* [PATCH v3 0/6] Add new MFD driver for MAX77843
@ 2015-02-04 4:56 ` Jaewon Kim
0 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch series adds MAX77843(Multi Function Device) driver.
The MAX77843 includes MUIC(Micro USB Interface Controller), Li+ Charger
with Fuel Gauge and 2 safeout LDOs for USB device.
It is interfaced to host controller using I2C.
Changes in v3:
MFD Core
- fix wrong description and indentation in header.
- remove unnecessary variable.
Regulator
- use ARRAY_SIZE() instead of define.
Changes in V2:
MFD Core
- Fix charger regmap handle and typo.
MUIC
- cleanup enum list.
- set path before send excon event.
- fix variable names and typos for readability.
Charger
- Remove unnecessary header.
- Chnage error message more readable.
- Remove unnecessary lines.
Fuelgauge
- Fix regmap_config and use regmap_read.
- Add i2c_unregister_device function on *_remove function.
- Fix typo in Kconfig.
Doc
- Remove unnecessary lines.
- Add example of charger regulator.
Beomho Seo (2):
power: max77843_charger: Add Max77843 charger device driver
power: max77843_battery: Add Max77843 fuel gauge device driver
Jaewon Kim (4):
mfd: max77843: Add max77843 MFD driver core driver
extcon: max77843: Add max77843 MUIC driver
regulator: max77843: Add max77843 regulator driver
Documentation: Add device tree bindings document for max77843
Documentation/devicetree/bindings/mfd/max77843.txt | 90 ++
drivers/extcon/Kconfig | 10 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-max77843.c | 881 ++++++++++++++++++++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max77843.c | 245 ++++++
drivers/power/Kconfig | 16 +
drivers/power/Makefile | 2 +
drivers/power/max77843_battery.c | 286 +++++++
drivers/power/max77843_charger.c | 508 +++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77843.c | 227 +++++
include/linux/mfd/max77843-private.h | 441 ++++++++++
15 files changed, 2731 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max77843.txt
create mode 100644 drivers/extcon/extcon-max77843.c
create mode 100644 drivers/mfd/max77843.c
create mode 100644 drivers/power/max77843_battery.c
create mode 100644 drivers/power/max77843_charger.c
create mode 100644 drivers/regulator/max77843.c
create mode 100644 include/linux/mfd/max77843-private.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-04 4:56 ` Jaewon Kim
(?)
@ 2015-02-04 4:56 ` Jaewon Kim
2015-02-04 12:01 ` Chanwoo Choi
2015-02-16 13:51 ` Lee Jones
-1 siblings, 2 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch adds MAX77843 core/irq driver to support PMIC,
MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
LED and Haptic device.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/max77843.c | 245 +++++++++++++++++++
include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
4 files changed, 701 insertions(+)
create mode 100644 drivers/mfd/max77843.c
create mode 100644 include/linux/mfd/max77843-private.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b731..0c67c79 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -442,6 +442,20 @@ config MFD_MAX77693
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX77843
+ bool "Maxim Semiconductor MAX77843 PMIC Support"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to add support for Maxim Semiconductor MAX77843.
+ This is companion Power Management IC with LEDs, Haptic, Charger,
+ Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..fe4f75c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
+obj-$(CONFIG_MFD_MAX77843) += max77843.o
obj-$(CONFIG_MFD_MAX8907) += max8907.o
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
new file mode 100644
index 0000000..191a557
--- /dev/null
+++ b/drivers/mfd/max77843.c
@@ -0,0 +1,245 @@
+/*
+ * max77843.c - MFD core driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell max77843_devs[] = {
+ {
+ .name = "max77843-muic",
+ .of_compatible = "maxim,max77843-muic",
+ }, {
+ .name = "max77843-regulator",
+ .of_compatible = "maxim,max77843-regulator",
+ }, {
+ .name = "max77843-charger",
+ .of_compatible = "maxim,max77843-charger"
+ }, {
+ .name = "max77843-fuelgauge",
+ .of_compatible = "maxim,max77843-fuelgauge",
+ },
+};
+
+static const struct regmap_config max77843_charger_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_CHG_REG_END,
+};
+
+static const struct regmap_config max77843_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_SYS_REG_END,
+};
+
+static const struct regmap_irq max77843_irqs[] = {
+ /* TOPSYS interrupts */
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
+ { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
+};
+
+static const struct regmap_irq_chip max77843_irq_chip = {
+ .name = "max77843",
+ .status_base = MAX77843_SYS_REG_SYSINTSRC,
+ .mask_base = MAX77843_SYS_REG_SYSINTMASK,
+ .mask_invert = false,
+ .num_regs = 1,
+ .irqs = max77843_irqs,
+ .num_irqs = ARRAY_SIZE(max77843_irqs),
+};
+
+/* Charger and Charger regulator use same regmap. */
+static int max77843_chg_init(struct max77843 *max77843)
+{
+ int ret;
+
+ max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
+ if (!max77843->i2c_chg) {
+ dev_err(&max77843->i2c->dev,
+ "Cannot allocate I2C device for Charger\n");
+ return PTR_ERR(max77843->i2c_chg);
+ }
+ i2c_set_clientdata(max77843->i2c_chg, max77843);
+
+ max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
+ &max77843_charger_regmap_config);
+ if (IS_ERR(max77843->regmap_chg)) {
+ ret = PTR_ERR(max77843->regmap_chg);
+ goto err_chg_i2c;
+ }
+
+ return 0;
+
+err_chg_i2c:
+ i2c_unregister_device(max77843->i2c_chg);
+
+ return ret;
+}
+
+static int max77843_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct max77843 *max77843;
+ unsigned int reg_data;
+ int ret;
+
+ max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
+ if (!max77843)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, max77843);
+ max77843->dev = &i2c->dev;
+ max77843->i2c = i2c;
+ max77843->irq = i2c->irq;
+
+ max77843->regmap = devm_regmap_init_i2c(i2c,
+ &max77843_regmap_config);
+ if (IS_ERR(max77843->regmap)) {
+ dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
+ return PTR_ERR(max77843->regmap);
+ }
+
+ ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+ 0, &max77843_irq_chip, &max77843->irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
+ return ret;
+ }
+
+ ret = regmap_read(max77843->regmap,
+ MAX77843_SYS_REG_PMICID, ®_data);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read PMIC ID\n");
+ goto err_pmic_id;
+ }
+ dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
+
+ ret = max77843_chg_init(max77843);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to init Charger\n");
+ goto err_pmic_id;
+ }
+
+ ret = regmap_update_bits(max77843->regmap,
+ MAX77843_SYS_REG_INTSRCMASK,
+ MAX77843_INTSRC_MASK_MASK,
+ (unsigned int)~MAX77843_INTSRC_MASK_MASK);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
+ goto err_pmic_id;
+ }
+
+ ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
+ ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to add mfd device\n");
+ goto err_pmic_id;
+ }
+
+ device_init_wakeup(max77843->dev, 1);
+
+ return 0;
+
+err_pmic_id:
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+ return ret;
+}
+
+static int max77843_remove(struct i2c_client *i2c)
+{
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(max77843->dev);
+
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+ i2c_unregister_device(max77843->i2c_chg);
+ i2c_unregister_device(max77843->i2c);
+
+ return 0;
+}
+
+static const struct of_device_id max77843_dt_match[] = {
+ { .compatible = "maxim,max77843", },
+ { /* sentinel */ },
+};
+
+static const struct i2c_device_id max77843_id[] = {
+ { "max77843", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, max77843_id);
+
+static int __maybe_unused max77843_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(max77843->irq);
+ disable_irq(max77843->irq);
+
+ return 0;
+}
+
+static int __maybe_unused max77843_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(max77843->irq);
+ enable_irq(max77843->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
+
+static struct i2c_driver max77843_i2c_driver = {
+ .driver = {
+ .name = "max77843",
+ .pm = &max77843_pm,
+ .of_match_table = max77843_dt_match,
+ },
+ .probe = max77843_probe,
+ .remove = max77843_remove,
+ .id_table = max77843_id,
+};
+static int __init max77843_i2c_init(void)
+{
+ return i2c_add_driver(&max77843_i2c_driver);
+}
+subsys_initcall(max77843_i2c_init);
+
+static void __exit max77843_i2c_exit(void)
+{
+ i2c_del_driver(&max77843_i2c_driver);
+}
+module_exit(max77843_i2c_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77843 multi-function core driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
new file mode 100644
index 0000000..23f8ca9
--- /dev/null
+++ b/include/linux/mfd/max77843-private.h
@@ -0,0 +1,441 @@
+/*
+ * max77843-private.h - Common variables for the Maxim MAX77843 driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MAX77843_PRIVATE_H_
+#define __MAX77843_PRIVATE_H_
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define I2C_ADDR_TOPSYS (0xCC >> 1)
+#define I2C_ADDR_CHG (0xD2 >> 1)
+#define I2C_ADDR_FG (0x6C >> 1)
+#define I2C_ADDR_MUIC (0x4A >> 1)
+
+/* Topsys, Haptic and LED registers */
+enum max77843_sys_reg {
+ MAX77843_SYS_REG_PMICID = 0x00,
+ MAX77843_SYS_REG_PMICREV = 0x01,
+ MAX77843_SYS_REG_MAINCTRL1 = 0x02,
+ MAX77843_SYS_REG_INTSRC = 0x22,
+ MAX77843_SYS_REG_INTSRCMASK = 0x23,
+ MAX77843_SYS_REG_SYSINTSRC = 0x24,
+ MAX77843_SYS_REG_SYSINTMASK = 0x26,
+ MAX77843_SYS_REG_TOPSYS_STAT = 0x28,
+ MAX77843_SYS_REG_SAFEOUTCTRL = 0xC6,
+
+ MAX77843_SYS_REG_END,
+};
+
+enum max77843_haptic_reg {
+ MAX77843_HAP_REG_MCONFIG = 0x10,
+
+ MAX77843_HAP_REG_END,
+};
+
+enum max77843_led_reg {
+ MAX77843_LED_REG_LEDEN = 0x30,
+ MAX77843_LED_REG_LED0BRT = 0x31,
+ MAX77843_LED_REG_LED1BRT = 0x32,
+ MAX77843_LED_REG_LED2BRT = 0x33,
+ MAX77843_LED_REG_LED3BRT = 0x34,
+ MAX77843_LED_REG_LEDBLNK = 0x38,
+ MAX77843_LED_REG_LEDRAMP = 0x36,
+
+ MAX77843_LED_REG_END,
+};
+
+/* Charger registers */
+enum max77843_charger_reg {
+ MAX77843_CHG_REG_CHG_INT = 0xB0,
+ MAX77843_CHG_REG_CHG_INT_MASK = 0xB1,
+ MAX77843_CHG_REG_CHG_INT_OK = 0xB2,
+ MAX77843_CHG_REG_CHG_DTLS_00 = 0xB3,
+ MAX77843_CHG_REG_CHG_DTLS_01 = 0xB4,
+ MAX77843_CHG_REG_CHG_DTLS_02 = 0xB5,
+ MAX77843_CHG_REG_CHG_CNFG_00 = 0xB7,
+ MAX77843_CHG_REG_CHG_CNFG_01 = 0xB8,
+ MAX77843_CHG_REG_CHG_CNFG_02 = 0xB9,
+ MAX77843_CHG_REG_CHG_CNFG_03 = 0xBA,
+ MAX77843_CHG_REG_CHG_CNFG_04 = 0xBB,
+ MAX77843_CHG_REG_CHG_CNFG_06 = 0xBD,
+ MAX77843_CHG_REG_CHG_CNFG_07 = 0xBE,
+ MAX77843_CHG_REG_CHG_CNFG_09 = 0xC0,
+ MAX77843_CHG_REG_CHG_CNFG_10 = 0xC1,
+ MAX77843_CHG_REG_CHG_CNFG_11 = 0xC2,
+ MAX77843_CHG_REG_CHG_CNFG_12 = 0xC3,
+
+ MAX77843_CHG_REG_END,
+};
+
+/* Fuel gauge registers */
+enum max77843_fuelgauge {
+ MAX77843_FG_REG_STATUS = 0x00,
+ MAX77843_FG_REG_VALRT_TH = 0x01,
+ MAX77843_FG_REG_TALRT_TH = 0x02,
+ MAX77843_FG_REG_SALRT_TH = 0x03,
+ MAX77843_FG_RATE_AT_RATE = 0x04,
+ MAX77843_FG_REG_REMCAP_REP = 0x05,
+ MAX77843_FG_REG_SOCREP = 0x06,
+ MAX77843_FG_REG_AGE = 0x07,
+ MAX77843_FG_REG_TEMP = 0x08,
+ MAX77843_FG_REG_VCELL = 0x09,
+ MAX77843_FG_REG_CURRENT = 0x0A,
+ MAX77843_FG_REG_AVG_CURRENT = 0x0B,
+ MAX77843_FG_REG_SOCMIX = 0x0D,
+ MAX77843_FG_REG_SOCAV = 0x0E,
+ MAX77843_FG_REG_REMCAP_MIX = 0x0F,
+ MAX77843_FG_REG_FULLCAP = 0x10,
+ MAX77843_FG_REG_AVG_TEMP = 0x16,
+ MAX77843_FG_REG_CYCLES = 0x17,
+ MAX77843_FG_REG_AVG_VCELL = 0x19,
+ MAX77843_FG_REG_CONFIG = 0x1D,
+ MAX77843_FG_REG_REMCAP_AV = 0x1F,
+ MAX77843_FG_REG_FULLCAP_NOM = 0x23,
+ MAX77843_FG_REG_MISCCFG = 0x2B,
+ MAX77843_FG_REG_RCOMP = 0x38,
+ MAX77843_FG_REG_FSTAT = 0x3D,
+ MAX77843_FG_REG_DQACC = 0x45,
+ MAX77843_FG_REG_DPACC = 0x46,
+ MAX77843_FG_REG_OCV = 0xEE,
+ MAX77843_FG_REG_VFOCV = 0xFB,
+ MAX77843_FG_SOCVF = 0xFF,
+
+ MAX77843_FG_END,
+};
+
+/* MUIC registers */
+enum max77843_muic_reg {
+ MAX77843_MUIC_REG_ID = 0x00,
+ MAX77843_MUIC_REG_INT1 = 0x01,
+ MAX77843_MUIC_REG_INT2 = 0x02,
+ MAX77843_MUIC_REG_INT3 = 0x03,
+ MAX77843_MUIC_REG_STATUS1 = 0x04,
+ MAX77843_MUIC_REG_STATUS2 = 0x05,
+ MAX77843_MUIC_REG_STATUS3 = 0x06,
+ MAX77843_MUIC_REG_INTMASK1 = 0x07,
+ MAX77843_MUIC_REG_INTMASK2 = 0x08,
+ MAX77843_MUIC_REG_INTMASK3 = 0x09,
+ MAX77843_MUIC_REG_CDETCTRL1 = 0x0A,
+ MAX77843_MUIC_REG_CDETCTRL2 = 0x0B,
+ MAX77843_MUIC_REG_CONTROL1 = 0x0C,
+ MAX77843_MUIC_REG_CONTROL2 = 0x0D,
+ MAX77843_MUIC_REG_CONTROL3 = 0x0E,
+ MAX77843_MUIC_REG_CONTROL4 = 0x16,
+ MAX77843_MUIC_REG_HVCONTROL1 = 0x17,
+ MAX77843_MUIC_REG_HVCONTROL2 = 0x18,
+
+ MAX77843_MUIC_REG_END,
+};
+
+enum max77843_irq {
+ /* Topsys: SYSTEM */
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSUVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSOVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TSHDN_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TM_INT,
+
+ /* Charger: CHG_INT */
+ MAX77843_CHG_IRQ_CHG_INT_BYP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BATP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BAT_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHG_I,
+ MAX77843_CHG_IRQ_CHG_INT_WCIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHGIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_AICL_I,
+
+ MAX77843_IRQ_NUM,
+};
+
+enum max77843_irq_muic {
+ /* MUIC: INT1 */
+ MAX77843_MUIC_IRQ_INT1_ADC,
+ MAX77843_MUIC_IRQ_INT1_ADCERROR,
+ MAX77843_MUIC_IRQ_INT1_ADC1K,
+
+ /* MUIC: INT2 */
+ MAX77843_MUIC_IRQ_INT2_CHGTYP,
+ MAX77843_MUIC_IRQ_INT2_CHGDETRUN,
+ MAX77843_MUIC_IRQ_INT2_DCDTMR,
+ MAX77843_MUIC_IRQ_INT2_DXOVP,
+ MAX77843_MUIC_IRQ_INT2_VBVOLT,
+
+ /* MUIC: INT3 */
+ MAX77843_MUIC_IRQ_INT3_VBADC,
+ MAX77843_MUIC_IRQ_INT3_VDNMON,
+ MAX77843_MUIC_IRQ_INT3_DNRES,
+ MAX77843_MUIC_IRQ_INT3_MPNACK,
+ MAX77843_MUIC_IRQ_INT3_MRXBUFOW,
+ MAX77843_MUIC_IRQ_INT3_MRXTRF,
+ MAX77843_MUIC_IRQ_INT3_MRXPERR,
+ MAX77843_MUIC_IRQ_INT3_MRXRDY,
+
+ MAX77843_MUIC_IRQ_NUM,
+};
+
+/* MAX77843 interrupts */
+#define MAX77843_SYS_IRQ_SYSUVLO_INT BIT(0)
+#define MAX77843_SYS_IRQ_SYSOVLO_INT BIT(1)
+#define MAX77843_SYS_IRQ_TSHDN_INT BIT(2)
+#define MAX77843_SYS_IRQ_TM_INT BIT(3)
+
+/* Max77843 charger insterrupts */
+#define MAX77843_CHG_BYP_I BIT(0)
+#define MAX77843_CHG_BATP_I BIT(2)
+#define MAX77843_CHG_BAT_I BIT(3)
+#define MAX77843_CHG_CHG_I BIT(4)
+#define MAX77843_CHG_WCIN_I BIT(5)
+#define MAX77843_CHG_CHGIN_I BIT(6)
+#define MAX77843_CHG_AICL_I BIT(7)
+
+/* MAX77843 CHG_INT_OK register */
+#define MAX77843_CHG_BYP_OK BIT(0)
+#define MAX77843_CHG_BATP_OK BIT(2)
+#define MAX77843_CHG_BAT_OK BIT(3)
+#define MAX77843_CHG_CHG_OK BIT(4)
+#define MAX77843_CHG_WCIN_OK BIT(5)
+#define MAX77843_CHG_CHGIN_OK BIT(6)
+#define MAX77843_CHG_AICL_OK BIT(7)
+
+/* MAX77843 CHG_DETAILS_00 register */
+#define MAX77843_CHG_BAT_DTLS BIT(0)
+
+/* MAX77843 CHG_DETAILS_01 register */
+#define MAX77843_CHG_DTLS_MASK 0x0f
+#define MAX77843_CHG_PQ_MODE 0x00
+#define MAX77843_CHG_CC_MODE 0x01
+#define MAX77843_CHG_CV_MODE 0x02
+#define MAX77843_CHG_TO_MODE 0x03
+#define MAX77843_CHG_DO_MODE 0x04
+#define MAX77843_CHG_HT_MODE 0x05
+#define MAX77843_CHG_TF_MODE 0x06
+#define MAX77843_CHG_TS_MODE 0x07
+#define MAX77843_CHG_OFF_MODE 0x08
+
+#define MAX77843_CHG_BAT_DTLS_MASK 0xf0
+#define MAX77843_CHG_NO_BAT (0x00 << 4)
+#define MAX77843_CHG_LOW_VOLT_BAT (0x01 << 4)
+#define MAX77843_CHG_LONG_BAT_TIME (0x02 << 4)
+#define MAX77843_CHG_OK_BAT (0x03 << 4)
+#define MAX77843_CHG_OK_LOW_VOLT_BAT (0x04 << 4)
+#define MAX77843_CHG_OVER_VOLT_BAT (0x05 << 4)
+#define MAX77843_CHG_OVER_CURRENT_BAT (0x06 << 4)
+
+/* MAX77843 CHG_CNFG_00 register */
+#define MAX77843_CHG_DISABLE 0x00
+#define MAX77843_CHG_ENABLE 0x05
+#define MAX77843_CHG_MASK 0x01
+#define MAX77843_CHG_BUCK_MASK 0x04
+
+/* MAX77843 CHG_CNFG_01 register */
+#define MAX77843_CHG_RESTART_THRESHOLD_100 0x00
+#define MAX77843_CHG_RESTART_THRESHOLD_150 0x10
+#define MAX77843_CHG_RESTART_THRESHOLD_200 0x20
+#define MAX77843_CHG_RESTART_THRESHOLD_DISABLE 0x30
+
+/* MAX77843 CHG_CNFG_02 register */
+#define MAX77843_CHG_FAST_CHG_CURRENT_MIN 100000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MAX 3150000
+#define MAX77843_CHG_FAST_CHG_CURRENT_STEP 50000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MASK 0x3f
+#define MAX77843_CHG_OTG_ILIMIT_500 (0x00 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_900 (0x01 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1200 (0x02 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1500 (0x03 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_MASK 0xc0
+
+/* MAX77843 CHG_CNFG_03 register */
+#define MAX77843_CHG_TOP_OFF_CURRENT_MIN 125000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MAX 650000
+#define MAX77843_CHG_TOP_OFF_CURRENT_STEP 75000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MASK 0x07
+
+/* MAX77843 CHG_CNFG_06 register */
+#define MAX77843_CHG_WRITE_CAP_BLOCK 0x10
+#define MAX77843_CHG_WRITE_CAP_UNBLOCK 0x0C
+
+/* MAX77843_CHG_CNFG_09_register */
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN 100000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX 4000000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_REF 3367000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP 33000
+
+#define MAX77843_MUIC_ADC BIT(0)
+#define MAX77843_MUIC_ADCERROR BIT(2)
+#define MAX77843_MUIC_ADC1K BIT(3)
+
+#define MAX77843_MUIC_CHGTYP BIT(0)
+#define MAX77843_MUIC_CHGDETRUN BIT(1)
+#define MAX77843_MUIC_DCDTMR BIT(2)
+#define MAX77843_MUIC_DXOVP BIT(3)
+#define MAX77843_MUIC_VBVOLT BIT(4)
+
+#define MAX77843_MUIC_VBADC BIT(0)
+#define MAX77843_MUIC_VDNMON BIT(1)
+#define MAX77843_MUIC_DNRES BIT(2)
+#define MAX77843_MUIC_MPNACK BIT(3)
+#define MAX77843_MUIC_MRXBUFOW BIT(4)
+#define MAX77843_MUIC_MRXTRF BIT(5)
+#define MAX77843_MUIC_MRXPERR BIT(6)
+#define MAX77843_MUIC_MRXRDY BIT(7)
+
+/* MAX77843 INTSRCMASK register */
+#define MAX77843_INTSRCMASK_CHGR 0
+#define MAX77843_INTSRCMASK_SYS 1
+#define MAX77843_INTSRCMASK_FG 2
+#define MAX77843_INTSRCMASK_MUIC 3
+
+#define MAX77843_INTSRCMASK_CHGR_MASK BIT(MAX77843_INTSRCMASK_CHGR)
+#define MAX77843_INTSRCMASK_SYS_MASK BIT(MAX77843_INTSRCMASK_SYS)
+#define MAX77843_INTSRCMASK_FG_MASK BIT(MAX77843_INTSRCMASK_FG)
+#define MAX77843_INTSRCMASK_MUIC_MASK BIT(MAX77843_INTSRCMASK_MUIC)
+
+#define MAX77843_INTSRC_MASK_MASK \
+ (MAX77843_INTSRCMASK_MUIC_MASK | MAX77843_INTSRCMASK_FG_MASK | \
+ MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
+
+/* MAX77843 STATUS register*/
+#define STATUS1_ADC_SHIFT 0
+#define STATUS1_ADCERROR_SHIFT 6
+#define STATUS1_ADC1K_SHIFT 7
+#define STATUS2_CHGTYP_SHIFT 0
+#define STATUS2_CHGDETRUN_SHIFT 3
+#define STATUS2_DCDTMR_SHIFT 4
+#define STATUS2_DXOVP_SHIFT 5
+#define STATUS2_VBVOLT_SHIFT 6
+#define STATUS3_VBADC_SHIFT 0
+#define STATUS3_VDNMON_SHIFT 4
+#define STATUS3_DNRES_SHIFT 5
+#define STATUS3_MPNACK_SHIFT 6
+
+#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
+#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
+#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
+#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
+#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
+#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
+#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
+#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
+
+/* MAX77843 CONTROL register */
+#define CONTROL1_COMP1SW_SHIFT 0
+#define CONTROL1_COMP2SW_SHIFT 3
+#define CONTROL1_IDBEN_SHIFT 7
+#define CONTROL2_LOWPWR_SHIFT 0
+#define CONTROL2_ADCEN_SHIFT 1
+#define CONTROL2_CPEN_SHIFT 2
+#define CONTROL2_ACC_DET_SHIFT 5
+#define CONTROL2_USBCPINT_SHIFT 6
+#define CONTROL2_RCPS_SHIFT 7
+#define CONTROL3_JIGSET_SHIFT 0
+#define CONTROL4_ADCDBSET_SHIFT 0
+#define CONTROL4_USBAUTO_SHIFT 4
+#define CONTROL4_FCTAUTO_SHIFT 5
+#define CONTROL4_ADCMODE_SHIFT 6
+
+#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
+#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
+#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
+#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
+
+/* MAX77843 switch port */
+#define COM_OPEN 0
+#define COM_USB 1
+#define COM_AUDIO 2
+#define COM_UART 3
+#define COM_AUX_USB 4
+#define COM_AUX_UART 5
+
+#define CONTROL1_COM_SW \
+ (MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
+ MAX77843_MUIC_CONTROL1_COMP2SW_MASK)
+
+#define CONTROL1_SW_OPEN \
+ (COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
+ COM_OPEN << CONTROL1_COMP2SW_SHIFT)
+#define CONTROL1_SW_USB \
+ (COM_USB << CONTROL1_COMP1SW_SHIFT | \
+ COM_USB << CONTROL1_COMP2SW_SHIFT)
+#define CONTROL1_SW_AUDIO \
+ (COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUDIO << CONTROL1_COMP2SW_SHIFT)
+#define CONTROL1_SW_UART \
+ (COM_UART << CONTROL1_COMP1SW_SHIFT | \
+ COM_UART << CONTROL1_COMP2SW_SHIFT)
+#define CONTROL1_SW_AUX_USB \
+ (COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_USB << CONTROL1_COMP2SW_SHIFT)
+#define CONTROL1_SW_AUX_UART \
+ (COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_UART << CONTROL1_COMP2SW_SHIFT)
+
+#define MAX77843_DISABLE 0
+#define MAX77843_ENABLE 1
+
+#define CONTROL4_AUTO_DISABLE \
+ (MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT)
+#define CONTROL4_AUTO_ENABLE \
+ (MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT)
+
+/* MAX77843 SAFEOUT LDO Control register */
+#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
+#define SAFEOUTCTRL_SAFEOUT2_SHIFT 2
+#define SAFEOUTCTRL_ENSAFEOUT1_SHIFT 6
+#define SAFEOUTCTRL_ENSAFEOUT2_SHIFT 7
+
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT2_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
+
+struct max77843 {
+ struct device *dev;
+
+ struct i2c_client *i2c;
+ struct i2c_client *i2c_chg;
+ struct i2c_client *i2c_fuel;
+ struct i2c_client *i2c_muic;
+
+ struct regmap *regmap;
+ struct regmap *regmap_chg;
+ struct regmap *regmap_fuel;
+ struct regmap *regmap_muic;
+
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap_irq_chip_data *irq_data_chg;
+ struct regmap_irq_chip_data *irq_data_fuel;
+ struct regmap_irq_chip_data *irq_data_muic;
+
+ int irq;
+};
+#endif /* __MAX77843_H__ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-04 4:56 ` [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver Jaewon Kim
@ 2015-02-04 12:01 ` Chanwoo Choi
2015-02-16 13:42 ` Lee Jones
2015-02-16 13:51 ` Lee Jones
1 sibling, 1 reply; 20+ messages in thread
From: Chanwoo Choi @ 2015-02-04 12:01 UTC (permalink / raw)
To: Jaewon Kim
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Lee Jones, Sebastian Reichel, Mark Brown, Beomho Seo
Hi Jaewon,
On 02/04/2015 01:56 PM, Jaewon Kim wrote:
> This patch adds MAX77843 core/irq driver to support PMIC,
> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> LED and Haptic device.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> ---
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77843.c | 245 +++++++++++++++++++
> include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
> 4 files changed, 701 insertions(+)
> create mode 100644 drivers/mfd/max77843.c
> create mode 100644 include/linux/mfd/max77843-private.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2e6b731..0c67c79 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -442,6 +442,20 @@ config MFD_MAX77693
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77843
> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> + depends on I2C=y
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77843.
> + This is companion Power Management IC with LEDs, Haptic, Charger,
> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> + This driver provides common support for accessing the device;
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MAX8907
> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 53467e2..fe4f75c 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> max8925-objs := max8925-core.o max8925-i2c.o
> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> new file mode 100644
> index 0000000..191a557
> --- /dev/null
> +++ b/drivers/mfd/max77843.c
> @@ -0,0 +1,245 @@
> +/*
> + * max77843.c - MFD core driver for the Maxim MAX77843
> + *
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>
> + * Author: Beomho Seo <beomho.seo@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max77843-private.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +
> +static const struct mfd_cell max77843_devs[] = {
> + {
> + .name = "max77843-muic",
> + .of_compatible = "maxim,max77843-muic",
> + }, {
> + .name = "max77843-regulator",
> + .of_compatible = "maxim,max77843-regulator",
> + }, {
> + .name = "max77843-charger",
> + .of_compatible = "maxim,max77843-charger"
> + }, {
> + .name = "max77843-fuelgauge",
> + .of_compatible = "maxim,max77843-fuelgauge",
> + },
> +};
> +
> +static const struct regmap_config max77843_charger_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77843_CHG_REG_END,
> +};
> +
> +static const struct regmap_config max77843_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77843_SYS_REG_END,
> +};
> +
> +static const struct regmap_irq max77843_irqs[] = {
> + /* TOPSYS interrupts */
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
> +};
> +
> +static const struct regmap_irq_chip max77843_irq_chip = {
> + .name = "max77843",
> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
> + .mask_invert = false,
> + .num_regs = 1,
> + .irqs = max77843_irqs,
> + .num_irqs = ARRAY_SIZE(max77843_irqs),
> +};
> +
> +/* Charger and Charger regulator use same regmap. */
> +static int max77843_chg_init(struct max77843 *max77843)
> +{
> + int ret;
> +
> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
> + if (!max77843->i2c_chg) {
> + dev_err(&max77843->i2c->dev,
> + "Cannot allocate I2C device for Charger\n");
> + return PTR_ERR(max77843->i2c_chg);
> + }
> + i2c_set_clientdata(max77843->i2c_chg, max77843);
> +
> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
> + &max77843_charger_regmap_config);
> + if (IS_ERR(max77843->regmap_chg)) {
> + ret = PTR_ERR(max77843->regmap_chg);
> + goto err_chg_i2c;
> + }
> +
> + return 0;
> +
> +err_chg_i2c:
> + i2c_unregister_device(max77843->i2c_chg);
> +
> + return ret;
> +}
> +
> +static int max77843_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct max77843 *max77843;
> + unsigned int reg_data;
> + int ret;
> +
> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
> + if (!max77843)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, max77843);
> + max77843->dev = &i2c->dev;
> + max77843->i2c = i2c;
> + max77843->irq = i2c->irq;
> +
> + max77843->regmap = devm_regmap_init_i2c(i2c,
> + &max77843_regmap_config);
> + if (IS_ERR(max77843->regmap)) {
> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
> + return PTR_ERR(max77843->regmap);
> + }
> +
> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> + 0, &max77843_irq_chip, &max77843->irq_data);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> + return ret;
> + }
> +
> + ret = regmap_read(max77843->regmap,
> + MAX77843_SYS_REG_PMICID, ®_data);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
> + goto err_pmic_id;
> + }
> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
> +
> + ret = max77843_chg_init(max77843);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to init Charger\n");
> + goto err_pmic_id;
> + }
> +
> + ret = regmap_update_bits(max77843->regmap,
> + MAX77843_SYS_REG_INTSRCMASK,
> + MAX77843_INTSRC_MASK_MASK,
> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
> + goto err_pmic_id;
> + }
> +
> + ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
> + ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to add mfd device\n");
> + goto err_pmic_id;
> + }
> +
> + device_init_wakeup(max77843->dev, 1);
> +
> + return 0;
> +
> +err_pmic_id:
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + return ret;
> +}
> +
> +static int max77843_remove(struct i2c_client *i2c)
> +{
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(max77843->dev);
> +
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + i2c_unregister_device(max77843->i2c_chg);
> + i2c_unregister_device(max77843->i2c);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id max77843_dt_match[] = {
> + { .compatible = "maxim,max77843", },
> + { /* sentinel */ },
> +};
> +
> +static const struct i2c_device_id max77843_id[] = {
> + { "max77843", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i2c, max77843_id);
> +
> +static int __maybe_unused max77843_suspend(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(max77843->irq);
> + disable_irq(max77843->irq);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused max77843_resume(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(max77843->irq);
> + enable_irq(max77843->irq);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
> +
> +static struct i2c_driver max77843_i2c_driver = {
> + .driver = {
> + .name = "max77843",
> + .pm = &max77843_pm,
> + .of_match_table = max77843_dt_match,
> + },
> + .probe = max77843_probe,
> + .remove = max77843_remove,
> + .id_table = max77843_id,
> +};
> +static int __init max77843_i2c_init(void)
> +{
> + return i2c_add_driver(&max77843_i2c_driver);
> +}
> +subsys_initcall(max77843_i2c_init);
> +
> +static void __exit max77843_i2c_exit(void)
> +{
> + i2c_del_driver(&max77843_i2c_driver);
> +}
> +module_exit(max77843_i2c_exit);
> +
> +MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
> +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
> +MODULE_DESCRIPTION("Maxim MAX77843 multi-function core driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
> new file mode 100644
> index 0000000..23f8ca9
> --- /dev/null
> +++ b/include/linux/mfd/max77843-private.h
> @@ -0,0 +1,441 @@
> +/*
> + * max77843-private.h - Common variables for the Maxim MAX77843 driver
> + *
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>
> + * Author: Beomho Seo <beomho.seo@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __MAX77843_PRIVATE_H_
> +#define __MAX77843_PRIVATE_H_
> +
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +#define I2C_ADDR_TOPSYS (0xCC >> 1)
> +#define I2C_ADDR_CHG (0xD2 >> 1)
> +#define I2C_ADDR_FG (0x6C >> 1)
> +#define I2C_ADDR_MUIC (0x4A >> 1)
> +
> +/* Topsys, Haptic and LED registers */
> +enum max77843_sys_reg {
> + MAX77843_SYS_REG_PMICID = 0x00,
> + MAX77843_SYS_REG_PMICREV = 0x01,
> + MAX77843_SYS_REG_MAINCTRL1 = 0x02,
> + MAX77843_SYS_REG_INTSRC = 0x22,
> + MAX77843_SYS_REG_INTSRCMASK = 0x23,
> + MAX77843_SYS_REG_SYSINTSRC = 0x24,
> + MAX77843_SYS_REG_SYSINTMASK = 0x26,
> + MAX77843_SYS_REG_TOPSYS_STAT = 0x28,
> + MAX77843_SYS_REG_SAFEOUTCTRL = 0xC6,
> +
> + MAX77843_SYS_REG_END,
> +};
> +
> +enum max77843_haptic_reg {
> + MAX77843_HAP_REG_MCONFIG = 0x10,
> +
> + MAX77843_HAP_REG_END,
> +};
> +
> +enum max77843_led_reg {
> + MAX77843_LED_REG_LEDEN = 0x30,
> + MAX77843_LED_REG_LED0BRT = 0x31,
> + MAX77843_LED_REG_LED1BRT = 0x32,
> + MAX77843_LED_REG_LED2BRT = 0x33,
> + MAX77843_LED_REG_LED3BRT = 0x34,
> + MAX77843_LED_REG_LEDBLNK = 0x38,
> + MAX77843_LED_REG_LEDRAMP = 0x36,
> +
> + MAX77843_LED_REG_END,
> +};
> +
> +/* Charger registers */
> +enum max77843_charger_reg {
> + MAX77843_CHG_REG_CHG_INT = 0xB0,
> + MAX77843_CHG_REG_CHG_INT_MASK = 0xB1,
> + MAX77843_CHG_REG_CHG_INT_OK = 0xB2,
> + MAX77843_CHG_REG_CHG_DTLS_00 = 0xB3,
> + MAX77843_CHG_REG_CHG_DTLS_01 = 0xB4,
> + MAX77843_CHG_REG_CHG_DTLS_02 = 0xB5,
> + MAX77843_CHG_REG_CHG_CNFG_00 = 0xB7,
> + MAX77843_CHG_REG_CHG_CNFG_01 = 0xB8,
> + MAX77843_CHG_REG_CHG_CNFG_02 = 0xB9,
> + MAX77843_CHG_REG_CHG_CNFG_03 = 0xBA,
> + MAX77843_CHG_REG_CHG_CNFG_04 = 0xBB,
> + MAX77843_CHG_REG_CHG_CNFG_06 = 0xBD,
> + MAX77843_CHG_REG_CHG_CNFG_07 = 0xBE,
> + MAX77843_CHG_REG_CHG_CNFG_09 = 0xC0,
> + MAX77843_CHG_REG_CHG_CNFG_10 = 0xC1,
> + MAX77843_CHG_REG_CHG_CNFG_11 = 0xC2,
> + MAX77843_CHG_REG_CHG_CNFG_12 = 0xC3,
> +
> + MAX77843_CHG_REG_END,
> +};
> +
> +/* Fuel gauge registers */
> +enum max77843_fuelgauge {
> + MAX77843_FG_REG_STATUS = 0x00,
> + MAX77843_FG_REG_VALRT_TH = 0x01,
> + MAX77843_FG_REG_TALRT_TH = 0x02,
> + MAX77843_FG_REG_SALRT_TH = 0x03,
> + MAX77843_FG_RATE_AT_RATE = 0x04,
> + MAX77843_FG_REG_REMCAP_REP = 0x05,
> + MAX77843_FG_REG_SOCREP = 0x06,
> + MAX77843_FG_REG_AGE = 0x07,
> + MAX77843_FG_REG_TEMP = 0x08,
> + MAX77843_FG_REG_VCELL = 0x09,
> + MAX77843_FG_REG_CURRENT = 0x0A,
> + MAX77843_FG_REG_AVG_CURRENT = 0x0B,
> + MAX77843_FG_REG_SOCMIX = 0x0D,
> + MAX77843_FG_REG_SOCAV = 0x0E,
> + MAX77843_FG_REG_REMCAP_MIX = 0x0F,
> + MAX77843_FG_REG_FULLCAP = 0x10,
> + MAX77843_FG_REG_AVG_TEMP = 0x16,
> + MAX77843_FG_REG_CYCLES = 0x17,
> + MAX77843_FG_REG_AVG_VCELL = 0x19,
> + MAX77843_FG_REG_CONFIG = 0x1D,
> + MAX77843_FG_REG_REMCAP_AV = 0x1F,
> + MAX77843_FG_REG_FULLCAP_NOM = 0x23,
> + MAX77843_FG_REG_MISCCFG = 0x2B,
> + MAX77843_FG_REG_RCOMP = 0x38,
> + MAX77843_FG_REG_FSTAT = 0x3D,
> + MAX77843_FG_REG_DQACC = 0x45,
> + MAX77843_FG_REG_DPACC = 0x46,
> + MAX77843_FG_REG_OCV = 0xEE,
> + MAX77843_FG_REG_VFOCV = 0xFB,
> + MAX77843_FG_SOCVF = 0xFF,
> +
> + MAX77843_FG_END,
> +};
> +
> +/* MUIC registers */
> +enum max77843_muic_reg {
> + MAX77843_MUIC_REG_ID = 0x00,
> + MAX77843_MUIC_REG_INT1 = 0x01,
> + MAX77843_MUIC_REG_INT2 = 0x02,
> + MAX77843_MUIC_REG_INT3 = 0x03,
> + MAX77843_MUIC_REG_STATUS1 = 0x04,
> + MAX77843_MUIC_REG_STATUS2 = 0x05,
> + MAX77843_MUIC_REG_STATUS3 = 0x06,
> + MAX77843_MUIC_REG_INTMASK1 = 0x07,
> + MAX77843_MUIC_REG_INTMASK2 = 0x08,
> + MAX77843_MUIC_REG_INTMASK3 = 0x09,
> + MAX77843_MUIC_REG_CDETCTRL1 = 0x0A,
> + MAX77843_MUIC_REG_CDETCTRL2 = 0x0B,
> + MAX77843_MUIC_REG_CONTROL1 = 0x0C,
> + MAX77843_MUIC_REG_CONTROL2 = 0x0D,
> + MAX77843_MUIC_REG_CONTROL3 = 0x0E,
> + MAX77843_MUIC_REG_CONTROL4 = 0x16,
> + MAX77843_MUIC_REG_HVCONTROL1 = 0x17,
> + MAX77843_MUIC_REG_HVCONTROL2 = 0x18,
> +
> + MAX77843_MUIC_REG_END,
> +};
> +
> +enum max77843_irq {
> + /* Topsys: SYSTEM */
> + MAX77843_SYS_IRQ_SYSINTSRC_SYSUVLO_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_SYSOVLO_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_TSHDN_INT,
> + MAX77843_SYS_IRQ_SYSINTSRC_TM_INT,
> +
> + /* Charger: CHG_INT */
> + MAX77843_CHG_IRQ_CHG_INT_BYP_I,
> + MAX77843_CHG_IRQ_CHG_INT_BATP_I,
> + MAX77843_CHG_IRQ_CHG_INT_BAT_I,
> + MAX77843_CHG_IRQ_CHG_INT_CHG_I,
> + MAX77843_CHG_IRQ_CHG_INT_WCIN_I,
> + MAX77843_CHG_IRQ_CHG_INT_CHGIN_I,
> + MAX77843_CHG_IRQ_CHG_INT_AICL_I,
> +
> + MAX77843_IRQ_NUM,
> +};
> +
> +enum max77843_irq_muic {
> + /* MUIC: INT1 */
> + MAX77843_MUIC_IRQ_INT1_ADC,
> + MAX77843_MUIC_IRQ_INT1_ADCERROR,
> + MAX77843_MUIC_IRQ_INT1_ADC1K,
> +
> + /* MUIC: INT2 */
> + MAX77843_MUIC_IRQ_INT2_CHGTYP,
> + MAX77843_MUIC_IRQ_INT2_CHGDETRUN,
> + MAX77843_MUIC_IRQ_INT2_DCDTMR,
> + MAX77843_MUIC_IRQ_INT2_DXOVP,
> + MAX77843_MUIC_IRQ_INT2_VBVOLT,
> +
> + /* MUIC: INT3 */
> + MAX77843_MUIC_IRQ_INT3_VBADC,
> + MAX77843_MUIC_IRQ_INT3_VDNMON,
> + MAX77843_MUIC_IRQ_INT3_DNRES,
> + MAX77843_MUIC_IRQ_INT3_MPNACK,
> + MAX77843_MUIC_IRQ_INT3_MRXBUFOW,
> + MAX77843_MUIC_IRQ_INT3_MRXTRF,
> + MAX77843_MUIC_IRQ_INT3_MRXPERR,
> + MAX77843_MUIC_IRQ_INT3_MRXRDY,
> +
> + MAX77843_MUIC_IRQ_NUM,
> +};
> +
> +/* MAX77843 interrupts */
> +#define MAX77843_SYS_IRQ_SYSUVLO_INT BIT(0)
> +#define MAX77843_SYS_IRQ_SYSOVLO_INT BIT(1)
> +#define MAX77843_SYS_IRQ_TSHDN_INT BIT(2)
> +#define MAX77843_SYS_IRQ_TM_INT BIT(3)
> +
> +/* Max77843 charger insterrupts */
> +#define MAX77843_CHG_BYP_I BIT(0)
> +#define MAX77843_CHG_BATP_I BIT(2)
> +#define MAX77843_CHG_BAT_I BIT(3)
> +#define MAX77843_CHG_CHG_I BIT(4)
> +#define MAX77843_CHG_WCIN_I BIT(5)
> +#define MAX77843_CHG_CHGIN_I BIT(6)
> +#define MAX77843_CHG_AICL_I BIT(7)
> +
> +/* MAX77843 CHG_INT_OK register */
> +#define MAX77843_CHG_BYP_OK BIT(0)
> +#define MAX77843_CHG_BATP_OK BIT(2)
> +#define MAX77843_CHG_BAT_OK BIT(3)
> +#define MAX77843_CHG_CHG_OK BIT(4)
> +#define MAX77843_CHG_WCIN_OK BIT(5)
> +#define MAX77843_CHG_CHGIN_OK BIT(6)
> +#define MAX77843_CHG_AICL_OK BIT(7)
> +
> +/* MAX77843 CHG_DETAILS_00 register */
> +#define MAX77843_CHG_BAT_DTLS BIT(0)
> +
> +/* MAX77843 CHG_DETAILS_01 register */
> +#define MAX77843_CHG_DTLS_MASK 0x0f
> +#define MAX77843_CHG_PQ_MODE 0x00
> +#define MAX77843_CHG_CC_MODE 0x01
> +#define MAX77843_CHG_CV_MODE 0x02
> +#define MAX77843_CHG_TO_MODE 0x03
> +#define MAX77843_CHG_DO_MODE 0x04
> +#define MAX77843_CHG_HT_MODE 0x05
> +#define MAX77843_CHG_TF_MODE 0x06
> +#define MAX77843_CHG_TS_MODE 0x07
> +#define MAX77843_CHG_OFF_MODE 0x08
> +
> +#define MAX77843_CHG_BAT_DTLS_MASK 0xf0
> +#define MAX77843_CHG_NO_BAT (0x00 << 4)
> +#define MAX77843_CHG_LOW_VOLT_BAT (0x01 << 4)
> +#define MAX77843_CHG_LONG_BAT_TIME (0x02 << 4)
> +#define MAX77843_CHG_OK_BAT (0x03 << 4)
> +#define MAX77843_CHG_OK_LOW_VOLT_BAT (0x04 << 4)
> +#define MAX77843_CHG_OVER_VOLT_BAT (0x05 << 4)
> +#define MAX77843_CHG_OVER_CURRENT_BAT (0x06 << 4)
> +
> +/* MAX77843 CHG_CNFG_00 register */
> +#define MAX77843_CHG_DISABLE 0x00
> +#define MAX77843_CHG_ENABLE 0x05
> +#define MAX77843_CHG_MASK 0x01
> +#define MAX77843_CHG_BUCK_MASK 0x04
> +
> +/* MAX77843 CHG_CNFG_01 register */
> +#define MAX77843_CHG_RESTART_THRESHOLD_100 0x00
> +#define MAX77843_CHG_RESTART_THRESHOLD_150 0x10
> +#define MAX77843_CHG_RESTART_THRESHOLD_200 0x20
> +#define MAX77843_CHG_RESTART_THRESHOLD_DISABLE 0x30
> +
> +/* MAX77843 CHG_CNFG_02 register */
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MIN 100000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MAX 3150000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_STEP 50000
> +#define MAX77843_CHG_FAST_CHG_CURRENT_MASK 0x3f
> +#define MAX77843_CHG_OTG_ILIMIT_500 (0x00 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_900 (0x01 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_1200 (0x02 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_1500 (0x03 << 6)
> +#define MAX77843_CHG_OTG_ILIMIT_MASK 0xc0
> +
> +/* MAX77843 CHG_CNFG_03 register */
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MIN 125000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MAX 650000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_STEP 75000
> +#define MAX77843_CHG_TOP_OFF_CURRENT_MASK 0x07
> +
> +/* MAX77843 CHG_CNFG_06 register */
> +#define MAX77843_CHG_WRITE_CAP_BLOCK 0x10
> +#define MAX77843_CHG_WRITE_CAP_UNBLOCK 0x0C
> +
> +/* MAX77843_CHG_CNFG_09_register */
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN 100000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX 4000000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_REF 3367000
> +#define MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP 33000
> +
> +#define MAX77843_MUIC_ADC BIT(0)
> +#define MAX77843_MUIC_ADCERROR BIT(2)
> +#define MAX77843_MUIC_ADC1K BIT(3)
> +
> +#define MAX77843_MUIC_CHGTYP BIT(0)
> +#define MAX77843_MUIC_CHGDETRUN BIT(1)
> +#define MAX77843_MUIC_DCDTMR BIT(2)
> +#define MAX77843_MUIC_DXOVP BIT(3)
> +#define MAX77843_MUIC_VBVOLT BIT(4)
> +
> +#define MAX77843_MUIC_VBADC BIT(0)
> +#define MAX77843_MUIC_VDNMON BIT(1)
> +#define MAX77843_MUIC_DNRES BIT(2)
> +#define MAX77843_MUIC_MPNACK BIT(3)
> +#define MAX77843_MUIC_MRXBUFOW BIT(4)
> +#define MAX77843_MUIC_MRXTRF BIT(5)
> +#define MAX77843_MUIC_MRXPERR BIT(6)
> +#define MAX77843_MUIC_MRXRDY BIT(7)
> +
> +/* MAX77843 INTSRCMASK register */
> +#define MAX77843_INTSRCMASK_CHGR 0
> +#define MAX77843_INTSRCMASK_SYS 1
> +#define MAX77843_INTSRCMASK_FG 2
> +#define MAX77843_INTSRCMASK_MUIC 3
> +
> +#define MAX77843_INTSRCMASK_CHGR_MASK BIT(MAX77843_INTSRCMASK_CHGR)
> +#define MAX77843_INTSRCMASK_SYS_MASK BIT(MAX77843_INTSRCMASK_SYS)
> +#define MAX77843_INTSRCMASK_FG_MASK BIT(MAX77843_INTSRCMASK_FG)
> +#define MAX77843_INTSRCMASK_MUIC_MASK BIT(MAX77843_INTSRCMASK_MUIC)
> +
> +#define MAX77843_INTSRC_MASK_MASK \
> + (MAX77843_INTSRCMASK_MUIC_MASK | MAX77843_INTSRCMASK_FG_MASK | \
> + MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
> +
> +/* MAX77843 STATUS register*/
> +#define STATUS1_ADC_SHIFT 0
> +#define STATUS1_ADCERROR_SHIFT 6
> +#define STATUS1_ADC1K_SHIFT 7
> +#define STATUS2_CHGTYP_SHIFT 0
> +#define STATUS2_CHGDETRUN_SHIFT 3
> +#define STATUS2_DCDTMR_SHIFT 4
> +#define STATUS2_DXOVP_SHIFT 5
> +#define STATUS2_VBVOLT_SHIFT 6
> +#define STATUS3_VBADC_SHIFT 0
> +#define STATUS3_VDNMON_SHIFT 4
> +#define STATUS3_DNRES_SHIFT 5
> +#define STATUS3_MPNACK_SHIFT 6
> +
> +#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
> +#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
> +#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
> +
> +/* MAX77843 CONTROL register */
> +#define CONTROL1_COMP1SW_SHIFT 0
> +#define CONTROL1_COMP2SW_SHIFT 3
> +#define CONTROL1_IDBEN_SHIFT 7
> +#define CONTROL2_LOWPWR_SHIFT 0
> +#define CONTROL2_ADCEN_SHIFT 1
> +#define CONTROL2_CPEN_SHIFT 2
> +#define CONTROL2_ACC_DET_SHIFT 5
> +#define CONTROL2_USBCPINT_SHIFT 6
> +#define CONTROL2_RCPS_SHIFT 7
> +#define CONTROL3_JIGSET_SHIFT 0
> +#define CONTROL4_ADCDBSET_SHIFT 0
> +#define CONTROL4_USBAUTO_SHIFT 4
> +#define CONTROL4_FCTAUTO_SHIFT 5
> +#define CONTROL4_ADCMODE_SHIFT 6
> +
> +#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
> +#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
> +
> +/* MAX77843 switch port */
> +#define COM_OPEN 0
> +#define COM_USB 1
> +#define COM_AUDIO 2
> +#define COM_UART 3
> +#define COM_AUX_USB 4
> +#define COM_AUX_UART 5
> +
> +#define CONTROL1_COM_SW \
> + (MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
> + MAX77843_MUIC_CONTROL1_COMP2SW_MASK)
> +
> +#define CONTROL1_SW_OPEN \
> + (COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
> + COM_OPEN << CONTROL1_COMP2SW_SHIFT)
> +#define CONTROL1_SW_USB \
> + (COM_USB << CONTROL1_COMP1SW_SHIFT | \
> + COM_USB << CONTROL1_COMP2SW_SHIFT)
> +#define CONTROL1_SW_AUDIO \
> + (COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUDIO << CONTROL1_COMP2SW_SHIFT)
> +#define CONTROL1_SW_UART \
> + (COM_UART << CONTROL1_COMP1SW_SHIFT | \
> + COM_UART << CONTROL1_COMP2SW_SHIFT)
> +#define CONTROL1_SW_AUX_USB \
> + (COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_USB << CONTROL1_COMP2SW_SHIFT)
> +#define CONTROL1_SW_AUX_UART \
> + (COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_UART << CONTROL1_COMP2SW_SHIFT)
> +
> +#define MAX77843_DISABLE 0
> +#define MAX77843_ENABLE 1
> +
> +#define CONTROL4_AUTO_DISABLE \
> + (MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
> + (MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT)
> +#define CONTROL4_AUTO_ENABLE \
> + (MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
> + (MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT)
> +
> +/* MAX77843 SAFEOUT LDO Control register */
> +#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
> +#define SAFEOUTCTRL_SAFEOUT2_SHIFT 2
> +#define SAFEOUTCTRL_ENSAFEOUT1_SHIFT 6
> +#define SAFEOUTCTRL_ENSAFEOUT2_SHIFT 7
> +
> +#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1 \
> + BIT(SAFEOUTCTRL_ENSAFEOUT1_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2 \
> + BIT(SAFEOUTCTRL_ENSAFEOUT2_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK \
> + (0x3 << SAFEOUTCTRL_SAFEOUT1_SHIFT)
> +#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
> + (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
> +
> +struct max77843 {
> + struct device *dev;
> +
> + struct i2c_client *i2c;
> + struct i2c_client *i2c_chg;
> + struct i2c_client *i2c_fuel;
> + struct i2c_client *i2c_muic;
> +
> + struct regmap *regmap;
> + struct regmap *regmap_chg;
> + struct regmap *regmap_fuel;
> + struct regmap *regmap_muic;
> +
> + struct regmap_irq_chip_data *irq_data;
> + struct regmap_irq_chip_data *irq_data_chg;
> + struct regmap_irq_chip_data *irq_data_fuel;
> + struct regmap_irq_chip_data *irq_data_muic;
> +
> + int irq;
> +};
> +#endif /* __MAX77843_H__ */
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-04 12:01 ` Chanwoo Choi
@ 2015-02-16 13:42 ` Lee Jones
2015-02-16 13:48 ` Chanwoo Choi
0 siblings, 1 reply; 20+ messages in thread
From: Lee Jones @ 2015-02-16 13:42 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Jaewon Kim, linux-kernel, devicetree, linux-pm, Inki Dae,
SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Sebastian Reichel, Mark Brown, Beomho Seo
On Wed, 04 Feb 2015, Chanwoo Choi wrote:
> On 02/04/2015 01:56 PM, Jaewon Kim wrote:
> > This patch adds MAX77843 core/irq driver to support PMIC,
> > MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> > LED and Haptic device.
> >
> > Cc: Lee Jones <lee.jones@linaro.org>
> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> > ---
> > drivers/mfd/Kconfig | 14 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/max77843.c | 245 +++++++++++++++++++
> > include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
> > 4 files changed, 701 insertions(+)
> > create mode 100644 drivers/mfd/max77843.c
> > create mode 100644 include/linux/mfd/max77843-private.h
<LOTS OF POINTLESS LINES OF UNCHANGED/UNREVIEWED CODE>
> Looks good to me.
>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo,
If you're not going to make any comments, either put the Reviewed-by
at the top, or better still, snip out all of the bumph in the middle.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-16 13:42 ` Lee Jones
@ 2015-02-16 13:48 ` Chanwoo Choi
0 siblings, 0 replies; 20+ messages in thread
From: Chanwoo Choi @ 2015-02-16 13:48 UTC (permalink / raw)
To: Lee Jones
Cc: Jaewon Kim, linux-kernel, devicetree, linux-pm, Inki Dae,
SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Sebastian Reichel, Mark Brown, Beomho Seo
On 02/16/2015 10:42 PM, Lee Jones wrote:
> On Wed, 04 Feb 2015, Chanwoo Choi wrote:
>> On 02/04/2015 01:56 PM, Jaewon Kim wrote:
>>> This patch adds MAX77843 core/irq driver to support PMIC,
>>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
>>> LED and Haptic device.
>>>
>>> Cc: Lee Jones <lee.jones@linaro.org>
>>> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
>>> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
>>> ---
>>> drivers/mfd/Kconfig | 14 ++
>>> drivers/mfd/Makefile | 1 +
>>> drivers/mfd/max77843.c | 245 +++++++++++++++++++
>>> include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
>>> 4 files changed, 701 insertions(+)
>>> create mode 100644 drivers/mfd/max77843.c
>>> create mode 100644 include/linux/mfd/max77843-private.h
>
> <LOTS OF POINTLESS LINES OF UNCHANGED/UNREVIEWED CODE>
>
>> Looks good to me.
>>
>> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> Chanwoo,
>
> If you're not going to make any comments, either put the Reviewed-by
> at the top, or better still, snip out all of the bumph in the middle.
>
OK, I'll do according your comment.
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-04 4:56 ` [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver Jaewon Kim
2015-02-04 12:01 ` Chanwoo Choi
@ 2015-02-16 13:51 ` Lee Jones
2015-02-16 14:02 ` Krzysztof Kozłowski
2015-02-23 1:43 ` Jaewon Kim
1 sibling, 2 replies; 20+ messages in thread
From: Lee Jones @ 2015-02-16 13:51 UTC (permalink / raw)
To: Jaewon Kim
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Chanwoo Choi, Sebastian Reichel, Mark Brown, Beomho Seo
On Wed, 04 Feb 2015, Jaewon Kim wrote:
> This patch adds MAX77843 core/irq driver to support PMIC,
> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> LED and Haptic device.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> ---
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77843.c | 245 +++++++++++++++++++
> include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
> 4 files changed, 701 insertions(+)
> create mode 100644 drivers/mfd/max77843.c
> create mode 100644 include/linux/mfd/max77843-private.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2e6b731..0c67c79 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -442,6 +442,20 @@ config MFD_MAX77693
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77843
> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> + depends on I2C=y
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77843.
> + This is companion Power Management IC with LEDs, Haptic, Charger,
> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> + This driver provides common support for accessing the device;
> + additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> config MFD_MAX8907
> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 53467e2..fe4f75c 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
This is the 11th MAX driver. Can't they be supported using device
specific data structures instead of taking a 'one file per device'
approach?
> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> max8925-objs := max8925-core.o max8925-i2c.o
> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> new file mode 100644
> index 0000000..191a557
> --- /dev/null
> +++ b/drivers/mfd/max77843.c
> @@ -0,0 +1,245 @@
> +/*
> + * max77843.c - MFD core driver for the Maxim MAX77843
> + *
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>
> + * Author: Beomho Seo <beomho.seo@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max77843-private.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
[...]
> +static int max77843_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
Strange tabbing here.
> +{
> + struct max77843 *max77843;
> + unsigned int reg_data;
> + int ret;
> +
> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
> + if (!max77843)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, max77843);
> + max77843->dev = &i2c->dev;
> + max77843->i2c = i2c;
> + max77843->irq = i2c->irq;
> +
> + max77843->regmap = devm_regmap_init_i2c(i2c,
> + &max77843_regmap_config);
> + if (IS_ERR(max77843->regmap)) {
> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
> + return PTR_ERR(max77843->regmap);
> + }
> +
> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> + 0, &max77843_irq_chip, &max77843->irq_data);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> + return ret;
> + }
> +
> + ret = regmap_read(max77843->regmap,
> + MAX77843_SYS_REG_PMICID, ®_data);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
> + goto err_pmic_id;
> + }
> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
> +
> + ret = max77843_chg_init(max77843);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to init Charger\n");
> + goto err_pmic_id;
> + }
> +
> + ret = regmap_update_bits(max77843->regmap,
> + MAX77843_SYS_REG_INTSRCMASK,
> + MAX77843_INTSRC_MASK_MASK,
> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
This stuff looks so much better/easier to read if you line up against
the '('.
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
> + goto err_pmic_id;
> + }
> +
> + ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
> + ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to add mfd device\n");
> + goto err_pmic_id;
> + }
> +
> + device_init_wakeup(max77843->dev, 1);
> +
> + return 0;
> +
> +err_pmic_id:
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + return ret;
> +}
> +
> +static int max77843_remove(struct i2c_client *i2c)
> +{
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(max77843->dev);
> +
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> +
> + i2c_unregister_device(max77843->i2c_chg);
> + i2c_unregister_device(max77843->i2c);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id max77843_dt_match[] = {
> + { .compatible = "maxim,max77843", },
> + { /* sentinel */ },
> +};
> +
> +static const struct i2c_device_id max77843_id[] = {
> + { "max77843", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i2c, max77843_id);
> +
> +static int __maybe_unused max77843_suspend(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(max77843->irq);
> + disable_irq(max77843->irq);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused max77843_resume(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(max77843->irq);
> + enable_irq(max77843->irq);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
> +
> +static struct i2c_driver max77843_i2c_driver = {
> + .driver = {
More strange whitespace stuff.
I'm gussing you haven't run checkpatch.pl.
Please do so and fix-up the warnings.
> + .name = "max77843",
> + .pm = &max77843_pm,
> + .of_match_table = max77843_dt_match,
> + },
Lining these up with the '=' doesn't make the code any better IMO.
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-16 13:51 ` Lee Jones
@ 2015-02-16 14:02 ` Krzysztof Kozłowski
2015-02-23 1:43 ` Jaewon Kim
1 sibling, 0 replies; 20+ messages in thread
From: Krzysztof Kozłowski @ 2015-02-16 14:02 UTC (permalink / raw)
To: Lee Jones
Cc: Jaewon Kim, linux-kernel, devicetree, linux-pm, Inki Dae,
SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Chanwoo Choi, Sebastian Reichel, Mark Brown,
Beomho Seo
2015-02-16 14:51 GMT+01:00 Lee Jones <lee.jones@linaro.org>:
> On Wed, 04 Feb 2015, Jaewon Kim wrote:
>
>> This patch adds MAX77843 core/irq driver to support PMIC,
>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
>> LED and Haptic device.
>>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
>> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
>> ---
>> drivers/mfd/Kconfig | 14 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/max77843.c | 245 +++++++++++++++++++
>> include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
>> 4 files changed, 701 insertions(+)
>> create mode 100644 drivers/mfd/max77843.c
>> create mode 100644 include/linux/mfd/max77843-private.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 2e6b731..0c67c79 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -442,6 +442,20 @@ config MFD_MAX77693
>> additional drivers must be enabled in order to use the functionality
>> of the device.
>>
>> +config MFD_MAX77843
>> + bool "Maxim Semiconductor MAX77843 PMIC Support"
>> + depends on I2C=y
>> + select MFD_CORE
>> + select REGMAP_I2C
>> + select REGMAP_IRQ
>> + help
>> + Say yes here to add support for Maxim Semiconductor MAX77843.
>> + This is companion Power Management IC with LEDs, Haptic, Charger,
>> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
>> + This driver provides common support for accessing the device;
>> + additional drivers must be enabled in order to use the functionality
>> + of the device.
>> +
>> config MFD_MAX8907
>> tristate "Maxim Semiconductor MAX8907 PMIC Support"
>> select MFD_CORE
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..fe4f75c 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
>> obj-$(CONFIG_MFD_MAX14577) += max14577.o
>> obj-$(CONFIG_MFD_MAX77686) += max77686.o
>> obj-$(CONFIG_MFD_MAX77693) += max77693.o
>> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
>
> This is the 11th MAX driver. Can't they be supported using device
> specific data structures instead of taking a 'one file per device'
> approach?
We did this for max14577+max77836 and max77686+max77802. I didn't see
the specs of max77843 but I think in many cases other and newer
drivers could be merged. Someone needs to advocate for this...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 1/6] mfd: max77843: Add max77843 MFD driver core driver
2015-02-16 13:51 ` Lee Jones
2015-02-16 14:02 ` Krzysztof Kozłowski
@ 2015-02-23 1:43 ` Jaewon Kim
1 sibling, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-23 1:43 UTC (permalink / raw)
To: Lee Jones
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Chanwoo Choi, Sebastian Reichel, Mark Brown, Beomho Seo
Hi Lee Jones,
On 02/16/2015 10:51 PM, Lee Jones wrote:
> On Wed, 04 Feb 2015, Jaewon Kim wrote:
>
>> This patch adds MAX77843 core/irq driver to support PMIC,
>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
>> LED and Haptic device.
>>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
>> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
>> ---
>> drivers/mfd/Kconfig | 14 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/max77843.c | 245 +++++++++++++++++++
>> include/linux/mfd/max77843-private.h | 441 ++++++++++++++++++++++++++++++++++
>> 4 files changed, 701 insertions(+)
>> create mode 100644 drivers/mfd/max77843.c
>> create mode 100644 include/linux/mfd/max77843-private.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 2e6b731..0c67c79 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -442,6 +442,20 @@ config MFD_MAX77693
>> additional drivers must be enabled in order to use the functionality
>> of the device.
>>
>> +config MFD_MAX77843
>> + bool "Maxim Semiconductor MAX77843 PMIC Support"
>> + depends on I2C=y
>> + select MFD_CORE
>> + select REGMAP_I2C
>> + select REGMAP_IRQ
>> + help
>> + Say yes here to add support for Maxim Semiconductor MAX77843.
>> + This is companion Power Management IC with LEDs, Haptic, Charger,
>> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
>> + This driver provides common support for accessing the device;
>> + additional drivers must be enabled in order to use the functionality
>> + of the device.
>> +
>> config MFD_MAX8907
>> tristate "Maxim Semiconductor MAX8907 PMIC Support"
>> select MFD_CORE
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..fe4f75c 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
>> obj-$(CONFIG_MFD_MAX14577) += max14577.o
>> obj-$(CONFIG_MFD_MAX77686) += max77686.o
>> obj-$(CONFIG_MFD_MAX77693) += max77693.o
>> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> This is the 11th MAX driver. Can't they be supported using device
> specific data structures instead of taking a 'one file per device'
> approach?
Kzysztof answered already, we try to merge with other files.
But MAX77843 can`t merge with another MAX drivers.
Because This driver has new features (e.g AFC charger, Reverse Boost, 4
channel LED driver, etc)
so new registers extended and moved.
>
>> obj-$(CONFIG_MFD_MAX8907) += max8907.o
>> max8925-objs := max8925-core.o max8925-i2c.o
>> obj-$(CONFIG_MFD_MAX8925) += max8925.o
>> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
>> new file mode 100644
>> index 0000000..191a557
>> --- /dev/null
>> +++ b/drivers/mfd/max77843.c
>> @@ -0,0 +1,245 @@
>> +/*
>> + * max77843.c - MFD core driver for the Maxim MAX77843
>> + *
>> + * Copyright (C) 2015 Samsung Electronics
>> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>
>> + * Author: Beomho Seo <beomho.seo@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/max77843-private.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
> [...]
>
>> +static int max77843_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
> Strange tabbing here.
I will fix it in next version.
>
>> +{
>> + struct max77843 *max77843;
>> + unsigned int reg_data;
>> + int ret;
>> +
>> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
>> + if (!max77843)
>> + return -ENOMEM;
>> +
>> + i2c_set_clientdata(i2c, max77843);
>> + max77843->dev = &i2c->dev;
>> + max77843->i2c = i2c;
>> + max77843->irq = i2c->irq;
>> +
>> + max77843->regmap = devm_regmap_init_i2c(i2c,
>> + &max77843_regmap_config);
>> + if (IS_ERR(max77843->regmap)) {
>> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
>> + return PTR_ERR(max77843->regmap);
>> + }
>> +
>> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
>> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
>> + 0, &max77843_irq_chip, &max77843->irq_data);
>> + if (ret) {
>> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
>> + return ret;
>> + }
>> +
>> + ret = regmap_read(max77843->regmap,
>> + MAX77843_SYS_REG_PMICID, ®_data);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
>> + goto err_pmic_id;
>> + }
>> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
>> +
>> + ret = max77843_chg_init(max77843);
>> + if (ret) {
>> + dev_err(&i2c->dev, "Failed to init Charger\n");
>> + goto err_pmic_id;
>> + }
>> +
>> + ret = regmap_update_bits(max77843->regmap,
>> + MAX77843_SYS_REG_INTSRCMASK,
>> + MAX77843_INTSRC_MASK_MASK,
>> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
> This stuff looks so much better/easier to read if you line up against
> the '('.
Okay, I will line up against '('.
>
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
>> + goto err_pmic_id;
>> + }
>> +
>> + ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
>> + ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Failed to add mfd device\n");
>> + goto err_pmic_id;
>> + }
>> +
>> + device_init_wakeup(max77843->dev, 1);
>> +
>> + return 0;
>> +
>> +err_pmic_id:
>> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
>> +
>> + return ret;
>> +}
>> +
>> +static int max77843_remove(struct i2c_client *i2c)
>> +{
>> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
>> +
>> + mfd_remove_devices(max77843->dev);
>> +
>> + regmap_del_irq_chip(max77843->irq, max77843->irq_data);
>> +
>> + i2c_unregister_device(max77843->i2c_chg);
>> + i2c_unregister_device(max77843->i2c);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id max77843_dt_match[] = {
>> + { .compatible = "maxim,max77843", },
>> + { /* sentinel */ },
>> +};
>> +
>> +static const struct i2c_device_id max77843_id[] = {
>> + { "max77843", },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(i2c, max77843_id);
>> +
>> +static int __maybe_unused max77843_suspend(struct device *dev)
>> +{
>> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
>> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
>> +
>> + if (device_may_wakeup(dev))
>> + enable_irq_wake(max77843->irq);
>> + disable_irq(max77843->irq);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused max77843_resume(struct device *dev)
>> +{
>> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
>> + struct max77843 *max77843 = i2c_get_clientdata(i2c);
>> +
>> + if (device_may_wakeup(dev))
>> + disable_irq_wake(max77843->irq);
>> + enable_irq(max77843->irq);
>> +
>> + return 0;
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
>> +
>> +static struct i2c_driver max77843_i2c_driver = {
>> + .driver = {
> More strange whitespace stuff.
>
> I'm gussing you haven't run checkpatch.pl.
>
> Please do so and fix-up the warnings.
".drivers" is seven letters. So, it seems like a white space but it is tab
Anyway, I will not lining up driver structure in next version.
>
>> + .name = "max77843",
>> + .pm = &max77843_pm,
>> + .of_match_table = max77843_dt_match,
>> + },
> Lining these up with the '=' doesn't make the code any better IMO.
>
> [...]
>
Thanks to review my patch.
I will send version4 soon.
Thanks,
Jaewon Kim
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 2/6] extcon: max77843: Add max77843 MUIC driver
2015-02-04 4:56 ` Jaewon Kim
(?)
(?)
@ 2015-02-04 4:56 ` Jaewon Kim
2015-02-04 23:46 ` Chanwoo Choi
-1 siblings, 1 reply; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch adds MAX77843 extcon driver to support for MUIC(Micro
USB Interface Controller) device by using EXTCON subsystem to handle
various external connectors.
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by : Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/extcon/Kconfig | 10 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-max77843.c | 881 ++++++++++++++++++++++++++++++++++++++
3 files changed, 892 insertions(+)
create mode 100644 drivers/extcon/extcon-max77843.c
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 6a1f7de..0b67538 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -55,6 +55,16 @@ config EXTCON_MAX77693
Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
detector and switch.
+config EXTCON_MAX77843
+ tristate "MAX77843 EXTCON Support"
+ depends on MFD_MAX77843
+ select IRQ_DOMAIN
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
+ detector add switch.
+
config EXTCON_MAX8997
tristate "MAX8997 EXTCON Support"
depends on MFD_MAX8997 && IRQ_DOMAIN
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 0370b42..f21d5c4 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
+obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
new file mode 100644
index 0000000..598a017
--- /dev/null
+++ b/drivers/extcon/extcon-max77843.c
@@ -0,0 +1,881 @@
+/*
+ * extcon-max77843.c - Maxim MAX77843 extcon driver to support
+ * MUIC(Micro USB Interface Controller)
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/extcon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */
+
+enum max77843_muic_status {
+ MAX77843_MUIC_STATUS1 = 0,
+ MAX77843_MUIC_STATUS2,
+ MAX77843_MUIC_STATUS3,
+
+ MAX77843_MUIC_STATUS_NUM,
+};
+
+struct max77843_muic_info {
+ struct device *dev;
+ struct max77843 *max77843;
+ struct extcon_dev *edev;
+
+ struct mutex mutex;
+ struct work_struct irq_work;
+ struct delayed_work wq_detcable;
+
+ u8 status[MAX77843_MUIC_STATUS_NUM];
+ int prev_cable_type;
+ int prev_chg_type;
+ int prev_gnd_type;
+
+ bool irq_adc;
+ bool irq_chg;
+};
+
+enum max77843_muic_cable_group {
+ MAX77843_CABLE_GROUP_ADC = 0,
+ MAX77843_CABLE_GROUP_ADC_GND,
+ MAX77843_CABLE_GROUP_CHG,
+};
+
+enum max77843_muic_adc_debounce_time {
+ MAX77843_DEBOUNCE_TIME_5MS = 0,
+ MAX77843_DEBOUNCE_TIME_10MS,
+ MAX77843_DEBOUNCE_TIME_25MS,
+ MAX77843_DEBOUNCE_TIME_38_62MS,
+};
+
+/* Define accessory cable type */
+enum max77843_muic_accessory_type {
+ MAX77843_MUIC_ADC_GROUND = 0,
+ MAX77843_MUIC_ADC_SEND_END_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
+ MAX77843_MUIC_ADC_RESERVED_ACC_1,
+ MAX77843_MUIC_ADC_RESERVED_ACC_2,
+ MAX77843_MUIC_ADC_RESERVED_ACC_3,
+ MAX77843_MUIC_ADC_RESERVED_ACC_4,
+ MAX77843_MUIC_ADC_RESERVED_ACC_5,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
+ MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
+ MAX77843_MUIC_ADC_TTY_CONVERTER,
+ MAX77843_MUIC_ADC_UART_CABLE,
+ MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
+ MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
+ MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
+ MAX77843_MUIC_ADC_OPEN,
+
+ /* The blow accessories should check
+ not only ADC value but also ADC1K and VBVolt value. */
+ /* Offset|ADC1K|VBVolt| */
+ MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */
+ MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */
+ MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */
+ MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */
+};
+
+/* Define charger cable type */
+enum max77843_muic_charger_type {
+ MAX77843_MUIC_CHG_NONE = 0,
+ MAX77843_MUIC_CHG_USB,
+ MAX77843_MUIC_CHG_DOWNSTREAM,
+ MAX77843_MUIC_CHG_DEDICATED,
+ MAX77843_MUIC_CHG_SPECIAL_500MA,
+ MAX77843_MUIC_CHG_SPECIAL_1A,
+ MAX77843_MUIC_CHG_SPECIAL_BIAS,
+ MAX77843_MUIC_CHG_RESERVED,
+ MAX77843_MUIC_CHG_GND,
+};
+
+enum {
+ MAX77843_CABLE_USB = 0,
+ MAX77843_CABLE_USB_HOST,
+ MAX77843_CABLE_TA,
+ MAX77843_CABLE_CHARGE_DOWNSTREAM,
+ MAX77843_CABLE_FAST_CHARGER,
+ MAX77843_CABLE_SLOW_CHARGER,
+ MAX77843_CABLE_MHL,
+ MAX77843_CABLE_MHL_TA,
+ MAX77843_CABLE_JIG_USB_ON,
+ MAX77843_CABLE_JIG_USB_OFF,
+ MAX77843_CABLE_JIG_UART_ON,
+ MAX77843_CABLE_JIG_UART_OFF,
+
+ MAX77843_CABLE_NUM,
+};
+
+static const char *max77843_extcon_cable[] = {
+ [MAX77843_CABLE_USB] = "USB",
+ [MAX77843_CABLE_USB_HOST] = "USB-HOST",
+ [MAX77843_CABLE_TA] = "TA",
+ [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
+ [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
+ [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
+ [MAX77843_CABLE_MHL] = "MHL",
+ [MAX77843_CABLE_MHL_TA] = "MHL-TA",
+ [MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
+ [MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
+ [MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+ [MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+};
+
+struct max77843_muic_irq {
+ unsigned int irq;
+ const char *name;
+ unsigned int virq;
+};
+
+static struct max77843_muic_irq max77843_muic_irqs[] = {
+ { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
+ { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
+ { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
+ { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
+ { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
+ { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
+ { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
+ { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
+ { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
+ { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
+ { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
+ { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
+ { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
+ { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
+ { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
+ { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
+};
+
+static const struct regmap_config max77843_muic_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_MUIC_REG_END,
+};
+
+static const struct regmap_irq max77843_muic_irq[] = {
+ /* INT1 interrupt */
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
+
+ /* INT2 interrupt */
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
+
+ /* INT3 interrupt */
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
+};
+
+static const struct regmap_irq_chip max77843_muic_irq_chip = {
+ .name = "max77843-muic",
+ .status_base = MAX77843_MUIC_REG_INT1,
+ .mask_base = MAX77843_MUIC_REG_INTMASK1,
+ .mask_invert = true,
+ .num_regs = 3,
+ .irqs = max77843_muic_irq,
+ .num_irqs = ARRAY_SIZE(max77843_muic_irq),
+};
+
+static int max77843_muic_set_path(struct max77843_muic_info *info,
+ u8 val, bool attached)
+{
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+ unsigned int ctrl1, ctrl2;
+
+ if (attached)
+ ctrl1 = val;
+ else
+ ctrl1 = CONTROL1_SW_OPEN;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL1,
+ CONTROL1_COM_SW, ctrl1);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot switch MUIC port\n");
+ return ret;
+ }
+
+ if (attached)
+ ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
+ else
+ ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL2,
+ MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
+ MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot update lowpower mode\n");
+ return ret;
+ }
+
+ dev_dbg(info->dev,
+ "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+ ctrl1, ctrl2, attached ? "attached" : "detached");
+
+ return 0;
+}
+
+static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
+ enum max77843_muic_cable_group group, bool *attached)
+{
+ int adc, chg_type, cable_type, gnd_type;
+
+ adc = info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC_MASK;
+ adc >>= STATUS1_ADC_SHIFT;
+
+ switch (group) {
+ case MAX77843_CABLE_GROUP_ADC:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_cable_type;
+ info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+ cable_type = info->prev_cable_type = adc;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_CHG:
+ chg_type = info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_CHGTYP_MASK;
+
+ /* Check GROUND accessory with charger cable */
+ if (adc == MAX77843_MUIC_ADC_GROUND) {
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ /* The following state when charger cable is
+ * disconnected but the GROUND accessory still
+ * connected */
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+
+ /* The following state when charger cable is
+ * connected on the GROUND accessory */
+ *attached = true;
+ cable_type = MAX77843_MUIC_CHG_GND;
+ info->prev_chg_type = MAX77843_MUIC_CHG_GND;
+ }
+ break;
+ }
+
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+ *attached = true;
+ cable_type = info->prev_chg_type = chg_type;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_ADC_GND:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_gnd_type;
+ info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+
+ /* Offset|ADC1K|VBVolt|
+ * 0x1| 0| 0| USB-HOST
+ * 0x1| 0| 1| USB-HOST with VB
+ * 0x1| 1| 0| MHL
+ * 0x1| 1| 1| MHL with VB */
+ /* Get ADC1K register bit */
+ gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC1K_MASK);
+
+ /* Get VBVolt register bit */
+ gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_VBVOLT_MASK);
+ gnd_type >>= STATUS2_VBVOLT_SHIFT;
+
+ /* Offset of GND cable */
+ gnd_type |= MAX77843_MUIC_GND_USB_HOST;
+ cable_type = info->prev_gnd_type = gnd_type;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Unknown cable group (%d)\n", group);
+ cable_type = -EINVAL;
+ break;
+ }
+
+ return cable_type;
+}
+
+static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
+{
+ int ret, gnd_cable_type;
+ bool attached;
+
+ gnd_cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+ dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+
+ switch (gnd_cable_type) {
+ case MAX77843_MUIC_GND_USB_HOST:
+ case MAX77843_MUIC_GND_USB_HOST_VB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB-HOST", attached);
+ break;
+ case MAX77843_MUIC_GND_MHL_VB:
+ case MAX77843_MUIC_GND_MHL:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "MHL", attached);
+ break;
+ default:
+ dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_jig_handler(struct max77843_muic_info *info,
+ int cable_type, bool attached)
+{
+ int ret;
+
+ dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
+ attached ? "attached" : "detached", cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+ break;
+ default:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_adc_handler(struct max77843_muic_info *info)
+{
+ int ret, cable_type;
+ bool attached;
+
+ cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type,
+ info->prev_cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_GROUND:
+ ret = max77843_muic_adc_gnd_handler(info);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_jig_handler(info, cable_type, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_SEND_END_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_1:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_2:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_3:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_4:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_5:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
+ case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
+ case MAX77843_MUIC_ADC_TTY_CONVERTER:
+ case MAX77843_MUIC_ADC_UART_CABLE:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
+ case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
+ case MAX77843_MUIC_ADC_OPEN:
+ dev_err(info->dev,
+ "accessory is %s but it isn't used (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EAGAIN;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_chg_handler(struct max77843_muic_info *info)
+{
+ int ret, chg_type, gnd_type;
+ bool attached;
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+ attached ? "attached" : "detached",
+ chg_type, info->prev_chg_type);
+
+ switch (chg_type) {
+ case MAX77843_MUIC_CHG_USB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB", attached);
+ break;
+ case MAX77843_MUIC_CHG_DOWNSTREAM:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev,
+ "CHARGER-DOWNSTREAM", attached);
+ break;
+ case MAX77843_MUIC_CHG_DEDICATED:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "TA", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_500MA:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_1A:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_GND:
+ gnd_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+
+ /* Charger cable on MHL accessory is attach or detach */
+ if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
+ extcon_set_cable_state(info->edev, "MHL-TA", true);
+ else if (gnd_type == MAX77843_MUIC_GND_MHL)
+ extcon_set_cable_state(info->edev, "MHL-TA", false);
+ break;
+ case MAX77843_MUIC_CHG_NONE:
+ break;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (chg_type:0x%x)\n",
+ attached ? "attached" : "detached", chg_type);
+
+ max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void max77843_muic_irq_work(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(work,
+ struct max77843_muic_info, irq_work);
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->irq_adc) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown cable type\n");
+ info->irq_adc = false;
+ }
+
+ if (info->irq_chg) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown charger type\n");
+ info->irq_chg = false;
+ }
+
+ mutex_unlock(&info->mutex);
+}
+
+static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
+{
+ struct max77843_muic_info *info = data;
+ int i, irq_type = -1;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
+ if (irq == max77843_muic_irqs[i].virq)
+ irq_type = max77843_muic_irqs[i].irq;
+
+ switch (irq_type) {
+ case MAX77843_MUIC_IRQ_INT1_ADC:
+ case MAX77843_MUIC_IRQ_INT1_ADCERROR:
+ case MAX77843_MUIC_IRQ_INT1_ADC1K:
+ info->irq_adc = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT2_CHGTYP:
+ case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
+ case MAX77843_MUIC_IRQ_INT2_DCDTMR:
+ case MAX77843_MUIC_IRQ_INT2_DXOVP:
+ case MAX77843_MUIC_IRQ_INT2_VBVOLT:
+ info->irq_chg = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT3_VBADC:
+ case MAX77843_MUIC_IRQ_INT3_VDNMON:
+ case MAX77843_MUIC_IRQ_INT3_DNRES:
+ case MAX77843_MUIC_IRQ_INT3_MPNACK:
+ case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
+ case MAX77843_MUIC_IRQ_INT3_MRXTRF:
+ case MAX77843_MUIC_IRQ_INT3_MRXPERR:
+ case MAX77843_MUIC_IRQ_INT3_MRXRDY:
+ break;
+ default:
+ dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
+ break;
+ }
+
+ schedule_work(&info->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void max77843_muic_detect_cable_wq(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(to_delayed_work(work),
+ struct max77843_muic_info, wq_detcable);
+ struct max77843 *max77843 = info->max77843;
+ int chg_type, adc, ret;
+ bool attached;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ goto err_cable_wq;
+ }
+
+ adc = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+ if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+ if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect charger accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+err_cable_wq:
+ mutex_unlock(&info->mutex);
+}
+
+static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
+ enum max77843_muic_adc_debounce_time time)
+{
+ struct max77843 *max77843 = info->max77843;
+ unsigned int ret;
+
+ switch (time) {
+ case MAX77843_DEBOUNCE_TIME_5MS:
+ case MAX77843_DEBOUNCE_TIME_10MS:
+ case MAX77843_DEBOUNCE_TIME_25MS:
+ case MAX77843_DEBOUNCE_TIME_38_62MS:
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
+ time << CONTROL4_ADCDBSET_SHIFT);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot write MUIC regmap\n");
+ return ret;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Invalid ADC debounce time\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_init_muic_regmap(struct max77843 *max77843)
+{
+ int ret;
+
+ max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
+ I2C_ADDR_MUIC);
+ if (!max77843->i2c_muic) {
+ dev_err(&max77843->i2c->dev,
+ "Cannot allocate I2C device for MUIC\n");
+ return PTR_ERR(max77843->i2c_muic);
+ }
+
+ i2c_set_clientdata(max77843->i2c_muic, max77843);
+
+ max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
+ &max77843_muic_regmap_config);
+ if (IS_ERR(max77843->regmap_muic)) {
+ ret = PTR_ERR(max77843->regmap_muic);
+ goto err_muic_i2c;
+ }
+
+ ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+ 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
+ if (ret < 0) {
+ dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
+ goto err_muic_i2c;
+ }
+
+ return 0;
+
+err_muic_i2c:
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_muic_info *info;
+ unsigned int id;
+ int i, ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &pdev->dev;
+ info->max77843 = max77843;
+
+ platform_set_drvdata(pdev, info);
+ mutex_init(&info->mutex);
+
+ /* Initialize i2c and regmap */
+ ret = max77843_init_muic_regmap(max77843);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
+ return ret;
+ }
+
+ /* Turn off auto detection configuration */
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
+ MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
+ CONTROL4_AUTO_DISABLE);
+
+ /* Initialize extcon device */
+ info->edev = devm_extcon_dev_allocate(&pdev->dev,
+ max77843_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
+ ret = -ENODEV;
+ goto err_muic_irq;
+ }
+
+ ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register extcon device\n");
+ goto err_muic_irq;
+ }
+
+ /* Set ADC debounce time */
+ max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
+
+ /* Set initial path for UART */
+ max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+
+ /* Check revision number of MUIC device */
+ ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read revision number\n");
+ goto err_muic_irq;
+ }
+ dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
+
+ /* Support virtual irq domain for max77843 MUIC device */
+ INIT_WORK(&info->irq_work, max77843_muic_irq_work);
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
+ struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
+ unsigned int virq = 0;
+
+ virq = regmap_irq_get_virq(max77843->irq_data_muic,
+ muic_irq->irq);
+ if (virq <= 0) {
+ ret = -EINVAL;
+ goto err_muic_irq;
+ }
+ muic_irq->virq = virq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+ max77843_muic_irq_handler, IRQF_NO_SUSPEND,
+ muic_irq->name, info);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request irq (IRQ: %d, error: %d)\n",
+ muic_irq->irq, ret);
+ goto err_muic_irq;
+ }
+ }
+
+ /* Detect accessory after completing the initialization of platform */
+ INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
+ queue_delayed_work(system_power_efficient_wq,
+ &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+ return 0;
+
+err_muic_irq:
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_remove(struct platform_device *pdev)
+{
+ struct max77843_muic_info *info = platform_get_drvdata(pdev);
+ struct max77843 *max77843 = info->max77843;
+
+ cancel_work_sync(&info->irq_work);
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_muic_id[] = {
+ { "max77843-muic", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, max77843_muic_id);
+
+static struct platform_driver max77843_muic_driver = {
+ .driver = {
+ .name = "max77843-muic",
+ },
+ .probe = max77843_muic_probe,
+ .remove = max77843_muic_remove,
+ .id_table = max77843_muic_id,
+};
+
+static int __init max77843_muic_init(void)
+{
+ return platform_driver_register(&max77843_muic_driver);
+}
+subsys_initcall(max77843_muic_init);
+
+MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 2/6] extcon: max77843: Add max77843 MUIC driver
2015-02-04 4:56 ` [PATCH v3 2/6] extcon: max77843: Add max77843 MUIC driver Jaewon Kim
@ 2015-02-04 23:46 ` Chanwoo Choi
0 siblings, 0 replies; 20+ messages in thread
From: Chanwoo Choi @ 2015-02-04 23:46 UTC (permalink / raw)
To: Jaewon Kim
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Lee Jones, Sebastian Reichel, Mark Brown, Beomho Seo
Hi Jaewon,
On 02/04/2015 01:56 PM, Jaewon Kim wrote:
> This patch adds MAX77843 extcon driver to support for MUIC(Micro
> USB Interface Controller) device by using EXTCON subsystem to handle
> various external connectors.
>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Acked-by : Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/extcon/Kconfig | 10 +
> drivers/extcon/Makefile | 1 +
> drivers/extcon/extcon-max77843.c | 881 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 892 insertions(+)
> create mode 100644 drivers/extcon/extcon-max77843.c
Applied it. Thanks.
Thanks,
Chanwoo Choi
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 3/6] power: max77843_charger: Add Max77843 charger device driver
2015-02-04 4:56 ` Jaewon Kim
` (2 preceding siblings ...)
(?)
@ 2015-02-04 4:56 ` Jaewon Kim
-1 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
From: Beomho Seo <beomho.seo@samsung.com>
This patch adds device driver of max77843 charger. This driver provide
initialize each charging mode(e.g. fast charge, top-off mode and constant
charging mode so on.). Additionally, control charging paramters to use
i2c interface.
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/max77843_charger.c | 508 ++++++++++++++++++++++++++++++++++++++
3 files changed, 516 insertions(+)
create mode 100644 drivers/power/max77843_charger.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 0108c2a..a054a28 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -332,6 +332,13 @@ config CHARGER_MAX14577
Say Y to enable support for the battery charger control sysfs and
platform data of MAX14577/77836 MUICs.
+config CHARGER_MAX77843
+ tristate "Maxim MAX77843 battery charger driver"
+ depends on MFD_MAX77843
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX77843
+
config CHARGER_MAX8997
tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
depends on MFD_MAX8997 && REGULATOR_MAX8997
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index dfa8942..212c6a2 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
+obj-$(CONFIG_CHARGER_MAX77843) += max77843_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
diff --git a/drivers/power/max77843_charger.c b/drivers/power/max77843_charger.c
new file mode 100644
index 0000000..392eebc1a
--- /dev/null
+++ b/drivers/power/max77843_charger.c
@@ -0,0 +1,508 @@
+/*
+ * Charger driver for Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max77843-private.h>
+
+struct max77843_charger_info {
+ u32 fast_charge_uamp;
+ u32 top_off_uamp;
+ u32 input_uamp_limit;
+};
+
+struct max77843_charger {
+ struct device *dev;
+ struct max77843 *max77843;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct power_supply psy;
+
+ struct max77843_charger_info *info;
+};
+
+static int max77843_charger_get_max_current(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = 0;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_09, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read max current register: %d\n", ret);
+ return ret;
+ }
+
+ if (reg_data <= 0x03) {
+ val = MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN;
+ } else if (reg_data >= 0x78) {
+ val = MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX;
+ } else {
+ val = reg_data / 3;
+ if (reg_data % 3 == 0)
+ val *= 100000;
+ else if (reg_data % 3 == 1)
+ val = val * 100000 + 33000;
+ else
+ val = val * 100000 + 67000;
+ }
+
+ return val;
+}
+
+static int max77843_charger_get_now_current(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = 0;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read charge current register: %d\n", ret);
+ return ret;
+ }
+
+ reg_data &= MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (reg_data <= 0x02)
+ val = MAX77843_CHG_FAST_CHG_CURRENT_MIN;
+ else if (reg_data >= 0x3f)
+ val = MAX77843_CHG_FAST_CHG_CURRENT_MAX;
+ else
+ val = reg_data * MAX77843_CHG_FAST_CHG_CURRENT_STEP;
+
+ return val;
+}
+
+static int max77843_charger_get_online(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = 0;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_INT_OK, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read charger status: %d\n", ret);
+ return ret;
+ }
+
+ if (reg_data & MAX77843_CHG_CHGIN_OK)
+ val = true;
+ else
+ val = false;
+
+ return val;
+}
+
+static int max77843_charger_get_present(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = 0;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_DTLS_00, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read battery present: %d\n", ret);
+ return ret;
+ }
+
+ if (reg_data & MAX77843_CHG_BAT_DTLS)
+ val = false;
+ else
+ val = true;
+
+ return val;
+}
+
+static int max77843_charger_get_health(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = POWER_SUPPLY_HEALTH_UNKNOWN;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_DTLS_01, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read battery health: %d\n", ret);
+ return ret;
+ }
+
+ reg_data &= MAX77843_CHG_BAT_DTLS_MASK;
+
+ switch (reg_data) {
+ case MAX77843_CHG_NO_BAT:
+ val = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ case MAX77843_CHG_LOW_VOLT_BAT:
+ case MAX77843_CHG_OK_BAT:
+ case MAX77843_CHG_OK_LOW_VOLT_BAT:
+ val = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case MAX77843_CHG_LONG_BAT_TIME:
+ val = POWER_SUPPLY_HEALTH_DEAD;
+ break;
+ case MAX77843_CHG_OVER_VOLT_BAT:
+ case MAX77843_CHG_OVER_CURRENT_BAT:
+ val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+ default:
+ val = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+
+ return val;
+}
+
+static int max77843_charger_get_status(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret, val = 0;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_DTLS_01, ®_data);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to read charger status: %d\n", ret);
+ return ret;
+ }
+
+ reg_data &= MAX77843_CHG_DTLS_MASK;
+
+ switch (reg_data) {
+ case MAX77843_CHG_PQ_MODE:
+ case MAX77843_CHG_CC_MODE:
+ case MAX77843_CHG_CV_MODE:
+ val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case MAX77843_CHG_TO_MODE:
+ case MAX77843_CHG_DO_MODE:
+ val = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case MAX77843_CHG_HT_MODE:
+ case MAX77843_CHG_TF_MODE:
+ case MAX77843_CHG_TS_MODE:
+ val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case MAX77843_CHG_OFF_MODE:
+ val = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ default:
+ val = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return val;
+}
+
+static const char *model_name = "MAX77843";
+static const char *manufacturer = "Maxim Integrated";
+
+static int max77843_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max77843_charger *charger = container_of(psy,
+ struct max77843_charger, psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = max77843_charger_get_status(charger);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = max77843_charger_get_health(charger);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = max77843_charger_get_present(charger);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = max77843_charger_get_online(charger);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = max77843_charger_get_now_current(charger);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = max77843_charger_get_max_current(charger);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property max77843_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max77843_charger_init_current_limit(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ struct max77843_charger_info *info = charger->info;
+ unsigned int input_uamp_limit = info->input_uamp_limit;
+ int ret;
+ unsigned int reg_data, val;
+
+ ret = regmap_update_bits(regmap, MAX77843_CHG_REG_CHG_CNFG_02,
+ MAX77843_CHG_OTG_ILIMIT_MASK,
+ MAX77843_CHG_OTG_ILIMIT_900);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to write OTG current limit: %d\n", ret);
+ return ret;
+ }
+
+ if (input_uamp_limit == MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN) {
+ reg_data = 0x03;
+ } else if (input_uamp_limit == MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX) {
+ reg_data = 0x78;
+ } else {
+ if (input_uamp_limit < MAX77843_CHG_INPUT_CURRENT_LIMIT_REF)
+ val = 0x03;
+ else
+ val = 0x02;
+
+ input_uamp_limit -= MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN;
+ input_uamp_limit /= MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP;
+ reg_data = val + input_uamp_limit;
+ }
+
+ ret = regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_09, reg_data);
+ if (ret)
+ dev_err(charger->dev,
+ "Failed to write charge current limit: %d\n", ret);
+
+ return ret;
+}
+
+static int max77843_charger_init_top_off(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ struct max77843_charger_info *info = charger->info;
+ unsigned int top_off_uamp = info->top_off_uamp;
+ int ret;
+ unsigned int reg_data;
+
+ if (top_off_uamp == MAX77843_CHG_TOP_OFF_CURRENT_MIN) {
+ reg_data = 0x00;
+ } else if (top_off_uamp == MAX77843_CHG_TOP_OFF_CURRENT_MAX) {
+ reg_data = 0x07;
+ } else {
+ top_off_uamp -= MAX77843_CHG_TOP_OFF_CURRENT_MIN;
+ top_off_uamp /= MAX77843_CHG_TOP_OFF_CURRENT_STEP;
+ reg_data = top_off_uamp;
+ }
+
+ ret = regmap_update_bits(regmap, MAX77843_CHG_REG_CHG_CNFG_03,
+ MAX77843_CHG_TOP_OFF_CURRENT_MASK, reg_data);
+ if (ret)
+ dev_err(charger->dev,
+ "Failed to write top off current: %d\n", ret);
+
+ return ret;
+}
+
+static int max77843_charger_init_fast_charge(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ struct max77843_charger_info *info = charger->info;
+ unsigned int fast_charge_uamp = info->fast_charge_uamp;
+ int ret;
+ unsigned int reg_data;
+
+ if (fast_charge_uamp < info->input_uamp_limit) {
+ reg_data = 0x09;
+ } else if (fast_charge_uamp == MAX77843_CHG_FAST_CHG_CURRENT_MIN) {
+ reg_data = 0x02;
+ } else if (fast_charge_uamp == MAX77843_CHG_FAST_CHG_CURRENT_MAX) {
+ reg_data = 0x3f;
+ } else {
+ fast_charge_uamp -= MAX77843_CHG_FAST_CHG_CURRENT_MIN;
+ fast_charge_uamp /= MAX77843_CHG_FAST_CHG_CURRENT_STEP;
+ reg_data = 0x02 + fast_charge_uamp;
+ }
+
+ ret = regmap_update_bits(regmap, MAX77843_CHG_REG_CHG_CNFG_02,
+ MAX77843_CHG_FAST_CHG_CURRENT_MASK, reg_data);
+ if (ret)
+ dev_err(charger->dev,
+ "Failed to write fast charge current: %d\n", ret);
+
+ return ret;
+}
+
+static int max77843_charger_init(struct max77843_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_06,
+ MAX77843_CHG_WRITE_CAP_UNBLOCK);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to unblock write capability: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_01,
+ MAX77843_CHG_RESTART_THRESHOLD_DISABLE);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to write charger restart threshold: %d\n", ret);
+ return ret;
+ }
+
+ ret = max77843_charger_init_fast_charge(charger);
+ if (ret) {
+ dev_err(charger->dev,
+ "Failed to set fast charge mode: %d\n", ret);
+ return ret;
+ }
+
+ ret = max77843_charger_init_top_off(charger);
+ if (ret) {
+ dev_err(charger->dev, "Failed to set top off charge mode.\n");
+ return ret;
+ }
+
+ ret = max77843_charger_init_current_limit(charger);
+ if (ret)
+ dev_err(charger->dev, "Faied to set current limit.\n");
+
+ return 0;
+}
+
+static struct max77843_charger_info *max77843_charger_dt_init(
+ struct platform_device *pdev)
+{
+ struct max77843_charger_info *info;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No charger OF node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+ &info->fast_charge_uamp);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse fast charge current.\n");
+ return ERR_PTR(ret);
+ }
+
+ ret = of_property_read_u32(np, "maxim,top-off-uamp",
+ &info->top_off_uamp);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Cannot parse primary charger termination voltage.\n");
+ return ERR_PTR(ret);
+ }
+
+ ret = of_property_read_u32(np, "maxim,input-uamp-limit",
+ &info->input_uamp_limit);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse input current limit value\n");
+ return ERR_PTR(ret);
+ }
+
+ return info;
+}
+
+static int max77843_charger_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_charger *charger;
+ int ret;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+ charger->dev = &pdev->dev;
+ charger->max77843 = max77843;
+ charger->client = max77843->i2c_chg;
+ charger->regmap = max77843->regmap_chg;
+
+ charger->info = max77843_charger_dt_init(pdev);
+ if (IS_ERR_OR_NULL(charger->info))
+ return PTR_ERR(charger->info);
+
+ charger->psy.name = "max77843-charger";
+ charger->psy.type = POWER_SUPPLY_TYPE_MAINS;
+ charger->psy.get_property = max77843_charger_get_property;
+ charger->psy.properties = max77843_charger_props;
+ charger->psy.num_properties = ARRAY_SIZE(max77843_charger_props);
+
+ ret = max77843_charger_init(charger);
+ if (ret)
+ return ret;
+
+ ret = power_supply_register(&pdev->dev, &charger->psy);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to register power supply %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max77843_charger_remove(struct platform_device *pdev)
+{
+ struct max77843_charger *charger = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&charger->psy);
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_charger_id[] = {
+ { "max77843-charger", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, max77843_charger_id);
+
+static struct platform_driver max77843_charger_driver = {
+ .driver = {
+ .name = "max77843-charger",
+ },
+ .probe = max77843_charger_probe,
+ .remove = max77843_charger_remove,
+ .id_table = max77843_charger_id,
+};
+module_platform_driver(max77843_charger_driver);
+
+MODULE_DESCRIPTION("Maxim MAX77843 charger driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 4/6] power: max77843_battery: Add Max77843 fuel gauge device driver
2015-02-04 4:56 ` Jaewon Kim
` (3 preceding siblings ...)
(?)
@ 2015-02-04 4:56 ` Jaewon Kim
-1 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
From: Beomho Seo <beomho.seo@samsung.com>
This patch adds device driver of max77843 fuel gauge.
The driver support for battery fuel gauge in Maxim Max77843.
It is fuel-gauge systems for lithuum-ion batteries in handled and
portable devices.
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/power/Kconfig | 9 ++
drivers/power/Makefile | 1 +
drivers/power/max77843_battery.c | 286 ++++++++++++++++++++++++++++++++++++++
3 files changed, 296 insertions(+)
create mode 100644 drivers/power/max77843_battery.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index a054a28..cea0ea2 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -212,6 +212,15 @@ config BATTERY_MAX17042
with MAX17042. This driver also supports max17047/50 chips which are
improved version of max17042.
+config BATTERY_MAX77843
+ tristate "Maxim MAX77843 Fuel Gauge"
+ depends on MFD_MAX77843
+ help
+ This adds support for battery fuel gauge in Maxim MAX77843. It is
+ fuel-gauge for a lithium-ion batteries with a single cell and can be
+ found in portable devices. The MAX17040 is configured to operate with
+ a single lithium cell.
+
config BATTERY_Z2
tristate "Z2 battery driver"
depends on I2C && MACH_ZIPIT2
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 212c6a2..ae0d795 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX77843) += max77843_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
diff --git a/drivers/power/max77843_battery.c b/drivers/power/max77843_battery.c
new file mode 100644
index 0000000..0c59a16
--- /dev/null
+++ b/drivers/power/max77843_battery.c
@@ -0,0 +1,286 @@
+/*
+ * Fuel gauge driver for Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max77843-private.h>
+
+struct max77843_battery {
+ struct device *dev;
+ struct max77843 *max77843;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct power_supply psy;
+};
+
+static int max77843_battery_get_capacity(struct max77843_battery *battery)
+{
+ struct regmap *regmap = battery->regmap;
+ int ret, val;
+ unsigned int reg_data;
+
+ ret = regmap_read(regmap, MAX77843_FG_REG_SOCREP, ®_data);
+ if (ret) {
+ dev_err(battery->dev, "Failed to read fuelgauge register\n");
+ return ret;
+ }
+
+ val = reg_data >> 8;
+
+ return val;
+}
+
+static int max77843_battery_get_energy_prop(struct max77843_battery *battery,
+ enum power_supply_property psp)
+{
+ struct regmap *regmap = battery->regmap;
+ unsigned int reg;
+ int ret, val;
+ unsigned int reg_data;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ reg = MAX77843_FG_REG_FULLCAP;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ reg = MAX77843_FG_REG_REMCAP_REP;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_AVG:
+ reg = MAX77843_FG_REG_REMCAP_AV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, ®_data);
+ if (ret) {
+ dev_err(battery->dev, "Failed to read fuelgauge register\n");
+ return ret;
+ }
+
+ val = reg_data;
+
+ return val;
+}
+
+static int max77843_battery_get_current_prop(struct max77843_battery *battery,
+ enum power_supply_property psp)
+{
+ struct regmap *regmap = battery->regmap;
+ unsigned int reg;
+ int ret, val;
+ unsigned int reg_data;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ reg = MAX77843_FG_REG_CURRENT;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ reg = MAX77843_FG_REG_AVG_CURRENT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, ®_data);
+ if (ret) {
+ dev_err(battery->dev, "Failed to read fuelgauge register\n");
+ return ret;
+ }
+
+ val = reg_data;
+ if (val & 0x8000) {
+ /* Negative */
+ val = ~val & 0xffff;
+ val++;
+ val *= -1;
+ }
+ /* Unit of current is mA */
+ val = val * 15625 / 100000;
+
+ return val;
+}
+
+static int max77843_battery_get_voltage_prop(struct max77843_battery *battery,
+ enum power_supply_property psp)
+{
+ struct regmap *regmap = battery->regmap;
+ unsigned int reg;
+ int ret, val;
+ unsigned int reg_data;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ reg = MAX77843_FG_REG_VCELL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ reg = MAX77843_FG_REG_AVG_VCELL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ reg = MAX77843_FG_REG_OCV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, ®_data);
+ if (ret) {
+ dev_err(battery->dev, "Failed to read fuelgauge register\n");
+ return ret;
+ }
+
+ val = (reg_data >> 4) * 125;
+ val /= 100;
+
+ return val;
+}
+
+static const char *model_name = "MAX77843";
+static const char *manufacturer = "Maxim Integrated";
+
+static int max77843_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max77843_battery *battery = container_of(psy,
+ struct max77843_battery, psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ val->intval = max77843_battery_get_voltage_prop(battery, psp);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ val->intval = max77843_battery_get_current_prop(battery, psp);
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ case POWER_SUPPLY_PROP_ENERGY_AVG:
+ val->intval = max77843_battery_get_energy_prop(battery, psp);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = max77843_battery_get_capacity(battery);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property max77843_battery_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_ENERGY_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static const struct regmap_config max77843_fuel_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_NATIVE,
+ .max_register = MAX77843_FG_END,
+};
+
+static int max77843_battery_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_battery *battery;
+ int ret;
+
+ battery = devm_kzalloc(&pdev->dev, sizeof(*battery), GFP_KERNEL);
+ if (!battery)
+ return -ENOMEM;
+
+ battery->dev = &pdev->dev;
+ battery->max77843 = max77843;
+
+ battery->client = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_FG);
+ if (!battery->client) {
+ dev_err(&pdev->dev, "Failed to get dummy i2c client.\n");
+ return PTR_ERR(battery->client);
+ }
+ i2c_set_clientdata(battery->client, max77843);
+
+ battery->regmap = devm_regmap_init_i2c(battery->client,
+ &max77843_fuel_regmap_config);
+ if (IS_ERR(battery->regmap)) {
+ ret = PTR_ERR(battery->regmap);
+ goto err_i2c;
+ }
+
+ platform_set_drvdata(pdev, battery);
+
+ battery->psy.name = "max77843-fuelgauge";
+ battery->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->psy.get_property = max77843_battery_get_property;
+ battery->psy.properties = max77843_battery_props;
+ battery->psy.num_properties = ARRAY_SIZE(max77843_battery_props);
+
+ ret = power_supply_register(&pdev->dev, &battery->psy);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register power supply\n");
+ goto err_i2c;
+ }
+
+ return 0;
+
+err_i2c:
+ i2c_unregister_device(battery->client);
+
+ return ret;
+}
+
+static int max77843_battery_remove(struct platform_device *pdev)
+{
+ struct max77843_battery *battery = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&battery->psy);
+
+ i2c_unregister_device(battery->client);
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_battery_id[] = {
+ { "max77843-fuelgauge", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, max77843_battery_id);
+
+static struct platform_driver max77843_battery_driver = {
+ .driver = {
+ .name = "max77843-fuelgauge",
+ },
+ .probe = max77843_battery_probe,
+ .remove = max77843_battery_remove,
+ .id_table = max77843_battery_id,
+};
+module_platform_driver(max77843_battery_driver);
+
+MODULE_DESCRIPTION("Maxim MAX77843 fuel gauge driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 5/6] regulator: max77843: Add max77843 regulator driver
@ 2015-02-04 4:56 ` Jaewon Kim
0 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/max77843.c | 227 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/regulator/max77843.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b5..c1f9c33 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77843
+ tristate "Maxim 77843 regulator"
+ depends on MFD_MAX77843
+ help
+ This driver controls a Maxim 77843 regulator.
+ The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+ This is suitable for Exynos5433 SoC chips.
+
config REGULATOR_MC13XXX_CORE
tristate
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebf..12408d6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 0000000..779449f
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,227 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+enum max77843_regulator_type {
+ MAX77843_SAFEOUT1 = 0,
+ MAX77843_SAFEOUT2,
+ MAX77843_CHARGER,
+
+ MAX77843_NUM,
+};
+
+static const unsigned int max77843_safeout_voltage_table[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int ret;
+ unsigned int reg;
+
+ ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Fialed to read charger register\n");
+ return ret;
+ }
+
+ return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ unsigned int chg_max_uA = rdev->constraints->max_uA;
+ unsigned int val;
+ int ret;
+ unsigned int reg, sel;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to read charger register\n");
+ return ret;
+ }
+
+ sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (sel < 0x03)
+ sel = 0;
+ else
+ sel -= 2;
+
+ val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+ if (val > chg_max_uA)
+ return -EINVAL;
+
+ return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ int sel = 0;
+
+ while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+ sel++;
+
+ if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+ return -EINVAL;
+
+ sel += 2;
+
+ return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+ .is_enabled = max77843_reg_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_current_limit = max77843_reg_get_current_limit,
+ .set_current_limit = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+ [MAX77843_SAFEOUT1] = {
+ .name = "SAFEOUT1",
+ .id = MAX77843_SAFEOUT1,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+ },
+ [MAX77843_SAFEOUT2] = {
+ .name = "SAFEOUT2",
+ .id = MAX77843_SAFEOUT2,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+ },
+ [MAX77843_CHARGER] = {
+ .name = "CHARGER",
+ .id = MAX77843_CHARGER,
+ .ops = &max77843_charger_ops,
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+ .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
+ .enable_mask = MAX77843_CHG_MASK,
+ },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+ switch (reg_id) {
+ case MAX77843_SAFEOUT1:
+ case MAX77843_SAFEOUT2:
+ return max77843->regmap;
+ case MAX77843_CHARGER:
+ return max77843->regmap_chg;
+ default:
+ return max77843->regmap;
+ }
+}
+
+static int max77843_regulator_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ int i;
+
+ config.dev = max77843->dev;
+ config.driver_data = max77843;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = max77843_get_regmap(max77843,
+ max77843_supported_regulators[i].id);
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &max77843_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev,
+ "Failed to regiser regulator-%d\n", i);
+ return PTR_ERR(regulator);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_regulator_id[] = {
+ { "max77843-regulator", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver max77843_regulator_driver = {
+ .driver = {
+ .name = "max77843-regulator",
+ },
+ .probe = max77843_regulator_probe,
+ .id_table = max77843_regulator_id,
+};
+
+static int __init max77843_regulator_init(void)
+{
+ return platform_driver_register(&max77843_regulator_driver);
+}
+subsys_initcall(max77843_regulator_init);
+
+static void __exit max77843_regulator_exit(void)
+{
+ platform_driver_unregister(&max77843_regulator_driver);
+}
+module_exit(max77843_regulator_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 5/6] regulator: max77843: Add max77843 regulator driver
@ 2015-02-04 4:56 ` Jaewon Kim
0 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Jaewon Kim <jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/max77843.c | 227 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/regulator/max77843.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b5..c1f9c33 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77843
+ tristate "Maxim 77843 regulator"
+ depends on MFD_MAX77843
+ help
+ This driver controls a Maxim 77843 regulator.
+ The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+ This is suitable for Exynos5433 SoC chips.
+
config REGULATOR_MC13XXX_CORE
tristate
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebf..12408d6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 0000000..779449f
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,227 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Author: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+enum max77843_regulator_type {
+ MAX77843_SAFEOUT1 = 0,
+ MAX77843_SAFEOUT2,
+ MAX77843_CHARGER,
+
+ MAX77843_NUM,
+};
+
+static const unsigned int max77843_safeout_voltage_table[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int ret;
+ unsigned int reg;
+
+ ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Fialed to read charger register\n");
+ return ret;
+ }
+
+ return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ unsigned int chg_max_uA = rdev->constraints->max_uA;
+ unsigned int val;
+ int ret;
+ unsigned int reg, sel;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to read charger register\n");
+ return ret;
+ }
+
+ sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (sel < 0x03)
+ sel = 0;
+ else
+ sel -= 2;
+
+ val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+ if (val > chg_max_uA)
+ return -EINVAL;
+
+ return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ int sel = 0;
+
+ while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+ sel++;
+
+ if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+ return -EINVAL;
+
+ sel += 2;
+
+ return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+ .is_enabled = max77843_reg_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_current_limit = max77843_reg_get_current_limit,
+ .set_current_limit = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+ [MAX77843_SAFEOUT1] = {
+ .name = "SAFEOUT1",
+ .id = MAX77843_SAFEOUT1,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+ },
+ [MAX77843_SAFEOUT2] = {
+ .name = "SAFEOUT2",
+ .id = MAX77843_SAFEOUT2,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+ },
+ [MAX77843_CHARGER] = {
+ .name = "CHARGER",
+ .id = MAX77843_CHARGER,
+ .ops = &max77843_charger_ops,
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+ .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
+ .enable_mask = MAX77843_CHG_MASK,
+ },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+ switch (reg_id) {
+ case MAX77843_SAFEOUT1:
+ case MAX77843_SAFEOUT2:
+ return max77843->regmap;
+ case MAX77843_CHARGER:
+ return max77843->regmap_chg;
+ default:
+ return max77843->regmap;
+ }
+}
+
+static int max77843_regulator_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ int i;
+
+ config.dev = max77843->dev;
+ config.driver_data = max77843;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = max77843_get_regmap(max77843,
+ max77843_supported_regulators[i].id);
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &max77843_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev,
+ "Failed to regiser regulator-%d\n", i);
+ return PTR_ERR(regulator);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_regulator_id[] = {
+ { "max77843-regulator", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver max77843_regulator_driver = {
+ .driver = {
+ .name = "max77843-regulator",
+ },
+ .probe = max77843_regulator_probe,
+ .id_table = max77843_regulator_id,
+};
+
+static int __init max77843_regulator_init(void)
+{
+ return platform_driver_register(&max77843_regulator_driver);
+}
+subsys_initcall(max77843_regulator_init);
+
+static void __exit max77843_regulator_exit(void)
+{
+ platform_driver_unregister(&max77843_regulator_driver);
+}
+module_exit(max77843_regulator_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
+MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 5/6] regulator: max77843: Add max77843 regulator driver
2015-02-04 4:56 ` Jaewon Kim
(?)
@ 2015-02-04 20:26 ` Mark Brown
2015-02-05 6:27 ` Jaewon Kim
-1 siblings, 1 reply; 20+ messages in thread
From: Mark Brown @ 2015-02-04 20:26 UTC (permalink / raw)
To: Jaewon Kim
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Lee Jones, Chanwoo Choi, Sebastian Reichel, Beomho Seo
[-- Attachment #1: Type: text/plain, Size: 244 bytes --]
On Wed, Feb 04, 2015 at 01:56:10PM +0900, Jaewon Kim wrote:
> This patch adds new regulator driver to support max77843
> MFD(Multi Function Device) chip`s regulators.
> The Max77843 has two voltage regulators for USB safeout.
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 5/6] regulator: max77843: Add max77843 regulator driver
2015-02-04 20:26 ` Mark Brown
@ 2015-02-05 6:27 ` Jaewon Kim
0 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-05 6:27 UTC (permalink / raw)
To: Mark Brown
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Lee Jones, Chanwoo Choi, Sebastian Reichel, Beomho Seo
Hi Mark,
2015년 02월 05일 05:26에 Mark Brown 이(가) 쓴 글:
> On Wed, Feb 04, 2015 at 01:56:10PM +0900, Jaewon Kim wrote:
>> This patch adds new regulator driver to support max77843
>> MFD(Multi Function Device) chip`s regulators.
>> The Max77843 has two voltage regulators for USB safeout.
> Applied, thanks.
I made a mistake in this patch.
volt_table value was not fixed correctly.
I will send fixed driver soon. plz change it.
Thanks,
Jaewon Kim
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4] regulator: max77843: Add max77843 regulator driver
2015-02-04 4:56 ` Jaewon Kim
(?)
(?)
@ 2015-02-05 6:35 ` Jaewon Kim
2015-02-05 17:36 ` Mark Brown
-1 siblings, 1 reply; 20+ messages in thread
From: Jaewon Kim @ 2015-02-05 6:35 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/max77843.c | 227 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/regulator/max77843.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b5..c1f9c33 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77843
+ tristate "Maxim 77843 regulator"
+ depends on MFD_MAX77843
+ help
+ This driver controls a Maxim 77843 regulator.
+ The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+ This is suitable for Exynos5433 SoC chips.
+
config REGULATOR_MC13XXX_CORE
tristate
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebf..12408d6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 0000000..c132ef5
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,227 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+enum max77843_regulator_type {
+ MAX77843_SAFEOUT1 = 0,
+ MAX77843_SAFEOUT2,
+ MAX77843_CHARGER,
+
+ MAX77843_NUM,
+};
+
+static const unsigned int max77843_safeout_voltage_table[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int ret;
+ unsigned int reg;
+
+ ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Fialed to read charger register\n");
+ return ret;
+ }
+
+ return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ unsigned int chg_max_uA = rdev->constraints->max_uA;
+ unsigned int val;
+ int ret;
+ unsigned int reg, sel;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to read charger register\n");
+ return ret;
+ }
+
+ sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (sel < 0x03)
+ sel = 0;
+ else
+ sel -= 2;
+
+ val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+ if (val > chg_max_uA)
+ return -EINVAL;
+
+ return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ int sel = 0;
+
+ while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+ sel++;
+
+ if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+ return -EINVAL;
+
+ sel += 2;
+
+ return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+ .is_enabled = max77843_reg_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_current_limit = max77843_reg_get_current_limit,
+ .set_current_limit = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+ [MAX77843_SAFEOUT1] = {
+ .name = "SAFEOUT1",
+ .id = MAX77843_SAFEOUT1,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_safeout_voltage_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+ },
+ [MAX77843_SAFEOUT2] = {
+ .name = "SAFEOUT2",
+ .id = MAX77843_SAFEOUT2,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_safeout_voltage_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+ },
+ [MAX77843_CHARGER] = {
+ .name = "CHARGER",
+ .id = MAX77843_CHARGER,
+ .ops = &max77843_charger_ops,
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+ .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
+ .enable_mask = MAX77843_CHG_MASK,
+ },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+ switch (reg_id) {
+ case MAX77843_SAFEOUT1:
+ case MAX77843_SAFEOUT2:
+ return max77843->regmap;
+ case MAX77843_CHARGER:
+ return max77843->regmap_chg;
+ default:
+ return max77843->regmap;
+ }
+}
+
+static int max77843_regulator_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ int i;
+
+ config.dev = max77843->dev;
+ config.driver_data = max77843;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = max77843_get_regmap(max77843,
+ max77843_supported_regulators[i].id);
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &max77843_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev,
+ "Failed to regiser regulator-%d\n", i);
+ return PTR_ERR(regulator);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_regulator_id[] = {
+ { "max77843-regulator", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver max77843_regulator_driver = {
+ .driver = {
+ .name = "max77843-regulator",
+ },
+ .probe = max77843_regulator_probe,
+ .id_table = max77843_regulator_id,
+};
+
+static int __init max77843_regulator_init(void)
+{
+ return platform_driver_register(&max77843_regulator_driver);
+}
+subsys_initcall(max77843_regulator_init);
+
+static void __exit max77843_regulator_exit(void)
+{
+ platform_driver_unregister(&max77843_regulator_driver);
+}
+module_exit(max77843_regulator_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4] regulator: max77843: Add max77843 regulator driver
2015-02-05 6:35 ` [PATCH v4] " Jaewon Kim
@ 2015-02-05 17:36 ` Mark Brown
0 siblings, 0 replies; 20+ messages in thread
From: Mark Brown @ 2015-02-05 17:36 UTC (permalink / raw)
To: Jaewon Kim
Cc: linux-kernel, devicetree, linux-pm, Inki Dae, SangBae Lee,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Lee Jones, Chanwoo Choi, Sebastian Reichel, Beomho Seo
[-- Attachment #1: Type: text/plain, Size: 445 bytes --]
On Thu, Feb 05, 2015 at 03:35:58PM +0900, Jaewon Kim wrote:
> This patch adds new regulator driver to support max77843
> MFD(Multi Function Device) chip`s regulators.
> The Max77843 has two voltage regulators for USB safeout.
I've already applied the previous version so any further updates needed
should be sent as new patches that apply on top of what's already been
applied. I've applied this but please in future send incremental
patches.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 6/6] Documentation: Add device tree bindings document for max77843
2015-02-04 4:56 ` Jaewon Kim
` (5 preceding siblings ...)
(?)
@ 2015-02-04 4:56 ` Jaewon Kim
-1 siblings, 0 replies; 20+ messages in thread
From: Jaewon Kim @ 2015-02-04 4:56 UTC (permalink / raw)
To: linux-kernel, devicetree, linux-pm
Cc: Inki Dae, SangBae Lee, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Lee Jones, Chanwoo Choi,
Sebastian Reichel, Mark Brown, Beomho Seo, Jaewon Kim
Add document describing device tree bindings for max77843 MFD.
Drivers: MFD core, regulator, extcon, charger and fuelgauge.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
Documentation/devicetree/bindings/mfd/max77843.txt | 90 ++++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max77843.txt
diff --git a/Documentation/devicetree/bindings/mfd/max77843.txt b/Documentation/devicetree/bindings/mfd/max77843.txt
new file mode 100644
index 0000000..4341ab9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77843.txt
@@ -0,0 +1,90 @@
+Maxim MAX77843 multi-function device
+
+MAX77843 is a Multi-Function Device with the following submodules:
+- PMIC : 2 SAFEOUT LDOs for USB device
+- CHARGER : Li+ battery charger with Fuel Gauge
+- MUIC : Micro USB Interface Controller
+
+It is interfaced to host controller using I2C.
+
+Required properties:
+- compatible : Must be "maxim,max77843".
+- reg : I2C slave address of PMIC block.
+- interrupts : I2C line for main SoCs.
+- interrupt-parent : The parent of interrupt controller.
+
+Optional properties:
+- regulators : The regulators of max77843 have to be instantiated under subnode
+ named "regulators" using the following format.
+
+ [*]refer : Documentation/devicetree/bindings/regulator/regulator.txt
+
+ regulators {
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ }
+
+ List of valid regulator names:
+ - SAFEOUT1, SAFEOUT2, CHARGER.
+
+- max77843-muic : This properties used by extcon consumers.
+ Required properties:
+ - compatible : Must be "maxim,max77842-muic".
+
+- max77843-charger : There battery charger of MAX77843 have to be instantiated
+ under sub-node named "max77843-charger" using the following format.
+ Required properties:
+ - compatible : Must be "maxim,max77842-charger".
+ - maxim,fast-charge-uamp : Fast charge current levels are
+ 100 mA to 3150 mA programmed by I2C per 100 mA.
+ - maxim,top-off-uamp : Top off current threshold levels are
+ 125 mA to 650 mA programmed by I2C per 75 mA.
+ - maxim,input-uamp-limit : Input current limit levels are
+ 100 mA to 3533 mA programmed by I2C per 33 mA.
+- max77843-fuelgauge : There fuelgauge of MAX77843 have to be instantiated
+ under sub-node named "max77843-fuelgauge" using the following format.
+ Required properties:
+ - compatible : Must be "maxim,max77842-fuelgauge".
+
+Example:
+ max77843@66 {
+ compatible = "samsung,max77843";
+ reg = <0x66>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 2>;
+
+ regulators {
+ SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+ SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ max77843-charger {
+ compatible = "maxim,max77843-charger";
+ maxim,fast-charge-uamp = <450000>;
+ maxim,top-off-uamp = <125000>;
+ maxim,input-uamp-limit = <500000>;
+ };
+
+ max77843-fuelgauge {
+ compatible = "maxim,max77843-fuelgauge";
+ };
+
+ };
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread