All of lore.kernel.org
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Subject: [Qemu-devel] [PATCH v3 07/14] qemu-img: Use BlockBackend as far as possible
Date: Mon, 26 Jan 2015 10:00:37 -0500	[thread overview]
Message-ID: <1422284444-12529-8-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1422284444-12529-1-git-send-email-mreitz@redhat.com>

Although qemu-img already creates BlockBackends, it does not do accesses
to the images through them. This patch converts all of the bdrv_* calls
for which this is currently possible to blk_* calls. Most of the
remaining calls will probably stay bdrv_* calls because they really do
operate on the BDS level instead of the BB level.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 qemu-img.c | 98 ++++++++++++++++++++++++++++++++++----------------------------
 1 file changed, 54 insertions(+), 44 deletions(-)

diff --git a/qemu-img.c b/qemu-img.c
index 0b23c87..8b4139e 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1008,19 +1008,19 @@ static int64_t sectors_to_process(int64_t total, int64_t from)
  * Returns 0 in case sectors are filled with 0, 1 if sectors contain non-zero
  * data and negative value on error.
  *
- * @param bs:  Driver used for accessing file
+ * @param blk:  BlockBackend for the image
  * @param sect_num: Number of first sector to check
  * @param sect_count: Number of sectors to check
  * @param filename: Name of disk file we are checking (logging purpose)
  * @param buffer: Allocated buffer for storing read data
  * @param quiet: Flag for quiet mode
  */
-static int check_empty_sectors(BlockDriverState *bs, int64_t sect_num,
+static int check_empty_sectors(BlockBackend *blk, int64_t sect_num,
                                int sect_count, const char *filename,
                                uint8_t *buffer, bool quiet)
 {
     int pnum, ret = 0;
-    ret = bdrv_read(bs, sect_num, buffer, sect_count);
+    ret = blk_read(blk, sect_num, buffer, sect_count);
     if (ret < 0) {
         error_report("Error while reading offset %" PRId64 " of %s: %s",
                      sectors_to_bytes(sect_num), filename, strerror(-ret));
@@ -1130,22 +1130,26 @@ static int img_compare(int argc, char **argv)
     }
     bs2 = blk_bs(blk2);
 
-    buf1 = qemu_blockalign(bs1, IO_BUF_SIZE);
-    buf2 = qemu_blockalign(bs2, IO_BUF_SIZE);
-    total_sectors1 = bdrv_nb_sectors(bs1);
+    buf1 = blk_blockalign(blk1, IO_BUF_SIZE);
+    buf2 = blk_blockalign(blk2, IO_BUF_SIZE);
+    total_sectors1 = blk_getlength(blk1);
     if (total_sectors1 < 0) {
         error_report("Can't get size of %s: %s",
                      filename1, strerror(-total_sectors1));
         ret = 4;
         goto out;
     }
-    total_sectors2 = bdrv_nb_sectors(bs2);
+    total_sectors2 = blk_getlength(blk2);
     if (total_sectors2 < 0) {
         error_report("Can't get size of %s: %s",
                      filename2, strerror(-total_sectors2));
         ret = 4;
         goto out;
     }
+
+    total_sectors1 /= BDRV_SECTOR_SIZE;
+    total_sectors2 /= BDRV_SECTOR_SIZE;
+
     total_sectors = MIN(total_sectors1, total_sectors2);
     progress_base = MAX(total_sectors1, total_sectors2);
 
@@ -1181,7 +1185,7 @@ static int img_compare(int argc, char **argv)
 
         if (allocated1 == allocated2) {
             if (allocated1) {
-                ret = bdrv_read(bs1, sector_num, buf1, nb_sectors);
+                ret = blk_read(blk1, sector_num, buf1, nb_sectors);
                 if (ret < 0) {
                     error_report("Error while reading offset %" PRId64 " of %s:"
                                  " %s", sectors_to_bytes(sector_num), filename1,
@@ -1189,7 +1193,7 @@ static int img_compare(int argc, char **argv)
                     ret = 4;
                     goto out;
                 }
-                ret = bdrv_read(bs2, sector_num, buf2, nb_sectors);
+                ret = blk_read(blk2, sector_num, buf2, nb_sectors);
                 if (ret < 0) {
                     error_report("Error while reading offset %" PRId64
                                  " of %s: %s", sectors_to_bytes(sector_num),
@@ -1216,10 +1220,10 @@ static int img_compare(int argc, char **argv)
             }
 
             if (allocated1) {
-                ret = check_empty_sectors(bs1, sector_num, nb_sectors,
+                ret = check_empty_sectors(blk1, sector_num, nb_sectors,
                                           filename1, buf1, quiet);
             } else {
-                ret = check_empty_sectors(bs2, sector_num, nb_sectors,
+                ret = check_empty_sectors(blk2, sector_num, nb_sectors,
                                           filename2, buf1, quiet);
             }
             if (ret) {
@@ -1236,18 +1240,18 @@ static int img_compare(int argc, char **argv)
     }
 
     if (total_sectors1 != total_sectors2) {
-        BlockDriverState *bs_over;
+        BlockBackend *blk_over;
         int64_t total_sectors_over;
         const char *filename_over;
 
         qprintf(quiet, "Warning: Image size mismatch!\n");
         if (total_sectors1 > total_sectors2) {
             total_sectors_over = total_sectors1;
-            bs_over = bs1;
+            blk_over = blk1;
             filename_over = filename1;
         } else {
             total_sectors_over = total_sectors2;
-            bs_over = bs2;
+            blk_over = blk2;
             filename_over = filename2;
         }
 
@@ -1256,7 +1260,7 @@ static int img_compare(int argc, char **argv)
             if (nb_sectors <= 0) {
                 break;
             }
-            ret = bdrv_is_allocated_above(bs_over, NULL, sector_num,
+            ret = bdrv_is_allocated_above(blk_bs(blk_over), NULL, sector_num,
                                           nb_sectors, &pnum);
             if (ret < 0) {
                 ret = 3;
@@ -1267,7 +1271,7 @@ static int img_compare(int argc, char **argv)
             }
             nb_sectors = pnum;
             if (ret) {
-                ret = check_empty_sectors(bs_over, sector_num, nb_sectors,
+                ret = check_empty_sectors(blk_over, sector_num, nb_sectors,
                                           filename_over, buf1, quiet);
                 if (ret) {
                     if (ret < 0) {
@@ -1476,13 +1480,14 @@ static int img_convert(int argc, char **argv)
             goto out;
         }
         bs[bs_i] = blk_bs(blk[bs_i]);
-        bs_sectors[bs_i] = bdrv_nb_sectors(bs[bs_i]);
+        bs_sectors[bs_i] = blk_getlength(blk[bs_i]);
         if (bs_sectors[bs_i] < 0) {
             error_report("Could not get size of %s: %s",
                          argv[optind + bs_i], strerror(-bs_sectors[bs_i]));
             ret = -1;
             goto out;
         }
+        bs_sectors[bs_i] /= BDRV_SECTOR_SIZE;
         total_sectors += bs_sectors[bs_i];
     }
 
@@ -1625,16 +1630,19 @@ static int img_convert(int argc, char **argv)
                                          out_bs->bl.discard_alignment))
                     );
 
-    buf = qemu_blockalign(out_bs, bufsectors * BDRV_SECTOR_SIZE);
+    buf = blk_blockalign(out_blk, bufsectors * BDRV_SECTOR_SIZE);
 
     if (skip_create) {
-        int64_t output_sectors = bdrv_nb_sectors(out_bs);
+        int64_t output_sectors = blk_getlength(out_blk);
         if (output_sectors < 0) {
             error_report("unable to get output image length: %s\n",
                          strerror(-output_sectors));
             ret = -1;
             goto out;
-        } else if (output_sectors < total_sectors) {
+        }
+
+        output_sectors /= BDRV_SECTOR_SIZE;
+        if (output_sectors < total_sectors) {
             error_report("output file is smaller than input file");
             ret = -1;
             goto out;
@@ -1696,7 +1704,7 @@ static int img_convert(int argc, char **argv)
                 nlow = remainder > bs_sectors[bs_i] - bs_num
                     ? bs_sectors[bs_i] - bs_num : remainder;
 
-                ret = bdrv_read(bs[bs_i], bs_num, buf2, nlow);
+                ret = blk_read(blk[bs_i], bs_num, buf2, nlow);
                 if (ret < 0) {
                     error_report("error while reading sector %" PRId64 ": %s",
                                  bs_num, strerror(-ret));
@@ -1711,7 +1719,7 @@ static int img_convert(int argc, char **argv)
             assert (remainder == 0);
 
             if (!buffer_is_zero(buf, n * BDRV_SECTOR_SIZE)) {
-                ret = bdrv_write_compressed(out_bs, sector_num, buf, n);
+                ret = blk_write_compressed(out_blk, sector_num, buf, n);
                 if (ret != 0) {
                     error_report("error while compressing sector %" PRId64
                                  ": %s", sector_num, strerror(-ret));
@@ -1722,7 +1730,7 @@ static int img_convert(int argc, char **argv)
             qemu_progress_print(100.0 * sector_num / total_sectors, 0);
         }
         /* signal EOF to align */
-        bdrv_write_compressed(out_bs, 0, NULL, 0);
+        blk_write_compressed(out_blk, 0, NULL, 0);
     } else {
         int64_t sectors_to_read, sectors_read, sector_num_next_status;
         bool count_allocated_sectors;
@@ -1823,7 +1831,7 @@ restart:
             }
 
             n1 = n;
-            ret = bdrv_read(bs[bs_i], sector_num - bs_offset, buf, n);
+            ret = blk_read(blk[bs_i], sector_num - bs_offset, buf, n);
             if (ret < 0) {
                 error_report("error while reading sector %" PRId64 ": %s",
                              sector_num - bs_offset, strerror(-ret));
@@ -1836,7 +1844,7 @@ restart:
             while (n > 0) {
                 if (!has_zero_init ||
                     is_allocated_sectors_min(buf1, n, &n1, min_sparse)) {
-                    ret = bdrv_write(out_bs, sector_num, buf1, n1);
+                    ret = blk_write(out_blk, sector_num, buf1, n1);
                     if (ret < 0) {
                         error_report("error while writing sector %" PRId64
                                      ": %s", sector_num, strerror(-ret));
@@ -2260,7 +2268,7 @@ static int img_map(int argc, char **argv)
         printf("%-16s%-16s%-16s%s\n", "Offset", "Length", "Mapped to", "File");
     }
 
-    length = bdrv_getlength(bs);
+    length = blk_getlength(blk);
     while (curr.start + curr.length < length) {
         int64_t nsectors_left;
         int64_t sector_num;
@@ -2429,7 +2437,7 @@ static int img_snapshot(int argc, char **argv)
 static int img_rebase(int argc, char **argv)
 {
     BlockBackend *blk = NULL, *blk_old_backing = NULL, *blk_new_backing = NULL;
-    BlockDriverState *bs = NULL, *bs_old_backing = NULL, *bs_new_backing = NULL;
+    BlockDriverState *bs = NULL;
     char *filename;
     const char *fmt, *cache, *src_cache, *out_basefmt, *out_baseimg;
     int c, flags, src_flags, ret;
@@ -2543,7 +2551,6 @@ static int img_rebase(int argc, char **argv)
             error_free(local_err);
             goto out;
         }
-        bs_old_backing = blk_bs(blk_old_backing);
 
         if (out_baseimg[0]) {
             if (out_basefmt) {
@@ -2562,7 +2569,6 @@ static int img_rebase(int argc, char **argv)
                 error_free(local_err);
                 goto out;
             }
-            bs_new_backing = blk_bs(blk_new_backing);
         }
     }
 
@@ -2585,17 +2591,17 @@ static int img_rebase(int argc, char **argv)
         uint8_t * buf_new;
         float local_progress = 0;
 
-        buf_old = qemu_blockalign(bs, IO_BUF_SIZE);
-        buf_new = qemu_blockalign(bs, IO_BUF_SIZE);
+        buf_old = blk_blockalign(blk, IO_BUF_SIZE);
+        buf_new = blk_blockalign(blk, IO_BUF_SIZE);
 
-        num_sectors = bdrv_nb_sectors(bs);
+        num_sectors = blk_getlength(blk);
         if (num_sectors < 0) {
             error_report("Could not get size of '%s': %s",
                          filename, strerror(-num_sectors));
             ret = -1;
             goto out;
         }
-        old_backing_num_sectors = bdrv_nb_sectors(bs_old_backing);
+        old_backing_num_sectors = blk_getlength(blk_old_backing);
         if (old_backing_num_sectors < 0) {
             char backing_name[PATH_MAX];
 
@@ -2605,14 +2611,20 @@ static int img_rebase(int argc, char **argv)
             ret = -1;
             goto out;
         }
-        if (bs_new_backing) {
-            new_backing_num_sectors = bdrv_nb_sectors(bs_new_backing);
+
+        num_sectors /= BDRV_SECTOR_SIZE;
+        old_backing_num_sectors /= BDRV_SECTOR_SIZE;
+
+        if (blk_new_backing) {
+            new_backing_num_sectors = blk_getlength(blk_new_backing);
             if (new_backing_num_sectors < 0) {
                 error_report("Could not get size of '%s': %s",
                              out_baseimg, strerror(-new_backing_num_sectors));
                 ret = -1;
                 goto out;
             }
+
+            new_backing_num_sectors /= BDRV_SECTOR_SIZE;
         }
 
         if (num_sectors != 0) {
@@ -2651,21 +2663,21 @@ static int img_rebase(int argc, char **argv)
                     n = old_backing_num_sectors - sector;
                 }
 
-                ret = bdrv_read(bs_old_backing, sector, buf_old, n);
+                ret = blk_read(blk_old_backing, sector, buf_old, n);
                 if (ret < 0) {
                     error_report("error while reading from old backing file");
                     goto out;
                 }
             }
 
-            if (sector >= new_backing_num_sectors || !bs_new_backing) {
+            if (sector >= new_backing_num_sectors || !blk_new_backing) {
                 memset(buf_new, 0, n * BDRV_SECTOR_SIZE);
             } else {
                 if (sector + n > new_backing_num_sectors) {
                     n = new_backing_num_sectors - sector;
                 }
 
-                ret = bdrv_read(bs_new_backing, sector, buf_new, n);
+                ret = blk_read(blk_new_backing, sector, buf_new, n);
                 if (ret < 0) {
                     error_report("error while reading from new backing file");
                     goto out;
@@ -2681,8 +2693,8 @@ static int img_rebase(int argc, char **argv)
                 if (compare_sectors(buf_old + written * 512,
                     buf_new + written * 512, n - written, &pnum))
                 {
-                    ret = bdrv_write(bs, sector + written,
-                        buf_old + written * 512, pnum);
+                    ret = blk_write(blk, sector + written,
+                                    buf_old + written * 512, pnum);
                     if (ret < 0) {
                         error_report("Error while writing to COW image: %s",
                             strerror(-ret));
@@ -2747,7 +2759,6 @@ static int img_resize(int argc, char **argv)
     int64_t n, total_size;
     bool quiet = false;
     BlockBackend *blk = NULL;
-    BlockDriverState *bs = NULL;
     QemuOpts *param;
     static QemuOptsList resize_options = {
         .name = "resize_options",
@@ -2829,10 +2840,9 @@ static int img_resize(int argc, char **argv)
         ret = -1;
         goto out;
     }
-    bs = blk_bs(blk);
 
     if (relative) {
-        total_size = bdrv_getlength(bs) + n * relative;
+        total_size = blk_getlength(blk) + n * relative;
     } else {
         total_size = n;
     }
@@ -2842,7 +2852,7 @@ static int img_resize(int argc, char **argv)
         goto out;
     }
 
-    ret = bdrv_truncate(bs, total_size);
+    ret = blk_truncate(blk, total_size);
     switch (ret) {
     case 0:
         qprintf(quiet, "Image resized.\n");
-- 
2.1.0

  parent reply	other threads:[~2015-01-26 15:01 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-26 15:00 [Qemu-devel] [PATCH v3 00/14] block: Remove "growable", add blk_new_open() Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 01/14] block: Lift some BDS functions to the BlockBackend Max Reitz
2015-01-26 21:48   ` Eric Blake
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 02/14] block: Add blk_new_open() Max Reitz
2015-01-26 21:56   ` Eric Blake
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 03/14] blockdev: Use blk_new_open() in blockdev_init() Max Reitz
2015-01-26 22:37   ` Eric Blake
2015-01-27  2:08     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 04/14] block/xen: Use blk_new_open() in blk_connect() Max Reitz
2015-01-26 22:46   ` Eric Blake
2015-02-02 18:27   ` Kevin Wolf
2015-02-02 19:41     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 05/14] qemu-img: Use blk_new_open() in img_open() Max Reitz
2015-01-26 22:47   ` Eric Blake
2015-02-02 18:35   ` Kevin Wolf
2015-02-02 19:42     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 06/14] qemu-img: Use blk_new_open() in img_rebase() Max Reitz
2015-01-27  3:05   ` Eric Blake
2015-01-27 15:01     ` Max Reitz
2015-02-02 19:00   ` Kevin Wolf
2015-02-02 19:47     ` Max Reitz
2015-01-26 15:00 ` Max Reitz [this message]
2015-01-27  3:38   ` [Qemu-devel] [PATCH v3 07/14] qemu-img: Use BlockBackend as far as possible Eric Blake
2015-01-27 15:07     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 08/14] qemu-nbd: Use blk_new_open() in main() Max Reitz
2015-01-27  4:59   ` Eric Blake
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 09/14] qemu-io: Use blk_new_open() in openfile() Max Reitz
2015-01-27 16:23   ` Eric Blake
2015-02-02 19:34   ` Kevin Wolf
2015-02-02 19:51     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 10/14] qemu-io: Remove "growable" option Max Reitz
2015-01-27 16:59   ` Eric Blake
2015-01-27 17:04     ` Max Reitz
2015-01-27 17:10       ` Eric Blake
2015-01-27 17:11         ` Max Reitz
2015-02-02 19:36           ` Kevin Wolf
2015-02-02 19:52             ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 11/14] qemu-io: Use BlockBackend Max Reitz
2015-01-27 17:08   ` Eric Blake
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 12/14] block: Clamp BlockBackend requests Max Reitz
2015-01-27 17:15   ` Eric Blake
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 13/14] block: Remove "growable" from BDS Max Reitz
2015-01-27 17:29   ` Eric Blake
2015-02-02 19:46   ` Kevin Wolf
2015-02-02 19:54     ` Max Reitz
2015-01-26 15:00 ` [Qemu-devel] [PATCH v3 14/14] block: Keep bdrv_check*_request()'s return value Max Reitz
2015-01-27 17:36   ` Eric Blake
2015-01-26 15:49 ` [Qemu-devel] [PATCH v3 00/14] block: Remove "growable", add blk_new_open() Stefano Stabellini
2015-02-02 19:50 ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422284444-12529-8-git-send-email-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=armbru@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=stefano.stabellini@eu.citrix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.