From: Peter Oh <poh@qca.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org> Subject: [PATCH 2/2] ath: lower JP W53 band DFS detection threshold around 30% Date: Tue, 31 Mar 2015 11:16:25 -0700 [thread overview] Message-ID: <1427825785-21389-2-git-send-email-poh@qca.qualcomm.com> (raw) In-Reply-To: <1427825785-21389-1-git-send-email-poh@qca.qualcomm.com> Japan's W53 band requires 50% data traffic during its DFS test, but WLAN baseband used by ath9k and ath10k is not able to achieve current threshold rate, 50%, under the data traffic rate. In other words, HW occasionally fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the rate. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> --- drivers/net/wireless/ath/dfs_pattern_detector.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c index 8d1e082..7ad1932 100644 --- a/drivers/net/wireless/ath/dfs_pattern_detector.c +++ b/drivers/net/wireless/ath/dfs_pattern_detector.c @@ -105,8 +105,8 @@ static const struct radar_types fcc_radar_types = { PPB_THRESH_JP(PPB, RATE), PRI_TOLERANCE, CHIRP \ } static const struct radar_detector_specs jp_radar_ref_types[] = { - JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 50, false), - JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 50, false), + JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false), + JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false), JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false), JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false), JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false), -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Peter Oh <poh@qca.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH 2/2] ath: lower JP W53 band DFS detection threshold around 30% Date: Tue, 31 Mar 2015 11:16:25 -0700 [thread overview] Message-ID: <1427825785-21389-2-git-send-email-poh@qca.qualcomm.com> (raw) In-Reply-To: <1427825785-21389-1-git-send-email-poh@qca.qualcomm.com> Japan's W53 band requires 50% data traffic during its DFS test, but WLAN baseband used by ath9k and ath10k is not able to achieve current threshold rate, 50%, under the data traffic rate. In other words, HW occasionally fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the rate. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> --- drivers/net/wireless/ath/dfs_pattern_detector.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c index 8d1e082..7ad1932 100644 --- a/drivers/net/wireless/ath/dfs_pattern_detector.c +++ b/drivers/net/wireless/ath/dfs_pattern_detector.c @@ -105,8 +105,8 @@ static const struct radar_types fcc_radar_types = { PPB_THRESH_JP(PPB, RATE), PRI_TOLERANCE, CHIRP \ } static const struct radar_detector_specs jp_radar_ref_types[] = { - JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 50, false), - JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 50, false), + JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false), + JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false), JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false), JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false), JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false), -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-03-31 18:17 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-03-31 18:16 [PATCH 1/2] ath: define JP DFS patterns separated from FCC Peter Oh 2015-03-31 18:16 ` Peter Oh 2015-03-31 18:16 ` Peter Oh [this message] 2015-03-31 18:16 ` [PATCH 2/2] ath: lower JP W53 band DFS detection threshold around 30% Peter Oh 2015-03-31 23:17 ` [PATCH 1/2] ath: define JP DFS patterns separated from FCC Julian Calaby 2015-03-31 23:17 ` Julian Calaby 2015-03-31 23:31 ` Peter Oh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1427825785-21389-2-git-send-email-poh@qca.qualcomm.com \ --to=poh@qca.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.