[PATCH 16/18] i40e: add more virtual channel operations

[Helin Zhang <helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

Added three virtual channel operations, and assigned values to
each of them. To be consistent with base driver releases, virtual
channel operation of 'I40E_VIRTCHNL_OP_GET_ADDNL_SOL_CONFIG' and
its relevant structure were added.

Signed-off-by: Helin Zhang <helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 lib/librte_pmd_i40e/i40e/i40e_virtchnl.h | 61 +++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 21 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e/i40e_virtchnl.h b/lib/librte_pmd_i40e/i40e/i40e_virtchnl.h
index 58b4862..0fc4dd6 100644
--- a/lib/librte_pmd_i40e/i40e/i40e_virtchnl.h
+++ b/lib/librte_pmd_i40e/i40e/i40e_virtchnl.h
@@ -66,30 +66,32 @@ POSSIBILITY OF SUCH DAMAGE.
  * of the virtchnl_msg structure.
  */
 enum i40e_virtchnl_ops {
-/* VF sends req. to pf for the following
- * ops.
+/* The PF sends status change events to VFs using
+ * the I40E_VIRTCHNL_OP_EVENT opcode.
+ * VFs send requests to the PF using the other ops.
  */
 	I40E_VIRTCHNL_OP_UNKNOWN = 0,
 	I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
-	I40E_VIRTCHNL_OP_RESET_VF,
-	I40E_VIRTCHNL_OP_GET_VF_RESOURCES,
-	I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE,
-	I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE,
-	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES,
-	I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP,
-	I40E_VIRTCHNL_OP_ENABLE_QUEUES,
-	I40E_VIRTCHNL_OP_DISABLE_QUEUES,
-	I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS,
-	I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS,
-	I40E_VIRTCHNL_OP_ADD_VLAN,
-	I40E_VIRTCHNL_OP_DEL_VLAN,
-	I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE,
-	I40E_VIRTCHNL_OP_GET_STATS,
-	I40E_VIRTCHNL_OP_FCOE,
-/* PF sends status change events to vfs using
- * the following op.
- */
-	I40E_VIRTCHNL_OP_EVENT,
+	I40E_VIRTCHNL_OP_RESET_VF = 2,
+	I40E_VIRTCHNL_OP_GET_VF_RESOURCES = 3,
+	I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
+	I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
+	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
+	I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
+	I40E_VIRTCHNL_OP_ENABLE_QUEUES = 8,
+	I40E_VIRTCHNL_OP_DISABLE_QUEUES = 9,
+	I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS = 10,
+	I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS = 11,
+	I40E_VIRTCHNL_OP_ADD_VLAN = 12,
+	I40E_VIRTCHNL_OP_DEL_VLAN = 13,
+	I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
+	I40E_VIRTCHNL_OP_GET_STATS = 15,
+	I40E_VIRTCHNL_OP_FCOE = 16,
+	I40E_VIRTCHNL_OP_EVENT = 17,
+	I40E_VIRTCHNL_OP_CONFIG_RSS = 18,
+#ifdef I40E_SOL_VF_SUPPORT
+	I40E_VIRTCHNL_OP_GET_ADDNL_SOL_CONFIG = 19,
+#endif
 };
 
 /* Virtual channel message descriptor. This overlays the admin queue
@@ -282,6 +284,23 @@ struct i40e_virtchnl_ether_addr_list {
 	struct i40e_virtchnl_ether_addr list[1];
 };
 
+#ifdef I40E_SOL_VF_SUPPORT
+/* I40E_VIRTCHNL_OP_GET_ADDNL_SOL_CONFIG
+ * VF sends this message to get the default MTU and list of additional ethernet
+ * addresses it is allowed to use.
+ * PF responds with an indirect message containing
+ * i40e_virtchnl_addnl_solaris_config with zero or more
+ * i40e_virtchnl_ether_addr structures.
+ *
+ * It is expected that this operation will only ever be needed for Solaris VFs
+ * running under a Solaris PF.
+ */
+struct i40e_virtchnl_addnl_solaris_config {
+	u16 default_mtu;
+	struct i40e_virtchnl_ether_addr_list al;
+};
+
+#endif
 /* I40E_VIRTCHNL_OP_ADD_VLAN
  * VF sends this message to add one or more VLAN tag filters for receives.
  * PF adds the filters and returns status.
-- 
1.8.1.4