* [Qemu-devel] [PATCH v3 0/6] virtio: add input device
@ 2015-03-26 11:26 Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 1/6] pci: add PCI_CLASS_INPUT_* Gerd Hoffmann
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
This patch series adds virtio input devices. It's basically sending
linux evdev events over virtio. There is support for emulated hid
devices (i.e. send usual input to virtio device instead of usb or ps2
device) and for evdev device pass-through.
This depends on mst's virtio-1.0 patches.
Changes in v3:
* sync header with v5 of the kernel driver patch.
[ there was a abi change, testing this series requires v5 of the
kernel patch, the branch below is up-to-date too ]
* minor tweaks.
Changes in v2:
* sync header files from linux & use them.
* added virtio_input_devids struct, pass device ids from host
(requested on guest driver review).
Guest driver:
https://www.kraxel.org/cgit/linux/log/?h=virtio-input
Specification (slightly outdated, latest changes from kernel driver
review not added yet):
https://www.kraxel.org/cgit/virtio-spec/log/?h=virtio-input
https://www.kraxel.org/virtio/virtio-v1.0-csprd03-virtio-input.html#x1-2640007
Gerd Hoffmann (6):
pci: add PCI_CLASS_INPUT_*
virtio-input: add virtio_input.h
virtio-input: add linux/input.h
virtio-input: core code & base class
virtio-input: emulated devices
virtio-input: evdev passthrough
hw/input/Makefile.objs | 6 +
hw/input/virtio-input-hid.c | 502 +++++++++++
hw/input/virtio-input-host.c | 182 ++++
hw/input/virtio-input.c | 282 ++++++
hw/virtio/virtio-pci.c | 150 ++++
hw/virtio/virtio-pci.h | 37 +
include/hw/pci/pci_ids.h | 7 +
include/hw/virtio/virtio-input.h | 118 +++
include/hw/virtio/virtio.h | 1 +
include/standard-headers/linux/input.h | 1198 +++++++++++++++++++++++++
include/standard-headers/linux/virtio_ids.h | 1 +
include/standard-headers/linux/virtio_input.h | 76 ++
scripts/update-linux-headers.sh | 4 +-
13 files changed, 2563 insertions(+), 1 deletion(-)
create mode 100644 hw/input/virtio-input-hid.c
create mode 100644 hw/input/virtio-input-host.c
create mode 100644 hw/input/virtio-input.c
create mode 100644 include/hw/virtio/virtio-input.h
create mode 100644 include/standard-headers/linux/input.h
create mode 100644 include/standard-headers/linux/virtio_input.h
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 1/6] pci: add PCI_CLASS_INPUT_*
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 2/6] virtio-input: add virtio_input.h Gerd Hoffmann
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/hw/pci/pci_ids.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index d7be386..dfccefc 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -46,6 +46,13 @@
#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
+#define PCI_CLASS_INPUT_KEYBOARD 0x0900
+#define PCI_CLASS_INPUT_PEN 0x0901
+#define PCI_CLASS_INPUT_MOUSE 0x0902
+#define PCI_CLASS_INPUT_SCANNER 0x0903
+#define PCI_CLASS_INPUT_GAMEPORT 0x0904
+#define PCI_CLASS_INPUT_OTHER 0x0980
+
#define PCI_CLASS_PROCESSOR_CO 0x0b40
#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 2/6] virtio-input: add virtio_input.h
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 1/6] pci: add PCI_CLASS_INPUT_* Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 3/6] virtio-input: add linux/input.h Gerd Hoffmann
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
Using scripts/update-linux-headers.sh with linux-input kernel branch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/standard-headers/linux/virtio_ids.h | 1 +
include/standard-headers/linux/virtio_input.h | 76 +++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 include/standard-headers/linux/virtio_input.h
diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
index 284fc3a..5f60aa4 100644
--- a/include/standard-headers/linux/virtio_ids.h
+++ b/include/standard-headers/linux/virtio_ids.h
@@ -39,5 +39,6 @@
#define VIRTIO_ID_9P 9 /* 9p virtio console */
#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */
#define VIRTIO_ID_CAIF 12 /* Virtio caif */
+#define VIRTIO_ID_INPUT 18 /* virtio input */
#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/standard-headers/linux/virtio_input.h b/include/standard-headers/linux/virtio_input.h
new file mode 100644
index 0000000..a98a797
--- /dev/null
+++ b/include/standard-headers/linux/virtio_input.h
@@ -0,0 +1,76 @@
+#ifndef _LINUX_VIRTIO_INPUT_H
+#define _LINUX_VIRTIO_INPUT_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+#include "standard-headers/linux/types.h"
+
+enum virtio_input_config_select {
+ VIRTIO_INPUT_CFG_UNSET = 0x00,
+ VIRTIO_INPUT_CFG_ID_NAME = 0x01,
+ VIRTIO_INPUT_CFG_ID_SERIAL = 0x02,
+ VIRTIO_INPUT_CFG_ID_DEVIDS = 0x03,
+ VIRTIO_INPUT_CFG_PROP_BITS = 0x10,
+ VIRTIO_INPUT_CFG_EV_BITS = 0x11,
+ VIRTIO_INPUT_CFG_ABS_INFO = 0x12,
+};
+
+struct virtio_input_absinfo {
+ uint32_t min;
+ uint32_t max;
+ uint32_t fuzz;
+ uint32_t flat;
+ uint32_t res;
+};
+
+struct virtio_input_devids {
+ uint16_t bustype;
+ uint16_t vendor;
+ uint16_t product;
+ uint16_t version;
+};
+
+struct virtio_input_config {
+ uint8_t select;
+ uint8_t subsel;
+ uint8_t size;
+ uint8_t reserved[5];
+ union {
+ char string[128];
+ uint8_t bitmap[128];
+ struct virtio_input_absinfo abs;
+ struct virtio_input_devids ids;
+ } u;
+};
+
+struct virtio_input_event {
+ uint16_t type;
+ uint16_t code;
+ uint32_t value;
+};
+
+#endif /* _LINUX_VIRTIO_INPUT_H */
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 3/6] virtio-input: add linux/input.h
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 1/6] pci: add PCI_CLASS_INPUT_* Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 2/6] virtio-input: add virtio_input.h Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 4/6] virtio-input: core code & base class Gerd Hoffmann
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
Linux input layer (evdev) header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/standard-headers/linux/input.h | 1198 ++++++++++++++++++++++++++++++++
| 4 +-
2 files changed, 1201 insertions(+), 1 deletion(-)
create mode 100644 include/standard-headers/linux/input.h
diff --git a/include/standard-headers/linux/input.h b/include/standard-headers/linux/input.h
new file mode 100644
index 0000000..b94d365
--- /dev/null
+++ b/include/standard-headers/linux/input.h
@@ -0,0 +1,1198 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _INPUT_H
+#define _INPUT_H
+
+
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include "standard-headers/linux/types.h"
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+ struct timeval time;
+ uint16_t type;
+ uint16_t code;
+ int32_t value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION 0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+ uint16_t bustype;
+ uint16_t vendor;
+ uint16_t product;
+ uint16_t version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+ int32_t value;
+ int32_t minimum;
+ int32_t maximum;
+ int32_t fuzz;
+ int32_t flat;
+ int32_t resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ * should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX (1 << 0)
+ uint8_t flags;
+ uint8_t len;
+ uint16_t index;
+ uint32_t keycode;
+ uint8_t scancode[32];
+};
+
+#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
+#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
+#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
+#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
+
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
+#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
+#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
+#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ * uint32_t code;
+ * int32_t values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(int32_t). If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
+#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
+#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
+#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
+
+#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
+#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
+#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
+
+#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
+#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
+#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
+
+#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
+#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */
+
+#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
+#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
+#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
+#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
+#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
+#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
+
+#define INPUT_PROP_MAX 0x1f
+#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN 0x00
+#define EV_KEY 0x01
+#define EV_REL 0x02
+#define EV_ABS 0x03
+#define EV_MSC 0x04
+#define EV_SW 0x05
+#define EV_LED 0x11
+#define EV_SND 0x12
+#define EV_REP 0x14
+#define EV_FF 0x15
+#define EV_PWR 0x16
+#define EV_FF_STATUS 0x17
+#define EV_MAX 0x1f
+#define EV_CNT (EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT 0
+#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
+#define SYN_DROPPED 3
+#define SYN_MAX 0xf
+#define SYN_CNT (SYN_MAX+1)
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED 0
+#define KEY_ESC 1
+#define KEY_1 2
+#define KEY_2 3
+#define KEY_3 4
+#define KEY_4 5
+#define KEY_5 6
+#define KEY_6 7
+#define KEY_7 8
+#define KEY_8 9
+#define KEY_9 10
+#define KEY_0 11
+#define KEY_MINUS 12
+#define KEY_EQUAL 13
+#define KEY_BACKSPACE 14
+#define KEY_TAB 15
+#define KEY_Q 16
+#define KEY_W 17
+#define KEY_E 18
+#define KEY_R 19
+#define KEY_T 20
+#define KEY_Y 21
+#define KEY_U 22
+#define KEY_I 23
+#define KEY_O 24
+#define KEY_P 25
+#define KEY_LEFTBRACE 26
+#define KEY_RIGHTBRACE 27
+#define KEY_ENTER 28
+#define KEY_LEFTCTRL 29
+#define KEY_A 30
+#define KEY_S 31
+#define KEY_D 32
+#define KEY_F 33
+#define KEY_G 34
+#define KEY_H 35
+#define KEY_J 36
+#define KEY_K 37
+#define KEY_L 38
+#define KEY_SEMICOLON 39
+#define KEY_APOSTROPHE 40
+#define KEY_GRAVE 41
+#define KEY_LEFTSHIFT 42
+#define KEY_BACKSLASH 43
+#define KEY_Z 44
+#define KEY_X 45
+#define KEY_C 46
+#define KEY_V 47
+#define KEY_B 48
+#define KEY_N 49
+#define KEY_M 50
+#define KEY_COMMA 51
+#define KEY_DOT 52
+#define KEY_SLASH 53
+#define KEY_RIGHTSHIFT 54
+#define KEY_KPASTERISK 55
+#define KEY_LEFTALT 56
+#define KEY_SPACE 57
+#define KEY_CAPSLOCK 58
+#define KEY_F1 59
+#define KEY_F2 60
+#define KEY_F3 61
+#define KEY_F4 62
+#define KEY_F5 63
+#define KEY_F6 64
+#define KEY_F7 65
+#define KEY_F8 66
+#define KEY_F9 67
+#define KEY_F10 68
+#define KEY_NUMLOCK 69
+#define KEY_SCROLLLOCK 70
+#define KEY_KP7 71
+#define KEY_KP8 72
+#define KEY_KP9 73
+#define KEY_KPMINUS 74
+#define KEY_KP4 75
+#define KEY_KP5 76
+#define KEY_KP6 77
+#define KEY_KPPLUS 78
+#define KEY_KP1 79
+#define KEY_KP2 80
+#define KEY_KP3 81
+#define KEY_KP0 82
+#define KEY_KPDOT 83
+
+#define KEY_ZENKAKUHANKAKU 85
+#define KEY_102ND 86
+#define KEY_F11 87
+#define KEY_F12 88
+#define KEY_RO 89
+#define KEY_KATAKANA 90
+#define KEY_HIRAGANA 91
+#define KEY_HENKAN 92
+#define KEY_KATAKANAHIRAGANA 93
+#define KEY_MUHENKAN 94
+#define KEY_KPJPCOMMA 95
+#define KEY_KPENTER 96
+#define KEY_RIGHTCTRL 97
+#define KEY_KPSLASH 98
+#define KEY_SYSRQ 99
+#define KEY_RIGHTALT 100
+#define KEY_LINEFEED 101
+#define KEY_HOME 102
+#define KEY_UP 103
+#define KEY_PAGEUP 104
+#define KEY_LEFT 105
+#define KEY_RIGHT 106
+#define KEY_END 107
+#define KEY_DOWN 108
+#define KEY_PAGEDOWN 109
+#define KEY_INSERT 110
+#define KEY_DELETE 111
+#define KEY_MACRO 112
+#define KEY_MUTE 113
+#define KEY_VOLUMEDOWN 114
+#define KEY_VOLUMEUP 115
+#define KEY_POWER 116 /* SC System Power Down */
+#define KEY_KPEQUAL 117
+#define KEY_KPPLUSMINUS 118
+#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA 121
+#define KEY_HANGEUL 122
+#define KEY_HANGUEL KEY_HANGEUL
+#define KEY_HANJA 123
+#define KEY_YEN 124
+#define KEY_LEFTMETA 125
+#define KEY_RIGHTMETA 126
+#define KEY_COMPOSE 127
+
+#define KEY_STOP 128 /* AC Stop */
+#define KEY_AGAIN 129
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
+#define KEY_FRONT 132
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
+#define KEY_SETUP 141
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
+#define KEY_SENDFILE 145
+#define KEY_DELETEFILE 146
+#define KEY_XFER 147
+#define KEY_PROG1 148
+#define KEY_PROG2 149
+#define KEY_WWW 150 /* AL Internet Browser */
+#define KEY_MSDOS 151
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
+#define KEY_DIRECTION 153
+#define KEY_CYCLEWINDOWS 154
+#define KEY_MAIL 155
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+#define KEY_COMPUTER 157
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
+#define KEY_CLOSECD 160
+#define KEY_EJECTCD 161
+#define KEY_EJECTCLOSECD 162
+#define KEY_NEXTSONG 163
+#define KEY_PLAYPAUSE 164
+#define KEY_PREVIOUSSONG 165
+#define KEY_STOPCD 166
+#define KEY_RECORD 167
+#define KEY_REWIND 168
+#define KEY_PHONE 169 /* Media Select Telephone */
+#define KEY_ISO 170
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
+#define KEY_MOVE 175
+#define KEY_EDIT 176
+#define KEY_SCROLLUP 177
+#define KEY_SCROLLDOWN 178
+#define KEY_KPLEFTPAREN 179
+#define KEY_KPRIGHTPAREN 180
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
+
+#define KEY_F13 183
+#define KEY_F14 184
+#define KEY_F15 185
+#define KEY_F16 186
+#define KEY_F17 187
+#define KEY_F18 188
+#define KEY_F19 189
+#define KEY_F20 190
+#define KEY_F21 191
+#define KEY_F22 192
+#define KEY_F23 193
+#define KEY_F24 194
+
+#define KEY_PLAYCD 200
+#define KEY_PAUSECD 201
+#define KEY_PROG3 202
+#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_SUSPEND 205
+#define KEY_CLOSE 206 /* AC Close */
+#define KEY_PLAY 207
+#define KEY_FASTFORWARD 208
+#define KEY_BASSBOOST 209
+#define KEY_PRINT 210 /* AC Print */
+#define KEY_HP 211
+#define KEY_CAMERA 212
+#define KEY_SOUND 213
+#define KEY_QUESTION 214
+#define KEY_EMAIL 215
+#define KEY_CHAT 216
+#define KEY_SEARCH 217
+#define KEY_CONNECT 218
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+#define KEY_SPORT 220
+#define KEY_SHOP 221
+#define KEY_ALTERASE 222
+#define KEY_CANCEL 223 /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN 224
+#define KEY_BRIGHTNESSUP 225
+#define KEY_MEDIA 226
+
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE 228
+#define KEY_KBDILLUMDOWN 229
+#define KEY_KBDILLUMUP 230
+
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
+#define KEY_DOCUMENTS 235
+
+#define KEY_BATTERY 236
+
+#define KEY_BLUETOOTH 237
+#define KEY_WLAN 238
+#define KEY_UWB 239
+
+#define KEY_UNKNOWN 240
+
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
+ brightness control is off,
+ rely on ambient */
+#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
+#define KEY_WIMAX KEY_WWAN
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC 0x100
+#define BTN_0 0x100
+#define BTN_1 0x101
+#define BTN_2 0x102
+#define BTN_3 0x103
+#define BTN_4 0x104
+#define BTN_5 0x105
+#define BTN_6 0x106
+#define BTN_7 0x107
+#define BTN_8 0x108
+#define BTN_9 0x109
+
+#define BTN_MOUSE 0x110
+#define BTN_LEFT 0x110
+#define BTN_RIGHT 0x111
+#define BTN_MIDDLE 0x112
+#define BTN_SIDE 0x113
+#define BTN_EXTRA 0x114
+#define BTN_FORWARD 0x115
+#define BTN_BACK 0x116
+#define BTN_TASK 0x117
+
+#define BTN_JOYSTICK 0x120
+#define BTN_TRIGGER 0x120
+#define BTN_THUMB 0x121
+#define BTN_THUMB2 0x122
+#define BTN_TOP 0x123
+#define BTN_TOP2 0x124
+#define BTN_PINKIE 0x125
+#define BTN_BASE 0x126
+#define BTN_BASE2 0x127
+#define BTN_BASE3 0x128
+#define BTN_BASE4 0x129
+#define BTN_BASE5 0x12a
+#define BTN_BASE6 0x12b
+#define BTN_DEAD 0x12f
+
+#define BTN_GAMEPAD 0x130
+#define BTN_SOUTH 0x130
+#define BTN_A BTN_SOUTH
+#define BTN_EAST 0x131
+#define BTN_B BTN_EAST
+#define BTN_C 0x132
+#define BTN_NORTH 0x133
+#define BTN_X BTN_NORTH
+#define BTN_WEST 0x134
+#define BTN_Y BTN_WEST
+#define BTN_Z 0x135
+#define BTN_TL 0x136
+#define BTN_TR 0x137
+#define BTN_TL2 0x138
+#define BTN_TR2 0x139
+#define BTN_SELECT 0x13a
+#define BTN_START 0x13b
+#define BTN_MODE 0x13c
+#define BTN_THUMBL 0x13d
+#define BTN_THUMBR 0x13e
+
+#define BTN_DIGI 0x140
+#define BTN_TOOL_PEN 0x140
+#define BTN_TOOL_RUBBER 0x141
+#define BTN_TOOL_BRUSH 0x142
+#define BTN_TOOL_PENCIL 0x143
+#define BTN_TOOL_AIRBRUSH 0x144
+#define BTN_TOOL_FINGER 0x145
+#define BTN_TOOL_MOUSE 0x146
+#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+#define BTN_TOUCH 0x14a
+#define BTN_STYLUS 0x14b
+#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+
+#define BTN_WHEEL 0x150
+#define BTN_GEAR_DOWN 0x150
+#define BTN_GEAR_UP 0x151
+
+#define KEY_OK 0x160
+#define KEY_SELECT 0x161
+#define KEY_GOTO 0x162
+#define KEY_CLEAR 0x163
+#define KEY_POWER2 0x164
+#define KEY_OPTION 0x165
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME 0x167
+#define KEY_VENDOR 0x168
+#define KEY_ARCHIVE 0x169
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+#define KEY_CHANNEL 0x16b
+#define KEY_FAVORITES 0x16c
+#define KEY_EPG 0x16d
+#define KEY_PVR 0x16e /* Media Select Home */
+#define KEY_MHP 0x16f
+#define KEY_LANGUAGE 0x170
+#define KEY_TITLE 0x171
+#define KEY_SUBTITLE 0x172
+#define KEY_ANGLE 0x173
+#define KEY_ZOOM 0x174
+#define KEY_MODE 0x175
+#define KEY_KEYBOARD 0x176
+#define KEY_SCREEN 0x177
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
+#define KEY_SAT2 0x17e
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
+#define KEY_RADIO 0x181
+#define KEY_TUNER 0x182 /* Media Select Tuner */
+#define KEY_PLAYER 0x183
+#define KEY_TEXT 0x184
+#define KEY_DVD 0x185 /* Media Select DVD */
+#define KEY_AUX 0x186
+#define KEY_MP3 0x187
+#define KEY_AUDIO 0x188 /* AL Audio Browser */
+#define KEY_VIDEO 0x189 /* AL Movie Browser */
+#define KEY_DIRECTORY 0x18a
+#define KEY_LIST 0x18b
+#define KEY_MEMO 0x18c /* Media Select Messages */
+#define KEY_CALENDAR 0x18d
+#define KEY_RED 0x18e
+#define KEY_GREEN 0x18f
+#define KEY_YELLOW 0x190
+#define KEY_BLUE 0x191
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+#define KEY_FIRST 0x194
+#define KEY_LAST 0x195 /* Recall Last */
+#define KEY_AB 0x196
+#define KEY_NEXT 0x197
+#define KEY_RESTART 0x198
+#define KEY_SLOW 0x199
+#define KEY_SHUFFLE 0x19a
+#define KEY_BREAK 0x19b
+#define KEY_PREVIOUS 0x19c
+#define KEY_DIGITS 0x19d
+#define KEY_TEEN 0x19e
+#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+#define KEY_IMAGES 0x1ba /* AL Image Browser */
+
+#define KEY_DEL_EOL 0x1c0
+#define KEY_DEL_EOS 0x1c1
+#define KEY_INS_LINE 0x1c2
+#define KEY_DEL_LINE 0x1c3
+
+#define KEY_FN 0x1d0
+#define KEY_FN_ESC 0x1d1
+#define KEY_FN_F1 0x1d2
+#define KEY_FN_F2 0x1d3
+#define KEY_FN_F3 0x1d4
+#define KEY_FN_F4 0x1d5
+#define KEY_FN_F5 0x1d6
+#define KEY_FN_F6 0x1d7
+#define KEY_FN_F7 0x1d8
+#define KEY_FN_F8 0x1d9
+#define KEY_FN_F9 0x1da
+#define KEY_FN_F10 0x1db
+#define KEY_FN_F11 0x1dc
+#define KEY_FN_F12 0x1dd
+#define KEY_FN_1 0x1de
+#define KEY_FN_2 0x1df
+#define KEY_FN_D 0x1e0
+#define KEY_FN_E 0x1e1
+#define KEY_FN_F 0x1e2
+#define KEY_FN_S 0x1e3
+#define KEY_FN_B 0x1e4
+
+#define KEY_BRL_DOT1 0x1f1
+#define KEY_BRL_DOT2 0x1f2
+#define KEY_BRL_DOT3 0x1f3
+#define KEY_BRL_DOT4 0x1f4
+#define KEY_BRL_DOT5 0x1f5
+#define KEY_BRL_DOT6 0x1f6
+#define KEY_BRL_DOT7 0x1f7
+#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
+#define KEY_CAMERA_ZOOMIN 0x215
+#define KEY_CAMERA_ZOOMOUT 0x216
+#define KEY_CAMERA_UP 0x217
+#define KEY_CAMERA_DOWN 0x218
+#define KEY_CAMERA_LEFT 0x219
+#define KEY_CAMERA_RIGHT 0x21a
+
+#define KEY_ATTENDANT_ON 0x21b
+#define KEY_ATTENDANT_OFF 0x21c
+#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
+#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+
+#define BTN_DPAD_UP 0x220
+#define BTN_DPAD_DOWN 0x221
+#define BTN_DPAD_LEFT 0x222
+#define BTN_DPAD_RIGHT 0x223
+
+#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
+
+#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
+#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
+#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
+#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
+#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
+#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
+#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
+
+#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
+#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
+
+#define KEY_KBDINPUTASSIST_PREV 0x260
+#define KEY_KBDINPUTASSIST_NEXT 0x261
+#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
+#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
+#define KEY_KBDINPUTASSIST_ACCEPT 0x264
+#define KEY_KBDINPUTASSIST_CANCEL 0x265
+
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING KEY_MUTE
+#define KEY_MAX 0x2ff
+#define KEY_CNT (KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X 0x00
+#define REL_Y 0x01
+#define REL_Z 0x02
+#define REL_RX 0x03
+#define REL_RY 0x04
+#define REL_RZ 0x05
+#define REL_HWHEEL 0x06
+#define REL_DIAL 0x07
+#define REL_WHEEL 0x08
+#define REL_MISC 0x09
+#define REL_MAX 0x0f
+#define REL_CNT (REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X 0x00
+#define ABS_Y 0x01
+#define ABS_Z 0x02
+#define ABS_RX 0x03
+#define ABS_RY 0x04
+#define ABS_RZ 0x05
+#define ABS_THROTTLE 0x06
+#define ABS_RUDDER 0x07
+#define ABS_WHEEL 0x08
+#define ABS_GAS 0x09
+#define ABS_BRAKE 0x0a
+#define ABS_HAT0X 0x10
+#define ABS_HAT0Y 0x11
+#define ABS_HAT1X 0x12
+#define ABS_HAT1Y 0x13
+#define ABS_HAT2X 0x14
+#define ABS_HAT2Y 0x15
+#define ABS_HAT3X 0x16
+#define ABS_HAT3Y 0x17
+#define ABS_PRESSURE 0x18
+#define ABS_DISTANCE 0x19
+#define ABS_TILT_X 0x1a
+#define ABS_TILT_Y 0x1b
+#define ABS_TOOL_WIDTH 0x1c
+
+#define ABS_VOLUME 0x20
+
+#define ABS_MISC 0x28
+
+#define ABS_MT_SLOT 0x2f /* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
+#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
+#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
+#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
+
+
+#define ABS_MAX 0x3f
+#define ABS_CNT (ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
+#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
+#define SW_DOCK 0x05 /* set = plugged into dock */
+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
+#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
+#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT 0x0d /* set = inserted */
+#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
+#define SW_MAX 0x0f
+#define SW_CNT (SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL 0x00
+#define MSC_PULSELED 0x01
+#define MSC_GESTURE 0x02
+#define MSC_RAW 0x03
+#define MSC_SCAN 0x04
+#define MSC_TIMESTAMP 0x05
+#define MSC_MAX 0x07
+#define MSC_CNT (MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML 0x00
+#define LED_CAPSL 0x01
+#define LED_SCROLLL 0x02
+#define LED_COMPOSE 0x03
+#define LED_KANA 0x04
+#define LED_SLEEP 0x05
+#define LED_SUSPEND 0x06
+#define LED_MUTE 0x07
+#define LED_MISC 0x08
+#define LED_MAIL 0x09
+#define LED_CHARGING 0x0a
+#define LED_MAX 0x0f
+#define LED_CNT (LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY 0x00
+#define REP_PERIOD 0x01
+#define REP_MAX 0x01
+#define REP_CNT (REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK 0x00
+#define SND_BELL 0x01
+#define SND_TONE 0x02
+#define SND_MAX 0x07
+#define SND_CNT (SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS 0
+#define ID_VENDOR 1
+#define ID_PRODUCT 2
+#define ID_VERSION 3
+
+#define BUS_PCI 0x01
+#define BUS_ISAPNP 0x02
+#define BUS_USB 0x03
+#define BUS_HIL 0x04
+#define BUS_BLUETOOTH 0x05
+#define BUS_VIRTUAL 0x06
+
+#define BUS_ISA 0x10
+#define BUS_I8042 0x11
+#define BUS_XTKBD 0x12
+#define BUS_RS232 0x13
+#define BUS_GAMEPORT 0x14
+#define BUS_PARPORT 0x15
+#define BUS_AMIGA 0x16
+#define BUS_ADB 0x17
+#define BUS_I2C 0x18
+#define BUS_HOST 0x19
+#define BUS_GSC 0x1A
+#define BUS_ATARI 0x1B
+#define BUS_SPI 0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+#define MT_TOOL_MAX 1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED 0x00
+#define FF_STATUS_PLAYING 0x01
+#define FF_STATUS_MAX 0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+ uint16_t length;
+ uint16_t delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+ uint16_t button;
+ uint16_t interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+ uint16_t attack_length;
+ uint16_t attack_level;
+ uint16_t fade_length;
+ uint16_t fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+ int16_t level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+ int16_t start_level;
+ int16_t end_level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ * to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+ uint16_t right_saturation;
+ uint16_t left_saturation;
+
+ int16_t right_coeff;
+ int16_t left_coeff;
+
+ uint16_t deadband;
+ int16_t center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+ uint16_t waveform;
+ uint16_t period;
+ int16_t magnitude;
+ int16_t offset;
+ uint16_t phase;
+
+ struct ff_envelope envelope;
+
+ uint32_t custom_len;
+ int16_t *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+ uint16_t strong_magnitude;
+ uint16_t weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ * defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ * 0 deg -> 0x0000 (down)
+ * 90 deg -> 0x4000 (left)
+ * 180 deg -> 0x8000 (up)
+ * 270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+ uint16_t type;
+ int16_t id;
+ uint16_t direction;
+ struct ff_trigger trigger;
+ struct ff_replay replay;
+
+ union {
+ struct ff_constant_effect constant;
+ struct ff_ramp_effect ramp;
+ struct ff_periodic_effect periodic;
+ struct ff_condition_effect condition[2]; /* One for each axis */
+ struct ff_rumble_effect rumble;
+ } u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE 0x50
+#define FF_PERIODIC 0x51
+#define FF_CONSTANT 0x52
+#define FF_SPRING 0x53
+#define FF_FRICTION 0x54
+#define FF_DAMPER 0x55
+#define FF_INERTIA 0x56
+#define FF_RAMP 0x57
+
+#define FF_EFFECT_MIN FF_RUMBLE
+#define FF_EFFECT_MAX FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE 0x58
+#define FF_TRIANGLE 0x59
+#define FF_SINE 0x5a
+#define FF_SAW_UP 0x5b
+#define FF_SAW_DOWN 0x5c
+#define FF_CUSTOM 0x5d
+
+#define FF_WAVEFORM_MIN FF_SQUARE
+#define FF_WAVEFORM_MAX FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN 0x60
+#define FF_AUTOCENTER 0x61
+
+#define FF_MAX 0x7f
+#define FF_CNT (FF_MAX+1)
+
+#endif /* _INPUT_H */
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
index f208ec9..baf4220 100755
--- a/scripts/update-linux-headers.sh
+++ b/scripts/update-linux-headers.sh
@@ -31,7 +31,7 @@ fi
cp_virtio() {
from=$1
to=$2
- virtio=$(find "$from" -name '*virtio*h')
+ virtio=$(find "$from" -name '*virtio*h' -o -name "input.h")
if [ "$virtio" ]; then
rm -rf "$to"
mkdir -p "$to"
@@ -40,6 +40,7 @@ cp_virtio() {
grep '#include' "$f" | grep -v -e 'linux/virtio' \
-e 'linux/types' \
-e 'linux/if_ether' \
+ -e 'sys/' \
> /dev/null
then
echo "Unexpected #include in input file $f".
@@ -48,6 +49,7 @@ cp_virtio() {
header=$(basename "$f");
sed -e 's/__u\([0-9][0-9]*\)/uint\1_t/g' \
+ -e 's/__s\([0-9][0-9]*\)/int\1_t/g' \
-e 's/__le\([0-9][0-9]*\)/uint\1_t/g' \
-e 's/__be\([0-9][0-9]*\)/uint\1_t/g' \
-e 's/<linux\/\([^>]*\)>/"standard-headers\/linux\/\1"/' \
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 4/6] virtio-input: core code & base class
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
` (2 preceding siblings ...)
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 3/6] virtio-input: add linux/input.h Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 5/6] virtio-input: emulated devices Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough Gerd Hoffmann
5 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
This patch adds virtio-input support to qemu. It brings a abstract
base class providing core support, other classes can build on it to
actually implement input devices.
virtio-input basically sends linux input layer events (evdev) over
virtio.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/input/Makefile.objs | 4 +
hw/input/virtio-input.c | 282 +++++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 36 +++++
hw/virtio/virtio-pci.h | 14 ++
include/hw/virtio/virtio-input.h | 84 ++++++++++++
include/hw/virtio/virtio.h | 1 +
6 files changed, 421 insertions(+)
create mode 100644 hw/input/virtio-input.c
create mode 100644 include/hw/virtio/virtio-input.h
diff --git a/hw/input/Makefile.objs b/hw/input/Makefile.objs
index e8c80b9..ee8bba9 100644
--- a/hw/input/Makefile.objs
+++ b/hw/input/Makefile.objs
@@ -8,6 +8,10 @@ common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
common-obj-$(CONFIG_TSC2005) += tsc2005.o
common-obj-$(CONFIG_VMMOUSE) += vmmouse.o
+ifeq ($(CONFIG_LINUX),y)
+common-obj-$(CONFIG_VIRTIO) += virtio-input.o
+endif
+
obj-$(CONFIG_MILKYMIST) += milkymist-softusb.o
obj-$(CONFIG_PXA2XX) += pxa2xx_keypad.o
obj-$(CONFIG_TSC210X) += tsc210x.o
diff --git a/hw/input/virtio-input.c b/hw/input/virtio-input.c
new file mode 100644
index 0000000..17cbe97
--- /dev/null
+++ b/hw/input/virtio-input.c
@@ -0,0 +1,282 @@
+/*
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#include "qemu/iov.h"
+
+#include "hw/qdev.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-input.h"
+
+#include "standard-headers/linux/input.h"
+
+/* ----------------------------------------------------------------- */
+
+void virtio_input_send(VirtIOInput *vinput, virtio_input_event *event)
+{
+ VirtQueueElement elem;
+ unsigned have, need;
+ int i, len;
+
+ /* queue up events ... */
+ if (vinput->qindex == vinput->qsize) {
+ vinput->qsize++;
+ vinput->queue = realloc(vinput->queue, vinput->qsize *
+ sizeof(virtio_input_event));
+ }
+ vinput->queue[vinput->qindex++] = *event;
+
+ /* ... until we see a report sync ... */
+ if (event->type != cpu_to_le16(EV_SYN) ||
+ event->code != cpu_to_le16(SYN_REPORT)) {
+ return;
+ }
+
+ /* ... then check available space ... */
+ need = sizeof(virtio_input_event) * vinput->qindex;
+ virtqueue_get_avail_bytes(vinput->evt, &have, NULL, need, 0);
+ if (have < need) {
+ vinput->qindex = 0;
+ fprintf(stderr, "%s: ENOSPC in vq, dropping events\n", __func__);
+ return;
+ }
+
+ /* ... and finally pass them to the guest */
+ for (i = 0; i < vinput->qindex; i++) {
+ if (!virtqueue_pop(vinput->evt, &elem)) {
+ /* should not happen, we've checked for space beforehand */
+ fprintf(stderr, "%s: Huh? No vq elem available ...\n", __func__);
+ return;
+ }
+ len = iov_from_buf(elem.in_sg, elem.in_num,
+ 0, vinput->queue+i, sizeof(virtio_input_event));
+ virtqueue_push(vinput->evt, &elem, len);
+ }
+ virtio_notify(VIRTIO_DEVICE(vinput), vinput->evt);
+ vinput->qindex = 0;
+}
+
+static void virtio_input_handle_evt(VirtIODevice *vdev, VirtQueue *vq)
+{
+ /* nothing */
+}
+
+static void virtio_input_handle_sts(VirtIODevice *vdev, VirtQueue *vq)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_GET_CLASS(vdev);
+ VirtIOInput *vinput = VIRTIO_INPUT(vdev);
+ virtio_input_event event;
+ VirtQueueElement elem;
+ int len;
+
+ while (virtqueue_pop(vinput->sts, &elem)) {
+ memset(&event, 0, sizeof(event));
+ len = iov_to_buf(elem.out_sg, elem.out_num,
+ 0, &event, sizeof(event));
+ if (vic->handle_status) {
+ vic->handle_status(vinput, &event);
+ }
+ virtqueue_push(vinput->sts, &elem, len);
+ }
+ virtio_notify(vdev, vinput->sts);
+}
+
+static virtio_input_config *virtio_input_find_config(VirtIOInput *vinput,
+ uint8_t select,
+ uint8_t subsel)
+{
+ VirtIOInputConfig *cfg;
+
+ QTAILQ_FOREACH(cfg, &vinput->cfg_list, node) {
+ if (select == cfg->config.select &&
+ subsel == cfg->config.subsel) {
+ return &cfg->config;
+ }
+ }
+ return NULL;
+}
+
+void virtio_input_add_config(VirtIOInput *vinput,
+ virtio_input_config *config)
+{
+ VirtIOInputConfig *cfg;
+
+ if (virtio_input_find_config(vinput, config->select, config->subsel)) {
+ /* should not happen */
+ fprintf(stderr, "%s: duplicate config: %d/%d\n",
+ __func__, config->select, config->subsel);
+ abort();
+ }
+
+ cfg = g_new0(VirtIOInputConfig, 1);
+ cfg->config = *config;
+ QTAILQ_INSERT_TAIL(&vinput->cfg_list, cfg, node);
+}
+
+void virtio_input_init_config(VirtIOInput *vinput,
+ virtio_input_config *config)
+{
+ int i = 0;
+
+ QTAILQ_INIT(&vinput->cfg_list);
+ while (config[i].select) {
+ virtio_input_add_config(vinput, config + i);
+ i++;
+ }
+}
+
+void virtio_input_idstr_config(VirtIOInput *vinput,
+ uint8_t select, const char *string)
+{
+ virtio_input_config id;
+
+ if (!string) {
+ return;
+ }
+ memset(&id, 0, sizeof(id));
+ id.select = select;
+ id.size = snprintf(id.u.string, sizeof(id.u.string), "%s", string);
+ virtio_input_add_config(vinput, &id);
+}
+
+static void virtio_input_get_config(VirtIODevice *vdev, uint8_t *config_data)
+{
+ VirtIOInput *vinput = VIRTIO_INPUT(vdev);
+ virtio_input_config *config;
+
+ config = virtio_input_find_config(vinput, vinput->cfg_select,
+ vinput->cfg_subsel);
+ if (config) {
+ memcpy(config_data, config, vinput->cfg_size);
+ } else {
+ memset(config_data, 0, vinput->cfg_size);
+ }
+}
+
+static void virtio_input_set_config(VirtIODevice *vdev,
+ const uint8_t *config_data)
+{
+ VirtIOInput *vinput = VIRTIO_INPUT(vdev);
+ virtio_input_config *config = (virtio_input_config *)config_data;
+
+ vinput->cfg_select = config->select;
+ vinput->cfg_subsel = config->subsel;
+ virtio_notify_config(vdev);
+}
+
+static uint64_t virtio_input_get_features(VirtIODevice *vdev, uint64_t f)
+{
+ return f;
+}
+
+static void virtio_input_set_status(VirtIODevice *vdev, uint8_t val)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_GET_CLASS(vdev);
+ VirtIOInput *vinput = VIRTIO_INPUT(vdev);
+
+ if (val & VIRTIO_CONFIG_S_DRIVER_OK) {
+ if (!vinput->active) {
+ vinput->active = true;
+ if (vic->change_active) {
+ vic->change_active(vinput);
+ }
+ }
+ }
+}
+
+static void virtio_input_reset(VirtIODevice *vdev)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_GET_CLASS(vdev);
+ VirtIOInput *vinput = VIRTIO_INPUT(vdev);
+
+ if (vinput->active) {
+ vinput->active = false;
+ if (vic->change_active) {
+ vic->change_active(vinput);
+ }
+ }
+}
+
+static void virtio_input_device_realize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_GET_CLASS(dev);
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VirtIOInput *vinput = VIRTIO_INPUT(dev);
+ VirtIOInputConfig *cfg;
+ Error *local_err = NULL;
+
+ if (vic->realize) {
+ vic->realize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ }
+
+ virtio_input_idstr_config(vinput, VIRTIO_INPUT_CFG_ID_SERIAL,
+ vinput->input.serial);
+
+ QTAILQ_FOREACH(cfg, &vinput->cfg_list, node) {
+ if (vinput->cfg_size < cfg->config.size) {
+ vinput->cfg_size = cfg->config.size;
+ }
+ }
+ vinput->cfg_size += 4;
+ assert(vinput->cfg_size <= sizeof(virtio_input_config));
+
+ virtio_init(vdev, "virtio-input", VIRTIO_ID_INPUT,
+ vinput->cfg_size);
+ vinput->evt = virtio_add_queue(vdev, 64, virtio_input_handle_evt);
+ vinput->sts = virtio_add_queue(vdev, 64, virtio_input_handle_sts);
+}
+
+static void virtio_input_device_unrealize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_GET_CLASS(dev);
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ Error *local_err = NULL;
+
+ if (vic->unrealize) {
+ vic->unrealize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ }
+ virtio_cleanup(vdev);
+}
+
+static void virtio_input_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ vdc->realize = virtio_input_device_realize;
+ vdc->unrealize = virtio_input_device_unrealize;
+ vdc->get_config = virtio_input_get_config;
+ vdc->set_config = virtio_input_set_config;
+ vdc->get_features = virtio_input_get_features;
+ vdc->set_status = virtio_input_set_status;
+ vdc->reset = virtio_input_reset;
+}
+
+static const TypeInfo virtio_input_info = {
+ .name = TYPE_VIRTIO_INPUT,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VirtIOInput),
+ .class_size = sizeof(VirtIOInputClass),
+ .class_init = virtio_input_class_init,
+ .abstract = true,
+};
+
+/* ----------------------------------------------------------------- */
+
+static void virtio_register_types(void)
+{
+ type_register_static(&virtio_input_info);
+}
+
+type_init(virtio_register_types)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 4c653fe..4bfd927 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -24,6 +24,7 @@
#include "hw/virtio/virtio-serial.h"
#include "hw/virtio/virtio-scsi.h"
#include "hw/virtio/virtio-balloon.h"
+#include "hw/virtio/virtio-input.h"
#include "hw/pci/pci.h"
#include "qemu/error-report.h"
#include "hw/pci/msi.h"
@@ -1888,6 +1889,40 @@ static const TypeInfo virtio_rng_pci_info = {
.class_init = virtio_rng_pci_class_init,
};
+/* virtio-input-pci */
+
+static void virtio_input_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
+{
+ VirtIOInputPCI *vinput = VIRTIO_INPUT_PCI(vpci_dev);
+ DeviceState *vdev = DEVICE(&vinput->vdev);
+
+ qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
+ /* force virtio-1.0 */
+ vpci_dev->flags &= ~VIRTIO_PCI_FLAG_DISABLE_MODERN;
+ vpci_dev->flags |= VIRTIO_PCI_FLAG_DISABLE_LEGACY;
+ object_property_set_bool(OBJECT(vdev), true, "realized", errp);
+}
+
+static void virtio_input_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
+ PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = virtio_input_pci_realize;
+ set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+
+ pcidev_k->class_id = PCI_CLASS_INPUT_OTHER;
+}
+
+static const TypeInfo virtio_input_pci_info = {
+ .name = TYPE_VIRTIO_INPUT_PCI,
+ .parent = TYPE_VIRTIO_PCI,
+ .instance_size = sizeof(VirtIOInputPCI),
+ .class_init = virtio_input_pci_class_init,
+ .abstract = true,
+};
+
/* virtio-pci-bus */
static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size,
@@ -1929,6 +1964,7 @@ static const TypeInfo virtio_pci_bus_info = {
static void virtio_pci_register_types(void)
{
type_register_static(&virtio_rng_pci_info);
+ type_register_static(&virtio_input_pci_info);
type_register_static(&virtio_pci_bus_info);
type_register_static(&virtio_pci_info);
#ifdef CONFIG_VIRTFS
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index b382688..8a744eb 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -24,6 +24,7 @@
#include "hw/virtio/virtio-balloon.h"
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-9p.h"
+#include "hw/virtio/virtio-input.h"
#ifdef CONFIG_VIRTFS
#include "hw/9pfs/virtio-9p.h"
#endif
@@ -39,6 +40,7 @@ typedef struct VirtIOSerialPCI VirtIOSerialPCI;
typedef struct VirtIONetPCI VirtIONetPCI;
typedef struct VHostSCSIPCI VHostSCSIPCI;
typedef struct VirtIORngPCI VirtIORngPCI;
+typedef struct VirtIOInputPCI VirtIOInputPCI;
/* virtio-pci-bus */
@@ -225,6 +227,18 @@ struct VirtIORngPCI {
VirtIORNG vdev;
};
+/*
+ * virtio-input-pci: This extends VirtioPCIProxy.
+ */
+#define TYPE_VIRTIO_INPUT_PCI "virtio-input-pci"
+#define VIRTIO_INPUT_PCI(obj) \
+ OBJECT_CHECK(VirtIOInputPCI, (obj), TYPE_VIRTIO_INPUT_PCI)
+
+struct VirtIOInputPCI {
+ VirtIOPCIProxy parent_obj;
+ VirtIOInput vdev;
+};
+
/* Virtio ABI version, if we increment this, we break the guest driver. */
#define VIRTIO_PCI_ABI_VERSION 0
diff --git a/include/hw/virtio/virtio-input.h b/include/hw/virtio/virtio-input.h
new file mode 100644
index 0000000..ad915cc
--- /dev/null
+++ b/include/hw/virtio/virtio-input.h
@@ -0,0 +1,84 @@
+#ifndef _QEMU_VIRTIO_INPUT_H
+#define _QEMU_VIRTIO_INPUT_H
+
+#include "ui/input.h"
+
+/* ----------------------------------------------------------------- */
+/* virtio input protocol */
+
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_input.h"
+
+typedef struct virtio_input_absinfo virtio_input_absinfo;
+typedef struct virtio_input_config virtio_input_config;
+typedef struct virtio_input_event virtio_input_event;
+
+#if defined(HOST_WORDS_BIGENDIAN)
+# define const_le32(_x) bswap32(_x)
+# define const_le16(_x) bswap32(_x)
+#else
+# define const_le32(_x) (_x)
+# define const_le16(_x) (_x)
+#endif
+
+/* ----------------------------------------------------------------- */
+/* qemu internals */
+
+#define TYPE_VIRTIO_INPUT "virtio-input-device"
+#define VIRTIO_INPUT(obj) \
+ OBJECT_CHECK(VirtIOInput, (obj), TYPE_VIRTIO_INPUT)
+#define VIRTIO_INPUT_GET_PARENT_CLASS(obj) \
+ OBJECT_GET_PARENT_CLASS(obj, TYPE_VIRTIO_INPUT)
+#define VIRTIO_INPUT_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(VirtIOInputClass, obj, TYPE_VIRTIO_INPUT)
+#define VIRTIO_INPUT_CLASS(klass) \
+ OBJECT_CLASS_CHECK(VirtIOInputClass, klass, TYPE_VIRTIO_INPUT)
+
+typedef struct VirtIOInput VirtIOInput;
+typedef struct VirtIOInputClass VirtIOInputClass;
+typedef struct VirtIOInputConfig VirtIOInputConfig;
+
+struct virtio_input_conf {
+ char *serial;
+};
+
+struct VirtIOInputConfig {
+ virtio_input_config config;
+ QTAILQ_ENTRY(VirtIOInputConfig) node;
+};
+
+struct VirtIOInput {
+ VirtIODevice parent_obj;
+ uint8_t cfg_select;
+ uint8_t cfg_subsel;
+ uint32_t cfg_size;
+ QTAILQ_HEAD(, VirtIOInputConfig) cfg_list;
+ VirtQueue *evt, *sts;
+ virtio_input_conf input;
+
+ virtio_input_event *queue;
+ uint32_t qindex, qsize;
+
+ bool active;
+};
+
+struct VirtIOInputClass {
+ /*< private >*/
+ VirtioDeviceClass parent;
+ /*< public >*/
+
+ DeviceRealize realize;
+ DeviceUnrealize unrealize;
+ void (*change_active)(VirtIOInput *vinput);
+ void (*handle_status)(VirtIOInput *vinput, virtio_input_event *event);
+};
+
+void virtio_input_send(VirtIOInput *vinput, virtio_input_event *event);
+void virtio_input_init_config(VirtIOInput *vinput,
+ virtio_input_config *config);
+void virtio_input_add_config(VirtIOInput *vinput,
+ virtio_input_config *config);
+void virtio_input_idstr_config(VirtIOInput *vinput,
+ uint8_t select, const char *string);
+
+#endif /* _QEMU_VIRTIO_INPUT_H */
diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
index a4ade5c..8e33fe4 100644
--- a/include/hw/virtio/virtio.h
+++ b/include/hw/virtio/virtio.h
@@ -201,6 +201,7 @@ int virtio_set_features(VirtIODevice *vdev, uint64_t val);
typedef struct VirtIOBlkConf VirtIOBlkConf;
struct virtio_net_conf;
typedef struct virtio_serial_conf virtio_serial_conf;
+typedef struct virtio_input_conf virtio_input_conf;
typedef struct VirtIOSCSIConf VirtIOSCSIConf;
typedef struct VirtIORNGConf VirtIORNGConf;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 5/6] virtio-input: emulated devices
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
` (3 preceding siblings ...)
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 4/6] virtio-input: core code & base class Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough Gerd Hoffmann
5 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
This patch adds the virtio-input-hid base class and
virtio-{keyboard,mouse,tablet} subclasses building on the base class.
They are hooked up to the qemu input core and deliver input events
to the guest like all other hid devices (ps/2 kbd, usb tablet, ...).
Using them is as simple as adding "-device virtio-tablet-pci" to your
command line. If you want add multiple devices but don't want waste
a pci slot for each you can compose a multifunction device this way:
qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \
-device virtio-tablet-pci,addr=0d.1,multifunction=on
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/input/Makefile.objs | 1 +
hw/input/virtio-input-hid.c | 502 +++++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 84 +++++++
hw/virtio/virtio-pci.h | 13 +
include/hw/virtio/virtio-input.h | 21 ++
5 files changed, 621 insertions(+)
create mode 100644 hw/input/virtio-input-hid.c
diff --git a/hw/input/Makefile.objs b/hw/input/Makefile.objs
index ee8bba9..0dae710 100644
--- a/hw/input/Makefile.objs
+++ b/hw/input/Makefile.objs
@@ -10,6 +10,7 @@ common-obj-$(CONFIG_VMMOUSE) += vmmouse.o
ifeq ($(CONFIG_LINUX),y)
common-obj-$(CONFIG_VIRTIO) += virtio-input.o
+common-obj-$(CONFIG_VIRTIO) += virtio-input-hid.o
endif
obj-$(CONFIG_MILKYMIST) += milkymist-softusb.o
diff --git a/hw/input/virtio-input-hid.c b/hw/input/virtio-input-hid.c
new file mode 100644
index 0000000..32cc94a
--- /dev/null
+++ b/hw/input/virtio-input-hid.c
@@ -0,0 +1,502 @@
+/*
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#include "qemu/iov.h"
+
+#include "hw/qdev.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-input.h"
+
+#undef CONFIG_CURSES
+#include "ui/console.h"
+
+#include "standard-headers/linux/input.h"
+
+#define VIRTIO_ID_NAME_KEYBOARD "QEMU Virtio Keyboard"
+#define VIRTIO_ID_NAME_MOUSE "QEMU Virtio Mouse"
+#define VIRTIO_ID_NAME_TABLET "QEMU Virtio Tablet"
+
+/* ----------------------------------------------------------------- */
+
+static const unsigned int keymap_qcode[Q_KEY_CODE_MAX] = {
+ [Q_KEY_CODE_ESC] = KEY_ESC,
+ [Q_KEY_CODE_1] = KEY_1,
+ [Q_KEY_CODE_2] = KEY_2,
+ [Q_KEY_CODE_3] = KEY_3,
+ [Q_KEY_CODE_4] = KEY_4,
+ [Q_KEY_CODE_5] = KEY_5,
+ [Q_KEY_CODE_6] = KEY_6,
+ [Q_KEY_CODE_7] = KEY_7,
+ [Q_KEY_CODE_8] = KEY_8,
+ [Q_KEY_CODE_9] = KEY_9,
+ [Q_KEY_CODE_0] = KEY_0,
+ [Q_KEY_CODE_MINUS] = KEY_MINUS,
+ [Q_KEY_CODE_EQUAL] = KEY_EQUAL,
+ [Q_KEY_CODE_BACKSPACE] = KEY_BACKSPACE,
+
+ [Q_KEY_CODE_TAB] = KEY_TAB,
+ [Q_KEY_CODE_Q] = KEY_Q,
+ [Q_KEY_CODE_W] = KEY_W,
+ [Q_KEY_CODE_E] = KEY_E,
+ [Q_KEY_CODE_R] = KEY_R,
+ [Q_KEY_CODE_T] = KEY_T,
+ [Q_KEY_CODE_Y] = KEY_Y,
+ [Q_KEY_CODE_U] = KEY_U,
+ [Q_KEY_CODE_I] = KEY_I,
+ [Q_KEY_CODE_O] = KEY_O,
+ [Q_KEY_CODE_P] = KEY_P,
+ [Q_KEY_CODE_BRACKET_LEFT] = KEY_LEFTBRACE,
+ [Q_KEY_CODE_BRACKET_RIGHT] = KEY_RIGHTBRACE,
+ [Q_KEY_CODE_RET] = KEY_ENTER,
+
+ [Q_KEY_CODE_CTRL] = KEY_LEFTCTRL,
+ [Q_KEY_CODE_A] = KEY_A,
+ [Q_KEY_CODE_S] = KEY_S,
+ [Q_KEY_CODE_D] = KEY_D,
+ [Q_KEY_CODE_F] = KEY_F,
+ [Q_KEY_CODE_G] = KEY_G,
+ [Q_KEY_CODE_H] = KEY_H,
+ [Q_KEY_CODE_J] = KEY_J,
+ [Q_KEY_CODE_K] = KEY_K,
+ [Q_KEY_CODE_L] = KEY_L,
+ [Q_KEY_CODE_SEMICOLON] = KEY_SEMICOLON,
+ [Q_KEY_CODE_APOSTROPHE] = KEY_APOSTROPHE,
+ [Q_KEY_CODE_GRAVE_ACCENT] = KEY_GRAVE,
+
+ [Q_KEY_CODE_SHIFT] = KEY_LEFTSHIFT,
+ [Q_KEY_CODE_BACKSLASH] = KEY_BACKSLASH,
+ [Q_KEY_CODE_LESS] = KEY_102ND,
+ [Q_KEY_CODE_Z] = KEY_Z,
+ [Q_KEY_CODE_X] = KEY_X,
+ [Q_KEY_CODE_C] = KEY_C,
+ [Q_KEY_CODE_V] = KEY_V,
+ [Q_KEY_CODE_B] = KEY_B,
+ [Q_KEY_CODE_N] = KEY_N,
+ [Q_KEY_CODE_M] = KEY_M,
+ [Q_KEY_CODE_COMMA] = KEY_COMMA,
+ [Q_KEY_CODE_DOT] = KEY_DOT,
+ [Q_KEY_CODE_SLASH] = KEY_SLASH,
+ [Q_KEY_CODE_SHIFT_R] = KEY_RIGHTSHIFT,
+
+ [Q_KEY_CODE_ALT] = KEY_LEFTALT,
+ [Q_KEY_CODE_SPC] = KEY_SPACE,
+ [Q_KEY_CODE_CAPS_LOCK] = KEY_CAPSLOCK,
+
+ [Q_KEY_CODE_F1] = KEY_F1,
+ [Q_KEY_CODE_F2] = KEY_F2,
+ [Q_KEY_CODE_F3] = KEY_F3,
+ [Q_KEY_CODE_F4] = KEY_F4,
+ [Q_KEY_CODE_F5] = KEY_F5,
+ [Q_KEY_CODE_F6] = KEY_F6,
+ [Q_KEY_CODE_F7] = KEY_F7,
+ [Q_KEY_CODE_F8] = KEY_F8,
+ [Q_KEY_CODE_F9] = KEY_F9,
+ [Q_KEY_CODE_F10] = KEY_F10,
+ [Q_KEY_CODE_NUM_LOCK] = KEY_NUMLOCK,
+ [Q_KEY_CODE_SCROLL_LOCK] = KEY_SCROLLLOCK,
+
+ [Q_KEY_CODE_KP_0] = KEY_KP0,
+ [Q_KEY_CODE_KP_1] = KEY_KP1,
+ [Q_KEY_CODE_KP_2] = KEY_KP2,
+ [Q_KEY_CODE_KP_3] = KEY_KP3,
+ [Q_KEY_CODE_KP_4] = KEY_KP4,
+ [Q_KEY_CODE_KP_5] = KEY_KP5,
+ [Q_KEY_CODE_KP_6] = KEY_KP6,
+ [Q_KEY_CODE_KP_7] = KEY_KP7,
+ [Q_KEY_CODE_KP_8] = KEY_KP8,
+ [Q_KEY_CODE_KP_9] = KEY_KP9,
+ [Q_KEY_CODE_KP_SUBTRACT] = KEY_KPMINUS,
+ [Q_KEY_CODE_KP_ADD] = KEY_KPPLUS,
+ [Q_KEY_CODE_KP_DECIMAL] = KEY_KPDOT,
+ [Q_KEY_CODE_KP_ENTER] = KEY_KPENTER,
+ [Q_KEY_CODE_KP_DIVIDE] = KEY_KPSLASH,
+ [Q_KEY_CODE_KP_MULTIPLY] = KEY_KPASTERISK,
+
+ [Q_KEY_CODE_F11] = KEY_F11,
+ [Q_KEY_CODE_F12] = KEY_F12,
+
+ [Q_KEY_CODE_CTRL_R] = KEY_RIGHTCTRL,
+ [Q_KEY_CODE_SYSRQ] = KEY_SYSRQ,
+ [Q_KEY_CODE_ALT_R] = KEY_RIGHTALT,
+
+ [Q_KEY_CODE_HOME] = KEY_HOME,
+ [Q_KEY_CODE_UP] = KEY_UP,
+ [Q_KEY_CODE_PGUP] = KEY_PAGEUP,
+ [Q_KEY_CODE_LEFT] = KEY_LEFT,
+ [Q_KEY_CODE_RIGHT] = KEY_RIGHT,
+ [Q_KEY_CODE_END] = KEY_END,
+ [Q_KEY_CODE_DOWN] = KEY_DOWN,
+ [Q_KEY_CODE_PGDN] = KEY_PAGEDOWN,
+ [Q_KEY_CODE_INSERT] = KEY_INSERT,
+ [Q_KEY_CODE_DELETE] = KEY_DELETE,
+
+ [Q_KEY_CODE_META_L] = KEY_LEFTMETA,
+ [Q_KEY_CODE_META_R] = KEY_RIGHTMETA,
+ [Q_KEY_CODE_MENU] = KEY_MENU,
+};
+
+static const unsigned int keymap_button[INPUT_BUTTON_MAX] = {
+ [INPUT_BUTTON_LEFT] = BTN_LEFT,
+ [INPUT_BUTTON_RIGHT] = BTN_RIGHT,
+ [INPUT_BUTTON_MIDDLE] = BTN_MIDDLE,
+ [INPUT_BUTTON_WHEEL_UP] = BTN_GEAR_UP,
+ [INPUT_BUTTON_WHEEL_DOWN] = BTN_GEAR_DOWN,
+};
+
+static const unsigned int axismap_rel[INPUT_AXIS_MAX] = {
+ [INPUT_AXIS_X] = REL_X,
+ [INPUT_AXIS_Y] = REL_Y,
+};
+
+static const unsigned int axismap_abs[INPUT_AXIS_MAX] = {
+ [INPUT_AXIS_X] = ABS_X,
+ [INPUT_AXIS_Y] = ABS_Y,
+};
+
+/* ----------------------------------------------------------------- */
+
+static void virtio_input_key_config(VirtIOInput *vinput,
+ const unsigned int *keymap,
+ size_t mapsize)
+{
+ virtio_input_config keys;
+ int i, bit, byte, bmax = 0;
+
+ memset(&keys, 0, sizeof(keys));
+ for (i = 0; i < mapsize; i++) {
+ bit = keymap[i];
+ if (!bit) {
+ continue;
+ }
+ byte = bit / 8;
+ bit = bit % 8;
+ keys.u.bitmap[byte] |= (1 << bit);
+ if (bmax < byte+1) {
+ bmax = byte+1;
+ }
+ }
+ keys.select = VIRTIO_INPUT_CFG_EV_BITS;
+ keys.subsel = EV_KEY;
+ keys.size = bmax;
+ virtio_input_add_config(vinput, &keys);
+}
+
+static void virtio_input_handle_event(DeviceState *dev, QemuConsole *src,
+ InputEvent *evt)
+{
+ VirtIOInput *vinput = VIRTIO_INPUT(dev);
+ virtio_input_event event;
+ int qcode;
+
+ switch (evt->kind) {
+ case INPUT_EVENT_KIND_KEY:
+ qcode = qemu_input_key_value_to_qcode(evt->key->key);
+ if (qcode && keymap_qcode[qcode]) {
+ event.type = cpu_to_le16(EV_KEY);
+ event.code = cpu_to_le16(keymap_qcode[qcode]);
+ event.value = cpu_to_le32(evt->key->down ? 1 : 0);
+ virtio_input_send(vinput, &event);
+ } else {
+ if (evt->key->down) {
+ fprintf(stderr, "%s: unmapped key: %d [%s]\n", __func__,
+ qcode, QKeyCode_lookup[qcode]);
+ }
+ }
+ break;
+ case INPUT_EVENT_KIND_BTN:
+ if (keymap_button[evt->btn->button]) {
+ event.type = cpu_to_le16(EV_KEY);
+ event.code = cpu_to_le16(keymap_button[evt->btn->button]);
+ event.value = cpu_to_le32(evt->btn->down ? 1 : 0);
+ virtio_input_send(vinput, &event);
+ } else {
+ if (evt->btn->down) {
+ fprintf(stderr, "%s: unmapped button: %d [%s]\n", __func__,
+ evt->btn->button, InputButton_lookup[evt->btn->button]);
+ }
+ }
+ break;
+ case INPUT_EVENT_KIND_REL:
+ event.type = cpu_to_le16(EV_REL);
+ event.code = cpu_to_le16(axismap_rel[evt->rel->axis]);
+ event.value = cpu_to_le32(evt->rel->value);
+ virtio_input_send(vinput, &event);
+ break;
+ case INPUT_EVENT_KIND_ABS:
+ event.type = cpu_to_le16(EV_ABS);
+ event.code = cpu_to_le16(axismap_abs[evt->abs->axis]);
+ event.value = cpu_to_le32(evt->abs->value);
+ virtio_input_send(vinput, &event);
+ break;
+ default:
+ /* keep gcc happy */
+ break;
+ }
+}
+
+static void virtio_input_handle_sync(DeviceState *dev)
+{
+ VirtIOInput *vinput = VIRTIO_INPUT(dev);
+ virtio_input_event event = {
+ .type = cpu_to_le16(EV_SYN),
+ .code = cpu_to_le16(SYN_REPORT),
+ .value = 0,
+ };
+
+ virtio_input_send(vinput, &event);
+}
+
+static void virtio_input_hid_realize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(dev);
+ vhid->hs = qemu_input_handler_register(dev, vhid->handler);
+}
+
+static void virtio_input_hid_unrealize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(dev);
+ qemu_input_handler_unregister(vhid->hs);
+}
+
+static void virtio_input_hid_change_active(VirtIOInput *vinput)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(vinput);
+
+ if (vinput->active) {
+ qemu_input_handler_activate(vhid->hs);
+ } else {
+ qemu_input_handler_deactivate(vhid->hs);
+ }
+}
+
+static void virtio_input_hid_handle_status(VirtIOInput *vinput,
+ virtio_input_event *event)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(vinput);
+ int ledbit = 0;
+
+ switch (le16_to_cpu(event->type)) {
+ case EV_LED:
+ if (event->code == LED_NUML) {
+ ledbit = QEMU_NUM_LOCK_LED;
+ } else if (event->code == LED_CAPSL) {
+ ledbit = QEMU_CAPS_LOCK_LED;
+ } else if (event->code == LED_SCROLLL) {
+ ledbit = QEMU_SCROLL_LOCK_LED;
+ }
+ if (event->value) {
+ vhid->ledstate |= ledbit;
+ } else {
+ vhid->ledstate &= ~ledbit;
+ }
+ kbd_put_ledstate(vhid->ledstate);
+ break;
+ default:
+ fprintf(stderr, "%s: unknown type %d\n", __func__,
+ le16_to_cpu(event->type));
+ break;
+ }
+}
+
+static void virtio_input_hid_class_init(ObjectClass *klass, void *data)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_CLASS(klass);
+
+ vic->realize = virtio_input_hid_realize;
+ vic->unrealize = virtio_input_hid_unrealize;
+ vic->change_active = virtio_input_hid_change_active;
+ vic->handle_status = virtio_input_hid_handle_status;
+}
+
+static const TypeInfo virtio_input_hid_info = {
+ .name = TYPE_VIRTIO_INPUT_HID,
+ .parent = TYPE_VIRTIO_INPUT,
+ .instance_size = sizeof(VirtIOInputHID),
+ .class_init = virtio_input_hid_class_init,
+ .abstract = true,
+};
+
+/* ----------------------------------------------------------------- */
+
+static QemuInputHandler virtio_keyboard_handler = {
+ .name = VIRTIO_ID_NAME_KEYBOARD,
+ .mask = INPUT_EVENT_MASK_KEY,
+ .event = virtio_input_handle_event,
+ .sync = virtio_input_handle_sync,
+};
+
+static struct virtio_input_config virtio_keyboard_config[] = {
+ {
+ .select = VIRTIO_INPUT_CFG_ID_NAME,
+ .size = sizeof(VIRTIO_ID_NAME_KEYBOARD),
+ .u.string = VIRTIO_ID_NAME_KEYBOARD,
+ },{
+ .select = VIRTIO_INPUT_CFG_ID_DEVIDS,
+ .size = sizeof(struct virtio_input_devids),
+ .u.ids = {
+ .bustype = const_le16(BUS_VIRTUAL),
+ .vendor = const_le16(0x0627), /* same we use for usb hid devices */
+ .product = const_le16(0x0001),
+ .version = const_le16(0x0001),
+ },
+ },{
+ .select = VIRTIO_INPUT_CFG_EV_BITS,
+ .subsel = EV_REP,
+ .size = 1,
+ },{
+ .select = VIRTIO_INPUT_CFG_EV_BITS,
+ .subsel = EV_LED,
+ .size = 1,
+ .u.bitmap = {
+ (1 << LED_NUML) | (1 << LED_CAPSL) | (1 << LED_SCROLLL),
+ },
+ },
+ { /* end of list */ },
+};
+
+static void virtio_keyboard_init(Object *obj)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(obj);
+ VirtIOInput *vinput = VIRTIO_INPUT(obj);
+
+ vhid->handler = &virtio_keyboard_handler;
+ virtio_input_init_config(vinput, virtio_keyboard_config);
+ virtio_input_key_config(vinput, keymap_qcode,
+ ARRAY_SIZE(keymap_qcode));
+}
+
+static const TypeInfo virtio_keyboard_info = {
+ .name = TYPE_VIRTIO_KEYBOARD,
+ .parent = TYPE_VIRTIO_INPUT_HID,
+ .instance_size = sizeof(VirtIOInputHID),
+ .instance_init = virtio_keyboard_init,
+};
+
+/* ----------------------------------------------------------------- */
+
+static QemuInputHandler virtio_mouse_handler = {
+ .name = VIRTIO_ID_NAME_MOUSE,
+ .mask = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_REL,
+ .event = virtio_input_handle_event,
+ .sync = virtio_input_handle_sync,
+};
+
+static struct virtio_input_config virtio_mouse_config[] = {
+ {
+ .select = VIRTIO_INPUT_CFG_ID_NAME,
+ .size = sizeof(VIRTIO_ID_NAME_MOUSE),
+ .u.string = VIRTIO_ID_NAME_MOUSE,
+ },{
+ .select = VIRTIO_INPUT_CFG_ID_DEVIDS,
+ .size = sizeof(struct virtio_input_devids),
+ .u.ids = {
+ .bustype = const_le16(BUS_VIRTUAL),
+ .vendor = const_le16(0x0627), /* same we use for usb hid devices */
+ .product = const_le16(0x0002),
+ .version = const_le16(0x0001),
+ },
+ },{
+ .select = VIRTIO_INPUT_CFG_EV_BITS,
+ .subsel = EV_REL,
+ .size = 1,
+ .u.bitmap = {
+ (1 << REL_X) | (1 << REL_Y),
+ },
+ },
+ { /* end of list */ },
+};
+
+static void virtio_mouse_init(Object *obj)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(obj);
+ VirtIOInput *vinput = VIRTIO_INPUT(obj);
+
+ vhid->handler = &virtio_mouse_handler;
+ virtio_input_init_config(vinput, virtio_mouse_config);
+ virtio_input_key_config(vinput, keymap_button,
+ ARRAY_SIZE(keymap_button));
+}
+
+static const TypeInfo virtio_mouse_info = {
+ .name = TYPE_VIRTIO_MOUSE,
+ .parent = TYPE_VIRTIO_INPUT_HID,
+ .instance_size = sizeof(VirtIOInputHID),
+ .instance_init = virtio_mouse_init,
+};
+
+/* ----------------------------------------------------------------- */
+
+static QemuInputHandler virtio_tablet_handler = {
+ .name = VIRTIO_ID_NAME_TABLET,
+ .mask = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_ABS,
+ .event = virtio_input_handle_event,
+ .sync = virtio_input_handle_sync,
+};
+
+static struct virtio_input_config virtio_tablet_config[] = {
+ {
+ .select = VIRTIO_INPUT_CFG_ID_NAME,
+ .size = sizeof(VIRTIO_ID_NAME_TABLET),
+ .u.string = VIRTIO_ID_NAME_TABLET,
+ },{
+ .select = VIRTIO_INPUT_CFG_ID_DEVIDS,
+ .size = sizeof(struct virtio_input_devids),
+ .u.ids = {
+ .bustype = const_le16(BUS_VIRTUAL),
+ .vendor = const_le16(0x0627), /* same we use for usb hid devices */
+ .product = const_le16(0x0003),
+ .version = const_le16(0x0001),
+ },
+ },{
+ .select = VIRTIO_INPUT_CFG_EV_BITS,
+ .subsel = EV_ABS,
+ .size = 1,
+ .u.bitmap = {
+ (1 << ABS_X) | (1 << ABS_Y),
+ },
+ },{
+ .select = VIRTIO_INPUT_CFG_ABS_INFO,
+ .subsel = ABS_X,
+ .size = sizeof(virtio_input_absinfo),
+ .u.abs.max = const_le32(INPUT_EVENT_ABS_SIZE),
+ },{
+ .select = VIRTIO_INPUT_CFG_ABS_INFO,
+ .subsel = ABS_Y,
+ .size = sizeof(virtio_input_absinfo),
+ .u.abs.max = const_le32(INPUT_EVENT_ABS_SIZE),
+ },
+ { /* end of list */ },
+};
+
+static void virtio_tablet_init(Object *obj)
+{
+ VirtIOInputHID *vhid = VIRTIO_INPUT_HID(obj);
+ VirtIOInput *vinput = VIRTIO_INPUT(obj);
+
+ vhid->handler = &virtio_tablet_handler;
+ virtio_input_init_config(vinput, virtio_tablet_config);
+ virtio_input_key_config(vinput, keymap_button,
+ ARRAY_SIZE(keymap_button));
+}
+
+static const TypeInfo virtio_tablet_info = {
+ .name = TYPE_VIRTIO_TABLET,
+ .parent = TYPE_VIRTIO_INPUT_HID,
+ .instance_size = sizeof(VirtIOInputHID),
+ .instance_init = virtio_tablet_init,
+};
+
+/* ----------------------------------------------------------------- */
+
+static void virtio_register_types(void)
+{
+ type_register_static(&virtio_input_hid_info);
+ type_register_static(&virtio_keyboard_info);
+ type_register_static(&virtio_mouse_info);
+ type_register_static(&virtio_tablet_info);
+}
+
+type_init(virtio_register_types)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 4bfd927..f7d6b55 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -1891,6 +1891,12 @@ static const TypeInfo virtio_rng_pci_info = {
/* virtio-input-pci */
+static Property virtio_input_hid_pci_properties[] = {
+ DEFINE_VIRTIO_INPUT_PROPERTIES(VirtIOInputPCI, vdev.input),
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void virtio_input_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
VirtIOInputPCI *vinput = VIRTIO_INPUT_PCI(vpci_dev);
@@ -1915,6 +1921,49 @@ static void virtio_input_pci_class_init(ObjectClass *klass, void *data)
pcidev_k->class_id = PCI_CLASS_INPUT_OTHER;
}
+static void virtio_input_hid_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->props = virtio_input_hid_pci_properties;
+}
+
+static void virtio_input_hid_kbd_pci_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+
+ pcidev_k->class_id = PCI_CLASS_INPUT_KEYBOARD;
+}
+
+static void virtio_input_hid_mouse_pci_class_init(ObjectClass *klass,
+ void *data)
+{
+ PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+
+ pcidev_k->class_id = PCI_CLASS_INPUT_MOUSE;
+}
+
+static void virtio_keyboard_initfn(Object *obj)
+{
+ VirtIOInputHIDPCI *dev = VIRTIO_INPUT_HID_PCI(obj);
+ object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_KEYBOARD);
+ object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
+}
+
+static void virtio_mouse_initfn(Object *obj)
+{
+ VirtIOInputHIDPCI *dev = VIRTIO_INPUT_HID_PCI(obj);
+ object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_MOUSE);
+ object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
+}
+
+static void virtio_tablet_initfn(Object *obj)
+{
+ VirtIOInputHIDPCI *dev = VIRTIO_INPUT_HID_PCI(obj);
+ object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_TABLET);
+ object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
+}
+
static const TypeInfo virtio_input_pci_info = {
.name = TYPE_VIRTIO_INPUT_PCI,
.parent = TYPE_VIRTIO_PCI,
@@ -1923,6 +1972,37 @@ static const TypeInfo virtio_input_pci_info = {
.abstract = true,
};
+static const TypeInfo virtio_input_hid_pci_info = {
+ .name = TYPE_VIRTIO_INPUT_HID_PCI,
+ .parent = TYPE_VIRTIO_INPUT_PCI,
+ .instance_size = sizeof(VirtIOInputHIDPCI),
+ .class_init = virtio_input_hid_pci_class_init,
+ .abstract = true,
+};
+
+static const TypeInfo virtio_keyboard_pci_info = {
+ .name = TYPE_VIRTIO_KEYBOARD_PCI,
+ .parent = TYPE_VIRTIO_INPUT_HID_PCI,
+ .class_init = virtio_input_hid_kbd_pci_class_init,
+ .instance_size = sizeof(VirtIOInputHIDPCI),
+ .instance_init = virtio_keyboard_initfn,
+};
+
+static const TypeInfo virtio_mouse_pci_info = {
+ .name = TYPE_VIRTIO_MOUSE_PCI,
+ .parent = TYPE_VIRTIO_INPUT_HID_PCI,
+ .class_init = virtio_input_hid_mouse_pci_class_init,
+ .instance_size = sizeof(VirtIOInputHIDPCI),
+ .instance_init = virtio_mouse_initfn,
+};
+
+static const TypeInfo virtio_tablet_pci_info = {
+ .name = TYPE_VIRTIO_TABLET_PCI,
+ .parent = TYPE_VIRTIO_INPUT_HID_PCI,
+ .instance_size = sizeof(VirtIOInputHIDPCI),
+ .instance_init = virtio_tablet_initfn,
+};
+
/* virtio-pci-bus */
static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size,
@@ -1965,6 +2045,10 @@ static void virtio_pci_register_types(void)
{
type_register_static(&virtio_rng_pci_info);
type_register_static(&virtio_input_pci_info);
+ type_register_static(&virtio_input_hid_pci_info);
+ type_register_static(&virtio_keyboard_pci_info);
+ type_register_static(&virtio_mouse_pci_info);
+ type_register_static(&virtio_tablet_pci_info);
type_register_static(&virtio_pci_bus_info);
type_register_static(&virtio_pci_info);
#ifdef CONFIG_VIRTFS
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index 8a744eb..dbaca2b 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -41,6 +41,7 @@ typedef struct VirtIONetPCI VirtIONetPCI;
typedef struct VHostSCSIPCI VHostSCSIPCI;
typedef struct VirtIORngPCI VirtIORngPCI;
typedef struct VirtIOInputPCI VirtIOInputPCI;
+typedef struct VirtIOInputHIDPCI VirtIOInputHIDPCI;
/* virtio-pci-bus */
@@ -239,6 +240,18 @@ struct VirtIOInputPCI {
VirtIOInput vdev;
};
+#define TYPE_VIRTIO_INPUT_HID_PCI "virtio-input-hid-pci"
+#define TYPE_VIRTIO_KEYBOARD_PCI "virtio-keyboard-pci"
+#define TYPE_VIRTIO_MOUSE_PCI "virtio-mouse-pci"
+#define TYPE_VIRTIO_TABLET_PCI "virtio-tablet-pci"
+#define VIRTIO_INPUT_HID_PCI(obj) \
+ OBJECT_CHECK(VirtIOInputHIDPCI, (obj), TYPE_VIRTIO_INPUT_HID_PCI)
+
+struct VirtIOInputHIDPCI {
+ VirtIOPCIProxy parent_obj;
+ VirtIOInputHID vdev;
+};
+
/* Virtio ABI version, if we increment this, we break the guest driver. */
#define VIRTIO_PCI_ABI_VERSION 0
diff --git a/include/hw/virtio/virtio-input.h b/include/hw/virtio/virtio-input.h
index ad915cc..a265519 100644
--- a/include/hw/virtio/virtio-input.h
+++ b/include/hw/virtio/virtio-input.h
@@ -34,9 +34,23 @@ typedef struct virtio_input_event virtio_input_event;
#define VIRTIO_INPUT_CLASS(klass) \
OBJECT_CLASS_CHECK(VirtIOInputClass, klass, TYPE_VIRTIO_INPUT)
+#define TYPE_VIRTIO_INPUT_HID "virtio-input-hid"
+#define TYPE_VIRTIO_KEYBOARD "virtio-keyboard"
+#define TYPE_VIRTIO_MOUSE "virtio-mouse"
+#define TYPE_VIRTIO_TABLET "virtio-tablet"
+
+#define VIRTIO_INPUT_HID(obj) \
+ OBJECT_CHECK(VirtIOInputHID, (obj), TYPE_VIRTIO_INPUT_HID)
+#define VIRTIO_INPUT_HID_GET_PARENT_CLASS(obj) \
+ OBJECT_GET_PARENT_CLASS(obj, TYPE_VIRTIO_INPUT_HID)
+
+#define DEFINE_VIRTIO_INPUT_PROPERTIES(_state, _field) \
+ DEFINE_PROP_STRING("serial", _state, _field.serial)
+
typedef struct VirtIOInput VirtIOInput;
typedef struct VirtIOInputClass VirtIOInputClass;
typedef struct VirtIOInputConfig VirtIOInputConfig;
+typedef struct VirtIOInputHID VirtIOInputHID;
struct virtio_input_conf {
char *serial;
@@ -73,6 +87,13 @@ struct VirtIOInputClass {
void (*handle_status)(VirtIOInput *vinput, virtio_input_event *event);
};
+struct VirtIOInputHID {
+ VirtIOInput parent_obj;
+ QemuInputHandler *handler;
+ QemuInputHandlerState *hs;
+ int ledstate;
+};
+
void virtio_input_send(VirtIOInput *vinput, virtio_input_event *event);
void virtio_input_init_config(VirtIOInput *vinput,
virtio_input_config *config);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
` (4 preceding siblings ...)
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 5/6] virtio-input: emulated devices Gerd Hoffmann
@ 2015-03-26 11:26 ` Gerd Hoffmann
2015-04-02 22:24 ` Marc-André Lureau
5 siblings, 1 reply; 9+ messages in thread
From: Gerd Hoffmann @ 2015-03-26 11:26 UTC (permalink / raw)
To: qemu-devel; +Cc: virtio-dev, Gerd Hoffmann, mst
This allows to assign host input devices to the guest:
qemu -device virto-input-host-pci,evdev=/dev/input/event<nr>
The guest gets exclusive access to the input device, so be careful
with assigning the keyboard if you have only one connected to your
machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/input/Makefile.objs | 1 +
hw/input/virtio-input-host.c | 182 +++++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 30 +++++++
hw/virtio/virtio-pci.h | 10 +++
include/hw/virtio/virtio-input.h | 13 +++
5 files changed, 236 insertions(+)
create mode 100644 hw/input/virtio-input-host.c
diff --git a/hw/input/Makefile.objs b/hw/input/Makefile.objs
index 0dae710..624ba7e 100644
--- a/hw/input/Makefile.objs
+++ b/hw/input/Makefile.objs
@@ -11,6 +11,7 @@ common-obj-$(CONFIG_VMMOUSE) += vmmouse.o
ifeq ($(CONFIG_LINUX),y)
common-obj-$(CONFIG_VIRTIO) += virtio-input.o
common-obj-$(CONFIG_VIRTIO) += virtio-input-hid.o
+common-obj-$(CONFIG_VIRTIO) += virtio-input-host.o
endif
obj-$(CONFIG_MILKYMIST) += milkymist-softusb.o
diff --git a/hw/input/virtio-input-host.c b/hw/input/virtio-input-host.c
new file mode 100644
index 0000000..b16cc4c
--- /dev/null
+++ b/hw/input/virtio-input-host.c
@@ -0,0 +1,182 @@
+/*
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#include "qemu-common.h"
+#include "qemu/sockets.h"
+
+#include "hw/qdev.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-input.h"
+
+#include "standard-headers/linux/input.h"
+
+/* ----------------------------------------------------------------- */
+
+static struct virtio_input_config virtio_input_host_config[] = {
+ { /* empty list */ },
+};
+
+static void virtio_input_host_event(void *opaque)
+{
+ VirtIOInputHost *vih = opaque;
+ VirtIOInput *vinput = VIRTIO_INPUT(vih);
+ struct virtio_input_event virtio;
+ struct input_event evdev;
+ int rc;
+
+ for (;;) {
+ rc = read(vih->fd, &evdev, sizeof(evdev));
+ if (rc != sizeof(evdev)) {
+ break;
+ }
+
+ virtio.type = cpu_to_le16(evdev.type);
+ virtio.code = cpu_to_le16(evdev.code);
+ virtio.value = cpu_to_le32(evdev.value);
+ virtio_input_send(vinput, &virtio);
+ }
+}
+
+static void virtio_input_bits_config(VirtIOInputHost *vih,
+ int type, int count)
+{
+ virtio_input_config bits;
+ int rc, i, size = 0;
+
+ memset(&bits, 0, sizeof(bits));
+ rc = ioctl(vih->fd, EVIOCGBIT(type, count/8), bits.u.bitmap);
+ if (rc < 0) {
+ return;
+ }
+
+ for (i = 0; i < count/8; i++) {
+ if (bits.u.bitmap[i]) {
+ size = i+1;
+ }
+ }
+ if (size == 0) {
+ return;
+ }
+
+ bits.select = VIRTIO_INPUT_CFG_EV_BITS;
+ bits.subsel = type;
+ bits.size = size;
+ virtio_input_add_config(VIRTIO_INPUT(vih), &bits);
+}
+
+static void virtio_input_host_realize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputHost *vih = VIRTIO_INPUT_HOST(dev);
+ VirtIOInput *vinput = VIRTIO_INPUT(dev);
+ virtio_input_config id;
+ struct input_id ids;
+ int rc, ver;
+
+ if (!vih->evdev) {
+ error_setg(errp, "evdev property is required");
+ return;
+ }
+
+ vih->fd = open(vih->evdev, O_RDWR);
+ if (vih->fd < 0) {
+ error_setg_file_open(errp, errno, vih->evdev);
+ return;
+ }
+ qemu_set_nonblock(vih->fd);
+
+ rc = ioctl(vih->fd, EVIOCGVERSION, &ver);
+ if (rc < 0) {
+ error_setg(errp, "%s: is not an evdev device", vih->evdev);
+ goto err_close;
+ }
+
+ rc = ioctl(vih->fd, EVIOCGRAB, 1);
+ if (rc < 0) {
+ error_setg_errno(errp, errno, "%s: failed to get exclusive access",
+ vih->evdev);
+ goto err_close;
+ }
+
+ memset(&id, 0, sizeof(id));
+ ioctl(vih->fd, EVIOCGNAME(sizeof(id.u.string)-1), id.u.string);
+ id.select = VIRTIO_INPUT_CFG_ID_NAME;
+ id.size = strlen(id.u.string);
+ virtio_input_add_config(vinput, &id);
+
+ if (ioctl(vih->fd, EVIOCGID, &ids) == 0) {
+ memset(&id, 0, sizeof(id));
+ id.select = VIRTIO_INPUT_CFG_ID_DEVIDS;
+ id.size = sizeof(struct virtio_input_devids);
+ id.u.ids.bustype = cpu_to_le16(ids.bustype);
+ id.u.ids.vendor = cpu_to_le16(ids.vendor);
+ id.u.ids.product = cpu_to_le16(ids.product);
+ id.u.ids.version = cpu_to_le16(ids.version);
+ virtio_input_add_config(vinput, &id);
+ }
+
+ virtio_input_bits_config(vih, EV_KEY, KEY_CNT);
+ virtio_input_bits_config(vih, EV_REL, REL_CNT);
+ virtio_input_bits_config(vih, EV_ABS, ABS_CNT);
+ virtio_input_bits_config(vih, EV_MSC, MSC_CNT);
+ virtio_input_bits_config(vih, EV_SW, SW_CNT);
+
+ qemu_set_fd_handler(vih->fd, virtio_input_host_event, NULL, vih);
+ return;
+
+err_close:
+ close(vih->fd);
+ vih->fd = -1;
+ return;
+}
+
+static void virtio_input_host_unrealize(DeviceState *dev, Error **errp)
+{
+ VirtIOInputHost *vih = VIRTIO_INPUT_HOST(dev);
+
+ if (vih->fd > 0) {
+ qemu_set_fd_handler(vih->fd, NULL, NULL, NULL);
+ close(vih->fd);
+ }
+}
+
+static const VMStateDescription vmstate_virtio_input_host = {
+ .name = "virtio-input-host",
+ .unmigratable = 1,
+};
+
+static void virtio_input_host_class_init(ObjectClass *klass, void *data)
+{
+ VirtIOInputClass *vic = VIRTIO_INPUT_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->vmsd = &vmstate_virtio_input_host;
+ vic->realize = virtio_input_host_realize;
+ vic->unrealize = virtio_input_host_unrealize;
+}
+
+static void virtio_input_host_init(Object *obj)
+{
+ VirtIOInput *vinput = VIRTIO_INPUT(obj);
+
+ virtio_input_init_config(vinput, virtio_input_host_config);
+}
+
+static const TypeInfo virtio_input_host_info = {
+ .name = TYPE_VIRTIO_INPUT_HOST,
+ .parent = TYPE_VIRTIO_INPUT,
+ .instance_size = sizeof(VirtIOInputHost),
+ .instance_init = virtio_input_host_init,
+ .class_init = virtio_input_host_class_init,
+};
+
+/* ----------------------------------------------------------------- */
+
+static void virtio_register_types(void)
+{
+ type_register_static(&virtio_input_host_info);
+}
+
+type_init(virtio_register_types)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index f7d6b55..d1b02b3 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -1897,6 +1897,13 @@ static Property virtio_input_hid_pci_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
+static Property virtio_input_host_pci_properties[] = {
+ DEFINE_VIRTIO_INPUT_PROPERTIES(VirtIOInputPCI, vdev.input),
+ DEFINE_PROP_STRING("evdev", VirtIOInputHostPCI, vdev.evdev),
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void virtio_input_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
VirtIOInputPCI *vinput = VIRTIO_INPUT_PCI(vpci_dev);
@@ -1943,6 +1950,13 @@ static void virtio_input_hid_mouse_pci_class_init(ObjectClass *klass,
pcidev_k->class_id = PCI_CLASS_INPUT_MOUSE;
}
+static void virtio_input_host_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->props = virtio_input_host_pci_properties;
+}
+
static void virtio_keyboard_initfn(Object *obj)
{
VirtIOInputHIDPCI *dev = VIRTIO_INPUT_HID_PCI(obj);
@@ -1964,6 +1978,13 @@ static void virtio_tablet_initfn(Object *obj)
object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
}
+static void virtio_host_initfn(Object *obj)
+{
+ VirtIOInputHostPCI *dev = VIRTIO_INPUT_HOST_PCI(obj);
+ object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_INPUT_HOST);
+ object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
+}
+
static const TypeInfo virtio_input_pci_info = {
.name = TYPE_VIRTIO_INPUT_PCI,
.parent = TYPE_VIRTIO_PCI,
@@ -2003,6 +2024,14 @@ static const TypeInfo virtio_tablet_pci_info = {
.instance_init = virtio_tablet_initfn,
};
+static const TypeInfo virtio_host_pci_info = {
+ .name = TYPE_VIRTIO_INPUT_HOST_PCI,
+ .parent = TYPE_VIRTIO_INPUT_PCI,
+ .instance_size = sizeof(VirtIOInputHostPCI),
+ .instance_init = virtio_host_initfn,
+ .class_init = virtio_input_host_pci_class_init,
+};
+
/* virtio-pci-bus */
static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size,
@@ -2049,6 +2078,7 @@ static void virtio_pci_register_types(void)
type_register_static(&virtio_keyboard_pci_info);
type_register_static(&virtio_mouse_pci_info);
type_register_static(&virtio_tablet_pci_info);
+ type_register_static(&virtio_host_pci_info);
type_register_static(&virtio_pci_bus_info);
type_register_static(&virtio_pci_info);
#ifdef CONFIG_VIRTFS
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index dbaca2b..fc58539 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -42,6 +42,7 @@ typedef struct VHostSCSIPCI VHostSCSIPCI;
typedef struct VirtIORngPCI VirtIORngPCI;
typedef struct VirtIOInputPCI VirtIOInputPCI;
typedef struct VirtIOInputHIDPCI VirtIOInputHIDPCI;
+typedef struct VirtIOInputHostPCI VirtIOInputHostPCI;
/* virtio-pci-bus */
@@ -252,6 +253,15 @@ struct VirtIOInputHIDPCI {
VirtIOInputHID vdev;
};
+#define TYPE_VIRTIO_INPUT_HOST_PCI "virtio-input-host-pci"
+#define VIRTIO_INPUT_HOST_PCI(obj) \
+ OBJECT_CHECK(VirtIOInputHostPCI, (obj), TYPE_VIRTIO_INPUT_HOST_PCI)
+
+struct VirtIOInputHostPCI {
+ VirtIOPCIProxy parent_obj;
+ VirtIOInputHost vdev;
+};
+
/* Virtio ABI version, if we increment this, we break the guest driver. */
#define VIRTIO_PCI_ABI_VERSION 0
diff --git a/include/hw/virtio/virtio-input.h b/include/hw/virtio/virtio-input.h
index a265519..2e9e8c0 100644
--- a/include/hw/virtio/virtio-input.h
+++ b/include/hw/virtio/virtio-input.h
@@ -44,6 +44,12 @@ typedef struct virtio_input_event virtio_input_event;
#define VIRTIO_INPUT_HID_GET_PARENT_CLASS(obj) \
OBJECT_GET_PARENT_CLASS(obj, TYPE_VIRTIO_INPUT_HID)
+#define TYPE_VIRTIO_INPUT_HOST "virtio-input-host"
+#define VIRTIO_INPUT_HOST(obj) \
+ OBJECT_CHECK(VirtIOInputHost, (obj), TYPE_VIRTIO_INPUT_HOST)
+#define VIRTIO_INPUT_HOST_GET_PARENT_CLASS(obj) \
+ OBJECT_GET_PARENT_CLASS(obj, TYPE_VIRTIO_INPUT_HOST)
+
#define DEFINE_VIRTIO_INPUT_PROPERTIES(_state, _field) \
DEFINE_PROP_STRING("serial", _state, _field.serial)
@@ -51,6 +57,7 @@ typedef struct VirtIOInput VirtIOInput;
typedef struct VirtIOInputClass VirtIOInputClass;
typedef struct VirtIOInputConfig VirtIOInputConfig;
typedef struct VirtIOInputHID VirtIOInputHID;
+typedef struct VirtIOInputHost VirtIOInputHost;
struct virtio_input_conf {
char *serial;
@@ -94,6 +101,12 @@ struct VirtIOInputHID {
int ledstate;
};
+struct VirtIOInputHost {
+ VirtIOInput parent_obj;
+ char *evdev;
+ int fd;
+};
+
void virtio_input_send(VirtIOInput *vinput, virtio_input_event *event);
void virtio_input_init_config(VirtIOInput *vinput,
virtio_input_config *config);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough Gerd Hoffmann
@ 2015-04-02 22:24 ` Marc-André Lureau
2015-04-07 7:53 ` Gerd Hoffmann
0 siblings, 1 reply; 9+ messages in thread
From: Marc-André Lureau @ 2015-04-02 22:24 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: virtio-dev, QEMU, Michael S. Tsirkin
[-- Attachment #1: Type: text/plain, Size: 535 bytes --]
Hi
On Thu, Mar 26, 2015 at 12:26 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> This allows to assign host input devices to the guest:
>
> qemu -device virto-input-host-pci,evdev=/dev/input/event<nr>
>
>
nitpicking, virto/virtio
The guest gets exclusive access to the input device, so be careful
> with assigning the keyboard if you have only one connected to your
> machine.
>
Why does it need exclusive access?
(btw, is anyone working on a windows version of the guest driver?)
--
Marc-André Lureau
[-- Attachment #2: Type: text/html, Size: 1391 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough
2015-04-02 22:24 ` Marc-André Lureau
@ 2015-04-07 7:53 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2015-04-07 7:53 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: virtio-dev, QEMU, Michael S. Tsirkin
On Fr, 2015-04-03 at 00:24 +0200, Marc-André Lureau wrote:
> Hi
>
>
> On Thu, Mar 26, 2015 at 12:26 PM, Gerd Hoffmann <kraxel@redhat.com>
> wrote:
> This allows to assign host input devices to the guest:
>
> qemu -device virto-input-host-pci,evdev=/dev/input/event<nr>
>
>
>
> nitpicking, virto/virtio
Fixed.
> The guest gets exclusive access to the input device, so be
> careful
> with assigning the keyboard if you have only one connected to
> your
> machine.
>
> Why does it need exclusive access?
Because otherwise both host and guest are seeing the keystrokes (or
other events). That most likely is not what you want ...
Try commenting out the EVIOCGRAB ioctl if you wanna see the effects ;)
> (btw, is anyone working on a windows version of the guest driver?)
Not that I know of.
cheers,
Gerd
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-04-07 7:53 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-26 11:26 [Qemu-devel] [PATCH v3 0/6] virtio: add input device Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 1/6] pci: add PCI_CLASS_INPUT_* Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 2/6] virtio-input: add virtio_input.h Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 3/6] virtio-input: add linux/input.h Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 4/6] virtio-input: core code & base class Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 5/6] virtio-input: emulated devices Gerd Hoffmann
2015-03-26 11:26 ` [Qemu-devel] [PATCH v3 6/6] virtio-input: evdev passthrough Gerd Hoffmann
2015-04-02 22:24 ` Marc-André Lureau
2015-04-07 7:53 ` Gerd Hoffmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.