From: Sujith Manoharan <sujith@msujith.org> To: linux-wireless@vger.kernel.org Cc: ath9k-devel@lists.ath9k.org Subject: [PATCH 2/4] ath9k: Handle MCI_STATE_AIC_START Date: Fri, 13 Mar 2015 09:13:08 +0530 [thread overview] Message-ID: <1426218190-19888-3-git-send-email-sujith@msujith.org> (raw) In-Reply-To: <1426218190-19888-1-git-send-email-sujith@msujith.org> From: Sujith Manoharan <c_manoha@qca.qualcomm.com> This patch adds a function to handle the MCI message MCI_STATE_AIC_START. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/ar9003_aic.c | 33 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 + drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++ 3 files changed, 38 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c index 4e8cf08..5b4f818 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c @@ -18,6 +18,7 @@ #include "hw-ops.h" #include "ar9003_mci.h" #include "ar9003_aic.h" +#include "ar9003_phy.h" #include "reg_aic.h" static const u8 com_att_db_table[ATH_AIC_MAX_COM_ATT_DB_TABLE] = { @@ -512,6 +513,38 @@ exit: } +u8 ar9003_aic_start_normal(struct ath_hw *ah) +{ + struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic; + int16_t i; + + if (aic->aic_cal_state != AIC_CAL_STATE_DONE) + return 1; + + ar9003_aic_gain_table(ah); + + REG_WRITE(ah, AR_PHY_AIC_SRAM_ADDR_B1, ATH_AIC_SRAM_AUTO_INCREMENT); + + for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) { + REG_WRITE(ah, AR_PHY_AIC_SRAM_DATA_B1, aic->aic_sram[i]); + } + + /* FIXME: Replace these with proper register names */ + REG_WRITE(ah, 0xa6b0, 0x80); + REG_WRITE(ah, 0xa6b4, 0x5b2df0); + REG_WRITE(ah, 0xa6b8, 0x10762cc8); + REG_WRITE(ah, 0xa6bc, 0x1219a4b); + REG_WRITE(ah, 0xa6c0, 0x1e01); + REG_WRITE(ah, 0xb6b4, 0xf0); + REG_WRITE(ah, 0xb6c0, 0x1e01); + REG_WRITE(ah, 0xb6b0, 0x81); + REG_WRITE(ah, AR_PHY_65NM_CH1_RXTX4, 0x40000000); + + aic->aic_enabled = true; + + return 0; +} + u8 ar9003_aic_cal_reset(struct ath_hw *ah) { struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h index 5e48710..1ee5a8c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h @@ -53,6 +53,7 @@ struct ath_aic_out_info { struct ath_aic_sram_info sram; }; +u8 ar9003_aic_start_normal(struct ath_hw *ah); u8 ar9003_aic_cal_reset(struct ath_hw *ah); u8 ar9003_aic_calibration_single(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index d6ed628..b559d75 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type) value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0; mci->need_flush_btinfo = false; break; + case MCI_STATE_AIC_START: + if (ath9k_hw_is_aic_enabled(ah)) + ar9003_aic_start_normal(ah); + break; case MCI_STATE_AIC_CAL_RESET: if (ath9k_hw_is_aic_enabled(ah)) value = ar9003_aic_cal_reset(ah); -- 2.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Sujith Manoharan <sujith@msujith.org> To: ath9k-devel@lists.ath9k.org Subject: [ath9k-devel] [PATCH 2/4] ath9k: Handle MCI_STATE_AIC_START Date: Fri, 13 Mar 2015 09:13:08 +0530 [thread overview] Message-ID: <1426218190-19888-3-git-send-email-sujith@msujith.org> (raw) In-Reply-To: <1426218190-19888-1-git-send-email-sujith@msujith.org> From: Sujith Manoharan <c_manoha@qca.qualcomm.com> This patch adds a function to handle the MCI message MCI_STATE_AIC_START. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/ar9003_aic.c | 33 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 + drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++ 3 files changed, 38 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c index 4e8cf08..5b4f818 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c @@ -18,6 +18,7 @@ #include "hw-ops.h" #include "ar9003_mci.h" #include "ar9003_aic.h" +#include "ar9003_phy.h" #include "reg_aic.h" static const u8 com_att_db_table[ATH_AIC_MAX_COM_ATT_DB_TABLE] = { @@ -512,6 +513,38 @@ exit: } +u8 ar9003_aic_start_normal(struct ath_hw *ah) +{ + struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic; + int16_t i; + + if (aic->aic_cal_state != AIC_CAL_STATE_DONE) + return 1; + + ar9003_aic_gain_table(ah); + + REG_WRITE(ah, AR_PHY_AIC_SRAM_ADDR_B1, ATH_AIC_SRAM_AUTO_INCREMENT); + + for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) { + REG_WRITE(ah, AR_PHY_AIC_SRAM_DATA_B1, aic->aic_sram[i]); + } + + /* FIXME: Replace these with proper register names */ + REG_WRITE(ah, 0xa6b0, 0x80); + REG_WRITE(ah, 0xa6b4, 0x5b2df0); + REG_WRITE(ah, 0xa6b8, 0x10762cc8); + REG_WRITE(ah, 0xa6bc, 0x1219a4b); + REG_WRITE(ah, 0xa6c0, 0x1e01); + REG_WRITE(ah, 0xb6b4, 0xf0); + REG_WRITE(ah, 0xb6c0, 0x1e01); + REG_WRITE(ah, 0xb6b0, 0x81); + REG_WRITE(ah, AR_PHY_65NM_CH1_RXTX4, 0x40000000); + + aic->aic_enabled = true; + + return 0; +} + u8 ar9003_aic_cal_reset(struct ath_hw *ah) { struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h index 5e48710..1ee5a8c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h @@ -53,6 +53,7 @@ struct ath_aic_out_info { struct ath_aic_sram_info sram; }; +u8 ar9003_aic_start_normal(struct ath_hw *ah); u8 ar9003_aic_cal_reset(struct ath_hw *ah); u8 ar9003_aic_calibration_single(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index d6ed628..b559d75 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type) value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0; mci->need_flush_btinfo = false; break; + case MCI_STATE_AIC_START: + if (ath9k_hw_is_aic_enabled(ah)) + ar9003_aic_start_normal(ah); + break; case MCI_STATE_AIC_CAL_RESET: if (ath9k_hw_is_aic_enabled(ah)) value = ar9003_aic_cal_reset(ah); -- 2.3.1
next prev parent reply other threads:[~2015-03-13 3:39 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-03-13 3:43 [PATCH 0/4] ath9k patches Sujith Manoharan 2015-03-13 3:43 ` [ath9k-devel] " Sujith Manoharan 2015-03-13 3:43 ` [PATCH 1/4] ath9k: Handle MCI_STATE_AIC_CAL_RESET Sujith Manoharan 2015-03-13 3:43 ` [ath9k-devel] " Sujith Manoharan 2015-03-13 3:43 ` Sujith Manoharan [this message] 2015-03-13 3:43 ` [ath9k-devel] [PATCH 2/4] ath9k: Handle MCI_STATE_AIC_START Sujith Manoharan 2015-03-13 3:43 ` [PATCH 3/4] ath9k: Handle MCI_STATE_AIC_CAL Sujith Manoharan 2015-03-13 3:43 ` [ath9k-devel] " Sujith Manoharan 2015-03-13 3:43 ` [PATCH 4/4] ath9k: Start AIC calibration during MCI reset Sujith Manoharan 2015-03-13 3:43 ` [ath9k-devel] " Sujith Manoharan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1426218190-19888-3-git-send-email-sujith@msujith.org \ --to=sujith@msujith.org \ --cc=ath9k-devel@lists.ath9k.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.