* [U-Boot] [PATCH 3/6] ARMv7M: add STM32F1 support
2015-04-14 18:07 [U-Boot] [PATCH 0/6] Add ARMv7M STM32F1 and STM3210E-EVAL board support Matt Porter
2015-04-14 18:07 ` [U-Boot] [PATCH 1/6] image: fix build when CONFIG_NR_DRAM_BANKS is disabled on ARM Matt Porter
2015-04-14 18:07 ` [U-Boot] [PATCH 2/6] common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec() Matt Porter
@ 2015-04-14 18:07 ` Matt Porter
2015-04-14 18:07 ` [U-Boot] [PATCH 4/6] gpio: stm32: add stm32f1 support Matt Porter
` (2 subsequent siblings)
5 siblings, 0 replies; 14+ messages in thread
From: Matt Porter @ 2015-04-14 18:07 UTC (permalink / raw)
To: u-boot
Add ARMv7M STM32F1 support including clocks, timer, gpio, and flash.
Signed-off-by: Matt Porter <mporter@konsulko.com>
---
arch/arm/cpu/armv7m/Makefile | 1 +
arch/arm/cpu/armv7m/stm32f1/Makefile | 13 ++
arch/arm/cpu/armv7m/stm32f1/clock.c | 195 ++++++++++++++++++++++++++++++
arch/arm/cpu/armv7m/stm32f1/flash.c | 179 +++++++++++++++++++++++++++
arch/arm/cpu/armv7m/stm32f1/soc.c | 35 ++++++
arch/arm/cpu/armv7m/stm32f1/timer.c | 120 ++++++++++++++++++
arch/arm/include/asm/arch-stm32f1/gpio.h | 117 ++++++++++++++++++
arch/arm/include/asm/arch-stm32f1/stm32.h | 115 ++++++++++++++++++
include/flash.h | 1 +
9 files changed, 776 insertions(+)
create mode 100644 arch/arm/cpu/armv7m/stm32f1/Makefile
create mode 100644 arch/arm/cpu/armv7m/stm32f1/clock.c
create mode 100644 arch/arm/cpu/armv7m/stm32f1/flash.c
create mode 100644 arch/arm/cpu/armv7m/stm32f1/soc.c
create mode 100644 arch/arm/cpu/armv7m/stm32f1/timer.c
create mode 100644 arch/arm/include/asm/arch-stm32f1/gpio.h
create mode 100644 arch/arm/include/asm/arch-stm32f1/stm32.h
diff --git a/arch/arm/cpu/armv7m/Makefile b/arch/arm/cpu/armv7m/Makefile
index b662e03..93a1956 100644
--- a/arch/arm/cpu/armv7m/Makefile
+++ b/arch/arm/cpu/armv7m/Makefile
@@ -8,4 +8,5 @@
extra-y := start.o
obj-y += cpu.o
+obj-$(CONFIG_STM32F1) += stm32f1/
obj-$(CONFIG_STM32F4) += stm32f4/
diff --git a/arch/arm/cpu/armv7m/stm32f1/Makefile b/arch/arm/cpu/armv7m/stm32f1/Makefile
new file mode 100644
index 0000000..7b43761
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2015
+# Kamil Lulko, <rev13@wp.pl>
+#
+# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += soc.o clock.o timer.o flash.o
diff --git a/arch/arm/cpu/armv7m/stm32f1/clock.c b/arch/arm/cpu/armv7m/stm32f1/clock.c
new file mode 100644
index 0000000..b921eff
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/clock.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * (C) Copyright 2014
+ * STMicroelectronics
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+
+#define RCC_CR_HSION (1 << 0)
+#define RCC_CR_HSEON (1 << 16)
+#define RCC_CR_HSERDY (1 << 17)
+#define RCC_CR_HSEBYP (1 << 18)
+#define RCC_CR_CSSON (1 << 19)
+#define RCC_CR_PLLON (1 << 24)
+#define RCC_CR_PLLRDY (1 << 25)
+
+#define RCC_CFGR_PLLMUL_MASK 0x3C0000
+#define RCC_CFGR_PLLMUL_SHIFT 18
+#define RCC_CFGR_PLLSRC_HSE (1 << 16)
+
+#define RCC_CFGR_AHB_PSC_MASK 0xF0
+#define RCC_CFGR_APB1_PSC_MASK 0x700
+#define RCC_CFGR_APB2_PSC_MASK 0x3800
+#define RCC_CFGR_SW0 (1 << 0)
+#define RCC_CFGR_SW1 (1 << 1)
+#define RCC_CFGR_SW_MASK 0x3
+#define RCC_CFGR_SW_HSI 0
+#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
+#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
+#define RCC_CFGR_SWS0 (1 << 2)
+#define RCC_CFGR_SWS1 (1 << 3)
+#define RCC_CFGR_SWS_MASK 0xC
+#define RCC_CFGR_SWS_HSI 0
+#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
+#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
+#define RCC_CFGR_HPRE_SHIFT 4
+#define RCC_CFGR_PPRE1_SHIFT 8
+#define RCC_CFGR_PPRE2_SHIFT 11
+
+#define RCC_APB1ENR_PWREN (1 << 28)
+
+#define PWR_CR_VOS0 (1 << 14)
+#define PWR_CR_VOS1 (1 << 15)
+#define PWR_CR_VOS_MASK 0xC000
+#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1)
+#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1)
+#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0)
+
+#define FLASH_ACR_WS(n) n
+#define FLASH_ACR_PRFTEN (1 << 8)
+#define FLASH_ACR_ICEN (1 << 9)
+#define FLASH_ACR_DCEN (1 << 10)
+
+struct psc {
+ u8 ahb_psc;
+ u8 apb1_psc;
+ u8 apb2_psc;
+};
+
+#define AHB_PSC_1 0
+#define AHB_PSC_2 0x8
+#define AHB_PSC_4 0x9
+#define AHB_PSC_8 0xA
+#define AHB_PSC_16 0xB
+#define AHB_PSC_64 0xC
+#define AHB_PSC_128 0xD
+#define AHB_PSC_256 0xE
+#define AHB_PSC_512 0xF
+
+#define APB_PSC_1 0
+#define APB_PSC_2 0x4
+#define APB_PSC_4 0x5
+#define APB_PSC_8 0x6
+#define APB_PSC_16 0x7
+
+#if !defined(CONFIG_STM32_HSE_HZ)
+#error "CONFIG_STM32_HSE_HZ not defined!"
+#else
+#if (CONFIG_STM32_HSE_HZ == 8000000)
+#define RCC_CFGR_PLLMUL_CFG 0x7
+struct psc psc_hse = {
+ .ahb_psc = AHB_PSC_1,
+ .apb1_psc = APB_PSC_2,
+ .apb2_psc = APB_PSC_1
+};
+#else
+#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
+#endif
+#endif
+
+int configure_clocks(void)
+{
+ /* Reset RCC configuration */
+ setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
+ writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
+ clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
+ | RCC_CR_PLLON));
+ clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
+ writel(0, &STM32_RCC->cir); /* Disable all interrupts */
+
+ /* Configure for HSE+PLL operation */
+ setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
+ while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
+ ;
+
+ /* Enable high performance mode, System frequency up to 168 MHz */
+ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
+ writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
+
+ setbits_le32(&STM32_RCC->cfgr,
+ RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT);
+ setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE);
+ setbits_le32(&STM32_RCC->cfgr, ((
+ psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT)
+ | (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
+ | (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
+
+ setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
+
+ while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
+ ;
+
+ /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */
+ writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN
+ | FLASH_ACR_DCEN, &STM32_FLASH->acr);
+
+ clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
+ setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
+
+ while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
+ RCC_CFGR_SWS_PLL)
+ ;
+
+ return 0;
+}
+
+unsigned long clock_get(enum clock clck)
+{
+ u32 sysclk = 0;
+ u32 shift = 0;
+ /* PLL table lookups for clock computation */
+ u8 pll_mul_table[16] = {
+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16
+ };
+ /* Prescaler table lookups for clock computation */
+ u8 ahb_psc_table[16] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
+ };
+ u8 apb_psc_table[8] = {
+ 0, 0, 0, 0, 1, 2, 3, 4
+ };
+
+ if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
+ RCC_CFGR_SWS_PLL) {
+ u16 pll;
+ pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK)
+ >> RCC_CFGR_PLLMUL_SHIFT);
+ sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll];
+ }
+
+ switch (clck) {
+ case CLOCK_CORE:
+ return sysclk;
+ break;
+ case CLOCK_AHB:
+ shift = ahb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
+ >> RCC_CFGR_HPRE_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ case CLOCK_APB1:
+ shift = apb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
+ >> RCC_CFGR_PPRE1_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ case CLOCK_APB2:
+ shift = apb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
+ >> RCC_CFGR_PPRE2_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ default:
+ return 0;
+ break;
+ }
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/flash.c b/arch/arm/cpu/armv7m/stm32f1/flash.c
new file mode 100644
index 0000000..b1ee1d9
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/flash.c
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+
+#define STM32_FLASH_KEY1 0x45670123
+#define STM32_FLASH_KEY2 0xcdef89ab
+
+#define STM32_NUM_BANKS 2
+#define STM32_MAX_BANK 0x200
+
+flash_info_t flash_info[STM32_NUM_BANKS];
+static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS];
+
+static void stm32f1_flash_lock(u8 bank, u8 lock)
+{
+ if (lock) {
+ setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK);
+ } else {
+ writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr);
+ writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr);
+ }
+}
+
+/* Only XL devices are supported (2 KiB sector size) */
+unsigned long flash_init(void)
+{
+ u8 i, banks;
+ u16 j, size;
+
+ /* Set up accessors for XL devices with wonky register layout */
+ flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr;
+ flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2;
+
+ /*
+ * Get total flash size (in KiB) and configure number of banks
+ * present and sector count per bank.
+ */
+ size = readw(&STM32_DES->flash_size);
+ if (size <= STM32_MAX_BANK) {
+ banks = 1;
+ flash_info[0].sector_count = size >> 1;
+ } else if (size > STM32_MAX_BANK) {
+ banks = 2;
+ flash_info[0].sector_count = STM32_MAX_BANK >> 1;
+ flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1;
+ }
+
+ /* Configure start/size for all sectors */
+ for (i = 0; i < banks; i++) {
+ flash_info[i].flash_id = FLASH_STM32F1;
+ flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19);
+ flash_info[i].size = 2048;
+ for (j = 1; (j < flash_info[i].sector_count); j++) {
+ flash_info[i].start[j] = flash_info[i].start[j - 1]
+ + 2048;
+ flash_info[i].size += 2048;
+ }
+ }
+
+ return size << 10;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Missing or unknown FLASH type\n");
+ return;
+ } else if (info->flash_id == FLASH_STM32F1) {
+ printf("STM32F1 Embedded Flash\n");
+ }
+
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf("\n");
+ return;
+}
+
+int flash_erase(flash_info_t *info, int first, int last)
+{
+ u8 bank = 0xff;
+ int i;
+
+ for (i = 0; i < STM32_NUM_BANKS; i++) {
+ if (info == &flash_info[i]) {
+ bank = i;
+ break;
+ }
+ }
+ if (bank == 0xff)
+ return -1;
+
+ stm32f1_flash_lock(bank, 0);
+
+ for (i = first; i <= last; i++) {
+ while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+ ;
+
+ setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
+
+ writel(info->start[i], &flash_bank[bank]->ar);
+
+ setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT);
+
+ while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+ ;
+ }
+
+ clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
+
+ stm32f1_flash_lock(bank, 1);
+
+ return 0;
+}
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong i;
+ u8 bank = 0xff;
+
+ if (addr & 1) {
+ printf("Flash address must be half word aligned\n");
+ return -1;
+ }
+
+ if (cnt & 1) {
+ printf("Flash length must be half word aligned\n");
+ return -1;
+ }
+
+ for (i = 0; i < 2; i++) {
+ if (info == &flash_info[i]) {
+ bank = i;
+ break;
+ }
+ }
+
+ if (bank == 0xff)
+ return -1;
+
+ while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+ ;
+
+ stm32f1_flash_lock(bank, 0);
+
+ setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
+
+ /* STM32F1 requires half word writes */
+ for (i = 0; i < cnt >> 1; i++) {
+ *(u16 *)(addr + i * 2) = ((u16 *)src)[i];
+ while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+ ;
+ }
+
+ clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
+
+ stm32f1_flash_lock(bank, 1);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/soc.c b/arch/arm/cpu/armv7m/stm32f1/soc.c
new file mode 100644
index 0000000..ecb1269
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/soc.c
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+
+u32 get_cpu_rev(void)
+{
+ return 0;
+}
+
+int arch_cpu_init(void)
+{
+ configure_clocks();
+
+ /*
+ * Configure the memory protection unit (MPU) to allow full access to
+ * the whole 4GB address space.
+ */
+ writel(0, &V7M_MPU->rnr);
+ writel(0, &V7M_MPU->rbar);
+ writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB
+ | V7M_MPU_RASR_EN), &V7M_MPU->rasr);
+ writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/timer.c b/arch/arm/cpu/armv7m/stm32f1/timer.c
new file mode 100644
index 0000000..67bb87e
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/timer.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define STM32_TIM2_BASE (STM32_APB1PERIPH_BASE + 0x0000)
+
+#define RCC_APB1ENR_TIM2EN (1 << 0)
+
+struct stm32_tim2_5 {
+ u32 cr1;
+ u32 cr2;
+ u32 smcr;
+ u32 dier;
+ u32 sr;
+ u32 egr;
+ u32 ccmr1;
+ u32 ccmr2;
+ u32 ccer;
+ u32 cnt;
+ u32 psc;
+ u32 arr;
+ u32 reserved1;
+ u32 ccr1;
+ u32 ccr2;
+ u32 ccr3;
+ u32 ccr4;
+ u32 reserved2;
+ u32 dcr;
+ u32 dmar;
+ u32 or;
+};
+
+#define TIM_CR1_CEN (1 << 0)
+
+#define TIM_EGR_UG (1 << 0)
+
+int timer_init(void)
+{
+ struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+
+ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
+
+ if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1))
+ writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1,
+ &tim->psc);
+ else
+ writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1,
+ &tim->psc);
+
+ writel(0xFFFFFFFF, &tim->arr);
+ writel(TIM_CR1_CEN, &tim->cr1);
+ setbits_le32(&tim->egr, TIM_EGR_UG);
+
+ gd->arch.tbl = 0;
+ gd->arch.tbu = 0;
+ gd->arch.lastinc = 0;
+
+ return 0;
+}
+
+ulong get_timer(ulong base)
+{
+ return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base;
+}
+
+unsigned long long get_ticks(void)
+{
+ struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+ u32 now;
+
+ now = readl(&tim->cnt);
+
+ if (now >= gd->arch.lastinc)
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ else
+ gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+
+ gd->arch.lastinc = now;
+
+ return gd->arch.tbl;
+}
+
+void reset_timer(void)
+{
+ struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+
+ gd->arch.lastinc = readl(&tim->cnt);
+ gd->arch.tbl = 0;
+}
+
+/* delay x useconds */
+void __udelay(ulong usec)
+{
+ unsigned long long start;
+
+ start = get_ticks(); /* get current timestamp */
+ while ((get_ticks() - start) < usec)
+ ; /* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ_CLOCK;
+}
diff --git a/arch/arm/include/asm/arch-stm32f1/gpio.h b/arch/arm/include/asm/arch-stm32f1/gpio.h
new file mode 100644
index 0000000..bd5fbaf
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f1/gpio.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur at emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+enum stm32_gpio_port {
+ STM32_GPIO_PORT_A = 0,
+ STM32_GPIO_PORT_B,
+ STM32_GPIO_PORT_C,
+ STM32_GPIO_PORT_D,
+ STM32_GPIO_PORT_E,
+ STM32_GPIO_PORT_F,
+ STM32_GPIO_PORT_G,
+};
+
+enum stm32_gpio_pin {
+ STM32_GPIO_PIN_0 = 0,
+ STM32_GPIO_PIN_1,
+ STM32_GPIO_PIN_2,
+ STM32_GPIO_PIN_3,
+ STM32_GPIO_PIN_4,
+ STM32_GPIO_PIN_5,
+ STM32_GPIO_PIN_6,
+ STM32_GPIO_PIN_7,
+ STM32_GPIO_PIN_8,
+ STM32_GPIO_PIN_9,
+ STM32_GPIO_PIN_10,
+ STM32_GPIO_PIN_11,
+ STM32_GPIO_PIN_12,
+ STM32_GPIO_PIN_13,
+ STM32_GPIO_PIN_14,
+ STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_icnf {
+ STM32_GPIO_ICNF_AN = 0,
+ STM32_GPIO_ICNF_IN_FLT,
+ STM32_GPIO_ICNF_IN_PUD,
+ STM32_GPIO_ICNF_RSVD
+};
+
+enum stm32_gpio_ocnf {
+ STM32_GPIO_OCNF_GP_PP = 0,
+ STM32_GPIO_OCNF_GP_OD,
+ STM32_GPIO_OCNF_AF_PP,
+ STM32_GPIO_OCNF_AF_OD
+};
+
+enum stm32_gpio_pupd {
+ STM32_GPIO_PUPD_DOWN = 0,
+ STM32_GPIO_PUPD_UP,
+};
+
+enum stm32_gpio_mode {
+ STM32_GPIO_MODE_IN = 0,
+ STM32_GPIO_MODE_OUT_10M,
+ STM32_GPIO_MODE_OUT_2M,
+ STM32_GPIO_MODE_OUT_50M
+};
+
+enum stm32_gpio_af {
+ STM32_GPIO_AF0 = 0,
+ STM32_GPIO_AF1,
+ STM32_GPIO_AF2,
+ STM32_GPIO_AF3,
+ STM32_GPIO_AF4,
+ STM32_GPIO_AF5,
+ STM32_GPIO_AF6,
+ STM32_GPIO_AF7,
+ STM32_GPIO_AF8,
+ STM32_GPIO_AF9,
+ STM32_GPIO_AF10,
+ STM32_GPIO_AF11,
+ STM32_GPIO_AF12,
+ STM32_GPIO_AF13,
+ STM32_GPIO_AF14,
+ STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+ enum stm32_gpio_port port;
+ enum stm32_gpio_pin pin;
+};
+
+struct stm32_gpio_ctl {
+ enum stm32_gpio_icnf icnf;
+ enum stm32_gpio_ocnf ocnf;
+ enum stm32_gpio_mode mode;
+ enum stm32_gpio_pupd pupd;
+ enum stm32_gpio_af af;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+ return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+ return gpio % 16;
+}
+
+int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
+ const struct stm32_gpio_ctl *gpio_ctl);
+int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h
new file mode 100644
index 0000000..5910d62
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f1/stm32.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur at emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _MACH_STM32_H_
+#define _MACH_STM32_H_
+
+/*
+ * Peripheral memory map
+ */
+#define STM32_PERIPH_BASE 0x40000000
+#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000)
+#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000)
+#define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00018000)
+
+#define STM32_BUS_MASK 0xFFFF0000
+
+/*
+ * Register maps
+ */
+struct stm32_des_regs {
+ u16 flash_size;
+ u16 pad1;
+ u32 pad2;
+ u32 uid0;
+ u32 uid1;
+ u32 uid2;
+};
+
+struct stm32_rcc_regs {
+ u32 cr; /* RCC clock control */
+ u32 cfgr; /* RCC clock configuration */
+ u32 cir; /* RCC clock interrupt */
+ u32 apb2rstr; /* RCC APB2 peripheral reset */
+ u32 apb1rstr; /* RCC APB1 peripheral reset */
+ u32 ahbenr; /* RCC AHB peripheral clock enable */
+ u32 apb2enr; /* RCC APB2 peripheral clock enable */
+ u32 apb1enr; /* RCC APB1 peripheral clock enable */
+ u32 bdcr; /* RCC Backup domain control */
+ u32 csr; /* RCC clock control & status */
+};
+
+struct stm32_pwr_regs {
+ u32 cr;
+ u32 csr;
+};
+
+struct stm32_flash_regs {
+ u32 acr;
+ u32 keyr;
+ u32 optkeyr;
+ u32 sr;
+ u32 cr;
+ u32 ar;
+ u32 rsvd1; /* Reserved */
+ u32 obr;
+ u32 wrpr;
+ u32 rsvd2[8]; /* Reserved */
+ u32 keyr2;
+ u32 rsvd3;
+ u32 sr2;
+ u32 cr2;
+ u32 ar2;
+};
+
+/* Per bank register set for XL devices */
+struct stm32_flash_bank_regs {
+ u32 keyr;
+ u32 rsvd; /* Reserved */
+ u32 sr;
+ u32 cr;
+ u32 ar;
+};
+
+/*
+ * Registers access macros
+ */
+#define STM32_DES_BASE (0x1ffff7e0)
+#define STM32_DES ((struct stm32_des_regs *)STM32_DES_BASE)
+
+#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x9000)
+#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE)
+
+#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000)
+#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE)
+
+#define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0xa000)
+#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE)
+
+#define STM32_FLASH_SR_BSY (1 << 0)
+
+#define STM32_FLASH_CR_PG (1 << 0)
+#define STM32_FLASH_CR_PER (1 << 1)
+#define STM32_FLASH_CR_STRT (1 << 6)
+#define STM32_FLASH_CR_LOCK (1 << 7)
+
+enum clock {
+ CLOCK_CORE,
+ CLOCK_AHB,
+ CLOCK_APB1,
+ CLOCK_APB2
+};
+
+int configure_clocks(void);
+unsigned long clock_get(enum clock clck);
+
+#endif /* _MACH_STM32_H_ */
diff --git a/include/flash.h b/include/flash.h
index 48aa3a5..5754cf9 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -460,6 +460,7 @@ extern flash_info_t *flash_get_info(ulong base);
#define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */
#define FLASH_STM32F4 0x00F2 /* STM32F4 Embedded Flash */
+#define FLASH_STM32F1 0x00F3 /* STM32F1 Embedded Flash */
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
--
2.1.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH 6/6] board: add stm3210e-eval board support
2015-04-14 18:07 [U-Boot] [PATCH 0/6] Add ARMv7M STM32F1 and STM3210E-EVAL board support Matt Porter
` (4 preceding siblings ...)
2015-04-14 18:07 ` [U-Boot] [PATCH 5/6] serial: " Matt Porter
@ 2015-04-14 18:07 ` Matt Porter
5 siblings, 0 replies; 14+ messages in thread
From: Matt Porter @ 2015-04-14 18:07 UTC (permalink / raw)
To: u-boot
Add support for the STM32F1-based stm3210e-eval boards
from ST. UART, Flash, GPIO, and LEDs are supported.
Signed-off-by: Matt Porter <mporter@konsulko.com>
---
arch/arm/Kconfig | 5 ++
board/st/stm3210e-eval/Kconfig | 19 ++++++
board/st/stm3210e-eval/MAINTAINERS | 5 ++
board/st/stm3210e-eval/Makefile | 13 ++++
board/st/stm3210e-eval/stm3210e-eval.c | 85 ++++++++++++++++++++++++
configs/stm3210e-eval_defconfig | 3 +
include/configs/stm3210e-eval.h | 117 +++++++++++++++++++++++++++++++++
7 files changed, 247 insertions(+)
create mode 100644 board/st/stm3210e-eval/Kconfig
create mode 100644 board/st/stm3210e-eval/MAINTAINERS
create mode 100644 board/st/stm3210e-eval/Makefile
create mode 100644 board/st/stm3210e-eval/stm3210e-eval.c
create mode 100644 configs/stm3210e-eval_defconfig
create mode 100644 include/configs/stm3210e-eval.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4eb047c..bcf4e46 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -731,6 +731,10 @@ config ARCH_UNIPHIER
select SPL
select OF_CONTROL
+config TARGET_STM3210E_EVAL
+ bool "Support STM3210E-EVAL board"
+ select CPU_V7M
+
config TARGET_STM32F429_DISCOVERY
bool "Support STM32F429 Discovery"
select CPU_V7M
@@ -872,6 +876,7 @@ source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st-ericsson/snowball/Kconfig"
source "board/st-ericsson/u8500/Kconfig"
+source "board/st/stm3210e-eval/Kconfig"
source "board/st/stm32f429-discovery/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/sunxi/Kconfig"
diff --git a/board/st/stm3210e-eval/Kconfig b/board/st/stm3210e-eval/Kconfig
new file mode 100644
index 0000000..49bc770
--- /dev/null
+++ b/board/st/stm3210e-eval/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STM3210E_EVAL
+
+config SYS_BOARD
+ string
+ default "stm3210e-eval"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stm32f1"
+
+config SYS_CONFIG_NAME
+ string
+ default "stm3210e-eval"
+
+endif
diff --git a/board/st/stm3210e-eval/MAINTAINERS b/board/st/stm3210e-eval/MAINTAINERS
new file mode 100644
index 0000000..0f9f31b
--- /dev/null
+++ b/board/st/stm3210e-eval/MAINTAINERS
@@ -0,0 +1,5 @@
+M: Matt Porter <mporter@konsulko.com>
+S: Maintained
+F: board/st/stm3210e-eval/
+F: include/configs/stm3210e-eval.h
+F: configs/stm3210e-eval_defconfig
diff --git a/board/st/stm3210e-eval/Makefile b/board/st/stm3210e-eval/Makefile
new file mode 100644
index 0000000..b018e08
--- /dev/null
+++ b/board/st/stm3210e-eval/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2015
+# Kamil Lulko, <rev13@wp.pl>
+#
+# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := stm3210e-eval.o
diff --git a/board/st/stm3210e-eval/stm3210e-eval.c b/board/st/stm3210e-eval/stm3210e-eval.c
new file mode 100644
index 0000000..a801983
--- /dev/null
+++ b/board/st/stm3210e-eval/stm3210e-eval.c
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2011, 2012, 2013
+ * Yuri Tikhonov, Emcraft Systems, yur at emcraft.com
+ * Alexander Potashev, Emcraft Systems, aspotashev at emcraft.com
+ * Vladimir Khusainov, Emcraft Systems, vlad at emcraft.com
+ * Pavel Boldin, Emcraft Systems, paboldin at emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct stm32_gpio_ctl gpio_ctl_usart[] = {
+ /* TX */
+ {
+ .mode = STM32_GPIO_MODE_OUT_50M,
+ .ocnf = STM32_GPIO_OCNF_AF_PP,
+ },
+ /* RX */
+ {
+ .mode = STM32_GPIO_MODE_IN,
+ .icnf = STM32_GPIO_ICNF_IN_FLT,
+ }
+};
+
+static const struct stm32_gpio_dsc usart1_gpio[] = {
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_10}, /* RX */
+};
+
+int uart2_setup_gpio(void)
+{
+ int i;
+ int rv = 0;
+
+ for (i = 0; i < ARRAY_SIZE(usart1_gpio); i++) {
+ rv = stm32_gpio_config(&usart1_gpio[i], &gpio_ctl_usart[i]);
+ if (rv)
+ goto out;
+ }
+
+out:
+ return rv;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_RAM_SIZE;
+
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ int res;
+
+ res = uart2_setup_gpio();
+ if (res)
+ return res;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
diff --git a/configs/stm3210e-eval_defconfig b/configs/stm3210e-eval_defconfig
new file mode 100644
index 0000000..ac3cad3
--- /dev/null
+++ b/configs/stm3210e-eval_defconfig
@@ -0,0 +1,3 @@
+CONFIG_ARM=y
+CONFIG_TARGET_STM3210E_EVAL=y
+CONFIG_CMD_BOOTM=n
diff --git a/include/configs/stm3210e-eval.h b/include/configs/stm3210e-eval.h
new file mode 100644
index 0000000..295c472
--- /dev/null
+++ b/include/configs/stm3210e-eval.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_STM32F1
+#define CONFIG_STM3210E_EVAL
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x20010000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_RAM_SIZE 0x00018000
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_LOAD_ADDR 0x20000000
+#define CONFIG_LOADADDR 0x20000000
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET (64 << 10)
+#define CONFIG_ENV_SECT_SIZE (2 << 10)
+#define CONFIG_ENV_SIZE (2 << 10)
+#define CONFIG_ENV_MAX_ENTRIES 32
+
+#define CONFIG_GPIO_LED
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_BIT 86 /* LD1 - Green */
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10)
+#define STATUS_LED_BIT1 87 /* LD2 - Orange */
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10)
+#define STATUS_LED_BIT2 88 /* LD3 - Red */
+#define STATUS_LED_STATE2 STATUS_LED_OFF
+#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10)
+#define STATUS_LED_BIT3 89 /* LD4 - Blue */
+#define STATUS_LED_STATE3 STATUS_LED_OFF
+#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10)
+
+#define CONFIG_STM32_GPIO
+#define CONFIG_STM32_SERIAL
+#define CONFIG_STM32_USART1
+
+#define CONFIG_STM32_HSE_HZ 8000000
+
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked@1MHz */
+
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MAXARGS 16
+
+#define CONFIG_SYS_MALLOC_LEN (2048)
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_BARGSIZE 64
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_AUTOBOOT
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#undef CONFIG_CMD_BDI /* bdinfo */
+#undef CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */
+#undef CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#undef CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
+#define CONFIG_CRC32
+
+#undef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "STM3210E-EVAL> "
+#undef CONFIG_AUTO_COMPLETE
+#undef CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_TIMER
+#define CONFIG_CMD_LED
+
+#undef CONFIG_BOOTM_LINUX
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+#undef CONFIG_BOOTM_VXWORKS
+
+#undef CONFIG_GZIP
+#undef CONFIG_ZLIB
+#undef CONFIG_PARTITIONS
+
+
+#endif /* __CONFIG_H */
--
2.1.0
^ permalink raw reply related [flat|nested] 14+ messages in thread