[net-next 00/15][pull request] Intel Wired LAN Driver Updates 2015-01-22

[net-next 00/15][pull request] Intel Wired LAN Driver Updates 2015-01-22

[Jeff Kirsher]

This series contains updates to e1000, e1000e, igb, fm10k and virtio_net.

Asaf Vertz provides a fix for e1000 to future-proof the time comparisons
by using time_after_eq() instead of plain math.

Mathias Koehrer provides a fix for e1000e to add a check to e1000_xmit_frame()
to ensure a work queue will not be scheduled that has not been initialized.

Jacob adds the use of software timestamping via the virtio_net driver.

Alex Duyck cleans up page reuse code in igb and fm10k.  Cleans up the
page reuse code from getting into a state where all the workarounds
needed are in place as well as cleaning up oversights, such as using
__free_pages instead of put_page to drop a locally allocated page.

Richard Cochran provides 4 patches for igb dealing with time sync.
First provides a helper function since the code that handles the time
sync interrupt is repeated in three different places.  Then serializes
the access to the time sync interrupt since the registers may be
manipulated from different contexts.  Enables the use of i210 device
interrupt to generate an internal PPS event for adjusting the kernel
system time.  The i210 device offers a number of special PTP hardware
clock features on the Software Defined Pins (SDPs), so added support for
two of the possible functions (time stamping external events and
periodic output signals).

Or Gerlitz fixes fm10k from double setting of NETIF_F_SG since the
networking core does it for the driver during registration time.

Joe Stringer adds support for up to 104 bytes of inner+outer headers in
fm10k and adds an initial check to fail encapsulation offload if these
are too large.

Matthew increases the timeout for the data path reset based on feedback
from the hardware team, since 100us is too short of a time to wait for
the data path reset to complete.

Alexander Graf provides a fix for igb to indicate failure on VF reset
for an empty MAC address, to mirror the behavior of ixgbe.

Florian Westphal updates e1000 and e1000e to support txtd update delay
via xmit_more, this way we won't update the Tx tail descriptor if the
queue has not been stopped and we know at least one more skb will be
sent right away.

The following are changes since commit 0c49087462e8587c12ecfeaf1dd46fdc0ddc4532:
  Merge tag 'mac80211-next-for-davem-2015-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Duyck (2):
  igb: Clean-up page reuse code
  fm10k: Clean-up page reuse code

Alexander Graf (1):
  igb: Indicate failure on vf reset for empty mac address

Asaf Vertz (1):
  e1000: fix time comparison

Florian Westphal (2):
  net: e1000: support txtd update delay via xmit_more
  net: e1000e: support txtd update delay via xmit_more

Jacob Keller (1):
  virtio_net: add software timestamp support

Joe Stringer (1):
  fm10k: Check tunnel header length in encap offload

Mathias Koehrer (1):
  e1000e: Fix 82572EI that has no hardware timestamp support

Matthew Vick (1):
  fm10k: Increase the timeout for the data path reset

Or Gerlitz (1):
  net/fm10k: Avoid double setting of NETIF_F_SG for the HW encapsulation
    feature mask

Richard Cochran (4):
  igb: refactor time sync interrupt handling
  igb: serialize access to the time sync interrupt registers
  igb: enable internal PPS for the i210
  igb: enable auxiliary PHC functions for the i210

 drivers/net/ethernet/intel/e1000/e1000_ethtool.c |   3 +-
 drivers/net/ethernet/intel/e1000/e1000_main.c    |  15 +-
 drivers/net/ethernet/intel/e1000e/netdev.c       |  30 +--
 drivers/net/ethernet/intel/fm10k/fm10k_main.c    |  40 ++--
 drivers/net/ethernet/intel/fm10k/fm10k_netdev.c  |  13 +-
 drivers/net/ethernet/intel/fm10k/fm10k_type.h    |   2 +-
 drivers/net/ethernet/intel/igb/igb.h             |   9 +
 drivers/net/ethernet/intel/igb/igb_main.c        | 153 +++++++++-----
 drivers/net/ethernet/intel/igb/igb_ptp.c         | 256 ++++++++++++++++++++++-
 drivers/net/virtio_net.c                         |   4 +
 10 files changed, 424 insertions(+), 101 deletions(-)

-- 
1.9.3

[net-next 01/15] e1000: fix time comparison

[Jeff Kirsher]

From: Asaf Vertz <asaf.vertz@tandemg.com>

To be future-proof and for better readability the time comparisons are
modified to use time_after_eq() instead of plain, error-prone math.

Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index b691eb4..4270ad2 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -24,6 +24,7 @@
 /* ethtool support for e1000 */
 
 #include "e1000.h"
+#include <linux/jiffies.h>
 #include <linux/uaccess.h>
 
 enum {NETDEV_STATS, E1000_STATS};
@@ -1460,7 +1461,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 			ret_val = 13; /* ret_val is the same as mis-compare */
 			break;
 		}
-		if (jiffies >= (time + 2)) {
+		if (time_after_eq(jiffies, time + 2)) {
 			ret_val = 14; /* error code for time out error */
 			break;
 		}
-- 
1.9.3

[net-next 02/15] e1000e: Fix 82572EI that has no hardware timestamp support

[Jeff Kirsher]

From: Mathias Koehrer <mathias.koehrer@etas.com>

With the Intel 82527EI (driver: e1000e) there is an issue when running
the ptpd2 program, that leads to a kernel oops.  The reason is here that
in e1000_xmit_frame() a work queue will be scheduled that has not been
initialized in this case.  The work queue "tx_hwstamp_work" will only be
initialized if adapter->flags & FLAG_HAS_HW_TIMESTAMP set.  This check
is missing in e1000_xmit_frame().

The following patch adds the missing check.

Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 38cb586..aa39a81 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5636,8 +5636,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
 			     nr_frags);
 	if (count) {
-		if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
-			     !adapter->tx_hwtstamp_skb)) {
+		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		    (adapter->flags & FLAG_HAS_HW_TIMESTAMP) &&
+		    !adapter->tx_hwtstamp_skb) {
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
 			adapter->tx_hwtstamp_skb = skb_get(skb);
-- 
1.9.3

[net-next 03/15] virtio_net: add software timestamp support

[Jeff Kirsher]

From: Jacob Keller <jacob.e.keller@intel.com>

This patch enables the use of software timestamping via the virtio_net
driver.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/virtio_net.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 11e2e81..9bd71d5 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -925,6 +925,9 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Free up any pending old buffers before queueing new ones. */
 	free_old_xmit_skbs(sq);
 
+	/* timestamp packet in software */
+	skb_tx_timestamp(skb);
+
 	/* Try to transmit */
 	err = xmit_skb(sq, skb);
 
@@ -1376,6 +1379,7 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
 	.get_ringparam = virtnet_get_ringparam,
 	.set_channels = virtnet_set_channels,
 	.get_channels = virtnet_get_channels,
+	.get_ts_info = ethtool_op_get_ts_info,
 };
 
 #define MIN_MTU 68
-- 
1.9.3

[net-next 04/15] igb: Clean-up page reuse code

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@redhat.com>

This patch cleans up the page reuse code getting it into a state where all
the workarounds needed are in place as well as cleaning up a few minor
oversights such as using __free_pages instead of put_page to drop a locally
allocated page.

It also cleans up how we clear the descriptor status bits.  Previously they
were zeroed as a part of clearing the hdr_addr.  However the hdr_addr is a
64 bit field and 64 bit writes can be a bit more expensive on on 32 bit
systems.  Since we are no longer using the header split feature the upper
32 bits of the address no longer need to be cleared.  As a result we can
just clear the status bits and leave the length and VLAN fields as-is which
should provide more information in debugging.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 35 ++++++++++++++-----------------
 1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6c25ec3..d1480f3 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6527,15 +6527,17 @@ static void igb_reuse_rx_page(struct igb_ring *rx_ring,
 					 DMA_FROM_DEVICE);
 }
 
+static inline bool igb_page_is_reserved(struct page *page)
+{
+	return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+}
+
 static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
 				  struct page *page,
 				  unsigned int truesize)
 {
 	/* avoid re-using remote pages */
-	if (unlikely(page_to_nid(page) != numa_node_id()))
-		return false;
-
-	if (unlikely(page->pfmemalloc))
+	if (unlikely(igb_page_is_reserved(page)))
 		return false;
 
 #if (PAGE_SIZE < 8192)
@@ -6545,22 +6547,19 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
 
 	/* flip page offset to other buffer */
 	rx_buffer->page_offset ^= IGB_RX_BUFSZ;
-
-	/* Even if we own the page, we are not allowed to use atomic_set()
-	 * This would break get_page_unless_zero() users.
-	 */
-	atomic_inc(&page->_count);
 #else
 	/* move offset up to the next cache line */
 	rx_buffer->page_offset += truesize;
 
 	if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
 		return false;
-
-	/* bump ref count on page before it is given to the stack */
-	get_page(page);
 #endif
 
+	/* Even if we own the page, we are not allowed to use atomic_set()
+	 * This would break get_page_unless_zero() users.
+	 */
+	atomic_inc(&page->_count);
+
 	return true;
 }
 
@@ -6603,13 +6602,12 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring,
 
 		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
 
-		/* we can reuse buffer as-is, just make sure it is local */
-		if (likely((page_to_nid(page) == numa_node_id()) &&
-			   !page->pfmemalloc))
+		/* page is not reserved, we can reuse buffer as-is */
+		if (likely(!igb_page_is_reserved(page)))
 			return true;
 
 		/* this page cannot be reused so discard it */
-		put_page(page);
+		__free_page(page);
 		return false;
 	}
 
@@ -6627,7 +6625,6 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
 	struct page *page;
 
 	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
-
 	page = rx_buffer->page;
 	prefetchw(page);
 
@@ -7042,8 +7039,8 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
 			i -= rx_ring->count;
 		}
 
-		/* clear the hdr_addr for the next_to_use descriptor */
-		rx_desc->read.hdr_addr = 0;
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->wb.upper.status_error = 0;
 
 		cleaned_count--;
 	} while (cleaned_count);
-- 
1.9.3

[net-next 05/15] fm10k: Clean-up page reuse code

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@redhat.com>

This patch cleans up the page reuse code getting it into a state where all
the workarounds needed are in place as well as cleaning up a few minor
oversights such as using __free_pages instead of put_page to drop a locally
allocated page.

It also cleans up how we clear the descriptor status bits.  Previously they
were zeroed as a part of clearing the hdr_addr.  However the hdr_addr is a
64 bit field and 64 bit writes can be a bit more expensive on on 32 bit
systems.  Since we are no longer using the header split feature the upper
32 bits of the address no longer need to be cleared.  As a result we can
just clear the status bits and leave the length and VLAN fields as-is which
should provide more information in debugging.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_main.c | 34 +++++++++++++--------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index caa43f7..c7a19a5 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -97,7 +97,6 @@ static bool fm10k_alloc_mapped_page(struct fm10k_ring *rx_ring,
 	 */
 	if (dma_mapping_error(rx_ring->dev, dma)) {
 		__free_page(page);
-		bi->page = NULL;
 
 		rx_ring->rx_stats.alloc_failed++;
 		return false;
@@ -147,8 +146,8 @@ void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count)
 			i -= rx_ring->count;
 		}
 
-		/* clear the hdr_addr for the next_to_use descriptor */
-		rx_desc->q.hdr_addr = 0;
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->d.staterr = 0;
 
 		cleaned_count--;
 	} while (cleaned_count);
@@ -194,7 +193,7 @@ static void fm10k_reuse_rx_page(struct fm10k_ring *rx_ring,
 	rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
 
 	/* transfer page from old buffer to new buffer */
-	memcpy(new_buff, old_buff, sizeof(struct fm10k_rx_buffer));
+	*new_buff = *old_buff;
 
 	/* sync the buffer for use by the device */
 	dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
@@ -203,12 +202,17 @@ static void fm10k_reuse_rx_page(struct fm10k_ring *rx_ring,
 					 DMA_FROM_DEVICE);
 }
 
+static inline bool fm10k_page_is_reserved(struct page *page)
+{
+	return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+}
+
 static bool fm10k_can_reuse_rx_page(struct fm10k_rx_buffer *rx_buffer,
 				    struct page *page,
 				    unsigned int truesize)
 {
 	/* avoid re-using remote pages */
-	if (unlikely(page_to_nid(page) != numa_mem_id()))
+	if (unlikely(fm10k_page_is_reserved(page)))
 		return false;
 
 #if (PAGE_SIZE < 8192)
@@ -218,22 +222,19 @@ static bool fm10k_can_reuse_rx_page(struct fm10k_rx_buffer *rx_buffer,
 
 	/* flip page offset to other buffer */
 	rx_buffer->page_offset ^= FM10K_RX_BUFSZ;
-
-	/* Even if we own the page, we are not allowed to use atomic_set()
-	 * This would break get_page_unless_zero() users.
-	 */
-	atomic_inc(&page->_count);
 #else
 	/* move offset up to the next cache line */
 	rx_buffer->page_offset += truesize;
 
 	if (rx_buffer->page_offset > (PAGE_SIZE - FM10K_RX_BUFSZ))
 		return false;
-
-	/* bump ref count on page before it is given to the stack */
-	get_page(page);
 #endif
 
+	/* Even if we own the page, we are not allowed to use atomic_set()
+	 * This would break get_page_unless_zero() users.
+	 */
+	atomic_inc(&page->_count);
+
 	return true;
 }
 
@@ -270,12 +271,12 @@ static bool fm10k_add_rx_frag(struct fm10k_ring *rx_ring,
 
 		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
 
-		/* we can reuse buffer as-is, just make sure it is local */
-		if (likely(page_to_nid(page) == numa_mem_id()))
+		/* page is not reserved, we can reuse buffer as-is */
+		if (likely(!fm10k_page_is_reserved(page)))
 			return true;
 
 		/* this page cannot be reused so discard it */
-		put_page(page);
+		__free_page(page);
 		return false;
 	}
 
@@ -293,7 +294,6 @@ static struct sk_buff *fm10k_fetch_rx_buffer(struct fm10k_ring *rx_ring,
 	struct page *page;
 
 	rx_buffer = &rx_ring->rx_buffer[rx_ring->next_to_clean];
-
 	page = rx_buffer->page;
 	prefetchw(page);
 
-- 
1.9.3

[net-next 06/15] igb: refactor time sync interrupt handling

[Jeff Kirsher]

From: Richard Cochran <richardcochran@gmail.com>

The code that handles the time sync interrupt is repeated in three
different places. This patch refactors the identical code blocks into
a single helper function.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 49 ++++++++++++-------------------
 1 file changed, 19 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index d1480f3..135ac5c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5384,6 +5384,19 @@ void igb_update_stats(struct igb_adapter *adapter,
 	}
 }
 
+static void igb_tsync_interrupt(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tsicr = rd32(E1000_TSICR);
+
+	if (tsicr & E1000_TSICR_TXTS) {
+		/* acknowledge the interrupt */
+		wr32(E1000_TSICR, E1000_TSICR_TXTS);
+		/* retrieve hardware timestamp */
+		schedule_work(&adapter->ptp_tx_work);
+	}
+}
+
 static irqreturn_t igb_msix_other(int irq, void *data)
 {
 	struct igb_adapter *adapter = data;
@@ -5415,16 +5428,8 @@ static irqreturn_t igb_msix_other(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (icr & E1000_ICR_TS) {
-		u32 tsicr = rd32(E1000_TSICR);
-
-		if (tsicr & E1000_TSICR_TXTS) {
-			/* acknowledge the interrupt */
-			wr32(E1000_TSICR, E1000_TSICR_TXTS);
-			/* retrieve hardware timestamp */
-			schedule_work(&adapter->ptp_tx_work);
-		}
-	}
+	if (icr & E1000_ICR_TS)
+		igb_tsync_interrupt(adapter);
 
 	wr32(E1000_EIMS, adapter->eims_other);
 
@@ -6203,16 +6208,8 @@ static irqreturn_t igb_intr_msi(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (icr & E1000_ICR_TS) {
-		u32 tsicr = rd32(E1000_TSICR);
-
-		if (tsicr & E1000_TSICR_TXTS) {
-			/* acknowledge the interrupt */
-			wr32(E1000_TSICR, E1000_TSICR_TXTS);
-			/* retrieve hardware timestamp */
-			schedule_work(&adapter->ptp_tx_work);
-		}
-	}
+	if (icr & E1000_ICR_TS)
+		igb_tsync_interrupt(adapter);
 
 	napi_schedule(&q_vector->napi);
 
@@ -6257,16 +6254,8 @@ static irqreturn_t igb_intr(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (icr & E1000_ICR_TS) {
-		u32 tsicr = rd32(E1000_TSICR);
-
-		if (tsicr & E1000_TSICR_TXTS) {
-			/* acknowledge the interrupt */
-			wr32(E1000_TSICR, E1000_TSICR_TXTS);
-			/* retrieve hardware timestamp */
-			schedule_work(&adapter->ptp_tx_work);
-		}
-	}
+	if (icr & E1000_ICR_TS)
+		igb_tsync_interrupt(adapter);
 
 	napi_schedule(&q_vector->napi);
 
-- 
1.9.3

[net-next 07/15] igb: serialize access to the time sync interrupt registers

[Jeff Kirsher]

From: Richard Cochran <richardcochran@gmail.com>

The time sync related interrupt registers may be manipulated from
different contexts. This patch protects the registers from being
asynchronously changed by the reset function.

Also, the patch removes a misleading comment. The reset function
is disabling a bunch of functions, not enabling them.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 5e7a4e3..8389bb4 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -900,6 +900,7 @@ void igb_ptp_stop(struct igb_adapter *adapter)
 void igb_ptp_reset(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	unsigned long flags;
 
 	if (!(adapter->flags & IGB_FLAG_PTP))
 		return;
@@ -907,6 +908,8 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	/* reset the tstamp_config */
 	igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
 
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+
 	switch (adapter->hw.mac.type) {
 	case e1000_82576:
 		/* Dial the nominal frequency. */
@@ -917,23 +920,24 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	case e1000_i350:
 	case e1000_i210:
 	case e1000_i211:
-		/* Enable the timer functions and interrupts. */
 		wr32(E1000_TSAUXC, 0x0);
 		wr32(E1000_TSIM, TSYNC_INTERRUPTS);
 		wr32(E1000_IMS, E1000_IMS_TS);
 		break;
 	default:
 		/* No work to do. */
-		return;
+		goto out;
 	}
 
 	/* Re-initialize the timer. */
 	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
 		struct timespec ts = ktime_to_timespec(ktime_get_real());
 
-		igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
+		igb_ptp_write_i210(adapter, &ts);
 	} else {
 		timecounter_init(&adapter->tc, &adapter->cc,
 				 ktime_to_ns(ktime_get_real()));
 	}
+out:
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 }
-- 
1.9.3

[net-next 08/15] igb: enable internal PPS for the i210

[Jeff Kirsher]

From: Richard Cochran <richardcochran@gmail.com>

The i210 device can produce an interrupt on the full second. This
patch allows using this interrupt to generate an internal PPS event
for adjusting the kernel system time.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 18 ++++++++++++++---
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 32 +++++++++++++++++++++++++++++--
 2 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 135ac5c..e844162 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5387,14 +5387,26 @@ void igb_update_stats(struct igb_adapter *adapter,
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 tsicr = rd32(E1000_TSICR);
+	struct ptp_clock_event event;
+	u32 ack = 0, tsicr = rd32(E1000_TSICR);
+
+	if (tsicr & TSINTR_SYS_WRAP) {
+		event.type = PTP_CLOCK_PPS;
+		if (adapter->ptp_caps.pps)
+			ptp_clock_event(adapter->ptp_clock, &event);
+		else
+			dev_err(&adapter->pdev->dev, "unexpected SYS WRAP");
+		ack |= TSINTR_SYS_WRAP;
+	}
 
 	if (tsicr & E1000_TSICR_TXTS) {
-		/* acknowledge the interrupt */
-		wr32(E1000_TSICR, E1000_TSICR_TXTS);
 		/* retrieve hardware timestamp */
 		schedule_work(&adapter->ptp_tx_work);
+		ack |= E1000_TSICR_TXTS;
 	}
+
+	/* acknowledge the interrupts */
+	wr32(E1000_TSICR, ack);
 }
 
 static irqreturn_t igb_msix_other(int irq, void *data)
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 8389bb4..98c58d9 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -355,6 +355,34 @@ static int igb_ptp_settime_i210(struct ptp_clock_info *ptp,
 	return 0;
 }
 
+static int igb_ptp_feature_enable_i210(struct ptp_clock_info *ptp,
+				       struct ptp_clock_request *rq, int on)
+{
+	struct igb_adapter *igb =
+		container_of(ptp, struct igb_adapter, ptp_caps);
+	struct e1000_hw *hw = &igb->hw;
+	unsigned long flags;
+	u32 tsim;
+
+	switch (rq->type) {
+	case PTP_CLK_REQ_PPS:
+		spin_lock_irqsave(&igb->tmreg_lock, flags);
+		tsim = rd32(E1000_TSIM);
+		if (on)
+			tsim |= TSINTR_SYS_WRAP;
+		else
+			tsim &= ~TSINTR_SYS_WRAP;
+		wr32(E1000_TSIM, tsim);
+		spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+		return 0;
+
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
 static int igb_ptp_feature_enable(struct ptp_clock_info *ptp,
 				  struct ptp_clock_request *rq, int on)
 {
@@ -797,12 +825,12 @@ void igb_ptp_init(struct igb_adapter *adapter)
 		adapter->ptp_caps.owner = THIS_MODULE;
 		adapter->ptp_caps.max_adj = 62499999;
 		adapter->ptp_caps.n_ext_ts = 0;
-		adapter->ptp_caps.pps = 0;
+		adapter->ptp_caps.pps = 1;
 		adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
 		adapter->ptp_caps.adjtime = igb_ptp_adjtime_i210;
 		adapter->ptp_caps.gettime = igb_ptp_gettime_i210;
 		adapter->ptp_caps.settime = igb_ptp_settime_i210;
-		adapter->ptp_caps.enable = igb_ptp_feature_enable;
+		adapter->ptp_caps.enable = igb_ptp_feature_enable_i210;
 		/* Enable the timer functions by clearing bit 31. */
 		wr32(E1000_TSAUXC, 0x0);
 		break;
-- 
1.9.3

[net-next 09/15] igb: enable auxiliary PHC functions for the i210

[Jeff Kirsher]

From: Richard Cochran <richardcochran@gmail.com>

The i210 device offers a number of special PTP Hardware Clock features on
the Software Defined Pins (SDPs). This patch adds support for two of the
possible functions, namely time stamping external events, and periodic
output signals.

The assignment of PHC functions to the four SDP can be freely chosen by
the user.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h      |   9 ++
 drivers/net/ethernet/intel/igb/igb_main.c |  51 ++++++-
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 222 +++++++++++++++++++++++++++++-
 3 files changed, 276 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index ee22da3..c2bd4f9 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -343,6 +343,9 @@ struct hwmon_buff {
 	};
 #endif
 
+#define IGB_N_EXTTS	2
+#define IGB_N_PEROUT	2
+#define IGB_N_SDP	4
 #define IGB_RETA_SIZE	128
 
 /* board specific private data structure */
@@ -439,6 +442,12 @@ struct igb_adapter {
 	u32 tx_hwtstamp_timeouts;
 	u32 rx_hwtstamp_cleared;
 
+	struct ptp_pin_desc sdp_config[IGB_N_SDP];
+	struct {
+		struct timespec start;
+		struct timespec period;
+	} perout[IGB_N_PEROUT];
+
 	char fw_version[32];
 #ifdef CONFIG_IGB_HWMON
 	struct hwmon_buff *igb_hwmon_buff;
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index e844162..6e65449 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5388,7 +5388,8 @@ static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct ptp_clock_event event;
-	u32 ack = 0, tsicr = rd32(E1000_TSICR);
+	struct timespec ts;
+	u32 ack = 0, tsauxc, sec, nsec, tsicr = rd32(E1000_TSICR);
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
@@ -5405,6 +5406,54 @@ static void igb_tsync_interrupt(struct igb_adapter *adapter)
 		ack |= E1000_TSICR_TXTS;
 	}
 
+	if (tsicr & TSINTR_TT0) {
+		spin_lock(&adapter->tmreg_lock);
+		ts = timespec_add(adapter->perout[0].start,
+				  adapter->perout[0].period);
+		wr32(E1000_TRGTTIML0, ts.tv_nsec);
+		wr32(E1000_TRGTTIMH0, ts.tv_sec);
+		tsauxc = rd32(E1000_TSAUXC);
+		tsauxc |= TSAUXC_EN_TT0;
+		wr32(E1000_TSAUXC, tsauxc);
+		adapter->perout[0].start = ts;
+		spin_unlock(&adapter->tmreg_lock);
+		ack |= TSINTR_TT0;
+	}
+
+	if (tsicr & TSINTR_TT1) {
+		spin_lock(&adapter->tmreg_lock);
+		ts = timespec_add(adapter->perout[1].start,
+				  adapter->perout[1].period);
+		wr32(E1000_TRGTTIML1, ts.tv_nsec);
+		wr32(E1000_TRGTTIMH1, ts.tv_sec);
+		tsauxc = rd32(E1000_TSAUXC);
+		tsauxc |= TSAUXC_EN_TT1;
+		wr32(E1000_TSAUXC, tsauxc);
+		adapter->perout[1].start = ts;
+		spin_unlock(&adapter->tmreg_lock);
+		ack |= TSINTR_TT1;
+	}
+
+	if (tsicr & TSINTR_AUTT0) {
+		nsec = rd32(E1000_AUXSTMPL0);
+		sec  = rd32(E1000_AUXSTMPH0);
+		event.type = PTP_CLOCK_EXTTS;
+		event.index = 0;
+		event.timestamp = sec * 1000000000ULL + nsec;
+		ptp_clock_event(adapter->ptp_clock, &event);
+		ack |= TSINTR_AUTT0;
+	}
+
+	if (tsicr & TSINTR_AUTT1) {
+		nsec = rd32(E1000_AUXSTMPL1);
+		sec  = rd32(E1000_AUXSTMPH1);
+		event.type = PTP_CLOCK_EXTTS;
+		event.index = 1;
+		event.timestamp = sec * 1000000000ULL + nsec;
+		ptp_clock_event(adapter->ptp_clock, &event);
+		ack |= TSINTR_AUTT1;
+	}
+
 	/* acknowledge the interrupts */
 	wr32(E1000_TSICR, ack);
 }
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 98c58d9..d20fc8e 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -355,16 +355,204 @@ static int igb_ptp_settime_i210(struct ptp_clock_info *ptp,
 	return 0;
 }
 
+static void igb_pin_direction(int pin, int input, u32 *ctrl, u32 *ctrl_ext)
+{
+	u32 *ptr = pin < 2 ? ctrl : ctrl_ext;
+	u32 mask[IGB_N_SDP] = {
+		E1000_CTRL_SDP0_DIR,
+		E1000_CTRL_SDP1_DIR,
+		E1000_CTRL_EXT_SDP2_DIR,
+		E1000_CTRL_EXT_SDP3_DIR,
+	};
+
+	if (input)
+		*ptr &= ~mask[pin];
+	else
+		*ptr |= mask[pin];
+}
+
+static void igb_pin_extts(struct igb_adapter *igb, int chan, int pin)
+{
+	struct e1000_hw *hw = &igb->hw;
+	u32 aux0_sel_sdp[IGB_N_SDP] = {
+		AUX0_SEL_SDP0, AUX0_SEL_SDP1, AUX0_SEL_SDP2, AUX0_SEL_SDP3,
+	};
+	u32 aux1_sel_sdp[IGB_N_SDP] = {
+		AUX1_SEL_SDP0, AUX1_SEL_SDP1, AUX1_SEL_SDP2, AUX1_SEL_SDP3,
+	};
+	u32 ts_sdp_en[IGB_N_SDP] = {
+		TS_SDP0_EN, TS_SDP1_EN, TS_SDP2_EN, TS_SDP3_EN,
+	};
+	u32 ctrl, ctrl_ext, tssdp = 0;
+
+	ctrl = rd32(E1000_CTRL);
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	tssdp = rd32(E1000_TSSDP);
+
+	igb_pin_direction(pin, 1, &ctrl, &ctrl_ext);
+
+	/* Make sure this pin is not enabled as an output. */
+	tssdp &= ~ts_sdp_en[pin];
+
+	if (chan == 1) {
+		tssdp &= ~AUX1_SEL_SDP3;
+		tssdp |= aux1_sel_sdp[pin] | AUX1_TS_SDP_EN;
+	} else {
+		tssdp &= ~AUX0_SEL_SDP3;
+		tssdp |= aux0_sel_sdp[pin] | AUX0_TS_SDP_EN;
+	}
+
+	wr32(E1000_TSSDP, tssdp);
+	wr32(E1000_CTRL, ctrl);
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
+static void igb_pin_perout(struct igb_adapter *igb, int chan, int pin)
+{
+	struct e1000_hw *hw = &igb->hw;
+	u32 aux0_sel_sdp[IGB_N_SDP] = {
+		AUX0_SEL_SDP0, AUX0_SEL_SDP1, AUX0_SEL_SDP2, AUX0_SEL_SDP3,
+	};
+	u32 aux1_sel_sdp[IGB_N_SDP] = {
+		AUX1_SEL_SDP0, AUX1_SEL_SDP1, AUX1_SEL_SDP2, AUX1_SEL_SDP3,
+	};
+	u32 ts_sdp_en[IGB_N_SDP] = {
+		TS_SDP0_EN, TS_SDP1_EN, TS_SDP2_EN, TS_SDP3_EN,
+	};
+	u32 ts_sdp_sel_tt0[IGB_N_SDP] = {
+		TS_SDP0_SEL_TT0, TS_SDP1_SEL_TT0,
+		TS_SDP2_SEL_TT0, TS_SDP3_SEL_TT0,
+	};
+	u32 ts_sdp_sel_tt1[IGB_N_SDP] = {
+		TS_SDP0_SEL_TT1, TS_SDP1_SEL_TT1,
+		TS_SDP2_SEL_TT1, TS_SDP3_SEL_TT1,
+	};
+	u32 ts_sdp_sel_clr[IGB_N_SDP] = {
+		TS_SDP0_SEL_FC1, TS_SDP1_SEL_FC1,
+		TS_SDP2_SEL_FC1, TS_SDP3_SEL_FC1,
+	};
+	u32 ctrl, ctrl_ext, tssdp = 0;
+
+	ctrl = rd32(E1000_CTRL);
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	tssdp = rd32(E1000_TSSDP);
+
+	igb_pin_direction(pin, 0, &ctrl, &ctrl_ext);
+
+	/* Make sure this pin is not enabled as an input. */
+	if ((tssdp & AUX0_SEL_SDP3) == aux0_sel_sdp[pin])
+		tssdp &= ~AUX0_TS_SDP_EN;
+
+	if ((tssdp & AUX1_SEL_SDP3) == aux1_sel_sdp[pin])
+		tssdp &= ~AUX1_TS_SDP_EN;
+
+	tssdp &= ~ts_sdp_sel_clr[pin];
+	if (chan == 1)
+		tssdp |= ts_sdp_sel_tt1[pin];
+	else
+		tssdp |= ts_sdp_sel_tt0[pin];
+
+	tssdp |= ts_sdp_en[pin];
+
+	wr32(E1000_TSSDP, tssdp);
+	wr32(E1000_CTRL, ctrl);
+	wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
 static int igb_ptp_feature_enable_i210(struct ptp_clock_info *ptp,
 				       struct ptp_clock_request *rq, int on)
 {
 	struct igb_adapter *igb =
 		container_of(ptp, struct igb_adapter, ptp_caps);
 	struct e1000_hw *hw = &igb->hw;
+	u32 tsauxc, tsim, tsauxc_mask, tsim_mask, trgttiml, trgttimh;
 	unsigned long flags;
-	u32 tsim;
+	struct timespec ts;
+	int pin;
+	s64 ns;
 
 	switch (rq->type) {
+	case PTP_CLK_REQ_EXTTS:
+		if (on) {
+			pin = ptp_find_pin(igb->ptp_clock, PTP_PF_EXTTS,
+					   rq->extts.index);
+			if (pin < 0)
+				return -EBUSY;
+		}
+		if (rq->extts.index == 1) {
+			tsauxc_mask = TSAUXC_EN_TS1;
+			tsim_mask = TSINTR_AUTT1;
+		} else {
+			tsauxc_mask = TSAUXC_EN_TS0;
+			tsim_mask = TSINTR_AUTT0;
+		}
+		spin_lock_irqsave(&igb->tmreg_lock, flags);
+		tsauxc = rd32(E1000_TSAUXC);
+		tsim = rd32(E1000_TSIM);
+		if (on) {
+			igb_pin_extts(igb, rq->extts.index, pin);
+			tsauxc |= tsauxc_mask;
+			tsim |= tsim_mask;
+		} else {
+			tsauxc &= ~tsauxc_mask;
+			tsim &= ~tsim_mask;
+		}
+		wr32(E1000_TSAUXC, tsauxc);
+		wr32(E1000_TSIM, tsim);
+		spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+		return 0;
+
+	case PTP_CLK_REQ_PEROUT:
+		if (on) {
+			pin = ptp_find_pin(igb->ptp_clock, PTP_PF_PEROUT,
+					   rq->perout.index);
+			if (pin < 0)
+				return -EBUSY;
+		}
+		ts.tv_sec = rq->perout.period.sec;
+		ts.tv_nsec = rq->perout.period.nsec;
+		ns = timespec_to_ns(&ts);
+		ns = ns >> 1;
+		if (on && ns < 500000LL) {
+			/* 2k interrupts per second is an awful lot. */
+			return -EINVAL;
+		}
+		ts = ns_to_timespec(ns);
+		if (rq->perout.index == 1) {
+			tsauxc_mask = TSAUXC_EN_TT1;
+			tsim_mask = TSINTR_TT1;
+			trgttiml = E1000_TRGTTIML1;
+			trgttimh = E1000_TRGTTIMH1;
+		} else {
+			tsauxc_mask = TSAUXC_EN_TT0;
+			tsim_mask = TSINTR_TT0;
+			trgttiml = E1000_TRGTTIML0;
+			trgttimh = E1000_TRGTTIMH0;
+		}
+		spin_lock_irqsave(&igb->tmreg_lock, flags);
+		tsauxc = rd32(E1000_TSAUXC);
+		tsim = rd32(E1000_TSIM);
+		if (on) {
+			int i = rq->perout.index;
+
+			igb_pin_perout(igb, i, pin);
+			igb->perout[i].start.tv_sec = rq->perout.start.sec;
+			igb->perout[i].start.tv_nsec = rq->perout.start.nsec;
+			igb->perout[i].period.tv_sec = ts.tv_sec;
+			igb->perout[i].period.tv_nsec = ts.tv_nsec;
+			wr32(trgttiml, rq->perout.start.sec);
+			wr32(trgttimh, rq->perout.start.nsec);
+			tsauxc |= tsauxc_mask;
+			tsim |= tsim_mask;
+		} else {
+			tsauxc &= ~tsauxc_mask;
+			tsim &= ~tsim_mask;
+		}
+		wr32(E1000_TSAUXC, tsauxc);
+		wr32(E1000_TSIM, tsim);
+		spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+		return 0;
+
 	case PTP_CLK_REQ_PPS:
 		spin_lock_irqsave(&igb->tmreg_lock, flags);
 		tsim = rd32(E1000_TSIM);
@@ -375,9 +563,6 @@ static int igb_ptp_feature_enable_i210(struct ptp_clock_info *ptp,
 		wr32(E1000_TSIM, tsim);
 		spin_unlock_irqrestore(&igb->tmreg_lock, flags);
 		return 0;
-
-	default:
-		break;
 	}
 
 	return -EOPNOTSUPP;
@@ -389,6 +574,20 @@ static int igb_ptp_feature_enable(struct ptp_clock_info *ptp,
 	return -EOPNOTSUPP;
 }
 
+static int igb_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin,
+			      enum ptp_pin_function func, unsigned int chan)
+{
+	switch (func) {
+	case PTP_PF_NONE:
+	case PTP_PF_EXTTS:
+	case PTP_PF_PEROUT:
+		break;
+	case PTP_PF_PHYSYNC:
+		return -1;
+	}
+	return 0;
+}
+
 /**
  * igb_ptp_tx_work
  * @work: pointer to work struct
@@ -779,6 +978,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
+	int i;
 
 	switch (hw->mac.type) {
 	case e1000_82576:
@@ -821,16 +1021,27 @@ void igb_ptp_init(struct igb_adapter *adapter)
 		break;
 	case e1000_i210:
 	case e1000_i211:
+		for (i = 0; i < IGB_N_SDP; i++) {
+			struct ptp_pin_desc *ppd = &adapter->sdp_config[i];
+
+			snprintf(ppd->name, sizeof(ppd->name), "SDP%d", i);
+			ppd->index = i;
+			ppd->func = PTP_PF_NONE;
+		}
 		snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
 		adapter->ptp_caps.owner = THIS_MODULE;
 		adapter->ptp_caps.max_adj = 62499999;
-		adapter->ptp_caps.n_ext_ts = 0;
+		adapter->ptp_caps.n_ext_ts = IGB_N_EXTTS;
+		adapter->ptp_caps.n_per_out = IGB_N_PEROUT;
+		adapter->ptp_caps.n_pins = IGB_N_SDP;
 		adapter->ptp_caps.pps = 1;
+		adapter->ptp_caps.pin_config = adapter->sdp_config;
 		adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
 		adapter->ptp_caps.adjtime = igb_ptp_adjtime_i210;
 		adapter->ptp_caps.gettime = igb_ptp_gettime_i210;
 		adapter->ptp_caps.settime = igb_ptp_settime_i210;
 		adapter->ptp_caps.enable = igb_ptp_feature_enable_i210;
+		adapter->ptp_caps.verify = igb_ptp_verify_pin;
 		/* Enable the timer functions by clearing bit 31. */
 		wr32(E1000_TSAUXC, 0x0);
 		break;
@@ -949,6 +1160,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	case e1000_i210:
 	case e1000_i211:
 		wr32(E1000_TSAUXC, 0x0);
+		wr32(E1000_TSSDP, 0x0);
 		wr32(E1000_TSIM, TSYNC_INTERRUPTS);
 		wr32(E1000_IMS, E1000_IMS_TS);
 		break;
-- 
1.9.3

[net-next 10/15] net/fm10k: Avoid double setting of NETIF_F_SG for the HW encapsulation feature mask

[Jeff Kirsher]

From: Or Gerlitz <ogerlitz@mellanox.com>

The networking core does it for the driver during registration time.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index 945b35d..cfde8ba 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -1414,13 +1414,12 @@ struct net_device *fm10k_alloc_netdev(void)
 	dev->vlan_features |= dev->features;
 
 	/* configure tunnel offloads */
-	dev->hw_enc_features = NETIF_F_IP_CSUM |
-			       NETIF_F_TSO |
-			       NETIF_F_TSO6 |
-			       NETIF_F_TSO_ECN |
-			       NETIF_F_GSO_UDP_TUNNEL |
-			       NETIF_F_IPV6_CSUM |
-			       NETIF_F_SG;
+	dev->hw_enc_features |= NETIF_F_IP_CSUM |
+				NETIF_F_TSO |
+				NETIF_F_TSO6 |
+				NETIF_F_TSO_ECN |
+				NETIF_F_GSO_UDP_TUNNEL |
+				NETIF_F_IPV6_CSUM;
 
 	/* we want to leave these both on as we cannot disable VLAN tag
 	 * insertion or stripping on the hardware since it is contained
-- 
1.9.3

[net-next 11/15] fm10k: Check tunnel header length in encap offload

[Jeff Kirsher]

From: Joe Stringer <joestringer@nicira.com>

fm10k supports up to 184 bytes of inner+outer headers. Add an initial
check to fail encap offload if these are too large.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index c7a19a5..84ab9ee 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -727,6 +727,12 @@ static __be16 fm10k_tx_encap_offload(struct sk_buff *skb)
 	struct ethhdr *eth_hdr;
 	u8 l4_hdr = 0;
 
+/* fm10k supports 184 octets of outer+inner headers. Minus 20 for inner L4. */
+#define FM10K_MAX_ENCAP_TRANSPORT_OFFSET	164
+	if (skb_inner_transport_header(skb) - skb_mac_header(skb) >
+	    FM10K_MAX_ENCAP_TRANSPORT_OFFSET)
+		return 0;
+
 	switch (vlan_get_protocol(skb)) {
 	case htons(ETH_P_IP):
 		l4_hdr = ip_hdr(skb)->protocol;
-- 
1.9.3

[net-next 12/15] fm10k: Increase the timeout for the data path reset

[Jeff Kirsher]

From: Matthew Vick <matthew.vick@intel.com>

Based on feedback from the hardware team, 100us is too short of a time
to wait for the data path reset to complete and the recommendation is to
increase this timeout to 150us.

Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_type.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
index 280296f..7c6d9d5 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_type.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
@@ -354,7 +354,7 @@ struct fm10k_hw;
 
 /* Define timeouts for resets and disables */
 #define FM10K_QUEUE_DISABLE_TIMEOUT		100
-#define FM10K_RESET_TIMEOUT			100
+#define FM10K_RESET_TIMEOUT			150
 
 /* VF registers */
 #define FM10K_VFCTRL		0x00000
-- 
1.9.3

[net-next 13/15] igb: Indicate failure on vf reset for empty mac address

[Jeff Kirsher]

From: Alexander Graf <agraf@suse.de>

Commit 5ac6f91d changed the igb driver to expose a zero (empty) mac
address to the VF on reset rather than a random one.

However, that behavioral change also requires igbvf driver changes
which can be hard especially when we want to talk to proprietary
guest OSs.

Looking at the code previous to the commit in Linux that made igbvf
work with empty mac addresses (8d56b6d), we can see that on reset
failure the driver will try to generate a new mac address with both
the old and the new code.

Furthermore, ixgbe does send reset failure when it detects an empty
mac address (35055928c).

So I think it's safe to make igb behave the same. With this patch I
can successfully run a Windows 8.1 guest with an empty mac address
and an assigned igbvf device that has no mac address set by the host.

If anyone is aware of a guest driver that chokes on NACK returns of
VF RESET commands, please speak up.

Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6e65449..f366b3b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6077,8 +6077,12 @@ static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
 	adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
 
 	/* reply to reset with ack and vf mac address */
-	msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
-	memcpy(addr, vf_mac, ETH_ALEN);
+	if (!is_zero_ether_addr(vf_mac)) {
+		msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+		memcpy(addr, vf_mac, ETH_ALEN);
+	} else {
+		msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_NACK;
+	}
 	igb_write_mbx(hw, msgbuf, 3, vf);
 }
 
-- 
1.9.3

[net-next 14/15] net: e1000: support txtd update delay via xmit_more

[Jeff Kirsher]

From: Florian Westphal <fw@strlen.de>

Don't update Tx tail descriptor if we queue hasn't been stopped and
we know at least one more skb will be sent right away.

Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 9242982..7f997d3 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -2977,7 +2977,6 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 			   struct e1000_tx_ring *tx_ring, int tx_flags,
 			   int count)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_tx_desc *tx_desc = NULL;
 	struct e1000_tx_buffer *buffer_info;
 	u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
@@ -3031,11 +3030,6 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, hw->hw_addr + tx_ring->tdt);
-	/* we need this if more than one processor can write to our tail
-	 * at a time, it synchronizes IO on IA64/Altix systems
-	 */
-	mmiowb();
 }
 
 /* 82547 workaround to avoid controller hang in half-duplex environment.
@@ -3264,6 +3258,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		/* Make sure there is space in the ring for the next send. */
 		e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
 
+		if (!skb->xmit_more ||
+		    netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
+			writel(tx_ring->next_to_use, hw->hw_addr + tx_ring->tdt);
+			/* we need this if more than one processor can write to
+			 * our tail at a time, it synchronizes IO on IA64/Altix
+			 * systems
+			 */
+			mmiowb();
+		}
 	} else {
 		dev_kfree_skb_any(skb);
 		tx_ring->buffer_info[first].time_stamp = 0;
-- 
1.9.3

[net-next 15/15] net: e1000e: support txtd update delay via xmit_more

[Jeff Kirsher]

From: Florian Westphal <fw@strlen.de>

Don't update Tx tail descriptor if queue hasn't been stopped
and we know at least one more skb will be sent right away.

Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index aa39a81..1e8c40f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5444,16 +5444,6 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
 	wmb();
 
 	tx_ring->next_to_use = i;
-
-	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
-		e1000e_update_tdt_wa(tx_ring, i);
-	else
-		writel(i, tx_ring->tail);
-
-	/* we need this if more than one processor can write to our tail
-	 * at a time, it synchronizes IO on IA64/Altix systems
-	 */
-	mmiowb();
 }
 
 #define MINIMUM_DHCP_PACKET_SIZE 282
@@ -5655,6 +5645,21 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    (MAX_SKB_FRAGS *
 				     DIV_ROUND_UP(PAGE_SIZE,
 						  adapter->tx_fifo_limit) + 2));
+
+		if (!skb->xmit_more ||
+		    netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_tdt_wa(tx_ring,
+						     tx_ring->next_to_use);
+			else
+				writel(tx_ring->next_to_use, tx_ring->tail);
+
+			/* we need this if more than one processor can write
+			 * to our tail at a time, it synchronizes IO on
+			 *IA64/Altix systems
+			 */
+			mmiowb();
+		}
 	} else {
 		dev_kfree_skb_any(skb);
 		tx_ring->buffer_info[first].time_stamp = 0;
-- 
1.9.3

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2015-01-22

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 22 Jan 2015 18:36:56 -0800

> This series contains updates to e1000, e1000e, igb, fm10k and virtio_net.

Pulled, thanks a lot Jeff.