All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Wim Van Sebroeck <wim@iguana.be>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-watchdog@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v5 03/10] watchdog: at91rm9200: use the system timer syscon
Date: Thu, 12 Mar 2015 13:07:27 +0100	[thread overview]
Message-ID: <1426162054-9987-4-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1426162054-9987-1-git-send-email-alexandre.belloni@free-electrons.com>

Use a syscon regmap to access the system timer registers.

Also, rename the driver atmel_st_watchdog to stop conflicting with
at91sam9_wdt.c

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/watchdog/Kconfig          |  2 +-
 drivers/watchdog/at91rm9200_wdt.c | 29 ++++++++++++++++++++++-------
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 16f202350997..ce4f3a7f95fd 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
-	depends on SOC_AT91RM9200
+	depends on SOC_AT91RM9200 && MFD_SYSCON
 	help
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index d244112d5b6f..e6fa87d85de3 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -17,22 +17,25 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
 
 static int wdt_time = WDT_DEFAULT_TIME;
 static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
 
 module_param(wdt_time, int, 0);
 MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -55,7 +58,7 @@ static unsigned long at91wdt_busy;
  */
 static inline void at91_wdt_stop(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
 }
 
 /*
@@ -63,9 +66,9 @@ static inline void at91_wdt_stop(void)
  */
 static inline void at91_wdt_start(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
 				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
@@ -73,7 +76,7 @@ static inline void at91_wdt_start(void)
  */
 static inline void at91_wdt_reload(void)
 {
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* ......................................................................... */
@@ -203,12 +206,24 @@ static struct miscdevice at91wdt_miscdev = {
 
 static int at91wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device *parent;
 	int res;
 
 	if (at91wdt_miscdev.parent)
 		return -EBUSY;
 	at91wdt_miscdev.parent = &pdev->dev;
 
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (!regmap_st)
+		return -ENODEV;
+
 	res = misc_register(&at91wdt_miscdev);
 	if (res)
 		return res;
@@ -267,7 +282,7 @@ static struct platform_driver at91wdt_driver = {
 	.suspend	= at91wdt_suspend,
 	.resume		= at91wdt_resume,
 	.driver		= {
-		.name	= "at91_wdt",
+		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
 	},
 };
@@ -296,4 +311,4 @@ module_exit(at91_wdt_exit);
 MODULE_AUTHOR("Andrew Victor");
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");
-- 
2.1.0


WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 03/10] watchdog: at91rm9200: use the system timer syscon
Date: Thu, 12 Mar 2015 13:07:27 +0100	[thread overview]
Message-ID: <1426162054-9987-4-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1426162054-9987-1-git-send-email-alexandre.belloni@free-electrons.com>

Use a syscon regmap to access the system timer registers.

Also, rename the driver atmel_st_watchdog to stop conflicting with
at91sam9_wdt.c

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/watchdog/Kconfig          |  2 +-
 drivers/watchdog/at91rm9200_wdt.c | 29 ++++++++++++++++++++++-------
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 16f202350997..ce4f3a7f95fd 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
-	depends on SOC_AT91RM9200
+	depends on SOC_AT91RM9200 && MFD_SYSCON
 	help
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index d244112d5b6f..e6fa87d85de3 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -17,22 +17,25 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
 
 static int wdt_time = WDT_DEFAULT_TIME;
 static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
 
 module_param(wdt_time, int, 0);
 MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -55,7 +58,7 @@ static unsigned long at91wdt_busy;
  */
 static inline void at91_wdt_stop(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
 }
 
 /*
@@ -63,9 +66,9 @@ static inline void at91_wdt_stop(void)
  */
 static inline void at91_wdt_start(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
 				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
@@ -73,7 +76,7 @@ static inline void at91_wdt_start(void)
  */
 static inline void at91_wdt_reload(void)
 {
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* ......................................................................... */
@@ -203,12 +206,24 @@ static struct miscdevice at91wdt_miscdev = {
 
 static int at91wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device *parent;
 	int res;
 
 	if (at91wdt_miscdev.parent)
 		return -EBUSY;
 	at91wdt_miscdev.parent = &pdev->dev;
 
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (!regmap_st)
+		return -ENODEV;
+
 	res = misc_register(&at91wdt_miscdev);
 	if (res)
 		return res;
@@ -267,7 +282,7 @@ static struct platform_driver at91wdt_driver = {
 	.suspend	= at91wdt_suspend,
 	.resume		= at91wdt_resume,
 	.driver		= {
-		.name	= "at91_wdt",
+		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
 	},
 };
@@ -296,4 +311,4 @@ module_exit(at91_wdt_exit);
 MODULE_AUTHOR("Andrew Victor");
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");
-- 
2.1.0

  parent reply	other threads:[~2015-03-12 12:11 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 12:07 [PATCH v5 00/10] Atmel System Timer cleanups Alexandre Belloni
2015-03-12 12:07 ` Alexandre Belloni
2015-03-12 12:07 ` [PATCH v5 01/10] ARM: at91/dt: declare atmel,at91rm9200-st as a syscon Alexandre Belloni
2015-03-12 12:07   ` [PATCH v5 01/10] ARM: at91/dt: declare atmel, at91rm9200-st " Alexandre Belloni
2015-03-12 12:07 ` [PATCH v5 02/10] mfd: syscon: Add atmel system timer registers definition Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-13  8:03   ` Lee Jones
2015-03-13  8:03     ` Lee Jones
2015-03-13  8:03     ` Lee Jones
2015-03-13 10:40     ` Alexandre Belloni
2015-03-13 10:40       ` Alexandre Belloni
2015-03-13 16:52       ` Nicolas Ferre
2015-03-13 16:52         ` Nicolas Ferre
2015-03-13 16:52         ` Nicolas Ferre
2015-03-16  8:17         ` Lee Jones
2015-03-16  8:17           ` Lee Jones
2015-03-16  8:17           ` Lee Jones
2015-03-12 12:07 ` Alexandre Belloni [this message]
2015-03-12 12:07   ` [PATCH v5 03/10] watchdog: at91rm9200: use the system timer syscon Alexandre Belloni
2015-03-12 16:19   ` Guenter Roeck
2015-03-12 16:19     ` Guenter Roeck
2015-03-12 12:07 ` [PATCH v5 04/10] watchdog: at91rm9200: implement restart handler Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-12 16:22   ` Guenter Roeck
2015-03-12 16:22     ` Guenter Roeck
2015-03-12 12:07 ` [PATCH v5 05/10] ARM: at91: at91rm9200: remove deprecated arm_pm_restart Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-12 12:07 ` [PATCH v5 06/10] ARM: at91: properly initialize timer Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-12 12:07 ` [PATCH v5 07/10] ARM: at91: time: move the system timer driver to drivers/clocksource Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-13 10:14   ` Daniel Lezcano
2015-03-13 10:14     ` Daniel Lezcano
2015-03-13 10:14     ` Daniel Lezcano
2015-03-12 12:07 ` [PATCH v5 08/10] clocksource: atmel-st: use syscon/regmap Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-13 10:17   ` Daniel Lezcano
2015-03-13 10:17     ` Daniel Lezcano
2015-03-13 10:17     ` Daniel Lezcano
2015-03-12 12:07 ` [PATCH v5 09/10] clocksource: atmel-st: remove mach/hardware dependency Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-13 10:21   ` Daniel Lezcano
2015-03-13 10:21     ` Daniel Lezcano
2015-03-13 10:21     ` Daniel Lezcano
2015-03-13 10:44     ` Alexandre Belloni
2015-03-13 10:44       ` Alexandre Belloni
2015-03-13 10:54   ` [PATCH v6 " Alexandre Belloni
2015-03-13 10:54     ` Alexandre Belloni
2015-03-12 12:07 ` [PATCH v5 10/10] ARM: at91: remove useless include Alexandre Belloni
2015-03-12 12:07   ` Alexandre Belloni
2015-03-13 10:22   ` Daniel Lezcano
2015-03-13 10:22     ` Daniel Lezcano
2015-03-13 10:22     ` Daniel Lezcano
2015-03-12 14:04 ` [PATCH v5 00/10] Atmel System Timer cleanups Nicolas Ferre
2015-03-12 14:04   ` Nicolas Ferre
2015-03-12 14:04   ` Nicolas Ferre
2015-03-13 10:23 ` Daniel Lezcano
2015-03-13 10:23   ` Daniel Lezcano
2015-03-13 10:23   ` Daniel Lezcano
2015-03-13 10:33   ` Alexandre Belloni
2015-03-13 10:33     ` Alexandre Belloni
2015-03-13 10:33     ` Daniel Lezcano
2015-03-13 10:33       ` Daniel Lezcano
2015-03-13 10:33       ` Daniel Lezcano
2015-03-13 16:36       ` Nicolas Ferre
2015-03-13 16:36         ` Nicolas Ferre
2015-03-13 16:36         ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426162054-9987-4-git-send-email-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=nicolas.ferre@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.