From: Brian Norris <computersforpeace@gmail.com> To: Tejun Heo <tj@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Brian Norris <computersforpeace@gmail.com>, Gregory Fong <gregory.0xf0@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Subject: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY Date: Wed, 18 Mar 2015 18:23:42 -0700 [thread overview] Message-ID: <1426728222-8197-5-git-send-email-computersforpeace@gmail.com> (raw) In-Reply-To: <1426728222-8197-1-git-send-email-computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> --- Light dependency on: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/331921.html for the surrounding text. arch/arm/boot/dts/bcm7445.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 9eaeac8dce1b..7a7c4d8c2afe 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -108,6 +108,42 @@ brcm,int-map-mask = <0x25c>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; }; + + sata@f045a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x45a000 0xa9c>, <0x458040 0x24>; + interrupts = <GIC_SPI 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + }; + }; + + sata_phy: sata-phy@f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0x458100 0x1e00>, <0x45804c 0x10>; + reg-names = "phy", "port-ctrl"; + #phy-cells = <1>; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; }; smpboot { -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: computersforpeace@gmail.com (Brian Norris) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY Date: Wed, 18 Mar 2015 18:23:42 -0700 [thread overview] Message-ID: <1426728222-8197-5-git-send-email-computersforpeace@gmail.com> (raw) In-Reply-To: <1426728222-8197-1-git-send-email-computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> --- Light dependency on: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/331921.html for the surrounding text. arch/arm/boot/dts/bcm7445.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 9eaeac8dce1b..7a7c4d8c2afe 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -108,6 +108,42 @@ brcm,int-map-mask = <0x25c>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; }; + + sata at f045a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x45a000 0xa9c>, <0x458040 0x24>; + interrupts = <GIC_SPI 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port at 0 { + reg = <0>; + phys = <&sata_phy 0>; + }; + + sata1: sata-port at 1 { + reg = <1>; + phys = <&sata_phy 1>; + }; + }; + + sata_phy: sata-phy at f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0x458100 0x1e00>, <0x45804c 0x10>; + reg-names = "phy", "port-ctrl"; + #phy-cells = <1>; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sata-phy at 0 { + reg = <0>; + }; + + sata-phy at 1 { + reg = <1>; + }; + }; }; smpboot { -- 1.9.1
next prev parent reply other threads:[~2015-03-19 1:23 UTC|newest] Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-03-19 1:23 [PATCH 1/5] Documentation: devicetree: add Broadcom SATA binding Brian Norris 2015-03-19 1:23 ` Brian Norris 2015-03-19 1:23 ` [PATCH 2/5] Documentation: devicetree: add Broadcom SATA PHY binding Brian Norris 2015-03-19 1:23 ` Brian Norris 2015-03-19 1:23 ` [PATCH 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips Brian Norris 2015-03-19 1:23 ` Brian Norris 2015-03-20 22:58 ` Florian Fainelli 2015-03-20 22:58 ` Florian Fainelli 2015-03-19 1:23 ` [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs Brian Norris 2015-03-19 1:23 ` Brian Norris 2015-03-20 23:02 ` Florian Fainelli 2015-03-20 23:02 ` Florian Fainelli 2015-03-21 9:09 ` Hans de Goede 2015-03-21 9:09 ` Hans de Goede 2015-03-25 21:59 ` Kishon Vijay Abraham I 2015-03-25 21:59 ` Kishon Vijay Abraham I 2015-03-25 21:59 ` Kishon Vijay Abraham I 2015-03-28 0:28 ` Brian Norris 2015-03-28 0:28 ` Brian Norris 2015-03-31 6:01 ` Kishon Vijay Abraham I 2015-03-31 6:01 ` Kishon Vijay Abraham I 2015-03-31 6:01 ` Kishon Vijay Abraham I 2015-04-02 2:28 ` Brian Norris 2015-04-02 2:28 ` Brian Norris 2015-04-07 6:07 ` Kishon Vijay Abraham I 2015-04-07 6:07 ` Kishon Vijay Abraham I 2015-04-07 6:07 ` Kishon Vijay Abraham I 2015-04-07 18:35 ` Brian Norris 2015-04-07 18:35 ` Brian Norris 2015-03-19 1:23 ` Brian Norris [this message] 2015-03-19 1:23 ` [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY Brian Norris [not found] ` <1426728222-8197-5-git-send-email-computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-03-19 11:10 ` Hans de Goede 2015-03-19 11:10 ` Hans de Goede 2015-03-19 11:10 ` Hans de Goede [not found] ` <550AAEA1.5080301-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2015-03-19 15:53 ` Brian Norris 2015-03-19 15:53 ` Brian Norris 2015-03-19 15:53 ` Brian Norris 2015-03-19 17:02 ` Hans de Goede 2015-03-19 17:02 ` Hans de Goede 2015-03-19 17:02 ` Hans de Goede 2015-03-19 17:36 ` Brian Norris 2015-03-19 17:36 ` Brian Norris 2015-03-19 19:11 ` Brian Norris 2015-03-19 19:11 ` Brian Norris 2015-03-20 8:48 ` Hans de Goede 2015-03-20 8:48 ` Hans de Goede 2015-03-19 11:33 ` Sergei Shtylyov 2015-03-19 11:33 ` Sergei Shtylyov 2015-03-19 11:33 ` Sergei Shtylyov 2015-03-19 15:58 ` Brian Norris 2015-03-19 15:58 ` Brian Norris
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1426728222-8197-5-git-send-email-computersforpeace@gmail.com \ --to=computersforpeace@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=galak@codeaurora.org \ --cc=gregory.0xf0@gmail.com \ --cc=ijc+devicetree@hellion.org.uk \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-ide@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=tj@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.