From: Geert Uytterhoeven <geert+renesas@glider.be> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/9] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC Date: Tue, 20 Jan 2015 12:51:43 +0000 [thread overview] Message-ID: <1421758306-24838-7-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1421758306-24838-1-git-send-email-geert+renesas@glider.be> Move the Ethernet node from the ad-hoc lbsc node to the BSC node, as its connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> --- v3: - Add Tested-by, v2: - New. --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 0d50bef0123449f5..44c4cac1820a4dfe 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -72,26 +72,6 @@ regulator-always-on; }; - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - - ethernet@8000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_1v8>; - }; - }; - leds { compatible = "gpio-leds"; led1 { @@ -184,6 +164,21 @@ voltage-tolerance = <1>; /* 1% */ }; +&bsc { + ethernet@8000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; +}; + &cmt1 { status = "okay"; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: geert+renesas@glider.be (Geert Uytterhoeven) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/9] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC Date: Tue, 20 Jan 2015 13:51:43 +0100 [thread overview] Message-ID: <1421758306-24838-7-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1421758306-24838-1-git-send-email-geert+renesas@glider.be> Move the Ethernet node from the ad-hoc lbsc node to the BSC node, as its connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> --- v3: - Add Tested-by, v2: - New. --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 0d50bef0123449f5..44c4cac1820a4dfe 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -72,26 +72,6 @@ regulator-always-on; }; - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - - ethernet at 8000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_1v8>; - }; - }; - leds { compatible = "gpio-leds"; led1 { @@ -184,6 +164,21 @@ voltage-tolerance = <1>; /* 1% */ }; +&bsc { + ethernet at 8000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; +}; + &cmt1 { status = "okay"; }; -- 1.9.1
next prev parent reply other threads:[~2015-01-20 12:51 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-20 12:51 [PATCH 0/9] ARM: shmobile: r8a73a4/ape6evm multiplatform Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 1/9] ARM: shmobile: r8a73a4: Add CPG register bits header Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 2/9] ARM: shmobile: r8a73a4: Common clock framework DT description Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 3/9] ARM: shmobile: ape6evm: Disable legacy clock initialization Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 4/9] ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 5/9] ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 13:04 ` Laurent Pinchart 2015-01-20 13:04 ` Laurent Pinchart 2015-01-20 12:51 ` Geert Uytterhoeven [this message] 2015-01-20 12:51 ` [PATCH 6/9] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC Geert Uytterhoeven 2015-01-20 13:01 ` Laurent Pinchart 2015-01-20 13:01 ` Laurent Pinchart 2015-01-20 12:51 ` [PATCH 7/9] ARM: shmobile: ape6evm-reference: Remove board C code and DT file Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 8/9] ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-20 12:51 ` [PATCH 9/9] ARM: shmobile: r8a73a4: Remove legacy code Geert Uytterhoeven 2015-01-20 12:51 ` Geert Uytterhoeven 2015-01-21 1:59 ` [PATCH 0/9] ARM: shmobile: r8a73a4/ape6evm multiplatform Simon Horman 2015-01-21 1:59 ` Simon Horman 2015-01-22 3:39 ` Simon Horman 2015-01-22 3:39 ` Simon Horman 2015-01-23 4:23 ` Simon Horman 2015-01-23 4:23 ` Simon Horman 2015-01-23 10:00 ` Geert Uytterhoeven 2015-01-23 10:00 ` Geert Uytterhoeven 2015-01-23 12:26 ` Laurent Pinchart 2015-01-23 12:26 ` Laurent Pinchart 2015-01-23 12:41 ` Geert Uytterhoeven 2015-01-23 12:41 ` Geert Uytterhoeven 2015-01-24 7:55 ` Simon Horman 2015-01-24 7:55 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421758306-24838-7-git-send-email-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.