* [PATCH 0/2] clk: qcom: gcc: Add support to child devices. @ 2015-01-30 9:50 Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 9:50 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patchset adds support to child devices whose memory registers fall insider gcc memory map. For example on APQ8064 whose thermal sensor registers are inside gcc memory range. Thanks, srini Srinivas Kandagatla (2): clk: qcom: gcc-msm8960: add child devices support. clk: qcom: gcc bindings: Update to add child node support. Documentation/devicetree/bindings/clock/qcom,gcc.txt | 5 +++++ drivers/clk/qcom/gcc-msm8960.c | 7 ++++++- 2 files changed, 11 insertions(+), 1 deletion(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 9:50 [PATCH 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla @ 2015-01-30 9:51 ` Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla 2015-01-30 10:16 ` [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2 siblings, 0 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 9:51 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patch adds support to add child devices to gcc as some of the registers mapped by gcc are used by drivers like thermal sensors. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/clk/qcom/gcc-msm8960.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index 0cd3e26..2315b64 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -3677,12 +3678,16 @@ static int gcc_msm8960_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - return qcom_cc_probe(pdev, match->data); + qcom_cc_probe(pdev, match->data); + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); } static int gcc_msm8960_remove(struct platform_device *pdev) { qcom_cc_remove(pdev); + of_platform_depopulate(&pdev->dev); + return 0; } -- 1.9.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/2] clk: qcom: gcc bindings: Update to add child node support. 2015-01-30 9:50 [PATCH 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla @ 2015-01-30 9:51 ` Srinivas Kandagatla 2015-01-30 10:16 ` [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2 siblings, 0 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 9:51 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patch adds note in the bindings about the optional child nodes which are currently possible with SOCs like MSM8960, APQ8064. These child device nodes are typically for drivers like thermal sensor which fall under the memory-map of gcc. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- Documentation/devicetree/bindings/clock/qcom,gcc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d25..c79225b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -17,6 +17,11 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional child nodes: + Child nodes could be any device nodes with its own bindings which + fall inside the memory-map of the Clock controller, for example + thermal sensor driver. + Example: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices. 2015-01-30 9:50 [PATCH 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla @ 2015-01-30 10:16 ` Srinivas Kandagatla 2015-01-30 10:17 ` [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla 2015-01-30 10:18 ` [PATCH v2 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla 2 siblings, 2 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 10:16 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patchset adds support to child devices whose memory registers fall insider gcc memory map. For example on APQ8064 whose thermal sensor registers are inside gcc memory range. Changes since v1: - Check return value of qcom_cc_probe spotted by Pramod. Thanks, srini Srinivas Kandagatla (2): clk: qcom: gcc-msm8960: add child devices support. clk: qcom: gcc bindings: Update to add child node support. Documentation/devicetree/bindings/clock/qcom,gcc.txt | 5 +++++ drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- 2 files changed, 14 insertions(+), 1 deletion(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 10:16 ` [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla @ 2015-01-30 10:17 ` Srinivas Kandagatla 2015-01-30 16:57 ` Bjorn Andersson 2015-01-30 10:18 ` [PATCH v2 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla 1 sibling, 1 reply; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 10:17 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patch adds support to add child devices to gcc as some of the registers mapped by gcc are used by drivers like thermal sensors. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index 0cd3e26..3ba77c5 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -3658,6 +3659,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev) struct clk *clk; struct device *dev = &pdev->dev; const struct of_device_id *match; + int ret; match = of_match_device(gcc_msm8960_match_table, &pdev->dev); if (!match) @@ -3677,12 +3679,18 @@ static int gcc_msm8960_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - return qcom_cc_probe(pdev, match->data); + ret = qcom_cc_probe(pdev, match->data); + if (ret) + return ret; + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); } static int gcc_msm8960_remove(struct platform_device *pdev) { qcom_cc_remove(pdev); + of_platform_depopulate(&pdev->dev); + return 0; } -- 1.9.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 10:17 ` [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla @ 2015-01-30 16:57 ` Bjorn Andersson 2015-01-30 18:06 ` Srinivas Kandagatla 0 siblings, 1 reply; 13+ messages in thread From: Bjorn Andersson @ 2015-01-30 16:57 UTC (permalink / raw) To: Srinivas Kandagatla Cc: Mike Turquette, Stephen Boyd, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Arnd Bergmann On Fri, Jan 30, 2015 at 2:17 AM, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> wrote: > This patch adds support to add child devices to gcc as some of the > registers mapped by gcc are used by drivers like thermal sensors. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c > index 0cd3e26..3ba77c5 100644 > --- a/drivers/clk/qcom/gcc-msm8960.c > +++ b/drivers/clk/qcom/gcc-msm8960.c > @@ -15,6 +15,7 @@ > #include <linux/bitops.h> > #include <linux/err.h> > #include <linux/platform_device.h> > +#include <linux/of_platform.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > @@ -3658,6 +3659,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev) > struct clk *clk; > struct device *dev = &pdev->dev; > const struct of_device_id *match; > + int ret; > > match = of_match_device(gcc_msm8960_match_table, &pdev->dev); > if (!match) > @@ -3677,12 +3679,18 @@ static int gcc_msm8960_probe(struct platform_device *pdev) > if (IS_ERR(clk)) > return PTR_ERR(clk); > > - return qcom_cc_probe(pdev, match->data); > + ret = qcom_cc_probe(pdev, match->data); > + if (ret) > + return ret; > + > + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); How about calling of_syscon_register() instead? That would give us a handle to a regmap that can be consumed in e.g. the thermal driver. I think this use case is exactly why that was introduced. Regards, Bjorn ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 16:57 ` Bjorn Andersson @ 2015-01-30 18:06 ` Srinivas Kandagatla 2015-01-30 21:16 ` Stephen Boyd 0 siblings, 1 reply; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 18:06 UTC (permalink / raw) To: Bjorn Andersson Cc: Mike Turquette, Stephen Boyd, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Arnd Bergmann On 30/01/15 16:57, Bjorn Andersson wrote: > On Fri, Jan 30, 2015 at 2:17 AM, Srinivas Kandagatla > <srinivas.kandagatla@linaro.org> wrote: >> This patch adds support to add child devices to gcc as some of the >> registers mapped by gcc are used by drivers like thermal sensors. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- >> 1 file changed, 9 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c >> index 0cd3e26..3ba77c5 100644 >> --- a/drivers/clk/qcom/gcc-msm8960.c >> +++ b/drivers/clk/qcom/gcc-msm8960.c >> @@ -15,6 +15,7 @@ >> #include <linux/bitops.h> >> #include <linux/err.h> >> #include <linux/platform_device.h> >> +#include <linux/of_platform.h> >> #include <linux/module.h> >> #include <linux/of.h> >> #include <linux/of_device.h> >> @@ -3658,6 +3659,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev) >> struct clk *clk; >> struct device *dev = &pdev->dev; >> const struct of_device_id *match; >> + int ret; >> >> match = of_match_device(gcc_msm8960_match_table, &pdev->dev); >> if (!match) >> @@ -3677,12 +3679,18 @@ static int gcc_msm8960_probe(struct platform_device *pdev) >> if (IS_ERR(clk)) >> return PTR_ERR(clk); >> >> - return qcom_cc_probe(pdev, match->data); >> + ret = qcom_cc_probe(pdev, match->data); >> + if (ret) >> + return ret; >> + >> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); > > How about calling of_syscon_register() instead? That would give us a > handle to a regmap that can be consumed in e.g. the thermal driver. Two things: - Are you sure, this looks like of_syscon_register() is a static function - gcc node would be required to add "syscon" compatible Unless am missing some patches, Am not sure if going via syscon is right thing here? Stephen Any comments? --srini > > I think this use case is exactly why that was introduced. > > Regards, > Bjorn > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 18:06 ` Srinivas Kandagatla @ 2015-01-30 21:16 ` Stephen Boyd [not found] ` <54CBF4B4.6080208-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 2015-02-03 10:44 ` Srinivas Kandagatla 0 siblings, 2 replies; 13+ messages in thread From: Stephen Boyd @ 2015-01-30 21:16 UTC (permalink / raw) To: Srinivas Kandagatla, Bjorn Andersson Cc: Mike Turquette, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Arnd Bergmann On 01/30/15 10:06, Srinivas Kandagatla wrote: > > > On 30/01/15 16:57, Bjorn Andersson wrote: >> On Fri, Jan 30, 2015 at 2:17 AM, Srinivas Kandagatla >> <srinivas.kandagatla@linaro.org> wrote: >>> This patch adds support to add child devices to gcc as some of the >>> registers mapped by gcc are used by drivers like thermal sensors. >>> >>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >>> --- >>> drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- >>> 1 file changed, 9 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/clk/qcom/gcc-msm8960.c >>> b/drivers/clk/qcom/gcc-msm8960.c >>> index 0cd3e26..3ba77c5 100644 >>> --- a/drivers/clk/qcom/gcc-msm8960.c >>> +++ b/drivers/clk/qcom/gcc-msm8960.c >>> @@ -15,6 +15,7 @@ >>> #include <linux/bitops.h> >>> #include <linux/err.h> >>> #include <linux/platform_device.h> >>> +#include <linux/of_platform.h> >>> #include <linux/module.h> >>> #include <linux/of.h> >>> #include <linux/of_device.h> >>> @@ -3658,6 +3659,7 @@ static int gcc_msm8960_probe(struct >>> platform_device *pdev) >>> struct clk *clk; >>> struct device *dev = &pdev->dev; >>> const struct of_device_id *match; >>> + int ret; >>> >>> match = of_match_device(gcc_msm8960_match_table, &pdev->dev); >>> if (!match) >>> @@ -3677,12 +3679,18 @@ static int gcc_msm8960_probe(struct >>> platform_device *pdev) >>> if (IS_ERR(clk)) >>> return PTR_ERR(clk); >>> >>> - return qcom_cc_probe(pdev, match->data); >>> + ret = qcom_cc_probe(pdev, match->data); >>> + if (ret) >>> + return ret; >>> + >>> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, >>> &pdev->dev); >> >> How about calling of_syscon_register() instead? That would give us a >> handle to a regmap that can be consumed in e.g. the thermal driver. > > Two things: > - Are you sure, this looks like of_syscon_register() is a static function > - gcc node would be required to add "syscon" compatible > > Unless am missing some patches, Am not sure if going via syscon is > right thing here? > > Stephen Any comments? I don't understand any of this. We should be making a specific tsens device directly in the gcc driver probe and not doing any sort of of_platform_populate(). This is what I had, but it probably could be done better so that we can assign the struct device's of_node pointer before registering on the platform bus. platform_device_register_data(&pdev->dev, "tsens8960-tm", -1, &pdev->dev.of_node, sizeof(&pdev->dev.of_node)); Then if we need to add any properties like #sensor-cells or coefficients the tsens driver can use the same of_node that gcc is using. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <54CBF4B4.6080208-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 21:16 ` Stephen Boyd @ 2015-01-30 22:00 ` Bjorn Andersson 2015-02-03 10:44 ` Srinivas Kandagatla 1 sibling, 0 replies; 13+ messages in thread From: Bjorn Andersson @ 2015-01-30 22:00 UTC (permalink / raw) To: Stephen Boyd Cc: Srinivas Kandagatla, Mike Turquette, Rob Herring, Kumar Gala, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm, Eduardo Valentin, nrajan-sgV2jX0FEOLY0TyS/+Ba5Q, Arnd Bergmann On Fri, Jan 30, 2015 at 1:16 PM, Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote: > On 01/30/15 10:06, Srinivas Kandagatla wrote: [..] >> Stephen Any comments? > > I don't understand any of this. We should be making a specific tsens > device directly in the gcc driver probe and not doing any sort of > of_platform_populate(). This is what I had, but it probably could be > done better so that we can assign the struct device's of_node pointer > before registering on the platform bus. > > platform_device_register_data(&pdev->dev, "tsens8960-tm", -1, > &pdev->dev.of_node, sizeof(&pdev->dev.of_node)); > > Then if we need to add any properties like #sensor-cells or coefficients > the tsens driver can use the same of_node that gcc is using. > That makes sense and the dt will describe the hardware nicely, but how do you get access to the register space from the tsens driver? Will dev_get_regmap(pdev->dev.parent, NULL); find the mmio regmap of gcc perhaps? Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. @ 2015-01-30 22:00 ` Bjorn Andersson 0 siblings, 0 replies; 13+ messages in thread From: Bjorn Andersson @ 2015-01-30 22:00 UTC (permalink / raw) To: Stephen Boyd Cc: Srinivas Kandagatla, Mike Turquette, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, Eduardo Valentin, nrajan, Arnd Bergmann On Fri, Jan 30, 2015 at 1:16 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: > On 01/30/15 10:06, Srinivas Kandagatla wrote: [..] >> Stephen Any comments? > > I don't understand any of this. We should be making a specific tsens > device directly in the gcc driver probe and not doing any sort of > of_platform_populate(). This is what I had, but it probably could be > done better so that we can assign the struct device's of_node pointer > before registering on the platform bus. > > platform_device_register_data(&pdev->dev, "tsens8960-tm", -1, > &pdev->dev.of_node, sizeof(&pdev->dev.of_node)); > > Then if we need to add any properties like #sensor-cells or coefficients > the tsens driver can use the same of_node that gcc is using. > That makes sense and the dt will describe the hardware nicely, but how do you get access to the register space from the tsens driver? Will dev_get_regmap(pdev->dev.parent, NULL); find the mmio regmap of gcc perhaps? Regards, Bjorn ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 22:00 ` Bjorn Andersson (?) @ 2015-01-30 22:03 ` Stephen Boyd -1 siblings, 0 replies; 13+ messages in thread From: Stephen Boyd @ 2015-01-30 22:03 UTC (permalink / raw) To: Bjorn Andersson Cc: Srinivas Kandagatla, Mike Turquette, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, Eduardo Valentin, nrajan, Arnd Bergmann On 01/30/15 14:00, Bjorn Andersson wrote: > On Fri, Jan 30, 2015 at 1:16 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: >> On 01/30/15 10:06, Srinivas Kandagatla wrote: > [..] >>> Stephen Any comments? >> I don't understand any of this. We should be making a specific tsens >> device directly in the gcc driver probe and not doing any sort of >> of_platform_populate(). This is what I had, but it probably could be >> done better so that we can assign the struct device's of_node pointer >> before registering on the platform bus. >> >> platform_device_register_data(&pdev->dev, "tsens8960-tm", -1, >> &pdev->dev.of_node, sizeof(&pdev->dev.of_node)); >> >> Then if we need to add any properties like #sensor-cells or coefficients >> the tsens driver can use the same of_node that gcc is using. >> > That makes sense and the dt will describe the hardware nicely, but how > do you get access to the register space from the tsens driver? > > Will dev_get_regmap(pdev->dev.parent, NULL); find the mmio regmap of > gcc perhaps? > Yes that's the plan. We'll have to do slightly different stuff for 8974 where tsens is split out from gcc into its own space. That should still be easy enough though by checking the of_node against some compatible string. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support. 2015-01-30 21:16 ` Stephen Boyd [not found] ` <54CBF4B4.6080208-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2015-02-03 10:44 ` Srinivas Kandagatla 1 sibling, 0 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-02-03 10:44 UTC (permalink / raw) To: Stephen Boyd, Bjorn Andersson Cc: Mike Turquette, Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Arnd Bergmann On 30/01/15 21:16, Stephen Boyd wrote: > On 01/30/15 10:06, Srinivas Kandagatla wrote: >> >> >> On 30/01/15 16:57, Bjorn Andersson wrote: >>> On Fri, Jan 30, 2015 at 2:17 AM, Srinivas Kandagatla >>> <srinivas.kandagatla@linaro.org> wrote: >>>> This patch adds support to add child devices to gcc as some of the >>>> registers mapped by gcc are used by drivers like thermal sensors. >>>> >>>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >>>> --- >>>> drivers/clk/qcom/gcc-msm8960.c | 10 +++++++++- >>>> 1 file changed, 9 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/clk/qcom/gcc-msm8960.c >>>> b/drivers/clk/qcom/gcc-msm8960.c >>>> index 0cd3e26..3ba77c5 100644 >>>> --- a/drivers/clk/qcom/gcc-msm8960.c >>>> +++ b/drivers/clk/qcom/gcc-msm8960.c >>>> @@ -15,6 +15,7 @@ >>>> #include <linux/bitops.h> >>>> #include <linux/err.h> >>>> #include <linux/platform_device.h> >>>> +#include <linux/of_platform.h> >>>> #include <linux/module.h> >>>> #include <linux/of.h> >>>> #include <linux/of_device.h> >>>> @@ -3658,6 +3659,7 @@ static int gcc_msm8960_probe(struct >>>> platform_device *pdev) >>>> struct clk *clk; >>>> struct device *dev = &pdev->dev; >>>> const struct of_device_id *match; >>>> + int ret; >>>> >>>> match = of_match_device(gcc_msm8960_match_table, &pdev->dev); >>>> if (!match) >>>> @@ -3677,12 +3679,18 @@ static int gcc_msm8960_probe(struct >>>> platform_device *pdev) >>>> if (IS_ERR(clk)) >>>> return PTR_ERR(clk); >>>> >>>> - return qcom_cc_probe(pdev, match->data); >>>> + ret = qcom_cc_probe(pdev, match->data); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, >>>> &pdev->dev); >>> >>> How about calling of_syscon_register() instead? That would give us a >>> handle to a regmap that can be consumed in e.g. the thermal driver. >> >> Two things: >> - Are you sure, this looks like of_syscon_register() is a static function >> - gcc node would be required to add "syscon" compatible >> >> Unless am missing some patches, Am not sure if going via syscon is >> right thing here? >> >> Stephen Any comments? > > I don't understand any of this. We should be making a specific tsens > device directly in the gcc driver probe and not doing any sort of > of_platform_populate(). This is what I had, but it probably could be > done better so that we can assign the struct device's of_node pointer > before registering on the platform bus. > > platform_device_register_data(&pdev->dev, "tsens8960-tm", -1, > &pdev->dev.of_node, sizeof(&pdev->dev.of_node)); > Yes this would work too, What are the advantages of doing this way over the other? Except the fact that gcc and tsens do not have parent child relation in hw p.o.v . If I get all this correct, we do not want to add a parent child hierarchy in DT, but we are Ok doing that inside the gcc driver, that seem not correct. TBH, All this looks bit fiddly, for below reasons - we re going to have a consolidated bindings for two different drivers gcc and tsens. - Passing of_node as data to other drivers. On the other hand can't we move a level up and make the common resource a syscon node and let both gcc and tsens drivers access it? Which I think tsens originally attempted doing :-) ?? --srini > Then if we need to add any properties like #sensor-cells or coefficients > the tsens driver can use the same of_node that gcc is using. > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v2 2/2] clk: qcom: gcc bindings: Update to add child node support. 2015-01-30 10:16 ` [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2015-01-30 10:17 ` [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla @ 2015-01-30 10:18 ` Srinivas Kandagatla 1 sibling, 0 replies; 13+ messages in thread From: Srinivas Kandagatla @ 2015-01-30 10:18 UTC (permalink / raw) To: Mike Turquette, Stephen Boyd Cc: Rob Herring, Kumar Gala, devicetree, linux-kernel, linux-arm-msm, edubezval, nrajan, Srinivas Kandagatla This patch adds note in the bindings about the optional child nodes which are currently possible with SOCs like MSM8960, APQ8064. These child device nodes are typically for drivers like thermal sensor which fall under the memory-map of gcc. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- Documentation/devicetree/bindings/clock/qcom,gcc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d25..c79225b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -17,6 +17,11 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional child nodes: + Child nodes could be any device nodes with its own bindings which + fall inside the memory-map of the Clock controller, for example + thermal sensor driver. + Example: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-02-03 10:44 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-01-30 9:50 [PATCH 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla 2015-01-30 9:51 ` [PATCH 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla 2015-01-30 10:16 ` [PATCH v2 0/2] clk: qcom: gcc: Add support to child devices Srinivas Kandagatla 2015-01-30 10:17 ` [PATCH v2 1/2] clk: qcom: gcc-msm8960: add child devices support Srinivas Kandagatla 2015-01-30 16:57 ` Bjorn Andersson 2015-01-30 18:06 ` Srinivas Kandagatla 2015-01-30 21:16 ` Stephen Boyd [not found] ` <54CBF4B4.6080208-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 2015-01-30 22:00 ` Bjorn Andersson 2015-01-30 22:00 ` Bjorn Andersson 2015-01-30 22:03 ` Stephen Boyd 2015-02-03 10:44 ` Srinivas Kandagatla 2015-01-30 10:18 ` [PATCH v2 2/2] clk: qcom: gcc bindings: Update to add child node support Srinivas Kandagatla
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.