* [PATCH] rtlwifi: rtl8192cu: Add new device ID
@ 2015-03-25 21:18 Marek Vasut
2015-03-26 0:50 ` Larry Finger
0 siblings, 1 reply; 9+ messages in thread
From: Marek Vasut @ 2015-03-25 21:18 UTC (permalink / raw)
To: linux-wireless
Cc: linux-kernel, Marek Vasut, Larry Finger, John W. Linville, Chaoming Li
Add new ID for ASUS N10 WiFi dongle.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
Bus 001 Device 004: ID 0b05:17ba ASUSTek Computer, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b05 ASUSTek Computer, Inc.
idProduct 0x17ba
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 90a714c..d451d2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -360,6 +360,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x04f2, 0xaffb, rtl92cu_hal_cfg)}, /*Xavi*/
{RTL_USB_DEVICE(0x04f2, 0xaffc, rtl92cu_hal_cfg)}, /*Xavi*/
{RTL_USB_DEVICE(0x2019, 0x1201, rtl92cu_hal_cfg)}, /*Planex-Vencer*/
+ {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
/****** 8192CU ********/
{RTL_USB_DEVICE(0x050d, 0x1004, rtl92cu_hal_cfg)}, /*Belcom-SurfN300*/
--
2.1.4
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
2015-03-25 21:18 [PATCH] rtlwifi: rtl8192cu: Add new device ID Marek Vasut
@ 2015-03-26 0:50 ` Larry Finger
2015-03-26 1:13 ` Marek Vasut
0 siblings, 1 reply; 9+ messages in thread
From: Larry Finger @ 2015-03-26 0:50 UTC (permalink / raw)
To: Marek Vasut, linux-wireless; +Cc: linux-kernel, John W. Linville, Chaoming Li
On 03/25/2015 04:18 PM, Marek Vasut wrote:
> Add new ID for ASUS N10 WiFi dongle.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: John W. Linville <linville@tuxdriver.com>
> Cc: Chaoming Li <chaoming_li@realsil.com.cn>
> ---
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> Bus 001 Device 004: ID 0b05:17ba ASUSTek Computer, Inc.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0b05 ASUSTek Computer, Inc.
> idProduct 0x17ba
> bcdDevice 2.00
> iManufacturer 1 Realtek
> iProduct 2 802.11n WLAN Adapter
> iSerial 3 00e04c000001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 90a714c..d451d2b 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -360,6 +360,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x04f2, 0xaffb, rtl92cu_hal_cfg)}, /*Xavi*/
> {RTL_USB_DEVICE(0x04f2, 0xaffc, rtl92cu_hal_cfg)}, /*Xavi*/
> {RTL_USB_DEVICE(0x2019, 0x1201, rtl92cu_hal_cfg)}, /*Planex-Vencer*/
> + {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
>
> /****** 8192CU ********/
> {RTL_USB_DEVICE(0x050d, 0x1004, rtl92cu_hal_cfg)}, /*Belcom-SurfN300*/
>
The full dump from lsusb is a bit much for a commit message. All you need is the
one line from lsusb with no switches set.
According to the Vendor driver, which the comment indicates as the source of
part of your patch, this particular device belongs in the "Customer ID" section
under 8188CU, not where you placed it. In addition, I like to keep the USB IDs
in numerical order within each section. Accordingly, your new ID should be
between 0846:9041 and 0bda:5088.
I am assuming that you have such a device. A statement that this change allows
it to work should be in the commit message. If you have not tested, then you
need to state that.
Larry
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
2015-03-26 0:50 ` Larry Finger
@ 2015-03-26 1:13 ` Marek Vasut
0 siblings, 0 replies; 9+ messages in thread
From: Marek Vasut @ 2015-03-26 1:13 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless, linux-kernel, John W. Linville, Chaoming Li
On Thursday, March 26, 2015 at 01:50:59 AM, Larry Finger wrote:
> On 03/25/2015 04:18 PM, Marek Vasut wrote:
> > Add new ID for ASUS N10 WiFi dongle.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Larry Finger <Larry.Finger@lwfinger.net>
> > Cc: John W. Linville <linville@tuxdriver.com>
> > Cc: Chaoming Li <chaoming_li@realsil.com.cn>
> > ---
> >
> > drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > Bus 001 Device 004: ID 0b05:17ba ASUSTek Computer, Inc.
> >
> > Device Descriptor:
> > bLength 18
> > bDescriptorType 1
> > bcdUSB 2.00
[...]
> > diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> > b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 90a714c..d451d2b
> > 100644
> > --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> > +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> > @@ -360,6 +360,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> >
> > {RTL_USB_DEVICE(0x04f2, 0xaffb, rtl92cu_hal_cfg)}, /*Xavi*/
> > {RTL_USB_DEVICE(0x04f2, 0xaffc, rtl92cu_hal_cfg)}, /*Xavi*/
> > {RTL_USB_DEVICE(0x2019, 0x1201, rtl92cu_hal_cfg)}, /*Planex-Vencer*/
> >
> > + {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
> >
> > /****** 8192CU ********/
> > {RTL_USB_DEVICE(0x050d, 0x1004, rtl92cu_hal_cfg)}, /*Belcom-SurfN300*/
Hi!
> The full dump from lsusb is a bit much for a commit message. All you need
> is the one line from lsusb with no switches set.
That's why I added it below the diffstat, so that it doesn't polute the commit
message.
> According to the Vendor driver, which the comment indicates as the source
> of part of your patch,
In fact, the comment came from that same source file, from 0b05:17ab line.
The vendor is the same though, so I kept the comment.
> this particular device belongs in the "Customer ID"
> section under 8188CU, not where you placed it. In addition, I like to keep
> the USB IDs in numerical order within each section. Accordingly, your new
> ID should be between 0846:9041 and 0bda:5088.
OK.
> I am assuming that you have such a device. A statement that this change
> allows it to work should be in the commit message. If you have not tested,
> then you need to state that.
I have one and I tested it, I mostly checked the other commit messages and
wrote the same thing. It's a rather mindless change afterall.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] rtlwifi: rtl8192cu: Add new device ID
@ 2015-08-19 13:51 Adrien Schildknecht
2015-08-19 14:12 ` Larry Finger
2015-08-19 14:42 ` Larry Finger
0 siblings, 2 replies; 9+ messages in thread
From: Adrien Schildknecht @ 2015-08-19 13:51 UTC (permalink / raw)
To: Larry.Finger, chaoming_li, kvalo, linville, marex, fzuuzf
Cc: linux-wireless, netdev, linux-kernel, Adrien Schildknecht
The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 23806c2..8b4238a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NetGear WNA1000Mv2*/
{RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
--
2.5.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
2015-08-19 13:51 Adrien Schildknecht
@ 2015-08-19 14:12 ` Larry Finger
2015-08-19 14:27 ` Adrien Schildknecht
2015-08-19 14:42 ` Larry Finger
1 sibling, 1 reply; 9+ messages in thread
From: Larry Finger @ 2015-08-19 14:12 UTC (permalink / raw)
To: Adrien Schildknecht, chaoming_li, kvalo, linville, marex, fzuuzf
Cc: linux-wireless, netdev, linux-kernel
On 08/19/2015 08:51 AM, Adrien Schildknecht wrote:
> The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
>
> Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
> ---
Has this ID been tested with the Netgear device?
Larry
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 23806c2..8b4238a 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
> {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
> {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
> + {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NetGear WNA1000Mv2*/
> {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
> {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
> {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
@ 2015-08-19 14:27 ` Adrien Schildknecht
0 siblings, 0 replies; 9+ messages in thread
From: Adrien Schildknecht @ 2015-08-19 14:27 UTC (permalink / raw)
To: Larry Finger
Cc: chaoming_li, kvalo, linville, marex, fzuuzf, linux-wireless,
netdev, linux-kernel
> Has this ID been tested with the Netgear device?
Yes, I have been using the device and the patch for 2 days.
--
Adrien Schildknecht
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
@ 2015-08-19 14:27 ` Adrien Schildknecht
0 siblings, 0 replies; 9+ messages in thread
From: Adrien Schildknecht @ 2015-08-19 14:27 UTC (permalink / raw)
To: Larry Finger
Cc: chaoming_li-kXabqFNEczNtrwSWzY7KCg, kvalo-sgV2jX0FEOL9JmXXK+q4OQ,
linville-2XuSBdqkA4R54TAoqtyWWQ, marex-ynQEQJNshbs,
fzuuzf-gM/Ye1E23mwN+BqQ9rBEUg,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
> Has this ID been tested with the Netgear device?
Yes, I have been using the device and the patch for 2 days.
--
Adrien Schildknecht
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID
2015-08-19 13:51 Adrien Schildknecht
2015-08-19 14:12 ` Larry Finger
@ 2015-08-19 14:42 ` Larry Finger
1 sibling, 0 replies; 9+ messages in thread
From: Larry Finger @ 2015-08-19 14:42 UTC (permalink / raw)
To: Adrien Schildknecht, chaoming_li, kvalo, linville, marex, fzuuzf
Cc: linux-wireless, netdev, linux-kernel
On 08/19/2015 08:51 AM, Adrien Schildknecht wrote:
> The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
>
> Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Add a "Cc: Stable <stable@vger.kernel.org>" line here. That way the new ID will
be available with older kernels.
The new line exceeds 80 characters. You might abbreviate Netgear as NG.
When you resubmit, do so as "[PATCH V2]".
Thanks,
Larry
> ---
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 23806c2..8b4238a 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
> {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
> {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
> + {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NetGear WNA1000Mv2*/
> {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
> {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
> {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] rtlwifi: rtl8192cu: Add new device ID
@ 2014-01-09 16:27 Larry Finger
0 siblings, 0 replies; 9+ messages in thread
From: Larry Finger @ 2014-01-09 16:27 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Larry Finger, netdev, Jan Prinsloo, Stable
Reported-by: Jan Prinsloo <janroot@gmail.com>
Tested-by: Jan Prinsloo <janroot@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 8501954..c613110 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -317,6 +317,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
--
1.8.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-08-19 14:42 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-25 21:18 [PATCH] rtlwifi: rtl8192cu: Add new device ID Marek Vasut
2015-03-26 0:50 ` Larry Finger
2015-03-26 1:13 ` Marek Vasut
-- strict thread matches above, loose matches on Subject: below --
2015-08-19 13:51 Adrien Schildknecht
2015-08-19 14:12 ` Larry Finger
2015-08-19 14:27 ` Adrien Schildknecht
2015-08-19 14:27 ` Adrien Schildknecht
2015-08-19 14:42 ` Larry Finger
2014-01-09 16:27 Larry Finger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.