* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
This series is extracted from [4], which is trying to remove all
traces of gic_arch_extn from the tree. As some maintainers are more
responsive than others (understatement of the year...), I've decided
to split it per sub-arch, and get it moving, at least partially.
This series addresses OMAP{4,5} by converting the WUGEN to stacked
domains. The DRA7 crossbar gets the same treatment.
It is worth realizing that:
- I haven't been able to test this as much as I would have wanted to
(it's only been tested on omap4 and omap5).
- This actively *breaks* existing setups. Once you boot a new kernel
with an old DT, suspend/resume *will* be broken. Old kernels on a
new DT won't even boot! You've been warned. This really outline the
necessity of actually describing the HW in device trees...
Based on 4.0-rc1.
* From v5: [5]
- Allow interrupt affinity to be changed
* From v4: [4]
- Extracted from the full series
- Rebased on 4.0-rc1
* From v3 [3]:
- Rebased on top of the patch working around hardcoded IRQ on OMAP4/5 [4]
- Fixed more iMX6 DTs (Stephan)
- Fixed Exynos4/5 DTs
* From v2 [2]:
- Addressed numerous comments from Thierry
- Merged bug fixes from Nishanth
- Merged bug fix from Stefan
* From v1 [1]:
- Rebased on 3.19-rc3
- Fixed a number of additional platforms
- Added crossbar conversion to stacked domains
- Merged bug fixes from Nishanth
[5]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/325178.html
[4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/317531.html
[3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315385.html
[2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314041.html
[1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307338.html
Marc Zyngier (7):
genirq: Add irqchip_set_wake_parent
irqchip: crossbar: convert dra7 crossbar to stacked domains
DT: update ti,irq-crossbar binding
irqchip: GIC: get rid of routable domain
DT: arm,gic: kill arm,routable-irqs
DT: omap4/5: add binding for the wake-up generator
ARM: omap: convert wakeupgen to stacked domains
Documentation/devicetree/bindings/arm/gic.txt | 6 -
.../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
arch/arm/boot/dts/am4372.dtsi | 11 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 43 +++--
arch/arm/boot/dts/dra72-evm.dts | 1 -
arch/arm/boot/dts/dra72x.dtsi | 3 +-
arch/arm/boot/dts/dra74x.dtsi | 5 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 8 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
arch/arm/boot/dts/omap4.dtsi | 18 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
arch/arm/boot/dts/omap5-uevm.dts | 2 -
arch/arm/boot/dts/omap5.dtsi | 26 ++-
arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
arch/arm/mach-omap2/omap4-common.c | 27 +--
drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
drivers/irqchip/irq-gic.c | 59 +-----
include/linux/irq.h | 1 +
include/linux/irqchip/arm-gic.h | 6 -
include/linux/irqchip/irq-crossbar.h | 11 --
kernel/irq/chip.c | 16 ++
30 files changed, 376 insertions(+), 278 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
delete mode 100644 include/linux/irqchip/irq-crossbar.h
--
2.1.4
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
This series is extracted from [4], which is trying to remove all
traces of gic_arch_extn from the tree. As some maintainers are more
responsive than others (understatement of the year...), I've decided
to split it per sub-arch, and get it moving, at least partially.
This series addresses OMAP{4,5} by converting the WUGEN to stacked
domains. The DRA7 crossbar gets the same treatment.
It is worth realizing that:
- I haven't been able to test this as much as I would have wanted to
(it's only been tested on omap4 and omap5).
- This actively *breaks* existing setups. Once you boot a new kernel
with an old DT, suspend/resume *will* be broken. Old kernels on a
new DT won't even boot! You've been warned. This really outline the
necessity of actually describing the HW in device trees...
Based on 4.0-rc1.
* From v5: [5]
- Allow interrupt affinity to be changed
* From v4: [4]
- Extracted from the full series
- Rebased on 4.0-rc1
* From v3 [3]:
- Rebased on top of the patch working around hardcoded IRQ on OMAP4/5 [4]
- Fixed more iMX6 DTs (Stephan)
- Fixed Exynos4/5 DTs
* From v2 [2]:
- Addressed numerous comments from Thierry
- Merged bug fixes from Nishanth
- Merged bug fix from Stefan
* From v1 [1]:
- Rebased on 3.19-rc3
- Fixed a number of additional platforms
- Added crossbar conversion to stacked domains
- Merged bug fixes from Nishanth
[5]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/325178.html
[4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/317531.html
[3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315385.html
[2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314041.html
[1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307338.html
Marc Zyngier (7):
genirq: Add irqchip_set_wake_parent
irqchip: crossbar: convert dra7 crossbar to stacked domains
DT: update ti,irq-crossbar binding
irqchip: GIC: get rid of routable domain
DT: arm,gic: kill arm,routable-irqs
DT: omap4/5: add binding for the wake-up generator
ARM: omap: convert wakeupgen to stacked domains
Documentation/devicetree/bindings/arm/gic.txt | 6 -
.../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
arch/arm/boot/dts/am4372.dtsi | 11 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 43 +++--
arch/arm/boot/dts/dra72-evm.dts | 1 -
arch/arm/boot/dts/dra72x.dtsi | 3 +-
arch/arm/boot/dts/dra74x.dtsi | 5 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 8 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
arch/arm/boot/dts/omap4.dtsi | 18 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
arch/arm/boot/dts/omap5-uevm.dts | 2 -
arch/arm/boot/dts/omap5.dtsi | 26 ++-
arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
arch/arm/mach-omap2/omap4-common.c | 27 +--
drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
drivers/irqchip/irq-gic.c | 59 +-----
include/linux/irq.h | 1 +
include/linux/irqchip/arm-gic.h | 6 -
include/linux/irqchip/irq-crossbar.h | 11 --
kernel/irq/chip.c | 16 ++
30 files changed, 376 insertions(+), 278 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
delete mode 100644 include/linux/irqchip/irq-crossbar.h
--
2.1.4
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 1/7] genirq: Add irqchip_set_wake_parent
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
This proves to be useful with stacked domains, when the current
domain doesn't implement wake-up, but expect the parent to do so.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/irq.h | 1 +
kernel/irq/chip.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index d09ec7a..3057c48 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -460,6 +460,7 @@ extern void irq_chip_eoi_parent(struct irq_data *data);
extern int irq_chip_set_affinity_parent(struct irq_data *data,
const struct cpumask *dest,
bool force);
+extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
#endif
/* Handling of unhandled and spurious interrupts: */
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 6f1c7a5..eb9a4ea 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -948,6 +948,22 @@ int irq_chip_retrigger_hierarchy(struct irq_data *data)
return -ENOSYS;
}
+
+/**
+ * irq_chip_set_wake_parent - Set/reset wake-up on the parent interrupt
+ * @data: Pointer to interrupt specific data
+ * @on: Whether to set or reset the wake-up capability of this irq
+ *
+ * Conditional, as the underlying parent chip might not implement it.
+ */
+int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on)
+{
+ data = data->parent_data;
+ if (data->chip->irq_set_wake)
+ return data->chip->irq_set_wake(data, on);
+
+ return -ENOSYS;
+}
#endif
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 1/7] genirq: Add irqchip_set_wake_parent
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
This proves to be useful with stacked domains, when the current
domain doesn't implement wake-up, but expect the parent to do so.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/irq.h | 1 +
kernel/irq/chip.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index d09ec7a..3057c48 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -460,6 +460,7 @@ extern void irq_chip_eoi_parent(struct irq_data *data);
extern int irq_chip_set_affinity_parent(struct irq_data *data,
const struct cpumask *dest,
bool force);
+extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
#endif
/* Handling of unhandled and spurious interrupts: */
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 6f1c7a5..eb9a4ea 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -948,6 +948,22 @@ int irq_chip_retrigger_hierarchy(struct irq_data *data)
return -ENOSYS;
}
+
+/**
+ * irq_chip_set_wake_parent - Set/reset wake-up on the parent interrupt
+ * @data: Pointer to interrupt specific data
+ * @on: Whether to set or reset the wake-up capability of this irq
+ *
+ * Conditional, as the underlying parent chip might not implement it.
+ */
+int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on)
+{
+ data = data->parent_data;
+ if (data->chip->irq_set_wake)
+ return data->chip->irq_set_wake(data, on);
+
+ return -ENOSYS;
+}
#endif
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
Support for the TI crossbar used on the DRA7 family of chips
is implemented as an ugly hack on the side of the GIC.
Converting it to stacked domains makes it slightly more
palatable, as it results in a cleanup.
Unfortunately, as the DT bindings failed to acknowledge the
fact that this is actually yet another interrupt controller
(the third, actually), we have yet another breakage. Oh well.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 35 +++---
arch/arm/boot/dts/dra72-evm.dts | 1 -
arch/arm/boot/dts/dra72x.dtsi | 3 +-
arch/arm/boot/dts/dra74x.dtsi | 5 +-
arch/arm/mach-omap2/omap4-common.c | 4 -
drivers/irqchip/irq-crossbar.c | 210 +++++++++++++++++++-------------
include/linux/irqchip/irq-crossbar.h | 11 --
9 files changed, 149 insertions(+), 125 deletions(-)
delete mode 100644 include/linux/irqchip/irq-crossbar.h
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 03750af..170fbf9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -454,7 +454,6 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
pinctrl-names = "default";
@@ -477,7 +476,7 @@
&uart3 {
status = "okay";
- interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x248>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb..789ee58 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -446,7 +446,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
- interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..850f949 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -13,14 +13,13 @@
#include "skeleton.dtsi"
#define MAX_SOURCES 400
-#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,dra7xx";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&crossbar_mpu>;
aliases {
i2c0 = &i2c1;
@@ -50,18 +49,19 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
};
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
- arm,routable-irqs = <192>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
};
/*
@@ -91,8 +91,8 @@
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
@@ -344,7 +344,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -355,7 +355,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -366,7 +366,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -377,7 +377,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -388,7 +388,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -399,7 +399,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -410,7 +410,7 @@
uart7: serial@48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
- interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
@@ -419,7 +419,7 @@
uart8: serial@48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
- interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
@@ -428,7 +428,7 @@
uart9: serial@48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
- interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
@@ -437,7 +437,7 @@
uart10: serial@4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
- interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
@@ -1337,9 +1337,12 @@
status = "disabled";
};
- crossbar_mpu: crossbar@4a020000 {
+ crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d87117..2373054 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -160,7 +160,6 @@
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e5a3d23..e782bf1 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -25,6 +25,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 10173fa..0fc758d 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -41,8 +41,9 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
ocp {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cee0fe1..cf7aafb 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,7 +22,6 @@
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/genalloc.h>
@@ -292,8 +291,5 @@ void __init omap_gic_of_init(void)
skip_errata_init:
omap_wakeupgen_init();
-#ifdef CONFIG_IRQ_CROSSBAR
- irqcrossbar_init();
-#endif
irqchip_init();
}
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index bbbaf5d..692fe2b 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -11,11 +11,12 @@
*/
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/irq-crossbar.h>
+
+#include "irqchip.h"
#define IRQ_FREE -1
#define IRQ_RESERVED -2
@@ -24,6 +25,7 @@
/**
* struct crossbar_device - crossbar device description
+ * @lock: spinlock serializing access to @irq_map
* @int_max: maximum number of supported interrupts
* @safe_map: safe default value to initialize the crossbar
* @max_crossbar_sources: Maximum number of crossbar sources
@@ -33,6 +35,7 @@
* @write: register write function pointer
*/
struct crossbar_device {
+ raw_spinlock_t lock;
uint int_max;
uint safe_map;
uint max_crossbar_sources;
@@ -44,72 +47,101 @@ struct crossbar_device {
static struct crossbar_device *cb;
-static inline void crossbar_writel(int irq_no, int cb_no)
+static void crossbar_writel(int irq_no, int cb_no)
{
writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline void crossbar_writew(int irq_no, int cb_no)
+static void crossbar_writew(int irq_no, int cb_no)
{
writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline void crossbar_writeb(int irq_no, int cb_no)
+static void crossbar_writeb(int irq_no, int cb_no)
{
writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline int get_prev_map_irq(int cb_no)
-{
- int i;
-
- for (i = cb->int_max - 1; i >= 0; i--)
- if (cb->irq_map[i] == cb_no)
- return i;
-
- return -ENODEV;
-}
+static struct irq_chip crossbar_chip = {
+ .name = "CBAR",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_wake = irq_chip_set_wake_parent,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
-static inline int allocate_free_irq(int cb_no)
+static int allocate_gic_irq(struct irq_domain *domain, unsigned virq,
+ irq_hw_number_t hwirq)
{
+ struct of_phandle_args args;
int i;
+ int err;
+ raw_spin_lock(&cb->lock);
for (i = cb->int_max - 1; i >= 0; i--) {
if (cb->irq_map[i] == IRQ_FREE) {
- cb->irq_map[i] = cb_no;
- return i;
+ cb->irq_map[i] = hwirq;
+ break;
}
}
+ raw_spin_unlock(&cb->lock);
- return -ENODEV;
-}
+ if (i < 0)
+ return -ENODEV;
-static inline bool needs_crossbar_write(irq_hw_number_t hw)
-{
- int cb_no;
+ args.np = domain->parent->of_node;
+ args.args_count = 3;
+ args.args[0] = 0; /* SPI */
+ args.args[1] = i;
+ args.args[2] = IRQ_TYPE_LEVEL_HIGH;
- if (hw > GIC_IRQ_START) {
- cb_no = cb->irq_map[hw - GIC_IRQ_START];
- if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP)
- return true;
- }
+ err = irq_domain_alloc_irqs_parent(domain, virq, 1, &args);
+ if (err)
+ cb->irq_map[i] = IRQ_FREE;
+ else
+ cb->write(i, hwirq);
- return false;
+ return err;
}
-static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
+static int crossbar_domain_alloc(struct irq_domain *d, unsigned int virq,
+ unsigned int nr_irqs, void *data)
{
- if (needs_crossbar_write(hw))
- cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+ struct of_phandle_args *args = data;
+ irq_hw_number_t hwirq;
+ int i;
+
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if ((hwirq + nr_irqs) > cb->max_crossbar_sources)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++) {
+ int err = allocate_gic_irq(d, virq + i, hwirq + i);
+
+ if (err)
+ return err;
+
+ irq_domain_set_hwirq_and_chip(d, virq + i, hwirq + i,
+ &crossbar_chip, NULL);
+ }
return 0;
}
/**
- * crossbar_domain_unmap - unmap a crossbar<->irq connection
- * @d: domain of irq to unmap
- * @irq: virq number
+ * crossbar_domain_free - unmap/free a crossbar<->irq connection
+ * @domain: domain of irq to unmap
+ * @virq: virq number
+ * @nr_irqs: number of irqs to free
*
* We do not maintain a use count of total number of map/unmap
* calls for a particular irq to find out if a irq can be really
@@ -117,14 +149,20 @@ static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
* after which irq is anyways unusable. So an explicit map has to be called
* after that.
*/
-static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
+static void crossbar_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
{
- irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
+ int i;
- if (needs_crossbar_write(hw)) {
- cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
- cb->write(hw - GIC_IRQ_START, cb->safe_map);
+ raw_spin_lock(&cb->lock);
+ for (i = 0; i < nr_irqs; i++) {
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq + i);
+
+ irq_domain_reset_irq_data(d);
+ cb->irq_map[d->hwirq] = IRQ_FREE;
+ cb->write(d->hwirq, cb->safe_map);
}
+ raw_spin_unlock(&cb->lock);
}
static int crossbar_domain_xlate(struct irq_domain *d,
@@ -133,44 +171,22 @@ static int crossbar_domain_xlate(struct irq_domain *d,
unsigned long *out_hwirq,
unsigned int *out_type)
{
- int ret;
- int req_num = intspec[1];
- int direct_map_num;
-
- if (req_num >= cb->max_crossbar_sources) {
- direct_map_num = req_num - cb->max_crossbar_sources;
- if (direct_map_num < cb->int_max) {
- ret = cb->irq_map[direct_map_num];
- if (ret == IRQ_RESERVED || ret == IRQ_SKIP) {
- /* We use the interrupt num as h/w irq num */
- ret = direct_map_num;
- goto found;
- }
- }
-
- pr_err("%s: requested crossbar number %d > max %d\n",
- __func__, req_num, cb->max_crossbar_sources);
- return -EINVAL;
- }
-
- ret = get_prev_map_irq(req_num);
- if (ret >= 0)
- goto found;
-
- ret = allocate_free_irq(req_num);
-
- if (ret < 0)
- return ret;
-
-found:
- *out_hwirq = ret + GIC_IRQ_START;
+ if (d->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
return 0;
}
-static const struct irq_domain_ops routable_irq_domain_ops = {
- .map = crossbar_domain_map,
- .unmap = crossbar_domain_unmap,
- .xlate = crossbar_domain_xlate
+static const struct irq_domain_ops crossbar_domain_ops = {
+ .alloc = crossbar_domain_alloc,
+ .free = crossbar_domain_free,
+ .xlate = crossbar_domain_xlate,
};
static int __init crossbar_of_init(struct device_node *node)
@@ -293,7 +309,8 @@ static int __init crossbar_of_init(struct device_node *node)
cb->write(i, cb->safe_map);
}
- register_routable_domain_ops(&routable_irq_domain_ops);
+ raw_spin_lock_init(&cb->lock);
+
return 0;
err_reg_offset:
@@ -309,18 +326,37 @@ err_cb:
return ret;
}
-static const struct of_device_id crossbar_match[] __initconst = {
- { .compatible = "ti,irq-crossbar" },
- {}
-};
-
-int __init irqcrossbar_init(void)
+static int __init irqcrossbar_init(struct device_node *node,
+ struct device_node *parent)
{
- struct device_node *np;
- np = of_find_matching_node(NULL, crossbar_match);
- if (!np)
+ struct irq_domain *parent_domain, *domain;
+ int err;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ err = crossbar_of_init(node);
+ if (err)
+ return err;
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0,
+ cb->max_crossbar_sources,
+ node, &crossbar_domain_ops,
+ NULL);
+ if (!domain) {
+ pr_err("%s: failed to allocated domain\n", node->full_name);
+ return -ENOMEM;
+ }
- crossbar_of_init(np);
return 0;
}
+
+IRQCHIP_DECLARE(ti_irqcrossbar, "ti,irq-crossbar", irqcrossbar_init);
diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h
deleted file mode 100644
index e5537b8..0000000
--- a/include/linux/irqchip/irq-crossbar.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * drivers/irqchip/irq-crossbar.h
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-int irqcrossbar_init(void);
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
Support for the TI crossbar used on the DRA7 family of chips
is implemented as an ugly hack on the side of the GIC.
Converting it to stacked domains makes it slightly more
palatable, as it results in a cleanup.
Unfortunately, as the DT bindings failed to acknowledge the
fact that this is actually yet another interrupt controller
(the third, actually), we have yet another breakage. Oh well.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 35 +++---
arch/arm/boot/dts/dra72-evm.dts | 1 -
arch/arm/boot/dts/dra72x.dtsi | 3 +-
arch/arm/boot/dts/dra74x.dtsi | 5 +-
arch/arm/mach-omap2/omap4-common.c | 4 -
drivers/irqchip/irq-crossbar.c | 210 +++++++++++++++++++-------------
include/linux/irqchip/irq-crossbar.h | 11 --
9 files changed, 149 insertions(+), 125 deletions(-)
delete mode 100644 include/linux/irqchip/irq-crossbar.h
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 03750af..170fbf9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -454,7 +454,6 @@
mcp_rtc: rtc at 6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
pinctrl-names = "default";
@@ -477,7 +476,7 @@
&uart3 {
status = "okay";
- interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x248>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb..789ee58 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -446,7 +446,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
- interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..850f949 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -13,14 +13,13 @@
#include "skeleton.dtsi"
#define MAX_SOURCES 400
-#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,dra7xx";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&crossbar_mpu>;
aliases {
i2c0 = &i2c1;
@@ -50,18 +49,19 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
};
gic: interrupt-controller at 48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
- arm,routable-irqs = <192>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
};
/*
@@ -91,8 +91,8 @@
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
prm: prm at 4ae06000 {
compatible = "ti,dra7-prm";
@@ -344,7 +344,7 @@
uart1: serial at 4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -355,7 +355,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -366,7 +366,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -377,7 +377,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -388,7 +388,7 @@
uart5: serial at 48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -399,7 +399,7 @@
uart6: serial at 48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -410,7 +410,7 @@
uart7: serial at 48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
- interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
@@ -419,7 +419,7 @@
uart8: serial at 48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
- interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
@@ -428,7 +428,7 @@
uart9: serial at 48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
- interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
@@ -437,7 +437,7 @@
uart10: serial at 4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
- interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
@@ -1337,9 +1337,12 @@
status = "disabled";
};
- crossbar_mpu: crossbar at 4a020000 {
+ crossbar_mpu: crossbar at 4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d87117..2373054 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -160,7 +160,6 @@
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e5a3d23..e782bf1 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -25,6 +25,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 10173fa..0fc758d 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -41,8 +41,9 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
ocp {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cee0fe1..cf7aafb 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,7 +22,6 @@
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/genalloc.h>
@@ -292,8 +291,5 @@ void __init omap_gic_of_init(void)
skip_errata_init:
omap_wakeupgen_init();
-#ifdef CONFIG_IRQ_CROSSBAR
- irqcrossbar_init();
-#endif
irqchip_init();
}
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index bbbaf5d..692fe2b 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -11,11 +11,12 @@
*/
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/irq-crossbar.h>
+
+#include "irqchip.h"
#define IRQ_FREE -1
#define IRQ_RESERVED -2
@@ -24,6 +25,7 @@
/**
* struct crossbar_device - crossbar device description
+ * @lock: spinlock serializing access to @irq_map
* @int_max: maximum number of supported interrupts
* @safe_map: safe default value to initialize the crossbar
* @max_crossbar_sources: Maximum number of crossbar sources
@@ -33,6 +35,7 @@
* @write: register write function pointer
*/
struct crossbar_device {
+ raw_spinlock_t lock;
uint int_max;
uint safe_map;
uint max_crossbar_sources;
@@ -44,72 +47,101 @@ struct crossbar_device {
static struct crossbar_device *cb;
-static inline void crossbar_writel(int irq_no, int cb_no)
+static void crossbar_writel(int irq_no, int cb_no)
{
writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline void crossbar_writew(int irq_no, int cb_no)
+static void crossbar_writew(int irq_no, int cb_no)
{
writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline void crossbar_writeb(int irq_no, int cb_no)
+static void crossbar_writeb(int irq_no, int cb_no)
{
writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
-static inline int get_prev_map_irq(int cb_no)
-{
- int i;
-
- for (i = cb->int_max - 1; i >= 0; i--)
- if (cb->irq_map[i] == cb_no)
- return i;
-
- return -ENODEV;
-}
+static struct irq_chip crossbar_chip = {
+ .name = "CBAR",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_wake = irq_chip_set_wake_parent,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
-static inline int allocate_free_irq(int cb_no)
+static int allocate_gic_irq(struct irq_domain *domain, unsigned virq,
+ irq_hw_number_t hwirq)
{
+ struct of_phandle_args args;
int i;
+ int err;
+ raw_spin_lock(&cb->lock);
for (i = cb->int_max - 1; i >= 0; i--) {
if (cb->irq_map[i] == IRQ_FREE) {
- cb->irq_map[i] = cb_no;
- return i;
+ cb->irq_map[i] = hwirq;
+ break;
}
}
+ raw_spin_unlock(&cb->lock);
- return -ENODEV;
-}
+ if (i < 0)
+ return -ENODEV;
-static inline bool needs_crossbar_write(irq_hw_number_t hw)
-{
- int cb_no;
+ args.np = domain->parent->of_node;
+ args.args_count = 3;
+ args.args[0] = 0; /* SPI */
+ args.args[1] = i;
+ args.args[2] = IRQ_TYPE_LEVEL_HIGH;
- if (hw > GIC_IRQ_START) {
- cb_no = cb->irq_map[hw - GIC_IRQ_START];
- if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP)
- return true;
- }
+ err = irq_domain_alloc_irqs_parent(domain, virq, 1, &args);
+ if (err)
+ cb->irq_map[i] = IRQ_FREE;
+ else
+ cb->write(i, hwirq);
- return false;
+ return err;
}
-static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
+static int crossbar_domain_alloc(struct irq_domain *d, unsigned int virq,
+ unsigned int nr_irqs, void *data)
{
- if (needs_crossbar_write(hw))
- cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+ struct of_phandle_args *args = data;
+ irq_hw_number_t hwirq;
+ int i;
+
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if ((hwirq + nr_irqs) > cb->max_crossbar_sources)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++) {
+ int err = allocate_gic_irq(d, virq + i, hwirq + i);
+
+ if (err)
+ return err;
+
+ irq_domain_set_hwirq_and_chip(d, virq + i, hwirq + i,
+ &crossbar_chip, NULL);
+ }
return 0;
}
/**
- * crossbar_domain_unmap - unmap a crossbar<->irq connection
- * @d: domain of irq to unmap
- * @irq: virq number
+ * crossbar_domain_free - unmap/free a crossbar<->irq connection
+ * @domain: domain of irq to unmap
+ * @virq: virq number
+ * @nr_irqs: number of irqs to free
*
* We do not maintain a use count of total number of map/unmap
* calls for a particular irq to find out if a irq can be really
@@ -117,14 +149,20 @@ static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
* after which irq is anyways unusable. So an explicit map has to be called
* after that.
*/
-static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
+static void crossbar_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
{
- irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
+ int i;
- if (needs_crossbar_write(hw)) {
- cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
- cb->write(hw - GIC_IRQ_START, cb->safe_map);
+ raw_spin_lock(&cb->lock);
+ for (i = 0; i < nr_irqs; i++) {
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq + i);
+
+ irq_domain_reset_irq_data(d);
+ cb->irq_map[d->hwirq] = IRQ_FREE;
+ cb->write(d->hwirq, cb->safe_map);
}
+ raw_spin_unlock(&cb->lock);
}
static int crossbar_domain_xlate(struct irq_domain *d,
@@ -133,44 +171,22 @@ static int crossbar_domain_xlate(struct irq_domain *d,
unsigned long *out_hwirq,
unsigned int *out_type)
{
- int ret;
- int req_num = intspec[1];
- int direct_map_num;
-
- if (req_num >= cb->max_crossbar_sources) {
- direct_map_num = req_num - cb->max_crossbar_sources;
- if (direct_map_num < cb->int_max) {
- ret = cb->irq_map[direct_map_num];
- if (ret == IRQ_RESERVED || ret == IRQ_SKIP) {
- /* We use the interrupt num as h/w irq num */
- ret = direct_map_num;
- goto found;
- }
- }
-
- pr_err("%s: requested crossbar number %d > max %d\n",
- __func__, req_num, cb->max_crossbar_sources);
- return -EINVAL;
- }
-
- ret = get_prev_map_irq(req_num);
- if (ret >= 0)
- goto found;
-
- ret = allocate_free_irq(req_num);
-
- if (ret < 0)
- return ret;
-
-found:
- *out_hwirq = ret + GIC_IRQ_START;
+ if (d->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
return 0;
}
-static const struct irq_domain_ops routable_irq_domain_ops = {
- .map = crossbar_domain_map,
- .unmap = crossbar_domain_unmap,
- .xlate = crossbar_domain_xlate
+static const struct irq_domain_ops crossbar_domain_ops = {
+ .alloc = crossbar_domain_alloc,
+ .free = crossbar_domain_free,
+ .xlate = crossbar_domain_xlate,
};
static int __init crossbar_of_init(struct device_node *node)
@@ -293,7 +309,8 @@ static int __init crossbar_of_init(struct device_node *node)
cb->write(i, cb->safe_map);
}
- register_routable_domain_ops(&routable_irq_domain_ops);
+ raw_spin_lock_init(&cb->lock);
+
return 0;
err_reg_offset:
@@ -309,18 +326,37 @@ err_cb:
return ret;
}
-static const struct of_device_id crossbar_match[] __initconst = {
- { .compatible = "ti,irq-crossbar" },
- {}
-};
-
-int __init irqcrossbar_init(void)
+static int __init irqcrossbar_init(struct device_node *node,
+ struct device_node *parent)
{
- struct device_node *np;
- np = of_find_matching_node(NULL, crossbar_match);
- if (!np)
+ struct irq_domain *parent_domain, *domain;
+ int err;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ err = crossbar_of_init(node);
+ if (err)
+ return err;
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0,
+ cb->max_crossbar_sources,
+ node, &crossbar_domain_ops,
+ NULL);
+ if (!domain) {
+ pr_err("%s: failed to allocated domain\n", node->full_name);
+ return -ENOMEM;
+ }
- crossbar_of_init(np);
return 0;
}
+
+IRQCHIP_DECLARE(ti_irqcrossbar, "ti,irq-crossbar", irqcrossbar_init);
diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h
deleted file mode 100644
index e5537b8..0000000
--- a/include/linux/irqchip/irq-crossbar.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * drivers/irqchip/irq-crossbar.h
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-int irqcrossbar_init(void);
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 3/7] DT: update ti,irq-crossbar binding
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
Make it look like a real interrupt controller.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
.../devicetree/bindings/arm/omap/crossbar.txt | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 4139db3..a9b28d7 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
when the interrupt controller irq is unused (when not provided, default is 0)
Examples:
- crossbar_mpu: @4a020000 {
+ crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <400>;
ti,reg-size = <2>;
- ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
};
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
Example:
device_x@0x4a023000 {
@@ -55,9 +53,3 @@ Example:
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...
};
-
- device_y@0x4a033000 {
- /* Direct mapped GIC SPI 1 used */
- interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
- ...
- };
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 3/7] DT: update ti,irq-crossbar binding
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
Make it look like a real interrupt controller.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
.../devicetree/bindings/arm/omap/crossbar.txt | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 4139db3..a9b28d7 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
when the interrupt controller irq is unused (when not provided, default is 0)
Examples:
- crossbar_mpu: @4a020000 {
+ crossbar_mpu: crossbar at 4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <400>;
ti,reg-size = <2>;
- ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
};
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
Example:
device_x at 0x4a023000 {
@@ -55,9 +53,3 @@ Example:
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...
};
-
- device_y at 0x4a033000 {
- /* Direct mapped GIC SPI 1 used */
- interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
- ...
- };
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 4/7] irqchip: GIC: get rid of routable domain
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
The only user of the so called "routable domain" functionality
now being fixed, let's clean up the GIC.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic.c | 59 ++++-------------------------------------
include/linux/irqchip/arm-gic.h | 6 -----
2 files changed, 5 insertions(+), 60 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 4634cf7..e3ca6da 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -798,15 +798,12 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
handle_fasteoi_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
- gic_routable_irq_domain_ops->map(d, irq, hw);
}
return 0;
}
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
{
- gic_routable_irq_domain_ops->unmap(d, irq);
}
static int gic_irq_domain_xlate(struct irq_domain *d,
@@ -825,16 +822,8 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
- if (!intspec[0]) {
- ret = gic_routable_irq_domain_ops->xlate(d, controller,
- intspec,
- intsize,
- out_hwirq,
- out_type);
-
- if (IS_ERR_VALUE(ret))
- return ret;
- }
+ if (!intspec[0])
+ *out_hwirq += 16;
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
@@ -891,37 +880,6 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.xlate = gic_irq_domain_xlate,
};
-/* Default functions for routable irq domain */
-static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- return 0;
-}
-
-static void gic_routable_irq_domain_unmap(struct irq_domain *d,
- unsigned int irq)
-{
-}
-
-static int gic_routable_irq_domain_xlate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
-{
- *out_hwirq += 16;
- return 0;
-}
-
-static const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
- .map = gic_routable_irq_domain_map,
- .unmap = gic_routable_irq_domain_unmap,
- .xlate = gic_routable_irq_domain_xlate,
-};
-
-const struct irq_domain_ops *gic_routable_irq_domain_ops =
- &gic_default_routable_irq_domain_ops;
-
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
@@ -929,7 +887,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
- int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
@@ -985,15 +942,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->gic_irqs = gic_irqs;
if (node) { /* DT case */
- const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
-
- if (!of_property_read_u32(node, "arm,routable-irqs",
- &nr_routable_irqs)) {
- ops = &gic_irq_domain_ops;
- gic_irqs = nr_routable_irqs;
- }
-
- gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
+ gic->domain = irq_domain_add_linear(node, gic_irqs,
+ &gic_irq_domain_hierarchy_ops,
+ gic);
} else { /* Non-DT case */
/*
* For primary GICs, skip over SGIs.
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 71d706d..3978c5b 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -115,11 +115,5 @@ int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
-extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
-static inline void __init register_routable_domain_ops
- (const struct irq_domain_ops *ops)
-{
- gic_routable_irq_domain_ops = ops;
-}
#endif /* __ASSEMBLY */
#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 4/7] irqchip: GIC: get rid of routable domain
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
The only user of the so called "routable domain" functionality
now being fixed, let's clean up the GIC.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic.c | 59 ++++-------------------------------------
include/linux/irqchip/arm-gic.h | 6 -----
2 files changed, 5 insertions(+), 60 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 4634cf7..e3ca6da 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -798,15 +798,12 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
handle_fasteoi_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
- gic_routable_irq_domain_ops->map(d, irq, hw);
}
return 0;
}
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
{
- gic_routable_irq_domain_ops->unmap(d, irq);
}
static int gic_irq_domain_xlate(struct irq_domain *d,
@@ -825,16 +822,8 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
- if (!intspec[0]) {
- ret = gic_routable_irq_domain_ops->xlate(d, controller,
- intspec,
- intsize,
- out_hwirq,
- out_type);
-
- if (IS_ERR_VALUE(ret))
- return ret;
- }
+ if (!intspec[0])
+ *out_hwirq += 16;
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
@@ -891,37 +880,6 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.xlate = gic_irq_domain_xlate,
};
-/* Default functions for routable irq domain */
-static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- return 0;
-}
-
-static void gic_routable_irq_domain_unmap(struct irq_domain *d,
- unsigned int irq)
-{
-}
-
-static int gic_routable_irq_domain_xlate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
-{
- *out_hwirq += 16;
- return 0;
-}
-
-static const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
- .map = gic_routable_irq_domain_map,
- .unmap = gic_routable_irq_domain_unmap,
- .xlate = gic_routable_irq_domain_xlate,
-};
-
-const struct irq_domain_ops *gic_routable_irq_domain_ops =
- &gic_default_routable_irq_domain_ops;
-
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
@@ -929,7 +887,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
- int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
@@ -985,15 +942,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->gic_irqs = gic_irqs;
if (node) { /* DT case */
- const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
-
- if (!of_property_read_u32(node, "arm,routable-irqs",
- &nr_routable_irqs)) {
- ops = &gic_irq_domain_ops;
- gic_irqs = nr_routable_irqs;
- }
-
- gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
+ gic->domain = irq_domain_add_linear(node, gic_irqs,
+ &gic_irq_domain_hierarchy_ops,
+ gic);
} else { /* Non-DT case */
/*
* For primary GICs, skip over SGIs.
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 71d706d..3978c5b 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -115,11 +115,5 @@ int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
-extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
-static inline void __init register_routable_domain_ops
- (const struct irq_domain_ops *ops)
-{
- gic_routable_irq_domain_ops = ops;
-}
#endif /* __ASSEMBLY */
#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 5/7] DT: arm,gic: kill arm,routable-irqs
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
Nobody will regret it.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
Documentation/devicetree/bindings/arm/gic.txt | 6 ------
1 file changed, 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c97484b..1e0d212 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -56,11 +56,6 @@ Optional
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
- connected from the peripherals, but are routed dynamically
- by a crossbar/multiplexer preceding the GIC. The GIC irq
- input line is assigned dynamically when the corresponding
- peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller@fff11000 {
@@ -68,7 +63,6 @@ Example:
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
- arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 5/7] DT: arm,gic: kill arm,routable-irqs
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
Nobody will regret it.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
Documentation/devicetree/bindings/arm/gic.txt | 6 ------
1 file changed, 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c97484b..1e0d212 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -56,11 +56,6 @@ Optional
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
- connected from the peripherals, but are routed dynamically
- by a crossbar/multiplexer preceding the GIC. The GIC irq
- input line is assigned dynamically when the corresponding
- peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller at fff11000 {
@@ -68,7 +63,6 @@ Example:
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
- arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 6/7] DT: omap4/5: add binding for the wake-up generator
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
Add a binding for the OMAP4/5 wake-up generator, which acts as
an interrupt controller feeding into the GIC.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 0000000..43effa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,33 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Reguired properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+ "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+- interrupt-parent : a phandle to the GIC these interrupts are routed
+ to.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+ are explicitly forbiden.
+
+Example:
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 6/7] DT: omap4/5: add binding for the wake-up generator
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
Add a binding for the OMAP4/5 wake-up generator, which acts as
an interrupt controller feeding into the GIC.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 0000000..43effa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,33 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Reguired properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+ "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+- interrupt-parent : a phandle to the GIC these interrupts are routed
+ to.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+ are explicitly forbiden.
+
+Example:
+
+ wakeupgen: interrupt-controller at 48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 7/7] ARM: omap: convert wakeupgen to stacked domains
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-11 15:43 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: Benoit Cousson, Tony Lindgren, Nishanth Menon, Santosh Shilimkar,
Jason Cooper, Thomas Gleixner, Rob Herring, Mark Rutland
Cc: linux-arm-kernel, linux-omap
OMAP4/5 has been (ab)using the gic_arch_extn to provide
wakeup from suspend, and it makes a lot of sense to convert
this code to use stacked domains instead.
This patch does just this, updating the DT files to actually
reflect what the HW provides.
BIG FAT WARNING: because the DTs were so far lying by not
exposing the WUGEN HW block, kernels with this patch applied
won't have any suspend-resume facility when booted with old DTs,
and old kernels with updated DTs won't even boot.
On a platform with this patch applied, the system looks like
this:
root@bacon-fat:~# cat /proc/interrupts
CPU0 CPU1
16: 0 0 WUGEN 37 gp_timer
19: 233799 155916 GIC 27 arch_timer
23: 0 0 WUGEN 9 l3-dbg-irq
24: 1 0 WUGEN 10 l3-app-irq
27: 282 0 WUGEN 13 omap-dma-engine
44: 0 0 4ae10000.gpio 13 DMA
294: 0 0 WUGEN 20 gpmc
297: 506 0 WUGEN 56 48070000.i2c
298: 0 0 WUGEN 57 48072000.i2c
299: 0 0 WUGEN 61 48060000.i2c
300: 0 0 WUGEN 62 4807a000.i2c
301: 8 0 WUGEN 60 4807c000.i2c
308: 2439 0 WUGEN 74 OMAP UART2
312: 362 0 WUGEN 83 mmc2
313: 502 0 WUGEN 86 mmc0
314: 13 0 WUGEN 94 mmc1
350: 0 0 PRCM pinctrl, pinctrl
406: 35155709 0 GIC 109 ehci_hcd:usb1
407: 0 0 WUGEN 7 palmas
409: 0 0 WUGEN 119 twl6040
410: 0 0 twl6040 5 twl6040_irq_ready
411: 0 0 twl6040 0 twl6040_irq_th
IPI0: 0 1 CPU wakeup interrupts
IPI1: 0 0 Timer broadcast interrupts
IPI2: 95334 902334 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 479 648 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 0 0 IRQ work interrupts
IPI7: 0 0 completion interrupts
Err: 0
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/boot/dts/am4372.dtsi | 11 ++-
arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
arch/arm/boot/dts/dra7.dtsi | 12 ++-
arch/arm/boot/dts/dra72x.dtsi | 2 +-
arch/arm/boot/dts/dra74x.dtsi | 2 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 8 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
arch/arm/boot/dts/omap4.dtsi | 18 ++++-
arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
arch/arm/boot/dts/omap5-uevm.dts | 2 -
arch/arm/boot/dts/omap5.dtsi | 26 +++---
arch/arm/mach-omap2/omap-wakeupgen.c | 128 +++++++++++++++++++++++-------
arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
arch/arm/mach-omap2/omap4-common.c | 23 +++---
18 files changed, 171 insertions(+), 78 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..8a099bc 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -15,7 +15,7 @@
/ {
compatible = "ti,am4372", "ti,am43";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
@@ -48,6 +48,15 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
l2-cache-controller@48242000 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f84d971..26956cb 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -352,7 +352,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 832d243..8ae29c9 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -392,7 +392,6 @@
tps@24 {
compatible = "ti,tps65218";
reg = <0x24>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..1d71091 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -369,7 +369,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 850f949..c65eea0 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -64,6 +64,14 @@
interrupt-parent = <&gic>;
};
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -92,7 +100,7 @@
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
@@ -1341,7 +1349,7 @@
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
interrupt-controller;
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e782bf1..f7fb0d0 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -25,7 +25,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 0fc758d..00eeed7 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -41,7 +41,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index e860ccd..f2a94fa 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -173,14 +173,12 @@
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
vio-supply = <&v1v8>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 1505135..7c15fb2 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -372,7 +372,6 @@
reg = <0x48>;
/* IRQ# = 7 */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@@ -384,7 +383,6 @@
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
@@ -479,17 +477,17 @@
};
&uart2 {
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
};
&uart3 {
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
};
&uart4 {
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43..8aca8da 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -363,7 +363,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@@ -375,7 +374,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
@@ -570,21 +568,21 @@
};
&uart2 {
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 062701e..a4f1ba2 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -185,7 +185,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@@ -197,7 +196,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
vio-supply = <&v1v8>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..7cb5236 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -14,7 +14,7 @@
/ {
compatible = "ti,omap4430", "ti,omap4";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@@ -56,6 +56,7 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
};
L2: l2-cache-controller@48242000 {
@@ -70,6 +71,15 @@
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
/*
@@ -319,7 +329,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -327,7 +337,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -335,7 +345,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index b54b271..61ad2ea 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -412,7 +412,6 @@
palmas: palmas@48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 159720d..74777a6 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -311,7 +311,6 @@
palmas: palmas@48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -521,7 +520,6 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
vio-supply = <&smps7_reg>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..b056156 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -18,7 +18,7 @@
#size-cells = <1>;
compatible = "ti,omap5";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@@ -79,6 +79,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
};
pmu {
@@ -95,6 +96,15 @@
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
/*
@@ -458,7 +468,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
@@ -466,7 +476,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -474,7 +484,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -482,7 +492,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
@@ -490,7 +500,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
@@ -498,7 +508,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
@@ -883,14 +893,12 @@
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index f961c46..3b56722 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -20,11 +20,12 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
-#include <linux/irqchip/arm-gic.h>
#include "omap-wakeupgen.h"
#include "omap-secure.h"
@@ -78,29 +79,12 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx)
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
- unsigned int spi_irq;
-
- /*
- * PPIs and SGIs are not supported.
- */
- if (irq < OMAP44XX_IRQ_GIC_START)
- return -EINVAL;
-
- /*
- * Subtract the GIC offset.
- */
- spi_irq = irq - OMAP44XX_IRQ_GIC_START;
- if (spi_irq > MAX_IRQS) {
- pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
- return -EINVAL;
- }
-
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
- *reg_index = spi_irq >> 5;
- *bit_posn = spi_irq %= 32;
+ *reg_index = irq >> 5;
+ *bit_posn = irq %= 32;
return 0;
}
@@ -141,6 +125,7 @@ static void wakeupgen_mask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ irq_chip_mask_parent(d);
}
/*
@@ -153,6 +138,7 @@ static void wakeupgen_unmask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ irq_chip_unmask_parent(d);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -400,15 +386,91 @@ int omap_secure_apis_support(void)
return omap_secure_apis;
}
+static struct irq_chip wakeupgen_chip = {
+ .name = "WUGEN",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = wakeupgen_mask,
+ .irq_unmask = wakeupgen_unmask,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int wakeupgen_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (domain->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int wakeupgen_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs, void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
+ int i;
+
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if (hwirq >= MAX_IRQS)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &wakeupgen_chip, NULL);
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops wakeupgen_domain_ops = {
+ .xlate = wakeupgen_domain_xlate,
+ .alloc = wakeupgen_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
/*
* Initialise the wakeupgen module.
*/
-int __init omap_wakeupgen_init(void)
+static int __init wakeupgen_init(struct device_node *node,
+ struct device_node *parent)
{
+ struct irq_domain *parent_domain, *domain;
int i;
unsigned int boot_cpu = smp_processor_id();
u32 val;
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
@@ -416,7 +478,7 @@ int __init omap_wakeupgen_init(void)
}
/* Static mapping, never released */
- wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
+ wakeupgen_base = of_iomap(node, 0);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
@@ -429,6 +491,14 @@ int __init omap_wakeupgen_init(void)
max_irqs = AM43XX_IRQS;
}
+ domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
+ node, &wakeupgen_domain_ops,
+ NULL);
+ if (!domain) {
+ iounmap(wakeupgen_base);
+ return -ENOMEM;
+ }
+
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
@@ -437,14 +507,6 @@ int __init omap_wakeupgen_init(void)
}
/*
- * Override GIC architecture specific functions to add
- * OMAP WakeupGen interrupt controller along with GIC
- */
- gic_arch_extn.irq_mask = wakeupgen_mask;
- gic_arch_extn.irq_unmask = wakeupgen_unmask;
- gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
-
- /*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
@@ -474,3 +536,9 @@ int __init omap_wakeupgen_init(void)
return 0;
}
+
+/*
+ * We cannot use the IRQCHIP_DECLARE macro that lives in
+ * drivers/irqchip, so we're forced to roll our own. Not very nice.
+ */
+OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
index b3c8ecc..a3491ad 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/omap-wakeupgen.h
@@ -33,7 +33,6 @@
#define OMAP_TIMESTAMPCYCLELO 0xc08
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
-extern int __init omap_wakeupgen_init(void);
extern void __iomem *omap_get_wakeupgen_base(void);
extern int omap_secure_apis_support(void);
#endif
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cf7aafb..7bb116a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -241,26 +241,26 @@ static int __init omap4_sar_ram_init(void)
}
omap_early_initcall(omap4_sar_ram_init);
-static const struct of_device_id gic_match[] = {
- { .compatible = "arm,cortex-a9-gic", },
- { .compatible = "arm,cortex-a15-gic", },
+static const struct of_device_id intc_match[] = {
+ { .compatible = "ti,omap4-wugen-mpu", },
+ { .compatible = "ti,omap5-wugen-mpu", },
{ },
};
-static struct device_node *gic_node;
+static struct device_node *intc_node;
unsigned int omap4_xlate_irq(unsigned int hwirq)
{
struct of_phandle_args irq_data;
unsigned int irq;
- if (!gic_node)
- gic_node = of_find_matching_node(NULL, gic_match);
+ if (!intc_node)
+ intc_node = of_find_matching_node(NULL, intc_match);
- if (WARN_ON(!gic_node))
+ if (WARN_ON(!intc_node))
return hwirq;
- irq_data.np = gic_node;
+ irq_data.np = intc_node;
irq_data.args_count = 3;
irq_data.args[0] = 0;
irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
@@ -277,6 +277,12 @@ void __init omap_gic_of_init(void)
{
struct device_node *np;
+ intc_node = of_find_matching_node(NULL, intc_match);
+ if (WARN_ON(!intc_node)) {
+ pr_err("No WUGEN found in DT, system will misbehave.\n");
+ pr_err("UPDATE YOUR DEVICE TREE!\n");
+ }
+
/* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
if (!cpu_is_omap446x())
goto skip_errata_init;
@@ -290,6 +296,5 @@ void __init omap_gic_of_init(void)
WARN_ON(!twd_base);
skip_errata_init:
- omap_wakeupgen_init();
irqchip_init();
}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 7/7] ARM: omap: convert wakeupgen to stacked domains
@ 2015-03-11 15:43 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-11 15:43 UTC (permalink / raw)
To: linux-arm-kernel
OMAP4/5 has been (ab)using the gic_arch_extn to provide
wakeup from suspend, and it makes a lot of sense to convert
this code to use stacked domains instead.
This patch does just this, updating the DT files to actually
reflect what the HW provides.
BIG FAT WARNING: because the DTs were so far lying by not
exposing the WUGEN HW block, kernels with this patch applied
won't have any suspend-resume facility when booted with old DTs,
and old kernels with updated DTs won't even boot.
On a platform with this patch applied, the system looks like
this:
root at bacon-fat:~# cat /proc/interrupts
CPU0 CPU1
16: 0 0 WUGEN 37 gp_timer
19: 233799 155916 GIC 27 arch_timer
23: 0 0 WUGEN 9 l3-dbg-irq
24: 1 0 WUGEN 10 l3-app-irq
27: 282 0 WUGEN 13 omap-dma-engine
44: 0 0 4ae10000.gpio 13 DMA
294: 0 0 WUGEN 20 gpmc
297: 506 0 WUGEN 56 48070000.i2c
298: 0 0 WUGEN 57 48072000.i2c
299: 0 0 WUGEN 61 48060000.i2c
300: 0 0 WUGEN 62 4807a000.i2c
301: 8 0 WUGEN 60 4807c000.i2c
308: 2439 0 WUGEN 74 OMAP UART2
312: 362 0 WUGEN 83 mmc2
313: 502 0 WUGEN 86 mmc0
314: 13 0 WUGEN 94 mmc1
350: 0 0 PRCM pinctrl, pinctrl
406: 35155709 0 GIC 109 ehci_hcd:usb1
407: 0 0 WUGEN 7 palmas
409: 0 0 WUGEN 119 twl6040
410: 0 0 twl6040 5 twl6040_irq_ready
411: 0 0 twl6040 0 twl6040_irq_th
IPI0: 0 1 CPU wakeup interrupts
IPI1: 0 0 Timer broadcast interrupts
IPI2: 95334 902334 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 479 648 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 0 0 IRQ work interrupts
IPI7: 0 0 completion interrupts
Err: 0
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/boot/dts/am4372.dtsi | 11 ++-
arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
arch/arm/boot/dts/dra7.dtsi | 12 ++-
arch/arm/boot/dts/dra72x.dtsi | 2 +-
arch/arm/boot/dts/dra74x.dtsi | 2 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 8 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
arch/arm/boot/dts/omap4.dtsi | 18 ++++-
arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
arch/arm/boot/dts/omap5-uevm.dts | 2 -
arch/arm/boot/dts/omap5.dtsi | 26 +++---
arch/arm/mach-omap2/omap-wakeupgen.c | 128 +++++++++++++++++++++++-------
arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
arch/arm/mach-omap2/omap4-common.c | 23 +++---
18 files changed, 171 insertions(+), 78 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..8a099bc 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -15,7 +15,7 @@
/ {
compatible = "ti,am4372", "ti,am43";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
@@ -48,6 +48,15 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller at 48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
l2-cache-controller at 48242000 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f84d971..26956cb 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -352,7 +352,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 832d243..8ae29c9 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -392,7 +392,6 @@
tps at 24 {
compatible = "ti,tps65218";
reg = <0x24>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..1d71091 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -369,7 +369,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
- interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 850f949..c65eea0 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -64,6 +64,14 @@
interrupt-parent = <&gic>;
};
+ wakeupgen: interrupt-controller at 48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -92,7 +100,7 @@
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
prm: prm at 4ae06000 {
compatible = "ti,dra7-prm";
@@ -1341,7 +1349,7 @@
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
interrupt-controller;
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index e782bf1..f7fb0d0 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -25,7 +25,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 0fc758d..00eeed7 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -41,7 +41,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index e860ccd..f2a94fa 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -173,14 +173,12 @@
twl: twl at 48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl at 4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
vio-supply = <&v1v8>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 1505135..7c15fb2 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -372,7 +372,6 @@
reg = <0x48>;
/* IRQ# = 7 */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl at 4b {
@@ -384,7 +383,6 @@
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
@@ -479,17 +477,17 @@
};
&uart2 {
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
};
&uart3 {
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
};
&uart4 {
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43..8aca8da 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -363,7 +363,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl at 4b {
@@ -375,7 +374,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
@@ -570,21 +568,21 @@
};
&uart2 {
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 062701e..a4f1ba2 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -185,7 +185,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
};
twl6040: twl at 4b {
@@ -197,7 +196,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
vio-supply = <&v1v8>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..7cb5236 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -14,7 +14,7 @@
/ {
compatible = "ti,omap4430", "ti,omap4";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@@ -56,6 +56,7 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
+ interrupt-parent = <&gic>;
};
L2: l2-cache-controller at 48242000 {
@@ -70,6 +71,15 @@
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller at 48281000 {
+ compatible = "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
/*
@@ -319,7 +329,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -327,7 +337,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -335,7 +345,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index b54b271..61ad2ea 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -412,7 +412,6 @@
palmas: palmas at 48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 159720d..74777a6 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -311,7 +311,6 @@
palmas: palmas at 48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
- interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -521,7 +520,6 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
vio-supply = <&smps7_reg>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..b056156 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -18,7 +18,7 @@
#size-cells = <1>;
compatible = "ti,omap5";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@@ -79,6 +79,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
};
pmu {
@@ -95,6 +96,15 @@
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller at 48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
};
/*
@@ -458,7 +468,7 @@
uart1: serial at 4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
@@ -466,7 +476,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -474,7 +484,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -482,7 +492,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
@@ -490,7 +500,7 @@
uart5: serial at 48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
@@ -498,7 +508,7 @@
uart6: serial at 48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
@@ -883,14 +893,12 @@
usbhsohci: ohci at 4a064800 {
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci at 4a064c00 {
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index f961c46..3b56722 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -20,11 +20,12 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
-#include <linux/irqchip/arm-gic.h>
#include "omap-wakeupgen.h"
#include "omap-secure.h"
@@ -78,29 +79,12 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx)
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
- unsigned int spi_irq;
-
- /*
- * PPIs and SGIs are not supported.
- */
- if (irq < OMAP44XX_IRQ_GIC_START)
- return -EINVAL;
-
- /*
- * Subtract the GIC offset.
- */
- spi_irq = irq - OMAP44XX_IRQ_GIC_START;
- if (spi_irq > MAX_IRQS) {
- pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
- return -EINVAL;
- }
-
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
- *reg_index = spi_irq >> 5;
- *bit_posn = spi_irq %= 32;
+ *reg_index = irq >> 5;
+ *bit_posn = irq %= 32;
return 0;
}
@@ -141,6 +125,7 @@ static void wakeupgen_mask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ irq_chip_mask_parent(d);
}
/*
@@ -153,6 +138,7 @@ static void wakeupgen_unmask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ irq_chip_unmask_parent(d);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -400,15 +386,91 @@ int omap_secure_apis_support(void)
return omap_secure_apis;
}
+static struct irq_chip wakeupgen_chip = {
+ .name = "WUGEN",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = wakeupgen_mask,
+ .irq_unmask = wakeupgen_unmask,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int wakeupgen_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (domain->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int wakeupgen_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs, void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
+ int i;
+
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if (hwirq >= MAX_IRQS)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &wakeupgen_chip, NULL);
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops wakeupgen_domain_ops = {
+ .xlate = wakeupgen_domain_xlate,
+ .alloc = wakeupgen_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
/*
* Initialise the wakeupgen module.
*/
-int __init omap_wakeupgen_init(void)
+static int __init wakeupgen_init(struct device_node *node,
+ struct device_node *parent)
{
+ struct irq_domain *parent_domain, *domain;
int i;
unsigned int boot_cpu = smp_processor_id();
u32 val;
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
@@ -416,7 +478,7 @@ int __init omap_wakeupgen_init(void)
}
/* Static mapping, never released */
- wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
+ wakeupgen_base = of_iomap(node, 0);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
@@ -429,6 +491,14 @@ int __init omap_wakeupgen_init(void)
max_irqs = AM43XX_IRQS;
}
+ domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
+ node, &wakeupgen_domain_ops,
+ NULL);
+ if (!domain) {
+ iounmap(wakeupgen_base);
+ return -ENOMEM;
+ }
+
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
@@ -437,14 +507,6 @@ int __init omap_wakeupgen_init(void)
}
/*
- * Override GIC architecture specific functions to add
- * OMAP WakeupGen interrupt controller along with GIC
- */
- gic_arch_extn.irq_mask = wakeupgen_mask;
- gic_arch_extn.irq_unmask = wakeupgen_unmask;
- gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
-
- /*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
@@ -474,3 +536,9 @@ int __init omap_wakeupgen_init(void)
return 0;
}
+
+/*
+ * We cannot use the IRQCHIP_DECLARE macro that lives in
+ * drivers/irqchip, so we're forced to roll our own. Not very nice.
+ */
+OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
index b3c8ecc..a3491ad 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/omap-wakeupgen.h
@@ -33,7 +33,6 @@
#define OMAP_TIMESTAMPCYCLELO 0xc08
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
-extern int __init omap_wakeupgen_init(void);
extern void __iomem *omap_get_wakeupgen_base(void);
extern int omap_secure_apis_support(void);
#endif
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cf7aafb..7bb116a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -241,26 +241,26 @@ static int __init omap4_sar_ram_init(void)
}
omap_early_initcall(omap4_sar_ram_init);
-static const struct of_device_id gic_match[] = {
- { .compatible = "arm,cortex-a9-gic", },
- { .compatible = "arm,cortex-a15-gic", },
+static const struct of_device_id intc_match[] = {
+ { .compatible = "ti,omap4-wugen-mpu", },
+ { .compatible = "ti,omap5-wugen-mpu", },
{ },
};
-static struct device_node *gic_node;
+static struct device_node *intc_node;
unsigned int omap4_xlate_irq(unsigned int hwirq)
{
struct of_phandle_args irq_data;
unsigned int irq;
- if (!gic_node)
- gic_node = of_find_matching_node(NULL, gic_match);
+ if (!intc_node)
+ intc_node = of_find_matching_node(NULL, intc_match);
- if (WARN_ON(!gic_node))
+ if (WARN_ON(!intc_node))
return hwirq;
- irq_data.np = gic_node;
+ irq_data.np = intc_node;
irq_data.args_count = 3;
irq_data.args[0] = 0;
irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
@@ -277,6 +277,12 @@ void __init omap_gic_of_init(void)
{
struct device_node *np;
+ intc_node = of_find_matching_node(NULL, intc_match);
+ if (WARN_ON(!intc_node)) {
+ pr_err("No WUGEN found in DT, system will misbehave.\n");
+ pr_err("UPDATE YOUR DEVICE TREE!\n");
+ }
+
/* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
if (!cpu_is_omap446x())
goto skip_errata_init;
@@ -290,6 +296,5 @@ void __init omap_gic_of_init(void)
WARN_ON(!twd_base);
skip_errata_init:
- omap_wakeupgen_init();
irqchip_init();
}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-13 15:40 ` Tony Lindgren
-1 siblings, 0 replies; 26+ messages in thread
From: Tony Lindgren @ 2015-03-13 15:40 UTC (permalink / raw)
To: Marc Zyngier
Cc: Benoit Cousson, Nishanth Menon, Santosh Shilimkar, Jason Cooper,
Thomas Gleixner, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-omap
* Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> This series is extracted from [4], which is trying to remove all
> traces of gic_arch_extn from the tree. As some maintainers are more
> responsive than others (understatement of the year...), I've decided
> to split it per sub-arch, and get it moving, at least partially.
>
> This series addresses OMAP{4,5} by converting the WUGEN to stacked
> domains. The DRA7 crossbar gets the same treatment.
...
>
> Documentation/devicetree/bindings/arm/gic.txt | 6 -
> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> arch/arm/boot/dts/am4372.dtsi | 11 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 2 +-
> arch/arm/boot/dts/dra7.dtsi | 43 +++--
> arch/arm/boot/dts/dra72-evm.dts | 1 -
> arch/arm/boot/dts/dra72x.dtsi | 3 +-
> arch/arm/boot/dts/dra74x.dtsi | 5 +-
> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> arch/arm/boot/dts/omap4.dtsi | 18 +-
> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> arch/arm/boot/dts/omap5-uevm.dts | 2 -
> arch/arm/boot/dts/omap5.dtsi | 26 ++-
> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> arch/arm/mach-omap2/omap4-common.c | 27 +--
> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> drivers/irqchip/irq-gic.c | 59 +-----
> include/linux/irq.h | 1 +
> include/linux/irqchip/arm-gic.h | 6 -
> include/linux/irqchip/irq-crossbar.h | 11 --
> kernel/irq/chip.c | 16 ++
> 30 files changed, 376 insertions(+), 278 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> delete mode 100644 include/linux/irqchip/irq-crossbar.h
For merging this, how about Marc sets up an immutable branch against
v4.0-rc1 that both Jason and I can merge it in? Then Jason can
send the pull request I can sort out the merge conflict issues.
Regards,
Tony
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-13 15:40 ` Tony Lindgren
0 siblings, 0 replies; 26+ messages in thread
From: Tony Lindgren @ 2015-03-13 15:40 UTC (permalink / raw)
To: linux-arm-kernel
* Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> This series is extracted from [4], which is trying to remove all
> traces of gic_arch_extn from the tree. As some maintainers are more
> responsive than others (understatement of the year...), I've decided
> to split it per sub-arch, and get it moving, at least partially.
>
> This series addresses OMAP{4,5} by converting the WUGEN to stacked
> domains. The DRA7 crossbar gets the same treatment.
...
>
> Documentation/devicetree/bindings/arm/gic.txt | 6 -
> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> arch/arm/boot/dts/am4372.dtsi | 11 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 2 +-
> arch/arm/boot/dts/dra7.dtsi | 43 +++--
> arch/arm/boot/dts/dra72-evm.dts | 1 -
> arch/arm/boot/dts/dra72x.dtsi | 3 +-
> arch/arm/boot/dts/dra74x.dtsi | 5 +-
> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> arch/arm/boot/dts/omap4.dtsi | 18 +-
> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> arch/arm/boot/dts/omap5-uevm.dts | 2 -
> arch/arm/boot/dts/omap5.dtsi | 26 ++-
> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> arch/arm/mach-omap2/omap4-common.c | 27 +--
> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> drivers/irqchip/irq-gic.c | 59 +-----
> include/linux/irq.h | 1 +
> include/linux/irqchip/arm-gic.h | 6 -
> include/linux/irqchip/irq-crossbar.h | 11 --
> kernel/irq/chip.c | 16 ++
> 30 files changed, 376 insertions(+), 278 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> delete mode 100644 include/linux/irqchip/irq-crossbar.h
For merging this, how about Marc sets up an immutable branch against
v4.0-rc1 that both Jason and I can merge it in? Then Jason can
send the pull request I can sort out the merge conflict issues.
Regards,
Tony
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
2015-03-13 15:40 ` Tony Lindgren
@ 2015-03-13 17:25 ` Jason Cooper
-1 siblings, 0 replies; 26+ messages in thread
From: Jason Cooper @ 2015-03-13 17:25 UTC (permalink / raw)
To: Tony Lindgren
Cc: Nishanth Menon, Mark Rutland, Marc Zyngier, Rob Herring,
Benoit Cousson, Santosh Shilimkar, Thomas Gleixner, linux-omap,
linux-arm-kernel
Hey Tony,
On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
> * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> > This series is extracted from [4], which is trying to remove all
> > traces of gic_arch_extn from the tree. As some maintainers are more
> > responsive than others (understatement of the year...), I've decided
> > to split it per sub-arch, and get it moving, at least partially.
> >
> > This series addresses OMAP{4,5} by converting the WUGEN to stacked
> > domains. The DRA7 crossbar gets the same treatment.
> ...
> >
> > Documentation/devicetree/bindings/arm/gic.txt | 6 -
> > .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> > .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> > arch/arm/boot/dts/am4372.dtsi | 11 +-
> > arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> > arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> > arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> > arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> > arch/arm/boot/dts/dra7-evm.dts | 2 +-
> > arch/arm/boot/dts/dra7.dtsi | 43 +++--
> > arch/arm/boot/dts/dra72-evm.dts | 1 -
> > arch/arm/boot/dts/dra72x.dtsi | 3 +-
> > arch/arm/boot/dts/dra74x.dtsi | 5 +-
> > arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> > arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> > arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> > arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> > arch/arm/boot/dts/omap4.dtsi | 18 +-
> > arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> > arch/arm/boot/dts/omap5-uevm.dts | 2 -
> > arch/arm/boot/dts/omap5.dtsi | 26 ++-
> > arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> > arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> > arch/arm/mach-omap2/omap4-common.c | 27 +--
> > drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> > drivers/irqchip/irq-gic.c | 59 +-----
> > include/linux/irq.h | 1 +
> > include/linux/irqchip/arm-gic.h | 6 -
> > include/linux/irqchip/irq-crossbar.h | 11 --
> > kernel/irq/chip.c | 16 ++
> > 30 files changed, 376 insertions(+), 278 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> > delete mode 100644 include/linux/irqchip/irq-crossbar.h
>
> For merging this, how about Marc sets up an immutable branch against
> v4.0-rc1 that both Jason and I can merge it in? Then Jason can
> send the pull request I can sort out the merge conflict issues.
If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
I apply patches for irqchip. If there are any nits you'd like me to fix while
I'm applying, just let me know.
thx,
Jason.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-13 17:25 ` Jason Cooper
0 siblings, 0 replies; 26+ messages in thread
From: Jason Cooper @ 2015-03-13 17:25 UTC (permalink / raw)
To: linux-arm-kernel
Hey Tony,
On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
> * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> > This series is extracted from [4], which is trying to remove all
> > traces of gic_arch_extn from the tree. As some maintainers are more
> > responsive than others (understatement of the year...), I've decided
> > to split it per sub-arch, and get it moving, at least partially.
> >
> > This series addresses OMAP{4,5} by converting the WUGEN to stacked
> > domains. The DRA7 crossbar gets the same treatment.
> ...
> >
> > Documentation/devicetree/bindings/arm/gic.txt | 6 -
> > .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> > .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> > arch/arm/boot/dts/am4372.dtsi | 11 +-
> > arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> > arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> > arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> > arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> > arch/arm/boot/dts/dra7-evm.dts | 2 +-
> > arch/arm/boot/dts/dra7.dtsi | 43 +++--
> > arch/arm/boot/dts/dra72-evm.dts | 1 -
> > arch/arm/boot/dts/dra72x.dtsi | 3 +-
> > arch/arm/boot/dts/dra74x.dtsi | 5 +-
> > arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> > arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> > arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> > arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> > arch/arm/boot/dts/omap4.dtsi | 18 +-
> > arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> > arch/arm/boot/dts/omap5-uevm.dts | 2 -
> > arch/arm/boot/dts/omap5.dtsi | 26 ++-
> > arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> > arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> > arch/arm/mach-omap2/omap4-common.c | 27 +--
> > drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> > drivers/irqchip/irq-gic.c | 59 +-----
> > include/linux/irq.h | 1 +
> > include/linux/irqchip/arm-gic.h | 6 -
> > include/linux/irqchip/irq-crossbar.h | 11 --
> > kernel/irq/chip.c | 16 ++
> > 30 files changed, 376 insertions(+), 278 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> > delete mode 100644 include/linux/irqchip/irq-crossbar.h
>
> For merging this, how about Marc sets up an immutable branch against
> v4.0-rc1 that both Jason and I can merge it in? Then Jason can
> send the pull request I can sort out the merge conflict issues.
If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
I apply patches for irqchip. If there are any nits you'd like me to fix while
I'm applying, just let me know.
thx,
Jason.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
2015-03-13 17:25 ` Jason Cooper
@ 2015-03-13 17:38 ` Tony Lindgren
-1 siblings, 0 replies; 26+ messages in thread
From: Tony Lindgren @ 2015-03-13 17:38 UTC (permalink / raw)
To: Jason Cooper
Cc: Marc Zyngier, Benoit Cousson, Nishanth Menon, Santosh Shilimkar,
Thomas Gleixner, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-omap
* Jason Cooper <jason@lakedaemon.net> [150313 10:25]:
> Hey Tony,
>
> On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
> > * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> > > This series is extracted from [4], which is trying to remove all
> > > traces of gic_arch_extn from the tree. As some maintainers are more
> > > responsive than others (understatement of the year...), I've decided
> > > to split it per sub-arch, and get it moving, at least partially.
> > >
> > > This series addresses OMAP{4,5} by converting the WUGEN to stacked
> > > domains. The DRA7 crossbar gets the same treatment.
> > ...
> > >
> > > Documentation/devicetree/bindings/arm/gic.txt | 6 -
> > > .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> > > .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> > > arch/arm/boot/dts/am4372.dtsi | 11 +-
> > > arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> > > arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> > > arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> > > arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> > > arch/arm/boot/dts/dra7-evm.dts | 2 +-
> > > arch/arm/boot/dts/dra7.dtsi | 43 +++--
> > > arch/arm/boot/dts/dra72-evm.dts | 1 -
> > > arch/arm/boot/dts/dra72x.dtsi | 3 +-
> > > arch/arm/boot/dts/dra74x.dtsi | 5 +-
> > > arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> > > arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> > > arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> > > arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> > > arch/arm/boot/dts/omap4.dtsi | 18 +-
> > > arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> > > arch/arm/boot/dts/omap5-uevm.dts | 2 -
> > > arch/arm/boot/dts/omap5.dtsi | 26 ++-
> > > arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> > > arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> > > arch/arm/mach-omap2/omap4-common.c | 27 +--
> > > drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> > > drivers/irqchip/irq-gic.c | 59 +-----
> > > include/linux/irq.h | 1 +
> > > include/linux/irqchip/arm-gic.h | 6 -
> > > include/linux/irqchip/irq-crossbar.h | 11 --
> > > kernel/irq/chip.c | 16 ++
> > > 30 files changed, 376 insertions(+), 278 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> > > delete mode 100644 include/linux/irqchip/irq-crossbar.h
> >
> > For merging this, how about Marc sets up an immutable branch against
> > v4.0-rc1 that both Jason and I can merge it in? Then Jason can
> > send the pull request I can sort out the merge conflict issues.
>
> If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
> I apply patches for irqchip. If there are any nits you'd like me to fix while
> I'm applying, just let me know.
That works for me thanks as long as it works for Marc.
Regards,
Tony
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-13 17:38 ` Tony Lindgren
0 siblings, 0 replies; 26+ messages in thread
From: Tony Lindgren @ 2015-03-13 17:38 UTC (permalink / raw)
To: linux-arm-kernel
* Jason Cooper <jason@lakedaemon.net> [150313 10:25]:
> Hey Tony,
>
> On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
> > * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
> > > This series is extracted from [4], which is trying to remove all
> > > traces of gic_arch_extn from the tree. As some maintainers are more
> > > responsive than others (understatement of the year...), I've decided
> > > to split it per sub-arch, and get it moving, at least partially.
> > >
> > > This series addresses OMAP{4,5} by converting the WUGEN to stacked
> > > domains. The DRA7 crossbar gets the same treatment.
> > ...
> > >
> > > Documentation/devicetree/bindings/arm/gic.txt | 6 -
> > > .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> > > .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> > > arch/arm/boot/dts/am4372.dtsi | 11 +-
> > > arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> > > arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> > > arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> > > arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> > > arch/arm/boot/dts/dra7-evm.dts | 2 +-
> > > arch/arm/boot/dts/dra7.dtsi | 43 +++--
> > > arch/arm/boot/dts/dra72-evm.dts | 1 -
> > > arch/arm/boot/dts/dra72x.dtsi | 3 +-
> > > arch/arm/boot/dts/dra74x.dtsi | 5 +-
> > > arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> > > arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> > > arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> > > arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> > > arch/arm/boot/dts/omap4.dtsi | 18 +-
> > > arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> > > arch/arm/boot/dts/omap5-uevm.dts | 2 -
> > > arch/arm/boot/dts/omap5.dtsi | 26 ++-
> > > arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> > > arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> > > arch/arm/mach-omap2/omap4-common.c | 27 +--
> > > drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> > > drivers/irqchip/irq-gic.c | 59 +-----
> > > include/linux/irq.h | 1 +
> > > include/linux/irqchip/arm-gic.h | 6 -
> > > include/linux/irqchip/irq-crossbar.h | 11 --
> > > kernel/irq/chip.c | 16 ++
> > > 30 files changed, 376 insertions(+), 278 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> > > delete mode 100644 include/linux/irqchip/irq-crossbar.h
> >
> > For merging this, how about Marc sets up an immutable branch against
> > v4.0-rc1 that both Jason and I can merge it in? Then Jason can
> > send the pull request I can sort out the merge conflict issues.
>
> If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
> I apply patches for irqchip. If there are any nits you'd like me to fix while
> I'm applying, just let me know.
That works for me thanks as long as it works for Marc.
Regards,
Tony
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
2015-03-13 17:38 ` Tony Lindgren
@ 2015-03-13 17:49 ` Marc Zyngier
-1 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-13 17:49 UTC (permalink / raw)
To: Tony Lindgren, Jason Cooper
Cc: Nishanth Menon, Mark Rutland, Rob Herring, Benoit Cousson,
Santosh Shilimkar, Thomas Gleixner, linux-omap, linux-arm-kernel
On 13/03/15 17:38, Tony Lindgren wrote:
> * Jason Cooper <jason@lakedaemon.net> [150313 10:25]:
>> Hey Tony,
>>
>> On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
>>> * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
>>>> This series is extracted from [4], which is trying to remove all
>>>> traces of gic_arch_extn from the tree. As some maintainers are more
>>>> responsive than others (understatement of the year...), I've decided
>>>> to split it per sub-arch, and get it moving, at least partially.
>>>>
>>>> This series addresses OMAP{4,5} by converting the WUGEN to stacked
>>>> domains. The DRA7 crossbar gets the same treatment.
>>> ...
>>>>
>>>> Documentation/devicetree/bindings/arm/gic.txt | 6 -
>>>> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
>>>> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
>>>> arch/arm/boot/dts/am4372.dtsi | 11 +-
>>>> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
>>>> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
>>>> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
>>>> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
>>>> arch/arm/boot/dts/dra7-evm.dts | 2 +-
>>>> arch/arm/boot/dts/dra7.dtsi | 43 +++--
>>>> arch/arm/boot/dts/dra72-evm.dts | 1 -
>>>> arch/arm/boot/dts/dra72x.dtsi | 3 +-
>>>> arch/arm/boot/dts/dra74x.dtsi | 5 +-
>>>> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
>>>> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
>>>> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
>>>> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
>>>> arch/arm/boot/dts/omap4.dtsi | 18 +-
>>>> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
>>>> arch/arm/boot/dts/omap5-uevm.dts | 2 -
>>>> arch/arm/boot/dts/omap5.dtsi | 26 ++-
>>>> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
>>>> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
>>>> arch/arm/mach-omap2/omap4-common.c | 27 +--
>>>> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
>>>> drivers/irqchip/irq-gic.c | 59 +-----
>>>> include/linux/irq.h | 1 +
>>>> include/linux/irqchip/arm-gic.h | 6 -
>>>> include/linux/irqchip/irq-crossbar.h | 11 --
>>>> kernel/irq/chip.c | 16 ++
>>>> 30 files changed, 376 insertions(+), 278 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
>>>> delete mode 100644 include/linux/irqchip/irq-crossbar.h
>>>
>>> For merging this, how about Marc sets up an immutable branch against
>>> v4.0-rc1 that both Jason and I can merge it in? Then Jason can
>>> send the pull request I can sort out the merge conflict issues.
>>
>> If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
>> I apply patches for irqchip. If there are any nits you'd like me to fix while
>> I'm applying, just let me know.
>
> That works for me thanks as long as it works for Marc.
Definitely works for me. I just want to get rid of these patches! ;-)
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4, 5}/DRA7 to use stacked domains
@ 2015-03-13 17:49 ` Marc Zyngier
0 siblings, 0 replies; 26+ messages in thread
From: Marc Zyngier @ 2015-03-13 17:49 UTC (permalink / raw)
To: linux-arm-kernel
On 13/03/15 17:38, Tony Lindgren wrote:
> * Jason Cooper <jason@lakedaemon.net> [150313 10:25]:
>> Hey Tony,
>>
>> On Fri, Mar 13, 2015 at 08:40:39AM -0700, Tony Lindgren wrote:
>>> * Marc Zyngier <marc.zyngier@arm.com> [150311 08:44]:
>>>> This series is extracted from [4], which is trying to remove all
>>>> traces of gic_arch_extn from the tree. As some maintainers are more
>>>> responsive than others (understatement of the year...), I've decided
>>>> to split it per sub-arch, and get it moving, at least partially.
>>>>
>>>> This series addresses OMAP{4,5} by converting the WUGEN to stacked
>>>> domains. The DRA7 crossbar gets the same treatment.
>>> ...
>>>>
>>>> Documentation/devicetree/bindings/arm/gic.txt | 6 -
>>>> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
>>>> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
>>>> arch/arm/boot/dts/am4372.dtsi | 11 +-
>>>> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
>>>> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
>>>> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
>>>> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
>>>> arch/arm/boot/dts/dra7-evm.dts | 2 +-
>>>> arch/arm/boot/dts/dra7.dtsi | 43 +++--
>>>> arch/arm/boot/dts/dra72-evm.dts | 1 -
>>>> arch/arm/boot/dts/dra72x.dtsi | 3 +-
>>>> arch/arm/boot/dts/dra74x.dtsi | 5 +-
>>>> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
>>>> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
>>>> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
>>>> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
>>>> arch/arm/boot/dts/omap4.dtsi | 18 +-
>>>> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
>>>> arch/arm/boot/dts/omap5-uevm.dts | 2 -
>>>> arch/arm/boot/dts/omap5.dtsi | 26 ++-
>>>> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
>>>> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
>>>> arch/arm/mach-omap2/omap4-common.c | 27 +--
>>>> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
>>>> drivers/irqchip/irq-gic.c | 59 +-----
>>>> include/linux/irq.h | 1 +
>>>> include/linux/irqchip/arm-gic.h | 6 -
>>>> include/linux/irqchip/irq-crossbar.h | 11 --
>>>> kernel/irq/chip.c | 16 ++
>>>> 30 files changed, 376 insertions(+), 278 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
>>>> delete mode 100644 include/linux/irqchip/irq-crossbar.h
>>>
>>> For merging this, how about Marc sets up an immutable branch against
>>> v4.0-rc1 that both Jason and I can merge it in? Then Jason can
>>> send the pull request I can sort out the merge conflict issues.
>>
>> If you don't mind, I'll create the branch. I tend to fixup some nitpicks when
>> I apply patches for irqchip. If there are any nits you'd like me to fix while
>> I'm applying, just let me know.
>
> That works for me thanks as long as it works for Marc.
Definitely works for me. I just want to get rid of these patches! ;-)
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
2015-03-11 15:43 ` Marc Zyngier
@ 2015-03-15 1:22 ` Jason Cooper
-1 siblings, 0 replies; 26+ messages in thread
From: Jason Cooper @ 2015-03-15 1:22 UTC (permalink / raw)
To: Marc Zyngier
Cc: Nishanth Menon, Mark Rutland, Tony Lindgren, Rob Herring,
Benoit Cousson, Santosh Shilimkar, Thomas Gleixner, linux-omap,
linux-arm-kernel
Marc,
On Wed, Mar 11, 2015 at 03:43:42PM +0000, Marc Zyngier wrote:
> This series is extracted from [4], which is trying to remove all
> traces of gic_arch_extn from the tree. As some maintainers are more
> responsive than others (understatement of the year...), I've decided
> to split it per sub-arch, and get it moving, at least partially.
>
> This series addresses OMAP{4,5} by converting the WUGEN to stacked
> domains. The DRA7 crossbar gets the same treatment.
>
> It is worth realizing that:
>
> - I haven't been able to test this as much as I would have wanted to
> (it's only been tested on omap4 and omap5).
>
> - This actively *breaks* existing setups. Once you boot a new kernel
> with an old DT, suspend/resume *will* be broken. Old kernels on a
> new DT won't even boot! You've been warned. This really outline the
> necessity of actually describing the HW in device trees...
>
> Based on 4.0-rc1.
>
> * From v5: [5]
> - Allow interrupt affinity to be changed
>
> * From v4: [4]
> - Extracted from the full series
> - Rebased on 4.0-rc1
>
> * From v3 [3]:
> - Rebased on top of the patch working around hardcoded IRQ on OMAP4/5 [4]
> - Fixed more iMX6 DTs (Stephan)
> - Fixed Exynos4/5 DTs
>
> * From v2 [2]:
> - Addressed numerous comments from Thierry
> - Merged bug fixes from Nishanth
> - Merged bug fix from Stefan
>
> * From v1 [1]:
> - Rebased on 3.19-rc3
> - Fixed a number of additional platforms
> - Added crossbar conversion to stacked domains
> - Merged bug fixes from Nishanth
>
> [5]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/325178.html
> [4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/317531.html
> [3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315385.html
> [2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314041.html
> [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307338.html
>
> Marc Zyngier (7):
> genirq: Add irqchip_set_wake_parent
> irqchip: crossbar: convert dra7 crossbar to stacked domains
> DT: update ti,irq-crossbar binding
> irqchip: GIC: get rid of routable domain
> DT: arm,gic: kill arm,routable-irqs
> DT: omap4/5: add binding for the wake-up generator
> ARM: omap: convert wakeupgen to stacked domains
>
> Documentation/devicetree/bindings/arm/gic.txt | 6 -
> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> arch/arm/boot/dts/am4372.dtsi | 11 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 2 +-
> arch/arm/boot/dts/dra7.dtsi | 43 +++--
> arch/arm/boot/dts/dra72-evm.dts | 1 -
> arch/arm/boot/dts/dra72x.dtsi | 3 +-
> arch/arm/boot/dts/dra74x.dtsi | 5 +-
> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> arch/arm/boot/dts/omap4.dtsi | 18 +-
> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> arch/arm/boot/dts/omap5-uevm.dts | 2 -
> arch/arm/boot/dts/omap5.dtsi | 26 ++-
> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> arch/arm/mach-omap2/omap4-common.c | 27 +--
> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> drivers/irqchip/irq-gic.c | 59 +-----
> include/linux/irq.h | 1 +
> include/linux/irqchip/arm-gic.h | 6 -
> include/linux/irqchip/irq-crossbar.h | 11 --
> kernel/irq/chip.c | 16 ++
> 30 files changed, 376 insertions(+), 278 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> delete mode 100644 include/linux/irqchip/irq-crossbar.h
Applied to irqchip/stacked-omap.
thx,
Jason.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
@ 2015-03-15 1:22 ` Jason Cooper
0 siblings, 0 replies; 26+ messages in thread
From: Jason Cooper @ 2015-03-15 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Marc,
On Wed, Mar 11, 2015 at 03:43:42PM +0000, Marc Zyngier wrote:
> This series is extracted from [4], which is trying to remove all
> traces of gic_arch_extn from the tree. As some maintainers are more
> responsive than others (understatement of the year...), I've decided
> to split it per sub-arch, and get it moving, at least partially.
>
> This series addresses OMAP{4,5} by converting the WUGEN to stacked
> domains. The DRA7 crossbar gets the same treatment.
>
> It is worth realizing that:
>
> - I haven't been able to test this as much as I would have wanted to
> (it's only been tested on omap4 and omap5).
>
> - This actively *breaks* existing setups. Once you boot a new kernel
> with an old DT, suspend/resume *will* be broken. Old kernels on a
> new DT won't even boot! You've been warned. This really outline the
> necessity of actually describing the HW in device trees...
>
> Based on 4.0-rc1.
>
> * From v5: [5]
> - Allow interrupt affinity to be changed
>
> * From v4: [4]
> - Extracted from the full series
> - Rebased on 4.0-rc1
>
> * From v3 [3]:
> - Rebased on top of the patch working around hardcoded IRQ on OMAP4/5 [4]
> - Fixed more iMX6 DTs (Stephan)
> - Fixed Exynos4/5 DTs
>
> * From v2 [2]:
> - Addressed numerous comments from Thierry
> - Merged bug fixes from Nishanth
> - Merged bug fix from Stefan
>
> * From v1 [1]:
> - Rebased on 3.19-rc3
> - Fixed a number of additional platforms
> - Added crossbar conversion to stacked domains
> - Merged bug fixes from Nishanth
>
> [5]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/325178.html
> [4]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/317531.html
> [3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315385.html
> [2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314041.html
> [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/307338.html
>
> Marc Zyngier (7):
> genirq: Add irqchip_set_wake_parent
> irqchip: crossbar: convert dra7 crossbar to stacked domains
> DT: update ti,irq-crossbar binding
> irqchip: GIC: get rid of routable domain
> DT: arm,gic: kill arm,routable-irqs
> DT: omap4/5: add binding for the wake-up generator
> ARM: omap: convert wakeupgen to stacked domains
>
> Documentation/devicetree/bindings/arm/gic.txt | 6 -
> .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> .../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++
> arch/arm/boot/dts/am4372.dtsi | 11 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 1 -
> arch/arm/boot/dts/am437x-sk-evm.dts | 1 -
> arch/arm/boot/dts/am43x-epos-evm.dts | 1 -
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 2 +-
> arch/arm/boot/dts/dra7.dtsi | 43 +++--
> arch/arm/boot/dts/dra72-evm.dts | 1 -
> arch/arm/boot/dts/dra72x.dtsi | 3 +-
> arch/arm/boot/dts/dra74x.dtsi | 5 +-
> arch/arm/boot/dts/omap4-duovero.dtsi | 2 -
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4-sdp.dts | 8 +-
> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 -
> arch/arm/boot/dts/omap4.dtsi | 18 +-
> arch/arm/boot/dts/omap5-cm-t54.dts | 1 -
> arch/arm/boot/dts/omap5-uevm.dts | 2 -
> arch/arm/boot/dts/omap5.dtsi | 26 ++-
> arch/arm/mach-omap2/omap-wakeupgen.c | 128 ++++++++++---
> arch/arm/mach-omap2/omap-wakeupgen.h | 1 -
> arch/arm/mach-omap2/omap4-common.c | 27 +--
> drivers/irqchip/irq-crossbar.c | 210 ++++++++++++---------
> drivers/irqchip/irq-gic.c | 59 +-----
> include/linux/irq.h | 1 +
> include/linux/irqchip/arm-gic.h | 6 -
> include/linux/irqchip/irq-crossbar.h | 11 --
> kernel/irq/chip.c | 16 ++
> 30 files changed, 376 insertions(+), 278 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> delete mode 100644 include/linux/irqchip/irq-crossbar.h
Applied to irqchip/stacked-omap.
thx,
Jason.
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2015-03-15 1:22 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-11 15:43 [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 1/7] genirq: Add irqchip_set_wake_parent Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 3/7] DT: update ti,irq-crossbar binding Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 4/7] irqchip: GIC: get rid of routable domain Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 5/7] DT: arm,gic: kill arm,routable-irqs Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 6/7] DT: omap4/5: add binding for the wake-up generator Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 7/7] ARM: omap: convert wakeupgen to stacked domains Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier
2015-03-13 15:40 ` [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use " Tony Lindgren
2015-03-13 15:40 ` Tony Lindgren
2015-03-13 17:25 ` Jason Cooper
2015-03-13 17:25 ` Jason Cooper
2015-03-13 17:38 ` Tony Lindgren
2015-03-13 17:38 ` Tony Lindgren
2015-03-13 17:49 ` Marc Zyngier
2015-03-13 17:49 ` [PATCH v6 0/7] irqchip: Move OMAP{4, 5}/DRA7 " Marc Zyngier
2015-03-15 1:22 ` [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 " Jason Cooper
2015-03-15 1:22 ` Jason Cooper
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.