All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
To: "Mark Brown" <broonie@kernel.org>,
	"Michal Simek" <michal.simek@xilinx.com>,
	"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
	linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Subject: [PATCH 05/18] spi/xilinx: Leave the IRQ always enabled.
Date: Fri, 23 Jan 2015 17:08:37 +0100	[thread overview]
Message-ID: <1422029330-10971-6-git-send-email-ricardo.ribalda@gmail.com> (raw)
In-Reply-To: <1422029330-10971-1-git-send-email-ricardo.ribalda@gmail.com>

Instead of enabling the IRQ and disabling it for every transaction.

Specially the small transactions (1,2 words) benefit from removing 3 bus
accesses.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
 drivers/spi/spi-xilinx.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 17480a2..408a842 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -167,8 +167,11 @@ static void xspi_init_hw(struct xilinx_spi *xspi)
 	/* Reset the SPI device */
 	xspi->write_fn(XIPIF_V123B_RESET_MASK,
 		regs_base + XIPIF_V123B_RESETR_OFFSET);
-	/* Disable all the interrupts just in case */
-	xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
+	/* Enable the transmit empty interrupt, which we use to determine
+	 * progress on the transmission.
+	 */
+	xspi->write_fn(XSPI_INTR_TX_EMPTY,
+			regs_base + XIPIF_V123B_IIER_OFFSET);
 	/* Enable the global IPIF interrupt */
 	xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
 		regs_base + XIPIF_V123B_DGIER_OFFSET);
@@ -237,7 +240,6 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
 static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
-	u32 ipif_ier;
 
 	/* We get here with transmitter inhibited */
 
@@ -246,14 +248,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	xspi->remaining_bytes = t->len;
 	reinit_completion(&xspi->done);
 
-
-	/* Enable the transmit empty interrupt, which we use to determine
-	 * progress on the transmission.
-	 */
-	ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
-	xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
-		xspi->regs + XIPIF_V123B_IIER_OFFSET);
-
 	for (;;) {
 		u16 cr;
 		int n_words;
@@ -290,9 +284,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 			break;
 	}
 
-	/* Disable the transmit empty interrupt */
-	xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
-
 	return t->len - xspi->remaining_bytes;
 }
 
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: ricardo.ribalda@gmail.com (Ricardo Ribalda Delgado)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/18] spi/xilinx: Leave the IRQ always enabled.
Date: Fri, 23 Jan 2015 17:08:37 +0100	[thread overview]
Message-ID: <1422029330-10971-6-git-send-email-ricardo.ribalda@gmail.com> (raw)
In-Reply-To: <1422029330-10971-1-git-send-email-ricardo.ribalda@gmail.com>

Instead of enabling the IRQ and disabling it for every transaction.

Specially the small transactions (1,2 words) benefit from removing 3 bus
accesses.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
 drivers/spi/spi-xilinx.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 17480a2..408a842 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -167,8 +167,11 @@ static void xspi_init_hw(struct xilinx_spi *xspi)
 	/* Reset the SPI device */
 	xspi->write_fn(XIPIF_V123B_RESET_MASK,
 		regs_base + XIPIF_V123B_RESETR_OFFSET);
-	/* Disable all the interrupts just in case */
-	xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
+	/* Enable the transmit empty interrupt, which we use to determine
+	 * progress on the transmission.
+	 */
+	xspi->write_fn(XSPI_INTR_TX_EMPTY,
+			regs_base + XIPIF_V123B_IIER_OFFSET);
 	/* Enable the global IPIF interrupt */
 	xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
 		regs_base + XIPIF_V123B_DGIER_OFFSET);
@@ -237,7 +240,6 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
 static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
-	u32 ipif_ier;
 
 	/* We get here with transmitter inhibited */
 
@@ -246,14 +248,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	xspi->remaining_bytes = t->len;
 	reinit_completion(&xspi->done);
 
-
-	/* Enable the transmit empty interrupt, which we use to determine
-	 * progress on the transmission.
-	 */
-	ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
-	xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
-		xspi->regs + XIPIF_V123B_IIER_OFFSET);
-
 	for (;;) {
 		u16 cr;
 		int n_words;
@@ -290,9 +284,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 			break;
 	}
 
-	/* Disable the transmit empty interrupt */
-	xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
-
 	return t->len - xspi->remaining_bytes;
 }
 
-- 
2.1.4

  parent reply	other threads:[~2015-01-23 16:09 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-23 16:08 [PATCH 00/18] spi/xilinx: Speed-up Ricardo Ribalda Delgado
2015-01-23 16:08 ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 01/18] spi/xilinx: Support for spi mode LSB_FIRST Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-26 19:23   ` Mark Brown
2015-01-26 19:23     ` Mark Brown
2015-01-26 19:23     ` Mark Brown
2015-01-23 16:08 ` [PATCH 02/18] spi/xilinx: Support for spi mode LOOP Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-26 19:23   ` Mark Brown
2015-01-26 19:23     ` Mark Brown
2015-01-26 19:23     ` Mark Brown
2015-01-23 16:08 ` [PATCH 03/18] spi/xilinx: Simplify data read from the Rx FIFO Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27 17:25   ` Mark Brown
2015-01-27 17:25     ` Mark Brown
2015-01-27 17:25     ` Mark Brown
2015-01-23 16:08 ` [PATCH 04/18] spi-xilinx: Simplify spi_fill_tx_fifo Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-26 23:54   ` Mark Brown
2015-01-26 23:54     ` Mark Brown
2015-01-23 16:08 ` Ricardo Ribalda Delgado [this message]
2015-01-23 16:08   ` [PATCH 05/18] spi/xilinx: Leave the IRQ always enabled Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 06/18] spi/xilinx: Code cleanup Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27  0:05   ` Mark Brown
2015-01-27  0:05     ` Mark Brown
2015-01-27  0:05     ` Mark Brown
2015-01-23 16:08 ` [PATCH 07/18] spi/xilinx: Use cached value of register Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 08/18] spi/xilinx: Support cores with no interrupt Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27  0:04   ` Mark Brown
2015-01-27  0:04     ` Mark Brown
2015-01-27  0:04     ` Mark Brown
2015-01-27 19:05     ` Ricardo Ribalda Delgado
2015-01-27 19:05       ` Ricardo Ribalda Delgado
2015-01-27 19:49       ` Mark Brown
2015-01-27 19:49         ` Mark Brown
2015-01-27 19:49         ` Mark Brown
2015-01-27 19:56         ` Ricardo Ribalda Delgado
2015-01-27 19:56           ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 09/18] spi/xilinx: Do not inhibit transmission in polling mode Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 10/18] spi/xilinx: Support for spi mode CS_HIGH Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 11/18] spi/xilinx: Remove rx_fn and tx_fn pointer Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27  0:09   ` Mark Brown
2015-01-27  0:09     ` Mark Brown
2015-01-27  0:09     ` Mark Brown
2015-01-27 10:00     ` Ricardo Ribalda Delgado
2015-01-27 10:00       ` Ricardo Ribalda Delgado
2015-01-27 10:00       ` Ricardo Ribalda Delgado
2015-01-27 15:42       ` Joe Perches
2015-01-27 15:42         ` Joe Perches
2015-01-27 15:42         ` Joe Perches
2015-01-27 19:07         ` Ricardo Ribalda Delgado
2015-01-27 19:07           ` Ricardo Ribalda Delgado
2015-01-27 19:07           ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 12/18] spi/xilinx: Make spi_tx and spi_rx simmetric Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 13/18] spi/xilinx: Convert remainding_bytes in remaining words Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 14/18] spi/xilinx: Convert bits_per_word in bytes_per_word Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 15/18] spi/xilinx: Remove iowrite/ioread wrappers Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 16/18] spi/xilinx: Reset core before buffer_size detection Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27  0:11   ` Mark Brown
2015-01-27  0:11     ` Mark Brown
2015-01-27  0:11     ` Mark Brown
2015-01-23 16:08 ` [PATCH 17/18] spi/xilinx: Remove remaining_words driver data variable Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-23 16:08 ` [PATCH 18/18] spi/xilinx: Check number of slaves range Ricardo Ribalda Delgado
2015-01-23 16:08   ` Ricardo Ribalda Delgado
2015-01-27  0:14 ` [PATCH 00/18] spi/xilinx: Speed-up Mark Brown
2015-01-27  0:14   ` Mark Brown
2015-01-27  0:14   ` Mark Brown
2015-01-27 10:17   ` Ricardo Ribalda Delgado
2015-01-27 10:17     ` Ricardo Ribalda Delgado
2015-01-27 11:59     ` Mark Brown
2015-01-27 11:59       ` Mark Brown
2015-01-27 11:59       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422029330-10971-6-git-send-email-ricardo.ribalda@gmail.com \
    --to=ricardo.ribalda@gmail.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=soren.brinkmann@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.