* [PATCH RFC 01/11] devres: add devm_alloc_percpu()
@ 2015-03-17 18:58 Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Introduce managed counterparts for alloc_percpu() and free_percpu().
Add devm_alloc_percpu() and devm_free_percpu() into the managed
interfaces list.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Tested-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
---
Documentation/driver-model/devres.txt | 4 +++
drivers/base/devres.c | 63 +++++++++++++++++++++++++++++++++++
include/linux/device.h | 19 +++++++++++
3 files changed, 86 insertions(+)
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 6d1e8ee..f105669 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -307,6 +307,10 @@ MEM
devm_kvasprintf()
devm_kzalloc()
+PER-CPU MEM
+ devm_alloc_percpu()
+ devm_free_percpu()
+
PCI
pcim_enable_device() : after success, all PCI ops become managed
pcim_pin_device() : keep PCI device enabled after release
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index c8a53d1..6c76e75 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -984,3 +984,66 @@ void devm_free_pages(struct device *dev, unsigned long addr)
&devres));
}
EXPORT_SYMBOL_GPL(devm_free_pages);
+
+static void devm_percpu_release(struct device *dev, void *pdata)
+{
+ void __percpu *p;
+
+ p = *(void __percpu **)pdata;
+ free_percpu(p);
+}
+
+static int devm_percpu_match(struct device *dev, void *data, void *p)
+{
+ struct devres *devr = container_of(data, struct devres, data);
+
+ return *(void **)devr->data == p;
+}
+
+/**
+ * __devm_alloc_percpu - Resource-managed alloc_percpu
+ * @dev: Device to allocate per-cpu memory for
+ * @size: Size of per-cpu memory to allocate
+ * @align: Alignement of per-cpu memory to allocate
+ *
+ * Managed alloc_percpu. Per-cpu memory allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * RETURNS:
+ * Pointer to allocated memory on success, NULL on failure.
+ */
+void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
+ size_t align)
+{
+ void *p;
+ void __percpu *pcpu;
+
+ pcpu = __alloc_percpu(size, align);
+ if (!pcpu)
+ return NULL;
+
+ p = devres_alloc(devm_percpu_release, sizeof(void *), GFP_KERNEL);
+ if (!p)
+ return NULL;
+
+ *(void __percpu **)p = pcpu;
+
+ devres_add(dev, p);
+
+ return pcpu;
+}
+EXPORT_SYMBOL_GPL(__devm_alloc_percpu);
+
+/**
+ * devm_free_percpu - Resource-managed free_percpu
+ * @dev: Device this memory belongs to
+ * @pdata: Per-cpu memory to free
+ *
+ * Free memory allocated with devm_alloc_percpu().
+ */
+void devm_free_percpu(struct device *dev, void __percpu *pdata)
+{
+ WARN_ON(devres_destroy(dev, devm_percpu_release, devm_percpu_match,
+ (void *)pdata));
+}
+EXPORT_SYMBOL_GPL(devm_free_percpu);
diff --git a/include/linux/device.h b/include/linux/device.h
index 0eb8ee2..5b570f4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -641,6 +641,25 @@ void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
int devm_add_action(struct device *dev, void (*action)(void *), void *data);
void devm_remove_action(struct device *dev, void (*action)(void *), void *data);
+/**
+ * devm_alloc_percpu - Resource-managed alloc_percpu
+ * @dev: Device to allocate per-cpu memory for
+ * @type: Type to allocate per-cpu memory for
+ *
+ * Managed alloc_percpu. Per-cpu memory allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * RETURNS:
+ * Pointer to allocated memory on success, NULL on failure.
+ */
+#define devm_alloc_percpu(dev, type) \
+ (typeof(type) __percpu *)__devm_alloc_percpu(dev, sizeof(type), \
+ __alignof__(type))
+
+void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
+ size_t align);
+void devm_free_percpu(struct device *dev, void __percpu *pdata);
+
struct device_dma_parameters {
/*
* a low level driver may set these to teach IOMMU code about
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet
2015-03-17 18:58 [PATCH RFC 01/11] devres: add devm_alloc_percpu() Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 03/11] dpaa_eth: add PM ops Madalin Bucur
2015-03-18 16:30 ` Kumar Gala
0 siblings, 2 replies; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
the Freescale DPAA QorIQ platforms.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/Kconfig | 2 +
drivers/net/ethernet/freescale/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/Kconfig | 49 +
drivers/net/ethernet/freescale/dpaa/Makefile | 14 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 837 +++++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 446 +++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1288 ++++++++++++++++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 119 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 428 +++++++
9 files changed, 3184 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig
create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index ba84c4a..dd485f1 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -95,4 +95,6 @@ config GIANFAR
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, and the FEC on the 8540.
+source "drivers/net/ethernet/freescale/dpaa/Kconfig"
+
endif # NET_VENDOR_FREESCALE
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 71debd1..b6c10ab 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/
obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(if $(CONFIG_FSL_DPAA_ETH),y) += dpaa/
obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
gianfar_driver-objs := gianfar.o \
gianfar_ethtool.o
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
new file mode 100644
index 0000000..7ef703c
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -0,0 +1,49 @@
+menuconfig FSL_DPAA_ETH
+ tristate "DPAA Ethernet"
+ depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
+ select PHYLIB
+ select FSL_FMAN_MAC
+ ---help---
+ Data Path Acceleration Architecture Ethernet driver,
+ supporting the Freescale QorIQ chips.
+ Depends on Freescale Buffer Manager and Queue Manager
+ driver and Frame Manager Driver.
+
+if FSL_DPAA_ETH
+
+config FSL_DPAA_CS_THRESHOLD_1G
+ hex "Egress congestion threshold on 1G ports"
+ depends on FSL_DPAA_ETH
+ range 0x1000 0x10000000
+ default "0x06000000"
+ ---help---
+ The size in bytes of the egress Congestion State notification threshold on 1G ports.
+ The 1G dTSECs can quite easily be flooded by cores doing Tx in a tight loop
+ (e.g. by sending UDP datagrams at "while(1) speed"),
+ and the larger the frame size, the more acute the problem.
+ So we have to find a balance between these factors:
+ - avoiding the device staying congested for a prolonged time (risking
+ the netdev watchdog to fire - see also the tx_timeout module param);
+ - affecting performance of protocols such as TCP, which otherwise
+ behave well under the congestion notification mechanism;
+ - preventing the Tx cores from tightly-looping (as if the congestion
+ threshold was too low to be effective);
+ - running out of memory if the CS threshold is set too high.
+
+config FSL_DPAA_CS_THRESHOLD_10G
+ hex "Egress congestion threshold on 10G ports"
+ depends on FSL_DPAA_ETH
+ range 0x1000 0x20000000
+ default "0x10000000"
+ ---help ---
+ The size in bytes of the egress Congestion State notification threshold on 10G ports.
+
+config FSL_DPAA_INGRESS_CS_THRESHOLD
+ hex "Ingress congestion threshold on FMan ports"
+ depends on FSL_DPAA_ETH
+ default "0x10000000"
+ ---help---
+ The size in bytes of the ingress tail-drop threshold on FMan ports.
+ Traffic piling up above this value will be rejected by QMan and discarded by FMan.
+
+endif # FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
new file mode 100644
index 0000000..bdeb04e
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the Freescale DPAA Ethernet controllers
+#
+ccflags-y += -DVERSION=\"\"
+#
+# Include FMan headers
+FMAN = $(srctree)/drivers/soc/fsl/fman
+ccflags-y += -I$(FMAN)
+ccflags-y += -I$(FMAN)/inc
+ccflags-y += -I$(FMAN)/flib
+
+obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
+
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
new file mode 100644
index 0000000..96a7cee
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -0,0 +1,837 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) \
+ KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/if_arp.h> /* arp_hdr_len() */
+#include <linux/if_vlan.h> /* VLAN_HLEN */
+#include <linux/icmp.h> /* struct icmphdr */
+#include <linux/ip.h> /* struct iphdr */
+#include <linux/ipv6.h> /* struct ipv6hdr */
+#include <linux/udp.h> /* struct udphdr */
+#include <linux/tcp.h> /* struct tcphdr */
+#include <linux/net.h> /* net_ratelimit() */
+#include <linux/if_ether.h> /* ETH_P_IP and ETH_P_IPV6 */
+#include <linux/highmem.h>
+#include <linux/percpu.h>
+#include <linux/dma-mapping.h>
+#include <soc/fsl/bman.h>
+
+#include "fsl_fman.h"
+#include "fm_ext.h"
+#include "fm_port_ext.h"
+
+#include "mac.h"
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+
+#define DPA_NAPI_WEIGHT 64
+
+/* Valid checksum indication */
+#define DPA_CSUM_VALID 0xFFFF
+
+#define DPA_DESCRIPTION "FSL DPAA Ethernet driver"
+
+MODULE_LICENSE("Dual BSD/GPL");
+
+MODULE_AUTHOR("Andy Fleming <afleming@freescale.com>");
+
+MODULE_DESCRIPTION(DPA_DESCRIPTION);
+
+static u8 debug = -1;
+module_param(debug, byte, S_IRUGO);
+MODULE_PARM_DESC(debug, "Module/Driver verbosity level");
+
+/* This has to work in tandem with the DPA_CS_THRESHOLD_xxx values. */
+static u16 tx_timeout = 1000;
+module_param(tx_timeout, ushort, S_IRUGO);
+MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
+
+/* BM */
+
+#define DPAA_ETH_MAX_PAD (L1_CACHE_BYTES * 8)
+
+static u8 dpa_priv_common_bpid;
+
+static void _dpa_rx_error(struct net_device *net_dev,
+ const struct dpa_priv_s *priv,
+ struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ /* limit common, possibly innocuous Rx FIFO Overflow errors'
+ * interference with zero-loss convergence benchmark results.
+ */
+ if (likely(fd->status & FM_FD_STAT_ERR_PHYSICAL))
+ pr_warn_once("non-zero error counters in fman statistics (sysfs)\n");
+ else
+ if (netif_msg_hw(priv) && net_ratelimit())
+ netdev_err(net_dev, "Err FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_RX_ERRORS);
+
+ percpu_priv->stats.rx_errors++;
+
+ dpa_fd_release(net_dev, fd);
+}
+
+static void _dpa_tx_error(struct net_device *net_dev,
+ const struct dpa_priv_s *priv,
+ struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ struct sk_buff *skb;
+
+ if (netif_msg_hw(priv) && net_ratelimit())
+ netdev_warn(net_dev, "FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_TX_ERRORS);
+
+ percpu_priv->stats.tx_errors++;
+
+ /* If we intended the buffers from this frame to go into the bpools
+ * when the FMan transmit was done, we need to put it in manually.
+ */
+ if (fd->cmd & FM_FD_CMD_FCO) {
+ dpa_fd_release(net_dev, fd);
+ return;
+ }
+
+ skb = _dpa_cleanup_tx_fd(priv, fd);
+ dev_kfree_skb(skb);
+}
+
+static int dpaa_eth_poll(struct napi_struct *napi, int budget)
+{
+ struct dpa_napi_portal *np =
+ container_of(napi, struct dpa_napi_portal, napi);
+
+ int cleaned = qman_p_poll_dqrr(np->p, budget);
+
+ if (cleaned < budget) {
+ int tmp;
+
+ napi_complete(napi);
+ tmp = qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
+ DPA_ERR_ON(tmp);
+ }
+
+ return cleaned;
+}
+
+static void __hot _dpa_tx_conf(struct net_device *net_dev,
+ const struct dpa_priv_s *priv,
+ struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ struct sk_buff *skb;
+
+ if (unlikely(fd->status & FM_FD_STAT_TX_ERRORS) != 0) {
+ if (netif_msg_hw(priv) && net_ratelimit())
+ netdev_warn(net_dev, "FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_TX_ERRORS);
+
+ percpu_priv->stats.tx_errors++;
+ }
+
+ skb = _dpa_cleanup_tx_fd(priv, fd);
+
+ dev_kfree_skb(skb);
+}
+
+static enum qman_cb_dqrr_result
+priv_rx_error_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv;
+ int *count_ptr;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+ count_ptr = raw_cpu_ptr(priv->dpa_bp->percpu_count);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ if (unlikely(dpaa_eth_refill_bpools(priv->dpa_bp, count_ptr)))
+ /* Unable to refill the buffer pool due to insufficient
+ * system memory. Just release the frame back into the pool,
+ * otherwise we'll soon end up with an empty buffer pool.
+ */
+ dpa_fd_release(net_dev, &dq->fd);
+ else
+ _dpa_rx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result __hot
+priv_rx_default_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv;
+ int *count_ptr;
+ struct dpa_bp *dpa_bp;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+ dpa_bp = priv->dpa_bp;
+
+ /* IRQ handler, non-migratable; safe to use raw_cpu_ptr here */
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+ count_ptr = raw_cpu_ptr(dpa_bp->percpu_count);
+
+ if (unlikely(dpaa_eth_napi_schedule(percpu_priv, portal)))
+ return qman_cb_dqrr_stop;
+
+ /* Vale of plenty: make sure we didn't run out of buffers */
+
+ if (unlikely(dpaa_eth_refill_bpools(dpa_bp, count_ptr)))
+ /* Unable to refill the buffer pool due to insufficient
+ * system memory. Just release the frame back into the pool,
+ * otherwise we'll soon end up with an empty buffer pool.
+ */
+ dpa_fd_release(net_dev, &dq->fd);
+ else
+ _dpa_rx(net_dev, portal, priv, percpu_priv, &dq->fd, fq->fqid,
+ count_ptr);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result
+priv_tx_conf_error_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ _dpa_tx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result __hot
+priv_tx_conf_default_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+
+ /* Non-migratable context, safe to use raw_cpu_ptr */
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ _dpa_tx_conf(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static void priv_ern(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_mr_entry *msg)
+{
+ struct net_device *net_dev;
+ const struct dpa_priv_s *priv;
+ struct sk_buff *skb;
+ struct dpa_percpu_priv_s *percpu_priv;
+ struct qm_fd fd = msg->ern.fd;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+ /* Non-migratable context, safe to use raw_cpu_ptr */
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+
+ percpu_priv->stats.tx_dropped++;
+ percpu_priv->stats.tx_fifo_errors++;
+
+ /* If we intended this buffer to go into the pool
+ * when the FM was done, we need to put it in
+ * manually.
+ */
+ if (msg->ern.fd.cmd & FM_FD_CMD_FCO) {
+ dpa_fd_release(net_dev, &fd);
+ return;
+ }
+
+ skb = _dpa_cleanup_tx_fd(priv, &fd);
+ dev_kfree_skb_any(skb);
+}
+
+static const struct dpa_fq_cbs_t private_fq_cbs = {
+ .rx_defq = { .cb = { .dqrr = priv_rx_default_dqrr } },
+ .tx_defq = { .cb = { .dqrr = priv_tx_conf_default_dqrr } },
+ .rx_errq = { .cb = { .dqrr = priv_rx_error_dqrr } },
+ .tx_errq = { .cb = { .dqrr = priv_tx_conf_error_dqrr } },
+ .egress_ern = { .cb = { .ern = priv_ern } }
+};
+
+static void dpaa_eth_napi_enable(struct dpa_priv_s *priv)
+{
+ struct dpa_percpu_priv_s *percpu_priv;
+ int i, j;
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ for (j = 0; j < qman_portal_max; j++)
+ napi_enable(&percpu_priv->np[j].napi);
+ }
+}
+
+static void dpaa_eth_napi_disable(struct dpa_priv_s *priv)
+{
+ struct dpa_percpu_priv_s *percpu_priv;
+ int i, j;
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ for (j = 0; j < qman_portal_max; j++)
+ napi_disable(&percpu_priv->np[j].napi);
+ }
+}
+
+static int __cold dpa_eth_priv_start(struct net_device *net_dev)
+{
+ int err;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ dpaa_eth_napi_enable(priv);
+
+ err = dpa_start(net_dev);
+ if (err < 0)
+ dpaa_eth_napi_disable(priv);
+
+ return err;
+}
+
+static int __cold dpa_eth_priv_stop(struct net_device *net_dev)
+{
+ int _errno;
+ struct dpa_priv_s *priv;
+
+ _errno = dpa_stop(net_dev);
+ /* Allow NAPI to consume any frame still in the Rx/TxConfirm
+ * ingress queues. This is to avoid a race between the current
+ * context and ksoftirqd which could leave NAPI disabled while
+ * in fact there's still Rx traffic to be processed.
+ */
+ usleep_range(5000, 10000);
+
+ priv = netdev_priv(net_dev);
+ dpaa_eth_napi_disable(priv);
+
+ return _errno;
+}
+
+static const struct net_device_ops dpa_private_ops = {
+ .ndo_open = dpa_eth_priv_start,
+ .ndo_start_xmit = dpa_tx,
+ .ndo_stop = dpa_eth_priv_stop,
+ .ndo_tx_timeout = dpa_timeout,
+ .ndo_get_stats64 = dpa_get_stats64,
+ .ndo_set_mac_address = dpa_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = dpa_change_mtu,
+ .ndo_set_rx_mode = dpa_set_rx_mode,
+ .ndo_init = dpa_ndo_init,
+ .ndo_set_features = dpa_set_features,
+ .ndo_fix_features = dpa_fix_features,
+};
+
+static int dpa_private_napi_add(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv_s *percpu_priv;
+ int i, cpu;
+
+ for_each_possible_cpu(cpu) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
+
+ percpu_priv->np = devm_kzalloc(net_dev->dev.parent,
+ qman_portal_max * sizeof(struct dpa_napi_portal),
+ GFP_KERNEL);
+
+ if (unlikely(!percpu_priv->np)) {
+ dev_err(net_dev->dev.parent, "devm_kzalloc() failed\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < qman_portal_max; i++)
+ netif_napi_add(net_dev, &percpu_priv->np[i].napi,
+ dpaa_eth_poll, DPA_NAPI_WEIGHT);
+ }
+
+ return 0;
+}
+
+void dpa_private_napi_del(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv_s *percpu_priv;
+ int i, cpu;
+
+ for_each_possible_cpu(cpu) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
+
+ if (percpu_priv->np) {
+ for (i = 0; i < qman_portal_max; i++)
+ netif_napi_del(&percpu_priv->np[i].napi);
+
+ devm_kfree(net_dev->dev.parent, percpu_priv->np);
+ }
+ }
+}
+EXPORT_SYMBOL(dpa_private_napi_del);
+
+static int dpa_private_netdev_init(struct net_device *net_dev)
+{
+ int i;
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv_s *percpu_priv;
+ const u8 *mac_addr;
+
+ /* Although we access another CPU's private data here
+ * we do it at initialization so it is safe
+ */
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+ percpu_priv->net_dev = net_dev;
+ }
+
+ net_dev->netdev_ops = &dpa_private_ops;
+ mac_addr = priv->mac_dev->addr;
+
+ net_dev->mem_start = priv->mac_dev->res->start;
+ net_dev->mem_end = priv->mac_dev->res->end;
+
+ net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_LLTX);
+
+ net_dev->features |= NETIF_F_GSO;
+
+ return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
+}
+
+static struct dpa_bp * __cold
+dpa_priv_bp_probe(struct device *dev)
+{
+ struct dpa_bp *dpa_bp;
+
+ dpa_bp = devm_kzalloc(dev, sizeof(*dpa_bp), GFP_KERNEL);
+ if (unlikely(!dpa_bp)) {
+ dev_err(dev, "devm_kzalloc() failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ dpa_bp->percpu_count = devm_alloc_percpu(dev, *dpa_bp->percpu_count);
+ dpa_bp->target_count = FSL_DPAA_ETH_MAX_BUF_COUNT;
+
+ dpa_bp->seed_cb = dpa_bp_priv_seed;
+ dpa_bp->free_buf_cb = _dpa_bp_free_pf;
+
+ return dpa_bp;
+}
+
+/* Place all ingress FQs (Rx Default, Rx Error) in a dedicated CGR.
+ * We won't be sending congestion notifications to FMan; for now, we just use
+ * this CGR to generate enqueue rejections to FMan in order to drop the frames
+ * before they reach our ingress queues and eat up memory.
+ */
+static int dpaa_eth_priv_ingress_cgr_init(struct dpa_priv_s *priv)
+{
+ struct qm_mcc_initcgr initcgr;
+ u32 cs_th;
+ int err;
+
+ err = qman_alloc_cgrid(&priv->ingress_cgr.cgrid);
+ if (err < 0) {
+ pr_err("Error %d allocating CGR ID\n", err);
+ goto out_error;
+ }
+
+ /* Enable CS TD, but disable Congestion State Change Notifications. */
+ initcgr.we_mask = QM_CGR_WE_CS_THRES;
+ initcgr.cgr.cscn_en = QM_CGR_EN;
+ cs_th = CONFIG_FSL_DPAA_INGRESS_CS_THRESHOLD;
+ qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
+
+ initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
+ initcgr.cgr.cstd_en = QM_CGR_EN;
+
+ /* This is actually a hack, because this CGR will be associated with
+ * our affine SWP. However, we'll place our ingress FQs in it.
+ */
+ err = qman_create_cgr(&priv->ingress_cgr, QMAN_CGR_FLAG_USE_INIT,
+ &initcgr);
+ if (err < 0) {
+ pr_err("Error %d creating ingress CGR with ID %d\n", err,
+ priv->ingress_cgr.cgrid);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+ goto out_error;
+ }
+ pr_debug("Created ingress CGR %d for netdev with hwaddr %pM\n",
+ priv->ingress_cgr.cgrid, priv->mac_dev->addr);
+
+ /* struct qman_cgr allows special cgrid values (i.e. outside the 0..255
+ * range), but we have no common initialization path between the
+ * different variants of the DPAA Eth driver, so we do it here rather
+ * than modifying every other variant than "private Eth".
+ */
+ priv->use_ingress_cgr = true;
+
+out_error:
+ return err;
+}
+
+static int dpa_priv_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
+ size_t count)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ int i;
+
+ if (netif_msg_probe(priv))
+ dev_dbg(net_dev->dev.parent,
+ "Using private BM buffer pools\n");
+
+ priv->bp_count = count;
+
+ for (i = 0; i < count; i++) {
+ int err;
+
+ err = dpa_bp_alloc(&dpa_bp[i]);
+ if (err < 0) {
+ dpa_bp_free(priv);
+ priv->dpa_bp = NULL;
+ return err;
+ }
+
+ priv->dpa_bp = &dpa_bp[i];
+ }
+
+ dpa_priv_common_bpid = priv->dpa_bp->bpid;
+ return 0;
+}
+
+static const struct of_device_id dpa_match[];
+
+static int
+dpaa_eth_priv_probe(struct platform_device *pdev)
+{
+ int err = 0, i, channel;
+ struct device *dev;
+ struct dpa_bp *dpa_bp;
+ struct dpa_fq *dpa_fq, *tmp;
+ size_t count = 1;
+ struct net_device *net_dev = NULL;
+ struct dpa_priv_s *priv = NULL;
+ struct dpa_percpu_priv_s *percpu_priv;
+ struct fm_port_fqs port_fqs;
+ struct dpa_buffer_layout_s *buf_layout = NULL;
+ struct mac_device *mac_dev;
+ struct task_struct *kth;
+
+ dev = &pdev->dev;
+
+ /* Get the buffer pool assigned to this interface;
+ * run only once the default pool probing code
+ */
+ dpa_bp = (dpa_bpid2pool(dpa_priv_common_bpid)) ? :
+ dpa_priv_bp_probe(dev);
+ if (IS_ERR(dpa_bp))
+ return PTR_ERR(dpa_bp);
+
+ /* Allocate this early, so we can store relevant information in
+ * the private area
+ */
+ net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA_ETH_TX_QUEUES);
+ if (!net_dev) {
+ dev_err(dev, "alloc_etherdev_mq() failed\n");
+ goto alloc_etherdev_mq_failed;
+ }
+
+ snprintf(net_dev->name, IFNAMSIZ, "fm%d-mac%d",
+ dpa_mac_fman_index_get(pdev),
+ dpa_mac_hw_index_get(pdev));
+
+ /* Do this here, so we can be verbose early */
+ SET_NETDEV_DEV(net_dev, dev);
+ dev_set_drvdata(dev, net_dev);
+
+ priv = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+
+ priv->msg_enable = netif_msg_init(debug, -1);
+
+ mac_dev = dpa_mac_dev_get(pdev);
+ if (IS_ERR(mac_dev) || !mac_dev) {
+ err = PTR_ERR(mac_dev);
+ goto mac_probe_failed;
+ }
+
+ /* We have physical ports, so we need to establish
+ * the buffer layout.
+ */
+ buf_layout = devm_kzalloc(dev, 2 * sizeof(*buf_layout),
+ GFP_KERNEL);
+ if (!buf_layout)
+ goto alloc_failed;
+
+ dpa_set_buffers_layout(mac_dev, buf_layout);
+
+ /* For private ports, need to compute the size of the default
+ * buffer pool, based on FMan port buffer layout;also update
+ * the maximum buffer size for private ports if necessary
+ */
+ dpa_bp->size = dpa_bp_size(&buf_layout[RX]);
+
+ INIT_LIST_HEAD(&priv->dpa_fq_list);
+
+ memset(&port_fqs, 0, sizeof(port_fqs));
+
+ err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list, &port_fqs, true, RX);
+ if (!err)
+ err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list,
+ &port_fqs, true, TX);
+
+ if (err < 0)
+ goto fq_probe_failed;
+
+ /* bp init */
+
+ err = dpa_priv_bp_create(net_dev, dpa_bp, count);
+
+ if (err < 0)
+ goto bp_create_failed;
+
+ priv->mac_dev = mac_dev;
+
+ channel = dpa_get_channel();
+
+ if (channel < 0) {
+ err = channel;
+ goto get_channel_failed;
+ }
+
+ priv->channel = (u16)channel;
+
+ /* Start a thread that will walk the cpus with affine portals
+ * and add this pool channel to each's dequeue mask.
+ */
+ kth = kthread_run(dpaa_eth_add_channel,
+ (void *)(unsigned long)priv->channel,
+ "dpaa_%p:%d", net_dev, priv->channel);
+ if (!kth) {
+ err = -ENOMEM;
+ goto add_channel_failed;
+ }
+
+ dpa_fq_setup(priv, &private_fq_cbs, priv->mac_dev->port_dev[TX]);
+
+ /* Create a congestion group for this netdev, with
+ * dynamically-allocated CGR ID.
+ * Must be executed after probing the MAC, but before
+ * assigning the egress FQs to the CGRs.
+ */
+ err = dpaa_eth_cgr_init(priv);
+ if (err < 0) {
+ dev_err(dev, "Error initializing CGR\n");
+ goto tx_cgr_init_failed;
+ }
+ err = dpaa_eth_priv_ingress_cgr_init(priv);
+ if (err < 0) {
+ dev_err(dev, "Error initializing ingress CGR\n");
+ goto rx_cgr_init_failed;
+ }
+
+ /* Add the FQs to the interface, and make them active */
+ list_for_each_entry_safe(dpa_fq, tmp, &priv->dpa_fq_list, list) {
+ err = dpa_fq_init(dpa_fq, false);
+ if (err < 0)
+ goto fq_alloc_failed;
+ }
+
+ priv->buf_layout = buf_layout;
+ priv->tx_headroom = dpa_get_headroom(&priv->buf_layout[TX]);
+ priv->rx_headroom = dpa_get_headroom(&priv->buf_layout[RX]);
+
+ /* All real interfaces need their ports initialized */
+ dpaa_eth_init_ports(mac_dev, dpa_bp, count, &port_fqs,
+ buf_layout, dev);
+
+ priv->percpu_priv = devm_alloc_percpu(dev, *priv->percpu_priv);
+
+ if (!priv->percpu_priv) {
+ dev_err(dev, "devm_alloc_percpu() failed\n");
+ err = -ENOMEM;
+ goto alloc_percpu_failed;
+ }
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+ memset(percpu_priv, 0, sizeof(*percpu_priv));
+ }
+
+ /* Initialize NAPI */
+ err = dpa_private_napi_add(net_dev);
+
+ if (err < 0)
+ goto napi_add_failed;
+
+ err = dpa_private_netdev_init(net_dev);
+
+ if (err < 0)
+ goto netdev_init_failed;
+
+ pr_info("Probed interface %s\n", net_dev->name);
+
+ return 0;
+
+netdev_init_failed:
+napi_add_failed:
+ dpa_private_napi_del(net_dev);
+alloc_percpu_failed:
+ dpa_fq_free(dev, &priv->dpa_fq_list);
+fq_alloc_failed:
+ qman_delete_cgr_safe(&priv->ingress_cgr);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+rx_cgr_init_failed:
+ qman_delete_cgr_safe(&priv->cgr_data.cgr);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+tx_cgr_init_failed:
+add_channel_failed:
+get_channel_failed:
+ dpa_bp_free(priv);
+bp_create_failed:
+fq_probe_failed:
+alloc_failed:
+mac_probe_failed:
+ dev_set_drvdata(dev, NULL);
+ free_netdev(net_dev);
+alloc_etherdev_mq_failed:
+ if (atomic_read(&dpa_bp->refs) == 0)
+ devm_kfree(dev, dpa_bp);
+
+ return err;
+}
+
+static struct platform_device_id dpa_devtype[] = {
+ {
+ .name = "dpaa-ethernet",
+ .driver_data = 0,
+ }, {
+ }
+};
+MODULE_DEVICE_TABLE(platform, dpa_devtype);
+
+static struct platform_driver dpa_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+ .id_table = dpa_devtype,
+ .probe = dpaa_eth_priv_probe,
+ .remove = dpa_remove
+};
+
+static int __init __cold dpa_load(void)
+{
+ int _errno;
+
+ pr_info(DPA_DESCRIPTION " (" VERSION ")\n");
+
+ /* initialise dpaa_eth mirror values */
+ dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
+ dpa_max_frm = fm_get_max_frm();
+
+ _errno = platform_driver_register(&dpa_driver);
+ if (unlikely(_errno < 0)) {
+ pr_err(KBUILD_MODNAME
+ ": %s:%hu:%s(): platform_driver_register() = %d\n",
+ KBUILD_BASENAME ".c", __LINE__, __func__, _errno);
+ }
+
+ pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
+ KBUILD_BASENAME ".c", __func__);
+
+ return _errno;
+}
+module_init(dpa_load);
+
+static void __exit __cold dpa_unload(void)
+{
+ pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
+ KBUILD_BASENAME ".c", __func__);
+
+ platform_driver_unregister(&dpa_driver);
+
+ /* Only one channel is used and needs to be relased after all
+ * interfaces are removed
+ */
+ dpa_release_channel();
+
+ pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
+ KBUILD_BASENAME ".c", __func__);
+}
+module_exit(dpa_unload);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
new file mode 100644
index 0000000..793491f
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -0,0 +1,446 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DPA_H
+#define __DPA_H
+
+#include <linux/netdevice.h>
+#include <soc/fsl/qman.h> /* struct qman_fq */
+
+#include "fm_ext.h"
+
+extern int dpa_rx_extra_headroom;
+extern int dpa_max_frm;
+
+#define dpa_get_rx_extra_headroom() dpa_rx_extra_headroom
+#define dpa_get_max_frm() dpa_max_frm
+
+#define dpa_get_max_mtu() \
+ (dpa_get_max_frm() - (VLAN_ETH_HLEN + ETH_FCS_LEN))
+
+#define __hot
+
+/* Simple enum of FQ types - used for array indexing */
+enum port_type {RX, TX};
+
+struct dpa_buffer_layout_s {
+ u16 priv_data_size;
+ bool parse_results;
+ bool time_stamp;
+ bool hash_results;
+ u16 data_align;
+};
+
+#define DPA_ERR_ON(cond)
+
+#define DPA_TX_PRIV_DATA_SIZE 16
+#define DPA_PARSE_RESULTS_SIZE sizeof(fm_prs_result)
+#define DPA_TIME_STAMP_SIZE 8
+#define DPA_HASH_RESULTS_SIZE 8
+#define DPA_RX_PRIV_DATA_SIZE (DPA_TX_PRIV_DATA_SIZE + \
+ dpa_get_rx_extra_headroom())
+
+#define FM_FD_STAT_RX_ERRORS \
+ (FM_PORT_FRM_ERR_DMA | FM_PORT_FRM_ERR_PHYSICAL | \
+ FM_PORT_FRM_ERR_SIZE | FM_PORT_FRM_ERR_CLS_DISCARD | \
+ FM_PORT_FRM_ERR_EXTRACTION | FM_PORT_FRM_ERR_NO_SCHEME | \
+ FM_PORT_FRM_ERR_PRS_TIMEOUT | FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \
+ FM_PORT_FRM_ERR_PRS_HDR_ERR)
+
+#define FM_FD_STAT_TX_ERRORS \
+ (FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT | \
+ FM_PORT_FRM_ERR_LENGTH | FM_PORT_FRM_ERR_DMA)
+
+/* The raw buffer size must be cacheline aligned.
+ * Normally we use 2K buffers.
+ */
+#define DPA_BP_RAW_SIZE 2048
+
+/* This is what FMan is ever allowed to use.
+ * FMan-DMA requires 16-byte alignment for Rx buffers, but SKB_DATA_ALIGN is
+ * even stronger (SMP_CACHE_BYTES-aligned), so we just get away with that,
+ * via SKB_WITH_OVERHEAD(). We can't rely on netdev_alloc_frag() giving us
+ * half-page-aligned buffers (can we?), so we reserve some more space
+ * for start-of-buffer alignment.
+ */
+#define dpa_bp_size(buffer_layout) (SKB_WITH_OVERHEAD(DPA_BP_RAW_SIZE) - \
+ SMP_CACHE_BYTES)
+/* We must ensure that skb_shinfo is always cacheline-aligned. */
+#define DPA_SKB_SIZE(size) ((size) & ~(SMP_CACHE_BYTES - 1))
+
+/* Largest value that the FQD's OAL field can hold.
+ * This is DPAA-1.x specific.
+ */
+#define FSL_QMAN_MAX_OAL 127
+
+/* Default alignment for start of data in an Rx FD */
+#define DPA_FD_DATA_ALIGNMENT 16
+
+/* Values for the L3R field of the FM Parse Results
+ */
+/* L3 Type field: First IP Present IPv4 */
+#define FM_L3_PARSE_RESULT_IPV4 0x8000
+/* L3 Type field: First IP Present IPv6 */
+#define FM_L3_PARSE_RESULT_IPV6 0x4000
+
+/* Values for the L4R field of the FM Parse Results
+ * See $8.8.4.7.20 - L4 HXS - L4 Results from DPAA-Rev2 Reference Manual.
+ */
+/* L4 Type field: UDP */
+#define FM_L4_PARSE_RESULT_UDP 0x40
+/* L4 Type field: TCP */
+#define FM_L4_PARSE_RESULT_TCP 0x20
+
+#define FM_FD_STAT_ERR_PHYSICAL FM_PORT_FRM_ERR_PHYSICAL
+
+/* number of Tx queues to FMan */
+#define DPAA_ETH_TX_QUEUES NR_CPUS
+
+#define DPAA_ETH_RX_QUEUES 128
+
+#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
+#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
+
+/* More detailed FQ types - used for fine-grained WQ assignments */
+enum dpa_fq_type {
+ FQ_TYPE_RX_DEFAULT = 1, /* Rx Default FQs */
+ FQ_TYPE_RX_ERROR, /* Rx Error FQs */
+ FQ_TYPE_RX_PCD, /* User-defined PCDs */
+ FQ_TYPE_TX, /* "Real" Tx FQs */
+ FQ_TYPE_TX_CONFIRM, /* Tx default Conf FQ (actually an Rx FQ) */
+ FQ_TYPE_TX_CONF_MQ, /* Tx conf FQs (one for each Tx FQ) */
+ FQ_TYPE_TX_ERROR, /* Tx Error FQs (these are actually Rx FQs) */
+};
+
+struct dpa_fq {
+ struct qman_fq fq_base;
+ struct list_head list;
+ struct net_device *net_dev;
+ bool init;
+ u32 fqid;
+ u32 flags;
+ u16 channel;
+ u8 wq;
+ enum dpa_fq_type fq_type;
+};
+
+struct dpa_fq_cbs_t {
+ struct qman_fq rx_defq;
+ struct qman_fq tx_defq;
+ struct qman_fq rx_errq;
+ struct qman_fq tx_errq;
+ struct qman_fq egress_ern;
+};
+
+struct fqid_cell {
+ u32 start;
+ u32 count;
+};
+
+struct dpa_bp {
+ struct bman_pool *pool;
+ u8 bpid;
+ struct device *dev;
+ union {
+ /* The buffer pools used for the private ports are initialized
+ * with target_count buffers for each CPU; at runtime the
+ * number of buffers per CPU is constantly brought back to this
+ * level
+ */
+ int target_count;
+ /* The configured value for the number of buffers in the pool,
+ * used for shared port buffer pools
+ */
+ int config_count;
+ };
+ size_t size;
+ bool seed_pool;
+ /* physical address of the contiguous memory used by the pool to store
+ * the buffers
+ */
+ dma_addr_t paddr;
+ /* virtual address of the contiguous memory used by the pool to store
+ * the buffers
+ */
+ void __iomem *vaddr;
+ /* current number of buffers in the bpool alloted to this CPU */
+ int __percpu *percpu_count;
+ atomic_t refs;
+ /* some bpools need to be seeded before use by this cb */
+ int (*seed_cb)(struct dpa_bp *);
+ /* some bpools need to be emptied before freeing; this cb is used
+ * for freeing of individual buffers taken from the pool
+ */
+ void (*free_buf_cb)(void *addr);
+};
+
+struct dpa_napi_portal {
+ struct napi_struct napi;
+ struct qman_portal *p;
+};
+
+struct dpa_percpu_priv_s {
+ struct net_device *net_dev;
+ struct dpa_napi_portal *np;
+ struct rtnl_link_stats64 stats;
+};
+
+struct dpa_priv_s {
+ struct dpa_percpu_priv_s __percpu *percpu_priv;
+ struct dpa_bp *dpa_bp;
+ /* Store here the needed Tx headroom for convenience and speed
+ * (even though it can be computed based on the fields of buf_layout)
+ */
+ u16 tx_headroom;
+ struct net_device *net_dev;
+ struct mac_device *mac_dev;
+ struct qman_fq *egress_fqs[DPAA_ETH_TX_QUEUES];
+ struct qman_fq *conf_fqs[DPAA_ETH_TX_QUEUES];
+
+ size_t bp_count;
+
+ u16 channel; /* "fsl,qman-channel-id" */
+ struct list_head dpa_fq_list;
+
+ u32 msg_enable; /* net_device message level */
+
+ struct {
+ /**
+ * All egress queues to a given net device belong to one
+ * (and the same) congestion group.
+ */
+ struct qman_cgr cgr;
+ } cgr_data;
+ /* Use a per-port CGR for ingress traffic. */
+ bool use_ingress_cgr;
+ struct qman_cgr ingress_cgr;
+
+ struct dpa_buffer_layout_s *buf_layout;
+ u16 rx_headroom;
+};
+
+struct fm_port_fqs {
+ struct dpa_fq *tx_defq;
+ struct dpa_fq *tx_errq;
+ struct dpa_fq *rx_defq;
+ struct dpa_fq *rx_errq;
+};
+
+int dpa_bp_priv_seed(struct dpa_bp *dpa_bp);
+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *count_ptr);
+void __hot _dpa_rx(struct net_device *net_dev,
+ struct qman_portal *portal,
+ const struct dpa_priv_s *priv,
+ struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid,
+ int *count_ptr);
+int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev);
+struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
+ const struct qm_fd *fd);
+
+/* Turn on HW checksum computation for this outgoing frame.
+ * If the current protocol is not something we support in this regard
+ * (or if the stack has already computed the SW checksum), we do nothing.
+ *
+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
+ * otherwise.
+ *
+ * Note that this function may modify the fd->cmd field and the skb data buffer
+ * (the Parse Results area).
+ */
+int dpa_enable_tx_csum(struct dpa_priv_s *priv, struct sk_buff *skb,
+ struct qm_fd *fd, char *parse_results);
+
+static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv_s *percpu_priv,
+ struct qman_portal *portal)
+{
+ /* In case of threaded ISR for RT enable kernel,
+ * in_irq() does not return appropriate value, so use
+ * in_serving_softirq to distinguish softirq or irq context.
+ */
+ if (unlikely(in_irq() || !in_serving_softirq())) {
+ /* Disable QMan IRQ and invoke NAPI */
+ int ret = qman_p_irqsource_remove(portal, QM_PIRQ_DQRI);
+
+ if (likely(!ret)) {
+ const struct qman_portal_config *pc =
+ qman_p_get_portal_config(portal);
+ struct dpa_napi_portal *np =
+ &percpu_priv->np[pc->channel];
+
+ np->p = portal;
+ napi_schedule(&np->napi);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static inline ssize_t __const __must_check __attribute__((nonnull))
+dpa_fd_length(const struct qm_fd *fd)
+{
+ return fd->length20;
+}
+
+static inline ssize_t __const __must_check __attribute__((nonnull))
+dpa_fd_offset(const struct qm_fd *fd)
+{
+ return fd->offset;
+}
+
+/* Verifies if the skb length is below the interface MTU */
+static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
+{
+ if (unlikely(skb->len > mtu))
+ if ((skb->protocol != ETH_P_8021Q) || (skb->len > mtu + 4))
+ return -1;
+
+ return 0;
+}
+
+static inline u16 dpa_get_headroom(struct dpa_buffer_layout_s *bl)
+{
+ u16 headroom;
+ /* The frame headroom must accommodate:
+ * - the driver private data area
+ * - parse results, hash results, timestamp if selected
+ * If either hash results or time stamp are selected, both will
+ * be copied to/from the frame headroom, as TS is located between PR and
+ * HR in the IC and IC copy size has a granularity of 16bytes
+ * (see description of FMBM_RICP and FMBM_TICP registers in DPAARM)
+ *
+ * Also make sure the headroom is a multiple of data_align bytes
+ */
+ headroom = (u16)(bl->priv_data_size +
+ (bl->parse_results ? DPA_PARSE_RESULTS_SIZE : 0) +
+ (bl->hash_results || bl->time_stamp ?
+ DPA_TIME_STAMP_SIZE + DPA_HASH_RESULTS_SIZE : 0));
+
+ return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
+}
+
+
+void dpa_private_napi_del(struct net_device *net_dev);
+
+static inline void clear_fd(struct qm_fd *fd)
+{
+ fd->opaque_addr = 0;
+ fd->opaque = 0;
+ fd->cmd = 0;
+}
+
+static inline struct qman_fq *_dpa_get_tx_conf_queue(
+ const struct dpa_priv_s *priv,
+ struct qman_fq *tx_fq)
+{
+ int i;
+
+ for (i = 0; i < DPAA_ETH_TX_QUEUES; i++)
+ if (priv->egress_fqs[i] == tx_fq)
+ return priv->conf_fqs[i];
+
+ return NULL;
+}
+
+static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
+ struct rtnl_link_stats64 *percpu_stats,
+ int queue,
+ struct qm_fd *fd)
+{
+ int err, i;
+ struct qman_fq *egress_fq;
+
+ egress_fq = priv->egress_fqs[queue];
+ if (fd->bpid == 0xff)
+ fd->cmd |= qman_fq_fqid(
+ _dpa_get_tx_conf_queue(priv, egress_fq)
+ );
+
+ for (i = 0; i < 100000; i++) {
+ err = qman_enqueue(egress_fq, fd, 0);
+ if (err != -EBUSY)
+ break;
+ }
+
+ if (unlikely(err < 0)) {
+ percpu_stats->tx_errors++;
+ percpu_stats->tx_fifo_errors++;
+ return err;
+ }
+
+ percpu_stats->tx_packets++;
+ percpu_stats->tx_bytes += dpa_fd_length(fd);
+
+ return 0;
+}
+
+/* Use multiple WQs for FQ assignment:
+ * - Tx Confirmation queues go to WQ1.
+ * - Rx Default and Tx queues go to WQ3 (no differentiation between
+ * Rx and Tx traffic).
+ * - Rx Error and Tx Error queues go to WQ2 (giving them a better chance
+ * to be scheduled, in case there are many more FQs in WQ3).
+ * This ensures that Tx-confirmed buffers are timely released. In particular,
+ * it avoids congestion on the Tx Confirm FQs, which can pile up PFDRs if they
+ * are greatly outnumbered by other FQs in the system, while
+ * dequeue scheduling is round-robin.
+ */
+static inline void _dpa_assign_wq(struct dpa_fq *fq)
+{
+ switch (fq->fq_type) {
+ case FQ_TYPE_TX_CONFIRM:
+ case FQ_TYPE_TX_CONF_MQ:
+ fq->wq = 1;
+ break;
+ case FQ_TYPE_RX_DEFAULT:
+ case FQ_TYPE_TX:
+ fq->wq = 3;
+ break;
+ case FQ_TYPE_RX_ERROR:
+ case FQ_TYPE_TX_ERROR:
+ fq->wq = 2;
+ break;
+ default:
+ WARN(1, "Invalid FQ type %d for FQID %d!\n",
+ fq->fq_type, fq->fqid);
+ }
+}
+
+/* Use the queue selected by XPS */
+#define dpa_get_queue_mapping(skb) \
+ skb_get_queue_mapping(skb)
+
+static inline void _dpa_bp_free_pf(void *addr)
+{
+ put_page(virt_to_head_page(addr));
+}
+
+#endif /* __DPA_H */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
new file mode 100644
index 0000000..7094a45
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -0,0 +1,1288 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_net.h>
+#include <linux/etherdevice.h>
+#include <linux/kthread.h>
+#include <linux/percpu.h>
+#include <linux/highmem.h>
+#include <linux/sort.h>
+#include <soc/fsl/qman.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/if_vlan.h> /* vlan_eth_hdr */
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+#include "mac.h"
+
+/* Size in bytes of the FQ taildrop threshold */
+#define DPA_FQ_TD 0x200000
+
+static struct dpa_bp *dpa_bp_array[64];
+
+int dpa_max_frm;
+EXPORT_SYMBOL(dpa_max_frm);
+
+int dpa_rx_extra_headroom;
+EXPORT_SYMBOL(dpa_rx_extra_headroom);
+
+static const struct fqid_cell tx_confirm_fqids[] = {
+ {0, DPAA_ETH_TX_QUEUES}
+};
+
+static const struct fqid_cell default_fqids[][3] = {
+ [RX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_RX_QUEUES} },
+ [TX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_TX_QUEUES} }
+};
+
+int dpa_netdev_init(struct net_device *net_dev,
+ const u8 *mac_addr,
+ u16 tx_timeout)
+{
+ int err;
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ struct device *dev = net_dev->dev.parent;
+
+ net_dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+
+ net_dev->features |= net_dev->hw_features;
+ net_dev->vlan_features = net_dev->features;
+
+ memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
+ memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
+
+ net_dev->needed_headroom = priv->tx_headroom;
+ net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
+
+ err = register_netdev(net_dev);
+ if (err < 0) {
+ dev_err(dev, "register_netdev() = %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dpa_netdev_init);
+
+int __cold dpa_start(struct net_device *net_dev)
+{
+ int err, i;
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ err = mac_dev->init_phy(net_dev, priv->mac_dev);
+ if (err < 0) {
+ if (netif_msg_ifup(priv))
+ netdev_err(net_dev, "init_phy() = %d\n", err);
+ return err;
+ }
+
+ for_each_port_device(i, mac_dev->port_dev) {
+ err = fm_port_enable(mac_dev->port_dev[i]);
+ if (err)
+ goto mac_start_failed;
+ }
+
+ err = priv->mac_dev->start(mac_dev);
+ if (err < 0) {
+ if (netif_msg_ifup(priv))
+ netdev_err(net_dev, "mac_dev->start() = %d\n", err);
+ goto mac_start_failed;
+ }
+
+ netif_tx_start_all_queues(net_dev);
+
+ return 0;
+
+mac_start_failed:
+ for_each_port_device(i, mac_dev->port_dev)
+ fm_port_disable(mac_dev->port_dev[i]);
+
+ return err;
+}
+EXPORT_SYMBOL(dpa_start);
+
+int __cold dpa_stop(struct net_device *net_dev)
+{
+ int _errno, i, err;
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ netif_tx_stop_all_queues(net_dev);
+ /* Allow the Fman (Tx) port to process in-flight frames before we
+ * try switching it off.
+ */
+ usleep_range(5000, 10000);
+
+ _errno = mac_dev->stop(mac_dev);
+ if (unlikely(_errno < 0))
+ if (netif_msg_ifdown(priv))
+ netdev_err(net_dev, "mac_dev->stop() = %d\n",
+ _errno);
+
+ for_each_port_device(i, mac_dev->port_dev) {
+ err = fm_port_disable(mac_dev->port_dev[i]);
+ _errno = err ? err : _errno;
+ }
+
+ if (mac_dev->phy_dev)
+ phy_disconnect(mac_dev->phy_dev);
+ mac_dev->phy_dev = NULL;
+
+ return _errno;
+}
+EXPORT_SYMBOL(dpa_stop);
+
+void __cold dpa_timeout(struct net_device *net_dev)
+{
+ const struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv;
+
+ priv = netdev_priv(net_dev);
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+
+ if (netif_msg_timer(priv))
+ netdev_crit(net_dev, "Transmit timeout latency: %u ms\n",
+ jiffies_to_msecs(jiffies - net_dev->trans_start));
+
+ percpu_priv->stats.tx_errors++;
+}
+EXPORT_SYMBOL(dpa_timeout);
+
+/* net_device */
+
+/**
+ * @param net_dev the device for which statistics are calculated
+ * @param stats the function fills this structure with the device's statistics
+ * @return the address of the structure containing the statistics
+ *
+ * Calculates the statistics for the given device by adding the statistics
+ * collected by each CPU.
+ */
+struct rtnl_link_stats64 * __cold
+dpa_get_stats64(struct net_device *net_dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+ u64 *cpustats;
+ u64 *netstats = (u64 *)stats;
+ int i, j;
+ struct dpa_percpu_priv_s *percpu_priv;
+ int numstats = sizeof(struct rtnl_link_stats64) / sizeof(u64);
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ cpustats = (u64 *)&percpu_priv->stats;
+
+ for (j = 0; j < numstats; j++)
+ netstats[j] += cpustats[j];
+ }
+
+ return stats;
+}
+EXPORT_SYMBOL(dpa_get_stats64);
+
+int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+ const int max_mtu = dpa_get_max_mtu();
+
+ /* Make sure we don't exceed the Ethernet controller's MAXFRM */
+ if (new_mtu < 68 || new_mtu > max_mtu) {
+ netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
+ new_mtu, 68, max_mtu);
+ return -EINVAL;
+ }
+ net_dev->mtu = new_mtu;
+
+ return 0;
+}
+EXPORT_SYMBOL(dpa_change_mtu);
+
+/* .ndo_init callback */
+int dpa_ndo_init(struct net_device *net_dev)
+{
+ /* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
+ * we choose conservatively and let the user explicitly set a higher
+ * MTU via ifconfig. Otherwise, the user may end up with different MTUs
+ * in the same LAN.
+ * If on the other hand fsl_fm_max_frm has been chosen below 1500,
+ * start with the maximum allowed.
+ */
+ int init_mtu = min(dpa_get_max_mtu(), ETH_DATA_LEN);
+
+ pr_debug("Setting initial MTU on net device: %d\n", init_mtu);
+ net_dev->mtu = init_mtu;
+
+ return 0;
+}
+EXPORT_SYMBOL(dpa_ndo_init);
+
+int dpa_set_features(struct net_device *dev, netdev_features_t features)
+{
+ /* Not much to do here for now */
+ dev->features = features;
+ return 0;
+}
+EXPORT_SYMBOL(dpa_set_features);
+
+netdev_features_t dpa_fix_features(struct net_device *dev,
+ netdev_features_t features)
+{
+ netdev_features_t unsupported_features = 0;
+
+ /* In theory we should never be requested to enable features that
+ * we didn't set in netdev->features and netdev->hw_features at probe
+ * time, but double check just to be on the safe side.
+ * We don't support enabling Rx csum through ethtool yet
+ */
+ unsupported_features |= NETIF_F_RXCSUM;
+
+ features &= ~unsupported_features;
+
+ return features;
+}
+EXPORT_SYMBOL(dpa_fix_features);
+
+int __cold dpa_remove(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev;
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+
+ dev = &pdev->dev;
+ net_dev = dev_get_drvdata(dev);
+
+ priv = netdev_priv(net_dev);
+
+ dev_set_drvdata(dev, NULL);
+ unregister_netdev(net_dev);
+
+ err = dpa_fq_free(dev, &priv->dpa_fq_list);
+
+ qman_delete_cgr_safe(&priv->ingress_cgr);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+ qman_delete_cgr_safe(&priv->cgr_data.cgr);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+
+ dpa_private_napi_del(net_dev);
+
+ dpa_bp_free(priv);
+
+ if (priv->buf_layout)
+ devm_kfree(dev, priv->buf_layout);
+
+ free_netdev(net_dev);
+
+ return err;
+}
+EXPORT_SYMBOL(dpa_remove);
+
+struct mac_device * __cold __must_check
+__attribute__((nonnull))
+dpa_mac_dev_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev, *dev;
+ struct device_node *mac_node;
+ struct platform_device *of_dev;
+ struct mac_device *mac_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+ if (!eth_data)
+ return ERR_PTR(-ENODEV);
+
+ mac_node = eth_data->mac_node;
+
+ of_dev = of_find_device_by_node(mac_node);
+ if (unlikely(!of_dev)) {
+ dev_err(dpa_dev, "of_find_device_by_node(%s) failed\n",
+ mac_node->full_name);
+ of_node_put(mac_node);
+ return ERR_PTR(-EINVAL);
+ }
+ of_node_put(mac_node);
+
+ dev = &of_dev->dev;
+
+ mac_dev = dev_get_drvdata(dev);
+ if (unlikely(!mac_dev)) {
+ dev_err(dpa_dev, "dev_get_drvdata(%s) failed\n",
+ dev_name(dev));
+ return ERR_PTR(-EINVAL);
+ }
+
+ return mac_dev;
+}
+EXPORT_SYMBOL(dpa_mac_dev_get);
+
+int dpa_mac_hw_index_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+
+ return eth_data->mac_hw_id;
+}
+
+int dpa_mac_fman_index_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+
+ return eth_data->fman_hw_id;
+}
+
+int dpa_set_mac_address(struct net_device *net_dev, void *addr)
+{
+ const struct dpa_priv_s *priv;
+ int _errno;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+
+ _errno = eth_mac_addr(net_dev, addr);
+ if (_errno < 0) {
+ if (netif_msg_drv(priv))
+ netdev_err(net_dev,
+ "eth_mac_addr() = %d\n",
+ _errno);
+ return _errno;
+ }
+
+ mac_dev = priv->mac_dev;
+
+ _errno = mac_dev->change_addr(mac_dev->get_mac_handle(mac_dev),
+ (enet_addr_t *)net_dev->dev_addr);
+ if (_errno < 0) {
+ if (netif_msg_drv(priv))
+ netdev_err(net_dev,
+ "mac_dev->change_addr() = %d\n",
+ _errno);
+ return _errno;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dpa_set_mac_address);
+
+void dpa_set_rx_mode(struct net_device *net_dev)
+{
+ int _errno;
+ const struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!!(net_dev->flags & IFF_PROMISC) != priv->mac_dev->promisc) {
+ priv->mac_dev->promisc = !priv->mac_dev->promisc;
+ _errno = priv->mac_dev->set_promisc(
+ priv->mac_dev->get_mac_handle(priv->mac_dev),
+ priv->mac_dev->promisc);
+ if (unlikely(_errno < 0) && netif_msg_drv(priv))
+ netdev_err(net_dev,
+ "mac_dev->set_promisc() = %d\n",
+ _errno);
+ }
+
+ _errno = priv->mac_dev->set_multi(net_dev, priv->mac_dev);
+ if (unlikely(_errno < 0) && netif_msg_drv(priv))
+ netdev_err(net_dev, "mac_dev->set_multi() = %d\n", _errno);
+}
+EXPORT_SYMBOL(dpa_set_rx_mode);
+
+void dpa_set_buffers_layout(struct mac_device *mac_dev,
+ struct dpa_buffer_layout_s *layout)
+{
+ struct fm_port_params params;
+
+ /* Rx */
+ layout[RX].priv_data_size = (u16)DPA_RX_PRIV_DATA_SIZE;
+ layout[RX].parse_results = true;
+ layout[RX].hash_results = true;
+
+ fm_port_get_buff_layout_ext_params(mac_dev->port_dev[RX], ¶ms);
+ /* a value of zero for data alignment means "don't care", so align to
+ * a non-zero value to prevent FMD from using its own default
+ */
+ layout[RX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
+
+ /* Tx */
+ layout[TX].priv_data_size = DPA_TX_PRIV_DATA_SIZE;
+ layout[TX].parse_results = true;
+ layout[TX].hash_results = true;
+
+ fm_port_get_buff_layout_ext_params(mac_dev->port_dev[TX], ¶ms);
+ layout[TX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
+}
+EXPORT_SYMBOL(dpa_set_buffers_layout);
+
+int __attribute__((nonnull))
+dpa_bp_alloc(struct dpa_bp *dpa_bp)
+{
+ int err;
+ struct bman_pool_params bp_params;
+ struct platform_device *pdev;
+
+ if (dpa_bp->size == 0 || dpa_bp->config_count == 0) {
+ pr_err("Buffer pool is not properly initialized! Missing size or initial number of buffers");
+ return -EINVAL;
+ }
+
+ memset(&bp_params, 0, sizeof(struct bman_pool_params));
+
+ /* If the pool is already specified, we only create one per bpid */
+ if (dpa_bpid2pool_use(dpa_bp->bpid))
+ return 0;
+
+ if (dpa_bp->bpid == 0)
+ bp_params.flags |= BMAN_POOL_FLAG_DYNAMIC_BPID;
+ else
+ bp_params.bpid = dpa_bp->bpid;
+
+ dpa_bp->pool = bman_new_pool(&bp_params);
+ if (unlikely(!dpa_bp->pool)) {
+ pr_err("bman_new_pool() failed\n");
+ return -ENODEV;
+ }
+
+ dpa_bp->bpid = (u8)bman_get_params(dpa_bp->pool)->bpid;
+
+ pdev = platform_device_register_simple("DPAA_bpool",
+ dpa_bp->bpid, NULL, 0);
+ if (IS_ERR(pdev)) {
+ err = PTR_ERR(pdev);
+ goto pdev_register_failed;
+ }
+
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(40));
+ if (err)
+ goto pdev_mask_failed;
+
+ dpa_bp->dev = &pdev->dev;
+
+ if (dpa_bp->seed_cb) {
+ err = dpa_bp->seed_cb(dpa_bp);
+ if (err)
+ goto pool_seed_failed;
+ }
+
+ dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
+
+ return 0;
+
+pool_seed_failed:
+pdev_mask_failed:
+ platform_device_unregister(pdev);
+pdev_register_failed:
+ bman_free_pool(dpa_bp->pool);
+
+ return err;
+}
+EXPORT_SYMBOL(dpa_bp_alloc);
+
+void dpa_bp_drain(struct dpa_bp *bp)
+{
+ int ret;
+ u8 num = 8;
+
+ do {
+ struct bm_buffer bmb[8];
+ int i;
+
+ ret = bman_acquire(bp->pool, bmb, num, 0);
+ if (ret < 0) {
+ if (num == 8) {
+ /* we have less than 8 buffers left;
+ * drain them one by one
+ */
+ num = 1;
+ ret = 1;
+ continue;
+ } else {
+ /* Pool is fully drained */
+ break;
+ }
+ }
+
+ for (i = 0; i < num; i++) {
+ dma_addr_t addr = bm_buf_addr(&bmb[i]);
+
+ dma_unmap_single(bp->dev, addr, bp->size,
+ DMA_BIDIRECTIONAL);
+
+ bp->free_buf_cb(phys_to_virt(addr));
+ }
+ } while (ret > 0);
+}
+
+static void __cold __attribute__((nonnull))
+_dpa_bp_free(struct dpa_bp *dpa_bp)
+{
+ struct dpa_bp *bp = dpa_bpid2pool(dpa_bp->bpid);
+
+ /* the mapping between bpid and dpa_bp is done very late in the
+ * allocation procedure; if something failed before the mapping, the bp
+ * was not configured, therefore we don't need the below instructions
+ */
+ if (!bp)
+ return;
+
+ if (!atomic_dec_and_test(&bp->refs))
+ return;
+
+ if (bp->free_buf_cb)
+ dpa_bp_drain(bp);
+
+ dpa_bp_array[bp->bpid] = NULL;
+ bman_free_pool(bp->pool);
+
+ if (bp->dev)
+ platform_device_unregister(to_platform_device(bp->dev));
+}
+
+void __cold __attribute__((nonnull))
+dpa_bp_free(struct dpa_priv_s *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->bp_count; i++)
+ _dpa_bp_free(&priv->dpa_bp[i]);
+}
+EXPORT_SYMBOL(dpa_bp_free);
+
+struct dpa_bp *dpa_bpid2pool(int bpid)
+{
+ return dpa_bp_array[bpid];
+}
+EXPORT_SYMBOL(dpa_bpid2pool);
+
+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp)
+{
+ dpa_bp_array[bpid] = dpa_bp;
+ atomic_set(&dpa_bp->refs, 1);
+}
+
+bool dpa_bpid2pool_use(int bpid)
+{
+ if (dpa_bpid2pool(bpid)) {
+ atomic_inc(&dpa_bp_array[bpid]->refs);
+ return true;
+ }
+
+ return false;
+}
+
+struct dpa_fq *dpa_fq_alloc(struct device *dev,
+ const struct fqid_cell *fqids,
+ struct list_head *list,
+ enum dpa_fq_type fq_type)
+{
+ int i;
+ struct dpa_fq *dpa_fq;
+
+ dpa_fq = devm_kzalloc(dev, sizeof(*dpa_fq) * fqids->count, GFP_KERNEL);
+ if (!dpa_fq)
+ return NULL;
+
+ for (i = 0; i < fqids->count; i++) {
+ dpa_fq[i].fq_type = fq_type;
+ dpa_fq[i].fqid = fqids->start ? fqids->start + i : 0;
+ list_add_tail(&dpa_fq[i].list, list);
+ }
+
+ for (i = 0; i < fqids->count; i++)
+ _dpa_assign_wq(dpa_fq + i);
+
+ return dpa_fq;
+}
+EXPORT_SYMBOL(dpa_fq_alloc);
+
+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
+ struct fm_port_fqs *port_fqs,
+ bool alloc_tx_conf_fqs,
+ enum port_type ptype)
+{
+ const struct fqid_cell *fqids;
+ struct dpa_fq *dpa_fq;
+ int num_ranges;
+ int i;
+
+ if (ptype == TX && alloc_tx_conf_fqs) {
+ if (!dpa_fq_alloc(dev, tx_confirm_fqids, list,
+ FQ_TYPE_TX_CONF_MQ))
+ goto fq_alloc_failed;
+ }
+
+ fqids = default_fqids[ptype];
+ num_ranges = 3;
+
+ for (i = 0; i < num_ranges; i++) {
+ switch (i) {
+ case 0:
+ /* The first queue is the error queue */
+ if (fqids[i].count != 1)
+ goto invalid_error_queue;
+
+ dpa_fq = dpa_fq_alloc(dev, &fqids[i], list,
+ ptype == RX ?
+ FQ_TYPE_RX_ERROR :
+ FQ_TYPE_TX_ERROR);
+ if (!dpa_fq)
+ goto fq_alloc_failed;
+
+ if (ptype == RX)
+ port_fqs->rx_errq = &dpa_fq[0];
+ else
+ port_fqs->tx_errq = &dpa_fq[0];
+ break;
+ case 1:
+ /* the second queue is the default queue */
+ if (fqids[i].count != 1)
+ goto invalid_default_queue;
+
+ dpa_fq = dpa_fq_alloc(dev, &fqids[i], list,
+ ptype == RX ?
+ FQ_TYPE_RX_DEFAULT :
+ FQ_TYPE_TX_CONFIRM);
+ if (!dpa_fq)
+ goto fq_alloc_failed;
+
+ if (ptype == RX)
+ port_fqs->rx_defq = &dpa_fq[0];
+ else
+ port_fqs->tx_defq = &dpa_fq[0];
+ break;
+ default:
+ /* all subsequent queues are Tx */
+ if (!dpa_fq_alloc(dev, &fqids[i], list, FQ_TYPE_TX))
+ goto fq_alloc_failed;
+ break;
+ }
+ }
+
+ return 0;
+
+fq_alloc_failed:
+ dev_err(dev, "dpa_fq_alloc() failed\n");
+ return -ENOMEM;
+
+invalid_default_queue:
+invalid_error_queue:
+ dev_err(dev, "Too many default or error queues\n");
+ return -EINVAL;
+}
+EXPORT_SYMBOL(dpa_fq_probe_mac);
+
+static u32 rx_pool_channel;
+static DEFINE_SPINLOCK(rx_pool_channel_init);
+
+int dpa_get_channel(void)
+{
+ spin_lock(&rx_pool_channel_init);
+ if (!rx_pool_channel) {
+ u32 pool;
+ int ret = qman_alloc_pool(&pool);
+
+ if (!ret)
+ rx_pool_channel = pool;
+ }
+ spin_unlock(&rx_pool_channel_init);
+ if (!rx_pool_channel)
+ return -ENOMEM;
+ return rx_pool_channel;
+}
+EXPORT_SYMBOL(dpa_get_channel);
+
+void dpa_release_channel(void)
+{
+ qman_release_pool(rx_pool_channel);
+}
+EXPORT_SYMBOL(dpa_release_channel);
+
+int dpaa_eth_add_channel(void *__arg)
+{
+ const cpumask_t *cpus = qman_affine_cpus();
+ u32 pool = QM_SDQCR_CHANNELS_POOL_CONV((u16)(unsigned long)__arg);
+ int cpu;
+ struct qman_portal *portal;
+
+ for_each_cpu(cpu, cpus) {
+ portal = (struct qman_portal *)qman_get_affine_portal(cpu);
+ qman_p_static_dequeue_add(portal, pool);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(dpaa_eth_add_channel);
+
+/**
+ * Congestion group state change notification callback.
+ * Stops the device's egress queues while they are congested and
+ * wakes them upon exiting congested state.
+ * Also updates some CGR-related stats.
+ */
+static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
+ int congested)
+{
+ struct dpa_priv_s *priv = (struct dpa_priv_s *)container_of(cgr,
+ struct dpa_priv_s, cgr_data.cgr);
+
+ if (congested)
+ netif_tx_stop_all_queues(priv->net_dev);
+ else
+ netif_tx_wake_all_queues(priv->net_dev);
+}
+
+int dpaa_eth_cgr_init(struct dpa_priv_s *priv)
+{
+ struct qm_mcc_initcgr initcgr;
+ u32 cs_th;
+ int err;
+
+ err = qman_alloc_cgrid(&priv->cgr_data.cgr.cgrid);
+ if (err < 0) {
+ pr_err("Error %d allocating CGR ID\n", err);
+ goto out_error;
+ }
+ priv->cgr_data.cgr.cb = dpaa_eth_cgscn;
+
+ /* Enable Congestion State Change Notifications and CS taildrop */
+ initcgr.we_mask = QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES;
+ initcgr.cgr.cscn_en = QM_CGR_EN;
+
+ /* Set different thresholds based on the MAC speed.
+ * This may turn suboptimal if the MAC is reconfigured at a speed
+ * lower than its max, e.g. if a dTSEC later negotiates a 100Mbps link.
+ * In such cases, we ought to reconfigure the threshold, too.
+ */
+ if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
+ cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
+ else
+ cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
+ qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
+
+ initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
+ initcgr.cgr.cstd_en = QM_CGR_EN;
+
+ err = qman_create_cgr(&priv->cgr_data.cgr, QMAN_CGR_FLAG_USE_INIT,
+ &initcgr);
+ if (err < 0) {
+ pr_err("Error %d creating CGR with ID %d\n", err,
+ priv->cgr_data.cgr.cgrid);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+ goto out_error;
+ }
+ pr_debug("Created CGR %d for netdev with hwaddr %pM on QMan channel %d\n",
+ priv->cgr_data.cgr.cgrid, priv->mac_dev->addr,
+ priv->cgr_data.cgr.chan);
+
+out_error:
+ return err;
+}
+EXPORT_SYMBOL(dpaa_eth_cgr_init);
+
+static inline void dpa_setup_ingress(const struct dpa_priv_s *priv,
+ struct dpa_fq *fq,
+ const struct qman_fq *template)
+{
+ fq->fq_base = *template;
+ fq->net_dev = priv->net_dev;
+
+ fq->flags = QMAN_FQ_FLAG_NO_ENQUEUE;
+ fq->channel = priv->channel;
+}
+
+static inline void dpa_setup_egress(const struct dpa_priv_s *priv,
+ struct dpa_fq *fq,
+ struct fm_port *port,
+ const struct qman_fq *template)
+{
+ fq->fq_base = *template;
+ fq->net_dev = priv->net_dev;
+
+ if (port) {
+ fq->flags = QMAN_FQ_FLAG_TO_DCPORTAL;
+ fq->channel = (u16)fm_get_tx_port_channel(port);
+ } else {
+ fq->flags = QMAN_FQ_FLAG_NO_MODIFY;
+ }
+}
+
+void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
+ struct fm_port *tx_port)
+{
+ struct dpa_fq *fq;
+ u16 portals[NR_CPUS];
+ int cpu, num_portals = 0;
+ const cpumask_t *affine_cpus = qman_affine_cpus();
+ int egress_cnt = 0, conf_cnt = 0;
+
+ for_each_cpu(cpu, affine_cpus)
+ portals[num_portals++] = qman_affine_channel(cpu);
+ if (num_portals == 0)
+ dev_err(priv->net_dev->dev.parent,
+ "No Qman software (affine) channels found");
+
+ /* Initialize each FQ in the list */
+ list_for_each_entry(fq, &priv->dpa_fq_list, list) {
+ switch (fq->fq_type) {
+ case FQ_TYPE_RX_DEFAULT:
+ BUG_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
+ break;
+ case FQ_TYPE_RX_ERROR:
+ BUG_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->rx_errq);
+ break;
+ case FQ_TYPE_TX:
+ dpa_setup_egress(priv, fq, tx_port,
+ &fq_cbs->egress_ern);
+ /* If we have more Tx queues than the number of cores,
+ * just ignore the extra ones.
+ */
+ if (egress_cnt < DPAA_ETH_TX_QUEUES)
+ priv->egress_fqs[egress_cnt++] = &fq->fq_base;
+ break;
+ case FQ_TYPE_TX_CONFIRM:
+ BUG_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
+ break;
+ case FQ_TYPE_TX_CONF_MQ:
+ BUG_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
+ priv->conf_fqs[conf_cnt++] = &fq->fq_base;
+ break;
+ case FQ_TYPE_TX_ERROR:
+ BUG_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_errq);
+ break;
+ default:
+ dev_warn(priv->net_dev->dev.parent,
+ "Unknown FQ type detected!\n");
+ break;
+ }
+ }
+
+ /* The number of Tx queues may be smaller than the number of cores, if
+ * the Tx queue range is specified in the device tree instead of being
+ * dynamically allocated.
+ * Make sure all CPUs receive a corresponding Tx queue.
+ */
+ while (egress_cnt < DPAA_ETH_TX_QUEUES) {
+ list_for_each_entry(fq, &priv->dpa_fq_list, list) {
+ if (fq->fq_type != FQ_TYPE_TX)
+ continue;
+ priv->egress_fqs[egress_cnt++] = &fq->fq_base;
+ if (egress_cnt == DPAA_ETH_TX_QUEUES)
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(dpa_fq_setup);
+
+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable)
+{
+ int _errno;
+ const struct dpa_priv_s *priv;
+ struct device *dev;
+ struct qman_fq *fq;
+ struct qm_mcc_initfq initfq;
+ struct qman_fq *confq;
+
+ priv = netdev_priv(dpa_fq->net_dev);
+ dev = dpa_fq->net_dev->dev.parent;
+
+ if (dpa_fq->fqid == 0)
+ dpa_fq->flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
+
+ dpa_fq->init = !(dpa_fq->flags & QMAN_FQ_FLAG_NO_MODIFY);
+
+ _errno = qman_create_fq(dpa_fq->fqid, dpa_fq->flags, &dpa_fq->fq_base);
+ if (_errno) {
+ dev_err(dev, "qman_create_fq() failed\n");
+ return _errno;
+ }
+ fq = &dpa_fq->fq_base;
+
+ if (dpa_fq->init) {
+ initfq.we_mask = QM_INITFQ_WE_FQCTRL;
+ /* FIXME: why would we want to keep an empty FQ in cache? */
+ initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
+
+ /* Try to reduce the number of portal interrupts for
+ * Tx Confirmation FQs.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM)
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_HOLDACTIVE;
+
+ /* FQ placement */
+ initfq.we_mask |= QM_INITFQ_WE_DESTWQ;
+
+ initfq.fqd.dest.channel = dpa_fq->channel;
+ initfq.fqd.dest.wq = dpa_fq->wq;
+
+ /* Put all egress queues in a congestion group of their own.
+ * Sensu stricto, the Tx confirmation queues are Rx FQs,
+ * rather than Tx - but they nonetheless account for the
+ * memory footprint on behalf of egress traffic. We therefore
+ * place them in the netdev's CGR, along with the Tx FQs.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX ||
+ dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM ||
+ dpa_fq->fq_type == FQ_TYPE_TX_CONF_MQ) {
+ initfq.we_mask |= QM_INITFQ_WE_CGID;
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
+ initfq.fqd.cgid = (u8)priv->cgr_data.cgr.cgrid;
+ /* Set a fixed overhead accounting, in an attempt to
+ * reduce the impact of fixed-size skb shells and the
+ * driver's needed headroom on system memory. This is
+ * especially the case when the egress traffic is
+ * composed of small datagrams.
+ * Unfortunately, QMan's OAL value is capped to an
+ * insufficient value, but even that is better than
+ * no overhead accounting at all.
+ */
+ initfq.we_mask |= QM_INITFQ_WE_OAC;
+ initfq.fqd.oac_init.oac = QM_OAC_CG;
+ initfq.fqd.oac_init.oal =
+ (signed char)(min(sizeof(struct sk_buff) +
+ priv->tx_headroom,
+ (size_t)FSL_QMAN_MAX_OAL));
+ }
+
+ if (td_enable) {
+ initfq.we_mask |= QM_INITFQ_WE_TDTHRESH;
+ qm_fqd_taildrop_set(&initfq.fqd.td,
+ DPA_FQ_TD, 1);
+ initfq.fqd.fq_ctrl = QM_FQCTRL_TDE;
+ }
+
+ /* Configure the Tx confirmation queue, now that we know
+ * which Tx queue it pairs with.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX) {
+ confq = _dpa_get_tx_conf_queue(priv, &dpa_fq->fq_base);
+ if (confq) {
+ initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
+ /* ContextA: OVOM=1 (use contextA2 bits instead of ICAD)
+ * A2V=1 (contextA A2 field is valid)
+ * A0V=1 (contextA A0 field is valid)
+ * ContextA A2: EBD=1 (deallocate buffers inside FMan)
+ */
+ initfq.fqd.context_a.hi = 0x1a000000;
+ initfq.fqd.context_a.lo = 0x80000000;
+ }
+ }
+
+ /* Put all *private* ingress queues in our "ingress CGR". */
+ if (priv->use_ingress_cgr &&
+ (dpa_fq->fq_type == FQ_TYPE_RX_DEFAULT ||
+ dpa_fq->fq_type == FQ_TYPE_RX_ERROR)) {
+ initfq.we_mask |= QM_INITFQ_WE_CGID;
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
+ initfq.fqd.cgid = (u8)priv->ingress_cgr.cgrid;
+ /* Set a fixed overhead accounting, just like for the
+ * egress CGR.
+ */
+ initfq.we_mask |= QM_INITFQ_WE_OAC;
+ initfq.fqd.oac_init.oac = QM_OAC_CG;
+ initfq.fqd.oac_init.oal =
+ (signed char)(min(sizeof(struct sk_buff) +
+ priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
+ }
+
+ /* Initialization common to all ingress queues */
+ if (dpa_fq->flags & QMAN_FQ_FLAG_NO_ENQUEUE) {
+ initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
+ initfq.fqd.fq_ctrl |=
+ QM_FQCTRL_CTXASTASHING | QM_FQCTRL_AVOIDBLOCK;
+ initfq.fqd.context_a.stashing.exclusive =
+ QM_STASHING_EXCL_DATA | QM_STASHING_EXCL_CTX |
+ QM_STASHING_EXCL_ANNOTATION;
+ initfq.fqd.context_a.stashing.data_cl = 2;
+ initfq.fqd.context_a.stashing.annotation_cl = 1;
+ initfq.fqd.context_a.stashing.context_cl =
+ DIV_ROUND_UP(sizeof(struct qman_fq), 64);
+ }
+
+ _errno = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &initfq);
+ if (_errno < 0) {
+ dev_err(dev, "qman_init_fq(%u) = %d\n",
+ qman_fq_fqid(fq), _errno);
+ qman_destroy_fq(fq, 0);
+ return _errno;
+ }
+ }
+
+ dpa_fq->fqid = qman_fq_fqid(fq);
+
+ return 0;
+}
+EXPORT_SYMBOL(dpa_fq_init);
+
+static int __cold __attribute__((nonnull))
+_dpa_fq_free(struct device *dev, struct qman_fq *fq)
+{
+ int _errno, __errno;
+ struct dpa_fq *dpa_fq;
+ const struct dpa_priv_s *priv;
+
+ _errno = 0;
+
+ dpa_fq = container_of(fq, struct dpa_fq, fq_base);
+ priv = netdev_priv(dpa_fq->net_dev);
+
+ if (dpa_fq->init) {
+ _errno = qman_retire_fq(fq, NULL);
+ if (unlikely(_errno < 0) && netif_msg_drv(priv))
+ dev_err(dev, "qman_retire_fq(%u) = %d\n",
+ qman_fq_fqid(fq), _errno);
+
+ __errno = qman_oos_fq(fq);
+ if (unlikely(__errno < 0) && netif_msg_drv(priv)) {
+ dev_err(dev, "qman_oos_fq(%u) = %d\n",
+ qman_fq_fqid(fq), __errno);
+ if (_errno >= 0)
+ _errno = __errno;
+ }
+ }
+
+ qman_destroy_fq(fq, 0);
+ list_del(&dpa_fq->list);
+
+ return _errno;
+}
+
+int __cold __attribute__((nonnull))
+dpa_fq_free(struct device *dev, struct list_head *list)
+{
+ int _errno, __errno;
+ struct dpa_fq *dpa_fq, *tmp;
+
+ _errno = 0;
+ list_for_each_entry_safe(dpa_fq, tmp, list, list) {
+ __errno = _dpa_fq_free(dev, (struct qman_fq *)dpa_fq);
+ if (unlikely(__errno < 0) && _errno >= 0)
+ _errno = __errno;
+ }
+
+ return _errno;
+}
+EXPORT_SYMBOL(dpa_fq_free);
+
+static void
+dpaa_eth_init_tx_port(struct fm_port *port, struct dpa_fq *errq,
+ struct dpa_fq *defq,
+ struct dpa_buffer_layout_s *buf_layout)
+{
+ struct fm_port_params tx_port_param;
+
+ memset(&tx_port_param, 0, sizeof(tx_port_param));
+ dpaa_eth_init_port(tx, port, tx_port_param, errq->fqid, defq->fqid,
+ buf_layout, false);
+}
+
+static void
+dpaa_eth_init_rx_port(struct fm_port *port, struct dpa_bp *bp, size_t count,
+ struct dpa_fq *errq, struct dpa_fq *defq,
+ struct dpa_buffer_layout_s *buf_layout)
+{
+ struct fm_port_params rx_port_param;
+ int i;
+
+ memset(&rx_port_param, 0, sizeof(rx_port_param));
+ count = min(ARRAY_SIZE(rx_port_param.pool_param), count);
+ rx_port_param.num_pools = (u8)count;
+ for (i = 0; i < count; i++) {
+ if (i >= rx_port_param.num_pools)
+ break;
+ rx_port_param.pool_param[i].id = bp[i].bpid;
+ rx_port_param.pool_param[i].size = (u16)bp[i].size;
+ }
+
+ dpaa_eth_init_port(rx, port, rx_port_param, errq->fqid, defq->fqid,
+ buf_layout, false);
+}
+
+void dpaa_eth_init_ports(struct mac_device *mac_dev,
+ struct dpa_bp *bp, size_t count,
+ struct fm_port_fqs *port_fqs,
+ struct dpa_buffer_layout_s *buf_layout,
+ struct device *dev)
+{
+ struct fm_port *rxport = mac_dev->port_dev[RX];
+ struct fm_port *txport = mac_dev->port_dev[TX];
+
+ dpaa_eth_init_tx_port(txport, port_fqs->tx_errq,
+ port_fqs->tx_defq, &buf_layout[TX]);
+ dpaa_eth_init_rx_port(rxport, bp, count, port_fqs->rx_errq,
+ port_fqs->rx_defq, &buf_layout[RX]);
+}
+EXPORT_SYMBOL(dpaa_eth_init_ports);
+
+void __attribute__((nonnull))
+dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
+{
+ struct dpa_bp *_dpa_bp;
+ struct bm_buffer _bmb;
+
+ _bmb.hi = fd->addr_hi;
+ _bmb.lo = fd->addr_lo;
+
+ _dpa_bp = dpa_bpid2pool(fd->bpid);
+ DPA_ERR_ON(!_dpa_bp);
+
+ DPA_ERR_ON(fd->format == qm_fd_sg);
+
+ while (bman_release(_dpa_bp->pool, &_bmb, 1, 0))
+ cpu_relax();
+}
+EXPORT_SYMBOL(dpa_fd_release);
+
+/**
+ * Turn on HW checksum computation for this outgoing frame.
+ * If the current protocol is not something we support in this regard
+ * (or if the stack has already computed the SW checksum), we do nothing.
+ *
+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
+ * otherwise.
+ *
+ * Note that this function may modify the fd->cmd field and the skb data buffer
+ * (the Parse Results area).
+ */
+int dpa_enable_tx_csum(struct dpa_priv_s *priv,
+ struct sk_buff *skb,
+ struct qm_fd *fd,
+ char *parse_results)
+{
+ fm_prs_result *parse_result;
+ struct iphdr *iph;
+ struct ipv6hdr *ipv6h = NULL;
+ int l4_proto;
+ int ethertype = ntohs(skb->protocol);
+ int retval = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ /* Note: L3 csum seems to be already computed in sw, but we can't choose
+ * L4 alone from the FM configuration anyway.
+ */
+
+ /* Fill in some fields of the Parse Results array, so the FMan
+ * can find them as if they came from the FMan Parser.
+ */
+ parse_result = (fm_prs_result *)parse_results;
+
+ /* If we're dealing with VLAN, get the real Ethernet type */
+ if (ethertype == ETH_P_8021Q) {
+ /* We can't always assume the MAC header is set correctly
+ * by the stack, so reset to beginning of skb->data
+ */
+ skb_reset_mac_header(skb);
+ ethertype = ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
+ }
+
+ /* Fill in the relevant L3 parse result fields
+ * and read the L4 protocol type
+ */
+ switch (ethertype) {
+ case ETH_P_IP:
+ parse_result->l3r = FM_L3_PARSE_RESULT_IPV4;
+ iph = ip_hdr(skb);
+ DPA_ERR_ON(!iph);
+ l4_proto = ntohs(iph->protocol);
+ break;
+ case ETH_P_IPV6:
+ parse_result->l3r = FM_L3_PARSE_RESULT_IPV6;
+ ipv6h = ipv6_hdr(skb);
+ DPA_ERR_ON(!ipv6h);
+ l4_proto = ntohs(ipv6h->nexthdr);
+ break;
+ default:
+ /* We shouldn't even be here */
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ netdev_alert(priv->net_dev,
+ "Can't compute HW csum for L3 proto 0x%x\n",
+ ntohs(skb->protocol));
+ retval = -EIO;
+ goto return_error;
+ }
+
+ /* Fill in the relevant L4 parse result fields */
+ switch (l4_proto) {
+ case IPPROTO_UDP:
+ parse_result->l4r = FM_L4_PARSE_RESULT_UDP;
+ break;
+ case IPPROTO_TCP:
+ parse_result->l4r = FM_L4_PARSE_RESULT_TCP;
+ break;
+ default:
+ /* This can as well be a BUG() */
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ netdev_alert(priv->net_dev,
+ "Can't compute HW csum for L4 proto 0x%x\n",
+ l4_proto);
+ retval = -EIO;
+ goto return_error;
+ }
+
+ /* At index 0 is IPOffset_1 as defined in the Parse Results */
+ parse_result->ip_off[0] = (u8)skb_network_offset(skb);
+ parse_result->l4_off = (u8)skb_transport_offset(skb);
+
+ /* Enable L3 (and L4, if TCP or UDP) HW checksum. */
+ fd->cmd |= FM_FD_CMD_RPD | FM_FD_CMD_DTC;
+
+ /* On P1023 and similar platforms fd->cmd interpretation could
+ * be disabled by setting CONTEXT_A bit ICMD; currently this bit
+ * is not set so we do not need to check; in the future, if/when
+ * using context_a we need to check this bit
+ */
+
+return_error:
+ return retval;
+}
+EXPORT_SYMBOL(dpa_enable_tx_csum);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
new file mode 100644
index 0000000..96bc63e
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -0,0 +1,119 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DPAA_ETH_COMMON_H
+#define __DPAA_ETH_COMMON_H
+
+#include <linux/etherdevice.h> /* struct net_device */
+#include <soc/fsl/bman.h> /* struct bm_buffer */
+#include <linux/of_platform.h> /* struct platform_device */
+#include <linux/net_tstamp.h> /* struct hwtstamp_config */
+
+#include "dpaa_eth.h"
+#include "fsl_fman_drv.h"
+
+#define dpaa_eth_init_port(type, port, param, errq_id, defq_id, buf_layout,\
+ frag_enabled) \
+{ \
+ param.errq = errq_id; \
+ param.defq = defq_id; \
+ param.priv_data_size = buf_layout->priv_data_size; \
+ param.parse_results = buf_layout->parse_results; \
+ param.hash_results = buf_layout->hash_results; \
+ param.time_stamp = buf_layout->time_stamp; \
+ param.data_align = buf_layout->data_align; \
+ fm_set_##type##_port_params(port, ¶m); \
+}
+
+#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
+
+/* used in napi related functions */
+extern u16 qman_portal_max;
+
+int dpa_netdev_init(struct net_device *net_dev,
+ const u8 *mac_addr,
+ u16 tx_timeout);
+int __cold dpa_start(struct net_device *net_dev);
+int __cold dpa_stop(struct net_device *net_dev);
+void __cold dpa_timeout(struct net_device *net_dev);
+struct rtnl_link_stats64 * __cold
+dpa_get_stats64(struct net_device *net_dev,
+ struct rtnl_link_stats64 *stats);
+int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
+int dpa_ndo_init(struct net_device *net_dev);
+int dpa_set_features(struct net_device *dev, netdev_features_t features);
+netdev_features_t dpa_fix_features(struct net_device *dev,
+ netdev_features_t features);
+int __cold dpa_remove(struct platform_device *pdev);
+struct mac_device * __cold __must_check
+__attribute__((nonnull)) dpa_mac_dev_get(struct platform_device *pdev);
+int dpa_mac_hw_index_get(struct platform_device *pdev);
+int dpa_mac_fman_index_get(struct platform_device *pdev);
+int dpa_set_mac_address(struct net_device *net_dev, void *addr);
+void dpa_set_rx_mode(struct net_device *net_dev);
+void dpa_set_buffers_layout(struct mac_device *mac_dev,
+ struct dpa_buffer_layout_s *layout);
+int __attribute__((nonnull))
+dpa_bp_alloc(struct dpa_bp *dpa_bp);
+void __cold __attribute__((nonnull))
+dpa_bp_free(struct dpa_priv_s *priv);
+struct dpa_bp *dpa_bpid2pool(int bpid);
+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
+bool dpa_bpid2pool_use(int bpid);
+void dpa_bp_drain(struct dpa_bp *bp);
+struct dpa_fq *dpa_fq_alloc(struct device *dev,
+ const struct fqid_cell *fqids,
+ struct list_head *list,
+ enum dpa_fq_type fq_type);
+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
+ struct fm_port_fqs *port_fqs,
+ bool tx_conf_fqs_per_core,
+ enum port_type ptype);
+int dpa_get_channel(void);
+void dpa_release_channel(void);
+int dpaa_eth_add_channel(void *__arg);
+int dpaa_eth_cgr_init(struct dpa_priv_s *priv);
+void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
+ struct fm_port *tx_port);
+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable);
+int __cold __attribute__((nonnull))
+dpa_fq_free(struct device *dev, struct list_head *list);
+void dpaa_eth_init_ports(struct mac_device *mac_dev,
+ struct dpa_bp *bp, size_t count,
+ struct fm_port_fqs *port_fqs,
+ struct dpa_buffer_layout_s *buf_layout,
+ struct device *dev);
+void __attribute__((nonnull))
+dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
+int dpa_enable_tx_csum(struct dpa_priv_s *priv,
+ struct sk_buff *skb,
+ struct qm_fd *fd,
+ char *parse_results);
+#endif /* __DPAA_ETH_COMMON_H */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
new file mode 100644
index 0000000..ef3117e
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -0,0 +1,428 @@
+/* Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) \
+ KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/highmem.h>
+#include <soc/fsl/bman.h>
+
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+
+/* Convenience macros for storing/retrieving the skb back-pointers.
+ *
+ * NB: @off is an offset from a (struct sk_buff **) pointer!
+ */
+#define DPA_WRITE_SKB_PTR(skb, skbh, addr, off) \
+ { \
+ skbh = (struct sk_buff **)addr; \
+ *(skbh + (off)) = skb; \
+ }
+#define DPA_READ_SKB_PTR(skb, skbh, addr, off) \
+ { \
+ skbh = (struct sk_buff **)addr; \
+ skb = *(skbh + (off)); \
+ }
+
+static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
+{
+ struct bm_buffer bmb[8];
+ void *new_buf;
+ dma_addr_t addr;
+ u8 i;
+ struct device *dev = dpa_bp->dev;
+ struct sk_buff *skb, **skbh;
+
+ for (i = 0; i < 8; i++) {
+ /* We'll prepend the skb back-pointer; can't use the DPA
+ * priv space, because FMan will overwrite it (from offset 0)
+ * if it ends up being the second, third, etc. fragment
+ * in a S/G frame.
+ *
+ * We only need enough space to store a pointer, but allocate
+ * an entire cacheline for performance reasons.
+ */
+ new_buf = netdev_alloc_frag(SMP_CACHE_BYTES + DPA_BP_RAW_SIZE);
+ if (unlikely(!new_buf))
+ goto netdev_alloc_failed;
+ new_buf = PTR_ALIGN(new_buf + SMP_CACHE_BYTES, SMP_CACHE_BYTES);
+
+ skb = build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
+ if (unlikely(!skb)) {
+ put_page(virt_to_head_page(new_buf));
+ goto build_skb_failed;
+ }
+ DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
+
+ addr = dma_map_single(dev, new_buf,
+ dpa_bp->size, DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(dev, addr)))
+ goto dma_map_failed;
+
+ bm_buffer_set64(&bmb[i], addr);
+ }
+
+release_bufs:
+ /* Release the buffers. In case bman is busy, keep trying
+ * until successful. bman_release() is guaranteed to succeed
+ * in a reasonable amount of time
+ */
+ while (unlikely(bman_release(dpa_bp->pool, bmb, i, 0)))
+ cpu_relax();
+ return i;
+
+dma_map_failed:
+ kfree_skb(skb);
+
+build_skb_failed:
+netdev_alloc_failed:
+ net_err_ratelimited("dpa_bp_add_8_bufs() failed\n");
+ WARN_ONCE(1, "Memory allocation failure on Rx\n");
+
+ bm_buffer_set64(&bmb[i], 0);
+ /* Avoid releasing a completely null buffer; bman_release() requires
+ * at least one buffer.
+ */
+ if (likely(i))
+ goto release_bufs;
+
+ return 0;
+}
+
+/* Cold path wrapper over _dpa_bp_add_8_bufs(). */
+static void dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp, int cpu)
+{
+ int *count_ptr = per_cpu_ptr(dpa_bp->percpu_count, cpu);
+ *count_ptr += _dpa_bp_add_8_bufs(dpa_bp);
+}
+
+int dpa_bp_priv_seed(struct dpa_bp *dpa_bp)
+{
+ int i;
+
+ /* Give each CPU an allotment of "config_count" buffers */
+ for_each_possible_cpu(i) {
+ int j;
+
+ /* Although we access another CPU's counters here
+ * we do it at boot time so it is safe
+ */
+ for (j = 0; j < dpa_bp->config_count; j += 8)
+ dpa_bp_add_8_bufs(dpa_bp, i);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(dpa_bp_priv_seed);
+
+/* Add buffers/(pages) for Rx processing whenever bpool count falls below
+ * REFILL_THRESHOLD.
+ */
+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
+{
+ int count = *countptr;
+ int new_bufs;
+
+ if (unlikely(count < FSL_DPAA_ETH_REFILL_THRESHOLD)) {
+ do {
+ new_bufs = _dpa_bp_add_8_bufs(dpa_bp);
+ if (unlikely(!new_bufs)) {
+ /* Avoid looping forever if we've temporarily
+ * run out of memory. We'll try again at the
+ * next NAPI cycle.
+ */
+ break;
+ }
+ count += new_bufs;
+ } while (count < FSL_DPAA_ETH_MAX_BUF_COUNT);
+
+ *countptr = count;
+ if (unlikely(count < FSL_DPAA_ETH_MAX_BUF_COUNT))
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dpaa_eth_refill_bpools);
+
+/* Cleanup function for outgoing frame descriptors that were built on Tx path,
+ * either contiguous frames or scatter/gather ones.
+ * Skb freeing is not handled here.
+ *
+ * This function may be called on error paths in the Tx function, so guard
+ * against cases when not all fd relevant fields were filled in.
+ *
+ * Return the skb backpointer, since for S/G frames the buffer containing it
+ * gets freed here.
+ */
+struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
+ const struct qm_fd *fd)
+{
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ dma_addr_t addr = qm_fd_addr(fd);
+ struct sk_buff **skbh;
+ struct sk_buff *skb = NULL;
+ const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
+ int nr_frags;
+
+ dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, dma_dir);
+
+ /* retrieve skb back pointer */
+ DPA_READ_SKB_PTR(skb, skbh, phys_to_virt(addr), 0);
+ nr_frags = skb_shinfo(skb)->nr_frags;
+
+ return skb;
+}
+
+/* Build a linear skb around the received buffer.
+ * We are guaranteed there is enough room at the end of the data buffer to
+ * accommodate the shared info area of the skb.
+ */
+static struct sk_buff *__hot contig_fd_to_skb(const struct dpa_priv_s *priv,
+ const struct qm_fd *fd)
+{
+ struct sk_buff *skb = NULL, **skbh;
+ ssize_t fd_off = dpa_fd_offset(fd);
+ dma_addr_t addr = qm_fd_addr(fd);
+ void *vaddr;
+
+ vaddr = phys_to_virt(addr);
+ DPA_ERR_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
+
+ /* Retrieve the skb and adjust data and tail pointers, to make sure
+ * forwarded skbs will have enough space on Tx if extra headers
+ * are added.
+ */
+ DPA_READ_SKB_PTR(skb, skbh, vaddr, -1);
+
+ DPA_ERR_ON(fd_off != priv->rx_headroom);
+ skb_reserve(skb, fd_off);
+ skb_put(skb, dpa_fd_length(fd));
+
+ skb->ip_summed = CHECKSUM_NONE;
+
+ return skb;
+}
+
+void __hot _dpa_rx(struct net_device *net_dev,
+ struct qman_portal *portal,
+ const struct dpa_priv_s *priv,
+ struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid,
+ int *count_ptr)
+{
+ struct dpa_bp *dpa_bp;
+ struct sk_buff *skb;
+ dma_addr_t addr = qm_fd_addr(fd);
+ u32 fd_status = fd->status;
+ unsigned int skb_len;
+ struct rtnl_link_stats64 *percpu_stats = &percpu_priv->stats;
+
+ if (unlikely(fd_status & FM_FD_STAT_RX_ERRORS) != 0) {
+ if (netif_msg_hw(priv) && net_ratelimit())
+ netdev_warn(net_dev, "FD status = 0x%08x\n",
+ fd_status & FM_FD_STAT_RX_ERRORS);
+
+ percpu_stats->rx_errors++;
+ goto _release_frame;
+ }
+
+ dpa_bp = priv->dpa_bp;
+ DPA_ERR_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
+
+ /* prefetch the first 64 bytes of the frame */
+ dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
+ prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
+
+ /* The only FD type that we may receive is contig */
+ DPA_ERR_ON((fd->format != qm_fd_contig));
+
+ skb = contig_fd_to_skb(priv, fd);
+
+ /* Account for the contig buffer
+ * having been removed from the pool.
+ */
+ (*count_ptr)--;
+ skb->protocol = eth_type_trans(skb, net_dev);
+
+ /* IP Reassembled frames are allowed to be larger than MTU */
+ if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
+ !(fd_status & FM_FD_IPR))) {
+ percpu_stats->rx_dropped++;
+ goto drop_bad_frame;
+ }
+
+ skb_len = skb->len;
+
+ if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+ goto packet_dropped;
+
+ percpu_stats->rx_packets++;
+ percpu_stats->rx_bytes += skb_len;
+
+packet_dropped:
+ return;
+
+drop_bad_frame:
+ dev_kfree_skb(skb);
+ return;
+
+_release_frame:
+ dpa_fd_release(net_dev, fd);
+}
+
+static int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
+ struct sk_buff *skb, struct qm_fd *fd,
+ int *count_ptr, int *offset)
+{
+ struct sk_buff **skbh;
+ dma_addr_t addr;
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ struct net_device *net_dev = priv->net_dev;
+ int err;
+ enum dma_data_direction dma_dir;
+ unsigned char *buffer_start;
+
+ {
+ /* We are guaranteed to have at least tx_headroom bytes
+ * available, so just use that for offset.
+ */
+ fd->bpid = 0xff;
+ buffer_start = skb->data - priv->tx_headroom;
+ fd->offset = priv->tx_headroom;
+ dma_dir = DMA_TO_DEVICE;
+
+ DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
+ }
+
+ /* Enable L3/L4 hardware checksum computation.
+ *
+ * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
+ * need to write into the skb.
+ */
+ err = dpa_enable_tx_csum(priv, skb, fd,
+ ((char *)skbh) + DPA_TX_PRIV_DATA_SIZE);
+ if (unlikely(err < 0)) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ netdev_err(net_dev, "HW csum error: %d\n", err);
+ return err;
+ }
+
+ /* Fill in the rest of the FD fields */
+ fd->format = qm_fd_contig;
+ fd->length20 = skb->len;
+ fd->cmd |= FM_FD_CMD_FCO;
+
+ /* Map the entire buffer size that may be seen by FMan, but no more */
+ addr = dma_map_single(dpa_bp->dev, skbh,
+ skb_end_pointer(skb) - buffer_start, dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ netdev_err(net_dev, "dma_map_single() failed\n");
+ return -EINVAL;
+ }
+ fd->addr_hi = (u8)upper_32_bits(addr);
+ fd->addr_lo = lower_32_bits(addr);
+
+ return 0;
+}
+
+int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv;
+ struct qm_fd fd;
+ struct dpa_percpu_priv_s *percpu_priv;
+ struct rtnl_link_stats64 *percpu_stats;
+ const int queue_mapping = dpa_get_queue_mapping(skb);
+ int *countptr, offset = 0;
+
+ priv = netdev_priv(net_dev);
+ /* Non-migratable context, safe to use raw_cpu_ptr */
+ percpu_priv = raw_cpu_ptr(priv->percpu_priv);
+ percpu_stats = &percpu_priv->stats;
+ countptr = raw_cpu_ptr(priv->dpa_bp->percpu_count);
+
+ clear_fd(&fd);
+
+ /* Make sure we have enough headroom to accommodate private
+ * data, parse results, etc. Normally this shouldn't happen if
+ * we're here via the standard kernel stack.
+ */
+ if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
+ struct sk_buff *skb_new;
+
+ skb_new = skb_realloc_headroom(skb, priv->tx_headroom);
+ if (unlikely(!skb_new)) {
+ dev_kfree_skb(skb);
+ percpu_stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
+ dev_kfree_skb(skb);
+ skb = skb_new;
+ }
+
+ /* We're going to store the skb backpointer at the beginning
+ * of the data buffer, so we need a privately owned skb
+ */
+
+ /* Code borrowed from skb_unshare(). */
+ if (skb_cloned(skb)) {
+ struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
+
+ /* Finally, create a contig FD from this skb */
+ skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
+
+ kfree_skb(skb);
+ skb = nskb;
+ /* skb_copy() has now linearized the skbuff. */
+ }
+
+ if (unlikely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) < 0))
+ goto xmit_failed;
+
+ net_dev->trans_start = jiffies;
+ return NETDEV_TX_OK;
+
+xmit_failed:
+ if (fd.cmd & FM_FD_CMD_FCO) {
+ (*countptr)--;
+ dpa_fd_release(net_dev, &fd);
+ percpu_stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
+ _dpa_cleanup_tx_fd(priv, &fd);
+ percpu_stats->tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 03/11] dpaa_eth: add PM ops
2015-03-17 18:58 ` [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 04/11] dpaa_eth: add configurable bpool thresholds Madalin Bucur
2015-03-18 16:30 ` Kumar Gala
1 sibling, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Add suspend and resume functionality.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 109 +++++++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 9 ++
2 files changed, 118 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 96a7cee..76b05c1 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -87,6 +87,110 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
static u8 dpa_priv_common_bpid;
+#ifdef CONFIG_PM
+
+static int dpaa_suspend(struct device *dev)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ int err = 0;
+
+ net_dev = dev_get_drvdata(dev);
+
+ if (net_dev->flags & IFF_UP) {
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ if (priv->wol & DPAA_WOL_MAGIC) {
+ err = priv->mac_dev->set_wol(
+ priv->mac_dev->get_mac_handle(mac_dev), true);
+ if (err) {
+ netdev_err(net_dev, "set_wol() = %d\n", err);
+ goto set_wol_failed;
+ }
+ }
+
+ err = fm_port_suspend(mac_dev->port_dev[RX]);
+ if (err) {
+ netdev_err(net_dev, "fm_port_suspend(RX) = %d\n", err);
+ goto rx_port_suspend_failed;
+ }
+
+ err = fm_port_suspend(mac_dev->port_dev[TX]);
+ if (err) {
+ netdev_err(net_dev, "fm_port_suspend(TX) = %d\n", err);
+ goto tx_port_suspend_failed;
+ }
+ }
+
+ return 0;
+
+tx_port_suspend_failed:
+ fm_port_resume(mac_dev->port_dev[RX]);
+rx_port_suspend_failed:
+ if (priv->wol & DPAA_WOL_MAGIC) {
+ priv->mac_dev->set_wol(priv->mac_dev->get_mac_handle(mac_dev),
+ false);
+ }
+set_wol_failed:
+ return err;
+}
+
+static int dpaa_resume(struct device *dev)
+{
+ struct net_device *net_dev;
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ int err = 0;
+
+ net_dev = dev_get_drvdata(dev);
+
+ if (net_dev->flags & IFF_UP) {
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ err = fm_port_resume(mac_dev->port_dev[TX]);
+ if (err) {
+ netdev_err(net_dev, "fm_port_resume(TX) = %d\n", err);
+ goto resume_failed;
+ }
+
+ err = fm_port_resume(mac_dev->port_dev[RX]);
+ if (err) {
+ netdev_err(net_dev, "fm_port_resume(RX) = %d\n", err);
+ goto resume_failed;
+ }
+
+ if (priv->wol & DPAA_WOL_MAGIC) {
+ err = priv->mac_dev->set_wol(
+ priv->mac_dev->get_mac_handle(mac_dev), false);
+ if (err) {
+ netdev_err(net_dev, "set_wol() = %d\n", err);
+ goto resume_failed;
+ }
+ }
+ }
+
+ return 0;
+
+resume_failed:
+ return err;
+}
+
+static const struct dev_pm_ops dpaa_pm_ops = {
+ .suspend = dpaa_suspend,
+ .resume = dpaa_resume,
+};
+
+#define DPAA_PM_OPS (&dpaa_pm_ops)
+
+#else /* CONFIG_PM */
+
+#define DPAA_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
static void _dpa_rx_error(struct net_device *net_dev,
const struct dpa_priv_s *priv,
struct dpa_percpu_priv_s *percpu_priv,
@@ -744,6 +848,10 @@ dpaa_eth_priv_probe(struct platform_device *pdev)
if (err < 0)
goto netdev_init_failed;
+#ifdef CONFIG_PM
+ device_set_wakeup_capable(dev, true);
+#endif
+
pr_info("Probed interface %s\n", net_dev->name);
return 0;
@@ -789,6 +897,7 @@ static struct platform_driver dpa_driver = {
.driver = {
.name = KBUILD_MODNAME,
.owner = THIS_MODULE,
+ .pm = DPAA_PM_OPS,
},
.id_table = dpa_devtype,
.probe = dpaa_eth_priv_probe,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 793491f..9b70c5a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -128,6 +128,11 @@ struct dpa_buffer_layout_s {
#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
+#ifdef CONFIG_PM
+/* Magic Packet wakeup */
+#define DPAA_WOL_MAGIC 0x00000001
+#endif
+
/* More detailed FQ types - used for fine-grained WQ assignments */
enum dpa_fq_type {
FQ_TYPE_RX_DEFAULT = 1, /* Rx Default FQs */
@@ -244,6 +249,10 @@ struct dpa_priv_s {
struct dpa_buffer_layout_s *buf_layout;
u16 rx_headroom;
+
+#ifdef CONFIG_PM
+ u32 wol;
+#endif
};
struct fm_port_fqs {
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 04/11] dpaa_eth: add configurable bpool thresholds
2015-03-17 18:58 ` [PATCH RFC 03/11] dpaa_eth: add PM ops Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 05/11] dpaa_eth: add support for S/G frames Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Allow the user to tweak the refill threshold and the total number
of buffers in the buffer pool. The provided values are for one CPU.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Kconfig | 20 ++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 3 ---
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 6 +++---
4 files changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 7ef703c..9db7d25 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -11,6 +11,26 @@ menuconfig FSL_DPAA_ETH
if FSL_DPAA_ETH
+config FSL_DPAA_ETH_MAX_BUF_COUNT
+ int "Maximum nuber of buffers in private bpool"
+ depends on FSL_DPAA_ETH
+ range 64 2048
+ default "128"
+ ---help---
+ The maximum number of buffers to be by default allocated in the DPAA-Ethernet private port's
+ buffer pool. One needn't normally modify this, as it has probably been tuned for performance
+ already. This cannot be lower than DPAA_ETH_REFILL_THRESHOLD.
+
+config FSL_DPAA_ETH_REFILL_THRESHOLD
+ int "Private bpool refill threshold"
+ depends on FSL_DPAA_ETH
+ range 32 FSL_DPAA_ETH_MAX_BUF_COUNT
+ default "80"
+ ---help---
+ The DPAA-Ethernet driver will start replenishing buffer pools whose count
+ falls below this threshold. This must be related to DPAA_ETH_MAX_BUF_COUNT. One needn't normally
+ modify this value unless one has very specific performance reasons.
+
config FSL_DPAA_CS_THRESHOLD_1G
hex "Egress congestion threshold on 1G ports"
depends on FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 76b05c1..efa9711 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -591,7 +591,7 @@ dpa_priv_bp_probe(struct device *dev)
}
dpa_bp->percpu_count = devm_alloc_percpu(dev, *dpa_bp->percpu_count);
- dpa_bp->target_count = FSL_DPAA_ETH_MAX_BUF_COUNT;
+ dpa_bp->target_count = CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT;
dpa_bp->seed_cb = dpa_bp_priv_seed;
dpa_bp->free_buf_cb = _dpa_bp_free_pf;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 9b70c5a..19e9068 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -125,9 +125,6 @@ struct dpa_buffer_layout_s {
#define DPAA_ETH_RX_QUEUES 128
-#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
-#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
-
#ifdef CONFIG_PM
/* Magic Packet wakeup */
#define DPAA_WOL_MAGIC 0x00000001
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
index ef3117e..1b3dc28 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -153,7 +153,7 @@ int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
int count = *countptr;
int new_bufs;
- if (unlikely(count < FSL_DPAA_ETH_REFILL_THRESHOLD)) {
+ if (unlikely(count < CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD)) {
do {
new_bufs = _dpa_bp_add_8_bufs(dpa_bp);
if (unlikely(!new_bufs)) {
@@ -164,10 +164,10 @@ int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
break;
}
count += new_bufs;
- } while (count < FSL_DPAA_ETH_MAX_BUF_COUNT);
+ } while (count < CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT);
*countptr = count;
- if (unlikely(count < FSL_DPAA_ETH_MAX_BUF_COUNT))
+ if (unlikely(count < CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT))
return -ENOMEM;
}
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 05/11] dpaa_eth: add support for S/G frames
2015-03-17 18:58 ` [PATCH RFC 04/11] dpaa_eth: add configurable bpool thresholds Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 06/11] dpaa_eth: add driver's Tx queue selection mechanism Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Add support for Scater/Gather (S/G) frames. The FMan can place
the frame content into multiple buffers and provide a S/G Table
(SGT) into one first buffer with references to the others.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 34 +-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 356 +++++++++++++++++++--
4 files changed, 367 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index efa9711..ebd50f3 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -574,6 +574,12 @@ static int dpa_private_netdev_init(struct net_device *net_dev)
net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_LLTX);
+ /* Advertise S/G and HIGHDMA support for private interfaces */
+ net_dev->hw_features |= NETIF_F_SG | NETIF_F_HIGHDMA;
+ /* Recent kernels enable GSO automatically, if
+ * we declare NETIF_F_SG. For conformity, we'll
+ * still declare GSO explicitly.
+ */
net_dev->features |= NETIF_F_GSO;
return dpa_netdev_init(net_dev, mac_addr, tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 7094a45..1fdb35d 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -1162,9 +1162,38 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
}
EXPORT_SYMBOL(dpaa_eth_init_ports);
+void dpa_release_sgt(struct qm_sg_entry *sgt)
+{
+ struct dpa_bp *dpa_bp;
+ struct bm_buffer bmb[DPA_BUFF_RELEASE_MAX];
+ u8 i = 0, j;
+
+ do {
+ dpa_bp = dpa_bpid2pool(sgt[i].bpid);
+ DPA_ERR_ON(!dpa_bp);
+
+ j = 0;
+ do {
+ DPA_ERR_ON(sgt[i].extension);
+
+ bmb[j].hi = sgt[i].addr_hi;
+ bmb[j].lo = sgt[i].addr_lo;
+
+ j++; i++;
+ } while (j < ARRAY_SIZE(bmb) &&
+ !sgt[i - 1].final &&
+ sgt[i - 1].bpid == sgt[i].bpid);
+
+ while (bman_release(dpa_bp->pool, bmb, j, 0))
+ cpu_relax();
+ } while (!sgt[i - 1].final);
+}
+EXPORT_SYMBOL(dpa_release_sgt);
+
void __attribute__((nonnull))
dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
{
+ struct qm_sg_entry *sgt;
struct dpa_bp *_dpa_bp;
struct bm_buffer _bmb;
@@ -1174,7 +1203,10 @@ dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
_dpa_bp = dpa_bpid2pool(fd->bpid);
DPA_ERR_ON(!_dpa_bp);
- DPA_ERR_ON(fd->format == qm_fd_sg);
+ if (fd->format == qm_fd_sg) {
+ sgt = (phys_to_virt(bm_buf_addr(&_bmb)) + dpa_fd_offset(fd));
+ dpa_release_sgt(sgt);
+ }
while (bman_release(_dpa_bp->pool, &_bmb, 1, 0))
cpu_relax();
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 96bc63e..9b1774e 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -52,6 +52,7 @@
fm_set_##type##_port_params(port, ¶m); \
}
+#define DPA_SGT_MAX_ENTRIES 16 /* maximum number of entries in SG Table */
#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
/* used in napi related functions */
@@ -110,6 +111,7 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
struct fm_port_fqs *port_fqs,
struct dpa_buffer_layout_s *buf_layout,
struct device *dev);
+void dpa_release_sgt(struct qm_sg_entry *sgt);
void __attribute__((nonnull))
dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
int dpa_enable_tx_csum(struct dpa_priv_s *priv,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
index 1b3dc28..410effd 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -54,6 +54,31 @@
skb = *(skbh + (off)); \
}
+/* DMA map and add a page frag back into the bpool.
+ * @vaddr fragment must have been allocated with netdev_alloc_frag(),
+ * specifically for fitting into @dpa_bp.
+ */
+static void dpa_bp_recycle_frag(struct dpa_bp *dpa_bp, unsigned long vaddr,
+ int *count_ptr)
+{
+ struct bm_buffer bmb;
+ dma_addr_t addr;
+
+ addr = dma_map_single(dpa_bp->dev, (void *)vaddr, dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ return;
+ }
+
+ bm_buffer_set64(&bmb, addr);
+
+ while (bman_release(dpa_bp->pool, &bmb, 1, 0))
+ cpu_relax();
+
+ (*count_ptr)++;
+}
+
static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
{
struct bm_buffer bmb[8];
@@ -188,6 +213,8 @@ EXPORT_SYMBOL(dpaa_eth_refill_bpools);
struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
const struct qm_fd *fd)
{
+ const struct qm_sg_entry *sgt;
+ int i;
struct dpa_bp *dpa_bp = priv->dpa_bp;
dma_addr_t addr = qm_fd_addr(fd);
struct sk_buff **skbh;
@@ -201,6 +228,28 @@ struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
DPA_READ_SKB_PTR(skb, skbh, phys_to_virt(addr), 0);
nr_frags = skb_shinfo(skb)->nr_frags;
+ if (fd->format == qm_fd_sg) {
+ /* The sgt buffer has been allocated with netdev_alloc_frag(),
+ * it's from lowmem.
+ */
+ sgt = phys_to_virt(addr + dpa_fd_offset(fd));
+
+ /* sgt[0] is from lowmem, was dma_map_single()-ed */
+ dma_unmap_single(dpa_bp->dev, (dma_addr_t)sgt[0].addr,
+ sgt[0].length, dma_dir);
+
+ /* remaining pages were mapped with dma_map_page() */
+ for (i = 1; i < nr_frags; i++) {
+ DPA_ERR_ON(sgt[i].extension);
+
+ dma_unmap_page(dpa_bp->dev, (dma_addr_t)sgt[i].addr,
+ sgt[i].length, dma_dir);
+ }
+
+ /* Free the page frag that we allocated on Tx */
+ put_page(virt_to_head_page(sgt));
+ }
+
return skb;
}
@@ -234,6 +283,107 @@ static struct sk_buff *__hot contig_fd_to_skb(const struct dpa_priv_s *priv,
return skb;
}
+/* Build an skb with the data of the first S/G entry in the linear portion and
+ * the rest of the frame as skb fragments.
+ *
+ * The page fragment holding the S/G Table is recycled here.
+ */
+static struct sk_buff *__hot sg_fd_to_skb(const struct dpa_priv_s *priv,
+ const struct qm_fd *fd,
+ int *count_ptr)
+{
+ const struct qm_sg_entry *sgt;
+ dma_addr_t addr = qm_fd_addr(fd);
+ ssize_t fd_off = dpa_fd_offset(fd);
+ dma_addr_t sg_addr;
+ void *vaddr, *sg_vaddr;
+ struct dpa_bp *dpa_bp;
+ struct page *page, *head_page;
+ int frag_offset, frag_len;
+ int page_offset;
+ int i;
+ struct sk_buff *skb = NULL, *skb_tmp, **skbh;
+
+ vaddr = phys_to_virt(addr);
+ DPA_ERR_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
+
+ dpa_bp = priv->dpa_bp;
+ /* Iterate through the SGT entries and add data buffers to the skb */
+ sgt = vaddr + fd_off;
+ for (i = 0; i < DPA_SGT_MAX_ENTRIES; i++) {
+ /* Extension bit is not supported */
+ DPA_ERR_ON(sgt[i].extension);
+
+ /* We use a single global Rx pool */
+ DPA_ERR_ON(dpa_bp != dpa_bpid2pool(sgt[i].bpid));
+
+ sg_addr = qm_sg_addr(&sgt[i]);
+ sg_vaddr = phys_to_virt(sg_addr);
+ DPA_ERR_ON(!IS_ALIGNED((unsigned long)sg_vaddr,
+ SMP_CACHE_BYTES));
+
+ dma_unmap_single(dpa_bp->dev, sg_addr, dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+ if (i == 0) {
+ DPA_READ_SKB_PTR(skb, skbh, sg_vaddr, -1);
+ DPA_ERR_ON(skb->head != sg_vaddr);
+
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Make sure forwarded skbs will have enough space
+ * on Tx, if extra headers are added.
+ */
+ DPA_ERR_ON(fd_off != priv->rx_headroom);
+ skb_reserve(skb, fd_off);
+ skb_put(skb, sgt[i].length);
+ } else {
+ /* Not the first S/G entry; all data from buffer will
+ * be added in an skb fragment; fragment index is offset
+ * by one since first S/G entry was incorporated in the
+ * linear part of the skb.
+ *
+ * Caution: 'page' may be a tail page.
+ */
+ DPA_READ_SKB_PTR(skb_tmp, skbh, sg_vaddr, -1);
+ page = virt_to_page(sg_vaddr);
+ head_page = virt_to_head_page(sg_vaddr);
+
+ /* Free (only) the skbuff shell because its data buffer
+ * is already a frag in the main skb.
+ */
+ get_page(head_page);
+ dev_kfree_skb(skb_tmp);
+
+ /* Compute offset in (possibly tail) page */
+ page_offset = ((unsigned long)sg_vaddr &
+ (PAGE_SIZE - 1)) +
+ (page_address(page) - page_address(head_page));
+ /* page_offset only refers to the beginning of sgt[i];
+ * but the buffer itself may have an internal offset.
+ */
+ frag_offset = sgt[i].offset + page_offset;
+ frag_len = sgt[i].length;
+ /* skb_add_rx_frag() does no checking on the page; if
+ * we pass it a tail page, we'll end up with
+ * bad page accounting and eventually with segafults.
+ */
+ skb_add_rx_frag(skb, i - 1, head_page, frag_offset,
+ frag_len, dpa_bp->size);
+ }
+ /* Update the pool count for the current {cpu x bpool} */
+ (*count_ptr)--;
+
+ if (sgt[i].final)
+ break;
+ }
+ WARN_ONCE(i == DPA_SGT_MAX_ENTRIES, "No final bit on SGT\n");
+
+ /* recycle the SGT fragment */
+ DPA_ERR_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
+ dpa_bp_recycle_frag(dpa_bp, (unsigned long)vaddr, count_ptr);
+ return skb;
+}
+
void __hot _dpa_rx(struct net_device *net_dev,
struct qman_portal *portal,
const struct dpa_priv_s *priv,
@@ -261,17 +411,20 @@ void __hot _dpa_rx(struct net_device *net_dev,
dpa_bp = priv->dpa_bp;
DPA_ERR_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
- /* prefetch the first 64 bytes of the frame */
+ /* prefetch the first 64 bytes of the frame or the SGT start */
dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
- /* The only FD type that we may receive is contig */
- DPA_ERR_ON((fd->format != qm_fd_contig));
+ /* The only FD types that we may receive are contig and S/G */
+ DPA_ERR_ON((fd->format != qm_fd_contig) && (fd->format != qm_fd_sg));
- skb = contig_fd_to_skb(priv, fd);
+ if (likely(fd->format == qm_fd_contig))
+ skb = contig_fd_to_skb(priv, fd);
+ else
+ skb = sg_fd_to_skb(priv, fd, count_ptr);
- /* Account for the contig buffer
- * having been removed from the pool.
+ /* Account for either the contig buffer or the SGT buffer (depending on
+ * which case we were in) having been removed from the pool.
*/
(*count_ptr)--;
skb->protocol = eth_type_trans(skb, net_dev);
@@ -358,13 +511,132 @@ static int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
return 0;
}
+static int __hot skb_to_sg_fd(struct dpa_priv_s *priv,
+ struct sk_buff *skb, struct qm_fd *fd)
+{
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ dma_addr_t addr;
+ struct sk_buff **skbh;
+ struct net_device *net_dev = priv->net_dev;
+ int err;
+
+ struct qm_sg_entry *sgt;
+ void *sgt_buf;
+ void *buffer_start;
+ skb_frag_t *frag;
+ int i, j;
+ const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
+ const int nr_frags = skb_shinfo(skb)->nr_frags;
+
+ fd->format = qm_fd_sg;
+
+ /* get a page frag to store the SGTable */
+ sgt_buf = netdev_alloc_frag(priv->tx_headroom +
+ sizeof(struct qm_sg_entry) * (1 + nr_frags));
+ if (unlikely(!sgt_buf)) {
+ dev_err(dpa_bp->dev, "netdev_alloc_frag() failed\n");
+ return -ENOMEM;
+ }
+
+ /* Enable L3/L4 hardware checksum computation.
+ *
+ * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
+ * need to write into the skb.
+ */
+ err = dpa_enable_tx_csum(priv, skb, fd,
+ sgt_buf + DPA_TX_PRIV_DATA_SIZE);
+ if (unlikely(err < 0)) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ netdev_err(net_dev, "HW csum error: %d\n", err);
+ goto csum_failed;
+ }
+
+ sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
+ sgt[0].bpid = 0xff;
+ sgt[0].offset = 0;
+ sgt[0].length = skb_headlen(skb);
+ sgt[0].extension = 0;
+ sgt[0].final = 0;
+ addr = dma_map_single(dpa_bp->dev, skb->data, sgt[0].length, dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sg0_map_failed;
+ }
+ sgt[0].addr_hi = (u8)upper_32_bits(addr);
+ sgt[0].addr_lo = lower_32_bits(addr);
+
+ /* populate the rest of SGT entries */
+ for (i = 1; i <= nr_frags; i++) {
+ frag = &skb_shinfo(skb)->frags[i - 1];
+ sgt[i].bpid = 0xff;
+ sgt[i].offset = 0;
+ sgt[i].length = frag->size;
+ sgt[i].extension = 0;
+ sgt[i].final = 0;
+
+ DPA_ERR_ON(!skb_frag_page(frag));
+ addr = skb_frag_dma_map(dpa_bp->dev, frag, 0, sgt[i].length,
+ dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sg_map_failed;
+ }
+
+ /* keep the offset in the address */
+ sgt[i].addr_hi = (u8)upper_32_bits(addr);
+ sgt[i].addr_lo = lower_32_bits(addr);
+ }
+ sgt[i - 1].final = 1;
+
+ fd->length20 = skb->len;
+ fd->offset = priv->tx_headroom;
+
+ /* DMA map the SGT page */
+ buffer_start = (void *)sgt - dpa_fd_offset(fd);
+ /* Can't write at "negative" offset in buffer_start, because this skb
+ * may not have been allocated by us.
+ */
+ DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
+
+ addr = dma_map_single(dpa_bp->dev, buffer_start,
+ skb_end_pointer(skb) -
+ (unsigned char *)buffer_start, dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sgt_map_failed;
+ }
+
+ fd->bpid = 0xff;
+ fd->cmd |= FM_FD_CMD_FCO;
+ fd->addr_hi = (u8)upper_32_bits(addr);
+ fd->addr_lo = lower_32_bits(addr);
+
+ return 0;
+
+sgt_map_failed:
+sg_map_failed:
+ for (j = 0; j < i; j++)
+ dma_unmap_page(dpa_bp->dev, qm_sg_addr(&sgt[j]),
+ sgt[j].length, dma_dir);
+sg0_map_failed:
+csum_failed:
+ put_page(virt_to_head_page(sgt_buf));
+
+ return err;
+}
+
int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
{
struct dpa_priv_s *priv;
struct qm_fd fd;
struct dpa_percpu_priv_s *percpu_priv;
struct rtnl_link_stats64 *percpu_stats;
+ int err = 0;
const int queue_mapping = dpa_get_queue_mapping(skb);
+ const bool nonlinear = skb_is_nonlinear(skb);
int *countptr, offset = 0;
priv = netdev_priv(net_dev);
@@ -375,38 +647,60 @@ int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
clear_fd(&fd);
- /* Make sure we have enough headroom to accommodate private
- * data, parse results, etc. Normally this shouldn't happen if
- * we're here via the standard kernel stack.
+ /* MAX_SKB_FRAGS is larger than our DPA_SGT_MAX_ENTRIES; make sure
+ * we don't feed FMan with more fragments than it supports.
+ * Btw, we're using the first sgt entry to store the linear part of
+ * the skb, so we're one extra frag short.
*/
- if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
- struct sk_buff *skb_new;
-
- skb_new = skb_realloc_headroom(skb, priv->tx_headroom);
- if (unlikely(!skb_new)) {
+ if (nonlinear &&
+ likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
+ /* Just create a S/G fd based on the skb */
+ err = skb_to_sg_fd(priv, skb, &fd);
+ } else {
+ /* Make sure we have enough headroom to accommodate private
+ * data, parse results, etc. Normally this shouldn't happen if
+ * we're here via the standard kernel stack.
+ */
+ if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
+ struct sk_buff *skb_new;
+
+ skb_new = skb_realloc_headroom(skb, priv->tx_headroom);
+ if (unlikely(!skb_new)) {
+ dev_kfree_skb(skb);
+ percpu_stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
dev_kfree_skb(skb);
- percpu_stats->tx_errors++;
- return NETDEV_TX_OK;
+ skb = skb_new;
}
- dev_kfree_skb(skb);
- skb = skb_new;
- }
- /* We're going to store the skb backpointer at the beginning
- * of the data buffer, so we need a privately owned skb
- */
+ /* We're going to store the skb backpointer at the beginning
+ * of the data buffer, so we need a privately owned skb
+ */
- /* Code borrowed from skb_unshare(). */
- if (skb_cloned(skb)) {
- struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
+ /* Code borrowed from skb_unshare(). */
+ if (skb_cloned(skb)) {
+ struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
+
+ kfree_skb(skb);
+ skb = nskb;
+ /* skb_copy() has now linearized the skbuff. */
+ } else if (unlikely(nonlinear)) {
+ /* We are here because the egress skb contains
+ * more fragments than we support. In this case,
+ * we have no choice but to linearize it ourselves.
+ */
+ err = __skb_linearize(skb);
+ }
+ if (unlikely(!skb || err < 0))
+ /* Common out-of-memory error path */
+ goto enomem;
/* Finally, create a contig FD from this skb */
- skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
-
- kfree_skb(skb);
- skb = nskb;
- /* skb_copy() has now linearized the skbuff. */
+ err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
}
+ if (unlikely(err < 0))
+ goto skb_to_fd_failed;
if (unlikely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) < 0))
goto xmit_failed;
@@ -422,6 +716,8 @@ xmit_failed:
return NETDEV_TX_OK;
}
_dpa_cleanup_tx_fd(priv, &fd);
+skb_to_fd_failed:
+enomem:
percpu_stats->tx_errors++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 06/11] dpaa_eth: add driver's Tx queue selection mechanism
2015-03-17 18:58 ` [PATCH RFC 05/11] dpaa_eth: add support for S/G frames Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 07/11] dpaa_eth: add ethtool functionality Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Allow the selection of the transmission queue based on the CPU id.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Kconfig | 11 +++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 3 +++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 6 ++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c | 9 +++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h | 4 ++++
5 files changed, 33 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 9db7d25..a124639 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -11,6 +11,17 @@ menuconfig FSL_DPAA_ETH
if FSL_DPAA_ETH
+config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+ bool "Use driver's Tx queue selection mechanism"
+ default y
+ depends on FSL_DPAA_ETH
+ ---help---
+ The DPAA-Ethernet driver defines a ndo_select_queue() callback for optimal selection
+ of the egress FQ. That will override the XPS support for this netdevice.
+ If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping,
+ or simply don't want to use the driver's ndo_select_queue() callback, then unselect this
+ and use the standard XPS support instead.
+
config FSL_DPAA_ETH_MAX_BUF_COUNT
int "Maximum nuber of buffers in private bpool"
depends on FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index ebd50f3..63d7e90 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -498,6 +498,9 @@ static const struct net_device_ops dpa_private_ops = {
.ndo_get_stats64 = dpa_get_stats64,
.ndo_set_mac_address = dpa_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+ .ndo_select_queue = dpa_select_queue,
+#endif
.ndo_change_mtu = dpa_change_mtu,
.ndo_set_rx_mode = dpa_set_rx_mode,
.ndo_init = dpa_ndo_init,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 19e9068..0f216f6 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -440,9 +440,15 @@ static inline void _dpa_assign_wq(struct dpa_fq *fq)
}
}
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+/* Use in lieu of skb_get_queue_mapping() */
+#define dpa_get_queue_mapping(skb) \
+ smp_processor_id()
+#else
/* Use the queue selected by XPS */
#define dpa_get_queue_mapping(skb) \
skb_get_queue_mapping(skb)
+#endif
static inline void _dpa_bp_free_pf(void *addr)
{
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 1fdb35d..eb7a4a0 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -615,6 +615,15 @@ bool dpa_bpid2pool_use(int bpid)
return false;
}
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback)
+{
+ return dpa_get_queue_mapping(skb);
+}
+EXPORT_SYMBOL(dpa_select_queue);
+#endif
+
struct dpa_fq *dpa_fq_alloc(struct device *dev,
const struct fqid_cell *fqids,
struct list_head *list,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 9b1774e..de5b68e 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -89,6 +89,10 @@ struct dpa_bp *dpa_bpid2pool(int bpid);
void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
bool dpa_bpid2pool_use(int bpid);
void dpa_bp_drain(struct dpa_bp *bp);
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback);
+#endif
struct dpa_fq *dpa_fq_alloc(struct device *dev,
const struct fqid_cell *fqids,
struct list_head *list,
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 07/11] dpaa_eth: add ethtool functionality
2015-03-17 18:58 ` [PATCH RFC 06/11] dpaa_eth: add driver's Tx queue selection mechanism Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 08/11] dpaa_eth: add sysfs exports Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Add support for basic ethtool operations.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 3 +
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 301 +++++++++++++++++++++
4 files changed, 307 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index bdeb04e..fe9ba65 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -11,4 +11,4 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index eb7a4a0..acefc2b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -81,6 +81,8 @@ int dpa_netdev_init(struct net_device *net_dev,
memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
+ net_dev->ethtool_ops = &dpa_ethtool_ops;
+
net_dev->needed_headroom = priv->tx_headroom;
net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index de5b68e..53da367 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -58,6 +58,9 @@
/* used in napi related functions */
extern u16 qman_portal_max;
+/* from dpa_ethtool.c */
+extern const struct ethtool_ops dpa_ethtool_ops;
+
int dpa_netdev_init(struct net_device *net_dev,
const u8 *mac_addr,
u16 tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
new file mode 100644
index 0000000..cf3ce96
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -0,0 +1,301 @@
+/* Copyright 2008-2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) \
+ KBUILD_MODNAME ": " fmt
+
+#include <linux/string.h>
+
+#include "dpaa_eth.h"
+#include "mac.h" /* struct mac_device */
+#include "dpaa_eth_common.h"
+
+static int __cold dpa_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int _errno;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (unlikely(!priv->mac_dev->phy_dev)) {
+ netdev_dbg(net_dev, "phy device not initialized\n");
+ return 0;
+ }
+
+ _errno = phy_ethtool_gset(priv->mac_dev->phy_dev, et_cmd);
+ if (unlikely(_errno < 0))
+ netdev_err(net_dev, "phy_ethtool_gset() = %d\n", _errno);
+
+ return _errno;
+}
+
+static int __cold dpa_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int _errno;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (unlikely(!priv->mac_dev->phy_dev)) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ _errno = phy_ethtool_sset(priv->mac_dev->phy_dev, et_cmd);
+ if (unlikely(_errno < 0))
+ netdev_err(net_dev, "phy_ethtool_sset() = %d\n", _errno);
+
+ return _errno;
+}
+
+static void __cold dpa_get_drvinfo(struct net_device *net_dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ int _errno;
+
+ strncpy(drvinfo->driver, KBUILD_MODNAME,
+ sizeof(drvinfo->driver) - 1)[sizeof(drvinfo->driver) - 1] = 0;
+ strncpy(drvinfo->version, VERSION,
+ sizeof(drvinfo->driver) - 1)[sizeof(drvinfo->version) - 1] = 0;
+ _errno = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+ "%X", 0);
+
+ if (unlikely(_errno >= sizeof(drvinfo->fw_version))) {
+ /* Truncated output */
+ netdev_notice(net_dev, "snprintf() = %d\n", _errno);
+ } else if (unlikely(_errno < 0)) {
+ netdev_warn(net_dev, "snprintf() = %d\n", _errno);
+ memset(drvinfo->fw_version, 0, sizeof(drvinfo->fw_version));
+ }
+ strncpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
+ sizeof(drvinfo->bus_info) - 1)[sizeof(drvinfo->bus_info) - 1] =
+ 0;
+}
+
+static u32 __cold dpa_get_msglevel(struct net_device *net_dev)
+{
+ return ((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable;
+}
+
+static void __cold dpa_set_msglevel(struct net_device *net_dev,
+ u32 msg_enable)
+{
+ ((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable = msg_enable;
+}
+
+static int __cold dpa_nway_reset(struct net_device *net_dev)
+{
+ int _errno;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (unlikely(!priv->mac_dev->phy_dev)) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ _errno = 0;
+ if (priv->mac_dev->phy_dev->autoneg) {
+ _errno = phy_start_aneg(priv->mac_dev->phy_dev);
+ if (unlikely(_errno < 0))
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ _errno);
+ }
+
+ return _errno;
+}
+
+static void __cold dpa_get_ringparam(struct net_device *net_dev,
+ struct ethtool_ringparam *et_ringparam)
+{
+ et_ringparam->rx_max_pending = 0;
+ et_ringparam->rx_mini_max_pending = 0;
+ et_ringparam->rx_jumbo_max_pending = 0;
+ et_ringparam->tx_max_pending = 0;
+
+ et_ringparam->rx_pending = 0;
+ et_ringparam->rx_mini_pending = 0;
+ et_ringparam->rx_jumbo_pending = 0;
+ et_ringparam->tx_pending = 0;
+}
+
+static void __cold dpa_get_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (unlikely(!phy_dev)) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return;
+ }
+
+ epause->autoneg = mac_dev->autoneg_pause;
+ epause->rx_pause = mac_dev->rx_pause_active;
+ epause->tx_pause = mac_dev->tx_pause_active;
+}
+
+static int __cold dpa_set_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+ int _errno;
+ u32 newadv, oldadv;
+ bool rx_pause, tx_pause;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (unlikely(!phy_dev)) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ if (!(phy_dev->supported & SUPPORTED_Pause) ||
+ (!(phy_dev->supported & SUPPORTED_Asym_Pause) &&
+ (epause->rx_pause != epause->tx_pause)))
+ return -EINVAL;
+
+ /* The MAC should know how to handle PAUSE frame autonegotiation before
+ * adjust_link is triggered by a forced renegotiation of sym/asym PAUSE
+ * settings.
+ */
+ mac_dev->autoneg_pause = !!epause->autoneg;
+ mac_dev->rx_pause_req = !!epause->rx_pause;
+ mac_dev->tx_pause_req = !!epause->tx_pause;
+
+ /* Determine the sym/asym advertised PAUSE capabilities from the desired
+ * rx/tx pause settings.
+ */
+ newadv = 0;
+ if (epause->rx_pause)
+ newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+ if (epause->tx_pause)
+ newadv |= ADVERTISED_Asym_Pause;
+
+ oldadv = phy_dev->advertising &
+ (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+ /* If there are differences between the old and the new advertised
+ * values, restart PHY autonegotiation and advertise the new values.
+ */
+ if (oldadv != newadv) {
+ phy_dev->advertising &= ~(ADVERTISED_Pause
+ | ADVERTISED_Asym_Pause);
+ phy_dev->advertising |= newadv;
+ if (phy_dev->autoneg) {
+ _errno = phy_start_aneg(phy_dev);
+ if (unlikely(_errno < 0))
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ _errno);
+ }
+ }
+
+ get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
+ _errno = set_mac_active_pause(mac_dev, rx_pause, tx_pause);
+ if (unlikely(_errno < 0))
+ netdev_err(net_dev, "set_mac_active_pause() = %d\n", _errno);
+
+ return _errno;
+}
+
+#ifdef CONFIG_PM
+static void dpa_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ if (!priv->wol || !device_can_wakeup(net_dev->dev.parent))
+ return;
+
+ if (priv->wol & DPAA_WOL_MAGIC) {
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = WAKE_MAGIC;
+ }
+}
+
+static int dpa_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ if (unlikely(!priv->mac_dev->phy_dev)) {
+ netdev_dbg(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ if (!device_can_wakeup(net_dev->dev.parent) ||
+ (wol->wolopts & ~WAKE_MAGIC))
+ return -EOPNOTSUPP;
+
+ priv->wol = 0;
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ priv->wol = DPAA_WOL_MAGIC;
+ device_set_wakeup_enable(net_dev->dev.parent, 1);
+ } else {
+ device_set_wakeup_enable(net_dev->dev.parent, 0);
+ }
+
+ return 0;
+}
+#endif
+
+const struct ethtool_ops dpa_ethtool_ops = {
+ .get_settings = dpa_get_settings,
+ .set_settings = dpa_set_settings,
+ .get_drvinfo = dpa_get_drvinfo,
+ .get_msglevel = dpa_get_msglevel,
+ .set_msglevel = dpa_set_msglevel,
+ .nway_reset = dpa_nway_reset,
+ .get_ringparam = dpa_get_ringparam,
+ .get_pauseparam = dpa_get_pauseparam,
+ .set_pauseparam = dpa_set_pauseparam,
+ .self_test = NULL,
+ .get_ethtool_stats = NULL,
+ .get_link = ethtool_op_get_link,
+#ifdef CONFIG_PM
+ .get_wol = dpa_get_wol,
+ .set_wol = dpa_set_wol,
+#endif
+};
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 08/11] dpaa_eth: add sysfs exports
2015-03-17 18:58 ` [PATCH RFC 07/11] dpaa_eth: add ethtool functionality Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 09/11] dpaa_eth: add debugfs counters Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Export Frame Queue and Buffer Pool IDs through sysfs.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 168 +++++++++++++++++++++
5 files changed, 175 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index fe9ba65..53e5dcc 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -11,4 +11,4 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 63d7e90..22c2e8b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -857,6 +857,8 @@ dpaa_eth_priv_probe(struct platform_device *pdev)
if (err < 0)
goto netdev_init_failed;
+ dpaa_eth_sysfs_init(&net_dev->dev);
+
#ifdef CONFIG_PM
device_set_wakeup_capable(dev, true);
#endif
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 0f216f6..08cda76 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -353,6 +353,8 @@ static inline u16 dpa_get_headroom(struct dpa_buffer_layout_s *bl)
return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
}
+void dpaa_eth_sysfs_remove(struct device *dev);
+void dpaa_eth_sysfs_init(struct device *dev);
void dpa_private_napi_del(struct net_device *net_dev);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index acefc2b..7921b64 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -294,6 +294,8 @@ int __cold dpa_remove(struct platform_device *pdev)
priv = netdev_priv(net_dev);
+ dpaa_eth_sysfs_remove(dev);
+
dev_set_drvdata(dev, NULL);
unregister_netdev(net_dev);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
new file mode 100644
index 0000000..c2b59b9
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
@@ -0,0 +1,168 @@
+/* Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/of_net.h>
+#include "dpaa_eth.h"
+#include "mac.h" /* struct mac_device */
+
+static ssize_t dpaa_eth_show_addr(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ struct mac_device *mac_dev = priv->mac_dev;
+
+ if (mac_dev)
+ return sprintf(buf, "%llx",
+ (unsigned long long)mac_dev->res->start);
+ else
+ return sprintf(buf, "none");
+}
+
+static ssize_t dpaa_eth_show_fqids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ ssize_t bytes = 0;
+ int i = 0;
+ char *str;
+ struct dpa_fq *fq;
+ struct dpa_fq *tmp;
+ struct dpa_fq *prev = NULL;
+ u32 first_fqid = 0;
+ u32 last_fqid = 0;
+ char *prevstr = NULL;
+
+ list_for_each_entry_safe(fq, tmp, &priv->dpa_fq_list, list) {
+ switch (fq->fq_type) {
+ case FQ_TYPE_RX_DEFAULT:
+ str = "Rx default";
+ break;
+ case FQ_TYPE_RX_ERROR:
+ str = "Rx error";
+ break;
+ case FQ_TYPE_TX_CONFIRM:
+ str = "Tx default confirmation";
+ break;
+ case FQ_TYPE_TX_CONF_MQ:
+ str = "Tx confirmation (mq)";
+ break;
+ case FQ_TYPE_TX_ERROR:
+ str = "Tx error";
+ break;
+ case FQ_TYPE_TX:
+ str = "Tx";
+ break;
+ default:
+ str = "Unknown";
+ }
+
+ if (prev && (abs(fq->fqid - prev->fqid) != 1 ||
+ str != prevstr)) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes,
+ "%s: %d\n", prevstr, prev->fqid);
+ else
+ bytes += sprintf(buf + bytes,
+ "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ if (prev && abs(fq->fqid - prev->fqid) == 1 &&
+ str == prevstr) {
+ last_fqid = fq->fqid;
+ } else {
+ first_fqid = fq->fqid;
+ last_fqid = fq->fqid;
+ }
+
+ prev = fq;
+ prevstr = str;
+ i++;
+ }
+
+ if (prev) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes, "%s: %d\n", prevstr,
+ prev->fqid);
+ else
+ bytes += sprintf(buf + bytes, "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ return bytes;
+}
+
+static ssize_t dpaa_eth_show_bpids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t bytes = 0;
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ int i = 0;
+
+ for (i = 0; i < priv->bp_count; i++)
+ bytes += snprintf(buf + bytes, PAGE_SIZE, "%u\n",
+ dpa_bp[i].bpid);
+
+ return bytes;
+}
+
+static struct device_attribute dpaa_eth_attrs[] = {
+ __ATTR(device_addr, S_IRUGO, dpaa_eth_show_addr, NULL),
+ __ATTR(fqids, S_IRUGO, dpaa_eth_show_fqids, NULL),
+ __ATTR(bpids, S_IRUGO, dpaa_eth_show_bpids, NULL),
+};
+
+void dpaa_eth_sysfs_init(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ if (device_create_file(dev, &dpaa_eth_attrs[i])) {
+ dev_err(dev, "Error creating sysfs file\n");
+ while (i > 0)
+ device_remove_file(dev, &dpaa_eth_attrs[--i]);
+ return;
+ }
+}
+EXPORT_SYMBOL(dpaa_eth_sysfs_init);
+
+void dpaa_eth_sysfs_remove(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ device_remove_file(dev, &dpaa_eth_attrs[i]);
+}
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 09/11] dpaa_eth: add debugfs counters
2015-03-17 18:58 ` [PATCH RFC 08/11] dpaa_eth: add sysfs exports Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` Madalin Bucur
0 siblings, 1 reply; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Add a series of counters to be exported through debugfs:
- add detailed counters for reception errors;
- add detailed counters for QMan enqueue reject events;
- count the number of fragmented skbs received from the stack;
- count all frames received on the Tx confirmation path;
- add congestion group statistics;
- count the number of interrupts for each CPU.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 +++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 35 ++++++++++++++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 41 ++++++++++++++++++++--
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 2 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 1 +
5 files changed, 89 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 22c2e8b..2f97ec3 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -209,6 +209,15 @@ static void _dpa_rx_error(struct net_device *net_dev,
percpu_priv->stats.rx_errors++;
+ if (fd->status & FM_PORT_FRM_ERR_DMA)
+ percpu_priv->rx_errors.dme++;
+ if (fd->status & FM_PORT_FRM_ERR_PHYSICAL)
+ percpu_priv->rx_errors.fpe++;
+ if (fd->status & FM_PORT_FRM_ERR_SIZE)
+ percpu_priv->rx_errors.fse++;
+ if (fd->status & FM_PORT_FRM_ERR_PRS_HDR_ERR)
+ percpu_priv->rx_errors.phe++;
+
dpa_fd_release(net_dev, fd);
}
@@ -272,6 +281,8 @@ static void __hot _dpa_tx_conf(struct net_device *net_dev,
percpu_priv->stats.tx_errors++;
}
+ percpu_priv->tx_confirm++;
+
skb = _dpa_cleanup_tx_fd(priv, fd);
dev_kfree_skb(skb);
@@ -407,6 +418,7 @@ static void priv_ern(struct qman_portal *portal,
percpu_priv->stats.tx_dropped++;
percpu_priv->stats.tx_fifo_errors++;
+ count_ern(percpu_priv, msg);
/* If we intended this buffer to go into the pool
* when the FM was done, we need to put it in
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 08cda76..ab31ecc 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -203,6 +203,25 @@ struct dpa_bp {
void (*free_buf_cb)(void *addr);
};
+struct dpa_rx_errors {
+ u64 dme; /* DMA Error */
+ u64 fpe; /* Frame Physical Error */
+ u64 fse; /* Frame Size Error */
+ u64 phe; /* Header Error */
+};
+
+/* Counters for QMan ERN frames - one counter per rejection code */
+struct dpa_ern_cnt {
+ u64 cg_tdrop; /* Congestion group taildrop */
+ u64 wred; /* WRED congestion */
+ u64 err_cond; /* Error condition */
+ u64 early_window; /* Order restoration, frame too early */
+ u64 late_window; /* Order restoration, frame too late */
+ u64 fq_tdrop; /* FQ taildrop */
+ u64 fq_retired; /* FQ is retired */
+ u64 orp_zero; /* ORP disabled */
+};
+
struct dpa_napi_portal {
struct napi_struct napi;
struct qman_portal *p;
@@ -211,7 +230,13 @@ struct dpa_napi_portal {
struct dpa_percpu_priv_s {
struct net_device *net_dev;
struct dpa_napi_portal *np;
+ u64 in_interrupt;
+ u64 tx_confirm;
+ /* fragmented (non-linear) skbuffs received from the stack */
+ u64 tx_frag_skbuffs;
struct rtnl_link_stats64 stats;
+ struct dpa_rx_errors rx_errors;
+ struct dpa_ern_cnt ern_cnt;
};
struct dpa_priv_s {
@@ -239,6 +264,15 @@ struct dpa_priv_s {
* (and the same) congestion group.
*/
struct qman_cgr cgr;
+ /* If congested, when it began. Used for performance stats. */
+ u32 congestion_start_jiffies;
+ /* Number of jiffies the Tx port was congested. */
+ u32 congested_jiffies;
+ /**
+ * Counter for the number of times the CGR
+ * entered congestion state
+ */
+ u32 cgr_congested_count;
} cgr_data;
/* Use a per-port CGR for ingress traffic. */
bool use_ingress_cgr;
@@ -304,6 +338,7 @@ static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv_s *percpu_priv,
np->p = portal;
napi_schedule(&np->napi);
+ percpu_priv->in_interrupt++;
return 1;
}
}
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 7921b64..e92183a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -782,10 +782,15 @@ static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
struct dpa_priv_s *priv = (struct dpa_priv_s *)container_of(cgr,
struct dpa_priv_s, cgr_data.cgr);
- if (congested)
+ if (congested) {
+ priv->cgr_data.congestion_start_jiffies = jiffies;
netif_tx_stop_all_queues(priv->net_dev);
- else
+ priv->cgr_data.cgr_congested_count++;
+ } else {
+ priv->cgr_data.congested_jiffies +=
+ (jiffies - priv->cgr_data.congestion_start_jiffies);
netif_tx_wake_all_queues(priv->net_dev);
+ }
}
int dpaa_eth_cgr_init(struct dpa_priv_s *priv)
@@ -1226,6 +1231,38 @@ dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
}
EXPORT_SYMBOL(dpa_fd_release);
+void count_ern(struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_mr_entry *msg)
+{
+ switch (msg->ern.rc & QM_MR_RC_MASK) {
+ case QM_MR_RC_CGR_TAILDROP:
+ percpu_priv->ern_cnt.cg_tdrop++;
+ break;
+ case QM_MR_RC_WRED:
+ percpu_priv->ern_cnt.wred++;
+ break;
+ case QM_MR_RC_ERROR:
+ percpu_priv->ern_cnt.err_cond++;
+ break;
+ case QM_MR_RC_ORPWINDOW_EARLY:
+ percpu_priv->ern_cnt.early_window++;
+ break;
+ case QM_MR_RC_ORPWINDOW_LATE:
+ percpu_priv->ern_cnt.late_window++;
+ break;
+ case QM_MR_RC_FQ_TAILDROP:
+ percpu_priv->ern_cnt.fq_tdrop++;
+ break;
+ case QM_MR_RC_ORPWINDOW_RETIRED:
+ percpu_priv->ern_cnt.fq_retired++;
+ break;
+ case QM_MR_RC_ORP_ZERO:
+ percpu_priv->ern_cnt.orp_zero++;
+ break;
+ }
+}
+EXPORT_SYMBOL(count_ern);
+
/**
* Turn on HW checksum computation for this outgoing frame.
* If the current protocol is not something we support in this regard
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 53da367..33acacc 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -121,6 +121,8 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
void dpa_release_sgt(struct qm_sg_entry *sgt);
void __attribute__((nonnull))
dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
+void count_ern(struct dpa_percpu_priv_s *percpu_priv,
+ const struct qm_mr_entry *msg);
int dpa_enable_tx_csum(struct dpa_priv_s *priv,
struct sk_buff *skb,
struct qm_fd *fd,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
index 410effd..74f22eb 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -656,6 +656,7 @@ int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
/* Just create a S/G fd based on the skb */
err = skb_to_sg_fd(priv, skb, &fd);
+ percpu_priv->tx_frag_skbuffs++;
} else {
/* Make sure we have enough headroom to accommodate private
* data, parse results, etc. Normally this shouldn't happen if
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 10/11] dpaa_eth: add debugfs entries
2015-03-17 18:58 ` [PATCH RFC 09/11] dpaa_eth: add debugfs counters Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
0 siblings, 0 replies; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Export per CPU counters through debugfs.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Kconfig | 7 +
drivers/net/ethernet/freescale/dpaa/Makefile | 3 +
drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c | 273 +++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h | 43 ++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 11 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 17 ++
7 files changed, 358 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index a124639..fc65d71 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -77,4 +77,11 @@ config FSL_DPAA_INGRESS_CS_THRESHOLD
The size in bytes of the ingress tail-drop threshold on FMan ports.
Traffic piling up above this value will be rejected by QMan and discarded by FMan.
+config FSL_DPAA_ETH_DEBUGFS
+ bool "DPAA Ethernet debugfs interface"
+ depends on DEBUG_FS && FSL_DPAA_ETH
+ default y
+ ---help---
+ This option compiles debugfs code for the DPAA Ethernet driver.
+
endif # FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 53e5dcc..b881dd2 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -12,3 +12,6 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+ifeq ($(CONFIG_FSL_DPAA_ETH_DEBUGFS),y)
+fsl_dpa-objs += dpaa_debugfs.o
+endif
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
new file mode 100644
index 0000000..5627065
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
@@ -0,0 +1,273 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <soc/fsl/qman.h> /* struct qm_mcr_querycgr */
+#include <linux/debugfs.h>
+#include <asm/debug.h>
+#include "dpaa_debugfs.h"
+#include "dpaa_eth.h" /* struct dpa_priv_s, dpa_percpu_priv_s, dpa_bp */
+
+#define DPA_DEBUGFS_DESCRIPTION "FSL DPAA Ethernet debugfs entries"
+#define DPA_ETH_DEBUGFS_ROOT "fsl_dpa"
+
+static int __cold dpa_debugfs_open(struct inode *inode, struct file *file);
+
+static struct dentry *dpa_debugfs_root;
+static const struct file_operations dpa_debugfs_fops = {
+ .open = dpa_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int dpa_debugfs_show(struct seq_file *file, void *offset)
+{
+ int i;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv, total;
+ struct dpa_bp *dpa_bp;
+ unsigned int dpa_bp_count = 0;
+ unsigned int count_total = 0;
+ struct qm_mcr_querycgr query_cgr;
+
+ BUG_ON(!offset);
+
+ priv = netdev_priv((struct net_device *)file->private);
+
+ dpa_bp = priv->dpa_bp;
+
+ memset(&total, 0, sizeof(total));
+
+ /* "Standard" counters */
+ seq_printf(file, "\nDPA counters for %s:\n", priv->net_dev->name);
+ seq_puts(file, "CPU irqs rx tx recycle ");
+ seq_puts(file, "confirm tx sg tx err rx err bp count\n");
+
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ if (dpa_bp->percpu_count)
+ dpa_bp_count = *(per_cpu_ptr(dpa_bp->percpu_count, i));
+
+ total.in_interrupt += percpu_priv->in_interrupt;
+ total.stats.rx_packets += percpu_priv->stats.rx_packets;
+ total.stats.tx_packets += percpu_priv->stats.tx_packets;
+ total.tx_confirm += percpu_priv->tx_confirm;
+ total.tx_frag_skbuffs += percpu_priv->tx_frag_skbuffs;
+ total.stats.tx_errors += percpu_priv->stats.tx_errors;
+ total.stats.rx_errors += percpu_priv->stats.rx_errors;
+ count_total += dpa_bp_count;
+
+ seq_printf(file, " %hu %8llu %8llu %8llu ",
+ i,
+ percpu_priv->in_interrupt,
+ percpu_priv->stats.rx_packets,
+ percpu_priv->stats.tx_packets);
+ seq_printf(file, "%8llu %8llu %8llu %8llu %8d\n",
+ percpu_priv->tx_confirm,
+ percpu_priv->tx_frag_skbuffs,
+ percpu_priv->stats.tx_errors,
+ percpu_priv->stats.rx_errors,
+ dpa_bp_count);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu ",
+ total.in_interrupt,
+ total.stats.rx_packets,
+ total.stats.tx_packets);
+ seq_printf(file, "%8llu %8llu %8llu %8llu %8d\n",
+ total.tx_confirm,
+ total.tx_frag_skbuffs,
+ total.stats.tx_errors,
+ total.stats.rx_errors,
+ count_total);
+
+ /* Congestion stats */
+ seq_puts(file, "\nDevice congestion stats:\n");
+ seq_printf(file, "Device has been congested for %d ms.\n",
+ jiffies_to_msecs(priv->cgr_data.congested_jiffies));
+
+ if (qman_query_cgr(&priv->cgr_data.cgr, &query_cgr) != 0) {
+ seq_printf(file, "CGR id %d - failed to query values\n",
+ priv->cgr_data.cgr.cgrid);
+ } else {
+ seq_printf(file, "CGR id %d avg count: %llu\n",
+ priv->cgr_data.cgr.cgrid,
+ qm_mcr_querycgr_a_get64(&query_cgr));
+ seq_printf(file, "Device entered congestion %u times. ",
+ priv->cgr_data.cgr_congested_count);
+ seq_printf(file, "Current congestion state is: %s.\n",
+ query_cgr.cgr.cs ? "congested" : "not congested");
+ /* Reset congestion stats (like QMan CGR API does) */
+ priv->cgr_data.congested_jiffies = 0;
+ priv->cgr_data.cgr_congested_count = 0;
+ }
+
+ /* Rx Errors demultiplexing */
+ seq_puts(file, "\nDPA RX Errors:\nCPU dma err phys err");
+ seq_puts(file, " size err hdr err csum err\n");
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ total.rx_errors.dme += percpu_priv->rx_errors.dme;
+ total.rx_errors.fpe += percpu_priv->rx_errors.fpe;
+ total.rx_errors.fse += percpu_priv->rx_errors.fse;
+ total.rx_errors.phe += percpu_priv->rx_errors.phe;
+
+ seq_printf(file, " %hu %8llu %8llu ",
+ i,
+ percpu_priv->rx_errors.dme,
+ percpu_priv->rx_errors.fpe);
+ seq_printf(file, "%8llu %8llu\n",
+ percpu_priv->rx_errors.fse,
+ percpu_priv->rx_errors.phe);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu %8llu\n",
+ total.rx_errors.dme,
+ total.rx_errors.fpe,
+ total.rx_errors.fse,
+ total.rx_errors.phe);
+
+ /* ERN demultiplexing */
+ seq_puts(file, "\nDPA ERN counters:\n CPU cg_td wred ");
+ seq_puts(file, "err_cond early_w late_w fq_td fq_ret");
+ seq_puts(file, " orp_z\n");
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ total.ern_cnt.cg_tdrop += percpu_priv->ern_cnt.cg_tdrop;
+ total.ern_cnt.wred += percpu_priv->ern_cnt.wred;
+ total.ern_cnt.err_cond += percpu_priv->ern_cnt.err_cond;
+ total.ern_cnt.early_window += percpu_priv->ern_cnt.early_window;
+ total.ern_cnt.late_window += percpu_priv->ern_cnt.late_window;
+ total.ern_cnt.fq_tdrop += percpu_priv->ern_cnt.fq_tdrop;
+ total.ern_cnt.fq_retired += percpu_priv->ern_cnt.fq_retired;
+ total.ern_cnt.orp_zero += percpu_priv->ern_cnt.orp_zero;
+
+ seq_printf(file, " %hu %8llu %8llu %8llu %8llu ",
+ i,
+ percpu_priv->ern_cnt.cg_tdrop,
+ percpu_priv->ern_cnt.wred,
+ percpu_priv->ern_cnt.err_cond,
+ percpu_priv->ern_cnt.early_window);
+ seq_printf(file, "%8llu %8llu %8llu %8llu\n",
+ percpu_priv->ern_cnt.late_window,
+ percpu_priv->ern_cnt.fq_tdrop,
+ percpu_priv->ern_cnt.fq_retired,
+ percpu_priv->ern_cnt.orp_zero);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu %8llu ",
+ total.ern_cnt.cg_tdrop,
+ total.ern_cnt.wred,
+ total.ern_cnt.err_cond,
+ total.ern_cnt.early_window);
+ seq_printf(file, "%8llu %8llu %8llu %8llu\n",
+ total.ern_cnt.late_window,
+ total.ern_cnt.fq_tdrop,
+ total.ern_cnt.fq_retired,
+ total.ern_cnt.orp_zero);
+
+ return 0;
+}
+
+static int __cold dpa_debugfs_open(struct inode *inode, struct file *file)
+{
+ int _errno;
+ const struct net_device *net_dev;
+
+ _errno = single_open(file, dpa_debugfs_show, inode->i_private);
+ if (unlikely(_errno < 0)) {
+ net_dev = (struct net_device *)inode->i_private;
+
+ if (netif_msg_drv((struct dpa_priv_s *)netdev_priv(net_dev)))
+ netdev_err(net_dev, "single_open() = %d\n",
+ _errno);
+ }
+ return _errno;
+}
+
+int dpa_netdev_debugfs_create(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ if (unlikely(!dpa_debugfs_root)) {
+ pr_err(KBUILD_MODNAME ": %s:%hu:%s(): \t%s\n",
+ KBUILD_BASENAME ".c", __LINE__, __func__,
+ "root debugfs missing, possible module ordering issue");
+ return -ENOMEM;
+ }
+
+ priv->debugfs_file = debugfs_create_file(net_dev->name,
+ S_IRUGO,
+ dpa_debugfs_root,
+ net_dev,
+ &dpa_debugfs_fops);
+ if (unlikely(!priv->debugfs_file)) {
+ netdev_err(net_dev, "debugfs_create_file(%s/%s/%s)",
+ powerpc_debugfs_root->d_iname,
+ dpa_debugfs_root->d_iname,
+ net_dev->name);
+
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void dpa_netdev_debugfs_remove(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ debugfs_remove(priv->debugfs_file);
+}
+
+int __init dpa_debugfs_module_init(void)
+{
+ int _errno = 0;
+
+ pr_info(KBUILD_MODNAME ": " DPA_DEBUGFS_DESCRIPTION " (" VERSION ")\n");
+
+ dpa_debugfs_root = debugfs_create_dir(DPA_ETH_DEBUGFS_ROOT,
+ powerpc_debugfs_root);
+ if (unlikely(!dpa_debugfs_root)) {
+ _errno = -ENOMEM;
+ pr_err(KBUILD_MODNAME ": %s:%hu:%s():\n",
+ KBUILD_BASENAME ".c", __LINE__, __func__);
+ pr_err("\tdebugfs_create_dir(%s/" KBUILD_MODNAME ") = %d\n",
+ powerpc_debugfs_root->d_iname, _errno);
+ }
+
+ return _errno;
+}
+
+void __exit dpa_debugfs_module_exit(void)
+{
+ debugfs_remove(dpa_debugfs_root);
+}
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
new file mode 100644
index 0000000..188ddf6
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
@@ -0,0 +1,43 @@
+/* Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DPAA_DEBUGFS_H_
+#define DPAA_DEBUGFS_H_
+
+#include <linux/netdevice.h>
+#include <linux/dcache.h> /* struct dentry needed in dpaa_eth.h */
+
+int dpa_netdev_debugfs_create(struct net_device *net_dev);
+void dpa_netdev_debugfs_remove(struct net_device *net_dev);
+int __init dpa_debugfs_module_init(void);
+void __exit dpa_debugfs_module_exit(void);
+
+#endif /* DPAA_DEBUGFS_H_ */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 2f97ec3..72844c3 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -58,6 +58,9 @@
#include "mac.h"
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+#include "dpaa_debugfs.h"
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
#define DPA_NAPI_WEIGHT 64
@@ -933,6 +936,10 @@ static int __init __cold dpa_load(void)
pr_info(DPA_DESCRIPTION " (" VERSION ")\n");
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ dpa_debugfs_module_init();
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
/* initialise dpaa_eth mirror values */
dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
dpa_max_frm = fm_get_max_frm();
@@ -958,6 +965,10 @@ static void __exit __cold dpa_unload(void)
platform_driver_unregister(&dpa_driver);
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ dpa_debugfs_module_exit();
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
/* Only one channel is used and needs to be relased after all
* interfaces are removed
*/
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index ab31ecc..ace665f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -256,6 +256,10 @@ struct dpa_priv_s {
u16 channel; /* "fsl,qman-channel-id" */
struct list_head dpa_fq_list;
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ struct dentry *debugfs_file;
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
u32 msg_enable; /* net_device message level */
struct {
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index e92183a..71c108f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -43,6 +43,9 @@
#include <linux/if_vlan.h> /* vlan_eth_hdr */
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+#include "dpaa_debugfs.h"
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
#include "mac.h"
/* Size in bytes of the FQ taildrop threshold */
@@ -92,6 +95,15 @@ int dpa_netdev_init(struct net_device *net_dev,
return err;
}
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ /* create debugfs entry for this net_device */
+ err = dpa_netdev_debugfs_create(net_dev);
+ if (err) {
+ unregister_netdev(net_dev);
+ return err;
+ }
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
return 0;
}
EXPORT_SYMBOL(dpa_netdev_init);
@@ -313,6 +325,11 @@ int __cold dpa_remove(struct platform_device *pdev)
if (priv->buf_layout)
devm_kfree(dev, priv->buf_layout);
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ /* remove debugfs entry for this net_device */
+ dpa_netdev_debugfs_remove(net_dev);
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
free_netdev(net_dev);
return err;
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 10/11] dpaa_eth: add debugfs entries
@ 2015-03-17 18:58 ` Madalin Bucur
0 siblings, 0 replies; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel; +Cc: Madalin Bucur
Export per CPU counters through debugfs.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Kconfig | 7 +
drivers/net/ethernet/freescale/dpaa/Makefile | 3 +
drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c | 273 +++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h | 43 ++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 11 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 17 ++
7 files changed, 358 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index a124639..fc65d71 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -77,4 +77,11 @@ config FSL_DPAA_INGRESS_CS_THRESHOLD
The size in bytes of the ingress tail-drop threshold on FMan ports.
Traffic piling up above this value will be rejected by QMan and discarded by FMan.
+config FSL_DPAA_ETH_DEBUGFS
+ bool "DPAA Ethernet debugfs interface"
+ depends on DEBUG_FS && FSL_DPAA_ETH
+ default y
+ ---help---
+ This option compiles debugfs code for the DPAA Ethernet driver.
+
endif # FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 53e5dcc..b881dd2 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -12,3 +12,6 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+ifeq ($(CONFIG_FSL_DPAA_ETH_DEBUGFS),y)
+fsl_dpa-objs += dpaa_debugfs.o
+endif
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
new file mode 100644
index 0000000..5627065
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.c
@@ -0,0 +1,273 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <soc/fsl/qman.h> /* struct qm_mcr_querycgr */
+#include <linux/debugfs.h>
+#include <asm/debug.h>
+#include "dpaa_debugfs.h"
+#include "dpaa_eth.h" /* struct dpa_priv_s, dpa_percpu_priv_s, dpa_bp */
+
+#define DPA_DEBUGFS_DESCRIPTION "FSL DPAA Ethernet debugfs entries"
+#define DPA_ETH_DEBUGFS_ROOT "fsl_dpa"
+
+static int __cold dpa_debugfs_open(struct inode *inode, struct file *file);
+
+static struct dentry *dpa_debugfs_root;
+static const struct file_operations dpa_debugfs_fops = {
+ .open = dpa_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int dpa_debugfs_show(struct seq_file *file, void *offset)
+{
+ int i;
+ struct dpa_priv_s *priv;
+ struct dpa_percpu_priv_s *percpu_priv, total;
+ struct dpa_bp *dpa_bp;
+ unsigned int dpa_bp_count = 0;
+ unsigned int count_total = 0;
+ struct qm_mcr_querycgr query_cgr;
+
+ BUG_ON(!offset);
+
+ priv = netdev_priv((struct net_device *)file->private);
+
+ dpa_bp = priv->dpa_bp;
+
+ memset(&total, 0, sizeof(total));
+
+ /* "Standard" counters */
+ seq_printf(file, "\nDPA counters for %s:\n", priv->net_dev->name);
+ seq_puts(file, "CPU irqs rx tx recycle ");
+ seq_puts(file, "confirm tx sg tx err rx err bp count\n");
+
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ if (dpa_bp->percpu_count)
+ dpa_bp_count = *(per_cpu_ptr(dpa_bp->percpu_count, i));
+
+ total.in_interrupt += percpu_priv->in_interrupt;
+ total.stats.rx_packets += percpu_priv->stats.rx_packets;
+ total.stats.tx_packets += percpu_priv->stats.tx_packets;
+ total.tx_confirm += percpu_priv->tx_confirm;
+ total.tx_frag_skbuffs += percpu_priv->tx_frag_skbuffs;
+ total.stats.tx_errors += percpu_priv->stats.tx_errors;
+ total.stats.rx_errors += percpu_priv->stats.rx_errors;
+ count_total += dpa_bp_count;
+
+ seq_printf(file, " %hu %8llu %8llu %8llu ",
+ i,
+ percpu_priv->in_interrupt,
+ percpu_priv->stats.rx_packets,
+ percpu_priv->stats.tx_packets);
+ seq_printf(file, "%8llu %8llu %8llu %8llu %8d\n",
+ percpu_priv->tx_confirm,
+ percpu_priv->tx_frag_skbuffs,
+ percpu_priv->stats.tx_errors,
+ percpu_priv->stats.rx_errors,
+ dpa_bp_count);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu ",
+ total.in_interrupt,
+ total.stats.rx_packets,
+ total.stats.tx_packets);
+ seq_printf(file, "%8llu %8llu %8llu %8llu %8d\n",
+ total.tx_confirm,
+ total.tx_frag_skbuffs,
+ total.stats.tx_errors,
+ total.stats.rx_errors,
+ count_total);
+
+ /* Congestion stats */
+ seq_puts(file, "\nDevice congestion stats:\n");
+ seq_printf(file, "Device has been congested for %d ms.\n",
+ jiffies_to_msecs(priv->cgr_data.congested_jiffies));
+
+ if (qman_query_cgr(&priv->cgr_data.cgr, &query_cgr) != 0) {
+ seq_printf(file, "CGR id %d - failed to query values\n",
+ priv->cgr_data.cgr.cgrid);
+ } else {
+ seq_printf(file, "CGR id %d avg count: %llu\n",
+ priv->cgr_data.cgr.cgrid,
+ qm_mcr_querycgr_a_get64(&query_cgr));
+ seq_printf(file, "Device entered congestion %u times. ",
+ priv->cgr_data.cgr_congested_count);
+ seq_printf(file, "Current congestion state is: %s.\n",
+ query_cgr.cgr.cs ? "congested" : "not congested");
+ /* Reset congestion stats (like QMan CGR API does) */
+ priv->cgr_data.congested_jiffies = 0;
+ priv->cgr_data.cgr_congested_count = 0;
+ }
+
+ /* Rx Errors demultiplexing */
+ seq_puts(file, "\nDPA RX Errors:\nCPU dma err phys err");
+ seq_puts(file, " size err hdr err csum err\n");
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ total.rx_errors.dme += percpu_priv->rx_errors.dme;
+ total.rx_errors.fpe += percpu_priv->rx_errors.fpe;
+ total.rx_errors.fse += percpu_priv->rx_errors.fse;
+ total.rx_errors.phe += percpu_priv->rx_errors.phe;
+
+ seq_printf(file, " %hu %8llu %8llu ",
+ i,
+ percpu_priv->rx_errors.dme,
+ percpu_priv->rx_errors.fpe);
+ seq_printf(file, "%8llu %8llu\n",
+ percpu_priv->rx_errors.fse,
+ percpu_priv->rx_errors.phe);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu %8llu\n",
+ total.rx_errors.dme,
+ total.rx_errors.fpe,
+ total.rx_errors.fse,
+ total.rx_errors.phe);
+
+ /* ERN demultiplexing */
+ seq_puts(file, "\nDPA ERN counters:\n CPU cg_td wred ");
+ seq_puts(file, "err_cond early_w late_w fq_td fq_ret");
+ seq_puts(file, " orp_z\n");
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ total.ern_cnt.cg_tdrop += percpu_priv->ern_cnt.cg_tdrop;
+ total.ern_cnt.wred += percpu_priv->ern_cnt.wred;
+ total.ern_cnt.err_cond += percpu_priv->ern_cnt.err_cond;
+ total.ern_cnt.early_window += percpu_priv->ern_cnt.early_window;
+ total.ern_cnt.late_window += percpu_priv->ern_cnt.late_window;
+ total.ern_cnt.fq_tdrop += percpu_priv->ern_cnt.fq_tdrop;
+ total.ern_cnt.fq_retired += percpu_priv->ern_cnt.fq_retired;
+ total.ern_cnt.orp_zero += percpu_priv->ern_cnt.orp_zero;
+
+ seq_printf(file, " %hu %8llu %8llu %8llu %8llu ",
+ i,
+ percpu_priv->ern_cnt.cg_tdrop,
+ percpu_priv->ern_cnt.wred,
+ percpu_priv->ern_cnt.err_cond,
+ percpu_priv->ern_cnt.early_window);
+ seq_printf(file, "%8llu %8llu %8llu %8llu\n",
+ percpu_priv->ern_cnt.late_window,
+ percpu_priv->ern_cnt.fq_tdrop,
+ percpu_priv->ern_cnt.fq_retired,
+ percpu_priv->ern_cnt.orp_zero);
+ }
+ seq_printf(file, "Total %8llu %8llu %8llu %8llu ",
+ total.ern_cnt.cg_tdrop,
+ total.ern_cnt.wred,
+ total.ern_cnt.err_cond,
+ total.ern_cnt.early_window);
+ seq_printf(file, "%8llu %8llu %8llu %8llu\n",
+ total.ern_cnt.late_window,
+ total.ern_cnt.fq_tdrop,
+ total.ern_cnt.fq_retired,
+ total.ern_cnt.orp_zero);
+
+ return 0;
+}
+
+static int __cold dpa_debugfs_open(struct inode *inode, struct file *file)
+{
+ int _errno;
+ const struct net_device *net_dev;
+
+ _errno = single_open(file, dpa_debugfs_show, inode->i_private);
+ if (unlikely(_errno < 0)) {
+ net_dev = (struct net_device *)inode->i_private;
+
+ if (netif_msg_drv((struct dpa_priv_s *)netdev_priv(net_dev)))
+ netdev_err(net_dev, "single_open() = %d\n",
+ _errno);
+ }
+ return _errno;
+}
+
+int dpa_netdev_debugfs_create(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ if (unlikely(!dpa_debugfs_root)) {
+ pr_err(KBUILD_MODNAME ": %s:%hu:%s(): \t%s\n",
+ KBUILD_BASENAME ".c", __LINE__, __func__,
+ "root debugfs missing, possible module ordering issue");
+ return -ENOMEM;
+ }
+
+ priv->debugfs_file = debugfs_create_file(net_dev->name,
+ S_IRUGO,
+ dpa_debugfs_root,
+ net_dev,
+ &dpa_debugfs_fops);
+ if (unlikely(!priv->debugfs_file)) {
+ netdev_err(net_dev, "debugfs_create_file(%s/%s/%s)",
+ powerpc_debugfs_root->d_iname,
+ dpa_debugfs_root->d_iname,
+ net_dev->name);
+
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void dpa_netdev_debugfs_remove(struct net_device *net_dev)
+{
+ struct dpa_priv_s *priv = netdev_priv(net_dev);
+
+ debugfs_remove(priv->debugfs_file);
+}
+
+int __init dpa_debugfs_module_init(void)
+{
+ int _errno = 0;
+
+ pr_info(KBUILD_MODNAME ": " DPA_DEBUGFS_DESCRIPTION " (" VERSION ")\n");
+
+ dpa_debugfs_root = debugfs_create_dir(DPA_ETH_DEBUGFS_ROOT,
+ powerpc_debugfs_root);
+ if (unlikely(!dpa_debugfs_root)) {
+ _errno = -ENOMEM;
+ pr_err(KBUILD_MODNAME ": %s:%hu:%s():\n",
+ KBUILD_BASENAME ".c", __LINE__, __func__);
+ pr_err("\tdebugfs_create_dir(%s/" KBUILD_MODNAME ") = %d\n",
+ powerpc_debugfs_root->d_iname, _errno);
+ }
+
+ return _errno;
+}
+
+void __exit dpa_debugfs_module_exit(void)
+{
+ debugfs_remove(dpa_debugfs_root);
+}
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
new file mode 100644
index 0000000..188ddf6
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_debugfs.h
@@ -0,0 +1,43 @@
+/* Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DPAA_DEBUGFS_H_
+#define DPAA_DEBUGFS_H_
+
+#include <linux/netdevice.h>
+#include <linux/dcache.h> /* struct dentry needed in dpaa_eth.h */
+
+int dpa_netdev_debugfs_create(struct net_device *net_dev);
+void dpa_netdev_debugfs_remove(struct net_device *net_dev);
+int __init dpa_debugfs_module_init(void);
+void __exit dpa_debugfs_module_exit(void);
+
+#endif /* DPAA_DEBUGFS_H_ */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 2f97ec3..72844c3 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -58,6 +58,9 @@
#include "mac.h"
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+#include "dpaa_debugfs.h"
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
#define DPA_NAPI_WEIGHT 64
@@ -933,6 +936,10 @@ static int __init __cold dpa_load(void)
pr_info(DPA_DESCRIPTION " (" VERSION ")\n");
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ dpa_debugfs_module_init();
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
/* initialise dpaa_eth mirror values */
dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
dpa_max_frm = fm_get_max_frm();
@@ -958,6 +965,10 @@ static void __exit __cold dpa_unload(void)
platform_driver_unregister(&dpa_driver);
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ dpa_debugfs_module_exit();
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
/* Only one channel is used and needs to be relased after all
* interfaces are removed
*/
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index ab31ecc..ace665f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -256,6 +256,10 @@ struct dpa_priv_s {
u16 channel; /* "fsl,qman-channel-id" */
struct list_head dpa_fq_list;
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ struct dentry *debugfs_file;
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
u32 msg_enable; /* net_device message level */
struct {
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index e92183a..71c108f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -43,6 +43,9 @@
#include <linux/if_vlan.h> /* vlan_eth_hdr */
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+#include "dpaa_debugfs.h"
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
#include "mac.h"
/* Size in bytes of the FQ taildrop threshold */
@@ -92,6 +95,15 @@ int dpa_netdev_init(struct net_device *net_dev,
return err;
}
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ /* create debugfs entry for this net_device */
+ err = dpa_netdev_debugfs_create(net_dev);
+ if (err) {
+ unregister_netdev(net_dev);
+ return err;
+ }
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
return 0;
}
EXPORT_SYMBOL(dpa_netdev_init);
@@ -313,6 +325,11 @@ int __cold dpa_remove(struct platform_device *pdev)
if (priv->buf_layout)
devm_kfree(dev, priv->buf_layout);
+#ifdef CONFIG_FSL_DPAA_ETH_DEBUGFS
+ /* remove debugfs entry for this net_device */
+ dpa_netdev_debugfs_remove(net_dev);
+#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+
free_netdev(net_dev);
return err;
--
1.7.11.7
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 11/11] dpaa_eth: add trace points
2015-03-17 18:58 ` Madalin Bucur
@ 2015-03-17 18:58 ` Madalin Bucur
-1 siblings, 0 replies; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel
Cc: Madalin Bucur, Ruxandra Ioana Radulescu
Add trace points on the hot processing path.
Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_trace.h | 143 +++++++++++++++++++++
4 files changed, 160 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index b881dd2..2e35ecd 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -12,6 +12,7 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+CFLAGS_dpaa_eth.o := -I$(src)
ifeq ($(CONFIG_FSL_DPAA_ETH_DEBUGFS),y)
fsl_dpa-objs += dpaa_debugfs.o
endif
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 72844c3..6512530 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -62,6 +62,12 @@
#include "dpaa_debugfs.h"
#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
+ * using trace events only need to #include <trace/events/sched.h>
+ */
+#define CREATE_TRACE_POINTS
+#include "dpaa_eth_trace.h"
+
#define DPA_NAPI_WEIGHT 64
/* Valid checksum indication */
@@ -337,6 +343,9 @@ priv_rx_default_dqrr(struct qman_portal *portal,
priv = netdev_priv(net_dev);
dpa_bp = priv->dpa_bp;
+ /* Trace the Rx fd */
+ trace_dpa_rx_fd(net_dev, fq, &dq->fd);
+
/* IRQ handler, non-migratable; safe to use raw_cpu_ptr here */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
count_ptr = raw_cpu_ptr(dpa_bp->percpu_count);
@@ -393,6 +402,9 @@ priv_tx_conf_default_dqrr(struct qman_portal *portal,
net_dev = ((struct dpa_fq *)fq)->net_dev;
priv = netdev_priv(net_dev);
+ /* Trace the fd */
+ trace_dpa_tx_conf_fd(net_dev, fq, &dq->fd);
+
/* Non-migratable context, safe to use raw_cpu_ptr */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index ace665f..6f83899 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -35,6 +35,7 @@
#include <soc/fsl/qman.h> /* struct qman_fq */
#include "fm_ext.h"
+#include "dpaa_eth_trace.h"
extern int dpa_rx_extra_headroom;
extern int dpa_max_frm;
@@ -431,6 +432,9 @@ static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
_dpa_get_tx_conf_queue(priv, egress_fq)
);
+ /* Trace this Tx fd */
+ trace_dpa_tx_fd(priv->net_dev, egress_fq, fd);
+
for (i = 0; i < 100000; i++) {
err = qman_enqueue(egress_fq, fd, 0);
if (err != -EBUSY)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
new file mode 100644
index 0000000..e00d116
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
@@ -0,0 +1,143 @@
+/* Copyright 2013-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dpaa_eth
+
+#if !defined(_DPAA_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _DPAA_ETH_TRACE_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include "dpaa_eth.h"
+#include <linux/tracepoint.h>
+
+#define fd_format_name(format) { qm_fd_##format, #format }
+#define fd_format_list \
+ fd_format_name(contig), \
+ fd_format_name(sg)
+#define TR_FMT "[%s] fqid=%d, fd: addr=0x%llx, format=%s, off=%u, len=%u," \
+ " status=0x%08x"
+
+/* This is used to declare a class of events.
+ * individual events of this type will be defined below.
+ */
+
+/* Store details about a frame descriptor and the FQ on which it was
+ * transmitted/received.
+ */
+DECLARE_EVENT_CLASS(dpaa_eth_fd,
+ /* Trace function prototype */
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ /* Repeat argument list here */
+ TP_ARGS(netdev, fq, fd),
+
+ /* A structure containing the relevant information we want to record.
+ * Declare name and type for each normal element, name, type and size
+ * for arrays. Use __string for variable length strings.
+ */
+ TP_STRUCT__entry(
+ __field(u32, fqid)
+ __field(u64, fd_addr)
+ __field(u8, fd_format)
+ __field(u16, fd_offset)
+ __field(u32, fd_length)
+ __field(u32, fd_status)
+ __string(name, netdev->name)
+ ),
+
+ /* The function that assigns values to the above declared fields */
+ TP_fast_assign(
+ __entry->fqid = fq->fqid;
+ __entry->fd_addr = qm_fd_addr_get64(fd);
+ __entry->fd_format = fd->format;
+ __entry->fd_offset = dpa_fd_offset(fd);
+ __entry->fd_length = dpa_fd_length(fd);
+ __entry->fd_status = fd->status;
+ __assign_str(name, netdev->name);
+ ),
+
+ /* This is what gets printed when the trace event is triggered */
+ TP_printk(TR_FMT,
+ __get_str(name), __entry->fqid, __entry->fd_addr,
+ __print_symbolic(__entry->fd_format, fd_format_list),
+ __entry->fd_offset, __entry->fd_length, __entry->fd_status)
+);
+
+/* Now declare events of the above type. Format is:
+ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class
+ */
+
+/* Tx (egress) fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Rx fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_rx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Tx confirmation fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_conf_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* If only one event of a certain type needs to be declared, use TRACE_EVENT().
+ * The syntax is the same as for DECLARE_EVENT_CLASS().
+ */
+
+#endif /* _DPAA_ETH_TRACE_H */
+
+/* This must be outside ifdef _DPAA_ETH_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE dpaa_eth_trace
+#include <trace/define_trace.h>
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH RFC 11/11] dpaa_eth: add trace points
@ 2015-03-17 18:58 ` Madalin Bucur
0 siblings, 0 replies; 15+ messages in thread
From: Madalin Bucur @ 2015-03-17 18:58 UTC (permalink / raw)
To: netdev, linuxppc-dev, linux-kernel
Cc: Ruxandra Ioana Radulescu, Madalin Bucur
Add trace points on the hot processing path.
Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_trace.h | 143 +++++++++++++++++++++
4 files changed, 160 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index b881dd2..2e35ecd 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -12,6 +12,7 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+CFLAGS_dpaa_eth.o := -I$(src)
ifeq ($(CONFIG_FSL_DPAA_ETH_DEBUGFS),y)
fsl_dpa-objs += dpaa_debugfs.o
endif
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 72844c3..6512530 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -62,6 +62,12 @@
#include "dpaa_debugfs.h"
#endif /* CONFIG_FSL_DPAA_ETH_DEBUGFS */
+/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
+ * using trace events only need to #include <trace/events/sched.h>
+ */
+#define CREATE_TRACE_POINTS
+#include "dpaa_eth_trace.h"
+
#define DPA_NAPI_WEIGHT 64
/* Valid checksum indication */
@@ -337,6 +343,9 @@ priv_rx_default_dqrr(struct qman_portal *portal,
priv = netdev_priv(net_dev);
dpa_bp = priv->dpa_bp;
+ /* Trace the Rx fd */
+ trace_dpa_rx_fd(net_dev, fq, &dq->fd);
+
/* IRQ handler, non-migratable; safe to use raw_cpu_ptr here */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
count_ptr = raw_cpu_ptr(dpa_bp->percpu_count);
@@ -393,6 +402,9 @@ priv_tx_conf_default_dqrr(struct qman_portal *portal,
net_dev = ((struct dpa_fq *)fq)->net_dev;
priv = netdev_priv(net_dev);
+ /* Trace the fd */
+ trace_dpa_tx_conf_fd(net_dev, fq, &dq->fd);
+
/* Non-migratable context, safe to use raw_cpu_ptr */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index ace665f..6f83899 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -35,6 +35,7 @@
#include <soc/fsl/qman.h> /* struct qman_fq */
#include "fm_ext.h"
+#include "dpaa_eth_trace.h"
extern int dpa_rx_extra_headroom;
extern int dpa_max_frm;
@@ -431,6 +432,9 @@ static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
_dpa_get_tx_conf_queue(priv, egress_fq)
);
+ /* Trace this Tx fd */
+ trace_dpa_tx_fd(priv->net_dev, egress_fq, fd);
+
for (i = 0; i < 100000; i++) {
err = qman_enqueue(egress_fq, fd, 0);
if (err != -EBUSY)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
new file mode 100644
index 0000000..e00d116
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
@@ -0,0 +1,143 @@
+/* Copyright 2013-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dpaa_eth
+
+#if !defined(_DPAA_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _DPAA_ETH_TRACE_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include "dpaa_eth.h"
+#include <linux/tracepoint.h>
+
+#define fd_format_name(format) { qm_fd_##format, #format }
+#define fd_format_list \
+ fd_format_name(contig), \
+ fd_format_name(sg)
+#define TR_FMT "[%s] fqid=%d, fd: addr=0x%llx, format=%s, off=%u, len=%u," \
+ " status=0x%08x"
+
+/* This is used to declare a class of events.
+ * individual events of this type will be defined below.
+ */
+
+/* Store details about a frame descriptor and the FQ on which it was
+ * transmitted/received.
+ */
+DECLARE_EVENT_CLASS(dpaa_eth_fd,
+ /* Trace function prototype */
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ /* Repeat argument list here */
+ TP_ARGS(netdev, fq, fd),
+
+ /* A structure containing the relevant information we want to record.
+ * Declare name and type for each normal element, name, type and size
+ * for arrays. Use __string for variable length strings.
+ */
+ TP_STRUCT__entry(
+ __field(u32, fqid)
+ __field(u64, fd_addr)
+ __field(u8, fd_format)
+ __field(u16, fd_offset)
+ __field(u32, fd_length)
+ __field(u32, fd_status)
+ __string(name, netdev->name)
+ ),
+
+ /* The function that assigns values to the above declared fields */
+ TP_fast_assign(
+ __entry->fqid = fq->fqid;
+ __entry->fd_addr = qm_fd_addr_get64(fd);
+ __entry->fd_format = fd->format;
+ __entry->fd_offset = dpa_fd_offset(fd);
+ __entry->fd_length = dpa_fd_length(fd);
+ __entry->fd_status = fd->status;
+ __assign_str(name, netdev->name);
+ ),
+
+ /* This is what gets printed when the trace event is triggered */
+ TP_printk(TR_FMT,
+ __get_str(name), __entry->fqid, __entry->fd_addr,
+ __print_symbolic(__entry->fd_format, fd_format_list),
+ __entry->fd_offset, __entry->fd_length, __entry->fd_status)
+);
+
+/* Now declare events of the above type. Format is:
+ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class
+ */
+
+/* Tx (egress) fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Rx fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_rx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Tx confirmation fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_conf_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* If only one event of a certain type needs to be declared, use TRACE_EVENT().
+ * The syntax is the same as for DECLARE_EVENT_CLASS().
+ */
+
+#endif /* _DPAA_ETH_TRACE_H */
+
+/* This must be outside ifdef _DPAA_ETH_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE dpaa_eth_trace
+#include <trace/define_trace.h>
--
1.7.11.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet
2015-03-17 18:58 ` [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet Madalin Bucur
@ 2015-03-18 16:30 ` Kumar Gala
2015-03-18 16:30 ` Kumar Gala
1 sibling, 0 replies; 15+ messages in thread
From: Kumar Gala @ 2015-03-18 16:30 UTC (permalink / raw)
To: madalin.bucur; +Cc: netdev, linuxppc-dev, linux-kernel
On Mar 17, 2015, at 1:58 PM, Madalin Bucur <madalin.bucur@Freescale.com> wrote:
> This introduces the Freescale Data Path Acceleration Architecture
> (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
> BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
> the Freescale DPAA QorIQ platforms.
>
> Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
> ---
> drivers/net/ethernet/freescale/Kconfig | 2 +
> drivers/net/ethernet/freescale/Makefile | 1 +
> drivers/net/ethernet/freescale/dpaa/Kconfig | 49 +
> drivers/net/ethernet/freescale/dpaa/Makefile | 14 +
> drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 837 +++++++++++++
> drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 446 +++++++
> .../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1288 ++++++++++++++++++++
> .../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 119 ++
> drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 428 +++++++
> 9 files changed, 3184 insertions(+)
> create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig
> create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
>
> diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
> index ba84c4a..dd485f1 100644
> --- a/drivers/net/ethernet/freescale/Kconfig
> +++ b/drivers/net/ethernet/freescale/Kconfig
> @@ -95,4 +95,6 @@ config GIANFAR
> This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
> and MPC86xx family of chips, and the FEC on the 8540.
>
> +source "drivers/net/ethernet/freescale/dpaa/Kconfig"
> +
> endif # NET_VENDOR_FREESCALE
> diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
> index 71debd1..b6c10ab 100644
> --- a/drivers/net/ethernet/freescale/Makefile
> +++ b/drivers/net/ethernet/freescale/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/
> obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
> obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
> obj-$(CONFIG_GIANFAR) += gianfar_driver.o
> +obj-$(if $(CONFIG_FSL_DPAA_ETH),y) += dpaa/
Why isn’t
obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
enough?
> obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
> gianfar_driver-objs := gianfar.o \
> gianfar_ethtool.o
> diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
> new file mode 100644
> index 0000000..7ef703c
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
> @@ -0,0 +1,49 @@
> +menuconfig FSL_DPAA_ETH
> + tristate "DPAA Ethernet"
> + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
> + select PHYLIB
> + select FSL_FMAN_MAC
> + ---help---
> + Data Path Acceleration Architecture Ethernet driver,
> + supporting the Freescale QorIQ chips.
> + Depends on Freescale Buffer Manager and Queue Manager
> + driver and Frame Manager Driver.
> +
> +if FSL_DPAA_ETH
> +
> +config FSL_DPAA_CS_THRESHOLD_1G
> + hex "Egress congestion threshold on 1G ports"
> + depends on FSL_DPAA_ETH
> + range 0x1000 0x10000000
> + default "0x06000000"
> + ---help---
> + The size in bytes of the egress Congestion State notification threshold on 1G ports.
> + The 1G dTSECs can quite easily be flooded by cores doing Tx in a tight loop
> + (e.g. by sending UDP datagrams at "while(1) speed"),
> + and the larger the frame size, the more acute the problem.
> + So we have to find a balance between these factors:
> + - avoiding the device staying congested for a prolonged time (risking
> + the netdev watchdog to fire - see also the tx_timeout module param);
> + - affecting performance of protocols such as TCP, which otherwise
> + behave well under the congestion notification mechanism;
> + - preventing the Tx cores from tightly-looping (as if the congestion
> + threshold was too low to be effective);
> + - running out of memory if the CS threshold is set too high.
> +
> +config FSL_DPAA_CS_THRESHOLD_10G
> + hex "Egress congestion threshold on 10G ports"
> + depends on FSL_DPAA_ETH
> + range 0x1000 0x20000000
> + default "0x10000000"
> + ---help ---
> + The size in bytes of the egress Congestion State notification threshold on 10G ports.
> +
> +config FSL_DPAA_INGRESS_CS_THRESHOLD
> + hex "Ingress congestion threshold on FMan ports"
> + depends on FSL_DPAA_ETH
> + default "0x10000000"
> + ---help---
> + The size in bytes of the ingress tail-drop threshold on FMan ports.
> + Traffic piling up above this value will be rejected by QMan and discarded by FMan.
> +
Do these thresholds really need to be kconfig options? Are they not changeable at runtime?
> +endif # FSL_DPAA_ETH
> diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
> new file mode 100644
> index 0000000..bdeb04e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/Makefile
> @@ -0,0 +1,14 @@
> +#
> +# Makefile for the Freescale DPAA Ethernet controllers
> +#
> +ccflags-y += -DVERSION=\”\"
Is this really needed, if so we need to fix that.
> +#
> +# Include FMan headers
> +FMAN = $(srctree)/drivers/soc/fsl/fman
> +ccflags-y += -I$(FMAN)
> +ccflags-y += -I$(FMAN)/inc
> +ccflags-y += -I$(FMAN)/flib
> +
> +obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
> +
> +fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> new file mode 100644
> index 0000000..96a7cee
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> @@ -0,0 +1,837 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#define pr_fmt(fmt) \
> + KBUILD_MODNAME ": " fmt
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_mdio.h>
> +#include <linux/of_net.h>
> +#include <linux/kthread.h>
> +#include <linux/io.h>
> +#include <linux/if_arp.h> /* arp_hdr_len() */
> +#include <linux/if_vlan.h> /* VLAN_HLEN */
> +#include <linux/icmp.h> /* struct icmphdr */
> +#include <linux/ip.h> /* struct iphdr */
> +#include <linux/ipv6.h> /* struct ipv6hdr */
> +#include <linux/udp.h> /* struct udphdr */
> +#include <linux/tcp.h> /* struct tcphdr */
> +#include <linux/net.h> /* net_ratelimit() */
> +#include <linux/if_ether.h> /* ETH_P_IP and ETH_P_IPV6 */
> +#include <linux/highmem.h>
> +#include <linux/percpu.h>
> +#include <linux/dma-mapping.h>
> +#include <soc/fsl/bman.h>
> +
> +#include "fsl_fman.h"
> +#include "fm_ext.h"
> +#include "fm_port_ext.h"
> +
> +#include "mac.h"
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +
> +#define DPA_NAPI_WEIGHT 64
> +
> +/* Valid checksum indication */
> +#define DPA_CSUM_VALID 0xFFFF
> +
> +#define DPA_DESCRIPTION "FSL DPAA Ethernet driver"
> +
> +MODULE_LICENSE("Dual BSD/GPL");
> +
> +MODULE_AUTHOR("Andy Fleming <afleming@freescale.com>");
> +
> +MODULE_DESCRIPTION(DPA_DESCRIPTION);
These are typically at the end of the file, and kept together (ie no blank lines between them)
> +
> +static u8 debug = -1;
> +module_param(debug, byte, S_IRUGO);
> +MODULE_PARM_DESC(debug, "Module/Driver verbosity level");
> +
> +/* This has to work in tandem with the DPA_CS_THRESHOLD_xxx values. */
> +static u16 tx_timeout = 1000;
> +module_param(tx_timeout, ushort, S_IRUGO);
> +MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
> +
>
[snip]
> +
> +static struct platform_device_id dpa_devtype[] = {
> + {
> + .name = "dpaa-ethernet",
> + .driver_data = 0,
> + }, {
> + }
> +};
> +MODULE_DEVICE_TABLE(platform, dpa_devtype);
> +
> +static struct platform_driver dpa_driver = {
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .owner = THIS_MODULE,
> + },
> + .id_table = dpa_devtype,
> + .probe = dpaa_eth_priv_probe,
> + .remove = dpa_remove
> +};
> +
> +static int __init __cold dpa_load(void)
> +{
> + int _errno;
> +
> + pr_info(DPA_DESCRIPTION " (" VERSION ")\n");
> +
> + /* initialise dpaa_eth mirror values */
> + dpa_rx_extra_headroom = fm_get_rx_extra_headroom();
> + dpa_max_frm = fm_get_max_frm();
> +
> + _errno = platform_driver_register(&dpa_driver);
> + if (unlikely(_errno < 0)) {
> + pr_err(KBUILD_MODNAME
> + ": %s:%hu:%s(): platform_driver_register() = %d\n",
> + KBUILD_BASENAME ".c", __LINE__, __func__, _errno);
> + }
> +
> + pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
> + KBUILD_BASENAME ".c", __func__);
> +
> + return _errno;
> +}
> +module_init(dpa_load);
> +
> +static void __exit __cold dpa_unload(void)
> +{
> + pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
> + KBUILD_BASENAME ".c", __func__);
> +
> + platform_driver_unregister(&dpa_driver);
> +
> + /* Only one channel is used and needs to be relased after all
> + * interfaces are removed
> + */
> + dpa_release_channel();
> +
> + pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
> + KBUILD_BASENAME ".c", __func__);
> +}
> +module_exit(dpa_unload);
What’s the point of this dpa platform driver?
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> new file mode 100644
> index 0000000..793491f
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> @@ -0,0 +1,446 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef __DPA_H
> +#define __DPA_H
> +
> +#include <linux/netdevice.h>
> +#include <soc/fsl/qman.h> /* struct qman_fq */
> +
> +#include "fm_ext.h"
> +
> +extern int dpa_rx_extra_headroom;
> +extern int dpa_max_frm;
> +
> +#define dpa_get_rx_extra_headroom() dpa_rx_extra_headroom
> +#define dpa_get_max_frm() dpa_max_frm
> +
> +#define dpa_get_max_mtu() \
> + (dpa_get_max_frm() - (VLAN_ETH_HLEN + ETH_FCS_LEN))
> +
> +#define __hot
> +
> +/* Simple enum of FQ types - used for array indexing */
> +enum port_type {RX, TX};
> +
> +struct dpa_buffer_layout_s {
> + u16 priv_data_size;
> + bool parse_results;
> + bool time_stamp;
> + bool hash_results;
> + u16 data_align;
> +};
> +
> +#define DPA_ERR_ON(cond)
> +
> +#define DPA_TX_PRIV_DATA_SIZE 16
> +#define DPA_PARSE_RESULTS_SIZE sizeof(fm_prs_result)
> +#define DPA_TIME_STAMP_SIZE 8
> +#define DPA_HASH_RESULTS_SIZE 8
> +#define DPA_RX_PRIV_DATA_SIZE (DPA_TX_PRIV_DATA_SIZE + \
> + dpa_get_rx_extra_headroom())
> +
> +#define FM_FD_STAT_RX_ERRORS \
> + (FM_PORT_FRM_ERR_DMA | FM_PORT_FRM_ERR_PHYSICAL | \
> + FM_PORT_FRM_ERR_SIZE | FM_PORT_FRM_ERR_CLS_DISCARD | \
> + FM_PORT_FRM_ERR_EXTRACTION | FM_PORT_FRM_ERR_NO_SCHEME | \
> + FM_PORT_FRM_ERR_PRS_TIMEOUT | FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \
> + FM_PORT_FRM_ERR_PRS_HDR_ERR)
> +
> +#define FM_FD_STAT_TX_ERRORS \
> + (FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT | \
> + FM_PORT_FRM_ERR_LENGTH | FM_PORT_FRM_ERR_DMA)
> +
> +/* The raw buffer size must be cacheline aligned.
> + * Normally we use 2K buffers.
> + */
> +#define DPA_BP_RAW_SIZE 2048
> +
> +/* This is what FMan is ever allowed to use.
> + * FMan-DMA requires 16-byte alignment for Rx buffers, but SKB_DATA_ALIGN is
> + * even stronger (SMP_CACHE_BYTES-aligned), so we just get away with that,
> + * via SKB_WITH_OVERHEAD(). We can't rely on netdev_alloc_frag() giving us
> + * half-page-aligned buffers (can we?), so we reserve some more space
> + * for start-of-buffer alignment.
> + */
> +#define dpa_bp_size(buffer_layout) (SKB_WITH_OVERHEAD(DPA_BP_RAW_SIZE) - \
> + SMP_CACHE_BYTES)
> +/* We must ensure that skb_shinfo is always cacheline-aligned. */
> +#define DPA_SKB_SIZE(size) ((size) & ~(SMP_CACHE_BYTES - 1))
> +
> +/* Largest value that the FQD's OAL field can hold.
> + * This is DPAA-1.x specific.
> + */
> +#define FSL_QMAN_MAX_OAL 127
> +
> +/* Default alignment for start of data in an Rx FD */
> +#define DPA_FD_DATA_ALIGNMENT 16
> +
> +/* Values for the L3R field of the FM Parse Results
> + */
> +/* L3 Type field: First IP Present IPv4 */
> +#define FM_L3_PARSE_RESULT_IPV4 0x8000
> +/* L3 Type field: First IP Present IPv6 */
> +#define FM_L3_PARSE_RESULT_IPV6 0x4000
> +
> +/* Values for the L4R field of the FM Parse Results
> + * See $8.8.4.7.20 - L4 HXS - L4 Results from DPAA-Rev2 Reference Manual.
> + */
> +/* L4 Type field: UDP */
> +#define FM_L4_PARSE_RESULT_UDP 0x40
> +/* L4 Type field: TCP */
> +#define FM_L4_PARSE_RESULT_TCP 0x20
> +
> +#define FM_FD_STAT_ERR_PHYSICAL FM_PORT_FRM_ERR_PHYSICAL
> +
> +/* number of Tx queues to FMan */
> +#define DPAA_ETH_TX_QUEUES NR_CPUS
> +
> +#define DPAA_ETH_RX_QUEUES 128
> +
> +#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
> +#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
> +
> +/* More detailed FQ types - used for fine-grained WQ assignments */
> +enum dpa_fq_type {
> + FQ_TYPE_RX_DEFAULT = 1, /* Rx Default FQs */
> + FQ_TYPE_RX_ERROR, /* Rx Error FQs */
> + FQ_TYPE_RX_PCD, /* User-defined PCDs */
> + FQ_TYPE_TX, /* "Real" Tx FQs */
> + FQ_TYPE_TX_CONFIRM, /* Tx default Conf FQ (actually an Rx FQ) */
> + FQ_TYPE_TX_CONF_MQ, /* Tx conf FQs (one for each Tx FQ) */
> + FQ_TYPE_TX_ERROR, /* Tx Error FQs (these are actually Rx FQs) */
> +};
> +
> +struct dpa_fq {
> + struct qman_fq fq_base;
> + struct list_head list;
> + struct net_device *net_dev;
> + bool init;
> + u32 fqid;
> + u32 flags;
> + u16 channel;
> + u8 wq;
> + enum dpa_fq_type fq_type;
> +};
> +
> +struct dpa_fq_cbs_t {
> + struct qman_fq rx_defq;
> + struct qman_fq tx_defq;
> + struct qman_fq rx_errq;
> + struct qman_fq tx_errq;
> + struct qman_fq egress_ern;
> +};
> +
> +struct fqid_cell {
> + u32 start;
> + u32 count;
> +};
> +
> +struct dpa_bp {
> + struct bman_pool *pool;
> + u8 bpid;
> + struct device *dev;
> + union {
> + /* The buffer pools used for the private ports are initialized
> + * with target_count buffers for each CPU; at runtime the
> + * number of buffers per CPU is constantly brought back to this
> + * level
> + */
> + int target_count;
> + /* The configured value for the number of buffers in the pool,
> + * used for shared port buffer pools
> + */
> + int config_count;
> + };
> + size_t size;
> + bool seed_pool;
> + /* physical address of the contiguous memory used by the pool to store
> + * the buffers
> + */
> + dma_addr_t paddr;
> + /* virtual address of the contiguous memory used by the pool to store
> + * the buffers
> + */
> + void __iomem *vaddr;
> + /* current number of buffers in the bpool alloted to this CPU */
> + int __percpu *percpu_count;
> + atomic_t refs;
> + /* some bpools need to be seeded before use by this cb */
> + int (*seed_cb)(struct dpa_bp *);
> + /* some bpools need to be emptied before freeing; this cb is used
> + * for freeing of individual buffers taken from the pool
> + */
> + void (*free_buf_cb)(void *addr);
> +};
> +
> +struct dpa_napi_portal {
> + struct napi_struct napi;
> + struct qman_portal *p;
> +};
> +
> +struct dpa_percpu_priv_s {
> + struct net_device *net_dev;
> + struct dpa_napi_portal *np;
> + struct rtnl_link_stats64 stats;
> +};
> +
> +struct dpa_priv_s {
> + struct dpa_percpu_priv_s __percpu *percpu_priv;
> + struct dpa_bp *dpa_bp;
> + /* Store here the needed Tx headroom for convenience and speed
> + * (even though it can be computed based on the fields of buf_layout)
> + */
> + u16 tx_headroom;
> + struct net_device *net_dev;
> + struct mac_device *mac_dev;
> + struct qman_fq *egress_fqs[DPAA_ETH_TX_QUEUES];
> + struct qman_fq *conf_fqs[DPAA_ETH_TX_QUEUES];
> +
> + size_t bp_count;
> +
> + u16 channel; /* "fsl,qman-channel-id" */
> + struct list_head dpa_fq_list;
> +
> + u32 msg_enable; /* net_device message level */
> +
> + struct {
> + /**
> + * All egress queues to a given net device belong to one
> + * (and the same) congestion group.
> + */
> + struct qman_cgr cgr;
> + } cgr_data;
> + /* Use a per-port CGR for ingress traffic. */
> + bool use_ingress_cgr;
> + struct qman_cgr ingress_cgr;
> +
> + struct dpa_buffer_layout_s *buf_layout;
> + u16 rx_headroom;
> +};
> +
> +struct fm_port_fqs {
> + struct dpa_fq *tx_defq;
> + struct dpa_fq *tx_errq;
> + struct dpa_fq *rx_defq;
> + struct dpa_fq *rx_errq;
> +};
> +
> +int dpa_bp_priv_seed(struct dpa_bp *dpa_bp);
> +int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *count_ptr);
> +void __hot _dpa_rx(struct net_device *net_dev,
> + struct qman_portal *portal,
> + const struct dpa_priv_s *priv,
> + struct dpa_percpu_priv_s *percpu_priv,
> + const struct qm_fd *fd,
> + u32 fqid,
> + int *count_ptr);
> +int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev);
> +struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
> + const struct qm_fd *fd);
> +
> +/* Turn on HW checksum computation for this outgoing frame.
> + * If the current protocol is not something we support in this regard
> + * (or if the stack has already computed the SW checksum), we do nothing.
> + *
> + * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
> + * otherwise.
> + *
> + * Note that this function may modify the fd->cmd field and the skb data buffer
> + * (the Parse Results area).
> + */
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv, struct sk_buff *skb,
> + struct qm_fd *fd, char *parse_results);
> +
> +static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv_s *percpu_priv,
> + struct qman_portal *portal)
> +{
> + /* In case of threaded ISR for RT enable kernel,
> + * in_irq() does not return appropriate value, so use
> + * in_serving_softirq to distinguish softirq or irq context.
> + */
> + if (unlikely(in_irq() || !in_serving_softirq())) {
> + /* Disable QMan IRQ and invoke NAPI */
> + int ret = qman_p_irqsource_remove(portal, QM_PIRQ_DQRI);
> +
> + if (likely(!ret)) {
> + const struct qman_portal_config *pc =
> + qman_p_get_portal_config(portal);
> + struct dpa_napi_portal *np =
> + &percpu_priv->np[pc->channel];
> +
> + np->p = portal;
> + napi_schedule(&np->napi);
> + return 1;
> + }
> + }
> + return 0;
> +}
> +
> +static inline ssize_t __const __must_check __attribute__((nonnull))
> +dpa_fd_length(const struct qm_fd *fd)
> +{
> + return fd->length20;
> +}
> +
> +static inline ssize_t __const __must_check __attribute__((nonnull))
> +dpa_fd_offset(const struct qm_fd *fd)
> +{
> + return fd->offset;
> +}
> +
> +/* Verifies if the skb length is below the interface MTU */
> +static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
> +{
> + if (unlikely(skb->len > mtu))
> + if ((skb->protocol != ETH_P_8021Q) || (skb->len > mtu + 4))
> + return -1;
> +
> + return 0;
> +}
> +
> +static inline u16 dpa_get_headroom(struct dpa_buffer_layout_s *bl)
> +{
> + u16 headroom;
> + /* The frame headroom must accommodate:
> + * - the driver private data area
> + * - parse results, hash results, timestamp if selected
> + * If either hash results or time stamp are selected, both will
> + * be copied to/from the frame headroom, as TS is located between PR and
> + * HR in the IC and IC copy size has a granularity of 16bytes
> + * (see description of FMBM_RICP and FMBM_TICP registers in DPAARM)
> + *
> + * Also make sure the headroom is a multiple of data_align bytes
> + */
> + headroom = (u16)(bl->priv_data_size +
> + (bl->parse_results ? DPA_PARSE_RESULTS_SIZE : 0) +
> + (bl->hash_results || bl->time_stamp ?
> + DPA_TIME_STAMP_SIZE + DPA_HASH_RESULTS_SIZE : 0));
> +
> + return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
> +}
> +
> +
> +void dpa_private_napi_del(struct net_device *net_dev);
> +
> +static inline void clear_fd(struct qm_fd *fd)
> +{
> + fd->opaque_addr = 0;
> + fd->opaque = 0;
> + fd->cmd = 0;
> +}
> +
> +static inline struct qman_fq *_dpa_get_tx_conf_queue(
> + const struct dpa_priv_s *priv,
> + struct qman_fq *tx_fq)
> +{
> + int i;
> +
> + for (i = 0; i < DPAA_ETH_TX_QUEUES; i++)
> + if (priv->egress_fqs[i] == tx_fq)
> + return priv->conf_fqs[i];
> +
> + return NULL;
> +}
> +
> +static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
> + struct rtnl_link_stats64 *percpu_stats,
> + int queue,
> + struct qm_fd *fd)
Is there a reason this isnt just in the .c file?
> +{
> + int err, i;
> + struct qman_fq *egress_fq;
> +
> + egress_fq = priv->egress_fqs[queue];
> + if (fd->bpid == 0xff)
> + fd->cmd |= qman_fq_fqid(
> + _dpa_get_tx_conf_queue(priv, egress_fq)
> + );
> +
> + for (i = 0; i < 100000; i++) {
> + err = qman_enqueue(egress_fq, fd, 0);
> + if (err != -EBUSY)
> + break;
> + }
> +
> + if (unlikely(err < 0)) {
> + percpu_stats->tx_errors++;
> + percpu_stats->tx_fifo_errors++;
> + return err;
> + }
> +
> + percpu_stats->tx_packets++;
> + percpu_stats->tx_bytes += dpa_fd_length(fd);
> +
> + return 0;
> +}
> +
> +/* Use multiple WQs for FQ assignment:
> + * - Tx Confirmation queues go to WQ1.
> + * - Rx Default and Tx queues go to WQ3 (no differentiation between
> + * Rx and Tx traffic).
> + * - Rx Error and Tx Error queues go to WQ2 (giving them a better chance
> + * to be scheduled, in case there are many more FQs in WQ3).
> + * This ensures that Tx-confirmed buffers are timely released. In particular,
> + * it avoids congestion on the Tx Confirm FQs, which can pile up PFDRs if they
> + * are greatly outnumbered by other FQs in the system, while
> + * dequeue scheduling is round-robin.
> + */
> +static inline void _dpa_assign_wq(struct dpa_fq *fq)
> +{
> + switch (fq->fq_type) {
> + case FQ_TYPE_TX_CONFIRM:
> + case FQ_TYPE_TX_CONF_MQ:
> + fq->wq = 1;
> + break;
> + case FQ_TYPE_RX_DEFAULT:
> + case FQ_TYPE_TX:
> + fq->wq = 3;
> + break;
> + case FQ_TYPE_RX_ERROR:
> + case FQ_TYPE_TX_ERROR:
> + fq->wq = 2;
> + break;
> + default:
> + WARN(1, "Invalid FQ type %d for FQID %d!\n",
> + fq->fq_type, fq->fqid);
> + }
> +}
> +
> +/* Use the queue selected by XPS */
> +#define dpa_get_queue_mapping(skb) \
> + skb_get_queue_mapping(skb)
> +
> +static inline void _dpa_bp_free_pf(void *addr)
> +{
> + put_page(virt_to_head_page(addr));
> +}
> +
> +#endif /* __DPA_H */
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> new file mode 100644
> index 0000000..7094a45
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> @@ -0,0 +1,1288 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_net.h>
> +#include <linux/etherdevice.h>
> +#include <linux/kthread.h>
> +#include <linux/percpu.h>
> +#include <linux/highmem.h>
> +#include <linux/sort.h>
> +#include <soc/fsl/qman.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include <linux/if_vlan.h> /* vlan_eth_hdr */
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +#include "mac.h"
> +
> +/* Size in bytes of the FQ taildrop threshold */
> +#define DPA_FQ_TD 0x200000
> +
> +static struct dpa_bp *dpa_bp_array[64];
> +
> +int dpa_max_frm;
> +EXPORT_SYMBOL(dpa_max_frm);
> +
> +int dpa_rx_extra_headroom;
> +EXPORT_SYMBOL(dpa_rx_extra_headroom);
> +
> +static const struct fqid_cell tx_confirm_fqids[] = {
> + {0, DPAA_ETH_TX_QUEUES}
> +};
> +
> +static const struct fqid_cell default_fqids[][3] = {
> + [RX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_RX_QUEUES} },
> + [TX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_TX_QUEUES} }
> +};
> +
> +int dpa_netdev_init(struct net_device *net_dev,
> + const u8 *mac_addr,
> + u16 tx_timeout)
> +{
> + int err;
> + struct dpa_priv_s *priv = netdev_priv(net_dev);
> + struct device *dev = net_dev->dev.parent;
> +
> + net_dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> +
> + net_dev->features |= net_dev->hw_features;
> + net_dev->vlan_features = net_dev->features;
> +
> + memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
> + memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
> +
> + net_dev->needed_headroom = priv->tx_headroom;
> + net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
> +
> + err = register_netdev(net_dev);
> + if (err < 0) {
> + dev_err(dev, "register_netdev() = %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_netdev_init);
> +
> +int __cold dpa_start(struct net_device *net_dev)
> +{
> + int err, i;
> + struct dpa_priv_s *priv;
> + struct mac_device *mac_dev;
> +
> + priv = netdev_priv(net_dev);
> + mac_dev = priv->mac_dev;
> +
> + err = mac_dev->init_phy(net_dev, priv->mac_dev);
> + if (err < 0) {
> + if (netif_msg_ifup(priv))
> + netdev_err(net_dev, "init_phy() = %d\n", err);
> + return err;
> + }
> +
> + for_each_port_device(i, mac_dev->port_dev) {
> + err = fm_port_enable(mac_dev->port_dev[i]);
> + if (err)
> + goto mac_start_failed;
> + }
> +
> + err = priv->mac_dev->start(mac_dev);
> + if (err < 0) {
> + if (netif_msg_ifup(priv))
> + netdev_err(net_dev, "mac_dev->start() = %d\n", err);
> + goto mac_start_failed;
> + }
> +
> + netif_tx_start_all_queues(net_dev);
> +
> + return 0;
> +
> +mac_start_failed:
> + for_each_port_device(i, mac_dev->port_dev)
> + fm_port_disable(mac_dev->port_dev[i]);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_start);
> +
> +int __cold dpa_stop(struct net_device *net_dev)
> +{
> + int _errno, i, err;
> + struct dpa_priv_s *priv;
> + struct mac_device *mac_dev;
> +
> + priv = netdev_priv(net_dev);
> + mac_dev = priv->mac_dev;
> +
> + netif_tx_stop_all_queues(net_dev);
> + /* Allow the Fman (Tx) port to process in-flight frames before we
> + * try switching it off.
> + */
> + usleep_range(5000, 10000);
> +
> + _errno = mac_dev->stop(mac_dev);
> + if (unlikely(_errno < 0))
> + if (netif_msg_ifdown(priv))
> + netdev_err(net_dev, "mac_dev->stop() = %d\n",
> + _errno);
> +
> + for_each_port_device(i, mac_dev->port_dev) {
> + err = fm_port_disable(mac_dev->port_dev[i]);
> + _errno = err ? err : _errno;
> + }
> +
> + if (mac_dev->phy_dev)
> + phy_disconnect(mac_dev->phy_dev);
> + mac_dev->phy_dev = NULL;
> +
> + return _errno;
> +}
> +EXPORT_SYMBOL(dpa_stop);
> +
> +void __cold dpa_timeout(struct net_device *net_dev)
> +{
> + const struct dpa_priv_s *priv;
> + struct dpa_percpu_priv_s *percpu_priv;
> +
> + priv = netdev_priv(net_dev);
> + percpu_priv = raw_cpu_ptr(priv->percpu_priv);
> +
> + if (netif_msg_timer(priv))
> + netdev_crit(net_dev, "Transmit timeout latency: %u ms\n",
> + jiffies_to_msecs(jiffies - net_dev->trans_start));
> +
> + percpu_priv->stats.tx_errors++;
> +}
> +EXPORT_SYMBOL(dpa_timeout);
> +
> +/* net_device */
> +
> +/**
> + * @param net_dev the device for which statistics are calculated
> + * @param stats the function fills this structure with the device's statistics
> + * @return the address of the structure containing the statistics
> + *
> + * Calculates the statistics for the given device by adding the statistics
> + * collected by each CPU.
> + */
> +struct rtnl_link_stats64 * __cold
> +dpa_get_stats64(struct net_device *net_dev,
> + struct rtnl_link_stats64 *stats)
> +{
> + struct dpa_priv_s *priv = netdev_priv(net_dev);
> + u64 *cpustats;
> + u64 *netstats = (u64 *)stats;
> + int i, j;
> + struct dpa_percpu_priv_s *percpu_priv;
> + int numstats = sizeof(struct rtnl_link_stats64) / sizeof(u64);
> +
> + for_each_possible_cpu(i) {
> + percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
> +
> + cpustats = (u64 *)&percpu_priv->stats;
> +
> + for (j = 0; j < numstats; j++)
> + netstats[j] += cpustats[j];
> + }
> +
> + return stats;
> +}
> +EXPORT_SYMBOL(dpa_get_stats64);
> +
> +int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
> +{
> + const int max_mtu = dpa_get_max_mtu();
> +
> + /* Make sure we don't exceed the Ethernet controller's MAXFRM */
> + if (new_mtu < 68 || new_mtu > max_mtu) {
> + netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
> + new_mtu, 68, max_mtu);
> + return -EINVAL;
> + }
> + net_dev->mtu = new_mtu;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_change_mtu);
> +
> +/* .ndo_init callback */
> +int dpa_ndo_init(struct net_device *net_dev)
> +{
> + /* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
> + * we choose conservatively and let the user explicitly set a higher
> + * MTU via ifconfig. Otherwise, the user may end up with different MTUs
> + * in the same LAN.
> + * If on the other hand fsl_fm_max_frm has been chosen below 1500,
> + * start with the maximum allowed.
> + */
> + int init_mtu = min(dpa_get_max_mtu(), ETH_DATA_LEN);
> +
> + pr_debug("Setting initial MTU on net device: %d\n", init_mtu);
> + net_dev->mtu = init_mtu;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_ndo_init);
> +
> +int dpa_set_features(struct net_device *dev, netdev_features_t features)
> +{
> + /* Not much to do here for now */
> + dev->features = features;
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_set_features);
> +
> +netdev_features_t dpa_fix_features(struct net_device *dev,
> + netdev_features_t features)
> +{
> + netdev_features_t unsupported_features = 0;
> +
> + /* In theory we should never be requested to enable features that
> + * we didn't set in netdev->features and netdev->hw_features at probe
> + * time, but double check just to be on the safe side.
> + * We don't support enabling Rx csum through ethtool yet
> + */
> + unsupported_features |= NETIF_F_RXCSUM;
> +
> + features &= ~unsupported_features;
> +
> + return features;
> +}
> +EXPORT_SYMBOL(dpa_fix_features);
> +
> +int __cold dpa_remove(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev;
> + struct net_device *net_dev;
> + struct dpa_priv_s *priv;
> +
> + dev = &pdev->dev;
> + net_dev = dev_get_drvdata(dev);
> +
> + priv = netdev_priv(net_dev);
> +
> + dev_set_drvdata(dev, NULL);
> + unregister_netdev(net_dev);
> +
> + err = dpa_fq_free(dev, &priv->dpa_fq_list);
> +
> + qman_delete_cgr_safe(&priv->ingress_cgr);
> + qman_release_cgrid(priv->ingress_cgr.cgrid);
> + qman_delete_cgr_safe(&priv->cgr_data.cgr);
> + qman_release_cgrid(priv->cgr_data.cgr.cgrid);
> +
> + dpa_private_napi_del(net_dev);
> +
> + dpa_bp_free(priv);
> +
> + if (priv->buf_layout)
> + devm_kfree(dev, priv->buf_layout);
> +
> + free_netdev(net_dev);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_remove);
> +
> +struct mac_device * __cold __must_check
> +__attribute__((nonnull))
> +dpa_mac_dev_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev, *dev;
> + struct device_node *mac_node;
> + struct platform_device *of_dev;
> + struct mac_device *mac_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev = &pdev->dev;
> + eth_data = dpa_dev->platform_data;
> + if (!eth_data)
> + return ERR_PTR(-ENODEV);
> +
> + mac_node = eth_data->mac_node;
> +
> + of_dev = of_find_device_by_node(mac_node);
> + if (unlikely(!of_dev)) {
> + dev_err(dpa_dev, "of_find_device_by_node(%s) failed\n",
> + mac_node->full_name);
> + of_node_put(mac_node);
> + return ERR_PTR(-EINVAL);
> + }
> + of_node_put(mac_node);
> +
> + dev = &of_dev->dev;
> +
> + mac_dev = dev_get_drvdata(dev);
> + if (unlikely(!mac_dev)) {
> + dev_err(dpa_dev, "dev_get_drvdata(%s) failed\n",
> + dev_name(dev));
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return mac_dev;
> +}
> +EXPORT_SYMBOL(dpa_mac_dev_get);
why is this exported?
> +
> +int dpa_mac_hw_index_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev = &pdev->dev;
> + eth_data = dpa_dev->platform_data;
> +
> + return eth_data->mac_hw_id;
> +}
> +
> +int dpa_mac_fman_index_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev = &pdev->dev;
> + eth_data = dpa_dev->platform_data;
> +
> + return eth_data->fman_hw_id;
> +}
> +
> +int dpa_set_mac_address(struct net_device *net_dev, void *addr)
> +{
> + const struct dpa_priv_s *priv;
> + int _errno;
> + struct mac_device *mac_dev;
> +
> + priv = netdev_priv(net_dev);
> +
> + _errno = eth_mac_addr(net_dev, addr);
> + if (_errno < 0) {
> + if (netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "eth_mac_addr() = %d\n",
> + _errno);
> + return _errno;
> + }
> +
> + mac_dev = priv->mac_dev;
> +
> + _errno = mac_dev->change_addr(mac_dev->get_mac_handle(mac_dev),
> + (enet_addr_t *)net_dev->dev_addr);
> + if (_errno < 0) {
> + if (netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "mac_dev->change_addr() = %d\n",
> + _errno);
> + return _errno;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_set_mac_address);
> +
> +void dpa_set_rx_mode(struct net_device *net_dev)
> +{
> + int _errno;
> + const struct dpa_priv_s *priv;
> +
> + priv = netdev_priv(net_dev);
> +
> + if (!!(net_dev->flags & IFF_PROMISC) != priv->mac_dev->promisc) {
> + priv->mac_dev->promisc = !priv->mac_dev->promisc;
> + _errno = priv->mac_dev->set_promisc(
> + priv->mac_dev->get_mac_handle(priv->mac_dev),
> + priv->mac_dev->promisc);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "mac_dev->set_promisc() = %d\n",
> + _errno);
> + }
> +
> + _errno = priv->mac_dev->set_multi(net_dev, priv->mac_dev);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + netdev_err(net_dev, "mac_dev->set_multi() = %d\n", _errno);
> +}
> +EXPORT_SYMBOL(dpa_set_rx_mode);
> +
> +void dpa_set_buffers_layout(struct mac_device *mac_dev,
> + struct dpa_buffer_layout_s *layout)
> +{
> + struct fm_port_params params;
> +
> + /* Rx */
> + layout[RX].priv_data_size = (u16)DPA_RX_PRIV_DATA_SIZE;
> + layout[RX].parse_results = true;
> + layout[RX].hash_results = true;
> +
> + fm_port_get_buff_layout_ext_params(mac_dev->port_dev[RX], ¶ms);
> + /* a value of zero for data alignment means "don't care", so align to
> + * a non-zero value to prevent FMD from using its own default
> + */
> + layout[RX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
> +
> + /* Tx */
> + layout[TX].priv_data_size = DPA_TX_PRIV_DATA_SIZE;
> + layout[TX].parse_results = true;
> + layout[TX].hash_results = true;
> +
> + fm_port_get_buff_layout_ext_params(mac_dev->port_dev[TX], ¶ms);
> + layout[TX].data_align = params.data_align ? : DPA_FD_DATA_ALIGNMENT;
> +}
> +EXPORT_SYMBOL(dpa_set_buffers_layout);
> +
> +int __attribute__((nonnull))
> +dpa_bp_alloc(struct dpa_bp *dpa_bp)
> +{
> + int err;
> + struct bman_pool_params bp_params;
> + struct platform_device *pdev;
> +
> + if (dpa_bp->size == 0 || dpa_bp->config_count == 0) {
> + pr_err("Buffer pool is not properly initialized! Missing size or initial number of buffers");
> + return -EINVAL;
> + }
> +
> + memset(&bp_params, 0, sizeof(struct bman_pool_params));
> +
> + /* If the pool is already specified, we only create one per bpid */
> + if (dpa_bpid2pool_use(dpa_bp->bpid))
> + return 0;
> +
> + if (dpa_bp->bpid == 0)
> + bp_params.flags |= BMAN_POOL_FLAG_DYNAMIC_BPID;
> + else
> + bp_params.bpid = dpa_bp->bpid;
> +
> + dpa_bp->pool = bman_new_pool(&bp_params);
> + if (unlikely(!dpa_bp->pool)) {
> + pr_err("bman_new_pool() failed\n");
> + return -ENODEV;
> + }
> +
> + dpa_bp->bpid = (u8)bman_get_params(dpa_bp->pool)->bpid;
> +
> + pdev = platform_device_register_simple("DPAA_bpool",
> + dpa_bp->bpid, NULL, 0);
> + if (IS_ERR(pdev)) {
> + err = PTR_ERR(pdev);
> + goto pdev_register_failed;
> + }
> +
> + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(40));
> + if (err)
> + goto pdev_mask_failed;
> +
> + dpa_bp->dev = &pdev->dev;
> +
> + if (dpa_bp->seed_cb) {
> + err = dpa_bp->seed_cb(dpa_bp);
> + if (err)
> + goto pool_seed_failed;
> + }
> +
> + dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
> +
> + return 0;
> +
> +pool_seed_failed:
> +pdev_mask_failed:
> + platform_device_unregister(pdev);
> +pdev_register_failed:
> + bman_free_pool(dpa_bp->pool);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_bp_alloc);
> +
> +void dpa_bp_drain(struct dpa_bp *bp)
> +{
> + int ret;
> + u8 num = 8;
> +
> + do {
> + struct bm_buffer bmb[8];
> + int i;
> +
> + ret = bman_acquire(bp->pool, bmb, num, 0);
> + if (ret < 0) {
> + if (num == 8) {
> + /* we have less than 8 buffers left;
> + * drain them one by one
> + */
> + num = 1;
> + ret = 1;
> + continue;
> + } else {
> + /* Pool is fully drained */
> + break;
> + }
> + }
> +
> + for (i = 0; i < num; i++) {
> + dma_addr_t addr = bm_buf_addr(&bmb[i]);
> +
> + dma_unmap_single(bp->dev, addr, bp->size,
> + DMA_BIDIRECTIONAL);
> +
> + bp->free_buf_cb(phys_to_virt(addr));
> + }
> + } while (ret > 0);
> +}
> +
> +static void __cold __attribute__((nonnull))
> +_dpa_bp_free(struct dpa_bp *dpa_bp)
> +{
> + struct dpa_bp *bp = dpa_bpid2pool(dpa_bp->bpid);
> +
> + /* the mapping between bpid and dpa_bp is done very late in the
> + * allocation procedure; if something failed before the mapping, the bp
> + * was not configured, therefore we don't need the below instructions
> + */
> + if (!bp)
> + return;
> +
> + if (!atomic_dec_and_test(&bp->refs))
> + return;
> +
> + if (bp->free_buf_cb)
> + dpa_bp_drain(bp);
> +
> + dpa_bp_array[bp->bpid] = NULL;
> + bman_free_pool(bp->pool);
> +
> + if (bp->dev)
> + platform_device_unregister(to_platform_device(bp->dev));
> +}
> +
> +void __cold __attribute__((nonnull))
> +dpa_bp_free(struct dpa_priv_s *priv)
> +{
> + int i;
> +
> + for (i = 0; i < priv->bp_count; i++)
> + _dpa_bp_free(&priv->dpa_bp[i]);
> +}
> +EXPORT_SYMBOL(dpa_bp_free);
> +
> +struct dpa_bp *dpa_bpid2pool(int bpid)
> +{
> + return dpa_bp_array[bpid];
> +}
> +EXPORT_SYMBOL(dpa_bpid2pool);
> +
> +void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp)
> +{
> + dpa_bp_array[bpid] = dpa_bp;
> + atomic_set(&dpa_bp->refs, 1);
> +}
> +
> +bool dpa_bpid2pool_use(int bpid)
> +{
> + if (dpa_bpid2pool(bpid)) {
> + atomic_inc(&dpa_bp_array[bpid]->refs);
> + return true;
> + }
> +
> + return false;
> +}
> +
> +struct dpa_fq *dpa_fq_alloc(struct device *dev,
> + const struct fqid_cell *fqids,
> + struct list_head *list,
> + enum dpa_fq_type fq_type)
> +{
> + int i;
> + struct dpa_fq *dpa_fq;
> +
> + dpa_fq = devm_kzalloc(dev, sizeof(*dpa_fq) * fqids->count, GFP_KERNEL);
> + if (!dpa_fq)
> + return NULL;
> +
> + for (i = 0; i < fqids->count; i++) {
> + dpa_fq[i].fq_type = fq_type;
> + dpa_fq[i].fqid = fqids->start ? fqids->start + i : 0;
> + list_add_tail(&dpa_fq[i].list, list);
> + }
> +
> + for (i = 0; i < fqids->count; i++)
> + _dpa_assign_wq(dpa_fq + i);
> +
> + return dpa_fq;
> +}
> +EXPORT_SYMBOL(dpa_fq_alloc);
> +
> +int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
> + struct fm_port_fqs *port_fqs,
> + bool alloc_tx_conf_fqs,
> + enum port_type ptype)
> +{
> + const struct fqid_cell *fqids;
> + struct dpa_fq *dpa_fq;
> + int num_ranges;
> + int i;
> +
> + if (ptype == TX && alloc_tx_conf_fqs) {
> + if (!dpa_fq_alloc(dev, tx_confirm_fqids, list,
> + FQ_TYPE_TX_CONF_MQ))
> + goto fq_alloc_failed;
> + }
> +
> + fqids = default_fqids[ptype];
> + num_ranges = 3;
> +
> + for (i = 0; i < num_ranges; i++) {
> + switch (i) {
> + case 0:
> + /* The first queue is the error queue */
> + if (fqids[i].count != 1)
> + goto invalid_error_queue;
> +
> + dpa_fq = dpa_fq_alloc(dev, &fqids[i], list,
> + ptype == RX ?
> + FQ_TYPE_RX_ERROR :
> + FQ_TYPE_TX_ERROR);
> + if (!dpa_fq)
> + goto fq_alloc_failed;
> +
> + if (ptype == RX)
> + port_fqs->rx_errq = &dpa_fq[0];
> + else
> + port_fqs->tx_errq = &dpa_fq[0];
> + break;
> + case 1:
> + /* the second queue is the default queue */
> + if (fqids[i].count != 1)
> + goto invalid_default_queue;
> +
> + dpa_fq = dpa_fq_alloc(dev, &fqids[i], list,
> + ptype == RX ?
> + FQ_TYPE_RX_DEFAULT :
> + FQ_TYPE_TX_CONFIRM);
> + if (!dpa_fq)
> + goto fq_alloc_failed;
> +
> + if (ptype == RX)
> + port_fqs->rx_defq = &dpa_fq[0];
> + else
> + port_fqs->tx_defq = &dpa_fq[0];
> + break;
> + default:
> + /* all subsequent queues are Tx */
> + if (!dpa_fq_alloc(dev, &fqids[i], list, FQ_TYPE_TX))
> + goto fq_alloc_failed;
> + break;
> + }
> + }
> +
> + return 0;
> +
> +fq_alloc_failed:
> + dev_err(dev, "dpa_fq_alloc() failed\n");
> + return -ENOMEM;
> +
> +invalid_default_queue:
> +invalid_error_queue:
> + dev_err(dev, "Too many default or error queues\n");
> + return -EINVAL;
> +}
> +EXPORT_SYMBOL(dpa_fq_probe_mac);
> +
> +static u32 rx_pool_channel;
> +static DEFINE_SPINLOCK(rx_pool_channel_init);
> +
> +int dpa_get_channel(void)
> +{
> + spin_lock(&rx_pool_channel_init);
> + if (!rx_pool_channel) {
> + u32 pool;
> + int ret = qman_alloc_pool(&pool);
> +
> + if (!ret)
> + rx_pool_channel = pool;
> + }
> + spin_unlock(&rx_pool_channel_init);
> + if (!rx_pool_channel)
> + return -ENOMEM;
> + return rx_pool_channel;
> +}
> +EXPORT_SYMBOL(dpa_get_channel);
> +
> +void dpa_release_channel(void)
> +{
> + qman_release_pool(rx_pool_channel);
> +}
> +EXPORT_SYMBOL(dpa_release_channel);
> +
> +int dpaa_eth_add_channel(void *__arg)
> +{
> + const cpumask_t *cpus = qman_affine_cpus();
> + u32 pool = QM_SDQCR_CHANNELS_POOL_CONV((u16)(unsigned long)__arg);
> + int cpu;
> + struct qman_portal *portal;
> +
> + for_each_cpu(cpu, cpus) {
> + portal = (struct qman_portal *)qman_get_affine_portal(cpu);
> + qman_p_static_dequeue_add(portal, pool);
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(dpaa_eth_add_channel);
> +
> +/**
> + * Congestion group state change notification callback.
> + * Stops the device's egress queues while they are congested and
> + * wakes them upon exiting congested state.
> + * Also updates some CGR-related stats.
> + */
> +static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
> + int congested)
> +{
> + struct dpa_priv_s *priv = (struct dpa_priv_s *)container_of(cgr,
> + struct dpa_priv_s, cgr_data.cgr);
> +
> + if (congested)
> + netif_tx_stop_all_queues(priv->net_dev);
> + else
> + netif_tx_wake_all_queues(priv->net_dev);
> +}
> +
> +int dpaa_eth_cgr_init(struct dpa_priv_s *priv)
> +{
> + struct qm_mcc_initcgr initcgr;
> + u32 cs_th;
> + int err;
> +
> + err = qman_alloc_cgrid(&priv->cgr_data.cgr.cgrid);
> + if (err < 0) {
> + pr_err("Error %d allocating CGR ID\n", err);
> + goto out_error;
> + }
> + priv->cgr_data.cgr.cb = dpaa_eth_cgscn;
> +
> + /* Enable Congestion State Change Notifications and CS taildrop */
> + initcgr.we_mask = QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES;
> + initcgr.cgr.cscn_en = QM_CGR_EN;
> +
> + /* Set different thresholds based on the MAC speed.
> + * This may turn suboptimal if the MAC is reconfigured at a speed
> + * lower than its max, e.g. if a dTSEC later negotiates a 100Mbps link.
> + * In such cases, we ought to reconfigure the threshold, too.
> + */
> + if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
> + cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
> + else
> + cs_th = CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
> + qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
> +
> + initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
> + initcgr.cgr.cstd_en = QM_CGR_EN;
> +
> + err = qman_create_cgr(&priv->cgr_data.cgr, QMAN_CGR_FLAG_USE_INIT,
> + &initcgr);
> + if (err < 0) {
> + pr_err("Error %d creating CGR with ID %d\n", err,
> + priv->cgr_data.cgr.cgrid);
> + qman_release_cgrid(priv->cgr_data.cgr.cgrid);
> + goto out_error;
> + }
> + pr_debug("Created CGR %d for netdev with hwaddr %pM on QMan channel %d\n",
> + priv->cgr_data.cgr.cgrid, priv->mac_dev->addr,
> + priv->cgr_data.cgr.chan);
> +
> +out_error:
> + return err;
> +}
> +EXPORT_SYMBOL(dpaa_eth_cgr_init);
> +
> +static inline void dpa_setup_ingress(const struct dpa_priv_s *priv,
> + struct dpa_fq *fq,
> + const struct qman_fq *template)
> +{
> + fq->fq_base = *template;
> + fq->net_dev = priv->net_dev;
> +
> + fq->flags = QMAN_FQ_FLAG_NO_ENQUEUE;
> + fq->channel = priv->channel;
> +}
> +
> +static inline void dpa_setup_egress(const struct dpa_priv_s *priv,
> + struct dpa_fq *fq,
> + struct fm_port *port,
> + const struct qman_fq *template)
> +{
> + fq->fq_base = *template;
> + fq->net_dev = priv->net_dev;
> +
> + if (port) {
> + fq->flags = QMAN_FQ_FLAG_TO_DCPORTAL;
> + fq->channel = (u16)fm_get_tx_port_channel(port);
> + } else {
> + fq->flags = QMAN_FQ_FLAG_NO_MODIFY;
> + }
> +}
> +
> +void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
> + struct fm_port *tx_port)
> +{
> + struct dpa_fq *fq;
> + u16 portals[NR_CPUS];
> + int cpu, num_portals = 0;
> + const cpumask_t *affine_cpus = qman_affine_cpus();
> + int egress_cnt = 0, conf_cnt = 0;
> +
> + for_each_cpu(cpu, affine_cpus)
> + portals[num_portals++] = qman_affine_channel(cpu);
> + if (num_portals == 0)
> + dev_err(priv->net_dev->dev.parent,
> + "No Qman software (affine) channels found");
> +
> + /* Initialize each FQ in the list */
> + list_for_each_entry(fq, &priv->dpa_fq_list, list) {
> + switch (fq->fq_type) {
> + case FQ_TYPE_RX_DEFAULT:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
> + break;
> + case FQ_TYPE_RX_ERROR:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->rx_errq);
> + break;
> + case FQ_TYPE_TX:
> + dpa_setup_egress(priv, fq, tx_port,
> + &fq_cbs->egress_ern);
> + /* If we have more Tx queues than the number of cores,
> + * just ignore the extra ones.
> + */
> + if (egress_cnt < DPAA_ETH_TX_QUEUES)
> + priv->egress_fqs[egress_cnt++] = &fq->fq_base;
> + break;
> + case FQ_TYPE_TX_CONFIRM:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
> + break;
> + case FQ_TYPE_TX_CONF_MQ:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
> + priv->conf_fqs[conf_cnt++] = &fq->fq_base;
> + break;
> + case FQ_TYPE_TX_ERROR:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_errq);
> + break;
> + default:
> + dev_warn(priv->net_dev->dev.parent,
> + "Unknown FQ type detected!\n");
> + break;
> + }
> + }
> +
> + /* The number of Tx queues may be smaller than the number of cores, if
> + * the Tx queue range is specified in the device tree instead of being
> + * dynamically allocated.
> + * Make sure all CPUs receive a corresponding Tx queue.
> + */
> + while (egress_cnt < DPAA_ETH_TX_QUEUES) {
> + list_for_each_entry(fq, &priv->dpa_fq_list, list) {
> + if (fq->fq_type != FQ_TYPE_TX)
> + continue;
> + priv->egress_fqs[egress_cnt++] = &fq->fq_base;
> + if (egress_cnt == DPAA_ETH_TX_QUEUES)
> + break;
> + }
> + }
> +}
> +EXPORT_SYMBOL(dpa_fq_setup);
> +
> +int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable)
> +{
> + int _errno;
> + const struct dpa_priv_s *priv;
> + struct device *dev;
> + struct qman_fq *fq;
> + struct qm_mcc_initfq initfq;
> + struct qman_fq *confq;
> +
> + priv = netdev_priv(dpa_fq->net_dev);
> + dev = dpa_fq->net_dev->dev.parent;
> +
> + if (dpa_fq->fqid == 0)
> + dpa_fq->flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
> +
> + dpa_fq->init = !(dpa_fq->flags & QMAN_FQ_FLAG_NO_MODIFY);
> +
> + _errno = qman_create_fq(dpa_fq->fqid, dpa_fq->flags, &dpa_fq->fq_base);
> + if (_errno) {
> + dev_err(dev, "qman_create_fq() failed\n");
> + return _errno;
> + }
> + fq = &dpa_fq->fq_base;
> +
> + if (dpa_fq->init) {
> + initfq.we_mask = QM_INITFQ_WE_FQCTRL;
> + /* FIXME: why would we want to keep an empty FQ in cache? */
> + initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
> +
> + /* Try to reduce the number of portal interrupts for
> + * Tx Confirmation FQs.
> + */
> + if (dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM)
> + initfq.fqd.fq_ctrl |= QM_FQCTRL_HOLDACTIVE;
> +
> + /* FQ placement */
> + initfq.we_mask |= QM_INITFQ_WE_DESTWQ;
> +
> + initfq.fqd.dest.channel = dpa_fq->channel;
> + initfq.fqd.dest.wq = dpa_fq->wq;
> +
> + /* Put all egress queues in a congestion group of their own.
> + * Sensu stricto, the Tx confirmation queues are Rx FQs,
> + * rather than Tx - but they nonetheless account for the
> + * memory footprint on behalf of egress traffic. We therefore
> + * place them in the netdev's CGR, along with the Tx FQs.
> + */
> + if (dpa_fq->fq_type == FQ_TYPE_TX ||
> + dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM ||
> + dpa_fq->fq_type == FQ_TYPE_TX_CONF_MQ) {
> + initfq.we_mask |= QM_INITFQ_WE_CGID;
> + initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
> + initfq.fqd.cgid = (u8)priv->cgr_data.cgr.cgrid;
> + /* Set a fixed overhead accounting, in an attempt to
> + * reduce the impact of fixed-size skb shells and the
> + * driver's needed headroom on system memory. This is
> + * especially the case when the egress traffic is
> + * composed of small datagrams.
> + * Unfortunately, QMan's OAL value is capped to an
> + * insufficient value, but even that is better than
> + * no overhead accounting at all.
> + */
> + initfq.we_mask |= QM_INITFQ_WE_OAC;
> + initfq.fqd.oac_init.oac = QM_OAC_CG;
> + initfq.fqd.oac_init.oal =
> + (signed char)(min(sizeof(struct sk_buff) +
> + priv->tx_headroom,
> + (size_t)FSL_QMAN_MAX_OAL));
> + }
> +
> + if (td_enable) {
> + initfq.we_mask |= QM_INITFQ_WE_TDTHRESH;
> + qm_fqd_taildrop_set(&initfq.fqd.td,
> + DPA_FQ_TD, 1);
> + initfq.fqd.fq_ctrl = QM_FQCTRL_TDE;
> + }
> +
> + /* Configure the Tx confirmation queue, now that we know
> + * which Tx queue it pairs with.
> + */
> + if (dpa_fq->fq_type == FQ_TYPE_TX) {
> + confq = _dpa_get_tx_conf_queue(priv, &dpa_fq->fq_base);
> + if (confq) {
> + initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
> + /* ContextA: OVOM=1 (use contextA2 bits instead of ICAD)
> + * A2V=1 (contextA A2 field is valid)
> + * A0V=1 (contextA A0 field is valid)
> + * ContextA A2: EBD=1 (deallocate buffers inside FMan)
> + */
> + initfq.fqd.context_a.hi = 0x1a000000;
> + initfq.fqd.context_a.lo = 0x80000000;
> + }
> + }
> +
> + /* Put all *private* ingress queues in our "ingress CGR". */
> + if (priv->use_ingress_cgr &&
> + (dpa_fq->fq_type == FQ_TYPE_RX_DEFAULT ||
> + dpa_fq->fq_type == FQ_TYPE_RX_ERROR)) {
> + initfq.we_mask |= QM_INITFQ_WE_CGID;
> + initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
> + initfq.fqd.cgid = (u8)priv->ingress_cgr.cgrid;
> + /* Set a fixed overhead accounting, just like for the
> + * egress CGR.
> + */
> + initfq.we_mask |= QM_INITFQ_WE_OAC;
> + initfq.fqd.oac_init.oac = QM_OAC_CG;
> + initfq.fqd.oac_init.oal =
> + (signed char)(min(sizeof(struct sk_buff) +
> + priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
> + }
> +
> + /* Initialization common to all ingress queues */
> + if (dpa_fq->flags & QMAN_FQ_FLAG_NO_ENQUEUE) {
> + initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
> + initfq.fqd.fq_ctrl |=
> + QM_FQCTRL_CTXASTASHING | QM_FQCTRL_AVOIDBLOCK;
> + initfq.fqd.context_a.stashing.exclusive =
> + QM_STASHING_EXCL_DATA | QM_STASHING_EXCL_CTX |
> + QM_STASHING_EXCL_ANNOTATION;
> + initfq.fqd.context_a.stashing.data_cl = 2;
> + initfq.fqd.context_a.stashing.annotation_cl = 1;
> + initfq.fqd.context_a.stashing.context_cl =
> + DIV_ROUND_UP(sizeof(struct qman_fq), 64);
> + }
> +
> + _errno = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &initfq);
> + if (_errno < 0) {
> + dev_err(dev, "qman_init_fq(%u) = %d\n",
> + qman_fq_fqid(fq), _errno);
> + qman_destroy_fq(fq, 0);
> + return _errno;
> + }
> + }
> +
> + dpa_fq->fqid = qman_fq_fqid(fq);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_fq_init);
> +
> +static int __cold __attribute__((nonnull))
> +_dpa_fq_free(struct device *dev, struct qman_fq *fq)
> +{
> + int _errno, __errno;
> + struct dpa_fq *dpa_fq;
> + const struct dpa_priv_s *priv;
> +
> + _errno = 0;
> +
> + dpa_fq = container_of(fq, struct dpa_fq, fq_base);
> + priv = netdev_priv(dpa_fq->net_dev);
> +
> + if (dpa_fq->init) {
> + _errno = qman_retire_fq(fq, NULL);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + dev_err(dev, "qman_retire_fq(%u) = %d\n",
> + qman_fq_fqid(fq), _errno);
> +
> + __errno = qman_oos_fq(fq);
> + if (unlikely(__errno < 0) && netif_msg_drv(priv)) {
> + dev_err(dev, "qman_oos_fq(%u) = %d\n",
> + qman_fq_fqid(fq), __errno);
> + if (_errno >= 0)
> + _errno = __errno;
> + }
> + }
> +
> + qman_destroy_fq(fq, 0);
> + list_del(&dpa_fq->list);
> +
> + return _errno;
> +}
> +
> +int __cold __attribute__((nonnull))
> +dpa_fq_free(struct device *dev, struct list_head *list)
> +{
> + int _errno, __errno;
> + struct dpa_fq *dpa_fq, *tmp;
> +
> + _errno = 0;
> + list_for_each_entry_safe(dpa_fq, tmp, list, list) {
> + __errno = _dpa_fq_free(dev, (struct qman_fq *)dpa_fq);
> + if (unlikely(__errno < 0) && _errno >= 0)
> + _errno = __errno;
> + }
> +
> + return _errno;
> +}
> +EXPORT_SYMBOL(dpa_fq_free);
> +
> +static void
> +dpaa_eth_init_tx_port(struct fm_port *port, struct dpa_fq *errq,
> + struct dpa_fq *defq,
> + struct dpa_buffer_layout_s *buf_layout)
> +{
> + struct fm_port_params tx_port_param;
> +
> + memset(&tx_port_param, 0, sizeof(tx_port_param));
> + dpaa_eth_init_port(tx, port, tx_port_param, errq->fqid, defq->fqid,
> + buf_layout, false);
> +}
> +
> +static void
> +dpaa_eth_init_rx_port(struct fm_port *port, struct dpa_bp *bp, size_t count,
> + struct dpa_fq *errq, struct dpa_fq *defq,
> + struct dpa_buffer_layout_s *buf_layout)
> +{
> + struct fm_port_params rx_port_param;
> + int i;
> +
> + memset(&rx_port_param, 0, sizeof(rx_port_param));
> + count = min(ARRAY_SIZE(rx_port_param.pool_param), count);
> + rx_port_param.num_pools = (u8)count;
> + for (i = 0; i < count; i++) {
> + if (i >= rx_port_param.num_pools)
> + break;
> + rx_port_param.pool_param[i].id = bp[i].bpid;
> + rx_port_param.pool_param[i].size = (u16)bp[i].size;
> + }
> +
> + dpaa_eth_init_port(rx, port, rx_port_param, errq->fqid, defq->fqid,
> + buf_layout, false);
> +}
> +
> +void dpaa_eth_init_ports(struct mac_device *mac_dev,
> + struct dpa_bp *bp, size_t count,
> + struct fm_port_fqs *port_fqs,
> + struct dpa_buffer_layout_s *buf_layout,
> + struct device *dev)
> +{
> + struct fm_port *rxport = mac_dev->port_dev[RX];
> + struct fm_port *txport = mac_dev->port_dev[TX];
> +
> + dpaa_eth_init_tx_port(txport, port_fqs->tx_errq,
> + port_fqs->tx_defq, &buf_layout[TX]);
> + dpaa_eth_init_rx_port(rxport, bp, count, port_fqs->rx_errq,
> + port_fqs->rx_defq, &buf_layout[RX]);
> +}
> +EXPORT_SYMBOL(dpaa_eth_init_ports);
> +
> +void __attribute__((nonnull))
> +dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
> +{
> + struct dpa_bp *_dpa_bp;
> + struct bm_buffer _bmb;
> +
> + _bmb.hi = fd->addr_hi;
> + _bmb.lo = fd->addr_lo;
> +
> + _dpa_bp = dpa_bpid2pool(fd->bpid);
> + DPA_ERR_ON(!_dpa_bp);
> +
> + DPA_ERR_ON(fd->format == qm_fd_sg);
> +
> + while (bman_release(_dpa_bp->pool, &_bmb, 1, 0))
> + cpu_relax();
> +}
> +EXPORT_SYMBOL(dpa_fd_release);
> +
> +/**
> + * Turn on HW checksum computation for this outgoing frame.
> + * If the current protocol is not something we support in this regard
> + * (or if the stack has already computed the SW checksum), we do nothing.
> + *
> + * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
> + * otherwise.
> + *
> + * Note that this function may modify the fd->cmd field and the skb data buffer
> + * (the Parse Results area).
> + */
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv,
> + struct sk_buff *skb,
> + struct qm_fd *fd,
> + char *parse_results)
> +{
> + fm_prs_result *parse_result;
> + struct iphdr *iph;
> + struct ipv6hdr *ipv6h = NULL;
> + int l4_proto;
> + int ethertype = ntohs(skb->protocol);
> + int retval = 0;
> +
> + if (skb->ip_summed != CHECKSUM_PARTIAL)
> + return 0;
> +
> + /* Note: L3 csum seems to be already computed in sw, but we can't choose
> + * L4 alone from the FM configuration anyway.
> + */
> +
> + /* Fill in some fields of the Parse Results array, so the FMan
> + * can find them as if they came from the FMan Parser.
> + */
> + parse_result = (fm_prs_result *)parse_results;
> +
> + /* If we're dealing with VLAN, get the real Ethernet type */
> + if (ethertype == ETH_P_8021Q) {
> + /* We can't always assume the MAC header is set correctly
> + * by the stack, so reset to beginning of skb->data
> + */
> + skb_reset_mac_header(skb);
> + ethertype = ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
> + }
> +
> + /* Fill in the relevant L3 parse result fields
> + * and read the L4 protocol type
> + */
> + switch (ethertype) {
> + case ETH_P_IP:
> + parse_result->l3r = FM_L3_PARSE_RESULT_IPV4;
> + iph = ip_hdr(skb);
> + DPA_ERR_ON(!iph);
> + l4_proto = ntohs(iph->protocol);
> + break;
> + case ETH_P_IPV6:
> + parse_result->l3r = FM_L3_PARSE_RESULT_IPV6;
> + ipv6h = ipv6_hdr(skb);
> + DPA_ERR_ON(!ipv6h);
> + l4_proto = ntohs(ipv6h->nexthdr);
> + break;
> + default:
> + /* We shouldn't even be here */
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_alert(priv->net_dev,
> + "Can't compute HW csum for L3 proto 0x%x\n",
> + ntohs(skb->protocol));
> + retval = -EIO;
> + goto return_error;
> + }
> +
> + /* Fill in the relevant L4 parse result fields */
> + switch (l4_proto) {
> + case IPPROTO_UDP:
> + parse_result->l4r = FM_L4_PARSE_RESULT_UDP;
> + break;
> + case IPPROTO_TCP:
> + parse_result->l4r = FM_L4_PARSE_RESULT_TCP;
> + break;
> + default:
> + /* This can as well be a BUG() */
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_alert(priv->net_dev,
> + "Can't compute HW csum for L4 proto 0x%x\n",
> + l4_proto);
> + retval = -EIO;
> + goto return_error;
> + }
> +
> + /* At index 0 is IPOffset_1 as defined in the Parse Results */
> + parse_result->ip_off[0] = (u8)skb_network_offset(skb);
> + parse_result->l4_off = (u8)skb_transport_offset(skb);
> +
> + /* Enable L3 (and L4, if TCP or UDP) HW checksum. */
> + fd->cmd |= FM_FD_CMD_RPD | FM_FD_CMD_DTC;
> +
> + /* On P1023 and similar platforms fd->cmd interpretation could
> + * be disabled by setting CONTEXT_A bit ICMD; currently this bit
> + * is not set so we do not need to check; in the future, if/when
> + * using context_a we need to check this bit
> + */
> +
> +return_error:
> + return retval;
> +}
> +EXPORT_SYMBOL(dpa_enable_tx_csum);
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> new file mode 100644
> index 0000000..96bc63e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> @@ -0,0 +1,119 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef __DPAA_ETH_COMMON_H
> +#define __DPAA_ETH_COMMON_H
> +
> +#include <linux/etherdevice.h> /* struct net_device */
> +#include <soc/fsl/bman.h> /* struct bm_buffer */
> +#include <linux/of_platform.h> /* struct platform_device */
> +#include <linux/net_tstamp.h> /* struct hwtstamp_config */
> +
> +#include "dpaa_eth.h"
> +#include "fsl_fman_drv.h"
> +
> +#define dpaa_eth_init_port(type, port, param, errq_id, defq_id, buf_layout,\
> + frag_enabled) \
> +{ \
> + param.errq = errq_id; \
> + param.defq = defq_id; \
> + param.priv_data_size = buf_layout->priv_data_size; \
> + param.parse_results = buf_layout->parse_results; \
> + param.hash_results = buf_layout->hash_results; \
> + param.time_stamp = buf_layout->time_stamp; \
> + param.data_align = buf_layout->data_align; \
> + fm_set_##type##_port_params(port, ¶m); \
> +}
> +
> +#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
> +
> +/* used in napi related functions */
> +extern u16 qman_portal_max;
> +
> +int dpa_netdev_init(struct net_device *net_dev,
> + const u8 *mac_addr,
> + u16 tx_timeout);
> +int __cold dpa_start(struct net_device *net_dev);
> +int __cold dpa_stop(struct net_device *net_dev);
> +void __cold dpa_timeout(struct net_device *net_dev);
> +struct rtnl_link_stats64 * __cold
> +dpa_get_stats64(struct net_device *net_dev,
> + struct rtnl_link_stats64 *stats);
> +int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
> +int dpa_ndo_init(struct net_device *net_dev);
> +int dpa_set_features(struct net_device *dev, netdev_features_t features);
> +netdev_features_t dpa_fix_features(struct net_device *dev,
> + netdev_features_t features);
> +int __cold dpa_remove(struct platform_device *pdev);
> +struct mac_device * __cold __must_check
> +__attribute__((nonnull)) dpa_mac_dev_get(struct platform_device *pdev);
> +int dpa_mac_hw_index_get(struct platform_device *pdev);
> +int dpa_mac_fman_index_get(struct platform_device *pdev);
> +int dpa_set_mac_address(struct net_device *net_dev, void *addr);
> +void dpa_set_rx_mode(struct net_device *net_dev);
> +void dpa_set_buffers_layout(struct mac_device *mac_dev,
> + struct dpa_buffer_layout_s *layout);
> +int __attribute__((nonnull))
> +dpa_bp_alloc(struct dpa_bp *dpa_bp);
> +void __cold __attribute__((nonnull))
> +dpa_bp_free(struct dpa_priv_s *priv);
> +struct dpa_bp *dpa_bpid2pool(int bpid);
> +void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
> +bool dpa_bpid2pool_use(int bpid);
> +void dpa_bp_drain(struct dpa_bp *bp);
> +struct dpa_fq *dpa_fq_alloc(struct device *dev,
> + const struct fqid_cell *fqids,
> + struct list_head *list,
> + enum dpa_fq_type fq_type);
> +int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
> + struct fm_port_fqs *port_fqs,
> + bool tx_conf_fqs_per_core,
> + enum port_type ptype);
> +int dpa_get_channel(void);
> +void dpa_release_channel(void);
> +int dpaa_eth_add_channel(void *__arg);
> +int dpaa_eth_cgr_init(struct dpa_priv_s *priv);
> +void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t *fq_cbs,
> + struct fm_port *tx_port);
> +int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable);
> +int __cold __attribute__((nonnull))
> +dpa_fq_free(struct device *dev, struct list_head *list);
> +void dpaa_eth_init_ports(struct mac_device *mac_dev,
> + struct dpa_bp *bp, size_t count,
> + struct fm_port_fqs *port_fqs,
> + struct dpa_buffer_layout_s *buf_layout,
> + struct device *dev);
> +void __attribute__((nonnull))
> +dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv,
> + struct sk_buff *skb,
> + struct qm_fd *fd,
> + char *parse_results);
> +#endif /* __DPAA_ETH_COMMON_H */
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
> new file mode 100644
> index 0000000..ef3117e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
> @@ -0,0 +1,428 @@
> +/* Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#define pr_fmt(fmt) \
> + KBUILD_MODNAME ": " fmt
> +
> +#include <linux/init.h>
> +#include <linux/skbuff.h>
> +#include <linux/highmem.h>
> +#include <soc/fsl/bman.h>
> +
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +
> +/* Convenience macros for storing/retrieving the skb back-pointers.
> + *
> + * NB: @off is an offset from a (struct sk_buff **) pointer!
> + */
> +#define DPA_WRITE_SKB_PTR(skb, skbh, addr, off) \
> + { \
> + skbh = (struct sk_buff **)addr; \
> + *(skbh + (off)) = skb; \
> + }
> +#define DPA_READ_SKB_PTR(skb, skbh, addr, off) \
> + { \
> + skbh = (struct sk_buff **)addr; \
> + skb = *(skbh + (off)); \
> + }
> +
> +static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
> +{
> + struct bm_buffer bmb[8];
> + void *new_buf;
> + dma_addr_t addr;
> + u8 i;
> + struct device *dev = dpa_bp->dev;
> + struct sk_buff *skb, **skbh;
> +
> + for (i = 0; i < 8; i++) {
> + /* We'll prepend the skb back-pointer; can't use the DPA
> + * priv space, because FMan will overwrite it (from offset 0)
> + * if it ends up being the second, third, etc. fragment
> + * in a S/G frame.
> + *
> + * We only need enough space to store a pointer, but allocate
> + * an entire cacheline for performance reasons.
> + */
> + new_buf = netdev_alloc_frag(SMP_CACHE_BYTES + DPA_BP_RAW_SIZE);
> + if (unlikely(!new_buf))
> + goto netdev_alloc_failed;
> + new_buf = PTR_ALIGN(new_buf + SMP_CACHE_BYTES, SMP_CACHE_BYTES);
> +
> + skb = build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
> + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
> + if (unlikely(!skb)) {
> + put_page(virt_to_head_page(new_buf));
> + goto build_skb_failed;
> + }
> + DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
> +
> + addr = dma_map_single(dev, new_buf,
> + dpa_bp->size, DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(dev, addr)))
> + goto dma_map_failed;
> +
> + bm_buffer_set64(&bmb[i], addr);
> + }
> +
> +release_bufs:
> + /* Release the buffers. In case bman is busy, keep trying
> + * until successful. bman_release() is guaranteed to succeed
> + * in a reasonable amount of time
> + */
> + while (unlikely(bman_release(dpa_bp->pool, bmb, i, 0)))
> + cpu_relax();
> + return i;
> +
> +dma_map_failed:
> + kfree_skb(skb);
> +
> +build_skb_failed:
> +netdev_alloc_failed:
> + net_err_ratelimited("dpa_bp_add_8_bufs() failed\n");
> + WARN_ONCE(1, "Memory allocation failure on Rx\n");
> +
> + bm_buffer_set64(&bmb[i], 0);
> + /* Avoid releasing a completely null buffer; bman_release() requires
> + * at least one buffer.
> + */
> + if (likely(i))
> + goto release_bufs;
> +
> + return 0;
> +}
> +
> +/* Cold path wrapper over _dpa_bp_add_8_bufs(). */
> +static void dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp, int cpu)
> +{
> + int *count_ptr = per_cpu_ptr(dpa_bp->percpu_count, cpu);
> + *count_ptr += _dpa_bp_add_8_bufs(dpa_bp);
> +}
> +
> +int dpa_bp_priv_seed(struct dpa_bp *dpa_bp)
> +{
> + int i;
> +
> + /* Give each CPU an allotment of "config_count" buffers */
> + for_each_possible_cpu(i) {
> + int j;
> +
> + /* Although we access another CPU's counters here
> + * we do it at boot time so it is safe
> + */
> + for (j = 0; j < dpa_bp->config_count; j += 8)
> + dpa_bp_add_8_bufs(dpa_bp, i);
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_bp_priv_seed);
> +
> +/* Add buffers/(pages) for Rx processing whenever bpool count falls below
> + * REFILL_THRESHOLD.
> + */
> +int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
> +{
> + int count = *countptr;
> + int new_bufs;
> +
> + if (unlikely(count < FSL_DPAA_ETH_REFILL_THRESHOLD)) {
> + do {
> + new_bufs = _dpa_bp_add_8_bufs(dpa_bp);
> + if (unlikely(!new_bufs)) {
> + /* Avoid looping forever if we've temporarily
> + * run out of memory. We'll try again at the
> + * next NAPI cycle.
> + */
> + break;
> + }
> + count += new_bufs;
> + } while (count < FSL_DPAA_ETH_MAX_BUF_COUNT);
> +
> + *countptr = count;
> + if (unlikely(count < FSL_DPAA_ETH_MAX_BUF_COUNT))
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpaa_eth_refill_bpools);
> +
> +/* Cleanup function for outgoing frame descriptors that were built on Tx path,
> + * either contiguous frames or scatter/gather ones.
> + * Skb freeing is not handled here.
> + *
> + * This function may be called on error paths in the Tx function, so guard
> + * against cases when not all fd relevant fields were filled in.
> + *
> + * Return the skb backpointer, since for S/G frames the buffer containing it
> + * gets freed here.
> + */
> +struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
> + const struct qm_fd *fd)
> +{
> + struct dpa_bp *dpa_bp = priv->dpa_bp;
> + dma_addr_t addr = qm_fd_addr(fd);
> + struct sk_buff **skbh;
> + struct sk_buff *skb = NULL;
> + const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
> + int nr_frags;
> +
> + dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, dma_dir);
> +
> + /* retrieve skb back pointer */
> + DPA_READ_SKB_PTR(skb, skbh, phys_to_virt(addr), 0);
> + nr_frags = skb_shinfo(skb)->nr_frags;
> +
> + return skb;
> +}
> +
> +/* Build a linear skb around the received buffer.
> + * We are guaranteed there is enough room at the end of the data buffer to
> + * accommodate the shared info area of the skb.
> + */
> +static struct sk_buff *__hot contig_fd_to_skb(const struct dpa_priv_s *priv,
> + const struct qm_fd *fd)
> +{
> + struct sk_buff *skb = NULL, **skbh;
> + ssize_t fd_off = dpa_fd_offset(fd);
> + dma_addr_t addr = qm_fd_addr(fd);
> + void *vaddr;
> +
> + vaddr = phys_to_virt(addr);
> + DPA_ERR_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
> +
> + /* Retrieve the skb and adjust data and tail pointers, to make sure
> + * forwarded skbs will have enough space on Tx if extra headers
> + * are added.
> + */
> + DPA_READ_SKB_PTR(skb, skbh, vaddr, -1);
> +
> + DPA_ERR_ON(fd_off != priv->rx_headroom);
> + skb_reserve(skb, fd_off);
> + skb_put(skb, dpa_fd_length(fd));
> +
> + skb->ip_summed = CHECKSUM_NONE;
> +
> + return skb;
> +}
> +
> +void __hot _dpa_rx(struct net_device *net_dev,
> + struct qman_portal *portal,
> + const struct dpa_priv_s *priv,
> + struct dpa_percpu_priv_s *percpu_priv,
> + const struct qm_fd *fd,
> + u32 fqid,
> + int *count_ptr)
> +{
> + struct dpa_bp *dpa_bp;
> + struct sk_buff *skb;
> + dma_addr_t addr = qm_fd_addr(fd);
> + u32 fd_status = fd->status;
> + unsigned int skb_len;
> + struct rtnl_link_stats64 *percpu_stats = &percpu_priv->stats;
> +
> + if (unlikely(fd_status & FM_FD_STAT_RX_ERRORS) != 0) {
> + if (netif_msg_hw(priv) && net_ratelimit())
> + netdev_warn(net_dev, "FD status = 0x%08x\n",
> + fd_status & FM_FD_STAT_RX_ERRORS);
> +
> + percpu_stats->rx_errors++;
> + goto _release_frame;
> + }
> +
> + dpa_bp = priv->dpa_bp;
> + DPA_ERR_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
> +
> + /* prefetch the first 64 bytes of the frame */
> + dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
> + prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
> +
> + /* The only FD type that we may receive is contig */
> + DPA_ERR_ON((fd->format != qm_fd_contig));
> +
> + skb = contig_fd_to_skb(priv, fd);
> +
> + /* Account for the contig buffer
> + * having been removed from the pool.
> + */
> + (*count_ptr)--;
> + skb->protocol = eth_type_trans(skb, net_dev);
> +
> + /* IP Reassembled frames are allowed to be larger than MTU */
> + if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
> + !(fd_status & FM_FD_IPR))) {
> + percpu_stats->rx_dropped++;
> + goto drop_bad_frame;
> + }
> +
> + skb_len = skb->len;
> +
> + if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
> + goto packet_dropped;
> +
> + percpu_stats->rx_packets++;
> + percpu_stats->rx_bytes += skb_len;
> +
> +packet_dropped:
> + return;
> +
> +drop_bad_frame:
> + dev_kfree_skb(skb);
> + return;
> +
> +_release_frame:
> + dpa_fd_release(net_dev, fd);
> +}
> +
> +static int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
> + struct sk_buff *skb, struct qm_fd *fd,
> + int *count_ptr, int *offset)
> +{
> + struct sk_buff **skbh;
> + dma_addr_t addr;
> + struct dpa_bp *dpa_bp = priv->dpa_bp;
> + struct net_device *net_dev = priv->net_dev;
> + int err;
> + enum dma_data_direction dma_dir;
> + unsigned char *buffer_start;
> +
> + {
> + /* We are guaranteed to have at least tx_headroom bytes
> + * available, so just use that for offset.
> + */
> + fd->bpid = 0xff;
> + buffer_start = skb->data - priv->tx_headroom;
> + fd->offset = priv->tx_headroom;
> + dma_dir = DMA_TO_DEVICE;
> +
> + DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
> + }
> +
> + /* Enable L3/L4 hardware checksum computation.
> + *
> + * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
> + * need to write into the skb.
> + */
> + err = dpa_enable_tx_csum(priv, skb, fd,
> + ((char *)skbh) + DPA_TX_PRIV_DATA_SIZE);
> + if (unlikely(err < 0)) {
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_err(net_dev, "HW csum error: %d\n", err);
> + return err;
> + }
> +
> + /* Fill in the rest of the FD fields */
> + fd->format = qm_fd_contig;
> + fd->length20 = skb->len;
> + fd->cmd |= FM_FD_CMD_FCO;
> +
> + /* Map the entire buffer size that may be seen by FMan, but no more */
> + addr = dma_map_single(dpa_bp->dev, skbh,
> + skb_end_pointer(skb) - buffer_start, dma_dir);
> + if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_err(net_dev, "dma_map_single() failed\n");
> + return -EINVAL;
> + }
> + fd->addr_hi = (u8)upper_32_bits(addr);
> + fd->addr_lo = lower_32_bits(addr);
> +
> + return 0;
> +}
> +
> +int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
> +{
> + struct dpa_priv_s *priv;
> + struct qm_fd fd;
> + struct dpa_percpu_priv_s *percpu_priv;
> + struct rtnl_link_stats64 *percpu_stats;
> + const int queue_mapping = dpa_get_queue_mapping(skb);
> + int *countptr, offset = 0;
> +
> + priv = netdev_priv(net_dev);
> + /* Non-migratable context, safe to use raw_cpu_ptr */
> + percpu_priv = raw_cpu_ptr(priv->percpu_priv);
> + percpu_stats = &percpu_priv->stats;
> + countptr = raw_cpu_ptr(priv->dpa_bp->percpu_count);
> +
> + clear_fd(&fd);
> +
> + /* Make sure we have enough headroom to accommodate private
> + * data, parse results, etc. Normally this shouldn't happen if
> + * we're here via the standard kernel stack.
> + */
> + if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
> + struct sk_buff *skb_new;
> +
> + skb_new = skb_realloc_headroom(skb, priv->tx_headroom);
> + if (unlikely(!skb_new)) {
> + dev_kfree_skb(skb);
> + percpu_stats->tx_errors++;
> + return NETDEV_TX_OK;
> + }
> + dev_kfree_skb(skb);
> + skb = skb_new;
> + }
> +
> + /* We're going to store the skb backpointer at the beginning
> + * of the data buffer, so we need a privately owned skb
> + */
> +
> + /* Code borrowed from skb_unshare(). */
> + if (skb_cloned(skb)) {
> + struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
> +
> + /* Finally, create a contig FD from this skb */
> + skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
> +
> + kfree_skb(skb);
> + skb = nskb;
> + /* skb_copy() has now linearized the skbuff. */
> + }
> +
> + if (unlikely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) < 0))
> + goto xmit_failed;
> +
> + net_dev->trans_start = jiffies;
> + return NETDEV_TX_OK;
> +
> +xmit_failed:
> + if (fd.cmd & FM_FD_CMD_FCO) {
> + (*countptr)--;
> + dpa_fd_release(net_dev, &fd);
> + percpu_stats->tx_errors++;
> + return NETDEV_TX_OK;
> + }
> + _dpa_cleanup_tx_fd(priv, &fd);
> + percpu_stats->tx_errors++;
> + dev_kfree_skb(skb);
> + return NETDEV_TX_OK;
> +}
> --
> 1.7.11.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet
@ 2015-03-18 16:30 ` Kumar Gala
0 siblings, 0 replies; 15+ messages in thread
From: Kumar Gala @ 2015-03-18 16:30 UTC (permalink / raw)
To: madalin.bucur; +Cc: netdev, linuxppc-dev, linux-kernel
On Mar 17, 2015, at 1:58 PM, Madalin Bucur <madalin.bucur@Freescale.com> =
wrote:
> This introduces the Freescale Data Path Acceleration Architecture
> (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
> BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
> the Freescale DPAA QorIQ platforms.
>=20
> Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
> ---
> drivers/net/ethernet/freescale/Kconfig | 2 +
> drivers/net/ethernet/freescale/Makefile | 1 +
> drivers/net/ethernet/freescale/dpaa/Kconfig | 49 +
> drivers/net/ethernet/freescale/dpaa/Makefile | 14 +
> drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 837 =
+++++++++++++
> drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 446 +++++++
> .../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1288 =
++++++++++++++++++++
> .../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 119 ++
> drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 428 +++++++
> 9 files changed, 3184 insertions(+)
> create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig
> create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> create mode 100644 =
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> create mode 100644 =
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
>=20
> diff --git a/drivers/net/ethernet/freescale/Kconfig =
b/drivers/net/ethernet/freescale/Kconfig
> index ba84c4a..dd485f1 100644
> --- a/drivers/net/ethernet/freescale/Kconfig
> +++ b/drivers/net/ethernet/freescale/Kconfig
> @@ -95,4 +95,6 @@ config GIANFAR
> This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
> and MPC86xx family of chips, and the FEC on the 8540.
>=20
> +source "drivers/net/ethernet/freescale/dpaa/Kconfig"
> +
> endif # NET_VENDOR_FREESCALE
> diff --git a/drivers/net/ethernet/freescale/Makefile =
b/drivers/net/ethernet/freescale/Makefile
> index 71debd1..b6c10ab 100644
> --- a/drivers/net/ethernet/freescale/Makefile
> +++ b/drivers/net/ethernet/freescale/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) +=3D fs_enet/
> obj-$(CONFIG_FSL_PQ_MDIO) +=3D fsl_pq_mdio.o
> obj-$(CONFIG_FSL_XGMAC_MDIO) +=3D xgmac_mdio.o
> obj-$(CONFIG_GIANFAR) +=3D gianfar_driver.o
> +obj-$(if $(CONFIG_FSL_DPAA_ETH),y) +=3D dpaa/
Why isn=92t
obj-$(CONFIG_FSL_DPAA_ETH) +=3D dpaa/=20
enough?
> obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) +=3D gianfar_ptp.o
> gianfar_driver-objs :=3D gianfar.o \
> gianfar_ethtool.o
> diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig =
b/drivers/net/ethernet/freescale/dpaa/Kconfig
> new file mode 100644
> index 0000000..7ef703c
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
> @@ -0,0 +1,49 @@
> +menuconfig FSL_DPAA_ETH
> + tristate "DPAA Ethernet"
> + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
> + select PHYLIB
> + select FSL_FMAN_MAC
> + ---help---
> + Data Path Acceleration Architecture Ethernet driver,
> + supporting the Freescale QorIQ chips.
> + Depends on Freescale Buffer Manager and Queue Manager
> + driver and Frame Manager Driver.
> +
> +if FSL_DPAA_ETH
> +
> +config FSL_DPAA_CS_THRESHOLD_1G
> + hex "Egress congestion threshold on 1G ports"
> + depends on FSL_DPAA_ETH
> + range 0x1000 0x10000000
> + default "0x06000000"
> + ---help---
> + The size in bytes of the egress Congestion State notification =
threshold on 1G ports.
> + The 1G dTSECs can quite easily be flooded by cores doing Tx in =
a tight loop
> + (e.g. by sending UDP datagrams at "while(1) speed"),
> + and the larger the frame size, the more acute the problem.
> + So we have to find a balance between these factors:
> + - avoiding the device staying congested for a prolonged =
time (risking
> + the netdev watchdog to fire - see also the =
tx_timeout module param);
> + - affecting performance of protocols such as TCP, =
which otherwise
> + behave well under the congestion notification =
mechanism;
> + - preventing the Tx cores from tightly-looping (as if the =
congestion
> + threshold was too low to be effective);
> + - running out of memory if the CS threshold is set too =
high.
> +
> +config FSL_DPAA_CS_THRESHOLD_10G
> + hex "Egress congestion threshold on 10G ports"
> + depends on FSL_DPAA_ETH
> + range 0x1000 0x20000000
> + default "0x10000000"
> + ---help ---
> + The size in bytes of the egress Congestion State notification =
threshold on 10G ports.
> +
> +config FSL_DPAA_INGRESS_CS_THRESHOLD
> + hex "Ingress congestion threshold on FMan ports"
> + depends on FSL_DPAA_ETH
> + default "0x10000000"
> + ---help---
> + The size in bytes of the ingress tail-drop threshold on FMan =
ports.
> + Traffic piling up above this value will be rejected by QMan =
and discarded by FMan.
> +
Do these thresholds really need to be kconfig options? Are they not =
changeable at runtime?
> +endif # FSL_DPAA_ETH
> diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile =
b/drivers/net/ethernet/freescale/dpaa/Makefile
> new file mode 100644
> index 0000000..bdeb04e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/Makefile
> @@ -0,0 +1,14 @@
> +#
> +# Makefile for the Freescale DPAA Ethernet controllers
> +#
> +ccflags-y +=3D -DVERSION=3D\=94\"
Is this really needed, if so we need to fix that.
> +#
> +# Include FMan headers
> +FMAN =3D $(srctree)/drivers/soc/fsl/fman
> +ccflags-y +=3D -I$(FMAN)
> +ccflags-y +=3D -I$(FMAN)/inc
> +ccflags-y +=3D -I$(FMAN)/flib
> +
> +obj-$(CONFIG_FSL_DPAA_ETH) +=3D fsl_dpa.o
> +
> +fsl_dpa-objs +=3D dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c =
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> new file mode 100644
> index 0000000..96a7cee
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> @@ -0,0 +1,837 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer in =
the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#define pr_fmt(fmt) \
> + KBUILD_MODNAME ": " fmt
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_mdio.h>
> +#include <linux/of_net.h>
> +#include <linux/kthread.h>
> +#include <linux/io.h>
> +#include <linux/if_arp.h> /* arp_hdr_len() */
> +#include <linux/if_vlan.h> /* VLAN_HLEN */
> +#include <linux/icmp.h> /* struct icmphdr */
> +#include <linux/ip.h> /* struct iphdr */
> +#include <linux/ipv6.h> /* struct ipv6hdr */
> +#include <linux/udp.h> /* struct udphdr */
> +#include <linux/tcp.h> /* struct tcphdr */
> +#include <linux/net.h> /* net_ratelimit() */
> +#include <linux/if_ether.h> /* ETH_P_IP and ETH_P_IPV6 */
> +#include <linux/highmem.h>
> +#include <linux/percpu.h>
> +#include <linux/dma-mapping.h>
> +#include <soc/fsl/bman.h>
> +
> +#include "fsl_fman.h"
> +#include "fm_ext.h"
> +#include "fm_port_ext.h"
> +
> +#include "mac.h"
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +
> +#define DPA_NAPI_WEIGHT 64
> +
> +/* Valid checksum indication */
> +#define DPA_CSUM_VALID 0xFFFF
> +
> +#define DPA_DESCRIPTION "FSL DPAA Ethernet driver"
> +
> +MODULE_LICENSE("Dual BSD/GPL");
> +
> +MODULE_AUTHOR("Andy Fleming <afleming@freescale.com>");
> +
> +MODULE_DESCRIPTION(DPA_DESCRIPTION);
These are typically at the end of the file, and kept together (ie no =
blank lines between them)
> +
> +static u8 debug =3D -1;
> +module_param(debug, byte, S_IRUGO);
> +MODULE_PARM_DESC(debug, "Module/Driver verbosity level");
> +
> +/* This has to work in tandem with the DPA_CS_THRESHOLD_xxx values. =
*/
> +static u16 tx_timeout =3D 1000;
> +module_param(tx_timeout, ushort, S_IRUGO);
> +MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
> +
>=20
[snip]
> +
> +static struct platform_device_id dpa_devtype[] =3D {
> + {
> + .name =3D "dpaa-ethernet",
> + .driver_data =3D 0,
> + }, {
> + }
> +};
> +MODULE_DEVICE_TABLE(platform, dpa_devtype);
> +
> +static struct platform_driver dpa_driver =3D {
> + .driver =3D {
> + .name =3D KBUILD_MODNAME,
> + .owner =3D THIS_MODULE,
> + },
> + .id_table =3D dpa_devtype,
> + .probe =3D dpaa_eth_priv_probe,
> + .remove =3D dpa_remove
> +};
> +
> +static int __init __cold dpa_load(void)
> +{
> + int _errno;
> +
> + pr_info(DPA_DESCRIPTION " (" VERSION ")\n");
> +
> + /* initialise dpaa_eth mirror values */
> + dpa_rx_extra_headroom =3D fm_get_rx_extra_headroom();
> + dpa_max_frm =3D fm_get_max_frm();
> +
> + _errno =3D platform_driver_register(&dpa_driver);
> + if (unlikely(_errno < 0)) {
> + pr_err(KBUILD_MODNAME
> + ": %s:%hu:%s(): platform_driver_register() =3D =
%d\n",
> + KBUILD_BASENAME ".c", __LINE__, __func__, =
_errno);
> + }
> +
> + pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
> + KBUILD_BASENAME ".c", __func__);
> +
> + return _errno;
> +}
> +module_init(dpa_load);
> +
> +static void __exit __cold dpa_unload(void)
> +{
> + pr_debug(KBUILD_MODNAME ": -> %s:%s()\n",
> + KBUILD_BASENAME ".c", __func__);
> +
> + platform_driver_unregister(&dpa_driver);
> +
> + /* Only one channel is used and needs to be relased after all
> + * interfaces are removed
> + */
> + dpa_release_channel();
> +
> + pr_debug(KBUILD_MODNAME ": %s:%s() ->\n",
> + KBUILD_BASENAME ".c", __func__);
> +}
> +module_exit(dpa_unload);
What=92s the point of this dpa platform driver?
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h =
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> new file mode 100644
> index 0000000..793491f
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
> @@ -0,0 +1,446 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer in =
the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef __DPA_H
> +#define __DPA_H
> +
> +#include <linux/netdevice.h>
> +#include <soc/fsl/qman.h> /* struct qman_fq */
> +
> +#include "fm_ext.h"
> +
> +extern int dpa_rx_extra_headroom;
> +extern int dpa_max_frm;
> +
> +#define dpa_get_rx_extra_headroom() dpa_rx_extra_headroom
> +#define dpa_get_max_frm() dpa_max_frm
> +
> +#define dpa_get_max_mtu() \
> + (dpa_get_max_frm() - (VLAN_ETH_HLEN + ETH_FCS_LEN))
> +
> +#define __hot
> +
> +/* Simple enum of FQ types - used for array indexing */
> +enum port_type {RX, TX};
> +
> +struct dpa_buffer_layout_s {
> + u16 priv_data_size;
> + bool parse_results;
> + bool time_stamp;
> + bool hash_results;
> + u16 data_align;
> +};
> +
> +#define DPA_ERR_ON(cond)
> +
> +#define DPA_TX_PRIV_DATA_SIZE 16
> +#define DPA_PARSE_RESULTS_SIZE sizeof(fm_prs_result)
> +#define DPA_TIME_STAMP_SIZE 8
> +#define DPA_HASH_RESULTS_SIZE 8
> +#define DPA_RX_PRIV_DATA_SIZE (DPA_TX_PRIV_DATA_SIZE + \
> + dpa_get_rx_extra_headroom())
> +
> +#define FM_FD_STAT_RX_ERRORS =
\
> + (FM_PORT_FRM_ERR_DMA | FM_PORT_FRM_ERR_PHYSICAL | \
> + FM_PORT_FRM_ERR_SIZE | FM_PORT_FRM_ERR_CLS_DISCARD | \
> + FM_PORT_FRM_ERR_EXTRACTION | FM_PORT_FRM_ERR_NO_SCHEME | \
> + FM_PORT_FRM_ERR_PRS_TIMEOUT | FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT =
| \
> + FM_PORT_FRM_ERR_PRS_HDR_ERR)
> +
> +#define FM_FD_STAT_TX_ERRORS \
> + (FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT | \
> + FM_PORT_FRM_ERR_LENGTH | FM_PORT_FRM_ERR_DMA)
> +
> +/* The raw buffer size must be cacheline aligned.
> + * Normally we use 2K buffers.
> + */
> +#define DPA_BP_RAW_SIZE 2048
> +
> +/* This is what FMan is ever allowed to use.
> + * FMan-DMA requires 16-byte alignment for Rx buffers, but =
SKB_DATA_ALIGN is
> + * even stronger (SMP_CACHE_BYTES-aligned), so we just get away with =
that,
> + * via SKB_WITH_OVERHEAD(). We can't rely on netdev_alloc_frag() =
giving us
> + * half-page-aligned buffers (can we?), so we reserve some more space
> + * for start-of-buffer alignment.
> + */
> +#define dpa_bp_size(buffer_layout) =
(SKB_WITH_OVERHEAD(DPA_BP_RAW_SIZE) - \
> + SMP_CACHE_BYTES)
> +/* We must ensure that skb_shinfo is always cacheline-aligned. */
> +#define DPA_SKB_SIZE(size) ((size) & ~(SMP_CACHE_BYTES - 1))
> +
> +/* Largest value that the FQD's OAL field can hold.
> + * This is DPAA-1.x specific.
> + */
> +#define FSL_QMAN_MAX_OAL 127
> +
> +/* Default alignment for start of data in an Rx FD */
> +#define DPA_FD_DATA_ALIGNMENT 16
> +
> +/* Values for the L3R field of the FM Parse Results
> + */
> +/* L3 Type field: First IP Present IPv4 */
> +#define FM_L3_PARSE_RESULT_IPV4 0x8000
> +/* L3 Type field: First IP Present IPv6 */
> +#define FM_L3_PARSE_RESULT_IPV6 0x4000
> +
> +/* Values for the L4R field of the FM Parse Results
> + * See $8.8.4.7.20 - L4 HXS - L4 Results from DPAA-Rev2 Reference =
Manual.
> + */
> +/* L4 Type field: UDP */
> +#define FM_L4_PARSE_RESULT_UDP 0x40
> +/* L4 Type field: TCP */
> +#define FM_L4_PARSE_RESULT_TCP 0x20
> +
> +#define FM_FD_STAT_ERR_PHYSICAL FM_PORT_FRM_ERR_PHYSICAL
> +
> +/* number of Tx queues to FMan */
> +#define DPAA_ETH_TX_QUEUES NR_CPUS
> +
> +#define DPAA_ETH_RX_QUEUES 128
> +
> +#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
> +#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
> +
> +/* More detailed FQ types - used for fine-grained WQ assignments */
> +enum dpa_fq_type {
> + FQ_TYPE_RX_DEFAULT =3D 1, /* Rx Default FQs */
> + FQ_TYPE_RX_ERROR, /* Rx Error FQs */
> + FQ_TYPE_RX_PCD, /* User-defined PCDs */
> + FQ_TYPE_TX, /* "Real" Tx FQs */
> + FQ_TYPE_TX_CONFIRM, /* Tx default Conf FQ (actually an Rx =
FQ) */
> + FQ_TYPE_TX_CONF_MQ, /* Tx conf FQs (one for each Tx FQ) */
> + FQ_TYPE_TX_ERROR, /* Tx Error FQs (these are actually Rx =
FQs) */
> +};
> +
> +struct dpa_fq {
> + struct qman_fq fq_base;
> + struct list_head list;
> + struct net_device *net_dev;
> + bool init;
> + u32 fqid;
> + u32 flags;
> + u16 channel;
> + u8 wq;
> + enum dpa_fq_type fq_type;
> +};
> +
> +struct dpa_fq_cbs_t {
> + struct qman_fq rx_defq;
> + struct qman_fq tx_defq;
> + struct qman_fq rx_errq;
> + struct qman_fq tx_errq;
> + struct qman_fq egress_ern;
> +};
> +
> +struct fqid_cell {
> + u32 start;
> + u32 count;
> +};
> +
> +struct dpa_bp {
> + struct bman_pool *pool;
> + u8 bpid;
> + struct device *dev;
> + union {
> + /* The buffer pools used for the private ports are =
initialized
> + * with target_count buffers for each CPU; at runtime =
the
> + * number of buffers per CPU is constantly brought back =
to this
> + * level
> + */
> + int target_count;
> + /* The configured value for the number of buffers in the =
pool,
> + * used for shared port buffer pools
> + */
> + int config_count;
> + };
> + size_t size;
> + bool seed_pool;
> + /* physical address of the contiguous memory used by the pool to =
store
> + * the buffers
> + */
> + dma_addr_t paddr;
> + /* virtual address of the contiguous memory used by the pool to =
store
> + * the buffers
> + */
> + void __iomem *vaddr;
> + /* current number of buffers in the bpool alloted to this CPU */
> + int __percpu *percpu_count;
> + atomic_t refs;
> + /* some bpools need to be seeded before use by this cb */
> + int (*seed_cb)(struct dpa_bp *);
> + /* some bpools need to be emptied before freeing; this cb is =
used
> + * for freeing of individual buffers taken from the pool
> + */
> + void (*free_buf_cb)(void *addr);
> +};
> +
> +struct dpa_napi_portal {
> + struct napi_struct napi;
> + struct qman_portal *p;
> +};
> +
> +struct dpa_percpu_priv_s {
> + struct net_device *net_dev;
> + struct dpa_napi_portal *np;
> + struct rtnl_link_stats64 stats;
> +};
> +
> +struct dpa_priv_s {
> + struct dpa_percpu_priv_s __percpu *percpu_priv;
> + struct dpa_bp *dpa_bp;
> + /* Store here the needed Tx headroom for convenience and speed
> + * (even though it can be computed based on the fields of =
buf_layout)
> + */
> + u16 tx_headroom;
> + struct net_device *net_dev;
> + struct mac_device *mac_dev;
> + struct qman_fq *egress_fqs[DPAA_ETH_TX_QUEUES];
> + struct qman_fq *conf_fqs[DPAA_ETH_TX_QUEUES];
> +
> + size_t bp_count;
> +
> + u16 channel; /* "fsl,qman-channel-id" */
> + struct list_head dpa_fq_list;
> +
> + u32 msg_enable; /* net_device message level */
> +
> + struct {
> + /**
> + * All egress queues to a given net device belong to one
> + * (and the same) congestion group.
> + */
> + struct qman_cgr cgr;
> + } cgr_data;
> + /* Use a per-port CGR for ingress traffic. */
> + bool use_ingress_cgr;
> + struct qman_cgr ingress_cgr;
> +
> + struct dpa_buffer_layout_s *buf_layout;
> + u16 rx_headroom;
> +};
> +
> +struct fm_port_fqs {
> + struct dpa_fq *tx_defq;
> + struct dpa_fq *tx_errq;
> + struct dpa_fq *rx_defq;
> + struct dpa_fq *rx_errq;
> +};
> +
> +int dpa_bp_priv_seed(struct dpa_bp *dpa_bp);
> +int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *count_ptr);
> +void __hot _dpa_rx(struct net_device *net_dev,
> + struct qman_portal *portal,
> + const struct dpa_priv_s *priv,
> + struct dpa_percpu_priv_s *percpu_priv,
> + const struct qm_fd *fd,
> + u32 fqid,
> + int *count_ptr);
> +int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev);
> +struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
> + const struct qm_fd *fd);
> +
> +/* Turn on HW checksum computation for this outgoing frame.
> + * If the current protocol is not something we support in this regard
> + * (or if the stack has already computed the SW checksum), we do =
nothing.
> + *
> + * Returns 0 if all goes well (or HW csum doesn't apply), and a =
negative value
> + * otherwise.
> + *
> + * Note that this function may modify the fd->cmd field and the skb =
data buffer
> + * (the Parse Results area).
> + */
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv, struct sk_buff *skb,
> + struct qm_fd *fd, char *parse_results);
> +
> +static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv_s =
*percpu_priv,
> + struct qman_portal *portal)
> +{
> + /* In case of threaded ISR for RT enable kernel,
> + * in_irq() does not return appropriate value, so use
> + * in_serving_softirq to distinguish softirq or irq context.
> + */
> + if (unlikely(in_irq() || !in_serving_softirq())) {
> + /* Disable QMan IRQ and invoke NAPI */
> + int ret =3D qman_p_irqsource_remove(portal, =
QM_PIRQ_DQRI);
> +
> + if (likely(!ret)) {
> + const struct qman_portal_config *pc =3D
> + =
qman_p_get_portal_config(portal);
> + struct dpa_napi_portal *np =3D
> + &percpu_priv->np[pc->channel];
> +
> + np->p =3D portal;
> + napi_schedule(&np->napi);
> + return 1;
> + }
> + }
> + return 0;
> +}
> +
> +static inline ssize_t __const __must_check __attribute__((nonnull))
> +dpa_fd_length(const struct qm_fd *fd)
> +{
> + return fd->length20;
> +}
> +
> +static inline ssize_t __const __must_check __attribute__((nonnull))
> +dpa_fd_offset(const struct qm_fd *fd)
> +{
> + return fd->offset;
> +}
> +
> +/* Verifies if the skb length is below the interface MTU */
> +static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
> +{
> + if (unlikely(skb->len > mtu))
> + if ((skb->protocol !=3D ETH_P_8021Q) || (skb->len > mtu =
+ 4))
> + return -1;
> +
> + return 0;
> +}
> +
> +static inline u16 dpa_get_headroom(struct dpa_buffer_layout_s *bl)
> +{
> + u16 headroom;
> + /* The frame headroom must accommodate:
> + * - the driver private data area
> + * - parse results, hash results, timestamp if selected
> + * If either hash results or time stamp are selected, both will
> + * be copied to/from the frame headroom, as TS is located =
between PR and
> + * HR in the IC and IC copy size has a granularity of 16bytes
> + * (see description of FMBM_RICP and FMBM_TICP registers in =
DPAARM)
> + *
> + * Also make sure the headroom is a multiple of data_align bytes
> + */
> + headroom =3D (u16)(bl->priv_data_size +
> + (bl->parse_results ? DPA_PARSE_RESULTS_SIZE : 0) +
> + (bl->hash_results || bl->time_stamp ?
> + DPA_TIME_STAMP_SIZE + DPA_HASH_RESULTS_SIZE : 0));
> +
> + return bl->data_align ? ALIGN(headroom, bl->data_align) : =
headroom;
> +}
> +
> +
> +void dpa_private_napi_del(struct net_device *net_dev);
> +
> +static inline void clear_fd(struct qm_fd *fd)
> +{
> + fd->opaque_addr =3D 0;
> + fd->opaque =3D 0;
> + fd->cmd =3D 0;
> +}
> +
> +static inline struct qman_fq *_dpa_get_tx_conf_queue(
> + const struct dpa_priv_s *priv,
> + struct qman_fq *tx_fq)
> +{
> + int i;
> +
> + for (i =3D 0; i < DPAA_ETH_TX_QUEUES; i++)
> + if (priv->egress_fqs[i] =3D=3D tx_fq)
> + return priv->conf_fqs[i];
> +
> + return NULL;
> +}
> +
> +static inline int __hot dpa_xmit(struct dpa_priv_s *priv,
> + struct rtnl_link_stats64 *percpu_stats,
> + int queue,
> + struct qm_fd *fd)
Is there a reason this isnt just in the .c file?
> +{
> + int err, i;
> + struct qman_fq *egress_fq;
> +
> + egress_fq =3D priv->egress_fqs[queue];
> + if (fd->bpid =3D=3D 0xff)
> + fd->cmd |=3D qman_fq_fqid(
> + _dpa_get_tx_conf_queue(priv, egress_fq)
> + );
> +
> + for (i =3D 0; i < 100000; i++) {
> + err =3D qman_enqueue(egress_fq, fd, 0);
> + if (err !=3D -EBUSY)
> + break;
> + }
> +
> + if (unlikely(err < 0)) {
> + percpu_stats->tx_errors++;
> + percpu_stats->tx_fifo_errors++;
> + return err;
> + }
> +
> + percpu_stats->tx_packets++;
> + percpu_stats->tx_bytes +=3D dpa_fd_length(fd);
> +
> + return 0;
> +}
> +
> +/* Use multiple WQs for FQ assignment:
> + * - Tx Confirmation queues go to WQ1.
> + * - Rx Default and Tx queues go to WQ3 (no differentiation between
> + * Rx and Tx traffic).
> + * - Rx Error and Tx Error queues go to WQ2 (giving them a better =
chance
> + * to be scheduled, in case there are many more FQs in WQ3).
> + * This ensures that Tx-confirmed buffers are timely released. In =
particular,
> + * it avoids congestion on the Tx Confirm FQs, which can pile up =
PFDRs if they
> + * are greatly outnumbered by other FQs in the system, while
> + * dequeue scheduling is round-robin.
> + */
> +static inline void _dpa_assign_wq(struct dpa_fq *fq)
> +{
> + switch (fq->fq_type) {
> + case FQ_TYPE_TX_CONFIRM:
> + case FQ_TYPE_TX_CONF_MQ:
> + fq->wq =3D 1;
> + break;
> + case FQ_TYPE_RX_DEFAULT:
> + case FQ_TYPE_TX:
> + fq->wq =3D 3;
> + break;
> + case FQ_TYPE_RX_ERROR:
> + case FQ_TYPE_TX_ERROR:
> + fq->wq =3D 2;
> + break;
> + default:
> + WARN(1, "Invalid FQ type %d for FQID %d!\n",
> + fq->fq_type, fq->fqid);
> + }
> +}
> +
> +/* Use the queue selected by XPS */
> +#define dpa_get_queue_mapping(skb) \
> + skb_get_queue_mapping(skb)
> +
> +static inline void _dpa_bp_free_pf(void *addr)
> +{
> + put_page(virt_to_head_page(addr));
> +}
> +
> +#endif /* __DPA_H */
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c =
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> new file mode 100644
> index 0000000..7094a45
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
> @@ -0,0 +1,1288 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer in =
the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_net.h>
> +#include <linux/etherdevice.h>
> +#include <linux/kthread.h>
> +#include <linux/percpu.h>
> +#include <linux/highmem.h>
> +#include <linux/sort.h>
> +#include <soc/fsl/qman.h>
> +#include <linux/ip.h>
> +#include <linux/ipv6.h>
> +#include <linux/if_vlan.h> /* vlan_eth_hdr */
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +#include "mac.h"
> +
> +/* Size in bytes of the FQ taildrop threshold */
> +#define DPA_FQ_TD 0x200000
> +
> +static struct dpa_bp *dpa_bp_array[64];
> +
> +int dpa_max_frm;
> +EXPORT_SYMBOL(dpa_max_frm);
> +
> +int dpa_rx_extra_headroom;
> +EXPORT_SYMBOL(dpa_rx_extra_headroom);
> +
> +static const struct fqid_cell tx_confirm_fqids[] =3D {
> + {0, DPAA_ETH_TX_QUEUES}
> +};
> +
> +static const struct fqid_cell default_fqids[][3] =3D {
> + [RX] =3D { {0, 1}, {0, 1}, {0, DPAA_ETH_RX_QUEUES} },
> + [TX] =3D { {0, 1}, {0, 1}, {0, DPAA_ETH_TX_QUEUES} }
> +};
> +
> +int dpa_netdev_init(struct net_device *net_dev,
> + const u8 *mac_addr,
> + u16 tx_timeout)
> +{
> + int err;
> + struct dpa_priv_s *priv =3D netdev_priv(net_dev);
> + struct device *dev =3D net_dev->dev.parent;
> +
> + net_dev->priv_flags |=3D IFF_LIVE_ADDR_CHANGE;
> +
> + net_dev->features |=3D net_dev->hw_features;
> + net_dev->vlan_features =3D net_dev->features;
> +
> + memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
> + memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
> +
> + net_dev->needed_headroom =3D priv->tx_headroom;
> + net_dev->watchdog_timeo =3D msecs_to_jiffies(tx_timeout);
> +
> + err =3D register_netdev(net_dev);
> + if (err < 0) {
> + dev_err(dev, "register_netdev() =3D %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_netdev_init);
> +
> +int __cold dpa_start(struct net_device *net_dev)
> +{
> + int err, i;
> + struct dpa_priv_s *priv;
> + struct mac_device *mac_dev;
> +
> + priv =3D netdev_priv(net_dev);
> + mac_dev =3D priv->mac_dev;
> +
> + err =3D mac_dev->init_phy(net_dev, priv->mac_dev);
> + if (err < 0) {
> + if (netif_msg_ifup(priv))
> + netdev_err(net_dev, "init_phy() =3D %d\n", err);
> + return err;
> + }
> +
> + for_each_port_device(i, mac_dev->port_dev) {
> + err =3D fm_port_enable(mac_dev->port_dev[i]);
> + if (err)
> + goto mac_start_failed;
> + }
> +
> + err =3D priv->mac_dev->start(mac_dev);
> + if (err < 0) {
> + if (netif_msg_ifup(priv))
> + netdev_err(net_dev, "mac_dev->start() =3D %d\n", =
err);
> + goto mac_start_failed;
> + }
> +
> + netif_tx_start_all_queues(net_dev);
> +
> + return 0;
> +
> +mac_start_failed:
> + for_each_port_device(i, mac_dev->port_dev)
> + fm_port_disable(mac_dev->port_dev[i]);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_start);
> +
> +int __cold dpa_stop(struct net_device *net_dev)
> +{
> + int _errno, i, err;
> + struct dpa_priv_s *priv;
> + struct mac_device *mac_dev;
> +
> + priv =3D netdev_priv(net_dev);
> + mac_dev =3D priv->mac_dev;
> +
> + netif_tx_stop_all_queues(net_dev);
> + /* Allow the Fman (Tx) port to process in-flight frames before =
we
> + * try switching it off.
> + */
> + usleep_range(5000, 10000);
> +
> + _errno =3D mac_dev->stop(mac_dev);
> + if (unlikely(_errno < 0))
> + if (netif_msg_ifdown(priv))
> + netdev_err(net_dev, "mac_dev->stop() =3D %d\n",
> + _errno);
> +
> + for_each_port_device(i, mac_dev->port_dev) {
> + err =3D fm_port_disable(mac_dev->port_dev[i]);
> + _errno =3D err ? err : _errno;
> + }
> +
> + if (mac_dev->phy_dev)
> + phy_disconnect(mac_dev->phy_dev);
> + mac_dev->phy_dev =3D NULL;
> +
> + return _errno;
> +}
> +EXPORT_SYMBOL(dpa_stop);
> +
> +void __cold dpa_timeout(struct net_device *net_dev)
> +{
> + const struct dpa_priv_s *priv;
> + struct dpa_percpu_priv_s *percpu_priv;
> +
> + priv =3D netdev_priv(net_dev);
> + percpu_priv =3D raw_cpu_ptr(priv->percpu_priv);
> +
> + if (netif_msg_timer(priv))
> + netdev_crit(net_dev, "Transmit timeout latency: %u =
ms\n",
> + jiffies_to_msecs(jiffies - =
net_dev->trans_start));
> +
> + percpu_priv->stats.tx_errors++;
> +}
> +EXPORT_SYMBOL(dpa_timeout);
> +
> +/* net_device */
> +
> +/**
> + * @param net_dev the device for which statistics are calculated
> + * @param stats the function fills this structure with the device's =
statistics
> + * @return the address of the structure containing the statistics
> + *
> + * Calculates the statistics for the given device by adding the =
statistics
> + * collected by each CPU.
> + */
> +struct rtnl_link_stats64 * __cold
> +dpa_get_stats64(struct net_device *net_dev,
> + struct rtnl_link_stats64 *stats)
> +{
> + struct dpa_priv_s *priv =3D netdev_priv(net_dev);
> + u64 *cpustats;
> + u64 *netstats =3D (u64 *)stats;
> + int i, j;
> + struct dpa_percpu_priv_s *percpu_priv;
> + int numstats =3D sizeof(struct rtnl_link_stats64) / sizeof(u64);
> +
> + for_each_possible_cpu(i) {
> + percpu_priv =3D per_cpu_ptr(priv->percpu_priv, i);
> +
> + cpustats =3D (u64 *)&percpu_priv->stats;
> +
> + for (j =3D 0; j < numstats; j++)
> + netstats[j] +=3D cpustats[j];
> + }
> +
> + return stats;
> +}
> +EXPORT_SYMBOL(dpa_get_stats64);
> +
> +int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
> +{
> + const int max_mtu =3D dpa_get_max_mtu();
> +
> + /* Make sure we don't exceed the Ethernet controller's MAXFRM */
> + if (new_mtu < 68 || new_mtu > max_mtu) {
> + netdev_err(net_dev, "Invalid L3 mtu %d (must be between =
%d and %d).\n",
> + new_mtu, 68, max_mtu);
> + return -EINVAL;
> + }
> + net_dev->mtu =3D new_mtu;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_change_mtu);
> +
> +/* .ndo_init callback */
> +int dpa_ndo_init(struct net_device *net_dev)
> +{
> + /* If fsl_fm_max_frm is set to a higher value than the =
all-common 1500,
> + * we choose conservatively and let the user explicitly set a =
higher
> + * MTU via ifconfig. Otherwise, the user may end up with =
different MTUs
> + * in the same LAN.
> + * If on the other hand fsl_fm_max_frm has been chosen below =
1500,
> + * start with the maximum allowed.
> + */
> + int init_mtu =3D min(dpa_get_max_mtu(), ETH_DATA_LEN);
> +
> + pr_debug("Setting initial MTU on net device: %d\n", init_mtu);
> + net_dev->mtu =3D init_mtu;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_ndo_init);
> +
> +int dpa_set_features(struct net_device *dev, netdev_features_t =
features)
> +{
> + /* Not much to do here for now */
> + dev->features =3D features;
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_set_features);
> +
> +netdev_features_t dpa_fix_features(struct net_device *dev,
> + netdev_features_t features)
> +{
> + netdev_features_t unsupported_features =3D 0;
> +
> + /* In theory we should never be requested to enable features =
that
> + * we didn't set in netdev->features and netdev->hw_features at =
probe
> + * time, but double check just to be on the safe side.
> + * We don't support enabling Rx csum through ethtool yet
> + */
> + unsupported_features |=3D NETIF_F_RXCSUM;
> +
> + features &=3D ~unsupported_features;
> +
> + return features;
> +}
> +EXPORT_SYMBOL(dpa_fix_features);
> +
> +int __cold dpa_remove(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev;
> + struct net_device *net_dev;
> + struct dpa_priv_s *priv;
> +
> + dev =3D &pdev->dev;
> + net_dev =3D dev_get_drvdata(dev);
> +
> + priv =3D netdev_priv(net_dev);
> +
> + dev_set_drvdata(dev, NULL);
> + unregister_netdev(net_dev);
> +
> + err =3D dpa_fq_free(dev, &priv->dpa_fq_list);
> +
> + qman_delete_cgr_safe(&priv->ingress_cgr);
> + qman_release_cgrid(priv->ingress_cgr.cgrid);
> + qman_delete_cgr_safe(&priv->cgr_data.cgr);
> + qman_release_cgrid(priv->cgr_data.cgr.cgrid);
> +
> + dpa_private_napi_del(net_dev);
> +
> + dpa_bp_free(priv);
> +
> + if (priv->buf_layout)
> + devm_kfree(dev, priv->buf_layout);
> +
> + free_netdev(net_dev);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_remove);
> +
> +struct mac_device * __cold __must_check
> +__attribute__((nonnull))
> +dpa_mac_dev_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev, *dev;
> + struct device_node *mac_node;
> + struct platform_device *of_dev;
> + struct mac_device *mac_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev =3D &pdev->dev;
> + eth_data =3D dpa_dev->platform_data;
> + if (!eth_data)
> + return ERR_PTR(-ENODEV);
> +
> + mac_node =3D eth_data->mac_node;
> +
> + of_dev =3D of_find_device_by_node(mac_node);
> + if (unlikely(!of_dev)) {
> + dev_err(dpa_dev, "of_find_device_by_node(%s) failed\n",
> + mac_node->full_name);
> + of_node_put(mac_node);
> + return ERR_PTR(-EINVAL);
> + }
> + of_node_put(mac_node);
> +
> + dev =3D &of_dev->dev;
> +
> + mac_dev =3D dev_get_drvdata(dev);
> + if (unlikely(!mac_dev)) {
> + dev_err(dpa_dev, "dev_get_drvdata(%s) failed\n",
> + dev_name(dev));
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return mac_dev;
> +}
> +EXPORT_SYMBOL(dpa_mac_dev_get);
why is this exported?
> +
> +int dpa_mac_hw_index_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev =3D &pdev->dev;
> + eth_data =3D dpa_dev->platform_data;
> +
> + return eth_data->mac_hw_id;
> +}
> +
> +int dpa_mac_fman_index_get(struct platform_device *pdev)
> +{
> + struct device *dpa_dev;
> + struct dpaa_eth_data *eth_data;
> +
> + dpa_dev =3D &pdev->dev;
> + eth_data =3D dpa_dev->platform_data;
> +
> + return eth_data->fman_hw_id;
> +}
> +
> +int dpa_set_mac_address(struct net_device *net_dev, void *addr)
> +{
> + const struct dpa_priv_s *priv;
> + int _errno;
> + struct mac_device *mac_dev;
> +
> + priv =3D netdev_priv(net_dev);
> +
> + _errno =3D eth_mac_addr(net_dev, addr);
> + if (_errno < 0) {
> + if (netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "eth_mac_addr() =3D %d\n",
> + _errno);
> + return _errno;
> + }
> +
> + mac_dev =3D priv->mac_dev;
> +
> + _errno =3D =
mac_dev->change_addr(mac_dev->get_mac_handle(mac_dev),
> + (enet_addr_t *)net_dev->dev_addr);
> + if (_errno < 0) {
> + if (netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "mac_dev->change_addr() =3D %d\n",
> + _errno);
> + return _errno;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_set_mac_address);
> +
> +void dpa_set_rx_mode(struct net_device *net_dev)
> +{
> + int _errno;
> + const struct dpa_priv_s *priv;
> +
> + priv =3D netdev_priv(net_dev);
> +
> + if (!!(net_dev->flags & IFF_PROMISC) !=3D =
priv->mac_dev->promisc) {
> + priv->mac_dev->promisc =3D !priv->mac_dev->promisc;
> + _errno =3D priv->mac_dev->set_promisc(
> + =
priv->mac_dev->get_mac_handle(priv->mac_dev),
> + priv->mac_dev->promisc);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + netdev_err(net_dev,
> + "mac_dev->set_promisc() =3D %d\n",
> + _errno);
> + }
> +
> + _errno =3D priv->mac_dev->set_multi(net_dev, priv->mac_dev);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + netdev_err(net_dev, "mac_dev->set_multi() =3D %d\n", =
_errno);
> +}
> +EXPORT_SYMBOL(dpa_set_rx_mode);
> +
> +void dpa_set_buffers_layout(struct mac_device *mac_dev,
> + struct dpa_buffer_layout_s *layout)
> +{
> + struct fm_port_params params;
> +
> + /* Rx */
> + layout[RX].priv_data_size =3D (u16)DPA_RX_PRIV_DATA_SIZE;
> + layout[RX].parse_results =3D true;
> + layout[RX].hash_results =3D true;
> +
> + fm_port_get_buff_layout_ext_params(mac_dev->port_dev[RX], =
¶ms);
> + /* a value of zero for data alignment means "don't care", so =
align to
> + * a non-zero value to prevent FMD from using its own default
> + */
> + layout[RX].data_align =3D params.data_align ? : =
DPA_FD_DATA_ALIGNMENT;
> +
> + /* Tx */
> + layout[TX].priv_data_size =3D DPA_TX_PRIV_DATA_SIZE;
> + layout[TX].parse_results =3D true;
> + layout[TX].hash_results =3D true;
> +
> + fm_port_get_buff_layout_ext_params(mac_dev->port_dev[TX], =
¶ms);
> + layout[TX].data_align =3D params.data_align ? : =
DPA_FD_DATA_ALIGNMENT;
> +}
> +EXPORT_SYMBOL(dpa_set_buffers_layout);
> +
> +int __attribute__((nonnull))
> +dpa_bp_alloc(struct dpa_bp *dpa_bp)
> +{
> + int err;
> + struct bman_pool_params bp_params;
> + struct platform_device *pdev;
> +
> + if (dpa_bp->size =3D=3D 0 || dpa_bp->config_count =3D=3D 0) {
> + pr_err("Buffer pool is not properly initialized! Missing =
size or initial number of buffers");
> + return -EINVAL;
> + }
> +
> + memset(&bp_params, 0, sizeof(struct bman_pool_params));
> +
> + /* If the pool is already specified, we only create one per bpid =
*/
> + if (dpa_bpid2pool_use(dpa_bp->bpid))
> + return 0;
> +
> + if (dpa_bp->bpid =3D=3D 0)
> + bp_params.flags |=3D BMAN_POOL_FLAG_DYNAMIC_BPID;
> + else
> + bp_params.bpid =3D dpa_bp->bpid;
> +
> + dpa_bp->pool =3D bman_new_pool(&bp_params);
> + if (unlikely(!dpa_bp->pool)) {
> + pr_err("bman_new_pool() failed\n");
> + return -ENODEV;
> + }
> +
> + dpa_bp->bpid =3D (u8)bman_get_params(dpa_bp->pool)->bpid;
> +
> + pdev =3D platform_device_register_simple("DPAA_bpool",
> + dpa_bp->bpid, NULL, 0);
> + if (IS_ERR(pdev)) {
> + err =3D PTR_ERR(pdev);
> + goto pdev_register_failed;
> + }
> +
> + err =3D dma_set_mask(&pdev->dev, DMA_BIT_MASK(40));
> + if (err)
> + goto pdev_mask_failed;
> +
> + dpa_bp->dev =3D &pdev->dev;
> +
> + if (dpa_bp->seed_cb) {
> + err =3D dpa_bp->seed_cb(dpa_bp);
> + if (err)
> + goto pool_seed_failed;
> + }
> +
> + dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
> +
> + return 0;
> +
> +pool_seed_failed:
> +pdev_mask_failed:
> + platform_device_unregister(pdev);
> +pdev_register_failed:
> + bman_free_pool(dpa_bp->pool);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(dpa_bp_alloc);
> +
> +void dpa_bp_drain(struct dpa_bp *bp)
> +{
> + int ret;
> + u8 num =3D 8;
> +
> + do {
> + struct bm_buffer bmb[8];
> + int i;
> +
> + ret =3D bman_acquire(bp->pool, bmb, num, 0);
> + if (ret < 0) {
> + if (num =3D=3D 8) {
> + /* we have less than 8 buffers left;
> + * drain them one by one
> + */
> + num =3D 1;
> + ret =3D 1;
> + continue;
> + } else {
> + /* Pool is fully drained */
> + break;
> + }
> + }
> +
> + for (i =3D 0; i < num; i++) {
> + dma_addr_t addr =3D bm_buf_addr(&bmb[i]);
> +
> + dma_unmap_single(bp->dev, addr, bp->size,
> + DMA_BIDIRECTIONAL);
> +
> + bp->free_buf_cb(phys_to_virt(addr));
> + }
> + } while (ret > 0);
> +}
> +
> +static void __cold __attribute__((nonnull))
> +_dpa_bp_free(struct dpa_bp *dpa_bp)
> +{
> + struct dpa_bp *bp =3D dpa_bpid2pool(dpa_bp->bpid);
> +
> + /* the mapping between bpid and dpa_bp is done very late in the
> + * allocation procedure; if something failed before the mapping, =
the bp
> + * was not configured, therefore we don't need the below =
instructions
> + */
> + if (!bp)
> + return;
> +
> + if (!atomic_dec_and_test(&bp->refs))
> + return;
> +
> + if (bp->free_buf_cb)
> + dpa_bp_drain(bp);
> +
> + dpa_bp_array[bp->bpid] =3D NULL;
> + bman_free_pool(bp->pool);
> +
> + if (bp->dev)
> + platform_device_unregister(to_platform_device(bp->dev));
> +}
> +
> +void __cold __attribute__((nonnull))
> +dpa_bp_free(struct dpa_priv_s *priv)
> +{
> + int i;
> +
> + for (i =3D 0; i < priv->bp_count; i++)
> + _dpa_bp_free(&priv->dpa_bp[i]);
> +}
> +EXPORT_SYMBOL(dpa_bp_free);
> +
> +struct dpa_bp *dpa_bpid2pool(int bpid)
> +{
> + return dpa_bp_array[bpid];
> +}
> +EXPORT_SYMBOL(dpa_bpid2pool);
> +
> +void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp)
> +{
> + dpa_bp_array[bpid] =3D dpa_bp;
> + atomic_set(&dpa_bp->refs, 1);
> +}
> +
> +bool dpa_bpid2pool_use(int bpid)
> +{
> + if (dpa_bpid2pool(bpid)) {
> + atomic_inc(&dpa_bp_array[bpid]->refs);
> + return true;
> + }
> +
> + return false;
> +}
> +
> +struct dpa_fq *dpa_fq_alloc(struct device *dev,
> + const struct fqid_cell *fqids,
> + struct list_head *list,
> + enum dpa_fq_type fq_type)
> +{
> + int i;
> + struct dpa_fq *dpa_fq;
> +
> + dpa_fq =3D devm_kzalloc(dev, sizeof(*dpa_fq) * fqids->count, =
GFP_KERNEL);
> + if (!dpa_fq)
> + return NULL;
> +
> + for (i =3D 0; i < fqids->count; i++) {
> + dpa_fq[i].fq_type =3D fq_type;
> + dpa_fq[i].fqid =3D fqids->start ? fqids->start + i : 0;
> + list_add_tail(&dpa_fq[i].list, list);
> + }
> +
> + for (i =3D 0; i < fqids->count; i++)
> + _dpa_assign_wq(dpa_fq + i);
> +
> + return dpa_fq;
> +}
> +EXPORT_SYMBOL(dpa_fq_alloc);
> +
> +int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
> + struct fm_port_fqs *port_fqs,
> + bool alloc_tx_conf_fqs,
> + enum port_type ptype)
> +{
> + const struct fqid_cell *fqids;
> + struct dpa_fq *dpa_fq;
> + int num_ranges;
> + int i;
> +
> + if (ptype =3D=3D TX && alloc_tx_conf_fqs) {
> + if (!dpa_fq_alloc(dev, tx_confirm_fqids, list,
> + FQ_TYPE_TX_CONF_MQ))
> + goto fq_alloc_failed;
> + }
> +
> + fqids =3D default_fqids[ptype];
> + num_ranges =3D 3;
> +
> + for (i =3D 0; i < num_ranges; i++) {
> + switch (i) {
> + case 0:
> + /* The first queue is the error queue */
> + if (fqids[i].count !=3D 1)
> + goto invalid_error_queue;
> +
> + dpa_fq =3D dpa_fq_alloc(dev, &fqids[i], list,
> + ptype =3D=3D RX ?
> + FQ_TYPE_RX_ERROR :
> + FQ_TYPE_TX_ERROR);
> + if (!dpa_fq)
> + goto fq_alloc_failed;
> +
> + if (ptype =3D=3D RX)
> + port_fqs->rx_errq =3D &dpa_fq[0];
> + else
> + port_fqs->tx_errq =3D &dpa_fq[0];
> + break;
> + case 1:
> + /* the second queue is the default queue */
> + if (fqids[i].count !=3D 1)
> + goto invalid_default_queue;
> +
> + dpa_fq =3D dpa_fq_alloc(dev, &fqids[i], list,
> + ptype =3D=3D RX ?
> + FQ_TYPE_RX_DEFAULT :
> + FQ_TYPE_TX_CONFIRM);
> + if (!dpa_fq)
> + goto fq_alloc_failed;
> +
> + if (ptype =3D=3D RX)
> + port_fqs->rx_defq =3D &dpa_fq[0];
> + else
> + port_fqs->tx_defq =3D &dpa_fq[0];
> + break;
> + default:
> + /* all subsequent queues are Tx */
> + if (!dpa_fq_alloc(dev, &fqids[i], list, =
FQ_TYPE_TX))
> + goto fq_alloc_failed;
> + break;
> + }
> + }
> +
> + return 0;
> +
> +fq_alloc_failed:
> + dev_err(dev, "dpa_fq_alloc() failed\n");
> + return -ENOMEM;
> +
> +invalid_default_queue:
> +invalid_error_queue:
> + dev_err(dev, "Too many default or error queues\n");
> + return -EINVAL;
> +}
> +EXPORT_SYMBOL(dpa_fq_probe_mac);
> +
> +static u32 rx_pool_channel;
> +static DEFINE_SPINLOCK(rx_pool_channel_init);
> +
> +int dpa_get_channel(void)
> +{
> + spin_lock(&rx_pool_channel_init);
> + if (!rx_pool_channel) {
> + u32 pool;
> + int ret =3D qman_alloc_pool(&pool);
> +
> + if (!ret)
> + rx_pool_channel =3D pool;
> + }
> + spin_unlock(&rx_pool_channel_init);
> + if (!rx_pool_channel)
> + return -ENOMEM;
> + return rx_pool_channel;
> +}
> +EXPORT_SYMBOL(dpa_get_channel);
> +
> +void dpa_release_channel(void)
> +{
> + qman_release_pool(rx_pool_channel);
> +}
> +EXPORT_SYMBOL(dpa_release_channel);
> +
> +int dpaa_eth_add_channel(void *__arg)
> +{
> + const cpumask_t *cpus =3D qman_affine_cpus();
> + u32 pool =3D QM_SDQCR_CHANNELS_POOL_CONV((u16)(unsigned =
long)__arg);
> + int cpu;
> + struct qman_portal *portal;
> +
> + for_each_cpu(cpu, cpus) {
> + portal =3D (struct qman_portal =
*)qman_get_affine_portal(cpu);
> + qman_p_static_dequeue_add(portal, pool);
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(dpaa_eth_add_channel);
> +
> +/**
> + * Congestion group state change notification callback.
> + * Stops the device's egress queues while they are congested and
> + * wakes them upon exiting congested state.
> + * Also updates some CGR-related stats.
> + */
> +static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr =
*cgr,
> + int congested)
> +{
> + struct dpa_priv_s *priv =3D (struct dpa_priv_s =
*)container_of(cgr,
> + struct dpa_priv_s, cgr_data.cgr);
> +
> + if (congested)
> + netif_tx_stop_all_queues(priv->net_dev);
> + else
> + netif_tx_wake_all_queues(priv->net_dev);
> +}
> +
> +int dpaa_eth_cgr_init(struct dpa_priv_s *priv)
> +{
> + struct qm_mcc_initcgr initcgr;
> + u32 cs_th;
> + int err;
> +
> + err =3D qman_alloc_cgrid(&priv->cgr_data.cgr.cgrid);
> + if (err < 0) {
> + pr_err("Error %d allocating CGR ID\n", err);
> + goto out_error;
> + }
> + priv->cgr_data.cgr.cb =3D dpaa_eth_cgscn;
> +
> + /* Enable Congestion State Change Notifications and CS taildrop =
*/
> + initcgr.we_mask =3D QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES;
> + initcgr.cgr.cscn_en =3D QM_CGR_EN;
> +
> + /* Set different thresholds based on the MAC speed.
> + * This may turn suboptimal if the MAC is reconfigured at a =
speed
> + * lower than its max, e.g. if a dTSEC later negotiates a =
100Mbps link.
> + * In such cases, we ought to reconfigure the threshold, too.
> + */
> + if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
> + cs_th =3D CONFIG_FSL_DPAA_CS_THRESHOLD_10G;
> + else
> + cs_th =3D CONFIG_FSL_DPAA_CS_THRESHOLD_1G;
> + qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
> +
> + initcgr.we_mask |=3D QM_CGR_WE_CSTD_EN;
> + initcgr.cgr.cstd_en =3D QM_CGR_EN;
> +
> + err =3D qman_create_cgr(&priv->cgr_data.cgr, =
QMAN_CGR_FLAG_USE_INIT,
> + &initcgr);
> + if (err < 0) {
> + pr_err("Error %d creating CGR with ID %d\n", err,
> + priv->cgr_data.cgr.cgrid);
> + qman_release_cgrid(priv->cgr_data.cgr.cgrid);
> + goto out_error;
> + }
> + pr_debug("Created CGR %d for netdev with hwaddr %pM on QMan =
channel %d\n",
> + priv->cgr_data.cgr.cgrid, priv->mac_dev->addr,
> + priv->cgr_data.cgr.chan);
> +
> +out_error:
> + return err;
> +}
> +EXPORT_SYMBOL(dpaa_eth_cgr_init);
> +
> +static inline void dpa_setup_ingress(const struct dpa_priv_s *priv,
> + struct dpa_fq *fq,
> + const struct qman_fq *template)
> +{
> + fq->fq_base =3D *template;
> + fq->net_dev =3D priv->net_dev;
> +
> + fq->flags =3D QMAN_FQ_FLAG_NO_ENQUEUE;
> + fq->channel =3D priv->channel;
> +}
> +
> +static inline void dpa_setup_egress(const struct dpa_priv_s *priv,
> + struct dpa_fq *fq,
> + struct fm_port *port,
> + const struct qman_fq *template)
> +{
> + fq->fq_base =3D *template;
> + fq->net_dev =3D priv->net_dev;
> +
> + if (port) {
> + fq->flags =3D QMAN_FQ_FLAG_TO_DCPORTAL;
> + fq->channel =3D (u16)fm_get_tx_port_channel(port);
> + } else {
> + fq->flags =3D QMAN_FQ_FLAG_NO_MODIFY;
> + }
> +}
> +
> +void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t =
*fq_cbs,
> + struct fm_port *tx_port)
> +{
> + struct dpa_fq *fq;
> + u16 portals[NR_CPUS];
> + int cpu, num_portals =3D 0;
> + const cpumask_t *affine_cpus =3D qman_affine_cpus();
> + int egress_cnt =3D 0, conf_cnt =3D 0;
> +
> + for_each_cpu(cpu, affine_cpus)
> + portals[num_portals++] =3D qman_affine_channel(cpu);
> + if (num_portals =3D=3D 0)
> + dev_err(priv->net_dev->dev.parent,
> + "No Qman software (affine) channels found");
> +
> + /* Initialize each FQ in the list */
> + list_for_each_entry(fq, &priv->dpa_fq_list, list) {
> + switch (fq->fq_type) {
> + case FQ_TYPE_RX_DEFAULT:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
> + break;
> + case FQ_TYPE_RX_ERROR:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->rx_errq);
> + break;
> + case FQ_TYPE_TX:
> + dpa_setup_egress(priv, fq, tx_port,
> + &fq_cbs->egress_ern);
> + /* If we have more Tx queues than the number of =
cores,
> + * just ignore the extra ones.
> + */
> + if (egress_cnt < DPAA_ETH_TX_QUEUES)
> + priv->egress_fqs[egress_cnt++] =3D =
&fq->fq_base;
> + break;
> + case FQ_TYPE_TX_CONFIRM:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
> + break;
> + case FQ_TYPE_TX_CONF_MQ:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
> + priv->conf_fqs[conf_cnt++] =3D &fq->fq_base;
> + break;
> + case FQ_TYPE_TX_ERROR:
> + BUG_ON(!priv->mac_dev);
> + dpa_setup_ingress(priv, fq, &fq_cbs->tx_errq);
> + break;
> + default:
> + dev_warn(priv->net_dev->dev.parent,
> + "Unknown FQ type detected!\n");
> + break;
> + }
> + }
> +
> + /* The number of Tx queues may be smaller than the number of =
cores, if
> + * the Tx queue range is specified in the device tree instead of =
being
> + * dynamically allocated.
> + * Make sure all CPUs receive a corresponding Tx queue.
> + */
> + while (egress_cnt < DPAA_ETH_TX_QUEUES) {
> + list_for_each_entry(fq, &priv->dpa_fq_list, list) {
> + if (fq->fq_type !=3D FQ_TYPE_TX)
> + continue;
> + priv->egress_fqs[egress_cnt++] =3D &fq->fq_base;
> + if (egress_cnt =3D=3D DPAA_ETH_TX_QUEUES)
> + break;
> + }
> + }
> +}
> +EXPORT_SYMBOL(dpa_fq_setup);
> +
> +int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable)
> +{
> + int _errno;
> + const struct dpa_priv_s *priv;
> + struct device *dev;
> + struct qman_fq *fq;
> + struct qm_mcc_initfq initfq;
> + struct qman_fq *confq;
> +
> + priv =3D netdev_priv(dpa_fq->net_dev);
> + dev =3D dpa_fq->net_dev->dev.parent;
> +
> + if (dpa_fq->fqid =3D=3D 0)
> + dpa_fq->flags |=3D QMAN_FQ_FLAG_DYNAMIC_FQID;
> +
> + dpa_fq->init =3D !(dpa_fq->flags & QMAN_FQ_FLAG_NO_MODIFY);
> +
> + _errno =3D qman_create_fq(dpa_fq->fqid, dpa_fq->flags, =
&dpa_fq->fq_base);
> + if (_errno) {
> + dev_err(dev, "qman_create_fq() failed\n");
> + return _errno;
> + }
> + fq =3D &dpa_fq->fq_base;
> +
> + if (dpa_fq->init) {
> + initfq.we_mask =3D QM_INITFQ_WE_FQCTRL;
> + /* FIXME: why would we want to keep an empty FQ in =
cache? */
> + initfq.fqd.fq_ctrl =3D QM_FQCTRL_PREFERINCACHE;
> +
> + /* Try to reduce the number of portal interrupts for
> + * Tx Confirmation FQs.
> + */
> + if (dpa_fq->fq_type =3D=3D FQ_TYPE_TX_CONFIRM)
> + initfq.fqd.fq_ctrl |=3D QM_FQCTRL_HOLDACTIVE;
> +
> + /* FQ placement */
> + initfq.we_mask |=3D QM_INITFQ_WE_DESTWQ;
> +
> + initfq.fqd.dest.channel =3D dpa_fq->channel;
> + initfq.fqd.dest.wq =3D dpa_fq->wq;
> +
> + /* Put all egress queues in a congestion group of their =
own.
> + * Sensu stricto, the Tx confirmation queues are Rx FQs,
> + * rather than Tx - but they nonetheless account for the
> + * memory footprint on behalf of egress traffic. We =
therefore
> + * place them in the netdev's CGR, along with the Tx =
FQs.
> + */
> + if (dpa_fq->fq_type =3D=3D FQ_TYPE_TX ||
> + dpa_fq->fq_type =3D=3D FQ_TYPE_TX_CONFIRM ||
> + dpa_fq->fq_type =3D=3D FQ_TYPE_TX_CONF_MQ) {
> + initfq.we_mask |=3D QM_INITFQ_WE_CGID;
> + initfq.fqd.fq_ctrl |=3D QM_FQCTRL_CGE;
> + initfq.fqd.cgid =3D =
(u8)priv->cgr_data.cgr.cgrid;
> + /* Set a fixed overhead accounting, in an =
attempt to
> + * reduce the impact of fixed-size skb shells =
and the
> + * driver's needed headroom on system memory. =
This is
> + * especially the case when the egress traffic =
is
> + * composed of small datagrams.
> + * Unfortunately, QMan's OAL value is capped to =
an
> + * insufficient value, but even that is better =
than
> + * no overhead accounting at all.
> + */
> + initfq.we_mask |=3D QM_INITFQ_WE_OAC;
> + initfq.fqd.oac_init.oac =3D QM_OAC_CG;
> + initfq.fqd.oac_init.oal =3D
> + (signed char)(min(sizeof(struct sk_buff) =
+
> + priv->tx_headroom,
> + =
(size_t)FSL_QMAN_MAX_OAL));
> + }
> +
> + if (td_enable) {
> + initfq.we_mask |=3D QM_INITFQ_WE_TDTHRESH;
> + qm_fqd_taildrop_set(&initfq.fqd.td,
> + DPA_FQ_TD, 1);
> + initfq.fqd.fq_ctrl =3D QM_FQCTRL_TDE;
> + }
> +
> + /* Configure the Tx confirmation queue, now that we know
> + * which Tx queue it pairs with.
> + */
> + if (dpa_fq->fq_type =3D=3D FQ_TYPE_TX) {
> + confq =3D _dpa_get_tx_conf_queue(priv, =
&dpa_fq->fq_base);
> + if (confq) {
> + initfq.we_mask |=3D =
QM_INITFQ_WE_CONTEXTA;
> + /* ContextA: OVOM=3D1 (use contextA2 bits =
instead of ICAD)
> + * A2V=3D1 (contextA A2 field is =
valid)
> + * A0V=3D1 (contextA A0 field is =
valid)
> + * ContextA A2: EBD=3D1 (deallocate buffers =
inside FMan)
> + */
> + initfq.fqd.context_a.hi =3D 0x1a000000;
> + initfq.fqd.context_a.lo =3D 0x80000000;
> + }
> + }
> +
> + /* Put all *private* ingress queues in our "ingress =
CGR". */
> + if (priv->use_ingress_cgr &&
> + (dpa_fq->fq_type =3D=3D FQ_TYPE_RX_DEFAULT ||
> + dpa_fq->fq_type =3D=3D FQ_TYPE_RX_ERROR)) {
> + initfq.we_mask |=3D QM_INITFQ_WE_CGID;
> + initfq.fqd.fq_ctrl |=3D QM_FQCTRL_CGE;
> + initfq.fqd.cgid =3D (u8)priv->ingress_cgr.cgrid;
> + /* Set a fixed overhead accounting, just like =
for the
> + * egress CGR.
> + */
> + initfq.we_mask |=3D QM_INITFQ_WE_OAC;
> + initfq.fqd.oac_init.oac =3D QM_OAC_CG;
> + initfq.fqd.oac_init.oal =3D
> + (signed char)(min(sizeof(struct sk_buff) =
+
> + priv->tx_headroom, =
(size_t)FSL_QMAN_MAX_OAL));
> + }
> +
> + /* Initialization common to all ingress queues */
> + if (dpa_fq->flags & QMAN_FQ_FLAG_NO_ENQUEUE) {
> + initfq.we_mask |=3D QM_INITFQ_WE_CONTEXTA;
> + initfq.fqd.fq_ctrl |=3D
> + QM_FQCTRL_CTXASTASHING | =
QM_FQCTRL_AVOIDBLOCK;
> + initfq.fqd.context_a.stashing.exclusive =3D
> + QM_STASHING_EXCL_DATA | =
QM_STASHING_EXCL_CTX |
> + QM_STASHING_EXCL_ANNOTATION;
> + initfq.fqd.context_a.stashing.data_cl =3D 2;
> + initfq.fqd.context_a.stashing.annotation_cl =3D =
1;
> + initfq.fqd.context_a.stashing.context_cl =3D
> + DIV_ROUND_UP(sizeof(struct qman_fq), =
64);
> + }
> +
> + _errno =3D qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, =
&initfq);
> + if (_errno < 0) {
> + dev_err(dev, "qman_init_fq(%u) =3D %d\n",
> + qman_fq_fqid(fq), _errno);
> + qman_destroy_fq(fq, 0);
> + return _errno;
> + }
> + }
> +
> + dpa_fq->fqid =3D qman_fq_fqid(fq);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_fq_init);
> +
> +static int __cold __attribute__((nonnull))
> +_dpa_fq_free(struct device *dev, struct qman_fq *fq)
> +{
> + int _errno, __errno;
> + struct dpa_fq *dpa_fq;
> + const struct dpa_priv_s *priv;
> +
> + _errno =3D 0;
> +
> + dpa_fq =3D container_of(fq, struct dpa_fq, fq_base);
> + priv =3D netdev_priv(dpa_fq->net_dev);
> +
> + if (dpa_fq->init) {
> + _errno =3D qman_retire_fq(fq, NULL);
> + if (unlikely(_errno < 0) && netif_msg_drv(priv))
> + dev_err(dev, "qman_retire_fq(%u) =3D %d\n",
> + qman_fq_fqid(fq), _errno);
> +
> + __errno =3D qman_oos_fq(fq);
> + if (unlikely(__errno < 0) && netif_msg_drv(priv)) {
> + dev_err(dev, "qman_oos_fq(%u) =3D %d\n",
> + qman_fq_fqid(fq), __errno);
> + if (_errno >=3D 0)
> + _errno =3D __errno;
> + }
> + }
> +
> + qman_destroy_fq(fq, 0);
> + list_del(&dpa_fq->list);
> +
> + return _errno;
> +}
> +
> +int __cold __attribute__((nonnull))
> +dpa_fq_free(struct device *dev, struct list_head *list)
> +{
> + int _errno, __errno;
> + struct dpa_fq *dpa_fq, *tmp;
> +
> + _errno =3D 0;
> + list_for_each_entry_safe(dpa_fq, tmp, list, list) {
> + __errno =3D _dpa_fq_free(dev, (struct qman_fq *)dpa_fq);
> + if (unlikely(__errno < 0) && _errno >=3D 0)
> + _errno =3D __errno;
> + }
> +
> + return _errno;
> +}
> +EXPORT_SYMBOL(dpa_fq_free);
> +
> +static void
> +dpaa_eth_init_tx_port(struct fm_port *port, struct dpa_fq *errq,
> + struct dpa_fq *defq,
> + struct dpa_buffer_layout_s *buf_layout)
> +{
> + struct fm_port_params tx_port_param;
> +
> + memset(&tx_port_param, 0, sizeof(tx_port_param));
> + dpaa_eth_init_port(tx, port, tx_port_param, errq->fqid, =
defq->fqid,
> + buf_layout, false);
> +}
> +
> +static void
> +dpaa_eth_init_rx_port(struct fm_port *port, struct dpa_bp *bp, size_t =
count,
> + struct dpa_fq *errq, struct dpa_fq *defq,
> + struct dpa_buffer_layout_s *buf_layout)
> +{
> + struct fm_port_params rx_port_param;
> + int i;
> +
> + memset(&rx_port_param, 0, sizeof(rx_port_param));
> + count =3D min(ARRAY_SIZE(rx_port_param.pool_param), count);
> + rx_port_param.num_pools =3D (u8)count;
> + for (i =3D 0; i < count; i++) {
> + if (i >=3D rx_port_param.num_pools)
> + break;
> + rx_port_param.pool_param[i].id =3D bp[i].bpid;
> + rx_port_param.pool_param[i].size =3D (u16)bp[i].size;
> + }
> +
> + dpaa_eth_init_port(rx, port, rx_port_param, errq->fqid, =
defq->fqid,
> + buf_layout, false);
> +}
> +
> +void dpaa_eth_init_ports(struct mac_device *mac_dev,
> + struct dpa_bp *bp, size_t count,
> + struct fm_port_fqs *port_fqs,
> + struct dpa_buffer_layout_s *buf_layout,
> + struct device *dev)
> +{
> + struct fm_port *rxport =3D mac_dev->port_dev[RX];
> + struct fm_port *txport =3D mac_dev->port_dev[TX];
> +
> + dpaa_eth_init_tx_port(txport, port_fqs->tx_errq,
> + port_fqs->tx_defq, &buf_layout[TX]);
> + dpaa_eth_init_rx_port(rxport, bp, count, port_fqs->rx_errq,
> + port_fqs->rx_defq, &buf_layout[RX]);
> +}
> +EXPORT_SYMBOL(dpaa_eth_init_ports);
> +
> +void __attribute__((nonnull))
> +dpa_fd_release(const struct net_device *net_dev, const struct qm_fd =
*fd)
> +{
> + struct dpa_bp *_dpa_bp;
> + struct bm_buffer _bmb;
> +
> + _bmb.hi =3D fd->addr_hi;
> + _bmb.lo =3D fd->addr_lo;
> +
> + _dpa_bp =3D dpa_bpid2pool(fd->bpid);
> + DPA_ERR_ON(!_dpa_bp);
> +
> + DPA_ERR_ON(fd->format =3D=3D qm_fd_sg);
> +
> + while (bman_release(_dpa_bp->pool, &_bmb, 1, 0))
> + cpu_relax();
> +}
> +EXPORT_SYMBOL(dpa_fd_release);
> +
> +/**
> + * Turn on HW checksum computation for this outgoing frame.
> + * If the current protocol is not something we support in this regard
> + * (or if the stack has already computed the SW checksum), we do =
nothing.
> + *
> + * Returns 0 if all goes well (or HW csum doesn't apply), and a =
negative value
> + * otherwise.
> + *
> + * Note that this function may modify the fd->cmd field and the skb =
data buffer
> + * (the Parse Results area).
> + */
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv,
> + struct sk_buff *skb,
> + struct qm_fd *fd,
> + char *parse_results)
> +{
> + fm_prs_result *parse_result;
> + struct iphdr *iph;
> + struct ipv6hdr *ipv6h =3D NULL;
> + int l4_proto;
> + int ethertype =3D ntohs(skb->protocol);
> + int retval =3D 0;
> +
> + if (skb->ip_summed !=3D CHECKSUM_PARTIAL)
> + return 0;
> +
> + /* Note: L3 csum seems to be already computed in sw, but we =
can't choose
> + * L4 alone from the FM configuration anyway.
> + */
> +
> + /* Fill in some fields of the Parse Results array, so the FMan
> + * can find them as if they came from the FMan Parser.
> + */
> + parse_result =3D (fm_prs_result *)parse_results;
> +
> + /* If we're dealing with VLAN, get the real Ethernet type */
> + if (ethertype =3D=3D ETH_P_8021Q) {
> + /* We can't always assume the MAC header is set =
correctly
> + * by the stack, so reset to beginning of skb->data
> + */
> + skb_reset_mac_header(skb);
> + ethertype =3D =
ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
> + }
> +
> + /* Fill in the relevant L3 parse result fields
> + * and read the L4 protocol type
> + */
> + switch (ethertype) {
> + case ETH_P_IP:
> + parse_result->l3r =3D FM_L3_PARSE_RESULT_IPV4;
> + iph =3D ip_hdr(skb);
> + DPA_ERR_ON(!iph);
> + l4_proto =3D ntohs(iph->protocol);
> + break;
> + case ETH_P_IPV6:
> + parse_result->l3r =3D FM_L3_PARSE_RESULT_IPV6;
> + ipv6h =3D ipv6_hdr(skb);
> + DPA_ERR_ON(!ipv6h);
> + l4_proto =3D ntohs(ipv6h->nexthdr);
> + break;
> + default:
> + /* We shouldn't even be here */
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_alert(priv->net_dev,
> + "Can't compute HW csum for L3 proto =
0x%x\n",
> + ntohs(skb->protocol));
> + retval =3D -EIO;
> + goto return_error;
> + }
> +
> + /* Fill in the relevant L4 parse result fields */
> + switch (l4_proto) {
> + case IPPROTO_UDP:
> + parse_result->l4r =3D FM_L4_PARSE_RESULT_UDP;
> + break;
> + case IPPROTO_TCP:
> + parse_result->l4r =3D FM_L4_PARSE_RESULT_TCP;
> + break;
> + default:
> + /* This can as well be a BUG() */
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_alert(priv->net_dev,
> + "Can't compute HW csum for L4 proto =
0x%x\n",
> + l4_proto);
> + retval =3D -EIO;
> + goto return_error;
> + }
> +
> + /* At index 0 is IPOffset_1 as defined in the Parse Results */
> + parse_result->ip_off[0] =3D (u8)skb_network_offset(skb);
> + parse_result->l4_off =3D (u8)skb_transport_offset(skb);
> +
> + /* Enable L3 (and L4, if TCP or UDP) HW checksum. */
> + fd->cmd |=3D FM_FD_CMD_RPD | FM_FD_CMD_DTC;
> +
> + /* On P1023 and similar platforms fd->cmd interpretation could
> + * be disabled by setting CONTEXT_A bit ICMD; currently this bit
> + * is not set so we do not need to check; in the future, if/when
> + * using context_a we need to check this bit
> + */
> +
> +return_error:
> + return retval;
> +}
> +EXPORT_SYMBOL(dpa_enable_tx_csum);
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h =
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> new file mode 100644
> index 0000000..96bc63e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
> @@ -0,0 +1,119 @@
> +/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer in =
the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef __DPAA_ETH_COMMON_H
> +#define __DPAA_ETH_COMMON_H
> +
> +#include <linux/etherdevice.h> /* struct net_device */
> +#include <soc/fsl/bman.h> /* struct bm_buffer */
> +#include <linux/of_platform.h> /* struct platform_device */
> +#include <linux/net_tstamp.h> /* struct hwtstamp_config */
> +
> +#include "dpaa_eth.h"
> +#include "fsl_fman_drv.h"
> +
> +#define dpaa_eth_init_port(type, port, param, errq_id, defq_id, =
buf_layout,\
> + frag_enabled) \
> +{ \
> + param.errq =3D errq_id; \
> + param.defq =3D defq_id; \
> + param.priv_data_size =3D buf_layout->priv_data_size; \
> + param.parse_results =3D buf_layout->parse_results; \
> + param.hash_results =3D buf_layout->hash_results; \
> + param.time_stamp =3D buf_layout->time_stamp; \
> + param.data_align =3D buf_layout->data_align; \
> + fm_set_##type##_port_params(port, ¶m); \
> +}
> +
> +#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released =
at once */
> +
> +/* used in napi related functions */
> +extern u16 qman_portal_max;
> +
> +int dpa_netdev_init(struct net_device *net_dev,
> + const u8 *mac_addr,
> + u16 tx_timeout);
> +int __cold dpa_start(struct net_device *net_dev);
> +int __cold dpa_stop(struct net_device *net_dev);
> +void __cold dpa_timeout(struct net_device *net_dev);
> +struct rtnl_link_stats64 * __cold
> +dpa_get_stats64(struct net_device *net_dev,
> + struct rtnl_link_stats64 *stats);
> +int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
> +int dpa_ndo_init(struct net_device *net_dev);
> +int dpa_set_features(struct net_device *dev, netdev_features_t =
features);
> +netdev_features_t dpa_fix_features(struct net_device *dev,
> + netdev_features_t features);
> +int __cold dpa_remove(struct platform_device *pdev);
> +struct mac_device * __cold __must_check
> +__attribute__((nonnull)) dpa_mac_dev_get(struct platform_device =
*pdev);
> +int dpa_mac_hw_index_get(struct platform_device *pdev);
> +int dpa_mac_fman_index_get(struct platform_device *pdev);
> +int dpa_set_mac_address(struct net_device *net_dev, void *addr);
> +void dpa_set_rx_mode(struct net_device *net_dev);
> +void dpa_set_buffers_layout(struct mac_device *mac_dev,
> + struct dpa_buffer_layout_s *layout);
> +int __attribute__((nonnull))
> +dpa_bp_alloc(struct dpa_bp *dpa_bp);
> +void __cold __attribute__((nonnull))
> +dpa_bp_free(struct dpa_priv_s *priv);
> +struct dpa_bp *dpa_bpid2pool(int bpid);
> +void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
> +bool dpa_bpid2pool_use(int bpid);
> +void dpa_bp_drain(struct dpa_bp *bp);
> +struct dpa_fq *dpa_fq_alloc(struct device *dev,
> + const struct fqid_cell *fqids,
> + struct list_head *list,
> + enum dpa_fq_type fq_type);
> +int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
> + struct fm_port_fqs *port_fqs,
> + bool tx_conf_fqs_per_core,
> + enum port_type ptype);
> +int dpa_get_channel(void);
> +void dpa_release_channel(void);
> +int dpaa_eth_add_channel(void *__arg);
> +int dpaa_eth_cgr_init(struct dpa_priv_s *priv);
> +void dpa_fq_setup(struct dpa_priv_s *priv, const struct dpa_fq_cbs_t =
*fq_cbs,
> + struct fm_port *tx_port);
> +int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable);
> +int __cold __attribute__((nonnull))
> +dpa_fq_free(struct device *dev, struct list_head *list);
> +void dpaa_eth_init_ports(struct mac_device *mac_dev,
> + struct dpa_bp *bp, size_t count,
> + struct fm_port_fqs *port_fqs,
> + struct dpa_buffer_layout_s *buf_layout,
> + struct device *dev);
> +void __attribute__((nonnull))
> +dpa_fd_release(const struct net_device *net_dev, const struct qm_fd =
*fd);
> +int dpa_enable_tx_csum(struct dpa_priv_s *priv,
> + struct sk_buff *skb,
> + struct qm_fd *fd,
> + char *parse_results);
> +#endif /* __DPAA_ETH_COMMON_H */
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c =
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
> new file mode 100644
> index 0000000..ef3117e
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
> @@ -0,0 +1,428 @@
> +/* Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer in =
the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#define pr_fmt(fmt) \
> + KBUILD_MODNAME ": " fmt
> +
> +#include <linux/init.h>
> +#include <linux/skbuff.h>
> +#include <linux/highmem.h>
> +#include <soc/fsl/bman.h>
> +
> +#include "dpaa_eth.h"
> +#include "dpaa_eth_common.h"
> +
> +/* Convenience macros for storing/retrieving the skb back-pointers.
> + *
> + * NB: @off is an offset from a (struct sk_buff **) pointer!
> + */
> +#define DPA_WRITE_SKB_PTR(skb, skbh, addr, off) \
> + { \
> + skbh =3D (struct sk_buff **)addr; \
> + *(skbh + (off)) =3D skb; \
> + }
> +#define DPA_READ_SKB_PTR(skb, skbh, addr, off) \
> + { \
> + skbh =3D (struct sk_buff **)addr; \
> + skb =3D *(skbh + (off)); \
> + }
> +
> +static int _dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
> +{
> + struct bm_buffer bmb[8];
> + void *new_buf;
> + dma_addr_t addr;
> + u8 i;
> + struct device *dev =3D dpa_bp->dev;
> + struct sk_buff *skb, **skbh;
> +
> + for (i =3D 0; i < 8; i++) {
> + /* We'll prepend the skb back-pointer; can't use the DPA
> + * priv space, because FMan will overwrite it (from =
offset 0)
> + * if it ends up being the second, third, etc. fragment
> + * in a S/G frame.
> + *
> + * We only need enough space to store a pointer, but =
allocate
> + * an entire cacheline for performance reasons.
> + */
> + new_buf =3D netdev_alloc_frag(SMP_CACHE_BYTES + =
DPA_BP_RAW_SIZE);
> + if (unlikely(!new_buf))
> + goto netdev_alloc_failed;
> + new_buf =3D PTR_ALIGN(new_buf + SMP_CACHE_BYTES, =
SMP_CACHE_BYTES);
> +
> + skb =3D build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
> + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
> + if (unlikely(!skb)) {
> + put_page(virt_to_head_page(new_buf));
> + goto build_skb_failed;
> + }
> + DPA_WRITE_SKB_PTR(skb, skbh, new_buf, -1);
> +
> + addr =3D dma_map_single(dev, new_buf,
> + dpa_bp->size, DMA_BIDIRECTIONAL);
> + if (unlikely(dma_mapping_error(dev, addr)))
> + goto dma_map_failed;
> +
> + bm_buffer_set64(&bmb[i], addr);
> + }
> +
> +release_bufs:
> + /* Release the buffers. In case bman is busy, keep trying
> + * until successful. bman_release() is guaranteed to succeed
> + * in a reasonable amount of time
> + */
> + while (unlikely(bman_release(dpa_bp->pool, bmb, i, 0)))
> + cpu_relax();
> + return i;
> +
> +dma_map_failed:
> + kfree_skb(skb);
> +
> +build_skb_failed:
> +netdev_alloc_failed:
> + net_err_ratelimited("dpa_bp_add_8_bufs() failed\n");
> + WARN_ONCE(1, "Memory allocation failure on Rx\n");
> +
> + bm_buffer_set64(&bmb[i], 0);
> + /* Avoid releasing a completely null buffer; bman_release() =
requires
> + * at least one buffer.
> + */
> + if (likely(i))
> + goto release_bufs;
> +
> + return 0;
> +}
> +
> +/* Cold path wrapper over _dpa_bp_add_8_bufs(). */
> +static void dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp, int cpu)
> +{
> + int *count_ptr =3D per_cpu_ptr(dpa_bp->percpu_count, cpu);
> + *count_ptr +=3D _dpa_bp_add_8_bufs(dpa_bp);
> +}
> +
> +int dpa_bp_priv_seed(struct dpa_bp *dpa_bp)
> +{
> + int i;
> +
> + /* Give each CPU an allotment of "config_count" buffers */
> + for_each_possible_cpu(i) {
> + int j;
> +
> + /* Although we access another CPU's counters here
> + * we do it at boot time so it is safe
> + */
> + for (j =3D 0; j < dpa_bp->config_count; j +=3D 8)
> + dpa_bp_add_8_bufs(dpa_bp, i);
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(dpa_bp_priv_seed);
> +
> +/* Add buffers/(pages) for Rx processing whenever bpool count falls =
below
> + * REFILL_THRESHOLD.
> + */
> +int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
> +{
> + int count =3D *countptr;
> + int new_bufs;
> +
> + if (unlikely(count < FSL_DPAA_ETH_REFILL_THRESHOLD)) {
> + do {
> + new_bufs =3D _dpa_bp_add_8_bufs(dpa_bp);
> + if (unlikely(!new_bufs)) {
> + /* Avoid looping forever if we've =
temporarily
> + * run out of memory. We'll try again at =
the
> + * next NAPI cycle.
> + */
> + break;
> + }
> + count +=3D new_bufs;
> + } while (count < FSL_DPAA_ETH_MAX_BUF_COUNT);
> +
> + *countptr =3D count;
> + if (unlikely(count < FSL_DPAA_ETH_MAX_BUF_COUNT))
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dpaa_eth_refill_bpools);
> +
> +/* Cleanup function for outgoing frame descriptors that were built on =
Tx path,
> + * either contiguous frames or scatter/gather ones.
> + * Skb freeing is not handled here.
> + *
> + * This function may be called on error paths in the Tx function, so =
guard
> + * against cases when not all fd relevant fields were filled in.
> + *
> + * Return the skb backpointer, since for S/G frames the buffer =
containing it
> + * gets freed here.
> + */
> +struct sk_buff *_dpa_cleanup_tx_fd(const struct dpa_priv_s *priv,
> + const struct qm_fd *fd)
> +{
> + struct dpa_bp *dpa_bp =3D priv->dpa_bp;
> + dma_addr_t addr =3D qm_fd_addr(fd);
> + struct sk_buff **skbh;
> + struct sk_buff *skb =3D NULL;
> + const enum dma_data_direction dma_dir =3D DMA_TO_DEVICE;
> + int nr_frags;
> +
> + dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, dma_dir);
> +
> + /* retrieve skb back pointer */
> + DPA_READ_SKB_PTR(skb, skbh, phys_to_virt(addr), 0);
> + nr_frags =3D skb_shinfo(skb)->nr_frags;
> +
> + return skb;
> +}
> +
> +/* Build a linear skb around the received buffer.
> + * We are guaranteed there is enough room at the end of the data =
buffer to
> + * accommodate the shared info area of the skb.
> + */
> +static struct sk_buff *__hot contig_fd_to_skb(const struct dpa_priv_s =
*priv,
> + const struct qm_fd *fd)
> +{
> + struct sk_buff *skb =3D NULL, **skbh;
> + ssize_t fd_off =3D dpa_fd_offset(fd);
> + dma_addr_t addr =3D qm_fd_addr(fd);
> + void *vaddr;
> +
> + vaddr =3D phys_to_virt(addr);
> + DPA_ERR_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
> +
> + /* Retrieve the skb and adjust data and tail pointers, to make =
sure
> + * forwarded skbs will have enough space on Tx if extra headers
> + * are added.
> + */
> + DPA_READ_SKB_PTR(skb, skbh, vaddr, -1);
> +
> + DPA_ERR_ON(fd_off !=3D priv->rx_headroom);
> + skb_reserve(skb, fd_off);
> + skb_put(skb, dpa_fd_length(fd));
> +
> + skb->ip_summed =3D CHECKSUM_NONE;
> +
> + return skb;
> +}
> +
> +void __hot _dpa_rx(struct net_device *net_dev,
> + struct qman_portal *portal,
> + const struct dpa_priv_s *priv,
> + struct dpa_percpu_priv_s *percpu_priv,
> + const struct qm_fd *fd,
> + u32 fqid,
> + int *count_ptr)
> +{
> + struct dpa_bp *dpa_bp;
> + struct sk_buff *skb;
> + dma_addr_t addr =3D qm_fd_addr(fd);
> + u32 fd_status =3D fd->status;
> + unsigned int skb_len;
> + struct rtnl_link_stats64 *percpu_stats =3D &percpu_priv->stats;
> +
> + if (unlikely(fd_status & FM_FD_STAT_RX_ERRORS) !=3D 0) {
> + if (netif_msg_hw(priv) && net_ratelimit())
> + netdev_warn(net_dev, "FD status =3D 0x%08x\n",
> + fd_status & FM_FD_STAT_RX_ERRORS);
> +
> + percpu_stats->rx_errors++;
> + goto _release_frame;
> + }
> +
> + dpa_bp =3D priv->dpa_bp;
> + DPA_ERR_ON(dpa_bp !=3D dpa_bpid2pool(fd->bpid));
> +
> + /* prefetch the first 64 bytes of the frame */
> + dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, =
DMA_BIDIRECTIONAL);
> + prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
> +
> + /* The only FD type that we may receive is contig */
> + DPA_ERR_ON((fd->format !=3D qm_fd_contig));
> +
> + skb =3D contig_fd_to_skb(priv, fd);
> +
> + /* Account for the contig buffer
> + * having been removed from the pool.
> + */
> + (*count_ptr)--;
> + skb->protocol =3D eth_type_trans(skb, net_dev);
> +
> + /* IP Reassembled frames are allowed to be larger than MTU */
> + if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
> + !(fd_status & FM_FD_IPR))) {
> + percpu_stats->rx_dropped++;
> + goto drop_bad_frame;
> + }
> +
> + skb_len =3D skb->len;
> +
> + if (unlikely(netif_receive_skb(skb) =3D=3D NET_RX_DROP))
> + goto packet_dropped;
> +
> + percpu_stats->rx_packets++;
> + percpu_stats->rx_bytes +=3D skb_len;
> +
> +packet_dropped:
> + return;
> +
> +drop_bad_frame:
> + dev_kfree_skb(skb);
> + return;
> +
> +_release_frame:
> + dpa_fd_release(net_dev, fd);
> +}
> +
> +static int __hot skb_to_contig_fd(struct dpa_priv_s *priv,
> + struct sk_buff *skb, struct qm_fd *fd,
> + int *count_ptr, int *offset)
> +{
> + struct sk_buff **skbh;
> + dma_addr_t addr;
> + struct dpa_bp *dpa_bp =3D priv->dpa_bp;
> + struct net_device *net_dev =3D priv->net_dev;
> + int err;
> + enum dma_data_direction dma_dir;
> + unsigned char *buffer_start;
> +
> + {
> + /* We are guaranteed to have at least tx_headroom bytes
> + * available, so just use that for offset.
> + */
> + fd->bpid =3D 0xff;
> + buffer_start =3D skb->data - priv->tx_headroom;
> + fd->offset =3D priv->tx_headroom;
> + dma_dir =3D DMA_TO_DEVICE;
> +
> + DPA_WRITE_SKB_PTR(skb, skbh, buffer_start, 0);
> + }
> +
> + /* Enable L3/L4 hardware checksum computation.
> + *
> + * We must do this before dma_map_single(DMA_TO_DEVICE), because =
we may
> + * need to write into the skb.
> + */
> + err =3D dpa_enable_tx_csum(priv, skb, fd,
> + ((char *)skbh) + =
DPA_TX_PRIV_DATA_SIZE);
> + if (unlikely(err < 0)) {
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_err(net_dev, "HW csum error: %d\n", err);
> + return err;
> + }
> +
> + /* Fill in the rest of the FD fields */
> + fd->format =3D qm_fd_contig;
> + fd->length20 =3D skb->len;
> + fd->cmd |=3D FM_FD_CMD_FCO;
> +
> + /* Map the entire buffer size that may be seen by FMan, but no =
more */
> + addr =3D dma_map_single(dpa_bp->dev, skbh,
> + skb_end_pointer(skb) - buffer_start, =
dma_dir);
> + if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
> + if (netif_msg_tx_err(priv) && net_ratelimit())
> + netdev_err(net_dev, "dma_map_single() =
failed\n");
> + return -EINVAL;
> + }
> + fd->addr_hi =3D (u8)upper_32_bits(addr);
> + fd->addr_lo =3D lower_32_bits(addr);
> +
> + return 0;
> +}
> +
> +int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
> +{
> + struct dpa_priv_s *priv;
> + struct qm_fd fd;
> + struct dpa_percpu_priv_s *percpu_priv;
> + struct rtnl_link_stats64 *percpu_stats;
> + const int queue_mapping =3D dpa_get_queue_mapping(skb);
> + int *countptr, offset =3D 0;
> +
> + priv =3D netdev_priv(net_dev);
> + /* Non-migratable context, safe to use raw_cpu_ptr */
> + percpu_priv =3D raw_cpu_ptr(priv->percpu_priv);
> + percpu_stats =3D &percpu_priv->stats;
> + countptr =3D raw_cpu_ptr(priv->dpa_bp->percpu_count);
> +
> + clear_fd(&fd);
> +
> + /* Make sure we have enough headroom to accommodate private
> + * data, parse results, etc. Normally this shouldn't happen if
> + * we're here via the standard kernel stack.
> + */
> + if (unlikely(skb_headroom(skb) < priv->tx_headroom)) {
> + struct sk_buff *skb_new;
> +
> + skb_new =3D skb_realloc_headroom(skb, =
priv->tx_headroom);
> + if (unlikely(!skb_new)) {
> + dev_kfree_skb(skb);
> + percpu_stats->tx_errors++;
> + return NETDEV_TX_OK;
> + }
> + dev_kfree_skb(skb);
> + skb =3D skb_new;
> + }
> +
> + /* We're going to store the skb backpointer at the beginning
> + * of the data buffer, so we need a privately owned skb
> + */
> +
> + /* Code borrowed from skb_unshare(). */
> + if (skb_cloned(skb)) {
> + struct sk_buff *nskb =3D skb_copy(skb, GFP_ATOMIC);
> +
> + /* Finally, create a contig FD from this skb */
> + skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
> +
> + kfree_skb(skb);
> + skb =3D nskb;
> + /* skb_copy() has now linearized the skbuff. */
> + }
> +
> + if (unlikely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) < =
0))
> + goto xmit_failed;
> +
> + net_dev->trans_start =3D jiffies;
> + return NETDEV_TX_OK;
> +
> +xmit_failed:
> + if (fd.cmd & FM_FD_CMD_FCO) {
> + (*countptr)--;
> + dpa_fd_release(net_dev, &fd);
> + percpu_stats->tx_errors++;
> + return NETDEV_TX_OK;
> + }
> + _dpa_cleanup_tx_fd(priv, &fd);
> + percpu_stats->tx_errors++;
> + dev_kfree_skb(skb);
> + return NETDEV_TX_OK;
> +}
> --=20
> 1.7.11.7
>=20
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-03-18 16:30 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-17 18:58 [PATCH RFC 01/11] devres: add devm_alloc_percpu() Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 03/11] dpaa_eth: add PM ops Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 04/11] dpaa_eth: add configurable bpool thresholds Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 05/11] dpaa_eth: add support for S/G frames Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 06/11] dpaa_eth: add driver's Tx queue selection mechanism Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 07/11] dpaa_eth: add ethtool functionality Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 08/11] dpaa_eth: add sysfs exports Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 09/11] dpaa_eth: add debugfs counters Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 10/11] dpaa_eth: add debugfs entries Madalin Bucur
2015-03-17 18:58 ` Madalin Bucur
2015-03-17 18:58 ` [PATCH RFC 11/11] dpaa_eth: add trace points Madalin Bucur
2015-03-17 18:58 ` Madalin Bucur
2015-03-18 16:30 ` [PATCH RFC 02/11] dpaa_eth: add support for DPAA Ethernet Kumar Gala
2015-03-18 16:30 ` Kumar Gala
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.