From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
To: linux-tegra@vger.kernel.org
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Stephen Warren <swarren@wwwdotorg.org>,
Thierry Reding <thierry.reding@gmail.com>,
Alexandre Courbot <gnurou@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v6 02/12] ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
Date: Wed, 18 Mar 2015 10:52:17 +0100 [thread overview]
Message-ID: <1426672363-30667-3-git-send-email-tomeu.vizoso@collabora.com> (raw)
In-Reply-To: <1426672363-30667-1-git-send-email-tomeu.vizoso@collabora.com>
In preparation for adding the DT for the nyan-blaze board.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
---
arch/arm/boot/dts/tegra124-nyan-big.dts | 689 +-------------------------------
arch/arm/boot/dts/tegra124-nyan.dtsi | 672 +++++++++++++++++++++++++++++++
2 files changed, 685 insertions(+), 676 deletions(-)
create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index e167df2..3995630 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -1,46 +1,27 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
+#include "tegra124-nyan.dtsi"
/ {
model = "Acer Chromebook 13 CB5-311";
compatible = "google,nyan-big", "nvidia,tegra124";
- aliases {
- rtc0 = "/i2c@0,7000d000/pmic@40";
- rtc1 = "/rtc@0,7000e000";
- serial0 = &uarta;
- };
+ panel: panel {
+ compatible = "auo,b133xtn01";
- memory {
- reg = <0x0 0x80000000 0x0 0x80000000>;
+ backlight = <&backlight>;
+ ddc-i2c-bus = <&dpaux>;
};
- host1x@0,50000000 {
- hdmi@0,54280000 {
- status = "okay";
-
- vdd-supply = <&vdd_3v3_hdmi>;
- pll-supply = <&vdd_hdmi_pll>;
- hdmi-supply = <&vdd_5v0_hdmi>;
-
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio =
- <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- };
-
- sor@0,54540000 {
- status = "okay";
-
- nvidia,dpaux = <&dpaux>;
- nvidia,panel = <&panel>;
- };
+ sdhci@0,700b0400 { /* SD Card on this bus */
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ };
- dpaux@0,545c0000 {
- vdd-supply = <&vdd_3v3_panel>;
- status = "okay";
- };
+ sound {
+ compatible = "nvidia,tegra-audio-max98090-nyan-big",
+ "nvidia,tegra-audio-max98090-nyan",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "GoogleNyanBig";
};
pinmux@0,70000868 {
@@ -492,648 +473,4 @@
};
};
};
-
- serial@0,70006000 {
- /* Debug connector on the bottom of the board near SD card. */
- status = "okay";
- };
-
- pwm@0,7000a000 {
- status = "okay";
- };
-
- i2c@0,7000c000 {
- status = "okay";
- clock-frequency = <100000>;
-
- acodec: audio-codec@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
- };
-
- temperature-sensor@4c {
- compatible = "ti,tmp451";
- reg = <0x4c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
- #thermal-sensor-cells = <1>;
- };
- };
-
- i2c@0,7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@0,7000c500 {
- status = "okay";
- clock-frequency = <400000>;
-
- tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- };
- };
-
- hdmi_ddc: i2c@0,7000c700 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@0,7000d000 {
- status = "okay";
- clock-frequency = <400000>;
-
- pmic: pmic@40 {
- compatible = "ams,as3722";
- reg = <0x40>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
- ams,system-power-controller;
-
- #interrupt-cells = <2>;
- interrupt-controller;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&as3722_default>;
-
- as3722_default: pinmux {
- gpio0 {
- pins = "gpio0";
- function = "gpio";
- bias-pull-down;
- };
-
- gpio1 {
- pins = "gpio1";
- function = "gpio";
- bias-pull-up;
- };
-
- gpio2_4_7 {
- pins = "gpio2", "gpio4", "gpio7";
- function = "gpio";
- bias-pull-up;
- };
-
- gpio3_6 {
- pins = "gpio3", "gpio6";
- bias-high-impedance;
- };
-
- gpio5 {
- pins = "gpio5";
- function = "clk32k-out";
- bias-pull-down;
- };
- };
-
- regulators {
- vsup-sd2-supply = <&vdd_5v0_sys>;
- vsup-sd3-supply = <&vdd_5v0_sys>;
- vsup-sd4-supply = <&vdd_5v0_sys>;
- vsup-sd5-supply = <&vdd_5v0_sys>;
- vin-ldo0-supply = <&vdd_1v35_lp0>;
- vin-ldo1-6-supply = <&vdd_3v3_run>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <&vdd_3v3_sys>;
- vin-ldo9-10-supply = <&vdd_5v0_sys>;
- vin-ldo11-supply = <&vdd_3v3_run>;
-
- sd0 {
- regulator-name = "+VDD_CPU_AP";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-min-microamp = <3500000>;
- regulator-max-microamp = <3500000>;
- regulator-always-on;
- regulator-boot-on;
- ams,ext-control = <2>;
- };
-
- sd1 {
- regulator-name = "+VDD_CORE";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-min-microamp = <2500000>;
- regulator-max-microamp = <4000000>;
- regulator-always-on;
- regulator-boot-on;
- ams,ext-control = <1>;
- };
-
- vdd_1v35_lp0: sd2 {
- regulator-name = "+1.35V_LP0(sd2)";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sd3 {
- regulator-name = "+1.35V_LP0(sd3)";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v05_run: sd4 {
- regulator-name = "+1.05V_RUN";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- vddio_1v8: sd5 {
- regulator-name = "+1.8V_VDDIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sd6 {
- regulator-name = "+VDD_GPU_AP";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1200000>;
- regulator-min-microamp = <3500000>;
- regulator-max-microamp = <3500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo0 {
- regulator-name = "+1.05V_RUN_AVDD";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- regulator-boot-on;
- regulator-always-on;
- ams,ext-control = <1>;
- };
-
- ldo1 {
- regulator-name = "+1.8V_RUN_CAM";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo2 {
- regulator-name = "+1.2V_GEN_AVDD";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3 {
- regulator-name = "+1.00V_LP0_VDD_RTC";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- ams,enable-tracking;
- };
-
- vdd_run_cam: ldo4 {
- regulator-name = "+3.3V_RUN_CAM";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5 {
- regulator-name = "+1.2V_RUN_CAM_FRONT";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vddio_sdmmc3: ldo6 {
- regulator-name = "+VDDIO_SDMMC3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo7 {
- regulator-name = "+1.05V_RUN_CAM_REAR";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- ldo9 {
- regulator-name = "+2.8V_RUN_TOUCH";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo10 {
- regulator-name = "+2.8V_RUN_CAM_AF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo11 {
- regulator-name = "+1.8V_RUN_VPP_FUSE";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
- };
- };
-
- spi@0,7000d400 {
- status = "okay";
-
- cros_ec: cros-ec@0 {
- compatible = "google,cros-ec-spi";
- spi-max-frequency = <3000000>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
- reg = <0>;
-
- google,cros-ec-spi-msg-delay = <2000>;
-
- i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- #address-cells = <1>;
- #size-cells = <0>;
-
- google,remote-bus = <0>;
-
- charger: bq24735@9 {
- compatible = "ti,bq24735";
- reg = <0x9>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
- ti,ac-detect-gpios = <&gpio
- TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
- };
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,i2c-retry-count = <2>;
- sbs,poll-retry-count = <10>;
- power-supplies = <&charger>;
- };
- };
- };
- };
-
- spi@0,7000da00 {
- status = "okay";
- spi-max-frequency = <25000000>;
-
- flash@0 {
- compatible = "winbond,w25q32dw";
- reg = <0>;
- };
- };
-
- pmc@0,7000e400 {
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <0>;
- nvidia,cpu-pwr-good-time = <500>;
- nvidia,cpu-pwr-off-time = <300>;
- nvidia,core-pwr-good-time = <641 3845>;
- nvidia,core-pwr-off-time = <61036>;
- nvidia,core-power-req-active-high;
- nvidia,sys-clock-req-active-high;
- };
-
- hda@0,70030000 {
- status = "okay";
- };
-
- sdhci@0,700b0000 { /* WiFi/BT on this bus */
- status = "okay";
- power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- no-1-8-v;
- non-removable;
- };
-
- sdhci@0,700b0400 { /* SD Card on this bus */
- status = "okay";
- cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- no-1-8-v;
- vqmmc-supply = <&vddio_sdmmc3>;
- };
-
- sdhci@0,700b0600 { /* eMMC on this bus */
- status = "okay";
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- };
-
- ahub@0,70300000 {
- i2s@0,70301100 {
- status = "okay";
- };
- };
-
- usb@0,7d000000 { /* Rear external USB port. */
- status = "okay";
- };
-
- usb-phy@0,7d000000 {
- status = "okay";
- vbus-supply = <&vdd_usb1_vbus>;
- };
-
- usb@0,7d004000 { /* Internal webcam. */
- status = "okay";
- };
-
- usb-phy@0,7d004000 {
- status = "okay";
- vbus-supply = <&vdd_run_cam>;
- };
-
- usb@0,7d008000 { /* Left external USB port. */
- status = "okay";
- };
-
- usb-phy@0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
-
- enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- power-supply = <&vdd_led>;
- pwms = <&pwm 1 1000000>;
-
- default-brightness-level = <224>;
- brightness-levels =
- < 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255
- 256>;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- lid {
- label = "Lid";
- gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
- linux,input-type = <5>;
- linux,code = <KEY_RESERVED>;
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
-
- power {
- label = "Power";
- gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- debounce-interval = <30>;
- gpio-key,wakeup;
- };
- };
-
- panel: panel {
- compatible = "auo,b133xtn01";
-
- backlight = <&backlight>;
- ddc-i2c-bus = <&dpaux>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_3v3_run: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
-
- vdd_3v3_hdmi: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
-
- vdd_led: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "+VDD_LED";
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_5v0_ts: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "+5V_VDD_TS_SW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_usb1_vbus: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_usb3_vbus: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+5V_USB_SS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_3v3_panel: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "+3.3V_PANEL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_run>;
- };
-
- vdd_3v3_lp0: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+3.3V_LP0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- /*
- * TODO: find a way to wire this up with the USB EHCI
- * controllers so that it can be enabled on demand.
- */
- regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
-
- vdd_hdmi_pll: regulator@11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
-
- vdd_5v0_hdmi: regulator@12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
- };
-
- sound {
- compatible = "nvidia,tegra-audio-max98090-nyan-big",
- "nvidia,tegra-audio-max98090";
- nvidia,model = "GoogleNyanBig";
-
- nvidia,audio-routing =
- "Headphones", "HPR",
- "Headphones", "HPL",
- "Speakers", "SPKR",
- "Speakers", "SPKL",
- "Mic Jack", "MICBIAS",
- "DMICL", "Int Mic",
- "DMICR", "Int Mic",
- "IN34", "Mic Jack";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&acodec>;
-
- clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
- <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA124_CLK_EXTERN1>;
- clock-names = "pll_a", "pll_a_out0", "mclk";
-
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
- nvidia,mic-det-gpios =
- <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
- };
};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
new file mode 100644
index 0000000..c0ee53f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -0,0 +1,672 @@
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+ aliases {
+ rtc0 = "/i2c@0,7000d000/pmic@40";
+ rtc1 = "/rtc@0,7000e000";
+ serial0 = &uarta;
+ };
+
+ memory {
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ host1x@0,50000000 {
+ hdmi@0,54280000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_3v3_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ hdmi-supply = <&vdd_5v0_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ sor@0,54540000 {
+ status = "okay";
+
+ nvidia,dpaux = <&dpaux>;
+ nvidia,panel = <&panel>;
+ };
+
+ dpaux@0,545c0000 {
+ vdd-supply = <&vdd_3v3_panel>;
+ status = "okay";
+ };
+ };
+
+ serial@0,70006000 {
+ /* Debug connector on the bottom of the board near SD card. */
+ status = "okay";
+ };
+
+ pwm@0,7000a000 {
+ status = "okay";
+ };
+
+ i2c@0,7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ acodec: audio-codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ i2c@0,7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@0,7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ };
+
+ hdmi_ddc: i2c@0,7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@0,7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ams,system-power-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio2_4_7 {
+ pins = "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ bias-pull-down;
+ };
+ };
+
+ regulators {
+ vsup-sd2-supply = <&vdd_5v0_sys>;
+ vsup-sd3-supply = <&vdd_5v0_sys>;
+ vsup-sd4-supply = <&vdd_5v0_sys>;
+ vsup-sd5-supply = <&vdd_5v0_sys>;
+ vin-ldo0-supply = <&vdd_1v35_lp0>;
+ vin-ldo1-6-supply = <&vdd_3v3_run>;
+ vin-ldo2-5-7-supply = <&vddio_1v8>;
+ vin-ldo3-4-supply = <&vdd_3v3_sys>;
+ vin-ldo9-10-supply = <&vdd_5v0_sys>;
+ vin-ldo11-supply = <&vdd_3v3_run>;
+
+ sd0 {
+ regulator-name = "+VDD_CPU_AP";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "+VDD_CORE";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,ext-control = <1>;
+ };
+
+ vdd_1v35_lp0: sd2 {
+ regulator-name = "+1.35V_LP0(sd2)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "+1.35V_LP0(sd3)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v05_run: sd4 {
+ regulator-name = "+1.05V_RUN";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddio_1v8: sd5 {
+ regulator-name = "+1.8V_VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd6 {
+ regulator-name = "+VDD_GPU_AP";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "+1.05V_RUN_AVDD";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ ldo1 {
+ regulator-name = "+1.8V_RUN_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "+1.2V_GEN_AVDD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3 {
+ regulator-name = "+1.00V_LP0_VDD_RTC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,enable-tracking;
+ };
+
+ vdd_run_cam: ldo4 {
+ regulator-name = "+3.3V_RUN_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5 {
+ regulator-name = "+1.2V_RUN_CAM_FRONT";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vddio_sdmmc3: ldo6 {
+ regulator-name = "+VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "+1.05V_RUN_CAM_REAR";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo9 {
+ regulator-name = "+2.8V_RUN_TOUCH";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10 {
+ regulator-name = "+2.8V_RUN_CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo11 {
+ regulator-name = "+1.8V_RUN_VPP_FUSE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+
+ spi@0,7000d400 {
+ status = "okay";
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ spi-max-frequency = <3000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+
+ google,cros-ec-spi-msg-delay = <2000>;
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ charger: bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ ti,ac-detect-gpios = <&gpio
+ TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ power-supplies = <&charger>;
+ };
+ };
+ };
+ };
+
+ spi@0,7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ flash@0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ };
+ };
+
+ pmc@0,7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ hda@0,70030000 {
+ status = "okay";
+ };
+
+ sdhci@0,700b0000 { /* WiFi/BT on this bus */
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ sdhci@0,700b0400 { /* SD Card on this bus */
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ vqmmc-supply = <&vddio_sdmmc3>;
+ };
+
+ sdhci@0,700b0600 { /* eMMC on this bus */
+ status = "okay";
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ ahub@0,70300000 {
+ i2s@0,70301100 {
+ status = "okay";
+ };
+ };
+
+ usb@0,7d000000 { /* Rear external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@0,7d000000 {
+ status = "okay";
+ vbus-supply = <&vdd_usb1_vbus>;
+ };
+
+ usb@0,7d004000 { /* Internal webcam. */
+ status = "okay";
+ };
+
+ usb-phy@0,7d004000 {
+ status = "okay";
+ vbus-supply = <&vdd_run_cam>;
+ };
+
+ usb@0,7d008000 { /* Left external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@0,7d008000 {
+ status = "okay";
+ vbus-supply = <&vdd_usb3_vbus>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_led>;
+ pwms = <&pwm 1 1000000>;
+
+ default-brightness-level = <224>;
+ brightness-levels =
+ < 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255
+ 256>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>;
+ linux,code = <KEY_RESERVED>;
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <30>;
+ gpio-key,wakeup;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_led: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "+VDD_LED";
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_5v0_ts: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "+5V_VDD_TS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb3_vbus: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_3v3_panel: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "+3.3V_PANEL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_3v3_lp0: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_hdmi_pll: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
+
+ vdd_5v0_hdmi: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+ };
+
+ sound {
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "DMICL", "Int Mic",
+ "DMICR", "Int Mic",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,mic-det-gpios =
+ <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: tomeu.vizoso@collabora.com (Tomeu Vizoso)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 02/12] ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
Date: Wed, 18 Mar 2015 10:52:17 +0100 [thread overview]
Message-ID: <1426672363-30667-3-git-send-email-tomeu.vizoso@collabora.com> (raw)
In-Reply-To: <1426672363-30667-1-git-send-email-tomeu.vizoso@collabora.com>
In preparation for adding the DT for the nyan-blaze board.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
---
arch/arm/boot/dts/tegra124-nyan-big.dts | 689 +-------------------------------
arch/arm/boot/dts/tegra124-nyan.dtsi | 672 +++++++++++++++++++++++++++++++
2 files changed, 685 insertions(+), 676 deletions(-)
create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index e167df2..3995630 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -1,46 +1,27 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
+#include "tegra124-nyan.dtsi"
/ {
model = "Acer Chromebook 13 CB5-311";
compatible = "google,nyan-big", "nvidia,tegra124";
- aliases {
- rtc0 = "/i2c at 0,7000d000/pmic at 40";
- rtc1 = "/rtc at 0,7000e000";
- serial0 = &uarta;
- };
+ panel: panel {
+ compatible = "auo,b133xtn01";
- memory {
- reg = <0x0 0x80000000 0x0 0x80000000>;
+ backlight = <&backlight>;
+ ddc-i2c-bus = <&dpaux>;
};
- host1x at 0,50000000 {
- hdmi at 0,54280000 {
- status = "okay";
-
- vdd-supply = <&vdd_3v3_hdmi>;
- pll-supply = <&vdd_hdmi_pll>;
- hdmi-supply = <&vdd_5v0_hdmi>;
-
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio =
- <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- };
-
- sor at 0,54540000 {
- status = "okay";
-
- nvidia,dpaux = <&dpaux>;
- nvidia,panel = <&panel>;
- };
+ sdhci at 0,700b0400 { /* SD Card on this bus */
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ };
- dpaux at 0,545c0000 {
- vdd-supply = <&vdd_3v3_panel>;
- status = "okay";
- };
+ sound {
+ compatible = "nvidia,tegra-audio-max98090-nyan-big",
+ "nvidia,tegra-audio-max98090-nyan",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "GoogleNyanBig";
};
pinmux at 0,70000868 {
@@ -492,648 +473,4 @@
};
};
};
-
- serial at 0,70006000 {
- /* Debug connector on the bottom of the board near SD card. */
- status = "okay";
- };
-
- pwm at 0,7000a000 {
- status = "okay";
- };
-
- i2c at 0,7000c000 {
- status = "okay";
- clock-frequency = <100000>;
-
- acodec: audio-codec at 10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
- };
-
- temperature-sensor at 4c {
- compatible = "ti,tmp451";
- reg = <0x4c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
- #thermal-sensor-cells = <1>;
- };
- };
-
- i2c at 0,7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c at 0,7000c500 {
- status = "okay";
- clock-frequency = <400000>;
-
- tpm at 20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- };
- };
-
- hdmi_ddc: i2c at 0,7000c700 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c at 0,7000d000 {
- status = "okay";
- clock-frequency = <400000>;
-
- pmic: pmic at 40 {
- compatible = "ams,as3722";
- reg = <0x40>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
- ams,system-power-controller;
-
- #interrupt-cells = <2>;
- interrupt-controller;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&as3722_default>;
-
- as3722_default: pinmux {
- gpio0 {
- pins = "gpio0";
- function = "gpio";
- bias-pull-down;
- };
-
- gpio1 {
- pins = "gpio1";
- function = "gpio";
- bias-pull-up;
- };
-
- gpio2_4_7 {
- pins = "gpio2", "gpio4", "gpio7";
- function = "gpio";
- bias-pull-up;
- };
-
- gpio3_6 {
- pins = "gpio3", "gpio6";
- bias-high-impedance;
- };
-
- gpio5 {
- pins = "gpio5";
- function = "clk32k-out";
- bias-pull-down;
- };
- };
-
- regulators {
- vsup-sd2-supply = <&vdd_5v0_sys>;
- vsup-sd3-supply = <&vdd_5v0_sys>;
- vsup-sd4-supply = <&vdd_5v0_sys>;
- vsup-sd5-supply = <&vdd_5v0_sys>;
- vin-ldo0-supply = <&vdd_1v35_lp0>;
- vin-ldo1-6-supply = <&vdd_3v3_run>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <&vdd_3v3_sys>;
- vin-ldo9-10-supply = <&vdd_5v0_sys>;
- vin-ldo11-supply = <&vdd_3v3_run>;
-
- sd0 {
- regulator-name = "+VDD_CPU_AP";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-min-microamp = <3500000>;
- regulator-max-microamp = <3500000>;
- regulator-always-on;
- regulator-boot-on;
- ams,ext-control = <2>;
- };
-
- sd1 {
- regulator-name = "+VDD_CORE";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-min-microamp = <2500000>;
- regulator-max-microamp = <4000000>;
- regulator-always-on;
- regulator-boot-on;
- ams,ext-control = <1>;
- };
-
- vdd_1v35_lp0: sd2 {
- regulator-name = "+1.35V_LP0(sd2)";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sd3 {
- regulator-name = "+1.35V_LP0(sd3)";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_1v05_run: sd4 {
- regulator-name = "+1.05V_RUN";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- vddio_1v8: sd5 {
- regulator-name = "+1.8V_VDDIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sd6 {
- regulator-name = "+VDD_GPU_AP";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <1200000>;
- regulator-min-microamp = <3500000>;
- regulator-max-microamp = <3500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo0 {
- regulator-name = "+1.05V_RUN_AVDD";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- regulator-boot-on;
- regulator-always-on;
- ams,ext-control = <1>;
- };
-
- ldo1 {
- regulator-name = "+1.8V_RUN_CAM";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo2 {
- regulator-name = "+1.2V_GEN_AVDD";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3 {
- regulator-name = "+1.00V_LP0_VDD_RTC";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- ams,enable-tracking;
- };
-
- vdd_run_cam: ldo4 {
- regulator-name = "+3.3V_RUN_CAM";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5 {
- regulator-name = "+1.2V_RUN_CAM_FRONT";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vddio_sdmmc3: ldo6 {
- regulator-name = "+VDDIO_SDMMC3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo7 {
- regulator-name = "+1.05V_RUN_CAM_REAR";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- ldo9 {
- regulator-name = "+2.8V_RUN_TOUCH";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo10 {
- regulator-name = "+2.8V_RUN_CAM_AF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo11 {
- regulator-name = "+1.8V_RUN_VPP_FUSE";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
- };
- };
-
- spi at 0,7000d400 {
- status = "okay";
-
- cros_ec: cros-ec at 0 {
- compatible = "google,cros-ec-spi";
- spi-max-frequency = <3000000>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
- reg = <0>;
-
- google,cros-ec-spi-msg-delay = <2000>;
-
- i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- #address-cells = <1>;
- #size-cells = <0>;
-
- google,remote-bus = <0>;
-
- charger: bq24735 at 9 {
- compatible = "ti,bq24735";
- reg = <0x9>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
- ti,ac-detect-gpios = <&gpio
- TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
- };
-
- battery: sbs-battery at b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,i2c-retry-count = <2>;
- sbs,poll-retry-count = <10>;
- power-supplies = <&charger>;
- };
- };
- };
- };
-
- spi at 0,7000da00 {
- status = "okay";
- spi-max-frequency = <25000000>;
-
- flash at 0 {
- compatible = "winbond,w25q32dw";
- reg = <0>;
- };
- };
-
- pmc at 0,7000e400 {
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <0>;
- nvidia,cpu-pwr-good-time = <500>;
- nvidia,cpu-pwr-off-time = <300>;
- nvidia,core-pwr-good-time = <641 3845>;
- nvidia,core-pwr-off-time = <61036>;
- nvidia,core-power-req-active-high;
- nvidia,sys-clock-req-active-high;
- };
-
- hda at 0,70030000 {
- status = "okay";
- };
-
- sdhci at 0,700b0000 { /* WiFi/BT on this bus */
- status = "okay";
- power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- no-1-8-v;
- non-removable;
- };
-
- sdhci at 0,700b0400 { /* SD Card on this bus */
- status = "okay";
- cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- no-1-8-v;
- vqmmc-supply = <&vddio_sdmmc3>;
- };
-
- sdhci at 0,700b0600 { /* eMMC on this bus */
- status = "okay";
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- };
-
- ahub at 0,70300000 {
- i2s at 0,70301100 {
- status = "okay";
- };
- };
-
- usb at 0,7d000000 { /* Rear external USB port. */
- status = "okay";
- };
-
- usb-phy at 0,7d000000 {
- status = "okay";
- vbus-supply = <&vdd_usb1_vbus>;
- };
-
- usb at 0,7d004000 { /* Internal webcam. */
- status = "okay";
- };
-
- usb-phy at 0,7d004000 {
- status = "okay";
- vbus-supply = <&vdd_run_cam>;
- };
-
- usb at 0,7d008000 { /* Left external USB port. */
- status = "okay";
- };
-
- usb-phy at 0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
-
- enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- power-supply = <&vdd_led>;
- pwms = <&pwm 1 1000000>;
-
- default-brightness-level = <224>;
- brightness-levels =
- < 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255
- 256>;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock at 0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- lid {
- label = "Lid";
- gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
- linux,input-type = <5>;
- linux,code = <KEY_RESERVED>;
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
-
- power {
- label = "Power";
- gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- debounce-interval = <30>;
- gpio-key,wakeup;
- };
- };
-
- panel: panel {
- compatible = "auo,b133xtn01";
-
- backlight = <&backlight>;
- ddc-i2c-bus = <&dpaux>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_mux: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "+VDD_MUX";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_5v0_sys: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "+5V_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_3v3_sys: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "+3.3V_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_3v3_run: regulator at 3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "+3.3V_RUN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
-
- vdd_3v3_hdmi: regulator at 4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_3v3_run>;
- };
-
- vdd_led: regulator at 5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "+VDD_LED";
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_mux>;
- };
-
- vdd_5v0_ts: regulator at 6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "+5V_VDD_TS_SW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_usb1_vbus: regulator at 7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "+5V_USB_HS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_usb3_vbus: regulator at 8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "+5V_USB_SS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- gpio-open-drain;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_3v3_panel: regulator at 9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "+3.3V_PANEL";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_run>;
- };
-
- vdd_3v3_lp0: regulator at 10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "+3.3V_LP0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- /*
- * TODO: find a way to wire this up with the USB EHCI
- * controllers so that it can be enabled on demand.
- */
- regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
-
- vdd_hdmi_pll: regulator at 11 {
- compatible = "regulator-fixed";
- reg = <11>;
- regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05_run>;
- };
-
- vdd_5v0_hdmi: regulator at 12 {
- compatible = "regulator-fixed";
- reg = <12>;
- regulator-name = "+5V_HDMI_CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
- };
-
- sound {
- compatible = "nvidia,tegra-audio-max98090-nyan-big",
- "nvidia,tegra-audio-max98090";
- nvidia,model = "GoogleNyanBig";
-
- nvidia,audio-routing =
- "Headphones", "HPR",
- "Headphones", "HPL",
- "Speakers", "SPKR",
- "Speakers", "SPKL",
- "Mic Jack", "MICBIAS",
- "DMICL", "Int Mic",
- "DMICR", "Int Mic",
- "IN34", "Mic Jack";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&acodec>;
-
- clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
- <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA124_CLK_EXTERN1>;
- clock-names = "pll_a", "pll_a_out0", "mclk";
-
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
- nvidia,mic-det-gpios =
- <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
- };
};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
new file mode 100644
index 0000000..c0ee53f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -0,0 +1,672 @@
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+ aliases {
+ rtc0 = "/i2c at 0,7000d000/pmic at 40";
+ rtc1 = "/rtc at 0,7000e000";
+ serial0 = &uarta;
+ };
+
+ memory {
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ host1x at 0,50000000 {
+ hdmi at 0,54280000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_3v3_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ hdmi-supply = <&vdd_5v0_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ sor at 0,54540000 {
+ status = "okay";
+
+ nvidia,dpaux = <&dpaux>;
+ nvidia,panel = <&panel>;
+ };
+
+ dpaux at 0,545c0000 {
+ vdd-supply = <&vdd_3v3_panel>;
+ status = "okay";
+ };
+ };
+
+ serial at 0,70006000 {
+ /* Debug connector on the bottom of the board near SD card. */
+ status = "okay";
+ };
+
+ pwm at 0,7000a000 {
+ status = "okay";
+ };
+
+ i2c at 0,7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ acodec: audio-codec at 10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ temperature-sensor at 4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ i2c at 0,7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c at 0,7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm at 20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ };
+
+ hdmi_ddc: i2c at 0,7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c at 0,7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic at 40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ams,system-power-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio2_4_7 {
+ pins = "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ bias-pull-down;
+ };
+ };
+
+ regulators {
+ vsup-sd2-supply = <&vdd_5v0_sys>;
+ vsup-sd3-supply = <&vdd_5v0_sys>;
+ vsup-sd4-supply = <&vdd_5v0_sys>;
+ vsup-sd5-supply = <&vdd_5v0_sys>;
+ vin-ldo0-supply = <&vdd_1v35_lp0>;
+ vin-ldo1-6-supply = <&vdd_3v3_run>;
+ vin-ldo2-5-7-supply = <&vddio_1v8>;
+ vin-ldo3-4-supply = <&vdd_3v3_sys>;
+ vin-ldo9-10-supply = <&vdd_5v0_sys>;
+ vin-ldo11-supply = <&vdd_3v3_run>;
+
+ sd0 {
+ regulator-name = "+VDD_CPU_AP";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "+VDD_CORE";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,ext-control = <1>;
+ };
+
+ vdd_1v35_lp0: sd2 {
+ regulator-name = "+1.35V_LP0(sd2)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "+1.35V_LP0(sd3)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v05_run: sd4 {
+ regulator-name = "+1.05V_RUN";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddio_1v8: sd5 {
+ regulator-name = "+1.8V_VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd6 {
+ regulator-name = "+VDD_GPU_AP";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "+1.05V_RUN_AVDD";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ ldo1 {
+ regulator-name = "+1.8V_RUN_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "+1.2V_GEN_AVDD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3 {
+ regulator-name = "+1.00V_LP0_VDD_RTC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,enable-tracking;
+ };
+
+ vdd_run_cam: ldo4 {
+ regulator-name = "+3.3V_RUN_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5 {
+ regulator-name = "+1.2V_RUN_CAM_FRONT";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vddio_sdmmc3: ldo6 {
+ regulator-name = "+VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "+1.05V_RUN_CAM_REAR";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo9 {
+ regulator-name = "+2.8V_RUN_TOUCH";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10 {
+ regulator-name = "+2.8V_RUN_CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo11 {
+ regulator-name = "+1.8V_RUN_VPP_FUSE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+
+ spi at 0,7000d400 {
+ status = "okay";
+
+ cros_ec: cros-ec at 0 {
+ compatible = "google,cros-ec-spi";
+ spi-max-frequency = <3000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+
+ google,cros-ec-spi-msg-delay = <2000>;
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ charger: bq24735 at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ ti,ac-detect-gpios = <&gpio
+ TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: sbs-battery at b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ power-supplies = <&charger>;
+ };
+ };
+ };
+ };
+
+ spi at 0,7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ flash at 0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ };
+ };
+
+ pmc at 0,7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ hda at 0,70030000 {
+ status = "okay";
+ };
+
+ sdhci at 0,700b0000 { /* WiFi/BT on this bus */
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ sdhci at 0,700b0400 { /* SD Card on this bus */
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ vqmmc-supply = <&vddio_sdmmc3>;
+ };
+
+ sdhci at 0,700b0600 { /* eMMC on this bus */
+ status = "okay";
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ ahub at 0,70300000 {
+ i2s at 0,70301100 {
+ status = "okay";
+ };
+ };
+
+ usb at 0,7d000000 { /* Rear external USB port. */
+ status = "okay";
+ };
+
+ usb-phy at 0,7d000000 {
+ status = "okay";
+ vbus-supply = <&vdd_usb1_vbus>;
+ };
+
+ usb at 0,7d004000 { /* Internal webcam. */
+ status = "okay";
+ };
+
+ usb-phy at 0,7d004000 {
+ status = "okay";
+ vbus-supply = <&vdd_run_cam>;
+ };
+
+ usb at 0,7d008000 { /* Left external USB port. */
+ status = "okay";
+ };
+
+ usb-phy at 0,7d008000 {
+ status = "okay";
+ vbus-supply = <&vdd_usb3_vbus>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_led>;
+ pwms = <&pwm 1 1000000>;
+
+ default-brightness-level = <224>;
+ brightness-levels =
+ < 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255
+ 256>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock at 0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>;
+ linux,code = <KEY_RESERVED>;
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <30>;
+ gpio-key,wakeup;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_mux: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_sys: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_run: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_3v3_hdmi: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_led: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "+VDD_LED";
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_5v0_ts: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "+5V_VDD_TS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb1_vbus: regulator at 7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb3_vbus: regulator at 8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "+5V_USB_SS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_3v3_panel: regulator at 9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "+3.3V_PANEL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_3v3_lp0: regulator at 10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*
+ * TODO: find a way to wire this up with the USB EHCI
+ * controllers so that it can be enabled on demand.
+ */
+ regulator-always-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_hdmi_pll: regulator at 11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
+
+ vdd_5v0_hdmi: regulator at 12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+ };
+
+ sound {
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "DMICL", "Int Mic",
+ "DMICR", "Int Mic",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,mic-det-gpios =
+ <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
--
2.1.0
next prev parent reply other threads:[~2015-03-18 9:52 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-18 9:52 [PATCH v6 00/12] Improvements to Tegra-based Chromebook support Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 01/12] ARM: tegra: Change model of sound card in Nyan Big Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso [this message]
2015-03-18 9:52 ` [PATCH v6 02/12] ARM: tegra: Move out nyan-generic parts out from the nyan-big DT Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 03/12] drm/panel: add support for Samsung LTN140AT29 panel Tomeu Vizoso
2015-03-24 10:27 ` Thierry Reding
2015-03-18 9:52 ` [PATCH v6 04/12] ARM: tegra: Add DTS for the nyan-blaze board Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 05/12] ARM: tegra: Add node for trackpad in Nyan boards Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 06/12] ARM: tegra: Use pwrseq-simple for the wifi in Nyan Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 10/12] soc/tegra: pmc: move to using a restart handler Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-24 10:26 ` Thierry Reding
2015-03-24 10:26 ` Thierry Reding
2015-03-18 9:52 ` [PATCH v6 11/12] ARM: tegra: Add gpio-restart node Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 12/12] ARM: tegra: The WiFi card is kept powered during suspend Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 13/13] HACK: Hide RPMB partitions Tomeu Vizoso
[not found] ` <1426672363-30667-14-git-send-email-tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2015-03-18 9:55 ` Tomeu Vizoso
2015-03-18 9:55 ` Tomeu Vizoso
[not found] ` <1426672363-30667-1-git-send-email-tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2015-03-18 9:52 ` [PATCH v6 07/12] ARM: tegra: Use the generated pinmux data Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 08/12] ARM: tegra: Set spi-max-frequency property to flash node Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
2015-03-18 9:52 ` [PATCH v6 09/12] drm/tegra: Reset the SOR on probe Tomeu Vizoso
2015-03-18 9:52 ` Tomeu Vizoso
[not found] ` <1426672363-30667-10-git-send-email-tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2015-03-24 10:24 ` Thierry Reding
2015-03-24 10:24 ` Thierry Reding
[not found] ` <20150324102447.GA18115-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-03-25 8:59 ` [PATCH] drm/tegra: Reset the SOR during initialization Tomeu Vizoso
2015-03-25 8:59 ` Tomeu Vizoso
[not found] ` <1427273979-394-1-git-send-email-tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2015-03-26 9:24 ` Dmitry Osipenko
2015-03-26 9:24 ` Dmitry Osipenko
2015-03-24 10:28 ` [PATCH v6 00/12] Improvements to Tegra-based Chromebook support Thierry Reding
2015-03-24 10:28 ` Thierry Reding
2015-03-24 10:28 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426672363-30667-3-git-send-email-tomeu.vizoso@collabora.com \
--to=tomeu.vizoso@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.