[PATCH v6 1/6] Bluetooth: Introduce HCI_QUIRK_SIMULTANEOUS_DISCOVERY

[PATCH v6 1/6] Bluetooth: Introduce HCI_QUIRK_SIMULTANEOUS_DISCOVERY

[Jakub Pawlowski]

Some controllers allow both LE scan and BR/EDR inquiry to run at
the same time, while others allow only one, LE SCAN or BR/EDR
inquiry at given time.

Since this is specific to each controller, add a new quirk setting
that allows drivers to tell the core wether given controller can
do both LE scan and BR/EDR inquiry at same time.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 include/net/bluetooth/hci.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index a6ea156..06e7eee 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -160,6 +160,14 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_STRICT_DUPLICATE_FILTER,
+
+	/* When this quirk is set, LE scan and BR/EDR inquiry is done
+	 * simultaneously, otherwise it's interleaved.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_SIMULTANEOUS_DISCOVERY,
 };
 
 /* HCI device flags */
-- 
2.2.0.rc0.207.ga3a616c

[PATCH v6 2/6] Bluetooth: Refactor BR/EDR inquiry and LE scan triggering.

[Jakub Pawlowski]

This patch refactor BR/EDR inquiry and LE scan triggering logic into
separate methods.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 net/bluetooth/mgmt.c | 150 +++++++++++++++++++++++++++++----------------------
 1 file changed, 85 insertions(+), 65 deletions(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 72e41d2..5a4b9d5 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3921,93 +3921,113 @@ done:
 	return err;
 }
 
-static bool trigger_discovery(struct hci_request *req, u8 *status)
+static bool trigger_bredr_inquiry(struct hci_request *req, u8 *status)
 {
 	struct hci_dev *hdev = req->hdev;
-	struct hci_cp_le_set_scan_param param_cp;
-	struct hci_cp_le_set_scan_enable enable_cp;
-	struct hci_cp_inquiry inq_cp;
+	struct hci_cp_inquiry cp;
 	/* General inquiry access code (GIAC) */
 	u8 lap[3] = { 0x33, 0x8b, 0x9e };
+
+	*status = mgmt_bredr_support(hdev);
+	if (*status)
+		return false;
+
+	if (hci_dev_test_flag(hdev, HCI_INQUIRY)) {
+		*status = MGMT_STATUS_BUSY;
+		return false;
+	}
+
+	hci_inquiry_cache_flush(hdev);
+
+	memset(&cp, 0, sizeof(cp));
+	memcpy(&cp.lap, lap, sizeof(cp.lap));
+	cp.length = DISCOV_BREDR_INQUIRY_LEN;
+
+	hci_req_add(req, HCI_OP_INQUIRY, sizeof(cp), &cp);
+
+	return true;
+}
+
+static bool trigger_le_scan(struct hci_request *req, u16 interval, u8 *status)
+{
+	struct hci_dev *hdev = req->hdev;
+	struct hci_cp_le_set_scan_param param_cp;
+	struct hci_cp_le_set_scan_enable enable_cp;
 	u8 own_addr_type;
 	int err;
 
-	switch (hdev->discovery.type) {
-	case DISCOV_TYPE_BREDR:
-		*status = mgmt_bredr_support(hdev);
-		if (*status)
-			return false;
+	*status = mgmt_le_support(hdev);
+	if (*status)
+		return false;
 
-		if (test_bit(HCI_INQUIRY, &hdev->flags)) {
-			*status = MGMT_STATUS_BUSY;
+	if (hci_dev_test_flag(hdev, HCI_LE_ADV)) {
+		/* Don't let discovery abort an outgoing connection attempt
+		 * that's using directed advertising.
+		 */
+		if (hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
+			*status = MGMT_STATUS_REJECTED;
 			return false;
 		}
 
-		hci_inquiry_cache_flush(hdev);
+		disable_advertising(req);
+	}
 
-		memset(&inq_cp, 0, sizeof(inq_cp));
-		memcpy(&inq_cp.lap, lap, sizeof(inq_cp.lap));
-		inq_cp.length = DISCOV_BREDR_INQUIRY_LEN;
-		hci_req_add(req, HCI_OP_INQUIRY, sizeof(inq_cp), &inq_cp);
-		break;
+	/* If controller is scanning, it means the background scanning is
+	 * running. Thus, we should temporarily stop it in order to set the
+	 * discovery scanning parameters.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
+		hci_req_add_le_scan_disable(req);
 
-	case DISCOV_TYPE_LE:
-	case DISCOV_TYPE_INTERLEAVED:
-		*status = mgmt_le_support(hdev);
-		if (*status)
-			return false;
+	/* All active scans will be done with either a resolvable private
+	 * address (when privacy feature has been enabled) or non-resolvable
+	 * private address.
+	 */
+	err = hci_update_random_address(req, true, &own_addr_type);
+	if (err < 0) {
+		*status = MGMT_STATUS_FAILED;
+		return false;
+	}
 
-		if (hdev->discovery.type == DISCOV_TYPE_INTERLEAVED &&
-		    !hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
-			*status = MGMT_STATUS_NOT_SUPPORTED;
-			return false;
-		}
+	memset(&param_cp, 0, sizeof(param_cp));
+	param_cp.type = LE_SCAN_ACTIVE;
+	param_cp.interval = cpu_to_le16(interval);
+	param_cp.window = cpu_to_le16(DISCOV_LE_SCAN_WIN);
+	param_cp.own_address_type = own_addr_type;
 
-		if (hci_dev_test_flag(hdev, HCI_LE_ADV)) {
-			/* Don't let discovery abort an outgoing
-			 * connection attempt that's using directed
-			 * advertising.
-			 */
-			if (hci_conn_hash_lookup_state(hdev, LE_LINK,
-						       BT_CONNECT)) {
-				*status = MGMT_STATUS_REJECTED;
-				return false;
-			}
+	hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
+		    &param_cp);
 
-			disable_advertising(req);
-		}
+	memset(&enable_cp, 0, sizeof(enable_cp));
+	enable_cp.enable = LE_SCAN_ENABLE;
+	enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
 
-		/* If controller is scanning, it means the background scanning
-		 * is running. Thus, we should temporarily stop it in order to
-		 * set the discovery scanning parameters.
-		 */
-		if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
-			hci_req_add_le_scan_disable(req);
+	hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
+		    &enable_cp);
+
+	return true;
+}
 
-		memset(&param_cp, 0, sizeof(param_cp));
+static bool trigger_discovery(struct hci_request *req, u8 *status)
+{
+	struct hci_dev *hdev = req->hdev;
 
-		/* All active scans will be done with either a resolvable
-		 * private address (when privacy feature has been enabled)
-		 * or non-resolvable private address.
-		 */
-		err = hci_update_random_address(req, true, &own_addr_type);
-		if (err < 0) {
-			*status = MGMT_STATUS_FAILED;
+	switch (hdev->discovery.type) {
+	case DISCOV_TYPE_BREDR:
+		if (!trigger_bredr_inquiry(req, status))
+			return false;
+		break;
+
+	case DISCOV_TYPE_INTERLEAVED:
+		if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
+			*status = MGMT_STATUS_NOT_SUPPORTED;
 			return false;
 		}
+		/* fall through */
 
-		param_cp.type = LE_SCAN_ACTIVE;
-		param_cp.interval = cpu_to_le16(DISCOV_LE_SCAN_INT);
-		param_cp.window = cpu_to_le16(DISCOV_LE_SCAN_WIN);
-		param_cp.own_address_type = own_addr_type;
-		hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
-			    &param_cp);
-
-		memset(&enable_cp, 0, sizeof(enable_cp));
-		enable_cp.enable = LE_SCAN_ENABLE;
-		enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
-		hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
-			    &enable_cp);
+	case DISCOV_TYPE_LE:
+		if (!trigger_le_scan(req, DISCOV_LE_SCAN_INT, status))
+			return false;
 		break;
 
 	default:
-- 
2.2.0.rc0.207.ga3a616c

[PATCH v6 3/6] Bluetooth: Add simultaneous dual mode scan

[Jakub Pawlowski]

When doing scan through mgmt api, some controllers can do both le and
classic scan at same time. They can be distinguished by
HCI_QUIRK_SIMULTANEOUS_DISCOVERY set.

This patch enables them to use this feature when doing dual mode scan.
Instead of doing le, then classic scan, both scans are run at once.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 net/bluetooth/hci_core.c  | 24 +++++++++++++++++++-----
 net/bluetooth/hci_event.c | 22 ++++++++++++++++++++--
 net/bluetooth/mgmt.c      | 34 +++++++++++++++++++++++++++++++---
 3 files changed, 70 insertions(+), 10 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 750d344..773f216 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2902,12 +2902,26 @@ static void le_scan_disable_work_complete(struct hci_dev *hdev, u8 status,
 
 		hci_dev_lock(hdev);
 
-		hci_inquiry_cache_flush(hdev);
+		if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY,
+			     &hdev->quirks)) {
+			/* If we were running LE only scan, change discovery
+			 * state. If we were running both LE and BR/EDR inquiry
+			 * simultaneously, and BR/EDR inquiry is already
+			 * finished, stop discovery, otherwise BR/EDR inquiry
+			 * will stop discovery when finished.
+			 */
+			if (!test_bit(HCI_INQUIRY, &hdev->flags))
+				hci_discovery_set_state(hdev,
+							DISCOVERY_STOPPED);
+		} else {
+			hci_inquiry_cache_flush(hdev);
 
-		err = hci_req_run(&req, inquiry_complete);
-		if (err) {
-			BT_ERR("Inquiry request failed: err %d", err);
-			hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+			err = hci_req_run(&req, inquiry_complete);
+			if (err) {
+				BT_ERR("Inquiry request failed: err %d", err);
+				hci_discovery_set_state(hdev,
+							DISCOVERY_STOPPED);
+			}
 		}
 
 		hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index d800f0c..62f92a5 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2126,7 +2126,16 @@ static void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		goto unlock;
 
 	if (list_empty(&discov->resolve)) {
-		hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+		/* When BR/EDR inquiry is active and no LE scanning is in
+		 * progress, then change discovery state to indicate completion.
+		 *
+		 * When running LE scanning and BR/EDR inquiry simultaneously
+		 * and the LE scan already finished, then change the discovery
+		 * state to indicate completion.
+		 */
+		if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
+		    !test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks))
+			hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
 		goto unlock;
 	}
 
@@ -2135,7 +2144,16 @@ static void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		e->name_state = NAME_PENDING;
 		hci_discovery_set_state(hdev, DISCOVERY_RESOLVING);
 	} else {
-		hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+		/* When BR/EDR inquiry is active and no LE scanning is in
+		 * progress, then change discovery state to indicate completion.
+		 *
+		 * When running LE scanning and BR/EDR inquiry simultaneously
+		 * and the LE scan already finished, then change the discovery
+		 * state to indicate completion.
+		 */
+		if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
+		    !test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks))
+			hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
 	}
 
 unlock:
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 5a4b9d5..7bcdf61 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1408,9 +1408,10 @@ static bool hci_stop_discovery(struct hci_request *req)
 
 	switch (hdev->discovery.state) {
 	case DISCOVERY_FINDING:
-		if (test_bit(HCI_INQUIRY, &hdev->flags)) {
+		if (test_bit(HCI_INQUIRY, &hdev->flags))
 			hci_req_add(req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
-		} else {
+
+		if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
 			cancel_delayed_work(&hdev->le_scan_disable);
 			hci_req_add_le_scan_disable(req);
 		}
@@ -4019,6 +4020,22 @@ static bool trigger_discovery(struct hci_request *req, u8 *status)
 		break;
 
 	case DISCOV_TYPE_INTERLEAVED:
+		if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY,
+			     &hdev->quirks)) {
+			/* During simultaneous discovery, we double LE scan
+			 * interval. We must leave some time for the controller
+			 * to do BR/EDR inquiry.
+			 */
+			if (!trigger_le_scan(req, DISCOV_LE_SCAN_INT * 2,
+					     status))
+				return false;
+
+			if (!trigger_bredr_inquiry(req, status))
+				return false;
+
+			return true;
+		}
+
 		if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
 			*status = MGMT_STATUS_NOT_SUPPORTED;
 			return false;
@@ -4072,7 +4089,18 @@ static void start_discovery_complete(struct hci_dev *hdev, u8 status,
 		timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
 		break;
 	case DISCOV_TYPE_INTERLEAVED:
-		timeout = msecs_to_jiffies(hdev->discov_interleaved_timeout);
+		 /* When running simultaneous discovery, the LE scanning time
+		 * should occupy the whole discovery time sine BR/EDR inquiry
+		 * and LE scanning are scheduled by the controller.
+		 *
+		 * For interleaving discovery in comparison, BR/EDR inquiry
+		 * and LE scanning are done sequentially with separate
+		 * timeouts.
+		 */
+		if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks))
+			timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
+		else
+			timeout = msecs_to_jiffies(hdev->discov_interleaved_timeout);
 		break;
 	case DISCOV_TYPE_BREDR:
 		timeout = 0;
-- 
2.2.0.rc0.207.ga3a616c

[PATCH v6 4/6] Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_ATH3012

[Jakub Pawlowski]

Atheros controllers can do both LE scan and BR/EDR inquiry at once.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f6ef75f..321bfeb 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3042,6 +3042,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_ATH3012) {
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
-- 
2.2.0.rc0.207.ga3a616c

[PATCH v6 5/6] Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_INTEL

[Jakub Pawlowski]

Intel controllers can do both LE scan and BR/EDR inquiry at once.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 321bfeb..21df7b2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3019,6 +3019,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->shutdown = btusb_shutdown_intel;
 		hdev->set_bdaddr = btusb_set_bdaddr_intel;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_INTEL_NEW) {
-- 
2.2.0.rc0.207.ga3a616c

[PATCH v6 6/6] Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_CSR

[Jakub Pawlowski]

CSR controllers can do both LE scan and BR/EDR inquiry at once.

Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 21df7b2..708b657 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3087,6 +3087,8 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Fake CSR devices with broken commands */
 		if (bcdDevice <= 0x100)
 			hdev->setup = btusb_setup_csr;
+
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
-- 
2.2.0.rc0.207.ga3a616c

Re: [PATCH v6 1/6] Bluetooth: Introduce HCI_QUIRK_SIMULTANEOUS_DISCOVERY

[Johan Hedberg]

Hi Jakub,

On Tue, Mar 17, 2015, Jakub Pawlowski wrote:
> Some controllers allow both LE scan and BR/EDR inquiry to run at
> the same time, while others allow only one, LE SCAN or BR/EDR
> inquiry at given time.
> 
> Since this is specific to each controller, add a new quirk setting
> that allows drivers to tell the core wether given controller can
> do both LE scan and BR/EDR inquiry at same time.
> 
> Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
> ---
>  include/net/bluetooth/hci.h | 8 ++++++++
>  1 file changed, 8 insertions(+)

All 6 patches have been applied to bluetooth-next. Thanks.

Johan