All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: axboe@kernel.dk
Cc: linux-kernel@vger.kernel.org, jack@suse.cz, hch@infradead.org,
	hannes@cmpxchg.org, linux-fsdevel@vger.kernel.org,
	vgoyal@redhat.com, lizefan@huawei.com, cgroups@vger.kernel.org,
	linux-mm@kvack.org, mhocko@suse.cz, clm@fb.com,
	fengguang.wu@intel.com, david@fromorbit.com, gthelen@google.com,
	Tejun Heo <tj@kernel.org>
Subject: [PATCH 11/18] writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter
Date: Mon, 23 Mar 2015 01:07:40 -0400	[thread overview]
Message-ID: <1427087267-16592-12-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1427087267-16592-1-git-send-email-tj@kernel.org>

Currently __wb_writeout_inc() and hard_dirty_limit() assume
global_wb_domain; however, cgroup writeback support requires
considering per-memcg wb_domain too.

This patch separates out domain-specific part of __wb_writeout_inc()
into wb_domain_writeout_inc() which takes wb_domain as a parameter and
adds the parameter to hard_dirty_limit().  This will allow these two
functions to handle per-memcg wb_domains.

This patch doesn't introduce any behavioral changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
---
 mm/page-writeback.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 840b8f2..e6c7572 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -445,17 +445,12 @@ static unsigned long wp_next_time(unsigned long cur_time)
 	return cur_time;
 }
 
-/*
- * Increment the wb's writeout completion count and the global writeout
- * completion count. Called from test_clear_page_writeback().
- */
-static inline void __wb_writeout_inc(struct bdi_writeback *wb)
+static void wb_domain_writeout_inc(struct wb_domain *dom,
+				   struct fprop_local_percpu *completions,
+				   unsigned int max_prop_frac)
 {
-	struct wb_domain *dom = &global_wb_domain;
-
-	__inc_wb_stat(wb, WB_WRITTEN);
-	__fprop_inc_percpu_max(&dom->completions, &wb->completions,
-			       wb->bdi->max_prop_frac);
+	__fprop_inc_percpu_max(&dom->completions, completions,
+			       max_prop_frac);
 	/* First event after period switching was turned off? */
 	if (!unlikely(dom->period_time)) {
 		/*
@@ -469,6 +464,17 @@ static inline void __wb_writeout_inc(struct bdi_writeback *wb)
 	}
 }
 
+/*
+ * Increment @wb's writeout completion count and the global writeout
+ * completion count. Called from test_clear_page_writeback().
+ */
+static inline void __wb_writeout_inc(struct bdi_writeback *wb)
+{
+	__inc_wb_stat(wb, WB_WRITTEN);
+	wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
+			       wb->bdi->max_prop_frac);
+}
+
 void wb_writeout_inc(struct bdi_writeback *wb)
 {
 	unsigned long flags;
@@ -571,10 +577,9 @@ static unsigned long dirty_freerun_ceiling(unsigned long thresh,
 	return (thresh + bg_thresh) / 2;
 }
 
-static unsigned long hard_dirty_limit(unsigned long thresh)
+static unsigned long hard_dirty_limit(struct wb_domain *dom,
+				      unsigned long thresh)
 {
-	struct wb_domain *dom = &global_wb_domain;
-
 	return max(thresh, dom->dirty_limit);
 }
 
@@ -744,7 +749,7 @@ static void wb_position_ratio(struct dirty_throttle_control *dtc)
 	struct bdi_writeback *wb = dtc->wb;
 	unsigned long write_bw = wb->avg_write_bandwidth;
 	unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
-	unsigned long limit = hard_dirty_limit(dtc->thresh);
+	unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
 	unsigned long wb_thresh = dtc->wb_thresh;
 	unsigned long x_intercept;
 	unsigned long setpoint;		/* dirty pages' target balance point */
@@ -1029,7 +1034,7 @@ static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
 	struct bdi_writeback *wb = dtc->wb;
 	unsigned long dirty = dtc->dirty;
 	unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
-	unsigned long limit = hard_dirty_limit(dtc->thresh);
+	unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
 	unsigned long setpoint = (freerun + limit) / 2;
 	unsigned long write_bw = wb->avg_write_bandwidth;
 	unsigned long dirty_ratelimit = wb->dirty_ratelimit;
@@ -1681,7 +1686,7 @@ void throttle_vm_writeout(gfp_t gfp_mask)
 
         for ( ; ; ) {
 		global_dirty_limits(&background_thresh, &dirty_thresh);
-		dirty_thresh = hard_dirty_limit(dirty_thresh);
+		dirty_thresh = hard_dirty_limit(&global_wb_domain, dirty_thresh);
 
                 /*
                  * Boost the allowable dirty threshold a bit for page
-- 
2.1.0


WARNING: multiple messages have this Message-ID (diff)
From: Tejun Heo <tj@kernel.org>
To: axboe@kernel.dk
Cc: linux-kernel@vger.kernel.org, jack@suse.cz, hch@infradead.org,
	hannes@cmpxchg.org, linux-fsdevel@vger.kernel.org,
	vgoyal@redhat.com, lizefan@huawei.com, cgroups@vger.kernel.org,
	linux-mm@kvack.org, mhocko@suse.cz, clm@fb.com,
	fengguang.wu@intel.com, david@fromorbit.com, gthelen@google.com,
	Tejun Heo <tj@kernel.org>
Subject: [PATCH 11/18] writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter
Date: Mon, 23 Mar 2015 01:07:40 -0400	[thread overview]
Message-ID: <1427087267-16592-12-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1427087267-16592-1-git-send-email-tj@kernel.org>

Currently __wb_writeout_inc() and hard_dirty_limit() assume
global_wb_domain; however, cgroup writeback support requires
considering per-memcg wb_domain too.

This patch separates out domain-specific part of __wb_writeout_inc()
into wb_domain_writeout_inc() which takes wb_domain as a parameter and
adds the parameter to hard_dirty_limit().  This will allow these two
functions to handle per-memcg wb_domains.

This patch doesn't introduce any behavioral changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
---
 mm/page-writeback.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 840b8f2..e6c7572 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -445,17 +445,12 @@ static unsigned long wp_next_time(unsigned long cur_time)
 	return cur_time;
 }
 
-/*
- * Increment the wb's writeout completion count and the global writeout
- * completion count. Called from test_clear_page_writeback().
- */
-static inline void __wb_writeout_inc(struct bdi_writeback *wb)
+static void wb_domain_writeout_inc(struct wb_domain *dom,
+				   struct fprop_local_percpu *completions,
+				   unsigned int max_prop_frac)
 {
-	struct wb_domain *dom = &global_wb_domain;
-
-	__inc_wb_stat(wb, WB_WRITTEN);
-	__fprop_inc_percpu_max(&dom->completions, &wb->completions,
-			       wb->bdi->max_prop_frac);
+	__fprop_inc_percpu_max(&dom->completions, completions,
+			       max_prop_frac);
 	/* First event after period switching was turned off? */
 	if (!unlikely(dom->period_time)) {
 		/*
@@ -469,6 +464,17 @@ static inline void __wb_writeout_inc(struct bdi_writeback *wb)
 	}
 }
 
+/*
+ * Increment @wb's writeout completion count and the global writeout
+ * completion count. Called from test_clear_page_writeback().
+ */
+static inline void __wb_writeout_inc(struct bdi_writeback *wb)
+{
+	__inc_wb_stat(wb, WB_WRITTEN);
+	wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
+			       wb->bdi->max_prop_frac);
+}
+
 void wb_writeout_inc(struct bdi_writeback *wb)
 {
 	unsigned long flags;
@@ -571,10 +577,9 @@ static unsigned long dirty_freerun_ceiling(unsigned long thresh,
 	return (thresh + bg_thresh) / 2;
 }
 
-static unsigned long hard_dirty_limit(unsigned long thresh)
+static unsigned long hard_dirty_limit(struct wb_domain *dom,
+				      unsigned long thresh)
 {
-	struct wb_domain *dom = &global_wb_domain;
-
 	return max(thresh, dom->dirty_limit);
 }
 
@@ -744,7 +749,7 @@ static void wb_position_ratio(struct dirty_throttle_control *dtc)
 	struct bdi_writeback *wb = dtc->wb;
 	unsigned long write_bw = wb->avg_write_bandwidth;
 	unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
-	unsigned long limit = hard_dirty_limit(dtc->thresh);
+	unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
 	unsigned long wb_thresh = dtc->wb_thresh;
 	unsigned long x_intercept;
 	unsigned long setpoint;		/* dirty pages' target balance point */
@@ -1029,7 +1034,7 @@ static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
 	struct bdi_writeback *wb = dtc->wb;
 	unsigned long dirty = dtc->dirty;
 	unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
-	unsigned long limit = hard_dirty_limit(dtc->thresh);
+	unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
 	unsigned long setpoint = (freerun + limit) / 2;
 	unsigned long write_bw = wb->avg_write_bandwidth;
 	unsigned long dirty_ratelimit = wb->dirty_ratelimit;
@@ -1681,7 +1686,7 @@ void throttle_vm_writeout(gfp_t gfp_mask)
 
         for ( ; ; ) {
 		global_dirty_limits(&background_thresh, &dirty_thresh);
-		dirty_thresh = hard_dirty_limit(dirty_thresh);
+		dirty_thresh = hard_dirty_limit(&global_wb_domain, dirty_thresh);
 
                 /*
                  * Boost the allowable dirty threshold a bit for page
-- 
2.1.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2015-03-23  5:08 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-23  5:07 [PATCHSET 2/3 block/for-4.1/core] writeback: cgroup writeback backpressure propagation Tejun Heo
2015-03-23  5:07 ` Tejun Heo
2015-03-23  5:07 ` [PATCH 01/18] memcg: make mem_cgroup_read_{stat|event}() iterate possible cpus instead of online Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-25 22:39   ` [PATCH 1.5/18] writeback: clean up wb_dirty_limit() Tejun Heo
2015-03-25 22:39     ` Tejun Heo
2015-03-25 22:39     ` Tejun Heo
2015-03-25 22:39     ` Tejun Heo
2015-03-23  5:07 ` [PATCH 02/18] writeback: reorganize [__]wb_update_bandwidth() Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 03/18] writeback: implement wb_domain Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 04/18] writeback: move global_dirty_limit into wb_domain Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 05/18] writeback: consolidate dirty throttle parameters into dirty_throttle_control Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 06/18] writeback: add dirty_throttle_control->wb_bg_thresh Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 07/18] writeback: make __wb_dirty_limit() take dirty_throttle_control Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-25 22:42   ` [PATCH v2 07/18] writeback: make __wb_calc_thresh() " Tejun Heo
2015-03-25 22:42     ` Tejun Heo
2015-03-25 22:42     ` Tejun Heo
2015-03-25 22:42     ` Tejun Heo
2015-03-23  5:07 ` [PATCH 08/18] writeback: add dirty_throttle_control->pos_ratio Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 09/18] writeback: add dirty_throttle_control->wb_completions Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 10/18] writeback: add dirty_throttle_control->dom Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` Tejun Heo [this message]
2015-03-23  5:07   ` [PATCH 11/18] writeback: make __wb_writeout_inc() and hard_dirty_limit() take wb_domaas a parameter Tejun Heo
2015-03-23  5:07 ` [PATCH 12/18] writeback: separate out domain_dirty_limits() Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 13/18] writeback: move over_bground_thresh() to mm/page-writeback.c Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 14/18] writeback: update wb_over_bg_thresh() to use wb_domain aware operations Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 15/18] writeback: implement memcg wb_domain Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 16/18] writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 17/18] writeback: implement memcg writeback domain based throttling Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:07 ` [PATCH 18/18] mm: vmscan: remove memcg stalling on writeback pages during direct reclaim Tejun Heo
2015-03-23  5:07   ` Tejun Heo
2015-03-23  5:27   ` Tejun Heo
2015-03-23  5:27     ` Tejun Heo
2015-03-25 22:26   ` [PATCH v2 18/18] mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use Tejun Heo
2015-03-25 22:26     ` Tejun Heo
2015-03-25 22:26     ` Tejun Heo
2015-03-25 22:26     ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427087267-16592-12-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=clm@fb.com \
    --cc=david@fromorbit.com \
    --cc=fengguang.wu@intel.com \
    --cc=gthelen@google.com \
    --cc=hannes@cmpxchg.org \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lizefan@huawei.com \
    --cc=mhocko@suse.cz \
    --cc=vgoyal@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.