[Qemu-devel] [RFC PATCH v4 09/28] COLO: Save VM state to slave when do checkpoint

[zhanghailiang <zhang.zhanghailiang@huawei.com>]

We should save PVM's RAM/device to slave when needed.

For VM state, we  will cache them in slave, we use QEMUSizedBuffer
to store the data, we need know the data size of VM state, so in master,
we use qsb to store VM state temporarily, and then migrate the data to
slave.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
 arch_init.c      | 22 ++++++++++++++++++--
 migration/colo.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
 savevm.c         |  2 +-
 3 files changed, 79 insertions(+), 7 deletions(-)

diff --git a/arch_init.c b/arch_init.c
index fcfa328..e928e11 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -53,6 +53,7 @@
 #include "hw/acpi/acpi.h"
 #include "qemu/host-utils.h"
 #include "qemu/rcu_queue.h"
+#include "migration/migration-colo.h"
 
 #ifdef DEBUG_ARCH_INIT
 #define DPRINTF(fmt, ...) \
@@ -845,6 +846,13 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
     RAMBlock *block;
     int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
 
+    /*
+     * migration has already setup the bitmap, reuse it.
+     */
+    if (migrate_in_colo_state()) {
+        goto setup_part;
+    }
+
     mig_throttle_on = false;
     dirty_rate_high_cnt = 0;
     bitmap_sync_count = 0;
@@ -901,9 +909,12 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
     migration_bitmap_sync();
     qemu_mutex_unlock_ramlist();
     qemu_mutex_unlock_iothread();
-
+setup_part:
     qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
 
+    if (migrate_in_colo_state()) {
+        rcu_read_lock();
+    }
     QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
         qemu_put_byte(f, strlen(block->idstr));
         qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
@@ -1007,7 +1018,14 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
     }
 
     ram_control_after_iterate(f, RAM_CONTROL_FINISH);
-    migration_end();
+
+    /*
+     * Since we need to reuse dirty bitmap in colo,
+     * don't cleanup the bitmap.
+     */
+    if (!migrate_enable_colo() || migration_has_failed(migrate_get_current())) {
+        migration_end();
+    }
 
     rcu_read_unlock();
     qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
diff --git a/migration/colo.c b/migration/colo.c
index 5a8ed1b..64e3f3a 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -60,6 +60,9 @@ enum {
 
 static QEMUBH *colo_bh;
 static Coroutine *colo;
+/* colo buffer */
+#define COLO_BUFFER_BASE_SIZE (1000*1000*4ULL)
+QEMUSizedBuffer *colo_buffer;
 
 bool colo_supported(void)
 {
@@ -123,6 +126,8 @@ static int colo_ctl_get(QEMUFile *f, uint64_t require)
 static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
 {
     int ret;
+    size_t size;
+    QEMUFile *trans = NULL;
 
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_NEW);
     if (ret < 0) {
@@ -133,16 +138,47 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
     if (ret < 0) {
         goto out;
     }
+    /* Reset colo buffer and open it for write */
+    qsb_set_length(colo_buffer, 0);
+    trans = qemu_bufopen("w", colo_buffer);
+    if (!trans) {
+        error_report("Open colo buffer for write failed");
+        goto out;
+    }
+
+    /* suspend and save vm state to colo buffer */
+    qemu_mutex_lock_iothread();
+    vm_stop_force_state(RUN_STATE_COLO);
+    qemu_mutex_unlock_iothread();
+    DPRINTF("vm is stoped\n");
+
+    /* Disable block migration */
+    s->params.blk = 0;
+    s->params.shared = 0;
+    qemu_savevm_state_begin(trans, &s->params);
+    qemu_mutex_lock_iothread();
+    qemu_savevm_state_complete(trans);
+    qemu_mutex_unlock_iothread();
 
-    /* TODO: suspend and save vm state to colo buffer */
+    qemu_fflush(trans);
 
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_SEND);
     if (ret < 0) {
         goto out;
     }
+    /* we send the total size of the vmstate first */
+    size = qsb_get_length(colo_buffer);
+    ret = colo_ctl_put(s->file, size);
+    if (ret < 0) {
+        goto out;
+    }
 
-    /* TODO: send vmstate to slave */
-
+    qsb_put_buffer(s->file, colo_buffer, size);
+    qemu_fflush(s->file);
+    ret = qemu_file_get_error(s->file);
+    if (ret < 0) {
+        goto out;
+    }
     ret = colo_ctl_get(control, COLO_CHECKPOINT_RECEIVED);
     if (ret < 0) {
         goto out;
@@ -154,9 +190,18 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
     }
     DPRINTF("got COLO_CHECKPOINT_LOADED\n");
 
-    /* TODO: resume master */
+    ret = 0;
+    /* resume master */
+    qemu_mutex_lock_iothread();
+    vm_start();
+    qemu_mutex_unlock_iothread();
+    DPRINTF("vm resume to run again\n");
 
 out:
+    if (trans) {
+        qemu_fclose(trans);
+    }
+
     return ret;
 }
 
@@ -182,6 +227,12 @@ static void *colo_thread(void *opaque)
     }
     DPRINTF("get COLO_READY\n");
 
+    colo_buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
+    if (colo_buffer == NULL) {
+        error_report("Failed to allocate colo buffer!");
+        goto out;
+    }
+
     qemu_mutex_lock_iothread();
     vm_start();
     qemu_mutex_unlock_iothread();
@@ -197,6 +248,9 @@ static void *colo_thread(void *opaque)
 out:
     migrate_set_state(s, MIGRATION_STATUS_COLO, MIGRATION_STATUS_COMPLETED);
 
+    qsb_free(colo_buffer);
+    colo_buffer = NULL;
+
     if (colo_control) {
         qemu_fclose(colo_control);
     }
diff --git a/savevm.c b/savevm.c
index 3b0e222..cd7ec27 100644
--- a/savevm.c
+++ b/savevm.c
@@ -42,7 +42,7 @@
 #include "qemu/iov.h"
 #include "block/snapshot.h"
 #include "block/qapi.h"
-
+#include "migration/migration-colo.h"
 
 #ifndef ETH_P_RARP
 #define ETH_P_RARP 0x8035
-- 
1.7.12.4