[U-Boot] [PATCH v2 1/3] samsung: board: support eMMC reset using DT

[U-Boot] [PATCH v2 1/3] samsung: board: support eMMC reset using DT

[Joonyoung Shim]

Some exynos boards require special handling of nRESET_OUT line for eMMC
memory to perform complete reboot e.g. Odroid X2/U3/XU3 boards.

This will support eMMC reset using DT from reset_misc of samsung common
board file.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
---
 board/samsung/common/board.c                   | 28 ++++++++++++++++++++++++++
 board/samsung/odroid/odroid.c                  |  8 --------
 doc/device-tree-bindings/exynos/emmc-reset.txt | 15 ++++++++++++++
 3 files changed, 43 insertions(+), 8 deletions(-)
 create mode 100644 doc/device-tree-bindings/exynos/emmc-reset.txt

diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 8b4c8e9..da2245f 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -355,3 +355,31 @@ int misc_init_r(void)
 	return 0;
 }
 #endif
+
+void reset_misc(void)
+{
+	struct gpio_desc gpio = {};
+	int node;
+
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
+			"samsung,emmc-reset");
+	if (node < 0)
+		return;
+
+	gpio_request_by_name_nodev(gd->fdt_blob, node, "reset-gpio", 0, &gpio,
+				   GPIOD_IS_OUT);
+
+	if (dm_gpio_is_valid(&gpio)) {
+		/*
+		 * Reset eMMC
+		 *
+		 * FIXME: Need to optimize delay time. Minimum 1usec pulse is
+		 *	  required by 'JEDEC Standard No.84-A441' (eMMC)
+		 *	  document but real delay time is expected to greater
+		 *	  than 1usec.
+		 */
+		dm_gpio_set_value(&gpio, 0);
+		mdelay(10);
+		dm_gpio_set_value(&gpio, 1);
+	}
+}
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index b7d2381..b648832 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -515,11 +515,3 @@ int board_usb_init(int index, enum usb_init_type init)
 	return s3c_udc_probe(&s5pc210_otg_data);
 }
 #endif
-
-void reset_misc(void)
-{
-	/* Reset eMMC*/
-	gpio_set_value(EXYNOS4X12_GPIO_K12, 0);
-	mdelay(10);
-	gpio_set_value(EXYNOS4X12_GPIO_K12, 1);
-}
diff --git a/doc/device-tree-bindings/exynos/emmc-reset.txt b/doc/device-tree-bindings/exynos/emmc-reset.txt
new file mode 100644
index 0000000..5e7ba26
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/emmc-reset.txt
@@ -0,0 +1,15 @@
+* Samsung eMMC reset
+
+Some exynos boards require special handling of nRESET_OUT line for eMMC memory
+to perform complete reboot.
+
+Required properties:
+- compatible: should be "samsung,emmc-reset"
+- reset-gpio: gpio chip for eMMC reset.
+
+Example:
+
+emmc-reset {
+        compatible = "samsung,emmc-reset";
+        reset-gpio = <&gpk1 2 0>;
+};
-- 
1.9.1

[U-Boot] [PATCH v2 2/3] Odroid: Add eMMC-reset node on DT

[Joonyoung Shim]

This needs for special handling of nRESET_OUT line(GPK1-2 gpio) for eMMC
memory to perform complete reboot on Odroid X2/U3 boards.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
---
 arch/arm/dts/exynos4412-odroid.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index 29ad6ab..c12c599 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -78,4 +78,9 @@
 			reg = <0x125B0000 0x100>;
 		};
 	};
+
+	emmc-reset {
+		compatible = "samsung,emmc-reset";
+		reset-gpio = <&gpk1 2 0>;
+	};
 };
-- 
1.9.1

[U-Boot] [PATCH v2 3/3] Odroid-XU3: Add eMMC-reset node on DT

[Joonyoung Shim]

This needs for special handling of nRESET_OUT line(GPD1-0 gpio) for eMMC
memory to perform complete reboot on Odroid XU3 board.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
---
 arch/arm/dts/exynos5422-odroidxu3.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
index 8f46637..d0a8621 100644
--- a/arch/arm/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -46,4 +46,9 @@
 	mmc at 12220000 {
 		fifoth_val = <0x201f0020>;
 	};
+
+	emmc-reset {
+		compatible = "samsung,emmc-reset";
+		reset-gpio = <&gpd1 0 0>;
+	};
 };
-- 
1.9.1