[PATCH 0/3] ASoC: atmel_ssc_dai: fix and refactor

[PATCH 0/3] ASoC: atmel_ssc_dai: fix and refactor

[Bo Shen]

This patch set do following things:
  - Fix the DSP mode A setting.
  - Refactor the startup and shutdown function.
  - Only clean PDC when use PDC.


Bo Shen (3):
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: atmel_ssc_dai: refactor the startup and shutdown
  ASoC: atmel_ssc_dai: only clean PDC when using PDC

 sound/soc/atmel/atmel_ssc_dai.c | 54 +++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

-- 
2.3.0.rc0

[PATCH 0/3] ASoC: atmel_ssc_dai: fix and refactor

[Bo Shen]

This patch set do following things:
  - Fix the DSP mode A setting.
  - Refactor the startup and shutdown function.
  - Only clean PDC when use PDC.


Bo Shen (3):
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: atmel_ssc_dai: refactor the startup and shutdown
  ASoC: atmel_ssc_dai: only clean PDC when using PDC

 sound/soc/atmel/atmel_ssc_dai.c | 54 +++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

-- 
2.3.0.rc0

[PATCH 0/3] ASoC: atmel_ssc_dai: fix and refactor

[Bo Shen]

This patch set do following things:
  - Fix the DSP mode A setting.
  - Refactor the startup and shutdown function.
  - Only clean PDC when use PDC.


Bo Shen (3):
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: atmel_ssc_dai: refactor the startup and shutdown
  ASoC: atmel_ssc_dai: only clean PDC when using PDC

 sound/soc/atmel/atmel_ssc_dai.c | 54 +++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

-- 
2.3.0.rc0

[PATCH 0/3] ASoC: atmel_ssc_dai: fix and refactor

[Bo Shen]

This patch set do following things:
  - Fix the DSP mode A setting.
  - Refactor the startup and shutdown function.
  - Only clean PDC when use PDC.


Bo Shen (3):
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: atmel_ssc_dai: refactor the startup and shutdown
  ASoC: atmel_ssc_dai: only clean PDC when using PDC

 sound/soc/atmel/atmel_ssc_dai.c | 54 +++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

-- 
2.3.0.rc0

[PATCH 1/3] ASoC: atmel_ssc_dai: fix the setting for DSP mode

[Bo Shen]

When SCC work in DSP A mode, the data outputs/inputs are shift out on
falling edge, the frame sync are sample on the rising edge.

Reported-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 99ff35e..c1d93b8 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -512,7 +512,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 			| SSC_BF(RCMR_STTDLY, 1)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 
@@ -527,7 +527,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 			| SSC_BF(TCMR_STTDLY, 1)
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 
@@ -556,7 +556,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
 			| SSC_BF(RCMR_STTDLY, START_DELAY)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 					   SSC_CKS_PIN : SSC_CKS_CLOCK);
-- 
2.3.0.rc0

[PATCH 1/3] ASoC: atmel_ssc_dai: fix the setting for DSP mode

[Bo Shen]

When SCC work in DSP A mode, the data outputs/inputs are shift out on
falling edge, the frame sync are sample on the rising edge.

Reported-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 99ff35e..c1d93b8 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -512,7 +512,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 			| SSC_BF(RCMR_STTDLY, 1)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 
@@ -527,7 +527,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 			| SSC_BF(TCMR_STTDLY, 1)
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 
@@ -556,7 +556,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
 			| SSC_BF(RCMR_STTDLY, START_DELAY)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 					   SSC_CKS_PIN : SSC_CKS_CLOCK);
-- 
2.3.0.rc0

[PATCH 1/3] ASoC: atmel_ssc_dai: fix the setting for DSP mode

[Bo Shen]

When SCC work in DSP A mode, the data outputs/inputs are shift out on
falling edge, the frame sync are sample on the rising edge.

Reported-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 99ff35e..c1d93b8 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -512,7 +512,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 			| SSC_BF(RCMR_STTDLY, 1)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 
@@ -527,7 +527,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 			| SSC_BF(TCMR_STTDLY, 1)
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 
@@ -556,7 +556,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
 			| SSC_BF(RCMR_STTDLY, START_DELAY)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 					   SSC_CKS_PIN : SSC_CKS_CLOCK);
-- 
2.3.0.rc0

[PATCH 1/3] ASoC: atmel_ssc_dai: fix the setting for DSP mode

[Bo Shen]

When SCC work in DSP A mode, the data outputs/inputs are shift out on
falling edge, the frame sync are sample on the rising edge.

Reported-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 99ff35e..c1d93b8 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -512,7 +512,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 			| SSC_BF(RCMR_STTDLY, 1)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 
@@ -527,7 +527,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 			| SSC_BF(TCMR_STTDLY, 1)
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 
@@ -556,7 +556,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
 			| SSC_BF(RCMR_STTDLY, START_DELAY)
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
-			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 					   SSC_CKS_PIN : SSC_CKS_CLOCK);
-- 
2.3.0.rc0

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

In startup function, enable ssc clock and in shutdown function,
disable clock. And also remove disable ssc in shutdown function,
as ssc is disabled in prepare function.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index c1d93b8..0ed5ac3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -204,6 +204,13 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
 	pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
 		ssc_readl(ssc_p->ssc->regs, SR));
 
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	clk_enable(ssc_p->ssc->clk);
+
+	/* Reset the SSC to keep it at a clean status */
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dir = 0;
 		dir_mask = SSC_DIR_MASK_PLAYBACK;
@@ -250,11 +257,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	dma_params = ssc_p->dma_params[dir];
 
 	if (dma_params != NULL) {
-		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
-		pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
-			(dir ? "receive" : "transmit"),
-			ssc_readl(ssc_p->ssc->regs, SR));
-
 		dma_params->ssc = NULL;
 		dma_params->substream = NULL;
 		ssc_p->dma_params[dir] = NULL;
@@ -266,10 +268,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	ssc_p->dir_mask &= ~dir_mask;
 	if (!ssc_p->dir_mask) {
 		if (ssc_p->initialized) {
-			/* Shutdown the SSC clock. */
-			pr_debug("atmel_ssc_dai: Stopping clock\n");
-			clk_disable(ssc_p->ssc->clk);
-
 			free_irq(ssc_p->ssc->irq, ssc_p);
 			ssc_p->initialized = 0;
 		}
@@ -280,6 +278,10 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
 	}
 	spin_unlock_irq(&ssc_p->lock);
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
 }
 
 
@@ -597,14 +599,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-
-		/* Enable PMC peripheral clock for this SSC */
-		pr_debug("atmel_ssc_dai: Starting clock\n");
-		clk_enable(ssc_p->ssc->clk);
-
-		/* Reset the SSC and its PDC registers */
-		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
 		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-- 
2.3.0.rc0

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

In startup function, enable ssc clock and in shutdown function,
disable clock. And also remove disable ssc in shutdown function,
as ssc is disabled in prepare function.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index c1d93b8..0ed5ac3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -204,6 +204,13 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
 	pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
 		ssc_readl(ssc_p->ssc->regs, SR));
 
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	clk_enable(ssc_p->ssc->clk);
+
+	/* Reset the SSC to keep it at a clean status */
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dir = 0;
 		dir_mask = SSC_DIR_MASK_PLAYBACK;
@@ -250,11 +257,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	dma_params = ssc_p->dma_params[dir];
 
 	if (dma_params != NULL) {
-		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
-		pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
-			(dir ? "receive" : "transmit"),
-			ssc_readl(ssc_p->ssc->regs, SR));
-
 		dma_params->ssc = NULL;
 		dma_params->substream = NULL;
 		ssc_p->dma_params[dir] = NULL;
@@ -266,10 +268,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	ssc_p->dir_mask &= ~dir_mask;
 	if (!ssc_p->dir_mask) {
 		if (ssc_p->initialized) {
-			/* Shutdown the SSC clock. */
-			pr_debug("atmel_ssc_dai: Stopping clock\n");
-			clk_disable(ssc_p->ssc->clk);
-
 			free_irq(ssc_p->ssc->irq, ssc_p);
 			ssc_p->initialized = 0;
 		}
@@ -280,6 +278,10 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
 	}
 	spin_unlock_irq(&ssc_p->lock);
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
 }
 
 
@@ -597,14 +599,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-
-		/* Enable PMC peripheral clock for this SSC */
-		pr_debug("atmel_ssc_dai: Starting clock\n");
-		clk_enable(ssc_p->ssc->clk);
-
-		/* Reset the SSC and its PDC registers */
-		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
 		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-- 
2.3.0.rc0

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

In startup function, enable ssc clock and in shutdown function,
disable clock. And also remove disable ssc in shutdown function,
as ssc is disabled in prepare function.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index c1d93b8..0ed5ac3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -204,6 +204,13 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
 	pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
 		ssc_readl(ssc_p->ssc->regs, SR));
 
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	clk_enable(ssc_p->ssc->clk);
+
+	/* Reset the SSC to keep it at a clean status */
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dir = 0;
 		dir_mask = SSC_DIR_MASK_PLAYBACK;
@@ -250,11 +257,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	dma_params = ssc_p->dma_params[dir];
 
 	if (dma_params != NULL) {
-		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
-		pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
-			(dir ? "receive" : "transmit"),
-			ssc_readl(ssc_p->ssc->regs, SR));
-
 		dma_params->ssc = NULL;
 		dma_params->substream = NULL;
 		ssc_p->dma_params[dir] = NULL;
@@ -266,10 +268,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	ssc_p->dir_mask &= ~dir_mask;
 	if (!ssc_p->dir_mask) {
 		if (ssc_p->initialized) {
-			/* Shutdown the SSC clock. */
-			pr_debug("atmel_ssc_dai: Stopping clock\n");
-			clk_disable(ssc_p->ssc->clk);
-
 			free_irq(ssc_p->ssc->irq, ssc_p);
 			ssc_p->initialized = 0;
 		}
@@ -280,6 +278,10 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
 	}
 	spin_unlock_irq(&ssc_p->lock);
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
 }
 
 
@@ -597,14 +599,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-
-		/* Enable PMC peripheral clock for this SSC */
-		pr_debug("atmel_ssc_dai: Starting clock\n");
-		clk_enable(ssc_p->ssc->clk);
-
-		/* Reset the SSC and its PDC registers */
-		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
 		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-- 
2.3.0.rc0

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

In startup function, enable ssc clock and in shutdown function,
disable clock. And also remove disable ssc in shutdown function,
as ssc is disabled in prepare function.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index c1d93b8..0ed5ac3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -204,6 +204,13 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
 	pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
 		ssc_readl(ssc_p->ssc->regs, SR));
 
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	clk_enable(ssc_p->ssc->clk);
+
+	/* Reset the SSC to keep it at a clean status */
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
 	if (substream->stream = SNDRV_PCM_STREAM_PLAYBACK) {
 		dir = 0;
 		dir_mask = SSC_DIR_MASK_PLAYBACK;
@@ -250,11 +257,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	dma_params = ssc_p->dma_params[dir];
 
 	if (dma_params != NULL) {
-		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
-		pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
-			(dir ? "receive" : "transmit"),
-			ssc_readl(ssc_p->ssc->regs, SR));
-
 		dma_params->ssc = NULL;
 		dma_params->substream = NULL;
 		ssc_p->dma_params[dir] = NULL;
@@ -266,10 +268,6 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 	ssc_p->dir_mask &= ~dir_mask;
 	if (!ssc_p->dir_mask) {
 		if (ssc_p->initialized) {
-			/* Shutdown the SSC clock. */
-			pr_debug("atmel_ssc_dai: Stopping clock\n");
-			clk_disable(ssc_p->ssc->clk);
-
 			free_irq(ssc_p->ssc->irq, ssc_p);
 			ssc_p->initialized = 0;
 		}
@@ -280,6 +278,10 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
 	}
 	spin_unlock_irq(&ssc_p->lock);
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
 }
 
 
@@ -597,14 +599,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-
-		/* Enable PMC peripheral clock for this SSC */
-		pr_debug("atmel_ssc_dai: Starting clock\n");
-		clk_enable(ssc_p->ssc->clk);
-
-		/* Reset the SSC and its PDC registers */
-		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
 		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
 		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-- 
2.3.0.rc0

[PATCH 3/3] ASoC: atmel_ssc_dai: only clean PDC when using PDC

[Bo Shen]

Only using PDC, it needs to clean PDC registers.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 0ed5ac3..80eb1f1 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -599,15 +599,17 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
-		ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
 
 		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
 				ssc_p->name, ssc_p);
-- 
2.3.0.rc0

[PATCH 3/3] ASoC: atmel_ssc_dai: only clean PDC when using PDC

[Bo Shen]

Only using PDC, it needs to clean PDC registers.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 0ed5ac3..80eb1f1 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -599,15 +599,17 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
-		ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
 
 		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
 				ssc_p->name, ssc_p);
-- 
2.3.0.rc0

[PATCH 3/3] ASoC: atmel_ssc_dai: only clean PDC when using PDC

[Bo Shen]

Only using PDC, it needs to clean PDC registers.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 0ed5ac3..80eb1f1 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -599,15 +599,17 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
-		ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
 
 		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
 				ssc_p->name, ssc_p);
-- 
2.3.0.rc0

[PATCH 3/3] ASoC: atmel_ssc_dai: only clean PDC when using PDC

[Bo Shen]

Only using PDC, it needs to clean PDC registers.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---

 sound/soc/atmel/atmel_ssc_dai.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 0ed5ac3..80eb1f1 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -599,15 +599,17 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			rcmr, rfmr, tcmr, tfmr);
 
 	if (!ssc_p->initialized) {
-		ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
-		ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
-		ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
 
 		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
 				ssc_p->name, ssc_p);
-- 
2.3.0.rc0

Re: [PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 337 bytes --]

On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
> In startup function, enable ssc clock and in shutdown function,
> disable clock. And also remove disable ssc in shutdown function,
> as ssc is disabled in prepare function.

Applied, thanks.  You probably want to convert to clk_prepare_enable()
too but that's a separate thing.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Mark Brown]

On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
> In startup function, enable ssc clock and in shutdown function,
> disable clock. And also remove disable ssc in shutdown function,
> as ssc is disabled in prepare function.

Applied, thanks.  You probably want to convert to clk_prepare_enable()
too but that's a separate thing.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150130/55eb30de/attachment.sig>

Re: [PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 337 bytes --]

On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
> In startup function, enable ssc clock and in shutdown function,
> disable clock. And also remove disable ssc in shutdown function,
> as ssc is disabled in prepare function.

Applied, thanks.  You probably want to convert to clk_prepare_enable()
too but that's a separate thing.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

Hi Mark,

On 01/30/2015 09:20 PM, Mark Brown wrote:
> On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
>> In startup function, enable ssc clock and in shutdown function,
>> disable clock. And also remove disable ssc in shutdown function,
>> as ssc is disabled in prepare function.
>
> Applied, thanks.  You probably want to convert to clk_prepare_enable()
> too but that's a separate thing.

OK, thanks, I will check that. As now, we prepare clock in ssc driver, 
then enable it in dai driver.

Best Regards,
Bo Shen

Re: [PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

Hi Mark,

On 01/30/2015 09:20 PM, Mark Brown wrote:
> On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
>> In startup function, enable ssc clock and in shutdown function,
>> disable clock. And also remove disable ssc in shutdown function,
>> as ssc is disabled in prepare function.
>
> Applied, thanks.  You probably want to convert to clk_prepare_enable()
> too but that's a separate thing.

OK, thanks, I will check that. As now, we prepare clock in ssc driver, 
then enable it in dai driver.

Best Regards,
Bo Shen

[PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

Hi Mark,

On 01/30/2015 09:20 PM, Mark Brown wrote:
> On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
>> In startup function, enable ssc clock and in shutdown function,
>> disable clock. And also remove disable ssc in shutdown function,
>> as ssc is disabled in prepare function.
>
> Applied, thanks.  You probably want to convert to clk_prepare_enable()
> too but that's a separate thing.

OK, thanks, I will check that. As now, we prepare clock in ssc driver, 
then enable it in dai driver.

Best Regards,
Bo Shen

Re: [PATCH 2/3] ASoC: atmel_ssc_dai: refactor the startup and shutdown

[Bo Shen]

Hi Mark,

On 01/30/2015 09:20 PM, Mark Brown wrote:
> On Fri, Jan 30, 2015 at 05:38:43PM +0800, Bo Shen wrote:
>> In startup function, enable ssc clock and in shutdown function,
>> disable clock. And also remove disable ssc in shutdown function,
>> as ssc is disabled in prepare function.
>
> Applied, thanks.  You probably want to convert to clk_prepare_enable()
> too but that's a separate thing.

OK, thanks, I will check that. As now, we prepare clock in ssc driver, 
then enable it in dai driver.

Best Regards,
Bo Shen