* linux panic on 4.0.0-rc4
@ 2015-03-16 5:11 Pranith Kumar
2015-03-16 5:34 ` Pranith Kumar
0 siblings, 1 reply; 24+ messages in thread
From: Pranith Kumar @ 2015-03-16 5:11 UTC (permalink / raw)
To: open list:LINUX FOR POWERPC..., LKML
Hello,
I have a power mac mini 32-bit system.
I am getting a kernel panic with the latest rc kernel. The last kernel
which worked on this which I remember booting was 3.19-rc5.
You can see the panic message here: http://imgur.com/s1lH15g. (there
is no log and I have no serial console).
Let me know if you need any more information. Config follows:
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 4.0.0-rc4 Kernel Configuration
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
# CONFIG_PPC_DOORBELL is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_PPC32=y
CONFIG_32BIT=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_MMU=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
# CONFIG_GENERIC_CSUM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_EMULATE_SSTEP=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_XICS is not set
# CONFIG_PPC_ICP_NATIVE is not set
# CONFIG_PPC_ICP_HV is not set
# CONFIG_PPC_ICS_RTAS is not set
# CONFIG_GE_FPGA is not set
#
# Platform support
#
CONFIG_PPC_CHRP=y
# CONFIG_PPC_MPC512x is not set
CONFIG_PPC_MPC52xx=y
# CONFIG_PPC_MPC5200_SIMPLE is not set
CONFIG_PPC_EFIKA=y
# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
# CONFIG_KVM_GUEST is not set
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_P7_NAP is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_CPU_FREQ_PMAC=y
#
# CPUIdle driver
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# POWERPC CPU Idle Drivers
#
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_PPC601_SYNC_FIX=y
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_RCU_GUP=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZSWAP is not set
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_PPC_4K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PPC_COPRO_BASE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
#
# PCI host controller drivers
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
# CONFIG_NONSTATIC_KERNEL is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
# CONFIG_ARCH_RANDOM is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_REGMAP_MMIO=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_FENCE_TRACE=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_FIREWIRE_NET is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
# CONFIG_PMAC_APM_EMU is not set
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
CONFIG_ADB_MACIO=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_WINDTUNNEL is not set
# CONFIG_THERM_ADT746X is not set
# CONFIG_WINDFARM is not set
# CONFIG_ANSLCD is not set
# CONFIG_PMAC_RACKMETER is not set
# CONFIG_SENSORS_AMS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_APPLE=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
CONFIG_FM10K=y
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MV643XX_ETH is not set
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_RTAS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_HYDRA=m
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=m
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_MPC52xx is not set
# CONFIG_SPI_MPC52xx_PSC is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_MPC5200=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_UMS=y
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
# CONFIG_SND_AOA is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
CONFIG_SND_SOC=m
CONFIG_SND_ATMEL_SOC=m
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_SSI=m
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_POWERPC_SOC is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_HDMI_CODEC is not set
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1792A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC3X is not set
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804 is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_PPC_BESTCOMM is not set
# CONFIG_FSL_EDMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_COMEDI is not set
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_FB_XGI is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_FB_TFT is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_QCOM is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_PPC is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_VIRTUALIZATION is not set
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 5:11 linux panic on 4.0.0-rc4 Pranith Kumar
@ 2015-03-16 5:34 ` Pranith Kumar
2015-03-16 8:16 ` Michael Ellerman
0 siblings, 1 reply; 24+ messages in thread
From: Pranith Kumar @ 2015-03-16 5:34 UTC (permalink / raw)
To: open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 1:11 AM, Pranith Kumar <bobby.prani@gmail.com> wrote:
> Hello,
>
> I have a power mac mini 32-bit system.
>
...
> You can see the panic message here: http://imgur.com/s1lH15g. (there
> is no log and I have no serial console).
There was some debug code in there when it hit. The actual hang seems
to be in printk_late_init(). It does not return from this. May be this
is a hint?
Please let me know if you need more information to debug this.
Thanks!
>
> Let me know if you need any more information. Config follows:
>
> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/powerpc 4.0.0-rc4 Kernel Configuration
> #
> # CONFIG_PPC64 is not set
>
> #
> # Processor support
> #
> CONFIG_PPC_BOOK3S_32=y
> # CONFIG_PPC_85xx is not set
> # CONFIG_PPC_8xx is not set
> # CONFIG_40x is not set
> # CONFIG_44x is not set
> # CONFIG_E200 is not set
> CONFIG_PPC_BOOK3S=y
> CONFIG_6xx=y
> CONFIG_PPC_FPU=y
> CONFIG_ALTIVEC=y
> CONFIG_PPC_STD_MMU=y
> CONFIG_PPC_STD_MMU_32=y
> # CONFIG_PPC_MM_SLICES is not set
> CONFIG_PPC_HAVE_PMU_SUPPORT=y
> CONFIG_PPC_PERF_CTRS=y
> # CONFIG_SMP is not set
> # CONFIG_PPC_DOORBELL is not set
> CONFIG_CPU_BIG_ENDIAN=y
> # CONFIG_CPU_LITTLE_ENDIAN is not set
> CONFIG_PPC32=y
> CONFIG_32BIT=y
> CONFIG_WORD_SIZE=32
> # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
> # CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
> CONFIG_MMU=y
> # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
> # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
> CONFIG_NR_IRQS=512
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_ARCH_HAS_ILOG2_U32=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_PPC=y
> # CONFIG_GENERIC_CSUM is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_PANIC_TIMEOUT=0
> CONFIG_GENERIC_NVRAM=y
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_PPC_OF=y
> CONFIG_PPC_UDBG_16550=y
> # CONFIG_GENERIC_TBSYNC is not set
> CONFIG_AUDIT_ARCH=y
> CONFIG_GENERIC_BUG=y
> # CONFIG_EPAPR_BOOT is not set
> # CONFIG_DEFAULT_UIMAGE is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> # CONFIG_PPC_DCR_NATIVE is not set
> # CONFIG_PPC_DCR_MMIO is not set
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_PPC_EMULATE_SSTEP=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_IRQ_WORK=y
>
> #
> # General setup
> #
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> # CONFIG_COMPILE_TEST is not set
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_CROSS_MEMORY_ATTACH=y
> CONFIG_FHANDLE=y
> CONFIG_USELIB=y
> CONFIG_AUDIT=y
> CONFIG_HAVE_ARCH_AUDITSYSCALL=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_WATCH=y
> CONFIG_AUDIT_TREE=y
>
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
> CONFIG_IRQ_DOMAIN=y
> CONFIG_GENERIC_MSI_IRQ=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_GENERIC_CMOS_UPDATE=y
>
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ_COMMON=y
> # CONFIG_HZ_PERIODIC is not set
> CONFIG_NO_HZ_IDLE=y
> # CONFIG_NO_HZ is not set
> CONFIG_HIGH_RES_TIMERS=y
>
> #
> # CPU/Task time and stats accounting
> #
> CONFIG_TICK_CPU_ACCOUNTING=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_BSD_PROCESS_ACCT_V3=y
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
>
> #
> # RCU Subsystem
> #
> CONFIG_TINY_RCU=y
> CONFIG_SRCU=y
> CONFIG_TASKS_RCU=y
> # CONFIG_RCU_STALL_COMMON is not set
> # CONFIG_TREE_RCU_TRACE is not set
> CONFIG_RCU_KTHREAD_PRIO=0
> CONFIG_BUILD_BIN2C=y
> CONFIG_IKCONFIG=m
> # CONFIG_IKCONFIG_PROC is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_CGROUP_FREEZER=y
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_PAGE_COUNTER=y
> CONFIG_MEMCG=y
> CONFIG_MEMCG_SWAP=y
> # CONFIG_MEMCG_SWAP_ENABLED is not set
> CONFIG_CGROUP_PERF=y
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> # CONFIG_CFS_BANDWIDTH is not set
> # CONFIG_RT_GROUP_SCHED is not set
> CONFIG_BLK_CGROUP=y
> # CONFIG_DEBUG_BLK_CGROUP is not set
> CONFIG_CHECKPOINT_RESTORE=y
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> CONFIG_NET_NS=y
> CONFIG_SCHED_AUTOGROUP=y
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_RD_LZ4=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> CONFIG_BPF=y
> CONFIG_EXPERT=y
> CONFIG_SGETMASK_SYSCALL=y
> CONFIG_SYSFS_SYSCALL=y
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_BPF_SYSCALL=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_ADVISE_SYSCALLS=y
> CONFIG_PCI_QUIRKS=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
>
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_COMPAT_BRK=y
> # CONFIG_SLAB is not set
> # CONFIG_SLUB is not set
> CONFIG_SLOB=y
> CONFIG_PROFILING=y
> # CONFIG_OPROFILE is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_JUMP_LABEL=y
> # CONFIG_UPROBES is not set
> # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_CLK=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
> # CONFIG_CC_STACKPROTECTOR is not set
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_MODULES_USE_ELF_RELA=y
> CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
> CONFIG_CLONE_BACKWARDS=y
> CONFIG_OLD_SIGSUSPEND=y
> CONFIG_OLD_SIGACTION=y
>
> #
> # GCOV-based kernel profiling
> #
> CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> # CONFIG_MODULE_SIG is not set
> # CONFIG_MODULE_COMPRESS is not set
> CONFIG_BLOCK=y
> CONFIG_LBDAF=y
> CONFIG_BLK_DEV_BSG=y
> CONFIG_BLK_DEV_BSGLIB=y
> CONFIG_BLK_DEV_INTEGRITY=y
> CONFIG_BLK_DEV_THROTTLING=y
> # CONFIG_BLK_CMDLINE_PARSER is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_AIX_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_BSD_DISKLABEL is not set
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> # CONFIG_CMDLINE_PARTITION is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> CONFIG_CFQ_GROUP_IOSCHED=y
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> CONFIG_INLINE_READ_UNLOCK=y
> CONFIG_INLINE_READ_UNLOCK_IRQ=y
> CONFIG_INLINE_WRITE_UNLOCK=y
> CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
> CONFIG_FREEZER=y
> CONFIG_PPC_MSI_BITMAP=y
> # CONFIG_PPC_XICS is not set
> # CONFIG_PPC_ICP_NATIVE is not set
> # CONFIG_PPC_ICP_HV is not set
> # CONFIG_PPC_ICS_RTAS is not set
> # CONFIG_GE_FPGA is not set
>
> #
> # Platform support
> #
> CONFIG_PPC_CHRP=y
> # CONFIG_PPC_MPC512x is not set
> CONFIG_PPC_MPC52xx=y
> # CONFIG_PPC_MPC5200_SIMPLE is not set
> CONFIG_PPC_EFIKA=y
> # CONFIG_PPC_LITE5200 is not set
> # CONFIG_PPC_MEDIA5200 is not set
> CONFIG_PPC_MPC5200_BUGFIX=y
> CONFIG_PPC_PMAC=y
> # CONFIG_PPC_CELL is not set
> # CONFIG_PPC_CELL_NATIVE is not set
> # CONFIG_PPC_82xx is not set
> # CONFIG_PQ2ADS is not set
> # CONFIG_PPC_83xx is not set
> # CONFIG_PPC_86xx is not set
> # CONFIG_EMBEDDED6xx is not set
> # CONFIG_AMIGAONE is not set
> # CONFIG_KVM_GUEST is not set
> CONFIG_EPAPR_PARAVIRT=y
> CONFIG_PPC_NATIVE=y
> CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
> # CONFIG_UDBG_RTAS_CONSOLE is not set
> # CONFIG_IPIC is not set
> CONFIG_MPIC=y
> # CONFIG_PPC_EPAPR_HV_PIC is not set
> # CONFIG_MPIC_WEIRD is not set
> # CONFIG_MPIC_MSGR is not set
> CONFIG_PPC_I8259=y
> CONFIG_PPC_RTAS=y
> CONFIG_RTAS_ERROR_LOGGING=y
> CONFIG_PPC_RTAS_DAEMON=y
> CONFIG_RTAS_PROC=y
> # CONFIG_MMIO_NVRAM is not set
> # CONFIG_MPIC_U3_HT_IRQS is not set
> CONFIG_PPC_MPC106=y
> # CONFIG_PPC_970_NAP is not set
> # CONFIG_PPC_P7_NAP is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> # CONFIG_CPU_FREQ_STAT is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
>
> #
> # CPU frequency scaling drivers
> #
> # CONFIG_CPUFREQ_DT is not set
> CONFIG_CPU_FREQ_PMAC=y
>
> #
> # CPUIdle driver
> #
>
> #
> # CPU Idle
> #
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
>
> #
> # POWERPC CPU Idle Drivers
> #
> # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> CONFIG_PPC601_SYNC_FIX=y
> CONFIG_TAU=y
> # CONFIG_TAU_INT is not set
> # CONFIG_TAU_AVERAGE is not set
> # CONFIG_FSL_ULI1575 is not set
> CONFIG_SIMPLE_GPIO=y
>
> #
> # Kernel options
> #
> CONFIG_HIGHMEM=y
> CONFIG_HZ_100=y
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=100
> CONFIG_SCHED_HRTICK=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_BINFMT_ELF=y
> CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
> CONFIG_BINFMT_SCRIPT=y
> # CONFIG_HAVE_AOUT is not set
> # CONFIG_BINFMT_MISC is not set
> CONFIG_COREDUMP=y
> # CONFIG_IOMMU_HELPER is not set
> # CONFIG_SWIOTLB is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_HAS_WALK_MEMORY=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> CONFIG_KEXEC=y
> # CONFIG_CRASH_DUMP is not set
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> CONFIG_HAVE_GENERIC_RCU_GUP=y
> CONFIG_NO_BOOTMEM=y
> CONFIG_MEMORY_ISOLATION=y
> # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_COMPACTION=y
> CONFIG_MIGRATION=y
> # CONFIG_PHYS_ADDR_T_64BIT is not set
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_NEED_PER_CPU_KM=y
> CONFIG_CLEANCACHE=y
> CONFIG_FRONTSWAP=y
> CONFIG_CMA=y
> # CONFIG_CMA_DEBUG is not set
> CONFIG_CMA_AREAS=7
> # CONFIG_ZSWAP is not set
> CONFIG_ZPOOL=y
> # CONFIG_ZBUD is not set
> CONFIG_ZSMALLOC=y
> CONFIG_PGTABLE_MAPPING=y
> # CONFIG_ZSMALLOC_STAT is not set
> CONFIG_PPC_4K_PAGES=y
> CONFIG_FORCE_MAX_ZONEORDER=11
> # CONFIG_PPC_COPRO_BASE is not set
> CONFIG_CMDLINE_BOOL=y
> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
> # CONFIG_CMDLINE_FORCE is not set
> CONFIG_EXTRA_TARGETS=""
> CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATE_CALLBACKS=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_PM_SLEEP=y
> # CONFIG_PM_AUTOSLEEP is not set
> # CONFIG_PM_WAKELOCKS is not set
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_PM_CLK=y
> # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
> # CONFIG_SECCOMP is not set
> CONFIG_ISA_DMA_API=y
>
> #
> # Bus options
> #
> # CONFIG_ISA is not set
> CONFIG_ZONE_DMA=y
> # CONFIG_NEED_DMA_MAP_STATE is not set
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_PPC_INDIRECT_PCI=y
> CONFIG_PPC_PCI_CHOICE=y
> CONFIG_PCI=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_PCI_SYSCALL=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCIEAER=y
> # CONFIG_PCIE_ECRC is not set
> # CONFIG_PCIEAER_INJECT is not set
> CONFIG_PCIEASPM=y
> # CONFIG_PCIEASPM_DEBUG is not set
> CONFIG_PCIEASPM_DEFAULT=y
> # CONFIG_PCIEASPM_POWERSAVE is not set
> # CONFIG_PCIEASPM_PERFORMANCE is not set
> CONFIG_PCIE_PME=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_DEBUG is not set
> CONFIG_PCI_REALLOC_ENABLE_AUTO=y
> # CONFIG_PCI_STUB is not set
> CONFIG_PCI_ATS=y
> CONFIG_PCI_IOV=y
> # CONFIG_PCI_PRI is not set
> # CONFIG_PCI_PASID is not set
>
> #
> # PCI host controller drivers
> #
> # CONFIG_PCCARD is not set
> # CONFIG_HOTPLUG_PCI is not set
> # CONFIG_HAS_RAPIDIO is not set
> # CONFIG_RAPIDIO is not set
> # CONFIG_NONSTATIC_KERNEL is not set
>
> #
> # Advanced setup
> #
> # CONFIG_ADVANCED_OPTIONS is not set
>
> #
> # Default settings for advanced configuration options are used
> #
> CONFIG_LOWMEM_SIZE=0x30000000
> CONFIG_PAGE_OFFSET=0xc0000000
> CONFIG_KERNEL_START=0xc0000000
> CONFIG_PHYSICAL_START=0x00000000
> CONFIG_TASK_SIZE=0xc0000000
> # CONFIG_ARCH_RANDOM is not set
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_DIAG is not set
> CONFIG_UNIX=y
> # CONFIG_UNIX_DIAG is not set
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> CONFIG_XFRM_SUB_POLICY=y
> CONFIG_XFRM_MIGRATE=y
> # CONFIG_XFRM_STATISTICS is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_FIB_TRIE_STATS=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE_DEMUX is not set
> CONFIG_NET_IP_TUNNEL=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> CONFIG_SYN_COOKIES=y
> CONFIG_NET_UDP_TUNNEL=y
> CONFIG_NET_FOU=y
> # CONFIG_GENEVE is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> # CONFIG_INET_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> # CONFIG_INET_LRO is not set
> # CONFIG_INET_DIAG is not set
> CONFIG_TCP_CONG_ADVANCED=y
> # CONFIG_TCP_CONG_BIC is not set
> CONFIG_TCP_CONG_CUBIC=y
> # CONFIG_TCP_CONG_WESTWOOD is not set
> # CONFIG_TCP_CONG_HTCP is not set
> # CONFIG_TCP_CONG_HSTCP is not set
> # CONFIG_TCP_CONG_HYBLA is not set
> # CONFIG_TCP_CONG_VEGAS is not set
> # CONFIG_TCP_CONG_SCALABLE is not set
> # CONFIG_TCP_CONG_LP is not set
> # CONFIG_TCP_CONG_VENO is not set
> # CONFIG_TCP_CONG_YEAH is not set
> # CONFIG_TCP_CONG_ILLINOIS is not set
> # CONFIG_TCP_CONG_DCTCP is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> CONFIG_IPV6_MIP6=y
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET6_XFRM_MODE_BEET is not set
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> # CONFIG_IPV6_SIT is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_IPV6_GRE is not set
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
> CONFIG_IPV6_PIMSM_V2=y
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NET_PTP_CLASSIFY=y
> # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
>
> #
> # Core Netfilter Configuration
> #
> # CONFIG_NETFILTER_NETLINK_ACCT is not set
> # CONFIG_NETFILTER_NETLINK_QUEUE is not set
> # CONFIG_NETFILTER_NETLINK_LOG is not set
> # CONFIG_NF_CONNTRACK is not set
> # CONFIG_NF_TABLES is not set
> # CONFIG_NETFILTER_XTABLES is not set
> # CONFIG_IP_SET is not set
> # CONFIG_IP_VS is not set
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_NF_DEFRAG_IPV4 is not set
> # CONFIG_NF_LOG_ARP is not set
> # CONFIG_NF_LOG_IPV4 is not set
> # CONFIG_NF_REJECT_IPV4 is not set
> # CONFIG_IP_NF_IPTABLES is not set
> # CONFIG_IP_NF_ARPTABLES is not set
>
> #
> # IPv6: Netfilter Configuration
> #
> # CONFIG_NF_DEFRAG_IPV6 is not set
> # CONFIG_NF_REJECT_IPV6 is not set
> # CONFIG_NF_LOG_IPV6 is not set
> # CONFIG_IP6_NF_IPTABLES is not set
> # CONFIG_IP_DCCP is not set
> # CONFIG_IP_SCTP is not set
> # CONFIG_RDS is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_L2TP is not set
> # CONFIG_BRIDGE is not set
> CONFIG_HAVE_NET_DSA=y
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_PHONET is not set
> # CONFIG_6LOWPAN is not set
> # CONFIG_IEEE802154 is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> # CONFIG_NET_SCH_CBQ is not set
> # CONFIG_NET_SCH_HTB is not set
> # CONFIG_NET_SCH_HFSC is not set
> # CONFIG_NET_SCH_PRIO is not set
> # CONFIG_NET_SCH_MULTIQ is not set
> # CONFIG_NET_SCH_RED is not set
> # CONFIG_NET_SCH_SFB is not set
> # CONFIG_NET_SCH_SFQ is not set
> # CONFIG_NET_SCH_TEQL is not set
> # CONFIG_NET_SCH_TBF is not set
> # CONFIG_NET_SCH_GRED is not set
> # CONFIG_NET_SCH_DSMARK is not set
> # CONFIG_NET_SCH_NETEM is not set
> # CONFIG_NET_SCH_DRR is not set
> # CONFIG_NET_SCH_MQPRIO is not set
> # CONFIG_NET_SCH_CHOKE is not set
> # CONFIG_NET_SCH_QFQ is not set
> # CONFIG_NET_SCH_CODEL is not set
> # CONFIG_NET_SCH_FQ_CODEL is not set
> # CONFIG_NET_SCH_FQ is not set
> # CONFIG_NET_SCH_HHF is not set
> # CONFIG_NET_SCH_PIE is not set
> # CONFIG_NET_SCH_INGRESS is not set
> # CONFIG_NET_SCH_PLUG is not set
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> # CONFIG_NET_CLS_BASIC is not set
> # CONFIG_NET_CLS_TCINDEX is not set
> # CONFIG_NET_CLS_ROUTE4 is not set
> # CONFIG_NET_CLS_FW is not set
> # CONFIG_NET_CLS_U32 is not set
> # CONFIG_NET_CLS_RSVP is not set
> # CONFIG_NET_CLS_RSVP6 is not set
> # CONFIG_NET_CLS_FLOW is not set
> # CONFIG_NET_CLS_CGROUP is not set
> # CONFIG_NET_CLS_BPF is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> # CONFIG_NET_EMATCH_CMP is not set
> # CONFIG_NET_EMATCH_NBYTE is not set
> # CONFIG_NET_EMATCH_U32 is not set
> # CONFIG_NET_EMATCH_META is not set
> # CONFIG_NET_EMATCH_TEXT is not set
> CONFIG_NET_CLS_ACT=y
> # CONFIG_NET_ACT_POLICE is not set
> # CONFIG_NET_ACT_GACT is not set
> # CONFIG_NET_ACT_MIRRED is not set
> # CONFIG_NET_ACT_NAT is not set
> # CONFIG_NET_ACT_PEDIT is not set
> # CONFIG_NET_ACT_SIMP is not set
> # CONFIG_NET_ACT_SKBEDIT is not set
> # CONFIG_NET_ACT_CSUM is not set
> # CONFIG_NET_ACT_VLAN is not set
> # CONFIG_NET_ACT_BPF is not set
> CONFIG_NET_SCH_FIFO=y
> CONFIG_DCB=y
> # CONFIG_BATMAN_ADV is not set
> # CONFIG_OPENVSWITCH is not set
> # CONFIG_VSOCKETS is not set
> CONFIG_NETLINK_MMAP=y
> # CONFIG_NETLINK_DIAG is not set
> CONFIG_NET_MPLS_GSO=y
> # CONFIG_HSR is not set
> # CONFIG_NET_SWITCHDEV is not set
> # CONFIG_CGROUP_NET_PRIO is not set
> CONFIG_CGROUP_NET_CLASSID=y
> CONFIG_NET_RX_BUSY_POLL=y
> CONFIG_BQL=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> CONFIG_HAMRADIO=y
>
> #
> # Packet Radio protocols
> #
> # CONFIG_AX25 is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> # CONFIG_CFG80211 is not set
> # CONFIG_LIB80211 is not set
>
> #
> # CFG80211 needs to be enabled for MAC80211
> #
> # CONFIG_WIMAX is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
> # CONFIG_CAIF is not set
> # CONFIG_CEPH_LIB is not set
> # CONFIG_NFC is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER=y
> CONFIG_UEVENT_HELPER_PATH=""
> CONFIG_DEVTMPFS=y
> # CONFIG_DEVTMPFS_MOUNT is not set
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_FW_LOADER_USER_HELPER=y
> CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> CONFIG_ALLOW_DEV_COREDUMP=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_GENERIC_CPU_DEVICES is not set
> CONFIG_REGMAP=y
> CONFIG_REGMAP_I2C=m
> CONFIG_REGMAP_SPI=m
> CONFIG_REGMAP_MMIO=m
> CONFIG_DMA_SHARED_BUFFER=y
> CONFIG_FENCE_TRACE=y
>
> #
> # Bus devices
> #
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> # CONFIG_MTD is not set
> CONFIG_DTC=y
> CONFIG_OF=y
>
> #
> # Device Tree and Open Firmware support
> #
> # CONFIG_OF_UNITTEST is not set
> CONFIG_OF_FLATTREE=y
> CONFIG_OF_EARLY_FLATTREE=y
> CONFIG_OF_ADDRESS=y
> CONFIG_OF_ADDRESS_PCI=y
> CONFIG_OF_IRQ=y
> CONFIG_OF_NET=y
> CONFIG_OF_PCI=y
> CONFIG_OF_PCI_IRQ=y
> CONFIG_OF_RESERVED_MEM=y
> # CONFIG_OF_OVERLAY is not set
> CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> # CONFIG_PARPORT is not set
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_NULL_BLK is not set
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_MAC_FLOPPY is not set
> # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
> CONFIG_ZRAM=m
> # CONFIG_ZRAM_LZ4_COMPRESS is not set
> # CONFIG_ZRAM_DEBUG is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_DRBD is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_NVME is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_RAM is not set
> CONFIG_CDROM_PKTCDVD=m
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> CONFIG_CDROM_PKTCDVD_WCACHE=y
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_BLK_DEV_HD is not set
> # CONFIG_BLK_DEV_RBD is not set
> # CONFIG_BLK_DEV_RSXX is not set
>
> #
> # Misc devices
> #
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_AD525X_DPOT is not set
> # CONFIG_DUMMY_IRQ is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_APDS9802ALS is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_ISL29020 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_SENSORS_BH1780 is not set
> # CONFIG_SENSORS_BH1770 is not set
> # CONFIG_SENSORS_APDS990X is not set
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> # CONFIG_TI_DAC7512 is not set
> # CONFIG_BMP085_I2C is not set
> # CONFIG_BMP085_SPI is not set
> # CONFIG_USB_SWITCH_FSA9480 is not set
> # CONFIG_LATTICE_ECP3_CONFIG is not set
> # CONFIG_SRAM is not set
> # CONFIG_C2PORT is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_AT25 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_MAX6875 is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_EEPROM_93XX46 is not set
> # CONFIG_CB710_CORE is not set
>
> #
> # Texas Instruments shared transport line discipline
> #
> # CONFIG_TI_ST is not set
> # CONFIG_SENSORS_LIS3_SPI is not set
> # CONFIG_SENSORS_LIS3_I2C is not set
>
> #
> # Altera FPGA firmware download module
> #
> # CONFIG_ALTERA_STAPL is not set
>
> #
> # Intel MIC Bus Driver
> #
>
> #
> # Intel MIC Host Driver
> #
>
> #
> # Intel MIC Card Driver
> #
> # CONFIG_ECHO is not set
> # CONFIG_CXL_BASE is not set
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_SCSI_MQ_DEFAULT is not set
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=m
> # CONFIG_CHR_DEV_SCH is not set
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
>
> #
> # SCSI Transports
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> CONFIG_SCSI_LOWLEVEL=y
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_ISCSI_BOOT_SYSFS is not set
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> # CONFIG_SCSI_CXGB4_ISCSI is not set
> # CONFIG_SCSI_BNX2_ISCSI is not set
> # CONFIG_BE2ISCSI is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_HPSA is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_3W_SAS is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_MVSAS is not set
> # CONFIG_SCSI_MVUMI is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_SCSI_ESAS2R is not set
> CONFIG_MEGARAID_NEWGEN=y
> # CONFIG_MEGARAID_MM is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> # CONFIG_SCSI_MPT2SAS is not set
> # CONFIG_SCSI_MPT3SAS is not set
> # CONFIG_SCSI_UFSHCD is not set
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_STEX is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_WD719X is not set
> # CONFIG_SCSI_DEBUG is not set
> # CONFIG_SCSI_MESH is not set
> # CONFIG_SCSI_MAC53C94 is not set
> # CONFIG_SCSI_PMCRAID is not set
> # CONFIG_SCSI_PM8001 is not set
> # CONFIG_SCSI_DH is not set
> # CONFIG_SCSI_OSD_INITIATOR is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_SATA_PMP=y
>
> #
> # Controllers with non-SFF native interface
> #
> # CONFIG_SATA_AHCI is not set
> # CONFIG_SATA_AHCI_PLATFORM is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_SATA_ACARD_AHCI is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
>
> #
> # SFF controllers with custom DMA interface
> #
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_SX4 is not set
> CONFIG_ATA_BMDMA=y
>
> #
> # SATA SFF controllers with BMDMA
> #
> # CONFIG_ATA_PIIX is not set
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
>
> #
> # PATA SFF controllers with BMDMA
> #
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_ATP867X is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> CONFIG_PATA_MACIO=y
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RDC is not set
> # CONFIG_PATA_SCH is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_TOSHIBA is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
>
> #
> # PIO-only SFF controllers
> #
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_PLATFORM is not set
> # CONFIG_PATA_RZ1000 is not set
>
> #
> # Generic fallback / legacy drivers
> #
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_LEGACY is not set
> # CONFIG_MD is not set
> # CONFIG_TARGET_CORE is not set
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
> # CONFIG_FIREWIRE_SBP2 is not set
> # CONFIG_FIREWIRE_NET is not set
> # CONFIG_FIREWIRE_NOSY is not set
> CONFIG_MACINTOSH_DRIVERS=y
> CONFIG_ADB=y
> CONFIG_ADB_CUDA=y
> CONFIG_ADB_PMU=y
> CONFIG_ADB_PMU_LED=y
> # CONFIG_PMAC_APM_EMU is not set
> CONFIG_PMAC_MEDIABAY=y
> CONFIG_PMAC_BACKLIGHT=y
> # CONFIG_PMAC_BACKLIGHT_LEGACY is not set
> CONFIG_ADB_MACIO=y
> CONFIG_INPUT_ADBHID=y
> CONFIG_MAC_EMUMOUSEBTN=y
> # CONFIG_THERM_WINDTUNNEL is not set
> # CONFIG_THERM_ADT746X is not set
> # CONFIG_WINDFARM is not set
> # CONFIG_ANSLCD is not set
> # CONFIG_PMAC_RACKMETER is not set
> # CONFIG_SENSORS_AMS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NET_CORE=y
> # CONFIG_BONDING is not set
> # CONFIG_DUMMY is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_NET_FC is not set
> # CONFIG_IFB is not set
> # CONFIG_NET_TEAM is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_IPVLAN is not set
> # CONFIG_VXLAN is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_TUN is not set
> # CONFIG_VETH is not set
> # CONFIG_NLMON is not set
> CONFIG_SUNGEM_PHY=m
> # CONFIG_ARCNET is not set
>
> #
> # CAIF transport drivers
> #
>
> #
> # Distributed Switch Architecture drivers
> #
> # CONFIG_NET_DSA_MV88E6XXX is not set
> # CONFIG_NET_DSA_MV88E6060 is not set
> # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
> # CONFIG_NET_DSA_MV88E6131 is not set
> # CONFIG_NET_DSA_MV88E6123_61_65 is not set
> # CONFIG_NET_DSA_MV88E6171 is not set
> # CONFIG_NET_DSA_MV88E6352 is not set
> # CONFIG_NET_DSA_BCM_SF2 is not set
> CONFIG_ETHERNET=y
> CONFIG_NET_VENDOR_3COM=y
> # CONFIG_VORTEX is not set
> # CONFIG_TYPHOON is not set
> CONFIG_NET_VENDOR_ADAPTEC=y
> # CONFIG_ADAPTEC_STARFIRE is not set
> CONFIG_NET_VENDOR_AGERE=y
> # CONFIG_ET131X is not set
> CONFIG_NET_VENDOR_ALTEON=y
> # CONFIG_ACENIC is not set
> # CONFIG_ALTERA_TSE is not set
> CONFIG_NET_VENDOR_AMD=y
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD_XGBE is not set
> # CONFIG_NET_XGENE is not set
> CONFIG_NET_VENDOR_APPLE=y
> # CONFIG_MACE is not set
> # CONFIG_BMAC is not set
> # CONFIG_NET_VENDOR_ARC is not set
> CONFIG_NET_VENDOR_ATHEROS=y
> # CONFIG_ATL2 is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_ALX is not set
> CONFIG_NET_VENDOR_BROADCOM=y
> # CONFIG_B44 is not set
> # CONFIG_BCMGENET is not set
> # CONFIG_BNX2 is not set
> # CONFIG_CNIC is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2X is not set
> # CONFIG_SYSTEMPORT is not set
> CONFIG_NET_VENDOR_BROCADE=y
> # CONFIG_BNA is not set
> CONFIG_NET_VENDOR_CHELSIO=y
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_CHELSIO_T3 is not set
> # CONFIG_CHELSIO_T4 is not set
> # CONFIG_CHELSIO_T4VF is not set
> CONFIG_NET_VENDOR_CISCO=y
> # CONFIG_ENIC is not set
> # CONFIG_DNET is not set
> CONFIG_NET_VENDOR_DEC=y
> CONFIG_NET_TULIP=y
> # CONFIG_DE2104X is not set
> # CONFIG_TULIP is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
> # CONFIG_ULI526X is not set
> CONFIG_NET_VENDOR_DLINK=y
> # CONFIG_DL2K is not set
> # CONFIG_SUNDANCE is not set
> CONFIG_NET_VENDOR_EMULEX=y
> # CONFIG_BE2NET is not set
> CONFIG_NET_VENDOR_EXAR=y
> # CONFIG_S2IO is not set
> # CONFIG_VXGE is not set
> CONFIG_NET_VENDOR_HP=y
> # CONFIG_HP100 is not set
> CONFIG_NET_VENDOR_INTEL=y
> # CONFIG_E100 is not set
> # CONFIG_E1000 is not set
> # CONFIG_E1000E is not set
> # CONFIG_IGB is not set
> # CONFIG_IGBVF is not set
> # CONFIG_IXGB is not set
> # CONFIG_IXGBE is not set
> # CONFIG_IXGBEVF is not set
> # CONFIG_I40E is not set
> # CONFIG_I40EVF is not set
> CONFIG_FM10K=y
> CONFIG_NET_VENDOR_I825XX=y
> # CONFIG_IP1000 is not set
> # CONFIG_JME is not set
> CONFIG_NET_VENDOR_MARVELL=y
> # CONFIG_MV643XX_ETH is not set
> # CONFIG_MVMDIO is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> CONFIG_NET_VENDOR_MELLANOX=y
> # CONFIG_MLX4_EN is not set
> # CONFIG_MLX4_CORE is not set
> # CONFIG_MLX5_CORE is not set
> CONFIG_NET_VENDOR_MICREL=y
> # CONFIG_KS8842 is not set
> # CONFIG_KS8851 is not set
> # CONFIG_KS8851_MLL is not set
> # CONFIG_KSZ884X_PCI is not set
> CONFIG_NET_VENDOR_MICROCHIP=y
> # CONFIG_ENC28J60 is not set
> CONFIG_NET_VENDOR_MYRI=y
> # CONFIG_MYRI10GE is not set
> # CONFIG_FEALNX is not set
> CONFIG_NET_VENDOR_NATSEMI=y
> # CONFIG_NATSEMI is not set
> # CONFIG_NS83820 is not set
> CONFIG_NET_VENDOR_8390=y
> # CONFIG_NE2K_PCI is not set
> CONFIG_NET_VENDOR_NVIDIA=y
> # CONFIG_FORCEDETH is not set
> CONFIG_NET_VENDOR_OKI=y
> # CONFIG_ETHOC is not set
> CONFIG_NET_PACKET_ENGINE=y
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_NET_VENDOR_QLOGIC=y
> # CONFIG_QLA3XXX is not set
> # CONFIG_QLCNIC is not set
> # CONFIG_QLGE is not set
> # CONFIG_NETXEN_NIC is not set
> CONFIG_NET_VENDOR_QUALCOMM=y
> CONFIG_QCA7000=y
> CONFIG_NET_VENDOR_REALTEK=y
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_R8169 is not set
> CONFIG_NET_VENDOR_RDC=y
> # CONFIG_R6040 is not set
> CONFIG_NET_VENDOR_ROCKER=y
> CONFIG_NET_VENDOR_SAMSUNG=y
> # CONFIG_SXGBE_ETH is not set
> # CONFIG_NET_VENDOR_SEEQ is not set
> CONFIG_NET_VENDOR_SILAN=y
> # CONFIG_SC92031 is not set
> CONFIG_NET_VENDOR_SIS=y
> # CONFIG_SIS900 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SFC is not set
> CONFIG_NET_VENDOR_SMSC=y
> # CONFIG_EPIC100 is not set
> # CONFIG_SMSC911X is not set
> # CONFIG_SMSC9420 is not set
> CONFIG_NET_VENDOR_STMICRO=y
> # CONFIG_STMMAC_ETH is not set
> CONFIG_NET_VENDOR_SUN=y
> # CONFIG_HAPPYMEAL is not set
> CONFIG_SUNGEM=m
> # CONFIG_CASSINI is not set
> # CONFIG_NIU is not set
> CONFIG_NET_VENDOR_TEHUTI=y
> # CONFIG_TEHUTI is not set
> CONFIG_NET_VENDOR_TI=y
> # CONFIG_TI_CPSW_ALE is not set
> # CONFIG_TLAN is not set
> CONFIG_NET_VENDOR_VIA=y
> # CONFIG_VIA_RHINE is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_NET_VENDOR_WIZNET=y
> # CONFIG_WIZNET_W5100 is not set
> # CONFIG_WIZNET_W5300 is not set
> CONFIG_NET_VENDOR_XILINX=y
> # CONFIG_XILINX_EMACLITE is not set
> # CONFIG_XILINX_LL_TEMAC is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PHYLIB is not set
> # CONFIG_MICREL_KS8995MA is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Host-side USB support is needed for USB Network Adapter support
> #
> # CONFIG_USB_NET_DRIVERS is not set
> # CONFIG_WLAN is not set
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
> # CONFIG_WAN is not set
> # CONFIG_VMXNET3 is not set
> # CONFIG_ISDN is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
> # CONFIG_INPUT_SPARSEKMAP is not set
> # CONFIG_INPUT_MATRIXKMAP is not set
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_GPIO_POLLED is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> # CONFIG_KEYBOARD_MATRIX is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_LM8333 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_SAMSUNG is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_OMAP4 is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_CAP11XX is not set
> CONFIG_INPUT_MOUSE=y
> # CONFIG_MOUSE_PS2 is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> # CONFIG_MOUSE_CYAPA is not set
> # CONFIG_MOUSE_ELAN_I2C is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_MOUSE_GPIO is not set
> # CONFIG_MOUSE_SYNAPTICS_I2C is not set
> # CONFIG_MOUSE_SYNAPTICS_USB is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_AD714X is not set
> # CONFIG_INPUT_BMA150 is not set
> # CONFIG_INPUT_E3X0_BUTTON is not set
> # CONFIG_INPUT_PCSPKR is not set
> # CONFIG_INPUT_MMA8450 is not set
> # CONFIG_INPUT_MPU3050 is not set
> # CONFIG_INPUT_GP2A is not set
> # CONFIG_INPUT_GPIO_BEEPER is not set
> # CONFIG_INPUT_GPIO_TILT_POLLED is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_KXTJ9 is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> CONFIG_INPUT_UINPUT=m
> # CONFIG_INPUT_PCF8574 is not set
> # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> # CONFIG_INPUT_ADXL34X is not set
> # CONFIG_INPUT_IMS_PCU is not set
> # CONFIG_INPUT_CMA3000 is not set
> # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
> # CONFIG_INPUT_DRV260X_HAPTICS is not set
> # CONFIG_INPUT_DRV2667_HAPTICS is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_SERIO_XILINX_XPS_PS2 is not set
> # CONFIG_SERIO_ALTERA_PS2 is not set
> # CONFIG_SERIO_PS2MULT is not set
> # CONFIG_SERIO_ARC_PS2 is not set
> # CONFIG_SERIO_APBPS2 is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_NOZOMI is not set
> # CONFIG_N_GSM is not set
> # CONFIG_TRACE_SINK is not set
> # CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
> CONFIG_DEVMEM=y
> # CONFIG_DEVKMEM is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_EARLYCON=y
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_DMA=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> CONFIG_SERIAL_8250_FSL=y
> # CONFIG_SERIAL_8250_DW is not set
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> # CONFIG_SERIAL_MAX310X is not set
> # CONFIG_SERIAL_MFD_HSU is not set
> # CONFIG_SERIAL_UARTLITE is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_PMACZILOG=y
> # CONFIG_SERIAL_PMACZILOG_TTYS is not set
> CONFIG_SERIAL_PMACZILOG_CONSOLE=y
> CONFIG_SERIAL_MPC52xx=y
> CONFIG_SERIAL_MPC52xx_CONSOLE=y
> CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
> # CONFIG_SERIAL_JSM is not set
> # CONFIG_SERIAL_OF_PLATFORM is not set
> # CONFIG_SERIAL_SCCNXP is not set
> # CONFIG_SERIAL_SC16IS7XX is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> # CONFIG_SERIAL_IFX6X60 is not set
> # CONFIG_SERIAL_XILINX_PS_UART is not set
> # CONFIG_SERIAL_ARC is not set
> # CONFIG_SERIAL_RP2 is not set
> # CONFIG_SERIAL_FSL_LPUART is not set
> # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
> # CONFIG_TTY_PRINTK is not set
> # CONFIG_HVC_RTAS is not set
> # CONFIG_HVC_UDBG is not set
> # CONFIG_IPMI_HANDLER is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_TCG_TPM is not set
> CONFIG_DEVPORT=y
> # CONFIG_XILLYBUS is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> # CONFIG_I2C_CHARDEV is not set
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=y
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
>
> #
> # Mac SMBus host controller drivers
> #
> CONFIG_I2C_HYDRA=m
> CONFIG_I2C_POWERMAC=y
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_CBUS_GPIO is not set
> # CONFIG_I2C_DESIGNWARE_PLATFORM is not set
> # CONFIG_I2C_DESIGNWARE_PCI is not set
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_MPC is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_PXA_PCI is not set
> # CONFIG_I2C_RK3X is not set
> # CONFIG_I2C_SIMTEC is not set
> # CONFIG_I2C_XILINX is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_ROBOTFUZZ_OSIF is not set
> CONFIG_I2C_TAOS_EVM=m
> # CONFIG_I2C_TINY_USB is not set
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_SLAVE is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> CONFIG_SPI=y
> # CONFIG_SPI_DEBUG is not set
> CONFIG_SPI_MASTER=y
>
> #
> # SPI Master Controller Drivers
> #
> # CONFIG_SPI_ALTERA is not set
> # CONFIG_SPI_BITBANG is not set
> # CONFIG_SPI_GPIO is not set
> # CONFIG_SPI_MPC52xx is not set
> # CONFIG_SPI_MPC52xx_PSC is not set
> # CONFIG_SPI_FSL_SPI is not set
> # CONFIG_SPI_OC_TINY is not set
> # CONFIG_SPI_PXA2XX is not set
> # CONFIG_SPI_PXA2XX_PCI is not set
> # CONFIG_SPI_SC18IS602 is not set
> # CONFIG_SPI_XCOMM is not set
> # CONFIG_SPI_XILINX is not set
> # CONFIG_SPI_DESIGNWARE is not set
>
> #
> # SPI Protocol Masters
> #
> # CONFIG_SPI_SPIDEV is not set
> # CONFIG_SPI_TLE62X0 is not set
> # CONFIG_SPMI is not set
> # CONFIG_HSI is not set
>
> #
> # PPS support
> #
> CONFIG_PPS=y
> # CONFIG_PPS_DEBUG is not set
> # CONFIG_NTP_PPS is not set
>
> #
> # PPS clients support
> #
> # CONFIG_PPS_CLIENT_KTIMER is not set
> # CONFIG_PPS_CLIENT_LDISC is not set
> # CONFIG_PPS_CLIENT_GPIO is not set
>
> #
> # PPS generators support
> #
>
> #
> # PTP clock support
> #
> CONFIG_PTP_1588_CLOCK=y
>
> #
> # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
> #
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> CONFIG_ARCH_REQUIRE_GPIOLIB=y
> CONFIG_GPIOLIB=y
> CONFIG_GPIO_DEVRES=y
> CONFIG_OF_GPIO=y
> # CONFIG_DEBUG_GPIO is not set
> # CONFIG_GPIO_SYSFS is not set
>
> #
> # Memory mapped GPIO drivers:
> #
> # CONFIG_GPIO_74XX_MMIO is not set
> # CONFIG_GPIO_GENERIC_PLATFORM is not set
> CONFIG_GPIO_MPC5200=y
> # CONFIG_GPIO_SCH311X is not set
> # CONFIG_GPIO_XILINX is not set
> # CONFIG_GPIO_VX855 is not set
> # CONFIG_GPIO_GRGPIO is not set
>
> #
> # I2C GPIO expanders:
> #
> # CONFIG_GPIO_MAX7300 is not set
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
> # CONFIG_GPIO_SX150X is not set
> # CONFIG_GPIO_ADP5588 is not set
> # CONFIG_GPIO_ADNP is not set
>
> #
> # PCI GPIO expanders:
> #
> # CONFIG_GPIO_BT8XX is not set
> # CONFIG_GPIO_AMD8111 is not set
> # CONFIG_GPIO_ML_IOH is not set
> # CONFIG_GPIO_RDC321X is not set
>
> #
> # SPI GPIO expanders:
> #
> # CONFIG_GPIO_MAX7301 is not set
> # CONFIG_GPIO_MCP23S08 is not set
> # CONFIG_GPIO_MC33880 is not set
> # CONFIG_GPIO_74X164 is not set
>
> #
> # AC97 GPIO expanders:
> #
>
> #
> # LPC GPIO expanders:
> #
>
> #
> # MODULbus GPIO expanders:
> #
>
> #
> # USB GPIO expanders:
> #
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> CONFIG_BATTERY_PMU=m
> # CONFIG_BATTERY_SBS is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> # CONFIG_CHARGER_GPIO is not set
> # CONFIG_CHARGER_BQ2415X is not set
> # CONFIG_CHARGER_BQ24190 is not set
> # CONFIG_CHARGER_BQ24735 is not set
> # CONFIG_CHARGER_SMB347 is not set
> # CONFIG_BATTERY_GAUGE_LTC2941 is not set
> # CONFIG_POWER_RESET is not set
> # CONFIG_POWER_AVS is not set
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Native drivers
> #
> # CONFIG_SENSORS_AD7314 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7310 is not set
> # CONFIG_SENSORS_ADT7410 is not set
> # CONFIG_SENSORS_ADT7411 is not set
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_ASC7621 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS620 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_G760A is not set
> # CONFIG_SENSORS_G762 is not set
> # CONFIG_SENSORS_GPIO_FAN is not set
> # CONFIG_SENSORS_HIH6130 is not set
> # CONFIG_SENSORS_JC42 is not set
> # CONFIG_SENSORS_POWR1220 is not set
> # CONFIG_SENSORS_LINEAGE is not set
> # CONFIG_SENSORS_LTC2945 is not set
> # CONFIG_SENSORS_LTC4151 is not set
> # CONFIG_SENSORS_LTC4215 is not set
> # CONFIG_SENSORS_LTC4222 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_LTC4260 is not set
> # CONFIG_SENSORS_LTC4261 is not set
> # CONFIG_SENSORS_MAX1111 is not set
> # CONFIG_SENSORS_MAX16065 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX1668 is not set
> # CONFIG_SENSORS_MAX197 is not set
> # CONFIG_SENSORS_MAX6639 is not set
> # CONFIG_SENSORS_MAX6642 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_MAX6697 is not set
> # CONFIG_SENSORS_HTU21 is not set
> # CONFIG_SENSORS_MCP3021 is not set
> # CONFIG_SENSORS_ADCXX is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM70 is not set
> # CONFIG_SENSORS_LM73 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LM95234 is not set
> # CONFIG_SENSORS_LM95241 is not set
> # CONFIG_SENSORS_LM95245 is not set
> # CONFIG_SENSORS_NTC_THERMISTOR is not set
> # CONFIG_SENSORS_NCT7802 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_PMBUS is not set
> # CONFIG_SENSORS_SHT15 is not set
> # CONFIG_SENSORS_SHT21 is not set
> # CONFIG_SENSORS_SHTC1 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_EMC1403 is not set
> # CONFIG_SENSORS_EMC2103 is not set
> # CONFIG_SENSORS_EMC6W201 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SCH56XX_COMMON is not set
> # CONFIG_SENSORS_SMM665 is not set
> # CONFIG_SENSORS_ADC128D818 is not set
> # CONFIG_SENSORS_ADS1015 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_ADS7871 is not set
> # CONFIG_SENSORS_AMC6821 is not set
> # CONFIG_SENSORS_INA209 is not set
> # CONFIG_SENSORS_INA2XX is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_TMP102 is not set
> # CONFIG_SENSORS_TMP103 is not set
> # CONFIG_SENSORS_TMP401 is not set
> # CONFIG_SENSORS_TMP421 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83795 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_THERMAL is not set
> CONFIG_WATCHDOG=y
> CONFIG_WATCHDOG_CORE=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_GPIO_WATCHDOG is not set
> # CONFIG_XILINX_WATCHDOG is not set
> # CONFIG_DW_WATCHDOG is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_I6300ESB_WDT is not set
> # CONFIG_MPC5200_WDT is not set
> # CONFIG_MEN_A21_WDT is not set
> # CONFIG_WATCHDOG_RTAS is not set
>
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
>
> #
> # USB-based Watchdog Cards
> #
> # CONFIG_USBPCWATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> # CONFIG_SSB is not set
> CONFIG_BCMA_POSSIBLE=y
>
> #
> # Broadcom specific AMBA
> #
> # CONFIG_BCMA is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_AS3711 is not set
> # CONFIG_MFD_AS3722 is not set
> # CONFIG_PMIC_ADP5520 is not set
> # CONFIG_MFD_AAT2870_CORE is not set
> # CONFIG_MFD_ATMEL_HLCDC is not set
> # CONFIG_MFD_BCM590XX is not set
> # CONFIG_MFD_AXP20X is not set
> # CONFIG_MFD_CROS_EC is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_MFD_DA9052_SPI is not set
> # CONFIG_MFD_DA9052_I2C is not set
> # CONFIG_MFD_DA9055 is not set
> # CONFIG_MFD_DA9063 is not set
> # CONFIG_MFD_DA9150 is not set
> # CONFIG_MFD_DLN2 is not set
> # CONFIG_MFD_MC13XXX_SPI is not set
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_MFD_HI6421_PMIC is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_HTC_I2CPLD is not set
> # CONFIG_LPC_ICH is not set
> # CONFIG_LPC_SCH is not set
> # CONFIG_INTEL_SOC_PMIC is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_KEMPLD is not set
> # CONFIG_MFD_88PM800 is not set
> # CONFIG_MFD_88PM805 is not set
> # CONFIG_MFD_88PM860X is not set
> # CONFIG_MFD_MAX14577 is not set
> # CONFIG_MFD_MAX77686 is not set
> # CONFIG_MFD_MAX77693 is not set
> # CONFIG_MFD_MAX8907 is not set
> # CONFIG_MFD_MAX8925 is not set
> # CONFIG_MFD_MAX8997 is not set
> # CONFIG_MFD_MAX8998 is not set
> # CONFIG_MFD_MENF21BMC is not set
> # CONFIG_EZX_PCAP is not set
> # CONFIG_MFD_VIPERBOARD is not set
> # CONFIG_MFD_RETU is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_RTSX_PCI is not set
> # CONFIG_MFD_RT5033 is not set
> # CONFIG_MFD_RTSX_USB is not set
> # CONFIG_MFD_RC5T583 is not set
> # CONFIG_MFD_RK808 is not set
> # CONFIG_MFD_RN5T618 is not set
> # CONFIG_MFD_SEC_CORE is not set
> # CONFIG_MFD_SI476X_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_MFD_SMSC is not set
> # CONFIG_ABX500_CORE is not set
> # CONFIG_MFD_STMPE is not set
> # CONFIG_MFD_SYSCON is not set
> # CONFIG_MFD_TI_AM335X_TSCADC is not set
> # CONFIG_MFD_LP3943 is not set
> # CONFIG_MFD_LP8788 is not set
> # CONFIG_MFD_PALMAS is not set
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS65090 is not set
> # CONFIG_MFD_TPS65217 is not set
> # CONFIG_MFD_TPS65218 is not set
> # CONFIG_MFD_TPS6586X is not set
> # CONFIG_MFD_TPS65910 is not set
> # CONFIG_MFD_TPS65912 is not set
> # CONFIG_MFD_TPS65912_I2C is not set
> # CONFIG_MFD_TPS65912_SPI is not set
> # CONFIG_MFD_TPS80031 is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_TWL6040_CORE is not set
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_LM3533 is not set
> # CONFIG_MFD_TC3589X is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_MFD_VX855 is not set
> # CONFIG_MFD_ARIZONA_I2C is not set
> # CONFIG_MFD_ARIZONA_SPI is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM831X_I2C is not set
> # CONFIG_MFD_WM831X_SPI is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_WM8994 is not set
> # CONFIG_REGULATOR is not set
> # CONFIG_MEDIA_SUPPORT is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_UNINORTH=y
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=1
>
> #
> # Direct Rendering Manager
> #
> CONFIG_DRM=m
> CONFIG_DRM_KMS_HELPER=m
> CONFIG_DRM_KMS_FB_HELPER=y
> CONFIG_DRM_LOAD_EDID_FIRMWARE=y
> CONFIG_DRM_TTM=m
>
> #
> # I2C encoder or helper chips
> #
> # CONFIG_DRM_I2C_ADV7511 is not set
> CONFIG_DRM_I2C_CH7006=m
> CONFIG_DRM_I2C_SIL164=m
> # CONFIG_DRM_I2C_NXP_TDA998X is not set
> # CONFIG_DRM_PTN3460 is not set
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_RADEON_UMS=y
> # CONFIG_DRM_NOUVEAU is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_DRM_VMWGFX is not set
> # CONFIG_DRM_UDL is not set
> # CONFIG_DRM_AST is not set
> # CONFIG_DRM_MGAG200 is not set
> # CONFIG_DRM_CIRRUS_QEMU is not set
> # CONFIG_DRM_QXL is not set
> # CONFIG_DRM_BOCHS is not set
>
> #
> # Frame buffer Devices
> #
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_CMDLINE=y
> CONFIG_FB_DDC=y
> CONFIG_FB_BOOT_VESA_SUPPORT=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> CONFIG_FB_MACMODES=y
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> CONFIG_FB_OF=y
> CONFIG_FB_CONTROL=y
> CONFIG_FB_PLATINUM=y
> CONFIG_FB_VALKYRIE=y
> CONFIG_FB_CT65550=y
> # CONFIG_FB_ASILIANT is not set
> CONFIG_FB_IMSTT=y
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> # CONFIG_FB_OPENCORES is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I740 is not set
> CONFIG_FB_MATROX=y
> CONFIG_FB_MATROX_MILLENIUM=y
> CONFIG_FB_MATROX_MYSTIQUE=y
> CONFIG_FB_MATROX_G=y
> # CONFIG_FB_MATROX_I2C is not set
> CONFIG_FB_RADEON=y
> CONFIG_FB_RADEON_I2C=y
> CONFIG_FB_RADEON_BACKLIGHT=y
> # CONFIG_FB_RADEON_DEBUG is not set
> CONFIG_FB_ATY128=y
> CONFIG_FB_ATY128_BACKLIGHT=y
> CONFIG_FB_ATY=y
> CONFIG_FB_ATY_CT=y
> CONFIG_FB_ATY_GENERIC_LCD=y
> CONFIG_FB_ATY_GX=y
> CONFIG_FB_ATY_BACKLIGHT=y
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> CONFIG_FB_SIS=y
> CONFIG_FB_SIS_300=y
> CONFIG_FB_SIS_315=y
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> CONFIG_FB_3DFX=y
> # CONFIG_FB_3DFX_ACCEL is not set
> CONFIG_FB_3DFX_I2C=y
> CONFIG_FB_VOODOO1=y
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_SMSCUFX is not set
> # CONFIG_FB_UDL is not set
> # CONFIG_FB_IBM_GXT4500 is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_BROADSHEET is not set
> # CONFIG_FB_AUO_K190X is not set
> # CONFIG_FB_SIMPLE is not set
> # CONFIG_FB_SSD1307 is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> # CONFIG_BACKLIGHT_GENERIC is not set
> # CONFIG_BACKLIGHT_ADP8860 is not set
> # CONFIG_BACKLIGHT_ADP8870 is not set
> # CONFIG_BACKLIGHT_LM3639 is not set
> # CONFIG_BACKLIGHT_GPIO is not set
> # CONFIG_BACKLIGHT_LV5207LP is not set
> # CONFIG_BACKLIGHT_BD6107 is not set
> # CONFIG_VGASTATE is not set
> CONFIG_HDMI=y
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VGACON_SOFT_SCROLLBACK is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_DUMMY_CONSOLE_COLUMNS=80
> CONFIG_DUMMY_CONSOLE_ROWS=25
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_SOUND=m
> # CONFIG_SOUND_OSS_CORE is not set
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_COMPRESS_OFFLOAD=m
> CONFIG_SND_JACK=y
> # CONFIG_SND_SEQUENCER is not set
> # CONFIG_SND_MIXER_OSS is not set
> # CONFIG_SND_PCM_OSS is not set
> # CONFIG_SND_HRTIMER is not set
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_MAX_CARDS=32
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_VMASTER=y
> # CONFIG_SND_RAWMIDI_SEQ is not set
> # CONFIG_SND_OPL3_LIB_SEQ is not set
> # CONFIG_SND_OPL4_LIB_SEQ is not set
> # CONFIG_SND_SBAWE_SEQ is not set
> # CONFIG_SND_EMU10K1_SEQ is not set
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_ALOOP is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CTXFI is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_INDIGOIOX is not set
> # CONFIG_SND_INDIGODJX is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_LOLA is not set
> # CONFIG_SND_LX6464ES is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SE6X is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
>
> #
> # HD-Audio
> #
> # CONFIG_SND_HDA_INTEL is not set
> CONFIG_SND_PPC=y
> CONFIG_SND_POWERMAC=m
> CONFIG_SND_POWERMAC_AUTO_DRC=y
> # CONFIG_SND_AOA is not set
> CONFIG_SND_SPI=y
> CONFIG_SND_USB=y
> # CONFIG_SND_USB_AUDIO is not set
> # CONFIG_SND_USB_UA101 is not set
> # CONFIG_SND_USB_USX2Y is not set
> # CONFIG_SND_USB_CAIAQ is not set
> # CONFIG_SND_USB_6FIRE is not set
> # CONFIG_SND_USB_HIFACE is not set
> # CONFIG_SND_BCD2000 is not set
> # CONFIG_SND_USB_POD is not set
> # CONFIG_SND_USB_PODHD is not set
> # CONFIG_SND_USB_TONEPORT is not set
> # CONFIG_SND_USB_VARIAX is not set
> CONFIG_SND_FIREWIRE=y
> # CONFIG_SND_DICE is not set
> # CONFIG_SND_OXFW is not set
> # CONFIG_SND_ISIGHT is not set
> # CONFIG_SND_SCS1X is not set
> # CONFIG_SND_FIREWORKS is not set
> # CONFIG_SND_BEBOB is not set
> CONFIG_SND_SOC=m
> CONFIG_SND_ATMEL_SOC=m
> # CONFIG_SND_DESIGNWARE_I2S is not set
>
> #
> # SoC Audio for Freescale CPUs
> #
>
> #
> # Common SoC Audio options for Freescale CPUs:
> #
> # CONFIG_SND_SOC_FSL_ASRC is not set
> # CONFIG_SND_SOC_FSL_SAI is not set
> CONFIG_SND_SOC_FSL_SSI=m
> # CONFIG_SND_SOC_FSL_SPDIF is not set
> # CONFIG_SND_SOC_FSL_ESAI is not set
> # CONFIG_SND_SOC_IMX_AUDMUX is not set
> # CONFIG_SND_POWERPC_SOC is not set
> # CONFIG_SND_SOC_XTFPGA_I2S is not set
> CONFIG_SND_SOC_I2C_AND_SPI=m
>
> #
> # CODEC drivers
> #
> # CONFIG_SND_SOC_ADAU1701 is not set
> # CONFIG_SND_SOC_AK4104 is not set
> # CONFIG_SND_SOC_AK4554 is not set
> # CONFIG_SND_SOC_AK4642 is not set
> # CONFIG_SND_SOC_AK5386 is not set
> # CONFIG_SND_SOC_ALC5623 is not set
> # CONFIG_SND_SOC_CS35L32 is not set
> # CONFIG_SND_SOC_CS42L51_I2C is not set
> # CONFIG_SND_SOC_CS42L52 is not set
> # CONFIG_SND_SOC_CS42L56 is not set
> # CONFIG_SND_SOC_CS42L73 is not set
> # CONFIG_SND_SOC_CS4265 is not set
> # CONFIG_SND_SOC_CS4270 is not set
> # CONFIG_SND_SOC_CS4271_I2C is not set
> # CONFIG_SND_SOC_CS4271_SPI is not set
> # CONFIG_SND_SOC_CS42XX8_I2C is not set
> # CONFIG_SND_SOC_HDMI_CODEC is not set
> # CONFIG_SND_SOC_ES8328 is not set
> # CONFIG_SND_SOC_PCM1681 is not set
> # CONFIG_SND_SOC_PCM1792A is not set
> # CONFIG_SND_SOC_PCM512x_I2C is not set
> # CONFIG_SND_SOC_PCM512x_SPI is not set
> # CONFIG_SND_SOC_RT5631 is not set
> # CONFIG_SND_SOC_RT5677_SPI is not set
> CONFIG_SND_SOC_SGTL5000=m
> # CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
> # CONFIG_SND_SOC_SPDIF is not set
> # CONFIG_SND_SOC_SSM2602_SPI is not set
> # CONFIG_SND_SOC_SSM2602_I2C is not set
> # CONFIG_SND_SOC_SSM4567 is not set
> # CONFIG_SND_SOC_STA32X is not set
> # CONFIG_SND_SOC_STA350 is not set
> # CONFIG_SND_SOC_TAS2552 is not set
> # CONFIG_SND_SOC_TAS5086 is not set
> # CONFIG_SND_SOC_TFA9879 is not set
> # CONFIG_SND_SOC_TLV320AIC23_I2C is not set
> # CONFIG_SND_SOC_TLV320AIC23_SPI is not set
> # CONFIG_SND_SOC_TLV320AIC31XX is not set
> # CONFIG_SND_SOC_TLV320AIC3X is not set
> # CONFIG_SND_SOC_TS3A227E is not set
> # CONFIG_SND_SOC_WM8510 is not set
> # CONFIG_SND_SOC_WM8523 is not set
> # CONFIG_SND_SOC_WM8580 is not set
> # CONFIG_SND_SOC_WM8711 is not set
> # CONFIG_SND_SOC_WM8728 is not set
> # CONFIG_SND_SOC_WM8731 is not set
> # CONFIG_SND_SOC_WM8737 is not set
> # CONFIG_SND_SOC_WM8741 is not set
> # CONFIG_SND_SOC_WM8750 is not set
> # CONFIG_SND_SOC_WM8753 is not set
> # CONFIG_SND_SOC_WM8770 is not set
> # CONFIG_SND_SOC_WM8776 is not set
> # CONFIG_SND_SOC_WM8804 is not set
> # CONFIG_SND_SOC_WM8903 is not set
> # CONFIG_SND_SOC_WM8962 is not set
> # CONFIG_SND_SOC_WM8978 is not set
> # CONFIG_SND_SOC_TPA6130A2 is not set
> CONFIG_SND_SIMPLE_CARD=m
> # CONFIG_SOUND_PRIME is not set
>
> #
> # HID support
> #
> CONFIG_HID=y
> # CONFIG_HID_BATTERY_STRENGTH is not set
> # CONFIG_HIDRAW is not set
> # CONFIG_UHID is not set
> CONFIG_HID_GENERIC=y
>
> #
> # Special HID drivers
> #
> # CONFIG_HID_A4TECH is not set
> # CONFIG_HID_ACRUX is not set
> # CONFIG_HID_APPLE is not set
> # CONFIG_HID_APPLEIR is not set
> # CONFIG_HID_AUREAL is not set
> # CONFIG_HID_BELKIN is not set
> # CONFIG_HID_BETOP_FF is not set
> # CONFIG_HID_CHERRY is not set
> # CONFIG_HID_CHICONY is not set
> # CONFIG_HID_PRODIKEYS is not set
> # CONFIG_HID_CP2112 is not set
> # CONFIG_HID_CYPRESS is not set
> # CONFIG_HID_DRAGONRISE is not set
> # CONFIG_HID_EMS_FF is not set
> # CONFIG_HID_ELECOM is not set
> # CONFIG_HID_ELO is not set
> # CONFIG_HID_EZKEY is not set
> # CONFIG_HID_HOLTEK is not set
> # CONFIG_HID_GT683R is not set
> # CONFIG_HID_HUION is not set
> # CONFIG_HID_KEYTOUCH is not set
> # CONFIG_HID_KYE is not set
> # CONFIG_HID_UCLOGIC is not set
> # CONFIG_HID_WALTOP is not set
> # CONFIG_HID_GYRATION is not set
> # CONFIG_HID_ICADE is not set
> # CONFIG_HID_TWINHAN is not set
> # CONFIG_HID_KENSINGTON is not set
> # CONFIG_HID_LCPOWER is not set
> # CONFIG_HID_LENOVO is not set
> # CONFIG_HID_LOGITECH is not set
> # CONFIG_HID_MAGICMOUSE is not set
> # CONFIG_HID_MICROSOFT is not set
> # CONFIG_HID_MONTEREY is not set
> # CONFIG_HID_MULTITOUCH is not set
> # CONFIG_HID_NTRIG is not set
> # CONFIG_HID_ORTEK is not set
> # CONFIG_HID_PANTHERLORD is not set
> # CONFIG_HID_PENMOUNT is not set
> # CONFIG_HID_PETALYNX is not set
> # CONFIG_HID_PICOLCD is not set
> # CONFIG_HID_PLANTRONICS is not set
> # CONFIG_HID_PRIMAX is not set
> # CONFIG_HID_ROCCAT is not set
> # CONFIG_HID_SAITEK is not set
> # CONFIG_HID_SAMSUNG is not set
> # CONFIG_HID_SONY is not set
> # CONFIG_HID_SPEEDLINK is not set
> # CONFIG_HID_STEELSERIES is not set
> # CONFIG_HID_SUNPLUS is not set
> # CONFIG_HID_RMI is not set
> # CONFIG_HID_GREENASIA is not set
> # CONFIG_HID_SMARTJOYPLUS is not set
> # CONFIG_HID_TIVO is not set
> # CONFIG_HID_TOPSEED is not set
> # CONFIG_HID_THINGM is not set
> # CONFIG_HID_THRUSTMASTER is not set
> # CONFIG_HID_WACOM is not set
> # CONFIG_HID_WIIMOTE is not set
> # CONFIG_HID_XINMO is not set
> # CONFIG_HID_ZEROPLUS is not set
> # CONFIG_HID_ZYDACRON is not set
> # CONFIG_HID_SENSOR_HUB is not set
>
> #
> # USB HID support
> #
> CONFIG_USB_HID=m
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
>
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
>
> #
> # I2C HID support
> #
> # CONFIG_I2C_HID is not set
> CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
> CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_COMMON=m
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB=m
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEFAULT_PERSIST=y
> CONFIG_USB_DYNAMIC_MINORS=y
> # CONFIG_USB_OTG is not set
> # CONFIG_USB_OTG_WHITELIST is not set
> # CONFIG_USB_OTG_BLACKLIST_HUB is not set
> # CONFIG_USB_OTG_FSM is not set
> # CONFIG_USB_MON is not set
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> # CONFIG_USB_XHCI_HCD is not set
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_EHCI_PCI=m
> # CONFIG_XPS_USB_HCD_XILINX is not set
> CONFIG_USB_EHCI_HCD_PPC_OF=y
> # CONFIG_USB_EHCI_HCD_PLATFORM is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1362_HCD is not set
> # CONFIG_USB_FUSBH200_HCD is not set
> # CONFIG_USB_FOTG210_HCD is not set
> # CONFIG_USB_MAX3421_HCD is not set
> CONFIG_USB_OHCI_HCD=m
> CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
> CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
> CONFIG_USB_OHCI_HCD_PPC_OF=y
> CONFIG_USB_OHCI_HCD_PCI=m
> # CONFIG_USB_OHCI_HCD_PLATFORM is not set
> # CONFIG_USB_UHCI_HCD is not set
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_HCD_TEST_MODE is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> # CONFIG_USB_STORAGE is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USBIP_CORE is not set
> # CONFIG_USB_MUSB_HDRC is not set
> # CONFIG_USB_DWC3 is not set
> # CONFIG_USB_DWC2 is not set
> # CONFIG_USB_CHIPIDEA is not set
> # CONFIG_USB_ISP1760 is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_EHSET_TEST_FIXTURE is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_USB_HSIC_USB3503 is not set
> # CONFIG_USB_LINK_LAYER_TEST is not set
>
> #
> # USB Physical Layer drivers
> #
> # CONFIG_USB_PHY is not set
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_USB_GPIO_VBUS is not set
> # CONFIG_USB_ISP1301 is not set
> # CONFIG_USB_GADGET is not set
> # CONFIG_USB_LED_TRIG is not set
> # CONFIG_UWB is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
> # CONFIG_LEDS_CLASS_FLASH is not set
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_LM3642 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_GPIO is not set
> # CONFIG_LEDS_LP3944 is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> # CONFIG_LEDS_LP5562 is not set
> # CONFIG_LEDS_LP8501 is not set
> # CONFIG_LEDS_LP8860 is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_PCA963X is not set
> # CONFIG_LEDS_DAC124S085 is not set
> # CONFIG_LEDS_BD2802 is not set
> # CONFIG_LEDS_LT3593 is not set
> # CONFIG_LEDS_TCA6507 is not set
> # CONFIG_LEDS_LM355x is not set
>
> #
> # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
> #
> # CONFIG_LEDS_BLINKM is not set
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> # CONFIG_LEDS_TRIGGER_TIMER is not set
> # CONFIG_LEDS_TRIGGER_ONESHOT is not set
> # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> # CONFIG_LEDS_TRIGGER_CPU is not set
> # CONFIG_LEDS_TRIGGER_GPIO is not set
> # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
>
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_LEDS_TRIGGER_TRANSIENT is not set
> # CONFIG_LEDS_TRIGGER_CAMERA is not set
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> # CONFIG_EDAC is not set
> # CONFIG_RTC_CLASS is not set
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
>
> #
> # DMA Devices
> #
> # CONFIG_DW_DMAC_CORE is not set
> # CONFIG_DW_DMAC is not set
> # CONFIG_DW_DMAC_PCI is not set
> # CONFIG_PPC_BESTCOMM is not set
> # CONFIG_FSL_EDMA is not set
> CONFIG_DMA_ENGINE=y
> CONFIG_DMA_OF=y
>
> #
> # DMA Clients
> #
> # CONFIG_ASYNC_TX_DMA is not set
> # CONFIG_DMATEST is not set
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
> # CONFIG_VIRT_DRIVERS is not set
>
> #
> # Virtio drivers
> #
> # CONFIG_VIRTIO_PCI is not set
> # CONFIG_VIRTIO_MMIO is not set
>
> #
> # Microsoft Hyper-V guest support
> #
> CONFIG_STAGING=y
> # CONFIG_COMEDI is not set
> # CONFIG_RTS5208 is not set
> # CONFIG_FB_SM7XX is not set
> # CONFIG_FB_XGI is not set
> # CONFIG_FT1000 is not set
>
> #
> # Speakup console speech
> #
> # CONFIG_SPEAKUP is not set
> # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
> # CONFIG_STAGING_MEDIA is not set
>
> #
> # Android
> #
> # CONFIG_USB_WPAN_HCD is not set
> # CONFIG_WIMAX_GDM72XX is not set
> # CONFIG_LTE_GDM724X is not set
> # CONFIG_FIREWIRE_SERIAL is not set
> # CONFIG_LUSTRE_FS is not set
> # CONFIG_DGNC is not set
> # CONFIG_DGAP is not set
> # CONFIG_GS_FPGABOOT is not set
> # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
> # CONFIG_FB_TFT is not set
> CONFIG_I2O=m
> CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_CONFIG=m
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=m
> CONFIG_I2O_BLOCK=m
> CONFIG_I2O_SCSI=m
> CONFIG_I2O_PROC=m
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_HAVE_CLK_PREPARE=y
> CONFIG_COMMON_CLK=y
>
> #
> # Common Clock Framework
> #
> # CONFIG_COMMON_CLK_SI5351 is not set
> # CONFIG_COMMON_CLK_SI570 is not set
> # CONFIG_COMMON_CLK_PXA is not set
> # CONFIG_COMMON_CLK_CDCE706 is not set
> # CONFIG_COMMON_CLK_QCOM is not set
>
> #
> # Hardware Spinlock drivers
> #
>
> #
> # Clock Source drivers
> #
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> # CONFIG_ATMEL_PIT is not set
> # CONFIG_SH_TIMER_CMT is not set
> # CONFIG_SH_TIMER_MTU2 is not set
> # CONFIG_SH_TIMER_TMU is not set
> # CONFIG_EM_TIMER_STI is not set
> # CONFIG_MAILBOX is not set
> CONFIG_IOMMU_SUPPORT=y
>
> #
> # Generic IOMMU Pagetable Support
> #
>
> #
> # Remoteproc drivers
> #
> # CONFIG_STE_MODEM_RPROC is not set
>
> #
> # Rpmsg drivers
> #
>
> #
> # SOC (System On Chip) specific Drivers
> #
> # CONFIG_SOC_TI is not set
> CONFIG_PM_DEVFREQ=y
>
> #
> # DEVFREQ Governors
> #
> # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
> # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
> # CONFIG_DEVFREQ_GOV_POWERSAVE is not set
> # CONFIG_DEVFREQ_GOV_USERSPACE is not set
>
> #
> # DEVFREQ Drivers
> #
> # CONFIG_PM_DEVFREQ_EVENT is not set
> # CONFIG_EXTCON is not set
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> # CONFIG_VME_BUS is not set
> # CONFIG_PWM is not set
> CONFIG_IRQCHIP=y
> # CONFIG_IPACK_BUS is not set
> # CONFIG_RESET_CONTROLLER is not set
> # CONFIG_FMC is not set
>
> #
> # PHY Subsystem
> #
> CONFIG_GENERIC_PHY=y
> # CONFIG_BCM_KONA_USB2_PHY is not set
> # CONFIG_POWERCAP is not set
> # CONFIG_MCB is not set
> CONFIG_RAS=y
> # CONFIG_THUNDERBOLT is not set
>
> #
> # Android
> #
> # CONFIG_ANDROID is not set
>
> #
> # File systems
> #
> # CONFIG_EXT2_FS is not set
> # CONFIG_EXT3_FS is not set
> CONFIG_EXT4_FS=m
> CONFIG_EXT4_USE_FOR_EXT23=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> CONFIG_EXT4_DEBUG=y
> CONFIG_JBD2=m
> CONFIG_JBD2_DEBUG=y
> CONFIG_FS_MBCACHE=m
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> # CONFIG_FS_DAX is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_EXPORTFS=y
> CONFIG_FILE_LOCKING=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_FANOTIFY=y
> CONFIG_QUOTA=y
> CONFIG_QUOTA_NETLINK_INTERFACE=y
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QUOTA_DEBUG is not set
> CONFIG_QFMT_V1=m
> # CONFIG_QFMT_V2 is not set
> CONFIG_QUOTACTL=y
> CONFIG_AUTOFS4_FS=m
> # CONFIG_FUSE_FS is not set
> CONFIG_OVERLAY_FS=y
>
> #
> # Caches
> #
> CONFIG_FSCACHE=m
> CONFIG_FSCACHE_STATS=y
> # CONFIG_FSCACHE_HISTOGRAM is not set
> # CONFIG_FSCACHE_DEBUG is not set
> # CONFIG_FSCACHE_OBJECT_LIST is not set
> # CONFIG_CACHEFILES is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_KERNFS=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> # CONFIG_HUGETLB_PAGE is not set
> # CONFIG_CONFIGFS_FS is not set
> # CONFIG_MISC_FILESYSTEMS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_MAC_ROMAN is not set
> # CONFIG_NLS_MAC_CELTIC is not set
> # CONFIG_NLS_MAC_CENTEURO is not set
> # CONFIG_NLS_MAC_CROATIAN is not set
> # CONFIG_NLS_MAC_CYRILLIC is not set
> # CONFIG_NLS_MAC_GAELIC is not set
> # CONFIG_NLS_MAC_GREEK is not set
> # CONFIG_NLS_MAC_ICELAND is not set
> # CONFIG_NLS_MAC_INUIT is not set
> # CONFIG_NLS_MAC_ROMANIAN is not set
> # CONFIG_NLS_MAC_TURKISH is not set
> # CONFIG_NLS_UTF8 is not set
> # CONFIG_BINARY_PRINTF is not set
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> # CONFIG_HAVE_ARCH_BITREVERSE is not set
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_NET_UTILS=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IO=y
> # CONFIG_CRC_CCITT is not set
> CONFIG_CRC16=y
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC32_SELFTEST is not set
> CONFIG_CRC32_SLICEBY8=y
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> # CONFIG_CRC32_BIT is not set
> # CONFIG_CRC7 is not set
> # CONFIG_LIBCRC32C is not set
> # CONFIG_CRC8 is not set
> # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
> # CONFIG_RANDOM32_SELFTEST is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_LZ4_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> # CONFIG_XZ_DEC_X86 is not set
> CONFIG_XZ_DEC_POWERPC=y
> # CONFIG_XZ_DEC_IA64 is not set
> # CONFIG_XZ_DEC_ARM is not set
> # CONFIG_XZ_DEC_ARMTHUMB is not set
> # CONFIG_XZ_DEC_SPARC is not set
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_DECOMPRESS_LZ4=y
> CONFIG_INTERVAL_TREE=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT_MAP=y
> CONFIG_HAS_DMA=y
> CONFIG_DQL=y
> CONFIG_GLOB=y
> # CONFIG_GLOB_SELFTEST is not set
> CONFIG_NLATTR=y
> CONFIG_GENERIC_ATOMIC64=y
> CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> CONFIG_AVERAGE=y
> # CONFIG_CORDIC is not set
> # CONFIG_DDR is not set
> CONFIG_LIBFDT=y
> CONFIG_FONT_SUPPORT=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_ARCH_HAS_SG_CHAIN=y
>
> #
> # Kernel hacking
> #
>
> #
> # printk and dmesg options
> #
> CONFIG_PRINTK_TIME=y
> CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
>
> #
> # Compile-time checks and compiler options
> #
> CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_INFO_REDUCED is not set
> # CONFIG_DEBUG_INFO_SPLIT is not set
> CONFIG_DEBUG_INFO_DWARF4=y
> # CONFIG_GDB_SCRIPTS is not set
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
> CONFIG_FRAME_WARN=1024
> # CONFIG_STRIP_ASM_SYMS is not set
> # CONFIG_READABLE_ASM is not set
> # CONFIG_UNUSED_SYMBOLS is not set
> # CONFIG_PAGE_OWNER is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> # CONFIG_MAGIC_SYSRQ is not set
> CONFIG_DEBUG_KERNEL=y
>
> #
> # Memory Debugging
> #
> CONFIG_PAGE_EXTENSION=y
> # CONFIG_DEBUG_OBJECTS is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> # CONFIG_DEBUG_KMEMLEAK is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_VM is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> # CONFIG_DEBUG_HIGHMEM is not set
> CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_SHIRQ is not set
>
> #
> # Debug Lockups and Hangs
> #
> CONFIG_LOCKUP_DETECTOR=y
> # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
> CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
> CONFIG_DETECT_HUNG_TASK=y
> CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> # CONFIG_PANIC_ON_OOPS is not set
> CONFIG_PANIC_ON_OOPS_VALUE=0
> CONFIG_SCHED_DEBUG=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_SCHED_STACK_END_CHECK is not set
> # CONFIG_TIMER_STATS is not set
>
> #
> # Lock Debugging (spinlocks, mutexes, etc...)
> #
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_ATOMIC_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_LOCK_TORTURE_TEST is not set
> CONFIG_STACKTRACE=y
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_PI_LIST is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> # CONFIG_DEBUG_CREDENTIALS is not set
>
> #
> # RCU Debugging
> #
> # CONFIG_SPARSE_RCU_POINTER is not set
> # CONFIG_TORTURE_TEST is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_RCU_TRACE is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_NOTIFIER_ERROR_INJECTION is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_TRACING_SUPPORT=y
> # CONFIG_FTRACE is not set
>
> #
> # Runtime Testing
> #
> # CONFIG_TEST_LIST_SORT is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_RBTREE_TEST is not set
> # CONFIG_INTERVAL_TREE_TEST is not set
> # CONFIG_PERCPU_TEST is not set
> # CONFIG_ATOMIC64_SELFTEST is not set
> # CONFIG_TEST_HEXDUMP is not set
> # CONFIG_TEST_STRING_HELPERS is not set
> # CONFIG_TEST_KSTRTOX is not set
> # CONFIG_TEST_RHASHTABLE is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_TEST_LKM is not set
> # CONFIG_TEST_USER_COPY is not set
> # CONFIG_TEST_BPF is not set
> # CONFIG_TEST_FIRMWARE is not set
> # CONFIG_TEST_UDELAY is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_PPC_DISABLE_WERROR=y
> CONFIG_PRINT_STACK_DEPTH=64
> # CONFIG_CODE_PATCHING_SELFTEST is not set
> # CONFIG_FTR_FIXUP_SELFTEST is not set
> # CONFIG_MSI_BITMAP_SELFTEST is not set
> # CONFIG_XMON is not set
> # CONFIG_BDI_SWITCH is not set
> CONFIG_BOOTX_TEXT=y
> # CONFIG_PPC_EARLY_DEBUG is not set
> CONFIG_STRICT_DEVMEM=y
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> # CONFIG_SECURITY is not set
> # CONFIG_SECURITYFS is not set
> CONFIG_DEFAULT_SECURITY_DAC=y
> CONFIG_DEFAULT_SECURITY=""
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_USER is not set
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> # CONFIG_CRYPTO_GF128MUL is not set
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> # CONFIG_CRYPTO_MCRYPTD is not set
> # CONFIG_CRYPTO_AUTHENC is not set
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> # CONFIG_CRYPTO_SEQIV is not set
>
> #
> # Block modes
> #
> # CONFIG_CRYPTO_CBC is not set
> # CONFIG_CRYPTO_CTR is not set
> # CONFIG_CRYPTO_CTS is not set
> # CONFIG_CRYPTO_ECB is not set
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> # CONFIG_CRYPTO_CMAC is not set
> # CONFIG_CRYPTO_HMAC is not set
> # CONFIG_CRYPTO_XCBC is not set
> # CONFIG_CRYPTO_VMAC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=y
> CONFIG_CRYPTO_CRC32=y
> CONFIG_CRYPTO_CRCT10DIF=y
> # CONFIG_CRYPTO_GHASH is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> # CONFIG_CRYPTO_SHA1 is not set
> # CONFIG_CRYPTO_SHA1_PPC is not set
> # CONFIG_CRYPTO_SHA256 is not set
> # CONFIG_CRYPTO_SHA512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> # CONFIG_CRYPTO_ANUBIS is not set
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> # CONFIG_CRYPTO_DES is not set
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
>
> #
> # Compression
> #
> # CONFIG_CRYPTO_DEFLATE is not set
> # CONFIG_CRYPTO_ZLIB is not set
> # CONFIG_CRYPTO_LZO is not set
> # CONFIG_CRYPTO_LZ4 is not set
> # CONFIG_CRYPTO_LZ4HC is not set
>
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=y
> # CONFIG_CRYPTO_DRBG_MENU is not set
> # CONFIG_CRYPTO_USER_API_HASH is not set
> # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> # CONFIG_CRYPTO_USER_API_RNG is not set
> CONFIG_CRYPTO_HW=y
> # CONFIG_CRYPTO_DEV_HIFN_795X is not set
> # CONFIG_VIRTUALIZATION is not set
>
> --
> Pranith
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 5:34 ` Pranith Kumar
@ 2015-03-16 8:16 ` Michael Ellerman
2015-03-16 13:30 ` Pranith Kumar
0 siblings, 1 reply; 24+ messages in thread
From: Michael Ellerman @ 2015-03-16 8:16 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, 2015-03-16 at 01:34 -0400, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 1:11 AM, Pranith Kumar <bobby.prani@gmail.com> wrote:
> > Hello,
> >
> > I have a power mac mini 32-bit system.
> >
> ...
> > You can see the panic message here: http://imgur.com/s1lH15g. (there
> > is no log and I have no serial console).
>
> There was some debug code in there when it hit. The actual hang seems
> to be in printk_late_init(). It does not return from this. May be this
> is a hint?
That is where the boot consoles get disabled and it switches to the "real"
console. It suggests that the system is not "hung" there but you just lost
output.
Try booting with "keep_bootcon" ?
If that doesn't help try booting with "udbg-immortal".
cheers
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 8:16 ` Michael Ellerman
@ 2015-03-16 13:30 ` Pranith Kumar
2015-03-16 14:01 ` Peter Hurley
2015-03-16 23:22 ` Michael Ellerman
0 siblings, 2 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-16 13:30 UTC (permalink / raw)
To: Michael Ellerman; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 4:16 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> On Mon, 2015-03-16 at 01:34 -0400, Pranith Kumar wrote:
>> On Mon, Mar 16, 2015 at 1:11 AM, Pranith Kumar <bobby.prani@gmail.com> wrote:
>> > Hello,
>> >
>> > I have a power mac mini 32-bit system.
>> >
>> ...
>> > You can see the panic message here: http://imgur.com/s1lH15g. (there
>> > is no log and I have no serial console).
>>
>> There was some debug code in there when it hit. The actual hang seems
>> to be in printk_late_init(). It does not return from this. May be this
>> is a hint?
>
> That is where the boot consoles get disabled and it switches to the "real"
> console. It suggests that the system is not "hung" there but you just lost
> output.
>
> Try booting with "keep_bootcon" ?
I tried this and got to the same place as in the first mail:
http://imgur.com/s1lH15g
There is a kernel panic with the message printed. Any more suggestions
to how to debug this?
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 13:30 ` Pranith Kumar
@ 2015-03-16 14:01 ` Peter Hurley
2015-03-16 23:22 ` Michael Ellerman
1 sibling, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-16 14:01 UTC (permalink / raw)
To: Pranith Kumar, Michael Ellerman; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/16/2015 09:30 AM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 4:16 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>> On Mon, 2015-03-16 at 01:34 -0400, Pranith Kumar wrote:
>>> On Mon, Mar 16, 2015 at 1:11 AM, Pranith Kumar <bobby.prani@gmail.com> wrote:
>>>> Hello,
>>>>
>>>> I have a power mac mini 32-bit system.
>>>>
>>> ...
>>>> You can see the panic message here: http://imgur.com/s1lH15g. (there
>>>> is no log and I have no serial console).
>>>
>>> There was some debug code in there when it hit. The actual hang seems
>>> to be in printk_late_init(). It does not return from this. May be this
>>> is a hint?
>>
>> That is where the boot consoles get disabled and it switches to the "real"
>> console. It suggests that the system is not "hung" there but you just lost
>> output.
>>
>> Try booting with "keep_bootcon" ?
>
> I tried this and got to the same place as in the first mail:
> http://imgur.com/s1lH15g
>
> There is a kernel panic with the message printed. Any more suggestions
> to how to debug this?
git bisect.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 13:30 ` Pranith Kumar
2015-03-16 14:01 ` Peter Hurley
@ 2015-03-16 23:22 ` Michael Ellerman
2015-03-17 2:02 ` Pranith Kumar
1 sibling, 1 reply; 24+ messages in thread
From: Michael Ellerman @ 2015-03-16 23:22 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, 2015-03-16 at 09:30 -0400, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 4:16 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> > On Mon, 2015-03-16 at 01:34 -0400, Pranith Kumar wrote:
> >> On Mon, Mar 16, 2015 at 1:11 AM, Pranith Kumar <bobby.prani@gmail.com> wrote:
> >> > Hello,
> >> >
> >> > I have a power mac mini 32-bit system.
> >> >
> >> ...
> >> > You can see the panic message here: http://imgur.com/s1lH15g. (there
> >> > is no log and I have no serial console).
> >>
> >> There was some debug code in there when it hit. The actual hang seems
> >> to be in printk_late_init(). It does not return from this. May be this
> >> is a hint?
> >
> > That is where the boot consoles get disabled and it switches to the "real"
> > console. It suggests that the system is not "hung" there but you just lost
> > output.
> >
> > Try booting with "keep_bootcon" ?
>
> I tried this and got to the same place as in the first mail:
> http://imgur.com/s1lH15g
>
> There is a kernel panic with the message printed. Any more suggestions
> to how to debug this?
The log shows that init is being killed, that's what's causing the panic.
The exitcode of init is 0x200, which due to the vagaries of UNIX is I think an
"exit status" of 2 in the common usage.
But it suggests that your init is just exiting for some reason?
What is your init?
cheers
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-16 23:22 ` Michael Ellerman
@ 2015-03-17 2:02 ` Pranith Kumar
2015-03-17 2:58 ` Peter Hurley
0 siblings, 1 reply; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 2:02 UTC (permalink / raw)
To: Michael Ellerman; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 7:22 PM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>
> The log shows that init is being killed, that's what's causing the panic.
>
> The exitcode of init is 0x200, which due to the vagaries of UNIX is I think an
> "exit status" of 2 in the common usage.
>
> But it suggests that your init is just exiting for some reason?
>
Yeah, seems like that. Not sure why though. git bisect seems to be the
only option.
> What is your init?
I am using systemd from debian unstable.
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 2:02 ` Pranith Kumar
@ 2015-03-17 2:58 ` Peter Hurley
2015-03-17 3:12 ` Pranith Kumar
0 siblings, 1 reply; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 2:58 UTC (permalink / raw)
To: Pranith Kumar, Michael Ellerman; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/16/2015 10:02 PM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 7:22 PM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>>
>> The log shows that init is being killed, that's what's causing the panic.
>>
>> The exitcode of init is 0x200, which due to the vagaries of UNIX is I think an
>> "exit status" of 2 in the common usage.
>>
>> But it suggests that your init is just exiting for some reason?
>>
>
> Yeah, seems like that. Not sure why though. git bisect seems to be the
> only option.
>
>> What is your init?
>
> I am using systemd from debian unstable.
Do you have a stdout-path property defined in your dts to a serial
console you're not actually using?
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 2:58 ` Peter Hurley
@ 2015-03-17 3:12 ` Pranith Kumar
0 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 3:12 UTC (permalink / raw)
To: Peter Hurley; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>> What is your init?
>>
>> I am using systemd from debian unstable.
>
> Do you have a stdout-path property defined in your dts to a serial
> console you're not actually using?
>
I am using tty0 as my console. From the config which I posted, it has:
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
I am not using any device tree file.
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 3:12 ` Pranith Kumar
0 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 3:12 UTC (permalink / raw)
To: Peter Hurley; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>> What is your init?
>>
>> I am using systemd from debian unstable.
>
> Do you have a stdout-path property defined in your dts to a serial
> console you're not actually using?
>
I am using tty0 as my console. From the config which I posted, it has:
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
I am not using any device tree file.
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 3:12 ` Pranith Kumar
@ 2015-03-17 3:18 ` Peter Hurley
-1 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 3:18 UTC (permalink / raw)
To: Pranith Kumar; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On 03/16/2015 11:12 PM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>> What is your init?
>>>
>>> I am using systemd from debian unstable.
>>
>> Do you have a stdout-path property defined in your dts to a serial
>> console you're not actually using?
>>
>
> I am using tty0 as my console. From the config which I posted, it has:
>
> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>
> I am not using any device tree file.
Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
changes I made, so I thought I'd check if that might have affected
your setup as well.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 3:18 ` Peter Hurley
0 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 3:18 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/16/2015 11:12 PM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>> What is your init?
>>>
>>> I am using systemd from debian unstable.
>>
>> Do you have a stdout-path property defined in your dts to a serial
>> console you're not actually using?
>>
>
> I am using tty0 as my console. From the config which I posted, it has:
>
> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>
> I am not using any device tree file.
Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
changes I made, so I thought I'd check if that might have affected
your setup as well.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 3:18 ` Peter Hurley
@ 2015-03-17 6:33 ` Pranith Kumar
-1 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 6:33 UTC (permalink / raw)
To: Peter Hurley; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 11:18 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> On 03/16/2015 11:12 PM, Pranith Kumar wrote:
>> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>> What is your init?
>>>>
>>>> I am using systemd from debian unstable.
>>>
>>> Do you have a stdout-path property defined in your dts to a serial
>>> console you're not actually using?
>>>
>>
>> I am using tty0 as my console. From the config which I posted, it has:
>>
>> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>>
>> I am not using any device tree file.
>
> Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
> changes I made, so I thought I'd check if that might have affected
> your setup as well.
>
And the painful slow bisecting did lead to that commit:
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[2fa645cb2703d9b3786d850db815414dfeefa51d] of: Fix premature
bootconsole disable with 'stdout-path'
$ git show 2fa645cb2703d9b3786d850db815414dfeefa51d
commit 2fa645cb2703d9b3786d850db815414dfeefa51d
Author: Peter Hurley <peter@hurleysoftware.com>
Date: Sun Mar 1 12:21:22 2015 -0500
of: Fix premature bootconsole disable with 'stdout-path'
Support for devicetree serial consoles via 'stdout-path' causes
bootconsoles to be disabled when the vt dummy console loads, since
there is no preferred console (the preferred console is not added
until the device is probed).
Ensure there is at least a preferred console, even if never matched.
More info:
$ git bisect log
git bisect start
# bad: [06e5801b8cb3fc057d88cb4dc03c0b64b2744cda] Linux 4.0-rc4
git bisect bad 06e5801b8cb3fc057d88cb4dc03c0b64b2744cda
# good: [bfa76d49576599a4b9f9b7a71f23d73d6dcff735] Linux 3.19
git bisect good bfa76d49576599a4b9f9b7a71f23d73d6dcff735
# good: [1a67e256dbd80f47f339c4a88c34deee12489aa0] ARM: mvebu:
ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
git bisect good 1a67e256dbd80f47f339c4a88c34deee12489aa0
# good: [878ba61aa98cbb97a513757800e77613f856a029] Merge tag
'soc-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect good 878ba61aa98cbb97a513757800e77613f856a029
# good: [18a8d49973667aa016e68826eeb374788b7c63b0] Merge tag
'clk-for-linus-3.20' of
git://git.linaro.org/people/mike.turquette/linux
git bisect good 18a8d49973667aa016e68826eeb374788b7c63b0
# good: [bfda4031621b048ca634abc5f6bce1aa490ac4e5] MAINTAINERS: Add
myself as co-maintainer to the legacy support of the mvebu SoCs
git bisect good bfda4031621b048ca634abc5f6bce1aa490ac4e5
# good: [29191c7f71aa55401c83df60482417d3c511edde] Merge tag
'char-misc-4.0-rc3' of
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
git bisect good 29191c7f71aa55401c83df60482417d3c511edde
# good: [36bef88380037288d5b575ed2029de694533b1ec] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect good 36bef88380037288d5b575ed2029de694533b1ec
# bad: [3d52c5bdbe57e2b45d9cc8da930b9ab42b5198c4] Merge tag
'devicetree-fixes-for-4.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect bad 3d52c5bdbe57e2b45d9cc8da930b9ab42b5198c4
# good: [91e9134eda82b57952fdbdb0c5990a7a6609ff13] Merge tag
'pci-v4.0-fixes-2' of
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
git bisect good 91e9134eda82b57952fdbdb0c5990a7a6609ff13
# good: [c202baf017aea0c860e53131bc55bb1af7177e76] Merge branch 'akpm'
(patches from Andrew)
git bisect good c202baf017aea0c860e53131bc55bb1af7177e76
# bad: [649022e08e4798ffb6e9b11c56ee6b2c62465d11] of/unittest: Fix the
wrong expected value in of_selftest_property_string
git bisect bad 649022e08e4798ffb6e9b11c56ee6b2c62465d11
# good: [2c192699a7050ef5bdf1e2cc95fdddfbcf524509] Merge tag
'v4.0-rc3' into HEAD
git bisect good 2c192699a7050ef5bdf1e2cc95fdddfbcf524509
# bad: [d3a891652adb82e1973348c703a597cb54e41dea] of/overlay: Remove
unused variable
git bisect bad d3a891652adb82e1973348c703a597cb54e41dea
# bad: [20aa4d8ae8d2ada8f959364ebc096b8841245456] Documentation: DT:
Renamed of-serial.txt to 8250.txt
git bisect bad 20aa4d8ae8d2ada8f959364ebc096b8841245456
Thanks!
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 6:33 ` Pranith Kumar
0 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 6:33 UTC (permalink / raw)
To: Peter Hurley; +Cc: open list:LINUX FOR POWERPC..., LKML
On Mon, Mar 16, 2015 at 11:18 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> On 03/16/2015 11:12 PM, Pranith Kumar wrote:
>> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>> What is your init?
>>>>
>>>> I am using systemd from debian unstable.
>>>
>>> Do you have a stdout-path property defined in your dts to a serial
>>> console you're not actually using?
>>>
>>
>> I am using tty0 as my console. From the config which I posted, it has:
>>
>> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>>
>> I am not using any device tree file.
>
> Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
> changes I made, so I thought I'd check if that might have affected
> your setup as well.
>
And the painful slow bisecting did lead to that commit:
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[2fa645cb2703d9b3786d850db815414dfeefa51d] of: Fix premature
bootconsole disable with 'stdout-path'
$ git show 2fa645cb2703d9b3786d850db815414dfeefa51d
commit 2fa645cb2703d9b3786d850db815414dfeefa51d
Author: Peter Hurley <peter@hurleysoftware.com>
Date: Sun Mar 1 12:21:22 2015 -0500
of: Fix premature bootconsole disable with 'stdout-path'
Support for devicetree serial consoles via 'stdout-path' causes
bootconsoles to be disabled when the vt dummy console loads, since
there is no preferred console (the preferred console is not added
until the device is probed).
Ensure there is at least a preferred console, even if never matched.
More info:
$ git bisect log
git bisect start
# bad: [06e5801b8cb3fc057d88cb4dc03c0b64b2744cda] Linux 4.0-rc4
git bisect bad 06e5801b8cb3fc057d88cb4dc03c0b64b2744cda
# good: [bfa76d49576599a4b9f9b7a71f23d73d6dcff735] Linux 3.19
git bisect good bfa76d49576599a4b9f9b7a71f23d73d6dcff735
# good: [1a67e256dbd80f47f339c4a88c34deee12489aa0] ARM: mvebu:
ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
git bisect good 1a67e256dbd80f47f339c4a88c34deee12489aa0
# good: [878ba61aa98cbb97a513757800e77613f856a029] Merge tag
'soc-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect good 878ba61aa98cbb97a513757800e77613f856a029
# good: [18a8d49973667aa016e68826eeb374788b7c63b0] Merge tag
'clk-for-linus-3.20' of
git://git.linaro.org/people/mike.turquette/linux
git bisect good 18a8d49973667aa016e68826eeb374788b7c63b0
# good: [bfda4031621b048ca634abc5f6bce1aa490ac4e5] MAINTAINERS: Add
myself as co-maintainer to the legacy support of the mvebu SoCs
git bisect good bfda4031621b048ca634abc5f6bce1aa490ac4e5
# good: [29191c7f71aa55401c83df60482417d3c511edde] Merge tag
'char-misc-4.0-rc3' of
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
git bisect good 29191c7f71aa55401c83df60482417d3c511edde
# good: [36bef88380037288d5b575ed2029de694533b1ec] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect good 36bef88380037288d5b575ed2029de694533b1ec
# bad: [3d52c5bdbe57e2b45d9cc8da930b9ab42b5198c4] Merge tag
'devicetree-fixes-for-4.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect bad 3d52c5bdbe57e2b45d9cc8da930b9ab42b5198c4
# good: [91e9134eda82b57952fdbdb0c5990a7a6609ff13] Merge tag
'pci-v4.0-fixes-2' of
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
git bisect good 91e9134eda82b57952fdbdb0c5990a7a6609ff13
# good: [c202baf017aea0c860e53131bc55bb1af7177e76] Merge branch 'akpm'
(patches from Andrew)
git bisect good c202baf017aea0c860e53131bc55bb1af7177e76
# bad: [649022e08e4798ffb6e9b11c56ee6b2c62465d11] of/unittest: Fix the
wrong expected value in of_selftest_property_string
git bisect bad 649022e08e4798ffb6e9b11c56ee6b2c62465d11
# good: [2c192699a7050ef5bdf1e2cc95fdddfbcf524509] Merge tag
'v4.0-rc3' into HEAD
git bisect good 2c192699a7050ef5bdf1e2cc95fdddfbcf524509
# bad: [d3a891652adb82e1973348c703a597cb54e41dea] of/overlay: Remove
unused variable
git bisect bad d3a891652adb82e1973348c703a597cb54e41dea
# bad: [20aa4d8ae8d2ada8f959364ebc096b8841245456] Documentation: DT:
Renamed of-serial.txt to 8250.txt
git bisect bad 20aa4d8ae8d2ada8f959364ebc096b8841245456
Thanks!
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 6:33 ` Pranith Kumar
@ 2015-03-17 20:03 ` Peter Hurley
-1 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:03 UTC (permalink / raw)
To: Pranith Kumar; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 02:33 AM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 11:18 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>> On 03/16/2015 11:12 PM, Pranith Kumar wrote:
>>> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>>> What is your init?
>>>>>
>>>>> I am using systemd from debian unstable.
>>>>
>>>> Do you have a stdout-path property defined in your dts to a serial
>>>> console you're not actually using?
>>>>
>>>
>>> I am using tty0 as my console. From the config which I posted, it has:
>>>
>>> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>>>
>>> I am not using any device tree file.
>>
>> Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
>> changes I made, so I thought I'd check if that might have affected
>> your setup as well.
>>
>
> And the painful slow bisecting did lead to that commit:
>
> Bisecting: 0 revisions left to test after this (roughly 0 steps)
> [2fa645cb2703d9b3786d850db815414dfeefa51d] of: Fix premature
> bootconsole disable with 'stdout-path'
>
> $ git show 2fa645cb2703d9b3786d850db815414dfeefa51d
> commit 2fa645cb2703d9b3786d850db815414dfeefa51d
> Author: Peter Hurley <peter@hurleysoftware.com>
> Date: Sun Mar 1 12:21:22 2015 -0500
>
> of: Fix premature bootconsole disable with 'stdout-path'
Can you send me a complete dmesg capture from a boot with
this commit reverted?
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 20:03 ` Peter Hurley
0 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:03 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 02:33 AM, Pranith Kumar wrote:
> On Mon, Mar 16, 2015 at 11:18 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>> On 03/16/2015 11:12 PM, Pranith Kumar wrote:
>>> On Mon, Mar 16, 2015 at 10:58 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>>> What is your init?
>>>>>
>>>>> I am using systemd from debian unstable.
>>>>
>>>> Do you have a stdout-path property defined in your dts to a serial
>>>> console you're not actually using?
>>>>
>>>
>>> I am using tty0 as my console. From the config which I posted, it has:
>>>
>>> CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
>>>
>>> I am not using any device tree file.
>>
>> Ok; there was some reported breakage on PowerMac wrt to 'stdout-path'
>> changes I made, so I thought I'd check if that might have affected
>> your setup as well.
>>
>
> And the painful slow bisecting did lead to that commit:
>
> Bisecting: 0 revisions left to test after this (roughly 0 steps)
> [2fa645cb2703d9b3786d850db815414dfeefa51d] of: Fix premature
> bootconsole disable with 'stdout-path'
>
> $ git show 2fa645cb2703d9b3786d850db815414dfeefa51d
> commit 2fa645cb2703d9b3786d850db815414dfeefa51d
> Author: Peter Hurley <peter@hurleysoftware.com>
> Date: Sun Mar 1 12:21:22 2015 -0500
>
> of: Fix premature bootconsole disable with 'stdout-path'
Can you send me a complete dmesg capture from a boot with
this commit reverted?
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 20:03 ` Peter Hurley
@ 2015-03-17 20:07 ` Pranith Kumar
-1 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 20:07 UTC (permalink / raw)
To: Peter Hurley; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>
> Can you send me a complete dmesg capture from a boot with
> this commit reverted?
>
Here it is. Let me know if you want any boot options enabled. I
removed both debug and verbose boot options.
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-rc4+ (pranith@macmini) (gcc version
4.9.2 (Debian 4.9.2-10) ) #67 Tue Mar 17 12:40:16 EDT 2015
[ 0.000000] Found initrd at 0xc1300000:0xc1692000
[ 0.000000] Found UniNorth memory controller & host bridge @
0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Mac mini (Late 2005)
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 55
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c05a4a64,
node_mem_map ef6e3000
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 260416
[ 0.000000] Kernel command line:
root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
video=offb:off radeon.modeset=1 radeon.agpmode=-1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 1026292K/1048576K available (3980K kernel code,
212K rwdata, 1384K rodata, 240K init, 294K bss, 22284K reserved, 0K
cma-reserved, 262144K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdde4000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdde4000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at
80040000, max 1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] time_init: decrementer frequency = 41.600571 MHz
[ 0.000000] time_init: processor frequency = 1333.333328 MHz
[ 0.000008] clocksource: timebase mult[1809c2fe] shift[24] registered
[ 0.000394] clockevent: decrementer mult[aa655c4] shift[32] cpu[0]
[ 0.000647] Console: colour dummy device 80x25
[ 0.000998] console [tty0] enabled
[ 0.001333] bootconsole [udbg0] disabled
[ 0.001859] pid_max: default: 32768 minimum: 301
[ 0.001902] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001913] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002312] Initializing cgroup subsys blkio
[ 0.002330] Initializing cgroup subsys memory
[ 0.002357] Initializing cgroup subsys devices
[ 0.002367] Initializing cgroup subsys freezer
[ 0.002379] Initializing cgroup subsys net_cls
[ 0.002391] Initializing cgroup subsys perf_event
[ 0.002554] MPC7450 family performance monitor hardware support registered
[ 0.003094] devtmpfs: initialized
[ 0.004054] device-tree: Duplicate name in PowerPC,G4@0, renamed to
"l2-cache#1"
[ 0.008227] NET: Registered protocol family 16
[ 0.009172] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.009186] channel 0 bus <multibus>
[ 0.009193] channel 1 bus <multibus>
[ 0.009296] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.009307] channel 0 bus <multibus>
[ 0.009332] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.009341] channel 1 bus <multibus>
[ 0.009348] channel 2 bus <multibus>
[ 0.009779] PCI: Probing PCI hardware
[ 0.009931] PCI host bridge to bus 0000:00
[ 0.009952] pci_bus 0000:00: root bus resource [io
0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.009971] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.009985] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
[ 0.009999] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.010014] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.010043] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.010224] pci 0000:00:10.0: [1002:5962] type 00 class 0x030000
[ 0.010243] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref]
[ 0.010253] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff]
[ 0.010263] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff]
[ 0.010286] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.010319] pci 0000:00:10.0: supports D1 D2
[ 0.010544] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.010669] PCI host bridge to bus 0001:10
[ 0.010684] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.010697] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.010711] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.010725] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.010738] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.010759] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.010936] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[ 0.010951] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.011121] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310
[ 0.011135] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.011292] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[ 0.011307] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.011454] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[ 0.011468] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff]
[ 0.011626] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.011643] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff]
[ 0.011696] pci 0001:10:1b.0: supports D1 D2
[ 0.011702] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011857] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.011873] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.011926] pci 0001:10:1b.1: supports D1 D2
[ 0.011931] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012083] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.012099] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[ 0.012152] pci 0001:10:1b.2: supports D1 D2
[ 0.012157] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012390] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
[ 0.012506] PCI host bridge to bus 0002:20
[ 0.012524] pci_bus 0002:20: root bus resource [io
0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.012542] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.012556] pci_bus 0002:20: root bus resource [bus 20-ff]
[ 0.012569] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
[ 0.012591] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
[ 0.012754] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000
[ 0.012766] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[ 0.012911] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.012925] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.012964] pci 0002:20:0e.0: supports D1 D2
[ 0.012970] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.013117] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
[ 0.013131] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.013160] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.013352] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
[ 0.013414] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.013429] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.013435] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.013440] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
[ 0.013449] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.013455] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.013461] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.013468] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.013474] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.016908] vgaarb: device added:
PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.016939] vgaarb: loaded
[ 0.016947] vgaarb: bridge control possible 0000:00:10.0
[ 0.017285] SCSI subsystem initialized
[ 0.017395] libata version 3.00 loaded.
[ 0.017468] pps_core: LinuxPPS API ver. 1 registered
[ 0.017480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.017509] PTP clock support registered
[ 0.018107] Switched to clocksource timebase
[ 0.023597] NET: Registered protocol family 2
[ 0.024136] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.024199] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.024253] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.024376] TCP: reno registered
[ 0.024391] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.024414] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.024658] NET: Registered protocol family 1
[ 0.024731] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 0.024748] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.024764] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 0.024776] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.024799] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[ 0.088154] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.148120] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.208119] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.208157] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.208306] Unpacking initramfs...
[ 0.340122] Freeing initrd memory: 3656K (c1300000 - c1692000)
[ 0.340497] Thermal assist unit not available
[ 0.341193] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.341250] audit: initializing netlink subsys (disabled)
[ 0.341309] audit: type=2000 audit(1426614345.330:1): initialized
[ 0.341757] zpool: loaded
[ 0.341886] VFS: Disk quotas dquot_6.5.2
[ 0.341920] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.342436] bounce: pool size: 64 pages
[ 0.342480] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 251)
[ 0.342576] io scheduler noop registered
[ 0.342592] io scheduler deadline registered
[ 0.342612] io scheduler cfq registered (default)
[ 0.343269] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.344448] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh@kernel.crashing.org>)
[ 0.344575] Serial: MPC52xx PSC UART driver
[ 0.344626] Linux agpgart interface v0.103
[ 0.344665] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 0.345705] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 0.345814] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 0.346051] MacIO PCI driver attached to Intrepid chipset
[ 0.347005] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.347414] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.348288] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
[ 0.348419] adb: starting probe task...
[ 0.348433] adb: finished probe task...
[ 0.368129] pata-pci-macio 0002:20:0d.0: Activating pata-macio
chipset UniNorth ATA-6, Apple bus ID 3
[ 0.368811] scsi host0: pata_macio
[ 0.369038] ata1: PATA max UDMA/100 irq 39
[ 0.568442] ata1.00: ATA-6: ST9402115A, 3.01, max UDMA/100
[ 0.568460] ata1.00: 78140160 sectors, multi 16: LBA48
[ 0.568480] ata1.01: ATAPI: MATSHITADVD-R UJ-845, D8PB, max UDMA/66
[ 0.608368] ata1.00: configured for UDMA/100
[ 0.648403] ata1.01: configured for UDMA/66
[ 0.651024] scsi 0:0:0:0: Direct-Access ATA ST9402115A
3.01 PQ: 0 ANSI: 5
[ 0.653249] scsi 0:0:1:0: CD-ROM MATSHITA DVD-R UJ-845
D8PB PQ: 0 ANSI: 5
[ 1.398123] pata-macio 0.00020000:ata-3: Activating pata-macio
chipset KeyLargo ATA-3, Apple bus ID 0
[ 1.398758] scsi host1: pata_macio
[ 1.398978] ata2: PATA max MWDMA2 irq 24
[ 1.399043] Intel(R) Ethernet Switch Host Interface Driver - version 0.12.2-k
[ 1.399055] Copyright (c) 2013 Intel Corporation.
[ 1.399587] mousedev: PS/2 mouse device common for all mice
[ 1.399845] PowerMac i2c bus pmu 2 registered
[ 1.399921] PowerMac i2c bus pmu 1 registered
[ 1.400121] PowerMac i2c bus mac-io 0 registered
[ 1.400192] PowerMac i2c bus uni-n 1 registered
[ 1.400206] i2c i2c-3: i2c-powermac: modalias failure on
/uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 1.400345] PowerMac i2c bus uni-n 0 registered
[ 1.400610] TCP: cubic registered
[ 1.400642] NET: Registered protocol family 10
[ 1.401336] mip6: Mobile IPv6
[ 1.401357] NET: Registered protocol family 17
[ 1.402019] registered taskstats version 1
[ 1.402564] input: PMU as /devices/virtual/input/input0
[ 1.558522] Freeing unused kernel memory: 240K (c0541000 - c057d000)
[ 1.618657] systemd-udevd[60]: starting version 215
[ 1.619943] random: systemd-udevd urandom read with 0 bits of
entropy available
[ 1.667597] usbcore: registered new interface driver usbfs
[ 1.667667] usbcore: registered new interface driver hub
[ 1.700832] usbcore: registered new device driver usb
[ 1.702392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.704097] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.705083] ehci-pci: EHCI PCI platform driver
[ 1.705198] ehci-pci 0001:10:1b.2: EHCI Host Controller
[ 1.705228] ehci-pci 0001:10:1b.2: new USB bus registered, assigned
bus number 1
[ 1.705327] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000
[ 1.712016] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks:
(40.0 GB/37.2 GiB)
[ 1.712154] sd 0:0:0:0: [sda] Write Protect is off
[ 1.712169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712216] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.718744] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 1.719218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.719237] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.719253] usb usb1: Product: EHCI Host Controller
[ 1.719264] usb usb1: Manufacturer: Linux 4.0.0-rc4+ ehci_hcd
[ 1.719276] usb usb1: SerialNumber: 0001:10:1b.2
[ 1.726944] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 1.727824] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT
Ethernet 00:14:51:15:c1:8c
[ 1.738352] hub 1-0:1.0: USB hub found
[ 1.738408] hub 1-0:1.0: 5 ports detected
[ 1.743409] ohci-pci: OHCI PCI platform driver
[ 1.743474] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 1.743507] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 1.743575] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[ 1.743605] ohci-pci 0001:10:1a.0: new USB bus registered, assigned
bus number 2
[ 1.745446] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000
[ 1.745983] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 1.749236] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 1.752085] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.754597] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw
xa/form2 cdda tray
[ 1.754631] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.756068] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.757531] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.757685] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.818204] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.870606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.870639] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.870655] usb usb2: Product: OHCI PCI host controller
[ 1.870667] usb usb2: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 1.870679] usb usb2: SerialNumber: 0001:10:1a.0
[ 1.871680] hub 2-0:1.0: USB hub found
[ 1.871720] hub 2-0:1.0: 2 ports detected
[ 1.872763] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[ 1.872799] ohci-pci 0001:10:1b.0: new USB bus registered, assigned
bus number 3
[ 1.872846] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000
[ 1.947975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.948008] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.948024] usb usb3: Product: OHCI PCI host controller
[ 1.948036] usb usb3: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 1.948047] usb usb3: SerialNumber: 0001:10:1b.0
[ 1.949458] hub 3-0:1.0: USB hub found
[ 1.949496] hub 3-0:1.0: 3 ports detected
[ 1.950427] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[ 1.950463] ohci-pci 0001:10:1b.1: new USB bus registered, assigned
bus number 4
[ 1.950511] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000
[ 2.027984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.028016] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.028031] usb usb4: Product: OHCI PCI host controller
[ 2.028043] usb usb4: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 2.028055] usb usb4: SerialNumber: 0001:10:1b.1
[ 2.029916] hub 4-0:1.0: USB hub found
[ 2.029957] hub 4-0:1.0: 2 ports detected
[ 2.318358] firewire_core 0002:20:0e.0: created device fw0: GUID
001451fffe15c18c, S400
[ 2.509703] PM: Starting manual resume from disk
[ 3.038249] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.409381] systemd[1]: systemd 215 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ
-SECCOMP -APPARMOR)
[ 4.409622] systemd[1]: Detected architecture 'ppc'.
[ 4.666761] systemd[1]: Failed to insert module 'autofs4'
[ 4.677729] systemd[1]: Set hostname to <macmini>.
[ 7.891487] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 7.892103] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 7.892181] systemd[1]: Starting Remote File Systems (Pre).
[ 7.892749] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.892836] systemd[1]: Starting Encrypted Volumes.
[ 7.892987] systemd[1]: Reached target Encrypted Volumes.
[ 7.893060] systemd[1]: Starting Dispatch Password Requests to
Console Directory Watch.
[ 7.893197] systemd[1]: Started Dispatch Password Requests to
Console Directory Watch.
[ 7.893241] systemd[1]: Starting Paths.
[ 7.893366] systemd[1]: Reached target Paths.
[ 7.893447] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 7.893492] systemd[1]: Expecting device
dev-disk-by\x2duuid-1d89acda\x2d332d\x2d4fc9\x2da52f\x2d62e820d09baf.device...
[ 7.893638] systemd[1]: Starting Root Slice.
[ 7.912930] systemd[1]: Created slice Root Slice.
[ 7.913017] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.913297] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.913349] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.913543] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.913589] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.913779] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.913829] systemd[1]: Starting Syslog Socket.
[ 7.913966] systemd[1]: Listening on Syslog Socket.
[ 7.914009] systemd[1]: Starting User and Session Slice.
[ 7.914858] systemd[1]: Created slice User and Session Slice.
[ 7.914938] systemd[1]: Starting udev Control Socket.
[ 7.915114] systemd[1]: Listening on udev Control Socket.
[ 7.915169] systemd[1]: Starting udev Kernel Socket.
[ 7.915327] systemd[1]: Listening on udev Kernel Socket.
[ 7.915392] systemd[1]: Starting Journal Socket.
[ 7.915666] systemd[1]: Listening on Journal Socket.
[ 7.915765] systemd[1]: Starting System Slice.
[ 7.916354] systemd[1]: Created slice System Slice.
[ 7.916433] systemd[1]: Starting File System Check on Root Device...
[ 7.919464] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.922804] systemd[1]: Mounted Huge Pages File System.
[ 7.923205] systemd[1]: Mounted Debug File System.
[ 7.993560] systemd[1]: Starting Load Kernel Modules...
[ 7.997050] systemd[1]: Starting udev Coldplug all Devices...
[ 8.009743] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.010122] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 8.013749] systemd[1]: Starting system-getty.slice.
[ 8.017656] systemd[1]: Created slice system-getty.slice.
[ 8.017791] systemd[1]: Starting Journal Service...
[ 8.021297] systemd[1]: Started Journal Service.
[ 8.301305] loop: module loaded
[ 8.747714] snd-powermac no longer handles any machines with a
layout-id property in the device-tree, use snd-aoa.
[ 8.758157] systemd[1]: Unit systemd-modules-load.service entered
failed state.
[ 8.906915] random: nonblocking pool is initialized
[ 10.253925] systemd-udevd[150]: starting version 215
[ 11.462987] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 12.020462] systemd-journald[133]: Received request to flush
runtime journal from PID 1
[ 12.937161] [drm] Initialized drm 1.1.0 20060810
[ 13.497021] [drm] radeon kernel modesetting enabled.
[ 13.498718] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.499903] [drm] initializing kernel modesetting (RV280
0x1002:0x5962 0x1002:0x5962).
[ 13.499935] [drm] Forcing AGP to PCI mode
[ 13.499955] [drm] register mmio base: 0x90000000
[ 13.499964] [drm] register mmio size: 65536
[ 13.500038] radeon 0000:00:10.0: Invalid ROM contents
[ 13.500062] radeon 0000:00:10.0: Invalid ROM contents
[ 13.500297] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate
a BIOS ROM
[ 13.500326] [drm] Using device-tree clock info
[ 13.500338] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.500355] radeon 0000:00:10.0: VRAM: 128M 0x0000000098000000 -
0x000000009FFFFFFF (32M used)
[ 13.500374] radeon 0000:00:10.0: GTT: 512M 0x0000000078000000 -
0x0000000097FFFFFF
[ 13.500392] [drm] Detected VRAM RAM=128M, BAR=128M
[ 13.500403] [drm] RAM width 64bits DDR
[ 13.500582] [TTM] Zone kernel: Available graphics memory: 384022 kiB
[ 13.500598] [TTM] Zone highmem: Available graphics memory: 515094 kiB
[ 13.500609] [TTM] Initializing pool allocator
[ 13.501225] [drm] radeon: 32M of VRAM memory ready
[ 13.501245] [drm] radeon: 512M of GTT memory ready.
[ 13.501264] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.505037] [drm] PCI GART of 512M enabled (table at 0x000000002D700000).
[ 13.505624] radeon 0000:00:10.0: WB disabled
[ 13.505653] radeon 0000:00:10.0: fence driver on ring 0 use gpu
addr 0x0000000078000000 and cpu addr 0xed42c000
[ 13.505761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.505772] [drm] Driver supports precise vblank timestamp query.
[ 13.506151] [drm] radeon: irq initialized.
[ 13.506165] [drm] Loading R200 Microcode
[ 13.823512] [drm] radeon: ring at 0x0000000078001000
[ 13.823569] [drm] ring test succeeded in 0 usecs
[ 13.823859] f 0#1: signaled from fence_wait
[ 13.823871] [drm] ib test succeeded in 0 usecs
[ 13.825736] [drm] Connector Table: 6 (mini external tmds)
[ 13.825774] [drm] No valid Ext TMDS info found in BIOS
[ 13.825790] [drm] No TV DAC info found in BIOS
[ 13.827398] [drm] Radeon Display Connectors
[ 13.827420] [drm] Connector 0:
[ 13.827428] [drm] DVI-I-1
[ 13.827436] [drm] HPD2
[ 13.827446] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 13.827456] [drm] Encoders:
[ 13.827464] [drm] DFP2: INTERNAL_DVO1
[ 13.827473] [drm] CRT2: INTERNAL_DAC2
[ 13.827482] [drm] Connector 1:
[ 13.827489] [drm] SVIDEO-1
[ 13.827497] [drm] Encoders:
[ 13.827505] [drm] TV1: INTERNAL_DAC2
[ 13.887813] [drm] fb mappable at 0x98040000
[ 13.887843] [drm] vram apper at 0x98000000
[ 13.887852] [drm] size 2076672
[ 13.887860] [drm] fb depth is 8
[ 13.887867] [drm] pitch is 1920
[ 13.942054] Console: switching to colour frame buffer device 240x67
[ 13.954601] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[ 13.954669] radeon 0000:00:10.0: registered panic notifier
[ 13.954737] [drm] Initialized radeon 2.41.0 20080528 for
0000:00:10.0 on minor 0
[ 15.438721] Adding 1650120k swap on /dev/sda4. Priority:-1
extents:1 across:1650120k FS
[ 15.778460] sungem_phy: PHY ID: 4061e4, addr: 0
[ 15.778814] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
[ 15.779140] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.178268] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 18.178471] gem 0002:20:0f.0 eth0: Pause is disabled
[ 18.181207] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.372879] Process accounting resumed
[ 24.367106] input: Mouseemu virtual keyboard as /devices/virtual/input/input1
[ 24.381877] input: Mouseemu virtual mouse as /devices/virtual/input/input2
[ 37.046306] f 0#3: signaled from radeon_fence_signaled
[ 38.339580] f 0#8: armed on ring 0!
[ 38.372725] f 0#8: signaled from irq context
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 20:07 ` Pranith Kumar
0 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 20:07 UTC (permalink / raw)
To: Peter Hurley; +Cc: open list:LINUX FOR POWERPC..., LKML
On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>
> Can you send me a complete dmesg capture from a boot with
> this commit reverted?
>
Here it is. Let me know if you want any boot options enabled. I
removed both debug and verbose boot options.
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-rc4+ (pranith@macmini) (gcc version
4.9.2 (Debian 4.9.2-10) ) #67 Tue Mar 17 12:40:16 EDT 2015
[ 0.000000] Found initrd at 0xc1300000:0xc1692000
[ 0.000000] Found UniNorth memory controller & host bridge @
0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Mac mini (Late 2005)
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 55
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c05a4a64,
node_mem_map ef6e3000
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 260416
[ 0.000000] Kernel command line:
root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
video=offb:off radeon.modeset=1 radeon.agpmode=-1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 1026292K/1048576K available (3980K kernel code,
212K rwdata, 1384K rodata, 240K init, 294K bss, 22284K reserved, 0K
cma-reserved, 262144K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdde4000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdde4000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at
80040000, max 1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] time_init: decrementer frequency = 41.600571 MHz
[ 0.000000] time_init: processor frequency = 1333.333328 MHz
[ 0.000008] clocksource: timebase mult[1809c2fe] shift[24] registered
[ 0.000394] clockevent: decrementer mult[aa655c4] shift[32] cpu[0]
[ 0.000647] Console: colour dummy device 80x25
[ 0.000998] console [tty0] enabled
[ 0.001333] bootconsole [udbg0] disabled
[ 0.001859] pid_max: default: 32768 minimum: 301
[ 0.001902] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001913] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002312] Initializing cgroup subsys blkio
[ 0.002330] Initializing cgroup subsys memory
[ 0.002357] Initializing cgroup subsys devices
[ 0.002367] Initializing cgroup subsys freezer
[ 0.002379] Initializing cgroup subsys net_cls
[ 0.002391] Initializing cgroup subsys perf_event
[ 0.002554] MPC7450 family performance monitor hardware support registered
[ 0.003094] devtmpfs: initialized
[ 0.004054] device-tree: Duplicate name in PowerPC,G4@0, renamed to
"l2-cache#1"
[ 0.008227] NET: Registered protocol family 16
[ 0.009172] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.009186] channel 0 bus <multibus>
[ 0.009193] channel 1 bus <multibus>
[ 0.009296] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.009307] channel 0 bus <multibus>
[ 0.009332] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.009341] channel 1 bus <multibus>
[ 0.009348] channel 2 bus <multibus>
[ 0.009779] PCI: Probing PCI hardware
[ 0.009931] PCI host bridge to bus 0000:00
[ 0.009952] pci_bus 0000:00: root bus resource [io
0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.009971] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.009985] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
[ 0.009999] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.010014] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.010043] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.010224] pci 0000:00:10.0: [1002:5962] type 00 class 0x030000
[ 0.010243] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref]
[ 0.010253] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff]
[ 0.010263] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff]
[ 0.010286] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.010319] pci 0000:00:10.0: supports D1 D2
[ 0.010544] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.010669] PCI host bridge to bus 0001:10
[ 0.010684] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.010697] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.010711] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.010725] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.010738] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.010759] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.010936] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[ 0.010951] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.011121] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310
[ 0.011135] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.011292] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[ 0.011307] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.011454] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[ 0.011468] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff]
[ 0.011626] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.011643] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff]
[ 0.011696] pci 0001:10:1b.0: supports D1 D2
[ 0.011702] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011857] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.011873] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.011926] pci 0001:10:1b.1: supports D1 D2
[ 0.011931] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012083] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.012099] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[ 0.012152] pci 0001:10:1b.2: supports D1 D2
[ 0.012157] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.012390] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
[ 0.012506] PCI host bridge to bus 0002:20
[ 0.012524] pci_bus 0002:20: root bus resource [io
0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.012542] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.012556] pci_bus 0002:20: root bus resource [bus 20-ff]
[ 0.012569] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
[ 0.012591] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
[ 0.012754] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000
[ 0.012766] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[ 0.012911] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.012925] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.012964] pci 0002:20:0e.0: supports D1 D2
[ 0.012970] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.013117] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
[ 0.013131] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.013160] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.013352] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
[ 0.013414] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.013429] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.013435] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.013440] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
[ 0.013449] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.013455] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.013461] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.013468] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.013474] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.016908] vgaarb: device added:
PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.016939] vgaarb: loaded
[ 0.016947] vgaarb: bridge control possible 0000:00:10.0
[ 0.017285] SCSI subsystem initialized
[ 0.017395] libata version 3.00 loaded.
[ 0.017468] pps_core: LinuxPPS API ver. 1 registered
[ 0.017480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.017509] PTP clock support registered
[ 0.018107] Switched to clocksource timebase
[ 0.023597] NET: Registered protocol family 2
[ 0.024136] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.024199] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.024253] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.024376] TCP: reno registered
[ 0.024391] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.024414] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.024658] NET: Registered protocol family 1
[ 0.024731] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 0.024748] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.024764] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 0.024776] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.024799] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[ 0.088154] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.148120] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.208119] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.208157] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.208306] Unpacking initramfs...
[ 0.340122] Freeing initrd memory: 3656K (c1300000 - c1692000)
[ 0.340497] Thermal assist unit not available
[ 0.341193] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.341250] audit: initializing netlink subsys (disabled)
[ 0.341309] audit: type=2000 audit(1426614345.330:1): initialized
[ 0.341757] zpool: loaded
[ 0.341886] VFS: Disk quotas dquot_6.5.2
[ 0.341920] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.342436] bounce: pool size: 64 pages
[ 0.342480] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 251)
[ 0.342576] io scheduler noop registered
[ 0.342592] io scheduler deadline registered
[ 0.342612] io scheduler cfq registered (default)
[ 0.343269] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.344448] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh@kernel.crashing.org>)
[ 0.344575] Serial: MPC52xx PSC UART driver
[ 0.344626] Linux agpgart interface v0.103
[ 0.344665] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 0.345705] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 0.345814] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 0.346051] MacIO PCI driver attached to Intrepid chipset
[ 0.347005] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.347414] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.348288] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
[ 0.348419] adb: starting probe task...
[ 0.348433] adb: finished probe task...
[ 0.368129] pata-pci-macio 0002:20:0d.0: Activating pata-macio
chipset UniNorth ATA-6, Apple bus ID 3
[ 0.368811] scsi host0: pata_macio
[ 0.369038] ata1: PATA max UDMA/100 irq 39
[ 0.568442] ata1.00: ATA-6: ST9402115A, 3.01, max UDMA/100
[ 0.568460] ata1.00: 78140160 sectors, multi 16: LBA48
[ 0.568480] ata1.01: ATAPI: MATSHITADVD-R UJ-845, D8PB, max UDMA/66
[ 0.608368] ata1.00: configured for UDMA/100
[ 0.648403] ata1.01: configured for UDMA/66
[ 0.651024] scsi 0:0:0:0: Direct-Access ATA ST9402115A
3.01 PQ: 0 ANSI: 5
[ 0.653249] scsi 0:0:1:0: CD-ROM MATSHITA DVD-R UJ-845
D8PB PQ: 0 ANSI: 5
[ 1.398123] pata-macio 0.00020000:ata-3: Activating pata-macio
chipset KeyLargo ATA-3, Apple bus ID 0
[ 1.398758] scsi host1: pata_macio
[ 1.398978] ata2: PATA max MWDMA2 irq 24
[ 1.399043] Intel(R) Ethernet Switch Host Interface Driver - version 0.12.2-k
[ 1.399055] Copyright (c) 2013 Intel Corporation.
[ 1.399587] mousedev: PS/2 mouse device common for all mice
[ 1.399845] PowerMac i2c bus pmu 2 registered
[ 1.399921] PowerMac i2c bus pmu 1 registered
[ 1.400121] PowerMac i2c bus mac-io 0 registered
[ 1.400192] PowerMac i2c bus uni-n 1 registered
[ 1.400206] i2c i2c-3: i2c-powermac: modalias failure on
/uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 1.400345] PowerMac i2c bus uni-n 0 registered
[ 1.400610] TCP: cubic registered
[ 1.400642] NET: Registered protocol family 10
[ 1.401336] mip6: Mobile IPv6
[ 1.401357] NET: Registered protocol family 17
[ 1.402019] registered taskstats version 1
[ 1.402564] input: PMU as /devices/virtual/input/input0
[ 1.558522] Freeing unused kernel memory: 240K (c0541000 - c057d000)
[ 1.618657] systemd-udevd[60]: starting version 215
[ 1.619943] random: systemd-udevd urandom read with 0 bits of
entropy available
[ 1.667597] usbcore: registered new interface driver usbfs
[ 1.667667] usbcore: registered new interface driver hub
[ 1.700832] usbcore: registered new device driver usb
[ 1.702392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.704097] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.705083] ehci-pci: EHCI PCI platform driver
[ 1.705198] ehci-pci 0001:10:1b.2: EHCI Host Controller
[ 1.705228] ehci-pci 0001:10:1b.2: new USB bus registered, assigned
bus number 1
[ 1.705327] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000
[ 1.712016] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks:
(40.0 GB/37.2 GiB)
[ 1.712154] sd 0:0:0:0: [sda] Write Protect is off
[ 1.712169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712216] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.718744] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 1.719218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.719237] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.719253] usb usb1: Product: EHCI Host Controller
[ 1.719264] usb usb1: Manufacturer: Linux 4.0.0-rc4+ ehci_hcd
[ 1.719276] usb usb1: SerialNumber: 0001:10:1b.2
[ 1.726944] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 1.727824] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT
Ethernet 00:14:51:15:c1:8c
[ 1.738352] hub 1-0:1.0: USB hub found
[ 1.738408] hub 1-0:1.0: 5 ports detected
[ 1.743409] ohci-pci: OHCI PCI platform driver
[ 1.743474] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 1.743507] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 1.743575] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[ 1.743605] ohci-pci 0001:10:1a.0: new USB bus registered, assigned
bus number 2
[ 1.745446] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000
[ 1.745983] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 1.749236] sda: [mac] sda1 sda2 sda3 sda4 sda5
[ 1.752085] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.754597] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw
xa/form2 cdda tray
[ 1.754631] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.756068] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.757531] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.757685] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.818204] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.870606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.870639] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.870655] usb usb2: Product: OHCI PCI host controller
[ 1.870667] usb usb2: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 1.870679] usb usb2: SerialNumber: 0001:10:1a.0
[ 1.871680] hub 2-0:1.0: USB hub found
[ 1.871720] hub 2-0:1.0: 2 ports detected
[ 1.872763] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[ 1.872799] ohci-pci 0001:10:1b.0: new USB bus registered, assigned
bus number 3
[ 1.872846] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000
[ 1.947975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.948008] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.948024] usb usb3: Product: OHCI PCI host controller
[ 1.948036] usb usb3: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 1.948047] usb usb3: SerialNumber: 0001:10:1b.0
[ 1.949458] hub 3-0:1.0: USB hub found
[ 1.949496] hub 3-0:1.0: 3 ports detected
[ 1.950427] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[ 1.950463] ohci-pci 0001:10:1b.1: new USB bus registered, assigned
bus number 4
[ 1.950511] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000
[ 2.027984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.028016] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.028031] usb usb4: Product: OHCI PCI host controller
[ 2.028043] usb usb4: Manufacturer: Linux 4.0.0-rc4+ ohci_hcd
[ 2.028055] usb usb4: SerialNumber: 0001:10:1b.1
[ 2.029916] hub 4-0:1.0: USB hub found
[ 2.029957] hub 4-0:1.0: 2 ports detected
[ 2.318358] firewire_core 0002:20:0e.0: created device fw0: GUID
001451fffe15c18c, S400
[ 2.509703] PM: Starting manual resume from disk
[ 3.038249] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.409381] systemd[1]: systemd 215 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ
-SECCOMP -APPARMOR)
[ 4.409622] systemd[1]: Detected architecture 'ppc'.
[ 4.666761] systemd[1]: Failed to insert module 'autofs4'
[ 4.677729] systemd[1]: Set hostname to <macmini>.
[ 7.891487] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 7.892103] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 7.892181] systemd[1]: Starting Remote File Systems (Pre).
[ 7.892749] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.892836] systemd[1]: Starting Encrypted Volumes.
[ 7.892987] systemd[1]: Reached target Encrypted Volumes.
[ 7.893060] systemd[1]: Starting Dispatch Password Requests to
Console Directory Watch.
[ 7.893197] systemd[1]: Started Dispatch Password Requests to
Console Directory Watch.
[ 7.893241] systemd[1]: Starting Paths.
[ 7.893366] systemd[1]: Reached target Paths.
[ 7.893447] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 7.893492] systemd[1]: Expecting device
dev-disk-by\x2duuid-1d89acda\x2d332d\x2d4fc9\x2da52f\x2d62e820d09baf.device...
[ 7.893638] systemd[1]: Starting Root Slice.
[ 7.912930] systemd[1]: Created slice Root Slice.
[ 7.913017] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.913297] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.913349] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.913543] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.913589] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.913779] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.913829] systemd[1]: Starting Syslog Socket.
[ 7.913966] systemd[1]: Listening on Syslog Socket.
[ 7.914009] systemd[1]: Starting User and Session Slice.
[ 7.914858] systemd[1]: Created slice User and Session Slice.
[ 7.914938] systemd[1]: Starting udev Control Socket.
[ 7.915114] systemd[1]: Listening on udev Control Socket.
[ 7.915169] systemd[1]: Starting udev Kernel Socket.
[ 7.915327] systemd[1]: Listening on udev Kernel Socket.
[ 7.915392] systemd[1]: Starting Journal Socket.
[ 7.915666] systemd[1]: Listening on Journal Socket.
[ 7.915765] systemd[1]: Starting System Slice.
[ 7.916354] systemd[1]: Created slice System Slice.
[ 7.916433] systemd[1]: Starting File System Check on Root Device...
[ 7.919464] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.922804] systemd[1]: Mounted Huge Pages File System.
[ 7.923205] systemd[1]: Mounted Debug File System.
[ 7.993560] systemd[1]: Starting Load Kernel Modules...
[ 7.997050] systemd[1]: Starting udev Coldplug all Devices...
[ 8.009743] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.010122] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 8.013749] systemd[1]: Starting system-getty.slice.
[ 8.017656] systemd[1]: Created slice system-getty.slice.
[ 8.017791] systemd[1]: Starting Journal Service...
[ 8.021297] systemd[1]: Started Journal Service.
[ 8.301305] loop: module loaded
[ 8.747714] snd-powermac no longer handles any machines with a
layout-id property in the device-tree, use snd-aoa.
[ 8.758157] systemd[1]: Unit systemd-modules-load.service entered
failed state.
[ 8.906915] random: nonblocking pool is initialized
[ 10.253925] systemd-udevd[150]: starting version 215
[ 11.462987] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 12.020462] systemd-journald[133]: Received request to flush
runtime journal from PID 1
[ 12.937161] [drm] Initialized drm 1.1.0 20060810
[ 13.497021] [drm] radeon kernel modesetting enabled.
[ 13.498718] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.499903] [drm] initializing kernel modesetting (RV280
0x1002:0x5962 0x1002:0x5962).
[ 13.499935] [drm] Forcing AGP to PCI mode
[ 13.499955] [drm] register mmio base: 0x90000000
[ 13.499964] [drm] register mmio size: 65536
[ 13.500038] radeon 0000:00:10.0: Invalid ROM contents
[ 13.500062] radeon 0000:00:10.0: Invalid ROM contents
[ 13.500297] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate
a BIOS ROM
[ 13.500326] [drm] Using device-tree clock info
[ 13.500338] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.500355] radeon 0000:00:10.0: VRAM: 128M 0x0000000098000000 -
0x000000009FFFFFFF (32M used)
[ 13.500374] radeon 0000:00:10.0: GTT: 512M 0x0000000078000000 -
0x0000000097FFFFFF
[ 13.500392] [drm] Detected VRAM RAM=128M, BAR=128M
[ 13.500403] [drm] RAM width 64bits DDR
[ 13.500582] [TTM] Zone kernel: Available graphics memory: 384022 kiB
[ 13.500598] [TTM] Zone highmem: Available graphics memory: 515094 kiB
[ 13.500609] [TTM] Initializing pool allocator
[ 13.501225] [drm] radeon: 32M of VRAM memory ready
[ 13.501245] [drm] radeon: 512M of GTT memory ready.
[ 13.501264] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.505037] [drm] PCI GART of 512M enabled (table at 0x000000002D700000).
[ 13.505624] radeon 0000:00:10.0: WB disabled
[ 13.505653] radeon 0000:00:10.0: fence driver on ring 0 use gpu
addr 0x0000000078000000 and cpu addr 0xed42c000
[ 13.505761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.505772] [drm] Driver supports precise vblank timestamp query.
[ 13.506151] [drm] radeon: irq initialized.
[ 13.506165] [drm] Loading R200 Microcode
[ 13.823512] [drm] radeon: ring at 0x0000000078001000
[ 13.823569] [drm] ring test succeeded in 0 usecs
[ 13.823859] f 0#1: signaled from fence_wait
[ 13.823871] [drm] ib test succeeded in 0 usecs
[ 13.825736] [drm] Connector Table: 6 (mini external tmds)
[ 13.825774] [drm] No valid Ext TMDS info found in BIOS
[ 13.825790] [drm] No TV DAC info found in BIOS
[ 13.827398] [drm] Radeon Display Connectors
[ 13.827420] [drm] Connector 0:
[ 13.827428] [drm] DVI-I-1
[ 13.827436] [drm] HPD2
[ 13.827446] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 13.827456] [drm] Encoders:
[ 13.827464] [drm] DFP2: INTERNAL_DVO1
[ 13.827473] [drm] CRT2: INTERNAL_DAC2
[ 13.827482] [drm] Connector 1:
[ 13.827489] [drm] SVIDEO-1
[ 13.827497] [drm] Encoders:
[ 13.827505] [drm] TV1: INTERNAL_DAC2
[ 13.887813] [drm] fb mappable at 0x98040000
[ 13.887843] [drm] vram apper at 0x98000000
[ 13.887852] [drm] size 2076672
[ 13.887860] [drm] fb depth is 8
[ 13.887867] [drm] pitch is 1920
[ 13.942054] Console: switching to colour frame buffer device 240x67
[ 13.954601] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[ 13.954669] radeon 0000:00:10.0: registered panic notifier
[ 13.954737] [drm] Initialized radeon 2.41.0 20080528 for
0000:00:10.0 on minor 0
[ 15.438721] Adding 1650120k swap on /dev/sda4. Priority:-1
extents:1 across:1650120k FS
[ 15.778460] sungem_phy: PHY ID: 4061e4, addr: 0
[ 15.778814] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
[ 15.779140] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.178268] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 18.178471] gem 0002:20:0f.0 eth0: Pause is disabled
[ 18.181207] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.372879] Process accounting resumed
[ 24.367106] input: Mouseemu virtual keyboard as /devices/virtual/input/input1
[ 24.381877] input: Mouseemu virtual mouse as /devices/virtual/input/input2
[ 37.046306] f 0#3: signaled from radeon_fence_signaled
[ 38.339580] f 0#8: armed on ring 0!
[ 38.372725] f 0#8: signaled from irq context
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 20:07 ` Pranith Kumar
@ 2015-03-17 20:13 ` Peter Hurley
-1 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:13 UTC (permalink / raw)
To: Pranith Kumar; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 04:07 PM, Pranith Kumar wrote:
> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>
>> Can you send me a complete dmesg capture from a boot with
>> this commit reverted?
>>
>
> Here it is. Let me know if you want any boot options enabled. I
> removed both debug and verbose boot options.
Ok, thanks.
This is just like Andreas' problem: with my patch, there is _no_ console.
Note those console command line options in your config aren't actually
in your kernel command line. That really threw me; I couldn't figure out
how you didn't have a tty0 console.
> [ 0.000000] Kernel command line:
> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
> video=offb:off radeon.modeset=1 radeon.agpmode=-1
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 20:13 ` Peter Hurley
0 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:13 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 04:07 PM, Pranith Kumar wrote:
> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>
>> Can you send me a complete dmesg capture from a boot with
>> this commit reverted?
>>
>
> Here it is. Let me know if you want any boot options enabled. I
> removed both debug and verbose boot options.
Ok, thanks.
This is just like Andreas' problem: with my patch, there is _no_ console.
Note those console command line options in your config aren't actually
in your kernel command line. That really threw me; I couldn't figure out
how you didn't have a tty0 console.
> [ 0.000000] Kernel command line:
> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
> video=offb:off radeon.modeset=1 radeon.agpmode=-1
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 20:13 ` Peter Hurley
@ 2015-03-17 20:16 ` Pranith Kumar
-1 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 20:16 UTC (permalink / raw)
To: Peter Hurley; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On Tue, Mar 17, 2015 at 4:13 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> On 03/17/2015 04:07 PM, Pranith Kumar wrote:
>> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>
>>> Can you send me a complete dmesg capture from a boot with
>>> this commit reverted?
>>>
>>
>> Here it is. Let me know if you want any boot options enabled. I
>> removed both debug and verbose boot options.
>
> Ok, thanks.
>
> This is just like Andreas' problem: with my patch, there is _no_ console.
>
> Note those console command line options in your config aren't actually
> in your kernel command line. That really threw me; I couldn't figure out
> how you didn't have a tty0 console.
>
>> [ 0.000000] Kernel command line:
>> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
>> video=offb:off radeon.modeset=1 radeon.agpmode=-1
>
Hmm, interesting. These arguments are passed from the yaboot.conf
which has a line as follows:
append="video=radeonfb:off video=offb:off radeon.modeset=1 radeon.agpmode=-1"
I thought this would append these arguments to the default kernel
command line argument in the config. Apparently it is not. So, the
resolution for this is to add the console argument to yaboot.conf I
guess, right?
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 20:16 ` Pranith Kumar
0 siblings, 0 replies; 24+ messages in thread
From: Pranith Kumar @ 2015-03-17 20:16 UTC (permalink / raw)
To: Peter Hurley; +Cc: open list:LINUX FOR POWERPC..., LKML
On Tue, Mar 17, 2015 at 4:13 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> On 03/17/2015 04:07 PM, Pranith Kumar wrote:
>> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>
>>> Can you send me a complete dmesg capture from a boot with
>>> this commit reverted?
>>>
>>
>> Here it is. Let me know if you want any boot options enabled. I
>> removed both debug and verbose boot options.
>
> Ok, thanks.
>
> This is just like Andreas' problem: with my patch, there is _no_ console.
>
> Note those console command line options in your config aren't actually
> in your kernel command line. That really threw me; I couldn't figure out
> how you didn't have a tty0 console.
>
>> [ 0.000000] Kernel command line:
>> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
>> video=offb:off radeon.modeset=1 radeon.agpmode=-1
>
Hmm, interesting. These arguments are passed from the yaboot.conf
which has a line as follows:
append="video=radeonfb:off video=offb:off radeon.modeset=1 radeon.agpmode=-1"
I thought this would append these arguments to the default kernel
command line argument in the config. Apparently it is not. So, the
resolution for this is to add the console argument to yaboot.conf I
guess, right?
--
Pranith
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
2015-03-17 20:16 ` Pranith Kumar
@ 2015-03-17 20:23 ` Peter Hurley
-1 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:23 UTC (permalink / raw)
To: Pranith Kumar; +Cc: Michael Ellerman, open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 04:16 PM, Pranith Kumar wrote:
> On Tue, Mar 17, 2015 at 4:13 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>> On 03/17/2015 04:07 PM, Pranith Kumar wrote:
>>> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>
>>>> Can you send me a complete dmesg capture from a boot with
>>>> this commit reverted?
>>>>
>>>
>>> Here it is. Let me know if you want any boot options enabled. I
>>> removed both debug and verbose boot options.
>>
>> Ok, thanks.
>>
>> This is just like Andreas' problem: with my patch, there is _no_ console.
>>
>> Note those console command line options in your config aren't actually
>> in your kernel command line. That really threw me; I couldn't figure out
>> how you didn't have a tty0 console.
>>
>>> [ 0.000000] Kernel command line:
>>> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
>>> video=offb:off radeon.modeset=1 radeon.agpmode=-1
>>
>
> Hmm, interesting. These arguments are passed from the yaboot.conf
> which has a line as follows:
>
> append="video=radeonfb:off video=offb:off radeon.modeset=1 radeon.agpmode=-1"
>
> I thought this would append these arguments to the default kernel
> command line argument in the config. Apparently it is not. So, the
> resolution for this is to add the console argument to yaboot.conf I
> guess, right?
No, I'm sending a revert anyway, but I thought I'd let you know.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: linux panic on 4.0.0-rc4
@ 2015-03-17 20:23 ` Peter Hurley
0 siblings, 0 replies; 24+ messages in thread
From: Peter Hurley @ 2015-03-17 20:23 UTC (permalink / raw)
To: Pranith Kumar; +Cc: open list:LINUX FOR POWERPC..., LKML
On 03/17/2015 04:16 PM, Pranith Kumar wrote:
> On Tue, Mar 17, 2015 at 4:13 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>> On 03/17/2015 04:07 PM, Pranith Kumar wrote:
>>> On Tue, Mar 17, 2015 at 4:03 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>
>>>> Can you send me a complete dmesg capture from a boot with
>>>> this commit reverted?
>>>>
>>>
>>> Here it is. Let me know if you want any boot options enabled. I
>>> removed both debug and verbose boot options.
>>
>> Ok, thanks.
>>
>> This is just like Andreas' problem: with my patch, there is _no_ console.
>>
>> Note those console command line options in your config aren't actually
>> in your kernel command line. That really threw me; I couldn't figure out
>> how you didn't have a tty0 console.
>>
>>> [ 0.000000] Kernel command line:
>>> root=UUID=7252209a-6106-41c2-90a3-45b85ac47837 ro video=radeonfb:off
>>> video=offb:off radeon.modeset=1 radeon.agpmode=-1
>>
>
> Hmm, interesting. These arguments are passed from the yaboot.conf
> which has a line as follows:
>
> append="video=radeonfb:off video=offb:off radeon.modeset=1 radeon.agpmode=-1"
>
> I thought this would append these arguments to the default kernel
> command line argument in the config. Apparently it is not. So, the
> resolution for this is to add the console argument to yaboot.conf I
> guess, right?
No, I'm sending a revert anyway, but I thought I'd let you know.
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2015-03-17 20:23 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-16 5:11 linux panic on 4.0.0-rc4 Pranith Kumar
2015-03-16 5:34 ` Pranith Kumar
2015-03-16 8:16 ` Michael Ellerman
2015-03-16 13:30 ` Pranith Kumar
2015-03-16 14:01 ` Peter Hurley
2015-03-16 23:22 ` Michael Ellerman
2015-03-17 2:02 ` Pranith Kumar
2015-03-17 2:58 ` Peter Hurley
2015-03-17 3:12 ` Pranith Kumar
2015-03-17 3:12 ` Pranith Kumar
2015-03-17 3:18 ` Peter Hurley
2015-03-17 3:18 ` Peter Hurley
2015-03-17 6:33 ` Pranith Kumar
2015-03-17 6:33 ` Pranith Kumar
2015-03-17 20:03 ` Peter Hurley
2015-03-17 20:03 ` Peter Hurley
2015-03-17 20:07 ` Pranith Kumar
2015-03-17 20:07 ` Pranith Kumar
2015-03-17 20:13 ` Peter Hurley
2015-03-17 20:13 ` Peter Hurley
2015-03-17 20:16 ` Pranith Kumar
2015-03-17 20:16 ` Pranith Kumar
2015-03-17 20:23 ` Peter Hurley
2015-03-17 20:23 ` Peter Hurley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.