* [PATCH V6 0/3] Add support for eXtended Physical Addressing.
@ 2015-02-26 19:01 Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions Steven J. Hill
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Steven J. Hill @ 2015-02-26 19:01 UTC (permalink / raw)
To: linux-mips; +Cc: ralf, Steven J. Hill
From: "Steven J. Hill" <Steven.Hill@imgtec.com>
This set of patches adds XPA support for R5 and later cores. This
has been tested on P5600 platforms only. As noted in the main
commit for XPA support, EVA and XPA cannot currently be used at
the same time.
Changes from V5:
- Rebased against upstream 4.0-rc1 tag.
Changes from V4:
- Rebased against 'mips-for-linux-next-test' branch.
- Fix all build breakages from PTE fixed bit positions patch.
- Make some code be used for R2 or newer cores.
Changes from V3:
- Rebased against upstream 3.19-rc4 tag.
Changes from V2:
- Moved HIGHMEM and cache flush fixes to separate patchset.
- Rebased against 3.19-rc5 tag.
Changes from V1:
- Remove fixrange_init() revert patch.
- Remove CCA patch.
- Remove HEAP/BSS execute bit removal patch.
- Updated __writex_32bit_c0_register() to use %1 instead of
the macro variable name.
Steven J. Hill (3):
MIPS: Rearrange PTE bits into fixed positions.
MIPS: Add support for XPA.
MIPS: XPA: Add new configuration file.
arch/mips/Kconfig | 35 +++
arch/mips/configs/maltaup_xpa_defconfig | 439 +++++++++++++++++++++++++++++++
arch/mips/include/asm/cpu-features.h | 3 +
arch/mips/include/asm/cpu.h | 1 +
arch/mips/include/asm/pgtable-32.h | 15 +-
arch/mips/include/asm/pgtable-bits.h | 92 ++++---
arch/mips/include/asm/pgtable.h | 36 +--
arch/mips/kernel/cpu-probe.c | 4 +
arch/mips/kernel/proc.c | 1 +
arch/mips/mm/init.c | 7 +-
arch/mips/mm/tlb-r4k.c | 12 +
arch/mips/mm/tlbex.c | 90 ++++++-
12 files changed, 663 insertions(+), 72 deletions(-)
create mode 100644 arch/mips/configs/maltaup_xpa_defconfig
--
1.7.10.4
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions.
2015-02-26 19:01 [PATCH V6 0/3] Add support for eXtended Physical Addressing Steven J. Hill
@ 2015-02-26 19:01 ` Steven J. Hill
2015-02-26 20:04 ` David Daney
2015-02-26 19:01 ` [PATCH V6 2/3] MIPS: Add support for XPA Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 3/3] MIPS: XPA: Add new configuration file Steven J. Hill
2 siblings, 1 reply; 5+ messages in thread
From: Steven J. Hill @ 2015-02-26 19:01 UTC (permalink / raw)
To: linux-mips; +Cc: ralf, Steven J. Hill
From: "Steven J. Hill" <Steven.Hill@imgtec.com>
This patch rearranges the PTE bits into fixed positions for R2
and later cores. In the past, the TLB handling code did runtime
checking of RI/XI and adjusted the shifts and rotates in order
to fit the largest PFN value into the PTE. The checking now
occurs when building the TLB handler, thus eliminating those
checks. These new arrangements also define the largest possible
PFN value that can fit in the PTE. HUGE page support is only
available on 64-bit platforms.
The new layouts of the PTE bits are the following:
64-bit, R1 or earlier: CCC D V G [S H] M A W R P
32-bit, R1 or earler: CCC D V G M A W R P
64-bit, R2 or later: CCC D V G RI XI [S H] M A W R P
32-bit, R2 or later: CCC D V G RI XI M A W R P
In the case of cores that support the RI/XI bits, the value of
the R bit is ignored.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
---
arch/mips/include/asm/pgtable-bits.h | 79 ++++++++++++++++++++++------------
1 file changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 91747c2..66b5184 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -95,50 +95,73 @@
#else
/*
- * When using the RI/XI bit support, we have 13 bits of flags below
- * the physical address. The RI/XI bits are placed such that a SRL 5
- * can strip off the software bits, then a ROTR 2 can move the RI/XI
- * into bits [63:62]. This also limits physical address to 56 bits,
- * which is more than we need right now.
+ * Below are the "Normal" R4K cases
*/
-
+#if defined(CONFIG_64BIT) || !defined(CONFIG_CPU_MIPSR2)
/*
* The following bits are implemented in software
*/
#define _PAGE_PRESENT_SHIFT 0
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
-#define _PAGE_READ_SHIFT (cpu_has_rixi ? _PAGE_PRESENT_SHIFT : _PAGE_PRESENT_SHIFT + 1)
-#define _PAGE_READ ({BUG_ON(cpu_has_rixi); 1 << _PAGE_READ_SHIFT; })
+#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1)
+#define _PAGE_READ (1 << _PAGE_READ_SHIFT)
#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1)
#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT)
#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1)
#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1)
#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
+#else
+#define _PAGE_PRESENT_SHIFT (0)
+#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
+#define _PAGE_WRITE_SHIFT (_PAGE_PRESENT_SHIFT + 1)
+#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT)
+#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1)
+#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
+#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1)
+#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
+#endif
-#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+#if defined(CONFIG_64BIT) && defined(CONFIG_MIPS_HUGE_TLB_SUPPORT)
/* huge tlb page */
#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT + 1)
#define _PAGE_HUGE (1 << _PAGE_HUGE_SHIFT)
#define _PAGE_SPLITTING_SHIFT (_PAGE_HUGE_SHIFT + 1)
#define _PAGE_SPLITTING (1 << _PAGE_SPLITTING_SHIFT)
-#else
-#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT)
-#define _PAGE_HUGE ({BUG(); 1; }) /* Dummy value */
-#define _PAGE_SPLITTING_SHIFT (_PAGE_HUGE_SHIFT)
-#define _PAGE_SPLITTING ({BUG(); 1; }) /* Dummy value */
-#endif
+#ifdef CONFIG_CPU_MIPSR2
/* Page cannot be executed */
-#define _PAGE_NO_EXEC_SHIFT (cpu_has_rixi ? _PAGE_SPLITTING_SHIFT + 1 : _PAGE_SPLITTING_SHIFT)
-#define _PAGE_NO_EXEC ({BUG_ON(!cpu_has_rixi); 1 << _PAGE_NO_EXEC_SHIFT; })
+#define _PAGE_NO_EXEC_SHIFT (_PAGE_SPLITTING_SHIFT + 1)
+
+#else /* !CONFIG_CPU_MIPSR2 */
+#define _PAGE_GLOBAL_SHIFT (_PAGE_SPLITTING_SHIFT + 1)
+#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
+/* not supported */
+#define _PAGE_NO_EXEC (0)
+#define _PAGE_NO_READ (0)
+#endif /* CONFIG_CPU_MIPSR2 */
+
+#endif /* CONFIG_64BIT && CONFIG_MIPS_HUGE_TLB_SUPPORT */
+
+#ifdef CONFIG_CPU_MIPSR2
+/* if not defined, we are 32BIT */
+#ifndef _PAGE_NO_EXEC_SHIFT
+#define _PAGE_NO_EXEC_SHIFT (_PAGE_MODIFIED_SHIFT + 1)
+#endif
+#define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
/* Page cannot be read */
-#define _PAGE_NO_READ_SHIFT (cpu_has_rixi ? _PAGE_NO_EXEC_SHIFT + 1 : _PAGE_NO_EXEC_SHIFT)
-#define _PAGE_NO_READ ({BUG_ON(!cpu_has_rixi); 1 << _PAGE_NO_READ_SHIFT; })
+#define _PAGE_NO_READ_SHIFT (_PAGE_NO_EXEC_SHIFT + 1)
+#define _PAGE_NO_READ (1 << _PAGE_NO_READ_SHIFT)
+
+/* unused if cpu_has_rixi */
+#define _PAGE_READ_SHIFT _PAGE_NO_READ_SHIFT
+#define _PAGE_READ (1 << _PAGE_READ_SHIFT)
#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1)
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
+#endif
+
#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1)
#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1)
@@ -148,6 +171,14 @@
#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
+/*
+ * Below are the different layouts of the PTE bits:
+ *
+ * 64-bit, R1 or earlier: CCC D V G [S H] M A W R P
+ * 32-bit, R1 or earler: CCC D V G M A W R P
+ * 64-bit, R2 or later: CCC D V G RI XI [S H] M A W R P
+ * 32-bit, R2 or later: CCC D V G RI XI M A W R P
+ */
#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT && defined(CONFIG_CPU_MIPS32) */
#define _PAGE_SILENT_READ _PAGE_VALID
@@ -155,14 +186,6 @@
#define _PFN_MASK (~((1 << (_PFN_SHIFT)) - 1))
-#ifndef _PAGE_NO_READ
-#define _PAGE_NO_READ ({BUG(); 0; })
-#define _PAGE_NO_READ_SHIFT ({BUG(); 0; })
-#endif
-#ifndef _PAGE_NO_EXEC
-#define _PAGE_NO_EXEC ({BUG(); 0; })
-#endif
-
#ifndef __ASSEMBLY__
/*
@@ -245,7 +268,7 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
#endif
-#define __READABLE (_PAGE_SILENT_READ | _PAGE_ACCESSED | (cpu_has_rixi ? 0 : _PAGE_READ))
+#define __READABLE (_PAGE_SILENT_READ | _PAGE_READ | _PAGE_ACCESSED)
#define __WRITEABLE (_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED)
#define _PAGE_CHG_MASK (_PAGE_ACCESSED | _PAGE_MODIFIED | \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH V6 2/3] MIPS: Add support for XPA.
2015-02-26 19:01 [PATCH V6 0/3] Add support for eXtended Physical Addressing Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions Steven J. Hill
@ 2015-02-26 19:01 ` Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 3/3] MIPS: XPA: Add new configuration file Steven J. Hill
2 siblings, 0 replies; 5+ messages in thread
From: Steven J. Hill @ 2015-02-26 19:01 UTC (permalink / raw)
To: linux-mips; +Cc: ralf, Steven J. Hill
From: "Steven J. Hill" <Steven.Hill@imgtec.com>
Add support for extended physical addressing (XPA) so that
32-bit platforms can access equal to or greater than 40 bits
of physical addresses.
NOTE:
1) XPA and EVA are not the same and cannot be used
simultaneously.
2) If you configure your kernel for XPA, the PTEs
and all address sizes become 64-bit.
3) Your platform MUST have working HIGHMEM support.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
---
arch/mips/Kconfig | 35 +++++++++++++
arch/mips/include/asm/cpu-features.h | 3 ++
arch/mips/include/asm/cpu.h | 1 +
arch/mips/include/asm/pgtable-32.h | 15 +++---
arch/mips/include/asm/pgtable-bits.h | 13 ++++-
arch/mips/include/asm/pgtable.h | 36 ++++++--------
arch/mips/kernel/cpu-probe.c | 4 ++
arch/mips/kernel/proc.c | 1 +
arch/mips/mm/init.c | 7 ++-
arch/mips/mm/tlb-r4k.c | 12 +++++
arch/mips/mm/tlbex.c | 90 +++++++++++++++++++++++++++++-----
11 files changed, 173 insertions(+), 44 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c7a1690..69a3b0f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -377,6 +377,7 @@ config MIPS_MALTA
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS32_R3_5
+ select SYS_HAS_CPU_MIPS32_R5
select SYS_HAS_CPU_MIPS32_R6
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_CPU_MIPS64_R2
@@ -386,6 +387,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS_CMP
@@ -1596,6 +1598,33 @@ config CPU_MIPS32_3_5_EVA
One of its primary benefits is an increase in the maximum size
of lowmem (up to 3GB). If unsure, say 'N' here.
+config CPU_MIPS32_R5_FEATURES
+ bool "MIPS32 Release 5 Features"
+ depends on SYS_HAS_CPU_MIPS32_R5
+ depends on CPU_MIPS32_R2
+ help
+ Choose this option to build a kernel for release 2 or later of the
+ MIPS32 architecture including features from release 5 such as
+ support for Extended Physical Addressing (XPA).
+
+config CPU_MIPS32_R5_XPA
+ bool "Extended Physical Addressing (XPA)"
+ depends on CPU_MIPS32_R5_FEATURES
+ depends on !EVA
+ depends on !PAGE_SIZE_4KB
+ depends on SYS_SUPPORTS_HIGHMEM
+ select XPA
+ select HIGHMEM
+ select ARCH_PHYS_ADDR_T_64BIT
+ default n
+ help
+ Choose this option if you want to enable the Extended Physical
+ Addressing (XPA) on your MIPS32 core (such as P5600 series). The
+ benefit is to increase physical addressing equal to or greater
+ than 40 bits. Note that this has the side effect of turning on
+ 64-bit addressing which in turn makes the PTEs 64-bit in size.
+ If unsure, say 'N' here.
+
if CPU_LOONGSON2F
config CPU_NOP_WORKAROUNDS
bool
@@ -1699,6 +1728,9 @@ config SYS_HAS_CPU_MIPS32_R2
config SYS_HAS_CPU_MIPS32_R3_5
bool
+config SYS_HAS_CPU_MIPS32_R5
+ bool
+
config SYS_HAS_CPU_MIPS32_R6
bool
@@ -1836,6 +1868,9 @@ config CPU_MIPSR6
config EVA
bool
+config XPA
+ bool
+
config SYS_SUPPORTS_32BIT_KERNEL
bool
config SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 0d8208d..bf4b915 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -139,6 +139,9 @@
# endif
#endif
+#ifndef cpu_has_xpa
+#define cpu_has_xpa (cpu_data[0].options & MIPS_CPU_XPA)
+#endif
#ifndef cpu_has_vtag_icache
#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 1568723..e492c74 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -377,6 +377,7 @@ enum cpu_type_enum {
#define MIPS_CPU_MAAR 0x400000000ull /* MAAR(I) registers are present */
#define MIPS_CPU_FRE 0x800000000ull /* FRE & UFE bits implemented */
#define MIPS_CPU_RW_LLB 0x1000000000ull /* LLADDR/LLB writes are allowed */
+#define MIPS_CPU_XPA 0x2000000000ull /* CPU supports Extended Physical Addressing */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index a6be006..7d56686 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -105,13 +105,16 @@ static inline void pmd_clear(pmd_t *pmdp)
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
+#define pte_pfn(x) (((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
static inline pte_t
pfn_pte(unsigned long pfn, pgprot_t prot)
{
pte_t pte;
- pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
- pte.pte_low = pgprot_val(prot);
+
+ pte.pte_low = (pfn >> _PAGE_PRESENT_SHIFT) |
+ (pgprot_val(prot) & ~_PFNX_MASK);
+ pte.pte_high = (pfn << _PFN_SHIFT) |
+ (pgprot_val(prot) & ~_PFN_MASK);
return pte;
}
@@ -166,9 +169,9 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
/* Swap entries must have VALID and GLOBAL bits cleared. */
-#define __swp_type(x) (((x).val >> 2) & 0x1f)
-#define __swp_offset(x) ((x).val >> 7)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
+#define __swp_type(x) (((x).val >> 4) & 0x1f)
+#define __swp_offset(x) ((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 9) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 66b5184..2578d7f 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -37,7 +37,11 @@
/*
* The following bits are implemented by the TLB hardware
*/
-#define _PAGE_GLOBAL_SHIFT 0
+#define _PAGE_NO_EXEC_SHIFT (0)
+#define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
+#define _PAGE_NO_READ_SHIFT (_PAGE_NO_EXEC_SHIFT + 1)
+#define _PAGE_NO_READ (1 << _PAGE_NO_READ_SHIFT)
+#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1)
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1)
#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
@@ -49,7 +53,7 @@
/*
* The following bits are implemented in software
*/
-#define _PAGE_PRESENT_SHIFT (_CACHE_SHIFT + 3)
+#define _PAGE_PRESENT_SHIFT (24)
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1)
#define _PAGE_READ (1 << _PAGE_READ_SHIFT)
@@ -62,6 +66,11 @@
#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
+/*
+ * Bits for extended EntryLo0/EntryLo1 registers
+ */
+#define _PFNX_MASK 0xffffff
+
#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
/*
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index bef782c..81a301f 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -133,7 +133,7 @@ extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
-#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_none(pte) (!(((pte).pte_high) & ~_PAGE_GLOBAL))
#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
static inline void set_pte(pte_t *ptep, pte_t pte)
@@ -142,16 +142,14 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
smp_wmb();
ptep->pte_low = pte.pte_low;
- if (pte.pte_low & _PAGE_GLOBAL) {
+ if (pte.pte_high & _PAGE_GLOBAL) {
pte_t *buddy = ptep_buddy(ptep);
/*
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
- if (pte_none(*buddy)) {
- buddy->pte_low |= _PAGE_GLOBAL;
+ if (pte_none(*buddy))
buddy->pte_high |= _PAGE_GLOBAL;
- }
}
}
@@ -161,8 +159,8 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
htw_stop();
/* Preserve global status for the pair */
- if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
- null.pte_low = null.pte_high = _PAGE_GLOBAL;
+ if (ptep_buddy(ptep)->pte_high & _PAGE_GLOBAL)
+ null.pte_high = _PAGE_GLOBAL;
set_pte_at(mm, addr, ptep, null);
htw_start();
@@ -242,21 +240,21 @@ static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
static inline pte_t pte_wrprotect(pte_t pte)
{
- pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+ pte.pte_low &= ~_PAGE_WRITE;
pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_mkclean(pte_t pte)
{
- pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+ pte.pte_low &= ~_PAGE_MODIFIED;
pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
- pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+ pte.pte_low &= ~_PAGE_ACCESSED;
pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
@@ -264,30 +262,24 @@ static inline pte_t pte_mkold(pte_t pte)
static inline pte_t pte_mkwrite(pte_t pte)
{
pte.pte_low |= _PAGE_WRITE;
- if (pte.pte_low & _PAGE_MODIFIED) {
- pte.pte_low |= _PAGE_SILENT_WRITE;
+ if (pte.pte_low & _PAGE_MODIFIED)
pte.pte_high |= _PAGE_SILENT_WRITE;
- }
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
pte.pte_low |= _PAGE_MODIFIED;
- if (pte.pte_low & _PAGE_WRITE) {
- pte.pte_low |= _PAGE_SILENT_WRITE;
+ if (pte.pte_low & _PAGE_WRITE)
pte.pte_high |= _PAGE_SILENT_WRITE;
- }
return pte;
}
static inline pte_t pte_mkyoung(pte_t pte)
{
pte.pte_low |= _PAGE_ACCESSED;
- if (pte.pte_low & _PAGE_READ) {
- pte.pte_low |= _PAGE_SILENT_READ;
+ if (pte.pte_low & _PAGE_READ)
pte.pte_high |= _PAGE_SILENT_READ;
- }
return pte;
}
#else
@@ -391,10 +383,10 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- pte.pte_low &= _PAGE_CHG_MASK;
+ pte.pte_low &= (_PAGE_MODIFIED | _PAGE_ACCESSED | _PFNX_MASK);
pte.pte_high &= (_PFN_MASK | _CACHE_MASK);
- pte.pte_low |= pgprot_val(newprot);
- pte.pte_high |= pgprot_val(newprot) & ~(_PFN_MASK | _CACHE_MASK);
+ pte.pte_low |= pgprot_val(newprot) & ~_PFNX_MASK;
+ pte.pte_high |= pgprot_val(newprot) & ~_PFN_MASK;
return pte;
}
#else
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 48dfb9d..ac96817 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -516,6 +516,10 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
c->options |= MIPS_CPU_MAAR;
if (config5 & MIPS_CONF5_LLB)
c->options |= MIPS_CPU_RW_LLB;
+#ifdef CONFIG_XPA
+ if (config5 & MIPS_CONF5_MVH)
+ c->options |= MIPS_CPU_XPA;
+#endif
return config5 & MIPS_CONF_M;
}
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 130af7d..298b2b7 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -120,6 +120,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if (cpu_has_msa) seq_printf(m, "%s", " msa");
if (cpu_has_eva) seq_printf(m, "%s", " eva");
if (cpu_has_htw) seq_printf(m, "%s", " htw");
+ if (cpu_has_xpa) seq_printf(m, "%s", " xpa");
seq_printf(m, "\n");
if (cpu_has_mmips) {
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 448cde3..faa5c98 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -96,7 +96,7 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
vaddr = __fix_to_virt(FIX_CMAP_END - idx);
pte = mk_pte(page, prot);
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
- entrylo = pte.pte_high;
+ entrylo = pte_to_entrylo(pte.pte_high);
#else
entrylo = pte_to_entrylo(pte_val(pte));
#endif
@@ -106,6 +106,11 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
write_c0_entryhi(vaddr & (PAGE_MASK << 1));
write_c0_entrylo0(entrylo);
write_c0_entrylo1(entrylo);
+#ifdef CONFIG_XPA
+ entrylo = (pte.pte_low & _PFNX_MASK);
+ writex_c0_entrylo0(entrylo);
+ writex_c0_entrylo1(entrylo);
+#endif
tlbidx = read_c0_wired();
write_c0_wired(tlbidx + 1);
write_c0_index(tlbidx);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index b2afa49..c2500f4 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -333,9 +333,17 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
ptep = pte_offset_map(pmdp, address);
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+#ifdef CONFIG_XPA
+ write_c0_entrylo0(pte_to_entrylo(ptep->pte_high));
+ writex_c0_entrylo0(ptep->pte_low & _PFNX_MASK);
+ ptep++;
+ write_c0_entrylo1(pte_to_entrylo(ptep->pte_high));
+ writex_c0_entrylo1(ptep->pte_low & _PFNX_MASK);
+#else
write_c0_entrylo0(ptep->pte_high);
ptep++;
write_c0_entrylo1(ptep->pte_high);
+#endif
#else
write_c0_entrylo0(pte_to_entrylo(pte_val(*ptep++)));
write_c0_entrylo1(pte_to_entrylo(pte_val(*ptep)));
@@ -355,6 +363,9 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)
{
+#ifdef CONFIG_XPA
+ panic("Broken for XPA kernels");
+#else
unsigned long flags;
unsigned long wired;
unsigned long old_pagemask;
@@ -383,6 +394,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
write_c0_pagemask(old_pagemask);
local_flush_tlb_all();
local_irq_restore(flags);
+#endif
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index d75ff73..e6e3ab4 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -35,6 +35,17 @@
#include <asm/uasm.h>
#include <asm/setup.h>
+static int __cpuinitdata mips_xpa_disabled;
+
+static int __init xpa_disable(char *s)
+{
+ mips_xpa_disabled = 1;
+
+ return 1;
+}
+
+__setup("noxpa", xpa_disable);
+
/*
* TLB load/store/modify handlers.
*
@@ -1027,12 +1038,27 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
} else {
int pte_off_even = sizeof(pte_t) / 2;
int pte_off_odd = pte_off_even + sizeof(pte_t);
+#ifdef CONFIG_XPA
+ const int scratch = 1; /* Our extra working register */
- /* The pte entries are pre-shifted */
- uasm_i_lw(p, tmp, pte_off_even, ptep); /* get even pte */
- UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- uasm_i_lw(p, ptep, pte_off_odd, ptep); /* get odd pte */
- UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
+ uasm_i_addu(p, scratch, 0, ptep);
+#endif
+ uasm_i_lw(p, tmp, pte_off_even, ptep); /* even pte */
+ uasm_i_lw(p, ptep, pte_off_odd, ptep); /* odd pte */
+ UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
+ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0);
+ UASM_i_MTC0(p, ptep, C0_ENTRYLO1);
+#ifdef CONFIG_XPA
+ uasm_i_lw(p, tmp, 0, scratch);
+ uasm_i_lw(p, ptep, sizeof(pte_t), scratch);
+ uasm_i_lui(p, scratch, 0xff);
+ uasm_i_ori(p, scratch, scratch, 0xffff);
+ uasm_i_and(p, tmp, scratch, tmp);
+ uasm_i_and(p, ptep, scratch, ptep);
+ uasm_i_mthc0(p, tmp, C0_ENTRYLO0);
+ uasm_i_mthc0(p, ptep, C0_ENTRYLO1);
+#endif
}
#else
UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
@@ -1533,8 +1559,14 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
{
#ifdef CONFIG_PHYS_ADDR_T_64BIT
unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
-#endif
+ if (!cpu_has_64bits) {
+ const int scratch = 1; /* Our extra working register */
+
+ uasm_i_lui(p, scratch, (mode >> 16));
+ uasm_i_or(p, pte, pte, scratch);
+ } else
+#endif
uasm_i_ori(p, pte, pte, mode);
#ifdef CONFIG_SMP
# ifdef CONFIG_PHYS_ADDR_T_64BIT
@@ -1598,15 +1630,17 @@ build_pte_present(u32 **p, struct uasm_reloc **r,
uasm_il_bbit0(p, r, pte, ilog2(_PAGE_PRESENT), lid);
uasm_i_nop(p);
} else {
- uasm_i_andi(p, t, pte, _PAGE_PRESENT);
+ uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
+ uasm_i_andi(p, t, t, 1);
uasm_il_beqz(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
iPTE_LW(p, pte, ptr);
}
} else {
- uasm_i_andi(p, t, pte, _PAGE_PRESENT | _PAGE_READ);
- uasm_i_xori(p, t, t, _PAGE_PRESENT | _PAGE_READ);
+ uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
+ uasm_i_andi(p, t, t, 3);
+ uasm_i_xori(p, t, t, 3);
uasm_il_bnez(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
@@ -1635,8 +1669,9 @@ build_pte_writable(u32 **p, struct uasm_reloc **r,
{
int t = scratch >= 0 ? scratch : pte;
- uasm_i_andi(p, t, pte, _PAGE_PRESENT | _PAGE_WRITE);
- uasm_i_xori(p, t, t, _PAGE_PRESENT | _PAGE_WRITE);
+ uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
+ uasm_i_andi(p, t, t, 5);
+ uasm_i_xori(p, t, t, 5);
uasm_il_bnez(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
@@ -1672,7 +1707,8 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r,
uasm_i_nop(p);
} else {
int t = scratch >= 0 ? scratch : pte;
- uasm_i_andi(p, t, pte, _PAGE_WRITE);
+ uasm_i_srl(p, t, pte, _PAGE_WRITE_SHIFT);
+ uasm_i_andi(p, t, t, 1);
uasm_il_beqz(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
@@ -2285,6 +2321,11 @@ static void config_htw_params(void)
pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT;
pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT;
+
+ /* If XPA has been enabled, PTEs are 64-bit in size. */
+ if (read_c0_pagegrain() & PG_ELPA)
+ pwsize |= 1;
+
write_c0_pwsize(pwsize);
/* Make sure everything is set before we enable the HTW */
@@ -2298,6 +2339,28 @@ static void config_htw_params(void)
print_htw_config();
}
+static void config_xpa_params(void)
+{
+#ifdef CONFIG_XPA
+ unsigned int pagegrain;
+
+ if (mips_xpa_disabled) {
+ pr_info("Extended Physical Addressing (XPA) disabled\n");
+ return;
+ }
+
+ pagegrain = read_c0_pagegrain();
+ write_c0_pagegrain(pagegrain | PG_ELPA);
+ back_to_back_c0_hazard();
+ pagegrain = read_c0_pagegrain();
+
+ if (pagegrain & PG_ELPA)
+ pr_info("Extended Physical Addressing (XPA) enabled\n");
+ else
+ panic("Extended Physical Addressing (XPA) disabled");
+#endif
+}
+
void build_tlb_refill_handler(void)
{
/*
@@ -2362,8 +2425,9 @@ void build_tlb_refill_handler(void)
}
if (cpu_has_local_ebase)
build_r4000_tlb_refill_handler();
+ if (cpu_has_xpa)
+ config_xpa_params();
if (cpu_has_htw)
config_htw_params();
-
}
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH V6 3/3] MIPS: XPA: Add new configuration file.
2015-02-26 19:01 [PATCH V6 0/3] Add support for eXtended Physical Addressing Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 2/3] MIPS: Add support for XPA Steven J. Hill
@ 2015-02-26 19:01 ` Steven J. Hill
2 siblings, 0 replies; 5+ messages in thread
From: Steven J. Hill @ 2015-02-26 19:01 UTC (permalink / raw)
To: linux-mips; +Cc: ralf, Steven J. Hill
From: "Steven J. Hill" <Steven.Hill@imgtec.com>
Add in new config files for enabling a XPA platform.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
---
arch/mips/configs/maltaup_xpa_defconfig | 439 +++++++++++++++++++++++++++++++
1 file changed, 439 insertions(+)
create mode 100644 arch/mips/configs/maltaup_xpa_defconfig
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
new file mode 100644
index 0000000..c388bff
--- /dev/null
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -0,0 +1,439 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32_R5_FEATURES=y
+CONFIG_CPU_MIPS32_R5_XPA=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_HZ_100=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_EXPERT=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_SCTP=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_PHONET=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_CLS_IND=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_RFKILL=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_BLK_DEV_FD=m
+CONFIG_BLK_DEV_UMEM=m
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT8213=m
+CONFIG_BLK_DEV_TC86C001=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_PCNET32=y
+CONFIG_CHELSIO_T3=m
+CONFIG_AX88796=m
+CONFIG_NETXEN_NIC=m
+CONFIG_TC35815=m
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_LIBERTAS=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_HID=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC16=m
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions.
2015-02-26 19:01 ` [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions Steven J. Hill
@ 2015-02-26 20:04 ` David Daney
0 siblings, 0 replies; 5+ messages in thread
From: David Daney @ 2015-02-26 20:04 UTC (permalink / raw)
To: Steven J. Hill; +Cc: linux-mips, ralf
On 02/26/2015 11:01 AM, Steven J. Hill wrote:
> From: "Steven J. Hill" <Steven.Hill@imgtec.com>
>
> This patch rearranges the PTE bits into fixed positions for R2
> and later cores. In the past, the TLB handling code did runtime
> checking of RI/XI and adjusted the shifts and rotates in order
> to fit the largest PFN value into the PTE. The checking now
> occurs when building the TLB handler, thus eliminating those
> checks. These new arrangements also define the largest possible
> PFN value that can fit in the PTE. HUGE page support is only
> available on 64-bit platforms.
>
> The new layouts of the PTE bits are the following:
>
> 64-bit, R1 or earlier: CCC D V G [S H] M A W R P
> 32-bit, R1 or earler: CCC D V G M A W R P
> 64-bit, R2 or later: CCC D V G RI XI [S H] M A W R P
> 32-bit, R2 or later: CCC D V G RI XI M A W R P
>
> In the case of cores that support the RI/XI bits, the value of
> the R bit is ignored.
>
Why not just use RI for everything, instead of taking up two bits to
represent a single binary concept?
For the case where there is no RI hardware active, it is a purely
software bit and you can easily invert the meaning and just have a
_PAGE_NO_READ bit.
Also how does this change interact with __swp_type/_swp_offset/__swp_entry?
David Daney
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-02-26 20:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-02-26 19:01 [PATCH V6 0/3] Add support for eXtended Physical Addressing Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 1/3] MIPS: Rearrange PTE bits into fixed positions Steven J. Hill
2015-02-26 20:04 ` David Daney
2015-02-26 19:01 ` [PATCH V6 2/3] MIPS: Add support for XPA Steven J. Hill
2015-02-26 19:01 ` [PATCH V6 3/3] MIPS: XPA: Add new configuration file Steven J. Hill
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.