Re: [PATCH v5 2/3] I2C: mediatek: Add driver for MediaTek I2C controller

From: Eddie Huang <eddie.huang@mediatek.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	"Wolfram Sang" <wsa@the-dreams.de>,
	"Doug Anderson" <dianders@chromium.org>,
	"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
	"David Box" <david.e.box@linux.intel.com>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Jean Delvare" <jdelvare@suse.de>,
	"Xudong Chen (陈旭东)" <Xudong.Chen@mediatek.com>,
	"Boris BREZILLON" <boris.brezillon@free-electrons.com>,
	"Pawel Moll" <pawel.moll@arm.com>,
	"Liguo Zhang (张立国)" <Liguo.Zhang@mediatek.com>,
	"Wei Yan" <sledge.yanwei@huawei.com>,
	"Bjorn Andersson" <bjorn.andersson@sonymobile.com>,
	"Uwe Kleine-Konig" <u.kleine-koenig@pengutronix.de>,
	"Neelesh Gupta" <neelegup@linux.vnet.ibm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
	"Beniamino Galvani" <b.galvani@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"linux-mediatek@lists.infradead.org"
	<linux-mediatek@lists.infradead.org>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	srv_heupstream <srv_heupstream@mediatek.com>,
	"Anders Berg" <anders.berg@avagotech.com>,
	"Jim Cromie" <jim.cromie@gmail.com>,
	"Simon Glass" <sjg@chromium.org>,
	"Max Schwarz" <max.schwarz@online.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Sascha Hauer" <kernel@pengutronix.de>,
	"Kumar Gala" <galak@codeaurora.org>
Subject: Re: [PATCH v5 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
Date: Tue, 31 Mar 2015 19:50:58 +0800	[thread overview]
Message-ID: <1427802658.32196.8.camel@mtksdaap41> (raw)
In-Reply-To: <1427785715.3500.16.camel@mtksdaap41>

Hi Sascha,

On Tue, 2015-03-31 at 15:08 +0800, Eddie Huang wrote:
> Hi Sascha,
> 
> On Mon, 2015-03-30 at 19:23 +0200, Sascha Hauer wrote:
> > On Mon, Mar 30, 2015 at 04:14:12PM +0800, Eddie Huang wrote:
> > > Hi Sascha,
> > >
> > > >
> > > > [...]
> > > >
> > > > > +       if (i2c->speed_hz > 400000)
> > > > > +               control_reg |= I2C_CONTROL_RS;
> > > > > +       if (i2c->op == I2C_MASTER_WRRD)
> > > > > +               control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS;
> > > > > +       mtk_i2c_writew(control_reg, i2c, OFFSET_CONTROL);
> > > > > +
> > > > > +       /* set start condition */
> > > > > +       if (i2c->speed_hz <= 100000)
> > > > > +               mtk_i2c_writew(I2C_ST_START_CON, i2c, OFFSET_EXT_CONF);
> > > > > +       else
> > > > > +               mtk_i2c_writew(I2C_FS_START_CON, i2c, OFFSET_EXT_CONF);
> > > > > +
> > > > > +       if (~control_reg & I2C_CONTROL_RS)
> > > > > +               mtk_i2c_writew(I2C_DELAY_LEN, i2c, OFFSET_DELAY_LEN);
> > > >
> > > > speed <= 400000 here to make this more obvious?
> > > There are two cases, not only speed<=400000, but I2C_MASTER_WRRD. I tend
> > > to keep it.
> >
> > Still it looks strange. You only ever write this default value to the
> > register. Putting this register write under an if() seems bogus since
> > the same value will be in the register the next time this code is
> > executed. It looks like you should move this register write to some
> > initialization function.
> OK, move to mtk_i2c_init_hw function
> 
Sorry for my negligence. Write-then-read (I2C_MASTER_WRRD) decides
according to each I2C transfer, so I still need to judge whether set
I2C_CONTROL_RS and DELAY_LEN here. Other control setting can move to
init function.

Eddie