[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

Hi,

Changes in this set compared to v3:

- Changed the SCM module DT node layout based on comments from Tony;
  basically the wkup / core are split into their own nodes now. This
  applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
  control module integrated as one instance (Patch 26, 30, 33, 34)
- Changed the tisyscon node name to scm_conf. This name is more
  descriptive for the purpose being used, scm_conf was already used
  as an alias (Patch 24, 25, 27, 29)
- Rest of the patches have no changes compared to v3.

Testing done:
- am335x-evm      : boot
- am335x-evmsk    : boot
- am3517-evm      : boot
- am43x-epos-evm  : boot
- am437x-gp-evm   : boot
- omap3-beagle-xm : boot
- omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
- am335x-boneblack: boot
- am335x-bone     : boot
- dra7xx-evm      : boot
- omap3-n900      : boot
- omap5-uevm      : boot
- omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
- omap4-panda     : boot
- omap2430-sdp    : boot
- omap3430-sdp    : boot
- omap4-sdp-es23plus: boot

Test branch pushed at:
- tree: https://github.com/t-kristo/linux-pm.git
- branch: 4.0-rc1-prcm-cleanup-v4

-Tero

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

Hi,

Changes in this set compared to v3:

- Changed the SCM module DT node layout based on comments from Tony;
  basically the wkup / core are split into their own nodes now. This
  applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
  control module integrated as one instance (Patch 26, 30, 33, 34)
- Changed the tisyscon node name to scm_conf. This name is more
  descriptive for the purpose being used, scm_conf was already used
  as an alias (Patch 24, 25, 27, 29)
- Rest of the patches have no changes compared to v3.

Testing done:
- am335x-evm      : boot
- am335x-evmsk    : boot
- am3517-evm      : boot
- am43x-epos-evm  : boot
- am437x-gp-evm   : boot
- omap3-beagle-xm : boot
- omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
- am335x-boneblack: boot
- am335x-bone     : boot
- dra7xx-evm      : boot
- omap3-n900      : boot
- omap5-uevm      : boot
- omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
- omap4-panda     : boot
- omap2430-sdp    : boot
- omap3430-sdp    : boot
- omap4-sdp-es23plus: boot

Test branch pushed at:
- tree: https://github.com/t-kristo/linux-pm.git
- branch: 4.0-rc1-prcm-cleanup-v4

-Tero

[PATCHv4 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init

[Tero Kristo]

This avoids conflicts in the global namespace, and is more descriptive
of the purpose anyway.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c         |    2 +-
 arch/arm/mach-omap2/prm.h        |    2 +-
 arch/arm/mach-omap2/prm_common.c |    8 +++++++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c4871c5..f504f71 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -764,7 +764,7 @@ int __init omap_clk_init(void)
 	ti_clk_init_features();
 
 	if (of_have_populated_dt()) {
-		ret = of_prcm_init();
+		ret = omap_prcm_init();
 		if (ret)
 			return ret;
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index b9061a6..ba9b933 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -19,7 +19,7 @@
 extern void __iomem *prm_base;
 extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
-int of_prcm_init(void);
+int omap_prcm_init(void);
 void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index bfaa7ba..c5cfaa9 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -625,7 +625,13 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
 	.clk_writel = prm_clk_writel,
 };
 
-int __init of_prcm_init(void)
+/**
+ * omap_prcm_init - low level init for the PRCM drivers
+ *
+ * Initializes the low level clock infrastructure for PRCM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_prcm_init(void)
 {
 	struct device_node *np;
 	void __iomem *mem;
-- 
1.7.9.5

[PATCHv4 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init

[Tero Kristo]

This avoids conflicts in the global namespace, and is more descriptive
of the purpose anyway.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c         |    2 +-
 arch/arm/mach-omap2/prm.h        |    2 +-
 arch/arm/mach-omap2/prm_common.c |    8 +++++++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c4871c5..f504f71 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -764,7 +764,7 @@ int __init omap_clk_init(void)
 	ti_clk_init_features();
 
 	if (of_have_populated_dt()) {
-		ret = of_prcm_init();
+		ret = omap_prcm_init();
 		if (ret)
 			return ret;
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index b9061a6..ba9b933 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -19,7 +19,7 @@
 extern void __iomem *prm_base;
 extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
-int of_prcm_init(void);
+int omap_prcm_init(void);
 void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index bfaa7ba..c5cfaa9 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -625,7 +625,13 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
 	.clk_writel = prm_clk_writel,
 };
 
-int __init of_prcm_init(void)
+/**
+ * omap_prcm_init - low level init for the PRCM drivers
+ *
+ * Initializes the low level clock infrastructure for PRCM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_prcm_init(void)
 {
 	struct device_node *np;
 	void __iomem *mem;
-- 
1.7.9.5

[PATCHv4 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs

[Tero Kristo]

This makes the API the same as used with OMAP2, and makes it possible
to implement a generic driver API for the functionality.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  |   18 +++++++++---------
 arch/arm/mach-omap2/prm3xxx.c |    8 ++++----
 arch/arm/mach-omap2/prm3xxx.h |    2 +-
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 88721df..2581329 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -137,9 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					~(OMAP3430_ST_IO_MASK |
-					  OMAP3430_ST_IO_CHAIN_MASK));
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+					OMAP3430_ST_IO_CHAIN_MASK);
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -154,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * IO events before parsing in mux code
 	 */
 	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					OMAP3430_ST_IO_MASK |
-					OMAP3430_ST_IO_CHAIN_MASK);
-	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+					~(OMAP3430_ST_IO_MASK |
+					  OMAP3430_ST_IO_CHAIN_MASK));
+	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1,
+						 ~0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 5713bbd..4cc72e8 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -217,7 +217,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
  * @module: PRM module to clear wakeups from
  * @regs: register set to clear, 1 or 3
- * @ignore_bits: wakeup status bits to ignore
+ * @wkst_mask: wkst bits to clear
  *
  * The purpose of this function is to clear any wake-up events latched
  * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
@@ -226,7 +226,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -238,7 +238,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 
 	wkst = omap2_prm_read_mod_reg(module, wkst_off);
 	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
+	wkst &= wkst_mask;
 	if (wkst) {
 		iclk = omap2_cm_read_mod_reg(module, iclk_off);
 		fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -254,7 +254,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
 			omap2_prm_write_mod_reg(wkst, module, wkst_off);
 			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
+			wkst &= wkst_mask;
 			c++;
 		}
 		omap2_cm_write_mod_reg(iclk, module, iclk_off);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index ed8a3d8..856f3c5 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -145,7 +145,7 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
-- 
1.7.9.5

[PATCHv4 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs

[Tero Kristo]

This makes the API the same as used with OMAP2, and makes it possible
to implement a generic driver API for the functionality.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  |   18 +++++++++---------
 arch/arm/mach-omap2/prm3xxx.c |    8 ++++----
 arch/arm/mach-omap2/prm3xxx.h |    2 +-
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 88721df..2581329 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -137,9 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					~(OMAP3430_ST_IO_MASK |
-					  OMAP3430_ST_IO_CHAIN_MASK));
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+					OMAP3430_ST_IO_CHAIN_MASK);
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -154,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * IO events before parsing in mux code
 	 */
 	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					OMAP3430_ST_IO_MASK |
-					OMAP3430_ST_IO_CHAIN_MASK);
-	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+					~(OMAP3430_ST_IO_MASK |
+					  OMAP3430_ST_IO_CHAIN_MASK));
+	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1,
+						 ~0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 5713bbd..4cc72e8 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -217,7 +217,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
  * @module: PRM module to clear wakeups from
  * @regs: register set to clear, 1 or 3
- * @ignore_bits: wakeup status bits to ignore
+ * @wkst_mask: wkst bits to clear
  *
  * The purpose of this function is to clear any wake-up events latched
  * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
@@ -226,7 +226,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -238,7 +238,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 
 	wkst = omap2_prm_read_mod_reg(module, wkst_off);
 	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
+	wkst &= wkst_mask;
 	if (wkst) {
 		iclk = omap2_cm_read_mod_reg(module, iclk_off);
 		fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -254,7 +254,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
 			omap2_prm_write_mod_reg(wkst, module, wkst_off);
 			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
+			wkst &= wkst_mask;
 			c++;
 		}
 		omap2_cm_write_mod_reg(iclk, module, iclk_off);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index ed8a3d8..856f3c5 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -145,7 +145,7 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
-- 
1.7.9.5

[PATCHv4 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs

[Tero Kristo]

OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific
implementation details are provided through prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm24xx.c     |   24 +++++++++++-------------
 arch/arm/mach-omap2/pm34xx.c     |   18 ++++++++----------
 arch/arm/mach-omap2/prm.h        |    2 ++
 arch/arm/mach-omap2/prm2xxx.c    |    4 +++-
 arch/arm/mach-omap2/prm2xxx.h    |    2 --
 arch/arm/mach-omap2/prm3xxx.c    |    3 ++-
 arch/arm/mach-omap2/prm3xxx.h    |    1 -
 arch/arm/mach-omap2/prm_common.c |   21 +++++++++++++++++++++
 8 files changed, 47 insertions(+), 28 deletions(-)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index fe01c5a..b1aad7e 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
 
 	/* Clear old wake-up events */
 	/* REVISIT: These write to reserved bits? */
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,18 +104,16 @@ no_sleep:
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
 
 	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
+	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
 
 	/* MPU domain wake events */
-	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
-				    0x1);
+	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
 
-	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
-				    0x20);
+	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
 
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -143,9 +141,9 @@ static void omap2_enter_mpu_retention(void)
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
 		/* REVISIT: These write to reserved bits? */
-		omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-		omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-		omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+		omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+		omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+		omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 		/* Try to enter MPU retention */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2581329..87b98bf9 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -137,8 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
-					OMAP3430_ST_IO_CHAIN_MASK);
+	c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+				    OMAP3430_ST_IO_CHAIN_MASK);
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -152,15 +152,13 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * these are handled in a separate handler to avoid acking
 	 * IO events before parsing in mux code
 	 */
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					~(OMAP3430_ST_IO_MASK |
-					  OMAP3430_ST_IO_CHAIN_MASK));
-	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
-	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
+	c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK |
+						   OMAP3430_ST_IO_CHAIN_MASK));
+	c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+	c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
-		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1,
-						 ~0);
+		c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+		c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ba9b933..2a01a58 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -146,6 +146,7 @@ struct prm_ll_data {
 	int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
 				     u16 offset);
 	void (*reset_system)(void);
+	int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
@@ -161,6 +162,7 @@ extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
 void omap_prm_reset_system(void);
 
 void omap_prm_reconfigure_io_chain(void);
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index af0f152..bacb05e 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -123,13 +123,14 @@ static void omap2xxx_prm_dpll_reset(void)
  * Clears wakeup status bits for a given module, so that the device can
  * re-enter idle.
  */
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst;
 
 	wkst = omap2_prm_read_mod_reg(module, regs);
 	wkst &= wkst_mask;
 	omap2_prm_write_mod_reg(wkst, module, regs);
+	return 0;
 }
 
 int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
@@ -216,6 +217,7 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.deassert_hardreset = &omap2_prm_deassert_hardreset,
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap2xxx_prm_dpll_reset,
+	.clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
 };
 
 int __init omap2xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 1d51643..9c91f4f 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,8 +124,6 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
-
 extern int __init omap2xxx_prm_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4cc72e8..a444334 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -226,7 +226,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -664,6 +664,7 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.deassert_hardreset = &omap2_prm_deassert_hardreset,
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap3xxx_prm_dpll3_reset,
+	.clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
 };
 
 int __init omap3xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 856f3c5..5a09a74 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -145,7 +145,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index c5cfaa9..2c2e7ed 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -534,6 +534,27 @@ void omap_prm_reset_system(void)
 }
 
 /**
+ * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register to clear
+ * @wkst_mask: wkst bits to clear
+ *
+ * Clears any wakeup events for the module and register set defined.
+ * Uses SoC specific implementation to do the actual wakeup status
+ * clearing.
+ */
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+	if (!prm_ll_data->clear_mod_irqs) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
+}
+
+/**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register
  *
-- 
1.7.9.5

[PATCHv4 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs

[Tero Kristo]

OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific
implementation details are provided through prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm24xx.c     |   24 +++++++++++-------------
 arch/arm/mach-omap2/pm34xx.c     |   18 ++++++++----------
 arch/arm/mach-omap2/prm.h        |    2 ++
 arch/arm/mach-omap2/prm2xxx.c    |    4 +++-
 arch/arm/mach-omap2/prm2xxx.h    |    2 --
 arch/arm/mach-omap2/prm3xxx.c    |    3 ++-
 arch/arm/mach-omap2/prm3xxx.h    |    1 -
 arch/arm/mach-omap2/prm_common.c |   21 +++++++++++++++++++++
 8 files changed, 47 insertions(+), 28 deletions(-)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index fe01c5a..b1aad7e 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
 
 	/* Clear old wake-up events */
 	/* REVISIT: These write to reserved bits? */
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,18 +104,16 @@ no_sleep:
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
 
 	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
+	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
 
 	/* MPU domain wake events */
-	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
-				    0x1);
+	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
 
-	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
-				    0x20);
+	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
 
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -143,9 +141,9 @@ static void omap2_enter_mpu_retention(void)
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
 		/* REVISIT: These write to reserved bits? */
-		omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-		omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-		omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+		omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+		omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+		omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 		/* Try to enter MPU retention */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2581329..87b98bf9 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -137,8 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
-					OMAP3430_ST_IO_CHAIN_MASK);
+	c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+				    OMAP3430_ST_IO_CHAIN_MASK);
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -152,15 +152,13 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * these are handled in a separate handler to avoid acking
 	 * IO events before parsing in mux code
 	 */
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					~(OMAP3430_ST_IO_MASK |
-					  OMAP3430_ST_IO_CHAIN_MASK));
-	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
-	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
+	c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK |
+						   OMAP3430_ST_IO_CHAIN_MASK));
+	c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+	c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
-		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1,
-						 ~0);
+		c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+		c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ba9b933..2a01a58 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -146,6 +146,7 @@ struct prm_ll_data {
 	int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
 				     u16 offset);
 	void (*reset_system)(void);
+	int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
@@ -161,6 +162,7 @@ extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
 void omap_prm_reset_system(void);
 
 void omap_prm_reconfigure_io_chain(void);
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index af0f152..bacb05e 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -123,13 +123,14 @@ static void omap2xxx_prm_dpll_reset(void)
  * Clears wakeup status bits for a given module, so that the device can
  * re-enter idle.
  */
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst;
 
 	wkst = omap2_prm_read_mod_reg(module, regs);
 	wkst &= wkst_mask;
 	omap2_prm_write_mod_reg(wkst, module, regs);
+	return 0;
 }
 
 int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
@@ -216,6 +217,7 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.deassert_hardreset = &omap2_prm_deassert_hardreset,
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap2xxx_prm_dpll_reset,
+	.clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
 };
 
 int __init omap2xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 1d51643..9c91f4f 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,8 +124,6 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
-
 extern int __init omap2xxx_prm_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4cc72e8..a444334 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -226,7 +226,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -664,6 +664,7 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.deassert_hardreset = &omap2_prm_deassert_hardreset,
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap3xxx_prm_dpll3_reset,
+	.clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
 };
 
 int __init omap3xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 856f3c5..5a09a74 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -145,7 +145,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index c5cfaa9..2c2e7ed 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -534,6 +534,27 @@ void omap_prm_reset_system(void)
 }
 
 /**
+ * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register to clear
+ * @wkst_mask: wkst bits to clear
+ *
+ * Clears any wakeup events for the module and register set defined.
+ * Uses SoC specific implementation to do the actual wakeup status
+ * clearing.
+ */
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+	if (!prm_ll_data->clear_mod_irqs) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
+}
+
+/**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register
  *
-- 
1.7.9.5

[PATCHv4 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone

[Tero Kristo]

PRM driver now only exports a generic API for clearing / checking
VP txdone status.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm.h          |   14 ++++++++++++++
 arch/arm/mach-omap2/prm3xxx.c      |    6 ++++--
 arch/arm/mach-omap2/prm3xxx.h      |    4 ----
 arch/arm/mach-omap2/prm44xx.c      |    6 ++++--
 arch/arm/mach-omap2/prm44xx_54xx.h |    4 ----
 arch/arm/mach-omap2/prm_common.c   |   34 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/vp.h           |    9 ---------
 arch/arm/mach-omap2/vp3xxx_data.c  |    4 ++--
 arch/arm/mach-omap2/vp44xx_data.c  |    4 ++--
 9 files changed, 60 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 2a01a58..4e390ec 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -147,6 +147,8 @@ struct prm_ll_data {
 				     u16 offset);
 	void (*reset_system)(void);
 	int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
+	u32 (*vp_check_txdone)(u8 vp_id);
+	void (*vp_clear_txdone)(u8 vp_id);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
@@ -164,6 +166,18 @@ void omap_prm_reset_system(void);
 void omap_prm_reconfigure_io_chain(void);
 int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID	0
+#define OMAP3_VP_VDD_CORE_ID	1
+#define OMAP4_VP_VDD_CORE_ID	0
+#define OMAP4_VP_VDD_IVA_ID	1
+#define OMAP4_VP_VDD_MPU_ID	2
+
+u32 omap_prm_vp_check_txdone(u8 vp_id);
+void omap_prm_vp_clear_txdone(u8 vp_id);
+
 #endif
 
 
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index a444334..2b478adc 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -96,7 +96,7 @@ static struct omap3_vp omap3_vp[] = {
 
 #define MAX_VP_ID ARRAY_SIZE(omap3_vp);
 
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+static u32 omap3_prm_vp_check_txdone(u8 vp_id)
 {
 	struct omap3_vp *vp = &omap3_vp[vp_id];
 	u32 irqstatus;
@@ -106,7 +106,7 @@ u32 omap3_prm_vp_check_txdone(u8 vp_id)
 	return irqstatus & vp->tranxdone_status;
 }
 
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+static void omap3_prm_vp_clear_txdone(u8 vp_id)
 {
 	struct omap3_vp *vp = &omap3_vp[vp_id];
 
@@ -665,6 +665,8 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap3xxx_prm_dpll3_reset,
 	.clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
+	.vp_check_txdone = &omap3_prm_vp_check_txdone,
+	.vp_clear_txdone = &omap3_prm_vp_clear_txdone,
 };
 
 int __init omap3xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 5a09a74..55e4c89 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -132,10 +132,6 @@
 
 #ifndef __ASSEMBLER__
 
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
 /*
  * OMAP3 access functions for voltage controller (VC) and
  * voltage proccessor (VP) in the PRM.
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a08a617..1af0137 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -138,7 +138,7 @@ static struct omap4_vp omap4_vp[] = {
 	},
 };
 
-u32 omap4_prm_vp_check_txdone(u8 vp_id)
+static u32 omap4_prm_vp_check_txdone(u8 vp_id)
 {
 	struct omap4_vp *vp = &omap4_vp[vp_id];
 	u32 irqstatus;
@@ -149,7 +149,7 @@ u32 omap4_prm_vp_check_txdone(u8 vp_id)
 	return irqstatus & vp->tranxdone_status;
 }
 
-void omap4_prm_vp_clear_txdone(u8 vp_id)
+static void omap4_prm_vp_clear_txdone(u8 vp_id)
 {
 	struct omap4_vp *vp = &omap4_vp[vp_id];
 
@@ -699,6 +699,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
 	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
 	.reset_system		= omap4_prminst_global_warm_sw_reset,
+	.vp_check_txdone	= omap4_prm_vp_check_txdone,
+	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
 int __init omap44xx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7143295..a470185 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -26,10 +26,6 @@
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
-/* OMAP4/OMAP5-specific VP functions */
-u32 omap4_prm_vp_check_txdone(u8 vp_id);
-void omap4_prm_vp_clear_txdone(u8 vp_id);
-
 /*
  * OMAP4/OMAP5 access functions for voltage controller (VC) and
  * voltage proccessor (VP) in the PRM.
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 2c2e7ed..79cee11 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -555,6 +555,40 @@ int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 }
 
 /**
+ * omap_prm_vp_check_txdone - check voltage processor TX done status
+ *
+ * Checks if voltage processor transmission has been completed.
+ * Returns non-zero if a transmission has completed, 0 otherwise.
+ */
+u32 omap_prm_vp_check_txdone(u8 vp_id)
+{
+	if (!prm_ll_data->vp_check_txdone) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return 0;
+	}
+
+	return prm_ll_data->vp_check_txdone(vp_id);
+}
+
+/**
+ * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ *
+ * Clears the status bit for completed voltage processor transmission
+ * returned by prm_vp_check_txdone.
+ */
+void omap_prm_vp_clear_txdone(u8 vp_id)
+{
+	if (!prm_ll_data->vp_clear_txdone) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return;
+	}
+
+	prm_ll_data->vp_clear_txdone(vp_id);
+}
+
+/**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register
  *
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 0fdf7080..7e08296 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -21,15 +21,6 @@
 
 struct voltagedomain;
 
-/*
- * Voltage Processor (VP) identifiers
- */
-#define OMAP3_VP_VDD_MPU_ID 0
-#define OMAP3_VP_VDD_CORE_ID 1
-#define OMAP4_VP_VDD_CORE_ID 0
-#define OMAP4_VP_VDD_IVA_ID 1
-#define OMAP4_VP_VDD_MPU_ID 2
-
 /* XXX document */
 #define VP_IDLE_TIMEOUT		200
 #define VP_TRANXDONE_TIMEOUT	300
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 1914e02..b0590fe 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -28,8 +28,8 @@
 #include "prm2xxx_3xxx.h"
 
 static const struct omap_vp_ops omap3_vp_ops = {
-	.check_txdone = omap3_prm_vp_check_txdone,
-	.clear_txdone = omap3_prm_vp_clear_txdone,
+	.check_txdone = omap_prm_vp_check_txdone,
+	.clear_txdone = omap_prm_vp_clear_txdone,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index e62f6b0..2448bb9 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -28,8 +28,8 @@
 #include "vp.h"
 
 static const struct omap_vp_ops omap4_vp_ops = {
-	.check_txdone = omap4_prm_vp_check_txdone,
-	.clear_txdone = omap4_prm_vp_clear_txdone,
+	.check_txdone = omap_prm_vp_check_txdone,
+	.clear_txdone = omap_prm_vp_clear_txdone,
 };
 
 /*
-- 
1.7.9.5

[PATCHv4 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone

[Tero Kristo]

PRM driver now only exports a generic API for clearing / checking
VP txdone status.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm.h          |   14 ++++++++++++++
 arch/arm/mach-omap2/prm3xxx.c      |    6 ++++--
 arch/arm/mach-omap2/prm3xxx.h      |    4 ----
 arch/arm/mach-omap2/prm44xx.c      |    6 ++++--
 arch/arm/mach-omap2/prm44xx_54xx.h |    4 ----
 arch/arm/mach-omap2/prm_common.c   |   34 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/vp.h           |    9 ---------
 arch/arm/mach-omap2/vp3xxx_data.c  |    4 ++--
 arch/arm/mach-omap2/vp44xx_data.c  |    4 ++--
 9 files changed, 60 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 2a01a58..4e390ec 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -147,6 +147,8 @@ struct prm_ll_data {
 				     u16 offset);
 	void (*reset_system)(void);
 	int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
+	u32 (*vp_check_txdone)(u8 vp_id);
+	void (*vp_clear_txdone)(u8 vp_id);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
@@ -164,6 +166,18 @@ void omap_prm_reset_system(void);
 void omap_prm_reconfigure_io_chain(void);
 int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID	0
+#define OMAP3_VP_VDD_CORE_ID	1
+#define OMAP4_VP_VDD_CORE_ID	0
+#define OMAP4_VP_VDD_IVA_ID	1
+#define OMAP4_VP_VDD_MPU_ID	2
+
+u32 omap_prm_vp_check_txdone(u8 vp_id);
+void omap_prm_vp_clear_txdone(u8 vp_id);
+
 #endif
 
 
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index a444334..2b478adc 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -96,7 +96,7 @@ static struct omap3_vp omap3_vp[] = {
 
 #define MAX_VP_ID ARRAY_SIZE(omap3_vp);
 
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+static u32 omap3_prm_vp_check_txdone(u8 vp_id)
 {
 	struct omap3_vp *vp = &omap3_vp[vp_id];
 	u32 irqstatus;
@@ -106,7 +106,7 @@ u32 omap3_prm_vp_check_txdone(u8 vp_id)
 	return irqstatus & vp->tranxdone_status;
 }
 
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+static void omap3_prm_vp_clear_txdone(u8 vp_id)
 {
 	struct omap3_vp *vp = &omap3_vp[vp_id];
 
@@ -665,6 +665,8 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 	.reset_system = &omap3xxx_prm_dpll3_reset,
 	.clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
+	.vp_check_txdone = &omap3_prm_vp_check_txdone,
+	.vp_clear_txdone = &omap3_prm_vp_clear_txdone,
 };
 
 int __init omap3xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 5a09a74..55e4c89 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -132,10 +132,6 @@
 
 #ifndef __ASSEMBLER__
 
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
 /*
  * OMAP3 access functions for voltage controller (VC) and
  * voltage proccessor (VP) in the PRM.
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a08a617..1af0137 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -138,7 +138,7 @@ static struct omap4_vp omap4_vp[] = {
 	},
 };
 
-u32 omap4_prm_vp_check_txdone(u8 vp_id)
+static u32 omap4_prm_vp_check_txdone(u8 vp_id)
 {
 	struct omap4_vp *vp = &omap4_vp[vp_id];
 	u32 irqstatus;
@@ -149,7 +149,7 @@ u32 omap4_prm_vp_check_txdone(u8 vp_id)
 	return irqstatus & vp->tranxdone_status;
 }
 
-void omap4_prm_vp_clear_txdone(u8 vp_id)
+static void omap4_prm_vp_clear_txdone(u8 vp_id)
 {
 	struct omap4_vp *vp = &omap4_vp[vp_id];
 
@@ -699,6 +699,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
 	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
 	.reset_system		= omap4_prminst_global_warm_sw_reset,
+	.vp_check_txdone	= omap4_prm_vp_check_txdone,
+	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
 int __init omap44xx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7143295..a470185 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -26,10 +26,6 @@
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
-/* OMAP4/OMAP5-specific VP functions */
-u32 omap4_prm_vp_check_txdone(u8 vp_id);
-void omap4_prm_vp_clear_txdone(u8 vp_id);
-
 /*
  * OMAP4/OMAP5 access functions for voltage controller (VC) and
  * voltage proccessor (VP) in the PRM.
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 2c2e7ed..79cee11 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -555,6 +555,40 @@ int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 }
 
 /**
+ * omap_prm_vp_check_txdone - check voltage processor TX done status
+ *
+ * Checks if voltage processor transmission has been completed.
+ * Returns non-zero if a transmission has completed, 0 otherwise.
+ */
+u32 omap_prm_vp_check_txdone(u8 vp_id)
+{
+	if (!prm_ll_data->vp_check_txdone) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return 0;
+	}
+
+	return prm_ll_data->vp_check_txdone(vp_id);
+}
+
+/**
+ * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ *
+ * Clears the status bit for completed voltage processor transmission
+ * returned by prm_vp_check_txdone.
+ */
+void omap_prm_vp_clear_txdone(u8 vp_id)
+{
+	if (!prm_ll_data->vp_clear_txdone) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return;
+	}
+
+	prm_ll_data->vp_clear_txdone(vp_id);
+}
+
+/**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register
  *
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 0fdf7080..7e08296 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -21,15 +21,6 @@
 
 struct voltagedomain;
 
-/*
- * Voltage Processor (VP) identifiers
- */
-#define OMAP3_VP_VDD_MPU_ID 0
-#define OMAP3_VP_VDD_CORE_ID 1
-#define OMAP4_VP_VDD_CORE_ID 0
-#define OMAP4_VP_VDD_IVA_ID 1
-#define OMAP4_VP_VDD_MPU_ID 2
-
 /* XXX document */
 #define VP_IDLE_TIMEOUT		200
 #define VP_TRANXDONE_TIMEOUT	300
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 1914e02..b0590fe 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -28,8 +28,8 @@
 #include "prm2xxx_3xxx.h"
 
 static const struct omap_vp_ops omap3_vp_ops = {
-	.check_txdone = omap3_prm_vp_check_txdone,
-	.clear_txdone = omap3_prm_vp_clear_txdone,
+	.check_txdone = omap_prm_vp_check_txdone,
+	.clear_txdone = omap_prm_vp_clear_txdone,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index e62f6b0..2448bb9 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -28,8 +28,8 @@
 #include "vp.h"
 
 static const struct omap_vp_ops omap4_vp_ops = {
-	.check_txdone = omap4_prm_vp_check_txdone,
-	.clear_txdone = omap4_prm_vp_clear_txdone,
+	.check_txdone = omap_prm_vp_check_txdone,
+	.clear_txdone = omap_prm_vp_clear_txdone,
 };
 
 /*
-- 
1.7.9.5

[PATCHv4 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver

[Tero Kristo]

There is no need to call this separately from io.c, rather this can be
done commonly under the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c      |    4 ----
 arch/arm/mach-omap2/prm44xx.c |    2 ++
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index f504f71..5569c2f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -623,7 +623,6 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
@@ -654,7 +653,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -690,7 +688,6 @@ void __init omap5_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
@@ -722,7 +719,6 @@ void __init dra7xx_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 1af0137..6f647f6 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -705,6 +705,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
+	omap_prm_base_init();
+
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
-- 
1.7.9.5

[PATCHv4 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver

[Tero Kristo]

There is no need to call this separately from io.c, rather this can be
done commonly under the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c      |    4 ----
 arch/arm/mach-omap2/prm44xx.c |    2 ++
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index f504f71..5569c2f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -623,7 +623,6 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
@@ -654,7 +653,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -690,7 +688,6 @@ void __init omap5_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
@@ -722,7 +719,6 @@ void __init dra7xx_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 1af0137..6f647f6 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -705,6 +705,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
+	omap_prm_base_init();
+
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
-- 
1.7.9.5

[PATCHv4 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver

[Tero Kristo]

There is no need to call this separately from io.c, rather this can be
done commonly under the CM driver. Also, this patch makes the API static,
as it is no longer used outside the driver file.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm44xx.h     |    1 -
 arch/arm/mach-omap2/cminst44xx.c |    4 +++-
 arch/arm/mach-omap2/io.c         |    4 ----
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 728d06a..ad6e263 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,7 +23,6 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
-void omap_cm_base_init(void);
 int omap4_cm_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 95a8cff..9319034 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -63,7 +63,7 @@ static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS];
  * Populates the base addresses of the _cm_bases
  * array used for read/write of cm module registers.
  */
-void omap_cm_base_init(void)
+static void omap_cm_base_init(void)
 {
 	_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
 	_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
@@ -516,6 +516,8 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 
 int __init omap4_cm_init(void)
 {
+	omap_cm_base_init();
+
 	return cm_register(&omap4xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5569c2f..364b530 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -623,7 +623,6 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
-	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -653,7 +652,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
-	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap4_cm_init();
@@ -688,7 +686,6 @@ void __init omap5_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
 	omap4_cm_init();
@@ -719,7 +716,6 @@ void __init dra7xx_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
 	omap4_cm_init();
-- 
1.7.9.5

[PATCHv4 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver

[Tero Kristo]

There is no need to call this separately from io.c, rather this can be
done commonly under the CM driver. Also, this patch makes the API static,
as it is no longer used outside the driver file.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm44xx.h     |    1 -
 arch/arm/mach-omap2/cminst44xx.c |    4 +++-
 arch/arm/mach-omap2/io.c         |    4 ----
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 728d06a..ad6e263 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,7 +23,6 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
-void omap_cm_base_init(void);
 int omap4_cm_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 95a8cff..9319034 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -63,7 +63,7 @@ static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS];
  * Populates the base addresses of the _cm_bases
  * array used for read/write of cm module registers.
  */
-void omap_cm_base_init(void)
+static void omap_cm_base_init(void)
 {
 	_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
 	_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
@@ -516,6 +516,8 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 
 int __init omap4_cm_init(void)
 {
+	omap_cm_base_init();
+
 	return cm_register(&omap4xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5569c2f..364b530 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -623,7 +623,6 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
-	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -653,7 +652,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
-	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap4_cm_init();
@@ -688,7 +686,6 @@ void __init omap5_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
 	omap4_cm_init();
@@ -719,7 +716,6 @@ void __init dra7xx_init_early(void)
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
 	omap4_cm_init();
-- 
1.7.9.5

[PATCHv4 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order

[Tero Kristo]

OMAP4 has different ordering of PRM and CM init calls in the early init.
Re-oder these accordingly for OMAP4 also. This is needed so that we
can do some optimizations in the following patches for the PRCM init.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 364b530..460da22 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -654,9 +654,9 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
+	omap44xx_prm_init();
 	omap4_cm_init();
 	omap4_pm_init_early();
-	omap44xx_prm_init();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
 	omap44xx_clockdomains_init();
-- 
1.7.9.5

[PATCHv4 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order

[Tero Kristo]

OMAP4 has different ordering of PRM and CM init calls in the early init.
Re-oder these accordingly for OMAP4 also. This is needed so that we
can do some optimizations in the following patches for the PRCM init.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 364b530..460da22 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -654,9 +654,9 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
+	omap44xx_prm_init();
 	omap4_cm_init();
 	omap4_pm_init_early();
-	omap44xx_prm_init();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
 	omap44xx_clockdomains_init();
-- 
1.7.9.5

[PATCHv4 08/35] clk: ti: fix ti_clk_get_reg_addr error handling

[Tero Kristo]

There is a case where NULL can be a valid return value for
ti_clk_get_reg_addr, specifically the case where both the provider index
and register offsets are zero. In this case, the current error checking
against a NULL pointer will fail. Thus, change the API to return a
ERR_PTR value in an error case, and change all the users of this API to
check against IS_ERR instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Michael Turquette <mturquette@linaro.org>
---
 drivers/clk/ti/apll.c      |    5 +++--
 drivers/clk/ti/autoidle.c  |    2 +-
 drivers/clk/ti/clk.c       |    7 ++++---
 drivers/clk/ti/divider.c   |    4 ++--
 drivers/clk/ti/dpll.c      |    6 +++---
 drivers/clk/ti/gate.c      |    4 ++--
 drivers/clk/ti/interface.c |    2 +-
 drivers/clk/ti/mux.c       |    4 ++--
 8 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 72d9727..49baf38 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -203,7 +203,7 @@ static void __init of_dra7_apll_setup(struct device_node *node)
 	ad->control_reg = ti_clk_get_reg_addr(node, 0);
 	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
 
-	if (!ad->control_reg || !ad->idlest_reg)
+	if (IS_ERR(ad->control_reg) || IS_ERR(ad->idlest_reg))
 		goto cleanup;
 
 	ad->idlest_mask = 0x1;
@@ -384,7 +384,8 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
 	ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
 
-	if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
+	if (IS_ERR(ad->control_reg) || IS_ERR(ad->autoidle_reg) ||
+	    IS_ERR(ad->idlest_reg))
 		goto cleanup;
 
 	clk = clk_register(NULL, &clk_hw->hw);
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 8912ff8..e75c64c 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -119,7 +119,7 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 	clk->name = node->name;
 	clk->reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!clk->reg) {
+	if (IS_ERR(clk->reg)) {
 		kfree(clk);
 		return -EINVAL;
 	}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index e22b956..0ebe5c5 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -103,7 +103,8 @@ int __init ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
  * @index: register index from the clock node
  *
  * Builds clock register address from device tree information. This
- * is a struct of type clk_omap_reg.
+ * is a struct of type clk_omap_reg. Returns a pointer to the register
+ * address, or a pointer error value in failure.
  */
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
 {
@@ -121,14 +122,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
 
 	if (i == CLK_MAX_MEMMAPS) {
 		pr_err("clk-provider not found for %s!\n", node->name);
-		return NULL;
+		return ERR_PTR(-ENOENT);
 	}
 
 	reg->index = i;
 
 	if (of_property_read_u32_index(node, "reg", index, &val)) {
 		pr_err("%s must have reg[%d]!\n", node->name, index);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	reg->offset = val;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 6211893..ff5f117 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -530,8 +530,8 @@ static int __init ti_clk_divider_populate(struct device_node *node,
 	u32 val;
 
 	*reg = ti_clk_get_reg_addr(node, 0);
-	if (!*reg)
-		return -EINVAL;
+	if (IS_ERR(*reg))
+		return PTR_ERR(*reg);
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
 		*shift = val;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 81dc469..11478a5 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -390,18 +390,18 @@ static void __init of_ti_dpll_setup(struct device_node *node,
 #endif
 	} else {
 		dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
-		if (!dd->idlest_reg)
+		if (IS_ERR(dd->idlest_reg))
 			goto cleanup;
 
 		dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
 	}
 
-	if (!dd->control_reg || !dd->mult_div1_reg)
+	if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
 		goto cleanup;
 
 	if (dd->autoidle_mask) {
 		dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
-		if (!dd->autoidle_reg)
+		if (IS_ERR(dd->autoidle_reg))
 			goto cleanup;
 	}
 
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index d493307..0c6fdfc 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -225,7 +225,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 
 	if (ops != &omap_gate_clkdm_clk_ops) {
 		reg = ti_clk_get_reg_addr(node, 0);
-		if (!reg)
+		if (IS_ERR(reg))
 			return;
 
 		if (!of_property_read_u32(node, "ti,bit-shift", &val))
@@ -264,7 +264,7 @@ _of_ti_composite_gate_clk_setup(struct device_node *node,
 		return;
 
 	gate->enable_reg = ti_clk_get_reg_addr(node, 0);
-	if (!gate->enable_reg)
+	if (IS_ERR(gate->enable_reg))
 		goto cleanup;
 
 	of_property_read_u32(node, "ti,bit-shift", &val);
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 265d91f..c76230d 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -111,7 +111,7 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 	u32 val;
 
 	reg = ti_clk_get_reg_addr(node, 0);
-	if (!reg)
+	if (IS_ERR(reg))
 		return;
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 728e253..5cdeed5 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -210,7 +210,7 @@ static void of_mux_clk_setup(struct device_node *node)
 
 	reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!reg)
+	if (IS_ERR(reg))
 		goto cleanup;
 
 	of_property_read_u32(node, "ti,bit-shift", &shift);
@@ -283,7 +283,7 @@ static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
 
 	mux->reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!mux->reg)
+	if (IS_ERR(mux->reg))
 		goto cleanup;
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
-- 
1.7.9.5

[PATCHv4 08/35] clk: ti: fix ti_clk_get_reg_addr error handling

[Tero Kristo]

There is a case where NULL can be a valid return value for
ti_clk_get_reg_addr, specifically the case where both the provider index
and register offsets are zero. In this case, the current error checking
against a NULL pointer will fail. Thus, change the API to return a
ERR_PTR value in an error case, and change all the users of this API to
check against IS_ERR instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Michael Turquette <mturquette@linaro.org>
---
 drivers/clk/ti/apll.c      |    5 +++--
 drivers/clk/ti/autoidle.c  |    2 +-
 drivers/clk/ti/clk.c       |    7 ++++---
 drivers/clk/ti/divider.c   |    4 ++--
 drivers/clk/ti/dpll.c      |    6 +++---
 drivers/clk/ti/gate.c      |    4 ++--
 drivers/clk/ti/interface.c |    2 +-
 drivers/clk/ti/mux.c       |    4 ++--
 8 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 72d9727..49baf38 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -203,7 +203,7 @@ static void __init of_dra7_apll_setup(struct device_node *node)
 	ad->control_reg = ti_clk_get_reg_addr(node, 0);
 	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
 
-	if (!ad->control_reg || !ad->idlest_reg)
+	if (IS_ERR(ad->control_reg) || IS_ERR(ad->idlest_reg))
 		goto cleanup;
 
 	ad->idlest_mask = 0x1;
@@ -384,7 +384,8 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
 	ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
 
-	if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
+	if (IS_ERR(ad->control_reg) || IS_ERR(ad->autoidle_reg) ||
+	    IS_ERR(ad->idlest_reg))
 		goto cleanup;
 
 	clk = clk_register(NULL, &clk_hw->hw);
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 8912ff8..e75c64c 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -119,7 +119,7 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 	clk->name = node->name;
 	clk->reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!clk->reg) {
+	if (IS_ERR(clk->reg)) {
 		kfree(clk);
 		return -EINVAL;
 	}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index e22b956..0ebe5c5 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -103,7 +103,8 @@ int __init ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
  * @index: register index from the clock node
  *
  * Builds clock register address from device tree information. This
- * is a struct of type clk_omap_reg.
+ * is a struct of type clk_omap_reg. Returns a pointer to the register
+ * address, or a pointer error value in failure.
  */
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
 {
@@ -121,14 +122,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
 
 	if (i == CLK_MAX_MEMMAPS) {
 		pr_err("clk-provider not found for %s!\n", node->name);
-		return NULL;
+		return ERR_PTR(-ENOENT);
 	}
 
 	reg->index = i;
 
 	if (of_property_read_u32_index(node, "reg", index, &val)) {
 		pr_err("%s must have reg[%d]!\n", node->name, index);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	reg->offset = val;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 6211893..ff5f117 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -530,8 +530,8 @@ static int __init ti_clk_divider_populate(struct device_node *node,
 	u32 val;
 
 	*reg = ti_clk_get_reg_addr(node, 0);
-	if (!*reg)
-		return -EINVAL;
+	if (IS_ERR(*reg))
+		return PTR_ERR(*reg);
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
 		*shift = val;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 81dc469..11478a5 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -390,18 +390,18 @@ static void __init of_ti_dpll_setup(struct device_node *node,
 #endif
 	} else {
 		dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
-		if (!dd->idlest_reg)
+		if (IS_ERR(dd->idlest_reg))
 			goto cleanup;
 
 		dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
 	}
 
-	if (!dd->control_reg || !dd->mult_div1_reg)
+	if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
 		goto cleanup;
 
 	if (dd->autoidle_mask) {
 		dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
-		if (!dd->autoidle_reg)
+		if (IS_ERR(dd->autoidle_reg))
 			goto cleanup;
 	}
 
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index d493307..0c6fdfc 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -225,7 +225,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 
 	if (ops != &omap_gate_clkdm_clk_ops) {
 		reg = ti_clk_get_reg_addr(node, 0);
-		if (!reg)
+		if (IS_ERR(reg))
 			return;
 
 		if (!of_property_read_u32(node, "ti,bit-shift", &val))
@@ -264,7 +264,7 @@ _of_ti_composite_gate_clk_setup(struct device_node *node,
 		return;
 
 	gate->enable_reg = ti_clk_get_reg_addr(node, 0);
-	if (!gate->enable_reg)
+	if (IS_ERR(gate->enable_reg))
 		goto cleanup;
 
 	of_property_read_u32(node, "ti,bit-shift", &val);
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 265d91f..c76230d 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -111,7 +111,7 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 	u32 val;
 
 	reg = ti_clk_get_reg_addr(node, 0);
-	if (!reg)
+	if (IS_ERR(reg))
 		return;
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 728e253..5cdeed5 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -210,7 +210,7 @@ static void of_mux_clk_setup(struct device_node *node)
 
 	reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!reg)
+	if (IS_ERR(reg))
 		goto cleanup;
 
 	of_property_read_u32(node, "ti,bit-shift", &shift);
@@ -283,7 +283,7 @@ static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
 
 	mux->reg = ti_clk_get_reg_addr(node, 0);
 
-	if (!mux->reg)
+	if (IS_ERR(mux->reg))
 		goto cleanup;
 
 	if (!of_property_read_u32(node, "ti,bit-shift", &val))
-- 
1.7.9.5

[PATCHv4 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs

[Tero Kristo]

These PRCM nodes were earlier added in patch 7800064ba5 ("ARM: dts: Add
basic dm816x device tree configuration"), but the documentation for
the same wasn't added. Fix this by adding the missing compatible strings
under the generic prcm.txt document.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/prcm.txt          |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 79074da..68f96f8 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -29,6 +29,10 @@ Required properties:
 		"ti,dra7-prm"
 		"ti,dra7-cm-core-aon"
 		"ti,dra7-cm-core"
+		"ti,dm814-prcm"
+		"ti,dm814-scrm"
+		"ti,dm816-prcm"
+		"ti,dm816-scrm"
 - reg:		Contains PRCM module register address range
 		(base address and length)
 - clocks:	clocks for this module
-- 
1.7.9.5

[PATCHv4 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs

[Tero Kristo]

These PRCM nodes were earlier added in patch 7800064ba5 ("ARM: dts: Add
basic dm816x device tree configuration"), but the documentation for
the same wasn't added. Fix this by adding the missing compatible strings
under the generic prcm.txt document.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/prcm.txt          |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 79074da..68f96f8 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -29,6 +29,10 @@ Required properties:
 		"ti,dra7-prm"
 		"ti,dra7-cm-core-aon"
 		"ti,dra7-cm-core"
+		"ti,dm814-prcm"
+		"ti,dm814-scrm"
+		"ti,dm816-prcm"
+		"ti,dm816-scrm"
 - reg:		Contains PRCM module register address range
 		(base address and length)
 - clocks:	clocks for this module
-- 
1.7.9.5

[PATCHv4 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices

[Tero Kristo]

All clock provider related drivers will now register their iomaps
with a static index. This makes it easier to split up the individual
drivers to their own files in subsequent patches.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    8 ++++
 arch/arm/mach-omap2/prm_common.c  |   79 +++++++++++++++++++++++--------------
 include/linux/clk/ti.h            |    1 +
 3 files changed, 59 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6163d66..ee38356 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -518,6 +518,14 @@ struct omap_prcm_irq_setup {
 	.priority = _priority				\
 	}
 
+/**
+ * struct omap_prcm_init_data - PRCM driver init data
+ * @index: clock memory mapping index to be used
+ */
+struct omap_prcm_init_data {
+	int index;
+};
+
 extern void omap_prcm_irq_cleanup(void);
 extern int omap_prcm_register_chain_handler(
 	struct omap_prcm_irq_setup *irq_setup);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 79cee11..8ec5201 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -633,31 +633,47 @@ int prm_unregister(struct prm_ll_data *pld)
 	return 0;
 }
 
+static struct omap_prcm_init_data prm_data = {
+	.index = TI_CLKM_PRM,
+};
+
+static struct omap_prcm_init_data cm_data = {
+	.index = TI_CLKM_CM,
+};
+
+static struct omap_prcm_init_data cm2_data = {
+	.index = TI_CLKM_CM2,
+};
+
+static struct omap_prcm_init_data scrm_data = {
+	.index = TI_CLKM_SCRM,
+};
+
 static const struct of_device_id omap_prcm_dt_match_table[] = {
-	{ .compatible = "ti,am3-prcm" },
-	{ .compatible = "ti,am3-scrm" },
-	{ .compatible = "ti,am4-prcm" },
-	{ .compatible = "ti,am4-scrm" },
-	{ .compatible = "ti,dm814-prcm" },
-	{ .compatible = "ti,dm814-scrm" },
-	{ .compatible = "ti,dm816-prcm" },
-	{ .compatible = "ti,dm816-scrm" },
-	{ .compatible = "ti,omap2-prcm" },
-	{ .compatible = "ti,omap2-scrm" },
-	{ .compatible = "ti,omap3-prm" },
-	{ .compatible = "ti,omap3-cm" },
-	{ .compatible = "ti,omap3-scrm" },
-	{ .compatible = "ti,omap4-cm1" },
-	{ .compatible = "ti,omap4-prm" },
-	{ .compatible = "ti,omap4-cm2" },
-	{ .compatible = "ti,omap4-scrm" },
-	{ .compatible = "ti,omap5-prm" },
-	{ .compatible = "ti,omap5-cm-core-aon" },
-	{ .compatible = "ti,omap5-scrm" },
-	{ .compatible = "ti,omap5-cm-core" },
-	{ .compatible = "ti,dra7-prm" },
-	{ .compatible = "ti,dra7-cm-core-aon" },
-	{ .compatible = "ti,dra7-cm-core" },
+	{ .compatible = "ti,am3-prcm", .data = &prm_data },
+	{ .compatible = "ti,am3-scrm", .data = &scrm_data },
+	{ .compatible = "ti,am4-prcm", .data = &prm_data },
+	{ .compatible = "ti,am4-scrm", .data = &scrm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
+	{ .compatible = "ti,dm814-scrm", .data = &scrm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
+	{ .compatible = "ti,dm816-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
+	{ .compatible = "ti,omap2-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap3-prm", .data = &prm_data },
+	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap3-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
+	{ .compatible = "ti,omap4-prm", .data = &prm_data },
+	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
+	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap5-prm", .data = &prm_data },
+	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,dra7-prm", .data = &prm_data },
+	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
 	{ }
 };
 
@@ -690,15 +706,20 @@ int __init omap_prcm_init(void)
 {
 	struct device_node *np;
 	void __iomem *mem;
-	int memmap_index = 0;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
 
 	ti_clk_ll_ops = &omap_clk_ll_ops;
 
-	for_each_matching_node(np, omap_prcm_dt_match_table) {
+	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+		data = match->data;
+
 		mem = of_iomap(np, 0);
-		clk_memmaps[memmap_index] = mem;
-		ti_dt_clk_init_provider(np, memmap_index);
-		memmap_index++;
+		if (!mem)
+			return -ENOMEM;
+
+		clk_memmaps[data->index] = mem;
+		ti_dt_clk_init_provider(np, data->index);
 	}
 
 	return 0;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6784400..19895a3 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -221,6 +221,7 @@ struct ti_dt_clk {
 /* Static memmap indices */
 enum {
 	TI_CLKM_CM = 0,
+	TI_CLKM_CM2,
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
 };
-- 
1.7.9.5

[PATCHv4 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices

[Tero Kristo]

All clock provider related drivers will now register their iomaps
with a static index. This makes it easier to split up the individual
drivers to their own files in subsequent patches.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    8 ++++
 arch/arm/mach-omap2/prm_common.c  |   79 +++++++++++++++++++++++--------------
 include/linux/clk/ti.h            |    1 +
 3 files changed, 59 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6163d66..ee38356 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -518,6 +518,14 @@ struct omap_prcm_irq_setup {
 	.priority = _priority				\
 	}
 
+/**
+ * struct omap_prcm_init_data - PRCM driver init data
+ * @index: clock memory mapping index to be used
+ */
+struct omap_prcm_init_data {
+	int index;
+};
+
 extern void omap_prcm_irq_cleanup(void);
 extern int omap_prcm_register_chain_handler(
 	struct omap_prcm_irq_setup *irq_setup);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 79cee11..8ec5201 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -633,31 +633,47 @@ int prm_unregister(struct prm_ll_data *pld)
 	return 0;
 }
 
+static struct omap_prcm_init_data prm_data = {
+	.index = TI_CLKM_PRM,
+};
+
+static struct omap_prcm_init_data cm_data = {
+	.index = TI_CLKM_CM,
+};
+
+static struct omap_prcm_init_data cm2_data = {
+	.index = TI_CLKM_CM2,
+};
+
+static struct omap_prcm_init_data scrm_data = {
+	.index = TI_CLKM_SCRM,
+};
+
 static const struct of_device_id omap_prcm_dt_match_table[] = {
-	{ .compatible = "ti,am3-prcm" },
-	{ .compatible = "ti,am3-scrm" },
-	{ .compatible = "ti,am4-prcm" },
-	{ .compatible = "ti,am4-scrm" },
-	{ .compatible = "ti,dm814-prcm" },
-	{ .compatible = "ti,dm814-scrm" },
-	{ .compatible = "ti,dm816-prcm" },
-	{ .compatible = "ti,dm816-scrm" },
-	{ .compatible = "ti,omap2-prcm" },
-	{ .compatible = "ti,omap2-scrm" },
-	{ .compatible = "ti,omap3-prm" },
-	{ .compatible = "ti,omap3-cm" },
-	{ .compatible = "ti,omap3-scrm" },
-	{ .compatible = "ti,omap4-cm1" },
-	{ .compatible = "ti,omap4-prm" },
-	{ .compatible = "ti,omap4-cm2" },
-	{ .compatible = "ti,omap4-scrm" },
-	{ .compatible = "ti,omap5-prm" },
-	{ .compatible = "ti,omap5-cm-core-aon" },
-	{ .compatible = "ti,omap5-scrm" },
-	{ .compatible = "ti,omap5-cm-core" },
-	{ .compatible = "ti,dra7-prm" },
-	{ .compatible = "ti,dra7-cm-core-aon" },
-	{ .compatible = "ti,dra7-cm-core" },
+	{ .compatible = "ti,am3-prcm", .data = &prm_data },
+	{ .compatible = "ti,am3-scrm", .data = &scrm_data },
+	{ .compatible = "ti,am4-prcm", .data = &prm_data },
+	{ .compatible = "ti,am4-scrm", .data = &scrm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
+	{ .compatible = "ti,dm814-scrm", .data = &scrm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
+	{ .compatible = "ti,dm816-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
+	{ .compatible = "ti,omap2-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap3-prm", .data = &prm_data },
+	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap3-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
+	{ .compatible = "ti,omap4-prm", .data = &prm_data },
+	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
+	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap5-prm", .data = &prm_data },
+	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
+	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,dra7-prm", .data = &prm_data },
+	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
 	{ }
 };
 
@@ -690,15 +706,20 @@ int __init omap_prcm_init(void)
 {
 	struct device_node *np;
 	void __iomem *mem;
-	int memmap_index = 0;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
 
 	ti_clk_ll_ops = &omap_clk_ll_ops;
 
-	for_each_matching_node(np, omap_prcm_dt_match_table) {
+	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+		data = match->data;
+
 		mem = of_iomap(np, 0);
-		clk_memmaps[memmap_index] = mem;
-		ti_dt_clk_init_provider(np, memmap_index);
-		memmap_index++;
+		if (!mem)
+			return -ENOMEM;
+
+		clk_memmaps[data->index] = mem;
+		ti_dt_clk_init_provider(np, data->index);
 	}
 
 	return 0;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6784400..19895a3 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -221,6 +221,7 @@ struct ti_dt_clk {
 /* Static memmap indices */
 enum {
 	TI_CLKM_CM = 0,
+	TI_CLKM_CM2,
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
 };
-- 
1.7.9.5

[PATCHv4 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver

[Tero Kristo]

Splits the clock provider init out of the PRM driver and moves it to
clock driver. This is needed so that once the PRCM drivers are separated,
they can logically just access the clock driver not needing to go through
common PRM code. This would be wrong in the case of control module for
example.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c      |   75 ++++++++++++++++++++++++++++++++------
 arch/arm/mach-omap2/clock.h      |    6 ++-
 arch/arm/mach-omap2/prm_common.c |   36 ++++--------------
 3 files changed, 76 insertions(+), 41 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6124db5..3327128 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <linux/of_address.h>
 #include <asm/cpu.h>
 
 #include <trace/events/power.h>
@@ -72,32 +73,84 @@ struct ti_clk_features ti_clk_features;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
-void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+static void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+
+	writel_relaxed(val, clk_memmaps[r->index] + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+
+	return readl_relaxed(clk_memmaps[r->index] + r->offset);
+}
 
 void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
 {
-	if (clk->flags & MEMMAP_ADDRESSING) {
-		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-		writel_relaxed(val, clk_memmaps[r->index] + r->offset);
-	} else {
+	if (clk->flags & MEMMAP_ADDRESSING)
+		clk_memmap_writel(val, reg);
+	else
 		writel_relaxed(val, reg);
-	}
 }
 
 u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
 {
 	u32 val;
 
-	if (clk->flags & MEMMAP_ADDRESSING) {
-		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-		val = readl_relaxed(clk_memmaps[r->index] + r->offset);
-	} else {
+	if (clk->flags & MEMMAP_ADDRESSING)
+		val = clk_memmap_readl(reg);
+	else
 		val = readl_relaxed(reg);
-	}
 
 	return val;
 }
 
+static struct ti_clk_ll_ops omap_clk_ll_ops = {
+	.clk_readl = clk_memmap_readl,
+	.clk_writel = clk_memmap_writel,
+};
+
+/**
+ * omap2_clk_provider_init - initialize a clock provider
+ * @match_table: DT device table to match for devices to init
+ * @np: device node pointer for the this clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a clock provider module (CM/PRM etc.), registering
+ * the memory mapping at specified index and initializing the
+ * low level driver infrastructure. Returns 0 in success.
+ */
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+				   void __iomem *mem)
+{
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	clk_memmaps[index] = mem;
+
+	ti_dt_clk_init_provider(np, index);
+
+	return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	clk_memmaps[index] = mem;
+}
+
 /*
  * OMAP2+ specific clock functions
  */
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a56742f..b6433fc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -271,10 +271,12 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
-extern void __iomem *clk_memmaps[];
-
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+				   void __iomem *mem);
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
 void __init ti_clk_init_features(void);
 #endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 8ec5201..1bfd00e 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -677,25 +677,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ }
 };
 
-static struct clk_hw_omap memmap_dummy_ck = {
-	.flags = MEMMAP_ADDRESSING,
-};
-
-static u32 prm_clk_readl(void __iomem *reg)
-{
-	return omap2_clk_readl(&memmap_dummy_ck, reg);
-}
-
-static void prm_clk_writel(u32 val, void __iomem *reg)
-{
-	omap2_clk_writel(val, &memmap_dummy_ck, reg);
-}
-
-static struct ti_clk_ll_ops omap_clk_ll_ops = {
-	.clk_readl = prm_clk_readl,
-	.clk_writel = prm_clk_writel,
-};
-
 /**
  * omap_prcm_init - low level init for the PRCM drivers
  *
@@ -708,8 +689,7 @@ int __init omap_prcm_init(void)
 	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
+	int ret;
 
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
@@ -718,8 +698,9 @@ int __init omap_prcm_init(void)
 		if (!mem)
 			return -ENOMEM;
 
-		clk_memmaps[data->index] = mem;
-		ti_dt_clk_init_provider(np, data->index);
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
@@ -727,11 +708,10 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD;
-	clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD;
-	clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get();
+	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
+	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+				       prm_base + OMAP3430_IVA2_MOD);
+	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
 }
 
 static int __init prm_late_init(void)
-- 
1.7.9.5

[PATCHv4 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver

[Tero Kristo]

Splits the clock provider init out of the PRM driver and moves it to
clock driver. This is needed so that once the PRCM drivers are separated,
they can logically just access the clock driver not needing to go through
common PRM code. This would be wrong in the case of control module for
example.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c      |   75 ++++++++++++++++++++++++++++++++------
 arch/arm/mach-omap2/clock.h      |    6 ++-
 arch/arm/mach-omap2/prm_common.c |   36 ++++--------------
 3 files changed, 76 insertions(+), 41 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6124db5..3327128 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <linux/of_address.h>
 #include <asm/cpu.h>
 
 #include <trace/events/power.h>
@@ -72,32 +73,84 @@ struct ti_clk_features ti_clk_features;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
-void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+static void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+
+	writel_relaxed(val, clk_memmaps[r->index] + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+
+	return readl_relaxed(clk_memmaps[r->index] + r->offset);
+}
 
 void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
 {
-	if (clk->flags & MEMMAP_ADDRESSING) {
-		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-		writel_relaxed(val, clk_memmaps[r->index] + r->offset);
-	} else {
+	if (clk->flags & MEMMAP_ADDRESSING)
+		clk_memmap_writel(val, reg);
+	else
 		writel_relaxed(val, reg);
-	}
 }
 
 u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
 {
 	u32 val;
 
-	if (clk->flags & MEMMAP_ADDRESSING) {
-		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-		val = readl_relaxed(clk_memmaps[r->index] + r->offset);
-	} else {
+	if (clk->flags & MEMMAP_ADDRESSING)
+		val = clk_memmap_readl(reg);
+	else
 		val = readl_relaxed(reg);
-	}
 
 	return val;
 }
 
+static struct ti_clk_ll_ops omap_clk_ll_ops = {
+	.clk_readl = clk_memmap_readl,
+	.clk_writel = clk_memmap_writel,
+};
+
+/**
+ * omap2_clk_provider_init - initialize a clock provider
+ * @match_table: DT device table to match for devices to init
+ * @np: device node pointer for the this clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a clock provider module (CM/PRM etc.), registering
+ * the memory mapping at specified index and initializing the
+ * low level driver infrastructure. Returns 0 in success.
+ */
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+				   void __iomem *mem)
+{
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	clk_memmaps[index] = mem;
+
+	ti_dt_clk_init_provider(np, index);
+
+	return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	clk_memmaps[index] = mem;
+}
+
 /*
  * OMAP2+ specific clock functions
  */
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a56742f..b6433fc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -271,10 +271,12 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
-extern void __iomem *clk_memmaps[];
-
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+				   void __iomem *mem);
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
 void __init ti_clk_init_features(void);
 #endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 8ec5201..1bfd00e 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -677,25 +677,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ }
 };
 
-static struct clk_hw_omap memmap_dummy_ck = {
-	.flags = MEMMAP_ADDRESSING,
-};
-
-static u32 prm_clk_readl(void __iomem *reg)
-{
-	return omap2_clk_readl(&memmap_dummy_ck, reg);
-}
-
-static void prm_clk_writel(u32 val, void __iomem *reg)
-{
-	omap2_clk_writel(val, &memmap_dummy_ck, reg);
-}
-
-static struct ti_clk_ll_ops omap_clk_ll_ops = {
-	.clk_readl = prm_clk_readl,
-	.clk_writel = prm_clk_writel,
-};
-
 /**
  * omap_prcm_init - low level init for the PRCM drivers
  *
@@ -708,8 +689,7 @@ int __init omap_prcm_init(void)
 	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
+	int ret;
 
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
@@ -718,8 +698,9 @@ int __init omap_prcm_init(void)
 		if (!mem)
 			return -ENOMEM;
 
-		clk_memmaps[data->index] = mem;
-		ti_dt_clk_init_provider(np, data->index);
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
@@ -727,11 +708,10 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD;
-	clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD;
-	clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get();
+	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
+	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+				       prm_base + OMAP3430_IVA2_MOD);
+	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
 }
 
 static int __init prm_late_init(void)
-- 
1.7.9.5

[PATCHv4 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files

[Tero Kristo]

Splits the clock related provider module inits under their own driver files.
Previously this was done for all modules under the common PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm.h         |    1 +
 arch/arm/mach-omap2/cm_common.c  |   51 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.c    |   47 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.h    |    1 +
 arch/arm/mach-omap2/io.c         |    4 +++
 arch/arm/mach-omap2/prm_common.c |   23 ++---------------
 include/linux/clk/ti.h           |    5 ++--
 7 files changed, 108 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 6222e87..748ac33 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -70,6 +70,7 @@ int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
 int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
+int omap_cm_init(void);
 
 # endif
 
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 8fe02fce..f3d578b 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -15,10 +15,13 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "cm2xxx.h"
 #include "cm3xxx.h"
 #include "cm44xx.h"
+#include "clock.h"
 
 /*
  * cm_ll_data: function pointers to SoC-specific implementations of
@@ -212,3 +215,51 @@ int cm_unregister(struct cm_ll_data *cld)
 
 	return 0;
 }
+
+static struct omap_prcm_init_data cm_data = {
+	.index = TI_CLKM_CM,
+};
+
+static struct omap_prcm_init_data cm2_data = {
+	.index = TI_CLKM_CM2,
+};
+
+static const struct of_device_id omap_cm_dt_match_table[] = {
+	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
+	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
+	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+	{ }
+};
+
+/**
+ * omap_cm_init - low level init for the CM drivers
+ *
+ * Initializes the low level clock infrastructure for CM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_cm_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
+	int ret;
+
+	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+		data = match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index da041b4..e881824 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include "soc.h"
 #include "iomap.h"
@@ -25,6 +26,7 @@
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
+#include "clock.h"
 
 /* Used by omap3_ctrl_save_padconf() */
 #define START_PADCONF_SAVE		0x2
@@ -611,3 +613,48 @@ void __init omap3_ctrl_init(void)
 	omap3_ctrl_setup_d2d_padconf();
 }
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+struct control_init_data {
+	int index;
+};
+
+static struct control_init_data ctrl_data = {
+	.index = TI_CLKM_CTRL,
+};
+
+static const struct of_device_id omap_scrm_dt_match_table[] = {
+	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap2-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ }
+};
+
+/**
+ * omap_control_init - low level init for the control driver
+ *
+ * Initializes the low level clock infrastructure for control driver.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_control_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
+	int ret;
+
+	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+		data = match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8a4871..baf5783 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -464,6 +464,7 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
+int omap_control_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 460da22..46640c0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -756,6 +756,10 @@ int __init omap_clk_init(void)
 	ti_clk_init_features();
 
 	if (of_have_populated_dt()) {
+		ret = omap_control_init();
+		if (ret)
+			return ret;
+
 		ret = omap_prcm_init();
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 1bfd00e..6cbebbe 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -637,43 +637,22 @@ static struct omap_prcm_init_data prm_data = {
 	.index = TI_CLKM_PRM,
 };
 
-static struct omap_prcm_init_data cm_data = {
-	.index = TI_CLKM_CM,
-};
-
-static struct omap_prcm_init_data cm2_data = {
-	.index = TI_CLKM_CM2,
-};
-
 static struct omap_prcm_init_data scrm_data = {
 	.index = TI_CLKM_SCRM,
 };
 
 static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ .compatible = "ti,am3-prcm", .data = &prm_data },
-	{ .compatible = "ti,am3-scrm", .data = &scrm_data },
 	{ .compatible = "ti,am4-prcm", .data = &prm_data },
-	{ .compatible = "ti,am4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm814-scrm", .data = &scrm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm816-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap2-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap3-prm", .data = &prm_data },
-	{ .compatible = "ti,omap3-cm", .data = &cm_data },
-	{ .compatible = "ti,omap3-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
 	{ .compatible = "ti,omap4-prm", .data = &prm_data },
-	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap5-prm", .data = &prm_data },
-	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
 	{ .compatible = "ti,dra7-prm", .data = &prm_data },
-	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
-	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
 	{ }
 };
 
@@ -703,6 +682,8 @@ int __init omap_prcm_init(void)
 			return ret;
 	}
 
+	omap_cm_init();
+
 	return 0;
 }
 
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 19895a3..79b76e1 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -215,15 +215,14 @@ struct ti_dt_clk {
 		.node_name = name,	\
 	}
 
-/* Maximum number of clock memmaps */
-#define CLK_MAX_MEMMAPS			4
-
 /* Static memmap indices */
 enum {
 	TI_CLKM_CM = 0,
 	TI_CLKM_CM2,
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
+	TI_CLKM_CTRL,
+	CLK_MAX_MEMMAPS
 };
 
 typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-- 
1.7.9.5

[PATCHv4 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files

[Tero Kristo]

Splits the clock related provider module inits under their own driver files.
Previously this was done for all modules under the common PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm.h         |    1 +
 arch/arm/mach-omap2/cm_common.c  |   51 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.c    |   47 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.h    |    1 +
 arch/arm/mach-omap2/io.c         |    4 +++
 arch/arm/mach-omap2/prm_common.c |   23 ++---------------
 include/linux/clk/ti.h           |    5 ++--
 7 files changed, 108 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 6222e87..748ac33 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -70,6 +70,7 @@ int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
 int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
+int omap_cm_init(void);
 
 # endif
 
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 8fe02fce..f3d578b 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -15,10 +15,13 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "cm2xxx.h"
 #include "cm3xxx.h"
 #include "cm44xx.h"
+#include "clock.h"
 
 /*
  * cm_ll_data: function pointers to SoC-specific implementations of
@@ -212,3 +215,51 @@ int cm_unregister(struct cm_ll_data *cld)
 
 	return 0;
 }
+
+static struct omap_prcm_init_data cm_data = {
+	.index = TI_CLKM_CM,
+};
+
+static struct omap_prcm_init_data cm2_data = {
+	.index = TI_CLKM_CM2,
+};
+
+static const struct of_device_id omap_cm_dt_match_table[] = {
+	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
+	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
+	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+	{ }
+};
+
+/**
+ * omap_cm_init - low level init for the CM drivers
+ *
+ * Initializes the low level clock infrastructure for CM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_cm_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
+	int ret;
+
+	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+		data = match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index da041b4..e881824 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include "soc.h"
 #include "iomap.h"
@@ -25,6 +26,7 @@
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
+#include "clock.h"
 
 /* Used by omap3_ctrl_save_padconf() */
 #define START_PADCONF_SAVE		0x2
@@ -611,3 +613,48 @@ void __init omap3_ctrl_init(void)
 	omap3_ctrl_setup_d2d_padconf();
 }
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+struct control_init_data {
+	int index;
+};
+
+static struct control_init_data ctrl_data = {
+	.index = TI_CLKM_CTRL,
+};
+
+static const struct of_device_id omap_scrm_dt_match_table[] = {
+	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap2-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ }
+};
+
+/**
+ * omap_control_init - low level init for the control driver
+ *
+ * Initializes the low level clock infrastructure for control driver.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_control_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	const struct of_device_id *match;
+	const struct omap_prcm_init_data *data;
+	int ret;
+
+	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+		data = match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		ret = omap2_clk_provider_init(np, data->index, mem);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8a4871..baf5783 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -464,6 +464,7 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
+int omap_control_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 460da22..46640c0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -756,6 +756,10 @@ int __init omap_clk_init(void)
 	ti_clk_init_features();
 
 	if (of_have_populated_dt()) {
+		ret = omap_control_init();
+		if (ret)
+			return ret;
+
 		ret = omap_prcm_init();
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 1bfd00e..6cbebbe 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -637,43 +637,22 @@ static struct omap_prcm_init_data prm_data = {
 	.index = TI_CLKM_PRM,
 };
 
-static struct omap_prcm_init_data cm_data = {
-	.index = TI_CLKM_CM,
-};
-
-static struct omap_prcm_init_data cm2_data = {
-	.index = TI_CLKM_CM2,
-};
-
 static struct omap_prcm_init_data scrm_data = {
 	.index = TI_CLKM_SCRM,
 };
 
 static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ .compatible = "ti,am3-prcm", .data = &prm_data },
-	{ .compatible = "ti,am3-scrm", .data = &scrm_data },
 	{ .compatible = "ti,am4-prcm", .data = &prm_data },
-	{ .compatible = "ti,am4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm814-scrm", .data = &scrm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm816-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap2-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap3-prm", .data = &prm_data },
-	{ .compatible = "ti,omap3-cm", .data = &cm_data },
-	{ .compatible = "ti,omap3-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
 	{ .compatible = "ti,omap4-prm", .data = &prm_data },
-	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap5-prm", .data = &prm_data },
-	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
 	{ .compatible = "ti,dra7-prm", .data = &prm_data },
-	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
-	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
 	{ }
 };
 
@@ -703,6 +682,8 @@ int __init omap_prcm_init(void)
 			return ret;
 	}
 
+	omap_cm_init();
+
 	return 0;
 }
 
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 19895a3..79b76e1 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -215,15 +215,14 @@ struct ti_dt_clk {
 		.node_name = name,	\
 	}
 
-/* Maximum number of clock memmaps */
-#define CLK_MAX_MEMMAPS			4
-
 /* Static memmap indices */
 enum {
 	TI_CLKM_CM = 0,
 	TI_CLKM_CM2,
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
+	TI_CLKM_CTRL,
+	CLK_MAX_MEMMAPS
 };
 
 typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-- 
1.7.9.5

[PATCHv4 13/35] ARM: OMAP2+: CM: determine CM base address from device tree

[Tero Kristo]

There is no need to provide the CM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the CM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm.h          |    1 +
 arch/arm/mach-omap2/cm2xxx.c      |    1 +
 arch/arm/mach-omap2/cm33xx.c      |    1 +
 arch/arm/mach-omap2/cm3xxx.c      |    2 +
 arch/arm/mach-omap2/cm_common.c   |   73 ++++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/cminst44xx.c  |    1 +
 arch/arm/mach-omap2/io.c          |   14 +------
 arch/arm/mach-omap2/prcm-common.h |    6 +++
 arch/arm/mach-omap2/prm_common.c  |    1 -
 9 files changed, 81 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 748ac33..1fe3e6b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -71,6 +71,7 @@ int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
 int omap_cm_init(void);
+int omap2_cm_base_init(void);
 
 # endif
 
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index ef62ac9..f18c844 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -395,6 +395,7 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 
 int __init omap2xxx_cm_init(void)
 {
+	omap2_cm_base_init();
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index cc5aac7..221bca3 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -354,6 +354,7 @@ static struct cm_ll_data am33xx_cm_ll_data = {
 
 int __init am33xx_cm_init(void)
 {
+	omap2_cm_base_init();
 	return cm_register(&am33xx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index ebead8f..88e6cb6 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -673,6 +673,8 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 
 int __init omap3xxx_cm_init(void)
 {
+	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
+	omap2_cm_base_init();
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index f3d578b..32af8fc 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -36,6 +36,8 @@ void __iomem *cm_base;
 /* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
 void __iomem *cm2_base;
 
+#define CM_NO_CLOCKS		0x1
+
 /**
  * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
  * @cm: CM base virtual address
@@ -224,18 +226,79 @@ static struct omap_prcm_init_data cm2_data = {
 	.index = TI_CLKM_CM2,
 };
 
+static struct omap_prcm_init_data omap2_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
+static struct omap_prcm_init_data omap3_cm_data = {
+	.index = TI_CLKM_CM,
+
+	/*
+	 * IVA2 offset is a negative value, must offset the cm_base address
+	 * by this to get it to positive side on the iomap
+	 */
+	.offset = -OMAP3430_IVA2_MOD,
+};
+
+static struct omap_prcm_init_data am3_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
+static struct omap_prcm_init_data am4_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
 static const struct of_device_id omap_cm_dt_match_table[] = {
-	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
+	{ .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
 	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
 	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
 	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
 	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
 	{ }
 };
 
 /**
+ * omap2_cm_base_init - initialize iomappings for the CM drivers
+ *
+ * Detects and initializes the iomappings for the CM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_cm_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct omap_prcm_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+		data = (struct omap_prcm_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		if (data->index == TI_CLKM_CM)
+			cm_base = mem + data->offset;
+
+		if (data->index == TI_CLKM_CM2)
+			cm2_base = mem + data->offset;
+
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_cm_init - low level init for the CM drivers
  *
  * Initializes the low level clock infrastructure for CM drivers.
@@ -244,7 +307,6 @@ static const struct of_device_id omap_cm_dt_match_table[] = {
 int __init omap_cm_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -252,11 +314,10 @@ int __init omap_cm_init(void)
 	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
+		if (data->flags & CM_NO_CLOCKS)
+			continue;
 
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 9319034..4aed22d 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -516,6 +516,7 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 
 int __init omap4_cm_init(void)
 {
+	omap2_cm_base_init();
 	omap_cm_base_init();
 
 	return cm_register(&omap4xxx_cm_ll_data);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 46640c0..b43e09d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -387,7 +387,6 @@ void __init omap2420_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -417,7 +416,6 @@ void __init omap2430_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -451,6 +449,8 @@ void __init omap3_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+
+	/* XXX: remove this once OMAP3 is DT only */
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
@@ -552,7 +552,6 @@ void __init ti814x_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -573,7 +572,6 @@ void __init ti816x_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -596,7 +594,6 @@ void __init am33xx_init_early(void)
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
-	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -622,7 +619,6 @@ void __init am43xx_init_early(void)
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
-	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -649,8 +645,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -682,8 +676,6 @@ void __init omap5_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
@@ -712,8 +704,6 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index ee38356..9e4dd0b 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -521,9 +521,15 @@ struct omap_prcm_irq_setup {
 /**
  * struct omap_prcm_init_data - PRCM driver init data
  * @index: clock memory mapping index to be used
+ * @mem: IO mem pointer for this module
+ * @offset: module base address offset from the IO base
+ * @flags: PRCM module init flags
  */
 struct omap_prcm_init_data {
 	int index;
+	void __iomem *mem;
+	s16 offset;
+	u16 flags;
 };
 
 extern void omap_prcm_irq_cleanup(void);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6cbebbe..9f9c816 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -689,7 +689,6 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
 				       prm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
-- 
1.7.9.5

[PATCHv4 13/35] ARM: OMAP2+: CM: determine CM base address from device tree

[Tero Kristo]

There is no need to provide the CM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the CM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm.h          |    1 +
 arch/arm/mach-omap2/cm2xxx.c      |    1 +
 arch/arm/mach-omap2/cm33xx.c      |    1 +
 arch/arm/mach-omap2/cm3xxx.c      |    2 +
 arch/arm/mach-omap2/cm_common.c   |   73 ++++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/cminst44xx.c  |    1 +
 arch/arm/mach-omap2/io.c          |   14 +------
 arch/arm/mach-omap2/prcm-common.h |    6 +++
 arch/arm/mach-omap2/prm_common.c  |    1 -
 9 files changed, 81 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 748ac33..1fe3e6b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -71,6 +71,7 @@ int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
 int omap_cm_init(void);
+int omap2_cm_base_init(void);
 
 # endif
 
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index ef62ac9..f18c844 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -395,6 +395,7 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 
 int __init omap2xxx_cm_init(void)
 {
+	omap2_cm_base_init();
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index cc5aac7..221bca3 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -354,6 +354,7 @@ static struct cm_ll_data am33xx_cm_ll_data = {
 
 int __init am33xx_cm_init(void)
 {
+	omap2_cm_base_init();
 	return cm_register(&am33xx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index ebead8f..88e6cb6 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -673,6 +673,8 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 
 int __init omap3xxx_cm_init(void)
 {
+	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
+	omap2_cm_base_init();
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index f3d578b..32af8fc 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -36,6 +36,8 @@ void __iomem *cm_base;
 /* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
 void __iomem *cm2_base;
 
+#define CM_NO_CLOCKS		0x1
+
 /**
  * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
  * @cm: CM base virtual address
@@ -224,18 +226,79 @@ static struct omap_prcm_init_data cm2_data = {
 	.index = TI_CLKM_CM2,
 };
 
+static struct omap_prcm_init_data omap2_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
+static struct omap_prcm_init_data omap3_cm_data = {
+	.index = TI_CLKM_CM,
+
+	/*
+	 * IVA2 offset is a negative value, must offset the cm_base address
+	 * by this to get it to positive side on the iomap
+	 */
+	.offset = -OMAP3430_IVA2_MOD,
+};
+
+static struct omap_prcm_init_data am3_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
+static struct omap_prcm_init_data am4_prcm_data = {
+	.index = TI_CLKM_CM,
+	.flags = CM_NO_CLOCKS,
+};
+
 static const struct of_device_id omap_cm_dt_match_table[] = {
-	{ .compatible = "ti,omap3-cm", .data = &cm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
+	{ .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
 	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
 	{ .compatible = "ti,omap4-cm2", .data = &cm2_data },
 	{ .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,omap5-cm-core", .data = &cm2_data },
 	{ .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
 	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
 	{ }
 };
 
 /**
+ * omap2_cm_base_init - initialize iomappings for the CM drivers
+ *
+ * Detects and initializes the iomappings for the CM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_cm_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct omap_prcm_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+		data = (struct omap_prcm_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		if (data->index == TI_CLKM_CM)
+			cm_base = mem + data->offset;
+
+		if (data->index == TI_CLKM_CM2)
+			cm2_base = mem + data->offset;
+
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_cm_init - low level init for the CM drivers
  *
  * Initializes the low level clock infrastructure for CM drivers.
@@ -244,7 +307,6 @@ static const struct of_device_id omap_cm_dt_match_table[] = {
 int __init omap_cm_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -252,11 +314,10 @@ int __init omap_cm_init(void)
 	for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
+		if (data->flags & CM_NO_CLOCKS)
+			continue;
 
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 9319034..4aed22d 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -516,6 +516,7 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 
 int __init omap4_cm_init(void)
 {
+	omap2_cm_base_init();
 	omap_cm_base_init();
 
 	return cm_register(&omap4xxx_cm_ll_data);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 46640c0..b43e09d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -387,7 +387,6 @@ void __init omap2420_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -417,7 +416,6 @@ void __init omap2430_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -451,6 +449,8 @@ void __init omap3_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+
+	/* XXX: remove this once OMAP3 is DT only */
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
@@ -552,7 +552,6 @@ void __init ti814x_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -573,7 +572,6 @@ void __init ti816x_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -596,7 +594,6 @@ void __init am33xx_init_early(void)
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
-	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -622,7 +619,6 @@ void __init am43xx_init_early(void)
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
-	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -649,8 +645,6 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -682,8 +676,6 @@ void __init omap5_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
@@ -712,8 +704,6 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
-			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index ee38356..9e4dd0b 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -521,9 +521,15 @@ struct omap_prcm_irq_setup {
 /**
  * struct omap_prcm_init_data - PRCM driver init data
  * @index: clock memory mapping index to be used
+ * @mem: IO mem pointer for this module
+ * @offset: module base address offset from the IO base
+ * @flags: PRCM module init flags
  */
 struct omap_prcm_init_data {
 	int index;
+	void __iomem *mem;
+	s16 offset;
+	u16 flags;
 };
 
 extern void omap_prcm_irq_cleanup(void);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6cbebbe..9f9c816 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -689,7 +689,6 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
 				       prm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
-- 
1.7.9.5

[PATCHv4 14/35] ARM: OMAP2+: PRM: determine PRM base address from device tree

[Tero Kristo]

There is no need to provide the PRM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the PRM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c         |   12 +--------
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm2xxx.c    |    1 +
 arch/arm/mach-omap2/prm33xx.c    |    1 +
 arch/arm/mach-omap2/prm3xxx.c    |    5 ++++
 arch/arm/mach-omap2/prm44xx.c    |    1 +
 arch/arm/mach-omap2/prm_common.c |   51 +++++++++++++++++++++++++++++++-------
 7 files changed, 52 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index b43e09d..712dd42 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -386,7 +386,6 @@ void __init omap2420_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -415,7 +414,6 @@ void __init omap2430_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -448,9 +446,8 @@ void __init omap3_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
 				  NULL);
+	/* XXX: remove these two once OMAP3 is DT only */
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
-
-	/* XXX: remove this once OMAP3 is DT only */
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
@@ -551,7 +548,6 @@ void __init ti814x_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -571,7 +567,6 @@ void __init ti816x_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -593,7 +588,6 @@ void __init am33xx_init_early(void)
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -618,7 +612,6 @@ void __init am43xx_init_early(void)
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -644,7 +637,6 @@ void __init omap4430_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -675,7 +667,6 @@ void __init omap5_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
@@ -703,7 +694,6 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 4e390ec..6d0a808 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -20,6 +20,7 @@ extern void __iomem *prm_base;
 extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
+int omap2_prm_base_init(void);
 void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index bacb05e..29e203f 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -222,6 +222,7 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 
 int __init omap2xxx_prm_init(void)
 {
+	omap2_prm_base_init();
 	return prm_register(&omap2xxx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 02f6286..1e052aa 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -380,6 +380,7 @@ static struct prm_ll_data am33xx_prm_ll_data = {
 
 int __init am33xx_prm_init(void)
 {
+	omap2_prm_base_init();
 	return prm_register(&am33xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 2b478adc..a347993 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -29,6 +29,7 @@
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "clock.h"
 
 static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 static void omap3xxx_prm_ocp_barrier(void);
@@ -671,6 +672,10 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 
 int __init omap3xxx_prm_init(void)
 {
+	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+				       prm_base + OMAP3430_IVA2_MOD);
+	omap2_prm_base_init();
+
 	if (omap3_has_io_wakeup())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 6f647f6..b479a33 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -705,6 +705,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
+	omap2_prm_base_init();
 	omap_prm_base_init();
 
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 9f9c816..b23d232 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -637,6 +637,16 @@ static struct omap_prcm_init_data prm_data = {
 	.index = TI_CLKM_PRM,
 };
 
+static struct omap_prcm_init_data omap3_prm_data = {
+	.index = TI_CLKM_PRM,
+
+	/*
+	 * IVA2 offset is a negative value, must offset the prm_base
+	 * address by this to get it to positive
+	 */
+	.offset = -OMAP3430_IVA2_MOD,
+};
+
 static struct omap_prcm_init_data scrm_data = {
 	.index = TI_CLKM_SCRM,
 };
@@ -647,7 +657,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap3-prm", .data = &prm_data },
+	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap5-prm", .data = &prm_data },
@@ -657,6 +667,36 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 };
 
 /**
+ * omap2_prm_base_init - initialize iomappings for the PRM driver
+ *
+ * Detects and initializes the iomappings for the PRM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_prm_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct omap_prcm_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+		data = (struct omap_prcm_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		if (data->index == TI_CLKM_PRM)
+			prm_base = mem + data->offset;
+
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_prcm_init - low level init for the PRCM drivers
  *
  * Initializes the low level clock infrastructure for PRCM drivers.
@@ -665,7 +705,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 int __init omap_prcm_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -673,11 +712,7 @@ int __init omap_prcm_init(void)
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
-
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
@@ -689,8 +724,6 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
-				       prm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
 }
 
-- 
1.7.9.5

[PATCHv4 14/35] ARM: OMAP2+: PRM: determine PRM base address from device tree

[Tero Kristo]

There is no need to provide the PRM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the PRM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c         |   12 +--------
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm2xxx.c    |    1 +
 arch/arm/mach-omap2/prm33xx.c    |    1 +
 arch/arm/mach-omap2/prm3xxx.c    |    5 ++++
 arch/arm/mach-omap2/prm44xx.c    |    1 +
 arch/arm/mach-omap2/prm_common.c |   51 +++++++++++++++++++++++++++++++-------
 7 files changed, 52 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index b43e09d..712dd42 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -386,7 +386,6 @@ void __init omap2420_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -415,7 +414,6 @@ void __init omap2430_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -448,9 +446,8 @@ void __init omap3_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
 				  NULL);
+	/* XXX: remove these two once OMAP3 is DT only */
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
-
-	/* XXX: remove this once OMAP3 is DT only */
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
@@ -551,7 +548,6 @@ void __init ti814x_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -571,7 +567,6 @@ void __init ti816x_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -593,7 +588,6 @@ void __init am33xx_init_early(void)
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -618,7 +612,6 @@ void __init am43xx_init_early(void)
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
 	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
 				  NULL);
-	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
@@ -644,7 +637,6 @@ void __init omap4430_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -675,7 +667,6 @@ void __init omap5_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
@@ -703,7 +694,6 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 4e390ec..6d0a808 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -20,6 +20,7 @@ extern void __iomem *prm_base;
 extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
+int omap2_prm_base_init(void);
 void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index bacb05e..29e203f 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -222,6 +222,7 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 
 int __init omap2xxx_prm_init(void)
 {
+	omap2_prm_base_init();
 	return prm_register(&omap2xxx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 02f6286..1e052aa 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -380,6 +380,7 @@ static struct prm_ll_data am33xx_prm_ll_data = {
 
 int __init am33xx_prm_init(void)
 {
+	omap2_prm_base_init();
 	return prm_register(&am33xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 2b478adc..a347993 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -29,6 +29,7 @@
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "clock.h"
 
 static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 static void omap3xxx_prm_ocp_barrier(void);
@@ -671,6 +672,10 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 
 int __init omap3xxx_prm_init(void)
 {
+	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+				       prm_base + OMAP3430_IVA2_MOD);
+	omap2_prm_base_init();
+
 	if (omap3_has_io_wakeup())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 6f647f6..b479a33 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -705,6 +705,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
+	omap2_prm_base_init();
 	omap_prm_base_init();
 
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 9f9c816..b23d232 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -637,6 +637,16 @@ static struct omap_prcm_init_data prm_data = {
 	.index = TI_CLKM_PRM,
 };
 
+static struct omap_prcm_init_data omap3_prm_data = {
+	.index = TI_CLKM_PRM,
+
+	/*
+	 * IVA2 offset is a negative value, must offset the prm_base
+	 * address by this to get it to positive
+	 */
+	.offset = -OMAP3430_IVA2_MOD,
+};
+
 static struct omap_prcm_init_data scrm_data = {
 	.index = TI_CLKM_SCRM,
 };
@@ -647,7 +657,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap3-prm", .data = &prm_data },
+	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
 	{ .compatible = "ti,omap5-prm", .data = &prm_data },
@@ -657,6 +667,36 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 };
 
 /**
+ * omap2_prm_base_init - initialize iomappings for the PRM driver
+ *
+ * Detects and initializes the iomappings for the PRM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_prm_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct omap_prcm_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+		data = (struct omap_prcm_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		if (data->index == TI_CLKM_PRM)
+			prm_base = mem + data->offset;
+
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_prcm_init - low level init for the PRCM drivers
  *
  * Initializes the low level clock infrastructure for PRCM drivers.
@@ -665,7 +705,6 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 int __init omap_prcm_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -673,11 +712,7 @@ int __init omap_prcm_init(void)
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
-
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
@@ -689,8 +724,6 @@ int __init omap_prcm_init(void)
 
 void __init omap3_prcm_legacy_iomaps_init(void)
 {
-	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
-				       prm_base + OMAP3430_IVA2_MOD);
 	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
 }
 
-- 
1.7.9.5

[PATCHv4 15/35] ARM: OMAP2+: control: determine control module base address from DT

[Tero Kristo]

There is no need to provide the control module base address through a
low-level API from the low-level IO init, as this information is
available through DT. This patch adds a new API to initialize the
control module though, but mostly makes the old API obsolete. The
old API can be completely removed once OMAP3 is made DT only.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c    |   48 +++++++++++++++++++++++++++++++++-----
 arch/arm/mach-omap2/control.h    |    2 ++
 arch/arm/mach-omap2/io.c         |   34 +++++++++++++--------------
 arch/arm/mach-omap2/prm.h        |    1 -
 arch/arm/mach-omap2/prm_common.c |    5 ----
 5 files changed, 60 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index e881824..074c333 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -616,6 +616,7 @@ void __init omap3_ctrl_init(void)
 
 struct control_init_data {
 	int index;
+	void __iomem *mem;
 };
 
 static struct control_init_data ctrl_data = {
@@ -631,6 +632,34 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 };
 
 /**
+ * omap2_control_base_init - initialize iomappings for the control driver
+ *
+ * Detects and initializes the iomappings for the control driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_control_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct control_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+		data = (struct control_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		omap2_ctrl_base = mem;
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_control_init - low level init for the control driver
  *
  * Initializes the low level clock infrastructure for control driver.
@@ -639,7 +668,6 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 int __init omap_control_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -647,14 +675,22 @@ int __init omap_control_init(void)
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
-
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
 
 	return 0;
 }
+
+/**
+ * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
+ *
+ * Legacy iomap init for clock provider. Needed only by legacy boot mode,
+ * where the base addresses are not parsed from DT, but still required
+ * by the clock driver to be setup properly.
+ */
+void __init omap3_control_legacy_iomap_init(void)
+{
+	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index baf5783..c1057eb 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -464,9 +464,11 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
+int omap2_control_base_init(void);
 int omap_control_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
+void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 712dd42..622ee3b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -384,8 +384,7 @@ void __init omap2420_init_early(void)
 	omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -412,8 +411,7 @@ void __init omap2430_init_early(void)
 	omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -444,11 +442,15 @@ void __init omap3_init_early(void)
 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-				  NULL);
-	/* XXX: remove these two once OMAP3 is DT only */
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
+	/* XXX: remove these once OMAP3 is DT only */
+	if (!of_have_populated_dt()) {
+		omap2_set_globals_control(
+			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), NULL);
+		omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+		omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+				     NULL);
+	}
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
 	omap3xxx_prm_init();
@@ -459,7 +461,7 @@ void __init omap3_init_early(void)
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	if (!of_have_populated_dt()) {
-		omap3_prcm_legacy_iomaps_init();
+		omap3_control_legacy_iomap_init();
 		if (soc_is_am35xx())
 			omap_clk_soc_init = am35xx_clk_legacy_init;
 		else if (cpu_is_omap3630())
@@ -546,8 +548,7 @@ void __init ti814x_init_early(void)
 {
 	omap2_set_globals_tap(TI814X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -565,8 +566,7 @@ void __init ti816x_init_early(void)
 {
 	omap2_set_globals_tap(TI816X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -586,8 +586,7 @@ void __init am33xx_init_early(void)
 {
 	omap2_set_globals_tap(AM335X_CLASS,
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
-	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -610,8 +609,7 @@ void __init am43xx_init_early(void)
 {
 	omap2_set_globals_tap(AM335X_CLASS,
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
-	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 6d0a808..6707333 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -21,7 +21,6 @@ extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
 int omap2_prm_base_init(void);
-void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
 /*
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index b23d232..a943e14 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -722,11 +722,6 @@ int __init omap_prcm_init(void)
 	return 0;
 }
 
-void __init omap3_prcm_legacy_iomaps_init(void)
-{
-	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
-}
-
 static int __init prm_late_init(void)
 {
 	if (prm_ll_data->late_init)
-- 
1.7.9.5

[PATCHv4 15/35] ARM: OMAP2+: control: determine control module base address from DT

[Tero Kristo]

There is no need to provide the control module base address through a
low-level API from the low-level IO init, as this information is
available through DT. This patch adds a new API to initialize the
control module though, but mostly makes the old API obsolete. The
old API can be completely removed once OMAP3 is made DT only.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c    |   48 +++++++++++++++++++++++++++++++++-----
 arch/arm/mach-omap2/control.h    |    2 ++
 arch/arm/mach-omap2/io.c         |   34 +++++++++++++--------------
 arch/arm/mach-omap2/prm.h        |    1 -
 arch/arm/mach-omap2/prm_common.c |    5 ----
 5 files changed, 60 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index e881824..074c333 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -616,6 +616,7 @@ void __init omap3_ctrl_init(void)
 
 struct control_init_data {
 	int index;
+	void __iomem *mem;
 };
 
 static struct control_init_data ctrl_data = {
@@ -631,6 +632,34 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 };
 
 /**
+ * omap2_control_base_init - initialize iomappings for the control driver
+ *
+ * Detects and initializes the iomappings for the control driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_control_base_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	struct control_init_data *data;
+	void __iomem *mem;
+
+	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+		data = (struct control_init_data *)match->data;
+
+		mem = of_iomap(np, 0);
+		if (!mem)
+			return -ENOMEM;
+
+		omap2_ctrl_base = mem;
+		data->mem = mem;
+	}
+
+	return 0;
+}
+
+/**
  * omap_control_init - low level init for the control driver
  *
  * Initializes the low level clock infrastructure for control driver.
@@ -639,7 +668,6 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 int __init omap_control_init(void)
 {
 	struct device_node *np;
-	void __iomem *mem;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -647,14 +675,22 @@ int __init omap_control_init(void)
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
-			return -ENOMEM;
-
-		ret = omap2_clk_provider_init(np, data->index, mem);
+		ret = omap2_clk_provider_init(np, data->index, data->mem);
 		if (ret)
 			return ret;
 	}
 
 	return 0;
 }
+
+/**
+ * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
+ *
+ * Legacy iomap init for clock provider. Needed only by legacy boot mode,
+ * where the base addresses are not parsed from DT, but still required
+ * by the clock driver to be setup properly.
+ */
+void __init omap3_control_legacy_iomap_init(void)
+{
+	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index baf5783..c1057eb 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -464,9 +464,11 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
+int omap2_control_base_init(void);
 int omap_control_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
+void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 712dd42..622ee3b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -384,8 +384,7 @@ void __init omap2420_init_early(void)
 	omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -412,8 +411,7 @@ void __init omap2430_init_early(void)
 	omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2xxx_prm_init();
 	omap2xxx_cm_init();
@@ -444,11 +442,15 @@ void __init omap3_init_early(void)
 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-				  NULL);
-	/* XXX: remove these two once OMAP3 is DT only */
-	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
-	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
+	/* XXX: remove these once OMAP3 is DT only */
+	if (!of_have_populated_dt()) {
+		omap2_set_globals_control(
+			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), NULL);
+		omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+		omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+				     NULL);
+	}
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
 	omap3xxx_prm_init();
@@ -459,7 +461,7 @@ void __init omap3_init_early(void)
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	if (!of_have_populated_dt()) {
-		omap3_prcm_legacy_iomaps_init();
+		omap3_control_legacy_iomap_init();
 		if (soc_is_am35xx())
 			omap_clk_soc_init = am35xx_clk_legacy_init;
 		else if (cpu_is_omap3630())
@@ -546,8 +548,7 @@ void __init ti814x_init_early(void)
 {
 	omap2_set_globals_tap(TI814X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -565,8 +566,7 @@ void __init ti816x_init_early(void)
 {
 	omap2_set_globals_tap(TI816X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_prm_init();
@@ -586,8 +586,7 @@ void __init am33xx_init_early(void)
 {
 	omap2_set_globals_tap(AM335X_CLASS,
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
-	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	am33xx_prm_init();
@@ -610,8 +609,7 @@ void __init am43xx_init_early(void)
 {
 	omap2_set_globals_tap(AM335X_CLASS,
 			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
-	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-				  NULL);
+	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap44xx_prm_init();
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 6d0a808..6707333 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -21,7 +21,6 @@ extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
 int omap2_prm_base_init(void);
-void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
 /*
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index b23d232..a943e14 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -722,11 +722,6 @@ int __init omap_prcm_init(void)
 	return 0;
 }
 
-void __init omap3_prcm_legacy_iomaps_init(void)
-{
-	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap_ctrl_base_get());
-}
-
 static int __init prm_late_init(void)
 {
 	if (prm_ll_data->late_init)
-- 
1.7.9.5

[PATCHv4 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

[Tero Kristo]

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to make PRM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c           |   21 ++++++++--------
 arch/arm/mach-omap2/prcm-common.h  |    4 +++
 arch/arm/mach-omap2/prm.h          |    1 +
 arch/arm/mach-omap2/prm2xxx.c      |    3 +--
 arch/arm/mach-omap2/prm2xxx.h      |    2 +-
 arch/arm/mach-omap2/prm33xx.c      |    3 +--
 arch/arm/mach-omap2/prm33xx.h      |    2 +-
 arch/arm/mach-omap2/prm3xxx.c      |    4 +--
 arch/arm/mach-omap2/prm3xxx.h      |    2 +-
 arch/arm/mach-omap2/prm44xx.c      |    3 +--
 arch/arm/mach-omap2/prm44xx.h      |    1 -
 arch/arm/mach-omap2/prm44xx_54xx.h |    4 ++-
 arch/arm/mach-omap2/prm54xx.h      |    1 -
 arch/arm/mach-omap2/prm7xx.h       |    2 +-
 arch/arm/mach-omap2/prm_common.c   |   47 +++++++++++++++++++++++++++---------
 15 files changed, 62 insertions(+), 38 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 622ee3b..7632dfe 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -386,7 +386,7 @@ void __init omap2420_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
 	omap2_control_base_init();
 	omap2xxx_check_revision();
-	omap2xxx_prm_init();
+	omap2_prcm_base_init();
 	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
@@ -413,7 +413,7 @@ void __init omap2430_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
 	omap2_control_base_init();
 	omap2xxx_check_revision();
-	omap2xxx_prm_init();
+	omap2_prcm_base_init();
 	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
@@ -453,7 +453,8 @@ void __init omap3_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
-	omap3xxx_prm_init();
+	omap2_prcm_base_init();
+	omap3xxx_prm_init(NULL);
 	omap3xxx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -551,7 +552,7 @@ void __init ti814x_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -569,7 +570,7 @@ void __init ti816x_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -589,7 +590,7 @@ void __init am33xx_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
@@ -612,7 +613,7 @@ void __init am43xx_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
@@ -638,7 +639,7 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
@@ -667,7 +668,7 @@ void __init omap5_init_early(void)
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap5xxx_check_revision();
 	omap4_cm_init();
 	omap54xx_voltagedomains_init();
@@ -694,7 +695,7 @@ void __init dra7xx_init_early(void)
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	dra7xxx_check_revision();
 	omap4_cm_init();
 	dra7xx_powerdomains_init();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 9e4dd0b..461bdc4 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,12 +524,16 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @init: low level PRCM init function for this module
+ * @np: device node for this PRCM module
  */
 struct omap_prcm_init_data {
 	int index;
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	int (*init)(const struct omap_prcm_init_data *data);
+	struct device_node *np;
 };
 
 extern void omap_prcm_irq_cleanup(void);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 6707333..3936e6c 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -21,6 +21,7 @@ extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
 int omap2_prm_base_init(void);
+int omap2_prcm_base_init(void);
 # endif
 
 /*
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index 29e203f..752018ce 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -220,9 +220,8 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
 };
 
-int __init omap2xxx_prm_init(void)
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	return prm_register(&omap2xxx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 9c91f4f..9008a9e 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,7 +124,7 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-extern int __init omap2xxx_prm_init(void);
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 1e052aa..dcb5001 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -378,9 +378,8 @@ static struct prm_ll_data am33xx_prm_ll_data = {
 	.reset_system			= am33xx_prm_global_warm_sw_reset,
 };
 
-int __init am33xx_prm_init(void)
+int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	return prm_register(&am33xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 98ac41f..2bc4ec5 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -118,7 +118,7 @@
 #define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
 
 #ifndef __ASSEMBLER__
-int am33xx_prm_init(void);
+int am33xx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index a347993..62680aa 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -670,12 +670,10 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.vp_clear_txdone = &omap3_prm_vp_clear_txdone,
 };
 
-int __init omap3xxx_prm_init(void)
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
 				       prm_base + OMAP3430_IVA2_MOD);
-	omap2_prm_base_init();
-
 	if (omap3_has_io_wakeup())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 55e4c89..5f095ee 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -140,7 +140,7 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern int __init omap3xxx_prm_init(void);
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index b479a33..e3f2d31 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -703,9 +703,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
-int __init omap44xx_prm_init(void)
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	omap_prm_base_init();
 
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7db2422..efd6035 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -26,7 +26,6 @@
 #define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
 
 #include "prm44xx_54xx.h"
-#include "prcm-common.h"
 #include "prm.h"
 
 #define OMAP4430_PRM_BASE		0x4a306000
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index a470185..3f139eb 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -23,6 +23,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
 
+#include "prcm-common.h"
+
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
@@ -34,7 +36,7 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern int __init omap44xx_prm_init(void);
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h
index e441101..1eb22ff 100644
--- a/arch/arm/mach-omap2/prm54xx.h
+++ b/arch/arm/mach-omap2/prm54xx.h
@@ -22,7 +22,6 @@
 #define __ARCH_ARM_MACH_OMAP2_PRM54XX_H
 
 #include "prm44xx_54xx.h"
-#include "prcm-common.h"
 #include "prm.h"
 
 #define OMAP54XX_PRM_BASE		0x4ae06000
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index 4bb50fbf..cc1e6a2 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -22,8 +22,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
 
-#include "prm44xx_54xx.h"
 #include "prcm-common.h"
+#include "prm44xx_54xx.h"
 #include "prm.h"
 
 #define DRA7XX_PRM_BASE		0x4ae06000
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a943e14..7c1ad89 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -32,6 +32,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
+#include "prm33xx.h"
 #include "prm44xx.h"
 #include "common.h"
 #include "clock.h"
@@ -633,12 +634,14 @@ int prm_unregister(struct prm_ll_data *pld)
 	return 0;
 }
 
-static struct omap_prcm_init_data prm_data = {
+static struct omap_prcm_init_data omap2_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
+	.init = omap2xxx_prm_init,
 };
 
-static struct omap_prcm_init_data omap3_prm_data = {
+static struct omap_prcm_init_data omap3_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
+	.init = omap3xxx_prm_init,
 
 	/*
 	 * IVA2 offset is a negative value, must offset the prm_base
@@ -647,22 +650,32 @@ static struct omap_prcm_init_data omap3_prm_data = {
 	.offset = -OMAP3430_IVA2_MOD,
 };
 
-static struct omap_prcm_init_data scrm_data = {
+static struct omap_prcm_init_data am3_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = am33xx_prm_init,
+};
+
+static struct omap_prcm_init_data omap4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+};
+
+static struct omap_prcm_init_data scrm_data __initdata = {
 	.index = TI_CLKM_SCRM,
 };
 
-static const struct of_device_id omap_prcm_dt_match_table[] = {
-	{ .compatible = "ti,am3-prcm", .data = &prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
-	{ .compatible = "ti,omap4-prm", .data = &prm_data },
+	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
 	{ }
 };
 
@@ -691,11 +704,21 @@ int __init omap2_prm_base_init(void)
 			prm_base = mem + data->offset;
 
 		data->mem = mem;
+
+		data->np = np;
+
+		if (data->init)
+			data->init(data);
 	}
 
 	return 0;
 }
 
+int __init omap2_prcm_base_init(void)
+{
+	return omap2_prm_base_init();
+}
+
 /**
  * omap_prcm_init - low level init for the PRCM drivers
  *
-- 
1.7.9.5

[PATCHv4 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API

[Tero Kristo]

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to make PRM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/io.c           |   21 ++++++++--------
 arch/arm/mach-omap2/prcm-common.h  |    4 +++
 arch/arm/mach-omap2/prm.h          |    1 +
 arch/arm/mach-omap2/prm2xxx.c      |    3 +--
 arch/arm/mach-omap2/prm2xxx.h      |    2 +-
 arch/arm/mach-omap2/prm33xx.c      |    3 +--
 arch/arm/mach-omap2/prm33xx.h      |    2 +-
 arch/arm/mach-omap2/prm3xxx.c      |    4 +--
 arch/arm/mach-omap2/prm3xxx.h      |    2 +-
 arch/arm/mach-omap2/prm44xx.c      |    3 +--
 arch/arm/mach-omap2/prm44xx.h      |    1 -
 arch/arm/mach-omap2/prm44xx_54xx.h |    4 ++-
 arch/arm/mach-omap2/prm54xx.h      |    1 -
 arch/arm/mach-omap2/prm7xx.h       |    2 +-
 arch/arm/mach-omap2/prm_common.c   |   47 +++++++++++++++++++++++++++---------
 15 files changed, 62 insertions(+), 38 deletions(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 622ee3b..7632dfe 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -386,7 +386,7 @@ void __init omap2420_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
 	omap2_control_base_init();
 	omap2xxx_check_revision();
-	omap2xxx_prm_init();
+	omap2_prcm_base_init();
 	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
@@ -413,7 +413,7 @@ void __init omap2430_init_early(void)
 			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
 	omap2_control_base_init();
 	omap2xxx_check_revision();
-	omap2xxx_prm_init();
+	omap2_prcm_base_init();
 	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
@@ -453,7 +453,8 @@ void __init omap3_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
-	omap3xxx_prm_init();
+	omap2_prcm_base_init();
+	omap3xxx_prm_init(NULL);
 	omap3xxx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -551,7 +552,7 @@ void __init ti814x_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -569,7 +570,7 @@ void __init ti816x_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	ti81xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -589,7 +590,7 @@ void __init am33xx_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
-	am33xx_prm_init();
+	omap2_prcm_base_init();
 	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
@@ -612,7 +613,7 @@ void __init am43xx_init_early(void)
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
@@ -638,7 +639,7 @@ void __init omap4430_init_early(void)
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
@@ -667,7 +668,7 @@ void __init omap5_init_early(void)
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	omap5xxx_check_revision();
 	omap4_cm_init();
 	omap54xx_voltagedomains_init();
@@ -694,7 +695,7 @@ void __init dra7xx_init_early(void)
 				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
-	omap44xx_prm_init();
+	omap2_prcm_base_init();
 	dra7xxx_check_revision();
 	omap4_cm_init();
 	dra7xx_powerdomains_init();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 9e4dd0b..461bdc4 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,12 +524,16 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @init: low level PRCM init function for this module
+ * @np: device node for this PRCM module
  */
 struct omap_prcm_init_data {
 	int index;
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	int (*init)(const struct omap_prcm_init_data *data);
+	struct device_node *np;
 };
 
 extern void omap_prcm_irq_cleanup(void);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 6707333..3936e6c 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -21,6 +21,7 @@ extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
 int omap2_prm_base_init(void);
+int omap2_prcm_base_init(void);
 # endif
 
 /*
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index 29e203f..752018ce 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -220,9 +220,8 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
 };
 
-int __init omap2xxx_prm_init(void)
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	return prm_register(&omap2xxx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 9c91f4f..9008a9e 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,7 +124,7 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-extern int __init omap2xxx_prm_init(void);
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 1e052aa..dcb5001 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -378,9 +378,8 @@ static struct prm_ll_data am33xx_prm_ll_data = {
 	.reset_system			= am33xx_prm_global_warm_sw_reset,
 };
 
-int __init am33xx_prm_init(void)
+int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	return prm_register(&am33xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 98ac41f..2bc4ec5 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -118,7 +118,7 @@
 #define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
 
 #ifndef __ASSEMBLER__
-int am33xx_prm_init(void);
+int am33xx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index a347993..62680aa 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -670,12 +670,10 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.vp_clear_txdone = &omap3_prm_vp_clear_txdone,
 };
 
-int __init omap3xxx_prm_init(void)
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap2_clk_legacy_provider_init(TI_CLKM_PRM,
 				       prm_base + OMAP3430_IVA2_MOD);
-	omap2_prm_base_init();
-
 	if (omap3_has_io_wakeup())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 55e4c89..5f095ee 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -140,7 +140,7 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern int __init omap3xxx_prm_init(void);
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index b479a33..e3f2d31 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -703,9 +703,8 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
-int __init omap44xx_prm_init(void)
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_prm_base_init();
 	omap_prm_base_init();
 
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7db2422..efd6035 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -26,7 +26,6 @@
 #define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
 
 #include "prm44xx_54xx.h"
-#include "prcm-common.h"
 #include "prm.h"
 
 #define OMAP4430_PRM_BASE		0x4a306000
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index a470185..3f139eb 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -23,6 +23,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
 
+#include "prcm-common.h"
+
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
@@ -34,7 +36,7 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern int __init omap44xx_prm_init(void);
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h
index e441101..1eb22ff 100644
--- a/arch/arm/mach-omap2/prm54xx.h
+++ b/arch/arm/mach-omap2/prm54xx.h
@@ -22,7 +22,6 @@
 #define __ARCH_ARM_MACH_OMAP2_PRM54XX_H
 
 #include "prm44xx_54xx.h"
-#include "prcm-common.h"
 #include "prm.h"
 
 #define OMAP54XX_PRM_BASE		0x4ae06000
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index 4bb50fbf..cc1e6a2 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -22,8 +22,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
 
-#include "prm44xx_54xx.h"
 #include "prcm-common.h"
+#include "prm44xx_54xx.h"
 #include "prm.h"
 
 #define DRA7XX_PRM_BASE		0x4ae06000
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a943e14..7c1ad89 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -32,6 +32,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
+#include "prm33xx.h"
 #include "prm44xx.h"
 #include "common.h"
 #include "clock.h"
@@ -633,12 +634,14 @@ int prm_unregister(struct prm_ll_data *pld)
 	return 0;
 }
 
-static struct omap_prcm_init_data prm_data = {
+static struct omap_prcm_init_data omap2_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
+	.init = omap2xxx_prm_init,
 };
 
-static struct omap_prcm_init_data omap3_prm_data = {
+static struct omap_prcm_init_data omap3_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
+	.init = omap3xxx_prm_init,
 
 	/*
 	 * IVA2 offset is a negative value, must offset the prm_base
@@ -647,22 +650,32 @@ static struct omap_prcm_init_data omap3_prm_data = {
 	.offset = -OMAP3430_IVA2_MOD,
 };
 
-static struct omap_prcm_init_data scrm_data = {
+static struct omap_prcm_init_data am3_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = am33xx_prm_init,
+};
+
+static struct omap_prcm_init_data omap4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+};
+
+static struct omap_prcm_init_data scrm_data __initdata = {
 	.index = TI_CLKM_SCRM,
 };
 
-static const struct of_device_id omap_prcm_dt_match_table[] = {
-	{ .compatible = "ti,am3-prcm", .data = &prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm814-prcm", .data = &prm_data },
-	{ .compatible = "ti,dm816-prcm", .data = &prm_data },
-	{ .compatible = "ti,omap2-prcm", .data = &prm_data },
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
-	{ .compatible = "ti,omap4-prm", .data = &prm_data },
+	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
 	{ }
 };
 
@@ -691,11 +704,21 @@ int __init omap2_prm_base_init(void)
 			prm_base = mem + data->offset;
 
 		data->mem = mem;
+
+		data->np = np;
+
+		if (data->init)
+			data->init(data);
 	}
 
 	return 0;
 }
 
+int __init omap2_prcm_base_init(void)
+{
+	return omap2_prm_base_init();
+}
+
 /**
  * omap_prcm_init - low level init for the PRCM drivers
  *
-- 
1.7.9.5

[PATCHv4 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility

[Tero Kristo]

PRM device instance offset is now provided through the prm_init_data.
This gets rid of some cpu_is_X / soc_is_X calls from PRM core code,
preparing for PRM to be its own separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    2 ++
 arch/arm/mach-omap2/prm44xx.c     |    2 ++
 arch/arm/mach-omap2/prm_common.c  |   28 +++++++++++++++++++++++++---
 arch/arm/mach-omap2/prminst44xx.c |   18 +++++-------------
 arch/arm/mach-omap2/prminst44xx.h |    1 +
 5 files changed, 35 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 461bdc4..6ae0b3a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
  * @init: low level PRCM init function for this module
  * @np: device node for this PRCM module
  */
@@ -532,6 +533,7 @@ struct omap_prcm_init_data {
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	s32 device_inst_offset;
 	int (*init)(const struct omap_prcm_init_data *data);
 	struct device_node *np;
 };
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index e3f2d31..a980d245 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	if (!soc_is_dra7xx())
 		prm_features |= PRM_HAS_VOLTAGE;
 
+	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7c1ad89..bfefbcb 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -34,6 +34,9 @@
 #include "prm3xxx.h"
 #include "prm33xx.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
 #include "common.h"
 #include "clock.h"
 #include "cm.h"
@@ -658,6 +661,25 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = AM43XX_PRM_DEVICE_INST,
 };
 
 static struct omap_prcm_init_data scrm_data __initdata = {
@@ -666,16 +688,16 @@ static struct omap_prcm_init_data scrm_data __initdata = {
 
 static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1..c4859c4 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@ void omap_prm_base_init(void)
 
 s32 omap4_prmst_get_prm_dev_inst(void)
 {
-	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
-		return prm_dev_inst;
-
-	/* This cannot be done way early at boot.. as things are not setup */
-	if (cpu_is_omap44xx())
-		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
 	return prm_dev_inst;
 }
 
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+	prm_dev_inst = dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index fb1c9d7..0c03d07 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -14,6 +14,7 @@
 
 #define PRM_INSTANCE_UNKNOWN	-1
 extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
 
 /*
  * In an ideal world, we would not export these low-level functions,
-- 
1.7.9.5

[PATCHv4 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility

[Tero Kristo]

PRM device instance offset is now provided through the prm_init_data.
This gets rid of some cpu_is_X / soc_is_X calls from PRM core code,
preparing for PRM to be its own separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    2 ++
 arch/arm/mach-omap2/prm44xx.c     |    2 ++
 arch/arm/mach-omap2/prm_common.c  |   28 +++++++++++++++++++++++++---
 arch/arm/mach-omap2/prminst44xx.c |   18 +++++-------------
 arch/arm/mach-omap2/prminst44xx.h |    1 +
 5 files changed, 35 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 461bdc4..6ae0b3a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
  * @init: low level PRCM init function for this module
  * @np: device node for this PRCM module
  */
@@ -532,6 +533,7 @@ struct omap_prcm_init_data {
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	s32 device_inst_offset;
 	int (*init)(const struct omap_prcm_init_data *data);
 	struct device_node *np;
 };
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index e3f2d31..a980d245 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	if (!soc_is_dra7xx())
 		prm_features |= PRM_HAS_VOLTAGE;
 
+	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7c1ad89..bfefbcb 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -34,6 +34,9 @@
 #include "prm3xxx.h"
 #include "prm33xx.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
 #include "common.h"
 #include "clock.h"
 #include "cm.h"
@@ -658,6 +661,25 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = AM43XX_PRM_DEVICE_INST,
 };
 
 static struct omap_prcm_init_data scrm_data __initdata = {
@@ -666,16 +688,16 @@ static struct omap_prcm_init_data scrm_data __initdata = {
 
 static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1..c4859c4 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@ void omap_prm_base_init(void)
 
 s32 omap4_prmst_get_prm_dev_inst(void)
 {
-	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
-		return prm_dev_inst;
-
-	/* This cannot be done way early at boot.. as things are not setup */
-	if (cpu_is_omap44xx())
-		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
 	return prm_dev_inst;
 }
 
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+	prm_dev_inst = dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index fb1c9d7..0c03d07 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -14,6 +14,7 @@
 
 #define PRM_INSTANCE_UNKNOWN	-1
 extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
 
 /*
  * In an ideal world, we would not export these low-level functions,
-- 
1.7.9.5

[PATCHv4 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API

[Tero Kristo]

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the CM driver. Done in preparation to make CM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm2xxx.c     |    3 +--
 arch/arm/mach-omap2/cm2xxx.h     |    2 +-
 arch/arm/mach-omap2/cm33xx.c     |    3 +--
 arch/arm/mach-omap2/cm33xx.h     |    3 ++-
 arch/arm/mach-omap2/cm3xxx.c     |    3 +--
 arch/arm/mach-omap2/cm3xxx.h     |    2 +-
 arch/arm/mach-omap2/cm44xx.h     |    2 +-
 arch/arm/mach-omap2/cm_common.c  |   35 +++++++++++++++++++++++++----------
 arch/arm/mach-omap2/cminst44xx.c |    3 +--
 arch/arm/mach-omap2/io.c         |   16 +++++-----------
 arch/arm/mach-omap2/prm_common.c |    8 +++++++-
 11 files changed, 46 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index f18c844..3e5fd35 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -393,9 +393,8 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 	.wait_module_ready	= &omap2xxx_cm_wait_module_ready,
 };
 
-int __init omap2xxx_cm_init(void)
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 83b6c59..7b8c79c 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -63,7 +63,7 @@ extern u32 omap2xxx_cm_get_core_pll_config(void);
 extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
 					 u32 mdm);
 
-extern int __init omap2xxx_cm_init(void);
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 221bca3..7b181f9 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -352,9 +352,8 @@ static struct cm_ll_data am33xx_cm_ll_data = {
 	.module_disable		= &am33xx_cm_module_disable,
 };
 
-int __init am33xx_cm_init(void)
+int __init am33xx_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	return cm_register(&am33xx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 046b4b2..a91f7d2 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -19,6 +19,7 @@
 
 #include "cm.h"
 #include "cm-regbits-33xx.h"
+#include "prcm-common.h"
 
 /* CM base address */
 #define AM33XX_CM_BASE		0x44e00000
@@ -374,6 +375,6 @@
 
 
 #ifndef __ASSEMBLER__
-int am33xx_cm_init(void);
+int am33xx_cm_init(const struct omap_prcm_init_data *data);
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 88e6cb6..187fa43 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -671,10 +671,9 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 	.wait_module_ready	= &omap3xxx_cm_wait_module_ready,
 };
 
-int __init omap3xxx_cm_init(void)
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data)
 {
 	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
-	omap2_cm_base_init();
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index 734a858..bc444e2 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -72,7 +72,7 @@ extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
 extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
 
-extern int __init omap3xxx_cm_init(void);
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index ad6e263..309a4c9 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,6 +23,6 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
-int omap4_cm_init(void);
+int omap4_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 32af8fc..0845194 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -20,6 +20,7 @@
 
 #include "cm2xxx.h"
 #include "cm3xxx.h"
+#include "cm33xx.h"
 #include "cm44xx.h"
 #include "clock.h"
 
@@ -37,6 +38,7 @@ void __iomem *cm_base;
 void __iomem *cm2_base;
 
 #define CM_NO_CLOCKS		0x1
+#define CM_SINGLE_INSTANCE	0x2
 
 /**
  * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
@@ -218,21 +220,26 @@ int cm_unregister(struct cm_ll_data *cld)
 	return 0;
 }
 
-static struct omap_prcm_init_data cm_data = {
+static struct omap_prcm_init_data cm_data __initdata = {
 	.index = TI_CLKM_CM,
+	.init = omap4_cm_init,
 };
 
-static struct omap_prcm_init_data cm2_data = {
+static struct omap_prcm_init_data cm2_data __initdata = {
 	.index = TI_CLKM_CM2,
+	.init = omap4_cm_init,
 };
 
-static struct omap_prcm_init_data omap2_prcm_data = {
+static struct omap_prcm_init_data omap2_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.init = omap2xxx_cm_init,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
 };
 
-static struct omap_prcm_init_data omap3_cm_data = {
+static struct omap_prcm_init_data omap3_cm_data __initdata = {
 	.index = TI_CLKM_CM,
+	.init = omap3xxx_cm_init,
+	.flags = CM_SINGLE_INSTANCE,
 
 	/*
 	 * IVA2 offset is a negative value, must offset the cm_base address
@@ -241,17 +248,19 @@ static struct omap_prcm_init_data omap3_cm_data = {
 	.offset = -OMAP3430_IVA2_MOD,
 };
 
-static struct omap_prcm_init_data am3_prcm_data = {
+static struct omap_prcm_init_data am3_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+	.init = am33xx_cm_init,
 };
 
-static struct omap_prcm_init_data am4_prcm_data = {
+static struct omap_prcm_init_data am4_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+	.init = omap4_cm_init,
 };
 
-static const struct of_device_id omap_cm_dt_match_table[] = {
+static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
 	{ .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
 	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
@@ -293,6 +302,12 @@ int __init omap2_cm_base_init(void)
 			cm2_base = mem + data->offset;
 
 		data->mem = mem;
+
+		data->np = np;
+
+		if (data->init && (data->flags & CM_SINGLE_INSTANCE ||
+				   (cm_base && cm2_base)))
+			data->init(data);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 4aed22d..2c0e07e 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -514,9 +514,8 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 	.module_disable		= &omap4_cminst_module_disable,
 };
 
-int __init omap4_cm_init(void)
+int __init omap4_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	omap_cm_base_init();
 
 	return cm_register(&omap4xxx_cm_ll_data);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7632dfe..c3fa739 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -387,7 +387,6 @@ void __init omap2420_init_early(void)
 	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2_prcm_base_init();
-	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
 	omap242x_clockdomains_init();
@@ -414,7 +413,6 @@ void __init omap2430_init_early(void)
 	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2_prcm_base_init();
-	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
 	omap243x_clockdomains_init();
@@ -454,8 +452,11 @@ void __init omap3_init_early(void)
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
 	omap2_prcm_base_init();
-	omap3xxx_prm_init(NULL);
-	omap3xxx_cm_init();
+	/* XXX: remove these once OMAP3 is DT only */
+	if (!of_have_populated_dt()) {
+		omap3xxx_prm_init(NULL);
+		omap3xxx_cm_init(NULL);
+	}
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
@@ -553,7 +554,6 @@ void __init ti814x_init_early(void)
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	ti81xx_clockdomains_init();
@@ -571,7 +571,6 @@ void __init ti816x_init_early(void)
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	ti81xx_clockdomains_init();
@@ -591,7 +590,6 @@ void __init am33xx_init_early(void)
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
@@ -614,7 +612,6 @@ void __init am43xx_init_early(void)
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap2_prcm_base_init();
-	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
@@ -640,7 +637,6 @@ void __init omap4430_init_early(void)
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
-	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
@@ -670,7 +666,6 @@ void __init omap5_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
-	omap4_cm_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
@@ -697,7 +692,6 @@ void __init dra7xx_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	dra7xxx_check_revision();
-	omap4_cm_init();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index bfefbcb..9850828 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -738,7 +738,13 @@ int __init omap2_prm_base_init(void)
 
 int __init omap2_prcm_base_init(void)
 {
-	return omap2_prm_base_init();
+	int ret;
+
+	ret = omap2_prm_base_init();
+	if (ret)
+		return ret;
+
+	return omap2_cm_base_init();
 }
 
 /**
-- 
1.7.9.5

[PATCHv4 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API

[Tero Kristo]

This gets rid of need for some exported driver APIs, and simplifies the
initialization of the CM driver. Done in preparation to make CM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/cm2xxx.c     |    3 +--
 arch/arm/mach-omap2/cm2xxx.h     |    2 +-
 arch/arm/mach-omap2/cm33xx.c     |    3 +--
 arch/arm/mach-omap2/cm33xx.h     |    3 ++-
 arch/arm/mach-omap2/cm3xxx.c     |    3 +--
 arch/arm/mach-omap2/cm3xxx.h     |    2 +-
 arch/arm/mach-omap2/cm44xx.h     |    2 +-
 arch/arm/mach-omap2/cm_common.c  |   35 +++++++++++++++++++++++++----------
 arch/arm/mach-omap2/cminst44xx.c |    3 +--
 arch/arm/mach-omap2/io.c         |   16 +++++-----------
 arch/arm/mach-omap2/prm_common.c |    8 +++++++-
 11 files changed, 46 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index f18c844..3e5fd35 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -393,9 +393,8 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 	.wait_module_ready	= &omap2xxx_cm_wait_module_ready,
 };
 
-int __init omap2xxx_cm_init(void)
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 83b6c59..7b8c79c 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -63,7 +63,7 @@ extern u32 omap2xxx_cm_get_core_pll_config(void);
 extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
 					 u32 mdm);
 
-extern int __init omap2xxx_cm_init(void);
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 221bca3..7b181f9 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -352,9 +352,8 @@ static struct cm_ll_data am33xx_cm_ll_data = {
 	.module_disable		= &am33xx_cm_module_disable,
 };
 
-int __init am33xx_cm_init(void)
+int __init am33xx_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	return cm_register(&am33xx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 046b4b2..a91f7d2 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -19,6 +19,7 @@
 
 #include "cm.h"
 #include "cm-regbits-33xx.h"
+#include "prcm-common.h"
 
 /* CM base address */
 #define AM33XX_CM_BASE		0x44e00000
@@ -374,6 +375,6 @@
 
 
 #ifndef __ASSEMBLER__
-int am33xx_cm_init(void);
+int am33xx_cm_init(const struct omap_prcm_init_data *data);
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 88e6cb6..187fa43 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -671,10 +671,9 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 	.wait_module_ready	= &omap3xxx_cm_wait_module_ready,
 };
 
-int __init omap3xxx_cm_init(void)
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data)
 {
 	omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
-	omap2_cm_base_init();
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index 734a858..bc444e2 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -72,7 +72,7 @@ extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
 extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
 
-extern int __init omap3xxx_cm_init(void);
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index ad6e263..309a4c9 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,6 +23,6 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
-int omap4_cm_init(void);
+int omap4_cm_init(const struct omap_prcm_init_data *data);
 
 #endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 32af8fc..0845194 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -20,6 +20,7 @@
 
 #include "cm2xxx.h"
 #include "cm3xxx.h"
+#include "cm33xx.h"
 #include "cm44xx.h"
 #include "clock.h"
 
@@ -37,6 +38,7 @@ void __iomem *cm_base;
 void __iomem *cm2_base;
 
 #define CM_NO_CLOCKS		0x1
+#define CM_SINGLE_INSTANCE	0x2
 
 /**
  * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
@@ -218,21 +220,26 @@ int cm_unregister(struct cm_ll_data *cld)
 	return 0;
 }
 
-static struct omap_prcm_init_data cm_data = {
+static struct omap_prcm_init_data cm_data __initdata = {
 	.index = TI_CLKM_CM,
+	.init = omap4_cm_init,
 };
 
-static struct omap_prcm_init_data cm2_data = {
+static struct omap_prcm_init_data cm2_data __initdata = {
 	.index = TI_CLKM_CM2,
+	.init = omap4_cm_init,
 };
 
-static struct omap_prcm_init_data omap2_prcm_data = {
+static struct omap_prcm_init_data omap2_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.init = omap2xxx_cm_init,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
 };
 
-static struct omap_prcm_init_data omap3_cm_data = {
+static struct omap_prcm_init_data omap3_cm_data __initdata = {
 	.index = TI_CLKM_CM,
+	.init = omap3xxx_cm_init,
+	.flags = CM_SINGLE_INSTANCE,
 
 	/*
 	 * IVA2 offset is a negative value, must offset the cm_base address
@@ -241,17 +248,19 @@ static struct omap_prcm_init_data omap3_cm_data = {
 	.offset = -OMAP3430_IVA2_MOD,
 };
 
-static struct omap_prcm_init_data am3_prcm_data = {
+static struct omap_prcm_init_data am3_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+	.init = am33xx_cm_init,
 };
 
-static struct omap_prcm_init_data am4_prcm_data = {
+static struct omap_prcm_init_data am4_prcm_data __initdata = {
 	.index = TI_CLKM_CM,
-	.flags = CM_NO_CLOCKS,
+	.flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+	.init = omap4_cm_init,
 };
 
-static const struct of_device_id omap_cm_dt_match_table[] = {
+static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
 	{ .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
 	{ .compatible = "ti,omap4-cm1", .data = &cm_data },
@@ -293,6 +302,12 @@ int __init omap2_cm_base_init(void)
 			cm2_base = mem + data->offset;
 
 		data->mem = mem;
+
+		data->np = np;
+
+		if (data->init && (data->flags & CM_SINGLE_INSTANCE ||
+				   (cm_base && cm2_base)))
+			data->init(data);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 4aed22d..2c0e07e 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -514,9 +514,8 @@ static struct cm_ll_data omap4xxx_cm_ll_data = {
 	.module_disable		= &omap4_cminst_module_disable,
 };
 
-int __init omap4_cm_init(void)
+int __init omap4_cm_init(const struct omap_prcm_init_data *data)
 {
-	omap2_cm_base_init();
 	omap_cm_base_init();
 
 	return cm_register(&omap4xxx_cm_ll_data);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7632dfe..c3fa739 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -387,7 +387,6 @@ void __init omap2420_init_early(void)
 	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2_prcm_base_init();
-	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
 	omap242x_clockdomains_init();
@@ -414,7 +413,6 @@ void __init omap2430_init_early(void)
 	omap2_control_base_init();
 	omap2xxx_check_revision();
 	omap2_prcm_base_init();
-	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
 	omap243x_clockdomains_init();
@@ -454,8 +452,11 @@ void __init omap3_init_early(void)
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
 	omap2_prcm_base_init();
-	omap3xxx_prm_init(NULL);
-	omap3xxx_cm_init();
+	/* XXX: remove these once OMAP3 is DT only */
+	if (!of_have_populated_dt()) {
+		omap3xxx_prm_init(NULL);
+		omap3xxx_cm_init(NULL);
+	}
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
@@ -553,7 +554,6 @@ void __init ti814x_init_early(void)
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	ti81xx_clockdomains_init();
@@ -571,7 +571,6 @@ void __init ti816x_init_early(void)
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	ti81xx_clockdomains_init();
@@ -591,7 +590,6 @@ void __init am33xx_init_early(void)
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap2_prcm_base_init();
-	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
@@ -614,7 +612,6 @@ void __init am43xx_init_early(void)
 	omap3xxx_check_revision();
 	am33xx_check_features();
 	omap2_prcm_base_init();
-	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
@@ -640,7 +637,6 @@ void __init omap4430_init_early(void)
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
-	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
@@ -670,7 +666,6 @@ void __init omap5_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
-	omap4_cm_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
@@ -697,7 +692,6 @@ void __init dra7xx_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	dra7xxx_check_revision();
-	omap4_cm_init();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index bfefbcb..9850828 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -738,7 +738,13 @@ int __init omap2_prm_base_init(void)
 
 int __init omap2_prcm_base_init(void)
 {
-	return omap2_prm_base_init();
+	int ret;
+
+	ret = omap2_prm_base_init();
+	if (ret)
+		return ret;
+
+	return omap2_cm_base_init();
 }
 
 /**
-- 
1.7.9.5

[PATCHv4 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags

[Tero Kristo]

Currently some cpu_is_X checks are used to setup prm_features, however
the same can be accomplished by just passing these flags from the PRM
init data. This is done in preparation to make PRM a separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm44xx.c    |    4 ++--
 arch/arm/mach-omap2/prm_common.c |    3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a980d245..243133c 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -707,10 +707,10 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap_prm_base_init();
 
-	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
+	if (data->flags & PRM_HAS_IO_WAKEUP)
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
-	if (!soc_is_dra7xx())
+	if (data->flags & PRM_HAS_VOLTAGE)
 		prm_features |= PRM_HAS_VOLTAGE;
 
 	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 9850828..d964e41 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -662,18 +662,21 @@ static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
 };
 
 static struct omap_prcm_init_data omap5_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
 };
 
 static struct omap_prcm_init_data dra7_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP,
 };
 
 static struct omap_prcm_init_data am4_prm_data __initdata = {
-- 
1.7.9.5

[PATCHv4 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags

[Tero Kristo]

Currently some cpu_is_X checks are used to setup prm_features, however
the same can be accomplished by just passing these flags from the PRM
init data. This is done in preparation to make PRM a separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm44xx.c    |    4 ++--
 arch/arm/mach-omap2/prm_common.c |    3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a980d245..243133c 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -707,10 +707,10 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap_prm_base_init();
 
-	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
+	if (data->flags & PRM_HAS_IO_WAKEUP)
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
-	if (!soc_is_dra7xx())
+	if (data->flags & PRM_HAS_VOLTAGE)
 		prm_features |= PRM_HAS_VOLTAGE;
 
 	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 9850828..d964e41 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -662,18 +662,21 @@ static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
 };
 
 static struct omap_prcm_init_data omap5_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
 };
 
 static struct omap_prcm_init_data dra7_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP,
 };
 
 static struct omap_prcm_init_data am4_prm_data __initdata = {
-- 
1.7.9.5

[PATCHv4 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init

[Tero Kristo]

The compatible DT node is now passed with the prm init, so there is no
need to do node matching here again. Added a new flag to the init data
also, to detect default IRQ support for OMAP4. Also, any booting omap4
DT setup always has a PRM node, so there is no need to check against
the special case where it would be missing.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm.h        |    2 ++
 arch/arm/mach-omap2/prm44xx.c    |   54 +++++++++++++++-----------------------
 arch/arm/mach-omap2/prm_common.c |    2 +-
 3 files changed, 24 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 3936e6c..6312cc3 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -29,9 +29,11 @@ int omap2_prcm_base_init(void);
  *
  * PRM_HAS_IO_WAKEUP: has IO wakeup capability
  * PRM_HAS_VOLTAGE: has voltage domains
+ * PRM_IRQ_DEFAULT: use default irq number for PRM irq
  */
 #define PRM_HAS_IO_WAKEUP	(1 << 0)
 #define PRM_HAS_VOLTAGE		(1 << 1)
+#define PRM_IRQ_DEFAULT		BIT(2)
 
 /*
  * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 243133c..c35ad0b 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -703,10 +703,14 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
+static const struct omap_prcm_init_data *prm_init_data;
+
 int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap_prm_base_init();
 
+	prm_init_data = data;
+
 	if (data->flags & PRM_HAS_IO_WAKEUP)
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
@@ -718,16 +722,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
-static const struct of_device_id omap_prm_dt_match_table[] = {
-	{ .compatible = "ti,omap4-prm" },
-	{ .compatible = "ti,omap5-prm" },
-	{ .compatible = "ti,dra7-prm" },
-	{ }
-};
-
 static int omap44xx_prm_late_init(void)
 {
-	struct device_node *np;
 	int irq_num;
 
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
@@ -737,31 +733,23 @@ static int omap44xx_prm_late_init(void)
 	if (!of_have_populated_dt())
 		return 0;
 
-	np = of_find_matching_node(NULL, omap_prm_dt_match_table);
-
-	if (!np) {
-		/* Default loaded up with OMAP4 values */
-		if (!cpu_is_omap44xx())
-			return 0;
-	} else {
-		irq_num = of_irq_get(np, 0);
-		/*
-		 * Already have OMAP4 IRQ num. For all other platforms, we need
-		 * IRQ numbers from DT
-		 */
-		if (irq_num < 0 && !cpu_is_omap44xx()) {
-			if (irq_num == -EPROBE_DEFER)
-				return irq_num;
-
-			/* Have nothing to do */
-			return 0;
-		}
-
-		/* Once OMAP4 DT is filled as well */
-		if (irq_num >= 0) {
-			omap4_prcm_irq_setup.irq = irq_num;
-			omap4_prcm_irq_setup.xlate_irq = NULL;
-		}
+	irq_num = of_irq_get(prm_init_data->np, 0);
+	/*
+	 * Already have OMAP4 IRQ num. For all other platforms, we need
+	 * IRQ numbers from DT
+	 */
+	if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+		if (irq_num == -EPROBE_DEFER)
+			return irq_num;
+
+		/* Have nothing to do */
+		return 0;
+	}
+
+	/* Once OMAP4 DT is filled as well */
+	if (irq_num >= 0) {
+		omap4_prcm_irq_setup.irq = irq_num;
+		omap4_prcm_irq_setup.xlate_irq = NULL;
 	}
 
 	omap44xx_prm_enable_io_wakeup();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index d964e41..44221fe 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -662,7 +662,7 @@ static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
-	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
 };
 
 static struct omap_prcm_init_data omap5_prm_data __initdata = {
-- 
1.7.9.5

[PATCHv4 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init

[Tero Kristo]

The compatible DT node is now passed with the prm init, so there is no
need to do node matching here again. Added a new flag to the init data
also, to detect default IRQ support for OMAP4. Also, any booting omap4
DT setup always has a PRM node, so there is no need to check against
the special case where it would be missing.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prm.h        |    2 ++
 arch/arm/mach-omap2/prm44xx.c    |   54 +++++++++++++++-----------------------
 arch/arm/mach-omap2/prm_common.c |    2 +-
 3 files changed, 24 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 3936e6c..6312cc3 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -29,9 +29,11 @@ int omap2_prcm_base_init(void);
  *
  * PRM_HAS_IO_WAKEUP: has IO wakeup capability
  * PRM_HAS_VOLTAGE: has voltage domains
+ * PRM_IRQ_DEFAULT: use default irq number for PRM irq
  */
 #define PRM_HAS_IO_WAKEUP	(1 << 0)
 #define PRM_HAS_VOLTAGE		(1 << 1)
+#define PRM_IRQ_DEFAULT		BIT(2)
 
 /*
  * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 243133c..c35ad0b 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -703,10 +703,14 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.vp_clear_txdone	= omap4_prm_vp_clear_txdone,
 };
 
+static const struct omap_prcm_init_data *prm_init_data;
+
 int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 {
 	omap_prm_base_init();
 
+	prm_init_data = data;
+
 	if (data->flags & PRM_HAS_IO_WAKEUP)
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
@@ -718,16 +722,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
-static const struct of_device_id omap_prm_dt_match_table[] = {
-	{ .compatible = "ti,omap4-prm" },
-	{ .compatible = "ti,omap5-prm" },
-	{ .compatible = "ti,dra7-prm" },
-	{ }
-};
-
 static int omap44xx_prm_late_init(void)
 {
-	struct device_node *np;
 	int irq_num;
 
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
@@ -737,31 +733,23 @@ static int omap44xx_prm_late_init(void)
 	if (!of_have_populated_dt())
 		return 0;
 
-	np = of_find_matching_node(NULL, omap_prm_dt_match_table);
-
-	if (!np) {
-		/* Default loaded up with OMAP4 values */
-		if (!cpu_is_omap44xx())
-			return 0;
-	} else {
-		irq_num = of_irq_get(np, 0);
-		/*
-		 * Already have OMAP4 IRQ num. For all other platforms, we need
-		 * IRQ numbers from DT
-		 */
-		if (irq_num < 0 && !cpu_is_omap44xx()) {
-			if (irq_num == -EPROBE_DEFER)
-				return irq_num;
-
-			/* Have nothing to do */
-			return 0;
-		}
-
-		/* Once OMAP4 DT is filled as well */
-		if (irq_num >= 0) {
-			omap4_prcm_irq_setup.irq = irq_num;
-			omap4_prcm_irq_setup.xlate_irq = NULL;
-		}
+	irq_num = of_irq_get(prm_init_data->np, 0);
+	/*
+	 * Already have OMAP4 IRQ num. For all other platforms, we need
+	 * IRQ numbers from DT
+	 */
+	if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+		if (irq_num == -EPROBE_DEFER)
+			return irq_num;
+
+		/* Have nothing to do */
+		return 0;
+	}
+
+	/* Once OMAP4 DT is filled as well */
+	if (irq_num >= 0) {
+		omap4_prcm_irq_setup.irq = irq_num;
+		omap4_prcm_irq_setup.xlate_irq = NULL;
 	}
 
 	omap44xx_prm_enable_io_wakeup();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index d964e41..44221fe 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -662,7 +662,7 @@ static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
-	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
+	.flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
 };
 
 static struct omap_prcm_init_data omap5_prm_data __initdata = {
-- 
1.7.9.5

[PATCHv4 21/35] ARM: OMAP2+: clock: add low-level support for regmap

[Tero Kristo]

Some of the TI clock providers will be converted to use syscon, thus
low-level regmap support is needed for the clock drivers also. This
patch adds this support, which can be enabled for individual drivers
in later patches.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c      |   39 ++++++++++++++++++++++++++++++++------
 arch/arm/mach-omap2/clock.h      |    4 +++-
 arch/arm/mach-omap2/cm_common.c  |    2 +-
 arch/arm/mach-omap2/control.c    |    2 +-
 arch/arm/mach-omap2/prm_common.c |    2 +-
 5 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 3327128..d9885b8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <linux/regmap.h>
 #include <linux/of_address.h>
 #include <asm/cpu.h>
 
@@ -73,20 +74,37 @@ struct ti_clk_features ti_clk_features;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
-static void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+struct clk_iomap {
+	struct regmap *regmap;
+	void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
 
 static void clk_memmap_writel(u32 val, void __iomem *reg)
 {
 	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
 
-	writel_relaxed(val, clk_memmaps[r->index] + r->offset);
+	if (io->regmap)
+		regmap_write(io->regmap, r->offset, val);
+	else
+		writel_relaxed(val, io->mem + r->offset);
 }
 
 static u32 clk_memmap_readl(void __iomem *reg)
 {
+	u32 val;
 	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
+
+	if (io->regmap)
+		regmap_read(io->regmap, r->offset, &val);
+	else
+		val = readl_relaxed(io->mem + r->offset);
 
-	return readl_relaxed(clk_memmaps[r->index] + r->offset);
+	return val;
 }
 
 void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
@@ -119,18 +137,27 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
  * @match_table: DT device table to match for devices to init
  * @np: device node pointer for the this clock provider
  * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
+ + @syscon: syscon regmap pointer
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ *	 syscon is not provided
  *
  * Initializes a clock provider module (CM/PRM etc.), registering
  * the memory mapping at specified index and initializing the
  * low level driver infrastructure. Returns 0 in success.
  */
 int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   void __iomem *mem)
+				   struct regmap *syscon, void __iomem *mem)
 {
+	struct clk_iomap *io;
+
 	ti_clk_ll_ops = &omap_clk_ll_ops;
 
-	clk_memmaps[index] = mem;
+	io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+	io->regmap = syscon;
+	io->mem = mem;
+
+	clk_memmaps[index] = io;
 
 	ti_dt_clk_init_provider(np, index);
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b6433fc..652ed0a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -274,8 +274,10 @@ extern const struct clksel_rate div31_1to31_rates[];
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 
+struct regmap;
+
 int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   void __iomem *mem);
+				   struct regmap *syscon, void __iomem *mem);
 void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
 
 void __init ti_clk_init_features(void);
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 0845194..2582651 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -332,7 +332,7 @@ int __init omap_cm_init(void)
 		if (data->flags & CM_NO_CLOCKS)
 			continue;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 074c333..2b54250 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -675,7 +675,7 @@ int __init omap_control_init(void)
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 44221fe..eb9e0c2 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -766,7 +766,7 @@ int __init omap_prcm_init(void)
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
-- 
1.7.9.5

[PATCHv4 21/35] ARM: OMAP2+: clock: add low-level support for regmap

[Tero Kristo]

Some of the TI clock providers will be converted to use syscon, thus
low-level regmap support is needed for the clock drivers also. This
patch adds this support, which can be enabled for individual drivers
in later patches.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c      |   39 ++++++++++++++++++++++++++++++++------
 arch/arm/mach-omap2/clock.h      |    4 +++-
 arch/arm/mach-omap2/cm_common.c  |    2 +-
 arch/arm/mach-omap2/control.c    |    2 +-
 arch/arm/mach-omap2/prm_common.c |    2 +-
 5 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 3327128..d9885b8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <linux/regmap.h>
 #include <linux/of_address.h>
 #include <asm/cpu.h>
 
@@ -73,20 +74,37 @@ struct ti_clk_features ti_clk_features;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
-static void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+struct clk_iomap {
+	struct regmap *regmap;
+	void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
 
 static void clk_memmap_writel(u32 val, void __iomem *reg)
 {
 	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
 
-	writel_relaxed(val, clk_memmaps[r->index] + r->offset);
+	if (io->regmap)
+		regmap_write(io->regmap, r->offset, val);
+	else
+		writel_relaxed(val, io->mem + r->offset);
 }
 
 static u32 clk_memmap_readl(void __iomem *reg)
 {
+	u32 val;
 	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+	struct clk_iomap *io = clk_memmaps[r->index];
+
+	if (io->regmap)
+		regmap_read(io->regmap, r->offset, &val);
+	else
+		val = readl_relaxed(io->mem + r->offset);
 
-	return readl_relaxed(clk_memmaps[r->index] + r->offset);
+	return val;
 }
 
 void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
@@ -119,18 +137,27 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
  * @match_table: DT device table to match for devices to init
  * @np: device node pointer for the this clock provider
  * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
+ + @syscon: syscon regmap pointer
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ *	 syscon is not provided
  *
  * Initializes a clock provider module (CM/PRM etc.), registering
  * the memory mapping at specified index and initializing the
  * low level driver infrastructure. Returns 0 in success.
  */
 int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   void __iomem *mem)
+				   struct regmap *syscon, void __iomem *mem)
 {
+	struct clk_iomap *io;
+
 	ti_clk_ll_ops = &omap_clk_ll_ops;
 
-	clk_memmaps[index] = mem;
+	io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+	io->regmap = syscon;
+	io->mem = mem;
+
+	clk_memmaps[index] = io;
 
 	ti_dt_clk_init_provider(np, index);
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b6433fc..652ed0a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -274,8 +274,10 @@ extern const struct clksel_rate div31_1to31_rates[];
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 
+struct regmap;
+
 int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   void __iomem *mem);
+				   struct regmap *syscon, void __iomem *mem);
 void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
 
 void __init ti_clk_init_features(void);
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 0845194..2582651 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -332,7 +332,7 @@ int __init omap_cm_init(void)
 		if (data->flags & CM_NO_CLOCKS)
 			continue;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 074c333..2b54250 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -675,7 +675,7 @@ int __init omap_control_init(void)
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 44221fe..eb9e0c2 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -766,7 +766,7 @@ int __init omap_prcm_init(void)
 	for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, data->mem);
+		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
 		if (ret)
 			return ret;
 	}
-- 
1.7.9.5

[PATCHv4 22/35] ARM: OMAP2+: control: remove API for getting control module base address

[Tero Kristo]

This shall not be used anymore, as control module driver is converted
into using regmap.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |    5 -----
 arch/arm/mach-omap2/control.h |    2 --
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 2b54250..a9aee85 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -145,11 +145,6 @@ void __init omap2_set_globals_control(void __iomem *ctrl,
 	omap4_ctrl_pad_base = ctrl_pad;
 }
 
-void __iomem *omap_ctrl_base_get(void)
-{
-	return omap2_ctrl_base;
-}
-
 u8 omap_ctrl_readb(u16 offset)
 {
 	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c1057eb..5353ff4 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -440,7 +440,6 @@
 
 #ifndef __ASSEMBLY__
 #ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
 extern u32 omap_ctrl_readl(u16 offset);
@@ -470,7 +469,6 @@ extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 void __init omap3_control_legacy_iomap_init(void);
 #else
-#define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
 #define omap_ctrl_readw(x)		0
 #define omap_ctrl_readl(x)		0
-- 
1.7.9.5

[PATCHv4 22/35] ARM: OMAP2+: control: remove API for getting control module base address

[Tero Kristo]

This shall not be used anymore, as control module driver is converted
into using regmap.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |    5 -----
 arch/arm/mach-omap2/control.h |    2 --
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 2b54250..a9aee85 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -145,11 +145,6 @@ void __init omap2_set_globals_control(void __iomem *ctrl,
 	omap4_ctrl_pad_base = ctrl_pad;
 }
 
-void __iomem *omap_ctrl_base_get(void)
-{
-	return omap2_ctrl_base;
-}
-
 u8 omap_ctrl_readb(u16 offset)
 {
 	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c1057eb..5353ff4 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -440,7 +440,6 @@
 
 #ifndef __ASSEMBLY__
 #ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
 extern u32 omap_ctrl_readl(u16 offset);
@@ -470,7 +469,6 @@ extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 void __init omap3_control_legacy_iomap_init(void);
 #else
-#define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
 #define omap_ctrl_readw(x)		0
 #define omap_ctrl_readl(x)		0
-- 
1.7.9.5

[PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Tero Kristo]

There is no need to read the register with every invocation of the function,
as the value is constant. Thus, cache the value in a static variable.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/id.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2a2f4d5..1f5949f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
 
 int omap_type(void)
 {
-	u32 val = 0;
+	static u32 val = OMAP2_DEVICETYPE_MASK + 1;
+
+	if (val < OMAP2_DEVICETYPE_MASK)
+		return val;
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-- 
1.7.9.5

[PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Tero Kristo]

There is no need to read the register with every invocation of the function,
as the value is constant. Thus, cache the value in a static variable.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/id.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2a2f4d5..1f5949f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
 
 int omap_type(void)
 {
-	u32 val = 0;
+	static u32 val = OMAP2_DEVICETYPE_MASK + 1;
+
+	if (val < OMAP2_DEVICETYPE_MASK)
+		return val;
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-- 
1.7.9.5

Re: [PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Sergei Shtylyov]

Hello.

On 03/18/2015 05:44 PM, Tero Kristo wrote:

> There is no need to read the register with every invocation of the function,
> as the value is constant. Thus, cache the value in a static variable.

> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>   arch/arm/mach-omap2/id.c |    5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)

> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 2a2f4d5..1f5949f 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
>
>   int omap_type(void)
>   {
> -	u32 val = 0;
> +	static u32 val = OMAP2_DEVICETYPE_MASK + 1;
> +
> +	if (val < OMAP2_DEVICETYPE_MASK)

    <=, perhaps?

> +		return val;
[...]

WBR, Sergei

[PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Sergei Shtylyov]

Hello.

On 03/18/2015 05:44 PM, Tero Kristo wrote:

> There is no need to read the register with every invocation of the function,
> as the value is constant. Thus, cache the value in a static variable.

> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>   arch/arm/mach-omap2/id.c |    5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)

> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 2a2f4d5..1f5949f 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
>
>   int omap_type(void)
>   {
> -	u32 val = 0;
> +	static u32 val = OMAP2_DEVICETYPE_MASK + 1;
> +
> +	if (val < OMAP2_DEVICETYPE_MASK)

    <=, perhaps?

> +		return val;
[...]

WBR, Sergei

Re: [PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Tero Kristo]

On 03/18/2015 08:24 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 03/18/2015 05:44 PM, Tero Kristo wrote:
>
>> There is no need to read the register with every invocation of the
>> function,
>> as the value is constant. Thus, cache the value in a static variable.
>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/mach-omap2/id.c |    5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>
>> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
>> index 2a2f4d5..1f5949f 100644
>> --- a/arch/arm/mach-omap2/id.c
>> +++ b/arch/arm/mach-omap2/id.c
>> @@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
>>
>>   int omap_type(void)
>>   {
>> -    u32 val = 0;
>> +    static u32 val = OMAP2_DEVICETYPE_MASK + 1;
>> +
>> +    if (val < OMAP2_DEVICETYPE_MASK)
>
>     <=, perhaps?

Hmm right, there is something fishy with this patch. Basically either 
comparison works as the MASK is a shifted value which is always several 
magnitudes larger than the resulting omap_type value itself. The +1 part 
in the init value is completely unnecessary though.

-Tero

>
>> +        return val;
> [...]
>
> WBR, Sergei
>

[PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value

[Tero Kristo]

On 03/18/2015 08:24 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 03/18/2015 05:44 PM, Tero Kristo wrote:
>
>> There is no need to read the register with every invocation of the
>> function,
>> as the value is constant. Thus, cache the value in a static variable.
>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/mach-omap2/id.c |    5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>
>> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
>> index 2a2f4d5..1f5949f 100644
>> --- a/arch/arm/mach-omap2/id.c
>> +++ b/arch/arm/mach-omap2/id.c
>> @@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev);
>>
>>   int omap_type(void)
>>   {
>> -    u32 val = 0;
>> +    static u32 val = OMAP2_DEVICETYPE_MASK + 1;
>> +
>> +    if (val < OMAP2_DEVICETYPE_MASK)
>
>     <=, perhaps?

Hmm right, there is something fishy with this patch. Basically either 
comparison works as the MASK is a shifted value which is always several 
magnitudes larger than the resulting omap_type value itself. The +1 part 
in the init value is completely unnecessary though.

-Tero

>
>> +        return val;
> [...]
>
> WBR, Sergei
>

[PATCHv4 24/35] ARM: OMAP2+: control: add syscon support for register accesses

[Tero Kristo]

Control module driver needs to support syscon for register accesses, as
the DT hierarchy for control module driver is going to be changed. All
the control module related features will be moved under control module
node, including clocks, pinctrl, and generic configuration register
access. Temporary iomap is still provided very early in the boot for
access while syscon is not yet ready.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |  101 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 84 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a9aee85..edc0f26 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,6 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #include "soc.h"
 #include "iomap.h"
@@ -33,7 +35,9 @@
 #define PADCONF_SAVE_DONE		0x1
 
 static void __iomem *omap2_ctrl_base;
+static s16 omap2_ctrl_offset;
 static void __iomem *omap4_ctrl_pad_base;
+static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 struct omap3_scratchpad {
@@ -135,7 +139,6 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 #define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
 
 void __init omap2_set_globals_control(void __iomem *ctrl,
@@ -147,32 +150,72 @@ void __init omap2_set_globals_control(void __iomem *ctrl,
 
 u8 omap_ctrl_readb(u16 offset)
 {
-	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+	u8 byte_offset = offset & 0x3;
+
+	val = omap_ctrl_readl(offset);
+
+	return (val >> (byte_offset * 8)) & 0xff;
 }
 
 u16 omap_ctrl_readw(u16 offset)
 {
-	return readw_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+	u16 byte_offset = offset & 0x2;
+
+	val = omap_ctrl_readl(offset);
+
+	return (val >> (byte_offset * 8)) & 0xffff;
 }
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	return readl_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+
+	offset &= 0xfffc;
+	if (!omap2_ctrl_syscon)
+		val = readl_relaxed(omap2_ctrl_base + offset);
+	else
+		regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+			    &val);
+
+	return val;
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	u32 tmp;
+	u8 byte_offset = offset & 0x3;
+
+	tmp = omap_ctrl_readl(offset);
+
+	tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
+	tmp |= val << (byte_offset * 8);
+
+	omap_ctrl_writel(tmp, offset);
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	u32 tmp;
+	u8 byte_offset = offset & 0x2;
+
+	tmp = omap_ctrl_readl(offset);
+
+	tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
+	tmp |= val << (byte_offset * 8);
+
+	omap_ctrl_writel(tmp, offset);
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	offset &= 0xfffc;
+	if (!omap2_ctrl_syscon)
+		writel_relaxed(val, omap2_ctrl_base + offset);
+	else
+		regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+			     val);
 }
 
 /*
@@ -611,7 +654,7 @@ void __init omap3_ctrl_init(void)
 
 struct control_init_data {
 	int index;
-	void __iomem *mem;
+	s16 offset;
 };
 
 static struct control_init_data ctrl_data = {
@@ -638,17 +681,15 @@ int __init omap2_control_base_init(void)
 	struct device_node *np;
 	const struct of_device_id *match;
 	struct control_init_data *data;
-	void __iomem *mem;
 
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = (struct control_init_data *)match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
+		omap2_ctrl_base = of_iomap(np, 0);
+		if (!omap2_ctrl_base)
 			return -ENOMEM;
 
-		omap2_ctrl_base = mem;
-		data->mem = mem;
+		omap2_ctrl_offset = data->offset;
 	}
 
 	return 0;
@@ -662,17 +703,43 @@ int __init omap2_control_base_init(void)
  */
 int __init omap_control_init(void)
 {
-	struct device_node *np;
+	struct device_node *np, *scm_conf;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
+	struct regmap *syscon;
 
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
-			return ret;
+		/*
+		 * Check if we have scm_conf node, if yes, use this to
+		 * access clock registers.
+		 */
+		scm_conf = of_get_child_by_name(np, "scm_conf");
+
+		if (scm_conf) {
+			syscon = syscon_node_to_regmap(scm_conf);
+
+			if (IS_ERR(syscon))
+				return PTR_ERR(syscon);
+
+			omap2_ctrl_syscon = syscon;
+
+			ret = omap2_clk_provider_init(scm_conf, data->index,
+						      syscon, NULL);
+			if (ret)
+				return ret;
+
+			iounmap(omap2_ctrl_base);
+			omap2_ctrl_base = NULL;
+		} else {
+			/* No scm_conf found, direct access */
+			ret = omap2_clk_provider_init(np, data->index, NULL,
+						      omap2_ctrl_base);
+			if (ret)
+				return ret;
+		}
 	}
 
 	return 0;
-- 
1.7.9.5

[PATCHv4 24/35] ARM: OMAP2+: control: add syscon support for register accesses

[Tero Kristo]

Control module driver needs to support syscon for register accesses, as
the DT hierarchy for control module driver is going to be changed. All
the control module related features will be moved under control module
node, including clocks, pinctrl, and generic configuration register
access. Temporary iomap is still provided very early in the boot for
access while syscon is not yet ready.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |  101 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 84 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a9aee85..edc0f26 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,6 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #include "soc.h"
 #include "iomap.h"
@@ -33,7 +35,9 @@
 #define PADCONF_SAVE_DONE		0x1
 
 static void __iomem *omap2_ctrl_base;
+static s16 omap2_ctrl_offset;
 static void __iomem *omap4_ctrl_pad_base;
+static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 struct omap3_scratchpad {
@@ -135,7 +139,6 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 #define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
 
 void __init omap2_set_globals_control(void __iomem *ctrl,
@@ -147,32 +150,72 @@ void __init omap2_set_globals_control(void __iomem *ctrl,
 
 u8 omap_ctrl_readb(u16 offset)
 {
-	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+	u8 byte_offset = offset & 0x3;
+
+	val = omap_ctrl_readl(offset);
+
+	return (val >> (byte_offset * 8)) & 0xff;
 }
 
 u16 omap_ctrl_readw(u16 offset)
 {
-	return readw_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+	u16 byte_offset = offset & 0x2;
+
+	val = omap_ctrl_readl(offset);
+
+	return (val >> (byte_offset * 8)) & 0xffff;
 }
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	return readl_relaxed(OMAP_CTRL_REGADDR(offset));
+	u32 val;
+
+	offset &= 0xfffc;
+	if (!omap2_ctrl_syscon)
+		val = readl_relaxed(omap2_ctrl_base + offset);
+	else
+		regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+			    &val);
+
+	return val;
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	u32 tmp;
+	u8 byte_offset = offset & 0x3;
+
+	tmp = omap_ctrl_readl(offset);
+
+	tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
+	tmp |= val << (byte_offset * 8);
+
+	omap_ctrl_writel(tmp, offset);
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	u32 tmp;
+	u8 byte_offset = offset & 0x2;
+
+	tmp = omap_ctrl_readl(offset);
+
+	tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
+	tmp |= val << (byte_offset * 8);
+
+	omap_ctrl_writel(tmp, offset);
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
+	offset &= 0xfffc;
+	if (!omap2_ctrl_syscon)
+		writel_relaxed(val, omap2_ctrl_base + offset);
+	else
+		regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+			     val);
 }
 
 /*
@@ -611,7 +654,7 @@ void __init omap3_ctrl_init(void)
 
 struct control_init_data {
 	int index;
-	void __iomem *mem;
+	s16 offset;
 };
 
 static struct control_init_data ctrl_data = {
@@ -638,17 +681,15 @@ int __init omap2_control_base_init(void)
 	struct device_node *np;
 	const struct of_device_id *match;
 	struct control_init_data *data;
-	void __iomem *mem;
 
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = (struct control_init_data *)match->data;
 
-		mem = of_iomap(np, 0);
-		if (!mem)
+		omap2_ctrl_base = of_iomap(np, 0);
+		if (!omap2_ctrl_base)
 			return -ENOMEM;
 
-		omap2_ctrl_base = mem;
-		data->mem = mem;
+		omap2_ctrl_offset = data->offset;
 	}
 
 	return 0;
@@ -662,17 +703,43 @@ int __init omap2_control_base_init(void)
  */
 int __init omap_control_init(void)
 {
-	struct device_node *np;
+	struct device_node *np, *scm_conf;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
+	struct regmap *syscon;
 
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = match->data;
 
-		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
-			return ret;
+		/*
+		 * Check if we have scm_conf node, if yes, use this to
+		 * access clock registers.
+		 */
+		scm_conf = of_get_child_by_name(np, "scm_conf");
+
+		if (scm_conf) {
+			syscon = syscon_node_to_regmap(scm_conf);
+
+			if (IS_ERR(syscon))
+				return PTR_ERR(syscon);
+
+			omap2_ctrl_syscon = syscon;
+
+			ret = omap2_clk_provider_init(scm_conf, data->index,
+						      syscon, NULL);
+			if (ret)
+				return ret;
+
+			iounmap(omap2_ctrl_base);
+			omap2_ctrl_base = NULL;
+		} else {
+			/* No scm_conf found, direct access */
+			ret = omap2_clk_provider_init(np, data->index, NULL,
+						      omap2_ctrl_base);
+			if (ret)
+				return ret;
+		}
 	}
 
 	return 0;
-- 
1.7.9.5

[PATCHv4 25/35] ARM: dts: omap24xx: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm node.
scm_conf area is changed to use syscon, and also the clocks are moved
under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap2420.dtsi        |   33 +++++++++++++++++---------
 arch/arm/boot/dts/omap2430-clocks.dtsi |    6 ++---
 arch/arm/boot/dts/omap2430.dtsi        |   40 ++++++++++++++++++--------------
 arch/arm/boot/dts/omap24xx-clocks.dtsi |    4 ++--
 arch/arm/mach-omap2/control.c          |    7 +++++-
 5 files changed, 56 insertions(+), 34 deletions(-)

diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e2b2e93..49bc2ee 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -28,12 +28,32 @@
 		};
 
 		scrm: scrm@48000000 {
-			compatible = "ti,omap2-scrm";
+			compatible = "ti,omap2-scrm", "simple-bus";
 			reg = <0x48000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000>;
 
-			scrm_clocks: clocks {
+			omap2420_pmx: pinmux@30 {
+				compatible = "ti,omap2420-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x0113>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <8>;
+				pinctrl-single,function-mask = <0x3f>;
+			};
+
+			scm_conf: scm_conf@270 {
+				compatible = "syscon";
+				reg = <0x270 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -46,15 +66,6 @@
 			ti,hwmods = "counter_32k";
 		};
 
-		omap2420_pmx: pinmux@48000030 {
-			compatible = "ti,omap2420-padconf", "pinctrl-single";
-			reg = <0x48000030 0x0113>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
 		gpio1: gpio@48018000 {
 			compatible = "ti,omap2-gpio";
 			reg = <0x48018000 0x200>;
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
index 805f75d..cb4b229 100644
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -13,7 +13,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -27,7 +27,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
@@ -41,7 +41,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 0dc8de2..e06d7eb 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -28,12 +28,32 @@
 		};
 
 		scrm: scrm@49002000 {
-			compatible = "ti,omap2-scrm";
+			compatible = "ti,omap2-scrm", "simple-bus";
 			reg = <0x49002000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x49000000 0x1000>;
 
-			scrm_clocks: clocks {
+			omap2430_pmx: pinmux@30 {
+				compatible = "ti,omap2430-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x0154>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <8>;
+				pinctrl-single,function-mask = <0x3f>;
+			};
+
+			scm_conf: scm_conf@270 {
+				compatible = "syscon";
+				reg = <0x270 0x240>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -46,24 +66,10 @@
 			ti,hwmods = "counter_32k";
 		};
 
-		omap2430_pmx: pinmux@49002030 {
-			compatible = "ti,omap2430-padconf", "pinctrl-single";
-			reg = <0x49002030 0x0154>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		omap2_scm_general: tisyscon@49002270 {
-			compatible = "syscon";
-			reg = <0x49002270 0x240>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x230 0x4>;
-			syscon = <&omap2_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
index a1365ca..a078b55 100644
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -13,7 +13,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x4>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -27,7 +27,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x4>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index edc0f26..5359bc3 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -661,10 +661,15 @@ static struct control_init_data ctrl_data = {
 	.index = TI_CLKM_CTRL,
 };
 
+static const struct control_init_data omap2_ctrl_data = {
+	.index = TI_CLKM_CTRL,
+	.offset = -OMAP2_CONTROL_GENERAL,
+};
+
 static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
-	{ .compatible = "ti,omap2-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
 	{ }
 };
-- 
1.7.9.5

[PATCHv4 25/35] ARM: dts: omap24xx: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm node.
scm_conf area is changed to use syscon, and also the clocks are moved
under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap2420.dtsi        |   33 +++++++++++++++++---------
 arch/arm/boot/dts/omap2430-clocks.dtsi |    6 ++---
 arch/arm/boot/dts/omap2430.dtsi        |   40 ++++++++++++++++++--------------
 arch/arm/boot/dts/omap24xx-clocks.dtsi |    4 ++--
 arch/arm/mach-omap2/control.c          |    7 +++++-
 5 files changed, 56 insertions(+), 34 deletions(-)

diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e2b2e93..49bc2ee 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -28,12 +28,32 @@
 		};
 
 		scrm: scrm at 48000000 {
-			compatible = "ti,omap2-scrm";
+			compatible = "ti,omap2-scrm", "simple-bus";
 			reg = <0x48000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000>;
 
-			scrm_clocks: clocks {
+			omap2420_pmx: pinmux at 30 {
+				compatible = "ti,omap2420-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x0113>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <8>;
+				pinctrl-single,function-mask = <0x3f>;
+			};
+
+			scm_conf: scm_conf at 270 {
+				compatible = "syscon";
+				reg = <0x270 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -46,15 +66,6 @@
 			ti,hwmods = "counter_32k";
 		};
 
-		omap2420_pmx: pinmux at 48000030 {
-			compatible = "ti,omap2420-padconf", "pinctrl-single";
-			reg = <0x48000030 0x0113>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
 		gpio1: gpio at 48018000 {
 			compatible = "ti,omap2-gpio";
 			reg = <0x48018000 0x200>;
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
index 805f75d..cb4b229 100644
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -13,7 +13,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -27,7 +27,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
@@ -41,7 +41,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02e8>;
+		reg = <0x78>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 0dc8de2..e06d7eb 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -28,12 +28,32 @@
 		};
 
 		scrm: scrm at 49002000 {
-			compatible = "ti,omap2-scrm";
+			compatible = "ti,omap2-scrm", "simple-bus";
 			reg = <0x49002000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x49000000 0x1000>;
 
-			scrm_clocks: clocks {
+			omap2430_pmx: pinmux at 30 {
+				compatible = "ti,omap2430-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x0154>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <8>;
+				pinctrl-single,function-mask = <0x3f>;
+			};
+
+			scm_conf: scm_conf at 270 {
+				compatible = "syscon";
+				reg = <0x270 0x240>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -46,24 +66,10 @@
 			ti,hwmods = "counter_32k";
 		};
 
-		omap2430_pmx: pinmux at 49002030 {
-			compatible = "ti,omap2430-padconf", "pinctrl-single";
-			reg = <0x49002030 0x0154>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		omap2_scm_general: tisyscon at 49002270 {
-			compatible = "syscon";
-			reg = <0x49002270 0x240>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x230 0x4>;
-			syscon = <&omap2_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
index a1365ca..a078b55 100644
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -13,7 +13,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x4>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -27,7 +27,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x4>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index edc0f26..5359bc3 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -661,10 +661,15 @@ static struct control_init_data ctrl_data = {
 	.index = TI_CLKM_CTRL,
 };
 
+static const struct control_init_data omap2_ctrl_data = {
+	.index = TI_CLKM_CTRL,
+	.offset = -OMAP2_CONTROL_GENERAL,
+};
+
 static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
-	{ .compatible = "ti,omap2-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
 	{ }
 };
-- 
1.7.9.5

[PATCHv4 26/35] ARM: dts: omap3: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm node.
scm_conf area is changed to use syscon, and also the clocks are moved
under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/prcm.txt          |    1 +
 arch/arm/boot/dts/am3517.dtsi                      |    2 +-
 arch/arm/boot/dts/omap3.dtsi                       |   75 ++++++++++++--------
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             |   10 +--
 arch/arm/mach-omap2/control.c                      |    2 +-
 5 files changed, 53 insertions(+), 37 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 68f96f8..98ab498 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -18,6 +18,7 @@ Required properties:
 		"ti,omap3-prm"
 		"ti,omap3-cm"
 		"ti,omap3-scrm"
+		"ti,omap3-scrm-wkup"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index c90724b..f164dce 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -31,7 +31,7 @@
 			status = "disabled";
 			reg = <0x5c000000 0x30000>;
 			interrupts = <67 68 69 70>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0x10000>;
 			ti,davinci-ctrl-mod-reg-offset = <0>;
 			ti,davinci-ctrl-ram-offset = <0x20000>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..14b2f3f 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -122,18 +122,60 @@
 		};
 
 		scrm: scrm@48002000 {
-			compatible = "ti,omap3-scrm";
+			compatible = "ti,omap3-scrm", "simple-bus";
 			reg = <0x48002000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48002000 0xa00>;
 
-			scrm_clocks: clocks {
+			omap3_pmx_core: pinmux@30 {
+				compatible = "ti,omap3-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x230>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xff1f>;
+			};
+
+			scm_conf: scm_conf@270 {
+				compatible = "syscon";
+				reg = <0x270 0x330>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
 			};
 		};
 
+		scrm_wkup: scrm_wkup@48002a00 {
+			compatible = "ti,omap3-scrm-wkup", "simple-bus";
+			reg = <0x48002a00 0x1600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48002a00 0x1600>;
+
+			omap3_pmx_wkup: pinmux@0 {
+				compatible = "ti,omap3-padconf",
+					     "pinctrl-single";
+				reg = <0x0 0x5c>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xff1f>;
+			};
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -159,37 +201,10 @@
 			#dma-requests = <96>;
 		};
 
-		omap3_pmx_core: pinmux@48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux@48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon@48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 5c37500..ecc25ac 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -85,7 +85,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -99,7 +99,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -113,7 +113,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
@@ -126,7 +126,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -140,7 +140,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 5359bc3..f756f21 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -670,7 +670,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
-	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scrm", .data = &omap2_ctrl_data },
 	{ }
 };
 
-- 
1.7.9.5

[PATCHv4 26/35] ARM: dts: omap3: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm node.
scm_conf area is changed to use syscon, and also the clocks are moved
under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/prcm.txt          |    1 +
 arch/arm/boot/dts/am3517.dtsi                      |    2 +-
 arch/arm/boot/dts/omap3.dtsi                       |   75 ++++++++++++--------
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             |   10 +--
 arch/arm/mach-omap2/control.c                      |    2 +-
 5 files changed, 53 insertions(+), 37 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 68f96f8..98ab498 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -18,6 +18,7 @@ Required properties:
 		"ti,omap3-prm"
 		"ti,omap3-cm"
 		"ti,omap3-scrm"
+		"ti,omap3-scrm-wkup"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index c90724b..f164dce 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -31,7 +31,7 @@
 			status = "disabled";
 			reg = <0x5c000000 0x30000>;
 			interrupts = <67 68 69 70>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0x10000>;
 			ti,davinci-ctrl-mod-reg-offset = <0>;
 			ti,davinci-ctrl-ram-offset = <0x20000>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..14b2f3f 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -122,18 +122,60 @@
 		};
 
 		scrm: scrm at 48002000 {
-			compatible = "ti,omap3-scrm";
+			compatible = "ti,omap3-scrm", "simple-bus";
 			reg = <0x48002000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48002000 0xa00>;
 
-			scrm_clocks: clocks {
+			omap3_pmx_core: pinmux at 30 {
+				compatible = "ti,omap3-padconf",
+					     "pinctrl-single";
+				reg = <0x30 0x230>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xff1f>;
+			};
+
+			scm_conf: scm_conf at 270 {
+				compatible = "syscon";
+				reg = <0x270 0x330>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
 			};
 		};
 
+		scrm_wkup: scrm_wkup at 48002a00 {
+			compatible = "ti,omap3-scrm-wkup", "simple-bus";
+			reg = <0x48002a00 0x1600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48002a00 0x1600>;
+
+			omap3_pmx_wkup: pinmux at 0 {
+				compatible = "ti,omap3-padconf",
+					     "pinctrl-single";
+				reg = <0x0 0x5c>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xff1f>;
+			};
+		};
+
 		counter32k: counter at 48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -159,37 +201,10 @@
 			#dma-requests = <96>;
 		};
 
-		omap3_pmx_core: pinmux at 48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux at 48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon at 48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 5c37500..ecc25ac 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -85,7 +85,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -99,7 +99,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -113,7 +113,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
@@ -126,7 +126,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -140,7 +140,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 5359bc3..f756f21 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -670,7 +670,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
-	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scrm", .data = &omap2_ctrl_data },
 	{ }
 };
 
-- 
1.7.9.5

[PATCHv4 27/35] ARM: dts: am33xx: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm
node. scm_conf area is changed to use syscon, and also the clocks
are moved under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |   48 ++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index acd3705..b30e238 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -83,20 +83,6 @@
 		};
 	};
 
-	am33xx_control_module: control_module@4a002000 {
-		compatible = "syscon";
-		reg = <0x44e10000 0x7fc>;
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x0238>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7f>;
-	};
-
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex. Since
@@ -125,21 +111,35 @@
 		};
 
 		scrm: scrm@44e10000 {
-			compatible = "ti,am3-scrm";
+			compatible = "ti,am3-scrm", "simple-bus";
 			reg = <0x44e10000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44e10000 0x2000>;
 
-			scrm_clocks: clocks {
+			am33xx_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x238>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x7f>;
 			};
 
-			scrm_clockdomains: clockdomains {
+			scm_conf: scm_conf@0 {
+				compatible = "syscon";
+				reg = <0x0 0x7fc>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
-		};
 
-		cm: syscon@44e10000 {
-			compatible = "ti,am33xx-controlmodule", "syscon";
-			reg = <0x44e10000 0x800>;
+			scrm_clockdomains: clockdomains {
+			};
 		};
 
 		intc: interrupt-controller@48200000 {
@@ -350,7 +350,7 @@
 			reg = <0x481cc000 0x2000>;
 			clocks = <&dcan0_fck>;
 			clock-names = "fck";
-			syscon-raminit = <&am33xx_control_module 0x644 0>;
+			syscon-raminit = <&scm_conf 0x644 0>;
 			interrupts = <52>;
 			status = "disabled";
 		};
@@ -361,7 +361,7 @@
 			reg = <0x481d0000 0x2000>;
 			clocks = <&dcan1_fck>;
 			clock-names = "fck";
-			syscon-raminit = <&am33xx_control_module 0x644 1>;
+			syscon-raminit = <&scm_conf 0x644 1>;
 			interrupts = <55>;
 			status = "disabled";
 		};
@@ -720,7 +720,7 @@
 			 */
 			interrupts = <40 41 42 43>;
 			ranges;
-			syscon = <&cm>;
+			syscon = <&scm_conf>;
 			status = "disabled";
 
 			davinci_mdio: mdio@4a101000 {
-- 
1.7.9.5

[PATCHv4 27/35] ARM: dts: am33xx: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm
node. scm_conf area is changed to use syscon, and also the clocks
are moved under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |   48 ++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index acd3705..b30e238 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -83,20 +83,6 @@
 		};
 	};
 
-	am33xx_control_module: control_module at 4a002000 {
-		compatible = "syscon";
-		reg = <0x44e10000 0x7fc>;
-	};
-
-	am33xx_pinmux: pinmux at 44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x0238>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7f>;
-	};
-
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex. Since
@@ -125,21 +111,35 @@
 		};
 
 		scrm: scrm at 44e10000 {
-			compatible = "ti,am3-scrm";
+			compatible = "ti,am3-scrm", "simple-bus";
 			reg = <0x44e10000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44e10000 0x2000>;
 
-			scrm_clocks: clocks {
+			am33xx_pinmux: pinmux at 800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x238>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x7f>;
 			};
 
-			scrm_clockdomains: clockdomains {
+			scm_conf: scm_conf at 0 {
+				compatible = "syscon";
+				reg = <0x0 0x7fc>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
-		};
 
-		cm: syscon at 44e10000 {
-			compatible = "ti,am33xx-controlmodule", "syscon";
-			reg = <0x44e10000 0x800>;
+			scrm_clockdomains: clockdomains {
+			};
 		};
 
 		intc: interrupt-controller at 48200000 {
@@ -350,7 +350,7 @@
 			reg = <0x481cc000 0x2000>;
 			clocks = <&dcan0_fck>;
 			clock-names = "fck";
-			syscon-raminit = <&am33xx_control_module 0x644 0>;
+			syscon-raminit = <&scm_conf 0x644 0>;
 			interrupts = <52>;
 			status = "disabled";
 		};
@@ -361,7 +361,7 @@
 			reg = <0x481d0000 0x2000>;
 			clocks = <&dcan1_fck>;
 			clock-names = "fck";
-			syscon-raminit = <&am33xx_control_module 0x644 1>;
+			syscon-raminit = <&scm_conf 0x644 1>;
 			interrupts = <55>;
 			status = "disabled";
 		};
@@ -720,7 +720,7 @@
 			 */
 			interrupts = <40 41 42 43>;
 			ranges;
-			syscon = <&cm>;
+			syscon = <&scm_conf>;
 			status = "disabled";
 
 			davinci_mdio: mdio at 4a101000 {
-- 
1.7.9.5

[PATCHv4 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout

[Tero Kristo]

Pinmux node should be a reference to the base one, not a complete re-write
of it. Having the node like this also prevents modifying the node layout
in the base am4372.dtsi file, which is needed for control module changes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts |   84 +++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..72f01bb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -69,7 +69,48 @@
 		};
 	};
 
-	am43xx_pinmux: pinmux@44e10800 {
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+		linux,keymap = <0x00000201	/* P1 */
+			0x01000204	/* P4 */
+			0x02000207	/* P7 */
+			0x0300020a	/* NUMERIC_STAR */
+			0x00010202	/* P2 */
+			0x01010205	/* P5 */
+			0x02010208	/* P8 */
+			0x03010200	/* P0 */
+			0x00020203	/* P3 */
+			0x01020206	/* P6 */
+			0x02020209	/* P9 */
+			0x0302020b	/* NUMERIC_POUND */
+			0x00030067	/* UP */
+			0x0103006a	/* RIGHT */
+			0x0203006c	/* DOWN */
+			0x03030069>;	/* LEFT */
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&am43xx_pinmux {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
@@ -279,47 +320,6 @@
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
 };
 
 &mmc1 {
-- 
1.7.9.5

[PATCHv4 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout

[Tero Kristo]

Pinmux node should be a reference to the base one, not a complete re-write
of it. Having the node like this also prevents modifying the node layout
in the base am4372.dtsi file, which is needed for control module changes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts |   84 +++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..72f01bb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -69,7 +69,48 @@
 		};
 	};
 
-	am43xx_pinmux: pinmux at 44e10800 {
+	matrix_keypad: matrix_keypad at 0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+		linux,keymap = <0x00000201	/* P1 */
+			0x01000204	/* P4 */
+			0x02000207	/* P7 */
+			0x0300020a	/* NUMERIC_STAR */
+			0x00010202	/* P2 */
+			0x01010205	/* P5 */
+			0x02010208	/* P8 */
+			0x03010200	/* P0 */
+			0x00020203	/* P3 */
+			0x01020206	/* P6 */
+			0x02020209	/* P9 */
+			0x0302020b	/* NUMERIC_POUND */
+			0x00030067	/* UP */
+			0x0103006a	/* RIGHT */
+			0x0203006c	/* DOWN */
+			0x03030069>;	/* LEFT */
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&am43xx_pinmux {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
@@ -279,47 +320,6 @@
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
-	};
-
-	matrix_keypad: matrix_keypad at 0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
 };
 
 &mmc1 {
-- 
1.7.9.5

[PATCHv4 29/35] ARM: dts: am4372: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm
node. scm_conf area is provided to support syscon, and also the clocks
are moved under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi |   48 +++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..f41b82a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -57,22 +57,6 @@
 		cache-level = <2>;
 	};
 
-	am43xx_control_module: control_module@4a002000 {
-		compatible = "syscon";
-		reg = <0x44e10000 0x7f4>;
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		compatible = "ti,am437-padconf", "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
 	ocp {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
@@ -98,12 +82,34 @@
 		};
 
 		scrm: scrm@44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
+			compatible = "ti,am4-scrm", "simple-bus";
+			reg = <0x44e10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44e10000 0x1000>;
 
-			scrm_clocks: clocks {
+			am43xx_pinmux: pinmux@800 {
+				compatible = "ti,am437-padconf",
+					     "pinctrl-single";
+				reg = <0x800 0x31c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0xffffffff>;
+			};
+
+			scm_conf: scm_conf@0 {
+				compatible = "syscon";
+				reg = <0x0 0x7fc>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -933,7 +939,7 @@
 			clocks = <&dcan0_fck>;
 			clock-names = "fck";
 			reg = <0x481cc000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 0>;
+			syscon-raminit = <&scm_conf 0x644 0>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -944,7 +950,7 @@
 			clocks = <&dcan1_fck>;
 			clock-names = "fck";
 			reg = <0x481d0000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 1>;
+			syscon-raminit = <&scm_conf 0x644 1>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
-- 
1.7.9.5

[PATCHv4 29/35] ARM: dts: am4372: merge control module features under scrm node

[Tero Kristo]

This patch moves all the control module related features under scrm
node. scm_conf area is provided to support syscon, and also the clocks
are moved under scm_conf area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi |   48 +++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..f41b82a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -57,22 +57,6 @@
 		cache-level = <2>;
 	};
 
-	am43xx_control_module: control_module at 4a002000 {
-		compatible = "syscon";
-		reg = <0x44e10000 0x7f4>;
-	};
-
-	am43xx_pinmux: pinmux at 44e10800 {
-		compatible = "ti,am437-padconf", "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
 	ocp {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
@@ -98,12 +82,34 @@
 		};
 
 		scrm: scrm at 44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
+			compatible = "ti,am4-scrm", "simple-bus";
+			reg = <0x44e10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44e10000 0x1000>;
 
-			scrm_clocks: clocks {
+			am43xx_pinmux: pinmux at 800 {
+				compatible = "ti,am437-padconf",
+					     "pinctrl-single";
+				reg = <0x800 0x31c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0xffffffff>;
+			};
+
+			scm_conf: scm_conf at 0 {
+				compatible = "syscon";
+				reg = <0x0 0x7fc>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			scrm_clockdomains: clockdomains {
@@ -933,7 +939,7 @@
 			clocks = <&dcan0_fck>;
 			clock-names = "fck";
 			reg = <0x481cc000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 0>;
+			syscon-raminit = <&scm_conf 0x644 0>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -944,7 +950,7 @@
 			clocks = <&dcan1_fck>;
 			clock-names = "fck";
 			reg = <0x481d0000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 1>;
+			syscon-raminit = <&scm_conf 0x644 1>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
-- 
1.7.9.5

[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added. DT documentation is also updated by
this patch to reflect the existence of system control module nodes,
separately of PRCM module.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |   77 +++++++++++++++++++
 .../devicetree/bindings/arm/omap/prcm.txt          |    7 --
 arch/arm/boot/dts/omap4.dtsi                       |   81 +++++++++++++-------
 3 files changed, 132 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/ctrl.txt

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
new file mode 100644
index 0000000..8f2b481
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -0,0 +1,77 @@
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-scrm"
+		"ti,am4-scrm"
+		"ti,dm814-scrm"
+		"ti,dm816-scrm"
+		"ti,omap2-scrm"
+		"ti,omap3-scrm"
+		"ti,omap3-scrm-wkup"
+		"ti,omap4-ctrl"
+		"ti,omap4-ctrl-wkup"
+- reg:		Contains Control Module register address range
+		(base address and length)
+
+Optional properties:
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Examples:
+
+scrm: scrm@48002000 {
+	compatible = "ti,omap3-scrm", "simple-bus";
+	reg = <0x48002000 0x2000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x48002000 0x2000>;
+
+	omap3_pmx_core: pinmux@30 {
+		compatible = "ti,omap3-padconf",
+			     "pinctrl-single";
+		reg = <0x30 0x230>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		pinctrl-single,register-width = <16>;
+		pinctrl-single,function-mask = <0xff1f>;
+	};
+
+	scm_conf: scm_conf@270 {
+		compatible = "syscon";
+		reg = <0x270 0x330>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scrm_clocks: clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	scrm_clockdomains: clockdomains {
+	};
+}
+
+&scrm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 98ab498..3eb6d7a 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -10,15 +10,10 @@ documentation about the individual clock/clockdomain nodes.
 Required properties:
 - compatible:	Must be one of:
 		"ti,am3-prcm"
-		"ti,am3-scrm"
 		"ti,am4-prcm"
-		"ti,am4-scrm"
 		"ti,omap2-prcm"
-		"ti,omap2-scrm"
 		"ti,omap3-prm"
 		"ti,omap3-cm"
-		"ti,omap3-scrm"
-		"ti,omap3-scrm-wkup"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
@@ -31,9 +26,7 @@ Required properties:
 		"ti,dra7-cm-core-aon"
 		"ti,dra7-cm-core"
 		"ti,dm814-prcm"
-		"ti,dm814-scrm"
 		"ti,dm816-prcm"
-		"ti,dm816-scrm"
 - reg:		Contains PRCM module register address range
 		(base address and length)
 - clocks:	clocks for this module
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..dec7f57 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -167,36 +167,65 @@
 			};
 		};
 
-		counter32k: counter@4a304000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4a304000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
+		scm: scm@4a002000 {
+			compatible = "ti,omap4-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1000>,
+			      <0x4a100000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1000>,
+				 <1 0 0x4a100000 0x1000>;
 
-		omap4_pmx_core: pinmux@4a100040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a100040 0x0196>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+			scm_conf: scm_conf@0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			omap4_pmx_core: pinmux@1,40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0196>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap4_padconf_global: omap4_padconf_global@1,5a0 {
+				compatible = "syscon";
+				reg = <1 0x5a0 0x170>;
+			};
 		};
-		omap4_pmx_wkup: pinmux@4a31e040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a31e040 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+
+		scm_wkup: scm_wkup@4a30a000 {
+			compatible = "ti,omap4-ctrl-wkup", "simple-bus";
+			reg = <0x4a30a000 0x1000>, <0x4a31e000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a30a000 0x1000>,
+				 <1 0 0x4a31e000 0x1000>;
+
+			omap4_pmx_wkup: pinmux@1,40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
 		};
 
-		omap4_padconf_global: tisyscon@4a1005a0 {
-			compatible = "syscon";
-			reg = <0x4a1005a0 0x170>;
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
-- 
1.7.9.5

[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added. DT documentation is also updated by
this patch to reflect the existence of system control module nodes,
separately of PRCM module.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |   77 +++++++++++++++++++
 .../devicetree/bindings/arm/omap/prcm.txt          |    7 --
 arch/arm/boot/dts/omap4.dtsi                       |   81 +++++++++++++-------
 3 files changed, 132 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/ctrl.txt

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
new file mode 100644
index 0000000..8f2b481
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -0,0 +1,77 @@
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-scrm"
+		"ti,am4-scrm"
+		"ti,dm814-scrm"
+		"ti,dm816-scrm"
+		"ti,omap2-scrm"
+		"ti,omap3-scrm"
+		"ti,omap3-scrm-wkup"
+		"ti,omap4-ctrl"
+		"ti,omap4-ctrl-wkup"
+- reg:		Contains Control Module register address range
+		(base address and length)
+
+Optional properties:
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Examples:
+
+scrm: scrm at 48002000 {
+	compatible = "ti,omap3-scrm", "simple-bus";
+	reg = <0x48002000 0x2000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x48002000 0x2000>;
+
+	omap3_pmx_core: pinmux at 30 {
+		compatible = "ti,omap3-padconf",
+			     "pinctrl-single";
+		reg = <0x30 0x230>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		pinctrl-single,register-width = <16>;
+		pinctrl-single,function-mask = <0xff1f>;
+	};
+
+	scm_conf: scm_conf at 270 {
+		compatible = "syscon";
+		reg = <0x270 0x330>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scrm_clocks: clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	scrm_clockdomains: clockdomains {
+	};
+}
+
+&scrm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 98ab498..3eb6d7a 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -10,15 +10,10 @@ documentation about the individual clock/clockdomain nodes.
 Required properties:
 - compatible:	Must be one of:
 		"ti,am3-prcm"
-		"ti,am3-scrm"
 		"ti,am4-prcm"
-		"ti,am4-scrm"
 		"ti,omap2-prcm"
-		"ti,omap2-scrm"
 		"ti,omap3-prm"
 		"ti,omap3-cm"
-		"ti,omap3-scrm"
-		"ti,omap3-scrm-wkup"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
@@ -31,9 +26,7 @@ Required properties:
 		"ti,dra7-cm-core-aon"
 		"ti,dra7-cm-core"
 		"ti,dm814-prcm"
-		"ti,dm814-scrm"
 		"ti,dm816-prcm"
-		"ti,dm816-scrm"
 - reg:		Contains PRCM module register address range
 		(base address and length)
 - clocks:	clocks for this module
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 074147c..dec7f57 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -167,36 +167,65 @@
 			};
 		};
 
-		counter32k: counter at 4a304000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4a304000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
+		scm: scm at 4a002000 {
+			compatible = "ti,omap4-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1000>,
+			      <0x4a100000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1000>,
+				 <1 0 0x4a100000 0x1000>;
 
-		omap4_pmx_core: pinmux at 4a100040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a100040 0x0196>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+			scm_conf: scm_conf at 0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			omap4_pmx_core: pinmux at 1,40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0196>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap4_padconf_global: omap4_padconf_global at 1,5a0 {
+				compatible = "syscon";
+				reg = <1 0x5a0 0x170>;
+			};
 		};
-		omap4_pmx_wkup: pinmux at 4a31e040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a31e040 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+
+		scm_wkup: scm_wkup at 4a30a000 {
+			compatible = "ti,omap4-ctrl-wkup", "simple-bus";
+			reg = <0x4a30a000 0x1000>, <0x4a31e000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a30a000 0x1000>,
+				 <1 0 0x4a31e000 0x1000>;
+
+			omap4_pmx_wkup: pinmux at 1,40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
 		};
 
-		omap4_padconf_global: tisyscon at 4a1005a0 {
-			compatible = "syscon";
-			reg = <0x4a1005a0 0x170>;
+		counter32k: counter at 4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
-- 
1.7.9.5

Re: [PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -167,36 +167,65 @@
> +		scm: scm@4a002000 {
> +			compatible = "ti,omap4-ctrl", "simple-bus";
> +			reg = <0x4a002000 0x1000>,
> +			      <0x4a100000 0x1000>;
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			ranges = <0 0 0x4a002000 0x1000>,
> +				 <1 0 0x4a100000 0x1000>;

Oops I still have a bit of an issue with this, sorry I should have
been more clear last time.

Now it's hard to figure out which children belong to l4_cfg and which
ones to l4_wkup. I suggest we set them up as completely separate blocks
as that's what they are.

Below is an example of what I think things should look like for omap4,
maybe take a look at that and see if that makes sense for you?

It may need to be patched in separate parts to keep the patches readable
though :)

Regards,

Tony


	ocp {
		...

		l4_cfg: l4@4a000000 {
			compatible = "ti,omap4-l4-cfg", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a000000 0x1000000>;

			cm1: cm1@4000 {
				compatible = "ti,omap4-cm1";
				reg = <0x4000 0x2000>;

				cm1_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm1_clockdomains: clockdomains {
				};
			};

			cm2: cm2@8000 {
				compatible = "ti,omap4-cm2";
				reg = <0x8000 0x3000>;

				cm2_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm2_clockdomains: clockdomains {
				};
			};

			omap4_pmx_core: pinmux@100040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x100040 0x0196>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};

			omap4_padconf_global: tisyscon@1005a0 {
				compatible = "syscon";
				reg = <0x1005a0 0x170>;
				#address-cells = <1>;
				#size-cells = <1>;

				pbias_regulator: pbias_regulator {
					compatible = "ti,pbias-omap";
					reg = <0x60 0x4>;
					syscon = <&omap4_padconf_global>;
					pbias_mmc_reg: pbias_mmc_omap4 {
						regulator-name = "pbias_mmc_omap4";
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <3000000>;
					};
				};
			};
		};

		l4_wkup: l4@4a300000 {
			compatible = "ti,omap4-l4-wkup", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a300000 0x40000>;

			counter32k: counter@4000 {
				compatible = "ti,omap-counter32k";
				reg = <0x4000 0x20>;
				ti,hwmods = "counter_32k";
			};

			prm: prm@6000 {
				compatible = "ti,omap4-prm";
				reg = <0x6000 0x3000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

				prm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				prm_clockdomains: clockdomains {
				};
			};

			scrm: scrm@a000 {
				compatible = "ti,omap4-scrm";
				reg = <0xa000 0x2000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0xa000 0x2000>;

				scrm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				scrm_clockdomains: clockdomains {
				};
			};

			omap4_pmx_wkup: pinmux@1e040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x1e040 0x0038>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};
		};
		...
	};

[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -167,36 +167,65 @@
> +		scm: scm at 4a002000 {
> +			compatible = "ti,omap4-ctrl", "simple-bus";
> +			reg = <0x4a002000 0x1000>,
> +			      <0x4a100000 0x1000>;
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			ranges = <0 0 0x4a002000 0x1000>,
> +				 <1 0 0x4a100000 0x1000>;

Oops I still have a bit of an issue with this, sorry I should have
been more clear last time.

Now it's hard to figure out which children belong to l4_cfg and which
ones to l4_wkup. I suggest we set them up as completely separate blocks
as that's what they are.

Below is an example of what I think things should look like for omap4,
maybe take a look at that and see if that makes sense for you?

It may need to be patched in separate parts to keep the patches readable
though :)

Regards,

Tony


	ocp {
		...

		l4_cfg: l4 at 4a000000 {
			compatible = "ti,omap4-l4-cfg", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a000000 0x1000000>;

			cm1: cm1 at 4000 {
				compatible = "ti,omap4-cm1";
				reg = <0x4000 0x2000>;

				cm1_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm1_clockdomains: clockdomains {
				};
			};

			cm2: cm2 at 8000 {
				compatible = "ti,omap4-cm2";
				reg = <0x8000 0x3000>;

				cm2_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm2_clockdomains: clockdomains {
				};
			};

			omap4_pmx_core: pinmux at 100040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x100040 0x0196>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};

			omap4_padconf_global: tisyscon at 1005a0 {
				compatible = "syscon";
				reg = <0x1005a0 0x170>;
				#address-cells = <1>;
				#size-cells = <1>;

				pbias_regulator: pbias_regulator {
					compatible = "ti,pbias-omap";
					reg = <0x60 0x4>;
					syscon = <&omap4_padconf_global>;
					pbias_mmc_reg: pbias_mmc_omap4 {
						regulator-name = "pbias_mmc_omap4";
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <3000000>;
					};
				};
			};
		};

		l4_wkup: l4 at 4a300000 {
			compatible = "ti,omap4-l4-wkup", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a300000 0x40000>;

			counter32k: counter at 4000 {
				compatible = "ti,omap-counter32k";
				reg = <0x4000 0x20>;
				ti,hwmods = "counter_32k";
			};

			prm: prm at 6000 {
				compatible = "ti,omap4-prm";
				reg = <0x6000 0x3000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

				prm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				prm_clockdomains: clockdomains {
				};
			};

			scrm: scrm at a000 {
				compatible = "ti,omap4-scrm";
				reg = <0xa000 0x2000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0xa000 0x2000>;

				scrm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				scrm_clockdomains: clockdomains {
				};
			};

			omap4_pmx_wkup: pinmux at 1e040 {
				compatible = "ti,omap4-padconf", "pinctrl-single";
				reg = <0x1e040 0x0038>;
				#address-cells = <1>;
				#size-cells = <0>;
				#interrupt-cells = <1>;
				interrupt-controller;
				pinctrl-single,register-width = <16>;
				pinctrl-single,function-mask = <0x7fff>;
			};
		};
		...
	};

Re: [PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [150318 14:35]:
> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> > --- a/arch/arm/boot/dts/omap4.dtsi
> > +++ b/arch/arm/boot/dts/omap4.dtsi
> > @@ -167,36 +167,65 @@
> > +		scm: scm@4a002000 {
> > +			compatible = "ti,omap4-ctrl", "simple-bus";
> > +			reg = <0x4a002000 0x1000>,
> > +			      <0x4a100000 0x1000>;
> > +			#address-cells = <2>;
> > +			#size-cells = <1>;
> > +			ranges = <0 0 0x4a002000 0x1000>,
> > +				 <1 0 0x4a100000 0x1000>;
> 
> Oops I still have a bit of an issue with this, sorry I should have
> been more clear last time.
> 
> Now it's hard to figure out which children belong to l4_cfg and which
> ones to l4_wkup. I suggest we set them up as completely separate blocks
> as that's what they are.
> 
> Below is an example of what I think things should look like for omap4,
> maybe take a look at that and see if that makes sense for you?
> 
> It may need to be patched in separate parts to keep the patches readable
> though :)

The example I posted has some l4_cfg vs SCM confusion as pointed out by
Tero while we chatted about it. Also l4_wkup is a child of l4_cfg on
omap4, while on omap5 they are separate.

Below are some examples of what we came up with that now follows omap4460
TRM "Figure 2-1. Interconnect Overview" and "Table 2-3. L4_CFG Memory
Space Mapping". Also an example for omap3 is included.

Tero, maybe just do the minimal changes for now as we don't need to move
all of it at once?

Regards,

Tony


Example for omap4.dtsi, which ocp being the l3 interconnect:

	ocp {
		compatible = "ti,omap4-l3-noc", "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
		reg = <0x44000000 0x1000>,
		      <0x44800000 0x2000>,
		      <0x45000000 0x1000>;
		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;

		l4_cfg: l4@4a000000 {
			compatible = "ti,omap4-l4-cfg", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a000000 0x1000000>;

			cm1: cm1@4000 {
				compatible = "ti,omap4-cm1";
				reg = <0x4000 0x2000>;

				cm1_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm1_clockdomains: clockdomains {
				};
			};

			cm2: cm2@8000 {
				compatible = "ti,omap4-cm2";
				reg = <0x8000 0x3000>;

				cm2_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm2_clockdomains: clockdomains {
				};
			};

			omap4_scm_core: scm@100000 {
				compatible = "ti,omap4-scm-core", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x100000 0x1000>;

				omap4_pmx_core: pinmux@40 {
					compatible = "ti,omap4-padconf", "pinctrl-single";
					reg = <0x40 0x0196>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0x7fff>;
				};

				omap4_padconf_global: tisyscon@5a0 {
					compatible = "syscon";
					reg = <0x5a0 0x170>;
					#address-cells = <1>;
					#size-cells = <1>;

					pbias_regulator: pbias_regulator {
						compatible = "ti,pbias-omap";
						reg = <0x60 0x4>;
						syscon = <&omap4_padconf_global>;
						pbias_mmc_reg: pbias_mmc_omap4 {
							regulator-name = "pbias_mmc_omap4";
							regulator-min-microvolt = <1800000>;
							regulator-max-microvolt = <3000000>;
						};
					};
				};
			};

			l4_wkup: l4@300000 {
				compatible = "ti,omap4-l4-wkup", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x300000 0x40000>;

				counter32k: counter@4000 {
					compatible = "ti,omap-counter32k";
					reg = <0x4000 0x20>;
					ti,hwmods = "counter_32k";
				};

				prm: prm@6000 {
					compatible = "ti,omap4-prm";
					reg = <0x6000 0x3000>;
					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

					prm_clocks: clocks {
						#address-cells = <1>;
						#size-cells = <0>;
					};

					prm_clockdomains: clockdomains {
					};
				};

				scrm: scrm@a000 {
					compatible = "ti,omap4-scrm";
					reg = <0xa000 0x2000>;
					#address-cells = <1>;
					#size-cells = <1>;
					ranges = <0 0xa000 0x2000>;

					scrm_clocks: clocks {
						#address-cells = <1>;
						#size-cells = <0>;
					};

					scrm_clockdomains: clockdomains {
					};
				};

				omap4_pmx_wkup: pinmux@1e040 {
					compatible = "ti,omap4-padconf", "pinctrl-single";
					reg = <0x1e040 0x0038>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0x7fff>;
				};
			};
		};
	...
	};


Example for omap3.dtsi with ocp being the l3 interconnect:

	ocp {
		compatible = "ti,omap3-l3-smx", "simple-bus";
		reg = <0x68000000 0x10000>;
		interrupts = <9 10>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		ti,hwmods = "l3_main";

		...

		l4_core: l4@48000000 {
			compatible = "ti,omap3-l4-core", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x48000000 0x1000000>;

			scrm: scrm@48002000 {
				compatible = "ti,omap3-scrm", "simple-bus";
				reg = <0x2000 0x2000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x2000 0x2000>;

				omap3_pmx_core: pinmux@30 {
					compatible = "ti,omap3-padconf", "pinctrl-single";
					reg = <0x30 0x0238>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0xff1f>;
				};

				scm_conf: tisyscon@270 {
					compatible = "syscon";
					reg = <0x270 0x2f0>;
					#address-cells = <1>;
					#size-cells = <1>;

					pbias_regulator: pbias_regulator {
						compatible = "ti,pbias-omap";
						reg = <0x2b0 0x4>;
						syscon = <&scm_conf>;
						pbias_mmc_reg: pbias_mmc_omap2430 {
							regulator-name = "pbias_mmc_omap2430";
							regulator-min-microvolt = <1800000>;
							regulator-max-microvolt = <3000000>;
						};
					};
				};

				omap3_pmx_wkup: pinmux@a00 {
					compatible = "ti,omap3-padconf", "pinctrl-single";
					reg = <0xa00 0x5c>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0xff1f>;
				};

				scrm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				scrm_clockdomains: clockdomains {
				};
			};
		};
		...
	};

[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [150318 14:35]:
> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> > --- a/arch/arm/boot/dts/omap4.dtsi
> > +++ b/arch/arm/boot/dts/omap4.dtsi
> > @@ -167,36 +167,65 @@
> > +		scm: scm at 4a002000 {
> > +			compatible = "ti,omap4-ctrl", "simple-bus";
> > +			reg = <0x4a002000 0x1000>,
> > +			      <0x4a100000 0x1000>;
> > +			#address-cells = <2>;
> > +			#size-cells = <1>;
> > +			ranges = <0 0 0x4a002000 0x1000>,
> > +				 <1 0 0x4a100000 0x1000>;
> 
> Oops I still have a bit of an issue with this, sorry I should have
> been more clear last time.
> 
> Now it's hard to figure out which children belong to l4_cfg and which
> ones to l4_wkup. I suggest we set them up as completely separate blocks
> as that's what they are.
> 
> Below is an example of what I think things should look like for omap4,
> maybe take a look at that and see if that makes sense for you?
> 
> It may need to be patched in separate parts to keep the patches readable
> though :)

The example I posted has some l4_cfg vs SCM confusion as pointed out by
Tero while we chatted about it. Also l4_wkup is a child of l4_cfg on
omap4, while on omap5 they are separate.

Below are some examples of what we came up with that now follows omap4460
TRM "Figure 2-1. Interconnect Overview" and "Table 2-3. L4_CFG Memory
Space Mapping". Also an example for omap3 is included.

Tero, maybe just do the minimal changes for now as we don't need to move
all of it at once?

Regards,

Tony


Example for omap4.dtsi, which ocp being the l3 interconnect:

	ocp {
		compatible = "ti,omap4-l3-noc", "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
		reg = <0x44000000 0x1000>,
		      <0x44800000 0x2000>,
		      <0x45000000 0x1000>;
		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;

		l4_cfg: l4 at 4a000000 {
			compatible = "ti,omap4-l4-cfg", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x4a000000 0x1000000>;

			cm1: cm1 at 4000 {
				compatible = "ti,omap4-cm1";
				reg = <0x4000 0x2000>;

				cm1_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm1_clockdomains: clockdomains {
				};
			};

			cm2: cm2 at 8000 {
				compatible = "ti,omap4-cm2";
				reg = <0x8000 0x3000>;

				cm2_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				cm2_clockdomains: clockdomains {
				};
			};

			omap4_scm_core: scm at 100000 {
				compatible = "ti,omap4-scm-core", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x100000 0x1000>;

				omap4_pmx_core: pinmux at 40 {
					compatible = "ti,omap4-padconf", "pinctrl-single";
					reg = <0x40 0x0196>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0x7fff>;
				};

				omap4_padconf_global: tisyscon at 5a0 {
					compatible = "syscon";
					reg = <0x5a0 0x170>;
					#address-cells = <1>;
					#size-cells = <1>;

					pbias_regulator: pbias_regulator {
						compatible = "ti,pbias-omap";
						reg = <0x60 0x4>;
						syscon = <&omap4_padconf_global>;
						pbias_mmc_reg: pbias_mmc_omap4 {
							regulator-name = "pbias_mmc_omap4";
							regulator-min-microvolt = <1800000>;
							regulator-max-microvolt = <3000000>;
						};
					};
				};
			};

			l4_wkup: l4 at 300000 {
				compatible = "ti,omap4-l4-wkup", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x300000 0x40000>;

				counter32k: counter at 4000 {
					compatible = "ti,omap-counter32k";
					reg = <0x4000 0x20>;
					ti,hwmods = "counter_32k";
				};

				prm: prm at 6000 {
					compatible = "ti,omap4-prm";
					reg = <0x6000 0x3000>;
					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

					prm_clocks: clocks {
						#address-cells = <1>;
						#size-cells = <0>;
					};

					prm_clockdomains: clockdomains {
					};
				};

				scrm: scrm at a000 {
					compatible = "ti,omap4-scrm";
					reg = <0xa000 0x2000>;
					#address-cells = <1>;
					#size-cells = <1>;
					ranges = <0 0xa000 0x2000>;

					scrm_clocks: clocks {
						#address-cells = <1>;
						#size-cells = <0>;
					};

					scrm_clockdomains: clockdomains {
					};
				};

				omap4_pmx_wkup: pinmux at 1e040 {
					compatible = "ti,omap4-padconf", "pinctrl-single";
					reg = <0x1e040 0x0038>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0x7fff>;
				};
			};
		};
	...
	};


Example for omap3.dtsi with ocp being the l3 interconnect:

	ocp {
		compatible = "ti,omap3-l3-smx", "simple-bus";
		reg = <0x68000000 0x10000>;
		interrupts = <9 10>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		ti,hwmods = "l3_main";

		...

		l4_core: l4 at 48000000 {
			compatible = "ti,omap3-l4-core", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x48000000 0x1000000>;

			scrm: scrm at 48002000 {
				compatible = "ti,omap3-scrm", "simple-bus";
				reg = <0x2000 0x2000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x2000 0x2000>;

				omap3_pmx_core: pinmux at 30 {
					compatible = "ti,omap3-padconf", "pinctrl-single";
					reg = <0x30 0x0238>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0xff1f>;
				};

				scm_conf: tisyscon at 270 {
					compatible = "syscon";
					reg = <0x270 0x2f0>;
					#address-cells = <1>;
					#size-cells = <1>;

					pbias_regulator: pbias_regulator {
						compatible = "ti,pbias-omap";
						reg = <0x2b0 0x4>;
						syscon = <&scm_conf>;
						pbias_mmc_reg: pbias_mmc_omap2430 {
							regulator-name = "pbias_mmc_omap2430";
							regulator-min-microvolt = <1800000>;
							regulator-max-microvolt = <3000000>;
						};
					};
				};

				omap3_pmx_wkup: pinmux at a00 {
					compatible = "ti,omap3-padconf", "pinctrl-single";
					reg = <0xa00 0x5c>;
					#address-cells = <1>;
					#size-cells = <0>;
					#interrupt-cells = <1>;
					interrupt-controller;
					pinctrl-single,register-width = <16>;
					pinctrl-single,function-mask = <0xff1f>;
				};

				scrm_clocks: clocks {
					#address-cells = <1>;
					#size-cells = <0>;
				};

				scrm_clockdomains: clockdomains {
				};
			};
		};
		...
	};

Re: [PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tero Kristo]

On 03/19/2015 10:25 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [150318 14:35]:
>> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
>>> --- a/arch/arm/boot/dts/omap4.dtsi
>>> +++ b/arch/arm/boot/dts/omap4.dtsi
>>> @@ -167,36 +167,65 @@
>>> +		scm: scm@4a002000 {
>>> +			compatible = "ti,omap4-ctrl", "simple-bus";
>>> +			reg = <0x4a002000 0x1000>,
>>> +			      <0x4a100000 0x1000>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <1>;
>>> +			ranges = <0 0 0x4a002000 0x1000>,
>>> +				 <1 0 0x4a100000 0x1000>;
>>
>> Oops I still have a bit of an issue with this, sorry I should have
>> been more clear last time.
>>
>> Now it's hard to figure out which children belong to l4_cfg and which
>> ones to l4_wkup. I suggest we set them up as completely separate blocks
>> as that's what they are.
>>
>> Below is an example of what I think things should look like for omap4,
>> maybe take a look at that and see if that makes sense for you?
>>
>> It may need to be patched in separate parts to keep the patches readable
>> though :)
>
> The example I posted has some l4_cfg vs SCM confusion as pointed out by
> Tero while we chatted about it. Also l4_wkup is a child of l4_cfg on
> omap4, while on omap5 they are separate.
>
> Below are some examples of what we came up with that now follows omap4460
> TRM "Figure 2-1. Interconnect Overview" and "Table 2-3. L4_CFG Memory
> Space Mapping". Also an example for omap3 is included.
>
> Tero, maybe just do the minimal changes for now as we don't need to move
> all of it at once?

Yes, I will be looking at this today.

-Tero

>
> Regards,
>
> Tony
>
>
> Example for omap4.dtsi, which ocp being the l3 interconnect:
>
> 	ocp {
> 		compatible = "ti,omap4-l3-noc", "simple-bus";
> 		#address-cells = <1>;
> 		#size-cells = <1>;
> 		ranges;
> 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
> 		reg = <0x44000000 0x1000>,
> 		      <0x44800000 0x2000>,
> 		      <0x45000000 0x1000>;
> 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>
> 		l4_cfg: l4@4a000000 {
> 			compatible = "ti,omap4-l4-cfg", "simple-bus";
> 			#address-cells = <1>;
> 			#size-cells = <1>;
> 			ranges = <0 0x4a000000 0x1000000>;
>
> 			cm1: cm1@4000 {
> 				compatible = "ti,omap4-cm1";
> 				reg = <0x4000 0x2000>;
>
> 				cm1_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				cm1_clockdomains: clockdomains {
> 				};
> 			};
>
> 			cm2: cm2@8000 {
> 				compatible = "ti,omap4-cm2";
> 				reg = <0x8000 0x3000>;
>
> 				cm2_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				cm2_clockdomains: clockdomains {
> 				};
> 			};
>
> 			omap4_scm_core: scm@100000 {
> 				compatible = "ti,omap4-scm-core", "simple-bus";
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x100000 0x1000>;
>
> 				omap4_pmx_core: pinmux@40 {
> 					compatible = "ti,omap4-padconf", "pinctrl-single";
> 					reg = <0x40 0x0196>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0x7fff>;
> 				};
>
> 				omap4_padconf_global: tisyscon@5a0 {
> 					compatible = "syscon";
> 					reg = <0x5a0 0x170>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
>
> 					pbias_regulator: pbias_regulator {
> 						compatible = "ti,pbias-omap";
> 						reg = <0x60 0x4>;
> 						syscon = <&omap4_padconf_global>;
> 						pbias_mmc_reg: pbias_mmc_omap4 {
> 							regulator-name = "pbias_mmc_omap4";
> 							regulator-min-microvolt = <1800000>;
> 							regulator-max-microvolt = <3000000>;
> 						};
> 					};
> 				};
> 			};
>
> 			l4_wkup: l4@300000 {
> 				compatible = "ti,omap4-l4-wkup", "simple-bus";
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x300000 0x40000>;
>
> 				counter32k: counter@4000 {
> 					compatible = "ti,omap-counter32k";
> 					reg = <0x4000 0x20>;
> 					ti,hwmods = "counter_32k";
> 				};
>
> 				prm: prm@6000 {
> 					compatible = "ti,omap4-prm";
> 					reg = <0x6000 0x3000>;
> 					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>
> 					prm_clocks: clocks {
> 						#address-cells = <1>;
> 						#size-cells = <0>;
> 					};
>
> 					prm_clockdomains: clockdomains {
> 					};
> 				};
>
> 				scrm: scrm@a000 {
> 					compatible = "ti,omap4-scrm";
> 					reg = <0xa000 0x2000>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
> 					ranges = <0 0xa000 0x2000>;
>
> 					scrm_clocks: clocks {
> 						#address-cells = <1>;
> 						#size-cells = <0>;
> 					};
>
> 					scrm_clockdomains: clockdomains {
> 					};
> 				};
>
> 				omap4_pmx_wkup: pinmux@1e040 {
> 					compatible = "ti,omap4-padconf", "pinctrl-single";
> 					reg = <0x1e040 0x0038>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0x7fff>;
> 				};
> 			};
> 		};
> 	...
> 	};
>
>
> Example for omap3.dtsi with ocp being the l3 interconnect:
>
> 	ocp {
> 		compatible = "ti,omap3-l3-smx", "simple-bus";
> 		reg = <0x68000000 0x10000>;
> 		interrupts = <9 10>;
> 		#address-cells = <1>;
> 		#size-cells = <1>;
> 		ranges;
> 		ti,hwmods = "l3_main";
>
> 		...
>
> 		l4_core: l4@48000000 {
> 			compatible = "ti,omap3-l4-core", "simple-bus";
> 			#address-cells = <1>;
> 			#size-cells = <1>;
> 			ranges = <0 0x48000000 0x1000000>;
>
> 			scrm: scrm@48002000 {
> 				compatible = "ti,omap3-scrm", "simple-bus";
> 				reg = <0x2000 0x2000>;
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x2000 0x2000>;
>
> 				omap3_pmx_core: pinmux@30 {
> 					compatible = "ti,omap3-padconf", "pinctrl-single";
> 					reg = <0x30 0x0238>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0xff1f>;
> 				};
>
> 				scm_conf: tisyscon@270 {
> 					compatible = "syscon";
> 					reg = <0x270 0x2f0>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
>
> 					pbias_regulator: pbias_regulator {
> 						compatible = "ti,pbias-omap";
> 						reg = <0x2b0 0x4>;
> 						syscon = <&scm_conf>;
> 						pbias_mmc_reg: pbias_mmc_omap2430 {
> 							regulator-name = "pbias_mmc_omap2430";
> 							regulator-min-microvolt = <1800000>;
> 							regulator-max-microvolt = <3000000>;
> 						};
> 					};
> 				};
>
> 				omap3_pmx_wkup: pinmux@a00 {
> 					compatible = "ti,omap3-padconf", "pinctrl-single";
> 					reg = <0xa00 0x5c>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0xff1f>;
> 				};
>
> 				scrm_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				scrm_clockdomains: clockdomains {
> 				};
> 			};
> 		};
> 		...
> 	};
>

[PATCHv4 30/35] ARM: dts: omap4: add system control module node

[Tero Kristo]

On 03/19/2015 10:25 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [150318 14:35]:
>> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
>>> --- a/arch/arm/boot/dts/omap4.dtsi
>>> +++ b/arch/arm/boot/dts/omap4.dtsi
>>> @@ -167,36 +167,65 @@
>>> +		scm: scm at 4a002000 {
>>> +			compatible = "ti,omap4-ctrl", "simple-bus";
>>> +			reg = <0x4a002000 0x1000>,
>>> +			      <0x4a100000 0x1000>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <1>;
>>> +			ranges = <0 0 0x4a002000 0x1000>,
>>> +				 <1 0 0x4a100000 0x1000>;
>>
>> Oops I still have a bit of an issue with this, sorry I should have
>> been more clear last time.
>>
>> Now it's hard to figure out which children belong to l4_cfg and which
>> ones to l4_wkup. I suggest we set them up as completely separate blocks
>> as that's what they are.
>>
>> Below is an example of what I think things should look like for omap4,
>> maybe take a look at that and see if that makes sense for you?
>>
>> It may need to be patched in separate parts to keep the patches readable
>> though :)
>
> The example I posted has some l4_cfg vs SCM confusion as pointed out by
> Tero while we chatted about it. Also l4_wkup is a child of l4_cfg on
> omap4, while on omap5 they are separate.
>
> Below are some examples of what we came up with that now follows omap4460
> TRM "Figure 2-1. Interconnect Overview" and "Table 2-3. L4_CFG Memory
> Space Mapping". Also an example for omap3 is included.
>
> Tero, maybe just do the minimal changes for now as we don't need to move
> all of it at once?

Yes, I will be looking at this today.

-Tero

>
> Regards,
>
> Tony
>
>
> Example for omap4.dtsi, which ocp being the l3 interconnect:
>
> 	ocp {
> 		compatible = "ti,omap4-l3-noc", "simple-bus";
> 		#address-cells = <1>;
> 		#size-cells = <1>;
> 		ranges;
> 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
> 		reg = <0x44000000 0x1000>,
> 		      <0x44800000 0x2000>,
> 		      <0x45000000 0x1000>;
> 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>
> 		l4_cfg: l4 at 4a000000 {
> 			compatible = "ti,omap4-l4-cfg", "simple-bus";
> 			#address-cells = <1>;
> 			#size-cells = <1>;
> 			ranges = <0 0x4a000000 0x1000000>;
>
> 			cm1: cm1 at 4000 {
> 				compatible = "ti,omap4-cm1";
> 				reg = <0x4000 0x2000>;
>
> 				cm1_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				cm1_clockdomains: clockdomains {
> 				};
> 			};
>
> 			cm2: cm2 at 8000 {
> 				compatible = "ti,omap4-cm2";
> 				reg = <0x8000 0x3000>;
>
> 				cm2_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				cm2_clockdomains: clockdomains {
> 				};
> 			};
>
> 			omap4_scm_core: scm at 100000 {
> 				compatible = "ti,omap4-scm-core", "simple-bus";
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x100000 0x1000>;
>
> 				omap4_pmx_core: pinmux at 40 {
> 					compatible = "ti,omap4-padconf", "pinctrl-single";
> 					reg = <0x40 0x0196>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0x7fff>;
> 				};
>
> 				omap4_padconf_global: tisyscon at 5a0 {
> 					compatible = "syscon";
> 					reg = <0x5a0 0x170>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
>
> 					pbias_regulator: pbias_regulator {
> 						compatible = "ti,pbias-omap";
> 						reg = <0x60 0x4>;
> 						syscon = <&omap4_padconf_global>;
> 						pbias_mmc_reg: pbias_mmc_omap4 {
> 							regulator-name = "pbias_mmc_omap4";
> 							regulator-min-microvolt = <1800000>;
> 							regulator-max-microvolt = <3000000>;
> 						};
> 					};
> 				};
> 			};
>
> 			l4_wkup: l4 at 300000 {
> 				compatible = "ti,omap4-l4-wkup", "simple-bus";
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x300000 0x40000>;
>
> 				counter32k: counter at 4000 {
> 					compatible = "ti,omap-counter32k";
> 					reg = <0x4000 0x20>;
> 					ti,hwmods = "counter_32k";
> 				};
>
> 				prm: prm at 6000 {
> 					compatible = "ti,omap4-prm";
> 					reg = <0x6000 0x3000>;
> 					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>
> 					prm_clocks: clocks {
> 						#address-cells = <1>;
> 						#size-cells = <0>;
> 					};
>
> 					prm_clockdomains: clockdomains {
> 					};
> 				};
>
> 				scrm: scrm at a000 {
> 					compatible = "ti,omap4-scrm";
> 					reg = <0xa000 0x2000>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
> 					ranges = <0 0xa000 0x2000>;
>
> 					scrm_clocks: clocks {
> 						#address-cells = <1>;
> 						#size-cells = <0>;
> 					};
>
> 					scrm_clockdomains: clockdomains {
> 					};
> 				};
>
> 				omap4_pmx_wkup: pinmux at 1e040 {
> 					compatible = "ti,omap4-padconf", "pinctrl-single";
> 					reg = <0x1e040 0x0038>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0x7fff>;
> 				};
> 			};
> 		};
> 	...
> 	};
>
>
> Example for omap3.dtsi with ocp being the l3 interconnect:
>
> 	ocp {
> 		compatible = "ti,omap3-l3-smx", "simple-bus";
> 		reg = <0x68000000 0x10000>;
> 		interrupts = <9 10>;
> 		#address-cells = <1>;
> 		#size-cells = <1>;
> 		ranges;
> 		ti,hwmods = "l3_main";
>
> 		...
>
> 		l4_core: l4 at 48000000 {
> 			compatible = "ti,omap3-l4-core", "simple-bus";
> 			#address-cells = <1>;
> 			#size-cells = <1>;
> 			ranges = <0 0x48000000 0x1000000>;
>
> 			scrm: scrm at 48002000 {
> 				compatible = "ti,omap3-scrm", "simple-bus";
> 				reg = <0x2000 0x2000>;
> 				#address-cells = <1>;
> 				#size-cells = <1>;
> 				ranges = <0 0x2000 0x2000>;
>
> 				omap3_pmx_core: pinmux at 30 {
> 					compatible = "ti,omap3-padconf", "pinctrl-single";
> 					reg = <0x30 0x0238>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0xff1f>;
> 				};
>
> 				scm_conf: tisyscon at 270 {
> 					compatible = "syscon";
> 					reg = <0x270 0x2f0>;
> 					#address-cells = <1>;
> 					#size-cells = <1>;
>
> 					pbias_regulator: pbias_regulator {
> 						compatible = "ti,pbias-omap";
> 						reg = <0x2b0 0x4>;
> 						syscon = <&scm_conf>;
> 						pbias_mmc_reg: pbias_mmc_omap2430 {
> 							regulator-name = "pbias_mmc_omap2430";
> 							regulator-min-microvolt = <1800000>;
> 							regulator-max-microvolt = <3000000>;
> 						};
> 					};
> 				};
>
> 				omap3_pmx_wkup: pinmux at a00 {
> 					compatible = "ti,omap3-padconf", "pinctrl-single";
> 					reg = <0xa00 0x5c>;
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 					#interrupt-cells = <1>;
> 					interrupt-controller;
> 					pinctrl-single,register-width = <16>;
> 					pinctrl-single,function-mask = <0xff1f>;
> 				};
>
> 				scrm_clocks: clocks {
> 					#address-cells = <1>;
> 					#size-cells = <0>;
> 				};
>
> 				scrm_clockdomains: clockdomains {
> 				};
> 			};
> 		};
> 		...
> 	};
>

[PATCHv4 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing

[Tero Kristo]

The legacy control module APIs will be gone, thus convert the display
driver to use syscon. This change should eventually be moved to
display driver from the board directory.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/display.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 7a050f9..f492ae1 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -26,6 +26,8 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -104,6 +106,10 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+#define OMAP4_DSIPHY_SYSCON_OFFSET		0x78
+
+static struct regmap *omap4_dsi_mux_syscon;
+
 static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
@@ -124,7 +130,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 		return -ENODEV;
 	}
 
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+	regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, &reg);
 
 	reg &= ~enable_mask;
 	reg &= ~pipd_mask;
@@ -132,7 +138,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	reg |= (lanes << enable_shift) & enable_mask;
 	reg |= (lanes << pipd_shift) & pipd_mask;
 
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+	regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg);
 
 	return 0;
 }
@@ -665,5 +671,10 @@ int __init omapdss_init_of(void)
 		return r;
 	}
 
+	/* add DSI info for omap4 */
+	node = of_find_node_by_name(NULL, "omap4_padconf_global");
+	if (node)
+		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+
 	return 0;
 }
-- 
1.7.9.5

[PATCHv4 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing

[Tero Kristo]

The legacy control module APIs will be gone, thus convert the display
driver to use syscon. This change should eventually be moved to
display driver from the board directory.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/display.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 7a050f9..f492ae1 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -26,6 +26,8 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -104,6 +106,10 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+#define OMAP4_DSIPHY_SYSCON_OFFSET		0x78
+
+static struct regmap *omap4_dsi_mux_syscon;
+
 static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
@@ -124,7 +130,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 		return -ENODEV;
 	}
 
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+	regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, &reg);
 
 	reg &= ~enable_mask;
 	reg &= ~pipd_mask;
@@ -132,7 +138,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	reg |= (lanes << enable_shift) & enable_mask;
 	reg |= (lanes << pipd_shift) & pipd_mask;
 
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+	regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg);
 
 	return 0;
 }
@@ -665,5 +671,10 @@ int __init omapdss_init_of(void)
 		return r;
 	}
 
+	/* add DSI info for omap4 */
+	node = of_find_node_by_name(NULL, "omap4_padconf_global");
+	if (node)
+		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+
 	return 0;
 }
-- 
1.7.9.5

[PATCHv4 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write

[Tero Kristo]

omap4_ctrl_pad_readl/writel are no longer used by anybody, so remove
these. Syscon / pinctrl should be used to access the padconf area
instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |   24 +-----------------------
 arch/arm/mach-omap2/control.h |    5 +----
 arch/arm/mach-omap2/io.c      |   11 ++++-------
 3 files changed, 6 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f756f21..9f96e60 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -36,7 +36,6 @@
 
 static void __iomem *omap2_ctrl_base;
 static s16 omap2_ctrl_offset;
-static void __iomem *omap4_ctrl_pad_base;
 static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@@ -139,13 +138,9 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-#define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
-
-void __init omap2_set_globals_control(void __iomem *ctrl,
-				      void __iomem *ctrl_pad)
+void __init omap2_set_globals_control(void __iomem *ctrl)
 {
 	omap2_ctrl_base = ctrl;
-	omap4_ctrl_pad_base = ctrl_pad;
 }
 
 u8 omap_ctrl_readb(u16 offset)
@@ -218,23 +213,6 @@ void omap_ctrl_writel(u32 val, u16 offset)
 			     val);
 }
 
-/*
- * On OMAP4 control pad are not addressable from control
- * core base. So the common omap_ctrl_read/write APIs breaks
- * Hence export separate APIs to manage the omap4 pad control
- * registers. This APIs will work only for OMAP4
- */
-
-u32 omap4_ctrl_pad_readl(u16 offset)
-{
-	return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
-void omap4_ctrl_pad_writel(u32 val, u16 offset)
-{
-	writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
 #ifdef CONFIG_ARCH_OMAP3
 
 /**
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 5353ff4..80d2b7d 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -443,11 +443,9 @@
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
 extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
 
 extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
@@ -465,8 +463,7 @@ extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-extern void omap2_set_globals_control(void __iomem *ctrl,
-				      void __iomem *ctrl_pad);
+void omap2_set_globals_control(void __iomem *ctrl);
 void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c3fa739..6c39cc0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -443,7 +443,7 @@ void __init omap3_init_early(void)
 	/* XXX: remove these once OMAP3 is DT only */
 	if (!of_have_populated_dt()) {
 		omap2_set_globals_control(
-			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), NULL);
+			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE));
 		omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
 		omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 				     NULL);
@@ -631,8 +631,7 @@ void __init omap4430_init_early(void)
 {
 	omap2_set_globals_tap(OMAP443X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -660,8 +659,7 @@ void __init omap5_init_early(void)
 {
 	omap2_set_globals_tap(OMAP54XX_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
@@ -686,8 +684,7 @@ void __init omap5_init_late(void)
 void __init dra7xx_init_early(void)
 {
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
-- 
1.7.9.5

[PATCHv4 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write

[Tero Kristo]

omap4_ctrl_pad_readl/writel are no longer used by anybody, so remove
these. Syscon / pinctrl should be used to access the padconf area
instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |   24 +-----------------------
 arch/arm/mach-omap2/control.h |    5 +----
 arch/arm/mach-omap2/io.c      |   11 ++++-------
 3 files changed, 6 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f756f21..9f96e60 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -36,7 +36,6 @@
 
 static void __iomem *omap2_ctrl_base;
 static s16 omap2_ctrl_offset;
-static void __iomem *omap4_ctrl_pad_base;
 static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@@ -139,13 +138,9 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-#define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
-
-void __init omap2_set_globals_control(void __iomem *ctrl,
-				      void __iomem *ctrl_pad)
+void __init omap2_set_globals_control(void __iomem *ctrl)
 {
 	omap2_ctrl_base = ctrl;
-	omap4_ctrl_pad_base = ctrl_pad;
 }
 
 u8 omap_ctrl_readb(u16 offset)
@@ -218,23 +213,6 @@ void omap_ctrl_writel(u32 val, u16 offset)
 			     val);
 }
 
-/*
- * On OMAP4 control pad are not addressable from control
- * core base. So the common omap_ctrl_read/write APIs breaks
- * Hence export separate APIs to manage the omap4 pad control
- * registers. This APIs will work only for OMAP4
- */
-
-u32 omap4_ctrl_pad_readl(u16 offset)
-{
-	return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
-void omap4_ctrl_pad_writel(u32 val, u16 offset)
-{
-	writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
 #ifdef CONFIG_ARCH_OMAP3
 
 /**
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 5353ff4..80d2b7d 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -443,11 +443,9 @@
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
 extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
 
 extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
@@ -465,8 +463,7 @@ extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-extern void omap2_set_globals_control(void __iomem *ctrl,
-				      void __iomem *ctrl_pad);
+void omap2_set_globals_control(void __iomem *ctrl);
 void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c3fa739..6c39cc0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -443,7 +443,7 @@ void __init omap3_init_early(void)
 	/* XXX: remove these once OMAP3 is DT only */
 	if (!of_have_populated_dt()) {
 		omap2_set_globals_control(
-			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), NULL);
+			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE));
 		omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
 		omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 				     NULL);
@@ -631,8 +631,7 @@ void __init omap4430_init_early(void)
 {
 	omap2_set_globals_tap(OMAP443X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
@@ -660,8 +659,7 @@ void __init omap5_init_early(void)
 {
 	omap2_set_globals_tap(OMAP54XX_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
@@ -686,8 +684,7 @@ void __init omap5_init_late(void)
 void __init dra7xx_init_early(void)
 {
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
-- 
1.7.9.5

[PATCHv4 33/35] ARM: dts: omap5: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    2 +
 arch/arm/boot/dts/omap5.dtsi                       |   82 +++++++++++++-------
 2 files changed, 58 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 8f2b481..e132026 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -22,6 +22,8 @@ Required properties:
 		"ti,omap3-scrm-wkup"
 		"ti,omap4-ctrl"
 		"ti,omap4-ctrl-wkup"
+		"ti,omap5-ctrl"
+		"ti,omap5-ctrl-wkup"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..ad665bb 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -182,36 +182,66 @@
 			};
 		};
 
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
+		scm: scm@4a002000 {
+			compatible = "ti,omap5-ctrl", "simple-bus";
+			reg = <0x4a002000 0x800>,
+			      <0x4a002800 0x800>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x800>,
+				 <1 0 0x4a002800 0x800>;
 
-		omap5_pmx_core: pinmux@4a002840 {
-			compatible = "ti,omap5-padconf", "pinctrl-single";
-			reg = <0x4a002840 0x01b6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+			scm_conf: scm_conf@0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			omap5_pmx_core: pinmux@1,40 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x01b6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap5_padconf_global: omap5_padconf_global@1,5a0 {
+				compatible = "syscon";
+				reg = <1 0x5a0 0xec>;
+			};
 		};
-		omap5_pmx_wkup: pinmux@4ae0c840 {
-			compatible = "ti,omap5-padconf", "pinctrl-single";
-			reg = <0x4ae0c840 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+
+		scm_wkup: scm_wkup@4ae0c000 {
+			compatible = "ti,omap5-ctrl-wkup", "simple-bus";
+			reg = <0x4ae0c000 0x800>,
+			      <0x4ae0c800 0x800>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4ae0c000 0x800>,
+				 <1 0 0x4ae0c800 0x800>;
+
+			omap5_pmx_wkup: pinmux@1,40 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
 		};
 
-		omap5_padconf_global: tisyscon@4a002da0 {
-			compatible = "syscon";
-			reg = <0x4A002da0 0xec>;
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
-- 
1.7.9.5

[PATCHv4 33/35] ARM: dts: omap5: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    2 +
 arch/arm/boot/dts/omap5.dtsi                       |   82 +++++++++++++-------
 2 files changed, 58 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 8f2b481..e132026 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -22,6 +22,8 @@ Required properties:
 		"ti,omap3-scrm-wkup"
 		"ti,omap4-ctrl"
 		"ti,omap4-ctrl-wkup"
+		"ti,omap5-ctrl"
+		"ti,omap5-ctrl-wkup"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b321fdf..ad665bb 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -182,36 +182,66 @@
 			};
 		};
 
-		counter32k: counter at 4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
+		scm: scm at 4a002000 {
+			compatible = "ti,omap5-ctrl", "simple-bus";
+			reg = <0x4a002000 0x800>,
+			      <0x4a002800 0x800>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x800>,
+				 <1 0 0x4a002800 0x800>;
 
-		omap5_pmx_core: pinmux at 4a002840 {
-			compatible = "ti,omap5-padconf", "pinctrl-single";
-			reg = <0x4a002840 0x01b6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+			scm_conf: scm_conf at 0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			omap5_pmx_core: pinmux at 1,40 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x01b6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap5_padconf_global: omap5_padconf_global at 1,5a0 {
+				compatible = "syscon";
+				reg = <1 0x5a0 0xec>;
+			};
 		};
-		omap5_pmx_wkup: pinmux at 4ae0c840 {
-			compatible = "ti,omap5-padconf", "pinctrl-single";
-			reg = <0x4ae0c840 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
+
+		scm_wkup: scm_wkup at 4ae0c000 {
+			compatible = "ti,omap5-ctrl-wkup", "simple-bus";
+			reg = <0x4ae0c000 0x800>,
+			      <0x4ae0c800 0x800>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4ae0c000 0x800>,
+				 <1 0 0x4ae0c800 0x800>;
+
+			omap5_pmx_wkup: pinmux at 1,40 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <1 0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
 		};
 
-		omap5_padconf_global: tisyscon at 4a002da0 {
-			compatible = "syscon";
-			reg = <0x4A002da0 0xec>;
+		counter32k: counter at 4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
-- 
1.7.9.5

[PATCHv4 34/35] ARM: dts: dra7: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    2 +
 arch/arm/boot/dts/dra7.dtsi                        |   73 +++++++++++++-------
 2 files changed, 50 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index e132026..16915c2 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -24,6 +24,8 @@ Required properties:
 		"ti,omap4-ctrl-wkup"
 		"ti,omap5-ctrl"
 		"ti,omap5-ctrl-wkup"
+		"ti,dra7-ctrl"
+		"ti,dra7-ctrl-wkup"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..f294ad5 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -203,26 +203,60 @@
 			};
 		};
 
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
+		scm: scm@4a002000 {
+			compatible = "ti,dra7-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1400>,
+			      <0x4a003400 0x600>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1400>,
+				 <1 0 0x4a003400 0x600>;
+
+			scm_conf: scm_conf@0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x1400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			dra7_pmx_core: pinmux@1,0 {
+				compatible = "ti,dra7-padconf",
+					     "pinctrl-single";
+				reg = <1 0x0 0x0464>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x3fffffff>;
+			};
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
+		scm_wkup: scm_wkup@4ae0c000 {
+			compatible = "ti,dra7-ctrl-wkup", "simple-bus";
+			reg = <0x4ae0c000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4ae0c000 0x600>;
+
+			scm_wkup_conf: scm_wkup_conf@0 {
+				compatible = "syscon";
+				reg = <0x0 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
 		};
 
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
+			reg = <0xe00 0x4>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap5 {
 				regulator-name = "pbias_mmc_omap5";
 				regulator-min-microvolt = <1800000>;
@@ -230,17 +264,6 @@
 			};
 		};
 
-		dra7_pmx_core: pinmux@4a003400 {
-			compatible = "ti,dra7-padconf", "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1410,7 +1433,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&dcan1_sys_clk_mux>;
 			status = "disabled";
@@ -1420,7 +1443,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			syscon-raminit = <&scm_conf 0x558 1>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sys_clkin1>;
 			status = "disabled";
-- 
1.7.9.5

[PATCHv4 34/35] ARM: dts: dra7: add system control module node

[Tero Kristo]

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    2 +
 arch/arm/boot/dts/dra7.dtsi                        |   73 +++++++++++++-------
 2 files changed, 50 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index e132026..16915c2 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -24,6 +24,8 @@ Required properties:
 		"ti,omap4-ctrl-wkup"
 		"ti,omap5-ctrl"
 		"ti,omap5-ctrl-wkup"
+		"ti,dra7-ctrl"
+		"ti,dra7-ctrl-wkup"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..f294ad5 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -203,26 +203,60 @@
 			};
 		};
 
-		counter32k: counter at 4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
+		scm: scm at 4a002000 {
+			compatible = "ti,dra7-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1400>,
+			      <0x4a003400 0x600>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1400>,
+				 <1 0 0x4a003400 0x600>;
+
+			scm_conf: scm_conf at 0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x1400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			dra7_pmx_core: pinmux at 1,0 {
+				compatible = "ti,dra7-padconf",
+					     "pinctrl-single";
+				reg = <1 0x0 0x0464>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x3fffffff>;
+			};
 		};
 
-		dra7_ctrl_core: ctrl_core at 4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
+		scm_wkup: scm_wkup at 4ae0c000 {
+			compatible = "ti,dra7-ctrl-wkup", "simple-bus";
+			reg = <0x4ae0c000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4ae0c000 0x600>;
+
+			scm_wkup_conf: scm_wkup_conf at 0 {
+				compatible = "syscon";
+				reg = <0x0 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
 		};
 
-		dra7_ctrl_general: tisyscon at 4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
+		counter32k: counter at 4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
 		};
 
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
+			reg = <0xe00 0x4>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap5 {
 				regulator-name = "pbias_mmc_omap5";
 				regulator-min-microvolt = <1800000>;
@@ -230,17 +264,6 @@
 			};
 		};
 
-		dra7_pmx_core: pinmux at 4a003400 {
-			compatible = "ti,dra7-padconf", "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
 		sdma: dma-controller at 4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1410,7 +1433,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&dcan1_sys_clk_mux>;
 			status = "disabled";
@@ -1420,7 +1443,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			syscon-raminit = <&scm_conf 0x558 1>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sys_clkin1>;
 			status = "disabled";
-- 
1.7.9.5

[PATCHv4 35/35] ARM: OMAP4+: control: add support for initializing control module via DT

[Tero Kristo]

OMAP4, OMAP5 and DRA7 now parse DT entries for control module address spaces,
and set up syscon mappings appropriately. Low level IO init is updated to
remove the legacy control module mappings for these devices also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |    3 +++
 arch/arm/mach-omap2/io.c      |    6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 9f96e60..e63cfb2 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -649,6 +649,9 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,omap3-scrm", .data = &omap2_ctrl_data },
+	{ .compatible = "ti,omap4-ctrl", .data = &ctrl_data },
+	{ .compatible = "ti,omap5-ctrl", .data = &ctrl_data },
+	{ .compatible = "ti,dra7-ctrl", .data = &ctrl_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6c39cc0..7743e367 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -631,8 +631,8 @@ void __init omap4430_init_early(void)
 {
 	omap2_set_globals_tap(OMAP443X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
@@ -659,8 +659,8 @@ void __init omap5_init_early(void)
 {
 	omap2_set_globals_tap(OMAP54XX_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
@@ -684,8 +684,8 @@ void __init omap5_init_late(void)
 void __init dra7xx_init_early(void)
 {
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	dra7xxx_check_revision();
-- 
1.7.9.5

[PATCHv4 35/35] ARM: OMAP4+: control: add support for initializing control module via DT

[Tero Kristo]

OMAP4, OMAP5 and DRA7 now parse DT entries for control module address spaces,
and set up syscon mappings appropriately. Low level IO init is updated to
remove the legacy control module mappings for these devices also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |    3 +++
 arch/arm/mach-omap2/io.c      |    6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 9f96e60..e63cfb2 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -649,6 +649,9 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scrm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,omap3-scrm", .data = &omap2_ctrl_data },
+	{ .compatible = "ti,omap4-ctrl", .data = &ctrl_data },
+	{ .compatible = "ti,omap5-ctrl", .data = &ctrl_data },
+	{ .compatible = "ti,dra7-ctrl", .data = &ctrl_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6c39cc0..7743e367 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -631,8 +631,8 @@ void __init omap4430_init_early(void)
 {
 	omap2_set_globals_tap(OMAP443X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
@@ -659,8 +659,8 @@ void __init omap5_init_early(void)
 {
 	omap2_set_globals_tap(OMAP54XX_CLASS,
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
@@ -684,8 +684,8 @@ void __init omap5_init_late(void)
 void __init dra7xx_init_early(void)
 {
 	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
-	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap2_control_base_init();
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	dra7xxx_check_revision();
-- 
1.7.9.5

Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> Hi,
> 
> Changes in this set compared to v3:
> 
> - Changed the SCM module DT node layout based on comments from Tony;
>   basically the wkup / core are split into their own nodes now. This
>   applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>   control module integrated as one instance (Patch 26, 30, 33, 34)
> - Changed the tisyscon node name to scm_conf. This name is more
>   descriptive for the purpose being used, scm_conf was already used
>   as an alias (Patch 24, 25, 27, 29)
> - Rest of the patches have no changes compared to v3.
> 
> Testing done:
> - am335x-evm      : boot
> - am335x-evmsk    : boot
> - am3517-evm      : boot
> - am43x-epos-evm  : boot
> - am437x-gp-evm   : boot
> - omap3-beagle-xm : boot
> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
> - am335x-boneblack: boot
> - am335x-bone     : boot
> - dra7xx-evm      : boot
> - omap3-n900      : boot
> - omap5-uevm      : boot
> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
> - omap4-panda     : boot
> - omap2430-sdp    : boot
> - omap3430-sdp    : boot
> - omap4-sdp-es23plus: boot
> 
> Test branch pushed at:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: 4.0-rc1-prcm-cleanup-v4

Boots for me also for 2430-sdp.

But for dm8168-evm, it fails early on, see below.

Regards,

Tony

[    0.000000] TI816X ES1.1 (neon )
[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000514
[    0.000000] pgd = c0004000
[    0.000000] [00000514] *pgd=00000000
[    0.000000] Internal error: Oops: 5 [#1] SMP ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4 #291
[    0.000000] Hardware name: Generic ti816x (Flattened Device Tree)
[    0.000000] task: c08c2048 ti: c08bc000 task.ti: c08bc000
[    0.000000] PC is at am33xx_clkdm_wakeup+0x18/0x3c
[    0.000000] LR is at clkdm_wakeup_nolock+0x48/0x68
[    0.000000] pc : [<c0030f4c>]    lr : [<c0033918>]    psr: a0000193
[    0.000000] sp : c08bdf30  ip : c094f528  fp : c076d94c
[    0.000000] r10: 80000200  r9 : c08c38dc  r8 : c08c38dc
[    0.000000] r7 : c112d444  r6 : c094f69c  r5 : c08cdba8  r4 : c08cf1c8
[    0.000000] r3 : 00000014  r2 : 00000514  r1 : 00000514  r0 : c08cf1c8
[    0.000000] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 10c5387d  Table: 80004019  DAC: 00000015
[    0.000000] Process swapper (pid: 0, stack limit = 0xc08bc218)
[    0.000000] Stack: (0xc08bdf30 to 0xc08be000)
[    0.000000] df20:                                     c08c2048 c08cf1c8 c08cdba8 c0033950
[    0.000000] df40: 00000003 c08cf1c8 c08cdba8 c0033b18 c089df40 2f800000 c08c1d0c c0859fb8
[    0.000000] df60: c0859f8c c08544a8 c08bdf78 c08bdf88 c094e8c0 ef7fce80 00000000 00000000
[    0.000000] df80: 00000000 c094e780 00000000 00000000 c076bdb0 c08bdfb4 00000000 00000000
[    0.000000] dfa0: c094e780 ffffffff c08be8c0 00000001 00000000 c094e780 00000000 c085094c
[    0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c089f778 c094e994 c08be96c
[    0.000000] dfe0: c089f774 c08c3a04 80004059 413fc082 00000000 80008074 00000000 00000000
[    0.000000] [<c0030f4c>] (am33xx_clkdm_wakeup) from [<c0033918>] (clkdm_wakeup_nolock+0x48/0x68)
[    0.000000] [<c0033918>] (clkdm_wakeup_nolock) from [<c0033950>] (clkdm_wakeup+0x18/0x2c)
[    0.000000] [<c0033950>] (clkdm_wakeup) from [<c0033b18>] (clkdm_complete_init+0xb4/0xf8)
[    0.000000] [<c0033b18>] (clkdm_complete_init) from [<c0859fb8>] (ti816x_init_early+0x2c/0x64)
[    0.000000] [<c0859fb8>] (ti816x_init_early) from [<c08544a8>] (setup_arch+0x8d4/0x9b8)
[    0.000000] [<c08544a8>] (setup_arch) from [<c085094c>] (start_kernel+0x98/0x3e8)
[    0.000000] [<c085094c>] (start_kernel) from [<80008074>] (0x80008074)
[    0.000000] Code: e1d010be e59c2000 e0831001 e0822001 (e5923000) 
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150318 07:45]:
> Hi,
> 
> Changes in this set compared to v3:
> 
> - Changed the SCM module DT node layout based on comments from Tony;
>   basically the wkup / core are split into their own nodes now. This
>   applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>   control module integrated as one instance (Patch 26, 30, 33, 34)
> - Changed the tisyscon node name to scm_conf. This name is more
>   descriptive for the purpose being used, scm_conf was already used
>   as an alias (Patch 24, 25, 27, 29)
> - Rest of the patches have no changes compared to v3.
> 
> Testing done:
> - am335x-evm      : boot
> - am335x-evmsk    : boot
> - am3517-evm      : boot
> - am43x-epos-evm  : boot
> - am437x-gp-evm   : boot
> - omap3-beagle-xm : boot
> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
> - am335x-boneblack: boot
> - am335x-bone     : boot
> - dra7xx-evm      : boot
> - omap3-n900      : boot
> - omap5-uevm      : boot
> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
> - omap4-panda     : boot
> - omap2430-sdp    : boot
> - omap3430-sdp    : boot
> - omap4-sdp-es23plus: boot
> 
> Test branch pushed at:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: 4.0-rc1-prcm-cleanup-v4

Boots for me also for 2430-sdp.

But for dm8168-evm, it fails early on, see below.

Regards,

Tony

[    0.000000] TI816X ES1.1 (neon )
[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000514
[    0.000000] pgd = c0004000
[    0.000000] [00000514] *pgd=00000000
[    0.000000] Internal error: Oops: 5 [#1] SMP ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4 #291
[    0.000000] Hardware name: Generic ti816x (Flattened Device Tree)
[    0.000000] task: c08c2048 ti: c08bc000 task.ti: c08bc000
[    0.000000] PC is at am33xx_clkdm_wakeup+0x18/0x3c
[    0.000000] LR is at clkdm_wakeup_nolock+0x48/0x68
[    0.000000] pc : [<c0030f4c>]    lr : [<c0033918>]    psr: a0000193
[    0.000000] sp : c08bdf30  ip : c094f528  fp : c076d94c
[    0.000000] r10: 80000200  r9 : c08c38dc  r8 : c08c38dc
[    0.000000] r7 : c112d444  r6 : c094f69c  r5 : c08cdba8  r4 : c08cf1c8
[    0.000000] r3 : 00000014  r2 : 00000514  r1 : 00000514  r0 : c08cf1c8
[    0.000000] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 10c5387d  Table: 80004019  DAC: 00000015
[    0.000000] Process swapper (pid: 0, stack limit = 0xc08bc218)
[    0.000000] Stack: (0xc08bdf30 to 0xc08be000)
[    0.000000] df20:                                     c08c2048 c08cf1c8 c08cdba8 c0033950
[    0.000000] df40: 00000003 c08cf1c8 c08cdba8 c0033b18 c089df40 2f800000 c08c1d0c c0859fb8
[    0.000000] df60: c0859f8c c08544a8 c08bdf78 c08bdf88 c094e8c0 ef7fce80 00000000 00000000
[    0.000000] df80: 00000000 c094e780 00000000 00000000 c076bdb0 c08bdfb4 00000000 00000000
[    0.000000] dfa0: c094e780 ffffffff c08be8c0 00000001 00000000 c094e780 00000000 c085094c
[    0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c089f778 c094e994 c08be96c
[    0.000000] dfe0: c089f774 c08c3a04 80004059 413fc082 00000000 80008074 00000000 00000000
[    0.000000] [<c0030f4c>] (am33xx_clkdm_wakeup) from [<c0033918>] (clkdm_wakeup_nolock+0x48/0x68)
[    0.000000] [<c0033918>] (clkdm_wakeup_nolock) from [<c0033950>] (clkdm_wakeup+0x18/0x2c)
[    0.000000] [<c0033950>] (clkdm_wakeup) from [<c0033b18>] (clkdm_complete_init+0xb4/0xf8)
[    0.000000] [<c0033b18>] (clkdm_complete_init) from [<c0859fb8>] (ti816x_init_early+0x2c/0x64)
[    0.000000] [<c0859fb8>] (ti816x_init_early) from [<c08544a8>] (setup_arch+0x8d4/0x9b8)
[    0.000000] [<c08544a8>] (setup_arch) from [<c085094c>] (start_kernel+0x98/0x3e8)
[    0.000000] [<c085094c>] (start_kernel) from [<80008074>] (0x80008074)
[    0.000000] Code: e1d010be e59c2000 e0831001 e0822001 (e5923000) 
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

On 03/19/2015 12:07 AM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
>> Hi,
>>
>> Changes in this set compared to v3:
>>
>> - Changed the SCM module DT node layout based on comments from Tony;
>>    basically the wkup / core are split into their own nodes now. This
>>    applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>>    control module integrated as one instance (Patch 26, 30, 33, 34)
>> - Changed the tisyscon node name to scm_conf. This name is more
>>    descriptive for the purpose being used, scm_conf was already used
>>    as an alias (Patch 24, 25, 27, 29)
>> - Rest of the patches have no changes compared to v3.
>>
>> Testing done:
>> - am335x-evm      : boot
>> - am335x-evmsk    : boot
>> - am3517-evm      : boot
>> - am43x-epos-evm  : boot
>> - am437x-gp-evm   : boot
>> - omap3-beagle-xm : boot
>> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> - am335x-boneblack: boot
>> - am335x-bone     : boot
>> - dra7xx-evm      : boot
>> - omap3-n900      : boot
>> - omap5-uevm      : boot
>> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
>> - omap4-panda     : boot
>> - omap2430-sdp    : boot
>> - omap3430-sdp    : boot
>> - omap4-sdp-es23plus: boot
>>
>> Test branch pushed at:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: 4.0-rc1-prcm-cleanup-v4
>
> Boots for me also for 2430-sdp.
>
> But for dm8168-evm, it fails early on, see below.

Yea seems I forgot to add dm81x support properly. Try this diff:

diff --git a/arch/arm/mach-omap2/cm_common.c 
b/arch/arm/mach-omap2/cm_common.c
index 2582651..23559aa 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -271,6 +271,8 @@ static const struct of_device_id 
omap_cm_dt_match_table[] __initconst = {
  	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
  	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
  	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
  	{ }
  };



>
> Regards,
>
> Tony
>
> [    0.000000] TI816X ES1.1 (neon )
> [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000514
> [    0.000000] pgd = c0004000
> [    0.000000] [00000514] *pgd=00000000
> [    0.000000] Internal error: Oops: 5 [#1] SMP ARM
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4 #291
> [    0.000000] Hardware name: Generic ti816x (Flattened Device Tree)
> [    0.000000] task: c08c2048 ti: c08bc000 task.ti: c08bc000
> [    0.000000] PC is at am33xx_clkdm_wakeup+0x18/0x3c
> [    0.000000] LR is at clkdm_wakeup_nolock+0x48/0x68
> [    0.000000] pc : [<c0030f4c>]    lr : [<c0033918>]    psr: a0000193
> [    0.000000] sp : c08bdf30  ip : c094f528  fp : c076d94c
> [    0.000000] r10: 80000200  r9 : c08c38dc  r8 : c08c38dc
> [    0.000000] r7 : c112d444  r6 : c094f69c  r5 : c08cdba8  r4 : c08cf1c8
> [    0.000000] r3 : 00000014  r2 : 00000514  r1 : 00000514  r0 : c08cf1c8
> [    0.000000] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> [    0.000000] Control: 10c5387d  Table: 80004019  DAC: 00000015
> [    0.000000] Process swapper (pid: 0, stack limit = 0xc08bc218)
> [    0.000000] Stack: (0xc08bdf30 to 0xc08be000)
> [    0.000000] df20:                                     c08c2048 c08cf1c8 c08cdba8 c0033950
> [    0.000000] df40: 00000003 c08cf1c8 c08cdba8 c0033b18 c089df40 2f800000 c08c1d0c c0859fb8
> [    0.000000] df60: c0859f8c c08544a8 c08bdf78 c08bdf88 c094e8c0 ef7fce80 00000000 00000000
> [    0.000000] df80: 00000000 c094e780 00000000 00000000 c076bdb0 c08bdfb4 00000000 00000000
> [    0.000000] dfa0: c094e780 ffffffff c08be8c0 00000001 00000000 c094e780 00000000 c085094c
> [    0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c089f778 c094e994 c08be96c
> [    0.000000] dfe0: c089f774 c08c3a04 80004059 413fc082 00000000 80008074 00000000 00000000
> [    0.000000] [<c0030f4c>] (am33xx_clkdm_wakeup) from [<c0033918>] (clkdm_wakeup_nolock+0x48/0x68)
> [    0.000000] [<c0033918>] (clkdm_wakeup_nolock) from [<c0033950>] (clkdm_wakeup+0x18/0x2c)
> [    0.000000] [<c0033950>] (clkdm_wakeup) from [<c0033b18>] (clkdm_complete_init+0xb4/0xf8)
> [    0.000000] [<c0033b18>] (clkdm_complete_init) from [<c0859fb8>] (ti816x_init_early+0x2c/0x64)
> [    0.000000] [<c0859fb8>] (ti816x_init_early) from [<c08544a8>] (setup_arch+0x8d4/0x9b8)
> [    0.000000] [<c08544a8>] (setup_arch) from [<c085094c>] (start_kernel+0x98/0x3e8)
> [    0.000000] [<c085094c>] (start_kernel) from [<80008074>] (0x80008074)
> [    0.000000] Code: e1d010be e59c2000 e0831001 e0822001 (e5923000)
> [    0.000000] ---[ end trace cb88537fdc8fa200 ]---
> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
>

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

On 03/19/2015 12:07 AM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [150318 07:45]:
>> Hi,
>>
>> Changes in this set compared to v3:
>>
>> - Changed the SCM module DT node layout based on comments from Tony;
>>    basically the wkup / core are split into their own nodes now. This
>>    applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>>    control module integrated as one instance (Patch 26, 30, 33, 34)
>> - Changed the tisyscon node name to scm_conf. This name is more
>>    descriptive for the purpose being used, scm_conf was already used
>>    as an alias (Patch 24, 25, 27, 29)
>> - Rest of the patches have no changes compared to v3.
>>
>> Testing done:
>> - am335x-evm      : boot
>> - am335x-evmsk    : boot
>> - am3517-evm      : boot
>> - am43x-epos-evm  : boot
>> - am437x-gp-evm   : boot
>> - omap3-beagle-xm : boot
>> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> - am335x-boneblack: boot
>> - am335x-bone     : boot
>> - dra7xx-evm      : boot
>> - omap3-n900      : boot
>> - omap5-uevm      : boot
>> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
>> - omap4-panda     : boot
>> - omap2430-sdp    : boot
>> - omap3430-sdp    : boot
>> - omap4-sdp-es23plus: boot
>>
>> Test branch pushed at:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: 4.0-rc1-prcm-cleanup-v4
>
> Boots for me also for 2430-sdp.
>
> But for dm8168-evm, it fails early on, see below.

Yea seems I forgot to add dm81x support properly. Try this diff:

diff --git a/arch/arm/mach-omap2/cm_common.c 
b/arch/arm/mach-omap2/cm_common.c
index 2582651..23559aa 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -271,6 +271,8 @@ static const struct of_device_id 
omap_cm_dt_match_table[] __initconst = {
  	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
  	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
  	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
+	{ .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
+	{ .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
  	{ }
  };



>
> Regards,
>
> Tony
>
> [    0.000000] TI816X ES1.1 (neon )
> [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000514
> [    0.000000] pgd = c0004000
> [    0.000000] [00000514] *pgd=00000000
> [    0.000000] Internal error: Oops: 5 [#1] SMP ARM
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4 #291
> [    0.000000] Hardware name: Generic ti816x (Flattened Device Tree)
> [    0.000000] task: c08c2048 ti: c08bc000 task.ti: c08bc000
> [    0.000000] PC is at am33xx_clkdm_wakeup+0x18/0x3c
> [    0.000000] LR is at clkdm_wakeup_nolock+0x48/0x68
> [    0.000000] pc : [<c0030f4c>]    lr : [<c0033918>]    psr: a0000193
> [    0.000000] sp : c08bdf30  ip : c094f528  fp : c076d94c
> [    0.000000] r10: 80000200  r9 : c08c38dc  r8 : c08c38dc
> [    0.000000] r7 : c112d444  r6 : c094f69c  r5 : c08cdba8  r4 : c08cf1c8
> [    0.000000] r3 : 00000014  r2 : 00000514  r1 : 00000514  r0 : c08cf1c8
> [    0.000000] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> [    0.000000] Control: 10c5387d  Table: 80004019  DAC: 00000015
> [    0.000000] Process swapper (pid: 0, stack limit = 0xc08bc218)
> [    0.000000] Stack: (0xc08bdf30 to 0xc08be000)
> [    0.000000] df20:                                     c08c2048 c08cf1c8 c08cdba8 c0033950
> [    0.000000] df40: 00000003 c08cf1c8 c08cdba8 c0033b18 c089df40 2f800000 c08c1d0c c0859fb8
> [    0.000000] df60: c0859f8c c08544a8 c08bdf78 c08bdf88 c094e8c0 ef7fce80 00000000 00000000
> [    0.000000] df80: 00000000 c094e780 00000000 00000000 c076bdb0 c08bdfb4 00000000 00000000
> [    0.000000] dfa0: c094e780 ffffffff c08be8c0 00000001 00000000 c094e780 00000000 c085094c
> [    0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c089f778 c094e994 c08be96c
> [    0.000000] dfe0: c089f774 c08c3a04 80004059 413fc082 00000000 80008074 00000000 00000000
> [    0.000000] [<c0030f4c>] (am33xx_clkdm_wakeup) from [<c0033918>] (clkdm_wakeup_nolock+0x48/0x68)
> [    0.000000] [<c0033918>] (clkdm_wakeup_nolock) from [<c0033950>] (clkdm_wakeup+0x18/0x2c)
> [    0.000000] [<c0033950>] (clkdm_wakeup) from [<c0033b18>] (clkdm_complete_init+0xb4/0xf8)
> [    0.000000] [<c0033b18>] (clkdm_complete_init) from [<c0859fb8>] (ti816x_init_early+0x2c/0x64)
> [    0.000000] [<c0859fb8>] (ti816x_init_early) from [<c08544a8>] (setup_arch+0x8d4/0x9b8)
> [    0.000000] [<c08544a8>] (setup_arch) from [<c085094c>] (start_kernel+0x98/0x3e8)
> [    0.000000] [<c085094c>] (start_kernel) from [<80008074>] (0x80008074)
> [    0.000000] Code: e1d010be e59c2000 e0831001 e0822001 (e5923000)
> [    0.000000] ---[ end trace cb88537fdc8fa200 ]---
> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
>

Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150319 00:48]:
> On 03/19/2015 12:07 AM, Tony Lindgren wrote:
> >
> >But for dm8168-evm, it fails early on, see below.
> 
> Yea seems I forgot to add dm81x support properly. Try this diff:
> 
> diff --git a/arch/arm/mach-omap2/cm_common.c
> b/arch/arm/mach-omap2/cm_common.c
> index 2582651..23559aa 100644
> --- a/arch/arm/mach-omap2/cm_common.c
> +++ b/arch/arm/mach-omap2/cm_common.c
> @@ -271,6 +271,8 @@ static const struct of_device_id
> omap_cm_dt_match_table[] __initconst = {
>  	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
>  	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
>  	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
> +	{ .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
> +	{ .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
>  	{ }
>  };

Boots a bit further now with that, but then produces:

...
[    0.278020] omap_hwmod: tptc0 using broken dt data from edma
[    0.284133] omap_hwmod: tptc1 using broken dt data from edma
[    0.290207] omap_hwmod: tptc2 using broken dt data from edma
[    0.296307] omap_hwmod: tptc3 using broken dt data from edma
[    0.305359] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.317206] pinctrl core: initialized pinctrl subsystem
[    0.339667] NET: Registered protocol family 16
[    0.349174] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.358130] cpuidle: using governor ladder
[    0.362433] cpuidle: using governor menu
[    0.366948] Unable to handle kernel NULL pointer dereference at virtual address 00000040
[    0.375364] pgd = c0004000
[    0.378223] [00000040] *pgd=00000000
[    0.381983] Internal error: Oops: 5 [#1] SMP ARM
[    0.386803] Modules linked in:
[    0.390026] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4-dirty #305
[    0.399743] Hardware name: Generic ti816x (Flattened Device Tree)
[    0.406078] task: ed894b80 ti: ed896000 task.ti: ed896000
[    0.411704] PC is at omap_ctrl_readl+0x48/0x58
[    0.416347] LR is at omap_type.part.0+0x7c/0xd8
[    0.421078] pc : [<c0023d60>]    lr : [<c0023bd4>]    psr: 60000113
[    0.421078] sp : ed897eb0  ip : 00000000  fp : c089f574
[    0.433022] r10: c0850598  r9 : c089f588  r8 : 00000000
[    0.438466] r7 : c08537ac  r6 : ed902c00  r5 : 00000000  r4 : c094f03c
[    0.445246] r3 : 00000040  r2 : c094ebcc  r1 : 00000000  r0 : 00000040
[    0.452025] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    0.459605] Control: 10c5387d  Table: 80004019  DAC: 00000015
[    0.465581] Process swapper/0 (pid: 1, stack limit = 0xed896218)
[    0.471825] Stack: (0xed897eb0 to 0xed898000)
[    0.476379] 7ea0:                                     c08c4540 c085ea18 c089df40 00000000
[    0.484854] 7ec0: 00000000 ed902c00 c08537ac c085a208 c089df40 c08a6500 c08b04c4 c0862fdc
[    0.493327] 7ee0: c089df40 c08c1e30 c08c1e30 c0862c78 c089df40 c08537c8 00000000 c0008b84
[    0.501801] 7f00: ed894b80 c08fc494 00000000 ed894b80 ed895100 00000004 00000006 00000000
[    0.510278] 7f20: 00000000 c008a2bc c0850598 ef7fc9d0 ef7fc9cb c005c784 c076c0a0 ef7fc9da
[    0.518753] 7f40: 00000003 00000003 00000000 c08b5f18 c08b5f20 00000003 c094e780 00000093
[    0.527226] 7f60: c094e780 c0850598 c089f574 c0850ea0 00000003 00000003 c0850598 ffffffff
[    0.535699] 7f80: 00000000 00000000 c05d2ca8 00000000 00000000 00000000 00000000 00000000
[    0.544174] 7fa0: 00000000 c05d2cb0 00000000 c000e910 00000000 00000000 00000000 00000000
[    0.552649] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    0.561122] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 ffffffff
[    0.569598] [<c0023d60>] (omap_ctrl_readl) from [<00000000>] (  (null))
[    0.576471] Code: e28dd00c e49df004 e5921000 e0813003 (e5930000) 
[    0.582860] ---[ end trace 00a172dd2625b740 ]---
[    0.587757] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.587757] 
[    0.597310] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.597310] 

Regards,

Tony

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [150319 00:48]:
> On 03/19/2015 12:07 AM, Tony Lindgren wrote:
> >
> >But for dm8168-evm, it fails early on, see below.
> 
> Yea seems I forgot to add dm81x support properly. Try this diff:
> 
> diff --git a/arch/arm/mach-omap2/cm_common.c
> b/arch/arm/mach-omap2/cm_common.c
> index 2582651..23559aa 100644
> --- a/arch/arm/mach-omap2/cm_common.c
> +++ b/arch/arm/mach-omap2/cm_common.c
> @@ -271,6 +271,8 @@ static const struct of_device_id
> omap_cm_dt_match_table[] __initconst = {
>  	{ .compatible = "ti,dra7-cm-core", .data = &cm2_data },
>  	{ .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
>  	{ .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
> +	{ .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
> +	{ .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
>  	{ }
>  };

Boots a bit further now with that, but then produces:

...
[    0.278020] omap_hwmod: tptc0 using broken dt data from edma
[    0.284133] omap_hwmod: tptc1 using broken dt data from edma
[    0.290207] omap_hwmod: tptc2 using broken dt data from edma
[    0.296307] omap_hwmod: tptc3 using broken dt data from edma
[    0.305359] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.317206] pinctrl core: initialized pinctrl subsystem
[    0.339667] NET: Registered protocol family 16
[    0.349174] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.358130] cpuidle: using governor ladder
[    0.362433] cpuidle: using governor menu
[    0.366948] Unable to handle kernel NULL pointer dereference at virtual address 00000040
[    0.375364] pgd = c0004000
[    0.378223] [00000040] *pgd=00000000
[    0.381983] Internal error: Oops: 5 [#1] SMP ARM
[    0.386803] Modules linked in:
[    0.390026] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc4-next-20150318-00040-gc5b9bf4-dirty #305
[    0.399743] Hardware name: Generic ti816x (Flattened Device Tree)
[    0.406078] task: ed894b80 ti: ed896000 task.ti: ed896000
[    0.411704] PC is at omap_ctrl_readl+0x48/0x58
[    0.416347] LR is at omap_type.part.0+0x7c/0xd8
[    0.421078] pc : [<c0023d60>]    lr : [<c0023bd4>]    psr: 60000113
[    0.421078] sp : ed897eb0  ip : 00000000  fp : c089f574
[    0.433022] r10: c0850598  r9 : c089f588  r8 : 00000000
[    0.438466] r7 : c08537ac  r6 : ed902c00  r5 : 00000000  r4 : c094f03c
[    0.445246] r3 : 00000040  r2 : c094ebcc  r1 : 00000000  r0 : 00000040
[    0.452025] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    0.459605] Control: 10c5387d  Table: 80004019  DAC: 00000015
[    0.465581] Process swapper/0 (pid: 1, stack limit = 0xed896218)
[    0.471825] Stack: (0xed897eb0 to 0xed898000)
[    0.476379] 7ea0:                                     c08c4540 c085ea18 c089df40 00000000
[    0.484854] 7ec0: 00000000 ed902c00 c08537ac c085a208 c089df40 c08a6500 c08b04c4 c0862fdc
[    0.493327] 7ee0: c089df40 c08c1e30 c08c1e30 c0862c78 c089df40 c08537c8 00000000 c0008b84
[    0.501801] 7f00: ed894b80 c08fc494 00000000 ed894b80 ed895100 00000004 00000006 00000000
[    0.510278] 7f20: 00000000 c008a2bc c0850598 ef7fc9d0 ef7fc9cb c005c784 c076c0a0 ef7fc9da
[    0.518753] 7f40: 00000003 00000003 00000000 c08b5f18 c08b5f20 00000003 c094e780 00000093
[    0.527226] 7f60: c094e780 c0850598 c089f574 c0850ea0 00000003 00000003 c0850598 ffffffff
[    0.535699] 7f80: 00000000 00000000 c05d2ca8 00000000 00000000 00000000 00000000 00000000
[    0.544174] 7fa0: 00000000 c05d2cb0 00000000 c000e910 00000000 00000000 00000000 00000000
[    0.552649] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    0.561122] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 ffffffff
[    0.569598] [<c0023d60>] (omap_ctrl_readl) from [<00000000>] (  (null))
[    0.576471] Code: e28dd00c e49df004 e5921000 e0813003 (e5930000) 
[    0.582860] ---[ end trace 00a172dd2625b740 ]---
[    0.587757] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.587757] 
[    0.597310] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.597310] 

Regards,

Tony

Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Sakari Ailus]

[-- Attachment #1: Type: text/plain, Size: 2501 bytes --]

Hi Tero,

On Wed, Mar 18, 2015 at 04:43:45PM +0200, Tero Kristo wrote:
> Hi,
> 
> Changes in this set compared to v3:
> 
> - Changed the SCM module DT node layout based on comments from Tony;
>   basically the wkup / core are split into their own nodes now. This
>   applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>   control module integrated as one instance (Patch 26, 30, 33, 34)
> - Changed the tisyscon node name to scm_conf. This name is more
>   descriptive for the purpose being used, scm_conf was already used
>   as an alias (Patch 24, 25, 27, 29)
> - Rest of the patches have no changes compared to v3.
> 
> Testing done:
> - am335x-evm      : boot
> - am335x-evmsk    : boot
> - am3517-evm      : boot
> - am43x-epos-evm  : boot
> - am437x-gp-evm   : boot
> - omap3-beagle-xm : boot
> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
> - am335x-boneblack: boot
> - am335x-bone     : boot
> - dra7xx-evm      : boot
> - omap3-n900      : boot
> - omap5-uevm      : boot
> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
> - omap4-panda     : boot
> - omap2430-sdp    : boot
> - omap3430-sdp    : boot
> - omap4-sdp-es23plus: boot
> 
> Test branch pushed at:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: 4.0-rc1-prcm-cleanup-v4

I tried compiling this, but I get a few linker errors:

arch/arm/mach-omap2/built-in.o:(.init.data+0x47d8): undefined reference to `am33xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x47f0): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4808): undefined reference to `omap2xxx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4838): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4868): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4880): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4898): undefined reference to `omap2xxx_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48c8): undefined reference to `omap4_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48e0): undefined reference to `omap4_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48f8): undefined reference to `am33xx_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4910): undefined reference to `omap4_cm_init'

.config attached.

-- 
Regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi	XMPP: sailus@retiisi.org.uk

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 66495 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.0.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y

#
# TI OMAP/AM/DM/DRA Family
#
CONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_OMAP3430=y
# CONFIG_SOC_TI81XX is not set
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y

#
# OMAP Legacy Platform Data Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3517EVM=y
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_CM_T3730=y
CONFIG_MACH_SBC3530=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
# CONFIG_ARM_KERNMEM_PERMS is not set
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_773022=y
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
# CONFIG_SMP is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_CMDLINE="ip=192.168.1.130::192.168.1.129:::usb0:off root=/dev/nfs nfsroot=192.168.1.129:/scratch/rootfs/laiskiainen rootdelay=5 rw console=tty0 console=ttyO2,115200n8 musb_core.debug=1 musb_hdrc.debug=2 musb.debug=3 loglevel=8"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# ARM CPU Idle Drivers
#
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_VEXPRESS_CONFIG=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_VEXPRESS_SYSCFG=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_OF_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_OMAP is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_HDQ_MASTER_OMAP is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_VERSATILE is not set
CONFIG_POWER_RESET_VEXPRESS=y
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_VEXPRESS is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_SMIAPP_PLL=m
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAPP=m
# CONFIG_VIDEO_S5C73M3 is not set

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
CONFIG_VIDEO_AS3645A=m
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#

#
# Customise DVB Frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#

#
# Direct Rendering Manager
#
# CONFIG_DRM is not set

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_OMAP2_DSS is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_TI_CPPI41_DMA is not set
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
CONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=m
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_SUBSET=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_MCP795 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_QCOM is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_CLKSRC_VERSATILE=y
# CONFIG_ASM9260_TIMER is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
# CONFIG_TI_EMIF is not set
CONFIG_OMAP_GPMC=y
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Android
#
# CONFIG_ANDROID is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_OMAP2UART1 is not set
# CONFIG_DEBUG_OMAP2UART2 is not set
# CONFIG_DEBUG_OMAP2UART3 is not set
CONFIG_DEBUG_OMAP3UART3=y
# CONFIG_DEBUG_OMAP4UART3 is not set
# CONFIG_DEBUG_OMAP3UART4 is not set
# CONFIG_DEBUG_OMAP4UART4 is not set
# CONFIG_DEBUG_TI81XXUART1 is not set
# CONFIG_DEBUG_TI81XXUART2 is not set
# CONFIG_DEBUG_TI81XXUART3 is not set
# CONFIG_DEBUG_AM33XXUART1 is not set
# CONFIG_DEBUG_ZOOM_UART is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_OMAP2PLUS_UART=y
CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_BCM63XX is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Sakari Ailus]

Hi Tero,

On Wed, Mar 18, 2015 at 04:43:45PM +0200, Tero Kristo wrote:
> Hi,
> 
> Changes in this set compared to v3:
> 
> - Changed the SCM module DT node layout based on comments from Tony;
>   basically the wkup / core are split into their own nodes now. This
>   applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>   control module integrated as one instance (Patch 26, 30, 33, 34)
> - Changed the tisyscon node name to scm_conf. This name is more
>   descriptive for the purpose being used, scm_conf was already used
>   as an alias (Patch 24, 25, 27, 29)
> - Rest of the patches have no changes compared to v3.
> 
> Testing done:
> - am335x-evm      : boot
> - am335x-evmsk    : boot
> - am3517-evm      : boot
> - am43x-epos-evm  : boot
> - am437x-gp-evm   : boot
> - omap3-beagle-xm : boot
> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
> - am335x-boneblack: boot
> - am335x-bone     : boot
> - dra7xx-evm      : boot
> - omap3-n900      : boot
> - omap5-uevm      : boot
> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
> - omap4-panda     : boot
> - omap2430-sdp    : boot
> - omap3430-sdp    : boot
> - omap4-sdp-es23plus: boot
> 
> Test branch pushed at:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: 4.0-rc1-prcm-cleanup-v4

I tried compiling this, but I get a few linker errors:

arch/arm/mach-omap2/built-in.o:(.init.data+0x47d8): undefined reference to `am33xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x47f0): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4808): undefined reference to `omap2xxx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4838): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4868): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4880): undefined reference to `omap44xx_prm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4898): undefined reference to `omap2xxx_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48c8): undefined reference to `omap4_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48e0): undefined reference to `omap4_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x48f8): undefined reference to `am33xx_cm_init'
arch/arm/mach-omap2/built-in.o:(.init.data+0x4910): undefined reference to `omap4_cm_init'

.config attached.

-- 
Regards,

Sakari Ailus
e-mail: sakari.ailus at iki.fi	XMPP: sailus at retiisi.org.uk
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.0.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y

#
# TI OMAP/AM/DM/DRA Family
#
CONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_OMAP3430=y
# CONFIG_SOC_TI81XX is not set
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y

#
# OMAP Legacy Platform Data Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3517EVM=y
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_CM_T3730=y
CONFIG_MACH_SBC3530=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
# CONFIG_ARM_KERNMEM_PERMS is not set
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_773022=y
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
# CONFIG_SMP is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_CMDLINE="ip=192.168.1.130::192.168.1.129:::usb0:off root=/dev/nfs nfsroot=192.168.1.129:/scratch/rootfs/laiskiainen rootdelay=5 rw console=tty0 console=ttyO2,115200n8 musb_core.debug=1 musb_hdrc.debug=2 musb.debug=3 loglevel=8"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# ARM CPU Idle Drivers
#
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_VEXPRESS_CONFIG=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_VEXPRESS_SYSCFG=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_OF_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_OMAP is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_HDQ_MASTER_OMAP is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_VERSATILE is not set
CONFIG_POWER_RESET_VEXPRESS=y
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_VEXPRESS is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_SMIAPP_PLL=m
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAPP=m
# CONFIG_VIDEO_S5C73M3 is not set

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
CONFIG_VIDEO_AS3645A=m
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#

#
# Customise DVB Frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#

#
# Direct Rendering Manager
#
# CONFIG_DRM is not set

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_OMAP2_DSS is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_TI_CPPI41_DMA is not set
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
CONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=m
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_SUBSET=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_MCP795 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_QCOM is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_CLKSRC_VERSATILE=y
# CONFIG_ASM9260_TIMER is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
# CONFIG_TI_EMIF is not set
CONFIG_OMAP_GPMC=y
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Android
#
# CONFIG_ANDROID is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_OMAP2UART1 is not set
# CONFIG_DEBUG_OMAP2UART2 is not set
# CONFIG_DEBUG_OMAP2UART3 is not set
CONFIG_DEBUG_OMAP3UART3=y
# CONFIG_DEBUG_OMAP4UART3 is not set
# CONFIG_DEBUG_OMAP3UART4 is not set
# CONFIG_DEBUG_OMAP4UART4 is not set
# CONFIG_DEBUG_TI81XXUART1 is not set
# CONFIG_DEBUG_TI81XXUART2 is not set
# CONFIG_DEBUG_TI81XXUART3 is not set
# CONFIG_DEBUG_AM33XXUART1 is not set
# CONFIG_DEBUG_ZOOM_UART is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_OMAP2PLUS_UART=y
CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_BCM63XX is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

On 03/19/2015 02:00 AM, Sakari Ailus wrote:
> Hi Tero,
>
> On Wed, Mar 18, 2015 at 04:43:45PM +0200, Tero Kristo wrote:
>> Hi,
>>
>> Changes in this set compared to v3:
>>
>> - Changed the SCM module DT node layout based on comments from Tony;
>>    basically the wkup / core are split into their own nodes now. This
>>    applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>>    control module integrated as one instance (Patch 26, 30, 33, 34)
>> - Changed the tisyscon node name to scm_conf. This name is more
>>    descriptive for the purpose being used, scm_conf was already used
>>    as an alias (Patch 24, 25, 27, 29)
>> - Rest of the patches have no changes compared to v3.
>>
>> Testing done:
>> - am335x-evm      : boot
>> - am335x-evmsk    : boot
>> - am3517-evm      : boot
>> - am43x-epos-evm  : boot
>> - am437x-gp-evm   : boot
>> - omap3-beagle-xm : boot
>> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> - am335x-boneblack: boot
>> - am335x-bone     : boot
>> - dra7xx-evm      : boot
>> - omap3-n900      : boot
>> - omap5-uevm      : boot
>> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
>> - omap4-panda     : boot
>> - omap2430-sdp    : boot
>> - omap3430-sdp    : boot
>> - omap4-sdp-es23plus: boot
>>
>> Test branch pushed at:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: 4.0-rc1-prcm-cleanup-v4
>
> I tried compiling this, but I get a few linker errors:

Right, I always forget about silly people who do things like OMAP3 only 
builds or something.... Shall be fixed.

-Tero

>
> arch/arm/mach-omap2/built-in.o:(.init.data+0x47d8): undefined reference to `am33xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x47f0): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4808): undefined reference to `omap2xxx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4838): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4868): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4880): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4898): undefined reference to `omap2xxx_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48c8): undefined reference to `omap4_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48e0): undefined reference to `omap4_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48f8): undefined reference to `am33xx_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4910): undefined reference to `omap4_cm_init'
>
> .config attached.
>

[PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1

[Tero Kristo]

On 03/19/2015 02:00 AM, Sakari Ailus wrote:
> Hi Tero,
>
> On Wed, Mar 18, 2015 at 04:43:45PM +0200, Tero Kristo wrote:
>> Hi,
>>
>> Changes in this set compared to v3:
>>
>> - Changed the SCM module DT node layout based on comments from Tony;
>>    basically the wkup / core are split into their own nodes now. This
>>    applies for omap3, omap4, omap5 and dra7, rest of the SoCs have their
>>    control module integrated as one instance (Patch 26, 30, 33, 34)
>> - Changed the tisyscon node name to scm_conf. This name is more
>>    descriptive for the purpose being used, scm_conf was already used
>>    as an alias (Patch 24, 25, 27, 29)
>> - Rest of the patches have no changes compared to v3.
>>
>> Testing done:
>> - am335x-evm      : boot
>> - am335x-evmsk    : boot
>> - am3517-evm      : boot
>> - am43x-epos-evm  : boot
>> - am437x-gp-evm   : boot
>> - omap3-beagle-xm : boot
>> - omap3-beagle    : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> - am335x-boneblack: boot
>> - am335x-bone     : boot
>> - dra7xx-evm      : boot
>> - omap3-n900      : boot
>> - omap5-uevm      : boot
>> - omap4-panda-es  : boot, suspend-resume (ret), cpuidle (ret)
>> - omap4-panda     : boot
>> - omap2430-sdp    : boot
>> - omap3430-sdp    : boot
>> - omap4-sdp-es23plus: boot
>>
>> Test branch pushed at:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: 4.0-rc1-prcm-cleanup-v4
>
> I tried compiling this, but I get a few linker errors:

Right, I always forget about silly people who do things like OMAP3 only 
builds or something.... Shall be fixed.

-Tero

>
> arch/arm/mach-omap2/built-in.o:(.init.data+0x47d8): undefined reference to `am33xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x47f0): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4808): undefined reference to `omap2xxx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4838): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4868): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4880): undefined reference to `omap44xx_prm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4898): undefined reference to `omap2xxx_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48c8): undefined reference to `omap4_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48e0): undefined reference to `omap4_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x48f8): undefined reference to `am33xx_cm_init'
> arch/arm/mach-omap2/built-in.o:(.init.data+0x4910): undefined reference to `omap4_cm_init'
>
> .config attached.
>