[PATCH 09/21 v3] drm/i915: Add atomic function to setup scalers scalers for a crtc.

[Chandra Konduru <chandra.konduru@intel.com>]

intel_atomic_setup_scalers sets up scalers based on staged scaling
requests coming from a crtc and its planes. This function should be
called from crtc level check path.

If staged requests are supportable, function assigns scalers to
requested planes and crtc. This function also takes into account
the current planes using scalers but not being part of this
atomic state for optimal operation of scalers. Note that the scaler
assignement itself is staged into crtc_state and respective
plane_states for later commit after all checks have been done.

overall high level flow:
 - scaler requests are staged into crtc_state by planes/crtc
 - check whether staged scaling requests can be supported
 - add planes using scalers that aren't in current transaction
 - assign scalers to requested users
 - as part of plane commit, scalers will be committed
   (i.e., either attached or detached) to respective planes in hw
 - as part of crtc_commit, scaler will be either attached or detached
   to crtc in hw

v2:
-removed a log message (me)
-changed input parameter to crtc_state (me)

v3:
-remove assigning plane_state returned by drm_atomic_get_plane_state (Matt)
-fail if there is an error from drm_atomic_get_plane_state (Matt)

Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
---
 drivers/gpu/drm/i915/intel_atomic.c |  142 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h    |    3 +
 2 files changed, 145 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 3903b90..fab1f13 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -241,3 +241,145 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
 {
 	drm_atomic_helper_crtc_destroy_state(crtc, state);
 }
+
+/**
+ * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
+ * @dev: DRM device
+ * @crtc: intel crtc
+ * @crtc_state: incoming crtc_state to validate and setup scalers
+ *
+ * This function sets up scalers based on staged scaling requests for
+ * a @crtc and its planes. It is called from crtc level check path. If request
+ * is a supportable request, it attaches scalers to requested planes and crtc.
+ *
+ * This function takes into account the current scaler(s) in use by any planes
+ * not being part of this atomic state
+ *
+ *  Returns:
+ *         0 - scalers were setup succesfully
+ *         error code - otherwise
+ */
+int intel_atomic_setup_scalers(struct drm_device *dev,
+	struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state)
+{
+	struct drm_plane *plane = NULL;
+	struct intel_plane *intel_plane;
+	struct intel_plane_state *plane_state = NULL;
+	struct intel_crtc_scaler_state *scaler_state;
+	struct drm_atomic_state *drm_state;
+	int num_scalers_need;
+	int i, j;
+
+	if (INTEL_INFO(dev)->gen < 9 || !intel_crtc || !crtc_state)
+		return 0;
+
+	scaler_state = &crtc_state->scaler_state;
+	drm_state = crtc_state->base.state;
+
+	num_scalers_need = hweight32(scaler_state->scaler_users);
+	DRM_DEBUG_KMS("crtc_state = %p need = %d avail = %d scaler_users = 0x%x\n",
+		crtc_state, num_scalers_need, scaler_state->num_scalers,
+		scaler_state->scaler_users);
+
+	/* if there is no change in scaler configuration, return */
+	if (scaler_state->scaler_users ==
+		intel_crtc->config->scaler_state.scaler_users)
+		return 0;
+
+	/*
+	 * High level flow:
+	 * - staged scaler requests are already in scaler_state->scaler_users
+	 * - check whether staged scaling requests can be supported
+	 * - add planes using scalers that aren't in current transaction
+	 * - assign scalers to requested users
+	 * - as part of plane commit, scalers will be committed
+	 *   (i.e., either attached or detached) to respective planes in hw
+	 * - as part of crtc_commit, scaler will be either attached or detached
+	 *   to crtc in hw
+	 */
+
+	/* fail if required scalers > available scalers */
+	if (num_scalers_need > scaler_state->num_scalers){
+		DRM_DEBUG_KMS("Too many scaling requests %d > %d\n",
+			num_scalers_need, scaler_state->num_scalers);
+		return -EINVAL;
+	}
+
+	/* walkthrough scaler_users bits and start assigning scalers */
+	for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
+		int *scaler_id;
+
+		/* skip if scaler not required */
+		if (!(scaler_state->scaler_users & (1 << i)))
+			continue;
+
+		if (i == SKL_CRTC_INDEX) {
+			/* panel fitter case: assign as a crtc scaler */
+			scaler_id = &scaler_state->scaler_id;
+		} else {
+			if (!drm_state)
+				continue;
+
+			/* plane scaler case: assign as a plane scaler */
+			/* find the plane that set the bit as scaler_user */
+			plane = drm_state->planes[i];
+
+			/*
+			 * to enable/disable hq mode, add planes that are using scaler
+			 * into this transaction
+			 */
+			if (!plane) {
+				struct drm_plane_state *state;
+				plane = drm_plane_from_index(dev, i);
+				state = drm_atomic_get_plane_state(drm_state, plane);
+				if (IS_ERR(state)) {
+					DRM_DEBUG_KMS("Failed to add [PLANE:%d] to drm_state\n",
+						plane->base.id);
+					return PTR_ERR(state);
+				}
+			}
+
+			intel_plane = to_intel_plane(plane);
+
+			/* plane on different crtc cannot be a scaler user of this crtc */
+			if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
+				continue;
+			}
+
+			plane_state = to_intel_plane_state(drm_state->plane_states[i]);
+			scaler_id = &plane_state->scaler_id;
+		}
+
+		if (*scaler_id < 0) {
+			/* find a free scaler */
+			for (j = 0; j < scaler_state->num_scalers; j++) {
+				if (!scaler_state->scalers[j].in_use) {
+					scaler_state->scalers[j].in_use = 1;
+					*scaler_id = scaler_state->scalers[j].id;
+					DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
+						intel_crtc->pipe,
+						i == SKL_CRTC_INDEX ? scaler_state->scaler_id :
+							plane_state->scaler_id,
+						i == SKL_CRTC_INDEX ? "CRTC" : "PLANE",
+						i == SKL_CRTC_INDEX ?  intel_crtc->base.base.id :
+						plane->base.id);
+					break;
+				}
+			}
+		}
+
+		if (WARN_ON(*scaler_id < 0)) {
+			DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n",
+				i == SKL_CRTC_INDEX ? "CRTC" : "PLANE",
+				i == SKL_CRTC_INDEX ? intel_crtc->base.base.id:plane->base.id);
+			continue;
+		}
+
+		/* set scaler mode */
+		scaler_state->scalers[*scaler_id].mode = (num_scalers_need == 1) ?
+			PS_SCALER_MODE_HQ : PS_SCALER_MODE_DYN;
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f5d53c9..a9d787d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1401,6 +1401,9 @@ intel_atomic_get_crtc_state(struct drm_atomic_state *state,
 
 	return to_intel_crtc_state(crtc_state);
 }
+int intel_atomic_setup_scalers(struct drm_device *dev,
+	struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state);
 
 /* intel_atomic_plane.c */
 struct intel_plane_state *intel_create_plane_state(struct drm_plane *plane);
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx