> > on applying this series. I am quite happy to negotiate merging
> >> > some or all of this series earlier than later :)
> >>
> >> Hence please merge both the dependency and this series.
> >>
> >> 1. Both sh73a0/kzm9g-multiplatform and r8a73a4/ape6evm-multiplatform
> >> depend on "[PATCH v3 0/4] drivers: bus: Add Simple Power-Managed Bus",
> >
> > For some reason I assumed this would go through a different subsystem tree.
> > I'm fine with taking it through my tree, if you think that is best.
>
> There's no maintainer for drivers/bus/, and as kzm9g-multiplatform depends on
> it, your tree looks fine to me.
On closer examination I also see that there is no drivers/bus/ maintainer.
So yes, I agree we should be fine.
> > I am a bit worried about handling conflicts that may arise, especially from
> > the first two patches in that series which re-arrange things
> > alphabetically. But I see that the files in question are not updated very
> > often, so I suppose we should be safe enough.
>
> Indeed.
>
> > For now I have tentatively queued up both this patchset and the
> > dependency listed immediately above. Please take a look
> > at the sh73a0-multiplatform-for-v3.20 and drivers-for-v3.20 branches
> > and the renesas-next-20150114-v3.19-rc1 tag to see if I missed something.
>
> Thanks, looks fine!
Great, thanks for checking.
My plan is to send pull-requests for those branches once they
have sat in next for a little bit. By my calculations that should be early
next week.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
2015-01-09 13:08 ` Geert Uytterhoeven
@ 2015-01-13 2:08 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-13 2:08 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> This patch series (by Magnus) introduces multiplatform support for the
> sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> kernel fine, except for working Ethernet (the ZB clock is disabled by
> clk_disable_unused()).
>
> This series has been sent before by Magnus as part of the series
> "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> I've updated the kzm9g DTS sync patch for recent changes to the
> kzm9g-reference DTS.
>
> Thanks for applying!
Thanks, done.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-13 2:08 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-13 2:08 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> This patch series (by Magnus) introduces multiplatform support for the
> sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> kernel fine, except for working Ethernet (the ZB clock is disabled by
> clk_disable_unused()).
>
> This series has been sent before by Magnus as part of the series
> "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> I've updated the kzm9g DTS sync patch for recent changes to the
> kzm9g-reference DTS.
>
> Thanks for applying!
Thanks, done.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
2015-01-13 2:08 ` Simon Horman
@ 2015-01-22 2:48 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-22 2:48 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > Hi Simon, Magnus,
> >
> > This patch series (by Magnus) introduces multiplatform support for the
> > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > clk_disable_unused()).
> >
> > This series has been sent before by Magnus as part of the series
> > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > I've updated the kzm9g DTS sync patch for recent changes to the
> > kzm9g-reference DTS.
> >
> > Thanks for applying!
>
> Thanks, done.
For the record: Olof has asked for review comments for the BSC driver
and binding patches. Accordingly I have dropped them, and these patches
which depend on them, from next.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-22 2:48 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-22 2:48 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > Hi Simon, Magnus,
> >
> > This patch series (by Magnus) introduces multiplatform support for the
> > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > clk_disable_unused()).
> >
> > This series has been sent before by Magnus as part of the series
> > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > I've updated the kzm9g DTS sync patch for recent changes to the
> > kzm9g-reference DTS.
> >
> > Thanks for applying!
>
> Thanks, done.
For the record: Olof has asked for review comments for the BSC driver
and binding patches. Accordingly I have dropped them, and these patches
which depend on them, from next.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
2015-01-22 2:48 ` Simon Horman
@ 2015-01-22 2:50 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-22 2:50 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
> On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > > Hi Simon, Magnus,
> > >
> > > This patch series (by Magnus) introduces multiplatform support for the
> > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > > clk_disable_unused()).
> > >
> > > This series has been sent before by Magnus as part of the series
> > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > > I've updated the kzm9g DTS sync patch for recent changes to the
> > > kzm9g-reference DTS.
> > >
> > > Thanks for applying!
> >
> > Thanks, done.
>
> For the record: Olof has asked for review comments for the BSC driver
> and binding patches. Accordingly I have dropped them, and these patches
> which depend on them, from next.
To clarify, this dependency may be due to the way the branches are arranged,
rather than actual dependencies of the code. But regardless I am dropping
all effected branches for now.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-22 2:50 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-22 2:50 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
> On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > > Hi Simon, Magnus,
> > >
> > > This patch series (by Magnus) introduces multiplatform support for the
> > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > > clk_disable_unused()).
> > >
> > > This series has been sent before by Magnus as part of the series
> > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > > I've updated the kzm9g DTS sync patch for recent changes to the
> > > kzm9g-reference DTS.
> > >
> > > Thanks for applying!
> >
> > Thanks, done.
>
> For the record: Olof has asked for review comments for the BSC driver
> and binding patches. Accordingly I have dropped them, and these patches
> which depend on them, from next.
To clarify, this dependency may be due to the way the branches are arranged,
rather than actual dependencies of the code. But regardless I am dropping
all effected branches for now.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
2015-01-22 2:50 ` Simon Horman
@ 2015-01-23 4:22 ` Simon Horman
-1 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-23 4:22 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:50:03AM +0900, Simon Horman wrote:
> On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
> > On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> > > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > > > Hi Simon, Magnus,
> > > >
> > > > This patch series (by Magnus) introduces multiplatform support for the
> > > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > > > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > > > clk_disable_unused()).
> > > >
> > > > This series has been sent before by Magnus as part of the series
> > > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > > > I've updated the kzm9g DTS sync patch for recent changes to the
> > > > kzm9g-reference DTS.
> > > >
> > > > Thanks for applying!
> > >
> > > Thanks, done.
> >
> > For the record: Olof has asked for review comments for the BSC driver
> > and binding patches. Accordingly I have dropped them, and these patches
> > which depend on them, from next.
>
> To clarify, this dependency may be due to the way the branches are arranged,
> rather than actual dependencies of the code. But regardless I am dropping
> all effected branches for now.
I have now had a chance to re-examine these patches and it seems to me that
they do not depend on the BSC driver (or anything else other than for
context). With that in mind I have queued them up in the
sh73a0-multiplatform-for-v3.21 which is based on the dt-for-v3.21 branch
(for context) as part of and pushed this as part of
renesas-devel-20150123-v3.19-rc5.
Please take a moment to see if what I have done makes sense to you.
For reference this covers the following patches which comprised this series:
Magnus Damm (4):
ARM: shmobile: sh73a0: Introduce generic setup callback
ARM: shmobile: sh73a0: Add Multiplatform support
ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
ARM: shmobile: kzm9g: Build DTS for Multiplatform
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-23 4:22 ` Simon Horman
0 siblings, 0 replies; 32+ messages in thread
From: Simon Horman @ 2015-01-23 4:22 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:50:03AM +0900, Simon Horman wrote:
> On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
> > On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
> > > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
> > > > Hi Simon, Magnus,
> > > >
> > > > This patch series (by Magnus) introduces multiplatform support for the
> > > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
> > > > kernel fine, except for working Ethernet (the ZB clock is disabled by
> > > > clk_disable_unused()).
> > > >
> > > > This series has been sent before by Magnus as part of the series
> > > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
> > > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
> > > > I've updated the kzm9g DTS sync patch for recent changes to the
> > > > kzm9g-reference DTS.
> > > >
> > > > Thanks for applying!
> > >
> > > Thanks, done.
> >
> > For the record: Olof has asked for review comments for the BSC driver
> > and binding patches. Accordingly I have dropped them, and these patches
> > which depend on them, from next.
>
> To clarify, this dependency may be due to the way the branches are arranged,
> rather than actual dependencies of the code. But regardless I am dropping
> all effected branches for now.
I have now had a chance to re-examine these patches and it seems to me that
they do not depend on the BSC driver (or anything else other than for
context). With that in mind I have queued them up in the
sh73a0-multiplatform-for-v3.21 which is based on the dt-for-v3.21 branch
(for context) as part of and pushed this as part of
renesas-devel-20150123-v3.19-rc5.
Please take a moment to see if what I have done makes sense to you.
For reference this covers the following patches which comprised this series:
Magnus Damm (4):
ARM: shmobile: sh73a0: Introduce generic setup callback
ARM: shmobile: sh73a0: Add Multiplatform support
ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
ARM: shmobile: kzm9g: Build DTS for Multiplatform
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
2015-01-23 4:22 ` Simon Horman
@ 2015-01-23 9:56 ` Geert Uytterhoeven
-1 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-23 9:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Fri, Jan 23, 2015 at 5:22 AM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Jan 22, 2015 at 11:50:03AM +0900, Simon Horman wrote:
>> On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
>> > On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
>> > > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
>> > > > Hi Simon, Magnus,
>> > > >
>> > > > This patch series (by Magnus) introduces multiplatform support for the
>> > > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
>> > > > kernel fine, except for working Ethernet (the ZB clock is disabled by
>> > > > clk_disable_unused()).
>> > > >
>> > > > This series has been sent before by Magnus as part of the series
>> > > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
>> > > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
>> > > > I've updated the kzm9g DTS sync patch for recent changes to the
>> > > > kzm9g-reference DTS.
>> > > >
>> > > > Thanks for applying!
>> > >
>> > > Thanks, done.
>> >
>> > For the record: Olof has asked for review comments for the BSC driver
>> > and binding patches. Accordingly I have dropped them, and these patches
>> > which depend on them, from next.
>>
>> To clarify, this dependency may be due to the way the branches are arranged,
>> rather than actual dependencies of the code. But regardless I am dropping
>> all effected branches for now.
>
> I have now had a chance to re-examine these patches and it seems to me that
> they do not depend on the BSC driver (or anything else other than for
> context). With that in mind I have queued them up in the
> sh73a0-multiplatform-for-v3.21 which is based on the dt-for-v3.21 branch
> (for context) as part of and pushed this as part of
> renesas-devel-20150123-v3.19-rc5.
>
> Please take a moment to see if what I have done makes sense to you.
OK, Thanks!
> For reference this covers the following patches which comprised this series:
>
> Magnus Damm (4):
> ARM: shmobile: sh73a0: Introduce generic setup callback
> ARM: shmobile: sh73a0: Add Multiplatform support
> ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
> ARM: shmobile: kzm9g: Build DTS for Multiplatform
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread* [PATCH 0/4] ARM: shmobile: sh73a0/kzm9g: Introduce multiplatform support
@ 2015-01-23 9:56 ` Geert Uytterhoeven
0 siblings, 0 replies; 32+ messages in thread
From: Geert Uytterhoeven @ 2015-01-23 9:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Fri, Jan 23, 2015 at 5:22 AM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Jan 22, 2015 at 11:50:03AM +0900, Simon Horman wrote:
>> On Thu, Jan 22, 2015 at 11:48:05AM +0900, Simon Horman wrote:
>> > On Tue, Jan 13, 2015 at 11:08:14AM +0900, Simon Horman wrote:
>> > > On Fri, Jan 09, 2015 at 02:08:48PM +0100, Geert Uytterhoeven wrote:
>> > > > Hi Simon, Magnus,
>> > > >
>> > > > This patch series (by Magnus) introduces multiplatform support for the
>> > > > sh73a0 platform. After this kzm9g can boot a sh73a0 multiplatform
>> > > > kernel fine, except for working Ethernet (the ZB clock is disabled by
>> > > > clk_disable_unused()).
>> > > >
>> > > > This series has been sent before by Magnus as part of the series
>> > > > "[PATCH v2 00/05] ARM: shmobile: sh73a0 and kzm9g Multiplatform
>> > > > revisit" (http://www.spinics.net/lists/linux-sh/msg38384.html).
>> > > > I've updated the kzm9g DTS sync patch for recent changes to the
>> > > > kzm9g-reference DTS.
>> > > >
>> > > > Thanks for applying!
>> > >
>> > > Thanks, done.
>> >
>> > For the record: Olof has asked for review comments for the BSC driver
>> > and binding patches. Accordingly I have dropped them, and these patches
>> > which depend on them, from next.
>>
>> To clarify, this dependency may be due to the way the branches are arranged,
>> rather than actual dependencies of the code. But regardless I am dropping
>> all effected branches for now.
>
> I have now had a chance to re-examine these patches and it seems to me that
> they do not depend on the BSC driver (or anything else other than for
> context). With that in mind I have queued them up in the
> sh73a0-multiplatform-for-v3.21 which is based on the dt-for-v3.21 branch
> (for context) as part of and pushed this as part of
> renesas-devel-20150123-v3.19-rc5.
>
> Please take a moment to see if what I have done makes sense to you.
OK, Thanks!
> For reference this covers the following patches which comprised this series:
>
> Magnus Damm (4):
> ARM: shmobile: sh73a0: Introduce generic setup callback
> ARM: shmobile: sh73a0: Add Multiplatform support
> ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
> ARM: shmobile: kzm9g: Build DTS for Multiplatform
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 32+ messages in thread