[U-Boot] [PATCH 0/2] ARMv8: driver model enable

[U-Boot] [PATCH 0/2] ARMv8: driver model enable

[fenghua at phytium.com.cn]

From: David Feng <fenghua@phytium.com.cn>

Currently serial_pl01x.c driver contain DM and non-DM mode,
but it will access static varible in non-DM mode.
So, u-boot using non-DM pl01x driver can not be placed in flash.
This patch set enable pre-allocation malloc that is required by DM
and enable DM in vexpress64 board.

David Feng (2):
  ARMv8: enable pre-allocation malloc
  ARMv8: enable DM in vexpress64 board

 arch/arm/include/asm/config.h        |    4 ----
 arch/arm/lib/crt0_64.S               |   13 +++++++++++--
 board/armltd/vexpress64/vexpress64.c |   13 +++++++++++++
 include/configs/vexpress_aemv8a.h    |   14 ++++++++++++--
 4 files changed, 36 insertions(+), 8 deletions(-)

-- 
1.7.9.5

[U-Boot] [PATCH 1/2] ARMv8: enable pre-allocation malloc

[fenghua at phytium.com.cn]

From: David Feng <fenghua@phytium.com.cn>

Allocate memory space for pre-allocation malloc and zero global data.
This code is partly from crt0.S.

Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
 arch/arm/include/asm/config.h |    4 ----
 arch/arm/lib/crt0_64.S        |   13 +++++++++++--
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index be80434..7a34a01 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -7,10 +7,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-#ifdef __aarch64__
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-#endif
-
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index 7756396..1654011 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -62,9 +62,18 @@ ENTRY(_main)
  * Set up initial C runtime environment and call board_init_f(0).
  */
 	ldr	x0, =(CONFIG_SYS_INIT_SP_ADDR)
-	sub	x0, x0, #GD_SIZE	/* allocate one GD above SP */
+	sub	x18, x0, #GD_SIZE	/* allocate one GD above SP */
+	bic	x18, x18, #0x7		/* 8-byte alignment for GD */
+zero_gd:
+	sub	x0, x0, #0x8
+	str	xzr, [x0]
+	cmp	x0, x18
+	b.gt	zero_gd
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+	sub	x0, x18, #CONFIG_SYS_MALLOC_F_LEN
+	str	x0, [x18, #GD_MALLOC_BASE]
+#endif
 	bic	sp, x0, #0xf	/* 16-byte alignment for ABI compliance */
-	mov	x18, sp			/* GD is above SP */
 	mov	x0, #0
 	bl	board_init_f
 
-- 
1.7.9.5

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[fenghua at phytium.com.cn]

From: David Feng <fenghua@phytium.com.cn>

Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
 board/armltd/vexpress64/vexpress64.c |   13 +++++++++++++
 include/configs/vexpress_aemv8a.h    |   14 ++++++++++++--
 2 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 5897318..4171c6e 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -12,9 +12,22 @@
 #include <asm/io.h>
 #include <linux/compiler.h>
 #include <asm/semihosting.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_pl01x.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const struct pl01x_serial_platdata serial_platdata = {
+	.base = V2M_UART0,
+	.type = TYPE_PL011,
+	.clock = 2400 * 1000,
+};
+
+U_BOOT_DEVICE(vexpress_serials) = {
+	.name = "serial_pl01x",
+	.platdata = &serial_platdata,
+};
+
 int board_init(void)
 {
 	return 0;
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 027d78b..9b31c2d 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -8,6 +8,8 @@
 #ifndef __VEXPRESS_AEMV8A_H
 #define __VEXPRESS_AEMV8A_H
 
+#define CONFIG_DM
+
 /* We use generic board for v8 Versatile Express */
 #define CONFIG_SYS_GENERIC_BOARD
 
@@ -52,7 +54,6 @@
 /* Flat Device Tree Definitions */
 #define CONFIG_OF_LIBFDT
 
-
 /* SMP Spin Table Definitions */
 #ifdef CONFIG_BASE_FVP
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
@@ -132,6 +133,7 @@
 #define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)
 
 /* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_F_LEN		0x2000
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))
 
 /* SMSC91C111 Ethernet Configuration */
@@ -139,11 +141,19 @@
 #define CONFIG_SMC91111_BASE		(0x01A000000)
 
 /* PL011 Serial Configuration */
+#define CONFIG_BAUDRATE			115200
+#ifdef CONFIG_DM
+#define CONFIG_DM_SERIAL
+#define CONFIG_PL01X_SERIAL
+#else
+#define CONFIG_SYS_SERIAL0		V2M_UART0
+#define CONFIG_SYS_SERIAL1		V2M_UART1
+#define CONFIG_CONS_INDEX		0
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
 					 (void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_CONS_INDEX		0
+#endif
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_SERIAL0		V2M_UART0
-- 
1.7.9.5

[U-Boot] [PATCH 1/2] ARMv8: enable pre-allocation malloc

[Albert ARIBAUD]

Hello fenghua at phytium.com.cn,

On Sat, 31 Jan 2015 11:55:28 +0800, fenghua at phytium.com.cn <fenghua@phytium.com.cn> wrote:
> From: David Feng <fenghua@phytium.com.cn>
> 
> Allocate memory space for pre-allocation malloc and zero global data.
> This code is partly from crt0.S.
> 
> Signed-off-by: David Feng <fenghua@phytium.com.cn>
> ---
>  arch/arm/include/asm/config.h |    4 ----
>  arch/arm/lib/crt0_64.S        |   13 +++++++++++--
>  2 files changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
> index be80434..7a34a01 100644
> --- a/arch/arm/include/asm/config.h
> +++ b/arch/arm/include/asm/config.h
> @@ -7,10 +7,6 @@
>  #ifndef _ASM_CONFIG_H_
>  #define _ASM_CONFIG_H_
>  
> -#ifdef __aarch64__
> -#define CONFIG_SYS_GENERIC_GLOBAL_DATA
> -#endif
> -
>  #define CONFIG_LMB
>  #define CONFIG_SYS_BOOT_RAMDISK_HIGH
>  
> diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
> index 7756396..1654011 100644
> --- a/arch/arm/lib/crt0_64.S
> +++ b/arch/arm/lib/crt0_64.S
> @@ -62,9 +62,18 @@ ENTRY(_main)
>   * Set up initial C runtime environment and call board_init_f(0).
>   */
>  	ldr	x0, =(CONFIG_SYS_INIT_SP_ADDR)
> -	sub	x0, x0, #GD_SIZE	/* allocate one GD above SP */
> +	sub	x18, x0, #GD_SIZE	/* allocate one GD above SP */
> +	bic	x18, x18, #0x7		/* 8-byte alignment for GD */
> +zero_gd:
> +	sub	x0, x0, #0x8
> +	str	xzr, [x0]
> +	cmp	x0, x18
> +	b.gt	zero_gd
> +#if defined(CONFIG_SYS_MALLOC_F_LEN)
> +	sub	x0, x18, #CONFIG_SYS_MALLOC_F_LEN
> +	str	x0, [x18, #GD_MALLOC_BASE]
> +#endif
>  	bic	sp, x0, #0xf	/* 16-byte alignment for ABI compliance */
> -	mov	x18, sp			/* GD is above SP */
>  	mov	x0, #0
>  	bl	board_init_f
>  
> -- 
> 1.7.9.5
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Albert ARIBAUD]

Hello fenghua at phytium.com.cn,

On Sat, 31 Jan 2015 11:55:29 +0800, fenghua at phytium.com.cn <fenghua@phytium.com.cn> wrote:
> From: David Feng <fenghua@phytium.com.cn>
> 
> Signed-off-by: David Feng <fenghua@phytium.com.cn>
> ---
>  board/armltd/vexpress64/vexpress64.c |   13 +++++++++++++
>  include/configs/vexpress_aemv8a.h    |   14 ++++++++++++--
>  2 files changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
> index 5897318..4171c6e 100644
> --- a/board/armltd/vexpress64/vexpress64.c
> +++ b/board/armltd/vexpress64/vexpress64.c
> @@ -12,9 +12,22 @@
>  #include <asm/io.h>
>  #include <linux/compiler.h>
>  #include <asm/semihosting.h>
> +#include <dm/platdata.h>
> +#include <dm/platform_data/serial_pl01x.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +static const struct pl01x_serial_platdata serial_platdata = {
> +	.base = V2M_UART0,
> +	.type = TYPE_PL011,
> +	.clock = 2400 * 1000,
> +};
> +
> +U_BOOT_DEVICE(vexpress_serials) = {
> +	.name = "serial_pl01x",
> +	.platdata = &serial_platdata,
> +};
> +
>  int board_init(void)
>  {
>  	return 0;
> diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
> index 027d78b..9b31c2d 100644
> --- a/include/configs/vexpress_aemv8a.h
> +++ b/include/configs/vexpress_aemv8a.h
> @@ -8,6 +8,8 @@
>  #ifndef __VEXPRESS_AEMV8A_H
>  #define __VEXPRESS_AEMV8A_H
>  
> +#define CONFIG_DM
> +
>  /* We use generic board for v8 Versatile Express */
>  #define CONFIG_SYS_GENERIC_BOARD
>  
> @@ -52,7 +54,6 @@
>  /* Flat Device Tree Definitions */
>  #define CONFIG_OF_LIBFDT
>  
> -
>  /* SMP Spin Table Definitions */
>  #ifdef CONFIG_BASE_FVP
>  #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
> @@ -132,6 +133,7 @@
>  #define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)
>  
>  /* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_F_LEN		0x2000
>  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))
>  
>  /* SMSC91C111 Ethernet Configuration */
> @@ -139,11 +141,19 @@
>  #define CONFIG_SMC91111_BASE		(0x01A000000)
>  
>  /* PL011 Serial Configuration */
> +#define CONFIG_BAUDRATE			115200
> +#ifdef CONFIG_DM
> +#define CONFIG_DM_SERIAL
> +#define CONFIG_PL01X_SERIAL
> +#else
> +#define CONFIG_SYS_SERIAL0		V2M_UART0
> +#define CONFIG_SYS_SERIAL1		V2M_UART1
> +#define CONFIG_CONS_INDEX		0
>  #define CONFIG_PL011_SERIAL
>  #define CONFIG_PL011_CLOCK		24000000
>  #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
>  					 (void *)CONFIG_SYS_SERIAL1}
> -#define CONFIG_CONS_INDEX		0
> +#endif
>  
>  #define CONFIG_BAUDRATE			115200
>  #define CONFIG_SYS_SERIAL0		V2M_UART0
> -- 
> 1.7.9.5
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Linus Walleij]

On Sat, Jan 31, 2015 at 4:55 AM,  <fenghua@phytium.com.cn> wrote:

> From: David Feng <fenghua@phytium.com.cn>
>
> Signed-off-by: David Feng <fenghua@phytium.com.cn>

This commit breaks U-Boot on the Juno board, I don't know how to
best fix it? Is DM something we want available on all boards or just
the FVP model?

Yours,
Linus Walleij

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Tom Rini]

On Mon, Apr 13, 2015 at 04:50:55PM +0200, Linus Walleij wrote:
> On Sat, Jan 31, 2015 at 4:55 AM,  <fenghua@phytium.com.cn> wrote:
> 
> > From: David Feng <fenghua@phytium.com.cn>
> >
> > Signed-off-by: David Feng <fenghua@phytium.com.cn>
> 
> This commit breaks U-Boot on the Juno board, I don't know how to
> best fix it? Is DM something we want available on all boards or just
> the FVP model?

All boards, moving forward more things are going to need it.  If you
poke around git log you'll see some other patches fixing "enabled DM and
now board X doesn't work" commits.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150413/1320c96b/attachment.sig>

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Linus Walleij]

On Mon, Apr 13, 2015 at 5:15 PM, Tom Rini <trini@konsulko.com> wrote:
> On Mon, Apr 13, 2015 at 04:50:55PM +0200, Linus Walleij wrote:
>> On Sat, Jan 31, 2015 at 4:55 AM,  <fenghua@phytium.com.cn> wrote:
>>
>> > From: David Feng <fenghua@phytium.com.cn>
>> >
>> > Signed-off-by: David Feng <fenghua@phytium.com.cn>
>>
>> This commit breaks U-Boot on the Juno board, I don't know how to
>> best fix it? Is DM something we want available on all boards or just
>> the FVP model?
>
> All boards, moving forward more things are going to need it.  If you
> poke around git log you'll see some other patches fixing "enabled DM and
> now board X doesn't work" commits.

Yeah well right now my problem is figuring out what DM is,
but I guess I will get it as part of fixing this...

Yours,
Linus Walleij

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Simon Glass]

Hi Linus,

On 13 April 2015 at 14:58, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Mon, Apr 13, 2015 at 5:15 PM, Tom Rini <trini@konsulko.com> wrote:
>> On Mon, Apr 13, 2015 at 04:50:55PM +0200, Linus Walleij wrote:
>>> On Sat, Jan 31, 2015 at 4:55 AM,  <fenghua@phytium.com.cn> wrote:
>>>
>>> > From: David Feng <fenghua@phytium.com.cn>
>>> >
>>> > Signed-off-by: David Feng <fenghua@phytium.com.cn>
>>>
>>> This commit breaks U-Boot on the Juno board, I don't know how to
>>> best fix it? Is DM something we want available on all boards or just
>>> the FVP model?
>>
>> All boards, moving forward more things are going to need it.  If you
>> poke around git log you'll see some other patches fixing "enabled DM and
>> now board X doesn't work" commits.
>
> Yeah well right now my problem is figuring out what DM is,
> but I guess I will get it as part of fixing this...

It's a driver model for U-Boot. You could start with
doc/driver-model/README.txt and try the 'demo' command in sandbox. The
demo drivers are pretty easy to follow.

Regards,
Simon

[U-Boot] [PATCH 2/2] ARMv8: enable DM in vexpress64 board

[Linus Walleij]

On Tue, Apr 14, 2015 at 12:26 AM, Simon Glass <sjg@chromium.org> wrote:
> On 13 April 2015 at 14:58, Linus Walleij <linus.walleij@linaro.org> wrote:

>> Yeah well right now my problem is figuring out what DM is,
>> but I guess I will get it as part of fixing this...
>
> It's a driver model for U-Boot. You could start with
> doc/driver-model/README.txt and try the 'demo' command in sandbox. The
> demo drivers are pretty easy to follow.

Thanks Simon, much appreciated. Reading up and becoming a better
developer.

Yours,
Linus Walleij