From: Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
afaerber-l3A5Bk7waGM@public.gmane.org,
geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
stefan-XLVq0VzYD2Y@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org,
peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org,
andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Daniel Lezcano
<daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org
Cc: Jonathan Corbet <corbet-T1hC0tSOHrs@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Jiri Slaby <jslaby-AlSwsSmVLrQ@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Mauro Carvalho Chehab
<mchehab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
Antti Palosaari <crope-X3B1VOXEql0@public.gmane.org>,
Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Nikolay Borisov <Nikolay.Borisov-5wv7dgnIgG8@public.gmane.org>,
Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>,
Kees Cook <keescook-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Michal Marek <mmarek-AlSwsSmVLrQ@public.gmane.org>,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arch-u79uwXL29TZNg+MwTxZMZA@public.gmane.org
Subject: [PATCH v6 00/15] Add support to STMicroelectronics STM32 family
Date: Tue, 7 Apr 2015 18:30:19 +0200 [thread overview]
Message-ID: <1428424234-28572-1-git-send-email-mcoquelin.stm32@gmail.com> (raw)
This sixth round adds minor fixes to USART driver, and adds some Acks.
STM32 MCUs are Cortex-M CPU, used in various applications (consumer
electronics, industrial applications, hobbyists...).
Datasheets, user and programming manuals are publicly available on
STMicroelectronics website.
With this series applied, the STM32F419 Discovery can boot succesfully.
Changes since v5:
-----------------
- Change st,hw-flow-ctrl property to auto-flow-control (Rob)
- Constify stm32_uart_ops (Joe)
- Propagate request_irq error in USART driver (Andy)
- Applies Acked-by and Reviewed-by (Rob, Peter)
Changes since v4:
-----------------
- Cosmetic changes in USART driver (Andy)
- Apply Acks on reset driver & bindings (Philipp & Rob)
Changes since v3:
-----------------
- Fix and simplify error path in ARMv7-M Systick driver (Daniel)
- Improve reset bindings documentation (Philipp)
- Fix trailing lines anf typos in reset driver & doc (Philipp & Chanwoo)
- Fix MODULE_LICENCE in USART driver (Paul)
- Refactor USART baudrate calculation (Peter & Andy)
- Fix error path in USART init (Peter & Russell)
- Fix HW flow control in USART driver (Peter)
- Fix serial port type number to unused one (Peter)
- Applies Chanwoo's Tested-by on the series
Changes since v2:
-----------------
- Remove pinctrl driver from the series.
- Remove reset_controller_of_init(), and reset the timers in the bootloader
- Add HW flow contrl property for serial driver
- Lots of changes in the DTS file, as per Andreas recommendations
- Some Kconfig clean-ups
- Adapt the config to be compatible with Andreas' bootwrapper, except UART port.
- Various fixes in documentation
Changes since v1:
-----------------
- Move bindings documentation in their own patches (Andreas)
- Rename ARM System timer to armv7m-systick (Rob)
- Add clock-frequency property handling in armv7m-systick (Rob)
- Re-factor the reset controllers into a single controller (Philipp)
- Add kerneldoc to reset_controller_of_init (Philipp)
- Add named constants in include/dt-bindings/reset/ (Philipp)
- Make pinctrl driver to depend on ARCH_STM32 or COMPILE_TEST (Geert)
- Introduce CPUV7M_NUM_IRQ config flag to indicate the number of interrupts
supported by the MCU, in order to limit memory waste in vectors' table (Uwe)
Maxime Coquelin (15):
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP
Kernel
ARM: ARMv7-M: Enlarge vector table up to 256 entries
dt-bindings: Document the ARM System timer bindings
clocksource/drivers: Add ARM System timer driver
dt-bindings: Document the STM32 reset bindings
drivers: reset: Add STM32 reset driver
dt-bindings: Document the STM32 timer bindings
clockevents/drivers: Add STM32 Timer driver
dt-bindings: Document the STM32 USART bindings
serial: stm32-usart: Add STM32 USART Driver
ARM: Add STM32 family machine
ARM: dts: Add ARM System timer as clockevent in armv7m
ARM: dts: Introduce STM32F429 MCU
ARM: configs: Add STM32 defconfig
MAINTAINERS: Add entry for STM32 MCUs
Documentation/arm/stm32/overview.txt | 32 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 +
.../devicetree/bindings/arm/armv7m_systick.txt | 26 +
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 +
.../devicetree/bindings/timer/st,stm32-timer.txt | 22 +
MAINTAINERS | 8 +
arch/arm/Kconfig | 18 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 6 +
arch/arm/boot/dts/stm32f429-disco.dts | 71 ++
arch/arm/boot/dts/stm32f429.dtsi | 226 +++++++
arch/arm/configs/stm32_defconfig | 71 ++
arch/arm/kernel/entry-v7m.S | 13 +-
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 3 +
arch/arm/mach-stm32/board-dt.c | 19 +
arch/arm/mm/Kconfig | 15 +
drivers/clocksource/Kconfig | 15 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/armv7m_systick.c | 79 +++
drivers/clocksource/timer-stm32.c | 184 ++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 124 ++++
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 735 +++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
scripts/link-vmlinux.sh | 2 +-
30 files changed, 1852 insertions(+), 5 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
create mode 100644 arch/arm/configs/stm32_defconfig
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
create mode 100644 drivers/clocksource/armv7m_systick.c
create mode 100644 drivers/clocksource/timer-stm32.c
create mode 100644 drivers/reset/reset-stm32.c
create mode 100644 drivers/tty/serial/stm32-usart.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: u.kleine-koenig@pengutronix.de, afaerber@suse.de,
geert@linux-m68k.org, Rob Herring <robh+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
stefan@agner.ch, pmeerw@pmeerw.net, pebolle@tiscali.nl,
peter@hurleysoftware.com, andy.shevchenko@gmail.com,
cw00.choi@samsung.com, Russell King <linux@arm.linux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
joe@perches.com
Cc: Jonathan Corbet <corbet@lwn.net>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.cz>,
Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Antti Palosaari <crope@iki.fi>, Tejun Heo <tj@kernel.org>,
Will Deacon <will.deacon@arm.com>,
Nikolay Borisov <Nikolay.Borisov@arm.com>,
Rusty Russell <rusty@rustcorp.com.au>,
Kees Cook <keescook@chromium.org>, Michal Marek <mmarek@suse.cz>,
linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arch@vger.kernel.org, linux-api@vger.kernel.org,
mcoquelin.stm32@gmail.com
Subject: [PATCH v6 00/15] Add support to STMicroelectronics STM32 family
Date: Tue, 7 Apr 2015 18:30:19 +0200 [thread overview]
Message-ID: <1428424234-28572-1-git-send-email-mcoquelin.stm32@gmail.com> (raw)
This sixth round adds minor fixes to USART driver, and adds some Acks.
STM32 MCUs are Cortex-M CPU, used in various applications (consumer
electronics, industrial applications, hobbyists...).
Datasheets, user and programming manuals are publicly available on
STMicroelectronics website.
With this series applied, the STM32F419 Discovery can boot succesfully.
Changes since v5:
-----------------
- Change st,hw-flow-ctrl property to auto-flow-control (Rob)
- Constify stm32_uart_ops (Joe)
- Propagate request_irq error in USART driver (Andy)
- Applies Acked-by and Reviewed-by (Rob, Peter)
Changes since v4:
-----------------
- Cosmetic changes in USART driver (Andy)
- Apply Acks on reset driver & bindings (Philipp & Rob)
Changes since v3:
-----------------
- Fix and simplify error path in ARMv7-M Systick driver (Daniel)
- Improve reset bindings documentation (Philipp)
- Fix trailing lines anf typos in reset driver & doc (Philipp & Chanwoo)
- Fix MODULE_LICENCE in USART driver (Paul)
- Refactor USART baudrate calculation (Peter & Andy)
- Fix error path in USART init (Peter & Russell)
- Fix HW flow control in USART driver (Peter)
- Fix serial port type number to unused one (Peter)
- Applies Chanwoo's Tested-by on the series
Changes since v2:
-----------------
- Remove pinctrl driver from the series.
- Remove reset_controller_of_init(), and reset the timers in the bootloader
- Add HW flow contrl property for serial driver
- Lots of changes in the DTS file, as per Andreas recommendations
- Some Kconfig clean-ups
- Adapt the config to be compatible with Andreas' bootwrapper, except UART port.
- Various fixes in documentation
Changes since v1:
-----------------
- Move bindings documentation in their own patches (Andreas)
- Rename ARM System timer to armv7m-systick (Rob)
- Add clock-frequency property handling in armv7m-systick (Rob)
- Re-factor the reset controllers into a single controller (Philipp)
- Add kerneldoc to reset_controller_of_init (Philipp)
- Add named constants in include/dt-bindings/reset/ (Philipp)
- Make pinctrl driver to depend on ARCH_STM32 or COMPILE_TEST (Geert)
- Introduce CPUV7M_NUM_IRQ config flag to indicate the number of interrupts
supported by the MCU, in order to limit memory waste in vectors' table (Uwe)
Maxime Coquelin (15):
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP
Kernel
ARM: ARMv7-M: Enlarge vector table up to 256 entries
dt-bindings: Document the ARM System timer bindings
clocksource/drivers: Add ARM System timer driver
dt-bindings: Document the STM32 reset bindings
drivers: reset: Add STM32 reset driver
dt-bindings: Document the STM32 timer bindings
clockevents/drivers: Add STM32 Timer driver
dt-bindings: Document the STM32 USART bindings
serial: stm32-usart: Add STM32 USART Driver
ARM: Add STM32 family machine
ARM: dts: Add ARM System timer as clockevent in armv7m
ARM: dts: Introduce STM32F429 MCU
ARM: configs: Add STM32 defconfig
MAINTAINERS: Add entry for STM32 MCUs
Documentation/arm/stm32/overview.txt | 32 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 +
.../devicetree/bindings/arm/armv7m_systick.txt | 26 +
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 +
.../devicetree/bindings/timer/st,stm32-timer.txt | 22 +
MAINTAINERS | 8 +
arch/arm/Kconfig | 18 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 6 +
arch/arm/boot/dts/stm32f429-disco.dts | 71 ++
arch/arm/boot/dts/stm32f429.dtsi | 226 +++++++
arch/arm/configs/stm32_defconfig | 71 ++
arch/arm/kernel/entry-v7m.S | 13 +-
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 3 +
arch/arm/mach-stm32/board-dt.c | 19 +
arch/arm/mm/Kconfig | 15 +
drivers/clocksource/Kconfig | 15 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/armv7m_systick.c | 79 +++
drivers/clocksource/timer-stm32.c | 184 ++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 124 ++++
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 735 +++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
scripts/link-vmlinux.sh | 2 +-
30 files changed, 1852 insertions(+), 5 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
create mode 100644 arch/arm/configs/stm32_defconfig
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
create mode 100644 drivers/clocksource/armv7m_systick.c
create mode 100644 drivers/clocksource/timer-stm32.c
create mode 100644 drivers/reset/reset-stm32.c
create mode 100644 drivers/tty/serial/stm32-usart.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 00/15] Add support to STMicroelectronics STM32 family
Date: Tue, 7 Apr 2015 18:30:19 +0200 [thread overview]
Message-ID: <1428424234-28572-1-git-send-email-mcoquelin.stm32@gmail.com> (raw)
This sixth round adds minor fixes to USART driver, and adds some Acks.
STM32 MCUs are Cortex-M CPU, used in various applications (consumer
electronics, industrial applications, hobbyists...).
Datasheets, user and programming manuals are publicly available on
STMicroelectronics website.
With this series applied, the STM32F419 Discovery can boot succesfully.
Changes since v5:
-----------------
- Change st,hw-flow-ctrl property to auto-flow-control (Rob)
- Constify stm32_uart_ops (Joe)
- Propagate request_irq error in USART driver (Andy)
- Applies Acked-by and Reviewed-by (Rob, Peter)
Changes since v4:
-----------------
- Cosmetic changes in USART driver (Andy)
- Apply Acks on reset driver & bindings (Philipp & Rob)
Changes since v3:
-----------------
- Fix and simplify error path in ARMv7-M Systick driver (Daniel)
- Improve reset bindings documentation (Philipp)
- Fix trailing lines anf typos in reset driver & doc (Philipp & Chanwoo)
- Fix MODULE_LICENCE in USART driver (Paul)
- Refactor USART baudrate calculation (Peter & Andy)
- Fix error path in USART init (Peter & Russell)
- Fix HW flow control in USART driver (Peter)
- Fix serial port type number to unused one (Peter)
- Applies Chanwoo's Tested-by on the series
Changes since v2:
-----------------
- Remove pinctrl driver from the series.
- Remove reset_controller_of_init(), and reset the timers in the bootloader
- Add HW flow contrl property for serial driver
- Lots of changes in the DTS file, as per Andreas recommendations
- Some Kconfig clean-ups
- Adapt the config to be compatible with Andreas' bootwrapper, except UART port.
- Various fixes in documentation
Changes since v1:
-----------------
- Move bindings documentation in their own patches (Andreas)
- Rename ARM System timer to armv7m-systick (Rob)
- Add clock-frequency property handling in armv7m-systick (Rob)
- Re-factor the reset controllers into a single controller (Philipp)
- Add kerneldoc to reset_controller_of_init (Philipp)
- Add named constants in include/dt-bindings/reset/ (Philipp)
- Make pinctrl driver to depend on ARCH_STM32 or COMPILE_TEST (Geert)
- Introduce CPUV7M_NUM_IRQ config flag to indicate the number of interrupts
supported by the MCU, in order to limit memory waste in vectors' table (Uwe)
Maxime Coquelin (15):
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP
Kernel
ARM: ARMv7-M: Enlarge vector table up to 256 entries
dt-bindings: Document the ARM System timer bindings
clocksource/drivers: Add ARM System timer driver
dt-bindings: Document the STM32 reset bindings
drivers: reset: Add STM32 reset driver
dt-bindings: Document the STM32 timer bindings
clockevents/drivers: Add STM32 Timer driver
dt-bindings: Document the STM32 USART bindings
serial: stm32-usart: Add STM32 USART Driver
ARM: Add STM32 family machine
ARM: dts: Add ARM System timer as clockevent in armv7m
ARM: dts: Introduce STM32F429 MCU
ARM: configs: Add STM32 defconfig
MAINTAINERS: Add entry for STM32 MCUs
Documentation/arm/stm32/overview.txt | 32 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 +
.../devicetree/bindings/arm/armv7m_systick.txt | 26 +
.../devicetree/bindings/reset/st,stm32-rcc.txt | 107 +++
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 +
.../devicetree/bindings/timer/st,stm32-timer.txt | 22 +
MAINTAINERS | 8 +
arch/arm/Kconfig | 18 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 6 +
arch/arm/boot/dts/stm32f429-disco.dts | 71 ++
arch/arm/boot/dts/stm32f429.dtsi | 226 +++++++
arch/arm/configs/stm32_defconfig | 71 ++
arch/arm/kernel/entry-v7m.S | 13 +-
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 3 +
arch/arm/mach-stm32/board-dt.c | 19 +
arch/arm/mm/Kconfig | 15 +
drivers/clocksource/Kconfig | 15 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/armv7m_systick.c | 79 +++
drivers/clocksource/timer-stm32.c | 184 ++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32.c | 124 ++++
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 735 +++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
scripts/link-vmlinux.sh | 2 +-
30 files changed, 1852 insertions(+), 5 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
create mode 100644 arch/arm/configs/stm32_defconfig
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
create mode 100644 drivers/clocksource/armv7m_systick.c
create mode 100644 drivers/clocksource/timer-stm32.c
create mode 100644 drivers/reset/reset-stm32.c
create mode 100644 drivers/tty/serial/stm32-usart.c
--
1.9.1
next reply other threads:[~2015-04-07 16:30 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-07 16:30 Maxime Coquelin [this message]
2015-04-07 16:30 ` [PATCH v6 00/15] Add support to STMicroelectronics STM32 family Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 01/15] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 02/15] ARM: ARMv7-M: Enlarge vector table up to 256 entries Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
[not found] ` <1428424234-28572-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-04-07 16:30 ` [PATCH v6 03/15] dt-bindings: Document the ARM System timer bindings Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 07/15] dt-bindings: Document the STM32 " Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 09/15] dt-bindings: Document the STM32 USART bindings Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 19:26 ` Rob Herring
2015-04-07 19:26 ` Rob Herring
2015-04-07 19:26 ` Rob Herring
2015-04-07 16:30 ` [PATCH v6 10/15] serial: stm32-usart: Add STM32 USART Driver Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
[not found] ` <1428424234-28572-11-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-04-07 16:36 ` Andy Shevchenko
2015-04-07 16:36 ` Andy Shevchenko
2015-04-07 16:36 ` Andy Shevchenko
2015-04-07 16:51 ` Andreas Färber
2015-04-07 16:51 ` Andreas Färber
2015-04-07 16:51 ` Andreas Färber
2015-04-07 17:05 ` Peter Hurley
2015-04-07 17:05 ` Peter Hurley
2015-04-07 17:05 ` Peter Hurley
2015-04-09 13:04 ` Vladimir Zapolskiy
2015-04-09 13:04 ` Vladimir Zapolskiy
2015-04-09 13:04 ` Vladimir Zapolskiy
2015-04-09 13:04 ` Vladimir Zapolskiy
[not found] ` <552678E7.4040107-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2015-04-28 12:13 ` Maxime Coquelin
2015-04-28 12:13 ` Maxime Coquelin
2015-04-28 12:13 ` Maxime Coquelin
2015-04-08 9:14 ` [PATCH v6 00/15] Add support to STMicroelectronics STM32 family Maxime Coquelin
2015-04-08 9:14 ` Maxime Coquelin
2015-04-08 9:14 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 04/15] clocksource/drivers: Add ARM System timer driver Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
[not found] ` <1428424234-28572-5-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-04-09 10:52 ` Daniel Lezcano
2015-04-09 10:52 ` Daniel Lezcano
2015-04-09 10:52 ` Daniel Lezcano
2015-04-07 16:30 ` [PATCH v6 05/15] dt-bindings: Document the STM32 reset bindings Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 06/15] drivers: reset: Add STM32 reset driver Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 08/15] clockevents/drivers: Add STM32 Timer driver Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 11/15] ARM: Add STM32 family machine Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 12/15] ARM: dts: Add ARM System timer as clockevent in armv7m Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 13/15] ARM: dts: Introduce STM32F429 MCU Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 14/15] ARM: configs: Add STM32 defconfig Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` [PATCH v6 15/15] MAINTAINERS: Add entry for STM32 MCUs Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
2015-04-07 16:30 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428424234-28572-1-git-send-email-mcoquelin.stm32@gmail.com \
--to=mcoquelin.stm32-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=Nikolay.Borisov-5wv7dgnIgG8@public.gmane.org \
--cc=afaerber-l3A5Bk7waGM@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=corbet-T1hC0tSOHrs@public.gmane.org \
--cc=crope-X3B1VOXEql0@public.gmane.org \
--cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org \
--cc=jslaby-AlSwsSmVLrQ@public.gmane.org \
--cc=keescook-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arch-u79uwXL29TZNg+MwTxZMZA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mchehab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \
--cc=mmarek-AlSwsSmVLrQ@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org \
--cc=peter-WaGBZJeGNqdsbIuE7sb01tBPR1lH4CV8@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org \
--cc=stefan-XLVq0VzYD2Y@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.