All of lore.kernel.org
 help / color / mirror / Atom feed
From: zhanghailiang <zhang.zhanghailiang@huawei.com>
To: qemu-devel@nongnu.org
Cc: lizhijian@cn.fujitsu.com, quintela@redhat.com,
	yunhong.jiang@intel.com, eddie.dong@intel.com,
	peter.huangpeng@huawei.com, dgilbert@redhat.com,
	zhanghailiang <zhang.zhanghailiang@huawei.com>,
	arei.gonglei@huawei.com, amit.shah@redhat.com,
	Yang Hongyang <yanghy@cn.fujitsu.com>,
	david@gibson.dropbear.id.au
Subject: [Qemu-devel] [RFC PATCH v4 28/28] COLO: Add block replication into colo process
Date: Thu, 26 Mar 2015 13:29:34 +0800	[thread overview]
Message-ID: <1427347774-8960-29-git-send-email-zhang.zhanghailiang@huawei.com> (raw)
In-Reply-To: <1427347774-8960-1-git-send-email-zhang.zhanghailiang@huawei.com>

From: Wen Congyang <wency@cn.fujitsu.com>

Make sure master start block replication after slave's block replication started

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
 migration/colo.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 118 insertions(+), 2 deletions(-)

diff --git a/migration/colo.c b/migration/colo.c
index 894bf5f..d70f80b 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -18,6 +18,8 @@
 #include "migration/migration-failover.h"
 #include "net/colo-nic.h"
 #include "qmp-commands.h"
+#include "block/block.h"
+#include "sysemu/block-backend.h"
 
 #define DEBUG_COLO 0
 
@@ -110,6 +112,68 @@ static bool colo_runstate_is_stopped(void)
     return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
 }
 
+static void blk_start_replication(bool primary, Error **errp)
+{
+    int mode = primary ? COLO_MODE_PRIMARY : COLO_MODE_SECONDARY;
+    BlockBackend *blk, *temp;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_start_replication(blk_bs(blk), mode, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            goto fail;
+        }
+    }
+
+    return;
+
+fail:
+    for (temp = blk_next(NULL); temp != blk; temp = blk_next(temp)) {
+        bdrv_stop_replication(blk_bs(temp), NULL);
+    }
+}
+
+static void blk_do_checkpoint(Error **errp)
+{
+    BlockBackend *blk;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_do_checkpoint(blk_bs(blk), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+}
+
+static void blk_stop_replication(Error **errp)
+{
+    BlockBackend *blk;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_stop_replication(blk_bs(blk), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+}
+
 /*
  * there are two way to entry this function
  * 1. From colo checkpoint incoming thread, in this case
@@ -120,6 +184,8 @@ static bool colo_runstate_is_stopped(void)
  */
 static void slave_do_failover(void)
 {
+    Error *local_err = NULL;
+
     /* Wait for incoming thread loading vmstate */
     while (vmstate_loading) {
         ;
@@ -129,6 +195,10 @@ static void slave_do_failover(void)
         error_report("colo proxy failed to do failover");
     }
     colo_proxy_destroy(COLO_SECONDARY_MODE);
+    blk_stop_replication(&local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
 
     colo = NULL;
 
@@ -147,6 +217,7 @@ static void slave_do_failover(void)
 static void master_do_failover(void)
 {
     MigrationState *s = migrate_get_current();
+    Error *local_err = NULL;
 
     if (!colo_runstate_is_stopped()) {
         vm_stop_force_state(RUN_STATE_COLO);
@@ -158,6 +229,11 @@ static void master_do_failover(void)
         migrate_set_state(s, MIGRATION_STATUS_COLO, MIGRATION_STATUS_COMPLETED);
     }
 
+    blk_stop_replication(&local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+
     vm_start();
 }
 
@@ -231,6 +307,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
     int ret;
     size_t size;
     QEMUFile *trans = NULL;
+    Error *local_err = NULL;
 
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_NEW);
     if (ret < 0) {
@@ -282,6 +359,16 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
         goto out;
     }
 
+    /* we call this api although this may do nothing on primary side */
+    qemu_mutex_lock_iothread();
+    blk_do_checkpoint(&local_err);
+    qemu_mutex_unlock_iothread();
+    if (local_err) {
+        error_report_err(local_err);
+        ret = -1;
+        goto out;
+    }
+
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_SEND);
     if (ret < 0) {
         goto out;
@@ -339,6 +426,7 @@ static void *colo_thread(void *opaque)
     QEMUFile *colo_control = NULL;
     int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
     int ret;
+    Error *local_err = NULL;
 
     if (colo_proxy_init(COLO_PRIMARY_MODE) != 0) {
         error_report("Init colo proxy error");
@@ -370,6 +458,12 @@ static void *colo_thread(void *opaque)
         goto out;
     }
 
+    /* start block replication */
+    blk_start_replication(true, &local_err);
+    if (local_err) {
+        goto out;
+    }
+
     qemu_mutex_lock_iothread();
     vm_start();
     qemu_mutex_unlock_iothread();
@@ -414,7 +508,11 @@ do_checkpoint:
     }
 
 out:
-    error_report("colo: some error happens in colo_thread");
+    if (local_err) {
+        error_report_err(local_err);
+    } else {
+        error_report("colo: some error happens in colo_thread");
+    }
     qemu_mutex_lock_iothread();
     if (!failover_request_is_set()) {
         error_report("master takeover from checkpoint channel");
@@ -516,6 +614,7 @@ void *colo_process_incoming_checkpoints(void *opaque)
     QEMUFile *ctl = NULL, *fb = NULL;
     int ret;
     uint64_t total_size;
+    Error *local_err = NULL;
 
     qdev_hotplug = 0;
 
@@ -543,6 +642,13 @@ void *colo_process_incoming_checkpoints(void *opaque)
         goto out;
     }
 
+    /* start block replication */
+    blk_start_replication(false, &local_err);
+    if (local_err) {
+        goto out;
+    }
+    DPRINTF("finish block replication\n");
+
     ret = colo_ctl_put(ctl, COLO_READY);
     if (ret < 0) {
         goto out;
@@ -627,7 +733,13 @@ void *colo_process_incoming_checkpoints(void *opaque)
         }
         DPRINTF("Finish load all vm state to cache\n");
         vmstate_loading = false;
+
+        /* discard colo disk buffer */
+        blk_do_checkpoint(&local_err);
         qemu_mutex_unlock_iothread();
+        if (local_err) {
+            goto out;
+        }
 
         ret = colo_ctl_put(ctl, COLO_CHECKPOINT_LOADED);
         if (ret < 0) {
@@ -645,7 +757,11 @@ void *colo_process_incoming_checkpoints(void *opaque)
     }
 
 out:
-    error_report("Detect some error or get a failover request");
+    if (local_err) {
+        error_report_err(local_err);
+    } else {
+        error_report("Detect some error or get a failover request");
+    }
     /* determine whether we need to failover */
     if (!failover_request_is_set()) {
         /*
-- 
1.7.12.4

  parent reply	other threads:[~2015-03-26  5:32 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-26  5:29 [Qemu-devel] [RFC PATCH v4 00/28] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 01/28] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 02/28] migration: Introduce capability 'colo' to migration zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 03/28] COLO: migrate colo related info to slave zhanghailiang
2015-05-15 11:38   ` Dr. David Alan Gilbert
2015-05-18  5:04     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 04/28] migration: Integrate COLO checkpoint process into migration zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 05/28] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 06/28] COLO: Implement colo checkpoint protocol zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 07/28] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
2015-05-15 11:28   ` Dr. David Alan Gilbert
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 08/28] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
2015-05-15 11:56   ` Dr. David Alan Gilbert
2015-05-18  5:10     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 09/28] COLO: Save VM state to slave when do checkpoint zhanghailiang
2015-05-15 12:09   ` Dr. David Alan Gilbert
2015-05-18  9:11     ` zhanghailiang
2015-05-18 12:10       ` Dr. David Alan Gilbert
2015-05-18 12:22         ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 10/28] COLO RAM: Load PVM's dirty page into SVM's RAM cache temporarily zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 11/28] COLO VMstate: Load VM state into qsb before restore it zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 12/28] arch_init: Start to trace dirty pages of SVM zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 13/28] COLO RAM: Flush cached RAM into SVM's memory zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 14/28] COLO failover: Introduce a new command to trigger a failover zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 15/28] COLO failover: Implement COLO master/slave failover work zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 16/28] COLO failover: Don't do failover during loading VM's state zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 17/28] COLO: Add new command parameter 'colo_nicname' 'colo_script' for net zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 18/28] COLO NIC: Init/remove colo nic devices when add/cleanup tap devices zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 19/28] COLO NIC: Implement colo nic device interface configure() zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 20/28] COLO NIC : Implement colo nic init/destroy function zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 21/28] COLO NIC: Some init work related with proxy module zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 22/28] COLO: Do checkpoint according to the result of net packets comparing zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 23/28] COLO: Improve checkpoint efficiency by do additional periodic checkpoint zhanghailiang
2015-05-18 16:48   ` Dr. David Alan Gilbert
2015-05-19  6:08     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 24/28] COLO: Add colo-set-checkpoint-period command zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 25/28] COLO NIC: Implement NIC checkpoint and failover zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 26/28] COLO: Disable qdev hotplug when VM is in COLO mode zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 27/28] COLO: Implement shutdown checkpoint zhanghailiang
2015-03-26  5:29 ` zhanghailiang [this message]
2015-04-08  8:16 ` [Qemu-devel] [RFC PATCH v4 00/28] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service zhanghailiang
2015-04-22 11:18   ` Dr. David Alan Gilbert
2015-04-24  7:25     ` Wen Congyang
2015-04-24  8:35       ` Dr. David Alan Gilbert
2015-04-28 10:51         ` zhanghailiang
2015-05-06 17:11           ` Dr. David Alan Gilbert
2015-04-24  8:52     ` zhanghailiang
2015-04-24  8:56       ` Dr. David Alan Gilbert
2015-05-14 12:14 ` Dr. David Alan Gilbert
2015-05-14 12:58   ` zhanghailiang
2015-05-14 16:09     ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427347774-8960-29-git-send-email-zhang.zhanghailiang@huawei.com \
    --to=zhang.zhanghailiang@huawei.com \
    --cc=amit.shah@redhat.com \
    --cc=arei.gonglei@huawei.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=dgilbert@redhat.com \
    --cc=eddie.dong@intel.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=peter.huangpeng@huawei.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=yanghy@cn.fujitsu.com \
    --cc=yunhong.jiang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.