[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Dmitry Eremin-Solenikov]

PWER settings logically belongs neither to GPIO nor to system IRQ code.
Add special functions to handle PWER (for GPIO and for system IRQs)
from platform code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/generic.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 40e0d86..022e451 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -416,3 +416,24 @@ void sa1110_mb_enable(void)
 	local_irq_restore(flags);
 }
 
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+	if (on)
+		PWER |= BIT(gpio);
+	else
+		PWER &= ~BIT(gpio);
+
+	return 0;
+}
+
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
+{
+	if (BIT(irq) != IC_RTCAlrm)
+		return -EINVAL;
+
+	if (on)
+		PWER |= PWER_RTC;
+	else
+		PWER &= ~PWER_RTC;
+	return 0;
+}
-- 
2.1.4

[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Dmitry Eremin-Solenikov]

PWER settings logically belongs neither to GPIO nor to system IRQ code.
Add special functions to handle PWER (for GPIO and for system IRQs)
from platform code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/generic.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 40e0d86..022e451 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -416,3 +416,24 @@ void sa1110_mb_enable(void)
 	local_irq_restore(flags);
 }
 
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+	if (on)
+		PWER |= BIT(gpio);
+	else
+		PWER &= ~BIT(gpio);
+
+	return 0;
+}
+
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
+{
+	if (BIT(irq) != IC_RTCAlrm)
+		return -EINVAL;
+
+	if (on)
+		PWER |= PWER_RTC;
+	else
+		PWER &= ~PWER_RTC;
+	return 0;
+}
-- 
2.1.4

[PATCH 2/5] ARM: sa1100: use sa11x0_sc_set_wake() in irq driver

[Dmitry Eremin-Solenikov]

Use new function controlling PWER register in IRQ driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/irq.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 65aebfa..7a5aa56 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -40,19 +40,9 @@ static void sa1100_unmask_irq(struct irq_data *d)
 	ICMR |= BIT(d->hwirq);
 }
 
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
 {
-	if (BIT(d->hwirq) == IC_RTCAlrm) {
-		if (on)
-			PWER |= PWER_RTC;
-		else
-			PWER &= ~PWER_RTC;
-		return 0;
-	}
-	return -EINVAL;
+	return sa11x0_sc_set_wake(d->hwirq, on);
 }
 
 static struct irq_chip sa1100_normal_chip = {
-- 
2.1.4

[PATCH 2/5] ARM: sa1100: use sa11x0_sc_set_wake() in irq driver

[Dmitry Eremin-Solenikov]

Use new function controlling PWER register in IRQ driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/irq.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 65aebfa..7a5aa56 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -40,19 +40,9 @@ static void sa1100_unmask_irq(struct irq_data *d)
 	ICMR |= BIT(d->hwirq);
 }
 
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
 {
-	if (BIT(d->hwirq) == IC_RTCAlrm) {
-		if (on)
-			PWER |= PWER_RTC;
-		else
-			PWER &= ~PWER_RTC;
-		return 0;
-	}
-	return -EINVAL;
+	return sa11x0_sc_set_wake(d->hwirq, on);
 }
 
 static struct irq_chip sa1100_normal_chip = {
-- 
2.1.4

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

Use ioremap() and readl/writel_relaxed() to access IRQ controller
registers.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/irq.c | 63 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 7a5aa56..66464fd 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -18,13 +18,20 @@
 #include <linux/ioport.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <asm/mach/irq.h>
 #include <asm/exception.h>
 
 #include "generic.h"
 
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
+
+static void __iomem *iobase;
+static DEFINE_RAW_SPINLOCK(lock);
 
 /*
  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
@@ -32,12 +39,30 @@
  */
 static void sa1100_mask_irq(struct irq_data *d)
 {
-	ICMR &= ~BIT(d->hwirq);
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
 }
 
 static void sa1100_unmask_irq(struct irq_data *d)
 {
-	ICMR |= BIT(d->hwirq);
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
 }
 
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
@@ -85,16 +110,14 @@ static int sa1100irq_suspend(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	st->saved = 1;
-	st->icmr = ICMR;
-	st->iclr = ICLR;
-	st->iccr = ICCR;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
 
 	/*
 	 * Disable all GPIO-based interrupts.
 	 */
-	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-		  IC_GPIO1|IC_GPIO0);
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
 
 	return 0;
 }
@@ -104,10 +127,10 @@ static void sa1100irq_resume(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	if (st->saved) {
-		ICCR = st->iccr;
-		ICLR = st->iclr;
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
 
-		ICMR = st->icmr;
+		writel_relaxed(st->icmr, iobase + ICMR);
 	}
 }
 
@@ -130,8 +153,8 @@ sa1100_handle_irq(struct pt_regs *regs)
 	uint32_t icip, icmr, mask;
 
 	do {
-		icip = (ICIP);
-		icmr = (ICMR);
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
 		mask = icip & icmr;
 
 		if (mask == 0)
@@ -146,17 +169,21 @@ void __init sa1100_init_irq(void)
 {
 	request_resource(&iomem_resource, &irq_resource);
 
+	iobase = ioremap(irq_resource.start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
+
 	/* disable all IRQs */
-	ICMR = 0;
+	writel_relaxed(0, iobase + ICMR);
 
 	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	writel_relaxed(0, iobase + ICLR);
 
 	/*
 	 * Whatever the doc says, this has to be set for the wait-on-irq
 	 * instruction to work... on a SA1100 rev 9 at least.
 	 */
-	ICCR = 1;
+	writel_relaxed(1, iobase + ICCR);
 
 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
 			32, IRQ_GPIO0_SC,
-- 
2.1.4

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

Use ioremap() and readl/writel_relaxed() to access IRQ controller
registers.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/irq.c | 63 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 7a5aa56..66464fd 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -18,13 +18,20 @@
 #include <linux/ioport.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <asm/mach/irq.h>
 #include <asm/exception.h>
 
 #include "generic.h"
 
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
+
+static void __iomem *iobase;
+static DEFINE_RAW_SPINLOCK(lock);
 
 /*
  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
@@ -32,12 +39,30 @@
  */
 static void sa1100_mask_irq(struct irq_data *d)
 {
-	ICMR &= ~BIT(d->hwirq);
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
 }
 
 static void sa1100_unmask_irq(struct irq_data *d)
 {
-	ICMR |= BIT(d->hwirq);
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
 }
 
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
@@ -85,16 +110,14 @@ static int sa1100irq_suspend(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	st->saved = 1;
-	st->icmr = ICMR;
-	st->iclr = ICLR;
-	st->iccr = ICCR;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
 
 	/*
 	 * Disable all GPIO-based interrupts.
 	 */
-	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-		  IC_GPIO1|IC_GPIO0);
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
 
 	return 0;
 }
@@ -104,10 +127,10 @@ static void sa1100irq_resume(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	if (st->saved) {
-		ICCR = st->iccr;
-		ICLR = st->iclr;
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
 
-		ICMR = st->icmr;
+		writel_relaxed(st->icmr, iobase + ICMR);
 	}
 }
 
@@ -130,8 +153,8 @@ sa1100_handle_irq(struct pt_regs *regs)
 	uint32_t icip, icmr, mask;
 
 	do {
-		icip = (ICIP);
-		icmr = (ICMR);
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
 		mask = icip & icmr;
 
 		if (mask == 0)
@@ -146,17 +169,21 @@ void __init sa1100_init_irq(void)
 {
 	request_resource(&iomem_resource, &irq_resource);
 
+	iobase = ioremap(irq_resource.start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
+
 	/* disable all IRQs */
-	ICMR = 0;
+	writel_relaxed(0, iobase + ICMR);
 
 	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	writel_relaxed(0, iobase + ICLR);
 
 	/*
 	 * Whatever the doc says, this has to be set for the wait-on-irq
 	 * instruction to work... on a SA1100 rev 9 at least.
 	 */
-	ICCR = 1;
+	writel_relaxed(1, iobase + ICCR);
 
 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
 			32, IRQ_GPIO0_SC,
-- 
2.1.4

[PATCH 4/5] irqchip: add sa1100 driver

[Dmitry Eremin-Solenikov]

Add an irqchip driver for Intel StrongARM SA-11x0 family of chips. For
now it is just a copy of the current arch/arm/mach-sa1100/irq.c driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 drivers/irqchip/Makefile           |   1 +
 drivers/irqchip/irq-sa11x0.c       | 185 +++++++++++++++++++++++++++++++++++++
 include/linux/irqchip/irq-sa11x0.h |  18 ++++
 3 files changed, 204 insertions(+)
 create mode 100644 drivers/irqchip/irq-sa11x0.c
 create mode 100644 include/linux/irqchip/irq-sa11x0.h

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 9516a32..b0d1dde 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -42,3 +42,4 @@ obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
 obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
 obj-$(CONFIG_MIPS_GIC)			+= irq-mips-gic.o
 obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o
+obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
diff --git a/drivers/irqchip/irq-sa11x0.c b/drivers/irqchip/irq-sa11x0.c
new file mode 100644
index 0000000..c840187
--- /dev/null
+++ b/drivers/irqchip/irq-sa11x0.c
@@ -0,0 +1,185 @@
+/*
+ * drivers/irqchip/irq-sa11x0.c
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * Generic IRQ handling for the SA11x0.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/syscore_ops.h>
+#include <linux/irqchip/irq-sa11x0.h>
+
+#include <asm/exception.h>
+
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
+
+static void __iomem *iobase;
+static DEFINE_RAW_SPINLOCK(lock);
+
+/*
+ * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
+ * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
+ */
+static void sa1100_mask_irq(struct irq_data *d)
+{
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
+}
+
+static void sa1100_unmask_irq(struct irq_data *d)
+{
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
+}
+
+static int sa1100_set_wake(struct irq_data *d, unsigned int on)
+{
+	return sa11x0_sc_set_wake(d->hwirq, on);
+}
+
+static struct irq_chip sa1100_normal_chip = {
+	.name		= "SC",
+	.irq_ack	= sa1100_mask_irq,
+	.irq_mask	= sa1100_mask_irq,
+	.irq_unmask	= sa1100_unmask_irq,
+	.irq_set_wake	= sa1100_set_wake,
+};
+
+static int sa1100_normal_irqdomain_map(struct irq_domain *d,
+		unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &sa1100_normal_chip,
+				 handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
+	.map = sa1100_normal_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_normal_irqdomain;
+
+static struct sa1100irq_state {
+	unsigned int	saved;
+	unsigned int	icmr;
+	unsigned int	iclr;
+	unsigned int	iccr;
+} sa1100irq_state;
+
+static int sa1100irq_suspend(void)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	st->saved = 1;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
+
+	/*
+	 * Disable all GPIO-based interrupts.
+	 */
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
+
+	return 0;
+}
+
+static void sa1100irq_resume(void)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	if (st->saved) {
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
+
+		writel_relaxed(st->icmr, iobase + ICMR);
+	}
+}
+
+static struct syscore_ops sa1100irq_syscore_ops = {
+	.suspend	= sa1100irq_suspend,
+	.resume		= sa1100irq_resume,
+};
+
+static int __init sa1100irq_init_devicefs(void)
+{
+	register_syscore_ops(&sa1100irq_syscore_ops);
+	return 0;
+}
+
+device_initcall(sa1100irq_init_devicefs);
+
+static asmlinkage void __exception_irq_entry
+sa1100_handle_irq(struct pt_regs *regs)
+{
+	uint32_t icip, icmr, mask;
+
+	do {
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
+		mask = icip & icmr;
+
+		if (mask == 0)
+			break;
+
+		handle_domain_irq(sa1100_normal_irqdomain,
+				ffs(mask) - 1, regs);
+	} while (1);
+}
+
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
+{
+	iobase = ioremap(io_start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
+
+	/* disable all IRQs */
+	writel_relaxed(0, iobase + ICMR);
+
+	/* all IRQs are IRQ, not FIQ */
+	writel_relaxed(0, iobase + ICLR);
+
+	/*
+	 * Whatever the doc says, this has to be set for the wait-on-irq
+	 * instruction to work... on a SA1100 rev 9 at least.
+	 */
+	writel_relaxed(1, iobase + ICCR);
+
+	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
+			32, irq_start,
+			&sa1100_normal_irqdomain_ops, NULL);
+
+	set_handle_irq(sa1100_handle_irq);
+}
diff --git a/include/linux/irqchip/irq-sa11x0.h b/include/linux/irqchip/irq-sa11x0.h
new file mode 100644
index 0000000..38ebe2f
--- /dev/null
+++ b/include/linux/irqchip/irq-sa11x0.h
@@ -0,0 +1,18 @@
+/*
+ * Generic IRQ handling for the SA11x0.
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+#define __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start);
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
+
+#endif
-- 
2.1.4

[PATCH 4/5] irqchip: add sa1100 driver

[Dmitry Eremin-Solenikov]

Add an irqchip driver for Intel StrongARM SA-11x0 family of chips. For
now it is just a copy of the current arch/arm/mach-sa1100/irq.c driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 drivers/irqchip/Makefile           |   1 +
 drivers/irqchip/irq-sa11x0.c       | 185 +++++++++++++++++++++++++++++++++++++
 include/linux/irqchip/irq-sa11x0.h |  18 ++++
 3 files changed, 204 insertions(+)
 create mode 100644 drivers/irqchip/irq-sa11x0.c
 create mode 100644 include/linux/irqchip/irq-sa11x0.h

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 9516a32..b0d1dde 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -42,3 +42,4 @@ obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
 obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
 obj-$(CONFIG_MIPS_GIC)			+= irq-mips-gic.o
 obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o
+obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
diff --git a/drivers/irqchip/irq-sa11x0.c b/drivers/irqchip/irq-sa11x0.c
new file mode 100644
index 0000000..c840187
--- /dev/null
+++ b/drivers/irqchip/irq-sa11x0.c
@@ -0,0 +1,185 @@
+/*
+ * drivers/irqchip/irq-sa11x0.c
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * Generic IRQ handling for the SA11x0.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/syscore_ops.h>
+#include <linux/irqchip/irq-sa11x0.h>
+
+#include <asm/exception.h>
+
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
+
+static void __iomem *iobase;
+static DEFINE_RAW_SPINLOCK(lock);
+
+/*
+ * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
+ * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
+ */
+static void sa1100_mask_irq(struct irq_data *d)
+{
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
+}
+
+static void sa1100_unmask_irq(struct irq_data *d)
+{
+	u32 reg;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&lock, flags);
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
+
+	raw_spin_unlock_irqrestore(&lock, flags);
+}
+
+static int sa1100_set_wake(struct irq_data *d, unsigned int on)
+{
+	return sa11x0_sc_set_wake(d->hwirq, on);
+}
+
+static struct irq_chip sa1100_normal_chip = {
+	.name		= "SC",
+	.irq_ack	= sa1100_mask_irq,
+	.irq_mask	= sa1100_mask_irq,
+	.irq_unmask	= sa1100_unmask_irq,
+	.irq_set_wake	= sa1100_set_wake,
+};
+
+static int sa1100_normal_irqdomain_map(struct irq_domain *d,
+		unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &sa1100_normal_chip,
+				 handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
+	.map = sa1100_normal_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_normal_irqdomain;
+
+static struct sa1100irq_state {
+	unsigned int	saved;
+	unsigned int	icmr;
+	unsigned int	iclr;
+	unsigned int	iccr;
+} sa1100irq_state;
+
+static int sa1100irq_suspend(void)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	st->saved = 1;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
+
+	/*
+	 * Disable all GPIO-based interrupts.
+	 */
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
+
+	return 0;
+}
+
+static void sa1100irq_resume(void)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	if (st->saved) {
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
+
+		writel_relaxed(st->icmr, iobase + ICMR);
+	}
+}
+
+static struct syscore_ops sa1100irq_syscore_ops = {
+	.suspend	= sa1100irq_suspend,
+	.resume		= sa1100irq_resume,
+};
+
+static int __init sa1100irq_init_devicefs(void)
+{
+	register_syscore_ops(&sa1100irq_syscore_ops);
+	return 0;
+}
+
+device_initcall(sa1100irq_init_devicefs);
+
+static asmlinkage void __exception_irq_entry
+sa1100_handle_irq(struct pt_regs *regs)
+{
+	uint32_t icip, icmr, mask;
+
+	do {
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
+		mask = icip & icmr;
+
+		if (mask == 0)
+			break;
+
+		handle_domain_irq(sa1100_normal_irqdomain,
+				ffs(mask) - 1, regs);
+	} while (1);
+}
+
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
+{
+	iobase = ioremap(io_start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
+
+	/* disable all IRQs */
+	writel_relaxed(0, iobase + ICMR);
+
+	/* all IRQs are IRQ, not FIQ */
+	writel_relaxed(0, iobase + ICLR);
+
+	/*
+	 * Whatever the doc says, this has to be set for the wait-on-irq
+	 * instruction to work... on a SA1100 rev 9 at least.
+	 */
+	writel_relaxed(1, iobase + ICCR);
+
+	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
+			32, irq_start,
+			&sa1100_normal_irqdomain_ops, NULL);
+
+	set_handle_irq(sa1100_handle_irq);
+}
diff --git a/include/linux/irqchip/irq-sa11x0.h b/include/linux/irqchip/irq-sa11x0.h
new file mode 100644
index 0000000..38ebe2f
--- /dev/null
+++ b/include/linux/irqchip/irq-sa11x0.h
@@ -0,0 +1,18 @@
+/*
+ * Generic IRQ handling for the SA11x0.
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+#define __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start);
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
+
+#endif
-- 
2.1.4

[PATCH 5/5] ARM: sa1100: drop irq driver

[Dmitry Eremin-Solenikov]

Drop irq driver for sa1100 in favour of irqchip driver replacement.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/Makefile  |   2 +-
 arch/arm/mach-sa1100/generic.c |  13 +++
 arch/arm/mach-sa1100/irq.c     | 195 -----------------------------------------
 3 files changed, 14 insertions(+), 196 deletions(-)
 delete mode 100644 arch/arm/mach-sa1100/irq.c

diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 61ff91e..ebc4d58 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o #nmi-oopser.o
+obj-y := clock.o generic.o #nmi-oopser.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 022e451..3fdc16b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/irqchip/irq-sa11x0.h>
 
 #include <video/sa1100fb.h>
 
@@ -375,6 +376,18 @@ void __init sa1100_timer_init(void)
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
 }
 
+static struct resource irq_resource =
+	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
+
+void __init sa1100_init_irq(void)
+{
+	request_resource(&iomem_resource, &irq_resource);
+
+	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
+
+	sa1100_init_gpio();
+}
+
 /*
  * Disable the memory bus request/grant signals on the SA1110 to
  * ensure that we don't receive spurious memory requests.  We set
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
deleted file mode 100644
index 66464fd..0000000
--- a/arch/arm/mach-sa1100/irq.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/irq.c
- *
- * Copyright (C) 1999-2001 Nicolas Pitre
- *
- * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/irqs.h>
-#include <asm/exception.h>
-
-#include "generic.h"
-
-#define ICIP	0x00  /* IC IRQ Pending reg. */
-#define ICMR	0x04  /* IC Mask Reg.        */
-#define ICLR	0x08  /* IC Level Reg.       */
-#define ICCR	0x0C  /* IC Control Reg.     */
-#define ICFP	0x10  /* IC FIQ Pending reg. */
-#define ICPR	0x20  /* IC Pending Reg.     */
-
-static void __iomem *iobase;
-static DEFINE_RAW_SPINLOCK(lock);
-
-/*
- * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
- * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
- */
-static void sa1100_mask_irq(struct irq_data *d)
-{
-	u32 reg;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&lock, flags);
-
-	reg = readl_relaxed(iobase + ICMR);
-	reg &= ~BIT(d->hwirq);
-	writel_relaxed(reg, iobase + ICMR);
-
-	raw_spin_unlock_irqrestore(&lock, flags);
-}
-
-static void sa1100_unmask_irq(struct irq_data *d)
-{
-	u32 reg;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&lock, flags);
-
-	reg = readl_relaxed(iobase + ICMR);
-	reg |= BIT(d->hwirq);
-	writel_relaxed(reg, iobase + ICMR);
-
-	raw_spin_unlock_irqrestore(&lock, flags);
-}
-
-static int sa1100_set_wake(struct irq_data *d, unsigned int on)
-{
-	return sa11x0_sc_set_wake(d->hwirq, on);
-}
-
-static struct irq_chip sa1100_normal_chip = {
-	.name		= "SC",
-	.irq_ack	= sa1100_mask_irq,
-	.irq_mask	= sa1100_mask_irq,
-	.irq_unmask	= sa1100_unmask_irq,
-	.irq_set_wake	= sa1100_set_wake,
-};
-
-static int sa1100_normal_irqdomain_map(struct irq_domain *d,
-		unsigned int irq, irq_hw_number_t hwirq)
-{
-	irq_set_chip_and_handler(irq, &sa1100_normal_chip,
-				 handle_level_irq);
-	set_irq_flags(irq, IRQF_VALID);
-
-	return 0;
-}
-
-static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
-	.map = sa1100_normal_irqdomain_map,
-	.xlate = irq_domain_xlate_onetwocell,
-};
-
-static struct irq_domain *sa1100_normal_irqdomain;
-
-static struct resource irq_resource =
-	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
-
-static struct sa1100irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} sa1100irq_state;
-
-static int sa1100irq_suspend(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	st->saved = 1;
-	st->icmr = readl_relaxed(iobase + ICMR);
-	st->iclr = readl_relaxed(iobase + ICLR);
-	st->iccr = readl_relaxed(iobase + ICCR);
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
-
-	return 0;
-}
-
-static void sa1100irq_resume(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	if (st->saved) {
-		writel_relaxed(st->iccr, iobase + ICCR);
-		writel_relaxed(st->iclr, iobase + ICLR);
-
-		writel_relaxed(st->icmr, iobase + ICMR);
-	}
-}
-
-static struct syscore_ops sa1100irq_syscore_ops = {
-	.suspend	= sa1100irq_suspend,
-	.resume		= sa1100irq_resume,
-};
-
-static int __init sa1100irq_init_devicefs(void)
-{
-	register_syscore_ops(&sa1100irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(sa1100irq_init_devicefs);
-
-static asmlinkage void __exception_irq_entry
-sa1100_handle_irq(struct pt_regs *regs)
-{
-	uint32_t icip, icmr, mask;
-
-	do {
-		icip = readl_relaxed(iobase + ICIP);
-		icmr = readl_relaxed(iobase + ICMR);
-		mask = icip & icmr;
-
-		if (mask == 0)
-			break;
-
-		handle_domain_irq(sa1100_normal_irqdomain,
-				ffs(mask) - 1, regs);
-	} while (1);
-}
-
-void __init sa1100_init_irq(void)
-{
-	request_resource(&iomem_resource, &irq_resource);
-
-	iobase = ioremap(irq_resource.start, SZ_64K);
-	if (WARN_ON(!iobase))
-		return;
-
-	/* disable all IRQs */
-	writel_relaxed(0, iobase + ICMR);
-
-	/* all IRQs are IRQ, not FIQ */
-	writel_relaxed(0, iobase + ICLR);
-
-	/*
-	 * Whatever the doc says, this has to be set for the wait-on-irq
-	 * instruction to work... on a SA1100 rev 9 at least.
-	 */
-	writel_relaxed(1, iobase + ICCR);
-
-	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
-			32, IRQ_GPIO0_SC,
-			&sa1100_normal_irqdomain_ops, NULL);
-
-	set_handle_irq(sa1100_handle_irq);
-
-	sa1100_init_gpio();
-}
-- 
2.1.4

[PATCH 5/5] ARM: sa1100: drop irq driver

[Dmitry Eremin-Solenikov]

Drop irq driver for sa1100 in favour of irqchip driver replacement.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/Makefile  |   2 +-
 arch/arm/mach-sa1100/generic.c |  13 +++
 arch/arm/mach-sa1100/irq.c     | 195 -----------------------------------------
 3 files changed, 14 insertions(+), 196 deletions(-)
 delete mode 100644 arch/arm/mach-sa1100/irq.c

diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 61ff91e..ebc4d58 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o #nmi-oopser.o
+obj-y := clock.o generic.o #nmi-oopser.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 022e451..3fdc16b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/irqchip/irq-sa11x0.h>
 
 #include <video/sa1100fb.h>
 
@@ -375,6 +376,18 @@ void __init sa1100_timer_init(void)
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
 }
 
+static struct resource irq_resource =
+	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
+
+void __init sa1100_init_irq(void)
+{
+	request_resource(&iomem_resource, &irq_resource);
+
+	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
+
+	sa1100_init_gpio();
+}
+
 /*
  * Disable the memory bus request/grant signals on the SA1110 to
  * ensure that we don't receive spurious memory requests.  We set
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
deleted file mode 100644
index 66464fd..0000000
--- a/arch/arm/mach-sa1100/irq.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/irq.c
- *
- * Copyright (C) 1999-2001 Nicolas Pitre
- *
- * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/irqs.h>
-#include <asm/exception.h>
-
-#include "generic.h"
-
-#define ICIP	0x00  /* IC IRQ Pending reg. */
-#define ICMR	0x04  /* IC Mask Reg.        */
-#define ICLR	0x08  /* IC Level Reg.       */
-#define ICCR	0x0C  /* IC Control Reg.     */
-#define ICFP	0x10  /* IC FIQ Pending reg. */
-#define ICPR	0x20  /* IC Pending Reg.     */
-
-static void __iomem *iobase;
-static DEFINE_RAW_SPINLOCK(lock);
-
-/*
- * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
- * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
- */
-static void sa1100_mask_irq(struct irq_data *d)
-{
-	u32 reg;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&lock, flags);
-
-	reg = readl_relaxed(iobase + ICMR);
-	reg &= ~BIT(d->hwirq);
-	writel_relaxed(reg, iobase + ICMR);
-
-	raw_spin_unlock_irqrestore(&lock, flags);
-}
-
-static void sa1100_unmask_irq(struct irq_data *d)
-{
-	u32 reg;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&lock, flags);
-
-	reg = readl_relaxed(iobase + ICMR);
-	reg |= BIT(d->hwirq);
-	writel_relaxed(reg, iobase + ICMR);
-
-	raw_spin_unlock_irqrestore(&lock, flags);
-}
-
-static int sa1100_set_wake(struct irq_data *d, unsigned int on)
-{
-	return sa11x0_sc_set_wake(d->hwirq, on);
-}
-
-static struct irq_chip sa1100_normal_chip = {
-	.name		= "SC",
-	.irq_ack	= sa1100_mask_irq,
-	.irq_mask	= sa1100_mask_irq,
-	.irq_unmask	= sa1100_unmask_irq,
-	.irq_set_wake	= sa1100_set_wake,
-};
-
-static int sa1100_normal_irqdomain_map(struct irq_domain *d,
-		unsigned int irq, irq_hw_number_t hwirq)
-{
-	irq_set_chip_and_handler(irq, &sa1100_normal_chip,
-				 handle_level_irq);
-	set_irq_flags(irq, IRQF_VALID);
-
-	return 0;
-}
-
-static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
-	.map = sa1100_normal_irqdomain_map,
-	.xlate = irq_domain_xlate_onetwocell,
-};
-
-static struct irq_domain *sa1100_normal_irqdomain;
-
-static struct resource irq_resource =
-	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
-
-static struct sa1100irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} sa1100irq_state;
-
-static int sa1100irq_suspend(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	st->saved = 1;
-	st->icmr = readl_relaxed(iobase + ICMR);
-	st->iclr = readl_relaxed(iobase + ICLR);
-	st->iccr = readl_relaxed(iobase + ICCR);
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
-
-	return 0;
-}
-
-static void sa1100irq_resume(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	if (st->saved) {
-		writel_relaxed(st->iccr, iobase + ICCR);
-		writel_relaxed(st->iclr, iobase + ICLR);
-
-		writel_relaxed(st->icmr, iobase + ICMR);
-	}
-}
-
-static struct syscore_ops sa1100irq_syscore_ops = {
-	.suspend	= sa1100irq_suspend,
-	.resume		= sa1100irq_resume,
-};
-
-static int __init sa1100irq_init_devicefs(void)
-{
-	register_syscore_ops(&sa1100irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(sa1100irq_init_devicefs);
-
-static asmlinkage void __exception_irq_entry
-sa1100_handle_irq(struct pt_regs *regs)
-{
-	uint32_t icip, icmr, mask;
-
-	do {
-		icip = readl_relaxed(iobase + ICIP);
-		icmr = readl_relaxed(iobase + ICMR);
-		mask = icip & icmr;
-
-		if (mask == 0)
-			break;
-
-		handle_domain_irq(sa1100_normal_irqdomain,
-				ffs(mask) - 1, regs);
-	} while (1);
-}
-
-void __init sa1100_init_irq(void)
-{
-	request_resource(&iomem_resource, &irq_resource);
-
-	iobase = ioremap(irq_resource.start, SZ_64K);
-	if (WARN_ON(!iobase))
-		return;
-
-	/* disable all IRQs */
-	writel_relaxed(0, iobase + ICMR);
-
-	/* all IRQs are IRQ, not FIQ */
-	writel_relaxed(0, iobase + ICLR);
-
-	/*
-	 * Whatever the doc says, this has to be set for the wait-on-irq
-	 * instruction to work... on a SA1100 rev 9 at least.
-	 */
-	writel_relaxed(1, iobase + ICCR);
-
-	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
-			32, IRQ_GPIO0_SC,
-			&sa1100_normal_irqdomain_ops, NULL);
-
-	set_handle_irq(sa1100_handle_irq);
-
-	sa1100_init_gpio();
-}
-- 
2.1.4

Re: [PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Linus Walleij]

On Thu, Jan 15, 2015 at 11:09 AM, Dmitry Eremin-Solenikov
<dbaryshkov@gmail.com> wrote:

> PWER settings logically belongs neither to GPIO nor to system IRQ code.
> Add special functions to handle PWER (for GPIO and for system IRQs)
> from platform code.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

> diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
(...)
> +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
(...)
> +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)

Why are these two functions not added to any .h file?

Did you miss to commit something or are there compile
warnings about this?

Yours,
Linus Walleij

[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Linus Walleij]

On Thu, Jan 15, 2015 at 11:09 AM, Dmitry Eremin-Solenikov
<dbaryshkov@gmail.com> wrote:

> PWER settings logically belongs neither to GPIO nor to system IRQ code.
> Add special functions to handle PWER (for GPIO and for system IRQs)
> from platform code.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

> diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
(...)
> +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
(...)
> +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)

Why are these two functions not added to any .h file?

Did you miss to commit something or are there compile
warnings about this?

Yours,
Linus Walleij

Re: [PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Dmitry Eremin-Solenikov]

Hello,

2015-01-21 13:05 GMT+03:00 Linus Walleij <linus.walleij@linaro.org>:
>
> On Thu, Jan 15, 2015 at 11:09 AM, Dmitry Eremin-Solenikov
> <dbaryshkov@gmail.com> wrote:
>
> > PWER settings logically belongs neither to GPIO nor to system IRQ code.
> > Add special functions to handle PWER (for GPIO and for system IRQs)
> > from platform code.
> >
> > Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
>
> > diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
> (...)
> > +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
> (...)
> > +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
>
> Why are these two functions not added to any .h file?
>
> Did you miss to commit something or are there compile
> warnings about this?

I thought quite a while about adding them to any header. In the end I ended
adding them to the irqchip header file. PWER handling is (a bit) related to IRQ
handling. The only other user of those functions would be a gpio (or pinctrl
if it ends that way) driver.

-- 
With best wishes
Dmitry

[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Dmitry Eremin-Solenikov]

Hello,

2015-01-21 13:05 GMT+03:00 Linus Walleij <linus.walleij@linaro.org>:
>
> On Thu, Jan 15, 2015 at 11:09 AM, Dmitry Eremin-Solenikov
> <dbaryshkov@gmail.com> wrote:
>
> > PWER settings logically belongs neither to GPIO nor to system IRQ code.
> > Add special functions to handle PWER (for GPIO and for system IRQs)
> > from platform code.
> >
> > Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
>
> > diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
> (...)
> > +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
> (...)
> > +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
>
> Why are these two functions not added to any .h file?
>
> Did you miss to commit something or are there compile
> warnings about this?

I thought quite a while about adding them to any header. In the end I ended
adding them to the irqchip header file. PWER handling is (a bit) related to IRQ
handling. The only other user of those functions would be a gpio (or pinctrl
if it ends that way) driver.

-- 
With best wishes
Dmitry

Re: [PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Thomas Gleixner]

On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>  static void sa1100_mask_irq(struct irq_data *d)
>  {
> -	ICMR &= ~BIT(d->hwirq);
> +	u32 reg;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&lock, flags);

What's the exact point of that lock? And how is it related to the
$subject of the patch?

Thanks,

	tglx

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Thomas Gleixner]

On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>  static void sa1100_mask_irq(struct irq_data *d)
>  {
> -	ICMR &= ~BIT(d->hwirq);
> +	u32 reg;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&lock, flags);

What's the exact point of that lock? And how is it related to the
$subject of the patch?

Thanks,

	tglx

Re: [PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>>  static void sa1100_mask_irq(struct irq_data *d)
>>  {
>> -     ICMR &= ~BIT(d->hwirq);
>> +     u32 reg;
>> +     unsigned long flags;
>> +
>> +     raw_spin_lock_irqsave(&lock, flags);
>
> What's the exact point of that lock? And how is it related to the
> $subject of the patch?

It is needed to protect ICMR register during RMW cycle, isn't it?
I might have missed locks around ack/mask/unmask calls from irq
core. If so, I can happily drop this spinlock.

-- 
With best wishes
Dmitry

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>>  static void sa1100_mask_irq(struct irq_data *d)
>>  {
>> -     ICMR &= ~BIT(d->hwirq);
>> +     u32 reg;
>> +     unsigned long flags;
>> +
>> +     raw_spin_lock_irqsave(&lock, flags);
>
> What's the exact point of that lock? And how is it related to the
> $subject of the patch?

It is needed to protect ICMR register during RMW cycle, isn't it?
I might have missed locks around ack/mask/unmask calls from irq
core. If so, I can happily drop this spinlock.

-- 
With best wishes
Dmitry

Re: [PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Thomas Gleixner]

On Sat, 24 Jan 2015, Dmitry Eremin-Solenikov wrote:

> 2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> > On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
> >>  static void sa1100_mask_irq(struct irq_data *d)
> >>  {
> >> -     ICMR &= ~BIT(d->hwirq);
> >> +     u32 reg;
> >> +     unsigned long flags;
> >> +
> >> +     raw_spin_lock_irqsave(&lock, flags);
> >
> > What's the exact point of that lock? And how is it related to the
> > $subject of the patch?
> 
> It is needed to protect ICMR register during RMW cycle, isn't it?

The original code has no protection for the RMW either.

And there is a simple reason for this. These functions are guaranteed
to be called with interrupts disabled and this is a uniprocessor
machine and it will never grow SMP support. So interrupts disabled is
serialization enough.

Thanks,

	tglx

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Thomas Gleixner]

On Sat, 24 Jan 2015, Dmitry Eremin-Solenikov wrote:

> 2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> > On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
> >>  static void sa1100_mask_irq(struct irq_data *d)
> >>  {
> >> -     ICMR &= ~BIT(d->hwirq);
> >> +     u32 reg;
> >> +     unsigned long flags;
> >> +
> >> +     raw_spin_lock_irqsave(&lock, flags);
> >
> > What's the exact point of that lock? And how is it related to the
> > $subject of the patch?
> 
> It is needed to protect ICMR register during RMW cycle, isn't it?

The original code has no protection for the RMW either.

And there is a simple reason for this. These functions are guaranteed
to be called with interrupts disabled and this is a uniprocessor
machine and it will never grow SMP support. So interrupts disabled is
serialization enough.

Thanks,

	tglx

Re: [PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

2015-01-24 22:24 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> On Sat, 24 Jan 2015, Dmitry Eremin-Solenikov wrote:
>
>> 2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
>> > On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>> >>  static void sa1100_mask_irq(struct irq_data *d)
>> >>  {
>> >> -     ICMR &= ~BIT(d->hwirq);
>> >> +     u32 reg;
>> >> +     unsigned long flags;
>> >> +
>> >> +     raw_spin_lock_irqsave(&lock, flags);
>> >
>> > What's the exact point of that lock? And how is it related to the
>> > $subject of the patch?
>>
>> It is needed to protect ICMR register during RMW cycle, isn't it?
>
> The original code has no protection for the RMW either.
>
> And there is a simple reason for this. These functions are guaranteed
> to be called with interrupts disabled and this is a uniprocessor
> machine and it will never grow SMP support. So interrupts disabled is
> serialization enough.

OK, thanks for pointing. I'll update the patchset in a few days.

-- 
With best wishes
Dmitry

[PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers

[Dmitry Eremin-Solenikov]

2015-01-24 22:24 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
> On Sat, 24 Jan 2015, Dmitry Eremin-Solenikov wrote:
>
>> 2015-01-24 20:48 GMT+03:00 Thomas Gleixner <tglx@linutronix.de>:
>> > On Thu, 15 Jan 2015, Dmitry Eremin-Solenikov wrote:
>> >>  static void sa1100_mask_irq(struct irq_data *d)
>> >>  {
>> >> -     ICMR &= ~BIT(d->hwirq);
>> >> +     u32 reg;
>> >> +     unsigned long flags;
>> >> +
>> >> +     raw_spin_lock_irqsave(&lock, flags);
>> >
>> > What's the exact point of that lock? And how is it related to the
>> > $subject of the patch?
>>
>> It is needed to protect ICMR register during RMW cycle, isn't it?
>
> The original code has no protection for the RMW either.
>
> And there is a simple reason for this. These functions are guaranteed
> to be called with interrupts disabled and this is a uniprocessor
> machine and it will never grow SMP support. So interrupts disabled is
> serialization enough.

OK, thanks for pointing. I'll update the patchset in a few days.

-- 
With best wishes
Dmitry

[PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Dmitry Eremin-Solenikov]

PWER settings logically belongs neither to GPIO nor to system IRQ code.
Add special functions to handle PWER (for GPIO and for system IRQs)
from platform code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/arm/mach-sa1100/generic.c | 24 ++++++++++++++++++++++++
 include/soc/sa1100/pwer.h      | 15 +++++++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 include/soc/sa1100/pwer.h

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 40e0d86..c651f6e 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -23,6 +23,8 @@
 
 #include <video/sa1100fb.h>
 
+#include <soc/sa1100/pwer.h>
+
 #include <asm/div64.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
@@ -416,3 +418,25 @@ void sa1110_mb_enable(void)
 	local_irq_restore(flags);
 }
 
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+	if (on)
+		PWER |= BIT(gpio);
+	else
+		PWER &= ~BIT(gpio);
+
+	return 0;
+}
+
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
+{
+	if (BIT(irq) != IC_RTCAlrm)
+		return -EINVAL;
+
+	if (on)
+		PWER |= PWER_RTC;
+	else
+		PWER &= ~PWER_RTC;
+
+	return 0;
+}
diff --git a/include/soc/sa1100/pwer.h b/include/soc/sa1100/pwer.h
new file mode 100644
index 0000000..15a545b
--- /dev/null
+++ b/include/soc/sa1100/pwer.h
@@ -0,0 +1,15 @@
+#ifndef SOC_SA1100_PWER_H
+#define SOC_SA1100_PWER_H
+
+/*
+ * Copyright (C) 2015, Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
+
+#endif
-- 
2.1.4